Tech Problem Aggregator

Is static ip suported in w10m?

Q: Is static ip suported in w10m?

I have a lumia 640 lte and I'm in the insiders programm (slow ring). Can't find the way to set a static ip. I really need this feature, any tips?
Thanks!

A: Is static ip suported in w10m?

See if this workaround solves your problem How to use Static IP in your Windows 10 Mobile! ? GIZMO NATION

1 more replies
Answer Match 51.66%

Hi
I'm looking for a way to make Internet Eplorer run under much higher resolution than my monitor supports
or to fake it when reporting its resolution to a web-based application. You see, the monitor on my desktop PC supports a max resolution of only 1920?1080 but I need to make that web-based applictation think its running under 8192x6144. Increasing dpi won't help in this case.
I am trying to print the picture with text -a map with some numbers- into a file from that server, but it will only print what is displayed in Internet Explorer window without panning/scrolling (the website print buton only supports printing current window). Thus I would be able to print the entire map into a single file (a very efficient solution), unlike now where it would take some 20 files which I would have a very hard time putting together into a single one.
Thanks alot
Jon K.

A:use resolution not suported by hardware

Does the web-based application let you save the map as a bmp or png ? You could then use Irfanview to print it.

1 more replies
Answer Match 51.24%

I have a 15z-af100 with the amd chipset setup for ubuntu 16.04 and windows 10.  can you reccomend a linux open code supported wifi card?

More replies
Answer Match 51.24%

Supported CUP by bios 9QKT39A ( ThinkCentre 71 1578 )I have 2 different sources of information from Lenovo1- https://support.lenovo.com/ca/en/documents/pd0150022- http://www.lenovo.com/shop/emea/content/pdf/desktops/thinkcentre/edge-71/en/EDGE71_DS_EN.pdf? The supported processors are different.??I try to look if the upgrade history of the bios. If it has added compatibility to more processor.?https://support.lenovo.com/ca/en/olddownloads/ds019028?itry to click to Summary of change made in previous update ?but the page goes nowhere?The connection has timed out??I  am looking for the offal, up-to-date info on  supported processors for ThinkCentre 71 1578.?? Thanks, 

More replies
Answer Match 51.24%

I have this-
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: AMD FX(tm)-8320 Eight-Core Processor, AMD64 Family 21 Model 2 Stepping 0
Processor Count: 8
RAM: 8191 Mb
Graphics Card: NVIDIA GeForce GTX 650, 1024 Mb
Hard Drives: C: Total - 953516 MB, Free - 675300 MB;
Motherboard: MSI, 760GMA-P34(FX) (MS-7641)
Antivirus: Windows Defender, Disabled
My question is.How do I enable or get it to enable? I have a camera that I need to get to it's web based setup. I type in the ip address and I get
This browser doesn't support or disable Java JRE . Get the latest Java JRE here or enable Java JRE.
message. I tried the link but can't seem to find it.
 

A:Solved: Java jre not suported or enable

13 more replies
Answer Match 50.82%

Hi every one
i want to ask some thing
" my computer hardware is not compatible with windows 7. I cant update the vedeo driver (915 gm). But i dont have much problems i notice other than waching the windows website trouble shooting vedeo.
My question is if i go on with this os in my computer can it slowly
damage the computer (machine) ,not the windows.

Please consider the facts and answer

enjoy th day
best regaurds
thank you

A:Can windows un suported hardware damage machine

I don't think you need to worry about any damages. But you will have a lot of restrictions which will make operating Win7 difficult.

7 more replies
Answer Match 45.78%

IF you compare today both versions, which do one do you think is best?

A:WM 6.5 vs W10M

For me:
Functionality: 6.5.x
UX (unskinned): WM10.x
Please join the site so you can reply in this thread. See this link for instructions on how to join Windows Central.

2 more replies
Answer Match 45.36%

It's the newbie problem of accessing a non-static method from a static context. However, I can't seem to fix the problem. The program "should" just create a PNG and JPG file of an image I created.

Here is the code:
Code:

import java.awt.image.BufferedImage;
import java.io.*;
import java.awt.Graphics2D;
import java.awt.image.RenderedImage;
import javax.imageio.ImageIO;
import java.awt.Color;
public class WriteText_PicTest {

public RenderedImage myCreateImage()
{
int width = 100; int height = 100;

// Create a buffered image in which to draw
BufferedImage bufferedImage = new BufferedImage(width, height, BufferedImage.TYPE_INT_RGB);

// Create a graphics contents on the buffered image
Graphics2D g2d = bufferedImage.createGraphics();

// Draw graphics

g2d.setColor(Color.white);
g2d.fillRect(0, 0, width, height);
g2d.setColor(Color.black);
g2d.fillOval(0, 0, width, height);

// Graphics context no longer needed so dispose it
g2d.dispose();
return bufferedImage;
}

public static void main (String args[])
{

// Create an image to save

RenderedImage rendImage = myCreateImage();

// Write generated image to a file

try {
// Save as PNG File
File file = new File("newimage.png");
ImageIO.write(rendImage, "png",... Read more

A:Solved: Newb Java Problem - non-static method cannot be accessed from static context

Just an FYI for anyone who might read this thread to find the answer to their own problem.

The solution was to make the method static. I could then use the first variable declaration 9see below) without any problem.

RenderedImage rendImage = myCreateImage();
Though, it still isn't clear to me why the method has to be static.
 

1 more replies
Answer Match 45.36%

Hi folks,

This is my first network setup and i am hoping someone can help me with some issues. The setup is as follows:

Router: Netgear DG834GT ADSL

Computer 1: (Known as Maude)

Desktop
Celeron 434MHz CPU
512 Mb RAM
XP Home SP2
Wired to Router
Has USB Hard Drive that i want to use as a central data file storage space for the network.
Computer 2: (Known as Myrtle)

Desktop
AMD Duron 1.29GHz CPU
512Mb RAM
XP Home SP2
ASUS WLAN via USB
Computer 3: (Known as Martha)

Laptop
Celeron 1.86 GHz CPU
512 Mb RAM
Vista Home Basic
802.11g Mini Card Wireless Adapter

Computer 1 is in the living room and is used for email/browsing/word processing/IM and other relatively low demand applications and is the most likely to be switched on, hence the Networked Drive being attached to it.

Computer 2 is primarily the hub of my Recording Studio (grand name for a cobbled together hobby type affair) but is also used for email etc. It is located in an outbuilding but is no more than 7meters from the router and gets signal and link strengths that rarely dip below 50% and more likely average 65%

Computer 3 is my wifes college laptop and is only really part of the network so she can use the printer attached to computer 1 and back up her files on the networked drive.

All 3 computers communicate.

The biggest problem is the data transfer speeds between Computer 2 and Computer 1.

Computer 3 connects to both the other computers at the sort of speeds i would expect/hope (i.e.i click on a shared doc... Read more

A:Two problems. Static I.P Address not static + Incredibly slow network t/fer speeds

7 more replies
Answer Match 45.36%

so I haven't used W10M in a while. How is the Uber app? Does it have the spilt ride feature? Can I share my route? Are there any features missing from Android or IOS?
Posted via the Windows Central App for Android

More replies
Answer Match 45.36%

There's a problem I can't understand. I downloaded four GBA emulators(VBA8, VBA10, Purple Cherry X, etc.) on my L640. I started a game Pokemon Emerald and was shocked. In every emu sound is distorted and makes headaches, in VBA8 fps is lower than 45fps, in VBA10 and Purple Cherry X - lower than 40 and 30 fps. By the way, VBA10 makes phone really hot, although fps is lower, sound is even worse quality and app is made for W10M so all this makes no sense, because VB8 on W10M works miles better, but it's still unacceptable. Why? Because my old PSP with 333MHz processor and 64 MB RAM emulated GBA games almost perfectly.
Okay, there could be some reasons like bad coding and small number of WP/W10M users, but, come on, even GBC games (like Pokemon Crystal) on those WP/W10M GBA emulators are not emulating great, sound is distorted too, but, at least, are listenable. But no excuses, because I emulated pokemon crystal on my iPod Nano 1st gen. which has 80MHz cpu and there is no sound distortion at all... All this just makes no sense.

A:Why emulation on W10M/WP is so bad?

It's simply because development is lacking. I hope that with the ability to port Win32 apps to the Store and all that, we get to see VBA-M soon enough.
Sent from mTalk

3 more replies
Answer Match 45.36%

Does anyone know how to create an app using windows app studio for phones. I am trying to create one with the pivot style but don't know how to. I am trying to use a url so that the app pulls the info. Is this possible? I have been able to make one with the web host but that only creates web wrap apps. If anyone has knowledge on how to make a pivot style app using windows app studio please post it here I would appreciate it.

More replies
Answer Match 44.94%

Does anyone know of a Fantasy football app for Windows 10 Mobile? The espn fantasy football app and the NFL Fantasy football app in the windows store are not working on my Lumia 950 build 14393. I was wondering if anyone is experiencing this or if someone has found another/ different app.

More replies
Answer Match 44.94%

Cortana for AU changes few things. From that in setting auto language select option is available. Australia,India,USA,UK Some country available. Currently I am using India region. 1 ) If I want cortana USA can I must download language for that? 2 )what's the difference between cortana of these region. ( any extra features on cortana of selected region from above ) Waiting for answer guys. If u use cortana daily please answer above.

More replies
Answer Match 44.94%

Cortana for AU changes few things. From that in setting auto language select option is available. Australia,India,USA,UK Some country available. Currently I am using India region. 1 ) If I want cortana USA can I must download language for that? 2 )what's the difference between cortana of these region. ( any extra features on cortana of selected region from above ) Waiting for answer guys. If u use cortana daily please answer above.

A:Cortana w10m AU question

Yes, you must download the relevant speech and language packs for each region
Difference would be each offers results closer to their own region rather than your current one - that's my opinion

more replies
Answer Match 44.94%

Hello to all I wanted to ask around to anybody who might know if Living Images is still a feature on W10M. I am not sure if I have missed anything about it, and I haven't heard much since last year when it showed up in some developer preview versions on certain phone models. I am really hoping it was not taken away from the Windows Mobile platform, as it was an awesome feature that Microsoft started (and which Apple stole). Does anybody know of it still exists on Windows 10 Mobile? Thanks for any information.

More replies
Answer Match 44.94%

Hi
is it possible to customize the outlook app, with different colors, for the different email accts?
i don't see a way, but one never knows.
i don't want all my email accts, with the same color.
different colors would make identifying emails accts. much easier.
thx!

More replies
Answer Match 44.94%

I've downloaded one, but I wanted to know what's the best app out there. The store itself is not of much help.

More replies
Answer Match 44.94%

Wife's 1520 on the latest rs2 fast ring updated. Now, edge opens then immediately closes. Anyone know of any fixes?

More replies
Answer Match 44.94%

Recently I do hard reset with Lumia 640. Store app still in old version and store not showing for store app. Any buddy please give store link so that store app get manually updated.

A:W10m store link please

Happened to me too in anniversary update for mobile.. Its not yet released for public so i had to set it to fast ring and then wait for few hours then got the updates. I do this each time i format my phone on my Lumia 640xl.

2 more replies
Answer Match 44.94%

Do you guys have issues with some websites loading on EDGE on W10M? Some websites show a blank white screen. When i go to Tomshardware.com, it says FORBIDDEN. But the websites loads just fine on UC browser. What gives?

A:Microsoft Edge on W10M

Originally Posted by slickxsparkie Do you guys have issues with some websites loading on EDGE on W10M? Some websites show a blank white screen. When i go to Tomshardware.com, it says FORBIDDEN. But the websites loads just fine on UC browser. What gives? in settings, clean cache and allow all cookies, then reboot your device

1 more replies
Answer Match 44.94%

I just bought a L650 and I notice that I'm not getting messages on SP4 from the Lumia. But I do get them from my Note 5. Any answers?

More replies
Answer Match 44.1%

Am I doing something wrong or is twitter out of the people hub now? Can't get it to synch since the app was updated?

More replies
Answer Match 44.1%

I'm using windows 10 both on my PC and phone, a lumia 640. I'm not in the insider program.
Although edge on my PC syncs and gets my favorites from my phone, my phone cannot sync and get favorites from my PC in any reliable way.
Sometimes it takes days or it fails to do so entirely.
Is there a way to force edge on my phone to sync favorites manually?

More replies
Answer Match 44.1%

Hey guys. Just wanted to see if anyone else has problems with updating their apps on RS2? Every app I try to update just says "Error, tap to see details" and an obscure error code.

A:W10m RS2, Unable to update apps.

Originally Posted by Giddora Hey guys. Just wanted to see if anyone else has problems with updating their apps on RS2? Every app I try to update just says "Error, tap to see details" and an obscure error code. first, make a soft reset

1 more replies
Answer Match 44.1%

Hello -
Yesterday our work firewall was replaced with a Fortinet device. It has been configured as an IPsec VPN. The FortiClient app for W10M appears to only have settings for a SSL-VPN.
Any ideas on how I can access our network from my phone?

A:Fortinet Firewall Access with W10M

You might have to get in touch with your work IT department to see what your options are.

1 more replies
Answer Match 44.1%

My Lumia 640 with Windows 10 (previously 1511, now 1607; I'm on Release Preview) doesn't get past Uber app version 2.5.x, but WC reports (repeatedly) on the Uber app being 3.2.x: http://www.windowscentral.com/uber-update-makes-it-easier-book-cab?_ga=1.94882716.1280883874.1469892291 .
I've tried to reinstall, uninstall-restart-install, and similar several times, I've also tried direct links to the Windows 10 app in the store, but apparently I cannot get higher than version 2.5.1. Are people using the 3.2 version? How did you get it? Any thoughts on how I can update my phone to rock the latest version?
Thoughts would be most appreciated!

A:How can I get the latest (3.2.x) version of Uber app for W10M?

Is your Store app up to date? Sometimes the Store app can cause issues. How is your connection when you try it?

3 more replies
Answer Match 43.68%

Hi it looks like Facebook, twitter, and LinkedIn all gone from w10. If I roll back to wp8 will I get them back? Thanks

More replies
Answer Match 43.68%

My mom buyed an lumia 640lte and updated it to w10m, now she have all of her contacts mixed ex: Jhon doe to dr marcus doe.

More replies
Answer Match 43.68%

It's been two years since I've done TP for mobile and I'm thinking about putting it on both my 650 and SP4. I've never done it for a pc before. Is it DD worthy?

More replies
Answer Match 43.68%

Does anyone know how to stream live sports links on w10m? I'm trying to find a app which you can add a link and it plays the stream. Alot of the streams don't play on the edge browser because there is no flash adobe. I have used kodi for the windows 10 pc/ android tablet, but I'm trying to find something that works similar for windows 10 mobile.

More replies
Answer Match 43.26%

Lot of people say the big problem the app gap. But if you can run android emulator on your phone that isn't problem. So I would like know that is possible? Unfortunatelly I don't know convert app but I hope anybody can help for me.

A:Android emulator convert to W10M with Desktop App Converter

Hi and welcome to Windows Central. There is no Android emulator for Windows 10 Mobile. Project Astoria was cancelled by Microsoft quite a while ago. Microsoft officially cancels 'Project Astoria' plans for porting Android apps to Windows 10 Mobile | Windows Central

1 more replies
Answer Match 43.26%

When i open any webpage in microsoft edge in my w10m (Lumia 640 xl with official w10m build 10586.218) and start to scroll up and down, the webpage stutters a lot and sometimes it becomes completely blank. The only way to get that webpage to normal is by entering the tabs view and then re-opening the current tab or zoom in and out inside that webpage. I have been facing this issue since a long time (since insider build 10586.63). Did a hard reset couple of times after updating to newer builds but that didn't help. Therefore rolled back to the official release but the issue is still there. Is anyone here facing this problem and is there any fix for this problem?
Note: I am using Lumia 640 xl dual sim official release build 10586.218

A:Why there is still the annoying stuttering issue in microsoft edge in w10m.

Originally Posted by Andy620 When i open any webpage in microsoft edge in my w10m (Lumia 640 xl with official w10m build 10586.218) and start to scroll up and down, the webpage stutters a lot and sometimes it becomes completely blank. The only way to get that webpage to normal is by entering the tabs view and then re-opening the current tab or zoom in and out inside that webpage. I have been facing this issue since a long time (since insider build 10586.63). Did a hard reset couple of times after updating to newer builds but that didn't help. Therefore rolled back to the official release but the issue is still there. Is anyone here facing this problem and is there any fix for this problem?
Note: I am using Lumia 640 xl dual sim official release build 10586.218 What if you change the scaling settings in display? It might make the experience better
Also, in edge, under settings you should have website preference (either mobile or desktop). Could you change that and test to see if it works better?

9 more replies
Answer Match 43.26%

They said that it was related to WebView issue, but was it really?

A:Why does swipe-to-go-to-the-comments-section work in the WC app in my Surface 3, but not in my W10M?

It works on my 950 XL.

1 more replies
Answer Match 42.84%

After updating my Lumia 830 with the W10M Anniversary Update (17.08.2016) my Settings stopped working. Seems like the app is not installed. When clicked it leads me to the the shop. Additionally MS Edge is crushing when started.
Any ideas what can be done?

A:Problems after W10M Anniversary update - Can not go into Settings and Edge missing

Originally Posted by Windows Central Question After updating my Lumia 830 with the W10M Anniversary Update (17.08.2016) my Settings stopped working. Seems like the app is not installed. When clicked it leads me to the the shop. Additionally MS Edge is crushing when started.
Any ideas what can be done? try a soft reset: Soft Reset is holding the Volume Down & Power buttons until the phone vibrates and reboots (about 10 seconds). This rebbots the phone with a cleared out RAM and Cache. No data is lost. It is good for when the phone freezes or you experience a glitch of some sort.
Then check for app updates in store
If you need additional help or have more questions or details to share, please join the site so you can reply in this thread. See this link for instructions on how to join Windows Central.

1 more replies
Answer Match 42.84%

The swipe to go frwd or back ( especially back) in edge browser for w10m is an annoying feature which I want to disable...is there a way?

More replies
Answer Match 42.84%

Phone specs: Lumia 830 running the latest W10m beta fast ring version. I used this feature to download uhm.... videos.... of uhm... you know.... things, and I was really pleased with it. Few days before installing the latest W10m update, the download feature suddenly stops working. Hoping that it will be fixed in the latest update so I didn't report it right away. But few days after installing the latest update the same issue is still going on, it just wont proceed to download a video. Yes I did all the basic diagnostics like soft reset and stuff. I also cleared up some space both in the C drive and storage. No I didn't changed anything in the settings before the issue occurred, it just happened. And no I haven't done a hard reset yet. Thanks,

More replies
Answer Match 42.42%

From past some days Outlook account in people app in continuous syncing. All the people photos are deleted & may be some contacts too. The bad thing is that all this is synced with my PC too & there also its the same problem of continues syncing. I lost so much data in this.
Logging into outlook through browser, I came to know that my outlook is upgraded.
Do anyone has any idea whats going on here? I am loosing my mind.

More replies
Answer Match 42.42%

Does anyone know if there is a app for windows 10 mobile similar to the Kodi app in the android store/ windows 10 direct download from website?

More replies
Answer Match 42.42%

Stumbled upon this trying to fix my static and it helped it out a bit, not 100% though but thought i would share it.

Anyways;

goto your playback devices > click your speaker properties > advanced > and change the default format to a higher setting, such as 24 bit, 48000hz (studio quality)

thats it, and of course you can play around; if you have an alright sound-system you can tweak your eq. settings and such to compensate for playback quality.

A:Sound Static Help (removes most static)

Thanks for the tip but did not help me.

1 more replies
Answer Match 42%

I have an issue when trying to restore backup after factory reset on my Lumia 950. I just receive error message which says can't connect to service. The error message is in Finnish so in English it might be somewhat different, but I think message is clear anyhow. Restore goes to about 20%, but after checking the safety code this error appears. I have tried WLAN both at work and at home and also mobile data. Any ideas how to solve this or is there just something broken at Microsoft?

A:W10M backup restore says can't connect service after safety code check on Lumia 950

Originally Posted by Windows Central Question I have an issue when trying to restore backup after factory reset on my Lumia 950. I just receive error message which says can't connect to service. The error message is in Finnish so in English it might be somewhat different, but I think message is clear anyhow. Restore goes to about 20%, but after checking the safety code this error appears. I have tried WLAN both at work and at home and also mobile data. Any ideas how to solve this or is there just something broken at Microsoft? it sounds like a local server side iussue.... wait one hour and retry

1 more replies
Answer Match 37.8%

Have the apps being developed for W10M improved in quality or features compared with the old 8.1 apps? Or have they become worse?
I remember reading that Uber in W10M is worse compared with WP8.1 but the instagram app in W10M is better
What are your thoughts? Please state which app or apps you're basing your conclusions on
Thank you

More replies
Answer Match 31.5%

Hi,

A few weeks ago I decided to upgrade to a Creative GF4 Ti4600 just for the hell of it. When I came to fit the card I found that it was getting incredibly crowded inside the case (video card touching HD's!) so I immediatly bought a bigger case too. I then stupidly assumed thats all would be dandy hahahah! First, I'm struggling to make the new card perform as well as, let alone better than, my old GF3 Ti200. Creative suggest loads of things to change in the BIOS but 90% of them aren't availble in my settings. Second, and more worrying I am getting a dreaded intermittant boot fault. It comes up as 'Boot Failure, press any key to continue'. The problem is that the primary HD is missing according to the BIOS so I do the obvious and checking the connections inside, put it back together and away to go. When I say 'away to go' I mean kind of. I use a USB keyboard, and when I boot after a fiddle inside it comes up with 'keyboard not present' which suggests to me that the BIOS has been reset somehow (disabling USB boot support). Upon getting XP back up I then plug in the keyboard and mouse (daisy chained) into one of the USB ports (I have 2 on the mobo and two on the front of the case), sometimes it comes up with 'USB device failure' so I change onto another port and they work fine????

All the fun of the fair.

MSI 745 Ultra (MS-6561)
Creative GF4Ti4600
Maxtor 16G 7200 (primary)
40G (secondary)
Soundblaster 5.1 Live
256MDDR... Read more

A:Static zap???

11 more replies
Answer Match 31.5%
Q: static

A comment about static electric generation . Static electricity is generated primarily by friction and some things do it better . silk is used along with rubber in the Degraf generators but any animal hair can do a good job , rubber soles on a woolen carpet, pulling a woolen sweater over a head of hair, woolen socks on a nylon carpet . these and things like that can pull up tens of thousands of volts allmost instantly. The humidity has a tremendous affect and on a dry day the effects can be spectacular. Be very carfull , ground yourself every time you touch inside the case, just a wiggle of the foot can buld up enough to turn the comp into trash.
 

A:static

I was always told to use a weak solution of fabric softener on the table i was going to use to do upgrades, to help combat static build up.
 

1 more replies
Answer Match 31.5%

When using my mic, there is so much static you can hardly hear my voice. I have checked all my connections, and they are fine. It was working properly, not sure what could have happened. Does anyone have any ideas on how I can fix this problem?
Thnks!
 

More replies
Answer Match 31.5%
Q: Static

Hi,

I'm installing a new hard disk drive into my PC. Is there a way to discharge static without having to buy a strap or other equipment and still safely install my drive? Can anyone explain how I do this?

Thanks for any replies!
 

A:Static

9 more replies
Answer Match 31.5%

Random question. Some one asked me today if there was a way that they could get a static IP address set up into their laptop that would be used no matter where they were. I responded that I did not think that was possible, since to my knowledge the ISP assigned the static IP and once he were traveling and not getting service from his ISP then the static IP would no longer be used.
Is that correct?
If so, then is there another method of connection in a similar fashion? Like a VPN set up or using a DNS service? I know very little about those VPN services except that they are good for hiding behind and securing data being sent/received. This person is trying to access secure databases for his work whike he travels, but these data bases I guess are requiring static IP addresses to be able to use them....So, I just figured i would see if anyone has any ideas for him. Is there anything that he can use that would make it appear as he were connection thru a static IP even when traveling?
 

A:Static IPs that you can use anywhere?? Possible?

No it is not possible to have a public IP to be able to roam across geographical/multi ISP services. Public IPs are registered and owned by various ISPs. When you are assigned a public IP, whether it be static or dynamic, it is specific to the ISP you have contracted service through.

As far as this person looking to access a database, many traveling/remote workers do this on a daily basis without the need for a static public IP. In my mind, the only appropriate way to do this is via a secure tunnel that is part of some sort of VPN type service. And when I say VPN service, this isn't in reference to those VPN services that are meant to mask your internet activites. When I say VPN service, this is something that is set up at the work permises/company that the company owns and operates. Plus I hope they are not exposing a database server directly to the internet.
 

3 more replies
Answer Match 31.5%

I have a static IP for connecting to work via a VPN.

I am looking for a way to use a different IP for private use.

Generally, is there a way to use an alternative IP without altering my service provider. eg an online source to borrow IPs? I have never heard on one.
 

A:Static IP

You will have to ask your ISP for another IP address.
 

2 more replies
Answer Match 31.5%

What is a static IP?
are there any benefits from it?

A:What is a static IP?

Static IP addresses are manually assigned to a computer by an administrator. The exact procedure varies according to platform. This contrasts with dynamic IP addresses, which are assigned either by the computer interface or host software itself, as in Zeroconf, or assigned by a server using Dynamic Host Configuration Protocol (DHCP). Even though IP addresses assigned using DHCP may stay the same for long periods of time, they can generally change. In some cases, a network administrator may implement dynamically assigned static IP addresses. In this case, a DHCP server is used, but it is specifically configured to always assign the same IP address to a particular computer. This allows static IP addresses to be configured centrally, without having to specifically configure each computer on the network in a manual procedure.
In the absence or failure of static or stateful (DHCP) address configurations, an operating system may assign an IP address to a network interface using state-less auto-configuration methods, such as Zeroconf.

5 more replies
Answer Match 31.5%

well what a frustrating day...but newayz im attempting to setup a static ip address. running xp...im using http://www.portforward.com/networking/static-xp.htm as my guide. i've followed the guide step by step and it is not working...i called my isp to get the correct dns's...any ideas on where to start looking as to what could be my issue?
 

A:static ip help.

Please supply the following info, exact models of the equipment please.

The name of your ISP and country of residence.
Make/model of the broadband modem. If dial-up, please specify.
Make/model of the router (if any).
Connection type, wired, wireless.
Make/model of network card or wireless adapter.
Make/model of your computer (motherboard if home-built).
Version and patch level of Windows, i.e. XP-Home SP2.
 

3 more replies
Answer Match 31.5%

I need a static ip for a lot of things. VPN, remote shutdown, etc. But how to I get or make one? (If it helps I have COX HIGH SPEED INTERNET.

A:How to get a static ip?

I think that you will need to contact your's internet operator.

6 more replies
Answer Match 31.5%

CAn anyone tell me a way to VPN with out a Static IP address???
 

A:VPN without a Static IP

You might look into services like NOIP , they allow you to have a URL that always points to your system by updating the IP on the DNS with a client utility on your machine. I haven't tried it with VPM, but it will resolve the IP for things like web servers...
 

3 more replies
Answer Match 31.5%

I am using a dos program and everyonce in a while the screen turns to all static. The program I am running allows you to plot out a dwg. About every 3rd time I plot I see the static. It has become really annoying. Can anyone tell me why it does this?

I have a Dell Dimension L933r running WindowsMe.

Please Help!
 

More replies
Answer Match 31.5%

does windows vista home basic work with static ip? - i have tried all i know to make it work but cannot - am i missing something or is it just not a doable thing?
 

A:static ip

Yes, it does work with static IP addresses.

Could you post a bit more about what you've tried, and what kind of network you're trying to connect to?

For example, are you connecting to a router inside your home or office, or to an ISP that has given you a static IP address? (The latter is relatively rare.)
 

2 more replies
Answer Match 31.5%

How do you make your computer have a static local IP? I have cable internet. I'm running Windows Vista.

Thanks.
 

A:Static IP

13 more replies
Answer Match 31.5%

Hi There,
Currently im using a Belkin router in PPOE but want to change it to a Static IP (for hosting). I can acess the router and click on static Ip however i need to enter a bunch of settings for it to work (wan Ip, Subnet Mask, Gateway Ip, VPI/VCI and Encapsulaion. I have tried ipconfig and can find some of the information but not all? PLZ HELP?
 

A:Static Ip

7 more replies
Answer Match 31.5%

I'm trying to figure out a way to be able to use remote desktop on a pc that I leave off when I'm not at home after I've gone somewhere. Would it be possible to use WOL(Wake on LAN) with the computer and wake it remotely if I use a static IP with the computer? I'm also looking for other suggestions if anyone has any ideas.
 

A:Static IP with WOL?

9 more replies
Answer Match 31.5%

hi, friends i had small dought about the home networking, i had two sys . i had net in one system and shared net on other system i confiugred in such a way that they are in lan with 192.168.0.1 -192.168.0.2. My question is , how i can get static ip for other computer(192.168.0.2) when i connect to net from main system. im using xp pro fin both systems. Tell your suggessions
 

A:static ip

Just configure it's IP address as 192.168.0.2, subnet mask 255.255.255.0, the Default Gateway and DNS server addresses as 192.168.0.1. That should get you connected.
 

1 more replies
Answer Match 31.5%

Hello -

I have two routers, one that is "piggybacking" on the other, a ethernet 10/100 ethernet switch, and a cable modem. A week ago I bought an additional 4 static IP's from Comcast for two of my laptops that were connected to the switch. Both laptops were receiving different IP addresses, which was exactly what I wanted. However, yesterday I did a reset (unplugged all routers) on all my routers and now every single PC connected to the routers and even the two laptops have the same IP addresses. Anyone know how to use the static IP addresses I had before on the two laptops?

I'm using whatismyipaddress.com to check the IP address. The IP addresses are different from before.

Any help would be great.

Thank you.
 

A:Static IP help...

7 more replies
Answer Match 31.5%

I have a mic going going through iMic into my MacBook. It's worked great these last few months, but now it sounds like this: http://makeoutmusic.knoxware.org/makeoutmusic/mic test.mp3

Any ideas? I can plug it into different USB ports, but after about three takes, it starts all over again
 

More replies
Answer Match 31.5%

Hi Guys

I'm changing over internet companies. I have been looking at the o2, a package called 'The Works'

O2 | Home Broadband | Which package is right for you?

As i do a fair bit of downloading, gaming and have 3 other computers connected to the web too, it makes sense to have unlimited usage.

I have been looking at the "All Rounder" too, but upload speed is slower (Will this effect gaming)?

My question is, what benefits dose a Static IP have? Am i right in understanding that every time you connect to the web, you get a different IP. Where as a static up will stay the same so no Wireless drop outs?

Thanks

A:Static Ip

With O2, I dont think you will get static IP. I like The Works plan though.

7 more replies
Answer Match 31.5%

I'm dual booting Vista Ultimate(32bit) and Windows 7(64bit) build 7100, I'm trying to figure out how to set a static ip address in Win 7.

In Ultimate i just right clicked on network connection>>>>properties..and set the static ip there. but when i right click on the Network in Win 7 nothing happens.

I need to set a static ip because i connect to a Beyonwiz PVR through a D-Link DWL-G810 (thats connected to the PVR), it works O.K. in Vista, but not in Win 7

EDIT: just looked at post below (Sleep problems) and it showed how to get to the IPv4, set a static ip but my PVR still doesn;t see Win 7.

cheers

A:Static ip

Right click Network icon in the task tray. If it is not displayed, right click on the triangle in the task tray and right network icon and select Network Sharing. Then right click on Local Area Connection. Select properties and IPV4 and properties. You will then have the familiar setup for static IP.

4 more replies
Answer Match 31.5%

Hello, I have been having problems with speed and dropped connections to clients servers via VPN. Finally I discovered that there is some kind of intrusion on the upload and the speed is dropped drastically. I installed Microsoft Network Monitor and it's
wonderful showing the traffic on the DNS server and all other connected clients. I see lots of activity monitoring network traffic coming from two static IPs that are assigned to us from Comcast. The first IP is their Gateway that is requesting for one of
our static IPs. Our static IP is not used anymore after I discovered that it was compromised and external IPs are hitting it from all over the world. I traced the IPs online. 
The question is the static IP is not used anymore and the network seems stable, however I see on the monitor the following relentlessly: The Gateway IP is always asking and requesting access to the Static IP.
5415 11:05:26 AM 3/23/2016
113.334893 ARP
ARP:Request, XX.XX.XX.XX0 asks for XX.XX.XX.XX6

Is this a malware or a bot that is sitting somewhere on the network trying to take over some open ports to broadcast something? We have Norton Symantec Endpoint on all the servers with Network monitoring and firewall
policies all in place. 
Do I have to worry about this or not? Any ideas how to track and deleted the bot that is causing this?
Thanks

More replies
Answer Match 31.5%

Okay. Went through all of the suggestions made by every helpful person who respnded. Nothing worked so I went and bought a soudn card. Bought a Diamond Extreme Sound 5.1 Installed it, after trying the AZALIA as "disabled" and "auto." Problem now is: there is sound but it is full of static. Not sure what to do from here as I have exhausted all that I know. Any further help woudl be GREATLY appreciated. And, thanks again to all who helped out in the beginning. You were all so great and quick to help out!

Thanks,
Tamalex
 

A:Static Now

Have you tried to move it to another PCI slot? Is the latest driver available from the manufacturer installed. If so, what else have you already tried?
 

1 more replies
Answer Match 31.5%

Hi guys!!

I'm wondering I have some doubts help me pls

What is benifit for static ip?

Can any one pls give me brief explanation?

I Heard that if we are using static ip,Any one can hack our Server,Is it right....
Thank for replay..
 

A:Static IP

11 more replies
Answer Match 31.5%

I have a 3COM Wireless 11g Router and I need to set up a static IP in order to Forward a Port. I am trying to follow the instrctions of www.portforward.com but I can't find my DNS server. I would appreciate someone holding my hand on this.

Thanks

A:How do I set up A Static IP

Hello JXBlack,

Open the run box type "cmd" without the quotes. At the prompt type " ipconfig /all" this should list your dns servers.

5 more replies
Answer Match 31.5%
Q: Static

hi! guys, just wondering how do you really discharge the static electricity coming from your body? What is the right method or proper way of doing it? And how do you know
that you have successfully drained the static electricity?

Any thoughts.?
 

A:Static

The most convenient way, when it comes to computers, is by touching a metal part on your computer case, while it is plugged in.

Anti-static wrist straps work in exactly the same way.

How would you know? I suppose if your chips aren't getting fried to extra crispy....
 

3 more replies
Answer Match 31.5%

I am trying to set up a static Ip for port forwarding but I'm not sure if I'm doing something wrong or not. I seem to have got it to work but the IP address I had to enter is not close to that of my router. The guide seems to say the ip address you choose should be very similar to the router's ip addres and I tried that but it didn't work. If I use an IP address that is anything other than 10.0.0.X with X being a variable I get an error saying "Warning: The default gateway is not on the Same network segment (subnet) that is defined by the IP address and subnet mask. Do you want to save the configurations"

Not sure what I'm doing wrong here or if using the 10.0.0.X Ip will even work for port forwarding?
 

A:Static Ip

8 more replies
Answer Match 31.5%

I'm setting up a home network with a Netgear RP614 router. I have a Dell laptop running XP PRO. I use the laptop at work, where the IT Dept. has assigned static ip's to all clients. My ip config is as follows:
IP address: 10 218 154 11
Subnet: 255 255 255 0
Default Gateway: 10 218 154 253

Primary DNS: 24 92 228 12
Secondary: 24 92 228 173

So in order to be able to use my laptop at home I envisioned setting up my router's DHCP to something like: 10 218 154 100 to 10 218 154 254

But then I'm not sure about the DNS. I would need the DNS to be the same as the default gateway? Right?
So is there a way around this? Or another way to do this perhaps?
Thanks in advance.
 

A:Static IP

6 more replies
Answer Match 31.5%
Q: static

i had logged on my computer and for some reason there is a screen on my desktop that i have no idea how to remove and i appreciate n e help i can get please!!! its a gray screen and it has the word static heres a screenshot

A:static

Very odd problem..

Could it be in any relation to whatever application is changing your theme for XP?

Try making a new user and see if the problem is there too.

9 more replies
Answer Match 31.5%

Hello,
I just wanted to ask.. is there a way to get static IP..So that i dont have to call my broadband provider. I have dynamic ip and it always changes... it really annoys me.

Thanks in advance!!

A:Static IP

Hello GeorGeZ,
It looks like you will have to get in touch with your ISP, lifted this from another site, hope it helps.
Good luck.


"There are times, however, when users who connect to the Internet using dynamic IP wish to allow other computers to locate them. Perhaps they want to use CU-SeeMe or use a VoIP application to make long distance phone calls using their IP connection. In that case, they would need a static IP address. The user has two choices; they can contact their ISP and request a static IP address, or they can use a dynamic DNS service. Either choice will probably involve an additional monthly fee."

15 more replies
Answer Match 31.5%

Hiya, my PC is being very unhelpful and won't let me assign a static IP address. It's XP. We've got broadband through a Cisco Systems Linksys Router (BEFSR47) and it's not happy if I make my PC IP static, then web pages won't open. The same happens if I make it static at the router's end, or if they both say static. It looks like the connection is still there, but pages won't open.

I'm trying to forward ports, if it won't work is there any way to do that without a static IP? Also I don't want to have to mess with the other computers on the router if possible, just my one.

2am is really too late to still be playing about with this, my head hurts.

Thanks for any suggestions.
 

A:Static IP

7 more replies
Answer Match 31.5%

I think my router assigned a static IP address

first i unpluged the router and then reconnected
had same ip

then

Start>Run>cmd.exe

ipconfig/flushdns

ipconfig/release

ipconfig/renew

and i still had same ip address

i have an insight broadband internet connection ( http://www.insightbb.com/ )

how can i change my ip?


Thanks and god bless!
 

A:Static Ip?

Hello!

No, your router does not have a STATIC IP. If you have a regular Insight package your router’s IP is DYNAMIC.

Which IP are you wanting to change? Your compute’s IP address or your router’s IP address?

If you run START>CMD>IPCONFIG your IP address should be 192.186.xxx.xxx which is assigned from your router to your PC. Your router’s IP will be something totally different and you cannot see that IP by running IPCONFIG on your computer.

To find your router’s IP address you can either connect to your router, sign in under admin and look at the status page on it or….

You can go to:

www.myipaddress.com

and this will show you your router’s IP address.

Are you really using a router or are you directly connected to a cable modem?

It really doesn’t matter. Since Insight assigns dynamic IPs you really don’t have any control over your IP address. You can keep unplugging your cable mode and router or using your router’s status page to renew your IP. You may or may not get a new address. It is highly unlikely that you will get a new address with Insight since they have long leases set.

I hope this helps!
 

1 more replies
Answer Match 31.5%

Just loaded up Windows XP Pro and am logged on as Administrator.

How do I set up a static IP for Windows XP; I've searched everywhere I can think of and it looks like Microsoft doesn't want anyone to find it.
 

A:How to do Static IP in XP?

8 more replies
Answer Match 31.5%

Help

I am unable to get a ping response from a static IP address behind an Actiontec 1520 DSL router when I am on the internet side - I can ping any address on the internet from within the LAN network. This ping goes through the appliance with the static address.

Thanks in Advance
Matt Kay
 

A:Static IP - DSL

I may be confused about your question, but your router is acting as a firewall and is probably blocking the ping responce althought you are able to send a ping out. Is that what you were trying to resolve?
 

1 more replies
Answer Match 31.5%

Hello guys,

Here in the office my computer is connected to the internet
using a static ip. Is there anyway I can use the Ip so that my computer
at home can able to browse the internet? I have phone line at home.. i hope there is a way.

Thanks in advance
 

A:Static IP

As far as I understand an IP address is the address of a server. Unless you connect to your company's server via direct modem connection or find someway to get onto your company's network from home.

When you dial in from home your isp will allocate you a temporary ip address.
 

11 more replies
Answer Match 31.5%

Hello everyone I too was having the same issue with static on all audio on video/youtube/streaming movies I fixed mine and no longer have the issue DELL Tech support is USLESS! and its sad the people that are designed to know the pc in and out couldn't be further from the truth! So take the steps below and it should correct the issue!
1. Right click on your speaker icon on on the lower right handside of your tool bar at the bottom, select SOUND.
2. You should now be in the 1st tab called PLAYBACK, which will list your all your audio sources. Locate the one that says SPEAKERS/HEADPHONES right click on that one and look for PROPORTIES.
3. Click the ADVANCE TAB and select RESET TO DEFAULT, the click on the ENHANCMENTS tab make sure the SETTINGS is selected to NONE and make sure all the boxes are UNCHECKED you may need to select apply you may need to restart your computer and BOOM no more static! hope this helps guys :)

More replies
Answer Match 31.5%

Okay when i go to setup a static ip for my router to port forward i get a slight problem. my router wants my static ip to be something like this 192.168.1.231 to be able to port forward it needs that 1 but my static ip is 192.168.137.119 and i dont understand why? can someone please help me?

see attached picture
 

A:Static IP

First off, call up your ISP and tell comcast to go **** themselves and tell your mom I said "Hi sexy!" and then go to the store and get me more chips. Maybe that'll fix it.
 

4 more replies
Answer Match 31.5%

I set up my home network (of 6 computers) on a static IP system on the linksys setup page (192.168.1.1 in browser) and after i saved it the internet did not work on this computer, i changed it back to assign automatically and it works fine. i want to know if theres a different way to do it... i tried it before like it tells you on port forward.com and the same thing happened.. is there something i am doing wrong?
 

A:static ips? need help..

7 more replies
Answer Match 31.5%
Q: Static

When putting your computer together what kind of anti-static precatiouns do you take, if any, and have you ever had an anti-static problem?
 

A:Static

6 more replies
Answer Match 31.5%

I have a logitech Squeezebox radio, which I can listen to Internet radio, or music files from my pc. The problem is, connection to the computer is sometimes lost, and won't connect. I read on a forum that this could be because there are other devices using the network, and that the best way to stop this is create a static ip address on the pc acting as a server for the radio. I think I know what to do, but there are a couple of things I'm not sure of. When I type ipconfig /all, at the cmd prompt, one of the things I see is IPv4 Address. Is this the one I want? When I go into the network properties, there is TC/IPv6 and TC/IPv4. Which one do I use? or do I use both? Any advice on setting up a static ip, would be great. I'm running Windows Vista, and connect to the router via a Ethernet Adaptor.
 

A:Static IP

Double-click on TCP/IP v4 in the network properties
TCP/IP properties will open up, check use the following IP address:
Enter the IP address, subnet mask, default gateway and in the DNS settings below, enter both preferred and alternate DNS server IP
This information could be obtained from your ISP.
 

3 more replies
Answer Match 31.5%

I'm having this discussion with my friend right now about old static IP's. He says old static ip addresses that you do not have in use anymore when, say, you switch to dynamic, cannot be traced to locations with IP locator sites. I think they can. What is true?

Obviously the ISP can.
 

A:Old static IP's

IP address will be provided by the ISP either fixed or dynamic
and that IP address will be in the database for that ISP
so in theory no difference between them giving a fixed IP or a dynamic IP

and depending on the ISP - you may have a dynamic IP address and it not change - as modems are often always connected and if disconnected may not change the IP address for a certain time limit anyway

or have i misunderstood the question
 

1 more replies
Answer Match 31.08%

Okay so I just started using opendns, well becouse they have a realy big rang of dns entries.
I decided to set up my modem which is a westell 327w. This router has a built in wifi ap, I have had this router ever since 2002 with verizon(its the one they gave me for free.)

For me to select my own cutom DNS servers the router needs to disable dhcp.

Before it looked like this:


Now it looks like this:



My question will I get charged from my dsl provider( Verizon) for not using DHCP?

A:Static Ip or Dynamic?

You are confusing between an EXTERNAL (PUBLIC) static IP and an internal (private) IP. When you disable DHCP, you assign INTERNAL static IPs to the various computers on your INTERNAL network. When DHCP is enabled, this job is done by the router dynamically. Neither of these options affects your public ip address.

In short, your GATEWAY (router) has your Public IP address, and the computers in your networkhave private IP Addresses. So, there is an outside and an inside. Anyone "out there" can see your public IP, but only machines inside your own network know each other's individual private IP addresses (dynamic or static).

Your ISP will charge you if you request a PUBLIC static IP. E.g., if you want to host a website or a server from your home. With a static public IP, anybody can type that into the address bar and be directed to your website. E.g. typing http://74.125.45.100/ into your browser will take you staright to Google because that is Google's public IP.

8 more replies
Answer Match 31.08%

I am using a wireless modem/router...it's a NetGear MBR1210 from Bell Canada.  I do some online gaming.  The server we are using for this gaming is using a protocol that required me to have ports opened.  My IP would not unblock on their end.   So I got a Private Static IP and all is well.  The problem is in 10 days I have used 15GB of data.   Since I have been playing the same game all along I have never used that much bandwidth. 
 
So my question is this.   Is there any way a virus or hacker can be using my IP address and running up my bill?  I don't see any traffic on my end while connected to the net.  So anything going on would be external. 
 
So what do you think?
 
Thanks
 
Menessis

More replies
Answer Match 31.08%

I am experiencing crackling and static when the volume is up on my laptop. It doesn't matter what I am doing, it is even doing iti while it sits idle. I have tried a few fixes, I can't figure it out. HELP before I throw this thing!!!

More replies
Answer Match 31.08%

Ok, this is a really surreal problem. I am running cable internet through a Motorola SB5120 modem, a linksys befsr41 router, and a windows xp sp2 box. Whenever I try to set an ip instead of using dhcp I cannot reach certain websites. The 2 I seem to have the most trouble with are yahoo mail and download.com. Here is a screenie of what yahoo mail looks like completely loaded:

http://www.pitt.edu/~ashr/yahoo.bmp

As you can see it is not loading fully and it takes about 5 minutes to even get to this point. Download.com takes longer but same results. I am using firefox, but it is the same in Opera and IE. I can fix this problem by running the winsock fix found here:

http://www.majorgeeks.com/download.php?det=4372

and then going back to obtaining an ip automatically. I have reinstalled windows, and this is a different network card and motherboard. I need to be able to have a static ip because I run an ftp server and need to forward that port to my computer. I am very careful about the processes that run on my computer and I run hijack this! and spybot regularly. There does not seem to be anything wrong. any help would be greatly appreciated.
 

A:static ip problem

11 more replies
Answer Match 31.08%

i have a laptop running Vista 32 bit Home and as of tonight i've been getting graphics glitches that look like tv static when i try to play a game. my webpages also get choppy looking when i scroll. so far anti-virus has picked up nothing and my graphic drivers are current. any suggestions?
 

A:graphics look like tv static

6 more replies
Answer Match 31.08%

Hey guys, I want to set up a static IP address for my bittorrent client, but whenever I put in the information for my Static IP I lose connection to the internet. If I change the settings to anything from "automatically acquire IP address" or whatever that bubble says, I get disconnected. I could do this in my sleep on XP, any ideas why it won't work on 7?

A:Static IP Address

well if you try to use satic IP, you must make sure to provide valid subnet mask/gateway/DNS for the connection to work properly. if you are not sure what settings to use, then while you are connected to the internet, open a command prompt and type in "ipconfig /all" note down subnet mask, gateway, and DNS Server ( usually two DNS Servers ), put that in your TCP/IP Settings and it should work.

on the other hand, if you have a router and wish to use a static IP, you can tell your router to assign the same IP address each time to your machine. it is called STATIC DHCP, and it is assigned from the router configuration. but you need to know the MAC Address of your network adapter. to get the MAC Address, also open a command prompt and type "ipconfig /all" and look for physicall address, that is also another name for the MAC Address. then open your router configuration window from your browser, type in 192.168.1.1 which is usually the router's IP ( sometimes 192.168.0.1 or something else ) and type in user/password, that should be admin/admin by default and then goto Static DHCP settings, enter the IP address and MAC address combination you want to set, then you propably have to disable and re-enable your adaptor so that it will pick-up the new IP Address you assinged it. hope this helps!

1 more replies
Answer Match 31.08%

A window from this site keeps popping up and I can't close it. I have to restart my PC to clear it out, but it always comes back. Other info, part of message reads prod-pri-cs0.cloudapp.net. The screen that comes up asks for my user name and password. Also this message appears: Warning your user name and password will be sent using basic authentication on a connection that isn't secure. Can anyone help me stop this window from popping up.
 

More replies
Answer Match 31.08%

I have a Dell 6301 desktop with Vista 32bit and 2 Nvidia 9800GT video cards and SB X-Fi Titanium sound card. After 6 or 7 hours of game playing I start to get static and garbeled sound. If I reboot everything is OK for another 6 or 7 hours then the same thing. Any advice on how to correct this? Is this something I have to put up with. Thanks for any advice.
 

A:Gaming Causes Static

IIRC, the X-Fi's had some initial issues with the static issue you are talking about. Do you have the most current drivers for your sound card from the Creative website?
 

2 more replies
Answer Match 31.08%

I have been receiving static from the speakers of my computer and it's annoying as it blocks out some of the sound of videos and games.
I only recently started getting static but now it won't stop. I haven't looked much into this yet but I figured I'd post a topic here.
If you need computer specs, I can post that later, as I'm using my iPhone currently to post right now. Thanks.

P.S. there is still static even when I plugin headphones
 

A:Static from speaker

Do you have your cell phone close to the speakers? When you say the earphones have the same static, do they plug into a port on the speakers, or do you unplug the speakers to plug in the headphones?
 

3 more replies