Tech Problem Aggregator

Update to Windows10 ver 1607 is not completed

Q: Update to Windows10 ver 1607 is not completed

When updating to Windows 10 Anniversery Update (1607) everything goes fine till the first restart of the computer.Nothing happens even if you wait for about 8 hours. The screen is blank and the keyboard does not respond. After having turned of the computer and started it again you get the information: "Restore the earlier version of Windows..." (Windows10 for home use).

More replies
Answer Match 90%

Just wanted to add my story, similar to above.  Product# F3F15UA#ABA, 10" Pavilion notebook.  Win 10 Anniversary Edition update will not install. Machine gets to 32% and then locks up completely; grey blank screen. Have to unplug and remove battery to shut down.   After powering back, automaticaly recovered to previous version of Win 10 (1511).  Machine now almost unusable since it spends all day re-downloading the update files and then doing an automatic update reboot every evening. This has happened 4 times already; now keeping it in airplane mode.  Was on MS Assure service for hours.  2nd  tier guy said to just wait for MS to come out with a revised version of the update. Tried installing MS registry update fix (MSI) issued 10/5, but did not fix the problem. I have a completely clean machine, all drivers up-to-date, nothing installed except Office 365 and 7-Zip.  Installed Win 10 1511 as a complete replacement (OS and all apps) a few months ago and performance improved tremendously.  Except for this update problem, after the OS replacement PC works very well (for a slow, under-memory PC).  I mainly use it to take to meetings to give PowerPoint presentations, for which it works just fine.  I never do email with it or download apps. Above reply suggests updating from a USB after a image backup.  Can try that to see if I get a better result, but wonder if it would be better to skip "update" and, i... Read more

More replies
Answer Match 70.14%

In August I upgraded my Windows 7 Home Premium laptop to Windows 10.  All has worked well for a month now until the Windows 10 version 1607 was highly recommended by Windows10 people. Having kept current with all of the updates faithfully but as soon as I tried (four times) to install Windows 10 version 1607 and then the time-consuming step again of reverting back to the previous Windows version.  So I have hit a brick wall.  I always get the error message: "Low Disk Space".  And Windows continually is reminding me to upgrade to 1607. Like the famous movie, this is a CATCH-22 situation. I read some of the Forum's help and was lead to a link suggested by a HP staffer as the only resolution available.  The link for this Low Disk Space Error problem is http://support.hp.com/us-en/document/c03736755. I translated the link's Windows 7 instructions into Windows10 style organization of problem resolutions and located the "Files and Folders" section and then followed the Windows 7 steps.  But I still hit a brick wall.  In viewing the hidden files on my Recovery Drive (Drive D I verified that I did not have any personal backup files to occupy space needlessly.  I also cleared out previous System Restores and just did a new System Restore.  But still have the same problem.  It appears I need to expand my Recovery Drive to accomodate Windows 10 version 1607.  But in doing the steps under changing my partitions th... Read more

A:Low Disk Space after Windows10 version 1607 upgrade

Clean EnergyGuru Hello;Allow me to welcome you to the HP forums!First off, once you did the Upgrade to Win10, that corrupted the HP Recovery information, rendering any HP recovery unlikely.  So, at this point, the Recovery partition serves no useful purpose. If you want to remove it and recover the space, then use this link to download the Minitool Partition Wizard boot ISO file:  Best Free Partition Manager for Windows | MiniTool Partition Free Once you have this, you have a choice of media to create:1) If you can boot from CD, download and install ImgBurn and use the Write Image to Disk option to create a bootable CD.2) If you can boot from USB, download and install RUFUS and use the option to create a bootable USB stick from the ISO file. Boot your PC with the media you created. You should now be able to do partition changes without problems. Second, may be folders on your C: drive named $Windows.~BT and $Windows.~WS. These are used by the Upgrade tool to store files needed for the Upgrade. If these are hidden, will have to change your settings in File Explorer to see them, but once you find them, then remove the folders.Also, you need to remove the Windows.old folder.  Here are the instructions:  http://www.howtogeek.com/223821/what-is-the-windows.old-folder-and-how-do-you-delete-it/Once these are gone, you have a lot more free space in the C: drive.Good Luck

2 more replies
Answer Match 57.96%

Hello all.
Running windows 10 pro 64 bit.
I've updated from Version 1511 to the anniversary update, 1607.
Or at least, I thought I did.
The update went well, no hiccups, no errors. Used windows update, let it downloaded and install and rebooted. Alas, system still shows OS Version 1511.
Used update again, same thing, rebooted, 1511.
Went to the windows site, downloaded the windows10upgrade9252.exe, ran it, same exact issue, rebooted, still showing version 1511.
Error logs show no issues. Disabled all external drives, turned off anti-virus, etc, repeated, rinsed, rebooted, still version 1511.
Only think I've not done is burned an ISO to DVD and updated from that.
Any clues as to what's going on?
Thanks!
Nelson Davis

A:windows 10 update from version 1511 to 1607 anniversary update - does not update

Can you check to see what OS version you have? Check in settings > system > OS build. It should show something like 14393.5 or 14393.10

5 more replies
Answer Match 56.28%

How fix "the installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation ( error code 0x900101-0x2000C )

A:update to windows10

Was bit locker enable on the old OS? Also see this https://www.itechtics.com/fix-error-0xc1900101-0x2000c-on-windows-88-110-update/

3 more replies
Answer Match 56.28%

Yesterday windows10 was installed in my win8.1 laptop thru the MS updates. All went fine and is working well but I dislike very much the start menu and so I installed the Classic Shell alternative.

However I can't find the executable for the new MS updates which I like to make a shortcut in my new menu

Any idea where the new updates program is located?
 

A:Where is Windows10 Update Exe

14 more replies
Answer Match 55.44%

how do i update from windows7 to windows10 please help me out.

A:how do i update from windows7 to windows10

https://www.microsoft.com/en-us/software-download/windows10 simply follow instructions

2 more replies
Answer Match 55.44%

how do i update from windows7 to windows10 please help me out.

A:how do i update from windows7 to windows10

https://www.microsoft.com/en-us/software-download/windows10 simply follow instructions

2 more replies
Answer Match 55.44%

I'll give some background.

I have a tri-boot setup. Windows 8 one ssd, windows 7 pro on a second ssd and ubuntu 13.04 on a partition on a 2 gig raid 1. The boot partition is on the windows 7 ssd. All drives are on the same Intel controller. Prior to the 8.1 attempt it worked. I'd boot the w7 ssd and a black win7 style boot screen would appear with the 3 OS choices. I'd been using win 8 as primary since it's release with no real issues.

I updated through the store early today and the process had a hitch after the first reboot but I rebooted and it completed the install. Windows 8.1 started and walked me though an initial setup. Once in, all looked pretty much unchanged. The only issued was it asked me to reinstall some XLan software.

I rebooted to check my other OS's and the problems began. I boot up, it loaded the blue win8 boot screen with all 3 OS present when I attempted to boot ubuntu it went to a black screen with no possible input. Hard rebooting brought up the grub bootloader (not win8 bootscreen) and I was able to enter ubuntu. Same thing happened with win 7 pro. I soft rebooted and the win 8 bootscreen appeared. Choosing win 7 took me to a hung black screen - hard reboot directly started up win 7. Restarting to win 8 bootscreen again and choosing win8.1 took me to another black screen - Hard reboot from there started up a win 8 repair process.

This is always the case with each of the 3 OS's. I have found that I can get into win8 if I enter through safe mode ... Read more

A:8.1 update completed but problematic

I have the exact same problem. I even had the XLan error you described. Once I restarted the computer, it always go to a black screen. I do not have multiple OS's to boot into, but the black screen always comes up after the little blue windows 8 loading screen.

If you get your issue solved, please report back.

Update:

When I tried your suggestion of enabling Debugging, it loaded up. However, 1-2 minutes later it would freeze and I would have to push the reset button on the machine. In Safe Mode, I didn't have any of the freezing, but when I tried to uninstall Norton Internet Security, it would freeze. After a restart, I downloaded the Norton Removal Tool, and removed Norton. At this point, starting Windows 8.1 with Debugging allows me to stay freeze-free. However, trying to start up without Debugging gives me the same black screen.

Another thing to note is that when I have all non-Microsoft services stopped, I still get the black screen upon bootup. I'm not quite sure what Debugging mode does in terms of bootup, but its definitely a workaround for now. I used msconfig.exe to keep debugging turned on for now.

Again, if someone figures out the fix, report back.

2 more replies
Answer Match 55.44%

After the automatic update this morning my desktop shows normal - BUT NO MOUSE. A warning pops out in the lower right corner that says something about the update did not complete - Click for details, But I can't click on anything!!!
 

A:W10 Update not completed - No Mouse

Can you use the cursor arrows to navigate there?
 

2 more replies
Answer Match 55.02%

I have a zbook 16 g3, with windows7 as OS, so when I try to update to windows10 a message appears that says to remove HP Drive Encryption, can I uninstall that software? Or is this an indispensable?Sorry for my bad englis and thank you

A:problem with windows7 to windows10 update

@Matte_c? Not at all sure about a ZBook 16 -- the following update to the Client Security Manager software indicates that this new version of the program can withstand the migration process to Windows 10. Driver Business Notebooks as listed: sp74933.cvaSupersedes: sp74101.cva   (Information and Notebook list)Enhancements: This version of HP Client Security Manager is no longer blocked by the Windows 10 upgrade (migration) process. After this package is installed, the system can be upgraded / migrated to Windows 10 without uninstalling HP Client Security Manager before running the Windows 10 upgrade.sp74933 Client Security Mgr V8.3.18.2044A W7-10 32/64bit When you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Click my Answer Accept as Solution to help others find Answers.

1 more replies
Answer Match 54.18%

Configuring update for Windows 10
100% complete
Do not turn off your computer
Now been on over an hour
(Using tablet to ask !!)
What can I do ??

A:pc computer is stuck loading windows10 update

Wait a little longer come back at 1200 and let us know if its OK or still stuck.
Patience is a virtue as switching off may cause even worse problems.
:0)

1 more replies
Answer Match 54.18%

When one starts a program which requires admin rights by clicking its icon in one screen,
the Windows 10 acticates it in another screen - which is ok - but the windows activated is empty (blank) which is not ok!

Howerver, if that window is moved to another screen
it is not empy anymore and you can use it normally!

It looks like each Windows 10 update has more problems managing more than one monitor!

More replies
Answer Match 54.18%

When one starts a program which requires admin rights by clicking its icon in one screen,
the Windows 10 acticates it in another screen - which is ok - but the windows activated is empty (blank) which is not ok!

Howerver, if that window is moved to another screen
it is not empy anymore and you can use it normally!

It looks like each Windows 10 update has more problems managing more than one monitor!

More replies
Answer Match 54.18%

I got the message to update my BIOS. It was dated in May 2016. The latest on the website was August (8/11/2016). I updated it and the computer shows the new version but still says it needs to be updated and tried everytime on a reboot. 

More replies
Answer Match 53.76%
Answer Match 53.34%

I tried to update to 1.7 and it failed.  We had to run a mongo change regarding the certificate.  When that was completed the install was fine, but we started getting an invalid cert on the web interface.  I finally dug into it and saw that
the ata gateways were no longer talking as well.  
I updated the cert so i have that cleared up but the gateways wont connect.  I updated them manually by downloading the installer and the install went fine but they still wont connect.  I decided to look at the cert thumbprint of the package /
json file and it is below.  

What would i need to get these to connect again?  



More replies
Answer Match 53.34%

After updated my surface book to windows 10 redstone, I found my cpu frequence is always on max with no high cpu usage program run backgound.And under battery mode, cpu frequence stay on 2.47gzh(i5-6300u) and can not turbo to 2.9ghz, is anyone has the same issue?
Sorry for my poor English.

More replies
Answer Match 53.34%

Start > Power > Shutdown did not anymore shutdown the PC
I had to do reset and restart Window 10 again

What can be done ?

command mode shutdown ?

A:Shutdown stopped working after the latest Windows10 automatic update

The way I do it is
Right click start
Then click Shut down or sign out
Click the >mark then click Shutdown

0 more replies
Answer Match 52.5%

I am creating an Ionic with Angular based hybrid app for Android, iOS & Windows.The app has a functionality select dropdown which was working fine in all three platforms. Once my Windows10 device(950XL) updated to latest version -10.0.14393.189, its crashing the app on tapping on the select box. When I had the old version-10.0.14393.67, the app was working fine. I tested few cordova apps in the same device has the same issue on tapping on dropdown. Kindly help me out to sort this issue

More replies
Answer Match 52.5%

Today arrived an update for windows 10, 1607 and its already downloaded.
Should I install it? cause I read for a long time about bugs and black screens.
Think they fix all the messed up bugs?

More replies
Answer Match 51.66%

So i just updatet my computer to the new update 1607 It was smooth update no problems, until I logged in waited a few seconds. Then clicked on google chrome. And right there it started freezing on me. Never happens before, I restart and waited few minutes logged in and BAM the little circle next to the mice icon started going anddddddddd the pic froze again. Literally restated my pc 10 times now and it keeps freezing I tried to go back to the old update but it won't even let me do that because it freezes again. So pls for everyone saying you want the new update don't do it unless I have the worst luck in the work. It won't even allow me to use the start button because the circle on the mice start and if I click anything it freezes. The amount of rage in my body is high as a mofo.

A:The stupid update 1607

Hi, for the last couple of months issues with the anniversary upgrade have been published widely. It's always wise to wait for upgrades, and check on the news.
Try searching for
anniversary upgrade problems
for example.

Since it came out there have been several updates, one of those was supposed to address freezing issues.Microsoft Fixes the Windows 10 Freezing Issues - Windows 10 Forums

Now whether what you are experiencing is addressed by that I can't say.

You have at least the following options:
a. Go forwards: Use Windows update and see if you can get that update. (I think there were a couple before it). See if that fixes things.
b. Go backwards: Roll back to the previous build - available for 10 days.
You can attempt this via Settings; also via SHIFT + left click restart; also by booting from a Win 10 bootable medium

So if one doesn't work for you, try another method.

2 more replies
Answer Match 51.66%

Help i am in reboot ****.  i have searched through some of the previous post about this iss , but have not found a solution that works. I was stressed out enough that i let a MS tech support dig around in my PC to resolve this remotely. He/She said that it was fixed , but the issue is still happening. Will not be doing that again. i have tried half a dozen suggestions. If anything it has gotten worse. My PC has been put into reboot **** . I have tried to install over a dozen times in the last week. At one or two points it did get to 100% , but i am asked to restart my pc to finish. However  it says the update failed to install. I have also had some lock ups on screen that says the USB was not removed properly , built i had not USB in the front. Unless it something in the back of the machine. And another saying that i need to fix my windows account so that apps can connect to this machine( or something like that) I have no other devices, just my computer which i now want to shoot and put out of its misery. I don't know if these errors are connected , but thought i would mention them. The cumulitive update is the first issue oi want to solve. IT has been happening for over a week now.I have tried Microsoft tech department and they were useless. Even the suppoprt forum has yielded no results. BIG PROBLEM.Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3194798).Instillation Failed (X)15 restarts. You read that right. I have installed and rebo... Read more

More replies
Answer Match 51.66%

I have a friend in Pougkeepsie, NY who has not gotten the update yet. His system is still at 1511 and he has a digital entitlement license. Over the phone I showed him how to run update through settings and it reports that system is up to date. How in the world do I tell him how to update to 1607 if system says up to date? He is not proficient enough to download and use iso file.

Henry

A:Update to windows 1607

Sometimes updates through Windows Update take time to arrive on some systems and says it's up to date, here, my netbook did receive a day sooner than my desktop, maybe waiting a day or so and retry

1 more replies
Answer Match 51.66%

I have had it with windows 10. I run a home business and my first encounter was that I told the update tool not to install windows 10. Then one morning I went to get ready and when I got back it had installed without my permission. I decided to try it an it has run perfectly through many small and major updates until 1607.

I hangs on the second reboot. Again I did not ask for this update and I have wasted several hours screwing around waiting for a spinning circle for over two hours before deciding it was not going to install. It finally returned me back to my previous Windows 10 version.

I wrote the error code and called Microsoft who said my machine was not Wiindows 10 compat. and their official response on that error was to take no action and if I had purchased Windows 10 my money would be refunded.

How can my system work for months and now be nt Windows compat? Do they not know people use their computers to run business and to force an update to to a non compat system costs people money in lost productivity? Or do they not care which is more like it.

I know on this forum the WIndows Butt-Boys will tell me all the reasons this is a good thing. So take your best shot. But who is going to compensate me and others for lost time and the resulting loss of income?

Fortunately I had an image of my Win 7 load and more time wasted in having to put this back on.

Thanks Microsoft for more great software and customer support.

And before you ask I have no Malware, uninst... Read more

More replies
Answer Match 51.66%

The update downloads fine but when I try to install it it reaches 32% and then my computer freezes. I have to turn it off and on again, and then it restores my previous Windows version. Windows Update says it is error 0x8007139f.

More replies
Answer Match 51.66%

 I tried to update to the edition 1607 of Windows 10 in this notebook that already had win 10 ver 1511 running properly. After downloading the update and start installation, everything went ok until restart time. In the middle of rebooting, computer stoped showing blue screen with error THREAD_STUCK_IN_DEVICE_DRIVER. System unistalled  ver 1607 "returning to previous 1511 version". I tried other two times to update, with the same blue screen. I started to look in the forums for help and update all the drivers, AMD radeon, PCI, etc.  By now I am almost certain that the problem is still the display adapter AMD Radeon. I have read and followed all instructions in this forum to update the driver, I even went to amd web page and used the auto detect & update drivers there with no success. Still every time that I try to update the blue screen appears again unistalling win updates returning me to the previous version. Can you help me with this? Thanks a lot!MARCO

More replies
Answer Match 51.24%

Hi there

After latest update (using current build 1607) - totally lost LAN capability on Network -- laptop connects via Wifi but not LAN !!!! --LAN adapter - Bog standard INTEL so shouldn't be any problems with it. I have to have LAN at this work gig for security-- I can use private wifi for public access but I have to have LAN for Company network on this gig.

Undid latest updates -- now works perfectly.

C'mon Ms - we all know Networking has always been a weak link in Windows -- just LOCK some of your brightest developers into their offices until they get it TESTED and FIXED - and only feed them on Bread and Water until they do !!!!!!!

I HATE playing this "Will it work or won't it" after an update -- it's OK if you are in a development lab where you can test and play with machines at will but if you've got things to do and the computer updates unpredictably and then doesn't work properly --that's NOT acceptable.

Fortunately (I might be bonkers in some peoples eyes) but I always backup the laptop daily !!! Glad I did this time otherwise no access to company LAN !!! and that would have been a problem waiting for a day or two for them to sort out an old clunky work laptop running at the speed of molassess !!!.

Cheers
jimbo

More replies
Answer Match 51.24%

This one has to be the worst of them all. It has taken us back to '90s era when we had to do such stupid things such as take out USBs while installation, install drivers and do backups and all that stuff.

Few days back i decided to install the Annversary Update ie. 1607 update as people said it had many new and improved features. But unfortunately it turned out to be my worst ever Windows experience EVER. Even worse than the Windows 98!

Following unsolved issues which i have been facing so far:-

1) Initially it refused to update and i had to download the HUGE update again and again and again. Subsequently i realised that like old old days i had to remove the wireless receiver of my mouse/keyboard to complete the installation.

2) Even though the installation is complete, 6 out of 10 times windows gets stuck on the black screen and process ONLY if i remove the wireless usb receiver.

3) Cold boot and resuming from hibernation now takes AGES! Prior to the 'much awaited' update a cold boot took around 50 seconds and resuming from hibernation tool hardly 15-20 seconds. Now cold boot takes around 2-3 minutes and resuming from hibernation takes around 1.5-2 minutes. It always gets stuck on the login screen and processes the entered password as if it is negotiating from servers situated on Pluto!

4) My reliable tp link wireless adpater automatically gets unplugged every 2-3 hours or so. I have to unplug replug to make it work everytime.

5) *reserved for more stupid performance ... Read more

A:Win 10 Anniversary Update 1607 - The Worst Ever?

Have you checked in Device Manager to see if you have any driver problems. It could be that some of your problems may be fixed by updating drivers. If that doesn't work you can try a repair install to see if it will fix your problems. Repair Install Windows 10 with an In-place Upgrade - Windows 10 Forums

more replies
Answer Match 51.24%

After getting my new laptop a couple months ago, I decided not to do do Windows Updates for fear of encountering the problems of the Anniversary Update that were reported. Now I heard that a fix was finally included and decided to go ahead and allow my computer to update. It downloaded 8 different items successfully, but only 7 of them installed. The one that failed was called something like "1607 Feature Update". I believe 1607 is a number associated with the Anniversary update, although I could be mistaken. But after rebooting my computer after the other updates installed, I don't notice anything different, so it looks like I don't have any new features.

Is the 1607 Feature Update the Anniversary update that was supposed to give us new features? Will my computer still be secure without it? It's mainly the updated security that caused me to do Windows Updates at all.

A:1607 Feature Update failed

Originally Posted by Delly10


Is the 1607 Feature Update the Anniversary update that was supposed to give us new features?



Yes. It's a big download (3 to 4 GB) and will do a full install taking an hour or so, rather than the quicker patching that Cumulative Updates do.






Will my computer still be secure without it? It's mainly the updated security that caused me to do Windows Updates at all.



Absolutely. All security fixes are released in the Cumulative Updates, there's one for each of the versions: the Anniversary Update (1607), the Fall Update (1511) and even the original release (12040). See the Update History here: https://support.microsoft.com/en-gb/...update-history

2 more replies
Answer Match 51.24%

    i have windows 10 home edition on my hp 15. windows updates are set to install on auto on my computer. it updated my version from 1511 to 1607. the problem i have now is that when i put it to sleep, i have to power it off to wake it up, the wifi button is lit and is orange, but in the past it would be off and when i hit the enter button it would wake up . i know this is a issue with windows 10 but i had hopes to find help here, any help is appriecated.

A:windows 10 update to version 1607

Hello, Thank you for posting in the HP Support forum. You may need to update your drivers and adjust some settings in Windows in order to fix the issue. Here is more info: >> http://support.hp.com/us-en/document/c03383935>> http://support.hp.com/us-en/document/c03330139 Hope this works for you.

1 more replies
Answer Match 51.24%

In Can't install Windows 10 Anniversary update, stuck on build 10240 @dalchina advised...





You could try reading the Windows update log...
https://support.microsoft.com/en-gb/kb/902093



...which is good advice for the OP who was on 12040. However, being curious (and not having needed to look at it before) I thought I'd have a look at mine.

I'm on Windows 10 Home Build 14393.187. Apparently since the Anniversary Update 1607 the only thing C:\Windows\WindowsUpdate.log contains is...





Windows Update logs are now generated using ETW (Event Tracing for Windows).
Please run the Get-WindowsUpdateLog PowerShell command to convert ETW traces into a readable WindowsUpdate.log.

For more information, please visit http://go.microsoft.com/fwlink/?LinkId=518345



So I followed the instructions and generated a WindowsUpdate.log on my Desktop - all well so far. Opening it revealed 99% of the entries were of the form:





1601/01/01 00:00:00.0000000 988 5532 Unknown( 10): GUID=638e22b1-a858-3f40-8a43-af2c2ff651a4 (No Format Information found).



Apparently, according to the above 'for more information...' link...





Notes
If you encounter problems decoding the Windows Update log (for example, if you have multiple "GUID" entries that are displayed in the final text log), you may have to delete and then update your symbol cache. You can do this by deleting everyth... Read more

A:Windows update log problem in 1607

I think a better subject is needed for this thread because I don't know how many, including myself, will really understand what "W" is for.

3 more replies
Answer Match 51.24%

Was running Windows 10 64 Bit on my HP DC5700 Small Form Factor  fine, After upgrade to Annivesary Edition I cannot see diaglog boxes login screens etc. It just white on White. I can get in by guessing where items are but cannot see enough to revert. Drivers are up to date.. Help

More replies
Answer Match 51.24%

Title pretty much says it. I have browsed some threads here, and haven't found anything specific to this issue, or helpful.

Anyone have any ideas?

[EDIT]
After 2-3 diagnostic attempts, the last one came back with some info. Screen shot uploaded.

Also, I have also found since posting that one of my 2 other computers can be reached by Remote Desktop Connection. The other cannot. Neither comes up when browsing for another PC, or in Network in File Explorer.

More replies
Answer Match 51.24%

I did a clean install of 1607 on a separate partition and encountered wifi and graphic issues. Unsuccessful searched for appropriate drivers which may be found with further searching.

However, my 3 year old Toshiba is running great on build 1511. Updates to 1511 were received this past Tuesday. And personally, for my needs, 1607 does not bring that much to the table. I did try the new Edge extensions but found the speed performance lacking.

Will older builds continue to receive updates ?

(Toshiba does not support my model for Win10)

More replies
Answer Match 51.24%

During installation i received a BSOD, first 2 restarts went fine, then another one at around 73% i think and BSOD something about system exception not handled. Scanned QR code, damn thing was of absolutely no help at all. Maybe you guys will be able to assist.

More replies
Answer Match 51.24%

Hello, I am the owner of a small laptop, an Acer Switch 10, which only have 32GB of SSD memory inside. I also have a microSD *always* in of 128GB, and a normal 500GB HDD on the keyboard, if plugged, of course.

The internal memory has 6GB free right now, and I can't free anymore as windows folder has over 12GB and total usable space is about 19-21GB.

When I try to launch 1607 update with the upgrade tools, it tells me that I need 16GB free, and doesn't give me the option to choose any other device to store the installation.

If I use media download tool it tells me that it needs 8GB and also doesn't give me the option to select another storage.

Is there a way to install this update? Is it impossible? Am I missing something?

Thanks in advance!

A:Not enough space for anniversary update (1607)

Hello, whilst you can manually download an iso and create a bootable medium from it (mounting it would not be a viable option for you given your constraints) bear in mind a copy of much of your Windows folder will be created as Windows.old on your disk.. for possible rollback recovery. That will be there unless you delete it manually for 10 days from the upgrade.

Now people with 100s of Gb spare on C are also getting this message. One possibility is that (I believe) some 450Mb of unallocated space is needed on the disk. I had a quick read around on this and causes seem obscure 'MS is working on it'

However you are tightly constrained.. and one thing you don't want happening is partitions which are part of the Windows environment being created on a different physical disk.

The iso is about 3.08Gb if I recall.

So
a. Manually download an iso and create a bootable medium
b. Research space issues
c. Create a disk image of your working PC for security (Macrium Reflect (free) + its boot medium + external storage
d. Attempt the upgrade.

Note that for 64 bits, MS states 2GbRam + 20Gb hard disk min. Well, my C: is just over 40Gb, no Windows.old, and I have programs installed on D: not C: and data mostly NOT on C: so 20Gb seems very optimistic.

0 more replies
Answer Match 51.24%

This one has to be the worst of them all. It has taken us back to '90s era when we had to do such stupid things such as take out USBs while installation, install drivers and do backups and all that stuff.

Few days back i decided to install the Annversary Update ie. 1607 update as people said it had many new and improved features. But unfortunately it turned out to be my worst ever Windows experience EVER. Even worse than the Windows 98!

Following unsolved issues which i have been facing so far:-

1) Initially it refused to update and i had to download the HUGE update again and again and again. Subsequently i realised that like old old days i had to remove the wireless receiver of my mouse/keyboard to complete the installation.

2) Even though the installation is complete, 6 out of 10 times windows gets stuck on the black screen and process ONLY if i remove the wireless usb receiver.

3) Cold boot and resuming from hibernation now takes AGES! Prior to the 'much awaited' update a cold boot took around 50 seconds and resuming from hibernation tool hardly 15-20 seconds. Now cold boot takes around 2-3 minutes and resuming from hibernation takes around 1.5-2 minutes. It always gets stuck on the login screen and processes the entered password as if it is negotiating from servers situated on Pluto!

4) My reliable tp link wireless adpater automatically gets unplugged every 2-3 hours or so. I have to unplug replug to make it work everytime.

5) *reserved for more stupid performance ... Read more

More replies
Answer Match 51.24%

Yesterday my laptop was updated to Windows 10 1607. I'm having problems since that update. I now have no folder that simply says pictures...only "saved pictures". Also my virtual keyboard doesn't appear like it did before on start...a small problem, but the picture folder problem is a pain. Can I uninstall this update or do I need to keep it? How do I go about uninstalling it if it's okay to do so.

More replies
Answer Match 51.24%

This morning my Dell Dimension 9200 went through automatic WU Win 10 V1607.

Following this my sound in speakers not working.
My sound is Creative SB X-Fi. Driver details in device manager is: Creative 03/06/2009 6.0.1.1373

I have skype and camera is Logitec web cam Pro 9000.


Tried playing YOU Tube no sound.
I could see green moving on the sound bar...

I did not remove any of the speaker connection from the pin at the back of the computer.

A:No sound in my Desktop following the Win 10 Ver 1607 update through WU

You might try disconnecting the audio jack (probably a 2.5mm ring-tip or ring-tip-sleeve connector), then plugging it back in. I've noticed on my own system that when audio drops because of sleep or other issues, this usually sets things back to rights. Just did it right now, in fact, and got my own audio back.
HTH,
--Ed--

4 more replies
Answer Match 50.82%

Trying to install the KB3185614 (anniversary 1607) update, but getting the 'couldn't complete the updates undoing changes' messages after 100%.  System log shows a 0x8024200D error code. Tried.... 1. uninstalling all anti-virus apps, inc luding cleanup tools afterwards.2. deleting the SoftwareDistribution folder contents.3. downloading the update manually from the MS catalog site and installing from that4. doing an upgrade install using the latest 1607 iso on a dvd from within Windows Anyhting else I could try before I go for the last resort of a clean install using said dvd?. thanksjoe

More replies
Answer Match 50.82%

Windows 10 updated to Version 1607 and I can no longer access my Synology NAS. I have attempted every potential solution I have found on the net to no avail. I have another machine running WIN10 that I disabled windows update on and it's at version 1511 and the NAS is accessible. I called Microsoft support and the tech told me he had no way to trouble shoot this problem. Synology has gone over the top trying to help me with a solution and so far we have been unsuccessful.
Can someone point me to a fix. This is my business machine and I cannot access files I need.
Thanks,
Dave

More replies
Answer Match 50.82%

Hello,I have no touch funktion ( no return by touching a button) since upgrading from 1511 to 1607. I see the touch points of the fingers on the screen, it's also possible to move the windows, but by tipping a button or an icon there is no return funktion.Thank you. 

More replies
Answer Match 50.82%

I have an HP ENVY TouchSmart m7-j010dx Notebook PC, Model #: E0K83UA, Serial #: 5CG3222H1V.  My Simplepass hasn't been working properly for a while, but at least, I could log into my laptop when I turned it on using a finger swipe.  However, after the Windows 10 - 64 bit,  1607 Anniversary update, that doesn't even work anymore.  The swipe pad will light up off and on, as though I could use it, but nothing happens when I try to swipe.  I have to type in my password to log into my computer.  When I try to update SimplePass by launching the software, there is no where to go, to check for updates, even though the instructions for SimplePass indicate you can do so (yet, they fail to explain WHERE to find "Check for Updates" in the software, big miss in the instructions, there.)  Can someone tell me if there is an update to SimplePass so it will recover full functionality, including being able to to log in?  And yes, I've already gone through the log in process in SimplePass to activate that function (several times, in fact), but it doesn't activate the finger swipe log in.   Would be nice to be able to use this function on my laptop since I paid for it :-) Patty

More replies
Answer Match 50.82%

We have two identical laptops in this household and the same problem has been happening on both of them. Since the Anniversary update 1607 (Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3189866)), the computers have been ridiculously slow and running at 100% Disk 0 performance all the time. This is the case even after a full restart. My startup aps are the same as they were prior to the update and I never had such latency. I have done defrags, disc cleanups, malware and virus scans, and nothing is detected. But again, this only started happening after the Cumulative Update for Windows 10 Version 1607 for x64-based Systems, on September 15th.

Fresh from a restart, it takes over 10 seconds for an empty/new Notepad file to open.

I don't know where to start in figuring out how to fix this. Suggestions would be wonderful.

More replies
Answer Match 50.82%

Today I did the 1607 update and after that my wifi doesn't show up.. The unusual thing here is, it shows up other wifi connections around... But not the one I used to connect to. My phone connects to the same without any problem.
Laptop- Lenovo y510p
Os - Windows 10
Network adapter- Qualcomm(latest driver)

What could be wrong.?
Please help me out!!

Thanks!

More replies
Answer Match 50.82%

Today I did the 1607 update and after that my wifi doesn't show up.. The unusual thing here is, it shows up other wifi connections around... But not the one I used to connect to. My phone connects to the same without any problem.
Laptop- Lenovo y510p
Os - Windows 10
Network adapter- Qualcomm(latest driver)

What could be wrong.?
Please help me out!!

Thanks!

A:Wifi doesn't show up after 1607 update

Hi Navan,
open device manager, is it showing a 37 error code if so its roll back time. same prob.

roy

more replies
Answer Match 50.82%

HI  In Windows update I have the AU 1607 update waiting to be installed, so I presume this has already downloaded ..   When this does update will I need to run the fix for HP Recovery Manager as shown here http://support.hp.com/us-en/document/c04876361 Or, as this is a pre installed Windows 10 notebook, NOT upgraded will it be OK? STuart

More replies
Answer Match 50.82%

Hi there -

On 9/25 at 4:00 AM my system, already a Win 10 machine, applied updates bringing it to v 1607, build 14393.187. Since then I have had no internet connectivity - either through wifi or with an Ethernet cable. I rolled back to v. 1511 build 10586.589 but still no connectivity.

In the Network & Sharing Center I see 2 networks - my Ethernet and my wifi, however the access type displays NO INTERNET ACCESS for each. I have rolled back to earlier drivers in the device manager - the device manager indicates that both network adapter is working properly (Realtek RTL8188CE for wifi and Qualcomm Atheros AR8162/8188/8168 PCI-E Fast Internet Controller).

I think the problem resulted in the fact that I had Zoho Assist software installed. I've uninstalled it with Iobit.

I've been trying everything out there.

I've uploaded the wlan report - it looks terrible as a txt file but I couldn't upload the html version. I'd be happy to email it to you.

Thanks so much - I'm not a network person and appreciate everyone's help. I was on the phone with MS for several hours yesterday and it got escalated to Tier 2 but I don't have a lot of confidence in the team out there.

Thanks again.

More replies
Answer Match 50.82%

Does anyone know why this happened? 1607 was a long update...35 minutes or so!

More replies
Answer Match 50.82%

Does anyone have an HP Pro 3515 Desktop that will take the new Windows 10 Anniversary Update Version 1607 ? My HP 3515 works fine with the previous windows 10 version 1511, but will not update to ver 1607. I notice that HP has not currently tested HP 3515 for the latest update. Any help, or comments ?

A:Window 10 Anniversary Update Version 1607

Hi,Firstly I'd like to clarify: I'm not working for any hardware or software vendor. Your printer/scanner had been working perfectly for few years or even decades and now it won't do anything or only few things because of a new Operating system.Microsoft, Apple will never say "Warning: Using this new product, your existing hardware may NOT work at all". They only say their new products will blah blah ....They promise everything then put all the unhappiness, blames to hardware vendors.I believe developing new products is much cheaper than supporting older products and each product must have a life cycle, it must die loudly or quietly and the Operating systems will kill our hardware quicker. Many people just upgrade for a sake of the "bleeding edge", never know and/or research what the existing investments at home will work or not.Just my 2 cents. 

1 more replies
Answer Match 50.82%

Hi there -

On 9/25 at 4:00 AM my system, already a Win 10 machine, applied updates bringing it to v 1607, build 14393.187. Since then I have had no internet connectivity - either through wifi or with an Ethernet cable. I rolled back to v. 1511 build 10586.589 but still no connectivity.

In the Network & Sharing Center I see 2 networks - my Ethernet and my wifi, however the access type displays NO INTERNET ACCESS for each. I have rolled back to earlier drivers in the device manager - the device manager indicates that both network adapter is working properly (Realtek RTL8188CE for wifi and Qualcomm Atheros AR8162/8188/8168 PCI-E Fast Internet Controller).

I think the problem resulted in the fact that I had Zoho Assist software installed. I've uninstalled it with Iobit.

I've been trying everything out there.

I've uploaded the wlan report - it looks terrible as a txt file but I couldn't upload the html version. I'd be happy to email it to you.

Thanks so much - I'm not a network person and appreciate everyone's help. I was on the phone with MS for several hours yesterday and it got escalated to Tier 2 but I don't have a lot of confidence in the team out there.

Thanks again.

More replies
Answer Match 50.82%

Hello, fine people of the internet.

First thing, I apologize if this subject have been solved before.
I browsed through older threads for a while, and looked up on Google, but so far I didn't find a solution to my problem, or maybe I missed it.

I'm here because I'm encountering troubles since a couple days, when I installed the Windows 10 anniversary update.

Let me start from the beginning.

A month ago, I bought myself a new, quite powerful MSI laptop.
The main purpose of this laptop is musical production, using Cubase 8 and a couple of other programs.
For a few weeks, everything worked perfectly fine.
This new laptop allowed me to expand dramatically the possibilities of Cubase compared to my old system.
I could run big projects with 60+ tracks, heavy plug-ins and fancy virtual instruments super smoothly.

But a few days ago, the Windows 10 anniversary update installed itself, and since then, I'm having trouble with my programs.
For instance, Cubase shows heavy signs of CPU and RAM usage (called VST performances, in the program itself.
In the task manager, the CPU peaks at 20-25%) on another project I started a week ago or so, comprising 20 tracks, which used to run extremely smoothly (the said VST performances weren't reaching 2% before the update), but now performs super bad (VST performances now show a 20-25% resources usage when the project is loaded but idle, and the counter will suddenly ramp up to 100%, either if the project is idle or playing back, causing mass... Read more

More replies
Answer Match 50.82%

I tried two times to update, but without any success (many updates before passed without a problem). At the end PC reported that there is a problem and showed for a short time a blue window with the error code and a link to a support. But time was too short to note it and I don't know where to find this report. Is it possible to find it?

More replies
Answer Match 50.82%

unable to find my old backup files after 1607 update august 7

More replies
Answer Match 50.82%

Error message says: We couldn't update the system reserved partition.
How do I address this problem?

More replies
Answer Match 50.82%

I have an HP Pavillion 500-267c desktop system running Windows 10 home edition with updates set to auto install. The currently running system (per settings) is 1571 OSbuild 10586.679. I get a popup message indicating an update to version 1607 has failed. The message also says the failure is due to being unable to update the reserved partition.How can I fix this condition so that the update to version 1607 can be installed,

More replies
Answer Match 50.82%

Failed to install,
I have tried several times , but each time msg appears
failed to update, and system undoes changes .
First time for me this
( several occasions over the years have led to me needing to
reinstall updates, but this one is pretty unforgiving )

I need a trick to start the whole process from scratch I think
but how?
Can't restore to a previous version as option no longer available

A:Cumulative Update for Windows 10 Version 1607

Originally Posted by smileye


Failed to install,
I have tried several times , but each time msg appears
failed to update, and system undoes changes .
First time for me this
( several occasions over the years have led to me needing to
reinstall updates, but this one is pretty unforgiving )

I need a trick to start the whole process from scratch I think
but how?
Can't restore to a previous version as option no longer available



I had that also with this update.
So here is what I did to get over it.
I restarted it then ran the Disc Clean Up app
Which cleared all traces from the Disc
Then let it download and install, which took some time
Then it installed to 30% then Restarted then finished at 100%
Which again sat there for some time then flashed up it had finished and now running all ok on all my systems
Hope that may hopefully help you with your problem
Let us know how you get on
The one thing I found with this one, you cant rush it

9 more replies
Answer Match 50.82%

I click the Start icon and the power button appears. The choices are hibernate, shut down, and restart but it no longer offers sleep as an option. "Sleep" was there prior to the W 10 update.If I go to Settings > system > power and sleep > additional power settings > choose what the power buttons do,I don't see "sleep" in any of the choices that are offered.anyone know how to add sleep as an option?Can the power button be pinned to the task bar as it is on my Acer PC Aspire T3-600?thank you for any help you can offer

More replies
Answer Match 50.82%

Previously in metered connection wifi, if update is selected, it used to shown warning and then update.
In 1607, update just hangs in metered wifi, even after selecting and clicking the option. Any one faced this? Any solutions?

More replies
Answer Match 50.82%

I read that as of August 16th, WSUS would be able to start pushing the 1607 update to Windows 10 to machines.

But, I'm not seeing anything for doing so within the available updates within WSUS, and I'd much prefer to use it than trying to update through flash drives like I had to do during the Windows upgrade period.
 

More replies
Answer Match 50.82%

I have Windows 10 Pro Version 1511, OS Build 10586.589.

Windows continually attempts to download and install the anniversary upgrade.
The download completes, but the installation fails with error code 0x800700c1.
This has happened more than 50 times.
(As appears quite common, I have never experienced an update error before.)

I have tried every suggested fix I can find - nothing works.
I have tried installing from 1607 ISO - fails
I have tried installing using Windows10Upgrade28084.exe - fails
I have tried letting Microsoft Support have a go - fails

I am unable to find the meaning of the error code above, so there seems to be no way to effect action here.
Does anybody have any knowledge on this one?

More replies
Answer Match 50.82%

I have updated my Windows 8.1 Laptop to Windows 10 after the first Release of Windows 10. After the Update, all things were really fast and smooth. At the Weekend, i have updated this installation to Windows 10 with Anniversary Update and the Laptop becomes extreme slow.

Starting of programs takes a very long time. For instance, starting Firefox with a clean profile and no addons needs 2 Minutes. If i start a Explorer Window, it takes nearby 50 seconds to open it. The Laptop has switchable graphics solution with the following technical Details:

Display adapter 0
Name AMD Radeon HD 8400 / R3 Series
Board Manufacturer Toshiba
Memory size 1024 MB
Vendor ID 0x1002 (0x1179)
Model ID 0x9830 (0xFA34)

Display adapter 1
Name AMD Radeon R5 M200 / HD 8500M Series
Board Manufacturer Toshiba
Memory size 512 MB
Vendor ID 0x1002 (0x1179)
Model ID 0x6663 (0xFA34)

Chipset
Northbridge AMD K16 IMC rev. 00
Southbridge AMD Kabini FCH rev. 7.2

If i look at the Device Manager all Drivers are installed. There are no Symbols with Exclamation Marks or anything else like that. If i look in to the Taskmanager after clicking on the Firefox Icon, HDD utilization is at 100% for a looooong time and Firefox.exe as the Top Consumer with Transfer rates of 3 MB/s. But thats not the only strange thing: if i would like to play a game like Starcraft or any other Game w... Read more

More replies
Answer Match 50.82%

Just now this morning, Windows Update on my 8" tablet finally said "Here I am!"
Now I wish I had my Surface Pro (gen 1) handy to see if it has finally shown up there as well.
Hopefully that bug affecting systems where apps and data are stored on the SD card has been fixed...

A:Anniversary Update (1607): so that's what staggered means

Originally Posted by wpguy Just now this morning, Windows Update on my 8" tablet finally said "Here I am!"
Now I wish I had my Surface Pro (gen 1) handy to see if it has finally shown up there as well.
Hopefully that bug affecting systems where apps and data are stored on the SD card has been fixed... great news, do tell us how was your upgrade experience :)

1 more replies
Answer Match 50.82%

I have an Acer Aspire ES1-711-P14W, When I initially reinstalled my touchpad wasn't working so I installed these drivers from Acer it worked fine until I updated to Version 1607 Build 14393.10:
Chipset Intel Chipset Driver 10.1.1.7IO Drivers Intel Serial IO Driver 604.10135.1001.53001MBI Intel Sideband Fabric Device Driver 1.70.305.16316TXE Intel Intel TXE Driver 1.1.0.1064TouchPad ELANTECH Touchpad Driver 13.6.3.1

A:touchpad stopped working after 1607 update

Touchpad is unresponsive as well as Acer support! HELP!!

1 more replies
Answer Match 50.82%

Stuck at 95 percent, will it finish, been their for 6 and 1/2 hours... is their a way to download it manually? (pls is their a way to stop the download loop of 95 percent so I could download the update and manually do it, - well will try leaving machine one all night to see if it corrects itself, if not is their a way to get the download to stop and as I mentioned above do it manually.

My Dell will not fix this machine so I have start up in manual Dell (this is the 6th replacement of this machine and it will not keep any 3rd party software like my Office 360, Works, AVG Ultimate has to be reinstalled every 18 hours (professionally twice). Dell warranty of if not fixed over internet, will have a tech out the next day, well 3 months I got the over the internet, so I start up in "safe boot" dell, then switch to the Microsoft Logo for the remainder of the start up. I cannot watch a movie of 578 MB with a speed of 118.98 Mpbs with 8 GM of RAM (requirement for the quality of my AMD R5 the Vudu platform only required 11,000 KB to stream their highest quality, which this system has but I can only play one movie at SD and the have to manually clean out catches (automated companies 1970/80/90, merchant, have every version of Microsoft since first PC sold, so think I own 580 versions starting with XP. Terminally Ill US Veteran and with 55 heart attacks wish someone at Microsoft could help, they only seem to want to sell more "One Drive" spaces, yet all my files a... Read more

More replies
Answer Match 49.98%

After suffering through an update process that took a total of about 18 hours to download and then install the Anniversary Issue of Windows 10 I've had a series of problems:

DAY 1 Firstly, the system seemed to be stuck in an infinite loop of trying to install. I waited many hours and then finally did a hard reboot which seemed to allow the update to get over some hump and finalize. Then, for a day everything worked fine, and my two monitors also were fine. After shutting the computer down for the night and restarting it in the morning, this is what happened...

Day 2 Windows seemed to boot okay, except that both monitors would flash on and off, and I could hear the 'program start' sound and the 'program close' sound each time. I left it for a long time to see if it would resolve, eventually it did and everything was working fine.

Day 3 I received a message saying that "ASUS AI Charger and AI Charger Plus was removed because it doesn't work for this version of Windows. The monitors flashing and the program start and program close sounds resumed. I left it for a long time to see if it would resolve, but it did not. I unplugged my secondary monitor, DVI-D, and voila, the flashing stopped on the main monitor everything is fine. If I try to plug in my secondary monitor again, it goes back to flashing.

Any suggestions on what to do? I would very much like to have my secondary monitor back in use!

Thanks for any help.

More replies
Answer Match 49.98%

What's the difference between Windows 10 Feature Update 1607 and the Anniversary edition? My computer just finished updating (took best part of an hour) and I was told that Feature Update 1607 had been installed. I was then asked if I wanted to install the Anniversary Edition. When I asked for more information, the file Windows10Upgrade28084.exe was downloaded; I haven't yet run it.

Thanks,

More replies
Answer Match 49.98%

Windows 10 automatically did update 1607 (KB3176936) about 6 days ago on my wife's pc (HP Envy H8-1534). Since then I have not been able to start up the pc the first time I power it up. When I hit the power button the monitor comes on with the HP logo on black screen as normal but the loading icon (spinning dots) does not start up. The fans start up but there is no activity on the tower in the way of any blinking lights or beeping sounds. If I power off the pc using the power button, wait about 10 seconds and power on again, the pc will start up as normal. So far for the past 6 days it has required this 2nd attempt to startup the pc every time. It almost seems like there is no power going to the system except for the fans in this first startup attempt. I have run a Start-Up test by pushing the F2 key with no issues found. I have disabled SATA Power Management in the BIOS. I have run Windows Startup Repair with no results. Below is the results from the txt file. I have been researching every possibility. I am afraid that this could start getting worse. All help will be appreciated. Name: Target OS testResult: Completed successfully. Error code =  0x0Time taken = 265 msTest Performed:---------------------------Name: Volume content checkResult: Completed successfully. Error code =  0x0Time taken = 2391 msTest Performed:---------------------------Name: Boot manager diagnosisResult: Completed successfully. Error code =  0x0Time taken = 63 ms... Read more

More replies
Answer Match 49.98%

My desktop and laptop have updated to Version 1607, Build 14393.187 (Windows 10 Home), and the update conveniently uninstalled three of my favorite programs--Windows Movie Maker 6, Chess Titans, and Spider Solitaire. I had installed Chess Titans and Spider Solitaire successfully in Windows 10 using msgames_win8_x64.msi, but now when I try to reinstall the games, the icons reappear, but the games won't start. The new version won't let me reinstall Windows Movie Maker 6 at all.

Funny thing is that Revo Uninstaller shows both Windows Movie Maker 6 and MS Game for Windows 8 listed as installed.

Is there an additional step or setting that would let me reinstall these programs? Thanks.

More replies
Answer Match 49.98%

Now I go to updates and I get this Error can any one help please

Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3176495) - Error 0x80070015

A:Cumulative Update for Windows 10 Version 1607 Failed

Solved

Downloaded this tool
https://support.microsoft.com/en-us/...troubleshooter

go to Settings update Advanced options click Give me update from other Microsoft //////

it worked

1 more replies
Answer Match 49.98%

Thread Title pretty much tells everything. My mouse scroll speed went crazy after 1610 update. It's just too fast, not only in browse, but everywhere!

How to fix it?

A:Mouse Scroll Speed too fast after 1607 update

Originally Posted by godderdam


Thread Title pretty much tells everything. My mouse scroll speed went crazy after 1610 update. It's just too fast, not only in browse, but everywhere!

How to fix it?



Scroll can be adjusted thru Start > Devices > Mouse & touchpad.

3 more replies
Answer Match 49.98%

Hello,  My system automatically updated windows 10 1607 update.  As a result my reboot ended up with blank screens.  I ended up connecting HDMI cables to the system HDMI inputs  so I can at least see the screen.  I have not been able to locate my GTX GC.  Instead I now see the the integrated graphics card ---- the 530....I tried recovering to a previous date before the installation of the patch...I still didn't see the card.  I tried to reload the drivers for the card and it stops saying " hardware not located". I have tried everything I can think of in my limited scope of knowledge.  I even completely reloaded the system. (made windows 10 boot usb)  and downloaded all of the Drivers from HP. Tried to reload....NOTHING.  I think during the reload of windows 10...it updated...the 1607 before I ever logged on.  HELP somebody..pretty please! thanks, Patrick

More replies
Answer Match 49.98%

Updated computer last night before going to sleep and now my headphones no longer work with the odd exception of Skype. I have tested in internet explorer and chrome as well as multiple gaming platforms for PC (Steam and Blizzard). The update I was notified of having gotten upon startup is 1607. All of my audio drivers are reading as up to date and the only thing that has changed since last night is this update.

More replies
Answer Match 49.98%

Hi, To lazy lenovo "moderator" and producer of this piece of crap (Lenovo Y700 15ISK). The win 10 version 1607 update casused a black death on laptop, managed to recover to previous version of Win and postpone the update until tmrw night. But can NOT much more than that. So Lenovo, pls say what can be done ASAP? Do not waste time and get to do something useful for once. 

More replies
Answer Match 49.98%

Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3194496)

Three days ago my desktop tried to update 1607 3 times. Each time on reboot it says failed to update and reverts. Each day it tries again at shutdown.

Yesterday my second(son's) computer updated and all I could see was a black screen with a circle. Had to do a repair and it reverted back 2 two updates. Note, this computer does not have integrated graphics - so that fix process would not work.

Now the wife's computer wants to update but I am not restarting it - if hers goes down it will be hell in my household.

I looked on the web and don't see much about this update getting fixed by Microsoft. Any ideas what I should do? My main computer is asking to try again and it will just fail or worse - black screen. I told the family not to shutdown the wife's but I know at some point it will try to do the update on its own.

This is the worst mess we have ever had, but all I see are web pages about the anniversary update - not this one.

More replies
Answer Match 49.98%

This is a brand new machine -- had it maybe 2 weeks.  Bought this configuration for games such as Rome Total War, Skyrim, etc.After the Microsoft -- Update for Windows 10 Version 1607 for x64-based Systems (KB3199986) on 11/08, the R7M440Graphics with 4 GB has stopped being recognized.The system now only uses the integrated R5 graphics which has limited memory.  Some games warned me and allow me to use main memory, others just lock up. The Radeon software shows it "Linked" to the R5 but it is not being used.Is there anyway to make the R7M440 the primary graphics?

More replies
Answer Match 49.98%

I want to update Windows 10 to build 1607, so I downloaded the Restone ISO and then created an USB bootable drive. I just want to upgrade without losing my files and settings, but the installation wizard tells me I need more room on C: partition, when I currently have around 7 GB free, while it asks for 10 GB of free room in the C: partition. Is it possible to extend the Windows system partition (by shrinking the D: parition), or I risk making the system partition unbootable?

I use EaseUS Partition Master to perform disk and partitions management, but it seems like I can't extend the system partition. I'm able to shrink D: partition, but I can't use the unallocated space to extend the C: partition. Is it possible with another tool or I'd better just make a clean install on the system partition? I have tons of programs installed, and it would take days to install everything again.

I only have one HDD in my laptop, installed in UEFI mode with two GPT data partitions, C: and D: Thanks in advance.

A:Is it possible to extend Windows sytem partition to update to 1607?

A screenshot of disk management would help:
Disk Management - How to Post a Screenshot of - Windows 10 Forums

Also, I recommend you use MiniTool Partition Wizard:
MiniTool Free Partition Manager for Window 8/7/vista/xp | Partition Wizard Free Edition

2 more replies
Answer Match 49.98%

Hi:

Where to find KB3190507x-64 to get manual download?
Thanks, dbwin10

A:Cumulative Update for Windows 10 Version 1607 for x64 KB3190507

Normally, you check the Microsoft Update Catalog to grab stuff. But this is a cumulative update that's been superseded by a later update. Looks like MS is removing older cumulative updates when they post newer ones.

HTH,
--Ed--

0 more replies
Answer Match 49.98%

Howdy,

I have been trying to download and install Cumulative Update, Win 10, Version 1607 for x64-based systems since Sept. 15 but so far I am coming up empty. I realize the help forums have been loaded with folks having the same problem but I decided to start my own thread instead of joining in ones already started in case it is a result of what kind of computer I am using and the Programs I am running on it.

First of all, I am running on an All-In-One HP Pavilion 23-g017c (x64) AMD A6-5200 APU w/Radeon HD Graphics, running Windows 10, Version 1607, Build 14393.105, using the Edge Browser while utilizing Windows Firewall and Windows Defender as my major security programs.

I have tried daily to install the update via Windows Update but it does not install for one reason or the other. Some of the threads I have visited the last few days suggest to manually download and install it from the Windows Update Catalog. I tried this manual install both yesterday and today and came up empty both times.

I have never had any major problems with Windows 10 when it comes to receiving updates so this has me dead in my tracks.

So, basically I have three questions:

(1) Any ideas of anything I can do to get this update on my computer? or

(2) If people like me are having trouble with a particular update will Microsoft eventually come out with a fix? and/or

(3) Does Microsoft have a link for people with update problems like the one I am experiencing?

I will appr... Read more

A:Can't install KB318966 (Cumulative Update, Win 10, Version 1607)

There's a number missing from the KB, usually is 7 digits. As far as I know I'm on the latest, 14393.187, haven't checked last few days.

1 more replies
Answer Match 49.98%

Hey, ???

I'm just getting a Windows update now (ca. 10:13 AM Brisbane Australia) - my laptop screen suddenly went black and when things reappeared, previously-open windows were misaligned and differently sized.

The Windows Settings box which had been showing downloads (I had hit "search for updates") was blank. I rebooted it and it shows "Feature update to Windows 10, version 1607" downloading. I'd researched 1607 and had understood it amounted only to a download in megabytes if you already had 1511 (which I do).

I'm on metred connection - is this going to happen all the time??

ausgumbie

A:Feature update to Windows 10, version 1607 - WHY 3+ GIGS?

Originally Posted by ausgumbie


Hey, ???

I'm just getting a Windows update now (ca. 10:13 AM Brisbane Australia) - my laptop screen suddenly went black and when things reappeared, previously-open windows were misaligned and differently sized.

The Windows Settings box which had been showing downloads (I had hit "search for updates") was blank. I rebooted it and it shows "Feature update to Windows 10, version 1607" downloading. I'd researched 1607 and had understood it amounted only to a download in megabytes if you already had 1511 (which I do).

I'm on metred connection - is this going to happen all the time??

ausgumbie



Don't know you're whole situation, but that wording and the size of ~3GB sounds an awful lot like the Anniversary Update download.

more replies
Answer Match 49.98%

after the automatic update 1607 my printer is no where to be found and unusable. how can i get it to re-connect

A:automatic windows 10 update 1607 - printer lost

Hi! What is the make and model of your printer? Have you used the Windows trouble shooter? Have you checked the device manager? Have you done any thing to get your printer to connect?

1 more replies
Answer Match 49.56%

Hello,

I recently updated my notebook to Windows 10 Home (1607) from the previous version of Windows 10 Home.

I was in the process of performing a disk-cleanup to regain some space lost during the upgrade (notebook only has 120 gb of storage to begin with) when I noticed some extra partitions that weren't there before the update (I noticed this in the disk defrag app). I then opened EaseUS' partition manager app and saw the following:



Can anyone suggest which of these partitions I can delete/merge into C: to free up extra space? I know Recovery probably shouldn't be touched, but what about the other unallocated partitions? The partition above Recovery looks like it could also be similar (but without the label).

Any help/guidance/advice would be greatly appreciated.

Thanks!

A:Which partitions are safe to delete/merge after Windows 10 1607 update

You can very easily add the 17.99 GB unallocated space to C: drive. I'm not sure what the 811 MB partition is after that. Maybe some kind of manufacturer's recovery partition, but it looks too small to be that. You can use MiniTool Partition Wizard to explore the partition and see the folder structure on it without assigning it a drive letter.

I would just add the 17.99GB to C: drive and leave the rest alone.

MiniTool Free Partition Manager for Window 8/7/vista/xp | Partition Wizard Free Edition

0 more replies
Answer Match 49.56%

Hi All,
I'm getting this update right now. Download is at 90%.... not sure how long it's been going.
A search on Google says this is for Insiders but I am not an Insider.
Anyone else getting it?

A:Cumulative Update for Win10 Ver 1607 for x64-based Systems (KB3194496)

See: https://support.microsoft.com/en-gb/kb/3194496 for details.

1 more replies
Answer Match 49.56%

The issue in short is in the title. Feature update to Windows 10, version 1607 - Error 0xc1900204
The update does not seems to install. Any fix to this issue?

More replies
Answer Match 49.56%

It seems facebook app just open & closes right away on the Anniversary edition Version 1607 build 14383.187. I uninstalled & reinstalled app & no dice. I went also again to apps, features. facebook advanced options & reset still no dice. Anyone find a fix to this yet? or just another dud software.

More replies
Answer Match 49.56%

I have tried multiple times times to install the Windows 10 Pro, Anniversary Update to my desktop computer, a Dell Inspiron 560. Every time, the result has been a computer that will not start-up, ie. Windows does not appear to load/run. I have tried the WURepair tool and tried to repair the System Registry HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Windows NT>ProfileList, all to no avail. I have had to restore my system with an previous Image to get it operational again. Has anybody else had this problem and been able to come up with an answer?

A:Trouble trying to install Windows 10 Anniversary Update, version 1607

Hello JRAllen72653 Welcome to the Ten Forums!

One advice I can provide here would be to try a different method for either update by upgrade or planned clean install which doesn't seem to be what you have been looking for. When the Redstone 1 update didn't even arrive here for 3 separate desktops as well as a recently new laptop where 10 came already on not seeing the update still lead to fail of the MC Tool to see the immediate online upgrade take place or create the usb media needed.

Twin solutions were then sought! The first in order to see all machines updated was to download the "windows.iso" by way of the MC Tool which equals both the 32bit and 64bit flavors for both the Home and Pro editions. We call that a "4 in 1" type of download that covers everyone.

The second item on the agenda did opt to use a 3rd party program not the Windows option to mount the iso downloaded onto each machine or run from a flash drive where the setup.exe main executable would be manually started to watch each upgrade install take place. Once all systems were set which included one desktop only lately being upgraded from 7 Home Premium to 10 Home and then still waiting for the update to go on before return to owner was to visit a MS download iso type page to grab both the 32bit and 64bit smaller Dual Edition iso downloads to keep onhand.

For a final fix to all older already made up flash drives for the Threshold 2 update last November as well as for Windows Insider P... Read more

3 more replies
Answer Match 49.56%

I am running WIN 10 on a desktop PC and as of Monday I had all the current release updates installed (Not an insider on this PC)

Tuesday night I used the "check for updates" and walked away.

This AM I had an error message. I selected the "Fix issue" radio button and got an error message "windows 10 couldn't be installed. You can't install windows on a USB flash drive using setup"

I have NO USB flash devices installed, only a USB mouse/keyboard.

More replies
Answer Match 49.56%

lumia 640 xl first time upgrade windows 10 mobile anniversary version 1607 can received ?

More replies
Answer Match 49.56%

Just a heads up, I found OneDrive wouldn't open from the Start Menu after the Windows 10 Anniversary 1607 Update, it crashes before it opens to your OneDrive location in explorer.exe.  Reliability History shows the following:
Faulting application name: OneDrive.exe, version: 17.3.6390.509, time stamp: 0x5730e595
Faulting module name: KERNELBASE.dll, version: 10.0.14393.0, time stamp: 0x57898e34
Exception code: 0x406d1388
Fault offset: 0x000d96c2
Faulting process ID: 0x1758
Faulting application start time: 0x01d1ecff033313b8
Faulting application path: C:\Users\UserName\AppData\Local\Microsoft\OneDrive\OneDrive.exe
Faulting module path: C:\WINDOWS\System32\KERNELBASE.dll
Report ID:
Faulting package full name:
Faulting package-relative application ID:

This is a long time problem I've noticed with EMET, although it usually happens when updating EMET to a new version.  This time it was an OS upgrade that triggered it. 

To stop onedrive.exe crashing (or any other applications you have set in the application protections list that are crashing) you need to toggle the security setting in EMET, which for some odd reason fixes it.  For example:
1) Turn 'Certificate Pinning' to the opposite of what you currently have it set to, or change the 'Block Untrusted Fonts' to one of the other settings other than what you have it currently set to.  That makes the Quick Profile Name change to 'Custom
Security Settings'.
2) Then go to Quick ... Read more

More replies
Answer Match 49.56%

Can't install cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3197954) Failed to install several time, any help thx.

More replies