Tech Problem Aggregator

Replacing a fan in compaq presario

Q: Replacing a fan in compaq presario

Hello! I am attempting to change a 80mm fan in my Compaq computer. The fan I want to change is, I believe, called the CPU fan. It has a lever next to it and 4 screws holding it down. My question is this: Do I have to move the lever on the side of the fan in order to pull the fan up and proceed to remove the screws or do I just remove the 4 screws? Also, how do I remove the screws considering the awkward position they are in? (I've been working on trying to remove the screws; however, it is difficult to maneuver the screwdriver into the top of the screws to remove them. This is because part of the fan case is above the screws making it necessary to place the screwdriver sideways in order to remove the screws.) Thank you for your response.

More replies
Answer Match 85.68%

I tried to install windows onto my laptop. It went through the set up process, but when it got to the install part, I got an error message stating that Windows could not find a HDD installed on my computer. So, thinking something was wrong with the HDD, I bought a new Wester Digital HDD. After installing the new HDD, I again tried installing windows, with the same outcome. Someone has told me that Compaq is bad about putting "blinder" codes in their BIOS to hide the HDD from being overwritten. I called Compaq Tech Support, but because my warranty is out, they wanted an arm and a leg to "help". Is there any truth to this? Does anyone have a solution for this problem?
 

A:Replacing HDD in Compaq Presario Notebook

If this is a SATA hard drive, you need to install SATA controller drivers at the F6 prompt. Since this procedure needs a floppy drive and you probably don't have one, go into the BIOS and see if you can change the controller from SATA or AHCI mode to IDE mode. If have this option, then Setup should continue.
 

2 more replies
Answer Match 84.42%

Hi,

During the last few months, my laptop has been used a considerable amount. Unfortunately, my sister borrowed it while I was away at my orientation for college. She broke parts of the keyboard (the parts holding the key into place, and some other things), and I am currently using it mostly taped together. Lucky for me, the tape is holding and still working...

However, my dad who has been a computer guy for many years, wants to replace the keyboard unit, so that way when I get to college it won't be as bad.

The laptop itself is a couple years old, and I don't want to get a new one.

So I was wondering if there are any step by step tutorials for a Compaq Presario 2500. Any help would be much appreciated.
 

A:Replacing Keyboard on a Compaq Presario 2500

might help
http://schwinger.harvard.edu/~motl/hp-keyboard/compaq-keyboard.html
 

2 more replies
Answer Match 75.18%

I have a Compaq Presario C300. Somehow the screen cracked and of course was not under warranty. I purchased a replacement screen online and followed the directions to replace. It was relatively simple, however, now when I boot up the computer, the backlight comes on for the whole screen, but shows up blank. Did I just not fully connect something? Is there something simple I can check before I bring the whole darn thing in for service anyway? This is what I was trying to avoid in the first place. The whole laptop was only 800 and the new replacement screen was $199 (as opposed to the quote for $450 I got to have it replaced).

Anyone have any ideas I can try?
 

A:Replacing Compaq Presario C300 LCD Screen: blank screen now

You have to make sure you bought right screen for your laptop. Check your connection cable hasn't any damage on it. If it still shows only blank screen, i think not coming enough power for screen (wrong screen).
 

1 more replies
Answer Match 65.1%

Hi, My Computer a Compaq Presario SR1810NX with Windows XP Home Edition SP2 is having an issue with it wont get past the Compaq Logo Screen, like, I press the power button the PC powers on, Fan Speeds up and then slows down as normal, keyboard lights flash as normal and the Compaq Logo along with the v3.48 and ESC = Boot Menu options appear on screen, the things is that it wont get past this screen, it just sits there at the Compaq screen, the keyboard and mouse dont seem to be interacting with the PC since I press ESC or F10 for boot mode or system recovery but the PC wont answer at all, I've already Disconnected power source unplugged mouse, keyboard all but PC is doing the same thing just sitting at the Compaq Logo Screen, the computer doesnt make any sound at all no beeps or anything, it wont let me access Windows at any time, recent installations well could be that I just installed a Mobile Bandwidth Card just a couple of weeks ago, and also just a few days ago I connected my iPod Shuffle 2nd Gen to the computer and the computer wont recognize it at all, not even charging, I know this might be a virus or malicious software, but my computer has barely connected to the internet in the last weeks (I couldn't pay the Internet and I had to use my friend's Mobile Bandwidth Card I mentioned before) all I did while in Internet with the Mobile Bandwidth was some schoolwork and youtube videos, I need help urgently with this since I have to deliver a very important proyect for scho... Read more

A:Compaq Presario SR1810NX Not Getting Past Compaq Logo Screen

Try a power drain.
1. Unplug power cord
2. Hold power button in for 60 seconds or more then let go
3. Plug in power cord
4. turn on the power and try to boot to setup (BIOS)

If it enters the BIOS then you should be able to just press F5 to reset to defaults and then F10 to save and exit. The PC should work now.

However, if after the power drain you still can not get in the BIOS than there is a MAJOR problem which would require some type of repair.

1 more replies
Answer Match 65.1%

i dont know anything about computers so i will need a detailed explanation and i need to know how to fix it!! it just stays on the compaq screen

A:My Compaq Presario 2500 wont go pass the compaq screen

Hello lilevee22,

Before the problem started was anything added to or installed on the system?

Try booting to Last Known Good or Safe Mode.

Restart the computer during the boot process repeatedly tap "F8" you should get

the Advanced Options.

Let us know if able to get the system to boot with either option.

1 more replies
Answer Match 64.26%

Cant find the neccessary drivers for the internet have been here

http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=3559331#N337

None of the drivers for ethernet or my wireless card work ???

This is a friends latop they had a virus so i reformatted and now no internet via wirless or wired
any help appreciated.

The virus was a virut file infecter virus so i was afraid to save any of the drivers for fear of reinfection.

Edit:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 1525 Mb
Graphics Card: Standard VGA Graphics Adapter, 5 Mb
Hard Drives: C: Total - 102547 MB, Free - 89975 MB;
Motherboard: Hewlett-Packard, 30D9, 83.21, CND80437PP
Antivirus: None

If any more info is needed let me know!!!
 

A:Solved: Laptop Compaq Presario C700 (from HP Compaq)

14 more replies
Answer Match 59.22%

I have been attempting to replace the power supply in a Compaq Presario 5330US (Compaq P/N: 470019-713). It is a Pentium 4, 1.7 GHz with 512 RAM.
The motherboard is Compaq: KSR1983077 Spider-S
The power supply is a 235W (250W on plate), p/n 243890-001

It is not a standard ATX power supply, or at least the connector to the motherboard is not pinned to the ATX standard. It has a 24-pin connector vs. the 20-pin ATX (and it's not the latest 2.0 version). I tried a standard Antec PS and the unit failed to turn on, and the motherboard LED indicating power present does not light. AND the wires from the PS do not use the ATX color coding. Compaq does not offer a higher wattage PS.

What are my options?
- I would like to just splice my new power supply to the existing connector, but I do not have the pin-out to properly match up. Does anyone have a source for this info, and don't say HP/Compaq support.... Been there, done that... again, and again, and again......
- I want to upgrade the PS to accommodate a new video card (the card suggests a minimum 300W), should I just try it/chance it with my existing PS?

ANY and ALL help is appreciated.
 

A:Replacing power supply in a Presario

you already bought a good PSU, and you have a new video card...

just buy a new MoBo, you can get one for that CPU on newegg for about $40. then it will use standard ATX connectors, and will be better than the compaq board that came with your system.
 

6 more replies
Answer Match 57.12%

I friend of mine purchased this Presario in 2004. She hasn't had internet since about 2006, so she hasn't had any of the updates since then. I brought her tower home with me since I have internet to load her updates. We're trying to get it internet ready. When I brought it home last week nothing would open. So yesterday she gave me the system recovery disc. I started with the Standard Recovery, but there were too many files that it couldn't recover. So I then decided to do a full recovery. After the full recovery it was rebooting and it told me that not all the system could reload and I couldn't hit okaybecause it wouldn't read / acknowledge my mouse. So, I unhooked her computer and rehooked mine to see what her alternatives were. I found a website, they wanted to know all the things it wouldn't oload. All I can remember is that it was things that could me downloaded later like: Norton, AOL, Adobe, MSN, and QuickTime.

So, I unhoked mine and rehooked her's up (and booted up my laptop). When her's came back up it's saying: NTLDR is missing Pres Control + Alt +Delete to Restart

My question for you is there anyway I can save her conputer? She doesn't have a lot of funds, being a singe mother of a 7 yr old and I'm just a good friend trying to help her out.

Thank you in advance for any help you can provide

A:Compaq Presario

I decided to see what happened when I ctrl alt delete and then decided to do another recovery. Here's some more info (could not recover errors):
1. C:\WINDOWS\Help\SB\Training\WXPPer\Content\Wave\[email protected]
2. C:\WINDOWS\System32\ntdll.dll
3. C:\WINDOWS\System32\ntkrnlpa.exe
4. C:\WINDOWS\32\dllcache\dinput8.dll
5. C:\Windows\systme32\dllcache\licdll.dll
6. C:\WINDOWS\system32\dllcache\locator.exe
7. C:\WINDOWS\system32\viaservc.dll
9. (Black screen instead of error message)
9. C:\WINDOWS\Installe152ec/msi
10. C:\WINDOWS\Installer\1b2cc.msi

then all of after about 20% a big blue screen with following:
A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen, restart your computer. IF this screen appears again, follow these steps:

Check to make sure new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup... Read more

3 more replies
Answer Match 57.12%

Hi. Does anyone know if a Compaq Presario SR1150NX does the display system support component video (Y, Pr, Pb) signal output function? Thanks
 

More replies
Answer Match 57.12%

sir, can u help me, i can't fint my driver for compaq presario v3760TU
previously, i used vista home basic but i convert to window seven.. but i can't find my driver in hp/compaq driver web.. plzz help me..
-sory for my english so bad..

A:compaq presario

Were you at this Hp/Compaq download page ?


Software & Driver Downloads Compaq Presario V3760TU Notebook PC - HP Customer Care (United States - English)&

6 more replies
Answer Match 57.12%

ok I hace a compaq that is all messed up. lets see one day the monitor would not work after a storm. Bought another, For a while the screen would be blue but change back to normal. The pc also would have a hard time starting up after it was in idle. We would do a hard start and for a while that worked. Now when I try to start it it turns on but the monitor says no vga/dvi input. There is also none of the preverable beeps that are supposed to be there so in short (well long)the motherboard is fried? So do I use it as a planter in the yard or is there a way to get it up and running. It runs on XP media center it has a micro ATX form factor motherboard it is also an AMD 64 Anthlon. ram is 256 mb 1Rx16 pc 4200 ddr2 533 mhz. With all that said can I just replace the motherboard and reinstall the reinstallation disks and be up and running? ( if it could only be so easy) What about the cpu. i know many questions here thanks for patients. Please help me. Tina
 

A:compaq presario

does your system have agp or pciex (or even pci) slot free? Is the graphics on board? It sounds like a graphics card problem, even if it is onboard. I'd try a replacement card (even if it's just a pci card) and see what happens...
 

1 more replies
Answer Match 57.12%

I have a compaq presario. I have 2Gig memory. I changed services from ATT to comcast internet. now my pc needs to be wiped clean and set up again but when I got the computer I did not get the discs. how can I do this without discs> it wont open up the internet even though I am connected.

Please help
 

A:compaq presario pc

8 more replies
Answer Match 57.12%

I have purchased a Compaq Presario 600 with an Athlon XP 2200+ processor. I do not have a copy of Windows XP to wipe it with. Is there any way with the installed XP that I can refresh this system and remove data frome previous owners? Or Can I load Win 98?
 

A:Compaq Presario 600 ??

Compaqs usually have a hidden partition with all the factory loaded software on it in an image format. As long as it does and you can figure out how to access it you could probable do that - but you almost likely need the XP Product key and may need to reactivate XP after the recovery. XP can only be install on one machine at a time - so if they are still using it you are out of luck.

Watch the boot up for any recovery messages or take a trip to www.Compaq.com and look up the info for your make/model.
 

1 more replies
Answer Match 57.12%

my compaq presario cq57 says system disabled 62359871..plz help. thank you











Solved!
View Solution.

A:compaq presario

@sharp66? Enter   73031277

3 more replies
Answer Match 57.12%

How do you open the casing on compaq presario 5304. I don't want to breakit.\

Thanks.
 

A:compaq presario

Link to tell you all about your computer. http://h10025.www1.hp.com/ewfrf/wc/...ry&tool=prodinfoCategory&dlc=en&product=93186
 

1 more replies
Answer Match 57.12%

ok when i start up it shows the compaq logo then theres some beeps and it goes to a black screen. Any help? any way to reset all my stuff? i press f11 and it goes to some bios thing and i really dont know what to do. Thanks
 

A:Compaq presario help

16 more replies
Answer Match 57.12%

How do you access the Bios on a Compac Presario 4110. I keep getting the message 162 Sytems Options not set. 163 Time and Date not set. Having visited Compac they were not a lot of help. Downloading the software recommeded by them was a waste of time, still got the above message. Tried all the usual keystrokes etc no good. Any suggestions would be appreciated.
 

A:Compaq Presario

9 more replies
Answer Match 56.7%

hello recently my pc has been failing to start up and asking to go to the start up repair my pc is fine but will this lead to future problems

thanks ~shadow

A:compaq presario cq60 help

Hi and Welcome to TSF!

What did startup repair find?

Do you have your Windows cd?

2 more replies
Answer Match 56.7%

yeah, it's ancient, but i'm just getting it up and running to sell it. i got it from a friend. ok, my question is- why is the cpu fan missing? and why don't i see a set of pins on the motherboard for the fan?
i thought all cpu's needed a fan, so where's the power supply for it? (the cpu is a pentium 120mhz)
 

A:compaq presario 4112

Hi, Kerri Ann!

Not necessarily. A 120MHz may not need a fan on the CPU. It will more likely have a large heatsink, and an exhaust fan at the back.
 

1 more replies
Answer Match 56.7%

A friend has a Presario X1300. It has a small problem. The power button only works once in a while (perhaps 1 in 20 presses). I thought perhaps it was a cold solder joint but even after touching up the button's pads its still has the problem.

It could be a bad switch, it looked like the switch had previously been replaced (although he hasn't had it serviced except to put in a new hard drive about a month before the switch went bad).

I found a post that indicated that someone found schematics for the motherboard and I was hoping that someone here would be able to point me in the right direction. I didn't find them on google. I'm going to replace the switch first, but if that doesn't work I have to assume there's some other problem that will need debugged.

I hate to see such a nice laptop go to waste because of a stupid power on problem.

I have found the service manual online. Its great, but has no schematics.

Thanks for any ideas you can offer.

Raydude
 

More replies
Answer Match 56.7%

i have a compaq presario SR5210NX with windows vista home premium ,it has a problem in/windows/system32/ntkrnlpa.exe,the state is 0xc0000225 and the information says the kernel doesnt responde or isnt working .it says introduce the installation disk windows ,but i dont have it and i couldnt enter to the recovery system

More replies
Answer Match 56.7%

How do you get to the HHD drive in the compaq presario 1456VQLIN?
 

A:Compaq presario 1456vqlin

I'm not finding that model so that must not be the model number. Typically, you turn over the laptop and the hard drive should be under a large panel...
 

1 more replies
Answer Match 56.7%

My aunt has a compaq presario desktop pc and for a couple of months she turns on the computer and it takes like a half hour to get to the desktop then it goes really slow.it goes a little faster when i shut off some programs but still not at full speed.it should run fast it has a intel celeron processor 2.66ghz,256 mb ram but it is rather slow.she didnt have any problems with it when she first got it about a year and a half ago.any help will be appreciated.

thank you
 

A:problems with compaq presario

9 more replies
Answer Match 56.7%

I have a Compaq Presario C74EM which I just installed Win 8 RP. The sound did not work.

Eventually I was able to find and install drivers - sound still didn't work, but after following the advice on a forum post, I put the computer to sleep, waited a few minutes, woke it up, and sound now works.

This computer came with Win Vista home. Supposedly the Compaq Win7 drivers will work with Win8. Compaq (hp) has utilities that will go through any/all drivers, and update to the latest.

Does anyone know how to get this going under Win 8?

More replies
Answer Match 56.7%

I have an older compaq presario 5000 (5wv260), i want to upgrade the memory in it. I know it takes sdram, 168 pin, but i dont know if i need parity or non-parity. OR ecc or non-ecc... anyone know what this computer takes?
thanks
 

A:compaq presario memory help..

6 more replies
Answer Match 56.7%

Hi All

I realise this is possibly not the right room for this, but here goes.

Compaq presario V5000 laptop started giving consistant BSOD on start up, no boot (even safemode possible)

*** STOP 0x000000c2 (0x00000043, 0xDFFE8000, 0x00000000, 0x00000000)

Ran linux did memory and hard drive check, seems ok. Have got all my data off and trying to recover the computer to a working state, but turns out the Compaq recovery DVDs i made invoke windows XP, this of course brings on the blue screen of im at the end of my tether.

Any suggestions, as I havn't got a scratch startable version of windows (as they don't give away them anymore.)


Thanks in advance.

A:Compaq presario recovery

Hi.
ok why can you use your restore cd to boot the the laptop with pressing F11 when booting the laptop,then follow the instruction.

N.B
i also have problem with mind i can not used it anymore because i have accident i lost my restore cd for compaq presario v5000.
can you please copy and send them via my e-mail,[email protected]
if you done mined.

1 more replies
Answer Match 56.7%

All of a sudden, my Compaq Presario, Windows XP, won't boot up past the black "COMPAQ" screen. None of the keyboard keys respond (we've tried three different keyboards). All the lights light up when we first turn on the computer, but then it just stops at the black screen with boot options, but none of the keys on the keyboard will do anything. Does anyone know what the problem might be?

A:Booting Up Compaq Presario

Have you tried booting into "Safe Mode" to see if its a software/driver issue?

4 more replies
Answer Match 56.7%

I'm trying to reformat my mom's old Compaq Presario SR1303WM. I've set it to boot from the cd-rom and I almost had it. But after deleting the partitions and starting a clean install it would only load the programs to 20%. After that it locked up and wouldn't do anything. I had to shut down and restart.

Now, it won't load from anything. Of course the old OS is gone so it won't start up on the hard drive and it won't boot from the cd. It just keeps going to a black screen with "Error Loading Operating System". Can someone please help me. I know they can't get a new computer and I just want to get a new install on this one to speed it up for them. They had a ton of malware and such on it.

Any help greatly appreciated.
 

A:Compaq Presario won't reformat

Since HP now owns Compaq, I am not sure what kind of cds you have in order to attempt recovery.
Per HP Support




HP computers that ship with Microsoft Windows XP do not come with recovery CDs. Instead, they use a hidden space (partition) on the hard drive to store the recovery information. The use of a separate partition provides a convenient process that eliminates the use of recovery discs that may be lost or scratched. A system recovery from the hard drive may not be possible in some circumstances. Your computer may contain Recovery Disc Creation software. Recovery discs for Windows XP are available from HP for a minimal cost. See Obtaining Recovery Discs for ordering information.Click to expand...

What kind of disk are you using to attempt restore, and are you using HP's support page?
Are you still set to boot from CD and to attempt to do so FIRST?
Is your BIOS properly identifying your hard drive?
What happens if you unplug the data cable from the hd before trying to boot to cd?
Do you have the "Recovery Console" option at some point during boot?
 

4 more replies
Answer Match 56.7%

I really don't know that much about computer but i have a compaq presario v6000 and i just brought a new hard disk drive ST9100824AS and i trying to put on windows 7 and its saying no IDE found when i run diagnosis test. When i go to run the windows 7 disk i get to the installing screen and its doesn't find hdd. I need some help. Thanks

-MaxG

More replies
Answer Match 56.7%

I am not near this machine, it's 60 miles away, so I can't look myself, but can anyone tell me if this is one of those pieces of junk that has the BIOS on the Hard Drive, or is it on the Mobo (like normal) ?

The person wants me to rebuild it, and I have never rebuilt a PC that has the BIOS on the HD.

What do I need to watch out for ?

What I usually do is FDISK the HD and then Format it, and go from there.........

Compaq Presario 7470
 

A:Compaq Presario 7470

I believe its a normal setup. However, even if its not the compaq partition is hidden. It is either completely invisible to FDISK or its listed under Non-DOS partitions in FDISK. As long as you don't touch that you'll be just fine.
 

2 more replies
Answer Match 56.7%

Compaq Presario 3000+ AMD Sempron processor
Windows XP SP3
1 gig PC2700 memory
80 gig IDE HD
430 watt OS
Video and sound add in cards

On power-on the power light comes on, and the fans run, monitor is black.
 

A:Compaq Presario - no boot

16 more replies
Answer Match 56.7%

Hey everyone I am having the same problem again as I was having before with my Compaq Presario 5000. It seems to just freeze up when I am on it or not. Sometimes I try to move the mouse to get back into Windows from the screen saver and it does nothing. At all! And sometimes in the middle of surfing the web and listening to music it just freezes up again and I have to hit the power button just to get it back up and running. Can anyone help out with this? I was asked to run MemTest before but I have no idea how to do this, so could someone help out? Also, since I am not a complete newbie, but darn close when it comes to the whole hardware side of computing, how can I tell what is causing interference with what when it comes to the hardware I am running and wether or not the latest drivers are installed? Thanks again and hope to get this resolved quickly.

Compaq Presario 5000
UWAVE Motherboard
832MB RAM
AMD Athlon 901Mhz
eVga GeForce2 mx 400 64MB PCI
Sound Blaster Audigy 2 ZS Platinum
Sony DRU-530 DVD +-Drive
Windows XP Home SP1
 

A:Compaq Presario Freezing up again!

13 more replies
Answer Match 56.7%

My brother recently bought a new HP desktop PC so he wants to sell his old laptop (Compaq Presario 700, Windows XP Home Edition) and we both agreed we should do a full restore to completely wipe the hard drive clean to it's original slate and we have the original Compaq ''QuickRestore'' discs and for whatever reason, they're not working. There is three CD's and not a single scratch or mark on any of them. I've tried to run all three on the laptop and the only thing that happens is that the folder containing the discs files on it is what pops up and no actual setup occurs like it says on the little piece of paper that comes with the CD's.

This is what it says....

First, if your Presario Notebook is attached to a Port Replicator (QuikDock), you must turn the power to the computer off, disconnect it from the QuikDock, and plug it into an external power socket. Disconnect any printer cables or other peripherals from the computer before using Quick Restore.
1. Insert the Quick Restore CD (bootable disk) in the CD drive, and press Enter. A WARNING message appears advising that you are attempting to totally reformat your hard drive. Confirm by following the next step.
2. Press 1 and then Enter to continue. The Power Quest Quick Restore Wizard starts copying and uncompressing data to the local hard drive. This process takes approximately 7-10 minutes.

This warning message never appears and none of this ever happens. Does anyone know why... Read more

A:Compaq Presario 700 (Windows XP)

Is there an autorun.exe? Setup.exe? Any executable at all on the root of the disk?
 

1 more replies
Answer Match 56.7%

I have this old Compaq and I used to be able to burn CD's until the day I stuck in my little portable device one would use to store pictures and things..I forget what its called,but you can insert it into a USB port then add or remove pics or anything and remove it and put it back around your neck and go. Anyway after doing this one day I go to burn a Cd and my computer is telling me I have these new drives called E,F,G, & H, which it has now bundled into something called a USB mass storage device. it no longer recognizes that i have a working burner.. it does not even recognize that I have a drive D. All it is reading is those removable device drives that came along with my junk drive. The 'Safely Remove Hardware" option has been coming up and ive used it to disable these other drives..but its still not working..How can I fix this?

A:compaq presario SR1103WM

Right-Click on My Computer, select Manage. In the left pane there should be a listing for Disk Management - click that.

Now, in the right pane, scroll down and see if your CD is listed, but has no drive letter. If so, right click on the grey part and choose "assign letter". I would use Z: (no chance of a USB device trying to grab that letter).

3 more replies
Answer Match 56.7%

Hello Everyone,

I am running Windows XP Pro on a HP Compaq Presario S3190UK desktop and since this evening I haven't been able to even get to the Windows Splash screen.

When I boot I am given the options of Safe Mode, Last Known Good Configuration, Start Windows Normally and Recovery Mode (which doesn't respond). Whichever option I select it stalls and will not boot the files and when I boot in safe mode it stalls after about seven seconds.

I have the Operating CD which I have tried to boot from but upon boot up I get the message "Please insert the Restore Plus! CD" . I don't have this.

Is there any chance of me retrieving my data?

Thanks for your help in advance.
 

A:Restore Plus! CD for HP Compaq Presario

16 more replies
Answer Match 56.7%

Hello-have prev worked with Compaq tech support 3 sessions but still have same problem with video. Until recently, I could watch MSNBC video OK. Have never been able to watch CNN video. No new software has been added to computer recently. Now, when I click to see video on MSNBC, it acts like it's going to open, then get x in corner and says done in taskbar. Then screen comes up telling me to install free software and a link to windows media player 10. I do this, it loads as it should, and I try to install as normal. At end of installation, it gives me error message from Windows Media Technologies. It says"this version of WMT is incompatible with this version of windows. For more info view the info at the Microsoft website". Have tried this several times. Have gone thru several scenarios with compaq and tried many different remedies. Have tried to uninstall all WMP entirely and reinstall. Many restarts. Disc popup blocker, antivirus, firwall, defrag, run programs that compaq had me try. Same prob now. Have the 8 system recovery disc's from compaq if all else fails but don't want to do that if it can be corrected any other way.
 

More replies
Answer Match 56.7%

Hi Everyone, I am new to this site and really need your help. I have a compaq presario desktop sr1725an and I need to run a complete recovery on the system. I have tried everything the hp site tells me, but so far nothing works. I really need recovery discs for this computer, it currently has xp loaded. Does anyone know where I can download recovery disks for this computer, I want to restore it to its factory settings.

Please, any help would be great.

Thanks!
 

A:Compaq presario sr1725an

7 more replies
Answer Match 56.7%

Hello all,

My 92-year-old grandfather -- who lives on a little island off the coast of Maine -- has emailed me regarding a problem that he is having with his ten-year old computer. If anyone out there would be kind enough to offer some advice on how to fix it, it would be greatly appreciated. There are no computer shops on the island, but my grandfather has plenty of tools and has worked extensively with radios throughout his life, so with some direction I have little doubt that he can make the repair.

This is an unconventional post, to be sure, and I don't really know anything about his computer ... but I think he has done a reasonable job describing the issue:

Hi Chris!
I have a severe computer trouble that I brought on myself.
First I will describe the computer and it's programs.
It is a Compaq, Presario 1200,
at least 10 yrs old.
Along the front edge of the top it has three indicator lights at the
left of center and three on the right.

The ones on the left are operating lights of which one shows when
the charger is in and the left most one shows when the computer is
started up by the button which is in front of the screen.
The one between these two shows the operating conditions, I believe,
as it usually flickers in concert with whatever is going on.
The three on the right each has a "locked padlock" symbol.
For programs it has Windows 98, Juno V.4, Intel Create and Share
and some other good things.
Everything has been working good.
I do... Read more

A:Compaq Presario Issue

What a sweet letter from "Grumpy Gramp"! Has he tried to plug in to another outlet completely? I would take the battery out completely and try this.

fyi: http://en.wikipedia.org/wiki/Compaq_Presario_1200
 

1 more replies
Answer Match 56.7%

Related to the problem that I posted about here: http://www.techspot.com/vb/topic141683.html, this is a little more urgent. The Compaq will frequently, sometimes regularly lock up: screen freezes, neither mousepad nor keyboard respond, and the harddisk parks the heads. Lately, it locks up when it's on the charger, and then is fine (at least, so it seems) when on battery-power. It's also sensitive to being touched--not bumped, it's that unpredictable. Sometimes, I can move it around without problem, other times, if I even touch it, it freezes.

The fans still run like normal, so I don't think that it's overheating. I'm afraid it's a motherboard issue, which I wouldn't be surprised at, considering that it's about 6 years old.

Any suggestions would be much appreciated.
 

More replies
Answer Match 56.7%

hi,

Iam siva.I need all the drivers of compaq presario c770us because some of the drivers are not functioning properly it has become a serious problem for me for many days.I will be vey grateful if you suggest me a positive reply.Thank you.
 

A:compaq presario drivers

10 more replies
Answer Match 56.7%

I have a Compaq Presario, Authentic AMD K-6 3D Processor.
In order to run DirectX 8.1 for my 5 year old to play his new TONKA games, I need to upgrade the video card. I have looked on the TRIDENT website (with no success) and was wondering if anyone has a newer version than I have. This is what I have:

Trident Blade 3D/MVP4 (63)
Trident Microsystems
Chip type: Blade 3D/MVP4
main driver trid_p3d.drv
v. 4.12.01.2214
Mini VDD: trident.vxd
VDD: *vdd, *vflatd
 

A:Compaq Presario 7360

6 more replies
Answer Match 56.7%

i have a compaq presario 3630AS desktop. It came with quick restore CDs and a recovery CD. If i have to re-install win xp should i use quick restore CD or the other ????? Pls help

A:compaq presario 3630AS

Compaq Recovery CD options
The Compaq Recovery CD enables you to restore your system files from a separate partition on your hard drive. The four options on the Recovery CD are listed below.

Restore option Description
Emergency Diskette Creating this diskette is important as it allows you to save your computer's unique setup information for use in the event of an emergency. Store the diskette in a safe place.

User Backup Backs up all information and files on your hard drive and stores them in a separate partition on your drive.
User Restore Restores your hard drive to the state it was in when you last used User Backup.

Factory Restore Restores your computer to its original factory-installed software state.

1 more replies
Answer Match 56.7%

the DVD drive stopped working and now the hard drive has errors.

I got an external USB DVD drive on it, but chkdsk cannot seem to repair the hard drive.

Anyone got any idea how to fix it or recover data off of the hard drive. I got a year's worth of work on it, and none of my files show up. Just "File record segment XXXXX is unreadable" errors about a million of them.
 

A:Compaq Presario 2500

Suggest you stop using the drive until you can recover the data.
It is likely that drive has failed or is going into total failure.
You can purchase a replacement drive for $42 to $75 depending on size and whether you get the 5400 rpm or the 7200 rpm in a 40, 60, or 80 GB model.
You can obtain an adapter to put the drive into a desktop unit as a slave. The adapter converts the mobile 2.5" hard drive by adapting the pin set for the desktop EIDE cable. Adapters are available many places, including www.geeks.com, www.cyberguys.com, www.frys.com, www.outpost.com, and others... cheaply at $2.45 to $9.99 depending on where you get one.
Then you can usually drag and drop the data from the mobile drive to a desktop drive, or use drive recovery software, then you can burn a CD to then migrate it to your new drive... or just use a USB transfer.
( We work on a great number of the Presario 2500's with identical problems. Did you know there are 434 different models of the Presario 2500 series of laptops?)
With the new drive, you just use the recovery set that came with your laptop, or buy the set for about $30, including shipping, from the Compaq parts department.
But you likely will not ever be able to use that drive again. Thus, you do not want to stress it further by more restart or rescue attempts.
 

4 more replies
Answer Match 56.7%

We have a very old Presario 4550, connected to an old cathode tube display and we also can't find a functional printer with old fashioned connectors. There are two USB ports on the back of the tower - could we connect a more modern display and printer to this tower using the USB ports?

More replies
Answer Match 56.7%

This is an older system. What manipulation of the case needs to be done to add / remove the hard drives?
 

A:Compaq Presario HD Installation

8 more replies
Answer Match 56.7%

Hello, i have a compaq presario desktop. here are the specs:
512 mb ram
Windows vista
10 gb hard drive
amd athalon xp2 prossesor.

My problem is that is so slow.
 

A:compaq presario 6000

7 more replies
Answer Match 56.7%
Answer Match 56.7%

I have an old compa presario 1277 who supposedly had something called a monkey virus on it. This virus supposedly wipped out all the drivers. Someone reistalled them. However, my husband insist the monitor display does not look like it did and that it use to play movies. Do you have any suggestions?
 

A:Compaq Presario 1277

Is it this Presario 1277 notebook: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=95012& ?

If so try reinstalling the Trident Display Driver from the available downloads.
 

1 more replies
Answer Match 56.7%

A mate of mine has just bought himself a Compaq Presario and asked me to give him a hand at getting it up & running so I said I would, (really a classic case of the blind leading the blind). We did get the thing going & connected to ISP so miracles do happen. What I would like to know more about is the partitioned HD that it has. Am I right in thinking it is a backup of some sort.
 

A:Compaq Presario HD Partition

8 more replies
Answer Match 56.7%

computer will not charge only when it wants to. will not start up the power charge and wireless lights come on and the hdd light does not. black screen and the fan does work. computer was shut down and charged over night the next day it would not start up and screen is black.

A:compaq presario cq60

Without the battery installed and the power adapter plugged in, press and hold down the power button for 10 seconds. Plug in the adapter leave the battery out, does the laptop power up?

Do you get any repeated beeps? Does any fans spin or can you hear any fans running?

2 more replies
Answer Match 56.7%

I was wondering how people thought of the Compaq Presario laptops as i am thinking of purchasing
 

More replies
Answer Match 56.7%

My laptop wants an administrator password that I don't know. Shows a system disabled code of 91550023. What do I do?

More replies
Answer Match 56.7%

Just throwing this out in case someone can help

I have a Compaq Presario 5461 and when the hard drive crashed I got a new hard drive off ebay (same model the pc came with). When I try to use the compaq restore disk, i get an error that pretty much says restore can't be run on that machine. I realize that these restore disks are somehow keyed to the machine so you can't use them on another machine, but all the hardware is the same except for a little more memory. Only thing I can think of is a bios update that I applied. Did that alter the "signature" of the PC. If so, would it work if I backed of the bios update?

At this point the pc is just a toy, i'm using it to learn more about hardware, etc. I was able to install windows and just used my license key that came with the computer, so thats not an issue. But it bugs me that I can't get this restore to work. I did also notice that PC does not have an asset tag - wondering if the bios update zapped that.

Other notes - there was no extra partition that I know of on the orig hard drive, and there is only one restore CD (no diskette). I was able to do a restore of the pc several years ago
so I am pretty sure the disk is not defective.

Any help or thoughts would be appreciated
 

A:Compaq presario restore

a different hard drive than the one the pc came with shouldn't alter the restore process.
What error is it giving you?
 

4 more replies
Answer Match 56.7%

Recently took some hits on my Compaq Presario 7478 system. Got two or three nasties via the 'Net. After McAfee's virus scan and removal, began experiencing weird happenings, such as system closing down and restarting. Then just not starting. Tried a few remedies [probably inadvisedly], and finally the system seemed to hang on my restore at the same place repeatedly.
Ultimately the system could no longer establish my OS. Restore failed.
Bottom line: Could not invoke computer restore. Could do nothing with this computer.
Q... Being compaq is the BIOS set to a certain condition that would prevent my reformatting the hard drive and restablishing an OS? Is this an option I can override? If I were to piggy-back the existing hard drive onto an operating hard-drive and reformat would that solve this problem and permit me to then create or repair the hard drive subsequently to get my compaq back?
Sorry this is so wordy...
 

A:Compaq Presario dead

Have you tried disabling System Restore; then re-enable for a fresh start?

Failing that, format and install OS per instructions in your manual or the CD which came with your computer. If no CD, the OS should be installed in .cab files in Windows Explorer.

The BIOS should already be properly set
 

3 more replies
Answer Match 56.7%

Installed with Vista Premium, i've realised that it has a Recovery Partition and im not sure how to use it. my computer came with a windows vista disc, but im trying to recover Vista and im not sure how to do it. maybe someone can give me a heads up on how to do it.
 

More replies
Answer Match 56.7%

Hi

After unsucessfully trying to get rid of some nasty Malware (Antivirus XP Pro 2009 to be precise) I'm currently trying to perform a factory reset on my Compaq Presario SR1909uk which had Windows XP.

I'm performing this from the recovery discs I created when I bought the PC.
However, I keep getting various error messages saying either

'Cannot copy file C:\1386\APPS\APPS15417\src\VIRUSCAN7.DAT or

C:\1386\APPS\APPS15417\src\Setup\asCore\Antispam\btevclid.dll\MANIFEST\asnmobj.spm

I keep aborting when I get these messages and the progress perecetage remains. If I do this until I reach 100% do you think it will work?

Other than buying some new recovey discs from Compaq or taking it to be fixed, are there any alternatives please?

Thanks

A:Compaq Presario SR1909uk with XP

Try cleaning your Recovery disc.

3 more replies
Answer Match 56.7%

Hello:
I'm making some changes to a compaq presario 4660 (dinosaur) and it's running windows 98. I cannot get into bios. F2, F1, delete and Tab do not get me in. I searched on google and really didn't receive good results. Well it did say that F2 would get me in, but it does not. Seemed to me there was another way to get into bios?
 

A:compaq presario 4660

16 more replies
Answer Match 56.7%

Hello;

I have had a Compaq Presario 1500 laptop for about 2 years now, and I am quite un-satisfied when it comes to multi-tasking several applications at the same time. Sometimes it is so slow that I cannot minimize a full-screen application to read up on something on the net. I currently only have 256 megs of ram, but I read on the internet that tihs model could have up to 1 gigabyte. This is great, but therein lies my question. The laptop has two ram slots, one of which has been empty since i got the computer. Could I get a gig of ram and still keep the 256y meg stick as an added boost? or is the 1 gig the maximum for both slots?
 

A:Compaq Presario RAM upgrade

Well if your laptop supports a maximum of 1gb then that means 512mb per RAM slot.
Here are a few links on Newegg which is the Maximum Memory you could get for your Laptop. This is if you are in USA
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145482
http://www.newegg.com/Product/Product.aspx?Item=N82E16820134037
http://www.newegg.com/Product/Product.aspx?Item=N82E16820172102
 

8 more replies
Answer Match 56.7%

Right heres a very specific enquiry...

I have a Compaq Presario SR2125UK

Im looking to upgrade the graphics to a BFG 8800 GTS OC 320MB or the 640mb.

First question is can my processor handle it? (Intel Pentium D 915)

I know i have to upgrade the ram so im purchasing 4GB of DDR2 RAM for about £50 and im replacing the PSU probably with an OCZ Stealth 600W PSU. Do that sound viable? Ive only got 32bit windows so i know im loosing out on some ram but its a package deal lol.

I have tried reading into all the requirements for these upgrades such as power connectors from PSU to graphics card and motherboard and think i got a bit lost.

The BFG requires 12v of something which the OCZ provides along with more than enough power (425w required for BFG), plus both the motherboard and the PSU are PCI express compatible. And i have an extra slot to accommodate the doubledecked size of the BFG.

In terms of the required power connectors i was a bit lost. The OCZ said it has a 6/8 PCI express pin which is what the BFG requires but can somebody shed some light on this?

But im really just concerned that it was going to fit and work!

These purchases come to around about £150 so dont want to be thinking for another 100 squid i could have just bought a XBox 360! lol

Basically Im asking advise on the above upgrade decisions and any tips anyone has on installing these?

Any help would be appreciated, im sick of only being able to run pre-2005 games on a pc bought in 2007! I was pretty suc... Read more

A:Upgrading my Compaq Presario

16 more replies
Answer Match 56.7%

My landlady's Compaq Presario SR1103WM is acting up and I'm pretty certain it is the PSU going out because the symptoms are the same as my PC had when it's PSU went belly up on me. It starts booting up fine until Windows XP Home starts loading, than it resets. I used a WinXP disk to repair the boot files and MBR with no effect, so we decided to reinstall Windows (been needing to do that anyway). Before doing that though, I was going to try recovering pictures of her grandkids by using a Linux Live CD, and ran into the same problem with it, so that eliminated Windows problems.

To the best of my knowledge, that leaves the PSU (likely) or the memory (possible) as the probable causes. I running Memtest86+ on it tonight to eliminate that cause.

Please correct me if I'm wrong in my diagnosis or if I am missing anything, but if I'm right about the PSU, that brings me to my main problem. I have heard that many Compaq models have proprietary PSUs so that you can't use off-the-shelf parts to replace them and have to buy one from them at a higher price. Is that the case with this model or can I order one from Newegg? I looked up the PC on Compaq's web site, and it didn't even say what PSU it has.

Thank you in advance.
 

A:Compaq Presario SR1103WM PSU

Memtest86+ has compleated 34 cycles with zero errors. Looks like it is the PSU.
 

1 more replies
Answer Match 56.7%

hi,
I have a compaq Persario M2000. The other day, I was using the touch pad to move and it just shut off. I tried to turn it back on and nothing happens. When I look at the AC adaprter led it is not turned on and it is plugged in. I removed the battery and tried the same with no luck. the ac adapter led is still not light up. The battery is fully charged, and when i try just that nothing happens. I opened it up and removed the bios battery and checked the chips and circuits. nothing seems out of place ot burnt. I used a multi meter to check the power button and it is getting power, as well as the curcuits in the ac adapter
can someone help me or give me some ideas what my nxt step is?
thanks
 

A:Compaq Presario Will not turn on

I had similar problems with compaq laptops - it's the power supply in your laptop - the repair for that is about $300+

check your warranty before doing anything else...
 

2 more replies
Answer Match 56.7%

I need to replace fried motherboard in this. I know it has 2.5ghz Intel Celeron processor. It also needs a new Hard Drive. The RAM is pc2700 ddr. Any suggestions on purchases?
 

A:Compaq Presario S4100NX

Need more info,

What socket is the CPU?

What is you power supply connection? 20 or 24 pin?
 

3 more replies
Answer Match 56.7%

hi,

i have one compaq c500,it's some keys are not working.i have to open it,i tried to open but can't , any one can help me.
 

A:compaq presario C500

Hiya and welcome to Tech Support Guy

I've removed your email address, as we reply to the forum, and putting it up may give you spam.

Can you explain a bit more on what you're trying to do? You say open it, do you mean log on?

Regards

eddie
 

1 more replies
Answer Match 56.7%

hey I have one of these and was wondering how high i can raise the processer speed i preveosly thought i could bring its 566mhz to a 1.1ghz but that was risking it just wondering i just might update it since the price has gone down
 

A:compaq presario 7594

NOPE, can't upgrade that dog to anything that would make a difference. Your manual or their web site should show you the upgrade path and what you can go to.
 

1 more replies
Answer Match 56.7%

Hey all,
Does anybody know if all of the motherboards in the Presario V6000 laptop series are the same size and shape?

More specifically, does anybody know if a V6000 motherboard would fit in a V6310 case?

If you need more info, let me know.

Thanks!
 

More replies
Answer Match 56.7%

Ive been wanting to get my old computer running for awhile. i took it in, to get checked, and the guy said that the hard drive was blown. He told me that i had to get the full quick restore disc set if i wanted to put a new hard drive in to get it working(he said it consisted of 2 discs, he explainted to me why but it went in 1 ear and out the other). Well i called and told them that i need a full quick restore disc set for the model number 5170. I got it in the mail today but there is only 1 disc . Is there really 2 quick restore discs or did that guy have no idea what he was talking about? Also can i just use the 1 quick restor disc to put in a new hard drive and get my comp running again?
 

A:compaq presario quickrestore cd

8 more replies
Answer Match 56.7%

hello my laptop started melting charger tips from my sister used an universal charger since it wuz hers then. I checked the universal charger specs and it was not compatible with computer.The charger for my laptop is working perfectly bt when ever charging the tip gets extremely hot untill it starts to melt. I have recently changed the charging port on the motherboard but the laptop is still heating the charger tip. The system is compaq presario v2000 currently running on xp pro. i dnt want to purchase a new motherboard any suggestions on what needs to be changed.
 

More replies
Answer Match 56.7%

i just did a fresh install on this compaq laptop w/ win2k pro and i lost several of the add on thingys that compaq added to the laptop.

ie. the volume and scroll options on the keyboard. i went to the compaq site and haven't found the documentation on what the name of the programs or drivers are called for these 2 options.

any help would be nice.
thanks
 

A:Compaq presario 1694 w/ 2k pro

You should have gotten a Restore CD with your laptop. That is the OS and all specific drivers, apps and Compaq features that were on the system. Anytime you install a "fresh" OS, you will lose all that stuff. With Compaq, I think this is not all bad. If you bought the laptop with something other that Win2K, then you are most likely SOL and on your own.
 

1 more replies
Answer Match 56.7%

Here we go again, guess I am good at getting stuck on stupid, we bought five of these HP 'debranded' machines. I have a M2NBP-VM CSM mobo. I have almost everything working except the audio. Two errors in device manager PCI device and unknown device. I am suspecting that it has to do with audio since I can't get any audio going period. Yepper done the aau high def audio driver thing, chatted with HP support etc etc ran driver issues into the ground. I am using xp pro sp3, I know these things shipped with MCE and they say there vista ready.....hmmm but no xp drivers. So any of ya'all got some advice? thanx
 

More replies
Answer Match 56.7%

I have a Compaq Presario 2700T with problems. When I press the start switch it runs for about five seconds and then shuts off. It doesn't even run long enough to give me any screen image. It does this on every attempt to start the computer now. Prior to that it flashed a blue screen on a previous start attempt but not long enough to read what it said.
Any ideas what is going on?
 

A:Compaq Presario 2700T

I took the keypad off and found the heatsink and fan loose from the motherboard. The four soldered nuts that the heatsink and fan mounting plate screw onto are broken off from the motherboard. I am not sure if this is what is causing the problem but it's not good. I tried to start the computer while holding pressure on the loose mounting plate but it did not make any difference.
 

1 more replies
Answer Match 56.7%

My Compaq M2000 Presario fan will not work. I have even bought a new fan and it still does not work. Is there a thermal switch on the motherboard that i could use to turn on the fan. Help is much apreciated.
 

A:Compaq M2000 Presario Fan Help

6 more replies
Answer Match 56.7%

I hit the power button this morning and nothing happened. Tried unplugging and holding power button in and still nothing.
 

A:compaq presario will not turn on

Please post your system specs, exact model Presario, include any upgrades or modifications please.
 

1 more replies
Answer Match 56.7%

I bought a presario 1500 that I had assumed had a problem with green lines that were on the lcd and external monitor. The lady who owned it had taken it apart and sold it to me that way. I bought it today and tested it when I got home. I powered it on and I saw that the fan will move slightly but won't start and the hard drive will start but shuts down after about 5-10 seconds. The power light always stays on but nothing else. I noticed when I unplug the hard drive and battery inverter board(see link) it will shut off the power light. Could that be the problem? I don't see how the motherboard could break when it was never used. Anyone have some advise?

http://cgi.ebay.com/COMPAQ-PRESARIO...ameZWDVWQQrdZ1QQcmdZViewItem#ebayphotohosting
 

A:Compaq presario won't turn on

This looks like a power supply controller card issue. Also some systems will not run if the CPU fan is not working. You need the battery inverter board in place to power the system and light the light.
 

23 more replies
Answer Match 56.7%

Hi this is my first post so bare with me.

I have a compaq presario 2580us laptop first of all with a pentium 4 in it.

My question is this. My laptop has 3 fans in it and they all used to come on in the past. Only one(the biggest) has been working not sure how long it has just been the one either. My temps get up to around 127F. I am just just wondering if there is a way to check out why the other 2 fans are not working. If there is some setting that I could check that would be great. Any assistance would be so nice.

Thank you,

Jackie
 

A:Compaq Presario Fans

I did this on a machine at work 2 weeks ago. Check hp.com, do the auto detect thing, and update the bios. should solve the problem.

hope it helps.
 

9 more replies
Answer Match 56.7%

If any here has an HP Pavilion or Compaq Presario PC or Notebook (current models), they will notice that the fan kicks in when needed. The fan doesn't really annoy me as much on my Compaq laptop, but on my HP desktop it is really annoying and loud. I think it forgot that it was only supposed to come on when needed because it is now on almost all the time. Can someone explain to me how this fan works in more detail and how I can possibly adjust when it comes on or at least the fan speed, SOMETHING!!! Thanx in advance.
 

A:HP/Compaq Pavilion/Presario Fan

If the fan kicks in more then it used to it might mean that the computer needs a cleaning. These fans are temperature controlled and only kick in when a sensor detects the temperature to be at a certain level. Sone fans need to be on at all times - like the one on the CPU - but it may be possible to control it speed with software or BIOS settings.

Speedfan comes to mind, do a google search for it. It will list the motherboard temps and allow fan speed adjustment if the board supports it. If you have a case fan you can control its speed, as for the CPU fan - thats best left on a full speed.

First, open up the case and see if it needs a cleaning. You can also replace stock fans with quieter ones if they are too loud or wearing out.
 

2 more replies
Answer Match 56.7%

I have the best luck with computers ever. My brother wanted me to format his oldschool compaq presario 5000 computer so I formatted with the win XP setup disk, when I went to restart to start installing windows after the format it takes me to a blank screen that reads:
"Couldn't open drive multi(0)disk(0)rdisk(0)partition(1) NTLDR: couldn't open drive multi(0)disk(0)rdisk(0)partition(1)"

I have booted with floppy and fdisk, fdisk /mbr, formatted about a million times using FAT and NTFS file systems, I have deleted all partitions, did everythinig I can think of.

Does anyone have any idea of how I might solve this and install windows? I know the HDD isn't shot because I can put it in my other comp and actually do a full win install, but when I place it back in the compaq, it brings me to the same error screen.

Any help would be greatly appreciated. Thanks guys.

one more thing, I am kinda a n00b at this sorta stuff so any ideas please give me the *hold my hand* explination and guide me what to do with step by step instructions, thanks again guys!

A:Compaq Presario problems PLZ HELP!

Check in your BIOS and make sure you have the right HDD displayed. It would be best to set it to auto. Also you could try setting the BIOS back to the default values.

3 more replies
Answer Match 56.7%

Hi, i'm having a problem turning on my laptop. I'm using a Compaq Presario C502US. I've been using the AC adapter that came with the laptop but eventually the AC adapter became loose and broke. The charging icon (lightning symbol) wouldn't turn on anymore and I think the laptop has now run out of power. I've finally received a new adapter and when i plug it in the charging icon lights up. However the laptop still won't turn on. I've waited for about 2 hours but it still won't turn on. When i click the power button, the Power turns on and then it blinks. The Fan turns on for about 3 seconds but then it goes off and the power light blinks and the monitor won't turn on. Can anyone help me with this problem?
 

A:Compaq Presario won't turn on

Remove battery and power adaptor (ie all power out)

Hold down the ON button (to disperse all internal power)
Plug the power adaptor back in only (and to wall socket!)
Turn on!

If it works, turn back off, and re-install battery, turn On
 

5 more replies
Answer Match 56.7%

got a mates comp to try to fix(presario sr1055cl)
when it starts up it defaults to a start windows normally black screen with three commands above like start in safe mode etc

if left it keeps rebooting to this page
if i press enter it goes to compaq sign and looks like it gonna work but then goes back to same screen

i can get into the bios and can do a system recovery but it just puts me to a plain light blue screen and nothing happens

please help
 

A:compaq presario won't start

7 more replies
Answer Match 56.7%

I just bought and set up a new computer system, and am now trying to get my old one to boot, so that I can migrate the files needed for the new system. The monitor doesn't come on, and all I'm getting is a fast blinking green light on the tower. I've un/replugged all cables and power cords, and I know the monitor is OK because it belongs to my husband's matching computer, but my old one won't boot.

Help!!!
 

A:Compaq Presario won't boot!

I'm desperate, guys! Is there any other information I can give you to help resolve my problem? I have the Easy Transfer Cable for Vista all ready to go (and the software loaded in the old computer before I disconnected it and moved it to the card table), but I can't get my Compaq to boot.

If you can't help me, I guess I'll take it to Best Buy tomorrow and let the Geek Squad have at it...
 

3 more replies
Answer Match 56.7%

My parents bought a Compaq Presario laptop a few months ago and ever since we got it, it's been extremely slow. It's got Windows XP on it and after we click on whichever name we want to log on as, it literally can take up to about 7 minutes {if not longer} until it actually loads the desktop and everything. That's right, I kept track of time. Then, if we want to get on the internet {we have roadrunner} it takes even more time. I usually just sit there and watch a T.V. show while I wait for the home website to finally pop up.

I've tried a couple of things that I do to my own computer to make it faster, like going to msconfig and making sure the Startup List is unchecked. I also deleted those unnecessary things under IE-Tools-Internet Options like temporary internet files, cookies, history, etc. That makes my computer work better but when I try it on the laptop, it doesn't do a thing. It's still the exact same slow speed. I do have a Windows 2000 on my own computer and I've never worked with XP before so I don't know if there's a big difference there or what.

If anyone has had this problem or has any ideas on how to speed it up, that would be super!
Thank you!
 

A:very slow compaq presario

14 more replies
Answer Match 56.7%

I have a Compaq Presario 2700T with problems. When I press the start switch it runs for about five seconds and then shuts off. It doesn't even run long enough to give me any screen image. It does this on every attempt to start the computer now. Prior to that it flashed a blue screen on a previous start attempt but not long enough to read what it said.
Any ideas what is going on?
 

A:Compaq Presario 2700T

Does this happen when the power connector is attached?

Are there any lights on when the power connector is attached? For example, does the battery charge?

Do not be rough with the cable, but the power plug that connects to the laptop, does it make any difference if you gently bend the cable around or move the connector in the socket? (Occasionally over time either the cable becomes damaged or the socket becomes loose)
 

2 more replies
Answer Match 56.7%

Original 500GB HDD was showing signs of eminent failure.I successfully cloned the drive to a new 400GB HDD, using NORTON GHOST.(I know this drive is smaller than the original, but less than 30GB was being used on the original)Anyway, The new drive would not boot.Assuming that the problem may be OS license-related, I ordered the Compaq Recovery Discs Set.While waiting for the Recovery Disc Set to arrive, I purchased a Sandisk 120GB SSD.(Again, I know that the 120GB SSD is smaller than the original 500GB HDD that came with the computer, but I do not plan to even fill it 50%.)Anyway, The Recovery Disc Set arrived and I attemted to use it on the new Sandisk 120GB SSD.The process seemed to go fine, all 3 discs of the set seemed to copy, and then the computer restarts and a screen displaying files flying across the screen from one folder to another stays there forever.I waited 15 hours and came back and I still just see:Files flying across the screen, from one folder to another folder.The drive activity light is blinking, but obviously there is a problem. Some possible related facts/information:The SSD is detected in the BIOS.The SSD Checks good, by the BIOS Diagnostics "Smart" Tests.I cannot find anywhere in the BIOS to disable AHCI, it only shows SATA or IDE.Current Bios version is 5.5.5, and I have been unable to find a BIOS Update anywhere.Current Memory (RAM) is 4GB (2x2GB), which was an upgrade since the machine was originally purchased. Can someone p... Read more

A:Compaq Presario SSD Upgrade

Greetings, I use Paragon Professional Disk Imaging software. Try Macrium Reflect free. Disk cloning is also included in the free version. Cheers!

1 more replies
Answer Match 56.7%

presario 1270, win se (non compaq) os, lcd went dim over 2 weeks and then dark while i was still running compaq 98 os. works well on external crt and current os. lcd is working but too dark to use. suspect inverter? or some other problem with backlighting. any suggestions to diagnose or repair would be appreciated. D.Rees
 

A:compaq presario mod #1456vqlin lcd

Backlight is out no doubt, screen look fine with flash light held up to it? Not much you can do for that, doubtful you can replace that unless you are pretty seriously technical.
 

1 more replies
Answer Match 56.7%

I was trying to upgrade my brother's Compaq 5340 from Windows 98 to XP. I kept giving me errors on the C: drive but would continue to work in Win98. I moved the valuable files onto another drive and formated C:

Now I cannot install anything on drive C: . None of my Windows installationd discs with work with it.

It keeps saying that there is a compressed file or directory on the drive or that it is write protected.

I booted of A: drive with a Win98 startup disc but cannot access C: drive.

What Is going on? Did I screw something up?
 

A:Compaq Presario 5340

Boot off a floppy disk and FDISK the drive - remove all the partitions and then create a new Active/Primary partition. Also make sure that Antivirus/Bootector protection is off in the BIOS. Then boot off the XP cd and format the drive and do the install. To boot off the CD you need to set thej boot order to CD-ROM, A, HDD in the bios. You can also delete the partition from the XP cd if you boot off it.
 

2 more replies
Answer Match 56.7%

I am upgrading a Compaq Presario 5000 model #5WB220 with a very low 15 GB hard drive for a friend. It currently has Windows ME and there is no Compaq Restore CD.

I have increased the memory to 320 by adding an additional 256 MB RAM.

I am wanting to totally replace the 15GB hard drive with an 80 GB hard drive and load Windows XP Home.

The problem I am finding out is that Compaq has propriertory info on a partition within the existing drive. From what I understand without the Restore CD, I can't put the new drive in.

I'm wondering if there are any other alternatives to doing this.

Can I install XP on the existing drive and then transfer all the data (to include the compaq proprietory info) to the new drive in a slave position?
 

A:Upgrade Compaq Presario

10 more replies
Answer Match 56.7%

will not boot to windows- tried to reinstall xp will not boot to xp cd-continually goes back to screen saying last known config, boot normally or safe mode help please
 

A:compaq presario keeps rebooting in xp

7 more replies
Answer Match 56.7%

My compaq was working fine until one day it just went off during a user session. Pushing the power button made it try to start but when it began to load windows 98 it quit again. After serveral retries it finally started up again. It ran OK for about one week , then just went off again. This was during a user session.(user session meaning it was in use at the time). I tried to restart it but it would not restart. Finally it tried to start, then said press F2, then the video went out. Nosthing shows up on the screen now. When powered on you can hear the hard drive start up but that's about it. The three year warantee lapsed about a year ago . I was wondering whether or not this has something to do with the cmos battery. Apparently several people I know who purchased a Compaq laptop have run into the same problem. I have a friend who owns an IBM thinkpad which has done precisely the same thing. Any suggestions.
Sincerely
Frank
 

A:Compaq presario 1200XL111

It is possible for the cmos battery to cause similiar problems, but from what you are saying it looks like a processor problem. For the system to just shut off in the middle of being used and unable to start up again, shows the possibility that the processor has overheated and the machine has powered off, however because the machine is still too hot it wouldnt fully start up again.
To say that your video has then gone, could mean the processor is completely knackered, signs of life can still be seen from the machine but nothing will appear on the screen, in most cases the monitor will stay on standby even when the machine is powered on.

I suggest a new processor, with new heatsinc and fan.
 

3 more replies
Answer Match 56.7%

I recently bought this machine and at first it worked fine. Last time i used it no probs and even shut it off correctly. The other day I went to turn it on and nothing. The led light that says that it is pluged in is on but now it is not charging the battery. I can get it to come on enough to hear that it is running but it is not booting and the screen remains black. I contacted that previous owner but she said she never had any problems with it. I want to see if it can be fixed, cheeply if possible, befor I do anything else. Thanks for the help.
 

A:compaq presario 1200

Sounds like your gonna have to get you hands dirty and take the cover off. Remove the cover and start pulling out parts. ;-)

The best way to troubleshoot a machine is to only boot with the bare requirements.

CPU, RAM, VIDEO CARD...over course power supply...

I'd take out all other parts and PCI card, remove all hard drive cables and floppy cables. Take note which way the RED LINE goes when you put it back together...

If you have MOVED the computer recently, IE transported the computer in the back of your car truck, you might want to try and RESEAT the video card, and RAM. Shipping a computer in the mail and it arriving DOA at the customer more than likely points to a video card that needs to be reseated. Lucky for us, most new motherboard come with AGP slot lock thank goodness...
 

2 more replies
Answer Match 56.7%

I have had this PC since 2001 and it seems to be in good working condition. It originally came with Windows ME and two years ago, I upgraded the OS to Windows XP. I need help to clean the computer and start over as new. How can I do this?

Thanks

More replies
Answer Match 56.7%

ok the dilemma is simple ok i bought this new laptop for the wife then it came with a built in webcam truth is i don't want that webcam so i bought another webcam that i am trying to use on msn but the laptop states found new hardware but doesn't install my webcam is usb ported it says m style on the cam the only thing it uses my wife states that she can access the cam thru the control panel but not in msn why is this occuring if someone could get to me asap would be greatly appreciated thanks in advance
 

A:Ok new laptop compaq presario

You may need to disable the original webcam

You can disable it by going to: Device Manager (Start->Run-> Devmgmt.msc)

Then locating your Webcam (that you don't want to use) and then right click on it and select disable

Then go back to MSN and use the settings to set up the new webcam
 

1 more replies