Tech Problem Aggregator

Windows 10 x64 - HP Pavilion G6 2210sa - Wireless not switch...

Q: Windows 10 x64 - HP Pavilion G6 2210sa - Wireless not switch...

Hi I have an HP Pavilion G6 2210sa withan Intel Centrino Wireless N 1030 wifi card, runing Windows 10 x64 fresh installation Bios Version F.26 I am having issues with wireless connectivity. In device manager there are no error symbols. I can connect via ethernet with no problem. When I go into the bios F.26 and reset to default settings and start windows 10, The adapter functions fine and i'm able to connect to wireless networks. Upon restarting the laptop I'm faced with the original issue the f12 key changes to orange, and stays orange toggling from airplane mode to wifi mode. Windows trouble shooting suggests that the wireless capability is turned off. It suggests to turn the wireless capability back on using the function keys (F12). I do this and cannot connection to any wireless networks. I have prevented the computer turning off the wifi adapter power in device manager. Please could you suggest a solution?? Many Thanks in advance

More replies
Answer Match 77.28%

Hi I have HP Pavilion g6-2210sa. I know this old laptop but their seems to be a big problem with this. It keeps getting hot at the bottom of the laptop. It gets really hot when I am only surfing the web and on youtube to the point its uncomfortable to have on my lap. What do you think the problem with the heating would be?The fan does not ever go off in fact its on all the time.Any idea why?Also I want to use the hard drive M.2 NGFF SSD to 2.5in SATA Adapter Converter LINKhttps://www.startech.com/HDD/Adapters/M-2-NGFF-SSD-to-2-5in-SATA-Adapter~SAT32M225Just wondering would like work?The hard drive would be moved to the cd rom drive as I don?t need cd drive but I need help in cd rom to sata hard drive adapter.Also is possible to upgrdae the wireless card to a 5g one?Could some please help.

A:HP Pavilion g6-2210sa overheading bottom and fan on all the ...

The M.2 to SATA adapter will work but it will just be a more expensive way to have a SATA SSD. Just buy a 2.5 inch SATA-III SSD and it will perform the same as an M.2 drive in that adapter. The only way the adapter makes sense is if you got some kind of a great deal on an M.2 SATA disk like somebody gave it to you free.  The overheating means the laptop needs to be opened and cleaned out inside and new thermal compound applied between the CPU and heatsink. Post back for help with that if you want to try to do it yourself.  Once you install the SSD, either M.2 or 2.5 inch SATA you can certainly move the old mechanical drive to a DVD adapter caddy.  If this is "the Answer" please click "Accept as Solution" to help others find it. 

2 more replies
Answer Match 68.88%

I am runninbg Linux-mint 17 but I cannot find any way to turn on my wifi on my Pavilion TS 17-g199gr laptop. I can connect via a hardwired lan but no wireless.  I cannot find any key that is used to enable/disable the wireless card.   When I run diagnostices it doesn't show a wireless board.  

More replies
Answer Match 66.78%

My pavilion dv2418nr wireless switch light stays orange, will not go to blue, will not recognize any surrounding neighborhood connections.  ISP says the router is fine, that it is the laptop switch not allowing the wireless card to read any connections. HP tech had me connect the Ethernet cord from the router to the laptop....I got on internet fine...however, that's a hard connect.  Has anyone had this problem with their switch?  i think until that little light turns blue I'm out of luck.  Thanks for you help











Solved!
View Solution.

A:My pavilion dv2418nr wireless switch light stays orange

Hi, Try a Hard Reset as follows. Shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for a full minute.  Re-insert the battery, plug in the AC Adapter and start the notebook. Regards, DP-K?

9 more replies
Answer Match 63.84%

I have Windows 7 Professional on my PC. In the first load I had, the PC should automatically detect if the LAN cable was plugged in, turn off the wireless radio, and change the network icon in the right bottom corner to reflect the cable was now in use.
Unfortunately, I had to reload my PC, and since then I can't get it to do it again.
So, what I'd like to achieve is this: Have Windows automatically detect when the cable is plugged in, turn of the wireless radio, and change the network icon in the right bottom corner to reflect the cable is in use - and, obviously, vice versa.
Can someone tell me what I need to do, please?

A:Have Windows 7 automatically switch to LAN when cable is plugged in and switch to wireless when it's removed

Hi,
There are two methods can help you.
1. Go to <Network and Sharing><Change Adapter Settings> and right click your wired and wireless adapters one at a time to change the properties. Select IPv4, click <Properties>
then click <Advanced>. For each one, clear the "Automatic metric" check box and assign the metric value manually. Setting your wired adapter?s metric value lower than wireless adapter one, such as ?1? for wired adapter and ?2? for wired adapter.

2. Go to <Network and Sharing><Change Adapter Settings>,
hold down 'alt' to bring up the "File" menu, select "Advanced", select
"Advanced Settings" from the dropdown menu, adjust the priority of your wired adapter higher than your wireless adapter in the "Advanced Settings" window under the "Adapters and Bindings" tab.
Hope this helps.Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

3 more replies
Answer Match 54.6%

Hi everyone, I searched through the forums but couldn't really find what I was looking for.

Currently we have a DHCP server set up to a switch, that has a special line connecting to a switch in our shop which is just across our back lot, giving network access to the few computers over there. They recently put in a new machine that needs network access, but they have already accidentally cut two ethernet cords. I'm looking to provide a wireless solution for the machine, but I don't want to have to spend a few thousand dollars on a large wireless switch.

Can I plug a wireless router into the switch in our shop, and essentially turn it into a wireless bridge, or is there another, simpler way to do this?

If this has already been answered, sorry for missing it!

Thanks!
 

A:Solved: DHCP Server -> Switch -> Switch -> Wireless

While you could use a router, or even configure the router to act as an access point, why not just buy a true access point? They start at $27: http://www.newegg.com/Store/SubCate...ame=Wireless-AP-Bridges-Repeaters&Order=PRICE
 

2 more replies
Answer Match 54.18%

The number "2 key on my laptop has broken. Does anyone know of any sites i can purchase a new one from as i have looked all over and can only find US versions that do not fit. The product number is C6S45EA#ABU. Any help is appreciated. Ed

More replies
Answer Match 54.18%

Are there any CPU upgrades available for my laptop?I'm going to upgrade the HD and the memory so if there is a faster cpu available it would be good to do it all together. Thanks for any help, David. 











Solved!
View Solution.

A:CPU Upgrade g6 2210SA

Yes you can here is the Manual: Manual The Manual lists these 2, which are faster than your 2.5 ghz i5-3210M: Intel Core i7-3632QM (2.2 GHz, SC turbo up to 3.1 GHz, 1600 MHz/6 MB L3 cache, quad core, 35 W)  Intel Core i5-3230M (2.6 GHz, SC turbo up to 3.1 GHz, 1600 MHz/3 MB L3 cache, dual core, 35 W) The i5-3230M is only .1 ghz faster so not worth the effort or expense but the i7-3632QM would be a worthwhile upgrade, but still brings a premium price around $200-250 on eBay and through parts houses. Too much money in my opinion. Your call. Let me know if you want me to help you find one at the best possible price. Save the money and get a solid state drive. Also much easier to install. The processor you have ain't bad. If this is "the Answer" please click "Accept as Solution" to help o thers find it.  

3 more replies
Answer Match 52.5%

Hello, I took the plunge recently and updated my M6700 from Windows 7 Pro to 10 Pro. I think I finally have all the driver kinks worked out, but I have found out that Windows 10 seems to ignore the BIOS setting for the wireless switch on the side of the laptop. I have the BIOS set for the switch to only turn off WLAN and leave bluetooth on since I use a bluetooth mouse.  Under Win 7 this work just fine, but under Win 10 it activates airplane mode and also disables the bluetooth radio. I cant find any setting to change this. Has anyone else run into this?
Thanks!

More replies
Answer Match 52.5%

I upgraded my Vaio Laptop VPCEG2AEN 64-bit from Windows 7 to Windows 10 couple of days back. Since then the Wireless switch & its green indicator light is not working. Fortunately via the VAIO Smart Network icon I am able to connect to Wifi.
Does this mean that Windows 10 caused hardware failure ? Desire to understand this behavior.

More replies
Answer Match 52.5%

Hi, I have a Toshiba laptop and everytime I turn on the computer I have to cycle the Network Communication Switch from on to off and then on again. When I start the comp it is in the on position, but not working. I believe my network adaptors are working fine, but I may be wrong. How can I configure my computer to keep the network communication switch on when I turn on the comp. This is becoming a real hassle when I logon.
Thanks
Randy
Neophyte
 

A:How do I get my wireless communication switch to start when I turn on Windows?

6 more replies
Answer Match 52.5%

My hp pavilion recently updated itself to Windows 10. Since the update i have been unable to switch it on whether plugged in to a power source or not. While plugged in to a power source it sometimes illuminates the orange charge light, sometimes it flashes when i press the power button and sometimes it does nothing at all. This pavilion is only 6 months old and used infrequently.  

A:hp pavilion won't switch on.

Ttaylor2711 Hello;Allow me to welcome you to the HP forums!Since this is a relatively new machine, instead of struggling for hours to fix it yourself, why not just let HP fix it -- for free!!  While this PC is still under warranty, you should contact HP Customer Support directly to have them put you in touch with HP Technical Support to see what they can do about diagnosing and repairing your machine remotely.I did this recently and the HP Tech was able to remotely access my PC from the Internet and do the needed repairs.If you live in the US or Canada, contact information is on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1If you live elsewhere, contact information is on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.htmlNOTE: After you get through, stay on the line until you are finally able to talk to some one -- it can take a while!Good Luck========================================================================I am a volunteer and I do not work for, nor do I represent, HP.---------------------------------------------------------------If my posts helped you, please click the Thumbs-Up symbol to say thanks.If my posts solved your problem please click "Accept As Solution".========================================================================

1 more replies
Answer Match 51.24%

I bought my Pavilion dv6 laptop from HP in 2012 without the Blu-Ray option?  Can I switch out the dvd for blu-ray now?  If so, how do I go about it?

A:can I switch dvd for blu ray player in my pavilion dv6 (2012...

I will be needing the exact model number to find precisely the correct part but it is a piece of cake. Flip the laptop onto its back and there is a single screw either accessible directly on the bottom or inside the service bay. Remove the screw and the DVD drive slides out and you can purchase a Blu-Ray reader and DVD burner combo drive on eBay or amazon.com and slide that into its place, replace the screw and you are ready to go. You will need a Media Player which allows Blu-Ray playback if you want to watch movies. The price of all optical drives has come way down in the last couple years. 2 years ago a Blu-Ray drive would have cost over $100US but now it is likely to be $50 or under.  You can also rebuild your drive module using a generic Blu-Ray drive and swap over the mounting hardware and faceplate but there is just not much to be saved that way any more as the price of the full drives with all hardware and plastics has come so far down.  I will say that if you have a standard resolution laptop screen like 1366 x 768, the difference between a movie on a DVD and a Blu-Ray is hard to tell. Blu-Ray is noticeably superior at full HD 1920 x 1080.  Tutorial on finding exact model number: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00033108

1 more replies
Answer Match 51.24%

When the WiFi button (F12) is pressed the LED show red and a message on-screen briefly says "Flight Mode ON" and the network connection icon in the notification area shows a red X. - this is expected - however When I press F12 the on screen message does breifly display "Flight Mode OFF", but the LED stays orange and WiFi is disbaled. If I click the network icon in the notification area the panel that appears says Flight Mode OFF, WiFi (OFF). I simply cannot re-enable the WiFi with the F12 key. If I go to Computer->Properties->Device Manager, select the Wireless Adapter I can switch the WiFi back on by going to the Advanced tab and selecting Radio->Enable. If I do this the let then goes white and WiFi is OK. So what is going on - why can't I simply toggle the WiFi off and on with the F12 key. Why to I have to resort to the device manager to switch it back on again?

A:New HP Pavilion G6 - F12 switches OFF WiFi but won't switch ...

Solved my own problem - if it help others ....the WiFi Driver update dated 25/09/12 caused the problem in my case.Right click on 'Computer' select 'Advanced' and open Device manager. Locate the WiFi Adapter and choose the 'Roll back driver option' to restore the previous driver - worked for me. You think someone would test drivers better than this !!!

9 more replies
Answer Match 51.24%

Hi, I wish to replace my internal 54 mb mini pci wireless card with a faster 108 mb one, however when I asked hp support what specs I need, they claimed I cannot, I can only use a faster external adapter type. Anyone one know if theres a way around this? Will my bios not support another card?
 

More replies
Answer Match 50.82%

I just reinstalled my computer with windows 7 64bit and I have HP pavilion dv7 6050ec with two graphic cards : mobility radeon HD 6770M and a generic Intel HD Graphics Family. Since I reinstalled the computer, I no longer have to option to chose what graphic card I want to use. Before this reinstallation I could just right click on the desktop and there was a option that said Switch Graphical units, but now there is nothing like that. And I have the latest drivers for both graphic cards and latest Catalyst Control Center and Direct X installed. And in device manager all drivers are installed correctly. So I have no idea what to do.
Please help

A:Cant switch graphic cards on HP pavilion DV7 6050ec

Have you looked in BIOS to disable the onboard video? I don't know where that option came from, I confess that I've never seen it. Otherwise, you could try and disable the onboard video in the device manager.

3 more replies
Answer Match 50.82%

pls help me if you can. my son tampered with my dv 3 in my absence. he cut off the ten pin power switch connector. my problem is that its a ten pin connector from the mother board but on the power switch main small board, it has only 9 pin. can somebody tell me how to position the connector to solder it back ?. I'd be grateful if anyone will help me out. thanks in advance

More replies
Answer Match 50.82%

Hi I recently purchased a Tiny universal adaptor after having left my H.P charger in a different location which meant I was going to be without it for a week or so.The Tiny charger did not pass on any power to the laptop.. I have since got back the H.P charger which came with the laptop, and tried powering it up. Still nothing.  My laptop is one of the B&O line with a non-removable battery. Do I need to claim on the warranty and replace or is there an easy fix? ThanksWill

More replies
Answer Match 50.82%

My notebook which has 8gb ram is running well 1day before but now it is not switch on. When i switched on the device it is turn on for a seconds then it is auto shut off before a day it is turn off the display and turn on when i enter the enter button for 3 -5 times. What van i do

More replies
Answer Match 49.14%

Hello, I specifically want a wireless-router with an on/off switch for the WiFi itself. Ideally a switch that will stay in postion until you press it again.

Apart from that the router needs to have all round good performance. Price isnt too much of an issue.

I'd really appreicate any help. Thank you.
 

A:Solved: Need Help to Find A Wireless Router with Wireless on/off Switch

8 more replies
Answer Match 49.14%

i can't find any wireless network using my laptop.
i try to switch on the wireless using the hardware switch on the lapto(fn+f2) but the wireless led wont come on.

need help. flying off in a few days need the wireless to work. =(
thanks.
 

A:Cant find wireless network. possible wireless switch problem.

Some laptops need drives to activate the appropriate "FN" designated commands. Did you reinstall the PC recently?
Are you near a network you can connect to? Go to library, most of them have free Wi-Fi.
Also you can try to activate the card manualy. Go to Control Panel > Network Connections > and right click of your Card and "enable"
There is a low chance of this happening, but led might have burned out. Let us now how it went...
 

2 more replies
Answer Match 48.3%

I have installed a wireless card on a Compaq Presario 2200 laptop and tested it out with an antenna from a Toshiba A100 and an HP V6000 to no avail. (No networks found).

It also shows 'check to make sure the wireless switch is on'. This laptop has only got a plastic cover over where the switch would normally be, so is there any way to get the machine to use the new wireless without having to find a little switch for it?

Cheers

Blair
 

A:Installing wireless on a machine with no wireless switch

You need to use a USB wireless adapter with the proper software installed
 

4 more replies
Answer Match 47.88%

Need to no if I have this right

they have a dsl modem going to a Linksys router to a 24 port switch then to a little 4 port switch. sure, so then Would it be modem to router then router to any port on the big switch or is there an uplink port on the big switch it should go to? then you would hook a cat5e from one of the regular ports on the 24 port switch and run it to the uplink port on the 4 port switch need to no if the whole sequence is right. Hope someone can help, john will told me the cable would go from the big switch to the uplink on the small switch but I am wondering if I have it all right or not and wonderiing about from the router to the 24 port switch does the cable just go in a regular port in the big switch or if there is an uplink port does it go there. Hope you can understand my rambleing here. Thanks (please don't send me to a link) just need to no modem to router to regular port or uplink port on 24 port switch then from regular port on 24 port switch to uplink port on the 4 port switch. Thanks
 

A:Solved: Windows xp hookup question for modem, router, switch, to switch?

Router to uplink port on 24 port switch, and then normal port on the 24 port switch to uplink port on the second 4 port switch. An auto-MDX port on a device negates the need to worry about uplink ports for that particular cable connection.
 

3 more replies
Answer Match 47.46%

One question I need to know

If you go from DSL modem to Router then Router to switch
my question is then
If I wanted to hook another mini linksys switch into the bigger switch would you run the cat5e cable from the first switch to a reg port in the second switch or would you run it to the uplink port and then hook the 1 or 2 computers into the reg ports of the second switch.??
 

A:Solved: Windows xp-question of hookup switch to switch?

Obviously, run it to the uplink port if available.
 

3 more replies
Answer Match 46.62%

Hi there HP Support Assistant ran a BIOS update this morning and ever since I installed the update the wifi capability of my Pavilion dm4 3002sa (running Windows 8 fine since November 2012) has been compromised. Basically, the wifi button stopped working and windows can't find any wireless device built in!? I have updated all relevant drivers including the supposed HP 'fix' for the F12 button but now the F12 wifi button toggles Airplane Mode on and off only.  I can't turn the wirless device on through PC Settings as the little toggle icon there is greyed out so won't allow me to do anything with it. I have gone into BIOS settings and set them all to default but still the same issue. Can anyone advise on a solution - I am due to travel for work on Monday so it would be great to get this fixed otherwise i take I will be taking a laptop away alongside an ethernet cable!! Is this simply a bad driver issue that HP will sort quickly?

A:Wireless & wireless button not working Pavilion dm4

Hello! Just had the same problem and I seem to have found a solution. I turned off the laptop, removed the battery and unplugged the power. I then pressed the power button for 30 seconds and the put the battery back in and plugged in the power.

9 more replies
Answer Match 45.36%

I have 2 pcs, one is connected to a high speed cable modem and linksys router, and the other is wireless.

I need to switch them around, but am wondering if there is anything special I need to do.

Can I take the wireless card out of my pc and put it into the other one or should I just buy another wireless card?

Also, I have the old ethernet card from before, but can I just put that where the wireless card is now?

How do I go about doing this switch? Is there any type of configuring I need to do?

Any input would be greatly appreciated.

Thank you!
 

A:Wireless Switch

6 more replies
Answer Match 45.36%

Hey all,

I had to reinstall Windows Vista to my laptop, and when I restarted it to see how it was working the wireless button wouldn't turn on. My laptop is the type that has the button above the keyboard that normally turns blue when it's on and available to connect to a wireless network.

Does anyone know how to go in through the Run prompt to get to the administrator settings to reactivate the wireless button? I found it online at one point, but I can't remember how now.

A:Wireless Switch

Is the wireless driver properly installed? Meaning in Device manager, there are not "!" marks?

1 more replies
Answer Match 45.36%

My gateway laptop will not switch from ethernet to wireless i dont know how to change it keeps saying cord required but i want to use it wireless. Someone plz tell me how to switch it back.i tried searchin for a wireless adapter but none come up.
 

More replies
Answer Match 45.36%

Hi, Just updated my version of Windows 8.1 to 10, however since doing so I am unable to switch on my Wi-Fi. I have ran all the updates from Windows, ran all the HP Support Assistant updates, updated the HP drivers and still no luck. Followed the self help suggestions, yet still unable to click the Wi-Fi 'On'. It just toggles straigh back to the 'Off' position. Prior to the Windows Update, the wi-fi was running fine. any ideas/help would be great! Cheers DP

A:hp 250 g4 wireless - Will Not Switch on

I had the same problem.  I reinstalled the latest bios from the offical site after the install was completed I restarted the laptops and the wirless was switched on. Hope this works for you to. Thanks MC

1 more replies
Answer Match 45.36%

I have an e-system EL3103 lap top and am trying to connect wirelessly to the net but the only way I can do it at the moment is to use ethernet link up. I need to find out how to turn on to wireless but don't know where the switch is.
Can anyone help me. This is a PC world purchase and came with no manuals.
 

A:wireless switch

i will move to networking

First lets see if you actuall have wireless on the PC

{Device Manager}
Post back the results in device manager
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} > network adaptors, click on the + > post back the devices listed there
are there any ! ? or X

for windows 7
start > control panel>
System and Security>
Device Manager

------------------
The switch will be a physical switch anywhere on the PC
or a combination of F keys

there maybe a manual online - i'll see if i can find
 

3 more replies
Answer Match 44.94%

I an running windows xp home with sp2 installed. I keep getting a dialog box that opens when I boot up the says Wireless Switch Utility has encountered a prolem. I am using a wireless router and this is a laptop running on a home network. What is the wireless switching untility and how do I fix this problem. I am getting the internet and I am able to see and upload or download from other compteres on the network. Thanks
 

More replies
Answer Match 44.94%

I have a little problem; I have an aspire 5920 laptop that usually connects to the internet fine. I have unknowingly turned off the wireless switch, though, and now it won't work. Could somebody help me locate the switch or tell me the function keys to turn it back on?
 

A:Can't find my Wireless Switch

Hi kruss08, and welcome to TSG.

Page 26 of the Aspire 5920's User Manual shows the location of the WLAN (Wireless LAN) On/Off switch.
 

2 more replies
Answer Match 44.94%

I have a Toshiba L655D, Satellite.. I cant get the wireless receiver to turn on. The FN+F8 button is the on/off switch, no other switch on the  outside of this PC. May have deleted a program for that , but not sure.. The realtek  LAN 802.11, is working properly... All troubleshooting test results say to turn on wireless capabilities.. I can connect thru Ethernet cable... all the other F buttons are working. What's the problem?

A:wireless switch not working

Make sure you've installed a driver for your wireless card. You can find one here.

5 more replies
Answer Match 44.94%

I have a 2 year old Sony Vaio laptop, running Windows XP Pro with built in wi-fi, which up until last night was working perfectly.
The problem is when I went to move the slider switch to 'On' this morning, the green light failed to come on, and i can't connect to the network. The slider feels a little loose too.
Also, when I went to shut down last night (Well, i put it into 'hibernation' mode...which means it boots up quicker), it just 'hung' saying what it was going to do....i accidentally closed the lid, then opened it back up.....i tried to reboot, but it wasn't having it, so i took out the battery hoping that would help....which it did, then i booted back up......i think this may be the reason i can't connect.......i've switched off and put back on all my router plugs etc, but to no avail.i can still connect to my desktop ok.
So, any ideas? What went wrong and can it be fixed? is it a loose wire inside?
Any help appreciated guys!
Thanks!!!

Rob
 

A:Wireless switch not working! Help!

16 more replies
Answer Match 44.94%

Hi.....I use a KV switch to connect 2 computers using one monitor, mouse and keyboard. Is it possible to use a wireless keyboard with this setup? Obviously, at this point the mouse and keyboard and attached to the KV switch by USB. Not understanding the wireless, I'm wondering if it can only program with one system at a time. Thanks for any input!
 

A:KV switch and wireless keyboard

It really depends on whether or not your KVM will allow USB hardware detection.
Some do,some don't.
Shouldn't hurt to try and find out.
 

1 more replies
Answer Match 44.94%

Not sure the title makes sense... but here goes:

Right now, I have Comcast HSI going to a dlink wireless router and all is good.

I have a new PC on a different floor of the house that I want to connect to the network. I don't want to snake cat5 throughout the house and it has no wireless card.

What I want to do is place a second wireless router (netgear wgv615v) in the room with the new PC and connect it (to the PC) with a cat5 cable. Then the netgear should connect to the wireless n/w and the PC gets a DHCP address from the dlink

Is this possible?

I've tried setting the netgears public IP as something in the DHCP range but I don't think that will work as it will never sync up to the dlink.

Am I missing something?
 

A:wireless AP as wired switch

A few routers will work as a wireless bridge (AP client). If the Netgear wgv615v is one of these, simply configure it as described in the user manual.
 

2 more replies
Answer Match 44.94%

Is there any way to turn the wireless on?

A:My wireless switch is broken

Fill out Your System Specs with "System Info" please.
See here: System Info - See Your System Specs

7 more replies
Answer Match 44.94%

New to this forum. My apologies for posting this content in the vista OS forum. I realize this is the appropriate place to start. Thanks for your help

System: sony vaio
model: vgnar630e,
OS: Vista 32 home premium,
Wireless adapter: Intel® Wireless WiFi Link 4965AGN

Had a malware infection which prevented me from accessing any software and redirecting all applications to MS Word. Not sure if all malware, etc are completely removed though System is functional now, except the wireless switch in front right side of laptop came on briefly then went out again soon after going through the last step of of malware removal process using MGtools.

I have updated all drivers. Gone to intel site to update wireless driver with most current, downgraded back to sony original driver, removed all third party wireless lan utilites and it still does not work. Called sony, my system is out of warranty and they are charging over and above what I can afford. They know the problem but will not fix it until I cough up enough dough. Any help to get to the bottom of this will be highly appreciated.

Thanks
cape

A:Wireless switch problem

I've seen those switches go bad before. Is it a physical switch or a hotkey?

5 more replies
Answer Match 44.94%

My Z3 stopped detecting wi-fi, I now have to use a cable.  Even after a return to Factory Settings there is no indication of any wi-fi.  My home wi-fi is working as normal.  Have I accidentally switched off wireless on the Z3?  If so, how do I turn it back on?

A:Is there a wireless switch on an Aspire Z3 All-in-...

What operating system are you running?
 
Also, can you provide the first 10 characters of your serial number?
 
 



Important Links: US Driver Downloads | Knowledge Base Articles | Service LocationsRemember to mark posts that resolved your issue with Accept as Solution.You can even mark multiple posts in a single thread. This will make it easier for others to find the same information.

3 more replies
Answer Match 44.94%

Hi. I purchased a used HP Compaq laptop, NC 6120, and the wireless switch, I can't figure out how to turn it on. Pushing it, doesn't work. There has been no response from the person from whom I purchased it, no manual, no information on the Windows troubleshooting. I looked on several websites, with no definite solutions.
The laptop came to me, with Windows 7, installed in it.
Thank you.
 

More replies
Answer Match 44.94%

Can't seem to detect any wireless networks and no wireless adapter is listed in Network Connections.

HP dv6152eu with XP Media Center

When I switch on the wireless switch, The Bluetooth LAN Access Server Driver comes up in Network Connections. Have tried uninstalling it and restarting and also downloading drivers from the HP website.....

Would they have put a Bluetooth Adapter in instead of a Wireless Card ??
 

A:Bluetooth comes up when Wireless Switch On

14 more replies
Answer Match 44.94%

i have just reinstalled vista on my amilo li1718 and according to device manager the driver is working correctly but i cant turn the wireless on via the switch on top

A:wireless switch not working

Driver is probably a generic wireless driver that windows update has installed. Try and get hold of the driver from Fujistu site...

I found these:

http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=A172B7BC-5140-441B-97D0-85C336545CC6&OSID=DD13C337-8EFF-4CFB-A589-72971D7BCBCE&Status=False&Component=WLAN%20miniCard%20D2301

http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=689AC3EC-583D-4B7F-8D1A-CED2F9D7EED8&OSID=DD13C337-8EFF-4CFB-A589-72971D7BCBCE&Status=True&Component=WN6301A%20miniCard%20WLAN%20%20IEEE802.11%20b/g

http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=D2609B59-645A-4306-B864-9C0CA26E4773&OSID=DD13C337-8EFF-4CFB-A589-72971D7BCBCE&Status=False&Component=WN6301A%20miniCard%20WLAN%20%20IEEE802.11%20b/g

Download the ones that apply, seems as though they ship the li1718 with a variety of Wireless cards.

Also check your Wireless settings in BIOS (if any)

1 more replies
Answer Match 44.94%

Configfree Connectivity Doctor says that the wireless communication switch is off. The problem is that the light is showing as on. What can i do to reconnect through the wireless router? Thank you for any help you can gve me.
 

A:Wireless communication Switch

Start>Run>cmd

Type ipconfig /all

Then click on Command Prompt in upper left corner > Edit > Select All

Then hit the enter key on the keyboard. This puts the ipconfig information in the copy buffer and then paste the results in your reply.
 

3 more replies
Answer Match 44.94%

My computer's wireless switch is turned to on, but the green light indicating it is working is not, and the computer says it cannot detect any networks. When I reboot, the wireless light goes on as the computer is loading up, and I can even see my network detected. Then, when it finishes loading, the wireless is gone again. This happened suddenly. Any ideas why or what I can do about it?

A:Something is disabling my wireless switch

I am not sure what brand of computer you have; but check the Power Saving application with your Laptop manufacturers name on it to see whether Wireless Networking (also sometimes called WLAN) is enabled on the current Power Plan.

1 more replies
Answer Match 44.94%

i have a gateway m520 and recently reformatted and reinstalled with the disc which came with the laptop........everything is lovely except!..........i cannot not use the fn+2 switch to toggle my wireless connectivity, this is driving me mental, what on earth do i need to do

thanks in advance people ,

dougiemcvey ....
 

A:gateway wireless fn+2 switch

are you sure the Key works and not stuck at all?
 

2 more replies
Answer Match 44.94%

hello ,
first i spill liquid gel on my keyboard. it spilled on bluetooth , volume , enter , shift area.

so it messed my keyboard function. but then i let it dry for like 9 hours. then i on it back. my keyboard function well. but unfortunely my wireless switch does not turn on eventhough i press it. but my bluetooth function well.

how to solve it ? my os is window 7 home premium n my laptop is acer 4736Z.

help me ! ;(

A:MY WIRELESS SWITCH DOEST NOT ON

The spill may have damaged some circuit under the keyboard which is related to the wireless chip. If you've never worked on laptop repairs before, let a repair centre take a look at it. They may be able to repair it.

You can also probably send it to Acer for repair if you contact them first, but without a warranty they will charge a lot of money.

1 more replies
Answer Match 44.94%

I'm having an issue where I had my wireless switch key set to Off when I was in Windows 7 and had it running on Ethernet. After I upgraded to Windows 10, I was unable to switch the Wireless Key to On because it was remapped to the Airplane Mode Button.

More replies
Answer Match 44.94%

Hi, was just wondering if there was a feature on Windows 7 which will automatically switch from wireless to wired connection when I plug my computer into my modem or router. I have heard of such thing, but am not sure how to do it.

I am running on windows 7, and own a Dell Inspiron N5110.
 

A:Wireless Auto Switch

6 more replies
Answer Match 44.94%

My friend has a Toshiba Satellite laptop. I am not sure of the specific model. Also I think some of the hardware was put in after the laptop was initially purchased.

It has a built in wireless card, but it is not turned "on." When I try to connect with it, it says to turn on the wireless switch. How would I do that?
 

A:Turning wireless switch on

With my Dell the switch is the Fn + F2 key combination, with the F2 key denoted with a blue tower antenna icon. I think in another thread somebody said the switch on their Toshiba is on the front and is cleverly disguised to look like simply an indicator.
 

2 more replies
Answer Match 44.94%

Hi guys..

Got a small question about adding wireless to my Exsisting Setup.

Currently I have 1 computer used to connect to the internet with ADSL, it's shared to 3 other computers using a local switching hub.
My home hub is connected to my work's hub about 70M away from my Home.
with another 3 Computers at Work...

So all computer in my network are working great! Sharing files/Internet

I got a new Wireless Laptop with 11g 54Mbits.
Can I add an Access Point to my Home Hub and another Access Point to my hub at work, so that my Lappy can be used wirelessly both home & work???

Or must I rethink my entire network with the use of a new ADSL Modem with router..
I'd perfer to stay with my current setup.
 

A:Adding Wireless to my HUB/Switch?

Yes, this is exactly what you can and should do instead of going and buying a new wireless router like most people.. *mutter*
 

15 more replies
Answer Match 44.94%

hi,

i 've got a mobile centrino laptop using Intel® PRO/Wireless 2100 LAN MiniPCI Adapters card on XP Pro.
i cant seem to connect to my wireless router. works fine whn i plug in my PCMCIA wireless card.
basically when i open the intel wireless prg under control panel and check...the Wireless Radio is set to 'off' and the 'on' option is disabled and so nothing can be changed.
i have also checked under Control Panel>system>device manager>hardware>Network card and checked if the Wireless radio option isn't switched off from there. It isn't.

i have updated the driver yesterday but to no avail.
so jus wondering how do i get the thing to work ? ideas pls.

thanks
 

A:Wireless Radio OFF. Switch on, how ?

8 more replies
Answer Match 44.94%

 Laptop = Acer E1-510-4457OS = Win 8.1 x 64 Requesting assistance how to connect Laptop to wireless network (cell phone wifi hotspot). I live in remote rural area, only internet access is wireless via cell phone. Method to turn on Wifi on this specific Acer -is Fn + F3--- To confirm wireless switch is on, a light will come on left side front panel where there are 4 lights, the 4th right light is WiFi- - irregardless of how many times this combo is done, WiFi Light never turns on. I have spent month researching online, ACER community forums, Win 8.1 forums for wireless etc. ?. Apparently this is common problem with this laptop model. The following suggestions that helped ?solve? some Acer users?. I have attempted but have not been successful. >>>>>> HELP <<<<<<< Suggestion #1  Recovery to previous windows updates?unsuccessful.========================================== Suggestion #2. Click on Network connections, lower right corner, click on wireless connection. Problem:Message says "No connections are available" Clicked on Troubleshooting-- result -- A Network cable is not properly plugged in or may be broken.".......... connected USB phone cord to laptop, Internet Tethering option, mobile hotspot option did not work.========================================== Suggestion #3.1) Click on start --> In search bar, type ncpa.cpl and press Enter. "Network Connections" will be opened.... Read more

A:Acer E1-510 Win 8.1 x 64 - Wireless Switch (Fn + F...

If you are not already at the 2.14 bios version, update the bios. Try the wifi. Go to Device Manager, right click on the wifi adapter and choose Update driver software.

1 more replies
Answer Match 44.94%

I have Uverse on the first floor of my house. How do I connect a switch to that from the second floor so as to connect desktops to the network? I don't want to run cables or drill holes in the floor. Is there a wireless switch or bridge that would connect to the uverse box downstairs and allow me to have multiple connections upstairs?
Thanks.
 

A:Wireless switch or bridge

I don't want to run cables or drill holes in the floor.Click to expand...

Me neither; but that's what I just finished doing this afternoon because I decided I wanted the increased reliability.

A Wireless Bridge may work. If you can't find one look for Wireless Access Points that include the Wireless Bridge capability. Some people choose to use, or at least try, powerline adapters.
 

3 more replies
Answer Match 44.94%

Currently I have my Yahoo AT&T Modem hooked up to a switch.
Also hooked up to the switch is my main PC, and my Wireless Hub.
When I try to use my PC and my Laptop via the WIFI from the Wireless Hub, it gives an error message saying that the IP address are conflicting, and wont work.

Can anyone please help me fix this?
Thanks,
-Ander
 

A:Wireless Hub and Switch IP Confliction

8 more replies
Answer Match 44.94%

My friend has a one year old HP laptop she purchased from the QVC shopping network. Wifi has been working fine until yesterday. Troubleshooting the problem says wifi needs to be enabled. There is no wifi FN key on her keyboard, nor is there a wifi hardware switch. How do you enable wifi on her computer?  (QVC computer support has been of no help.)

More replies
Answer Match 44.94%

hey everyone, I ve got a very strange problem, I'm using an Acer 2920Z notebook which I upgraded it to windows 7, everything works fine except my wireless switch light, it works reversely!!!! when wireless is on the light is off and then when I push its button the light turns on but the wireless goes off.
I have already checked, to upgrade the driver but Acer support center doesn't have any windows seven drivers for this model. SO PLEASE HELP

A:Wireless LAN switch light

Considering all the things that could go wrong, Id just live with it.. You could check for any driver updates for your computer to see if that solves your problem...

2 more replies
Answer Match 44.52%

Hello,

I have encountered an issue with my laptop (MSI L1300, Intel Atom N450, DDR11 1GB, Sata 160 GB, running Windows XP).

They keyboard on my laptop has become unusable due to water damage. All other parts of the laptop remain fully operational. I have taken it to the repair store and they were unable to source the parts for it so I have been using a USB plugin keyboard.

The issue however, is that to access the internet I must turn on the wireless switch usually (FN + F11). The USB keyboard I have does not have this function built into it like my original laptop keyboard does. Nor does it have any means of turning the wireless ability on.

I was hoping to find out a way to manually turn my wireless switch on so that I may continue to use my laptop.

Any help or insight into this matter would be greatly appreciated.
Thank you,
David.
 

A:Wireless Switch Issue - MSI L1300

7 more replies
Answer Match 44.52%

I am setting up a network that has 6 tv's that need internet and 1 wireless router. So I figure I need one modem, one 8 port switch, and one wireless routers. I know very little about all of these execept a little about wireless routers. I am just looking for suggestions for this as in should I get all the same products or is there something I should be looking for? Thanks in advance.
 

A:Looking For Modem->Switch->Wireless Router

9 more replies
Answer Match 44.52%

hello all,
Here is my question. I have a Dell pocket pc and I was wondering if i could use my dial up connection to access the web with it. I have an external modem hooked to my windows nt computer.
I was going to put a 4 port switch on the modem and hookup a wireless access point to a port and let my pocket pc use a wireless card to access it. Question is will the pocket pc access the line to dial up?
Any help would be soooo great!!!
 

A:using wireless access point on switch

7 more replies
Answer Match 44.52%

Hello All,

I'm having Dell Inspirion N5010. When i try to install Bluetooth driver it asks me "Activate Bluetooth Using Wireless Switch" . I tried to press f2 & fn+f2. But no changes. I went to BIOS and Everything was enabled and proper. How do i get rid of this problem?Please help me!!!
 

A:Activate Bluetooth Using Wireless Switch??

8 more replies
Answer Match 44.52%

The switch on the right above the headphones has a radio tower on the left end of the slider. When the slider is pushed to the right, there is red/orange visible. So to connect to a router, do I slide the "wireless switch" to the right or to the left? Sorry, but I cannot tell which is "on."

Also the next button to the right of that wireless switch is called the Wi-Fi Catcher Network Locator. To a non-geek, can you tell me what that is for?

A:wireless switch on Dell E6400

Hi ejlgcpa take a look at this

Reading

How to Enable Wi-Fi on the Dell Latitude E6400 | eHow.com

From the manual



   Note
WHAT IS THE DELL WIFI CATCHER
DellTM Wi-Fi CatcherTM Network Locator
The wireless switch on your Dell computer uses the Dell Wi-Fi CatcherTM Network Locator to scan specifically for WiFi wireless local area networks (LAN) in your
vicinity.
NOTE: For more information about the wireless switch, see wireless switch.
To scan for WiFi wireless LAN, slide and hold the switch in the "momentary" position for a few seconds. The Wi-Fi Catcher Network Locator functions regardless of whether your computer is turned on or off, in hibernate mode, or in standby mode, as long as the switch is configured through QuickSet or the BIOS (system setup program) to control WiFi network connections.
Because the Wi-Fi Catcher Network Locator is disabled and not configured for use when your computer is shipped to you, you must first use Dell QuickSet to enable and configure the switch to control WiFi network connections.
For more information on the Wi-Fi Catcher Network Locator and to enable the feature through QuickSet, see the Dell QuickSet Help. To access the Help file, right-click the icon in the taskbar.

3 more replies
Answer Match 44.52%

Hi,

I'd like to put a wireless router behind a switch to serve as an access point for a couple of laptops in the area. The setup would look like this:

modem > main router > switch > Linksys WRT54GS wireless router

How do I configure the wireless router behind the switch? I've tried disabling DHCP on it and connecting one of its LAN ports to the switch. I see it in the available wireless networks but cant access it. The main router (USR) has an IP of 192.168.2.1, the Linksys is 192.168.1.1, dont know if that has anything to do with it, just giving as much info as I can. Thanks.
 

A:Solved: Wireless router behind switch

This has worked in every case I've tried it, and for a ton of people here. You need it in the same subnet, but outside the DHCP pool.


Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. Leave the WAN port unconnected!

This procedure bypasses the routing function (NAT layer) and configures the router as a switch (or wireless access point for wirele... Read more

3 more replies
Answer Match 44.52%

This is my friend's Fujitsu Siemens Amilo Li 2727 laptop. It's running Windows Vista Home (Basic), SP2.

She claims that when here, at home, the wireless does not work. I ran the diagnostic and it said wireless was not turned on, and that I needed to either find the wireless switch on the laptop itself (which there isn't one) or use the function shortcut (which is Fn + F1). It appears that non of the Fn keys are working, e.g. screen brightness etc. and this may be the only reason why we can't turn the wireless on. However, she claims that the wireless works in some other locations, e.g. at her boyfriends or on uni campus.

Some guy behind the tech desk at uni said it could be conflicting anti-virus software, but we uninstalled it all and still nothing.

Has anyone any suggestions?

Kind regards
 

A:'Fn' Keys Not Working = No Wireless Switch

Try this (found at http://forum.ts.fujitsu.com/forum/viewtopic.php?f=89&t=41532 ) ::

http://support.ts.fujitsu.com/Downl...wareGUID=17BD3889-BAB3-4D85-AF7A-4A59BDCCDFCA

NOTE: don't follow the instructions in the first post of the thread, go to the last post on that page
 

2 more replies
Answer Match 44.52%

Hello,

I have Compal FL90 Notebook.

I installed my wireless driver (driver working but switch problem)

I need active wireless ( FN + F2 ). But this is not working.

I installed wireless select switch vista32&64bit driver,
try compality mode..
try run as administrator..

but not working.

How can i open/run my wireless ? or Where can i download wireless select switch for Windows 7 ?
I cant speak good English language, sorry Thank for your helps..

A:Wireless Select Switch Problem

Hi, i have the same problem. Any idea? My Problem is a File named EBLib.dll. Its not found so i cant run this programm.

9 more replies
Answer Match 44.52%

I have an Acer Aspire 9300. I recently installed Windows 7 from scratch, together with the Launch Manager application from Acer (version 2.0.05).

My problem is that when I press the wireless switch, the orange LED goes out, but the green display at the bottom of the screen says "Wireless Lan enabled", and the wireless connects. When I press the wireless switch a second time, the orange LED lights up, but the green display at the bottom of the screen says "Wireless Lan disabled", and the wireless disconnects.

Does anyone have any ideas please?
 

A:Acer wireless switch inverted

Bump - anyone got any ideas? has anyone successfully installed W7 on this model? Any suggestions gratefully received.
 

2 more replies
Answer Match 44.52%

Running Vista, I did an OS recovery on this machine but 2 problems, first it showed that the "wireless switch is not turned on" but according to my research there isn't a physical switch but rather this pertains to the wireless software but looking in the DM as the attached pic shows the wireless software is there? I tried installing both the Broadcom and Intel Pro wireless drivers from their site here below but that doesn't help:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-dv3500-Entertainment-Notebook-PC-series/3774492/model/3812228#Z7_3054ICK0KGTE30AQO5O3KA30R1
Other issue is as 2nd attached screenshot shows I can't get windows update to run, help please?
 

 Untitled2.jpg   57.19KB
  0 downloads
 

 Untitled.jpg   51.6KB
  0 downloads

A:Hp dv3500 wireless switch problem?

The windows update started working now it's only the wireless issue, I am thinking the internal wireless car may be shot?

15 more replies
Answer Match 44.52%

I have two computers running side by side. They both run Win XP, one Home and one Pro. I'm using two monitors but I want to be able to use the same keyboard and mouse for both computers. My question is if I use a KVM switch that supports USB would it be compatible with my wirelss mouse and wireless keyboard that both have USB interfaces?

Also, any recommendations for a good KVM switch? I would like one that also gives me the option to share my speakers.

Thanks in advance!
EDIT: I've read that it might be better to use PS/2 adapters for the USB mouse and keyboard. Would this be the better option here. I figure this would avoid the systems having to recognize a new USB device every time I switch??? Thanks again.
 

A:KVM Switch controlling wireless keyboard?

I use a Belkin USB KVM switch at home without any problems.

It takes about 5 seconds after I switch before my wireless mouse and keyboard are working again.
 

2 more replies
Answer Match 44.52%

I have an "old" Cisco router that I am no longer using (its not actually very old, and should be in good working condition). I also need a switch for a LAN. Is there any way this wireless router would be able to work? It has 4 ethernet connections in the back as well as an internet connection.

I googled this problem and read something about it working but "MAKE SURE the IP address is different on both networks BEFORE connecting." Has me a bit worried - would hate to mess the network up and pay someone twice as much to fix it as what a normal switch would cost me.

I read a bit more and it sounds like as long as I connect only to the "ethernet" (LAN) connections on the router and NOT the "internet" (WAN) connection I should be fine and it would work properly.

Any help, including the likelyhood that I severly mess something up with the network, is greatly appreciated. I am fairly new to networking but not computers - I am confident I can figure it out will a little bit of guidance.
 

A:Wireless broadband router as LAN switch?

8 more replies
Answer Match 44.52%

Gateway wireless switch is turned to ON but I can't get wireless connection like the other two laptops in my home do.
Geek squad was of NO help, they want to blame on infection , but Kaspersky states my computer is clean. This has happened before and an IT friend of mine fixed it easily , but he has since moved away and I can't find his phone number. Can anyone help me?
Imacimputerdumm.

A:Gateway wireless switch not working!

Hi and welcome to TSF what happens when you try to connect do you get any message,have you set up a network connection on the laptop,have you run the troubleshooter,please try to provide as much info as possible,has it ever been connected to the network

3 more replies
Answer Match 44.52%

I have a toshiba equium with wireless connection but i can not connect it wireless because the wireless compomnent is is switched off how do i switch on? one has to use a combination of key but which one and what next there after?

More replies
Answer Match 44.52%

Please see bottom post for update ~

A:connecting to two networks at once wireless and a switch

Hi and Welcome to Seven Forums,

First off, make sure that you have this type of connection: Modem>Router>Switch>Wired Computers/Devices

Do I have to assign static IPs to all devices?
Yes you may, but you may leave DHCP or Auto IP on your computers and network devices that will need access to the Internet. You may assign Static IP to the ones that won't need the internet connection but will be part of your Homegroup or Workgroup to share and access network resources such as files, printer, etc. Assign a Static IP only on IP Address and Subnet Mask, the Gateway and DNS Servers will be left blank.

Do I have to create a new subnet mask so my PC can differentiate between the two networks?
There's no nees, they will all be on the same Subnet, easier to configure this way and they will all be in one network.

Do I have to set a new default gateway separate from the wireless router?
See the first answer. No need.

Do I require a DNS server?
Again, please see the first answer.

This is all you need and you'll be good to go.

4 more replies
Answer Match 44.52%

Can anyone recommend or know of a review on the best wireless router/switch for a small business network? I'm looking at hooking up 20 computers wirelessly; however it has to be absolutely secure. We will also be buying a firewall...anything to make the wireless environment secure or else we will not move into the wireless network. So any review or recommendation on the best wireless router/switch and firewall, whether hardware of software, that will support the wireless envornment will be greatly appreciated.

ljCharlie
 

A:Recommendation for wireless router/switch

D-Link DI-624
 

2 more replies
Answer Match 44.52%

I work on used/abused Toshiba laptops. On several occasions I have found the physical wireless switch wont operate - even after stripping to and examining the motherboard. In all these cases the internal wireless will not operate: the message "no networks in range" is shown.
I have asked Toshibe if there is a way to make the wireless work when the switch wont, but they are only interested in selling a new motherboard or laptop.
Does anyone know of a way to bypass the u/s switch and get wireless without an external PC or USB card?

Thanks

rjp1

A:Toshiba laptop wireless switch

if there is a way to make the wireless work when the switch wont, but they are only interested in selling a new motherboard or laptop.Why bother to replace when you can just buy a USB wireless adapter?

1 more replies
Answer Match 44.52%

I'm on a asus x71q laptop running windows 7.
Yesterday I was working when suddenly I lost connection. It turns out my wireless button seems to have stopped working. That is, I can slide it back and forward, but all I get is a notification wireless is off. The wireless card is visible in my system, no errors (this device works correctly). cabled internet works fine. I haven't changed anything apart from changing something in tuneup utilities (wired connection from 120mb to 60mb). However, that setting I have already rolled back to the previous one.
Any suggestion/help would be appreciated
 

A:wireless switch stopped working

Sounds like the switch is defective, or the adapter is loose or defective.
 

2 more replies
Answer Match 44.52%

How to I repair the wireless switch on a Gateway LT20 netbook? It is no longer moving and the wireless will not come on.

Thanks for your help.
 

A:Solved: Netbook Wireless Switch

Often it can be dust and gunk collected under the switch that might prevent it moving.
Try using canned air or carefully lubricate the switch.
Other than that you will have to remove the housing to get at the switch to fix or replace it
 

3 more replies
Answer Match 44.52%

My wireless accidentally got broke on my compaq nc8430 is there any other way i can turn my wireless capibility on anything will help because this laptop is the only way i can get my school work done i bout it for school a while back please help.

More replies
Answer Match 44.52%

HiI am running a sony vaio VGN_B1XP using windows xp proffesional.
My problem is every time I switch my wireless lan switch on my computer trips off it flashes a blue page of writing that I do not have time to read.
It then reboots itself. Can anybody help please in basic language as i an not that bright in computer terminology?
Thank you
 

A:Wireless LAN switch keeps cutting computer out

Follow up to start of thread when blue screem comes up is ays the following:

a problem has been detected and windows has been shut down to prevent damage to your computer.
IRQL-NOT-LESS-OR-EQUAL

if this is the first time you have seen this stop error screen, restart your computer. If this screen appears again follow these steps.
Check to make sure any hardware or software is properly installed.
If this is a new installation ask your ask your hardware or software manufacturer for any windows updates you might need.
If problems continue disable or remove any new installed hardware or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart your computer press F8 to select advanced startup options and then select safe mode.
Technical information
Stop )x 0000000A (0x49A58155, 0x00000002,0x00000000,0x80409AFA)

Beginning dump of physical memory
Physical memory dump complete
contact you system administrator or technical support group for further assistance.
If anyone can put theat in laymans terms would be grateful thanks
 

1 more replies
Answer Match 44.52%

I recently bought a WET54G Wireless Bridge. It works great. For those of you who dont know it is a device that connects wirelessly to a router and acts as a bridge with no actual WAP's.

MY QUESTION:

Can you connect it into say a 4 port switch and run more that one device.

For example I want to connect my XBOX360 and a Blu Ray Player.
 

A:Wireless Bridge Device to Switch???

yes you can. you'll need hook them together using a crossover cable.
 

1 more replies
Answer Match 44.52%

I have an Acer TravelMate 290 (running XP) and have recently installed a BT broadband homehub. I initially had no problems accessing the wireless network but then my PC stopped detecting any wireless networks - as though the radio was off. Now I cannot switch my radio on - the switch on the PC is not working at all. The problem began once I brought the PC out of hibernation after having (accidently) switched the homehub off and on.

I have tried uninstalling/reinstalling the BT software, updating the wireless driver (from the Acer website) - all with no success.

Something that may or may not be relevant is that I also recently installed a Logitech wireless keyboard and mouse onto the laptop.

Has anybody experienced similar problems or have any suggestions? Advice gratefully received.
 

A:Laptop Wireless Switch Not Working

try changing the channel your wireless network communicates on.
 

1 more replies
Answer Match 44.52%

I cannot connect wireless I have attempted to bridge connections between my laptop and my desktop before but it would be too inconvenient and I didn't even manage it anyway.

I have a WET200 and want to use it to reach the router like so:

Desktop > WET200 > router > internet

Is this possible? Someone told me that all I needed was a wireless switch. I have tried to connect the device directly into my laptop but I haven't been able to pick up an IP. I am not sure if I am approaching this in the right way. I am pretty sure I did the same at a LAN party years ago.

Cheers.
 

More replies
Answer Match 44.52%

Hi

I have a Toshiba Satellite L25-S119 laptop, a coulpe of days ago my wireless lan would not turn on using the fn+f8 key combination. I checked the device settings and everything is working okay. I checked the bios and the LAN is enable. When I try to use the connection software it says the the wireless LAN is not turned on. (plus the light is not lite up) Does anyone have any ideas how to resolve or bypass this issue.

Thanks
Jim
 

A:Wireless Lan switch not working with hotkey

7 more replies
Answer Match 44.52%

Everything functioned just fine and then one day I turned on the computer and the wireless is turned off and can not be turned on. The switch remains amber and in Control Panel wireless on/off is greyed out and can not even be selected. I found several things on-line regarding this problem but none with a solution that worked. It also appears to happen to at least 4 other models of Elitebook.  Network addapters all are working according to device manager.I get internet access  when ethernet plugged inAs far as I can tell everything is current as far as updatesOne solution that was said to work on another forum was deleting the HP Assistant but I couldn't find it on my computer at all so I installed it thinking perhaps a current version may solve the proplem or overwrite previos copy of assistant. Nothing changed. I have not deleted it as I apparently didn't have HP Assistant prior to installing it myself.OS is Windows 7 (64 bit)Professional Service Pack 1I have not tried BIOS as this was suggested in every similar post I found but wqs never reported to be successful.I have not reinstalled drivers as only 1 was listed on HP website that matched mine which was INTEL 82579LM.The other two drivers were not listed in the downloads. They are; Intel Centrino Ultimate-N6300 AGN and Microsoft Virtual WiFi Miniport AdaptorWhen rightclicking drivers in Device Manager under Properties all three drivers report "Device is working properly" I purchased this laptop j... Read more

More replies
Answer Match 44.52%

like every one it seems I have a HP wireless assistance failure and in device manager, the absence of my broadcom 801.2 wireless card (or what ever the name is) so what I found out is that after I did a factory reboot and cancel Norton, it work. then when I shut down and restarted no more?!? I called thech support, talk to some great guy in india twice downlaoded older version of driver and a bunch of little tiny winy file and nothing. when away for awhile and then got rude of Norton complitetly and it work again))) then shut down after few day then back on and no more but they still was a Norton update pop up.... I use there tool to ride it all but still no blue light when the switch is on. so I belive it as nothing to do with the mother board and since it disapear complitly as if no hardware it a virus to block the wireless access that somtime gets fooled. how to reinstall the whole set up??
thank to whom can help and hope you profite from the help to all.
regards. )'(
 

More replies
Answer Match 43.68%

Hello all,
I've used the internal wireless (1397 mini-card) for a couple of years now...All of a sudden the WIFI LED is not lit up above my keyboard....Win 7 reports no problem with the card and the driver appears to be ok...Others have told me to try the FN + F2 key to turn the wireless switch back on, but this combo doesn't change anything...In fact, on my laptop that combo controls whether the AC adapter charges the battery or not while plugged in. 
I booted into my XP dual boot real quick...ON this OS the wireless is controlled by the dell application and the dell software says the wireless radio switch is disabled? Everything is enabled in the BIOS under the wireless section...It must be a different key combo to turn my wireless on/off?
I plugged in my wireless dongle from another machine and everything works great...
Any ideas?

A:Latitude E5500 Wireless Switch turned off?

Okay everyone,
I just solved my own problem....I can't believe I did not know where this switch was and what it does....As soon as I posted I found a site that has the right information for this laptop....On the E5500 the FN key has nothing to do with the wireless switch on/off.I literally burned through 50 sites with everyone saying "just hold down FN and press F2"...I don't know why everybody has the wrong info about this laptop.
There is a toggle switch on the front of the laptop(just on the underside of the keyboard plane)...It's about where your left wrist sits when you are typing on the keypad...It has a wireless Access point symbol on the switch...It looks similar to this:::::
 
Here is a picture from the site:::
 
 
In this diagram, the number 7 is exactly where the toggle switch is to turn wireless radio on/off. Maybe this post was a little overkill, but I was about to tear my hair out trying to figure out why my darn wireless wasn't working. I hope this helps anyone who reads it.
 
Thanks,
Ron
 

18 more replies
Answer Match 43.68%

How do I switch the wireless part of the network adapter on? i.e. I can only get an internet connection via LAN cable - wifi got switched off and I can't remember or find how to switch it back on..

More replies
Answer Match 43.68%

Trying to Locate Software that allows me to Easily Switch from My Sound Card (Creative Labs Sound Blaster X-Fi Titanium Fatal1ty Professional Series) to my Logitech Wireless G930 Headset, without the Hassle of Manually changing the Defaults.
My current OS: Windows 8.1 Pro 64-Bit
a couple of years ago,  I got a link for a Software Gadget from Here:  "QuikSwitch" which apparently doesn't exist anymore.

A:Switch Over from Default Sound to Wireless Headset

Answering My Own Post, 
Found: "Sound Switch v2.03" Works Fantastic, and it's Freeware. 
I have noticed some Users discussing picking up a Virus, Mine was Clean, as Always Use a Reputable Download Site, and Scan BEFORE Installing.
I can Now Easily switch Between my Main Speakers, and My Headset with 1-click.
 http://soundswitch.codeplex.com/

1 more replies
Answer Match 43.68%

Wireless not working on my dv6000 laptop. (RP963EA#ABB) - a dv6103eu. Like many of the frustrated customers, one day that light on the wireless signal readout simple went orage no matter where to toggle it. I updated all Microsoft updates and every single driver update on the HP site for my exact model, dv6103eu. I even updated the BIOS to F.3D (11/22/2007) which is the latest on the HP site for this model. Nothing worked. I completely restored the machine to factory defaults thinking that perhaps it was a driver issue. To my complete surprise, the light is still ORANGE! I resetted the wireless card and reinstalled. Nothing. I took my wireless card to another dv6000 laptop and it requested for drivers to work so the wireless card works. What can HP for me? I am like most HP customers frustrated at this issue especially when most of the threads on this forum seem to go unanswered. PLEASE HELP!

A:Wireless switch orange NOT blue on dv6000

HP is in denial. After a month of messing around with mine, I spent $150 to have it diagnosed. They wanted to replace the mother board for around $400. But they were kind enough to tell me that I could get wifi with a $20 USB wifi. My machine was 3 weeks out of warranty. Within the next 2 months my other 3 laptops had the same issue. Also out of warranty... HP was virtually useless. They said that nobody else had those problems... 3 of 3??? I smell a recall...

9 more replies
Answer Match 43.68%

I have an Aspire One netbook with the wireless on/off switch in the front right position. It has stopped responding, and now I have to go into network connections every time I want to enable or disable wireless. A minor annoyance, but if there is an easy way to get the switch working again, I'd appreciate any help. Windows XP.
 

More replies
Answer Match 43.68%

I have connected a cable modem and a wireless router linksys with 4 ports in my network; but I need to connected 2 PC more wired.
What can I do?

Thanks for any advance?

A:How connect modem; wireless router and switch together?

  
Quote: Originally Posted by elnene


I have connected a cable modem and a wireless router linksys with 4 ports in my network; but I need to connected 2 PC more wired.
What can I do?

Thanks for any advance?


The modem needs to plug into the WAN port on the router first.

If the router has 4 ports just plug the 2 machines into the LAN ports on the router.

You can also add a switch with more LAN ports which you would plug into the routers LAN port using Ethernet cable.

2 more replies
Answer Match 43.68%

I have a sony vaio model: vgnar630e, Vista 32 home premium, Had a malware infection which prevented me from accessing any software. I managed to remove them using guidelines from majorgeeks site. It fixed the problem, I think except the wireless switch in front right side of laptop came on briefly then went out again soon after going through the last step of of malware removal process using MGtools. I have updated all drivers. Gone to intel site to update wireless driver with most current, downgraded back to sony original driver, removed all third party wireless lan utilites and it still does not work. Called sony, my system is out of warranty and they are charging over and above what I can afford. They know the problem but will not fix it until I cough up enough dough. Any help to get to the bottom of this will be highly appreciated.Thankscape

More replies
Answer Match 43.68%

My wireless switch in my hp probook 4530s won't turn on. The amber light stays on, and I can't connect to my wireless network.

A:wireless switch doesn't work on 4530s

i have the same problem last week. Luckily, I was le to solve to problem. Maybe it was also disabled in our BIOS system. Restart your laptop then press F10 in order to go to your BIOS system. Just Press the defaults and SAVE . Press ok,close then restart. Hopefully this will help. Goodluck!

6 more replies