Tech Problem Aggregator

Hp folio 9470m Bios Pass

Q: Hp folio 9470m Bios Pass

hi can someone help me please with bios password for my folio 9470m i cant remember it plzz someone help me

A: Hp folio 9470m Bios Pass

Hi @ARtan-Krasniqi? Welcome to the HP Support forum. Thank you for posting ! Folio is a lovely business class notebook. Most business class notebooks (including yours, Elitebook and Probook, etc...) have better security than consumer class computers. You will have to contact HP Support for business for assistance on removing the password. Here is how >> http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html>> http://www8.hp.com/us/en/contact-hp/business-support.html HP Business support should be able to send you a customised SMC.bin file and instructions which you can use to reset the password. Hope this helps. Let me know if you face any issues.

1 more replies
Answer Match 104.16%

I am the owner of a used Elitebook Folio 9470m laptop that I procured from my friend. It is very lightweight laptop, and I really love it.Unfortunately, the laptop came with admin password on the BIOS. I already contacted him, and he has no idea what it is. This was his father laptop, and he also has no idea about it. So, I'm left here with this laptop, but no way to tinker around with the BIOS. Obviously this isn't good!All sources lead me to this area where can I contact HP support to try to solve my problem.  I opened up two cases.  First one, case ID 4779632926 and did not get response. Second, 4779725521 and this is response i got. " I  really apologize for the inconvenience, unfortunately we will not be able to support this case."  I tried to reply to this case with subject <4779725521> and then I received message that case is closed. We are sorry, but we were unable to process your request.

The Case with ID "4779725521" is closed or does not exist and cannot be updated. PLS if there is any chance to solve this, let me know.  I can provide any information you need. Thank you.

More replies
Answer Match 104.16%

I bought this second hand HP Folio 9470m Elitebook and I am stuck at the BIOS password. I cant install an operating system on it as the secure boot is on and to disable it i need to entyer BIOS. Please help. I havent tried the password as i dont want it to be locked. I can provide the seriel number if required. Thanks heaapsss in advance.

More replies
Answer Match 104.16%

I cant Update My Hp Foilio 9470m Bios Driver he ask me to enter the password i try my adminitrator password but its not working my biomatric sensor not working for troubleshooting biomatric sensor i need to update my bios driver but i cant do this without password  is any one there who help me plzz.....

A:Hp Folio 9470m Bios Password Missing

@Us123 For that model you will need to contact HP and they should be able to send you a customized SMC.bin file which you can use at boot to reset the password.  http://welcome.hp.com/country/w1/en/contact_us.html When talking to the HP rep ask them to escalate your service request. REO

1 more replies
Answer Match 102.9%

Gurus, Will someone help me in getting the Bios Administrator Password for my HP EliteBook Folio 9740 with SN: CNU313CK1B Appreciate your help Regards,TR 

A:Bios Administrator Password for HP EliteBook Folio 9470m

Hello Tejas, We would need the screenshot of F1 screen. To generate smc.bin file. best is contact HP chat support or phone support and send the f1 screenshot, they will generate in 10mins and provide it to u.




Regards;SmileyI am an HP employeePlease click the White Kudos star to say thanks for helping.Please mark Accept As Solution if my help has solved your problem.

1 more replies
Answer Match 85.68%

Hi Guys.

I have a fresh image of Windows 7 on my laptop but it will crash frequently when connect to a VPN.

I have only tested this over WIFI and have yet to test over a wired connection.

I have attached the correct file but I think some files may be missing as I can't seem to get the Diagnostics Tool to do a full run through.

Any help would be appreciated

A:BSOD When Using VPN on HP Folio 9470M

Hi BinaryStar0647.

Your BSODs are caused by Sunbelt Personal Firewall driver, a regular BSOD causer which is disconnected from the market from December 2011.

Seeing your files I realized that the drivers are used by some other thing, GFI Software Firewall.

ITEMVALUEName [00000016] GFI Software Firewall NDIS IM Filter MiniportAdapter Type Ethernet 802.3Product Type GFI Software Firewall NDIS IM Filter MiniportPNP Device ID ROOT\SB_SBFWIMCLMP\0000Driver c:\windows\system32\drivers\sbfwim.sys (5.2.51.0, 117.78 KB (120,608 bytes), 15/08/2013 10:37 AM)
And it is the driver that is failing here.

Code:
fffff880`0358c670 fffff880`00df2110Unable to load image \SystemRoot\system32\DRIVERS\SBFWIM.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SBFWIM.sys
*** ERROR: Module load completed but symbols could not be loaded for SBFWIM.sys
SBFWIM+0x1a110
And not alone, but with other components too.

Code:
fffff880`0358c408 fffff880`046aadd3Unable to load image \SystemRoot\system32\drivers\SbFw.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SbFw.sys
*** ERROR: Module load completed but symbols could not be loaded for SbFw.sys
SbFw+0x11dd3
I would suggest you to uninstall GFI Software Firewall.

Let us know the results.

2 more replies
Answer Match 85.68%

HiNot sure if my post was noticed as posted over weekend and got no reply so I'm trying again.Trouble started with random system restarts anywhere from 2 to 60min after powering on. That lasted a few days. Than it got worse, it was stopping before system boot with error message: motherboard product information missing. After a soft or hard reset (can't remember now) it stopped displaying anything, only LEDs came on and fan run, all lasting about 5s. I tested RAM in other machine, OK. Pulled HD out, no difference. Put a different HD in, no difference. With DC disconnected and battery out I left CMOS battery disconnected overnight. Now it cycles: LEDs and fan come on for about 5s, all off for 1s and tries again. Any help will be appreciated... Best regards

More replies
Answer Match 85.68%

Trouble started with random system restarts anywhere from 2 to 60min after powering on. That lasted a few days. Than it got worse, it was stopping before system boot with error message: motherboard product information missing. After a soft or hard reset (can't remember now) it stopped displaying anything, only LEDs came on and fan run, all lasting about 5s. I tested RAM in other machine, OK. Pulled HD out, no difference. Put a different HD in, no difference. With DC disconnected and battery out I left CMOS battery disconnected overnight. Now it cycles: LEDs and fan come on for about 5s, all off for 1s and tries again. Any help will be appreciated... Best regards

More replies
Answer Match 84.84%

HI, I have an EliteBook Folio 9470m running WIN 8.1 Ent 64-bit. I have an issue with the Touchpad not working. I have installed the latest driver (sp66111) from HP Support and as a result only the PointStick and associated buttons work and not the Touchpad. Has anyone experienced this and if so what is the fix please? Incidentally, the Touchpad was working at one stage on this OS and ceased to work afterwards. I have re-stalled the OS from scratch withpout success either. Thanks in advance, Vik

A:Folio 9470m Touchpad Not Working

The touchpad might be turned off.Double tap on left top corner of the touchpad to activate/deactivate the pad.Also goto Control Panel>Mouse>Device Settings> Click on the touchpad/Luxpad>Click settings and check the settings.If this dosnt resolve then reinstall drivers from hp.com or from Recovery Manager.Using Recovery Manager to Restore Software and Drivers:http://support.hp.com/us-en/document/c03430118

5 more replies
Answer Match 84.84%

What's the Max SSD I can upgrade go on HP Elitebook folio 9470m . i7 -3667u, 8gb ram ?

A:Max ssd upgrade for HP Elitebook folio 9470m ?

256Gb is the tested capacity.I would expect it to work with greater capacity though.here are the quickspecs:http://www8.hp.com/h20195/v2/GetPDF.aspx/c04111459.pdf 

1 more replies
Answer Match 84.84%

I just recently purchased a Samsung 500GB SSD and I want to add this drive to my existing storage on my HP EliteBook Folio 9470m. The laptop currently has 256GB of SSD stock on it and I'd like to add an additional 500GB. I see that there is a connection that I'm missing. Anyone have the exact part that would service this connection?  Or try this link if pics don't show up  Pictures of what I'm referring to on my notebook  Thank you all!!  

More replies
Answer Match 84.84%

We have 2 x Folio 9470m notebook. 1st has 8GB of memory with the upgraded ram using https://www.skhynix.com/eolproducts.view.do?pronm=DDR3+SDRAM&srnm=HMT451S6AFR8A&rk=20&rc=module  The 2nd only has 4Gb of memory and want to upgrade - I found this other memory cheaper - https://www.skhynix.com/eolproducts.view.do?pronm=DDR3+SDRAM&srnm=HMT351S6CFR8C&rk=20&rc=module  My understanding is the main difference is the what I already have is the Low Power (1.35V vs 1.5V). Does anyone know if Folio 9470m will work with this 1.5V version of the memory? Thanks for your help.

A:PC3 vs PC3L memory for Folio 9470m

From the Service Manual: Two customer-accessible/upgradable memory module slots DDR3 PC3-1600-MHz dual channel support Supports 16384-MB of system RAM in the following configurations: ? 16384-MB (8192-MB×2) ? 8192-MB (8192-MB×1 or 4096×2) The specified memory is 1.5 volt. DDR3L will run at either 1.35 or 1.5 volt but I generally avoid mixing voltages. That is why the DDR3L is working for you and I assume you have 2 of the same in the laptop with 8 gigs.  Can you figure out what is in the 4 gig machine now? I would not mix voltages or density...i.e would not have one module with 8 black blocks and one with 4. Try to match the existing 4 gig module is what I am saying...not the exact brand of memory but the characteristics of it. 

1 more replies
Answer Match 84%

Hi all,  I have a quick question. Recently I bought HP Folio 9470m from my friend. It came with HP original charger 18.5V | 3.5A 65W but when I looked under the battery on my laptop it says 19.5V | 2.31A  I google about replacement charger fo Folio 9470m and there is allot of it with 18.5V | 3.5A 65W.  My question is, how can I be sure tahat this is the right charger? If it is not, can this diference in Voltage damage my laptop?  













Solved!

View Solution.

A:Right charger voltage and amperage for HP Folio 9470m

MaxLAB wrote:Hello banhien, thank You for Your fast reply. Product number is: D3Q03AWHi, Thanks. I can see part # from your photo. It is not a right part, no idea what is it:               http://partsurfer.hp.com/Search.aspx?SearchText=608425-002 but this one            http://partsurfer.hp.com/Search.aspx?SearchText=609939-001 is used for more than 200 products and I can't find yours on the list. Regards.

5 more replies
Answer Match 84%

Hi, after updating my HP Elitebook Folio 9470m to Windows 10 Pro 64, I am no longer able to shot down the PC.Every time I am trying to do a shot down, the windows screen turns into black for a few seconds and than reappears.I already did install the BIOS update version F.62 REV: A PASS: 1, as someone on the net said a BIOS update would help.Unfortunately this was not a solution. Thanks for your help

More replies
Answer Match 84%

Hi, Appreciate if you can propose workable WWAN Card module that can operate and have the 4G/LTE functional in Malaysia. I'm using the HP EliteBook Folio 9470m with Windows 10 Professional (64-bit) installed on-board. I hv surf through and the only recommended WWAN Card is HP hs2350 HSPA+ Mobile Broadband Module which limited to 3G coverage. Is HP lt2522 LTE/EV-DO Mobile Broadband Module- U.S. only* (no Win 8 support), workable in Malaysia i.e,  Kuala Lumpur?  Rgds,Firdaus

More replies
Answer Match 84%

Hi Team, I need Need SC.BIN file for HP EliteBook Folio 9470m Ultrabook. My Product Number is: D4R81UC#ACJ Kindly help me. Thanks,Abhiram

More replies
Answer Match 84%

Hi, I work in tech support for a company and one of our enterprise laptops mysteriously has lost its "tattooed" information.  The user who had this laptop left the company and when we went to wipe it we discovered this issue.  Upon starting the machine the HP splash screen has in red text on the top left of the screen "Manufactoring Program Mode set 1 of 10" after the splash screen a "Product Information not Valid" screen appears.  It reads: Product Information not validThe following product information programmed into the system board is missing or invalidSYSTEM BOARD (00A)Product Name Product Serial NumberProduct SKUProduct FamilySystem Board CT NumberENTER - Continue Startup For more information, please visit: www.hp.com/go/techcenter/startup I know that there is an HP utility tool to "tattoo" this information back onto the machine.  As an enterprise that uses 95% HP equipment (our monitors, mouse, keyboards are the only non-HP equipment) I think that the tech support deserves these types of tools to troubleshoot issues.  Sure the machine boots normally if you hit enter, but it's alarming/scandalous to be presented with that product information not valid screen when powering on a machine.  Bonus points to whoever can provide some reasoning as to how this occurred.

More replies
Answer Match 82.74%

hi everyone, i have a trouble with my laptop HP folio 9470m win 7 Pro 64 bit. that's about error BSOD of my laptop . Please help me, thanks so much

Attachment 341519

A:BSOD error Ntoskrnl.exe win 7 Pro 64 bit laptop HP folio 9470m

Please continue on your previous thread.

http://www.sevenforums.com/bsod-help...exe-87f7e.html

1 more replies
Answer Match 82.74%

card reader in hp folio 947m not work in windows 10 

A:Folio 9470m card reader issue in windows 10

@zubair044? Try installing this. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5271102&swItemId=ob_166654_1&swEnvOid=419... REO

3 more replies
Answer Match 82.74%

Hi everyone, I have a trouble with my laptop HP folio 9470m win 7 pro 64bit . Please help me , thanks so much
 

A:Ntoskrnl.exe cause BSOD laptop HP folio 9470m win 7 pro 64bit

Try testing the hard drive and the memory. To test the hard drive go to Computer and right-click on the C drive, select Properties, tools, check now. Set a disk check on the next start up. Let the check finish. To test the memory go here:
http://www.memtest.org/
Download version 5.01 and burn it to a CD or DVD. Boot the laptop with this disk and run Memtest86 for at least 7 passes. No errors are allowed...
 

1 more replies
Answer Match 82.74%

I am experiencing the following issue and hope that someone in the forum as an idea / suggestion. When I have the screen connected via via display port cable with the docking station and I have my laptop docked, I dont get any signal and the screen keeps black. This is independent of the Operating System - I used Windows 7, Windows 8. When my laptop is docked but I attach the display port cable directly to the laptop it works without any problem. I have also realized that with other displays 23'' or 24'' the setup with the docking station works without a problem. So it has to be a cominbination between UltraSlim Docking Station and ZR2740w screen. Any advise what else should be tried?











Solved!
View Solution.

A:HP ZR2740w and HP Folio 9470m / UltraSlim Docking Station

Update:  After calling HP technical support I and being bounced among various clueless offshore tech support reps, I finally landed on the US-based workstation support department.  Justin looked up the problem and identified it as a known issue and is replacing my monitor cable with one that HP says will work.   Also, in the meantime there is a workaround that I had figured out.  If you don't use the displayport port on the ultraslim docking station but pug the cable directly into the computer it works fine.  There is some inconvienence associated with this as you have to plug it in every time you dock and unplug it every time you undock (and of course the cable always falls behind the desk while you are doing this), but it is okay as a solution while I am waiting for the new cable to arrive.  Will update this post after it arrives and report whether it works.

10 more replies
Answer Match 82.74%

when I connect the laptop to the power network 220V or the battery laptop switches on itself (without push the power button).How Fix it?

More replies
Answer Match 82.74%

Anyone with a clue on how to solve this problem

More replies
Answer Match 82.74%

Anyone with a clue on how to solve this problem

A:hp notebook folio 9470m product information not valid

Can you take a picture of message?




I am an HP employee.

1 more replies
Answer Match 81.9%

Hey I cant install driver of bluetooth and mobile broad band for my HP folio 9470m in windows 10 64 bit OS plz help me out i try windows 8.1 drivers but they did not work.

More replies
Answer Match 81.9%

Hello, After upgrading from Win7 to Win10, my system got stuck when uninstalling MS Office, and nothing worked anymore (File Explorer etc.). I tried to make a factory reset, which got stuck, too, and no OS would be detected anymore. Then I tried to reinstall Win10 64 bit, which brought be a bit of trouble. I have an HP Folio 9470 with a 320 HDD and a 32 GB (I believe) mSATA. During my Win10 reinstall, I ran into trouble and then deleted all partitions on both drives and reformatted everything because I thought that was the method for a clean reinstall. First, I installed Win10 on the 320 HDD, but my BIOS did not appear to allow this (although harddisk was in the legacy boot options), which the Win10 installer had already warned me about, so I could not boot from my HDD and thus could not start Win10. Next, I reformatted everything and installed Win10 on my mSATA. However, the Win10 installer and later Windows 10 only showed a size of 11GB for the mSATA. The installation itself already took up 11GB and there was no space left for necessary drivers and updates, and Windows 10 malfunctioned. My feeling is that the mSATA was larger than just 11GB, but that a part of it is not shown any more after deleting partitions and reformatting. After multiple reinstalls, I do not know what to do any more. Any idea what how I might get a functioning version of Windows 10 on my HP Folio 9470m? Best regardsFrank

More replies
Answer Match 81.9%

Hello, After upgrading from Win7 to Win10, my system got stuck when uninstalling MS Office, and nothing worked anymore (File Explorer etc.). I tried to make a factory reset, which got stuck, too, and no OS would be detected anymore. Then I tried to reinstall Win10 64 bit, which brought be a bit of trouble. I have an HP Folio 9470 with a 320 HDD and a 32 GB (I believe) mSATA. During my Win10 reinstall, I ran into trouble and then deleted all partitions on both drives and reformatted everything because I thought that was the method for a clean reinstall. First, I installed Win10 on the 320 HDD, but my BIOS did not appear to allow this (although harddisk was in the legacy boot options), which the Win10 installer had already warned me about, so I could not boot from my HDD and thus could not start Win10. Next, I reformatted everything and installed Win10 on my mSATA. However, the Win10 installer and later Windows 10 only showed a size of 11GB for the mSATA. The installation itself already took up 11GB and there was no space left for necessary drivers and updates, and Windows 10 malfunctioned. My feeling is that the mSATA was larger than just 11GB, but that a part of it is not shown any more after deleting partitions and reformatting. After multiple reinstalls, I do not know what to do any more. Any idea what how I might get a functioning version of Windows 10 on my HP Folio 9470m? Best regardsFrank

More replies
Answer Match 81.06%

So i'm using a Folio 9470m at work on a 2013 Ultraslim Docking station with 2 Display Port connectors, but if i attach two screens to those it only displays them as one device and mirrors the image on both screens. Furthermore if i go into the screen and resolution settings, both identify as screen 1, but i can set 3840x1080 instead of 1920x1080 and at that moment the picture will span over both screens as one. The downside to this is that the login screen, windows i open for the first time, they're all gonne appear in the middle where the bezels are, it handles them as one bigger screen and not as 2 screens that extend each other. I need them to be detected as 2 seperate screens, and so far i have had no success. Has anyone experienced this or knows a solution? I really don't want to connect the second screen via VGA. Can the folio handle 2 display port connections on a dock? Is this maybe the cause?

A:Folio 9470m DUAL Display Port on HP 2013 Ultraslim Docking S...

As far as I know the  Folio 9470m doesnt support more then one external display.  I think you can verify this by having a look at the quickspec document for the model.

3 more replies
Answer Match 64.68%

How to reset bios password with smc.bin file? I following instructions from HP support but still not success - as far as I undestand I cant enter into mode to let system read smc.bin file - anybody can help with that? After F10 I have been asking for password that is unknow and stop at that point :/ Any help will be welcome.

More replies
Answer Match 62.16%

Latest BIOS version 1,09 was last week removed and seems rolled back to version 1,06.How is this affecting comapitibilty with firmware for USB-C Docking station ? Why was the rollback made and what functions differs from 1.09 to 1.06 ? When will a new version for Bios be available ?(since version 1,06 have known issues with docking capability this seems as not an option for our new platform)

More replies
Answer Match 60.9%

I have a very noisy fan and was advised to update the Bios.After giving all the info etc the only operating system options that came up are Windows 7 and 8. But I haveWindows 10. How can I update Bios on Windows 10 please? 

More replies
Answer Match 60.9%

I do not have the BIOS password for my second hand Folio 13-2000 laptop. When trying, I am getting System Disable 58901368. How to solve this?










Solved!
View Solution.

A:Folio 13-2000 bios password reset

Steps to be followed:1. Use the unlock code posted above to enter the BIOS2. Disable all passwords that are enabled3. If asked for current password - type the unlock code4. For new password, just press ENTER key5. Repeat the same for verify password column.6. Then leave the BIOS by saving & exit option to save the changes.Troubleshooting:Incase if the Password doesn?t work please try a Hard Reset as follows.1. Shut down the notebook2. Unplug the AC Adapter and then remove the battery3a Hold down the Power button for 30 seconds4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook5. If you now see a password box, Please type the same Password I shared before and press enterHope this helps, for any further queries reply to the post and feel free to join us again**Click the 'White Thumbs Up Button' on left to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

4 more replies
Answer Match 60.9%

hellothe bios of my folio 1040 g1 is corrupted and the system can't bootso i want a full bios image for reprogming  the bios shipthank you

More replies
Answer Match 60.06%

Hi! I recently bought a new laptop, i'm very happy with it and it works fine! Although, now i need to access the BIOS Password, something that the previously owner dont recall setting ( A School ) Does anyone know any way to reset/recover the BIOS password to this model, without buying a new motherboard/BIOS Chip or ''Contact HP Support, because they probably need a proof that it's not stolen?I didnt get any receipt from the School that they've bought it, Anyone got any ideas?

A:HP EliteBook Folio 1040 G1 BIOS PASSWORD FORGOTTEN

Hello @OskarB98? Welcome to the HP Support forum. I am afraid that there is no other options other than HP Support for business. Most business class notebooks (including yours Elitebook and Probook) have better security. You will have to contact HP Support for assistance on removing the password. Here is how >> http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html>> http://www8.hp.com/us/en/contact-hp/business-support.html HP Business support should be able to send you a customised SMC.bin file and instructions which you can use  to reset the password. I am sure they do not need any kind of proof - just be somewhat pushy. In order to generate this BIN file they will need your serial number, product number, UUID, etc... found in the startup menu (F1) .  Hope this helps. Let me know if you face any issues.

5 more replies
Answer Match 55.02%

System Disable Code 82313221

A:BIOS PASS

Hi Try : 33071807

2 more replies
Answer Match 54.18%

Please Help! It requires the administrator password after reset CMOS  battery.... after three attempts at entering the password and writes the number " i 86638592" what should I do?

A:Help Me! Notebook HP, Bios pass

 Hi, Enter: 39790514

6 more replies
Answer Match 54.18%

Hi same issue, need pass also. ThanksSystem disabled Code = 85492810 

More replies
Answer Match 54.18%

Can someone please help me because i dont know my bios passwors for hp probook 4440s and their is no system disabled message

A:Can someone please help me because i dont know the bios pass...

Hi, Unfortunately,  business machines such as Probooks or Elitebooks have more stringent security than consumer models - they don't produce 'halt codes', the password cannot be derived from the Serial No. and the code is stored in non-volatile memory so removing the RTC cell will not reset the password in this case. If you Contact HP Business support they should be able to send you a customised SMC.bin file which you can use at boot to reset the password. Regards, DP-K

1 more replies
Answer Match 54.18%

problem - dell computer boots up to "Dell Logo" screen, the "status bar" on that screen that normally goes across does not move at all, it does not even begin to move, it is stuck there, computer will not recognize any external devices such as mouse. keyboard, so i can not get into bios settings, and can not boot from a cd or usb
 
things i have tried....
 
- unplug computer hold down power button for 60 seconds
- remove cmos battery and jumper pins, let computer sit for hours
- replace cmos batter with known good battery
- replace power supply with known good power supply
- remove ram sticks
- clean ram sticks/slots
- replace ram sticks one at a time trying both slots with both sticks
- disconnected EVERYTHING from motherboard except fans, power, and ram
- tested hard drive, it is 100% okay
 
all of the above give the exact same result, nothing changes,
 
is it safe to assume this is a motherboard issue?
 

A:Dell Will Not Pass Bios

Can you boot into Safe Mode?
 
Do you see the BIOS splash screen when the computer is booting?

15 more replies
Answer Match 53.76%

Hi,

i would be gratefull if somebody can give me the bios password .
My hascode is 00589

thnx in advance.
 

A:Hp Omnibook Xe4500 Bios Pass?

Please try
Clear CMOS
http://www.esupport.com/techsupport/UTILS/clrcmos11/clrcmos.exe

This will need to be run from a startup floppy or boot Cd
It will clear out the cmos fully (and hopefully your password)
 

3 more replies
Answer Match 53.76%

Last week a freinds give me a Dell d620 with a bios pass , i remove the 2 battery and wait for 2days ,i search for jumpers to ereas the pass but no way i d'nt found any thing
It give a gray screen with this "...you can not access the data ... #FPQLL2J-595B
I have never see this before.
If anyone can help me out i would be so grateful.
Thanks in advance
 

A:Help with Bios pass for dell d620

Good luck. I do not know of any Dell more difficult to fix than a Dell Inspiron d620. It is known as unrepairable on this forum, when an unknown password is the issue. Tell us exactly what you men by "...with a bios pass..."? Did they give you an incorrect password?
The EEPROM that holds the password is not replaceable due to soldering issues, and the programming of it is different than other Dells so that an experienced EEPROM programmer cannot deal with it either. The shorting techniques used to delete other Dell passwords do not work with the D620.
 

10 more replies
Answer Match 53.76%

Have HP -15f010wn with forgotten bios pass getting :70052673 after 3 failed attempts . Hdd went bad and cant select boot.  I have removed ram and coin battery.? Any reply is thanked!!




AB








Solved!
View Solution.

A:HP 15 notebook BIOS pass reset?!

@abgunman007? Enter   65930275 Regards, DP-K

4 more replies
Answer Match 53.76%

hi ppl i have a coupla questions for soft pro's, k , i would like to make an emegency floppy disk to recover passes for win xp, one way is to make own app and run it in bios then edit registry and change the pass or the easier way , there is such program called Norton Ghost what u have to do is install it on your pc make a backup then save it and make a recovery floppy disk , then in case if your windows crashes u can restore all your backed up files very fast, in like 10 gb in 1 min, so the easy way would be to, for ex create a user named "test" with blank pass then back it up and save it, now comes the hard part of this , u have to edit the backup file , probably in hex ,so u have to delete all the strings just leave the registry key that has the "test" username with blank pass that would probably weight about 1 mb max, so then all u gotta do is insert floppy reboot and u have acces to the system , so if any of u guyz can help with editing the backup file and making this beautiful pass cracking thing come true plz email [email protected]
 

A:Bios-Registry-Pass Recovery

Well I can be very honest with you right now, that since it sounds to me like you are trying to do this to break into others systems, you won't be getting very much help here.
 

2 more replies
Answer Match 53.34%

Pavilion TouchSmart 11-e010nr Notebook PCE2S18UA#ABALaptop is bricked with no OS, no recovery partitions, and no BIOS. When booted the screen is blank and caplock blinks twice confirming BIOS error as per HP documentationWent to product page http://support.hp.com/lamerica_nsc_carib-en/drivers/selfservice/HP-Pavilion-11-Notebook-PC-series/53... and downloaded BIOS recovery file to generate HP_TOOLS USB with BIOS image. Performed Win+B boot for BIOS recovery but receive the error "BIOS image file specified did not pass validation". Downloaded several "previous versions" of BIOS available on support site but still receive the same error.Accessed USB on functional Windows machine and found the following in "\Hewlett-Packard\BIOSUpdate\HpBiosUpdate.log"10/07/16 09:15:46  EFI HP BIOS Update 3.1.3.0 Started10/07/16 09:15:46  HP BIOS Image Interface Protocol Version 2.010/07/16 09:15:46  BattInit: Protocol 2010.10/07/16 09:15:46  All Required Protocols Located10/07/16 09:15:46  System ID: 217810/07/16 09:15:46  HpBiosUpdate.Mode = 410/07/16 09:15:46  Current Directory = HEWLETT-PACKARD\BIOSUpdate\10/07/16 09:15:46  SMBIOS Init Success10/07/16 09:15:46  SystemFamily = 210/07/16 09:15:47  PlatformLang reported as en-US.10/07/16 09:15:47  Language Selected is currently (eng).10/07/16 09:15:47  Starting BIOS Update Process10/07/16 09:15:47  Setting BIOS Update Token10/07/16 09:15:47  Getting BIOS Detail Information10/0... Read more

More replies
Answer Match 53.34%

Hi all. Went to boot up my Acer this evening to no avail. I can see it start to cycle through searching the DVD drive and see the read/right red LED light for the hard drive go on for about 5 seconds, then nothing. No BIOS test pass beep. I know that it beeps once for passing, then continues to boot. I hear the fans going. but that's it.

I took the side panel off and reseated all the connections including the Mem strips. At one time I left a strip out intentionally for a continuous beep, which is what it's suppose to do.

It was running great earlier today. Shut it down with the physical power button as I always do.

I'm searching the Inet to no avail. Any thoughts?

A:Acer > no BIOS pass test beep

Nothing on the monitor? No BIOS POST screen?
Here is what I normally do in a situation like this.
Unplug anything not needed for the PC to POST, all you need is the bare minimum.
Power supply, motherboard, CPU with heat sink, one stick of RAM, Video card (onboard if it has it), Monitor and keyboard.
If it will now POST add parts back in one at a time until it quits again. If it won't POST start swapping parts. I'd try a spare power supply first. Then Video Card, and RAM etc.

8 more replies
Answer Match 52.5%

I just acquirred a Compaq/Hp laptop model nc8230, This was bought on Ebay in the USA and posted to me in the UK. This was bought with other laptops and all was fine except this one has a bios password. I think it is one of the newer type bios security because unplugging the bios battery for hours on end doesn't get rid of the power-on bios password.

As soon as you switch it on, you get a blue box with the legend
"Embedded Password Security" with the picture of a key. You get 3 tries to get it right before you have to power down, the power-on again to have another go. There has to be a backdoor password here, but I can't guess it. I am desperated to get this machine running .

Can anybody out there help?
 

A:Bios Power-on Pass Word On Compaq / Hp Nc8230

COMPAQ nc8230 PSW HELP!

Hello; Sorry to bother you but i read your post in regards to the laptop you had/have with the locked bios, i was wondering if you had found the backdoor pswd for it... i am stuck with the same problem you have/had and need some help.

If you would be so kind as to tell me where you found the pswd or even provided me with it, that would be awesome. Bought the laptop on ebay from a liquidator and they have no clue as to what the pswd is.

Thanks,
-Sal
 

2 more replies
Answer Match 52.5%

I want to get into my BIOS and I dont know a password. I bought a new PC recently and its first time for me getting inside of BIOS on my new PC. I checked books I got with PC and there is no password inside, maybe I missed it. I dont know.

Any suggestions? Thanks!

A:I want to get inside of my UEFI BIOS 4 1st time and I dont know pass!

have you called the store that you bought it from?
you can also clear the cmos .

scrooge

4 more replies
Answer Match 52.5%

i currentky have a asus x550c notebook.the only thing that pops up is a blue box asking for bios password how do i bypass or clear password so i can get in bios.thank you

A:how do i clear or by pass a bios password for asus x550c not

Security measures on notebooks etc are getting tough in order protect the owner if they get stolen. This general stuff found on google is about as far as I'm personally prepared to go:http://www.computerhope.com/issues/... Always pop back and let us know the outcome - thanksmessage edited by Derek

3 more replies
Answer Match 52.08%

My Win 7 start up has changed. Now the BIOS/Boot option  info page which normally stays for 1 second so unable to read it now stays on and I must press F1 to proceed. Then it displays the Choose OS page which has nothing but Win7 on it. How this change happened is a mystery.
 
I have no password to get to the desktop straight away which I want.  How to stop the BIOS page displaying until I press F1 and to bypass the Choose OS instruction?
 
Any help please.
 
 

A:Start up goes thru stationary Bios info page and 'Choose OS ' How to pass up?

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

6 more replies
Answer Match 52.08%

Hi, a student of mine owns a compaq mini 110, CNU9312BR1, p/n NZ800EA#B1A and apparently is locked. But when I turn it on shows only <enter current password it doesn't give a lockout code so I can calculate withthe tool given in this forum the el****** reseting password. Anyway I tried writing the product name of the pc and the program gave me as a code : e9lof37pb3. When I try to enter this to the pc I notice that some keys are responding on the screen (showing a * when pressed and some not) is the keyboard broken also? or the mb perhaps? or is something else?

A:Compaq mini 110 bios lockout no code is given for reset pass...

Connect a USB keyboard to the mini notebook.  You can use it just as you can use the notebook's own keyboard. Press the power button and then when asked for the password, enter e9lof37pb3 and then press the enter key. e9lof37pb3 is the only system enable code for an HP mini.

1 more replies
Answer Match 49.14%

Hi All,
I tested the following attacks in Microsoft Advanced Threat Analytics and found them
not to be working.

Bruteforce Attack Pass-The-Ticket Pass-The-Hash Sensitive account exposed Using Plain-Text Authentication
I have tested other attacks like Reconnaissance
using DNS, Broken Trust, Honey Token account suspicious activities but they are working perfectly fine. I don't know
what's the issue with the above 4.
For
1. Bruteforce Attack:
I used thc-hydra-windows and triggered a dictionary attack using a list of passwords.

2. Pass-The-Ticket:
I used mimikatz to steal the kerberos ticket from a PC on which Admin is logged on. Impersonating an attacker, I copied the .kirbi file and Injected that file(using mimikatz again) to another PC on which a domain user is logged in.

3. Pass-The-Hash:
(Same as above)
4. Sensitive account exposed in plain text authentication:
I used mimikatz command 'sekurlsa :: logonpasswords' and was able to get passwords of all the users who logged on to that PC. But this was also not detected by MATA.

Please help me with the above issues. If possible, provide the tools using which I can trigger and detect those attacks.
Regards 

More replies
Answer Match 49.14%

Ok so i am furious with Micro$oft now! the other day i was FORCED to change my microsoft account after much nagging i did so and i dont like changing logins too much. (this was a week ago)
now for some random reason on earth without my permission my windows login also changed login passwords to the microsoft account. I DONT WANT THAT! that password is too long and complicated for someone who locks his computer every 5 minutes or so. why did this just kick in now? i changed M$ account pass over a week ago and today it decides to change windows login?! can i change JUST my local windows login separate from microsoft login?
if i try to change pass from settings it it goes online and says you cant use password that has been used before.

A:Can i change windows login pass without changing microsoft pass too?

Originally Posted by xdarkmario


Ok so i am furious with Micro$oft now! the other day i was FORCED to change my microsoft account after much nagging i did so and i dont like changing logins too much. (this was a week ago)
now for some random reason on earth without my permission my windows login also changed login passwords to the microsoft account. I DONT WANT THAT! that password is too long and complicated for someone who locks his computer every 5 minutes or so. why did this just kick in now? i changed M$ account pass over a week ago and today it decides to change windows login?! can i change JUST my local windows login separate from microsoft login?
if i try to change pass from settings it it goes online and says you cant use password that has been used before.



Don't go for a password. Use the PIN option That's just what you need and it's really a great thing as well.

4 more replies
Answer Match 49.14%

I'm getting the famous enter admin pass on boot (no BIOS update, laptop been off for a year (no OS atm) and I just started trying to fix it.  The error code I get is: [ 54549743 ] I hope that helps get my mobo unlocked!











Solved!
View Solution.

A:HP-2000 Enter Admin Pass/Power on Pass at Boot

@PoetheProgrammr? Enter    41421385 Regards, DP-K

2 more replies
Answer Match 47.88%

i have a hp touchsmart 610-1000 i forgot my power on password i need some help to get on my computer

A:i have a touchsmart 610-1000 cant get pass the power on pass...

 Hi, Attach the completed model number, for example 610-1031f How Do I Find My Model Number or Product Number?

2 more replies
Answer Match 46.2%

Hello everyone! Can you help me with a (hopefully) simple problem?
I have a Access 2003 SQL Pass-thru query that I need to prompt the user for Begin Date and End date, then put these values in the query. I read the Help, but I still don't understand HOW!
Questions: (BTW, this query is being generated from the Switchboard)
1. How do I prompt the user for the dates in Access? I can't use parameters and I don't understand how to use a prompt otyher than that.
2. How do I get those user responses into the query below
3. How do I write the querydef?

The SQL query is attached

Thanks!
Emil
 

A:Prompt&Pass value to pass-thru query

16 more replies
Answer Match 44.94%

I want to install miniPCI-E HP UN2400 (vid:03F0  pid:201D) modem in my HP 9470m? Please say me -this wwan card located in WhiteList of HP 9470m? (my bios ver - 68IBD Ver. 62 )

More replies
Answer Match 44.94%

Hi, I recently switched to a 9470m Elitebook folio - but the fan noise is killing me when docked in and standing on the desk near me. Is there any possibility to reduce the noise? Already done:- BIOS update- BIOS setting "fan always on on AC power" deactivated Windows 7 x64 Enterprise Already tried speedfan but it seems that it couln`t detect the fan. thanks

A:Fan noise HP 9470m

Its either a faulty fan or a faulty thermal sensor on the board. You need to call tech support to get a case loged to get the issue resolved.

9 more replies
Answer Match 44.1%

Hi there, I have an issue with non-responsive Brightness Adjustment on my laptop.  Symptom is that brightness does not increase or decrease when adjusting the setting using the FN Key + F9/F10 which are the designated buttons to adjust. There is also no change when I unplug from power outlett (which in theory should make the screen brightness come down). I have installed the latest bio, and have tried looking for new software/drivers, but to no avail... I simply can't reduce the brightness (and it's quite bright - to the point it is uncomfortable to use at night). Suggestions how to handle?

More replies
Answer Match 44.1%

I have an HP 9470m Elitebook that will not start up on a docking station. When starting up, it freezes on the "Please Wait" screen before login. I have tried it on 3 different docking stations with the same results. The BIOS are up to date. There is a driver update for the dock available, but it requires it to be plugged into to the dock, and when I dock the computer after start-up and try to install, I get the error message: ?Please connect at least one monitor to the dock and then continue.?  Unfortunately, this computer is also now just about 2 weeks out of warranty.

More replies
Answer Match 44.1%

Hello,In my company we have Hp 9470m Laptops.We have noticed some problems regarding the external screen showing some light distortion in a verity of screen types. If I use the DP port it will be O.K but via VGA the problem remains.Using different laptop on the same screen will show a clean picture with no distortion, so the problem is from the HP 9470m.  What can I do?Is this issue is something familiar?Thank you.

More replies
Answer Match 44.1%

i cant install bluetooth driver in hp elitebook folio 9470m in windows 10. i check built in device in BIOS there is no bluetooth device present. is it possible thatFolio 9470m not have bluetooth device in some models ?

A:is it possible thatFolio 9470m not have bluetooth device in ...

@zubair044? Your BT is a combo of your WiFi card. What WiFi card do you have installed??? REO

1 more replies
Answer Match 43.26%

I removed Simple pass and validity software, and I am still required to enter the master password that simplepass asked me to set up, I uninstalled all drivers, and software, and removed all remnants from registry, and I am still required to enter the password at login, i have done the netplwiz thing,  and bios says password is clear, so how do i remove this password requirement that i didnt have before i installed simplepass.

More replies
Answer Match 42.84%

Computer - HP Elitebook Folio 9470m OS - Windows 10 Pro, 64 bit Processor - Intel CORE i5-3427U CPU @ 1.80GHz  2.30 GHz Display adapter- Intel HD Graphics 4000 Anybody know why this unit won't support dual/multi-screen display? When the second, external monitor is connected by VGA to VGA, nothing happens on the Control Panel/Display/Change Resolution page. The drop-down box where mulit-screen display should be selectable offers only "1. Generic Non-PnP Monitor".....and nothing else. Thanks for any insight.Michael




Better to have one and not need it than to need one and not have it.Michael

More replies
Answer Match 42.84%

After having replaced an SSD the system shows a constant power button led on and the charging led is blinking white/orange.I removed the battery and even the clock-battery, with no help.The symptom shows when having the notebook on AC or/and battery. So I am not sure if the battery is dead, or if the notebook itself took some damage.Thanks for your advice. 

More replies
Answer Match 42%

Hi folks, am looking for a free i Folio 13" so I can breathe some life into my trusty old beloved ultrabok. If someone has an old i Folio gathering dust on the shelf and would like to donate for parts, I will be a greatful recipient.Thanks, Janet 

More replies
Answer Match 41.58%

hp folio keyboard key f5 keeps turning itself on...switching on the keyboard backlight on and off... and when starting the computer it makes it to beep as the key is pressed. Any solutions?

More replies
Answer Match 41.58%

I have the new xps 12 and I got the standard keyboard with it. Is it possible to purchase the premier magnetic folio separately? I have only seen it on the dell site as part of a bundle deal.

More replies
Answer Match 41.58%

hello I have a Hp folio 13-1020us. the other day it stopped turning on. I tried a couple more times and it turned on once and gave me a no operating system found error. Unfortunatly now its back to not turning on anymore. When i press the power button the button lights up white and the Wifi light lights up red both for about 6 seconds then they shut off.  it happens with the Laptop plugged in or not. Any help would welcome.  Thank you,

A:folio 13 will not turn on

[email protected], Welcome to the HP Forums!  It is a terrific place to find answers and tips! For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide: First Time Here? Learn How to Post and More. I grasp that you are having an issue with powering the unit on.  You managed to get it on once and you got a "no operating system found" error.  Now it is back to not starting.  When you press the power button, the white light comes on and the wireless light is red for about six seconds and then it powers off. Here is a link to  HP Notebook PCs - Computer Does Not Start (Windows 10) as an aid to overcoming this difficulty. Please let me know the results. Thank you  for participating in the HP Forums! We want to help you as well as others who may experience a similar issue. Please consider marking the post that resolves your issue as  "Accept as Solution?  to help other community  members!To say thanks for the assistance, please click the ?Thumbs Up Icon? below.

3 more replies
Answer Match 41.16%

I would like to ask why I cannot find Windows Hello in my Folio G1.In the manuel, it stated\s that this Folio G1 has an ir camera.However, I cannot find Windows Hello in the sign in option in the control panel (password and pin is set).Is it the software problem or the hardware of Folio G1 do not support Windows Hello and facal sign in?Many thanks! 

A:Cannot find Windows Hello in Folio G1

Hi, From the following specs, its does not support Windows Hello:      http://store.hp.com/wcsstore/hpusstore/pdf/EliteBook_Folio_G1_Datasheet.pdf Regards.

1 more replies
Answer Match 41.16%

I am a Englishman (Artist) living in small rural French village, very litte Tech assistance.
I have a Toshiba Folio 100 Tablet. Details in Toshiba = Application version 1-1-3. Android version 2-2-5 0026. Kernel version 2-6 3295E-1ET1. Build no. Folio and A50131. serial no xA020716R.
I have been informed that this model is discontiued.
It will pick up my email on wifi.
I am able to store pictures of my paintings, that have been transfered from a usb stick.
But I can not download or connect direct to a computer.
Is there any way or soft ware that will able this model to accept apps and downloads.
I have seen on Google that it needs to be Rooted (what this means I have no idea or how to do this)??
I have tried contacting Toshiba by Email to no avail?????
If anybody would offer me help or guidance on this I would be very grateful.
Please remember I am no Tech Buff keep advice simple (child like)
 

More replies
Answer Match 41.16%

My friend gave me a disc to install Adobe Font Folio on my computer. I'm learning graphic designing and he told me that it would help me greatly in making everything look professional. When I pop the thing in it tells me to go to explore the folders. My friend isn't much with Windows Vista and when I talked to him he told me he was busy so I decided to come here for some help.

Other than that I tried to drag one of the fonts to the fonts folder in windows and it gave me a weird message telling me the font couldn't be installed or something. I'd really appreciate any help I can get.

A:Installing Font Folio?...

There are options on what Vista does when you put in a CD. (Like, open the setup.exe if it's a program to install.) Or you can browse to the setup file and open it. I think the only way to add fonts is with Install New Font (or something like that) from inside the fonts folder.

2 more replies
Answer Match 41.16%

 I am looking into options to upgrade a Folio 1040 G1.   I know it now contains an M2 Sata SSD which i would like to upgrade to one of the newer  M2 NVME SSD drives since these are much faster than the drive i have now.  However, i cant find if the 1040G1 support the use of the NVME drive ???   

More replies
Answer Match 41.16%

Hi I got a brand new Elitebook Folio 1020 G1 - I would like to use the TPM 2.0 that it is advertised with. According to the specification it has an Intel Firmware TPM 2.0. But I don't seem to be able to enable it. The BIOS only gives me an option to enable/disable a TPM, but it seems to only be the hardware Infineon TPM 1.2. Can anyone let me know how I can enable the TPM 2.0 on the Elitebook?

A:TPM 2.0 on Elitebook Folio 1020 G1

Firmware TPM is version 2.0. Hardware TPM is v1.2, which is a subset of the TPM 2.0 specification version v0.89as implemented by Intel Platform Trust Technology (PTT).For more information on HP security solutions refer to: http://www.hp.com/go/clientsecurity.




-------------------------------I'm a Chinese with poor english-------------------------------548851818

3 more replies
Answer Match 41.16%

hello Support. I wanted to buy an PCIE SSD for my laptop .i removed the back cover and i checked i have an M.2 key MDoes my model have  an M.2 SSD that  support SATA or PCIe?

A:M.2 SSD Elitebook Folio 9480m! Help please!!!

Hi, M.2 key M has interfaces PCIe ×4, SATA and SMBus which supports SATA or PCIe. Regards.

2 more replies
Answer Match 40.74%

My HP FOLIO 1040 G1 doesn't start up.When I press power button : just power,wifi and Physical Sound Mute Button flashing in continue.Need your support please.

More replies
Answer Match 40.74%

Clean install of Windows 10 with a fresh image downloaded today with the Media Creation Tool.
I've tried uninstalling HD Audio and reinstalling, and I've tried installing IDT package from HP for Win10 and no luck.
Speakers do not show up and if I plug in headphones they're not working either.
This is a refurb laptop. Should I return it??

More replies
Answer Match 40.74%

We recently bought a couple new HP Folio 1040 G2's and we're having very random (multiple weeks can pass without one) BSOD's on all these computers. Memory was extensively tested, BIOS updated, graphics card and other drivers are also slowly being updated. The same Win 8.1 image is used on other machines and there are no issues there. These machines are malware free and have the same set of applications (AV included) as our other notebooks.
 
I even tried with http://answers.microsoft.com/en-us/windows/wiki/windows_other-system/driver-verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4b6d-95b3-c48669e4c983, for a day or two but I have yet to catch a BSOD when it's running.
 
Here's the error received (it's not always svchost.exe):

Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17668.amd64fre.winblue_r8.150127-1500
Machine Name:
Kernel base = 0xffff... Read more

A:Stop Error on a few new HP Folio 1040 G2's

I see fltmgr.sys and ntfs.sys + "pfn" (Page Frame Number - page file) in the stack text, which may indicate some type of issue with the hard drive.
 
However, you are telling us that BSODs are occurring on multiple systems, so HDD problems seem unlikely since multiple systems are involved.
 
If 3rd party software related, Driver Verifier may help.  Run it and see if any 3rd party drivers are flagged -
 
http://www.sysnative.com/forums/bsod-crashes-kernel-debugging/29-driver-verifier-bsod-related-windows-10-8-1-8-7-vista.html#post87
 
Regards. . .
 
jcgriff2

2 more replies
Answer Match 40.74%

Is it possible to upgrade the RAM and the SSD in HP EliteBook Folio 1040 G1 (G7U14AV)?If yes, could you please advise on compatible RAM and SSD modules that may be used for that purpose.Thank you very much in advance for your time and attention!

A:HP EliteBook Folio 1040 G1 - RAM and SSD upgrade

Hi Detelin Elitebook Folio 1040 G1 ships with 4 GB soldered down memory and one memory slotmemory can be upgraded to 8 GBBelow is the memory specDR3L SDRAM (1600 MHz, 1.3v) Below SSD  drives are supported Solid State DriveSATA 6 Gb/s 128 GB* Solid StateSATA 6 Gb/s 180 GB* Solid StateSATA 6 Gb/s 180 GB* SED Solid StateSATA 6 Gb/s 256 GB* Solid StateSATA 6 Gb/s 256 GB* SED Solid State RegardsHappy2help




I am HP Employee

2 more replies
Answer Match 40.74%

I want to know if I can easily upgrade my laptop to Windows 10. I've searched the forums, and get either no results, or tens or hundreds of thousands of irrelevant topics.

More replies
Answer Match 40.74%

Is there anything to do to reduce some noise from the fan.I already check the fan gate.I only use laptop for using ms office and watching video clip. 











Solved!
View Solution.

A:I've used folio 13-1007tu. Its fan noise is a little loud!!!...

I would recommend you to update the latest BIOS for your notebook from the support and driver download page on hp.com, and also go through the following document which will help you reduce the FAN noise. http://support.hp.com/us-en/document/c01007591 Hope this helps!

9 more replies
Answer Match 40.74%

Hi Just bough this laptop plus a Samsung v-nand ssd 950 Pro M.2 (nvm express) 512GB to put in it. But the laptop does not seem to see the new SSD. Is there anything I need to change in the bios to make it visable or is it not compatible?  I was advised that it was as these laptops are very flexible.

More replies
Answer Match 40.74%

We have several older DLP projectors that will not work with the Elitebook Folio 1040 G3.  The projector does not sense that it is connected to the Folio 1040 G3 and it continually searches for a connected PC.  The 1040 G3 uses a dock connector with Ethernet and VGA adapters on it.  The most current Intel grapics driver is loaded as well as all other drivers available through the HP Softpaq Download Manager.  The DLP projectors support resoloutions of 1024x768 and 1280x1024.  We have confirmed they are working with Other HP notebooks such as the 8470p.

More replies
Answer Match 40.74%

How do you get WiDi working on this thing. I have 2 identical 9480m on my desk.   One still has factory load (Windows 7  Pro x64) on it and the WiDi works flawlessley. One has my base Windows 7 Enterprise x64 image on it.  Initially using the HP Driver Pack (v1.02A), I have upgrade both the Wireless to lateset Intel Wireless (v17.10) and and Video to the current HP Intel Driver for the model (10.18.10.3958 A) I run the WiDi installation software (4.2.29.0) and it continually tells me the hardware is not supported.  WHAT ELSE DO I NEED???? 

A:EliteBook Folio 9480m and WiDi

1) Make sure that your wireless is turned on.2) Do a search on your system from Intel Widi.3) Open the software and search for Widi enabled devices.4) Connect..

1 more replies
Answer Match 40.74%

I brought this laptop of my friend but asks me for power up password and administrator password to which I don't no got given this code arfter entering password wrong 3 times system disabled 76801182

A:Hp folio 13 system disabled 76801182

Hi, Enter:     69769104 Regards, DP-K

5 more replies
Answer Match 40.74%

I have a HP Dock Connector to Ethernet and VGA Adapter (http://store.hp.com/UKStore/Merch/Product.aspx?id=G7U78AA&opt=&sel=ACC)  that I use to connect my laptop to an external monitor (HP ProDisply P221) and the wired network. I now want to connect a second monitor (another ProDisplay P221) to my laptop. What are my options? I don't want to buy a full docking station. I read somewhere that a VGA splitter cable would not be useful as it simply duplicates the same display as one sees on the first monitor. I have an HDMI port available on my laptop. Can I use this port with an HDMI to VGA cable and connect the HDMI-to-VGA output to the second monitor? Will this give me a continuous (and NOT a duplicate display)?Thank you for your help.

More replies
Answer Match 40.32%

hi,i have folio 1040 G2 ( f6r39av ) and i want to know do i have nfc & sim card in my model or its dummy slot  best regards.

More replies
Answer Match 40.32%

Is it possible to install an IPS 1920x1080 display into HP EliteBook Folio 1040 G1 (G7U14AV)? If yes, could you please advise on compatible screens that may be used for that purpose?   Thank you!

More replies
Answer Match 40.32%

Is there anywhere to get a recovery image of the originally installed Ubuntu?  I did a fresh install of 16.04, and the touchpad no longer works correctly, and I installed the "normal" 14.04 and it doesn't work there either, so I'm guessing this had some addon drivers that aren't part of the normal Ubuntu.  The download section for the 1020 G1 doesn't even LIST Ubuntu as an OS option. Alternately, assuming the addons were in a ppa, if there was somewhere I could download those drivers alone for 14.04?

A:Any way to get Folio 1020 G1 Ubuntu recovery image?

@TLMiller? I did find a datasheet that does indicate the Ubuntu Operating System. A datasheet is not a contract, nor does it indicate how the product is ultimately sold. Nonetheless, if you purchased the product from HP, then HP may be able to help you restore what you had on the computer when you received it. You need to contact HP Business Support and talk to an HP representative. Excerpted:Datasheet | HP EliteBook Folio 1020 G1 Notebook PC HP EliteBook Folio 1020 G1 Notebook PC Specifications TableAvailable Operating SystemWindows 10 Pro 641Windows 10 Home 641Windows 8.1 Pro 641Windows 8.1 641Windows 7 Professional 64 (available through downgrade rights from Windows 10 Pro)2Windows 7 Professional 32 (available through downgrade rights from Windows 10 Pro)2Windows 7 Professional 64 (available through downgrade rights form Windows 8.1 Pro)24Windows 7 Professional 32 (available through downgrade rights form Windows 8.1 Pro)24Windows 7 Professional 641Windows 7 Professional 321FreeDOS 2.0Ubuntu Linux 3 Technical Specifications Footnotes:3 Not available with touch  Assuming the notebook is still covered under warranty: Open HP Customer Support - Laptops >Enter your precise Model / Product name in the space provided and Click Search iconORSelect 1 > Narrow your Selection >> Click on the icon for your notebook type / seriesWhen your computer?s page opens > Click last tab (on the right): Get Help from HP >&nbs... Read more

1 more replies
Answer Match 40.32%

My mousepad on my HP Elitebook Folio 1040 has stopped working. An external mouse works fine. System indicates that my mouse drives are working fine. Suggestions?

More replies
Answer Match 40.32%

I just lost my adapter and power cord for my Folio 13t-1000.    Tried to order from HP parts but neither original 613149-001 nor replacement 693715-001 is available.   Have tried Amazon for 3rd party but reviews look sketchy.    Any insight on what will work and where to order it is appreciated.   I'm desperate.   

More replies
Answer Match 40.32%

Hi,

I have a 2 month old HP EliteBook Folio 9470m laptop. The mouse pad used to work, but it no longer does. I went into Control Panel, Mouse, and Device Settings and everything is enabled correctly. Any help is greatly appreciated.

Thanks

A:Mouse pad on HP EliteBook Folio 9470 not working

I apologize, I meant Touch Pad, not Mouse Pad

1 more replies