Tech Problem Aggregator

Route audio through HDMI without device connected?

Q: Route audio through HDMI without device connected?

My headphone jack is busted, so I bought an HDMI to 3.5mm adapter so I could use my headphones that way. However, I can't get the laptop to send audio over HDMI because it doesn't think there's any device to receive that audio. How can I get Windows to route audio that way anyway? Everything I find is the opposite problem, where someone has a device plugged in and recognized but can't send audio to it.
OS: Windows 7
Model: Dell Inspiron 15r Special Edition
Processor: Intel Core i7-3612QM CPU @ 2.10GHz 2.10GHz
Graphics card: AMD Radeon HD 7730M
Adapter: click here

More replies
Answer Match 72.66%

I was wondering if you could give me some advice on a current computer issue.

So, I've got my TV hooked up to my PC as an extra monitor via HDMI. Up until last night I was able to get audio from my PC to be played/heard/whatever through the TV.

Earlier in the evening, I saw a bunch of Windows Updates needing to be installed, so I installed them. One update was for the Intel Graphics Card, wasn't able to be installed because of Windows Update Error 80070103 (which apparently appears when Windows tries to install something already installed). I didn't think much of it at the time and proceeded with the post-install restart (TV's HDMI audio was still working at this point).

Shortly after the restart (upon resuming watching the video from before), I noticed that the TV's HDMI audio was no longer playing. I checked the Audio Device manager to see if it somehow got deactivated and found that it was no longer listed as a possible playback device. I double-checked to make sure unactivated devices weren't being hidden from view (which they weren't).

I tried un-plugging the HDMI device, restarting, re-plugging - to no avail. I try replugging the HDMI cable into a different port on the back of the TV.

I then try to do a system restore to before the installed the updates but that didn't work (Windows said they it was unable to restore anything so no settings were changed).

I try to re-install the Intel Graphics update via Windows Update but I get that Erro... Read more

A:HDMI Audio Device No Longer Appears as Playback Device

If you have NVIDIA GE Force, that suggests it is the active video device, rather than the Intel. Check the Device Manager, Sounds section to see what is listed and if there are any error codes for the NVIDIA HDMI Audio.

2 more replies
Answer Match 72.66%

I have a HP Pavilion dv4-1435dx laptop. TV is Dynex LCD (one of those no name brand ones ) I checked the drivers on the laptop, they all seem to be up to date. However when I go to Control panel-Sound-Manage audio devices, there is no icon with an HDMI label to select for playback device. How do I add the driver for HDMI (to select)?

I have scanned (and tried) numerous suggestions on this type of a problem on different sites on the web (including this one, under a different thread)

Any suggestions, other than try a new cable?
Thank you in advance.

A:No audio When PC connected to TV by HDMI

Welcome to SevenForums.

In Sounds / Playback make sure it is not disabled and hidden.
Rt click on the Sounds / Playback window to make sure "Show Disabled Devices" is checked.

If it is not there open Device Manager to see if is listed and there are no errors.
You can open Device Manger from Start/Search

3 more replies
Answer Match 71.82%

I wish to connect the HDMI to a video projector and the audio port to a sound mixing desk. Either audio or video works fine alone but when both cables connected am getting high-pitched feedback into the sound system. I have tried disabling HDMI as an audio device but it makes no difference. Have tried more than one HDMI and audio cable - same result.  

More replies
Answer Match 71.82%

Hi folks, so I got a new pc and connected it to my LG 42LV550T using a DVI to HDMI and 3.5mm from line out (and tried headphone socket) to the 3.5mm audio in (RGB/DVI) socket on the TV but I don't get any sound on the TV.
I connected the PC to my stereo using the line out and headphones socket with 3.5mm to stereo/phono plugs and I get sound, but I would like the sound through the TV and then the TV connected to my stereo for better sound all round.

I know DVI doesn't carry sound.

I had a chat on LG support with no help

Any ideas ?

PC specs.
OS Version: Microsoft Windows 8, 64 bit
Processor: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 8082 Mb
Graphics Card: Intel(R) HD Graphics, -1984 Mb
Hard Drives: C: Total - 953516 MB, Free - 897064 MB;
Motherboard: Gigabyte Technology Co., Ltd., H61MA-D3V
Antivirus: Windows Defender, Disabled

Thanks TechnicalH1
 

A:DVI to HDMI and 3.5mm audio connected but no sound

16 more replies
Answer Match 71.82%

No sound.
Little speaker with the red 'x' appeared yesterday
I have gone through the whole update drivers circus to no avail, my laptop can't detect that it has speakers built in so it doesn't bother finding a driver for them.

This is where I am at:
- Intel Display Audio is the only driver installed for sound
- This means that sound works when the laptop is plugged into an HDMI
- When HDMI is not plugged in, the computer cannot find the built in speakers.
- I have Linux on this system and audio does not work there as well

I would call this a broken chipset, but the fact that the computer still processes audio with the HDMI cable attached is confusing me. Also, the 'audio board' for this laptop has 2 usb ports attached to it, and those both work fine.

Any help would be appreciated

A:No Audio Output Device is installed, HDMI Audio Out Works

Hi welcome to the forum

first thing i would check is the bios to make sure it is enabled.

9 more replies
Answer Match 70.98%

Hi,

I just got a new (cascaded) computer with seemingly no standard audio.

The audio icon is a speaker with and X through it and the only audio device that populates the Playback Devices list is the HDMI digital audio.

I have audio on the motherboard (think I can find it?? nope) and some auxiliary ins and outs on the front of the PC (headphone, line in).

No audio will output whatsoever. Keep in mind I will not be using the HDMI audio.

No headphones and no "X"s in the device manager...

um... any help would be appreciated! Thanks

Mike

A:No Audio, HDMI (unplugged), No Audio device listed

Go to the Control Panel/Hardware and Sound and finally the Sound Panel. What is listed there? The HDMI and Speakers should be listed. If that is the case make the Speakers the default playback device.

If the Speakers are not listed, RIGHT click in a blank area on the panel and check the Show Disabled Devices and Show Disconnected Devices and then if the Speakers are shown you can make them the default playback device.

If there is still no speaker, you can check the Device Manager to see if the sound is listed (could be RealTek or IDT) and if it is check to see if there is an error code,

As this is a new PC and you can't get it working it would be best to contact HP support. If there is some problem only HP can get it corrected under warranty.

8 more replies
Answer Match 70.98%

I've had my laptop for a while, and I've used my TV Screen as a secondary monitor a lot. A while ago my computer updated to windows 8.1 when I fell asleep on it and accidentally hit the update button when it came up (oops), making me have to use windows 8.1 now. Now I haven't had many problems with it, it works fine and dandy, but I do have a major problem when I try to use my second monitor. When I run a game or movie on it, the audio comes out from the laptop speakers, not the TV speakers. Previously, using windows 8, it would let me use both.

I know that if you go into the control panel and the sound systems that it should show two speakers, but for me it isn't. I've tried lots of different things and browsed the web for an answer, but I can't find anything.
Screenshot of my playback devices window:

If anyone knows how to get this to work, it'd be a big help!

A:HDMI connected second momitor not playing audio

According to your screen shot, you only have the PC audio (RealTek) and no HDMI audio. Reinstall the drivers for your video and see if that restores the HDMI audio.

No PC info posted, please fill in the "My System Specs". Helps us to try and help you.

I have both HDMI and PC audio on my Win 8.1 machines so it should work for you, if the PC is fully compatible.

1 more replies
Answer Match 70.98%

I know this is one that has been floating around the forums for a while but I have not been able to find anything that works in my situation. When I connect my laptop to my TV (Panasonic Viera Plasma) via an HDMI cable, I can get the video to show on the TV fine but there is no audio on the TV; it comes out of the laptop. I have tried everything I can think of including deleting the drivers then reinstalling them, updating them, rolling them back, etc., etc., etc. Here are the specs on my laptop:HP ENVY dv7 Notebook PCWindows 8.1 64-bit, 8GB RAMIntel(R) Core(TM) i5-3230M CPU @ 2.60GHzIntel(R) HD Graphics 4000Intel(R) Display Audio (with Beats Audio)IDT High Definition Audio CODEC Also, here is a snapshot of the Playback Devices:  As you can see, I have nothing which says "HDMI". I have gotten quite frustrated with not being able to get this to work. I would appreciate any help I can get. Thank you. Alex...

A:HP Envy dv7 - No Audio When Connected to TV by HDMI Cable; W...

Can someone please help...?

9 more replies
Answer Match 70.98%

Been trying to figure out a problem with HDMI audio out and "not plugged in error"

HW is a motherboard with HD3200 and ALC889A HD with latest drivers.

Using a HDMI cable i get HDMI audio out, but if i switch inputs on the receiver then back HDMI audio is "not plugged in".

changing resolution brings it back as default device.

Tested a backed up vista image with ati 9.04 and realtek hdmi 2.23 drivers and it worked fine changing inputs on the receiver.

The same drivers in win7 did not resolve the issue, so im guessing theres something in win 7 that causes this

A:win7 bug with HDMI audio connected to receiver

if you have an HDMI capable receiver I am going to assume you have at least a 5.1 setup correct? And I am also going to assume that "HW is a motherboard with HD3200" means onbaord HD3200?

If yes then I would suggest using either the coaxial output or optical S/PDIF output to the receiver as you are not reciveing 8 channel LPCM through HDMI.

As to your actual problem I am setup same as you, however I am not having that problem... is video still able to pass through to your TV even in the audio not plugged in state?

7 more replies
Answer Match 70.14%

Problem started a little over a month ago on my HP laptop running Windows 7 64bit.

When I connect the laptop to my either of my TVs through an hdmi cord everything works fine. Videos run smoothly and the audio is in sync as if there's no problem.

If I try to watch a video on just the laptop though the problems start. If I try to play anything (songs/videos) in Windows Media Player then it says "Windows media player encountered a problem while playing this file".

When I play a video on YouTube the video runs smoothly but there isn't any audio to go with it.

If I go to control panel - sound - speakers and headphone properties and try to play a test sound it says 'failed to play test tone'

Attempted to update the IDT High Definition Audio CODEC driver but windows said it was up to date. Same thing with the Intel(R) Display Audio driver.

Thanks for any help

A:hp laptop audio and video problems (unless connected through hdmi)

Are you leaving the HDMI cable connected to the PC when you try to us the PC's sound (IDT)? Generally, when an HDMI cable is plugged in and detected the sound automatically switches from the "Speakers" (the IDT) to HDMI as the default audio playback device and thus no regular PC sound.

6 more replies
Answer Match 70.14%

Laptop audio works until I plug in HDMI cable to external monitor.  Looking for guidance on resolution.  Thanks,

More replies
Answer Match 69.3%

I usually connect my laptop to my tv to watch video files in VLC. Recently, I have been noticing when I connect my laptop to my TV and play these video files, the audio skips so much that the video is unwatchable. This happens with every video I try to open (mostly MKV and AVI files). However, when I play these video files without the computer connected to the TV, they work fine. Could the problem be my TV or my HDMI cable?

A:Playing video files causes audio to skip when connected to TV via HDMI

In VLC, set a delay between audio or video, or for the mkv's you can demux and adjust them. First, I would update your drivers, is this a laptop or desktop?

3 more replies
Answer Match 68.04%

Hello,

I'm trying to understand how to enable HDMI audio on my Win10 Asus notebook (before buying a A/V receiver 5.1 ).

I think I should have a "Digital Audio (HDMI)" option, or something similar, in my Playback Devices inside Windows Audio control panel, but I don't.

My hardware:

- Intel 4600 Graphics
- Nvdia Geforce GTX 580M
- Realtek High Definition Audio

All the drivers are up to date (or at least very recent, I usually prefer stable versions even if they aren't the latest ones). Still, I don't have any HDMI option in any control panel (Nvidia, Intel, Realtek) or in Windows Audio.

The only place where I can find any mention to "Audio" is the Intel Graphics Control Panel under Display > Audio. But there is only a text that says that there is no display connected with audio capabilities.

My Nvidia control panel has only the "3D Settings" section, but I see from other users that they have others sections, like the "Display" one where there are options for HDMI.

I have no TV or other HDMI enabled device right now, so I can't try to connect the notebook until I buy the A/V receiver. But I guess that I should have the HDMI playback device and the HDMI options in some Control Panel even when there is no HDMI device connected, right?

Under Sound, Video, and Game Controllers, I have no "Intel(R) Display Audio" that should be associated with HDMI out (even if when I install Intel drivers there is indeed a DisplayAudio f... Read more

A:No HDMI audio playback device

While it's plugged in, right click on the volume icon, and click playback devices.

Select the HDMI device and then click set as default

1 more replies
Answer Match 67.2%

Yes, another thread -HDMI to HDMI from PC to TV - no sound- however my default device is my HDMI( under playback devices - I have the green checkmark and when I click on the speaker icon it show the green bars moving) still no sound. I have tryed everything - installed drivers - changed the setting on my TV - nothing Nada zip!!! Brand spanking new computer - just bought it yesterday -

AMD Athlon X2240
AMD 780G Chipset

Toshiba 50hm66 TV - any help would be appreciated - the store I purchased it from is looking for a fix - but could be a few days.

Thanx

A:ARGHHH No audio with HDMI (but it is my default device)

fixed it

2 more replies
Answer Match 67.2%

OS: Win 7 x64 Pro Mobo: Asus P8P67 Deluxe (LGA1155) GPU: GeForce GTX 560 Ti (rolled back to 347.09 at present) I have never had any issues with respect to HDMI audio on my TV before with my present hardware configuration. After performing the express installation for the 347.25 update, my TV no longer appears as an audio device. It is not "unplugged" or "disabled," it is simply no longer appears as an option but is still recognized for video. I have attempted the ancient tactics of rebooting, unplugging and plugging the TV back in, rolling back my drivers and doing a clean installation to no avail. Please can anyone help me?!

A:Nvida 347.25 Removes HDMI Audio Device

Hi welcome to the forum

i would suggest trying a restore point before the issue started.

9 more replies
Answer Match 67.2%

Hi everyone

The issue i have is that when i connect my laptop to my tv via HDMI i cannot get any audio, the video works like it should. It constantly says "not plugged in" and is greyed out in playback devices. The issue is only when running windows 10, when i boot into Ubuntu on the same machine the HDMI connection works perfectly so i figured it cant be a hardware problem....

I have tried installing AMD legacy drivers, updating my graphic and audio drivers through windows updating and searching the web for older drivers as it has worked in the past. I have also performed a reset in win 10 because had been playing around with scheduled tasks to try and improve boot time on my ageing machine.

Also tried starting the computer with the HDMI cord already plugged in and the TV on just in case it was some sort of issue recognizing it getting plugged in. Have also tried deleting drivers and restarting with the cord still attached.

My Laptop is a Compaq Presario CQ62 402AU
CPU - AMD Athlon II P360
Graphics card - Radeon HD 4200 series

I apologize in advance if i have posted in the wrong section, i have been searching for a solution for a week now and cant seem to find anything that fixes my problem

Thanks in advance for any help

More replies
Answer Match 67.2%

i just upgraded from a quad core AMD to an i7 6700
i also swapped mobo from an Asrock to MSI z170a

i havnt changed my video card yet so i am using the same video card.
a radion 7850

Before....my AMD was an APU.. and i ran to montors plus a TV from my Computer.

My main monitor being HDMI and the other just a normal dvi... i ran the TV through HDMI and the audio device for the TV always showed up.. i never ever had to do anything ... it was just alwasy there.

so after the new build... my 2 monitors are hooked up identical.. ont he same radeon 7850... but the TV is running through the HDMI port from the MOBO wich is running the built in intel HD graphics 530 but the audio device no linger shows up.. i cant find anything that will make my tv audio work from my computer.

this is my main form of movie and TV watching.. i need to get this fixed ASAP.. i tried deleteing and reinstalling all audio drivers and nothing. and now AMD ccc tells me that my tv doesnt support audio.. after its been using the audio on it for 4 years.

how can i fix this? is it a bios setting? i get picture and it functions normal other than audio.

A:New Build but cant get HDMI audio device to show up

You need to connect TV to GPU instead of MB. APU graphic drivers are different from drivers for discrete GPUs and incorporate sound drivers for HDMI output and have nothing to do with on-board sound on MB.
If you want to use on board graphics and sound, you'll have to get drivers for it, being an Intel based board, it needs own drivers for that part, AMD drivers can't regulate that. Also check Sound section in Control Panel and mark appropriate output as default.

10 more replies
Answer Match 66.36%

Hi,

I have installed windows 7 Ultimate 64bit and have now found I get no sound through the HDMI device. I had a simlar issue in Vista and found I had to use an older Nvidia Driver 175.97 for Geforce 7650 GS inorder to get this working with "Speaker" as default device...However in Windows 7 even using this older driver does not work. I have Latest nvidia driver (8.16.11.9062) and realtek (R2.35) drivers installed... I have checked various settings in realtek sound manager and audio output devies but no luck?...Any help will be greatly appreciated. Thanks
[IMG]file:///C:/Users/Amzo/AppData/Local/Temp/moz-screenshot.png[/IMG]

DXDIAG info

------------------

Code:
System Information
------------------
Time of this report: 10/29/2009, 16:42:54
Machine name: AMZO-PC
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: MEDIONPC
System Model: MS-7318
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz (2 CPUs), ~1.9GHz
Memory: 3072MB RAM
Available OS Memory: 3070MB RAM
Page File: 1954MB used, 4184MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32... Read more

A:No sound from HDMI device Nvidia and Realtek HD Audio

Are you using the S/PDIF out from realtek to S/PDIF in on your nvidia card?

9 more replies
Answer Match 65.94%

Hello,
My lapotop is HP Pavilion 9750 running Windows 7 Enterprise (with the latest updates). When I'm inserting the HDMI cable to view my screen on the TV it automatically shows the video, but I have to manually change the default playback from "Speakers" (Realtek High Definition Audio) to "Realtek Digital Output" (Realtek High Definition Audio) so I could hear the audio from my TV and not from the computer.

Is there a way to make that switch automatically when I connect/disconnect the HDMI cable?

Thanks!

A:How to automatically change audio device when inserting HDMI cable?

Apparently the video card you have does not have on-board audio (chip) and must get the audio for HDMI from the S/PDIF (Digital) connection on the motherboard. This type of operation, in cases I've dealt with, will not autiomatically switch the audio playback device.

On newer video cards with the HDMI audio built on the video card, this type in most cases will automatically switch the audio playback.

3 more replies
Answer Match 65.94%

Dear all,

I found this forum by intensive googling for an answer to this question. As I found nothing, I hope I can get smarter by simply asking you all, thank you for reading!

I have a laptop (Dell XPS M1330) running Vista Home Premium 32bit featuring an HDMI port and, as far as I can see, a soundcard called SigmaTel High Definition Audio. I regularly watch videos on my LCD TV using HDMI and I am constantly annoyed by the fact that the audio output doesn't automatically switch over to HDMI when the cable is connected (or vice versa when the cable is disconnected). One would expect it to do so as this is how it generally works when f.ex. headphones are connected and indeed, on my laptop, the audio switches from speakers to headphones automatically without any problems.

My solution to the problem is to manually change the default output device to HDMI and then restarting the media player. I cannot see why this operation cannot be automatic, and therefore I ask of you all if there is any way to accomplish an automatic switch from speakers to HDMI when an HDMI cable is connected.

Thanks
Jonatan

A:Switch audio output device automatically between HDMI and speakers

Yes. I have a 64 bit system that also has an HDMI plug that I have hooked to my Sony TV. It works perfectly and switches off automatically when my TV is not in HD mode ( this is the output title only ). However, I have tried to hook the speakers that came with this Acer 64 bit Vista and it tells me " No Audio Output Device is Installed ". I have reverted back to the monitor that has a built in set of speakers with a separate plug for them, and they still don't work either. I would have to think there is an answer somewhere. We cannot be the only two people wanting our PC's to pull double duty.

A little help ?

6 more replies
Answer Match 65.52%

... a USB 2.0 EHCI host controller

What was happening was I was getting CPU usage spikes on a single CPU core. Every 40 seconds or so it would spike to 100% on my 4th CPU core (using xperf I could see this was only about 4 to 6 tenths of a second from start to finish, but still not right). I finally narrowed it down to an audio issue, then finally down to a USB only audio issue. This happens with any USB audio device. I have two different headsets, one uses Microsoft Generic USB audio drivers and the other uses Logitech G930 drivers.

Then I found this hotfix: There is high CPU usage when using a USB audio device connected to a USB 2.0 EHCI host controller

I thought my prayers were answered. Turns out this hotfix only helped it by ~50%. This hotfix has made my 4th CPU core spike to about 50% instead of 100%, it is better than nothing, but I am still not satisfied.

I have tried everything that I can think of but a fresh Win7 install at this point (which I would like to avoid, and I think the problem would remain anyway). This includes disabling all enhancements in audio properties, reinstalling drivers, updated firmware, BIOS, "clean boots", disabling any and all anti virus/anti malware/antispam/anti-whatevers, disable firewalls, using no other USB devices, removing ghosted devices, checked event viewer for problems, used Malwarebytes and SuperAntiSpyware in safemode to search for problems, etc...

Also, if it helps, this problem does NOT happen if I am not playin... Read more

A:There is high CPU usage when using a USB audio device connected to...

Bump?

9 more replies
Answer Match 61.74%

When I plug in the ethernet cable to my modem, everything is good, but when i want to use it with my wireless router, it doesn't detect the internet.
 

A:Solved: My computer doesn't receive internet when it's connected to my wireless route

have you tried disabling the encryption?? post an IPCONFIG /ALL when connected tio the wirelesss
 

3 more replies
Answer Match 60.9%

I am considering buying an HDMI splitter to get around a problem I now have when streaming music only from the Internet. Currently I have about a 15 ft. cable running from the HDMI output on my computer to my Samsung TV. With this setup everything works fine. I can watch Youtube videos or Netflix movies. The thing that I don't like is that if I want to just stream music for several hours, I have to leave the TV on since the audio connection from the TV to my receiver is not a pass thru. It is only live when the TV is on. I am wondering if I can use an HDMI splitter to solve this problem. What I plan to do is to connect the computer HDMI output to the input on the splitter. Then use one of the splitter's outputs to go to the Samsung TV and the other one to go to my receiver via an HDMI-to-2 Channel Stereo Y-adapter. Just wondering if the connection to the non-HDMI device via the Y-adapter will upset the functioning of the splitter. What about the the EDID handshaking and HDCP signal that HDMI sources and displays need in order to function?

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) II X4 630 Processor, x86 Family 16 Model 5 Stepping 2
Processor Count: 4
RAM: 3327 Mb
Graphics Card: ATI Radeon HD 4200, 700 Mb
Hard Drives: C: Total - 100099 MB, Free - 79895 MB; D: Total - 238472 MB, Free - 7248 MB; E: Total - 51207 MB, Free - 2940 MB; F: Total - 52226 MB, Free - ... Read more

A:Can I Use HDMI Splitter Outputs With HDMI and Non-HDMI Device?

7 more replies
Answer Match 60.06%

A while ago, I accidentally broke off the prong on my speaker wire inside the audio out port of my laptop. Naturally this rendered the port practically useless, but I recently found that if I position the cord just right I can still plug speakers in and get them to work. The problem is, only the left speaker will work, it is impossible for me to get any audio through my right speaker at all. Since this leaves me with only half of the audio experience, the left channel, from anything I listen to, I was wondering if anyone knew how I can change my audio settings so that the full audio is played through both speakers (i.e. mono output rather than stereo), though I will obviously only be hearing it through one. I've tried every apparent option in the volume mixer, but none seem to give me the desired effect, so I'm thinking I may have to use a third party program unless I missed something.

I'm running Windows Vista Ultimate, 32 bit. I'm not sure about the particulars of my sound card, but Device Manager names it as Conexant High Definition Audio if this helps. Thank you in advance for any help you may be able to provide.
 

A:Possible to route PC audio entirely through one speaker?

If that pc was mine I would do whatever it takes to get the broken plug out. ( Or repair the socket. )
But another way around it, and to get stereo sound from speakers, would be to buy a set of USB stereo speakers.
They plug into USB socket, and are powered by the same socket.
On the upside you will get the stereo sound you want, on the downside the sound won't be more than about 1W, and you will have one USB socket less to use for other things.
I use Altec Lansing XT-1 USB speakers on a Dell 510 tower, it's fine.
Fairly sure my speakers are not made now, but similar ones are easily available for a low cost. See;
http://www.usbspeakers.org.uk/logitech-s150-digital-usb
 

2 more replies
Answer Match 60.06%

Hi all,

Recently upgraded my Dell Latitude E6420 to Windows 8.

When I attempt to use my Sony TV as a second monitor via HDMI cable, I no longer get audio. Cable is fine and worked previous to upgrade.

Video comes up fine. In "Playback Devices" (with both "Show Disabled" and "Show Disconnected" devices checked), Digital Audio is greyed out and unable to be selected as a default device - simply says "Not plugged in".

I've tried updating various drivers, but to no avail.

Display adapters:
Intel(R) HD Graphics 3000NVIDIA NVS-4200M

Have been reading through forums etc. for the past few days, but no joy. Very frustrating.

Any help would be much appreciated.

Cheers.

A:HDMI Audio Device "Not Plugged In" post Windows 8 upgrade.

When you plug in an HDMI cable, the HDMI becomes the default audio playback device, rather than the "Speakers" (the PC sound card). You will have to manually change the default playback device back to your speakers in the Sound Panel.

10 more replies
Answer Match 60.06%

So recently I tried to connect my Acer Aspire V 15 laptop into a screen using HDMI. The video worked, but the audio did not play through the tv speakers.

I tried...
different screenDifferent HDMI cableRestartingReinstalling Audio/Video DriversUpdating video/audio driversAudio TroubleshooterInstalling generic driver (Microsoft Basic Display Adapter)

But then when I manually updated the Intel Graphics Driver OVER the generic driver, I finally had audio.
Just thought you guys might want to know since there's a million other ways to fix it on google. Or maybe I read them wrong... Ah well.

More replies
Answer Match 59.22%

I have an Insignia USB Bluetooth adapter plugged into a USB port on my WinXP w/SP3 PC and have the drivers installed, the Bluetooth headphones are discovered and connected, but it won't route sound through the USB adapter. I booted up iTunes and WMP and played music but no sound is forthcoming.

Does anybody have an idea as to getting audio routed through the USB adapter?

Thanks
 

More replies
Answer Match 59.22%

Hi all,

I'm having a problem with my VPN client connection. The connection keeps artifically terminating due to route changes. This is a security mechanism of the client software and cannot be stopped. I actually caught the route change by doing a route print from DOS consecuatively until it actually drops (see below). The route that is changing is the windows zero config route (169.254.0.0). It starts out with a Gateway of my local ethernet adapter (192.18.1.6) and then adds another route, one with the IPSecSHM adapter as the gateway sometime into the IPSec session. This then causes the session to terminate because of the route change rule in the client.

My question to the forum is what would cause the pc to want to add another route for the zero config route? I believe this is the root of my problem which is having the IPSec client terminate prematurely.

I have tried all the obvious things like uninstall and reinstall the software of the VPN client.

my pc software is Windows XP Professional SP2 version 2002 (fully patched even with the latest security patches from Microsoft). My PC hardware is an HP Compaq 6400 laptop.

Let me know what else you need to help troubleshoot. Any and all help is appreciated.

20.130.7.0 255.255.255.0 47.141.80.197 47.141.80.197 1
20.131.7.0 255.255.255.0 47.141.80.197 47.141.80.197 1
20.137.250.0 255.255.255.0 47.141.80.197 47.141.80.197 1
20.137.253.45 255.255.255.255 47.141.80.197 47.141.80.197 1
20.137.255.0 255.255.255.0 47.141... Read more

More replies
Answer Match 58.8%

Hey everyone,

I recently upgraded to Windows 7 (Build 7100) from Vista (32 bit) and am having trouble getting audio from my HDMI out port.

I am using the Mobile Intel 965 Express Chipset and have upgraded to the latest available driver but still no luck.

I have attached a screen shot of my device manager and my sound devices with the HDMI plugged in - there is no option to select the HDMI as an audio device.

Any ideas?

Appreciate any help!

[IMG]file:///C:/Users/Peter/AppData/Local/Temp/moz-screenshot.png[/IMG][IMG]file:///C:/Users/Peter/AppData/Local/Temp/moz-screenshot-1.png[/IMG]

A:Windows 7 - HDMI out no audio - Intel HDMI audio

Try to set the SPDIF as the default audio device. That might work.

If it doesn't, try updating audio driver.

At last, as you said, your GPU driver is the last one, still, the problem might be right there. Usually, when the device manager shows the HDMI audio as functional and it still doesn't work, it's probably a GPU driver issue.

Try switching your GPU driver to older but stable versions.

On my case, nVidia drivers area always a pain in the *ss, so, when I successfully find a good and stable driver I stick with it for a long long time.

3 more replies
Answer Match 58.8%

Hi there

Brilliant little device for passing HDMI (less HDCP !!) plus RCA L, R Audio and 5.1 Optical Audio (SPDIF). Switchable audio pass thru,, 2Ch, 5.1 ch.
(Max HDMI input is 1080p so won't work for your 4K huge TV's though) - still an excellent little device for those who want to record from HDMI video.

(IMO the cheap ones are better than the expensive boxes as the expensive boxes don't strip HDCP from the HDMI output making some content not re-cordable with video capture devices or even software such as Audials).

AGPTEK HDMI converter. 21 EUR

AGPtek 1080P HDMI to HDMI Converter - Newegg.com

Audio quality more than good enough for games, movies etc. A really discerning audiophile might not be 100% satisfied - but it's not intended for Studio quality !!! More than good enough for me and I'm quite fussy.

Cheers
jimbo.

More replies
Answer Match 58.38%

Hi

Can anyone help me?

Basically I need to find a way of getting traffic passed out different Gigabit interfaces on a router depending on what destination and source address the packet contains.

For example all traffic sourced from 10.1.20.0 / 24 destined for 192.168.104.0 / 24 to go out of a different Gbit interface than say traffic sourced from 10.2.20.0 / 24 destined for 192.168.104.0 / 24 ?

Is this possible? If so can anyone shed any light?

Thanks
 

A:Advice on setting up policy route / route-maps

Well, you might start with the make/model of the router.
 

1 more replies
Answer Match 57.96%

Hi there

I actually LIKE the SKY Q package -- also now 4K UHD available - and it's cheaper than the SKY HD + if you are selective in what you choose (apart from the up front cost).

BUT

1) only 1 HDMI output at back of box so get HDMI splitter -- works fine and bypasses any HDMI restriction on copying etc.

2) if you want to RECORD to DVD recorder -- then there's no SCART or A/V outputs - so just get HDMI-->SCART converter --works fine. !!!

Note most DVD recorders still record at 576p - no probs really for older stuff and you can connect the output from the HDMI splitter into the converter for your DVD recorder.

I still use DVD recording sometimes to make physical DVD recordings of stuff I can't get elsewhere -- and then on the computer use MAKEMKV to convert the DVD recording to an MKV file for playing via streaming services such as PLEX.

SKY says this can't be done - but the Chinese 2 way HDMI splitter (use cheap powered version --the expensive ones retain HDMI protection !!!) works fine -- Max output though is 1080p.

iSolem 1x2 3D HDMI Switch Box - Splits HDMI Signals: Amazon.co.uk: Camera Photo

HDMI to SCART Composite Video Converter Stereo Audio: Amazon.co.uk: Electronics

Make sure though you use POWERED HDMI splitter --then no degradtion of signal.


I'm looking now at what to do for 4K UHD as well but AFAIK there's no way of recording yet a 4K UHD signal so I'll have to wait for somebody to come up with a way of ripping a live TV 4... Read more

More replies
Answer Match 56.7%

I'm trying to hook up my TV with my computer, and for the most part it's working. The video goes through and I get how to control it and everything. The only thing not working is the sound.

I'm using an HDMI to HDMI cable, and like I said the video is fine. Also, when the cable is plugged into my boyfriend's laptop, the sound comes out of the TV.

So this must mean the problem is with my computer specifically. Although, this computer is only a month old, so I wouldn't think anything is out of date.

I have no idea what's relevant, so I don't know what to post screenshots of, but I've read tons of other threads with the same issues but none of their solutions seem to work for me.

A:Realtek HDMI Output ATI HDMI Audio -Not Plugged In-

Info on your computer would help. We can only talk in generalites or suggestions without it. In most cases, if you have a full HDMI port with both audio and video, when you plug in an HDMI cable Windows changes the default audio playback device from the "Speakers" (your PC sound card) to "HDMI".

In your case the ATI (now called AMD) should be the device that is feeding the video and audio.

As your PC is only 1 month old, the PC vendor's tech support should be the ones to call since you haven't been able to find a solution to date.

2 more replies
Answer Match 56.28%

Hi to all.

On my Dell OptiPlex 755 E6550 2.33, I've had intermittent issues with the headphone socket suddenly stopping working for quite some time,sometimes problem is auto detected and fixed, sometimes I download a driver or three to resolve. This time nothing is helping no matter what drivers I've tried. Have Win 7 Ultimate installed with just on-board sound. No sound or audio shows up in device manager? Are 755's fickle with on-board sound or just too many sound drivers installed? Any ideas please.

A:Dell OptiPlex 755 No Audio Output device and no Sound/Audio in Device Manager

There could be multiple hidden audio devices.
* Press windows key + R* Enter cmd, click OK* Type cd\ [press Enter]* Type set devmgr_show_nonpresent_devices=1 [press Enter]* Type devmgmt.msc [press Enter]* Once the Device Manager opens, open Sound and see if you have multiple grey out items. If yes, delete them, then restart the computer and retest

12 more replies
Answer Match 55.86%

Hello quick question so i'm clear and to see what you would suggest.

I have a new upgrade LG 55 inch 4k TV connected to my PC via HDMI to GTX970 I've read this TV supports audio also via the same HDMI cable plugged in to my video card. I'm a huge gamer.

Right now I have a X-Fi Xtreme Gamer sound card connected to a 4.1 Logitech setup w/sub. I've been using this for years and it works great for surround sound when available and EAX is always a plus SO whats my benefit to 86 the 4.1 and just go HDMI?

In that case I lose the 4 speaker setup correct and just use audio from the TV?? I can't see the advantage for this unless i'm missing something big. I don't use SPDIF output or the Dolby digital or DTS encoder from the card I assume all that you need a receiver.

Can I use HDMI output for audio and STILL use my 4.1 speakers? I don't want to invest in a receiver or anything like that at this point. What would you do if you were me? i'm at work now but I read if I go into the sound properties/playback devices I can choose HDMI output? I'm curious to see how that works.

thx!

A:HDMI cable for audio or keep my 4.1 w/soundcard? need help w/HDMI

Windows only allows one default audio playback device. e.g. HDMI or Speakers (your sound card). HDMI audio is generated on a sound chip in the Video card. You don't have all the options you do with a Sound card.

9 more replies
Answer Match 55.86%

hi all,

I have my media center PC connected to a Sansung LCD TV through an HDMI cable.
Everything works fine; the PC detects TV and both audio and video travel through the HDMI cable from PC to TV

The problem happens when I turn the TV OFF and ON. In this case, the video is back but not the audio. This can be seen in the "playback audio devices" in "control panel", the icon that represennts the sansung speakers via HDMI dissapears.
Any idea of what to do? I got the latest video driver, which also deals with HDMI audio but no luck at all...

thanks

A:HDMI audio problem when connecting LCD TV to PC via HDMI

This is more of a HDMI handshaking issue than a Windows or driver issue, and a very common occurrence. Sadly if you do a Google search using "hdmi handshake no audio" for the search terms, you'll get lots of results but very little in the way of how to solve. About the best solution I came across is this one,

*Official* Asus Xonar HDAV1.3 thread - Page 271 - AVS Forum

A lot of that thread deals with the Asus Xonar sound cards, but there is also quite a bit about the no audio in general.

9 more replies
Answer Match 55.02%

I would like to configure a route delete and route add. 
 
from command prompt we type: route print
 
this gives us the gateway number
 
I think a route delete command should be "route delete" then 0.0.0.0 then the gateway number
 
advice on whether this is right and on how to do the "route add" configuration would be appreciated. 

A:How to configure "route delete" and "route add"

See This technet article

10 more replies
Answer Match 53.76%

Hi, i just recently got my convertible laptop. I have found ou that the audio doesn't work due to there being no audio output device installed, and after researching, I found out that there was a problem with the the Intel SST Audio Device. The device status stated:  "The drivers for this device are not installed. (Code 28)There are no compatible drivers for this device.To find a driver for this device, click Update Driver." I tried updating the driver but the computer could not find any drivers for the device.  Can anybody fix this for me please? Thank You.

A:No Audio Output Device installed and Intel SST Audio Device ...

Hi @JD_gin?,Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion x2 Notebook and issues with sound drivers not installed correctly. In the Device Manager, right-click on Double-click on Sound, video, and game controllers and select all that are listed and uninstall the Driver Software. Here is the download to the Realtek High-Definition (HD) Audio Driversp69248.exe. You could  try using the Windows Update Troubleshooting tool to fix any updates that have not come through for Windows.  Please restart the Notebook twice to make sure all update have been completed! You could also try in the Device Manager, click the arrow next to Display Adaptors to expand that categoryRight-click on Graphics and select Update Driver Software if more than 1 Graphics adapter do 1 at a time.Choose the option to Search Automatically for Updated Driver Software.The Notebook should find and automatically install the updated driverAfter the installation is complete, restart your Notebook.Please let me know how this goes.You can say thanks for trying to help by clicking the Thumbs Up below!.Thanks.

2 more replies
Answer Match 53.76%

acidentally uninstalled my speakers in the device manager...how do i reinstall them
 

A:Audio device - Reinstalling audio after removal from device manager

This is the Chat & Socialize forum :rolleyes:
We cannot supply technical support in this forum
You could select: Audio and Video forum, for your issue

Hi ypamela0912 :wave:

Please read the following:




B00kWyrm said:





You should read how to post a new thread in this Guide.Click to expand...


 

4 more replies
Answer Match 53.76%

I have been trouble shooting my sound for quite some time with no results. I've deleted and reinstalled drivers, checked bios, etc. no luck.here are my speccy details:http://speccy.piriform.com/results/hABYADp66DTHtJPioAZ4aF0and here's an example of the messages i'm recieving.

A:No Audio Output Device Installed/ Audio Device Disabled

What is new or different since the last time everything worked properly (ie, new hw, new sw, virus, error, etc)?

10 more replies
Answer Match 52.92%

Alright here's my situation:

I have a Core2Duo PC running Vista Home Premium 32 bit, hooked up to my TV using a HDMI cable. This has been working fine for 2 years now. Yesterday I decided to add some more RAM to this PC (4 GB instead of the standard 2 GB to be exact). I know 32 bit will only read 3 GB but I was thinking of upgrading to Windows 7 64 bit later.

Anyway I booted up the computer, worked fine of course, even watched a movie or two without problems. Then this morning I booted up the PC and I suddenly noticed the volume icon saying that there were no audio devices detected! I checked under Hardware and there are no audio devices whatsoever! So my HDMI cable is still giving me picture but no sound! Seeing as I'm using onboard audio I immediately booted into the BIOS and although I couldn't find a specific option that said onboard audio I did see something audio related being "HDA" (I assume HD audio) on automatic, the other option was ACRealtek97 or something. However it was enabled so no luck there.

Does anyone know how all of a sudden my HDMI cable isn't providing audio anymore? I even checked my Nvidia card which also stated that HDMI audio was enabled.

I hope anyone can help me, thanks in advance.

A:HDMI audio doesn't work, no audio devices detected.

hi and welcome to the forum's

Go to:

Control Panel > Sounds > Playback

Then click on HDMI sound and click on the Set Default button

1 more replies
Answer Match 52.92%

I have a client with a web server running Windows 2000 Professional. They also have a server on the network running NT 4. They have been told that there is a device that will route requests to the NT server if the 2000 server is down that costs about $100. I have not heard of such an animal, and if anybody can shed some light on this I'd really appreciate it. The device should somehow, I suppose, automatically detect that the machine at IP address A is not responding, and route the web request to IP address B. Anybody?
Thanks,
Michael
 

More replies
Answer Match 52.5%

Hello everyone!

First of all i would like to thank everyone for the answers and help you share and i am new to this forum. I tried to search before making this thread but i havent found any answer that could help me.

I just bought 2 LCD monitors ( Acer and Asus) they all work perfectly But i have a problem, a huge one. The Asus monitor refuses to work when the VGA (acer) is connected and vice versa.

The Asus is a 23" LCD monitor, its connected via HDMI.
The Acer is a 18,5" LCD monitor, its connected via VGA.
My laptop is an Acer 7736, 2,20 GHZ, 4 GB RAM, 1GB graphic card from ATI Radeon.
So i beg you please to help me, i have tried everything possible, been trying for the last 7 hours and i even downloaded Ultramon but it doenst work either.

I only want them to work in same time, what can i do?

Here is the link, i even tried updating the drivers on the graphic card but nothing works.
Thanks in advance!!!

A:HDMI trouble when VGA connected

A lot of laptops do not have the ability to go to more than two monitors (Edit: this is including laptop as monitor). You can probably have both work if you close your laptop lid, otherwise, only the laptop and VGA or laptop and HDMI will work. (Edit: if you close laptop lid, the two monitors VGA and HDMI will work but only with laptop monitor closed)

I think there is a piece of hardware you can purchase that can turn a USB port into and external display adapter, but I don't know if it was GFX card specific or if your card needs or supports a particular piece.

My laptop suffers from this as well. I tried it and confirmed it after seeing issue on this forum a few weeks ago.

9 more replies
Answer Match 52.5%

hello 
when i connect my TV ( samsung) with HDMI to my Sony vaio i can not play the audio on the TV( after i commute to AV- HDMI ) 
only after i reboot my laptop with the HDMI connected. 
after that i can play a movie with audio on TV. 

can u tell me why ? 
i run Win 8.1

thank you 
Alex 

More replies
Answer Match 52.5%

I have Quadro DVD-922 connected with HDTV via HDMI.

Video output is set to HD, but when I try to play an HD file - it doesn't work.

What should I do to be able to play HD videos?
 

More replies
Answer Match 52.5%

First of all sorry if it's not that Windows related!
So the problem is that my LCD TV has a scrambled picture when my computer is turned on and connected to the TV via HDMI. I got analog signal TV connection but the picture is fine while the PC is turned off. Yeah I know I should get digi TV but till then I would like to sort this out. The TV is a Samsung 40" LCD model LE40A336. It has 2 HDMI input ports. Tryed both with same results. BTW if I remember it right, I had the PC connected via VGA last weekend and didn't have this problem. I will double check it in the morning.
Maybe I'm using wrong setting with PC... wrong Hz or sth. Anyhow maybe someone has had similar problems and solved it.
PC:
GTX 470 DVI->HDMI
i5 2500K
Windows 7 x64
EDIT: The TV is the only monitor connected to the PC via HDMI. Sound is passing through the HDMI cable aswell.

A:TV scrambled while PC is connected via HDMI

  
Quote: Originally Posted by karelo


First of all sorry if it's not that Windows related!
So the problem is that my LCD TV has a scrambled picture when my computer is turned on and connected to the TV via HDMI. I got analog signal TV connection but the picture is fine while the PC is turned off. Yeah I know I should get digi TV but till then I would like to sort this out. The TV is a Samsung 40" LCD model LE40A336. It has 2 HDMI input ports. Tryed both with same results. BTW if I remember it right, I had the PC connected via VGA last weekend and didn't have this problem. I will double check it in the morning.
Maybe I'm using wrong setting with PC... wrong Hz or sth. Anyhow maybe someone has had similar problems and solved it.
PC:
GTX 470 DVI->HDMI
i5 2500K
Windows 7 x64
EDIT: The TV is the only monitor connected to the PC via HDMI. Sound is passing through the HDMI cable aswell.


the VGA doesn't transfer data signals through digital technology, it uses analog, that's why the picture appears correct on the VGA, the HDMi though uses a technology called HDCP handshaking, the PC needs to handshake the display for it to show the images being encrypted from the desktop, if that handshake doesn't take place then the image will appear scrambled.

you can read up about HDCP here High-bandwidth Digital Content Protection - Wikipedia, the free encyclopedia but your options are just to use the VGA cable, or if it is a software fault then ... Read more

6 more replies
Answer Match 52.5%

I have an Acer Aspire Laptop 57362-4790 running Win 7 with all the latest updates. Audio is an Intel(R) High Definition Audio HDMI, and Realteck HDMI.

Because I had no headphone output with the computer connected to my TV via the HDMI out I ran the Windows audio trouble shooter. I got a messaage "non standard audio detected" and Windows did something. Now my headphone jack works, but I have no audio on the TV from the HDMI connection.

I've checked both the Intel and Realtime audio controlers and gotten the message, "Device working properly."

I've searched both Intel and Realtime for new drivers and gotten the message, "Best driver already installed."

Opening sound, clicking on playback, clicking on configure, selecting speaker and clicking on test gives test tones out of both the left and right speakers on the TV. Going back to the web, still no sound!

Does anyone have any idea what Windows did and more importantly how do I undo it and get sound back on the TV through the HDMI connection?

Thanks for looking at this story, and any help you can give.

A:No HDMI audio after running Win 7 audio trouble shooter

Use the System Restore function and restore the PC back to a date PRIOR to whatever you did. That should return it to how it was configured. System Restore can be accessed from Start/Programs/Accessories/System Tools. System Restore will not delete any user data or emails.

2 more replies
Answer Match 52.5%

Hi,

Not sure if this is possible, but thought I'd toss it out there... I'd like to have audio sent via HDMI to my monitor while at the same time using the MoBo output jack for a subwoofer. I've only been successful with one or the other by itself in any configuration I've been able configure.

Any thoughts?

Thanks

A:HDMI Audio AND Realtek MoBo Audio Simultaneously

Does your monitor have an Audio Out? Some do. If it does, HDMI to the monitor, then audio out from the monitor to your subwoofer. Mind you plugging something into the audio out may turn off the monitors internal speakers. You won't know until you try
But…here’s the kicker! A subwoofers job is to not only produce lower frequencies but to also blend nicely into its satellites (speakers). This is most commonly accomplished by either designing the sub and satellites to work together in that the lower cut off frequency of the satellites is close to the higher cut off frequency of the subwoofer. The other is to have an adjustable crossover that will allow you to match the subwoofers higher cut off frequency to that of the satellites lower cut off frequency. You also need to match their output (sound) so that they are even (or close enough!). Otherwise you will get a lot of boom from the sub and not be able to hear much from the monitor.
Monitors with built in speakers are not designed with fidelity in mind. They have tiny amplifiers and do not go very loud without sounding terribly distorted. Even if your monitor does have an audio out, you may be presented with the impossible challenge in trying to match it to your subwoofer. Honestly, you are better off purchasing a 2.1 (or 5.1) computer speaker system. You can get something pretty decent for not too much money.

3 more replies
Answer Match 52.5%

I just connected my VIORE hdmi to my new PC with Win 7 Ati Radeon graphics and my screen picture is bigger than the display. Icons are cut in half on the left, cannot see start or time on the bottom or left or right. Display section calls it a CV TV15

how do I adjust the screen logical to fit the screen physical. This is the 1st monitor I have had that did not have buttons do do this
 

A:VIORE HDMI WIN 7I just connected my VIORE hdmi to my new PC with Win 7 Ati Radeon gra

You need to adjust the graphics settings for the correct resolution for the TV.
 

2 more replies
Answer Match 52.08%

Today my notebook Asus M50Vn suddenly started to behave weird. While it's connected to plasma via HDMI, everything starts to stutter a bit, which is very inconvenient in videos. It works like this: 0,5 s of fluid picture, 0,1 s of freeze, 0,5 s of fluid picture, and so on.

Situation is the same on primary (built-in) monitor and secondary (plasma), as well as on youtube, VLC, PotPlayer and MPC HC. DXVA and CUDA won't make any difference, choosing different video renders in player's settings won't do the help as well. I've already tried to install older and newer drivers (graphics is Geforce 9650m GT) but it didn't help.

Computer is 100 % virus free, there is COMODO IS for on-access security and I've also checked it with malwarebytes, hitman pro, emsisoft emergency kit, kaspersky tdss killer and CCE. Almost all processes are disabled.

It's interesting because there's no problems when plasma is connected via VGA.

Unfortunately there's no useful system restore points.

Does anybody have any idea what could be wrong? Thanks in advance.

More replies
Answer Match 52.08%

Hi I have a strange problem with my b540p Ideacentre. If istart the computer without an hdmi cable connected, the screen just doesn't start, it never turns on. However, if I turn of the computer, plug in an hdmi cable in the out port, and start it works (regardless of wether or not the hhdmi cable is connected to anything. What is the deal with this, and how do I fix it?

A:B540p Only starts if HDMI is connected

I have the same problem.  I was connect to LG tv from hdmi out and now I can't turn on my computer without disconnect hdmi. I've tried set from screen resolution and set to 'show desktop only on 2' and when i disconnect and restart then there is blank screen, but when i connect hdmi then it work.  Please help.

3 more replies
Answer Match 52.08%

Hey guys,

I'd really appreciate your expert assistance!

I've got an Origin Eon-17 SLX laptop that has recently gone out of warranty. I'm getting very frequent BSODs on start up, and it seems to happen almost every time if I have something connected to the HDMI output. It usually will BSOD, then restart fine.

I've tried a fresh install of 8.1, to no avail.

Please find the logs attached.

Many, many thank yous in advance!

A:BSOD often on start up, especially with HDMI connected

Hi mkbcnr33 & welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Thu Apr 9 03:42:31.874 2015 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\040915-4734-01.dmp]

Windows 8 Kernel Version 9600 MP (8 procs) Free x64

Built by: 9600.17668.amd64fre.winblue_r8.150127-1500

System Uptime: 0 days 11:14:33.575

Probably caused by : ntkrnlmp.exe ( nt!KiFastFailDispatch+d0 )

BugCheck 139, {3, ffffd000248f7500, ffffd000248f7458, 0}
BugCheck Info: KERNEL_SECURITY_CHECK_FAILURE (139)

Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd000248f7500, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd000248f7458, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
BUGCHECK_STR: 0x139

DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x139_3_nt!KiFastFailDispatch

CPUID: "Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz"

MaxSpeed: 2700

CurrentSpeed: 2694

BIOS Version 4.6.5

BIOS Release Date 02/14/2014

Manufacturer Notebook

Product Name P17SM-A

?????????????????????????????????????????????????????????????????????... Read more

3 more replies
Answer Match 52.08%

I have an Elitebook 8530p that I am trying to connect to my TV so I can view online TV on my TV screen. I can stream the online TV and watch it on the laptop ok, and I can connect the laptop to the TV with HDMI cord and I see the picture on the TV too, but as soon as I push the play button and it starts to stream the Laptop freezes. This happens on both TV's in our house with different HDMI cords which leads me to believe it is an issue with the laptop (not the TV's or cords). I have tried pushing the Fn + F4 buttons to clone it but that makes no difference. I have tried changing the display settings but I don't really know what I am doing! Another post said to choose full HDMI setting but even though the laptop has a HMDI port it didn't appear to have that setting. Is it too old?
 

A:Laptop freezes when connected to TV through HDMI

The problem is most likely the video card driver, so yes technically your laptop is too old, but luckily you can save that geezer! If updating the drivers doesn't work then you can try changing resolutions.

Solution found here:
http://answers.microsoft.com/en-us/...o/7fafd27d-816f-456c-afa6-3c7fec3909e3?auth=1
a. Click Start, and then click Control Panel.

b. Click System and Maintenance, click System, and then click Device Manager.
Note If Control Panel is in Classic View, double-click System, and then click Device Manager.
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.

c. In Device Manager, expand Display Adapters, right-click the display devices, and then click properties and under the driver tab click on Uninstall.

d. When you are prompted to confirm that you want to remove the device, click OK.

e. Restart the computer.

After the computer restarts, the drivers will be automatically installed. Check after this procedure. Also check if you have any exclamation mark or cross marks alongside the display devices listed in device manager.
You can update the drivers using windows update. Refer to the below mentioned link and use the steps provided accordingly -http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly

You may also check if there are any updates for the drivers at the manufacturer website. You may even install the latest drivers from the manufacturer... Read more

3 more replies
Answer Match 52.08%

Hi.  Last week and prior mths HDMI connection worked, TV had sound.  This weekend, 8-20-16, TV sound went away but still had video.  Looked at forums, utube and did the control panel sound device manager.  the Digital Display Audio-AMD High Definition Audio Device; not plugged in is grayed out.  clicked on it to no avail.  the set default is also grayed out so i cant even set a default.  PC speakers do work.  bought a new HDMI cable but no change.  all the drivers are up to date.  not really sure what happened.  worked for months and now no sound.  any idea????

More replies
Answer Match 52.08%

Hi everyone, I just got a new sound bar (Yamaha YAS-105) which only supports Dolby Digital 5.1 (AC3, I think) and I want it to smoothly transcode all of my DTS or newer audio to a multi stream AC3 in both MPC player from the latest K-lite mega pack, VLC and Winamp, or rather, if possible, just in general. If I play something thats DD5.1 in K-Lite's MPC it neatly picks up the audio and displays it as DD on my sound bar, same thing goes for DD5.1 in VLC etc. but as soon as I play something in DTS or higher there is no audio. I've been googling and tweaking the settings already and after messing around a bit it does play sound through MPC but none of my Dolby lights light up on my device and it doesn't sound like 5.1 either, the weird thing is that no lights go on, not even the PCM light just the TV light is connected and it gives a sort of stereo with subwoover sound (so 2.1). If anyone can help me out I'd be very grateful, I know it's possible because it works with media boxes as well, I just can't get it to work on windows... Any extra info, I have an Alienware X51 RC1, Soundbar is a Yamaha YAS-105, like I said it's hooked up via HDMI to my TV and my TV through a Digital optical cable to my soundbar.

More replies
Answer Match 52.08%

Hello, I just bought an HDMI cable to connect from my HP Pavilion x360 onto my TV. Unfortunately, I only get video on my TV but no audio. The audio only comes from my Pavilion x360. I am aware of right clicking the volume icon and clicking on "playback devices" to set defult the HDMI cable or TV. Unfortunaly, this is not visible even after enabling the disconnected and disabled devices. Please, anyone help so I can get the audio on my TV as well? I've let a screenshot. As a reminder, my HDMI is connected on both sides, and I have both disconnected and disabled devices visible. Thank you!

More replies
Answer Match 52.08%

Nothing is showing up on the TV. I selected the Extended screen option & nothing. I looked in Display Settings & no second screen is being detected. Even though on the TV itself. It reads that a HDMI is connected to the specific HDMI port. Windows 10 says my Drivers are all updated & my Displey Driver is AMD Radeon R7 200 Series

A:HDMI connected to Monitor & the other end connted to TV

If the title of your post is accurate.....then that will never work. You have to connect the TV to the PC with an HDMI cable and then do the same thing for the monitor. You need 2 cables. No other way around it.

3 more replies
Answer Match 52.08%

Hi,
I just did a fresh install of Win 8.1 last week and my TV which is connected via HDMI is not getting detected as a display on my PC. My monitor was detected fine.

When i right click my desktop and go to screen resolution, the TV doesnt show up there even post clicking detect. Same if i go into AMD CCC and click on detect.

However Win 8.1 can detect it. The TV is seen in device manager under digital media device and i can see the TV under Devices and Printers in Control Panel. I've tried troubleshooting it but it says everything is fine.
But I need it to come up as a display so i can use it as a primary display at times or to duplicate display.

I had no such problems with Win 7. It would detect right off the bat.

Things ive tried:-
I've installed the Omega 14.12 drivers and the Beta 15.4 drivers.
I've tried installing them in Win 7 compatibility mode too, but the installer then wouldnt give me the option to install the display driver and the HDMI audio driver.

One thing i notice is that the driver for the TV is provided by Microsoft and the date of the driver is 6/21/2006! So maybe this needs to be updated. I tried to click on update driver but it says my driver is up to date.

I also have all the latest windows updates installed.

so not sure what else to do here.

Please help.

A:Win 8.1 - TV connected via HDMI not detected as a Display

The 2006 device driver is simply the generic one which is normal, same one I get when TV is plugged in.
What HDMI port are you using? One on motherboard or one coming directly from GPU? This almost has to be a graphics driver problem.
Why would you try installing drivers in 7 compatibility mode? We are talking 8.1 here right? Have you tried drivers from manufacturers site?
A laptop or desktop? Motherboard and GPU make/model?
So, so many details you've left out.
Would help to have some system specs.

5 more replies
Answer Match 52.08%

Today my notebook Asus M50Vn suddenly started to behave weird. While it's connected to plasma via HDMI, everything starts to stutter a bit, which is very inconvenient in videos. It works like this: 0,5 s of fluid picture, 0,1 s of freeze, 0,5 s of fluid picture, and so on.

Situation is the same on primary (built-in) monitor and secondary (plasma), as well as on youtube, VLC, PotPlayer and MPC HC. DXVA and CUDA won't make any difference, choosing different video renders in player's settings won't do the help as well. I've already tried to install older and newer drivers (graphics is Geforce 9650m GT) but it didn't help.

Computer is 100 % virus free, there is COMODO IS for on-access security and I've also checked it with malwarebytes, hitman pro, emsisoft emergency kit, kaspersky tdss killer and CCE. Almost all processes are disabled.

It's interesting because there's no problems when plasma is connected via VGA.

Unfortunately there's no useful system restore points.

Does anybody have any idea what could be wrong? Thanks in advance.
 

More replies
Answer Match 52.08%

Hey guys,
I updated my windows 7 acer to windows 10 while i was connected to my tv screen via hdmi... but now my screen doesnt show up on my laptop at all. It only shows up once i connect my laptop to my tv via hdmi... so i cant actually use my laptop without my tv screen which is difficult while trying to study... i am desperate to get this fixed... if anyone has any ideas please let me know

More replies
Answer Match 52.08%

Decided to run this old laptop to my TV so that I could watch shows from online. When I connected using an HDMI cable the sound cuts in and out very bad. Thought the cable might be bad so I switched it out for a new high dollar cable but still has the same problem. Issue occurs both streaming and when testing using system sounds (such as "test" in the sound setup in device manager). Running Windows 10 (64-bit) and have installed all system updates and have tried updating the audio driver but it is saying I have the most up to date driver. Any help would be greatly appreciated.

More replies
Answer Match 52.08%

I get no sound when I connect my hdmi monitor my laptop

My monitor has no sound

How do I keep the sound on my laptop?

Thanks
OM
 

A:No sound when hdmi monitor connected

Try clicking the speaker icon in the lower right corner of your monitor, click playback devices, your monitor should be listed there and you need to set it as default.
 

3 more replies
Answer Match 52.08%

Today my notebook Asus M50Vn suddenly started to behave weird. While it's connected to plasma via HDMI, everything starts to stutter a bit, which is very inconvenient in videos. It works like this: 0,5 s of fluid picture, 0,1 s of freeze, 0,5 s of fluid picture, and so on.

Situation is the same on primary (built-in) monitor and secondary (plasma), as well as on youtube, VLC, PotPlayer and MPC HC. DXVA and CUDA won't make any difference, choosing different video renders in player's settings won't do the help as well. I've already tried to install older and newer drivers (graphics is Geforce 9650m GT) but it didn't help.

Computer is 100 % virus free, there is COMODO IS for on-access security and I've also checked it with malwarebytes, hitman pro, emsisoft emergency kit, kaspersky tdss killer and CCE. Almost all processes are disabled.

It's interesting because there's no problems when plasma is connected via VGA.

Unfortunately there's no useful system restore points.

Does anybody have any idea what could be wrong? Thanks in advance.

A:Notebook Is Slow While Connected To HDMI

Well normally I'd have said it was just your laptop struggling to upscale the image due to hardware limitations. But a 9650gt should be more than capable.
What happens if you disable the laptop screen and just use the tv as a primary monitor?

Erm.. Try a different HDMI lead and lower the resolution a little. But that's clutching at straws lol

5 more replies
Answer Match 52.08%

Hi, I was wondering if someone can help me.

I updated to windows 10 some months ago and realized my beats audio panel was gone. I few day back I re installed the High Definition Audio Device drivers and beats audio seems to came back.

I recently bought a denon amplifier and noticed very low sound when I connect the notebook to the amplifier through hdmi.
Is the hdmi sending the wrong signal? are there any new drivers for hdmi controllers or realtek sound card?
My laptop is a HP envy 17 j011nr (i think so) core i5 beats audio
Thanks a lot in advance!!!

A:Low sound when connected to amplifier through hdmi

Realtek shouldn't even be involved with the HDMI sound. I suggest to update your laptop's drivers and use "Intel Display Audio" as your HDMI driver. Set the volume to max then you're good to go.

2 more replies
Answer Match 52.08%

Hi, I was wondering if someone can help me. I updated to windows 10 some months ago and realized my beats audio panel was gone. I few day back I re installed the High Definition Audio Device drivers and beats audio seems to came back. I recently bought a denon amplifier and noticed very low sound when I connect the notebook to the amplifier through hdmi.Is the hdmi sending the wrong signal? are there any new drivers for hdmi controllers or realtek sound card? Thanks a lot in advance!!!

More replies
Answer Match 51.66%

After installing Window XP Home my system lost it's audio device. I check Controls+Sounds and Audio Devices=No Audio Device. How can I install an audio device.
 

A:No Audio Device on System How to Install Audio Device

10 more replies
Answer Match 51.66%

hi 
im using dell inspiron 15-3521 whenever i connect earphone/headphone to my laptops jack only the left side of the speaker work right side has no sound (inbult laptop speaker works fine).my friend asked me to download (0005-Win7_Win8_Win81_Win10_R279) driver from realtek web site and  I installed it and the problem was solved and this was about 6 to 7 months back
but now im facing the same problem i did the same what i did last time  i downloded and re installed the driver but of no use the problem still presists.
so plz guide me what to do to solve the problem.
thank you umesh.

A:audio problem when earphone/head phone is connected to 3.5mm audio jack

Test by switching between the Realtek audio driver and the Windows native audio driver.
1. Open the Device Manager (find it in the Control Panel, or type devmgmt.msc into the search box).2. Expand the "Sound, video & game controllers" and right click on "Realtek High Definition Audio".3. Select to "Update Driver Software".4. Click on "Browse my computer for driver software".5. Click "Let me pick from a list of drivers on my computer".6. Put a check in the box "Show compatible hardware" if not already checked.7. In the list of devices, click "High Definition Audio" (the native driver).8. Click "Next".9. On the Update Driver Warning box, click "Yes" (install the driver). 10. Restart the laptop if prompted. If not prompted, then no need to restart.[To get back to the Realtek driver, do it again but reverse the names in steps 2 and 7.]
If it still does not work correctly when the native driver is installed, then the hardware in the headphone jack has failed.
But if the same problem is there with the native driver then you should install a different version of the Realtek driver. I might be able to direct you to one but would need to know which operating system you are using.

10 more replies
Answer Match 51.66%

hi guys pretty new here so take it easy plz (lol)

i have 2 problems regarding audio.

1. when i upgraded my pc i added a okish motherboard but i wanted sound from my front panel so i took the jumper cap off the prongs for audio but now i have added some desktop speakers and want to plug them into the back of my pc but cannot remember which prongs to put the caps back on anyone any ideas plz.

now the hard one

2. i have a sapphire radeon hd4650 1GB graphics card inserted into my pci-e x16 slot on my motherboard and have a lcd monitor connected on the vga port and a full hd tv/monitor connected via HDMI port to hdmi port1 on tv. the picture is class when i have movies playing or game running but i dont have any sound what so ever. if i want to watch a film i have to connect my tv to my graphics card via the vga port and watch it like that (pointless having it connected via hdmi if i have no sound).

i have been trying since december to get it working but to no avail.

(what i have tried)

i did a fresh install of winxp installed all drivers needed, installed ati drivers from g/c driver cd then installed ati hdmi audio driver from amd site then the realtek hdmi driver and the microsoft uaa driver, and guess what no hdmi audio.

next i formatted and the installed windows vista did the same except the uaa driver as this was not required. and still no sound from hdmi.

lastly i installed windows 7 home premium. installed the latest ati drivers and the ati hdmi driver and... Read more

A:No audio from rear jack & no hdmi audio

I'm pretty certain that there is a cable that you have to connect from your sound card to your gfx card...

Sound over HDMI from GPU

If you have a Radeon HD 4xxx series or newer it should be setting up your HDMI by itself, though you may need a driver from the website. http://ati.amd.com

Also, check to make sure that when you're hooking up to your TV via HDMI that your sound options have HDMI/S-PDIF as default...





Quote:
In your sound control, located in the control panel, be sure that the hdmi device is set as the default. The hdmi device choice will be there if you're plugged up to your hdtv.

3 more replies
Answer Match 51.66%

Just got a Asus rampage iv extreme mb and not that I have everything setup I connected it to my tv. However the HDMI audio on my 5770 is disabling my onboard audio which is realtek (ALC898).

How do I fixs this? I have tried diabling it under audio settings and disabling the driver with no luck.

A:ATI HDMI audio is disabling onboard audio

hows your video connected? I'm guessing through HDMI or you using a vga,dvi or display port instead>? Are you trying to get audio through regular speakers? I ask if your video is connected through HDMI because that could be the cause because the video and sound both go through the HDMI cord and should project sound through the tv if it's connected through the HDMI.

9 more replies
Answer Match 51.24%

Hey guys, I'm actually new here, so I am not sure if this is in the right forum page, but I need help. I have had a problem with my HDTV and laptop for a few months and finally decided to start a thread for help. The problem is that the HDTV is blurry and fuzzy when connected to my laptop via HDMI. However, I realize this is an overscanning issue, because in the AMD Catalyst Control Center, whenever I set the scaling for overscanning to 0%, the fuzzy text and screen is fixed, but the edges around the screen like the taskbar are cutoff the edge of the screen. I do not think my TV has an option for "Just Scan", but maybe you guys can find something I can't. Here is the manual:

http://www.sansuiproducts.com/images.../SLED2280D.pdf

Also, I am running Windows 8.1 with an AMD Radeon HD 7520G graphics card.

Any help is appreciated, thanks.

A:Need help with my laptop connected to my HDTV (HDMI Cable)

Not sure I can help but I have the same thing. I have a cheap TV and I think it has more to do with that. I play videos is all and not an issue there, just desktop is expanded past screen.

My TV is only 720p.

I'd love to see if someone has a fix.

5 more replies
Answer Match 51.24%

System has two HDMI ports and one DVI. The DVI supports a monitor and HDMI is advertised as supporting two monitors. Neither of the HDMI ports are working. Contacted HP support and was told to return for warranty work (1 day old tower). Returned to store for replacement contacted HP support with second tower and was told same, return for warranty work. Contacted online support from another company went through several operations, drivers different connections, both monitor and TV and finally was told tower #2 was also defective. HP Envy 750-197c windows 10

A:Dual monitors not working when connected to HDMI

Hello @77-77-77,I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.If you are unfamiliar with how the Forum's private message capability works,this post has instructions. Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great weekend!

1 more replies
Answer Match 51.24%

Recently my hard drive went out and I had it replaced with a solid state drive. The problem I'm having now is when I hook up my Samsung Smart TV through an HDMI cable (also tried a new cable with same results) I get wavy, scrolling lines on my laptop that go away when I disconnect the cable. The lines don't show up on my TV and this didn't happen before having my computer repaired.

The Staples tech wants to charge me again for diagnosing it after paying over $270 for a diagnostics and replacement of the hard drive. He said it's not possible for it to be a problem with the new hard drive so it would be another charge even though it didn't do it before having it repaired and my computer reformatted. I'm concerned I'm going to burn something out if I keep using it this way but I also don't want to pay more if it's something simple. He said it could be the motherboard or graphics card but I'm not sure whether or not to trust him. I'm a senior with little technical knowledge.

I want to use an HDMI cable so I can watch Xfinity programming that's available online only. I can live with it doing this as long as it isn't hurting my computer. Any help or suggestions is greatly appreciated.

MSI Laptop - 3 years old
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 2
RAM: 3886 Mb
Graphics Card: Int... Read more

A:Scrolling lines on laptop when connected to TV through HDMI

6 more replies
Answer Match 51.24%

I have connected my HP Laptop with Windows 8 to my TV through an HDMI port. I watch netflix and youtube. A couple times a day the sound will just quit working. I check the audio and it says it is still hooked up to the TV. The only way I can figure out how to get it working again is to restart the computer. This has never happened while audio was playing, just when it is not in use for a little while.

Any help would be appreciated.

Thanks!

Luke
 

A:Laptop connected to TV through HDMI Sound turns off every now and then

HP has tens of thousands of different laptops. Which exact one do you have? The full model number will be on a sticker on the bottom and will be similar to DV9240ca or DV6-2130us.
 

3 more replies
Answer Match 51.24%

Hi all,
Toshiba Satellite U400-157
Windows Vista Home Premium Intel Core(TM)Duo CPU T5900@2.20GHz; RAM 4.00GB
Display Adapter: Mobile Intel(R) 4 series Express Chipset Family
Stage 1
Laptop connected to Panasonic LCD 42" with HDMI cable
Both LCD screen and laptop monitor diplay correctly
Able to change display settings and control cursor at laptop
Everything is working fine

Stage 2 two weeks later
When HDMI cable is connected, Laptop screen goes black, but the LCD screen works fine and the cursor appears on the LCD and can be controlled by the laptop

Stage 3 two (more) weeks later
When HDMI cable is connected, Laptop screen goes black, LCD screen is blank, no cursor visible
I right click laptop screen, go to Graphic Properties>Display settings and try and change the Operating Mode: from Single display to Two
Primary Device: LCD
But these choices are not available.
I go to Control Panel> Personalization> Display Settings
Drop-down menu shows
1. Generic PnPMonitor on Mobile Intel(R) 4 series Express Chipset Family
Select down arrow
2. (Default Monitor) on Mobile Intel(R) 4 series Express Chipset Family appears

Connected HDMI cable and try again
I have two Black Screens ...!
Have tried restarting comp then TV, and vice versa, before and after connecting HDMI cable, but nothing works.
(all other independent operations on the laptop and the TV work perfectly well)

Yelp, help, please ...
TIA
Mukund
PS I did not post correctly, so I ... Read more

A:Black screen when laptop connected to TV via HDMI

Hello, Do you have another HDMI cable to try , if not, do you have a VGA cable to use ?

26 more replies
Answer Match 51.24%

Hello, I am weighing up my options between purchasing an Ideapad 500s or a Thinkpad L460. I do a bit of video editing, and when I'm doing that kind of work I want to hook the laptop up to a 4k screen, (the extra pixels allow a much more efficient workflow). To connect to a 4k monitor at 60Hz I have read that I need a DisplayPort output (which I note that the 500s does not have), or an HDMI 2.0. I suspect that the Ideapad 500s does not have an HDMI 2.0 output, but I would be happy to be contradicted. Could someone please confirm this one way or ther other? Preferably if you could point me to some official documentation about the product which answers the question that would be great! If it does have an HDMI 2.0, I wonder if anyone has any idea how the nVidia chip would handle the 4k screen. I wouldn't be gaming or even doing and 3d modelling or rendering - just some HD video editing - so I expect it would be fine? Many thanks,Tom

More replies
Answer Match 51.24%

I fought this problem all day and I think I have it narrowed down. System is Lenovo Yoga 900 i7 with Windows 10 with all latest updates. Application is Citrix Receiver 4.5. When using Quickbooks with the Citrix Receiver, mouse clicks are disabled/not recognized.  All keyboard inputs still work, the mouse arrow tracks correctly, but mouse clicks seem to be ignored.  This behavior occurs when booting to dual monitor setup with HDMI adapter in the USB Type-C port; booting to single monitor (Yoga), then plugging the HDMIR adapter in the USB Type-C port.  The only resolution is to boot to single monitor (Yoga) and work in single monitor mode exclusively.  I am using the USB Type-C to HDMI adaptor purchased from Lenovo.  This occurs with the Yoga trackpad AND occurs with my USB wireless mouse. Also note with native Windows applications, the mouse works fine with both  monitors connected and active. I really bought the HDMI adaptor to use two monitor with the Citrix Receiver.  I have tried to Google this problem, but I'm unable to find a Citrix Receiver support site/forum that would be appropriate for this question. Any advice appreciated.

More replies
Answer Match 51.24%

www.sevenforums.com/sound-audio/228558-hdmi-sound-output-problems-2.html

Dear Experts

I am using windows 7 64 bit on my desktop (motherboard ASUS P5E)
ASUS - Motherboards- ASUS P5E

And I installed VGA SAPPHIRE HD 3870 (ATI RADEON Technology) 512 MB.
This VGA has a converter plug from DVI to HDMI.

Connected a 3 m HDMI cable from a converter to the Samsung TV.

I can see a picture on the TV but no sound

What I did for troubleshooting

1- download latest driver from AMD website from the link below :
AMD Catalyst
2- Follow the instructions here :
How to Set Up Audio on an ATI Radeon HD | eHow.com

No audio from HDTV when playing audio / video from a computer system

3- Digital Audio (HDMI) option was grayed out (not clickable) as can be seen in the snapshot below :

http://i46.tinypic.com/2d10aba.jpg

A:SAPPHIRE HD 3879 connected to TV via HDMI no sound

What is a Sapphire HD 3879? I can't find that model. I see a Sapphire HD 3870, is that what you mean?

Regardless, you aren't getting audio because DVI doesn't carry audio, so converting from DVI to HDMI won't give you audio.

8 more replies
Answer Match 51.24%

I have an external monitor with no speakers I use as a dual display along with my laptop monitor. No sound comes out of my laptop speakers nor when I hook up external speakers to it while I have the external monitor hooked up by the HDMI cable. Is there anything I can do to get this to work?
Thanks,
Bill

A:HDMI monitor no speakers-no sound from anywhere when connected?

Right click on the volume control and then Properties,

When you connect the HDMI it becomes the default output device, even though it has no speakers.

You need to change this back to "Speakers" and set as default.

5 more replies
Answer Match 51.24%

I have a brand new MSI Media Live box. The Installation process went fine except when it came to startup after installation. I always receive a blue screen and sometime I have the "irql_not_less_or_equal" message. The system works perfectly when I startup using the VGA connector. I have verified that HDMI does work if I startup using the VGA connector and then extend the desktop.

I have downloaded and install the Windows 7 driver from Nvidia. My card is Geforce 6150. The error descriped above happened using my Philips Tv and also my computer LCD screen.

Any Ideas?

A:Blue screen if startup with HDMI connected

If I remove the HDMI cable from the computer while it is starting up and plug it in again when the login screen has appeared then this works without problems. Also works when starting up from hibernation.

9 more replies
Answer Match 51.24%

I used to be able to connect my r11 to the TV and get sound.  For some reason, this has now stopped.  I have been through all the forums and tried various options to no avail. All help gratefully received.

More replies
Answer Match 51.24%

I have a Toshiba satellite L305-S5875 I have it connected to my Vizio HDMI HDTV to watch netflix with. It has been working fine except for the past week. When I unplug the laptop to skype and then plug it back into the tv when I am done I get a, "NO RGB signal" message from the tv. I don't know why it is doing this, I have been able to use system restore to get it working again, but it is no longer working. Any ideas?
 

A:laptop connected to HDMI tv was working now keep getting no RGB signal

Try this:

Hold down the input button on the right side of the Tv. This is the bottom button
With the tv off, press and hold the bottom button (input)

When the TV powers up and you see the input menu, release and press the button
to change the mode to your preference.

Hope that helps.
 

1 more replies
Answer Match 51.24%

Hi there;

I recently got a lenovo z710 ideapad to replace my previous laptop and serve as a substantial increase in gaming potential. I usually game with my computer connected to an lcd tv with an hdmi cord. However, with the new laptop I am having incredibly constant BSOD issues.

The BSOD has specifically occurred in Bioshock: Infinite and Deus Ex: HR (I have not yet tested any other games significantly). I am normally able to play fine for some time, however after gaming for a variable amount of time my computer blue screens after trying to load a new map or level (either by fast travelling, moving from one map to another, or just from loading a savegame).

In the case of Deus Ex, I can quickly and reliably produce the error, if I run the game and load a save, then quit to desktop and repeat, the BSOD will occur within 2-3 cycles. There was no problem when running the game while not connected to my tv, even after 10 or so cycles.

So far, I've tried the following based on what I could find on the net:
-Verified integrity of the affected games
-re-download affected games
-search error codes on Microsoft's website (no luck)
-Used the Windows ErrorChecking tool to check for hard disk errors
-Complete un-installation of NVidia drivers and safe-mode wipe using Display-Driver-Uninstaller tool

Nothing seems to have any affect. I think (hope) it's a software issue, as the computer did originally come with Windows 8, which I removed and replaced with the Windows 7 ... Read more

A:BSOD while gaming on tv connected via hdmi; nvlddmkm.sys

From the sounds of it, you have a problem with your graphics card, and because it's a laptop it sounds like an overheating issue. You have a bugcheck of 0x116 which is a video tdr error which is generally caused by a faulty graphics card. Download Speccy to monitor your temperatures. Then post a screenshot here.

Speccy - System Information - Free Download

Then can you please run a stress test with furmark by following these instructions.

Video Card - Stress Test with Furmark


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa800ec49010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff8800637e694, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.

Code:
fffff880`079eca48 fffff880`044bb140 : 00000000`00000116 fffffa80`0ec49010 fffff880`0637e694 ffffffff`c000009a : nt!KeBugCheckEx
fffff880`079eca50 f... Read more

9 more replies
Answer Match 51.24%

Hi! I have this monitor http://www.newegg.com/Product/Product.aspx?Item=N82E16824014146

and this cable

http://www.newegg.com/Product/Product.aspx?Item=N82E16812226013

Connected to a normal TV and HDMI to DVI cable to my lcd monitor at the same time it gave me an option at startup to switch to my HDMI source, but when I did all I saw was black on the LCD screen.

I was able to go into Display settings and switch it to HDMI manually but when it swaps to my lcd monitor its nothing but black again!

Do HDMI to DVI cables work for PS3s? My lcd monitor does not have a HDMI plug in. Only VGA and DVI

I'm hoping theres a trick to get this working or at the very least an adapter that wouldn't degrade the quality as much.
 

A:Playstation 3 and HDMI to DVI Cable connected to LCD Monitor

oh nvm my monitor dosent support high def outputs =\
 

2 more replies
Answer Match 51.24%

Hi, new here. After searching for information on my problem I could not find a single thread with the same issue.
Having said that, here goes.

I just bought a new TV and attempted to connect it to my laptop via HDMI. I have used both the laptop and the cable with other TV's in the past with no problem but when I connect the two the laptop powers off as if the power has been cut. It will not boot when the two are connected and only happens when the TV is on. The laptop will boot into safe mode but it seems that HDMI out is disabled in safe mode so I cannot test it. I have checked and my graphics drivers are current. Hope someone can help! Thanks.

More Information: I have since exchanged for a different TV (Different Brand) for an unrelated issue and it doesn't work with this one either, same issue.

A:Laptop Shuts Down When HDMI Connected To Television

I found this article on the Forum not sure if it will be any help

Computer shuts down while TV is connected through HDMI

9 more replies
Answer Match 51.24%

Hello
 
I am facing some issues, when connecting my Dell E6440 laptop to my LG 55LB650V flat screen.
 
I connect the laptop to the TV via HDMI-cable and I have been trying different cables. The computer has both an Intel HD Graphics 4600 and an AMD Radeon HD 8690M graphic card.
 
When I connect my computer to the TV the screen starts flashing black, every 5 seconds or so. Every time I open a new program the screen flashes and it is also happening sometimes when I do not use the computer.
 
The computer runs at 1600x900 and the TV is a full HD. I have tried to alter the resolution to both and I also tried to use a custom scaling level of 120 % (as 1920 is 120 % of 1600). I have also changed the refresh rate to 59p HZ and 60p HZ, but that made no difference. I have found out that if using the 60i HZ the screen would not flash (at least it have not yet).
 
So at the moment I can use the computer on the TV, but of course I would like to know why the screen is flashing when using 59p or 60p HZ and know what I can do, so I could use these refresh rates.
 
I hope that someone could make me wiser on this problem and maybe give me a solution. If anyone knows, I would also be happy to know what the best custom scaling level to use when using a 1600x900 laptop on a full HD TV is.
 
I really appreciate any help. Thank you in advance!
 
I have recorded two videos that shows the problem:
Part 1: https://youtu.be/DzKU0a0qiqo
Part 2: https://youtu.be/r... Read more

A:Dell E6440 flashing when connected to TV via HDMI

Can anyone please help?

2 more replies
Answer Match 51.24%

I connected the G50 to monitor and it not output any display.  VGA works fine but nothing from the hdmi.

A:G50 will not output video to hdmi connected monito...

Hi A1ci,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are facing issue with system not able to connect to external monitor through HDMI on your IdeaPad G50.
 

Have you checked with different HDMI cable?
Are you connecting to External monitor or a Televisition?
Please check if the Graphic driver is updated? If not please download the file from the support site and install it.

http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/g50-30-noteboo...
 
Hope this helps.
 
Best regards,
Hemanth Kumar




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Answer Match 51.24%

I recently found out that every time i plug in a HDMI or Auxiliary cable, my computer crash. I tried changing the cable to see if that was the problem and it wasn't. I just don't know where to look to start fixing the problem. I've considered that maybe the connector is faulty, but i'm looking for option before going to that.

I use HDMI to connect my TV for movies
I use the auxiliary Cable to connect a speaker.
on different occasion.

A:Computer crashes after HDMI/Aux cable is connected

Did you try shutting the computer down, plugging in the cable then starting back up? I've crashed a computer when plugging in a USB Thumb/Flash drive, turned out it was caused by static electricity that I'd built up walking across a carpeted room, now have anti-static touch pads on my desks to touch before anything else.

3 more replies
Answer Match 51.24%

As the title says, I've tried connecting my TV to my computer with an HDMI cable, and the video part works, but no sound plays. When I checked the list of playback devices, the TV appeared (as shown below), but it apparently cannot play sound.

I don't think I know anything beyond what I've posted, but if anyone could help me out with this, I would appreciate it.

Also, as a side note - I am completely unable to interact with any of these objects - I cannot set something as a default device; there is no response when I do it, and disabling the audio device only works until current sources of sound (like videos) are restarted.

A:LG TV not playing sound when connected via HDMI cable

If you highlight the LG TV you should​ be able to set it as default. If not, it sounds lik a permission issue (like non-admin account).

2 more replies
Answer Match 51.24%

Thanks for the update today Dell!
Been using my XPS 13 (9350) on 40" 4K monitor on TB15 dock and HDMI for a while at 30 Hz. Today, installed the updated video driver (2016-09-07) and got 50 Hz working with Plugable adapter! So, no need for the TB15 until it can also support 50 Hz or better
My setup:
Dell XPS 13 (9350) with latest drivers
PLUGABLE USB 3.1 TYPE-C TO HDMI 2.0 ADAPTER
Panasonic TX-40CX300E 40" 4K Ultra HD
= Jari =

More replies
Answer Match 51.24%

I have connected my XPS L502X laptop to my Samsung lcd tv using an hdmi cable.
I do not have clone display as an option. I can only extend the display. My guess is that this has to do with the tv display being run from the nvidia graphics card and the laptop display being run from the integrated graphics. 
I am running Processor    Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 2001 Mhz, 4 Core(s), 8 Logical Processor(s)OS Name    Microsoft Windows 7 Home PremiumInstalled Physical Memory (RAM)    6.00 GB
I have updated to the latest bios and the latest drivers for the integrated and the nvidia graphics.
Is there anything I can do to see the same display on my laptop and my tv?
Thanks in advance for any help.

A:How do I clone display on XPS L502X - connected to TV by HDMI

Geekeleh
I certainly suggest making sure that you have the most up to date video driver.  The latest Dell drivers may be found from the following link.
http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=XPS_L502X&os=W764&osl=en&catid=&impid=
You may want to creat an Optimus profile for your applications to ensure that the NVIDIA GPU is being used over the integrated Intel solution.
To create a new profile for an application:

1. Open the NVIDIA Control Panel.
2. Select Manage 3D Settings.
3. Select Program Settings tab
4. Click Add button.
5. Browse to and select the application executable that needs the new profile.
6. Or choose the preferred application from the drop menu.
7. Select the features and settings you wish to change for this application.

Don't forget the basics, try another display if possible and see if the problem continues.  Try another HDMI cable to make sure that the cable is alright. \
Please, let me know what you find out.
 
TB 

33 more replies