Tech Problem Aggregator

HP 9470m whitelist

Q: HP 9470m whitelist

I want to install miniPCI-E HP UN2400 (vid:03F0 pid:201D) modem in my HP 9470m? Please say me -this wwan card located in WhiteList of HP 9470m? (my bios ver - 68IBD Ver. 62 )

More replies
Answer Match 44.94%

Hi, I recently switched to a 9470m Elitebook folio - but the fan noise is killing me when docked in and standing on the desk near me. Is there any possibility to reduce the noise? Already done:- BIOS update- BIOS setting "fan always on on AC power" deactivated Windows 7 x64 Enterprise Already tried speedfan but it seems that it couln`t detect the fan. thanks

A:Fan noise HP 9470m

Its either a faulty fan or a faulty thermal sensor on the board. You need to call tech support to get a case loged to get the issue resolved.

9 more replies
Answer Match 44.52%

Trouble started with random system restarts anywhere from 2 to 60min after powering on. That lasted a few days. Than it got worse, it was stopping before system boot with error message: motherboard product information missing. After a soft or hard reset (can't remember now) it stopped displaying anything, only LEDs came on and fan run, all lasting about 5s. I tested RAM in other machine, OK. Pulled HD out, no difference. Put a different HD in, no difference. With DC disconnected and battery out I left CMOS battery disconnected overnight. Now it cycles: LEDs and fan come on for about 5s, all off for 1s and tries again. Any help will be appreciated... Best regards

More replies
Answer Match 44.52%

HiNot sure if my post was noticed as posted over weekend and got no reply so I'm trying again.Trouble started with random system restarts anywhere from 2 to 60min after powering on. That lasted a few days. Than it got worse, it was stopping before system boot with error message: motherboard product information missing. After a soft or hard reset (can't remember now) it stopped displaying anything, only LEDs came on and fan run, all lasting about 5s. I tested RAM in other machine, OK. Pulled HD out, no difference. Put a different HD in, no difference. With DC disconnected and battery out I left CMOS battery disconnected overnight. Now it cycles: LEDs and fan come on for about 5s, all off for 1s and tries again. Any help will be appreciated... Best regards

More replies
Answer Match 44.52%

Hi Guys.

I have a fresh image of Windows 7 on my laptop but it will crash frequently when connect to a VPN.

I have only tested this over WIFI and have yet to test over a wired connection.

I have attached the correct file but I think some files may be missing as I can't seem to get the Diagnostics Tool to do a full run through.

Any help would be appreciated

A:BSOD When Using VPN on HP Folio 9470M

Hi BinaryStar0647.

Your BSODs are caused by Sunbelt Personal Firewall driver, a regular BSOD causer which is disconnected from the market from December 2011.

Seeing your files I realized that the drivers are used by some other thing, GFI Software Firewall.

ITEMVALUEName [00000016] GFI Software Firewall NDIS IM Filter MiniportAdapter Type Ethernet 802.3Product Type GFI Software Firewall NDIS IM Filter MiniportPNP Device ID ROOT\SB_SBFWIMCLMP\0000Driver c:\windows\system32\drivers\sbfwim.sys (5.2.51.0, 117.78 KB (120,608 bytes), 15/08/2013 10:37 AM)
And it is the driver that is failing here.

Code:
fffff880`0358c670 fffff880`00df2110Unable to load image \SystemRoot\system32\DRIVERS\SBFWIM.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SBFWIM.sys
*** ERROR: Module load completed but symbols could not be loaded for SBFWIM.sys
SBFWIM+0x1a110
And not alone, but with other components too.

Code:
fffff880`0358c408 fffff880`046aadd3Unable to load image \SystemRoot\system32\drivers\SbFw.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SbFw.sys
*** ERROR: Module load completed but symbols could not be loaded for SbFw.sys
SbFw+0x11dd3
I would suggest you to uninstall GFI Software Firewall.

Let us know the results.

2 more replies
Answer Match 44.1%

Hello everyone...brand new member here! Looking forward to contributing to the forum!

I'd like to start out with a question that I'm hoping someone out there has an easy answer to! I'm the head of the IT department for work and have been working on better security for our company PC's. One of the biggies has been adding approved sites to a whitelist. Microsoft SteadyState has worked out fine for now, but it forces us to only use Internet Explorer. I'd love it if someone out there knows of a simple, cheap (or free preferably) method of creating a whitelist of URL's in both WinXP and Vista that would work with any web browser installed.

I'll also add that I can't do this through a physical firewall as it needs to be much more easily configurable/editable as the computers sit in multiple stores across multiple states!

So anyone have any ideas?

More replies
Answer Match 44.1%

When I attempt to login to Tech Support Guy a window pops up after entering my name and password. It reads:

"In order to accept post request originating from this domain, the admin must add this domain to whitelist."

Where is whitelist and why am I now receiving this message after years of no problem logging in?
 

A:Where/What is Whitelist?

Try accessing the site using this url: http://forums.techguy.org/ instead of others you may be using.
 

1 more replies
Answer Match 44.1%

I'm looking for the whitelist to web.de. They have an insane spam filtering system and getting emails to existing customers is tough unless they save and mark our domain as 'family or friends'.

Anyone have an idea of where their whitelist is hiding? Thanks!
 

More replies
Answer Match 44.1%

How to reset bios password with smc.bin file? I following instructions from HP support but still not success - as far as I undestand I cant enter into mode to let system read smc.bin file - anybody can help with that? After F10 I have been asking for password that is unknow and stop at that point :/ Any help will be welcome.

More replies
Answer Match 44.1%

hi can someone help me please with bios password for my folio 9470m i cant remember it plzz someone help me 

A:Hp folio 9470m Bios Pass

Hi @ARtan-Krasniqi? Welcome to the HP Support forum. Thank you for posting ! Folio is a lovely business class notebook. Most business class notebooks (including yours, Elitebook and Probook, etc...) have better security than consumer class computers. You will have to contact HP Support for business for assistance on removing the password. Here is how >> http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html>> http://www8.hp.com/us/en/contact-hp/business-support.html  HP Business support should be able to send you a customised SMC.bin file and instructions which you can use  to reset the password.  Hope this helps. Let me know if you face any issues.

1 more replies
Answer Match 44.1%

i cant install bluetooth driver in hp elitebook folio 9470m in windows 10. i check built in device in BIOS there is no bluetooth device present. is it possible thatFolio 9470m not have bluetooth device in some models ?

A:is it possible thatFolio 9470m not have bluetooth device in ...

@zubair044? Your BT is a combo of your WiFi card. What WiFi card do you have installed??? REO

1 more replies
Answer Match 44.1%

HI, I have an EliteBook Folio 9470m running WIN 8.1 Ent 64-bit. I have an issue with the Touchpad not working. I have installed the latest driver (sp66111) from HP Support and as a result only the PointStick and associated buttons work and not the Touchpad. Has anyone experienced this and if so what is the fix please? Incidentally, the Touchpad was working at one stage on this OS and ceased to work afterwards. I have re-stalled the OS from scratch withpout success either. Thanks in advance, Vik

A:Folio 9470m Touchpad Not Working

The touchpad might be turned off.Double tap on left top corner of the touchpad to activate/deactivate the pad.Also goto Control Panel>Mouse>Device Settings> Click on the touchpad/Luxpad>Click settings and check the settings.If this dosnt resolve then reinstall drivers from hp.com or from Recovery Manager.Using Recovery Manager to Restore Software and Drivers:http://support.hp.com/us-en/document/c03430118

5 more replies
Answer Match 44.1%

What's the Max SSD I can upgrade go on HP Elitebook folio 9470m . i7 -3667u, 8gb ram ?

A:Max ssd upgrade for HP Elitebook folio 9470m ?

256Gb is the tested capacity.I would expect it to work with greater capacity though.here are the quickspecs:http://www8.hp.com/h20195/v2/GetPDF.aspx/c04111459.pdf 

1 more replies
Answer Match 44.1%

I just recently purchased a Samsung 500GB SSD and I want to add this drive to my existing storage on my HP EliteBook Folio 9470m. The laptop currently has 256GB of SSD stock on it and I'd like to add an additional 500GB. I see that there is a connection that I'm missing. Anyone have the exact part that would service this connection?  Or try this link if pics don't show up  Pictures of what I'm referring to on my notebook  Thank you all!!  

More replies
Answer Match 44.1%

Hi there, I have an issue with non-responsive Brightness Adjustment on my laptop.  Symptom is that brightness does not increase or decrease when adjusting the setting using the FN Key + F9/F10 which are the designated buttons to adjust. There is also no change when I unplug from power outlett (which in theory should make the screen brightness come down). I have installed the latest bio, and have tried looking for new software/drivers, but to no avail... I simply can't reduce the brightness (and it's quite bright - to the point it is uncomfortable to use at night). Suggestions how to handle?

More replies
Answer Match 44.1%

Hello,In my company we have Hp 9470m Laptops.We have noticed some problems regarding the external screen showing some light distortion in a verity of screen types. If I use the DP port it will be O.K but via VGA the problem remains.Using different laptop on the same screen will show a clean picture with no distortion, so the problem is from the HP 9470m.  What can I do?Is this issue is something familiar?Thank you.

More replies
Answer Match 44.1%

I have an HP 9470m Elitebook that will not start up on a docking station. When starting up, it freezes on the "Please Wait" screen before login. I have tried it on 3 different docking stations with the same results. The BIOS are up to date. There is a driver update for the dock available, but it requires it to be plugged into to the dock, and when I dock the computer after start-up and try to install, I get the error message: ?Please connect at least one monitor to the dock and then continue.?  Unfortunately, this computer is also now just about 2 weeks out of warranty.

More replies
Answer Match 44.1%

We have 2 x Folio 9470m notebook. 1st has 8GB of memory with the upgraded ram using https://www.skhynix.com/eolproducts.view.do?pronm=DDR3+SDRAM&srnm=HMT451S6AFR8A&rk=20&rc=module  The 2nd only has 4Gb of memory and want to upgrade - I found this other memory cheaper - https://www.skhynix.com/eolproducts.view.do?pronm=DDR3+SDRAM&srnm=HMT351S6CFR8C&rk=20&rc=module  My understanding is the main difference is the what I already have is the Low Power (1.35V vs 1.5V). Does anyone know if Folio 9470m will work with this 1.5V version of the memory? Thanks for your help.

A:PC3 vs PC3L memory for Folio 9470m

From the Service Manual: Two customer-accessible/upgradable memory module slots DDR3 PC3-1600-MHz dual channel support Supports 16384-MB of system RAM in the following configurations: ? 16384-MB (8192-MB×2) ? 8192-MB (8192-MB×1 or 4096×2) The specified memory is 1.5 volt. DDR3L will run at either 1.35 or 1.5 volt but I generally avoid mixing voltages. That is why the DDR3L is working for you and I assume you have 2 of the same in the laptop with 8 gigs.  Can you figure out what is in the 4 gig machine now? I would not mix voltages or density...i.e would not have one module with 8 black blocks and one with 4. Try to match the existing 4 gig module is what I am saying...not the exact brand of memory but the characteristics of it. 

1 more replies
Answer Match 43.26%

Hi, I work in tech support for a company and one of our enterprise laptops mysteriously has lost its "tattooed" information.  The user who had this laptop left the company and when we went to wipe it we discovered this issue.  Upon starting the machine the HP splash screen has in red text on the top left of the screen "Manufactoring Program Mode set 1 of 10" after the splash screen a "Product Information not Valid" screen appears.  It reads: Product Information not validThe following product information programmed into the system board is missing or invalidSYSTEM BOARD (00A)Product Name Product Serial NumberProduct SKUProduct FamilySystem Board CT NumberENTER - Continue Startup For more information, please visit: www.hp.com/go/techcenter/startup I know that there is an HP utility tool to "tattoo" this information back onto the machine.  As an enterprise that uses 95% HP equipment (our monitors, mouse, keyboards are the only non-HP equipment) I think that the tech support deserves these types of tools to troubleshoot issues.  Sure the machine boots normally if you hit enter, but it's alarming/scandalous to be presented with that product information not valid screen when powering on a machine.  Bonus points to whoever can provide some reasoning as to how this occurred.

More replies
Answer Match 43.26%

Hi all,  I have a quick question. Recently I bought HP Folio 9470m from my friend. It came with HP original charger 18.5V | 3.5A 65W but when I looked under the battery on my laptop it says 19.5V | 2.31A  I google about replacement charger fo Folio 9470m and there is allot of it with 18.5V | 3.5A 65W.  My question is, how can I be sure tahat this is the right charger? If it is not, can this diference in Voltage damage my laptop?  













Solved!

View Solution.

A:Right charger voltage and amperage for HP Folio 9470m

MaxLAB wrote:Hello banhien, thank You for Your fast reply. Product number is: D3Q03AWHi, Thanks. I can see part # from your photo. It is not a right part, no idea what is it:               http://partsurfer.hp.com/Search.aspx?SearchText=608425-002 but this one            http://partsurfer.hp.com/Search.aspx?SearchText=609939-001 is used for more than 200 products and I can't find yours on the list. Regards.

5 more replies
Answer Match 43.26%

I cant Update My Hp Foilio 9470m Bios Driver he ask me to enter the password i try my adminitrator password but its not working my biomatric sensor not working for troubleshooting biomatric sensor i need to update my bios driver but i cant do this without password  is any one there who help me plzz.....

A:Hp Folio 9470m Bios Password Missing

@Us123 For that model you will need to contact HP and they should be able to send you a customized SMC.bin file which you can use at boot to reset the password.  http://welcome.hp.com/country/w1/en/contact_us.html When talking to the HP rep ask them to escalate your service request. REO

1 more replies
Answer Match 43.26%

Hi, after updating my HP Elitebook Folio 9470m to Windows 10 Pro 64, I am no longer able to shot down the PC.Every time I am trying to do a shot down, the windows screen turns into black for a few seconds and than reappears.I already did install the BIOS update version F.62 REV: A PASS: 1, as someone on the net said a BIOS update would help.Unfortunately this was not a solution. Thanks for your help

More replies
Answer Match 43.26%

Hi Team, I need Need SC.BIN file for HP EliteBook Folio 9470m Ultrabook. My Product Number is: D4R81UC#ACJ Kindly help me. Thanks,Abhiram

More replies
Answer Match 43.26%

I am the owner of a used Elitebook Folio 9470m laptop that I procured from my friend. It is very lightweight laptop, and I really love it.Unfortunately, the laptop came with admin password on the BIOS. I already contacted him, and he has no idea what it is. This was his father laptop, and he also has no idea about it. So, I'm left here with this laptop, but no way to tinker around with the BIOS. Obviously this isn't good!All sources lead me to this area where can I contact HP support to try to solve my problem.  I opened up two cases.  First one, case ID 4779632926 and did not get response. Second, 4779725521 and this is response i got. " I  really apologize for the inconvenience, unfortunately we will not be able to support this case."  I tried to reply to this case with subject <4779725521> and then I received message that case is closed. We are sorry, but we were unable to process your request.

The Case with ID "4779725521" is closed or does not exist and cannot be updated. PLS if there is any chance to solve this, let me know.  I can provide any information you need. Thank you.

More replies
Answer Match 43.26%

I bought this second hand HP Folio 9470m Elitebook and I am stuck at the BIOS password. I cant install an operating system on it as the secure boot is on and to disable it i need to entyer BIOS. Please help. I havent tried the password as i dont want it to be locked. I can provide the seriel number if required. Thanks heaapsss in advance.

More replies
Answer Match 43.26%

Hi, Appreciate if you can propose workable WWAN Card module that can operate and have the 4G/LTE functional in Malaysia. I'm using the HP EliteBook Folio 9470m with Windows 10 Professional (64-bit) installed on-board. I hv surf through and the only recommended WWAN Card is HP hs2350 HSPA+ Mobile Broadband Module which limited to 3G coverage. Is HP lt2522 LTE/EV-DO Mobile Broadband Module- U.S. only* (no Win 8 support), workable in Malaysia i.e,  Kuala Lumpur?  Rgds,Firdaus

More replies
Answer Match 43.26%

The ? is in the title.
 

A:Solved: What is a whitelist?

6 more replies
Answer Match 43.26%

I use OE and have a number of folders with rules for moving mail from incoming to other folders to keep organized. This includes several mailing lists. Until a week or so ago I was using Comcast restricted list to get rid of what I didn't want and just download. Afterwhich various senders would be filtered to folders.

Back on 10/2 Comcast started blocking my mailling lists. Turns out that I didn't have all members on the restricted list (limited to 200) and when these members bounced for not being on the lists (hadn't been for a long time but nothing ever happened until now) Comcast put the mailing lists on a SPAM list. Then their new upgrade caused other problems with the restricted list like anyone on it didn't get thru. I guess they are still working on it.

I can set up a whitelist with OE, but I haven't found a way to have incoming mail on the whitelist be moved to specific folders rather then just one folder so I have to manually move everything again after the fact, which is a real pain.

Anyone know how to set OE Mail Rules to allow another layer of mail rules to move from the white list folder? I know in rules when you add the address there is an option button. Is there some combination I can set up that will allow this?

I saw MailWasher was recommended, but unless it allows importing of addresses and email from OE I am not interested nor am I interested in having to decide if friend or foe. I don't want to even see foe mail. Also, I... Read more

A:Whitelist with filters OE

I forgot to use the option "does NOT contain" for my white list. Once I set that the rest of the email comes in and goes to the correct folders and the rest to SPAM Mail.

Sorry for bothering.
 

1 more replies
Answer Match 43.26%

Would there be a possible way to mark a program as trusted and prevent the security popup from showing when the program is run?  I would like to be able to run my VPN without having to deal with the popup every time I need to start it.

A:Security whitelist

See this thread: http://www.bleepingcomputer.com/forums/t/558301/disable-uac-notification-for-old-software-only/

2 more replies
Answer Match 43.26%

Just I wonder ? Is there a whitelist on this computer ?

A:Is there a whitelist on my computer

Yeah sorry...did not disappear until Intel Core 4th gen models and yours is Intel Core 3rd gen.  Compatible adapters: (21) WLAN module: For use with all computer models: Atheros 9485GN 802.11b/g/n 1×1 WiFi and 3012 Bluetooth 4.0 Combo Adapter 655795-001 Atheros WB225 802.11b/g/n 1×1 Bluetooth Combo Adapter 675794-001 Broadcom 4313GN 802.11b/g/n 1×1 WiFi and 20702 Bluetooth 4.0 Combo Adapter 657325-001 Intel Centrino Advanced-N 6230 WLAN module 670691-001 Ralink RT5390R 802.11b/g/n 1×1 WiFi Adapter 691415-001 Ralink RT3290LE 802.11b/g/n 1×1 WiFi and Bluetooth 4.0 Combo Adapter 690020-001 Atheros AR9565 802.11b/g/n 1×1 WiFi + Bluetooth 4.0 Combo Adapter for use only on computer models equipped with an Intel processor 690019-001 The one in bold looks like it would be good but this is an error in the Manual. That part number is actually a Ralink card I do not recommend.   

4 more replies
Answer Match 43.26%

I'm new here but I've been using Rkill64 for a while and was wondering if you've implemented a "Whitelist" for windows?  I've got an audio program on my system named "xonarswitch.exe that Rkill64 insists on killing every scan.  The program is legit and not rogue. The programmer is Giulio Sosio, program size is 1.38MB, product version = 0.09.0661, Product name = XonarSwitch, Orig file name = XonarSwitch.exe. It does run as a 32bit service.  Help on this will be much appreciated thanks.  

A:Whitelist for Rkill64?

Hi to BleepingComputer,
 
Please read this topic RKill - What it does and What it Doesn't - A brief introduction to the program if you want to cut to the chase search on the page for How to create a custom whitelist file for Rkill

1 more replies
Answer Match 43.26%

Hi,

My name is Neagu Valentin. I represent Class IT from Romania. We developed an application for windows OptimumDesk and our customers reported an issue with AdwCleaner and our update service. AdwCleaner find the folders where the updater service is installed and recommend the user to remove them.
 
This is a false alarm. How can i contact AdwCleaner and solve this issue?
Thanks,
Valentin Neagu

A:AdwCleaner Whitelist

Hi Valentin If you have False Positives to report for AdwCleaner, please do so in the thread below.http://www.bleepingcomputer.com/forums/t/571313/adwcleaner-false-positive-reporting-topic/Basically, run a scan with AdwCleaner, grab the scan log, and post it in the thread below. The information will be forwarded to Xplode who will do the adjustments.Thank you.

3 more replies
Answer Match 43.26%

We have a sizable XenApp farm - 40+ servers. ATA is currently notifying me of abnormal behaviour when users are logging in to their published XenApp desktops (i.e. when they hit a different server). Is there a way to whitelist or otherwise let ATA
know these are XenApp/RDS hosts and to expect users will have logons to these servers?

More replies
Answer Match 43.26%

We have over 400 xp machines that we use in a medical field. We have been getting a lot of virus lately that I have been fixing remotely via LogmeIn Rescue. All machines are loaded the same.
So i am looking at some options that would allow me to install software such as Anti Exe that would stop any other .exe .com .msi etc files from running without password permission. So if we want to install a specific program we can givem them the password to install it. However if they get a virus and it trys to install it would stop it. Anti Exe with a whitelist works like we want but a little pricey to do for 400 users.

Virus programs work ok but still always dealing wit virus so if u stop any executable files from running unless we approve it with a password. All of the machines are running windows XP and the user is Adminstator privledges.

A:Whitelist of Applications that Can Run

For 400 users, I would recommend going with a Domain Controller Environment behind a firewall and block unwanted sites like facebook, twitter, and other non-related sites. And prohibit accessing webmail.

7 more replies
Answer Match 43.26%

scanned my computer with avg free and came back with this message

C:\WINDOWS\Help\SBSI\Training\WXPPer\Content\Lib\U3L3Fe.swf";"A file caused a crash of the scanning engine at address 6abb94b4.";
Object is in whitelist

please help me fix this
 

More replies
Answer Match 42.84%

when I connect the laptop to the power network 220V or the battery laptop switches on itself (without push the power button).How Fix it?

More replies
Answer Match 42.84%

Computer - HP Elitebook Folio 9470m OS - Windows 10 Pro, 64 bit Processor - Intel CORE i5-3427U CPU @ 1.80GHz  2.30 GHz Display adapter- Intel HD Graphics 4000 Anybody know why this unit won't support dual/multi-screen display? When the second, external monitor is connected by VGA to VGA, nothing happens on the Control Panel/Display/Change Resolution page. The drop-down box where mulit-screen display should be selectable offers only "1. Generic Non-PnP Monitor".....and nothing else. Thanks for any insight.Michael




Better to have one and not need it than to need one and not have it.Michael

More replies
Answer Match 42.84%

hi everyone, i have a trouble with my laptop HP folio 9470m win 7 Pro 64 bit. that's about error BSOD of my laptop . Please help me, thanks so much

Attachment 341519

A:BSOD error Ntoskrnl.exe win 7 Pro 64 bit laptop HP folio 9470m

Please continue on your previous thread.

http://www.sevenforums.com/bsod-help...exe-87f7e.html

1 more replies
Answer Match 42.84%

Anyone with a clue on how to solve this problem

More replies
Answer Match 42.84%

Hi everyone, I have a trouble with my laptop HP folio 9470m win 7 pro 64bit . Please help me , thanks so much
 

A:Ntoskrnl.exe cause BSOD laptop HP folio 9470m win 7 pro 64bit

Try testing the hard drive and the memory. To test the hard drive go to Computer and right-click on the C drive, select Properties, tools, check now. Set a disk check on the next start up. Let the check finish. To test the memory go here:
http://www.memtest.org/
Download version 5.01 and burn it to a CD or DVD. Boot the laptop with this disk and run Memtest86 for at least 7 passes. No errors are allowed...
 

1 more replies
Answer Match 42.84%

Anyone with a clue on how to solve this problem

A:hp notebook folio 9470m product information not valid

Can you take a picture of message?




I am an HP employee.

1 more replies
Answer Match 42.84%

After having replaced an SSD the system shows a constant power button led on and the charging led is blinking white/orange.I removed the battery and even the clock-battery, with no help.The symptom shows when having the notebook on AC or/and battery. So I am not sure if the battery is dead, or if the notebook itself took some damage.Thanks for your advice. 

More replies
Answer Match 42.84%

card reader in hp folio 947m not work in windows 10 

A:Folio 9470m card reader issue in windows 10

@zubair044? Try installing this. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5271102&swItemId=ob_166654_1&swEnvOid=419... REO

3 more replies
Answer Match 42.84%

I am experiencing the following issue and hope that someone in the forum as an idea / suggestion. When I have the screen connected via via display port cable with the docking station and I have my laptop docked, I dont get any signal and the screen keeps black. This is independent of the Operating System - I used Windows 7, Windows 8. When my laptop is docked but I attach the display port cable directly to the laptop it works without any problem. I have also realized that with other displays 23'' or 24'' the setup with the docking station works without a problem. So it has to be a cominbination between UltraSlim Docking Station and ZR2740w screen. Any advise what else should be tried?











Solved!
View Solution.

A:HP ZR2740w and HP Folio 9470m / UltraSlim Docking Station

Update:  After calling HP technical support I and being bounced among various clueless offshore tech support reps, I finally landed on the US-based workstation support department.  Justin looked up the problem and identified it as a known issue and is replacing my monitor cable with one that HP says will work.   Also, in the meantime there is a workaround that I had figured out.  If you don't use the displayport port on the ultraslim docking station but pug the cable directly into the computer it works fine.  There is some inconvienence associated with this as you have to plug it in every time you dock and unplug it every time you undock (and of course the cable always falls behind the desk while you are doing this), but it is okay as a solution while I am waiting for the new cable to arrive.  Will update this post after it arrives and report whether it works.

10 more replies
Answer Match 42.84%

Gurus, Will someone help me in getting the Bios Administrator Password for my HP EliteBook Folio 9740 with SN: CNU313CK1B Appreciate your help Regards,TR 

A:Bios Administrator Password for HP EliteBook Folio 9470m

Hello Tejas, We would need the screenshot of F1 screen. To generate smc.bin file. best is contact HP chat support or phone support and send the f1 screenshot, they will generate in 10mins and provide it to u.




Regards;SmileyI am an HP employeePlease click the White Kudos star to say thanks for helping.Please mark Accept As Solution if my help has solved your problem.

1 more replies
Answer Match 42.84%

My den pc has Windows XP home edition, SP2. My ISP is Verizon Broadband (DSL) with Windows Live. I use IE7 to access the web. When I try to log in to tech guys website on the den pc I get the following message: "In order to accept POST request originating from this domain, the administrator must add this domain to the whitelist." I can view the website, I only get the message when I try to log into the website. I have never set up any whitelists on any PC and I thought that whitelists were specific to e-mail accounts and their protection according to what I have read on the web about them. I don't understand why a whitelist message would come up when I am not in e-mail, I am surfing the web. I don't have this problem with my bedroom PC which has the same set-up as the den PC. The only exception is on the bedroom PC I use Outlook as my e-mail. On the den PC all e-mail is accessed via the web, like hotmail.

Any help in resolving this would be appreciated.
 

A:Solved: Whitelist and web browsing

Ok, the whitelist problem is solved. Apparently you have to be very careful which link you use to access the tech guy website. Thanks for the help.
 

1 more replies
Answer Match 42.84%

I picked up a M83 tower and I'd like to put in a GTX1070. I've read about the whitelist and looked through the readme file and it seems to be a whitelist implemented by the Lenovo nVidia driver. When I got the computer I put in a new SSD as the system drive and installed a fresh retail copy of Windows 10 Pro. The driver whitelist shouldn't be an issue since I'm not using any Lenovo drivers, correct? I've also upgraded the PSU to ab EVGA 750W so that's taken care of too.

A:Graphics Card Whitelist

The whitelist is a function of the BIOS, not the OS.   I'll be interested in knowing if the 1070 works.  

1 more replies
Answer Match 42.84%

hi,i have lenovo G40-45 with Realtek RTL8723BE Wireless LAN 802.11n PCI-E NICi want replace with IntelŽ Dual Band Wireless-AC 3160when i replace the wifi card, it can't boot and says unauthorized wireless card my currrent systemAMD A8-64108 GB RAM

More replies
Answer Match 42.84%

I wanted to upgrade the WiFi card in my E6430 to one supporting Bluetooth and 802.11 AC WiFi. I was wondering if the BIOS has a whitelist preventing me from installing a non-Dell WiFi card.
I'm thinking of the AzureWave Broadcom BCM94352HMB/BCM94352.
Thanks.

More replies
Answer Match 42.84%

Hi all, I read that Wi-Fi cards are whitelisted because of FCC regulations, so only Wi-Fi cards that are tested to work correctly are added to the whitelist. HP has relatively low prices because it cuts cost on crappy network cards (which are good enough for most low level users, but not for power users). I want to upgrade to a decent 2.4GHz and 5GHz card with bluetooth support and multiple OS support (Broadcom). Broadcom cards are not officially supported for some reason (and no, I am not planning on buying an external Wi-Fi card for obvious reasons). So, my question is as follows: Could HP test some Broadcom cards (hint: they work) and add them to the BIOS whitelist. It would make the lifes of so many customers so much easier and HP would be able to distinguish themselves from other manufacturers. Please add more Wi-Fi cards to the whitelist. Kind regards,kvanzuijlen

A:Add Wi-Fi cards to BIOS whitelist

Hi, The series of machines like yours support the following wireless cards: Intel WiDi supportCompatible with Miracast-certified devices Integrated Wireless options with single antenna (M.2/PCIe):? Broadcom BCM43142 802.11 b/g/n 1x1 Wi-Fi + BT4.0 M.2 Combo Adapter? Realtek RTL8723BE 802.11b/g/n 1x1 Wi-Fi + BT4.0 Combo Adapter? Realtek RTL8188EE 802.11b/g/n 1x1 Wi-Fi Adapter Integrated Wireless options with dual antennas (M.2/PCIe):? Intel Dual Band Wireless-AC 3165 802.11 ac 1x1 WiFi + BT 4.0 Combo AdapterInternal Looks like your machine only has one antenna. Regards.

1 more replies
Answer Match 42.84%

I work in an educational institution, and we have tens of dozens of computer labs. The first time someone logs into one of these lab machines, we get prompted for "abnormal behavior". I would like a way to whitelist a group of machines from
this alert, as I know that certain users will only log into it a few times a year and/or many, many users will log into the same workstation. 

One of our summer sessions just started, and I am getting dozens of e-mails a day as students and faculty are logging into machines that they have not logged into before  (and may never again).  Makes alerting turn into background noise.

More replies
Answer Match 42.84%

My den pc has Windows XP home edition, SP2. My ISP is Verizon Broadband (DSL) with Windows Live. I use IE7 to access the web. When I try to log in to tech guys website on the den pc I get the following message: "In order to accept POST request originating from this domain, the administrator must add this domain to the whitelist." I can view the website, I only get the message when I try to log into the website. I have never set up any whitelists on any PC and I thought that whitelists were specific to e-mail accounts and their protection according to what I have read on the web about them. I don't understand why a whitelist message would come up when I am not in e-mail, I am surfing the web. I don't have this problem with my bedroom PC which has the same set-up as the den PC. The only exception is on the bedroom PC I use Outlook as my e-mail. On the den PC all e-mail is accessed via the web, like hotmail.

I hope I am posting this to the correct thread. Any help in resolving this would be appreciated.
 

A:Solved: Whitelist issues

You have some protection component on that machine that is restricting access based on a whitelist maintained in the computer. My guess is that maybe someone setup something like Site Advisor or the like. Do you get this error on any other site?
 

3 more replies
Answer Match 42.84%

I manage a few computers and would like to use windows 7 (None of the computers are attached to a domain) to block all other SSIDs other than the one I want them to connect to. These are desktop computers so I do not ever want them to connect to anything other than my network. Is there a way to do it? I have talked to a couple others and one said that the only way is to  have a custom script. I am willing to go that route if anyone could get me started. I know with Server it is much easier and there is acually and 802.11 policies section in the GPO. Unfortunately Server is not a possibility. Any help is appreciated. Thanks.

A:Whitelist/Blacklist SSIDs

Worth a read, IMO:  http://superuser.com/questions/197955/is-there-a-way-to-blacklist-hide-wireless-networks-in-windows-7-available-networ .
 
Louis

1 more replies
Answer Match 42.84%

Hi.
I want clear all my cookies with some exceptions
For that I use Click&Clean extension to clear all cookies, history, ... when Chrome closes,
for whitelist i use "Cookies" app (it has the "encrypted cookie storage"), it works great, but i don't know which the cookies i need add to whitelist, that keep me logged in to Gmail
Does anyone have any suggestions?

A:Cookies whitelist on Chrome

  
Quote: Originally Posted by JasonS


Hi.
I want clear all my cookies with some exceptions
For that I use Click&Clean extension to clear all cookies, history, ... when Chrome closes,
for whitelist i use "Cookies" app (it has the "encrypted cookie storage"), it works great, but i don't know which the cookies i need add to whitelist, that keep me logged in to Gmail
Does anyone have any suggestions?


I don't worry about cookies too much. Most of them are harmless. I use Click&Clean to erase them when they accumulate. Any of the sites you normally visit will drop a new cookie any way. I wouldn't worry about making a white list. If you visit an undesirable site you could check to see if they dropped a cookie and delete it.
I will delete the history and cache when it gets too large with C&C also.

3 more replies
Answer Match 42.84%

I have laptop lenovo z70-80 and i want to change my wifi card, i know that lenovo have whitelist on laptops.I can not find a list of allowed devices. Please, help, i need list of devices.

More replies
Answer Match 42.84%

Does AdwCleaner support adding a process to the whitelist. We use Citrix GoToAssist for support and it kills the connection.

A:AdwCleaner Whitelist Additions

I have advised the developer.

51 more replies
Answer Match 42.84%

I have laptop lenovo z70-80 and i want to change my wifi card, i know that lenovo have whitelist on laptops.I can not find a list of allowed devices. Please, help, i need list of devices.

A:Lenovo z70-80 wifi whitelist

Hello and welcome,
 
The whitelisted wifi models and FRU numbers are in the Hardware Maintenance Manual - Lenovo G70-70, G70-80, Z70-80
 
As you may know, a card must be a listed model and have a matching Lenovo FRU number to pass the whitelist. Just matching the model is not sufficient.
 
Z.

1 more replies
Answer Match 42.42%

Hello, After upgrading from Win7 to Win10, my system got stuck when uninstalling MS Office, and nothing worked anymore (File Explorer etc.). I tried to make a factory reset, which got stuck, too, and no OS would be detected anymore. Then I tried to reinstall Win10 64 bit, which brought be a bit of trouble. I have an HP Folio 9470 with a 320 HDD and a 32 GB (I believe) mSATA. During my Win10 reinstall, I ran into trouble and then deleted all partitions on both drives and reformatted everything because I thought that was the method for a clean reinstall. First, I installed Win10 on the 320 HDD, but my BIOS did not appear to allow this (although harddisk was in the legacy boot options), which the Win10 installer had already warned me about, so I could not boot from my HDD and thus could not start Win10. Next, I reformatted everything and installed Win10 on my mSATA. However, the Win10 installer and later Windows 10 only showed a size of 11GB for the mSATA. The installation itself already took up 11GB and there was no space left for necessary drivers and updates, and Windows 10 malfunctioned. My feeling is that the mSATA was larger than just 11GB, but that a part of it is not shown any more after deleting partitions and reformatting. After multiple reinstalls, I do not know what to do any more. Any idea what how I might get a functioning version of Windows 10 on my HP Folio 9470m? Best regardsFrank

More replies
Answer Match 42.42%

Hello, After upgrading from Win7 to Win10, my system got stuck when uninstalling MS Office, and nothing worked anymore (File Explorer etc.). I tried to make a factory reset, which got stuck, too, and no OS would be detected anymore. Then I tried to reinstall Win10 64 bit, which brought be a bit of trouble. I have an HP Folio 9470 with a 320 HDD and a 32 GB (I believe) mSATA. During my Win10 reinstall, I ran into trouble and then deleted all partitions on both drives and reformatted everything because I thought that was the method for a clean reinstall. First, I installed Win10 on the 320 HDD, but my BIOS did not appear to allow this (although harddisk was in the legacy boot options), which the Win10 installer had already warned me about, so I could not boot from my HDD and thus could not start Win10. Next, I reformatted everything and installed Win10 on my mSATA. However, the Win10 installer and later Windows 10 only showed a size of 11GB for the mSATA. The installation itself already took up 11GB and there was no space left for necessary drivers and updates, and Windows 10 malfunctioned. My feeling is that the mSATA was larger than just 11GB, but that a part of it is not shown any more after deleting partitions and reformatting. After multiple reinstalls, I do not know what to do any more. Any idea what how I might get a functioning version of Windows 10 on my HP Folio 9470m? Best regardsFrank

More replies
Answer Match 42.42%

Hey I cant install driver of bluetooth and mobile broad band for my HP folio 9470m in windows 10 64 bit OS plz help me out i try windows 8.1 drivers but they did not work.

More replies
Answer Match 42.42%

watching a hijackthis analyst clean up malware from an infected computer has become a hobby for me.
i have noticed that system32 files get alot of focus. i can't tell if they are missing or not, most anaysts don't elaborate on why they do what they do, but when an analyst repairs a system32 file, it's probably because it's infected (my guess).
is there some kind of whitelist available that says "these are the common legitimate system32 files", or maybe even a blacklist like "this is a surefire infection system32 file", or some website dedicated to system32 files with a dialog box where you put the name of the file in there and push "enter" and it tells whether it's legitimate or not, or common for a certain location.
not only that, but i would be interested in any kind of resources that help hijackthis analysts.
sorry if i posted this in the wrong place. thanks, Ed

A:Can I Find A System32 Whitelist, Blacklist, Or Both?

Although I do not get the impression that you are actually doing this on your own computer, I feel obliged to give a warning just incase yourself or others decide to do such a thing. Messing around with and deleting files in the System32 folder can have serious implications; the computer can be rendered inoperable and a format will be necessary.As for researching file names, I would personally say that in the early stages, Google is your best friend. Typing in the whole path and filename will generally give you reliable results as to whether it is legitimate and necessary or malware-related. It was certainly a great help to me when I began my HijackThis training. Over time however, you learn to understand which are the common (legit) files on a computer, and any that you do not recognise starts to ring bells and you investigate further. Whilst it is not always the case, and infact some harmless files do this as well, a tell-tale sign of a malware file is a long string of random letters and numbers. Something like C:\WINDOWS\System32\H7jkI00mLGyAnn98.exe is going to be malware 99% of the time. if you are interested in learning more about malware detection and removal, we do offer a HijackThis training programme here at BleepingComputer, but as far as I know we are not accepting applicants at the moment. Obviously this is extremely popular, and with only a limited number of mentors, if we accepted too many people we would be completely snowed under. Malware Removal Training Pro... Read more

2 more replies
Answer Match 42.42%

Hello

I use Emsisoft Online Armor and I recently tried to create a whitelist of allowed countries instead of
a blacklist.
This works fine except for two sites : wilderssecurity.com and... malwaretips.com !!!

I cannot access to MT in spite of the fact that I allow USA. Normally the IP of MT is 198.1.119.172 and it is supposed to be in the USA, no ?

OA doesn't show me the US flag for this IP but this : "n/a"

Do you know what country I must allow in a OA whitelist to be able to go to malwaretips.com ?

Thanks
 

A:OA whitelist : unable to access to malwaretips.com

The ips might not have present in the Geo IP module of Online Armor.
 

3 more replies
Answer Match 42.42%

I have a Mac (Snow Leopard), Dell Vista laptop and a Gateway Vista 64 bit PC. I can connect to both the Mac and Laptop from the PC, but can't connect to the PC with either the Mac or the Laptop.

With each failure, I get the following message. "You are blacklisted or not whitelisted by this partner."

There is nothing on the blacklist and I can't find anyplace to whitelist them.

After more testing, the PC will connect to both the Mac and the Laptop
The Mac will connect to the Laptop but not the PC
The Laptop won't connect to either the Mac or the PC

Would appreciate any help here.
Peg
 

More replies
Answer Match 42.42%

I have the N586-20180. I want to upgrade the wifi card but I can't find the whitelist to pick a pre-approved wifi card. Does anyone know where I can find it?

More replies
Answer Match 42.42%

Need to delete whitelisting on WiFi cards, so I can upgrage wireless card to Intel 6250 2x2.  Now have Intel centrino N1000 and it is a 1x2 and fastest HP allows in Bios.   Please tell me how to include in Bios or delete whitelisting.    John H.

More replies
Answer Match 42.42%

im trying to add aimexpress.aol.com to my whitelist so i can allow the popup with my friends list to come up, i dont know how to do this and when i googled it i got some confusion on different approaches and i cant figure it out can anyone please help im running vista premium
 

A:adding sites to whitelist with vista

I am going to assume you are referring to IE7.

To allow automatic pop-ups from a specific website
1. Open Internet Explorer by clicking the Start button , and then clicking Internet Explorer.

2. Click the Tools button, click Pop-up Blocker, and then click Pop-up Blocker Settings.

3. In the Address of website to allow box, type the address (or URL) of the website you want to see pop-ups from, and then click Add.

4. Repeat step 3 for every website you want to allow pop-ups from. When you are finished adding websites, click Close.
 

1 more replies
Answer Match 42.42%

I have whitelisted a few websites I used multiple times daily because I want to help support them. I don't know exactly when this started, but I noticed today that ads were blocked on those sites.
I went back into AdBlock and noticed they no longer appeared in the list of unblocked sites. I set them back up again, but nothing happens. The ads on those sites are still blocked. I am using the AdBlock extension on Edge.
UPDATE: Okay, after exploring a bit I enabled the "button next to the address bar." Using the menu that pops up from the button, I was able to get the whitelist feature to work. For some reason it seems to have stopped working from AdBlock's settings menu as it did before.
Mike

More replies
Answer Match 42%

So i'm using a Folio 9470m at work on a 2013 Ultraslim Docking station with 2 Display Port connectors, but if i attach two screens to those it only displays them as one device and mirrors the image on both screens. Furthermore if i go into the screen and resolution settings, both identify as screen 1, but i can set 3840x1080 instead of 1920x1080 and at that moment the picture will span over both screens as one. The downside to this is that the login screen, windows i open for the first time, they're all gonne appear in the middle where the bezels are, it handles them as one bigger screen and not as 2 screens that extend each other. I need them to be detected as 2 seperate screens, and so far i have had no success. Has anyone experienced this or knows a solution? I really don't want to connect the second screen via VGA. Can the folio handle 2 display port connections on a dock? Is this maybe the cause?

A:Folio 9470m DUAL Display Port on HP 2013 Ultraslim Docking S...

As far as I know the  Folio 9470m doesnt support more then one external display.  I think you can verify this by having a look at the quickspec document for the model.

3 more replies
Answer Match 42%

Dear HP Support, i am the happy owner of an HP 6710b (year 2007/2008 model) notebook.Of course now it is a little bit dated. So i decided to upgrade my wifi card (intel) to a new Intel wifi card which supports the 802.11n standard. Unfortunately i discovered that HP uses BIOS based wifi card whitelists to prohibit the user to upgrade the wifi card. When i bought the notebook HP never mentioned it. HP advertised that the notebook has a mini pci express slot. Therefore i concluded that every mini pcie standards compatible wifi card would work. My Questions: 1. Why do you use bios whitelists ?2. How will you fix this ?3. When will you fix this? 4. Which models are using a whitelist? Does HP sell any Notebook/netbook without a bios whitelist?  Thank you.   

A:HP notebook wifi whitelist (card upgrade)

Hi,The first 3 questions are for HP guys but I'm not one..HP provide service manuals for its products and you may find all compatible components in there. The whitelist contains all the part numbers from the service guide so when you want to upgrade a laptop, find the component in the service guide or choose the best you can get if more components are available..The guide for your laptop: http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSer...There is an Intel 802.11a/b/g/n compatible wireless card. The part number is: ?441086-001?(for the US etc, see the manual for the right pn))I think it's a WiFi Link 4965AGN. The part number is important because the same WiFi Link 4965AGN for the UK or other European/Asia countries will be probably different (use different wifi regulations than the US).This one should work:http://www.ebay.com/itm/HP-Mini-PCIe-802-11-A-B-G-N-WLAN-4965AGN-New-441086-001-/330611825906?pt=PCC...? 

9 more replies
Answer Match 42%

I am working in a call centre where have a online contact form, when it submits it sends the data directly to the dialler and is then called almost instantly by our agents.
The problem we have is recently our dialler got hacked and we had to increase our security. We had to whitelist any IP addresses that wanted to access it externally.
Since this has happened the form does not send any data in to the dialler.
The website is hosted on Namesco. We have whitelisted the IP address for the Namesco server (where I assume the PHP script is run) and also the IP address for our website where the form is hosted.
None of the above has solved the issue. We now have no idea on what IP address to whitelist on the router to enable the form to start feeding the data in to the dialler again.
We have no idea what to do fix the issue. All help or advice is highly appreciated.
Thanks, James

More replies
Answer Match 42%

I have a ThinkCentre m58P and have tried 2 cards in the machine to no avail. One just wasnt recognised the other gave bios bleeps. I want to turn this PC into a media streamer from as NAS server and need a HDMI output compatible Graphics card for this machine? Can anyone recommend whats on the whitelist or fully functions wih the M58p?

A:ThinkCentre M58p Graphics Card Whitelist

Can't recommend a card, but just wanted to make sure you knew that you don't have to have a graphics card with an HDMI port on it. The signaling for HDMI and DVI are identical, just different connectors. I have a cable that has a male DVI connector on one end and a male HDMI connector on the other. I connect from the DVI port of an ADD-2R card directly to my TV. There are also DVI/HDMI converters that accomplish this same task using the converter and a standard HDMI cable. Check the parts listing for your machine on the support site to see which graphics cards are supported for your model.

7 more replies
Answer Match 42%

Hi!

I am looking for a whitelist for my motherboard. I am planning on adding an external graphics card to my laptop, and I need to use a PCI-e slot that I think is used up by the network card. The graphics adapter is in this link:

http://www.amazon.com/Laptop-External-PCI-E-Graphics-Ca...

I have a Toshiba Satellite C75D-B7230 with an AMD A6-6310 and Radeon R4 integrated graphics. I have a network adapter that uses a USB slot so I have a means of accessing wireless networks.
My fear is that when I remove the network card (which I believe is interchangeable) the BIOS will not load because some manufacturers create a list of mandatory hardware that is necessary to boot the PC. I will try to remove the card and reboot, but I don't exactly want to get into a mess and then mess up my PC. It has already taken a trip to the shop due to a fan failing.

If anyone can figure this out, that would be great.

Thanks!
 

More replies
Answer Match 42%

I've hit the whitelist issue before attempting to upgrade my Helix WLAN, so am not keen to spend the money to discover it wont post with a new drive. Can anyone say if the Helix has any whitelist for mSATA SSD? Or should I be free to install any compatible drive? Considering giving mine a bit of a refresh and installing the Samsung 850 EVO mSATA 500GB SSD.




____Lenovo Helix i7 256gb... wish I bought a Surface Pro for better support...

More replies
Answer Match 42%

I bought one HP laptop two years ago. The model of my laptop is HP Pavilion 15 e066tx. I found bluetooth is not supported by the default wireless card with the model Realtek 8188EE. So I wanted to change the wireless card by BCM4357. But when I booted the laptop after I changed the wireless card, it showed "104-Unsupported wireless network device detected." So I had to change the default wireless card back. I flashed the latest BIOS which was released at April 2014 but it was still no available. So I found there is a wireless card whitelist in the BIOS. If the model of the wireless card is not contained in the BIOS, it will never be supported. I think this laptop model is out of warranty, so I ask for remove the wireless card whitelist from the BIOS or add the model of BCM4357 in the BIOS. Thanks.

A:Remove the wireless card whitelist from the BIOS

Hi @moreshare, Welcome to the HP Forum! Thank you for joining the HP Forum community.  It is a great resource for information, tips, and solutions that have helped others. Here is a link to First Time Here? Learn How to Post and More as a guide should you have any concerns or questions about the process. I grasp that you would like to update your wireless card to one that support Bluetooth.  You wished to install the "BCM4357", but after completing the  installation of  the card, you realized that it was not compatible.You tried updating the bios, but there was no change. You would like assistance in altering the bios.I am not able to assist you with altering the bios, but here is a link to the HP Pavilion 15 Notebook PC Maintenance and Service Guide. Please note chapter 3, page 26, item 20 for the recommended wireless cards replacements, that have been tested and known to work with your model.  Please let me know the outcome. When you have resolved your difficulty, would you choose "Accepted Solution" on that post to alert other members and visitors to your success and perhaps help them. To show appreciation for my help. please click the "Thumbs Up Icon" below.

8 more replies
Answer Match 42%

Hi, I want to upgrade my old wireless card Atheros AR9285, but i read some issues with whitelist on lenovo bios...Can you help me to choose the best Wireless adapter and hack this whitelist?My routes is an Archer C9 from TP link, dual band AC, so i need an AC wireless Card.What Wireless card i should by? Thanks for aswering. Raffa 

A:Lenovo G460 - Wireless Upgrade/Whitelist

You should look at the parts list in your service manual.  This can be found online (see support tab on this page) under the documents for your notebook.  There are only a few options to choose from and if a desired device is not present in that list it will usually not be allowed by the BIOS.
 
Also - you should only purchase and install WiFi cards "branded" for Lenovo by Lenovo.  If it is stated to be compatible by seller but does not cary Lenovo branding it may not work in your notebook.
 
The "whitelist" idea was created to keep support options limited to a smaller group of known good and tested devices.  This minimizes complications with troubleshooting and online support agents knowledge of products.
 
Good luck.
 
CB

3 more replies
Answer Match 42%

Hello world,Recently I've bought a 2nd hand Compaq Presario C500 machine for the insane amount of ?25. I had some ram laying around so I buffed it to 2 gigabytes and decided it will do juuuust fine as a replacement for my almost dead Acer Travelmate 2420 laptop which was used as a small server. Replaced the 80 gigs drive with 800 gigs one. Installed everything I needed - great. Laptop is flying it.System: Host: andrzejl.eu Kernel: 4.6.3-1-ARCH i686 (32 bit gcc: 6.1.1) Desktop: N/A dm: N/A Distro: Arch LinuxMachine: System: Hewlett-Packard (portable) product: Presario C500 (GC193PA#ABG) v: F.24 Chassis: type: 10Mobo: Hewlett-Packard model: 30C6 v: 78.10 Bios: Hewlett-Packard v: F.24 date: 04/25/2007The only thing that I didn't liked about it was / is the wireless card.Network: Card-1: Broadcom BCM4311 802.11b/g WLAN driver: b43-pci-bridge bus-ID: 06:00.0 chip-ID: 14e4:4311So I've decided to replace it. Mainly because its a) B43 chipset b) not working with N band.I've purchased this card:http://www.ebay.ie/itm/300893674625?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AITWhen it arrived I quickly popped the little hatch at the bottom of the laptop, swapped the cards and was pretty dang happy with myself just until I saw the fadoodled "104 - Unsupported wireless network device detected. System halted ? remove the device and restart? error.        So I've decided to upgrade BIOS from version F.15 to version F.24 to see if... Read more

More replies
Answer Match 42%

Hi,I have a very simple request, I want the list of whitelist wireless cards that support 802.11ac, because it's ridiculous to have wifi problems when the router it's less than 2m or 6ft away...

More replies
Answer Match 42%

Hi All, I am looking at replacing the wifi card in my HP Envy 17-j113tx; its currently got a Intel Wireless-N 7260 (single band) card. I want to upgrade to a decent dual band, preferably AC card. If it doesn't have a whitelist, great... If it does have a whitelist, can anyone please let me know where to find the whitelisted cards, or let me know what they are? Thanks in advance!Jason

A:Does HP Envy 17-j113tx have a wifi card whitelist?

Hi, Jason: As far as we know, that model series does not have a BIOS whitelist, and if you want to install the 7260 dual band-AC card it should also work just fine. If you want to try ordering a model made for HP by searching by the part number on Amazon or eBay, this is the one you need... Intel Dual Band Wireless-AC 7260 802.11 ac 2x2 WiFi + BT 4.0   HP Part # 710661-001 

1 more replies
Answer Match 41.58%

Trying to change my wlan module, but realized that hp whitlists and many cards are not compatible with the bios. Looking at the list of compatible modulels in the manual online there are slim pickings. Is there a newer list that would feature newer cards? Or is there a list that only shows whats compatible with windows 10 seeing as the intel centrino n-1000 I have now is not compatible with windows 10? Either way, I wanted to upgrade, but looking at the list upgrades wouldn't be exciting. Is there a way around the whitelist?Any help would be helpful. thanks in advance.

More replies
Answer Match 41.58%

I'm gonna need it for the eGPU 1.3 setup.
I need to remove the white list
My English is not very good, I'm sorry.
Toshiba A305 Whitelist Removal
-Manufacturer: Toshiba
-Model: A305-S6872
-Model No: PSAG8U-02E018
-Bios Versiyon : Insyde 2.20 (12/07/2009)
-Chipset: Intel GM45 / GM47


Thank you for your support.

More replies
Answer Match 41.58%

VULNERABILITIES

By recommending that users exclude some file extensions and folders from antivirus scans, Microsoft may put users at risk, a security company said today.

In a document published on its support site, Microsoft suggests that users do not scan some files and folders for malware as a way to improve performance in Windows 2000, XP, Vista, Windows 7, Server 2003, Server 2008 and Server 2008 R2. ?

Among the files and folders Microsoft tells users to excludeare those associated with Windows Update and Group Policy, and files with the .edb., .sdb and .chk extensions contained within the "%windir%\security" folder. Trend Micro took exception -- not with the list itself, butwith



Microsoft making it public. ? David Sancho, a malware researcher with Trend Micro?argued that the list
could be a boon to hackers. [Date: 21 December 2009; Source:


Morehttp://www.computerworld.com/s/article/9142571/

A:Microsoft's 'whitelist' helps hackers, says Trend Micro

Awesome. Good job Microsoft!

1 more replies
Answer Match 41.58%

Hey everyone, I am thinking about upgrading my M93p tiny's wireless capabilities (i.e. intel 7260 with wifi ac) and was wondering, if our desktop pc is subject to lenovo whitelisting for wireless hardware. Has anyone tried to achieve this or can any lenovo official answer me, if it will give me the infamous 1802 error.  Thanks in advance! M

More replies
Answer Match 41.58%

Does Avast do a good job at keeping malware, adware etc out of the whitelist that governs hardened mode/aggressive?
In addition to enabling Avast hardened mode/aggressive, I have disabled wscript and cscript.
Does this give me an effective default/deny setup?
 

A:Avast Hardened Mode/Aggressive -- how reliable is whitelist?

shmu26 said:





Does Avast do a good job at keeping malware, adware etc out of the whitelist that governs hardened mode/aggressive?
In addition to enabling Avast hardened mode/aggressive, I have disabled wscript and cscript.
Does this give me an effective default/deny setup?Click to expand...

Do they have any "file intelligence" service?
Search with a hash to see the file whitelisted or not, so we can check our samples that site.

(ex. https://file-intelligence.comodo.com/ )
 

0 more replies
Answer Match 41.58%

Kaspersky Internet Security 2016
Windows 10 x64
I am trying to enable TAM, and it found over 200 unknowns, and it recommends that I not use TAM.
Is there a way to just whitelist them all?
I clicked on the list, but I don't see an option there to whitelist.

EDIT: Most of the unknowns are Windows files connected to Edge and various other Microsoft toys.
 

A:Setting up Kaspersky TAM -- how to whitelist all unknown system files?

I just enabled TAM in mine. Just like yours, mine has 4 unknown OS files.
I think you should click continue. After that, it will give you an option to whitelist the unknowns.
 

0 more replies
Answer Match 41.16%

I am using Comodo free firewall on windows 10
I have HIPS set to Clean PC Mode.
But I still get a few prompts about windows processes.
Why doesn't comodo whitelist all normal windows processes?
Is there something I can do to change this behavior?
 

A:Comodo Clean PC Mode doesn't whitelist windows processes

shmu26 said:





I am using Comodo free firewall on windows 10
I have HIPS set to Clean PC Mode.
But I still get a few prompts about windows processes.
Why doesn't comodo whitelist all normal windows processes?
Is there something I can do to change this behavior?Click to expand...

You will still get firewall prompts for any processes run inside the sandbox using Clean PC Mode.

Are you seeing any HIPS prompts in Clean PC Mode ?

Screenshot(s) ?

If you want to whitelist your entire system, then use Training Mode for at least a week. But just be aware that there is a "disappearing rules" bug - whereby all the rules - including the ones that are part of the default CIS base install - might randomly vanish.

You can also select "Create rules for Trusted applicaions" - which will create generic Allow rules for all Trusted processes. Here again, these created rules might vanish.

Training Mode will create more restrictive rules.
 

3 more replies
Answer Match 40.32%

Everyone,
I am looking to deploy a mass amount of kiosk and decided to create a proxy pointed at 127.0.0.1 and setup a whitelist to limit connectivity to websites. The problem is that everytime I need to modify the whitelist I have to reverse all my safety's and then
reactivate. Is there a way to access another users ie settings from an admin account or does anyone know where ie stores this list to make it easier to modify.

Thanks,

More replies
Answer Match 34.86%

Where can I see what has been added to the whitelist on Barracuda Spam & Virus Firewall 300? It's driving me crazy
 

A:Where is the "whitelist" on Barracuda?

http://helpinghandpc.com/spam-filter.html

have a look there
 

2 more replies