Tech Problem Aggregator

Update Windows 10 Anniversary update-Will not install-error 0xC1900101 - 0x40017 second boot

Q: Update Windows 10 Anniversary update-Will not install-error 0xC1900101 - 0x40017 second boot

We couldn't install Windows 10
0xC1900101 - 0x40017
We've set you PC back to where it was right before you started installing Windows 10
The installation failed in the SECOND_BOOT phase with an error during BOOT operation
What was tried: Connected straight to ethernet, Turned off wireless and Defender A/V, Removing the D/L files, D/L fresh from ISO file, launched install file, went through approx 50% and PC rebooted - nor stuck on black screen with swirling dots for OVER 4 hours with a brief HD access every couple of seconds.
Rebooted again -- still swirling dots on black screen. Tried again, same results.
Rebooted with F8 to get original Win 10 back.
Turned on "metered connection" option for WLAN to stop this update from happening. But now I cannot get and security updates for this machine.
Please suspend this D/L until fixed. Cannot afford to have no protection!

More replies
Answer Match 107.4%

I have a Dell XPS 18 portable all-in-one machine that came with Windows 8, then I updated it to Windows 8.1 without any problems. It caught a nasty virus and I had to restore it to factory settings, which leaves me back at Windows 8.

I have tried multiple times to install the Windows 8.1 update through the Microsoft Store but keep getting Error Code 0xC1900101-0x40017. I have tried the following but get the same result;

Ran all of Windows Updates that would come upVerified that all drivers were up to date. Note: my video driver is NOT a Nvidia but an Intel. I've seen posts stating that this driver needs to be updated in order to fix the problem.Ran Selective Start Up

I don't know what else to do at this point because I have not been able to find anything online related to my problem. Please advise if you have any suggestions. Thanks!

FYI: Antivirus running is Avast!

A:Windows 8.1 Update Error 0xC1900101-0x40017 on Dell XPS 18

Hi, many people with your problem blame Avast for preventing Windows 8.1 installation - "Couldn't update to Windows 8.1 - 0xC1900101 - 0x40017" - Microsoft Community. You can try to uninstall Avast and run the Windows 8.1 upgrade.

Good luck, werty

7 more replies
Answer Match 87.9%

I have a Sony Vaio 32 bit machine 4gb RAM.

It gets stuck at about 80-84% when updating then it says "Couldn't update to Windows 8.1 - 0xC1900101 - 0x40017"

I haven't ever been able to find decent info on the actual microsoft site. I have no devices plugged in, no partitions, etc. Why is this happening! Any work arounds? Would it be better to just burn the ISO and try it that way? But isn't that supposed to be the beauty of the "store" so I don't have to do that?

A:"Couldn't update to Windows 8.1 - 0xC1900101 - 0x40017"

Windows 8.1 upgrade reboots to black screen of 'nothingness'. - OUC1TOO - Site Home - TechNet Blogs

Error 0xC1900101 ? 0x40017 when installing Windows 8.1 - Microsoft Community








Originally Posted by Microsoft Forum Moderator


Error 0xC1900101 – 0x40017 when installing Windows 8.1


Hello,

We understand that many customers are receiving error 0xC1900101 – 0x40017 when installing Windows 8.1. This error is typically caused by an incompatible driver.



If you are receiving this error:
1.
First, please double-check the error code. There are many variations of error 0xC1900101, each with a different location code -- the error extension, located after the dash. The information in this thread is intended only for location code 0x40017. If you are receiving a different location code, these steps are unlikely to resolve your issue.

2.
Check that you’ve already updated all of your drivers. In particular, if you have an NVIDIA GeForce graphics card, make sure you’ve installed the latest Drivers - Download NVIDIA Drivers


3.
Check that you do not have any Frequently Asked Questions - What devices are supported by the SteelSeries Engine? that support the SteelSeries Engine installed on your PC. The SteelSeries Engine software is currently not supported on Windows 8.1. Please uninstall the software before attempting to update to Windows 8.1

7 more replies
Answer Match 87%

I tried installing the Anniversary update using the Media Creation tool and I get this error when I log back in after the setup reverted my installation:

0xC1900101-0x3000D
The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATA operation

Any help would be greatly appreciated!

More replies
Answer Match 86.1%

Windows 10 1511 will not update to 1607 by any method. Updates always complete to 100% then revert. Computer is a Dell Vostro 1720.

Background: The computer never appeared to update automatically, but there was never any error code. I tried to use the Windows 10 upgrade assistant. The upgrade would go through download and install to 100% but then restart back to version 1511 with no error message. Finally, I downloaded the 1607 iso, extracted it to my hard disk, and installed from there. Again the update went to 100% and then reverted back to 1511, but this time it gave the error message 0xC1900101 - 0x20017 "The installation failed in the SAFE_OS phase with an error during BOOT operation."

I have found several threads about this error, and it seems most likely that there is a driver conflict of some kind. I have looked at the setuperr.log from $WINDOWS.~BT/Sources/Panther/ directory but I do not see what is causing the error. Can anyone help with guidance on this?

setuperr.log text:

2016-09-21 19:53:52, Error CONX Windows::Compat::Appraiser::Utilities::SendRequest (1259): Failed to connect to the internet or send request: [12007].[gle=0x80072ee7]
2016-09-21 19:53:52, Error CONX Windows::Compat::Appraiser::Utilities::ResolveForwardLink (1319): Failed to send request using default proxy[gle=0x80072ee7]
2016-09-21 19:54:32, Error CONX Windows::Compat::Appraiser::Utilities::SendRequest (1259): Failed to connect to the internet or send request: [12007].... Read more

More replies
Answer Match 83.4%

Hi, this is my first post so I apologize in advance for any naivete.

Right, so I've been using Windows 10 home without (much) issue for months now, and I decided to do the anniversary upgrade. All is well until it gets to ~75% at which point I blue screen with error






0xC1900101-0x4000D - The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation



This started me off on a long and frustrating journey over the last three days desperately trying everything I could find online to fix the issue, but I'm at the point of giving up, so I figured maybe some kind soul would aid me online.

Thing's I've tried thus far (that I can remember - it's been a lot):
Doing the anniversary upgrade from windows updateDoing the anniversary upgrade via the windows upgrade assistantDoing the anniversary upgrade via ISODoing the anniversary upgrade via ISO from bootable USBReinstalling (not fresh) Windows 10, which yields bsod




0xC1900101-0x2000C - The installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation



Ran chkdsk, which fixed a couple corrupt files, but didn't solve the problemRan sfc, which reported no errorsUpdating every driver I could (using DriverMax to identify out of date drivers, but not to install them)Ran driver verifier with all options but low resources simulation on all non-microsoft drivers, which causes a bsod before it gets to login



... Read more

A:Windows 10 Anniversary Update BSOD 0xC1900101-0x4000D and More!

Ran the DM Log Collector - attached is the result.

more replies
Answer Match 78.6%

I tried to install the Anniversary update using the Media Creation tool and it reverts back and displays this error when I login:
0xC1900101-0x3000D
The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATA operation
Any help would be greatly appreciated!

More replies
Answer Match 100.38%

I am downloading the update manually. Have others had the same issue with windows update not showing the update?

I'm not sure my WU is working because of this.

A:Windows Update does not download and install the anniversary update.

Originally Posted by Alicia J


I am downloading the update manually. Have others had the same issue with windows update not showing the update?

I'm not sure my WU is working because of this.



Have you tried this - https://support.microsoft.com/en-gb/...setting_client

Recommended today by another forum member - may just work

more replies
Answer Match 96.18%

Can anyone help me with this error? I get it every time when trying to get version 1607. I have checked many times; this is not related to any drivers but to something I do not understand. Here are included my Panther and Rollback folders.
Sources.zip - Google Drive

More replies
Answer Match 94.5%

I've downloaded the update for my laptop through windows update 3 times now. Each time it completes download, then restarts, configures updates, then gives me the notification: "We couldn't finish installing updates" Following that, a check of my update history shows no failed attempt or any reference to the update being downloaded. There is not at any stage an error code.
I have run the Windows Update Trouble Shooter with no result.
Any ideas will be welcome.

(I have a monthly isp download limit of 10 gb and with the speed i get it takes 4 hours to download the update so it has to be done after midnight so it doesn't count against the download limit )

A:Anniversary update won't install - no error code

Hi, download the ISO manually and create a bootable medium (which is useful in various circumstances).
(How - where- see the Tutorial section or search the net- not difficult).

That way you download once and can retry and have it available for other purposes. Also you avoid issues with Windows update.

From an admin command prompt
[Windows key + X, click command prompt (admin)]
chkdsk C: /F
Your PC will need to restart.
Make sure the result is clear or fixed.
Post back the result, which you can get after a restart as follows:
How do I see the results of a CHKDSK that ran on boot? - Ask Leo!

Disable any AV. Disconnect any devices you don't need. Uninstall any program that affects or modifies your GUI.

Do a clean boot then try the upgrade using the Win 10 DVD/USB.

If it fails again, you can have a look at the log:
Windows Update logs are now generated using ETW (Event Tracing for Windows).
Please run the Get-WindowsUpdateLog PowerShell command to convert ETW traces into a readable WindowsUpdate.log.

For more information, please visit http://go.microsoft.com/fwlink/?LinkId=518345

Good luck!

1 more replies
Answer Match 94.08%

Error with windows update, trying to install the November update of windows 10

0xC1900101-0x40017
The Installation failed in the SECOND_BOOT phase with an error during BOOT operation.

I have done the DISM stuff the SFC stuff and even did a full CLEAN install of windows 10 losing all my programs and that's how i got the error i listed above. I downloaded the patch using the Windows Media tool as the windows update wont seem to download it and say it will try again later. It always seems to fail on one of the restarts.

Any Idea how to get the November update installed? Oh and now some of my programs are saying im missing MSVCP100.dll and trying to go to the download page at Microsoft just says try again later.

More replies
Answer Match 93.66%

Hello all.
Running windows 10 pro 64 bit.
I've updated from Version 1511 to the anniversary update, 1607.
Or at least, I thought I did.
The update went well, no hiccups, no errors. Used windows update, let it downloaded and install and rebooted. Alas, system still shows OS Version 1511.
Used update again, same thing, rebooted, 1511.
Went to the windows site, downloaded the windows10upgrade9252.exe, ran it, same exact issue, rebooted, still showing version 1511.
Error logs show no issues. Disabled all external drives, turned off anti-virus, etc, repeated, rinsed, rebooted, still version 1511.
Only think I've not done is burned an ISO to DVD and updated from that.
Any clues as to what's going on?
Thanks!
Nelson Davis

A:windows 10 update from version 1511 to 1607 anniversary update - does not update

Can you check to see what OS version you have? Check in settings > system > OS build. It should show something like 14393.5 or 14393.10

5 more replies
Answer Match 93.66%

After the second boot on the updating screen, the one with the spinning thing. When it gets to 83%, my screen just freezes out of nowhere. I tried switching off and back on again but it reverts back to my previous version of Win10. I tried getting Microsoft Support to help but their service wasn't all that great and I wasn't too happy with them. So I'm calling on you guys to help me out.

A:Tried to install Anniversary Update but it fails by error 0xC1990. Please help me?

Welcome!
Please consider joining us here at Windows Central as a valued member.
Here's a recent WC article that may help you: Windows 10 Anniversary Update common problems and how to fix them | Windows Central

1 more replies
Answer Match 91.56%

When trying to do the update I am told that my version is 10586 and that I need to be at 14393. I tell it to go ahead and do the update and it gets to 2% and then it tells me something went wrong and gives me error code 0x80070005.

A:Windows 10 anniversary update won't install

I know this is odd, but I saw this on another site and it has worked for me on 2 computers so far. Click on the anniversary update, let it check your system and then let it download the update. As soon as it starts to update, disconnect the wireless or LAN. It was able to update after this. Once it got past this section, I connected to the wireless again. About to do this with my 3rd computer. None were able to update before.

2 more replies
Answer Match 91.56%

program installs but system won't reboot

More replies
Answer Match 91.56%

Product Name: HP Envy 15-j122txPre-installed OS: Windows 8.1 New clean OS installation : Windows 10 pro  I have bought Samsung 850 pro 1 TB SSd  for my hp envy notebook.I am going to replace an old 1TB HHD by a new 1TB SSD Samsung 850 EVO on my HP Envy Touchsmart 15 j122TX. how to installing the SSD on my HP plus clean installation of Windows 10 pro, setting up the OS to ensure a smooth performance? Please give me step by step instructions as I am un-experienced. Thank you for your support.  MY notebook has 24 msata SSD install can I use msata with my new SSD after the clean installation of Windows 10 pro?    

A:install windows 10 anniversary update on SSD

Here is the Service Manual: Manual Pages 41-47 show removal of the service bay door and replacement of the hard drive. Just install the SSD in place of the hard drive. You can remove the mSSD drive. It is not useful with a main SSD drive. It was designed only to speed up a regular mechanical drive.  Do you have a Windows 10 installation disk? You can download an image file and create a Windows 10 DVD or thumb drive installation media from the Media Creation Tool Microsoft webpage.  Post back so I can see if you are with us here. We can take this a bit at a time rather than my writing War and Peace and you not understanding something. 

1 more replies
Answer Match 91.56%

Hello all,

Need some help... I had Windows 7 Ultimate on my pc then, I got the free copy of Windows 10 per Microsoft.
My system now is Windows 10 Pro version 1511 OS build (10586.633)
The anniversary update fails every time..... things that I have tried:
completely pause (stop) Norton Anti-virus
completely pause (stop) Malwarebytes
Clean boot

I build this pc about 5 yrs ago, never had a problem; here are the specs:

Intel i7 CPU 930 @ 3.0 ghz
12gb DDR3
Windows 64 bit
256 gb SSD drive for OS
2 tb drive for data

Any help will be appreciated;

Thanks

More replies
Answer Match 90.72%

I have an xps 8700 desktop.
Will windows find most of the drivers?
If I enter my service tag and go to drivers will all the drivers that I need be there?
(I had an old Dell with Windows XP. I did a clean install on it once. I think there was one device that was listed as unknown. I put in the dell driver disk and it install most of the missing drivers I needed, as I recall. But you no longer get disks with Dell computers.)
Is there a place to download a drivers disk?
If I open Macrium Reflex, it shows that there are 5 partitions. One is the c: drive, one is PBR Image, one is wintools (I think). What are the other 2? They must be Dell partitions as I never created any partitions.
I looked up the model number of my harddrive and it appears to be a standard hard drive. Somebody said that there could be a small SSD that is used to help the other drive boot faster. If there was such a drive, wouldn't I see if I opened Optimizer? Or in Macrium Reflect?
The model number of my harddrive is WD10EZEX

A:If I have to do a clean install to Windows 10 Anniversary update...

Macrium just finished the backup, so I just checked and there are 7 partions
1. ESP
2.DIAGS
3. None - unformatted 128/128 (must be a windows thing as my second drive that I added has this too)
4. Winretools
5. OS (C)
6. None- primary 334.2/450
7. PBR Image

3 more replies
Answer Match 90.72%

First of all, I'm coming from Windows 7. I'm one that was able to upgrade to Windows 10 for free.

Am I able to perform a clean install of Windows 10 using the same license I currently have on Windows 10? How would I obtain my current key, then? Is it s imply the Product ID listed under Control Panel>System ?

Can I download a copy of the installation media which already contains the AU update?

How would I install Windows 10 onto a M.2 drive? Is it as easy as picking the hard drive to install Windows on during setup?

A:How do I clean install Windows 10 Anniversary Update?

You could just use "reset my pc".

Alternatively, create bootable usb stick or dvd

Windows 10

Boot from it, choose custom install, delete all partitions on drive you want to use (backup data first of course), and skip key entry as not needed as you have already upgraded.

1 more replies
Answer Match 90.72%

I've having trouble installing the Windows 10 Anniversary Update.

The installation of the update seems to get to about 70% complete, then I get a BSOD saying "kernel security check failure".

Then the update system automatically rolls back my Windows installation to the pre-Anniversary Update version.

Not sure which driver is causing the problem. Hopefully, the attached logs will help to narrow down the problem.

Thanks for any help.

More replies
Answer Match 90.72%

JOHN_COMPUTER-07_08_2016_191929_84.zipI'm having trouble installing the Windows 10 Anniversary Update.

The installation of the update seems to get to about 75% complete, then I get a BSOD.

Then the update system automatically rolls back my Windows installation to the pre-Anniversary Update version.

Not sure what is causing the problem.

Using dm_log_collector produces an empty zip file which is attached.

Thanks for any help.

If any other files needed please state and will attach.

More replies
Answer Match 90.3%

Hey,

I've tried to install the Win 8.1 Update via the Windows Store and got the 0xc1900101 - 0x30018 several times after the PC restarted at the ending of the update.

I know that several users solved this with disabling drivers, so I did some suggestions I've found.

1. Disabling AV (Kaspersky)

2. Disabling LAN Controllers

3. Uninstalling DAEMON Tools, TuneUp

4.

--> DISM.exe /Online /Cleanup-image /Restorehealth

--> sfc /scannow  

--> wsreset.exe

5. Trying to repair Windows Update itself via "WindowsUpdateDiagnostic.diagcab"

6. Disabling AIDA

7. Disabling all components from my ASUS motherboard

some other things I can't remember...

For your information, I don't want to install Windows 8.1 from scratch, as I have too many programs and I never had problems with installing an OS for this system (Win7, Win8).

Thanks for the help

UpdateLog:
2013-10-17 21:31:41:150 5840 25f4 Handler Deleting setup file '9600.16415.winblue_refresh.130928-2229_x64fre_client_Professionalwmc_gdr_de-de-IR1_CPWMCA_X64FRER_DE-DE_ESD.esd'
2013-10-17 21:31:41:150 5840 25f4 Handler : Installer completed. Process return code = 0x00000000, result = 0x00000000, callback pending = true
2013-10-17 21:31:41:157 5840 25f4 Handler :::::::::
2013-10-17 21:31:41:157 5840 25f4 Handler :: END :: Handler: Windows Setup Install
2013-10-17 21:31:41:157 5840 25f4 Handler :::::::::::::
2013-10-17 21:31:41:162 1064 3218 AU Preventing expiration of po... Read more

A:0xc1900101 - 0x30018 Error during update -> restore Win8

I fixed it with these things:

1. Uninstalling DAEMON Tools, TuneUp
2. via CMD (as admin) -> DISM.exe /Online /Cleanup-image /Restorehealth
3. Disabling Intel LAN, Azalia Audio, USB 3.0 via BIOS

19 more replies
Answer Match 89.88%

Windows 10 Anniversary Update Might Hide Partitions After Install

One of the issues experienced by users after installing the Windows 10 Anniversary Update concerns partitions, as many of those who upgraded their computers reported that a number of partitions disappeared from File Explorer.

Furthermore, all partitions show up as RAW in Disk Management, which makes most people believe that all their data has been removed and nothing can be recovered.

Microsoft, however, claims that this is just a bug discovered in the Windows 10 Anniversary Update install system, and while no files are lost, it?s critical for users not to try to recover anything with third-party apps because this could lead to completely breaking down the partitions and removal of data.

?Microsoft is aware of this issue and is working on a solution to be released through Windows Update. Any data you have stored on the affected partition is still there. We recommend that you not try to recover or otherwise write data to the affected partition, nor should you format the partition,? the company says.




You can also downgrade in the meantime
Microsoft?s Sharath Srinivasa goes on to explain that a patch will be released to users when it?s available and states that users who do not want to wait for it can always downgrade to their previous Windows version. Partitions should be then just as you created them, with all files once again accessible.

For the moments, there?s still no timing on wh... Read more

More replies
Answer Match 89.88%

I have a problem after installing the Anniversary Update of Windows 10. This post concerns the process which involves a clean re-install of Windows 10 by the method which includes downloading and running Microsoft's Media Creation Tool, choosing "Create Media for another PC". This downloads an ISO of Windows which, when put on a USB stick, can be used to boot the computer and clean-install Windows 10 (no license key required because Windows 10 was already running, although I have my license key.) I am told that this produces a "very clean" install which would clear any glitches in the previous install. Programs would need to be re-installed.

My question please: assuming that the Media Creation Tool will be downloaded after the Anniversary Update was installed, will it produce a Windows 10 + Anniversary Update version ?

Thanks for any help.

PS: I wasn't able to create a Macrium System Image which would include the Anniversary Upgrade because my problem occurred immediately after the Update. If you are interested in what that problem is, go to:

http://www.tenforums.com/installation-setup/58571-anniversary-update-search-not-working-properly.html

A:Clean Install of Windows 10 including Anniversary Update

I used the MCT tool this morning and i can assure you its the 14393 build. You will find some windows updates waiting at the end of it.

1 more replies
Answer Match 89.88%

I have windows 10 installed on Lumia 1020 with no problems very happy with it just wanted to know if anniversary update could be installed thank you.

A:can windows 10 anniversary update install on lumia 1020

Originally Posted by Windows Central Question I have windows 10 installed on Lumia 1020 with no problems very happy with it just wanted to know if anniversary update could be installed thank you. It can: [Guide] Installing Redstone on Unsupported devices (X2X Series)
Your phone already got Windows 10 last Threshold, so it could do that in the shortest way (see forum: )
" Windows 10 Mobile 1) Any Nokia Lumia X2X Series (with and without SD card) running the below OS versions 10586.10710586.545
Users who're on these versions can get Redstone in a much simpler way. You can stop here. 2) Files needed a) InteropTools v 1.8 - Here b) DHTUpgrade Advisor - Here 3) Go to developer options and enable developer mode. After that, a) Copy the appx files from "Dependencies" and "InteropTools_Beta_1.8_0.0.160.0_arm.appxbundle" to your phone and install them. b) Now open InteropTools (beta) >> goto "INTEROP UNLOCK" section >> toggle on the Restore NDTKSvc. 4) Now similarly install the files from "DHTUpgrade Advisor" and "Dependecies" via file explorer. a) After installing, Open DHTUpgrade Advisor, select backup and then choose "Allow Update 512MB devices" or "Allow Update" b) Crosscheck if your device info details are changed or not in the "About" tab. If not, reboot your phone. 4) Go to windows update and check for updates. a) If the update isn't offered, then install &q... Read more

2 more replies
Answer Match 89.46%

Hello out there,

since seven days i try to update my system to WIN8.1. from the first try i get the errorcod 0xc1900101 - 0x30018.
I have already made a reinstallation of WIN8 and deinstalled everything exept the networkdriver. Allways get the same message. The installation seems to work fine till deviceconfiguration 64%. Then it restarts and sets back to WIN8.
My system is Satellite Pro C870 -1EJ
Need some help, or better an solution.

THX

verzweiflix

A:Satellite Pro C870 - Win8.1 update - Error 0xC1900101 - 0x30018

Just solved it myself,

and for anyone else with the same Problem.
It has been the Catalyst suite. Just deinstalled it and voila
It now works.

14 more replies
Answer Match 89.04%

Search Results

I am trying to update from Windows 10 OS Build 10586.589 to the Anniversary Update but my computer freezes at 1% progress. I have tried everything I can think of including: Unplugging all extra SATA drives except my main SSD, unplugging my wireless network adapter, unplugging all USB devices (even mouse and keyboard), removing old drivers and updating outdated ones, and installing the update through a USB flash drive. It always gets to the same part and freezes until I shutdown my computer and lose no data.

You can see pictures of the frozen screen here: http://imgur.com/a/PseoH.
Reddit thread (Took the guys advice on there): Windows 10 Anniversary Update Freeze : Windows10
Hopefully someone can give me some guidance on how to fix this as I've tried everything I can think of. Thanks!

Motherboard: Asus M5A97 R2.0
CPU: AMD FX-8320 (OC)
GPU: EVGA GTX 750 SC OS
SSD: Samsung 840 EVO 120 GB SSD

More replies
Answer Match 88.62%

Hi,
I have a Packard Bell OneTwo S3221. It came factory installed with W7.

I upgraded to W10 last year after difficulty - upgrading to W10 via Windows update would not work, kept installing to a certain percentage then would reboot to a blank screen and freeze indefinitely, I needed to power off then on restart it would roll back to W7. This happened repeatedly despite trying all sorts - clean boots, uninstalling antivirus and updating drivers, etc.

I finally installed W10 using Media creation tool. Everything ran fine. But when the big update came in Novmember 2015 that failed to, in the same way as above, however all other monthly windows updates install fine.

Windows update never tried to push the Nov 2015 update on me again - I'm still on build 10240 now.

I was prompted to install the anniversary update by Windows update last week but that also failed in the same way as above. Download ok and begins installing fine, then at some point after 50% complete I get the blank screen indefinitely and have to power off, then it reverts back to W10 build 10240.

Having checked Packard Bell website my model is not supported by Packard Bell for W10, and they are not providing any drivers for it. This may explain the problems.

Can anyone suggest how to find out what the problem is and if there is a solution? I've tried looking in Update history for error codes, but there is none, it doesn't even show an attempt to install the anniversary update. Like i said every other ... Read more

A:Can't install Windows 10 Anniversary update, stuck on build 10240

Hi, simplest answer is avoid windows update and create the appropriate bootable medium or iso and use it as you did before.
As you know plenty of people have this sort of problem.

Note that the upgrade can introduce new issues for some (search the net), and some are delaying because of that. Older machines like yours could well exhibit such problems. So before you make this change, I recommend you create a disk image of your existing setup - a procedure you should do routinely anyway- to give another way of restoring your system.
E.g. Macrium Reflect (free) + its boot medium + external storage for images.

It's best to have a physical bootable medium as it covers all of:
a. if you need to repeat the installation
b. as a bootable medium for recovery options
c. in case you need to do an in-place upgrade repair install

without taking up disk space.

0 more replies
Answer Match 88.62%

Hello,I recently purchased a new 2016 model Spectre x360 (PN X7V20UA). It came running Windows 10 1511, and I would like it to be running 1607 (Anniversary Update). However, the update to 1607 is not being offered inside of Windows Update. I've installed everything that was available, include today's November patch releases, to no avail. Windows Update shows "Your device is up to date." This link http://arstechnica.com/gadgets/2016/10/hps-new-spectre-x360-is-probably-the-best-pc-laptop-around/ says that the 1607 update is being blocked on this model temporarily due to driver compatability issues. I tried to get confirmation from HP twitter support about if this was true or not, but wasn't able to get much help. Can someone please confim this?

More replies
Answer Match 88.62%

I have tried multiple times times to install the Windows 10 Pro, Anniversary Update to my desktop computer, a Dell Inspiron 560. Every time, the result has been a computer that will not start-up, ie. Windows does not appear to load/run. I have tried the WURepair tool and tried to repair the System Registry HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Windows NT>ProfileList, all to no avail. I have had to restore my system with an previous Image to get it operational again. Has anybody else had this problem and been able to come up with an answer?

A:Trouble trying to install Windows 10 Anniversary Update, version 1607

Hello JRAllen72653 Welcome to the Ten Forums!

One advice I can provide here would be to try a different method for either update by upgrade or planned clean install which doesn't seem to be what you have been looking for. When the Redstone 1 update didn't even arrive here for 3 separate desktops as well as a recently new laptop where 10 came already on not seeing the update still lead to fail of the MC Tool to see the immediate online upgrade take place or create the usb media needed.

Twin solutions were then sought! The first in order to see all machines updated was to download the "windows.iso" by way of the MC Tool which equals both the 32bit and 64bit flavors for both the Home and Pro editions. We call that a "4 in 1" type of download that covers everyone.

The second item on the agenda did opt to use a 3rd party program not the Windows option to mount the iso downloaded onto each machine or run from a flash drive where the setup.exe main executable would be manually started to watch each upgrade install take place. Once all systems were set which included one desktop only lately being upgraded from 7 Home Premium to 10 Home and then still waiting for the update to go on before return to owner was to visit a MS download iso type page to grab both the 32bit and 64bit smaller Dual Edition iso downloads to keep onhand.

For a final fix to all older already made up flash drives for the Threshold 2 update last November as well as for Windows Insider P... Read more

3 more replies
Answer Match 88.62%

I just installed the Windows 10 anniversary upgrade.Wneh I tried to Scan a document, selected document scan, it tried  for a while and came up with the following error: Request to capture Moment failed with new HPPC_RESULT value as [1.829.88a.0] (GET_FRAME_TIME_OUT) I installed the Sprout Workstation update to no avail, I still get this error, cannot scan documents.Any idea Guys??? Thanks,

More replies
Answer Match 86.94%

I've wanted to download an app called Clamour, but I need a newer version of Windows Phone 10. I am part of the insider preview, and have searched for updates, however, I have no updates waiting yet. I thought the update rolled out to the Lumia 950. Has it not yet or am I missing something?

More replies
Answer Match 86.94%

Since I updated my Dell Inspiron to the Windows 10 Anniversary edition I've come up with two problems.

The first was that it the laptop would automatically restart if Shut Down was selected with no possibility of really shutting down. This was solved by turning off the Fast Startup in power options. Now it takes too much time considering I'm using a SSDThe second one is still unresolved and it is that the laptop freezes every time I turn it on at the Dell logo and the only way of making it boot is by closing and opening the lid again. After that it boots normaly. 

I've tried different power options with no success. Power troubleshooter doesn't detect anything. It also happens with no usb devices attached.
I don't know if it is sofware or hardware related

Any ideas?UPDATE1: I've formatted and installed windows again and the problem persists... so It's definetly hardware or BIOS

A:Inspiron 5559 won't boot unless I close and open lid after Windows 10 Anniversary Update

small_eee,When you installed Windows 10 did you install the Windows 10 Drivers for the computer? If not, click the link below to download. If the drivers were loaded you may want to run the diagnostics on the computer to check the hardware. Below is information to run the diagnostics.Unplug all devices from the computer.The Dell Inspiron 5559 is shipped with the Dell™ Enhanced Pre-boot System Assessment (ePSA) diagnostics. ePSA has been significantly improved with a view to streamline the entire diagnostic process. Enhancements include simultaneous testing on multiple devices, automatic execution that can be interrupted to allow interactive test selection, and an intuitive graphical user interface (GUI).Launching the Dell ePSA DiagnosticsDuring the boot process, ePSA is accessed from a cold boot by pressing the power button on and repeatedly tapping <F12> until the BIOS Boot Menu appears on the screen. Use the Up and Down Arrow keys to select Diagnostics on the menu, and then press <Enter>.Testing Devices using ePSAePSA begins by checking an area in the system memory to ensure it is safe, and then loads itself into the verified memory area. Then, ePSA automatically begins high-level algorithms on all system memory to ensure integrity.ePSA starts running the quick test without waiting for user input. To select a specific device to test, users can tap the Esc key to abort testing. Then click on the right-arrow on the bottom right of the screen. A NOTE indicate... Read more

3 more replies
Answer Match 86.94%

Hello,

My DU meter stopped reporting and collecting data after the 10 Anniversary Update. As you can see from the first screen shot my taskbar used to display the upload/download speeds but now it's just black

I tried reinstalling DU meter but no luck.

Win10 Anniversary update x64
Intel Graphics
4 GB Ram

A:Windows 10 Anniversary Update and DU meter Reporting Error

Hi, installed v7.15 on my 64 bit anniversary upgrade Win 10 Pro.. DU meter works, which suggests no intrinsic incompatibility. Which version have you got installed?

3 more replies
Answer Match 86.94%

Hi all,
I cannot update to Windows 10 anniversary update. I get the 0x8007001f error code.
Here is the log from C:\$WINDOWS.~BT\Sources\Panther\setuperr.log


Code:
2016-09-08 17:28:05, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Suspend(1066): Result = 0xC1800104
2016-09-08 17:28:05, Error MOUPG CSetupManager::ExecuteInstallMode(735): Result = 0x800705BB
2016-09-08 17:28:05, Error MOUPG CSetupManager::ExecuteDownlevelMode(391): Result = 0x800705BB
2016-09-08 17:28:06, Error MOUPG CSetupManager::Execute(236): Result = 0x800705BB
2016-09-08 17:28:06, Error MOUPG CSetupHost::Execute(372): Result = 0x800705BB
2016-09-08 17:38:30, Error CONX Failed hashing for \??\c:\program files (x86)\norton internet security\nortondata\22.7.0.76\definitions\sdsdefs\20160630.020\eng64.sys, 0x80070003

2016-09-08 17:38:30, Error CONX Failed hashing for [\??\c:\program files (x86)\norton internet security\nortondata\22.7.0.76\definitions\sdsdefs\20160630.020\eng64.sys] 0x80070003

2016-09-08 17:38:30, Error CONX Failed hashing for \??\c:\program files (x86)\norton internet security\nortondata\22.7.0.76\definitions\sdsdefs\20160630.020\ex64.sys, 0x80070003

2016-09-08 17:38:30, Error CONX Failed hashing for [\??\c:\program files (x8... Read more

More replies
Answer Match 86.94%

I have HP ENVY x360 - 15-u483cl which worked perfectly for 7 months, till i got a windows 10 anniversary update. It caused my computer to give BSOD with "system service exception igdkmd64.sys" error after every 2 days. I have latest version of the driver (Intel High-Definition Graphics Driver, 20.19.15.4360 Rev.B). I tried every possible solution available on internet to solve the problem but in vain. Finally i had to disable the intel driver and put the notebook on Microsoft?s generic driver which ended the BSOD. Now i have to live with poor graphics. Probably the only solution is if HP launches a newer version of driver that doesn?t conflict with windows 10 anniversary update. Or is there any other solution?

More replies
Answer Match 86.52%

Hey all,

So I am currently reinstalling Windows on my dad's old laptop after the hard drive decided up die on us, and I stumbled on a problem that's a bit too hard for me to fix.

Namely, I am completely unable to install any Windows Update. Not even MSE will install.

I tried running SURT, but got error code 0x8000247
I also tried running SFC /SCANNOW, it ran the verification fase until 98% and then stated that there where unfixable problems.

The displayed error codes are:
In WU: "8024A000"
In SURT: "0x8000247"
Whilst installing MSE: "0x80070643".

Attached you will find CBS.log and MSINFO with my system specs.
Cheers and many thanks in advance,
Nommy

CBS.log MSINFO32.nfo

A:Windows Update error code 8024A000; unable to install any update.

That's very reminiscent of similar errors in Win7 - and I wouldn't be surprised to see it being non-genuine.
Please post an MGADiag report BEFORE doing the below potential fixes.

This may simply be caused by a bad set of Intel Storage Matrix Technology drivers -

Installing the Intel Drivers
try downloading and installing them from here -
https://downloadcenter.intel.com/Det...&DwnldID=17882

(IATA89ENU.exe)

Once complete, please reboot twice, then post another MGADiag report.


If nothing has changed, try this...

Please run the following commands in an Elevated Command Prompt

NET STOP CRYPTSVC
REN C:\WINDOWS\SYSTEM32\CATROOT2 CATROOT2OLD
NET START CRYPTSVC

once complete, leave the system alone for at least an hour to rebuild the database, then reboot, and run another MGADiag report and post the results.

If neither of them work, we'll re-evaluate.

9 more replies
Answer Match 86.1%

windows 10 after update to  anniversary update I have cycle reboot (only dell logo)
I think it's problem with driver INTEL RAPID ON (Intel Rapid Storage)
I'm have lates update driver and bios

More replies
Answer Match 86.1%

I've tried to do with Windows 10 Anniversary update on my Inspiron 2350, but each time I try, it tells me it can't proceed because of a video error.  I've gone to the 2350 page and I've done all the driver updates there were to install but that didn't fix the problem.  Does anyone have any idea what the problem is? 

More replies
Answer Match 83.16%

The Win 10 AU fails to install with error:0x80070002-0x20009.I have a cloned SSD and use the old HDD for data as Drive D:I've tried the standard update and also the MediaCreationTool.exe, I have also triedto install with the HDD disabled. Any help ?




P50 20ENCTO1WW | 6700HQ | 32 GB RAM |M1000M |512 SSD

More replies
Answer Match 83.16%

I tried to update using the usual method, as the new update was present. I tried twice, and it failed twice. 2nd time it became clear that the Razer Synapse software (recent purchase of a discount keyboard) was causing the issue. So, I've uninstalled that. Fine, so now I go to hit the update button again, but Windows tells me it's up to date? I know for a fact it isn't, because it just told me it could not install the update and reverted to the previous version. What gives?
So, I can see it has downloaded the update to the '$WINDOWS.~BT' folder, but it will not trigger by running the 'setup.exe' file. My question is, how do I proceed now? How do I trigger the update I've downloaded to install, when Windows seems to have decided it's already installed it?
Ruddy Windows 10...

A:Anniversary Update Install - Help!

Originally Posted by AndyCalling I tried to update using the usual method, as the new update was present. I tried twice, and it failed twice. 2nd time it became clear that the Razer Synapse software (recent purchase of a discount keyboard) was causing the issue. So, I've uninstalled that. Fine, so now I go to hit the update button again, but Windows tells me it's up to date? I know for a fact it isn't, because it just told me it could not install the update and reverted to the previous version. What gives?
So, I can see it has downloaded the update to the '$WINDOWS.~BT' folder, but it will not trigger by running the 'setup.exe' file. My question is, how do I proceed now? How do I trigger the update I've downloaded to install, when Windows seems to have decided it's already installed it?
Ruddy Windows 10... try this tool: https://support.microsoft.com/en-us/...troubleshooter

1 more replies
Answer Match 82.74%

I have spent several hours trying to get my HP Envy upgraded from Windows 8.1 to Windows 10. I have updated all my drivers, removed all USB items, tried disabling my wifi, and tried installing via USB - all to no avail. Can someone please help me!

More replies
Answer Match 82.32%

GDRDU: Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3176938)
Failed to install.
Installation went up to 95% and then stuck on that for some time and then the computer restarted and said reverting to previous version.

More replies
Answer Match 82.32%

how to install FM radio after Anniversary update is installed ?

More replies
Answer Match 81.48%

I had no problems with Windows 10 start times but since the Anniversary update, boot time is just under 3 minutes. Any ideas to what to look into for the cause?

A:Very slow boot after Anniversary update

Yep....same thing happened to me. I have a pretty stout custom build. I ended up doing a clean install. I downloaded the media creation tool, used the USB method....my system is way better now.

Windows 10

5 more replies
Answer Match 81.48%

I had no problems with Windows 10 start times but since the Anniversary update, boot time is just under 3 minutes. Any ideas to what to look into for the cause?

A:Very slow boot after Anniversary update

Yep....same thing happened to me. I have a pretty stout custom build. I ended up doing a clean install. I downloaded the media creation tool, used the USB method....my system is way better now.

Windows 10

1 more replies
Answer Match 81.48%

Trying to install the KB3185614 (anniversary 1607) update, but getting the 'couldn't complete the updates undoing changes' messages after 100%.  System log shows a 0x8024200D error code. Tried.... 1. uninstalling all anti-virus apps, inc luding cleanup tools afterwards.2. deleting the SoftwareDistribution folder contents.3. downloading the update manually from the MS catalog site and installing from that4. doing an upgrade install using the latest 1607 iso on a dvd from within Windows Anyhting else I could try before I go for the last resort of a clean install using said dvd?. thanksjoe

More replies
Answer Match 81.48%

My first impressions:

Pros:
Seems a bit faster overall - I did a complete system image backup in 00:02:09 (previously took 00:02:35)
OS install uses less space (at least for my installation)
Event viewer shows no new instances (I had two known issues before and they are still there)
Reapplied many of Brinks tutorial suggestions and most of them worked... except this one:

gpedit management notice is missing (second screen shot) so I can't say for sure if it will work (or not).

Cons:
Win10BGChanger1.2.1 still doesn't work (as expected)
Sound removed from notifications by default (not a con for me though)
Installed default audio playback to my headset - changed to speakers
All in all, working well so far (for me).

A:Anniversary Update - Clean Install - First Impressions

I like everything except the removal of being able to skip the lock screen on wake from resume

more replies
Answer Match 81.48%

My first impressions:

Pros:
Seems a bit faster overall - I did a complete system image backup in 00:02:09 (previously took 00:02:35)
OS install uses less space (at least for my installation)
Event viewer shows no new instances (I had two known issues before and they are still there)
Reapplied many of Brinks tutorial suggestions and most of them worked... except this one:

gpedit management notice is missing (second screen shot) so I can't say for sure if it will work (or not).

Cons:
Win10BGChanger1.2.1 still doesn't work (as expected)
Sound removed from notifications by default (not a con for me though)

All in all, working well so far (for me).

More replies
Answer Match 81.48%

I am unable to install the Windows 10 Anniversary Update, keeps failing after second restart (at around 75%).

Machine is a relatively recent custom build, a little over 12 months old: Gigabyte B85M-HD3 (rev 2) mobo, i5-4460 CPU, Geforce GT 740 2GB GPU, 8GB RAM, Samsung 850 EVO 250GB SSD. Been running Windows 10 Pro 64-bit (1511) with no problems. sfc /scannow gives a clean bill of health. No apparent issues with drivers, Device Manager shows all good.

Tried installing via Windows Update and also via the downloaded Windows 10 Upgrade executable... same result. Everything goes well up until the second restart and then the start screen just hangs with the little circle of dots twiddling around indefinitely - up to 8 hours - and no hard drive activity whatsoever.

The only USB devices connected are my keyboard and mouse. I've tried installing in Clean Boot mode with all startup items and non-Microsoft services disabled... no difference. Tried increasing the size of the System Reserved partition from 350MB to 500MB... no difference. Tried installing while disconnected from the internet... no difference.

Downloaded the Windows 10 1607 ISO (which includes the Anniversary Update) and tried an upgrade install in Clean Boot mode, both with and without internet connection - installation froze at exactly the same place, after the second restart. Received the following error message upon recovering to previous version:


No idea where to go from here. Clean install is definitely... Read more

More replies
Answer Match 81.48%

Running Windows 10 1511 on a 500gb SSD - all works 100% Have installed 1607 twice now works OK and seems Ok for a few hours and then I find all sorts of problem occouring - programs will not run, even Ctrl/Alt/Delete does not work and so on and I end up going back to 1511 wg#hich I have kept a copy of.
At present I have decided to abandon 1607 and continue with1511 - will this still be supported with security updates?
Martin

More replies
Answer Match 81.06%

This x64 system was upgraded from Windows 7 Ultimate in August 2015. All the patches and updates have been applied successfully. I have eliminated all but one error. I have been working on this for days. I would appreciate any help resolving this error:

2016-08-24 15:35:51, Error MOUPG CInstallUI::GetDefaultLanguage(1715): Result = 0x80070002[gle=0x00000002]
2016-08-24 15:43:43, Error MOUPG CSetupManager::GetDUSetupResults(5249): Result = 0x80070490

More replies
Answer Match 80.64%

Windows 10 (Anniversary Update) will not get past the splash screen with a Asus AMD Radeon R9 290 fitted.
I spent 3 days trying to install the Anniversary Update so that I can play Forza Horizon 3 as it will not even install without it. In the end I took all the cards out of my system and disconnected all peripherals and used the on-board intel graphics. I did a fresh installation of Windows 10 Anniversary and it finally installed okay. I added the hardware back 1 by 1 and in the end Windows gets stuck at the splash screen when I have the Radeon R9 installed. I installed the drivers but it still just gets stuck at the splash screen, with no revolving circle, and will not boot with the Radeon R9 installed. When I take out the Radeon and use the on-board intel card it will boot ok.
I can boot from my other SSD which is pre Anniversary Update and everything works fine with the Radeon R9 installed.
I have no idea what to do next. Any help is appreciated.

More replies
Answer Match 80.64%

Windows 10 (Anniversary Update) will not get past the splash screen with a Asus AMD Radeon R9 290 fitted.

I spent 3 days trying to install the Anniversary Update so that I can play Forza Horizon 3 as it will not even install without it. In the end I took all the cards out of my system and disconnected all peripherals and used the on-board intel graphics. I did a fresh installation of Windows 10 Anniversary and it finally installed okay. I added the hardware back 1 by 1 and in the end Windows gets stuck at the splash screen when I have the Radeon R9 installed. I installed the drivers but it still just gets stuck at the splash screen, with no revolving circle, and will not boot with the Radeon R9 installed. When I take out the Radeon and use the on-board intel card it will boot ok.

I can boot from my other SSD which is pre Anniversary Update and everything works fine with the Radeon R9 installed.
I have no idea what to do next. Any help is appreciated.

More replies
Answer Match 80.64%

Windows 10 (Anniversary Update) will not get past the splash screen with a Asus AMD Radeon R9 290 fitted.

I spent 3 days trying to install the Anniversary Update so that I can play Forza Horizon 3 as it will not even install without it. In the end I took all the cards out of my system and disconnected all peripherals and used the on-board intel graphics. I did a fresh installation of Windows 10 Anniversary and it finally installed okay. I added the hardware back 1 by 1 and in the end Windows gets stuck at the splash screen when I have the Radeon R9 installed. I installed the drivers but it still just gets stuck at the splash screen, with no revolving circle, and will not boot with the Radeon R9 installed. When I take out the Radeon and use the on-board intel card it will boot ok.

I can boot from my other SSD which is pre Anniversary Update and everything works fine with the Radeon R9 installed.
I have no idea what to do next. Any help is appreciated.

More replies
Answer Match 80.64%

This box came with windows 7 64 bit Home OS.  I recently upgraded to the windows 10 OS in order to take advantage of the latest OS.  Around August the windows 10 anniverary update became available but upon attempting multiple times it have failed.  I receive a 0xc1900200 error and a reference to the system reserved partition not being big enough.  I don't seem to see a partition called System Reserved partition but have tried to expande what looks like a 100 MB SRP, using Partition Magic.  It doesn't let me change this 100 MB partition.  The PC runs fine but because of MS auto updates, which I need to keep other MS software up to date, I get regular failures of the Anniversary update release.

More replies
Answer Match 80.64%

Hello to everyone.
i have sucessfully installed the update Anniversary of windows 10 x32 to my tablet what i have is an nextbook of 7inches which has 16GB of storage and just if try to update will get the message of not enough space to do the update, in this poost will detail how to do the install without die on the attempt. the time that takes in do the update is about 4-6 hours due the low specs of this tablet, can also be for any tablet that has 16GB storage.
Materials to use list
an empty micro SD card of 32-64GB of capacity, i used an micro sd card of 64GB for this procedure.
i say empty because i have tried use an card with files inside and the tool media creator erased all my files so i do emphasis in this
preparation of the SD card memory
in an card reader in another computer download from the Media tool creator the version of windows 10 that your computer use, and use the SD card to store the version of windows from media tool.
i know many tablets has OTG capabilities but have to keep in mind the following.
if your tablet gets the battery charged via an micro USB connector, then you must use the method of do the upgrade by Micro SD card, since the installation will take 3-6 hours so need keep the tablet powered and plugged to the wall socket all the time , if ran the set up by battery will get no power in no time and will brick your tablet forever, or in the best of the chances will get back automatically to the wind... Read more

More replies
Answer Match 80.64%

So this is very frustrating... I'm trying to install the anniversary update, and used the upgrade assistant. But when it restarts, it flashes for just a second the update screen, then shuts off and restarts again and loads without the update...

Any idea what I did wrong? I even reset the PC and it's still causing issues...

Any help would be appreciated.

More replies
Answer Match 80.22%

Install error code 0xc1900200
What is the problem??

More replies
Answer Match 80.22%

Trying to run the update, everything seems to run fine, and then I get a message about uninstalling an app that isn't compatible, but it isn't listed? I'm currently on Windows 10...
I've attached a screenshot.
I've tried doing a clean boot and still got the same results.

A:Anniversary Update Error

Originally Posted by maevinj Trying to run the update, everything seems to run fine, and then I get a message about uninstalling an app that isn't compatible, but it isn't listed? I'm currently on Windows 10...
I've attached a screenshot.
I've tried doing a clean boot and still got the same results. Do a antymalware cleanin and check old progrs forgotten in you pc

1 more replies
Answer Match 79.8%

Please help!
After yesterdays update (I used the media creation tool), I now have 3 partitions on my C drive.
The top drive, before the update, didn't have the partition on the right (NTFS 450MB used).
My boot file were in my "E" drive, but now where are they?
Can I get rid of that 450MB???

Here's a different view of the partition:
If I open the 450MB partition and here's what is in it:

Here's what's in the "E" patition:

More replies
Answer Match 79.8%

Hi all,

Wondering if anyone else has experienced an icon display issue on their start menu with the 1607 update?

I have just clean installed (and fully updated) the 1607 Anniversary Update on 2 PC's and both are experiencing an identical issue with their start menu. The problem whilst seemingly minor is especially annoying given that I have performed the updates for some friends and it is a matter of pride to me that I hand over any such systems in a perfect state.

The Start Menu program list (A - Z list) as well as the "most used" and "recently added" lists contain icon tiles for the installed programs. On both systems around 25% of these tiles display a generic "blank page" image rather than the icon image associated with that program. That said the tile in question opens it's associated program and it's text label also displays correctly.......as I said earlier an annoying niggle!

By now you are all thinking ah its a icon cache failure just rebuild the icon cache!! I have of course rebuilt the icon cache following the instructions contained in option 2 of the tutorial here www.tenforums.com/tutorials/5645-icon-cache-rebuild-windows-10-a.html as well as deleting the C:\Users\<Username>\AppData\Local\IconCache.db file neither of which corrects the issue.

Additionally, I have manually, refreshed several of the icons (right click button tile > more > open file location) by changing and then reverting the .ico file through propert... Read more

A:Anniversary Update - Clean Install. Start menu anomaly

Hi, some ideas - you may have come across these already... fortunately this hasn't happened to me
(Yes, it says tiles, but appears to be talking about the icons)
Windows 10: How to fix blank tiles on Start Menu

Stardock products:
Windows 10 - Blank start menu icons - Super User

How does it look if you create a new user for test purposes?

P.S. I don't use Win 10's start menu - I use Classic Shell (free) to avoid all the issues and actually have a properly expressed start menu that I don't have to fight with. Eg. in Win 10's version of my Start Menu I see
Help
Help
Help
Help
...

- all shortcuts from individual subfolders for different programs, extracted and listed alphabetically. Some help that is.

more replies
Answer Match 79.8%

Hi all,

Wondering if anyone else has experienced an icon display issue on their start menu with the 1607 update?

I have just clean installed (and fully updated) the 1607 Anniversary Update on 2 PC's and both are experiencing an identical issue with their start menu. The problem whilst seemingly minor is especially annoying given that I have performed the updates for some friends and it is a matter of pride to me that I hand over any such systems in a perfect state.

The Start Menu program list (A - Z list) as well as the "most used" and "recently added" lists contain icon tiles for the installed programs. On both systems around 25% of these tiles display a generic "blank page" image rather than the icon image associated with that program. That said the tile in question opens it's associated program and it's text label also displays correctly.......as I said earlier an annoying niggle!

By now you are all thinking ah its a icon cache failure just rebuild the icon cache!! I have of course rebuilt the icon cache following the instructions contained in option 2 of the tutorial here www.tenforums.com/tutorials/5645-icon-cache-rebuild-windows-10-a.html as well as deleting the C:\Users\<Username>\AppData\Local\IconCache.db file neither of which corrects the issue.

Additionally, I have manually, refreshed several of the icons (right click button tile > more > open file location) by changing and then reverting the .ico file through propert... Read more

More replies
Answer Match 79.38%

I have a Dell XPS 8700 that failed Windows 10 anniversary update until UEFI secure boot was turned off. It apparently then completed but I cannot re-enable secure boot without the same boot problem advising
Recoveryyour pc/device needs to be repaired / during Windows 10 anniversary updateAn unexpected error has occurredError Code 0xc0000185you'll need to use recovery tools.   Is there a solution to enable UEFI secure boot ?
 I am using a Dell XPS 8700 pc with an SSD drive. The Windows 10 update was installingthen after one of the reboots the error above  The pc was running prior to the update and had UEFI OS , secure boot enabled,  no prior problems.I attempted to do any of the safe mode boots but none would proceed.Disabling the UEFI safe/secure boot mode apparently let the install continue and the das it did before with I believe completion of the installation of Windows 10 anniversary update.PC now shows Windows 10 home Ver 1607 ..
The problem returns if I enable UEFI secure boot and the PC stops. I would like to determine a wayto locate the problem or issue. related to the secure boot.  Using the media creation tool may justrepeat the problem once secure boot is re-enabled.
 Dell lists that they have tested XPS 8700 with this update and have not indicated problems no mention of secure boot issue.

More replies
Answer Match 79.38%

I have a Dell XPS 8700 that failed Windows 10 anniversary update until UEFI secure boot was turned off. It apparently then completed but I cannot re-enable secure boot without the same boot problem advising
Recoveryyour pc/device needs to be repaired / during Windows 10 anniversary updateAn unexpected error has occurredError Code 0xc0000185you'll need to use recovery tools.   Is there a solution to enable UEFI secure boot ?
 I am using a Dell XPS 8700 pc with an SSD drive. The Windows 10 update was installingthen after one of the reboots the error above  The pc was running prior to the update and had UEFI OS , secure boot enabled,  no prior problems.I attempted to do any of the safe mode boots but none would proceed.Disabling the UEFI safe/secure boot mode apparently let the install continue and the das it did before with I believe completion of the installation of Windows 10 anniversary update.PC now shows Windows 10 home Ver 1607 ..
The problem returns if I enable UEFI secure boot and the PC stops. I would like to determine a wayto locate the problem or issue. related to the secure boot.  Using the media creation tool may justrepeat the problem once secure boot is re-enabled.
 Dell lists that they have tested XPS 8700 with this update and have not indicated problems no mention of secure boot issue.

A:XPS 8700 needed UEFI secure boot disabled to complete Windows 10 anniversary update can't enable UEFI secure boot now

rdubayah,
If your computer was running WIndows 10 without any issues prior to downloading the Anniversary update, then you would not have had to change any settings in the bios to install the update.The UEFI and Secure Boot settings are to enable booting with a USB or DVD to install Windows.
Disable Legacy Boot Mode and Enable UEFI
Start the computer and TAP the F2 key to enter the bios. Once in the bios Press F9 to Restore the bios to the Default Settings. F10 to save changes and exit. You could have a hardware problem. To run a hardare diagnostics on the computer you would start the computer and TAP the F5 key. Insert a cd/dvd in the optical drive for running the diags.

4 more replies
Answer Match 79.38%

Hi and greetings from Sweden!

New on the forum, long time lurker.

So my problem. Windows 10 wont update. Error code "0x800703ee". Things i have tried so far:
Cleaned and restarted Windows UpdateSFC /ScannowFollowed this guide: http://answers.microsoft.com/en-us/w...d-8928bd7831beTried updating via ISO

A while ago i had to recreate my EFI parition, perhaps it has something to do with it?
The last thing is to do a clean install, but such a hassel with all my hours of customization down the drain.

Thank you in advance.

More replies
Answer Match 79.38%

Trying to update using Windows 10 Update assistant as automatic update not showing yet. It checks my system then downloads ok but once it starts it stops at 1 or 2 % and says "Something waent wrong " and gives error code 0x80070057.

All previous updates have been fine.

A:Anniversary Update error 0x80070057

Did that for me so i went the media creation tool way to install it

1 more replies
Answer Match 79.38%

Trying to update to the Anniversary Win 10 and after about an hour of "thinking" it said that it couldn't finish because of Error 0xc190012f. Currently the PC is running Win 10 with no outstanding updates, as far as I know.

Anyone else get this error or have a suggestion as to how to proceed?

Gerry

More replies
Answer Match 78.96%

I just got this update and restarted my PC. Now Cortana is not there even after I set my region language and speech to united states. Help
Posted via the Windows Central App for Android

A:Cortana disappeared from anniversary update after getting the cumulative update 14393.10

Originally Posted by buddy007 I just got this update and restarted my PC. Now Cortana is not there even after I set my region language and speech to united states. Help
Posted via the Windows Central App for Android try a restart and check again
It does not appear in apps list?

4 more replies
Answer Match 78.96%

I have an existing Windows 10 Pro installation. My partitions are:
system reserved: 500 mb
C: boot, page file, primary partition
E: logical drive
F: logical drive
I would like to do a clean install with WIN 10 Anniversary Update (1607), and convert my disk from BIOS to UEFI.
What modifications would i need to do to GPTgen while upgrading and maintaining my programs and data?

Thanks

A:clean install with anniversary update & disk conversion BIOS to UEFI

Modifications....none.

Windows 10 already utilizes GPT partitioning....on a clean install. The only thing you would need to do is change your BIOS firmware from Legacy BIOS to UEFI BIOS. You will need to confirm that in your BIOS. Or to check with in windows.....in the search bar of cortana, type system information and when the window pops up, scroll down to BIOS mode......here's mine.

2 more replies
Answer Match 78.54%

On my Son,s computer . Before the update I made a image with macrium reflect , updated and the computer will not run , I keep getting a attempted switch from dcp error after anniversary update .. Ideas , thanks .

More replies
Answer Match 78.12%

Running Windows 7 Home Premium x64
Cannot update, attempting to upgrade to Win 7 professional. Discovered automatic updates were fried for some time and the system did not have SP1, which is apparently required for the upgrade.

I see similar threads, each seems to require advanced individual registry repair so starting my own - if there is a generic fix please reply with it and I can give it a shot. I have tried the normal tools to fix without change- see below.

Symptoms:
Windows updates fails with an error code 8007370B - Windows Update encountered an unknown error

I have run SURT several times successfully
I have run Fixit 50202, MicrosoftFixit.wu.LB.133286320513446086.5.1.Run,
Each returns 'Repair Windows Update components' and 'Windows Update components must be repaired'
All claim to have fixed the problem (no change, naturally)
Attempted to run SFC /scannow from an elevated prompt and it fails with 'Windows Resource Protection could not perform the requested operation'. Same behavior when attempted from Safe Boot.

Downloaded and attempted to install SP1 locally, both the all platforms version and the Win7 x64 version. Both fail with errors.

Ran the Norton remover tool and Macafee remover tool - think Norton came with the system but was never activated, ran the Macafee remover tool just to be sure.

Have renamed the Softwareupdate folder without any change.


Uploaded CBS logs
Download CBS.zip from Sendspace.com - send big files th... Read more

A:Win7 home update fails, error 8007370B - cannot update, install SP1.

See most of the repairs require the components file as well

Download COMPONENTS.zip from Sendspace.com - send big files the easy way

9 more replies
Answer Match 78.12%

Hi,

I just downloaded and installed the Windows 10 Anniversary Update yesterday and so far I have noticed some changes in my computer that I was not aware of before the update.

(1) Somehow my System Restore was set to Disabled and all of my restore points are now gone and

(2) All of my Microsoft Update History is also missing.

Could the update be the cause of both?

Thanks and regards,

2harts4ever

A:Update History missing after Win10 Anniversary Update

Yes, the update is the cause of both.

Major version upgrades like this change so much functionality, they often have to reset various settings to default so that they are in a known good state. Unfortunately, many have complained about the System Restore option being reset to Disabled (this is the Windows default).

As for your previous restore points, that's to be expected. You can't restore to a previous restore point on a previous OS version. All the baseline files are different, and you would be restoring settings for the old OS if you were to somehow be able to restore it.

Think of it like a Bookmark or favorite, but they've moved the location to a different URL. Restoring the old favorite only points you to somewhere that doesn't exist anymore.

As for #2, your update history is gone because again, it's a fresh OS, and previous updates are all integrated into the OS now, not patches. Those old updates don't apply to the new OS anymore.

more replies
Answer Match 78.12%

Hi,

I just downloaded and installed the Windows 10 Anniversary Update yesterday and so far I have noticed some changes in my computer that I was not aware of before the update.

(1) Somehow my System Restore was set to Disabled and all of my restore points are now gone and

(2) All of my Microsoft Update History is also missing.

Could the update be the cause of both?

Thanks and regards,

2harts4ever

A:Update History missing after Win10 Anniversary Update

Yes, the update is the cause of both.

Major version upgrades like this change so much functionality, they often have to reset various settings to default so that they are in a known good state. Unfortunately, many have complained about the System Restore option being reset to Disabled (this is the Windows default).

As for your previous restore points, that's to be expected. You can't restore to a previous restore point on a previous OS version. All the baseline files are different, and you would be restoring settings for the old OS if you were to somehow be able to restore it.

Think of it like a Bookmark or favorite, but they've moved the location to a different URL. Restoring the old favorite only points you to somewhere that doesn't exist anymore.

As for #2, your update history is gone because again, it's a fresh OS, and previous updates are all integrated into the OS now, not patches. Those old updates don't apply to the new OS anymore.

2 more replies
Answer Match 78.12%

Hello,
I've been trying and failing to update Anniversary Update on Surface Pro 3.
Downloads, prepares, reboots and then, at about 14% of first step, it shows the thermometer gauge and shuts down.
When I power it on, it reverts to previous version of windows
I've tried it plugged in, plugged out, waiting a few minutes shutdown before starting in updating mode...
I don't know what to do

A:Failing to update Anniversary Update on Surface PRO 3 - overheating?

Originally Posted by Windows Central Question Hello,
I've been trying and failing to update Anniversary Update on Surface Pro 3.
Downloads, prepares, reboots and then, at about 14% of first step, it shows the thermometer gauge and shuts down.
When I power it on, it reverts to previous version of windows
I've tried it plugged in, plugged out, waiting a few minutes shutdown before starting in updating mode...
I don't know what to do the thermometer gauge represents your surface pro is getting overheated and in order to prevent heat damage to the core hardware the device/bios shuts down your device. so first we need to fix the overheating issue and then can you continue with the update.

1 more replies
Answer Match 78.12%

Prior to the update my computer never froze, suddenly one day after the update it happens non-stop.I Google and found out a lot of people are affected.Is there anyone that can help me so I do not need to wipe my computer...

More replies
Answer Match 78.12%

Prior to the update my computer never froze, suddenly one day after the update it happens non-stop.
I Google and found out a lot of people are affected.

More replies
Answer Match 77.7%

This update failure has occurred 5 times in the past three days on 32 bit system. My Win 8 update was purchased from MS in Nov. 2013 and installed then. During this recent update process I have updated Nividia card w/latest 32bit drivers and updated motherboard Intel chipset. This morning I ran SFC and found no integrity violations. DISM /restorehealth and /componentcleanup repaired and all OK. Still failed. Have read Barnacle's post and find 5 updates he mentions are missing. Need help getting them, if needed, and having problems doing so. Other guidance and suggestions appreciated.

A:Win 8.1 update fails repeatedly at 83% 0xC1900101-0x2000A

I suggest before running update:
Delete everything under: C:\Windows\SoftwareDistribution\DownloadDisable completely any anti virus softwareTask Manager -> Startup and disable everything in this tab.Win+X->Run and type: msconfig. On services tab, tick on: Hide all all Microsoft services then tap on Disable allPerform step 2 from this link: AUTOCHK Initiation Countdown Time - Change - Windows 7 Help Forums (the default in Windows 8 set to 1) then run: chkdsk C: /r <===== This may take a while to complete.Run Update.

8 more replies
Answer Match 77.7%

I have been attempting to upgrade windows 10 pro, from version 10240 to version 1607 (anniversary update). I have tried both the Windows 10 Upgrade Assistant and the media creation tool (ISO). I get to 96% and, boom, every time it resets and restores my system to where it was before the upgrade started. The error I get is as follows:

0x8007042B - 0x4001E
The installation failed in the SECOND_BOOT phase with an error during PRE_OOBE operation.

I have searched for an answer and haven't found one. I have tried to trouble shoot it as best I can by unplugging everything but my keyboard/mouse, updated chipset, etc.. MS techs haven't been much help. Any thoughts? The iso is not on the OS drive, not sure if that matter. I would rather not have to nuke the system. I hate having to reinstall programs (adobe is the worst). Any help is appreciated.

Thanks.

More replies
Answer Match 77.7%

Hi
Checking update history shows no errors, just the update waiting to be installed.
Here's what happens: update goes all the way through to the end, then it hangs with a black screen with the little dots going round and will sit like that for as long as I'll let it. There's no hard drive activity during this period.
When I eventually get bored of waiting, I do a hard reboot and the previous version is reinstated.
Any ideas how to move on from this?

A:Win10 Anniversary Update fails, but no error code.

To update to anniversary update and face minimum bugs or none use media creation tool by Microsoft. By personal experience it is the best way to upgrade to anniversary update.
you could download the media creation tool here: http://forums.windowscentral.com/e?l...token=3lPiByUm
Here is a knowledge article on How to by Windows Central: Use the Microsoft media creation tool to force the Windows 10 Anniversary Update today | Windows Central
At present you could try disabling any Antivirus. Disconnect any external devices you don't need and retry installing.
If you need additional help or want to reply to this thread , learn how to join windows central.

1 more replies
Answer Match 77.7%

Hi guys. I am seeing this error twice on every boot since upgrading (even a clean install doesn't clear it).


Code:
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 04/08/2016 02:03:45
Event ID: 10016
Task Category: None
Level: Error
Keywords: Classic
User: LOCAL SERVICE
Computer: Chris
Description:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{6B3B8D23-FA8D-40B9-8DBD-B950333E2C52}
and APPID
{4839DDB7-58C2-48F5-8283-E1D1807D0D7D}
to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="0">10016</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2016-08-04T01:03:45.289910000Z" />
<EventRe... Read more

A:Permissions error (CLSID/APPID) since Anniversary Update

Same here. Upgraded from Win 7 Ultimate to Anniversary Edition using the Media Creation Tool.

8 more replies
Answer Match 77.7%

I have been attempting to upgrade windows 10 pro, from version 10240 to version 1607 (anniversary update). It looks like I have been stuck on 10240 so some time. I have tried both the Windows 10 Upgrade Assistant and the media creation tool (ISO - both from the HDD and bootable USB). I get to 96% and, boom, every time it resets and restores my system to where it was before the upgrade started. The error I get is as follows:
0x8007042B - 0x4001E
The installation failed in the SECOND_BOOT phase with an error during PRE_OOBE operation.
I have searched for an answer and haven't found one. I have tried to trouble shoot it as best I can by unplugging everything but my keyboard/mouse, updated chipset, etc.. MS techs haven't been much help. Any thoughts? I would rather not have to nuke the system. I hate having to reinstall programs (adobe is the worst). Any help is appreciated.
Thanks.

More replies
Answer Match 77.7%

original update went fine. 1511 update went fine. plenty of space on drive. plenty of available memory. windows defender security installed. ?

More replies
Answer Match 77.7%

I am trying to update to Anniversary edition of Windows 10 on 32GB ASUS Tablet. The update to 1511 went just fine. Now I am getting error when trying to upgrade to 1607 using Windows10Upgrade.28084. It checks compatibility and CPU, Memory and disc capacity all show good. Then get the page which shows error code 0x80070070 and states not enough space to install and suggests disc cleanup. Did that and have 18.0GB free space. But it will not let me download and install the upgrade. I do not have any apps running which I can remove. Surely 18GB is enough space. Please respond with a fix for me. Tablet is running 32bit OS

More replies
Answer Match 77.28%

I have the Dell Inspiron 7559 (non-touch) and was able to install the Windows 10 Anniversary Update today after a long session of sitting though Windows Updates. Everything seemed to work fine, except that I had to uninstall my antivirus (Symantec Endpoint Protection). No biggie, I'll just reinstall it after the update. I think it also said that the Intel WiDi drivers had to be uninstalled as well, which it did automatically, but that was all that happened during that process.
So I attempt to do so, and I was able to install it via the .msi file (the .exe file wouldn't work for some reason), and the computer begins to reboot. Constantly. The laptop would freeze somewhere from when the login screen appears to a couple minutes after that. It would hang for a couple minutes, then reboot. It rebooted enough times for it to go to the Windows 10 recovery options. I just told it to restart so that I could tell it to boot into safe mode on the next bootup (shift-click restart when I got inside Windows). It works, and I then tell it to boot into safe mode.
Now my laptop won't boot at all. It won't go past the Dell logo. I can enter the BIOS and the boot options menu, as well as load the ePSA diagnostics tool and have the tests pass (no errors). But it won't get past the Dell logo after this. It doesn't restart, flash lights or anything like that. Just hangs on the Dell logo.
How can I resolve this issue?

More replies
Answer Match 76.44%

Strange things are happening here on my W10x86 Pro system, and I am worried...

After being shut down for some time, I turned on this computer yesterday Monday, and it finished configuring some updates that it had apparently installed last time I shut it down. When shutting it down on Monday evening, it again goes into installing updates, but looking like it was stuck on 0%. After an hour I just let it sit over night, and this morning it had shut down. Then today when I turn it on in the afternoon, it goes into configuring a big update, before booting up, taking close to 30 minutes and restarting three or four times, showing me this screen
http://blogs-images.forbes.com/anton...w10-update.jpg that I have never seen before.

After the half hour it tells me that it has updated my W10 and there are lots of new exciting things. Naturally I thought that this was the Anniversary Update, so I looked into the Update History, and to my surprise this was entirely empty. "No updates installed yet", it told me.

Then I manually clicked "Check for new updates", and then it finds lots of updates, like "Cumulative Update for Windows 10 Version 1511 (KB3176493)" and a whole bunch of other updates all numbered with 1511.

I am baffled here... what goes on?

A:Long update wasn't the Anniversary Update... what was it?

What does "winver" show?

4 more replies
Answer Match 76.02%

Everything seems to be running OK, but computer takes longer to shutdown.Has anyone else notice this ?

A:Windows 10 Anniversary Update

Originally Posted by zplugger


Everything seems to be running OK, but computer takes longer to shutdown.Has anyone else notice this ?



Do you have Fast Startup turned on in Power Options/change what the power buttons do?

That speeds up boot time, but makes shutdown a bit slower, as then the system needs to write your current state to a hiberfile.
More information at the top of this tutorial: Fast Startup - Turn On or Off in Windows 10 - Windows 10 Forums

0 more replies
Answer Match 76.02%

I have read other threads on this subject and have not found the solution to my problem in them.

The Windows 10 Anniversary Upgrade Assistant Icon appeared on my desktop. I began the process to update and received the error, SOMETHING WENT WRONG (code 0x80070057).

Then I took the following steps:

Did a CC clean of drive. Got same response.
Did a disk doctor and then tried again. Same response.
Did SFC/scannow. Got same response.
Did checkdsk/. Got same response
Did Windows update diagnostic and got SERVICE REGISTRATION IS MISSING OR CORRUPT.

What do I do to correct the problem?

A:Windows 10 Anniversary Update

This worked for me. May not solve your issue but worth a try. (see my post)

"Got it updated. On the MS Forum it seems to have been an issue for lots of users. One work around suggested was to disconnect (immediately) any wifi/ethernet connection when update sticks at 2%. Count to 30 or 40 and re-connect."

Strangely this worked and update completed.

2 more replies
Answer Match 76.02%

update does not install

A:Windows 10 anniversary update

What errors are you seeing?
Check here: Windows 10 Anniversary Update common problems and how to fix them

2 more replies
Answer Match 76.02%

Hi i was wondering what the update will in tale cause it seems like internet explorer is stuck and wont close out and the mail app on it really isnt that great

More replies
Answer Match 76.02%

Should I update to windows 10 anniversary? Has anyone had any issues with the update?

More replies