Tech Problem Aggregator

HP 9470m Elitebook will not start up on the dock

Q: HP 9470m Elitebook will not start up on the dock

I have an HP 9470m Elitebook that will not start up on a docking station. When starting up, it freezes on the "Please Wait" screen before login. I have tried it on 3 different docking stations with the same results. The BIOS are up to date. There is a driver update for the dock available, but it requires it to be plugged into to the dock, and when I dock the computer after start-up and try to install, I get the error message: ?Please connect at least one monitor to the dock and then continue.? Unfortunately, this computer is also now just about 2 weeks out of warranty.

More replies
Answer Match 76.86%

What's the Max SSD I can upgrade go on HP Elitebook folio 9470m . i7 -3667u, 8gb ram ?

A:Max ssd upgrade for HP Elitebook folio 9470m ?

256Gb is the tested capacity.I would expect it to work with greater capacity though.here are the quickspecs:http://www8.hp.com/h20195/v2/GetPDF.aspx/c04111459.pdf 

1 more replies
Answer Match 76.86%

I just recently purchased a Samsung 500GB SSD and I want to add this drive to my existing storage on my HP EliteBook Folio 9470m. The laptop currently has 256GB of SSD stock on it and I'd like to add an additional 500GB. I see that there is a connection that I'm missing. Anyone have the exact part that would service this connection?  Or try this link if pics don't show up  Pictures of what I'm referring to on my notebook  Thank you all!!  

More replies
Answer Match 76.86%

Hi there, I have an issue with non-responsive Brightness Adjustment on my laptop.  Symptom is that brightness does not increase or decrease when adjusting the setting using the FN Key + F9/F10 which are the designated buttons to adjust. There is also no change when I unplug from power outlett (which in theory should make the screen brightness come down). I have installed the latest bio, and have tried looking for new software/drivers, but to no avail... I simply can't reduce the brightness (and it's quite bright - to the point it is uncomfortable to use at night). Suggestions how to handle?

More replies
Answer Match 76.02%

Hi Team, I need Need SC.BIN file for HP EliteBook Folio 9470m Ultrabook. My Product Number is: D4R81UC#ACJ Kindly help me. Thanks,Abhiram

More replies
Answer Match 76.02%

Hi, after updating my HP Elitebook Folio 9470m to Windows 10 Pro 64, I am no longer able to shot down the PC.Every time I am trying to do a shot down, the windows screen turns into black for a few seconds and than reappears.I already did install the BIOS update version F.62 REV: A PASS: 1, as someone on the net said a BIOS update would help.Unfortunately this was not a solution. Thanks for your help

More replies
Answer Match 76.02%

Hi, Appreciate if you can propose workable WWAN Card module that can operate and have the 4G/LTE functional in Malaysia. I'm using the HP EliteBook Folio 9470m with Windows 10 Professional (64-bit) installed on-board. I hv surf through and the only recommended WWAN Card is HP hs2350 HSPA+ Mobile Broadband Module which limited to 3G coverage. Is HP lt2522 LTE/EV-DO Mobile Broadband Module- U.S. only* (no Win 8 support), workable in Malaysia i.e,  Kuala Lumpur?  Rgds,Firdaus

More replies
Answer Match 75.18%

Computer - HP Elitebook Folio 9470m OS - Windows 10 Pro, 64 bit Processor - Intel CORE i5-3427U CPU @ 1.80GHz  2.30 GHz Display adapter- Intel HD Graphics 4000 Anybody know why this unit won't support dual/multi-screen display? When the second, external monitor is connected by VGA to VGA, nothing happens on the Control Panel/Display/Change Resolution page. The drop-down box where mulit-screen display should be selectable offers only "1. Generic Non-PnP Monitor".....and nothing else. Thanks for any insight.Michael




Better to have one and not need it than to need one and not have it.Michael

More replies
Answer Match 75.18%

Gurus, Will someone help me in getting the Bios Administrator Password for my HP EliteBook Folio 9740 with SN: CNU313CK1B Appreciate your help Regards,TR 

A:Bios Administrator Password for HP EliteBook Folio 9470m

Hello Tejas, We would need the screenshot of F1 screen. To generate smc.bin file. best is contact HP chat support or phone support and send the f1 screenshot, they will generate in 10mins and provide it to u.




Regards;SmileyI am an HP employeePlease click the White Kudos star to say thanks for helping.Please mark Accept As Solution if my help has solved your problem.

1 more replies
Answer Match 66.78%

I'm trying to connect three ZR2440w displays to my EliteBook 745 G3 using the Ultraslim Docking Station. The tech specs for the 745 state that it supports 3 independant displays if used with the dock. How?Connecting two with the DP, and one DP/VGA adapter only allows use of two displays. The 3rd is recognized but I cannot configure it and the screen is black. Swapping cables and connections netted the same result but open windows were left on the third display forcing me to move each back to the first two.  How do I get all three displays to work? I can't find any documentation on this at all.

More replies
Answer Match 66.78%

I have my Elitebook 850 G3 in an Ultraslim Docking Station with two monitors connected to the display ports. I want to have something different on each display - laptop and the two monitors. But it will only allow me to have two different displays. I can extend to one display, but can only mirror the other two. When I go to the control panel for my Intel HD graphiics, it only shows one display port even though there are two on the docking station.

More replies
Answer Match 65.52%

I've seen this issue on two separate HP EliteBook 840 G1 laptops now, it's the same build, but different methods of installing Windows 10.The first was a straight 8.1 to 10 upgrade so there were a lot of variables to throw in there with preinstalled software/drivers and such. The second is a 100% fresh build. Clean install of Windows 10 x64 Enterprise.Installed each HP driver in recommended order.Installed all Windows 10 updates. I have 2 HP LV2311 monitors and an HP slim dock.840 G1 has the AMD Radeon HD 8750M as well as the Intel HD graphics. If I dock the laptop and power it on the 2 screens will work normally.If I undock the laptop while powered on and open the lid the laptop's display will never come on. I've tried to put it to sleep and wake it up, it does not work.  The only way to get the laptop screen to work is to do a complete shutdown by forcing the laptop's power off.  Once it's off I can power it back on and the laptop's display works properly.It works the same way the other way as well.If I have the laptop display on and then dock the laptop, the dual displays never display anything.  If I shut the lid without powering it down and put the laptop to sleep, the displays never turn on.  If I wake it up, the displays to not function.  Again the only solution to get the dual monitors to work once docked is to power the laptop down entirely and then turn the laptop back on.The laptop, dock and graphics are obviously not working... Read more

A:HP EliteBook 840 G1, Windows 10, Hybrid Graphics, Slim dock ...

JulezMBI  Ultraslim Docking Station Please update the Firmwareftp://ftp.hp.com/pub/softpaq/sp69001-69500/sp69276.exe have you the new Bios installed? Intel HD i think you perform windows update Uninstall both Graphics driver Reboot Install the new intel HD  normally installed to the HP Graphics Driver in the Elite SeriesThis is an exception Test the Docking Station Optional CUSTOMER ADVISORY 

9 more replies
Answer Match 64.68%

Hey Guys,
 
I have a similar problem with the HP 2013 Ultraslim Docking Station (Product: D9Y32AA Rev V1.00) with the Elitebook 840 G1 (latest BIOS and driver) - connected over HP Display Port Adapter to DVI and sound cable (3,5mm audio jack) The result is that we get teriible noise / swoosh from the internal display speaker.
 
 
P.S. This post has been split off from other thread. - HP Forum Moderator

























Foto 4.JPG ?454 KB














Foto 3.JPG ?498 KB














Foto 1.JPG ?708 KB

A:noisy sound issue EliteBook 840 G1 and 2013 UltraSlim Dock

DG-PCsevice Please install the Display drivers Update the BIOS 01.09 (12 Mar 2014) without the Dockhttp://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405365&sp... After Bios update install the new HP 2013 Ultraslim Docking Station DisplayPort Hub Firmwarehttp://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405365&sp... Optional uninstall the IDT driver Reboot and installt the newhttp://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405365&sp...  Is the problem not solved Please uninstall the AMD and Intel Video driver Reboot the System Install the new INTEL HD and reboothttp://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405365&sp... Install the new AMD Driver http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405365&sp...Reboot Please deactivate for all install process the Virusscanner     

3 more replies
Answer Match 62.16%

Trouble started with random system restarts anywhere from 2 to 60min after powering on. That lasted a few days. Than it got worse, it was stopping before system boot with error message: motherboard product information missing. After a soft or hard reset (can't remember now) it stopped displaying anything, only LEDs came on and fan run, all lasting about 5s. I tested RAM in other machine, OK. Pulled HD out, no difference. Put a different HD in, no difference. With DC disconnected and battery out I left CMOS battery disconnected overnight. Now it cycles: LEDs and fan come on for about 5s, all off for 1s and tries again. Any help will be appreciated... Best regards

More replies
Answer Match 62.16%

HiNot sure if my post was noticed as posted over weekend and got no reply so I'm trying again.Trouble started with random system restarts anywhere from 2 to 60min after powering on. That lasted a few days. Than it got worse, it was stopping before system boot with error message: motherboard product information missing. After a soft or hard reset (can't remember now) it stopped displaying anything, only LEDs came on and fan run, all lasting about 5s. I tested RAM in other machine, OK. Pulled HD out, no difference. Put a different HD in, no difference. With DC disconnected and battery out I left CMOS battery disconnected overnight. Now it cycles: LEDs and fan come on for about 5s, all off for 1s and tries again. Any help will be appreciated... Best regards

More replies
Answer Match 58.8%

My Windows 7 Operating system is taking a lot of time during Start up.I was looking for an alternative to the regular icons ,scattered all over my desktop.So,i decided to try Docks such as Rocket Dock,Object Dock,Nexus,Rk Launcher or similar dock....It certainly looks beautiful but now i am skeptical if these are causing my system to load very slowly during Windows Start up..

Also,now i am using a Windows Task bar Software which lets me pin any program shortcut on my task bar. So,my task bar is filled up with many icons.Is that the cause of a slow start up or the Docks...

A:Does DOCK's (such as Rocket Dock,Object Dock etc) makes computer slow?

  
Quote: Originally Posted by fahadhum


My Windows 7 Operating system is taking a lot of time during Start up.I was looking for an alternative to the regular icons ,scattered all over my desktop.So,i decided to try Docks such as Rocket Dock,Object Dock,Nexus,Rk Launcher or similar dock....It certainly looks beautiful but now i am skeptical if these are causing my system to load very slowly during Windows Start up..

Also,now i am using a Windows Task bar Software which lets me pin any program shortcut on my task bar. So,my task bar is filled up with many icons.Is that the cause of a slow start up or the Docks...


You can use MSconfig to diagnose startup issues. Visit the following link for details;

https://www.youtube.com/watch?v=iku_aPUsVQ4

You can post back with any questions regarding your system services and startup entries to establish their purpose and whether or not they are required at startup.

Taskbar icons are just shortcuts and do not effect the time it takes for starting a computer.

HTH

9 more replies
Answer Match 51.66%

Hi,  I currently can not turn my computer no. i press the start button and the start button along with the keyboard back light flash on and the off. then nothing for about 3-5 seconds and then the start button and keyboard back light flash again. the lights turning on and off continues for as long as it. can anyone suggest a solution?  Matt 

More replies
Answer Match 50.82%

My laptop does not startup since this morning, afterit worked yesterdayjust fine. Tried the hard startup as described a few times, starting up on the battery only (was full when I turned of my laptop last night) and without the battery on only the ac etc.When I press the power button the light at the button goes on aswell the little led light at the front. No other sounds of things go on and after around 3 seconds the white light goes of and the orange led light at the front gives one flash.I amafraid it has something to do with the windows 10 update I had last weekend, putted my laptop in sleep mode after that I'm afraid and thiswas the first restart after it. Of course should an update of OS not cause problems like this.Hope that there is any onewho can help me.

More replies
Answer Match 50.82%

Hi folks... I have an HP EliteBook 2170p that will not start.  No POST, no mechanical noises, no beeping, nothing.  Totally dead.  The power light (the little white LED next to the lightning bolt) is lit, so I know it's getting power--from both the battery and the power supply.  A user brought it in saying "it won't start," and didn't elucidate on what she had done with the laptop right before it wouldn't work anymore. Any ideas of what I can look at to hopefully fix this would be greatly appreciated. Thanks!

A:hp elitebook 2170p won't start

I would suggest you to try with another power adapter thought you are getting power lights.Step 2 >> try holding down the power button for 40 seconds without the battery and power adapter, check if that helps you if not I believe some hardware issue Click on " Kudos Star " icon on left hand side if resolved.I am a HP employee, but the comments in this forum is of my own and does not represent HP

2 more replies
Answer Match 50.4%

hello
i have a weird issue that i lose the Bluetooth after an hibernate or dock de-dock of the laptop..

the bios is the latest A18.
we try to uninstall and reinstall the driver and application same thing.
we are running windows 10 OS

Thanks

More replies
Answer Match 50.4%

Dear Hp team,I am the user of hp product since long time and the services are all good.Currently i owned hp elitebook 8460p.Recently from 15 days i am facing unusual problem, i am facing 2 problems. 1. The laptop does not power on using power key but if i click power key along with HP QuickWeb button it immediately power on. 2.The second problem is that as i start my laptop it shows bios either missing or corrupted (501) error.I tried all error as given in forum but nothing works. I am a developer and need an urgent solution since it somehow affects my work. Thank you 

More replies
Answer Match 50.4%

 We have an Elitebook 8440p which is not starting up anymore. As soon as I turn it on the blank screen start to flash up the  hp sysmbol  in the centre on the  screen, with a small message at the bottom saying ''Press the Esc key for Setup menu I have run the following system diagnostics tests, and each one failed with the following message:Startrup Test: Test 1 (quick):..Error:Read failureRun-In Test: Test 1 (Quick):..Error: Read failureHDD Self Test: Test 1 (Quick):..Error: Read failure Can anyone provide advice on how to fix this? thanks

More replies
Answer Match 50.4%

Hello, Here's a problem that just cropped up on mine. Was working fine until out of warranty by a few months. (lease resale Fry's). Arrrgghh. Earlier today it started ok. After a few minutes on battery power the screen went dark,(I'm pretty sure I could still see the shadow of the display, as though it was the backlight out or something. I pulled the battery and did a hard reset. Battery is near new HP OEM. Reinstalled battery. Then--press on button, blue battery light goes on steady for a few seconds then the amber light starts flashing in the background,(blue light still steady) for a couple of seconds, then for about half a second the amber light stays on steady by itself---then it goes out---then nothing. When the power supply is plugged in the blue light is on, but if I press the on button in this case, it has no effect at all.  Any ideas?  I couldn't find this one in the literature.

More replies
Answer Match 50.4%

My HP Elitebook 2570p wont start. I place in the battery and the power button is continously white whereas the charging light is amber and continously blinks. The same happens when AC adapter is connected. Pressing the power button yields nothing. Wont turn ON/OFF

More replies
Answer Match 49.98%

i am looking at installing a dock

my query is..
is one better than the other? or is one more resource hungry than the other? for instance?

would be interested to hear opinions knowledge on the subject so as i can make a more informed choice?

thanks

A:rocket dock or object dock? pros cons?

Hi Billy,

I don't know why, but I've always used ObjectDock and I've been perfectly happy with it. I don't use any dock software now though as I found I wasn't using it enough to make it worthwhile having - it was just annoying me when I wanted to click things towards the bottom of my screen.

They're both free, so I'd suggest trying ObjectDock and if you don't like it, try RocketDock

They both have a wide range of skins/icons available, so in my eyes, they're evenly positioned.

Tom

2 more replies
Answer Match 49.98%

Dear all,

I just received my new Thinkpad X1 Yoga, brand new, with a dock OneLink+

Both are running fine. But it is impossible to start the PC when the dock is connected: The screen freeze at the red square LENOVO display from the Bios, windows 10 pro doesn't start.

I have to disconnect the dock, et relaunch the PC to enable a normal start. After the start, I can reconnect the dock.

I updated all drivers, flashed the bios, latest FW of the dock and even resetted Windows, but without success.

Lenovo support wants to change the laptop (!), it's brand new!

I thought maybe one of the topgun member of this community might have a better idea.

Thanks in advance for any advice.

Elwood

More replies
Answer Match 49.98%

Dear all,

I just received my new Thinkpad X1 Yoga, brand new, with a dock OneLink+

Both are running fine. But it is impossible to start the PC when the dock is connected: The screen freeze at the red square LENOVO display from the Bios, windows 10 pro doesn't start.

I have to disconnect the dock, et relaunch the PC to enable a normal start. After the start, I can reconnect the dock.

I updated all drivers, flashed the bios, latest FW of the dock and even resetted Windows, but without success.

Lenovo support wants to change the laptop (!), it's brand new!

I thought maybe one of the topgun member of this community might have a better idea.

Thanks in advance for any advice.

Elwood

More replies
Answer Match 49.98%

Hello, I have an HP EliteBook 8530p that was doing fine until my boyfriend closed it whille I was in the process of downloading a music program.Now when I cut it on it says Windows failed to start it might be a recent hardware or software change.So it tells me to run start-up repair which I did for 4 days straight with no results.I can pull up all of my installed repair software but I cant get into safe mode and when I did that chk thing it said everytjing was ok except for a code 50.all my lights, fan, and hard drive are working.I bought it refurbished and it was already upgraded from Vista 2 WIN7 home premium.I have tried to get into my BIOS but it keeps asking for a password and I never eveb set one up.It says there are no recovery points or images to restore to and I dont have a Win7 disc but do have the license key on my notebook.Any help would be greatly appreciated as I cant afford any replacements.Thank you.

A:My Elitebook 8530p wont start up windows

What is the license key for, Vista or 7 ?

According to this, it shipped with Vista.

http://h10010.www1.hp.com/wwpc/us/en...310.html?dnr=1

9 more replies
Answer Match 49.98%

I am unable to get the OS to recognize/properly install the drivers for an HP LT4120 snapdragon LTE WWAN card. The driver pack SP75259 sucessfully installs but the driver always show an error within device manager - The device cannot start - code 10

More replies
Answer Match 49.14%

I have a HP Pavilion 13 X2 Model F0A05AVI have two batteries in the unit, one in the tablet section and one in the keyboard/dock section. Recently, I have noticed the batteries do not drain equally (not sure if they should) but when the total battery level hits 50%, the keyboard stops working along with anything else attached to the dock like the touch pad for example. The tablet portion works fine. When I check the battery level it shows the dock/keyboard (battery #1) at 0% or 1% and the tablet battery (Battery #2) at 95-100% or so.  Is there anyway to get the batteries to discharge together and or get the dock/keyboard to take power from the battery in the tablet?

More replies
Answer Match 49.14%

This is a question that I've been wondering for a couple of days. Which is a better program MobyDock, Y'z Dock or Object Dock? Also which one runs faster on low end systems? I've only got 32mb of built in video memory on my comp. I've got winxp... Thanks!
 

More replies
Answer Match 48.72%

Al enige tijd kreeg ik de volgende melding tijdens het opstarten:1720-SMART Hard Drive detects imminent failure (Failing Attribute: 5)Please back up the contents of the hard drive and run HDD Self Test in F10 Setup.F1=Continue F10 BIOS Setup. Geruime tijd met F1 Continue de notebook gebruikt, maar uiteindelijk de Setup in gegaan en de test gedraaid.De System Diagnostics gaf een een error: Unknown failureError: Unknown failure Uiteindelijk op de HP support SIte kwam ik op de oplossing om een update van de Bios te installeren.Bios Revision: 68CAD Ver.F0ABios Date: 11/25/2010 Na een zoekopdracht naar 68CAD kwam ik op een lijst met meerdere Service Packs.UIteindelijk vanuit WIndows 7 de Bios Update uitgevoerd (niet USB Stick) via SP48625 te downloaden en geinstalleerd.Tijdens installatie kreeg ik wel te horen/zien dat de update een verouderde versie was ten opzicht van de geinstalleerde (aanwezige) versie, datum namelijk 04/28/2010. Toch doorgegaan en geinstalleerd en daarna bleef mijn PC hangen met een zwart scherm en geen enkele hardware reacgeerd, kortom geen opstart mogelijkheden vanaf USB, DVD/CD, scherm zwart en geen HP logo oid dat te voorschijn kwam. Via een van de andere ServicePAcks, namelijk SP51149 kwam ik bij de volgende tekst bij kopje 'Fixes'.- Fixes an intermittent issue where the system stops responding (hangs) with a black screen during startup when booting to a Microsoft Windows Operating System. Dit is volgens mij het probleem.Is ... Read more

More replies
Answer Match 45.78%

To back up Dell-Brian B's threads you can find all the available Dell documents for the Dell Dock and Dell Thunderbolt Dock here. 
TB

More replies
Answer Match 44.94%

I want to install miniPCI-E HP UN2400 (vid:03F0  pid:201D) modem in my HP 9470m? Please say me -this wwan card located in WhiteList of HP 9470m? (my bios ver - 68IBD Ver. 62 )

More replies
Answer Match 44.94%

Hi, I recently switched to a 9470m Elitebook folio - but the fan noise is killing me when docked in and standing on the desk near me. Is there any possibility to reduce the noise? Already done:- BIOS update- BIOS setting "fan always on on AC power" deactivated Windows 7 x64 Enterprise Already tried speedfan but it seems that it couln`t detect the fan. thanks

A:Fan noise HP 9470m

Its either a faulty fan or a faulty thermal sensor on the board. You need to call tech support to get a case loged to get the issue resolved.

9 more replies
Answer Match 44.52%

Hello,

I am trying to get my Sigma USB dock and software to recognize the dock and lens. I will try to list as much information as possible.

USB Dock for Nikon
150-600 Contemporary lens
Windows 7 Pro SP1
Intel i5 with 16gb of memory
Verizon DSL (Not Fios)

The Sigma USB Dock allows you to fine tune the focus of the lens at different focal lengths and distances using the Sigma Optimization Pro software. You can adjust the vibration reduction settings as well. The computer needs to be connected to the internet for it to work.

I have tried two different USB Docks (sent the first back).

I sent in the lens and dock together to Sigma at the direction of Sigma after contacting their tech department. The technician tested both together. He could find no problems and found it connected properly to the Windows 7 computer he used. He felt it might be a security issue with my antivirus. I have tried connecting the antivirus disabled with the same results.

Here is what I am experiencing:
After opening up the Sigma Optimization PRO program it asks me to connect the lens to the dock then the dock to the cable then to the computer. When I do the light on the Dock comes on and a popup window appears on the monitor saying "Checking for the latest firmware..." A moment later a window appears saying "Cannot recognize the USB Dock". When I click the CLOSE button it begins checking if the latest firmware for the lens is available then a window appears... Read more

More replies
Answer Match 44.52%

Hi Guys.

I have a fresh image of Windows 7 on my laptop but it will crash frequently when connect to a VPN.

I have only tested this over WIFI and have yet to test over a wired connection.

I have attached the correct file but I think some files may be missing as I can't seem to get the Diagnostics Tool to do a full run through.

Any help would be appreciated

A:BSOD When Using VPN on HP Folio 9470M

Hi BinaryStar0647.

Your BSODs are caused by Sunbelt Personal Firewall driver, a regular BSOD causer which is disconnected from the market from December 2011.

Seeing your files I realized that the drivers are used by some other thing, GFI Software Firewall.

ITEMVALUEName [00000016] GFI Software Firewall NDIS IM Filter MiniportAdapter Type Ethernet 802.3Product Type GFI Software Firewall NDIS IM Filter MiniportPNP Device ID ROOT\SB_SBFWIMCLMP\0000Driver c:\windows\system32\drivers\sbfwim.sys (5.2.51.0, 117.78 KB (120,608 bytes), 15/08/2013 10:37 AM)
And it is the driver that is failing here.

Code:
fffff880`0358c670 fffff880`00df2110Unable to load image \SystemRoot\system32\DRIVERS\SBFWIM.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SBFWIM.sys
*** ERROR: Module load completed but symbols could not be loaded for SBFWIM.sys
SBFWIM+0x1a110
And not alone, but with other components too.

Code:
fffff880`0358c408 fffff880`046aadd3Unable to load image \SystemRoot\system32\drivers\SbFw.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SbFw.sys
*** ERROR: Module load completed but symbols could not be loaded for SbFw.sys
SbFw+0x11dd3
I would suggest you to uninstall GFI Software Firewall.

Let us know the results.

2 more replies
Answer Match 44.1%

How to reset bios password with smc.bin file? I following instructions from HP support but still not success - as far as I undestand I cant enter into mode to let system read smc.bin file - anybody can help with that? After F10 I have been asking for password that is unknow and stop at that point :/ Any help will be welcome.

More replies
Answer Match 44.1%

hi can someone help me please with bios password for my folio 9470m i cant remember it plzz someone help me 

A:Hp folio 9470m Bios Pass

Hi @ARtan-Krasniqi? Welcome to the HP Support forum. Thank you for posting ! Folio is a lovely business class notebook. Most business class notebooks (including yours, Elitebook and Probook, etc...) have better security than consumer class computers. You will have to contact HP Support for business for assistance on removing the password. Here is how >> http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html>> http://www8.hp.com/us/en/contact-hp/business-support.html  HP Business support should be able to send you a customised SMC.bin file and instructions which you can use  to reset the password.  Hope this helps. Let me know if you face any issues.

1 more replies
Answer Match 44.1%

Hello,In my company we have Hp 9470m Laptops.We have noticed some problems regarding the external screen showing some light distortion in a verity of screen types. If I use the DP port it will be O.K but via VGA the problem remains.Using different laptop on the same screen will show a clean picture with no distortion, so the problem is from the HP 9470m.  What can I do?Is this issue is something familiar?Thank you.

More replies
Answer Match 44.1%

i cant install bluetooth driver in hp elitebook folio 9470m in windows 10. i check built in device in BIOS there is no bluetooth device present. is it possible thatFolio 9470m not have bluetooth device in some models ?

A:is it possible thatFolio 9470m not have bluetooth device in ...

@zubair044? Your BT is a combo of your WiFi card. What WiFi card do you have installed??? REO

1 more replies
Answer Match 44.1%

We have 2 x Folio 9470m notebook. 1st has 8GB of memory with the upgraded ram using https://www.skhynix.com/eolproducts.view.do?pronm=DDR3+SDRAM&srnm=HMT451S6AFR8A&rk=20&rc=module  The 2nd only has 4Gb of memory and want to upgrade - I found this other memory cheaper - https://www.skhynix.com/eolproducts.view.do?pronm=DDR3+SDRAM&srnm=HMT351S6CFR8C&rk=20&rc=module  My understanding is the main difference is the what I already have is the Low Power (1.35V vs 1.5V). Does anyone know if Folio 9470m will work with this 1.5V version of the memory? Thanks for your help.

A:PC3 vs PC3L memory for Folio 9470m

From the Service Manual: Two customer-accessible/upgradable memory module slots DDR3 PC3-1600-MHz dual channel support Supports 16384-MB of system RAM in the following configurations: ? 16384-MB (8192-MB×2) ? 8192-MB (8192-MB×1 or 4096×2) The specified memory is 1.5 volt. DDR3L will run at either 1.35 or 1.5 volt but I generally avoid mixing voltages. That is why the DDR3L is working for you and I assume you have 2 of the same in the laptop with 8 gigs.  Can you figure out what is in the 4 gig machine now? I would not mix voltages or density...i.e would not have one module with 8 black blocks and one with 4. Try to match the existing 4 gig module is what I am saying...not the exact brand of memory but the characteristics of it. 

1 more replies
Answer Match 44.1%

HI, I have an EliteBook Folio 9470m running WIN 8.1 Ent 64-bit. I have an issue with the Touchpad not working. I have installed the latest driver (sp66111) from HP Support and as a result only the PointStick and associated buttons work and not the Touchpad. Has anyone experienced this and if so what is the fix please? Incidentally, the Touchpad was working at one stage on this OS and ceased to work afterwards. I have re-stalled the OS from scratch withpout success either. Thanks in advance, Vik

A:Folio 9470m Touchpad Not Working

The touchpad might be turned off.Double tap on left top corner of the touchpad to activate/deactivate the pad.Also goto Control Panel>Mouse>Device Settings> Click on the touchpad/Luxpad>Click settings and check the settings.If this dosnt resolve then reinstall drivers from hp.com or from Recovery Manager.Using Recovery Manager to Restore Software and Drivers:http://support.hp.com/us-en/document/c03430118

5 more replies
Answer Match 43.26%

Hi, I work in tech support for a company and one of our enterprise laptops mysteriously has lost its "tattooed" information.  The user who had this laptop left the company and when we went to wipe it we discovered this issue.  Upon starting the machine the HP splash screen has in red text on the top left of the screen "Manufactoring Program Mode set 1 of 10" after the splash screen a "Product Information not Valid" screen appears.  It reads: Product Information not validThe following product information programmed into the system board is missing or invalidSYSTEM BOARD (00A)Product Name Product Serial NumberProduct SKUProduct FamilySystem Board CT NumberENTER - Continue Startup For more information, please visit: www.hp.com/go/techcenter/startup I know that there is an HP utility tool to "tattoo" this information back onto the machine.  As an enterprise that uses 95% HP equipment (our monitors, mouse, keyboards are the only non-HP equipment) I think that the tech support deserves these types of tools to troubleshoot issues.  Sure the machine boots normally if you hit enter, but it's alarming/scandalous to be presented with that product information not valid screen when powering on a machine.  Bonus points to whoever can provide some reasoning as to how this occurred.

More replies
Answer Match 43.26%

I bought this second hand HP Folio 9470m Elitebook and I am stuck at the BIOS password. I cant install an operating system on it as the secure boot is on and to disable it i need to entyer BIOS. Please help. I havent tried the password as i dont want it to be locked. I can provide the seriel number if required. Thanks heaapsss in advance.

More replies
Answer Match 43.26%

I cant Update My Hp Foilio 9470m Bios Driver he ask me to enter the password i try my adminitrator password but its not working my biomatric sensor not working for troubleshooting biomatric sensor i need to update my bios driver but i cant do this without password  is any one there who help me plzz.....

A:Hp Folio 9470m Bios Password Missing

@Us123 For that model you will need to contact HP and they should be able to send you a customized SMC.bin file which you can use at boot to reset the password.  http://welcome.hp.com/country/w1/en/contact_us.html When talking to the HP rep ask them to escalate your service request. REO

1 more replies
Answer Match 43.26%

Hi all,  I have a quick question. Recently I bought HP Folio 9470m from my friend. It came with HP original charger 18.5V | 3.5A 65W but when I looked under the battery on my laptop it says 19.5V | 2.31A  I google about replacement charger fo Folio 9470m and there is allot of it with 18.5V | 3.5A 65W.  My question is, how can I be sure tahat this is the right charger? If it is not, can this diference in Voltage damage my laptop?  













Solved!

View Solution.

A:Right charger voltage and amperage for HP Folio 9470m

MaxLAB wrote:Hello banhien, thank You for Your fast reply. Product number is: D3Q03AWHi, Thanks. I can see part # from your photo. It is not a right part, no idea what is it:               http://partsurfer.hp.com/Search.aspx?SearchText=608425-002 but this one            http://partsurfer.hp.com/Search.aspx?SearchText=609939-001 is used for more than 200 products and I can't find yours on the list. Regards.

5 more replies
Answer Match 43.26%

I am the owner of a used Elitebook Folio 9470m laptop that I procured from my friend. It is very lightweight laptop, and I really love it.Unfortunately, the laptop came with admin password on the BIOS. I already contacted him, and he has no idea what it is. This was his father laptop, and he also has no idea about it. So, I'm left here with this laptop, but no way to tinker around with the BIOS. Obviously this isn't good!All sources lead me to this area where can I contact HP support to try to solve my problem.  I opened up two cases.  First one, case ID 4779632926 and did not get response. Second, 4779725521 and this is response i got. " I  really apologize for the inconvenience, unfortunately we will not be able to support this case."  I tried to reply to this case with subject <4779725521> and then I received message that case is closed. We are sorry, but we were unable to process your request.

The Case with ID "4779725521" is closed or does not exist and cannot be updated. PLS if there is any chance to solve this, let me know.  I can provide any information you need. Thank you.

More replies
Answer Match 42.84%

hi everyone, i have a trouble with my laptop HP folio 9470m win 7 Pro 64 bit. that's about error BSOD of my laptop . Please help me, thanks so much

Attachment 341519

A:BSOD error Ntoskrnl.exe win 7 Pro 64 bit laptop HP folio 9470m

Please continue on your previous thread.

http://www.sevenforums.com/bsod-help...exe-87f7e.html

1 more replies
Answer Match 42.84%

After having replaced an SSD the system shows a constant power button led on and the charging led is blinking white/orange.I removed the battery and even the clock-battery, with no help.The symptom shows when having the notebook on AC or/and battery. So I am not sure if the battery is dead, or if the notebook itself took some damage.Thanks for your advice. 

More replies
Answer Match 42.84%

card reader in hp folio 947m not work in windows 10 

A:Folio 9470m card reader issue in windows 10

@zubair044? Try installing this. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5271102&swItemId=ob_166654_1&swEnvOid=419... REO

3 more replies
Answer Match 42.84%

Hi everyone, I have a trouble with my laptop HP folio 9470m win 7 pro 64bit . Please help me , thanks so much
 

A:Ntoskrnl.exe cause BSOD laptop HP folio 9470m win 7 pro 64bit

Try testing the hard drive and the memory. To test the hard drive go to Computer and right-click on the C drive, select Properties, tools, check now. Set a disk check on the next start up. Let the check finish. To test the memory go here:
http://www.memtest.org/
Download version 5.01 and burn it to a CD or DVD. Boot the laptop with this disk and run Memtest86 for at least 7 passes. No errors are allowed...
 

1 more replies
Answer Match 42.84%

Anyone with a clue on how to solve this problem

A:hp notebook folio 9470m product information not valid

Can you take a picture of message?




I am an HP employee.

1 more replies
Answer Match 42.84%

Anyone with a clue on how to solve this problem

More replies
Answer Match 42.84%

when I connect the laptop to the power network 220V or the battery laptop switches on itself (without push the power button).How Fix it?

More replies
Answer Match 42.84%

I am experiencing the following issue and hope that someone in the forum as an idea / suggestion. When I have the screen connected via via display port cable with the docking station and I have my laptop docked, I dont get any signal and the screen keeps black. This is independent of the Operating System - I used Windows 7, Windows 8. When my laptop is docked but I attach the display port cable directly to the laptop it works without any problem. I have also realized that with other displays 23'' or 24'' the setup with the docking station works without a problem. So it has to be a cominbination between UltraSlim Docking Station and ZR2740w screen. Any advise what else should be tried?











Solved!
View Solution.

A:HP ZR2740w and HP Folio 9470m / UltraSlim Docking Station

Update:  After calling HP technical support I and being bounced among various clueless offshore tech support reps, I finally landed on the US-based workstation support department.  Justin looked up the problem and identified it as a known issue and is replacing my monitor cable with one that HP says will work.   Also, in the meantime there is a workaround that I had figured out.  If you don't use the displayport port on the ultraslim docking station but pug the cable directly into the computer it works fine.  There is some inconvienence associated with this as you have to plug it in every time you dock and unplug it every time you undock (and of course the cable always falls behind the desk while you are doing this), but it is okay as a solution while I am waiting for the new cable to arrive.  Will update this post after it arrives and report whether it works.

10 more replies
Answer Match 42.84%

I have one of these drive docks (the station 2)

http://194.150.201.35/cnmlifestyle/hdds.htm

I have disk which already has information on. Connecting this disc directly to the motherboard SATA connector allows me to see the disks contents. However connecting the disk via the dock just gives a "removable media" icon, which when clicked says please insert drive.

Drive is a 1TB Samsung HD103UJ if that makes a difference

How do I get the drive to work when docked ?

Any help appreciated
 

More replies
Answer Match 42.42%

Hello, After upgrading from Win7 to Win10, my system got stuck when uninstalling MS Office, and nothing worked anymore (File Explorer etc.). I tried to make a factory reset, which got stuck, too, and no OS would be detected anymore. Then I tried to reinstall Win10 64 bit, which brought be a bit of trouble. I have an HP Folio 9470 with a 320 HDD and a 32 GB (I believe) mSATA. During my Win10 reinstall, I ran into trouble and then deleted all partitions on both drives and reformatted everything because I thought that was the method for a clean reinstall. First, I installed Win10 on the 320 HDD, but my BIOS did not appear to allow this (although harddisk was in the legacy boot options), which the Win10 installer had already warned me about, so I could not boot from my HDD and thus could not start Win10. Next, I reformatted everything and installed Win10 on my mSATA. However, the Win10 installer and later Windows 10 only showed a size of 11GB for the mSATA. The installation itself already took up 11GB and there was no space left for necessary drivers and updates, and Windows 10 malfunctioned. My feeling is that the mSATA was larger than just 11GB, but that a part of it is not shown any more after deleting partitions and reformatting. After multiple reinstalls, I do not know what to do any more. Any idea what how I might get a functioning version of Windows 10 on my HP Folio 9470m? Best regardsFrank

More replies
Answer Match 42.42%

Hello, After upgrading from Win7 to Win10, my system got stuck when uninstalling MS Office, and nothing worked anymore (File Explorer etc.). I tried to make a factory reset, which got stuck, too, and no OS would be detected anymore. Then I tried to reinstall Win10 64 bit, which brought be a bit of trouble. I have an HP Folio 9470 with a 320 HDD and a 32 GB (I believe) mSATA. During my Win10 reinstall, I ran into trouble and then deleted all partitions on both drives and reformatted everything because I thought that was the method for a clean reinstall. First, I installed Win10 on the 320 HDD, but my BIOS did not appear to allow this (although harddisk was in the legacy boot options), which the Win10 installer had already warned me about, so I could not boot from my HDD and thus could not start Win10. Next, I reformatted everything and installed Win10 on my mSATA. However, the Win10 installer and later Windows 10 only showed a size of 11GB for the mSATA. The installation itself already took up 11GB and there was no space left for necessary drivers and updates, and Windows 10 malfunctioned. My feeling is that the mSATA was larger than just 11GB, but that a part of it is not shown any more after deleting partitions and reformatting. After multiple reinstalls, I do not know what to do any more. Any idea what how I might get a functioning version of Windows 10 on my HP Folio 9470m? Best regardsFrank

More replies
Answer Match 42.42%

Hey I cant install driver of bluetooth and mobile broad band for my HP folio 9470m in windows 10 64 bit OS plz help me out i try windows 8.1 drivers but they did not work.

More replies
Answer Match 42%

So i'm using a Folio 9470m at work on a 2013 Ultraslim Docking station with 2 Display Port connectors, but if i attach two screens to those it only displays them as one device and mirrors the image on both screens. Furthermore if i go into the screen and resolution settings, both identify as screen 1, but i can set 3840x1080 instead of 1920x1080 and at that moment the picture will span over both screens as one. The downside to this is that the login screen, windows i open for the first time, they're all gonne appear in the middle where the bezels are, it handles them as one bigger screen and not as 2 screens that extend each other. I need them to be detected as 2 seperate screens, and so far i have had no success. Has anyone experienced this or knows a solution? I really don't want to connect the second screen via VGA. Can the folio handle 2 display port connections on a dock? Is this maybe the cause?

A:Folio 9470m DUAL Display Port on HP 2013 Ultraslim Docking S...

As far as I know the  Folio 9470m doesnt support more then one external display.  I think you can verify this by having a look at the quickspec document for the model.

3 more replies
Answer Match 35.28%

Can anybody help?

A:Looking for this Dock

I belive it is About RocketDock - RocketDock.com
or it could be Stardock ObjectDock

5 more replies
Answer Match 35.28%

Hey all,

I bought a DVD/Network docking station, for my Toshiba Portege 7020ct laptop. I picked it up on ebay for cheap. Problem is, it didn't come with ac adapter, or user manual and utility app. I've been searching endlessly for these items all over the place. I can't find squat... so, I'm wondering if anyone has a dvd docking station, model PA3007U, for Toshiba laptop, and would be willing to share your stuff?
 

A:DVD dock

Did you try contacting the manufacturer?
 

2 more replies
Answer Match 34.86%

I'm wondering if anyone knows of a dock similar to the delldock. I have an alienware, so the delldock is unavailable to me. The feature specifically that I'm looking for that I love about the delldock, is that you can set up categories. You can have an button that, when hovered over, displays whatever short cuts you put into it. For example, you can have an internet button that expands into firefox, iexplorer, and google chrome.

Anybody know of a similar dock that has categories? I've tried rocketdock and objectdock and either can't figure out how to set that up on those, or it's just not available.

Thanks!
 

A:Searching for a dock

Found a solution via another forum.
In case anyone is interested, you can use rocketdock (http://www.rocketdock.com) with this addon:

http://rocketdock.com/addon/docklets/1791
 

1 more replies
Answer Match 34.86%

I installed Rocket Dock in an effort to avoid some UAC prompts. I liked it and was succesful in avoiding UAC prompts. But I could not get it to start on a system boot. I unistalled it. I will probably take another shot at it. So I was going to ask if any one else had a similar problem.

There was an entry in the registry to start it. I put entries in each user start menu. Everything looked fine. I could manually start it. Couldn't figure it out. One thing of note it was not installed on the system disk it was on another disk.

A:Rocket Dock

When first installing RocketDock you won't see it at all. The screens here however are a pictorial on things easy to follow since you will need to open up the settings screen for the various options.

8 more replies
Answer Match 34.86%

pis try it. i have found it better than the rest by far.

A:nexus dock

It seems a little redundant though in addition to the taskbar, but a person who likes macs, this is a good program

2 more replies
Answer Match 34.86%

First post! So if this is breaking any type or rules, please move it to the correct section or just delete it entirely.


I've been clicking around and searching my tail off all morning trying to find out how to install custom dock icons. Can anyone here help me out? I am trying to use the icons located here:

Token by ~brsev on deviantART


If anyone could help me out, it would be greatly appreciated. Thank you.

A:Dock Icons

I don't know which dock you are referring to. I use either RocketDock or ObjectDock and I simply copy the icons to the respective folders in the program's icon folder. I can then use them.

9 more replies
Answer Match 34.86%

when i open my computer then also rocket dock is open .....
i want rocket dock should open only on desktop.......
HELP ME HOW TO Do THAt!!!!

A:Help me for rocket dock ?

Have a look at this,

RocketDock Documentation

4 more replies
Answer Match 34.86%

Hi guys
My friend is not too computer savvy and has finished up installing bubble dock on her machine.
I searched and it looks difficult to remove, she tried system restore but still has problems.
I think her machine really needs a clean install.
Anyone come across bubble dock?

A:bubble dock

Bienvenido al foro, greebal!

Please use the tool Zoek:
Download > Download zoek.exe version 5.0.0.0
When the download shows, and you get the option to save, please do so to the Desktop.

Right-click zoek.exe and select: Run as Administrator (Give it a few seconds to appear.)

If your AntiVirus warns you about the program, either allow Zoek to run, or temporarily disable your AV program.
Info on how to disable your security applications > How To Temporarily Disable Your Anti-virus, Firewall And Anti-malware Programs - Security Mini-Guides

Next, copy / paste the entire script inside the code box below to the input field of Zoek (do not copy the word 'code'):


Code:
standardsearch;
installedprogs;
uninstall-list;
Now...

Close any open windows.

Click the Run script button and wait. It takes a few minutes to run all the script.

When finished, the zoek-results.log is opened in Notepad.
If a reboot is needed the log is opened after the reboot.

The log is also found on the systemdrive, normally C:\

Please post the zoek-results.log in your reply.

7 more replies
Answer Match 34.86%

I have seen before installing win7 there is circle dock or more enhance ments but after i installed win7 i found no circle dock nothin those aal were fake images or what? or the dock is hidden in system? or it is not available in build 7000 i am using?

A:No circle dock

  
Quote: Originally Posted by Kaustubh


I have seen before installing win7 there is circle dock or more enhance ments but after i installed win7 i found no circle dock nothin those aal were fake images or what? or the dock is hidden in system? or it is not available in build 7000 i am using?


Circledock doesn't come with Windows 7, but you can download it free from here,

Download Circle Dock 0.9.2 Alpha Preview 8.2 - Launch your programs from a circular dock. - Softpedia

O, and why don't you get the latest release of Windows 7? Deffinately a great improvement on 7000! (You can download the official Release Candidate, version 7100, from Microsoft for free!) Or download one of the later releases from a torrentsite.

9 more replies
Answer Match 34.86%

Hi
I'm running Object Dock, but there's a problem with window focus not working properly in Windows when the program is running (goes away when I close Object Dock).

Does anyone have a suggestion for some free dock software that will run properly under Win 7 64 bit?

Thanks a heap.

Geoff

A:Dock that works for Win 7 64 bit?

try rocketdock?

9 more replies
Answer Match 34.86%

Okay..hi

First I would like to say last christmas I got a hp computer, and when I first turned it on and all that I had the hp task care and the hp dock..and all that then one day I turned the computer on and went to get the mail, when I came back my computer was black and I moved my hand over the mouse to wake it up, the screen when black and for a minute it was black then when it showed the desktop again the hp dock and advisor was gone from my desktop..how do I get it back?

A:Hp Advisor...dock

Click on start, all programs, click Hewlett packard or HP and click on Hp advisor.

2 more replies
Answer Match 34.86%

ok when my mom got her lab top with win 7 64 bit a dock was preset on the desktop which was at the top of it. I tried to find how to enable it on my computer but can not find it. Anyone know how to enable the dock

A:Win 7 taskbar/Dock

Is it a dell that she has, if so its a dell dock. your best bet would be to go to Rocketdock.com and get yourself that dock. There are icons and many other goodies there. Happy hunting, and if you have questions, just come back and ask!

2 more replies
Answer Match 34.86%

I see several very creative themes for Windows 7 that are sporting the vista top dock.

Where can I find it?

A:Top dock for icons?

Do a Bing or Google search. Not sure what you mean by top dock.

If you mean applications like, "ObjectDock, or Rocket Dock," you can use Bing or Google to get a web site. Both the for mentioned are free ware and are easy to use and setup. And, can be a nice addition to your desktop. Used ObjectDock until Win 7. With the new superbar there has been no reason for me to use a docking program.

Hope this helps.

3 more replies
Answer Match 34.86%

I don't know if someone has already posted this, it has been out for a while.

Circle Dock

Although the website looks like crap (in my opinion) the program is great (also in my opinion).

and there is also Gizmo Toolbar... but, I havn't tried that... yet.

My desktop with Circle Dock:

A:Circle Dock!

  
Quote: Originally Posted by CoolioG


I don't know if someone has already posted this, it has been out for a while.

Circle Dock

Although the website looks like crap (in my opinion) the program is great (also in my opinion).

and there is also Gizmo Toolbar... but, I havn't tried that... yet.

My desktop with Circle Dock:


CoolioG,

Were did you find that clock with the date??

I kinda like it...

Thanks..

7 more replies
Answer Match 34.86%

I have my HP Elitebook 840 G3 plugged into a slim docking station. Every 5 minutes orso one of the 2 monitors i have connected via the coking station will black out for 5-10 seconds. Are there drivers i am missing?

More replies
Answer Match 34.86%

HP ZBook Dock with Thunderbolt 3 usb device issues. USB Keyboard randomly sends a stream of a repeated character.  I will be typing and mid worrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr d will get results like in the word above.  The inverse happens alot too, were it just drops a few characters i have typed. USB Mouse lag is horrible. Both devices will stop functioning, need to reboot the dock to recover them. Any one have any suggestions or which drivers are the most stable?

A:thunderbolt dock

#HPExpertDayYou will have to update BIOS/Firmware if any. Install the docking station drivers. Try using a different keyboard, if the issue stops then issue was with keyboard.http://support.hp.com/us-en/document/bph07165

5 more replies
Answer Match 34.86%

Are there any good references for the differences between the ultra vs pro docks? I'm trying to decide which to get and wondering if either supports a VGA output. Thanks..

More replies
Answer Match 34.86%

For some reason my dock won't load when I log in to my desktop. It won't even let me send an error report to dell. Any help?

A:Dock problem

Here is the answer given by Dell Forums. It is for Vista, but it should be enough to give you the lead that you need to correct your problem. Feel free to use our services any time that you have the need. The entire membership will be available to help you.

Dell Dock Won't Run - DELL COMMUNITY

8 more replies
Answer Match 34.86%

I downloaded circledock.... damn thing won't work It's version 0.9.2Alpha8.2. As soon as I click it it disappears and can't be executed again without a reboot (in which case it disappears again once clicked). Ran it in compatibility mode to no avail.

Anyone else have problems with this or know of a fix?

A:Circle dock

Just downlaoded it,no problems with mine.
Try to re-download it-extract to my documents-click on the .exe file
Circle Dock: Download Circle Dock

7 more replies
Answer Match 34.86%

Hello, Installed windows 7 Ultimate a couple of days ago and I want to know everthing about it

Is there some sort of ap that comes with 7 like say....I rocket dock..Not that actual app as I wanted to know if one CAME with Windows 7

If not, got a link to top dock?

A:Flash dock?

Hi,

There is no in-built dock application so to speak, so lost of people use ObjectDock.

Regards,
Golden

5 more replies
Answer Match 34.86%

Hello folks,
Currently I have a E7470 mounted in an E-Port Plus docking station. This dock is then connected to one monitor via VGA and another via DVI. Problem is the monitor connected via DVI won't display anything and doesn't seem to register within Windows that anything is connected. I managed to get this working for about 30 minutes yesterday, but after powering my laptop back on this morning I was back to one monitor. 
I read the E-Port Plus user guide and this seems like a supported configuration:
http://downloads.dell.com/manuals/all-products/esuprt_electronics/esuprt_docking_stations/e-prt-pls_user%27s%20guide_en-us.pdf 
Laptop is running Windows 7 Professional 64-bit 
Any thoughts?

More replies
Answer Match 34.86%

I have just purchased a HDD sata media player dock which I am using a Samsung 1000gig HDD in. I have copied some of my movies into folders using A, B, C etc up to H as an easy way to find them. The movies are playable in A to F folders but in the G & H folders the movie headings are there but the next folder to come says Root and there are no files to play in those folders. When I connect back to my computer the files are there. I have tried copying them back in a couple of times but it is still the same. I shifted the movies into folders named 1G & 1H but then the movie in the last folders of E & F become unplayable.

If someone could help that would be great.

Thanks
 

A:HDD media dock

Is the hard drive formatted NTFS?

Make and Model of media dock?
 

3 more replies
Answer Match 34.86%

I am in Spain at the moment and somehow i have downloaded a prog, called Bubble Dock, i have tried to get rid of it in the uninstall feature but nothing has happened, and of course the prog itself is in Spanish. Can anyone help please. thanks.

A:bubble dock

Hello bobbies.. Lets see if we can get t with these..I moved this to the Am I Infected forum.What is your Browser?Please download MiniToolBox, save it to your desktop and run it.Checkmark the following checkboxes:Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory size.Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run.Note: When using "Reset FF Proxy Settings" option Firefox should be closed...ADW CleanerPlease download AdwCleaner by Xplode and save to your Desktop.Double-click on AdwCleaner.exe to run the tool.Vista/Windows 7/8 users right-click and select Run As Administrator.Click on the Scan button.AdwCleaner will begin...be patient as the scan may take some time to complete.After the scan has finished, click on the Report button...a logfile (AdwCleaner[R0].txt) will open in Notepad for review.After reviewing the log, click on the Clean button.Press OK when asked to close all programs and follow the onscreen prompts.Press OK again to allow AdwCleaner to restart the computer and complete the removal process.After rebooting, a logfile report (AdwCleaner[S0].txt) will open automatically.Copy and paste the contents of that logfile in your next reply.A copy of all logfiles are saved in the C:\AdwCleaner folder which ... Read more

1 more replies
Answer Match 34.86%

hey sevenforums,

soon i will be getting some new green drives for backups because my old one is almost full anyway im not sure which would be a better option..

1. buy a Vantec Nexstar Dual SATA Hard Drive Dock (USB3.0) and then store the drives in a anti static bag or plastic case when not in use

2. buy a Vantec NexStar 3.5'' USB 3.0 Enclosure NST-380S3 for better protection and cooling

at the moment i only need 1 external green drive but i will add more in the future

would it be worth adding a product like this for some kind of cooling to the dock or no point because it wont be accessed for very long?

Arctic Cooling Arctic Breeze USB Desktop Fan
Arctic Cooling Arctic Breeze USB Desktop Fan [AC-BREEZE] - $19.00 : PC Case Gear

ive read mixed opinions about the older dock models but some good ones about the usb 3.0 model

would anything bad happen to the drive because it pops up like a toaster or is it perfectly safe? lol

thanks

A:Dock Vs Enclosure

It's mostly a personal preference I would think. Since your stating your not going to be using the drive for any length of time cooling shouldn't be an issue.

When I have the funds I'm going to go the way of the dock since it can be used with either a 3.5 or a 2.5 inch drive and some can be hot swapped. Just is a more versatile usage situation.
JMO Fabe

9 more replies
Answer Match 34.86%

Any body have suggestions on an external dock. Self powered with a sata connection. The ones I have been buying are lasting less than a year. If you box it up and ship it back, you have almost the price of a new one. I want one that the disk is easily unplugged and a different disk can be inserted.

A:External Dock

I am using a Rosewill RX-DUS100 I got from New Egg. It's working OK so far, but I only use it every couple of months, so I can't speak to it's longevity.

It does have eSATA and USB 2.0.

Not sure what you mean by self powered.

Another alternative is a bare cable--no dock. I've seen the cables for $10 and it might be more durable. You just lay the hard drive on a table top and connect the cable to it.

8 more replies
Answer Match 34.86%

Two and a half years ago I did a thread on external hard drives (HDs)

http://www.sevenforums.com/hardware-...ard-drive.html

Brand name external HDs have become very common nowadays. You just buy 'em & connect 'em & use 'em.

But for some of the newer members/users, I thought maybe they might like to know about some of the other devices that are available when working with extra HDs.

Hard Drive Dock

There are two different kinds of HD docks, internal and external.
They basically do the same function but in slightly different ways.

The internal is just a shell that fits in a drive bay to allow easier access.
It has some adapter connections that allow it to connect to the motherboard
inside the computer.

An external dock can hold the drive in an enclosure or an open exposed
cradle like unit. These units have some small circuit boards inside that help
with the electronics needed for the external connection. The connection can
be USB or eSATA. They all have an external power source.

There are units that are for the older IDE type HDs & for SATA HDs.
There are units that can fit a desktop HD or a laptop HD.
There are units that can hold two (2) HDs at the same time for data
transferring.
There are even some combo units that can handle IDE & SATA at the
same time.
I even found one that holds 2 SATA HDs and one IDE HD at the same time,
plus has 2 additional USB ports & some card reader ports.

******************************************... Read more

A:Show us your Dock

I have this one SYBAUSA - CL-ENC50038 >> Dual Mode: SATA III HDD Duplicator + Docking Station with SuperSpeed USB 3.0 Interface and works great.

3 more replies
Answer Match 34.86%

Hi there. So I have a 3 old hdd's kicking around here and before I throw them out, Im wondering about a dock for at least the hitachi

Maxtor DiamondMax Plus 9 - 80G ATA/133 - Loaded with music and would like to get that off.

Hitachi Deskstar-164.7G- ATA/IDE

And, a real oldie:
Quantun Fireball Plus AS- 40G -AT

Any suggestions on Vantec or Thermaltake, or whatever will work if I can scoop one cheap.
I have other externals but before throwing these out might be worth a shot to try a dock.
thanks

A:HDD Dock advice please

I use a TT docking station and I like it very much. No external enclosure case to open up. Just slide the drive in and go.

BTW, you are wise to want to clear these drives before discarding them. If you have CCleaner, it has a wipe drive feature that will wipe (overwrite the entire drive with random 1s and 0s) these drives of all the old data.

That said, some docking stations are for SATA only, so if looking at ATA, make sure you get the right one. However, since this is just a one time action, it might be easier to just temporarily attach these drives to a secondary drive location in your current computer, then wipe them - instead of buying a docking station for the obsolete drive interface you may never see again.

5 more replies
Answer Match 34.86%

Hi i use Object Dock on my computer , i found a link to a site that has a nifty application called Stacks Docklet it's at aqua-soft.org it comes in zip form but when i try and install it something prevents me from installing just wondering if anybody has seen it and managed to get it to work ?

Cheers Dave

A:Object Dock

Hi this chap explains YouTube - Stack Docklet Tutorial (how to install and use)

Cheers Dave

1 more replies
Answer Match 34.86%

Interesting app but says it won't run on Vista 64, Does anyone know if there is something similar that will? My desktop looks like my closet...not pretty. Thanks so much
 

A:Rocket Dock

Why would you want it to run on Vista 64? Vista has it's own sidebar?
 

2 more replies
Answer Match 34.86%

For some reason the "dock," or "ribbon" along the top of the screen, a feature of Windows 7 I have come to like, has simply disappeared. I tried turning the machine off and waiting to restart. No luck. Any suggestions?? Thanks.

A:Disappearing Dock

Ribbon interface is supported only in certain programs in Windows 7 (Wordpad, Paint etc.) and in stand along programs like Microsoft Office.

Please specify what application are we talking about here? And please post a screenshot of this issue.

4 more replies