Tech Problem Aggregator

E6510 problem reboot and bios update problem

Q: E6510 problem reboot and bios update problem

I have a E6510 notebook . I have a problem to update the bios . Because the notebook has a problem in the POST phase . In fact, if I access the cold pc post BIOS is slow but it works . Instead reboot ( control-alt-delete ) hangs with a flashing light. No other problems . I wanted to try to update the bios from A5 to A9 . but the update is a -executable file that performs the first phase but remains stuck in the reboot . P.S. I do not know other ways of updating and still can not seem to extract the bios files from executable
GRazie

More replies
Answer Match 84%

I need to update my new Latitude E6510 to BIOS patch A01.1. When I run the updater it starts, reboots the laptop but nothing happens. The BIOS is still on A01.  I cannot run the A02 BIOS. Why doesn't this work? Is there a way to make the patch work. 
NOTE: I am sure this is the correct file. Used my service tag to choose downloads.

A:E6510 - Cannot update BIOS

BIOS A03 fixes this problem. Can now update BIOS from Windows 7 64 Bit.

14 more replies
Answer Match 81.9%

I tried to update the BIOS of my Latitude E6510 (Win7/64bit/8GB RAM) from A05 to A16. It did not go. Then, tried updating from A05 to A09, it did not go either. Is there a way to go from A05 to A16? Please help? Thanks.

A:Latitude E6510 BIOS Update Question

Define what you mean by didn't go. Was there an error message?

18 more replies
Answer Match 69.3%

hi everyone

here is my problem, i got a new mobo, cpu, ram and video card. I'm using a hard drive from a old system that already has a os (windows xp) installed on it. When i power up my pc everything boots up to where i guess the drivers load and the windows last config-safe mod-safe mod with command prompt menu comes up. No matter what i pick it just shows my video card name and info then restarts. I'm pretty sure its not the video card because i tryed a old card (pci x16) and the same thing happend. I'm kinda stumped at the moment so any help would be apreciated. Thank you in advance.
 

A:bios reboot problem

you need to reinstall windows in order to run it with the new hardware. a re-installation is necessary any time you replace your motherboard with a different one or one with a different chip set.
 

3 more replies
Answer Match 66.36%

I can't get the new A09 BIOS to install. It seems to extract fine, but then it crashes before it starts the update. I've tried Win7 32 and 64 bit, both SP1.
Anyone else have that issue?

A:E6510 BIOS A09 won't install

Thanks for the reply posting!  
I've looked at a number of methods for creating a USB bootable drive and they're all pretty convoluted.  This was easy to follow but the only problem is that the site you provide for getting the HP utility requires some authentication so that was a dead end for me.  
However I took your advice, Googled it up and came across an even simpler recipe:  www.bay-wolf.com/usbmemstick.htm.  I followed this, created the USB boot drive and *successfully* loaded the new BIOS.  
Note: I did reorder the boot sequence of drives in the original BIOS before starting so it found the USB boot before the HDD boot.   Remember to reset this order after the update.  en.community.dell.com/.../19883243.aspx

13 more replies
Answer Match 66.36%

is there a jumper to reset bois back to factor default don't have master password

More replies
Answer Match 65.94%

Made the huge mistake of updating BIOS. Had small MOBO usb prob, and for some reason thought a BIOS update would do something. Wasn't too worried because Gigabyte touts Dual BIOS pretty strong.

Anyway, tried updating BIOS, then system would not boot, so the Backup BIOS didn't kick in. btw, the MOBO is a Gigabyte GA-K8N Pro.

So I copied the backup bios to a floppy and used the floppy to fix the main bios. OK, now computer would boot, but would freeze up after the desktop icons appear. Actually would sometimes work for a few minutes, but always froze up.

Boots OK to safe mode, even to the point of getting online, so I downloaded the old bios from Gigabyte, put them on floppy and used that to update the main bios. Same result.

Also did a system restore from XP Pro Safe Mode (because XP wrongly states that this can be undone; didn't find out that System Restore done from safe mode cannot be undone until I tried to undo!).

My tech support (ABS Computer; they rule) thinks that the BIOS is now fine, that some windows files are corrupt and a re-install will fix problem and mobo is probably fine as well. I'll buy that.

anyone have any miracle suggestions before i re-install? Is a repair install worth a shot? Really not looking forward to re-installing all my software and putting all my data back where it belongs to get my email hist., bookmarks, etc. back.

thanks - I will now write the following 500 times: LEAVE THE BIOS ALONE! even with Dual BIOS
 

More replies
Answer Match 62.16%

Hi, sorry I do not speak English! The problem after BIOS update (80.07 -> 80.13)! Now on the screen Press the ESC key for Startup Menu, but the keys on the keyboard does not work! Computer hangs on this screen. Where can I download version 80.07 BIOS and how to recover it? I did not find the support pages for the Pavilion 500-122erm. I need to create a USB flash drive! Thank you!

More replies
Answer Match 62.16%

Well guys im new to the forum but i have read alot on here and im positive some of you can help me out... well here is my problem:

I decided to update my bios so i went to the Intel Site (http://developer.intel.com/design/motherbd/rl/rl_bios.htm) and got the bios update for my motherboard. After this i double clicked the .exe and it ran as it should, when it restarted it gave me a series of beeps (normal) then it went to a screen that read "reboot and select proper boot device or insert boot media in selected boot device" so i tried restarting and going into the bios and i went to boot priority, all it showed was my floppy drive and my CD-RW drive, no Hard drive detected. so I decided to try reinstalling windows and the windows setup detected my Hard drive and i went to install and it went to the screen that read press enter to install windows, press F8 to agree, etc, etc, the setup continued and it formated the drive, then it went to "setup is loading files" after that finished it said "setup will now reboot and then continue installation" it would reboot and then go back to the screen that read "press enter to install windows" now im at a point where i have no idea what to do so.... if any of you have any suggestions it would be greatly aprecciated.

Thanks for reading,
Lupus6
 

A:Problem after Bios Update

May be you accidently pressed "enter", the second time computer rebooted.
 

6 more replies
Answer Match 62.16%

Hi,

I did a BIOS update on an ASUS M2V.
I have been having problems with Windows 7. According to the (release note) there were some compatibility fixes added for Vista. (yep, for Vista, but I think they're also neccessarry for Windows 7)

The main problems I had was related to sound. It seems to be a common problem with this MB and Win7. See here as it's discussed on Microsoft's official forums, they're suggesting a BIOS update

I didn't have a floppy drive so I had to find a workaround. I found a bootable CD (link here) that included the latest BIOS version. It's a DOS based CD which starts the update when I type "UPDATE" and press enter. It did the trick. According to the screen messages, it successfully reflashed the BIOS and it asked me to reboot.

Computer was working but Windows started to have problems. I had problems with logging off and switching it off. It would just hang on the shutdown screen.
I could log in but it won't open any of my programs (like Chrome, Word etc...). Not even regedit.
I entered safe mode which was working fine.
I tried reinstalling Windows. From DVD, it hangs on "Extracting Windows files". It did not move from 0% for 20 minutes. I couldn't hear the DVD spinning noise and the LED on the drive wasn't blinking as expected.

From USB, it just stops. I started it and moved to 1% then I left it. When I came back to the computer I could only see the setup background. No cursor on the screen and the keyboard wasn't respond... Read more

A:Problem after BIOS update

Go to Asus website, look up your motherboard, click the Downloads tab at the bottom, use the auto update Bios tool. no need to boot to anything.

9 more replies
Answer Match 62.16%

I’m using a socket A jetway (v6du) motherboard and I want to update my bios so I can use a sempron cpu. I’ve tried to use the software that comes with that board so called “ magic bios” bios live update utility. But unfortunately it says theres no later update of the bios that you are currently using. So I tried to visit their site but I just found only one file corresponding to my motherboard model. A file named V6DUA03.bin which has a date of 10-06-03. and its description is “update cpu name string”. I’ve downloaded this file but I don’t know how to use it. Its already in my downloads folder but I cant open it coz its has a .bin extension. I need your help thanks in advance….
 

A:Bios update problem

G'day step22, normally there is a ritual procedure where you have a bootable floppy like a W98 type dos. You unzip the new bios as needed and copy it to the floppy, keeping careful note of the file name.
You also need the actual utility to suit your current BIOS brand and also copy it to the floppy..
When you boot to that special floppy, working from the DOS prompt using "dir" you will see the files.
This procedure is usually explained in detail and with diagrams by the board manufacturer, the BIOS update must be absolutely correct for the board you have and you must use the proper utility to install it. Ensure you save the old bios, this is usually part of the procedure with the install utility.
The utility is normally available from the same place where you get the BIOS update.
This is a "one chance to get it right" procedure so ensure you follow the destructions to the letter. Some boards may have alternate install methods but this is the fundamental method.
Cheers, qldit.
 

3 more replies
Answer Match 62.16%

I updated my bios with Asus' bios update utility, at first everything worked fine. Including the required reboot. The next day when tried I booted up I got an error message saying the processor is set at the wrong speed. No matter what speed I set the message reappeared. Can anyone help? Thanks
 

A:Bios Update problem

Try entering BIOS and reset to defaults . .
 

3 more replies
Answer Match 62.16%

I need to update my 14z 5423 but when i run the 5423A13.exe (Bios updater) my pc freezes. What can i do?

before you ask, i really need to update the bios.

Thank you

More replies
Answer Match 62.16%

Dear HP Support Team and everyone I tried to update bios from HP Support Assistance for several time but it failed everytime and always show this dialog box. What does it mean and what should I do next from now to complete my bios update, thank you very much.

More replies
Answer Match 62.16%

Originally my computer started to repeatedly restart its self when turned on. I brought it to best buy and they could get no output at all from the computer. they said it was probably a motherboard problem. I purchased a new motherboard, new ram, and a new CPU. i added those to my other items. right now i have the following

MOBO- ECS Elite Group P4M900T-M (intel pentium dual core compliant)
CPU- Intel pentium dual core
Ram- Kingston 2, 1 gig sticks of 667 ddr2 ram
Video- Nvidia Ge Force
Sound- Soundblaster Audigy
HD- Maxtor 200 Gig

The computer no longer just restarts repeatedly when turned on. It runs it POST, and the BIOS settings are adjustable and responsive. however when the computer hits the windows loading screen, the screen shows up, the bar at the bottom does not show any movement, it flashes a quick blue screen to fast to read, and then restarts.

this is what i have tried-

Memtest both sticks test fine.
HD test, tested fine.
built on table. no change
rebuilt and checked all connections again, no change
put in old cpu, (pentium 4) and it started doing the exact same thing it originally did. fast restarts. So it wasnt a motherboard problem i had it was the CPU. the old motherboard does not support the new pentium dual core chip i have.
I put the new chip back in and this secondary problem was still there, restarts only on windows load screen.
I am trying to update the BIOS because it is the only thing left i can think of.

Now the n... Read more

A:BIOS update problem

Your power supply may have gone bad... The hard drives contents may have been corrupted by the power supply problem. Replace the power supply and reload Windows
 

6 more replies
Answer Match 62.16%

Hello all. I'm having a serious problem and hope someone can help.
Have a one week old system. Have been tweaking it all week, a bit at a time, in hopes of getting it to run more smoothly.

HP a6750f, came loaded with WinVista Home Premium 64-bit. 8GB RAM, etc., it is fast but "hangs" a lot. I had just about gotten through the Tutorials - Vista Forums with only minimal success as of yesterday. Last issue.... to check the BIOS. I checked the BIOS, although forgot to write down what is WAS. The HP website listed a new BIOS for this unit as of 26-Jan-09 so I downloaded it. It is/was MS7548.

Before doing anything else I made a new restore point, not that it helps me now.
The BIOS update was an .exe file which had to be clicked on from within Windows, which I did. The system rebooted and came up with a screen that noted "scanning drives". Figured it was a good time to walk away. Twelve hours later, same screen. Tried rebooting a variety of ways with no success. I have a boot repair disk (via neosmart.net) and it doesn't help because the system doesn't get that far.

Here's what it does do:
Reboots; the blue HP screen comes up with four options F10, F9, F11, and esc. Have tried them all. All momentarily display a screen that lists the L2, L3 cache sizes, and the drives. (All appear to be there). There is one error message printed but no repair options.
" Default BIOS settings have been loaded due to BIOS update or checksum error.&q... Read more

A:BIOS update problem

Hello heiyah,

I too experienced the same problem with an HP, probably with the exact same update.

Model #: M9500f
Motherboard: MS-7548
OS: Vista 64-bit

updates located at: Select software and drivers*

Actual bios update that clobbered my bios : ftp://ftp.hp.com/pub/softlib/softwar...-1/sp41004.exe

I tried various ways to reset the bios back to default settings, but to no avail.

I chatted online with HP, and they let me know that I should never do bios updates unless a machine is having major problems (basically saying I caused my own problem), and we (HP and me) were not able to resolve my problem over the phone. I routinely do many, many bios updates with Dells on campus, and have never had a problem. When doing a software upgrade, it is common practice to do firmware and bios updates to hardware. I won't do that in the future with HP drivers, based on my online chat.

In the end, since the machine is under warranty, and HP is going to pick the machine up and send it to a service center to repair it. Contact HP and let them know about the problem and that others have had this same issue.

I have attached screen prints of my issue.

Good Luck!

6 more replies
Answer Match 62.16%

i have a HP computer with a A7N8X-LA mobo and i downloaded a BIOS upgrade for it at hp.com and now when i start my computer it is just black. i called hp support but since my computer is 2 years old they wont help me unless i pay $75 even though there website said it was a critical update. i want to know if there is a way i can fix this by myself before so i dont have to pay them.
 

A:Bios update problem

As with any decent flashing (is that possible? ) you should have made a backup of the current BIOS. Load that back up.
 

3 more replies
Answer Match 62.16%

Sigh. I used Intel Express BIOS to update my Intel D850EMVRL M/B. During the process, the computer hung before rebooting. Per their instructions, I hit the reset switch (although I guess I should have powered off completely).

Now, when the computer boots, it brings up the M/B indentifier (with the serial of the new BIOS) along with the "press F2 for SETUP, F12 for network boot" stuff at the bottom. However, that's as far as I get. I can't enter setup or do anything else.

Am I hosed here? Any suggestions would be much appreciated.

Thanks,
Dan
 

A:BIOS update problem...

Sounds like you messed up. I don't recommend using those BIOS updater things. Many people have had problems with them and as result ruined the BIOS. You can try flashing using the floppy method, but I wouldn't hold my breath.
 

9 more replies
Answer Match 62.16%

Hello!

Solution: Reflashed to 10.08 with the drive in. Still not booting.

Reflashed again, using a different key- BOOTED!

W00T!

Thanks for the assist. Marked Solved.

Solution: Ensure usb key formatted to Fat32, format it again, don't flash bios unless you actually need to, and most of all- with this particular board and multiple hard drives, do not update bios to 10.10.

I've had this issue with the "Reboot and Select Proper..." since I did a bios update (cause I'm an idiot.) to 10.10 on my Z77A-GD65 board. Until the update, I had no issues booting.

Previous bios unknown (cause I'm an idiot).

Primary Drive (Sata 3 Intel Port) - 128GB Kingston SSD (Windows 8)
Secondary Drive (Sata 3 Intel Port) - 120 GB Kingston SSD (OSX 10.8.3)
Tertiary Drives: Seagate 1TB (D drive, Problem drive) Port 3 - Sata 2
Seagate 1TB (OSX storage) - Sata 2
Seagate 500GB (OSX backup) - Sata 2

I've checked (and then replaced) connectors, power lines (modular P/S). The system _will_ boot with the secondary (D drive) disconnected and I have hotswap enabled, so I've found a workaround in that I ground myself off on the case and when the Win Logo shows up, I reconnect the drive. The issue with that (other than my fat-a$$ climbing under a desk each time to disconnect and reconnect a drive) is that my case is open and this is an "always on" (I travel and stream to my iPad) PC, so sometimes BitDefender, Windows Update or "Other" force a reboot where my drive is connecte... Read more

A:Reboot and Select.. After bios update

I have a 1 TB Seagate drive that if connected to my system, fouls up the whole thing. But there is nothing wrong with it, it simply interferes with the rest of my Seagate Drives.

I tried everything, replacing power and Data cables, even bought an expensive Data line, to noah vail.

Finally I gave up and just stuck it into an External Box.

There might be a power issue with your PSU, maybe it is one too many HDs for it to handle and that HD is breaking the camel's back.

Dont give up, just try different Data cables and buy a good Power Connector.

When all drives are connected, which drives does it detect, also, with the two OSX drives disabled, will it detect and boot?

Try moving the drives around on the SATA bus as well, I've had to do all kinds of finicky things to get my system to find and use all of my drives.

16 more replies
Answer Match 62.16%

My HP notebook 15, I thought needed BIOS updates. So I tried to update, failed when restarting. Needed to do recovery and manufacturing settings. Tried to back up files not excepting any of my flash drives. Something about NFTS formatting appears. Tried calling HP. No help. Ran system test and tried to repudate BIOS. Looks like it was already up to date.

More replies
Answer Match 61.74%

Hello,I recently bought the pavilion x2 12 detachable b003tu. I was having a strange problem. When I fully charged the device, the battery reduced directly from 100% to 93% without the anything in between. I contacted Hp technical support. They gave me some intel driver updates and BIOS update. After doing that the battery issue was not resolved. However the battery backup drastically reduced by 2 hours. I did a factory reset and updated to my previous BIOS but the issue was not resolved.Now I am having another problem apart from the battery issue. Usually Microsoft downloads updates when the Battery Saver option is turned off. My battery saver option is turned off but then also when I open the Update page it says "Battery Saver option is turned on" and will update after the mode is turned off. The same message is displayed even when I plug in the power adapter. Hence Microsoft is unable to download any updates. Pls help.

More replies
Answer Match 61.74%

I have lenovo G50-80 and i was having issue related to my Intel HD 5500 Graphics Card. when i install graphics card driver it start flickering and i can't play videos or games. To solve this problem I download all drivers from levono website and after installing BIOS file, when it showed current verison and installing version I canceled the BIOS update. I shutdown my laptop and when I press start button, the power led on for 2 seconds and then powered off again.  please guide me how to recover updates on my lenovo G50-80 without windows and without any access to other laptop. The Display screenshot for graphics card problem is attached here with.  

























1.png ?289 KB

More replies
Answer Match 61.74%

Well guys im new to the forum but i have read alot on here and im positive some of you can help me out... well here is my problem:

I decided to update my bios on my mother board (Intel D865PERL) so i went to the Intel Site and got the bios update for my motherboard. After this i double clicked the .exe and it ran as it should, when it restarted it gave me a series of beeps (normal) then it went to a screen that read "reboot and select proper boot device or insert boot media in selected boot device" so i tried restarting and going into the bios and i went to boot priority, all it showed was my floppy drive and my CD-RW drive, no Hard drive detected. so I decided to try reinstalling windows and the windows setup detected my Hard drive and i went to install and it went to the screen that read press enter to install windows, press F8 to agree, etc, etc, the setup continued and it formated the drive, then it went to "setup is loading files" after that finished it said "setup will now reboot and then continue installation" it would reboot and then go back to the screen that read "press enter to install windows", ive even reset my CMOS and it didnt help at all... now im at a point where i have no idea what to do so.... if any of you have any suggestions it would be greatly aprecciated.

Thanks for reading,
Lupus6
 

A:Solved: problem after bios update

16 more replies
Answer Match 61.74%

On August 27, 2015, I got a notice from Dell Update that there was a new version of the BIOS for my computer (a Dell Inspiron 15 laptop). My computer was out of warranty at that time, so I appreciated the notice, thinking Dell was good to update the BIOS. However, the update has proven to be a disaster.
Whenever the computer is idle for more than a half hour, it goes to blue screen and says it has encountered a problem and needs to restart. The error is called "kernel data inpage (sic) error." I first tried Dell Support, but they absolutely refused to do anything to fix it, because it is out of warranty. They told me to go back to a point before the update. No matter how much I argued that they had caused the problem, they still refused to fix it and would not help me regress the computer to an earlier time (I don't know how to do it)
I I have found out since that the Intel Rapid Storage Technology Driver is missing and, according to Microsoft, is causing the problem I am having. I need Dell's help to replace that (so I choose the right version). But, now, Dell Detect won't run on my computer, and I can't find anything on the web site to tell me which one is right. Also, I am shut out of Dell chat and there is a multihour waited for phone support.
Before this happened I was ready to be a Dell customer for life. Now I feel like I'm being told to go away.
Has anyone else had an issue with this BIOS update?

A:BIOS update causes major problem

You may have malware on your PC.

9 more replies
Answer Match 61.74%

Hello,i'm using f1 - f12 keys very often so i decided to update my bios. My actual version is V1.05 and i download new version from lenovo page: http://support.lenovo.com/pl/pl/downloads/ds036474 When i want to instal, program shows my version of bios and version that would be instaled. But after 2 seconds it shows me window with message:  BIOS is not for your Notebook PC. Anyone knows how to update my bios in this case? 











Solved!
Go to Solution.

A:G500s BIOS update problem

have same issue here,  its stopping kaspersky from stopping screen shot software/virus. installed win 7 on a new hdd to try, same result. Also should add im a computer tech 13 years experince so... Lenovo???

4 more replies
Answer Match 61.74%

I have an ASUS P5E mobo. When I set it all up, I flashed the bios from 0203 to 0502 and a few programs that came with the board ceased to function anymore. The AI suite in particular and also Smart Doctor. I was planning to use AI to O/C but one thing that 0502 had that 0203 didn't was all the increments for uping all the params. Does anybody know if 0501 has those settings, and if AI and SD work in this bios version or should I just go back to 0203.

Thanks
Robert
 

More replies
Answer Match 61.74%

My motherboard is ASUS P4BP-MX 2.0...


I tried to install Windows XP professional (SP2) on my PC..formatting and copying of files done successfully..
After restarting, my PC hanged in Windows XP logo screen itself..
I have previously used the same cd and installed XP successfully in my friend machine recently..so no problem with CD..
so to troubleshoot i installed Ubuntu 8.10..it worked successfully..
am able to boot and work in Ubuntu 8.10...

I thought of upgrading my BIOS 1003 to version 1005 and downloaded 1005.BIN for XP..

1) Does upgrading my BIOS fix this XP installation issue?

While trying to upgrade i went through my board manual and pressed Alt+F2 key after POST screen..
I got the AwardBIOS Flash Utility for ASUS v1.00 screen..
The screen had File Name to Program field but my cursor is being shown at some other place near the Message grid..
Also its not accepting any input from keyboard..
I tried Fail Safe defaults, Optimised defaults..but no success to enter file name in AwardBIOS..

2) Does resetting my RTC CLEAR jumper alone by unplugging power cord and removing CMOS battery fix this problem?

3) If i somehow get access to AwardBIOS utility in feature with some fix, is that possible to Update my BIOS with FAT32 formatted USB pen drive having my 1005.BIN in AwardBIOS utility?

A:BIOS update and XP installation problem

Here's a thought.

Install VirtualBox on your Ubuntu partition, and then try and install Windows XP in Virtual Box.

Does it work, or hang at the same place?

2 more replies
Answer Match 61.74%

hi all i have an asus crosshair mother board and was told my bios is 2 years old i used the tool asus update but come up no bios updates.
bios at the moment is version asus crosshair acpi bios revision o5o2
just hope u can put my mind at rest
 

A:not a problem as such (latest bios update)

Check the Asus site for updated BIOS's. Or click here and click on BIOS. Note there are two newer BIOS's than your original one.
 

3 more replies
Answer Match 61.74%

Hi, I have a problem with updating the BIOS on a Qosmio G30-162 which appears to be running the following version: -
Version 1.20
DMI Version 2.3
BIOS date 01/21/06

Every time I run the V3.90 update it says that it is not valid for this machine.

Does anyone know how to resolve this issue?

Many thanks

The BIOS update I am trying to run is V3.2.9 (P0038v390.exe)

When I run the files the update says that "This computer is not supported".

Many thanks

A:Qosmio G30-162 - BIOS update problem

Hi

What Windows OS did you install?
If you have installed Win XP then the Common Module should be installed before trying to update the BIOS.
If Vista is installed, the VAP (value added package) should run.

6 more replies
Answer Match 61.74%

Hi,

I have a problem with updates bios of my Desktop Board D102GGC2, running on Windows Vista 32. I download the new update for my motherboard .EXE file from http://www.intel.com
So when my pc finish updateing board in the setup say Flash update is completed successfully! and PC are reboot and nothing on a screen completly black monitor

Pleeeese Help me what is the problem with Intel bios updates

PC are reboot automatic and no sign of my new updates

I also read the Intel Troubleshooting BIOS issues it's say to remove the jumper and try
recover with CD/or Desket I download the BIO file copy to formated floppy disk and try to recover the system but It's wont help!

any suggestion are welcome...
 

A:Express BIOS Update problem please help!

9 more replies
Answer Match 61.74%

Hello, I would appreciate your time if you can help.
I am trying to update the bios on my Gigabyte MA790FXT-UD5P board, using Q Flash and a floppy DD.
I have downloaded the two different versions of the Bios [F6 and F7], now from both Asia and Us download points.
I have F5 on another floppy disk, and used it previously [to recognise latest cpu]
I can see the files on the disk, in Win7, and can open and extract the files from the Asia download, but not the US download.
However, apart from that, when I try to update the bios, the bios cannot find any files for F6 or F7 [They are loaded on separate disks].....
But it can find the files when I try the older [about 6 months] F5 disk, and have successfully updated the bios to F5
So the question is, why can't the bios Q Flash facility see the F6 and F7 files? Is it faulty floppy disks, if so why can Win7 see it. Is it a faulty floppy disk player? It is only 6 months old but in any case Q Flash sees the disk player. Is it faulty files?
Any ideas? Your time and thoughts would be appreciated
 

A:Bios update from floppy problem

10 more replies
Answer Match 61.74%

HELLO WORLD .  I usually update BIOS and so on at here   (http://support.lenovo.com/kr/en/products/Laptops-and-netbooks/IdeaPad-Y-Series-laptops/y700-15isk?ta...) Whenever I update BIOS, I had to open back panel and get rid of SSD (Samsung 950 Pro 256GB) to get into the BIOS settings, then I changed boot mode Legacy Support into UEFI and after I change Legacy to UEFI, I insert my SSD back and boot. And I could check that my laptop's BIOS is updated.  BUT ! Do I have to open back panel with a driver and remove SSD and re-setting boot mode and put SSD back and close the panel ? Is everyone doing what I've done ? it's very tedious and tiresome work to do. Whenever I want to update BIOS, I need a driver to open back and put SSD out and vice versa.    Is there a method to update BIOS update without opening back panel ? Please, Help ME !!!  (I'm using Windows 10 Pro 64 bits)?  

More replies
Answer Match 61.74%

Hello,a week ago I made a BIOS-Update with my T460 from Version 1.07 to 1.10 and then some time later I noticed that from there on the internal battery pack was the first to be discharged to 5 percent load and after that it was followed by the external one. Normally it has to be the other way round.In the beginning I couldn't imagine that it has something to do with the new BIOS but today I installed the old Version 1.07 again and now it works just like before the update and the battery packs are discharged in the right order.I heard also Lenovo engineers and programmers read in this forum and so I decided to write about this problem here. Maybe it's possible to fix this bug with a new BIOS-Update.

More replies
Answer Match 61.32%

Hi,
Last week I updated my machine to the latest BIOS from Dell, file name 7437A10.exe. The machine rebooted fine after the installation and worked fine for a day or two. But now my machine will not boot pass the DELL logo (the progress bar at the bottom keeps spinning). The hard disk light lights up and blinks, indicating that the system is accessing the hard disk.
I tried a few things to get the machine to boot, with no success. What I tried was:

press Start and wait for the machine to boot for about 5 minutes, Iooking at the logo
press and hold the start button for about 30seconds
detach the battery, press the start button for about 30seconds to release any remaining current, attach the battery and tried to boot
reset the bios settings to default

None of these options worked. Can you help me figure out what the problem is?
I'm running Windows 10.

Thank you in advance.
Vassil

A:Inspiron 7437 WILL NOT REBOOT after BIOS Update

Why did you update the bios? Laptops rarely need bios updates and if you do update the bios it should be done before upgrading the operating system. Dell has all the drivers you needed for win 10 here-- 
http://www.dell.com/support/home/us/en/19/product-support/product/inspiron-14-7437/drivers 
Try booting to Safe Mode or to the repair disk you made. You might be able to run the diagnostics to test the hardware and do a custom test of the hard drive. Bios update failures usually do not "work for a few days." It might be a coincidence and something else is causing the problem. Use the links on the Support page to get more info.

2 more replies
Answer Match 61.32%

We need to update the BIOS during our automated Windows 7 OS deployment.It is required that the BIOS install runs with no interaction and that it doesn't reboot automatically so that our deployment process can control all reboots.  I know the BIOS upgrade requires a reboot, but we will add the reboot as a task in our deployment scripts so we can control it.  Unexpected reboots will cause the deployment to fail. Here is a link to the update installation files:http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405401&sp...  Our older laptops used hpqflash -s -a, but it appears it has changed.What is the command line syntax to run this BIOS update unattended with no reboot?

A:650 G1: Silent BIOS Update With No Automatic Reboot?

Begining sometime in mid-2013, notebook platforms began using a new flash utility --  HPBIOSUPDREC.exe. I would have to do some investigating as to how the SilentInstall uses the "hpqrun.exe" command in the cva file , but the map.ini file included with SP65838  provides the following:        1993=hpbiosupdrec -s -r -fL77_0104.bin       1994=hpbiosupdrec -s -r -fL77_0104.bin       2101=hpbiosupdrec -s -r -fL78_0104.bin       2102=hpbiosupdrec -s -r -fL78_0104.bin where the 4 digit number on the left refers to the system ID number. Run HPBIOSUPDREC.exe /?    from a command line window to see all the command line flags.  thanks,RichardI work for HP but am not a company spokesperson. Participation in the community forums is voluntary. 

6 more replies
Answer Match 60.9%

I successfully updated BIOS and others from Lenovo Update center and after restart can't boot Windows 7. It freeze on "Starting Windows".I can't enter recovery, can't boot Lenovo Windows Diagnostics - Bootable USB, can't boot Microsoft Diagnostics and Recovery Toolset USB.Safe mode freeze on Classpnp.sys. I found https://support.lenovo.com/ru/ru/documents/ht101352 , but it don't help. BIOS havn't ?AHCI? setting.  Secure Boot disabled, legacy mode enabled.Solution?

More replies
Answer Match 60.9%

Hello,
I was updating my bios for samsung series 3 and it said the keyboard and mouse will not work during the process and it did not. It started of ok, but then after three hours it just failed. However, other notifications would appear, but then after some time the screen went black and since then it has not been working or responding it boots but nothing on screen it is completely black. I have tried to sort it out by restoring it but no, it's not working. Any solutions? Please.
Thank you very much for your help.

My computer runs on windows 7.
 

More replies
Answer Match 60.9%

I am trying to update the system bios to F.09 Rev A.  The HP support site instructs me to copy the new BIOS to a flash drive, turn off the machine, place the flash drive in a USB slot and turn it back on.  I assume it is supposed to boot from the flash drive, but it does not; it boots normally from the C: drive.  How do I force it to use the flash drive to update the BIOS?  Thanks.

More replies
Answer Match 60.9%

Hello, I updated the bios using this upgrade (3.05) utility, a couple of days ago. Flash BIOS update - Flash from Operating System version for IdeaPad Y410P/Y510P   Version 74CN44WW (V3.05)This package updates the basic input/output system (BIOS) on IdeaPad Y410P/Y510P From this time;Installed memory (RAM)  appears as only 4 GBBut before, this was 8 GB (7,8 GB usable) What may be the problem?How can I downgrade my bios to previous v2.07?Is this problem related with this bios update?Please help.(Thank you in advance) 

A:Ram Problem after Bios Update Y510p single GPU 755...

You can try to reset the BIOS. 1) Shutdown the laptop.2) Unplug all power supply3) Take out the battery.4) Hold laptop Power button for 1 minute.5) Connect everything back and start the laptop.6) Check if your RAM is displayed correctly.

9 more replies
Answer Match 60.9%

To start i'd like to just say how much i hate this board and how i'll never buy another Gigabyte again.

First I had problems with getting my memory stable with my mobo (solved by following a guide by gskill rep). then i keep having problems with random crashes in games and couldn't find a solution so assumed that i needed a bios update. The @bios utlity keeps updating to FB even tho there is verison FC. So i download FC from the gigabyte website and use the ultity to update bios from file.

then my computers beeps like its the end of the world a couple of times as its not able to even post. Eventually it gets something resembling stablity and posts. then windows will not load and if it does it immedately crashes giving me all kinds of BSoD's (reoccuring and also some new ones).

I assumed this update would solve the memory compatiabilty issues so i figured setting everything back to auto would resolve this. NOPE! beeps to high heaven a couple of times before it can post. i try the settings that the gskills rep provided and still nothing. my computer can't even boot up anymore and i think this whole ordeal has ****ed up windows beyond repair so i'll probably have to reformate and install for the 7th time in the 2 weeks i've had this machine and OS.

this is sh*t. i hope there is someone out there who recognizes this issue. PLEASE GOD SEND ME SOME HELP!!

A:GA-EP45-UD3P Rev 1.6 bios update to FC problem

Sorry to hear that, but I'd sooner have Gigabyte than a lot of others I could name

7 more replies
Answer Match 60.9%

Hi..

I had some problems with a Zalman (I think it still has problems) it was reporting 1800 rpm instead of 2000 +..

Anyways , I assumed that the Motherboard may well be reporting the wrong rpm's so I decided to check Bios updates . I did have the latest Bios Update and assumed that the previous Bios was reporting my CPU cooler as correct..

So I ran the AsusUpdate utility to see what it can do..There is a Bios Downgradable option, I didnt have the previos version backed up so I re downloaded the previos version and then ran the Downgrade option. I browsed to the Bios file and updated to the previos version..

All seemed to go well, I get no Bios Errors on boot and all settings seem fine..

But I have 2 issuses On Board Sound dont work (Even tho I have a Audigy Card) and when I run dxdiag instead of Giving me the Mainboard Name it says "To be filled by O.E.M"

So I read on the internet that you can recover the original Bios from the Support CD...

So I restart PC with CD rom and press Alt/F2 to run Flash Bios Utility, when prompted I browse to the Original A8V bios file and recover the Bios... Again all goes well but still no Onboard Sound..

Any one have any ideas...or is my bios screwed...

Thx for any input..
 

A:Asus A8V Deluxe Bios update problem...

So why do you want to have onboard sound when you have an Audigy card? Are you sure the onboard sound is not disabled in the BIOS or automatically disabled when you install a seperate PCI card? Did you install the drivers in Windows?

As for the "To be filled by O.E.M", its not uncommon for some fields to be left blank and it won't cause any problems. Repeatly updating your BIOS can be much more hazardess if something goes wrong and the board will not longer boot at all.

I also don't understand the whole thing about downgrading that you are talking about. Whenever you need to do a BIOS update you only ever need to update to the latest version as all previous fixes are included in the latest one. You can back up the current BIOS version if you wish to have for a backup.

And the fan RPM's; fan speeds are rarely constant and can be mis reported slightly - again not an issue thats worth the risk of updating the BIOS.
 

2 more replies
Answer Match 60.9%

Hi all. i have Acer Veriton m4620g i5 3470 500gb 4gb ram Desktop. i am trying to update bios in windows mode.unfortunatelly get an error 3-Error :Rom file size does not march existing bios size.trying other versions but lo luck.is there any way to bios update? Thanks for any help... os:win7 x64bios : P01-A01L   

A:Veriton 4620g bios update problem

Which Bios did you try to update too?The P01-A0L at Acer is newer than your P01-A0L.Do you know the size of your current bios?Did you try this one? Did you have the battery charged nothing open?BIOSAcerBIOS for LinuxP01.A0L2.0 MB2012/07/20DownloadUpgrading your system BIOS incorrectly could harm your Acer Product. Please proceed with caution. 

7 more replies
Answer Match 60.9%

Hi, brand new laptop is requesting several updates (which is expected). I have since installed every update above and below the BIOS request; However, I cannot install the requested BIOS update. The HP Support Assistant has run for TWO DAYS now and will not complete. I have also tried the web based approach and it says the update is BLOCKED? Please advise!

More replies
Answer Match 60.9%

Hi,
I have a Inspiron 15 7547,  its fairly new i got it for christmas.
I went to my dell or whatever it's called i saw that by bios needed an update. I thought it was necessery so clicked update. My Inspiron started updating, the fan was on max rpm working loudly. I waited about 10min, the progress bar/window did not change so i decided to take a nap. Ooo was I surprised when i woke up, the computer was on but then screen was black. I restarted the pc holding down on the on-off button. Now all I get after turing on the laptop is a balck screen.
Please help, my computer is still on warranty according to dell.com
I'm on a job in Europe, i need my dell for work. I'm forced to work with a  borrowed laptop. Is there anything i can do to fix this issue? Please help...

A:Problem after bios update - black screen

As you know now, updating the bios is not something to do casually and especially while out of the country or anywhere with unreliable power sources since the slightest interruption or fluctuation of power can fry your motherboard. Sorry. I guess you'll have to wait to return to US to fix this under warranty or maybe someone else has a better idea.  

3 more replies
Answer Match 60.9%

I have two problems with updating the BIOS (the 1st is more important then the 2nd one):

1. While trying to install BIOS Update 6.70-WIN (29/11/13) it says that:
"The version of ROM file is the same as that of BIOS"
and it stops. In the DOS window it shows one phrase:
"NOT Windows 8 Platform, using Windows 7 update...".
I use Windows 7 Home Premium 64bit system but recently there has been major automatic update done to it.
I got lost. Is there anything I can do to update BIOS?

2. Earlier it says that Flash process will be terminated and I need to "contact OEM BIOS engineer to add the NV storage location by HISII interface". But if I want to risk I can continue etc.

Previously I took the risk and updating went well.
But is there possibility to contact OEM BIOS engieneer?

A:BIOS Update 6.70 problem with Satellite Pro C850-172

Hi

>While trying to install BIOS Update 6.70-WIN (29/11/13) it says that:
>"The version of ROM file is the same as that of BIOS"

What is the present BIOS version which is available on your notebook?
In case the BIOS is already up to date, the BIOS flash procedure will be interrupted.

>"NOT Windows 8 Platform, using Windows 7 update...".
I?m not quite sure about the meaning of this information but it looks like the BIOS update was released for Windows 8 system and probably its required to upgrade the system from Windows 7 to Windows 8 in order to be able to flash the BIOS

By the way: why you want to update the BIOS? Just because new version is available?
Please note that BIOS update does not improve the notebook performance but fixes some issues. In case your notebook runs properly, the BIOS update is not very important

4 more replies
Answer Match 60.9%

Hi all. i have Acer Veriton m4620g i5 3470 500gb 4gb ram Desktop. i am trying to update bios in windows mode.unfortunatelly get an error 3-Error :Rom file size does not march existing bios size.trying other versions but lo luck.is there any way to bios update? Thanks for any help... os:win7 x64bios : P01-A01L   

A:Veriton 4620g bios update problem

Which Bios did you try to update too?The P01-A0L at Acer is newer than your P01-A0L.Do you know the size of your current bios?Did you try this one? Did you have the battery charged nothing open?BIOSAcerBIOS for LinuxP01.A0L2.0 MB2012/07/20DownloadUpgrading your system BIOS incorrectly could harm your Acer Product. Please proceed with caution. 

7 more replies
Answer Match 60.9%

Hello everyone, I have a Lenovo IdeaPad G500s with Windows 7 x64 notebook and I wish to update my BIOS. The problem occurs when I'm trying to run the setup with following message: "This BIOS is not for your Notebook PC.This version of ROM file is not newer than that of BIOS. " ? I have original notebook's battery inserted.? Battery is more than 30% charged (30% is required for installation).? My laptop has no previous updates of BIOS. Current BIOS Version: 7BCN28WW(V 1.11) ID: VILG1 I downloaded this BIOS update from official page that says its for my notebook and supports my OS.[link] Any ideas what can be wrong?  

A:G500s - Problem installing BIOS update

I update my g500s VILG1 motherboard bios v1.05 to version 2.02. I found bios in lenovo repository. Direct link is https://download.lenovo.com/consumer/mobiles/7bcn36ww.exe

1 more replies
Answer Match 60.9%

Hi, I have a Dell LS400, I am trying to upgrade the bios but, when i install it from the floppy I get a message saying

"Error! This utility does not support this system"

The current Bios is A05 and I want to upgrade to A08

I have also tried A06 bios (an executable file), this would not recognize a latitude system.

Reason for the upgrade is the system does not recognize 256mb ram

Any help welcome.
 

More replies
Answer Match 60.9%

Hello, I have a ThinkPad X1 Carbon 3rd generation. Two days ago, I have updated the BIOS to the latest version 1.12. The installation went well and I successfully booted into Windows 10 with no issues. However, the fan was not working anymore. I did not notice this until the laptop was extremely hot (which is very unusual for this laptop under low/medium load). In particular, I was just running a "disk cleanup" using the native Windows tool and after 5 minutes I decided to kill the process (this operation usually takes 1-2 minutes). My feeling was that due to the temperature the cpu was in throttling. At that moment, I noticed that the fan was not active. After a shutdown, the fan was again working. However, I noticed that the fan kicks in much more often than it was used to. For this reason, I did two things:- I have downgraded the BIOS to 1.11: BIOS 1.12 updated the CPU microcode, I am not sure that the microcode was downgraded as well when I downgraded the BIOS. - I have run the "Intel® Processor Diagnostic Tool": I was afraid that the high temperatures may have damaged the cpu. The tool reported that the maximum temperature of the cpu during the benchmark was always safely within the expected threshold and all the tests were passed. Now, I still can see that the fan kicks in much more often than usual. I have noticed, using sensors under Ubuntu 15.10, that every time there is a very short burst/peak of... Read more

A:Fan Problem after BIOS Update - ThinkPad X1 Carbon...

Laptop has got anti overheat thing so if temp rises over 100c it will automatically power off like if the battery was dead and that you unplugged it that sort of power off so temps you don't have to worry but as long laptop alone isn't idle at 80-90c then laptop needs clean out to fix it and if that won't fix it then it could be something else

9 more replies
Answer Match 60.9%

Hello,

I have problem with Intel Express BIOS Update.
After running update program( downloaded from intel.com pages: WB91X10J.86A.1319.EB.EXE) it shuts down system, but do not reboot it, neither update BIOS. It just freeze ( I can just hear some noices from my CD mechanics - like trying to run CD in it...?)

I must manually restart system( I was waiting 5 mins and nothing happened). Then it boots and shows dialog box, which says that update of BIOS was successfull. But it is not true. There is still old BIOS.

If anyone can help, I'll appreciate.


Miro



I have motherboard with 915GWVB chipset( Intel West Branch),
version of actual BIOS is WB91X10J.86A.1037.2005.0216.1050 so I can update to WB91X10J.86A.1319 directly( following instructions on http://www.intel.com/design/motherbd/wb/wb_bios.htm)

And I'm running WinXP Pro, SP2( if it is relevant)
 

A:intel express bios update problem

Hello! Welcome to TechSpot!

I don't know of anyone that trusts any bios
program titled "express, live update, hands free etc."
I would pop the the cmos battery out for a few mins.
(resetting the bios to default), then manually update the bios from a floppy
per these instructions: standard bios.htm

If anyone here can dispute this I'd really like to know.
Bios updating is the only reason I still have a floppy.

G'luck
 

2 more replies
Answer Match 60.9%

Hi,The other day I updated my Lenovo Flex 2 BIOS in win10, downloaded the official update file from Lenovo Support Website, and proceeded with the setup but after update, I haven't been able to boot the system up again!On the other side, I have forgotten the password I have set for BIOS settings, several months ago!So overall, I have a laptop with secured BIOS and a failed attemt to update it's BIOS which doesnt boot and stays in this page no matter which option you choose:?I live in Iran where Lenovo doesnt have any official support centre so on the other hand, my hands are tied.But I would be glad for any help you could provide Thank you all

More replies
Answer Match 60.9%

Hello to all,

I have a Toshiba laptop which requested to Update into the new bios ,from 1.40 to 1.60 so i pressed Okay,all went well all green at 100% , it restarted and from then i have black screen.

I searched around the internet and i saw many people with the same laptop as mine ,to have the same problem ,i think it's problem from Toshiba (out of warranty product).

I have found that the only bios file that i get from the european site is the 1.60
So i download it , i extract it to use with crisis but inside i see 2 folders

DIS (inside has bios.rom and ec.rom)
UMA (inside has bios.rom and ec.rom)

Don't know what to use, or how do i get it alive ,any help ?

I tried with both folders with all the necessary things.

More replies
Answer Match 60.06%

Hi,

I am having difficulty updating BIOS for a Toshiba Tecra A9 -11i laptop, (using latest update from the official toshiba european site); after running the bios launcher (version 3.2.8)
I get the following message ' this computer is not supported"? The current installed bios version is 1.5 , date 7/5/2007

also if i may add a couple of further issues:
the function buttons tdon't appear to be working;,,
the led light for the 'FN' key lights up when key is pressed so assume FN key works, but there's no response when pressing the ''FN' key and one of the f number keys - i installed the command module software as have been advised but this hasn't solved it.

I also having difficulty getting AHCi' mode to work in Windows XP Pro SP3; I have intel chipset 965m +ICH8M, the Intel ICH8M serial ata storage controller-2828 shows in device manager- the matrix storage manager won't run so i copied the file iastor.sys from the matrix manager folder into C:/Windows/Driver/system32 and edited the registry as read elsewhere on the forum but have had no joy.

any advice would be greatly appreciated,many thanks.

A:Tecra A9-11i: Bios update problem and AHCI not working

> I am having difficulty updating BIOS for a Toshiba Tecra A9 -11i laptop, (using latest update from the official toshiba european site); after running the bios launcher (version 3.2.8)
I get the following message ' this computer is not supported"? The current installed bios version is 1.5 , date 7/5/2007

This error message appears if you want to update a BIOS which is not compatible with your notebook model.
Toshiba European driver page provides the 2.10Win BIOS for this notebook model.
So you used definitely wrong BIOS.

> there's no response when pressing the ''FN' key and one of the f number keys
Common modules controls the FN buttons.
So the issue should be solved installing Common Modules v 6.06.00, Utilities 4.30.15
Note; You have to press FN + 1, 2, 3 etc? DON?T press FN + F1 etc?.

> I also having difficulty getting AHCi' mode to work in Windows XP Pro SP3; I have intel chipset 965m +ICH8M, the Intel ICH8M serial ata storage controller-2828 shows in device manager- the matrix storage manager won't run so i copied the file iastor.sys from the matrix manager folder into C:/Windows/Driver/system32 and edited the registry as read elsewhere on the forum but have had no joy.

Firstly be sure that AHCI is enabled in BIOS!!!
Furthermore the Intel Storage Manager controls the AHCI so you should slipstream the AHCI driver to the Win XP CD as described here:
http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm
or here
http://aps2.toshiba-tro.de... Read more

1 more replies
Answer Match 60.06%

Hi, so here's part 2 about my bios update problem.

Below you can find my initial post, detailing the problem. It's under . Read that first!

Additional steps I took since then: sent the laptop to a repair shop which came recommended by a well-respected bios site. They tried everything, and the laptop's fans do spin (meaning also the cpu fans), and the led does go on.. so that's an improvement, i guess. but since he doesn't have the original bios image for the laptop that's it.. I did send him the N61Ja.BIN located in C:\ which should be the original bios backup, but that didn't work.. none of the bios files from the asus website worked either..

Anyone have any suggestions? Or can provide me with the original bios image (207) for the Asus N61Ja-JX046X?


Hello,

I wanted to update the bios, with an official bios update, from version 207 to 211. I didn't use winflash, I used easyflash in the bios. Everything seemed to be going okay; it deleted the old files, wrote the new ones, verified the new ones. Then it said: shutdown in/after 2 seconds and it shut down. Then nothing happened anymore. Power button completely unresponsive. The battery light was still on, and I'm not sure if I should've just waited... I didn't though, I thought I had to remove the battery, take the power off completely to be able to start it up again.

So I'm wondering: what are my options here? My warranty expired and I don't really have the money to send it in and pay hundreds of bucks on ... Read more

A:Asus n61Ja bios update problem, part 2. Please help!

Oh, one more thing:

the guy at the repair shop tried all the bios files on the asus website.. and the N61Ja.BIN in C:\.. but none worked..

He told me this:

>>>
biosfile is 2048kB in size.
normally you put the biosfile in the chip from address 0
chip is twice the size. this is sometimes used for a/the backup bios and sometimes just isn't used at all (also they can then release bigger bios versions that will still fit, if they want)
sometimes you put the bios file in from the 2nd or 3rd block; tried all of that
also tried loading it from address 10000h which has worked on a laptop before but that didn't work either
laptop fans and led working says nothing; theyre being powered but without the right bios thats all they will be
<<<

He tested the bios chip and the cmos battery and both were fine, btw

1 more replies
Answer Match 60.06%

I am trying to update my bios for my inspirion 531 to the latest bios as i am running 1.0.6, when i run the program on my desktop it creates a item named winflash.sys but wont do anything past that.  Is there any additional programs I need? I am really trying to avoid having to call outside of warranty tech support for this.

A:Inspiron 531 1.0.13 bios update problem, wont flash

Anyone?

28 more replies
Answer Match 60.06%

My PC crashes frequently and the blue screen mentions to update BIOS as one way to prevent the crashes
I have recently upgraded my RAM from 512MB to 1512MB, also my graphics card from Geforce 6200 to a Geforce 8800 320MB, also from windows XP to Vista. The PC make is a siemens Scaleo P with 3.06Ghz and a Celeron D processor.
however when i tired to update my Bios i couldnt find the download. My motherboard is made by Gigabyte (GA-8S649 MF) the nearest is GA-8S648 and 650. when i search the motherboard number on google the results are rare and foreign making it difficult to understand.
Please help and all advice is welcome
cheers
 

A:Problem updating BIOS, can't find update from manufacturer

Hello and welcome to Techspot.

Have you tried the Fujitsu/Siemens website?

You will need to enter the serial number into the search options.

Regards Howard :wave: :wave:
 

2 more replies
Answer Match 60.06%

Hi All,
I tried flashing my BIOS through windows as recommended on my Laptop Manufacturer (Toshiba) website. I guess the process went wrong as after 2 hours still the message "Do not interrupt" was getting displayed. I had to force power off my PC. Now it is not booting up.
The Laptio is Toshiba SA50-114, Satellite series.Model No - PSA50E-06V053EN.

I have tried suggestions in following link
askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1169474xml&sliceId=&dialogID=28948623&stateId=0%200%2035586212
However, this did not work.

I would like to try suggestions in
devhacks.com/bios-update-failed-heres-what-you-do
However, I don't have the recovery disk tool and BIOS/ROM file. Have tried searching on internet, but with no results.

Can someone please help me with
1. How can I perform the BIOS update to get my PC running back.

2. Point me to links where I can find the files in the abov link.

Many Thanks in advance.
Best Regards,
Parag
 

A:Problem - BIOS Update - Toshiba Satellite SA50

You may be out of luck here... They don't give serious warnings for flashing the bios for nothing... You might have to replace the motherboard. It is that serious
 

4 more replies
Answer Match 60.06%

I tried to update the bios of my laptop the laptop has jammed during this op?tation and unbootable

More replies
Answer Match 60.06%

CANNOT CONTROL SCROLLING. CURSOR DROPS DOWN TO BOTTOM MAKING IMPOSSIBLE TO SAVE TO A FOLDER

More replies
Answer Match 60.06%

I figured an interesting title would draw more responces.

Anyways, here's the issue.

I recently updated my bios software to the latest edition via MSI's live driver update. Everything seemed to work fine except at reboot there was a CMOS error. No problem, I just reset all the bios options using default optimised, and then manualy toggling what I need and not. But that isn't the problem. The problem is that now.. upon powering down the system, the keyboard lights (numlock, F-lock) and the mouse's LED's and movement detection lights remain lit. It required me to shut off the power supply and wait a minute before it goes off. This problem started immediatly after the bios update. I've disabled all power suspension and wake features. What is causing this and how can it be rectified?

Pc specs:
MSI K8T Neo2 (K8T800 chipset)
Athlon 64 3800 Venice (no overclocking)
512 megs of Ultra brand ram.
Maxtor 6Y080P0 HD (IDE, 80 gigs)
Gforce3 ti500 videocard (yeah, I'll upgrade when I'm done paying off the rest)
Bios version 9.10
OS: Windows 2k service pack blahblahblah (current)
Mouse: Microsoft Intellimouse Explorer (not wireless)
Keyboard: Microsoft Digital Media Pro keyboard
 

A:Mystery of the Bios Update Peripheral Power Problem

Howdy!

What led to the bios update?
Have you cleared the cmos, then reset bios settings?
Could you roll back to previous bios?
Keep posting we'll try to help out!
G'Luck
 

8 more replies
Answer Match 60.06%

Hi all, I've been reading tonnes of threads here trying to solve my problems (which seem to keep getting worse) to no avail. I'm reaching out to anyone that can suggest some help before I end up bricking my yoga by accident or running it over on purpose. I'll give you a timeline of the events. The machine in question is a Lenovo Thinkpad Yoga 12.5" 20CD-0032USIntel Core i5 4200U 1.60GHz Processor4GB Ram128GB SSDWindows 8.1 64 Bit preloaded (recently upgraded to Windows 10) So the saga begun just a short two days ago. I had some spare time at home and decided to download and install my free upgrade to Windows 10. I backed up all of my important documents etc to OneDrive as I intended on performing a clean install. Said clean install went flawlessly with Windows 10 installing the first time with no issues or errors. Since I had performed a clean install, all my previous apps, including the stock Lenovo apps, had been deleted. I had anticipated this and only really desired to reinstall the app that automatically adjusts the screen orientation when folding the cover back. So in an effort to find this app and any Windows 10 related updates that may be available I went to support.lenovo.com and used the handy Lenovo Bridge app to automatically detect my hardware and suggest relevant updates. While combing through the suggested software I noticed a BIOS update that noted added support for Windows 10. How great, I thought, that Lenovo would have a BIOS update read... Read more

A:Thinkpad Yoga BIOS Update Problem after installing...

I'd try to re-update the BIOS using the same version, but from a flash drive instead of from within Windows. Maybe something went wrong with it (updater doesn't properly support Windows 10?).There's a few ways to put the bootable BIOS update ISO onto a flash drive, but there's a guide for one here:http://www.thinkwiki.org/wiki/BIOS_Upgrade#Booting_from_a_USB_Flash_drive

3 more replies
Answer Match 59.64%

Dear Lenovo Staff,I'm experiencing multiple issues running Ubuntu on Lenovo Y700-17ISK laptop:https://forums.lenovo.com/t5/Linux-Discussion/Problems-running-Ubuntu-on-Lenovo-Y700-17ISK/td-p/3278... At the end, I installed Windows 10 alongside with Ubuntu 16.04 only because of BIOS updating.During the last month or two, it was impossible to find any BIOS file on 'Y700-17ISK Laptop - Lenovo Support' web page.Today I finally found a new BIOS update file: Released 7/18/2016, Version CDCN35WW. But when - hoping to solve problems running Ubuntu on Lenovo Y700 - I attempted to install this latest BIOS update file through Windows 10, I got the following error message: "the version of ROM file is the same as that of BIOS". And then I found this forum post (05-18-2016):"Please be advised that Lenovo is in the process of removing the BIOS CDCN35WW for ideapad Y700-15ISK, Y700 Touch-15ISK, and Y700-17ISK laptops in response to customer reports that the software does not execute as expected. Once the issue has been corrected, CDCN35WW or a newer version of the BIOS will be made available". Once the issue has been corrected, CDCN35WW version of the BIOS will be made available again????????So I downgraded my BIOS CDCN35WW to BIOS CDCN30WW, and after that I installed again BIOS CDCN35WW - everything went well, but now my BIOS shows it is CDCN30WW version??? I would be very grateful for any help, thanks in advance.

A:PROBLEM: BIOS UPDATE FOR LENOVO Y700-17ISK Laptop

My Bios is CDCN34WW so I did upgrade to version CDCN35WW (latest from 18.07.2016) installation went very good,no errors or problems diuring instalation proces but after rebot my computer shows that I'am still on CDCN34WW version.What's i should do now...?

3 more replies
Answer Match 59.64%

Hi Everyone!
This is my first post here, but I promise I'll do my best to make sense.
I've been using a PC since 1999, but I've always stayed away from the technical end of things & had the "experts" deal with problems because my mind just isn't wired-up to be a DIY lady. Since money is quite scarce due to my disability, I have to be the one to do what's needed this time, & with your guidance, resolve the current problem. In my defense, I'm no dummy & I'm a quick learner... I can do just about anything...as long as I have very detailed instructions from someone who knows what/how to do what needs to be done, & that's where all the more knowledgeable people on this Forum come in. I'll do my best to explain things, but if I leave something out, just ask & I'll do my best to fill in the blanks. Thanks for taking the time to read my post...I'm very grateful for your help & especially for your patience!
Now to my problem....

I'm running Windows 8.1, 64 bit on a Lenovo G585 Idea Pad. About a month ago, I noticed a sharp decline in my PC's ability to handle streaming media & performance in general. (I rely heavily on streaming media ability, as I keep records on Bald Eagle nests for research & educational purposes), & I always have at least 1 nest cam on 24/7, (usually 2-4), & I used to be able to have Firefox or Pale Moon browser open with the live nest-cam feed st... Read more

A:Streaming media problem...how to update drivers or BIOS correctly

You should always get the most up to date drivers for your laptop from the manufacturers support site Runnin driver updaters often give you drivers that are actually out of date. As far as BIOS updates, you should only Update the BIOS if the update corrects an issue you are having with your computer or to add compatibility for new components.

As far as trusting any customer service or tech support from Comcast goes, they have been being raked over the coals lately for their lousy service including blaming customer equipment for problems that are Comcast service and equipment problems. On the sad side you not have a choice as they may be the only broadband service available in in your area.
 

2 more replies
Answer Match 59.64%

Hi, I have lenovo G580 20157 laptop with windows 8 pro, i found a bios update 62cn97ww on support site but when i restarted my laptop and run the 62cn97ww update it just hangs and does not respond. kept ideal for long time to restart but no response. Any help on this?

A:Lenovo G580 20157 bios 62cn97ww update problem

hi adarsh_savant,
 
I think you may have concern in this thread,
http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/G580-Bios-update-problem/m-p/1199186/highlight...
 
Here the suggested solution from neokenchi that helped.
 
1. Boot into the BIOS by repeatedly tapping F2 on startup
 
2. In the BIOS, navigate to the Boot Tab and set UEFI to Disabled or Legacy then press F10 to save and exit. When
the computer reboots, check if you still get the errors and/or if you're able to boot into Windows.
 
3. If same problem, leave the changes that you made on Step 2 and attempt to re-install Windows via a Windows 8 recovery drive or OneKey Recovery button (note that this will wipe the computer to factory settings)
 
Hope this helps,
Cheers!



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 58.8%

I updated the Bios for my Trigem IM845GL motherboard. During the system booted up sequence it displayed the new Bios software screen then just before booting up the operating system (windows xp) it said:

'A disk read error occurred, please press ctrl+alt+del to restart'.

I think I might have installed the wrong Bios drivers??
I have checked the bios to ensure that the hard-disk is the main bootup drive and it is.
I have reset the bios by moving the jumper blocks leaving them in the 2-3 position for 30 seconds replacing them to 1-2 position. But it did not clear the bios.
Since the computer came with a specialised company software on two disks by setting up the bootup to be the cd-rom drive and putting in the disk it only has the option of deleting the data on the hard-disk and re-installing all the standard software. I don?t want to loose the data so this isn't a option.
Can anyone please help as this is really doing my head in!!!!
 

A:Trigem IM845GL motherboard Bios Update Problem, Panic stations

im845gl motherboard bios

i have the solution to your problem and can send it to you through an e-mail.
you have to put the information on a floppy disk and insert it into your computer at the start up then press alt + f2 and this will update bios to the original state.
 

2 more replies
Answer Match 58.8%

Resolution: Dell Inspiron 5459/5559/5759 BIOS Update - Will not boot after update
"No boot drive found", "PXE... Media test failure"
If you updated from 1.0.x to 1.1.5 (or other) and find yourself scratching your head in a panic that your system won't boot up, reboot and press and hold the F2 key when you see the Dell logo (shortly after restart). When the bios settings page opens, click restore settings to default, save, and then exit. Your system should boot to windows now :-)
If you don't care about default Keyboard LED brightness or Fn Lock key default status, disregard the following:
After your system restarts into windows, restart and repeat to enter bios. There are some minor settings that change -- They are minor and don't affect performance.  Under System Configuration, Keyboard brightness changes from dim to bright. Under Post Boot, Fn lock key changes to unlocked.
Have a nice day. Hopefully if you're reading this you already figured that out on your own.

A:Dell Inspiron 5459/5559/5759 BIOS Update Error - WILL NOT REBOOT

Hello,
I am facing the exact issue for my 5559 laptop after updating bios from Dell update site. 
It had 1.1.5 if i remember correctly, and update was for 1.1.6 using Inspiron_5459_1.1.6.exe 
Only problem, reset to default settings does not solve it for me. Its still the same PXE E61 Media test failure and NO Bot device found error. 
Is there a way to boot from usb and flash it to original version ? 

11 more replies
Answer Match 58.38%

Hi,

I have a similar problem, I have an Intel mother board - dg965wh and after installing windows xp - i see that error in scsi/raid host controller issue.

I've tried installing the storage matrix driver that comes with the mother borad disc, and the same driver from intel support site.

No luck...

problem still exist - I don't have raid/scsi on my system, but I don't like to leave it at that...

Any ideas?

thanks. Nitay

A:RAID/SCSI controller problem after BIOS update and re-imaging the system drive

Enter the BIOS at startup and check the controller's settings, the SATA/RAID contoller may be disabled there.

What's the message under device status when you double click the flagged device in the device manager ?

3 more replies
Answer Match 58.38%

Hello I have a Asrock 775I65G Motherboard and it has a Bios version of P1.60 and i have downloaded the 3.30 bios updater from asrock.com(its the windows version)but when i try to run it it gives me an error saying Error: Rom File Size In Correct.I have tried all previous versions and none worked they either said Error: Rom File Size In Correct or Error: File ROM ID incorrect
what do i do?
Thanks for your help in advanced
(I know this is in the wrong section but i couldn't find a sutible section for this question

A:Asrock 775I65G Bios Update Problem Error: Rom File Size Incorrect

It is not a good idea to update a BIOS using a Windows updater. These work *most* of the time, but fail far more than the DOS versions do.

Do you have a floppy disk drive in that PC?

If you still want to use the Windows updater anyway, delete that ROM file and download it again. You could have had a bad download.

3 more replies
Answer Match 54.6%

So, earlier today, everything was fine. My computer was working normally nothing was acting up. While unplugging my laptop from the wall I dropped it, but nothing appeared to be wrong. A little while later I restarted my computer and it worked fine for about a minute and then everything froze in windows explorer, nothing would work, folders wont open task manager never appears start menu wont come up, nothing.
I booted into safe mode and everything works fine through there, so I looked around online and one suggestion was to update my BIOS so I tried to update from Dells Inspiron 1420 A08 to the newer A10 BIOS version, trying that in safe mode failed so I tried to boot normally and quickly do whatever it told me, when I tried it wouldnt restart (and still refuses too, I have to shut it down manually outside of safe mode) it said it couldnt update the BIOS version because it couldnt locate the image, but I downloaded it directly from Dells own website.
So then I tried to do a system restore, and I got the message:

The disk Vista (c:) has errors
Windows detected file system corruption on Vista (c:)
You must check the disk for errors before it can be restored.

So I clicked scan and fix, and nothing happens. (this is back in safe mode by the way) so I opened a command promp and typed sfc /scannow
and it scanned and found some errors but were unable to fix them. Details are located in the CBS.log
So I opened the log and I found the following:

POQ 62 ends.
2009-03-2... Read more

A:Vista - Explorer Freezes on reboot, system restore fails, BIOS update fails. Help.

Hi, the first rule if you ever drop a laptop (and it appears OK) is to take the battery out, boot from the mains if all is OK turn off add battery and reboot. Now you may have damaged the MB and or the RAM seating or HDD cable connection as well as the monitor connect cable.. etc ...etc. You can see where this is heading to the shop would be my advice.

1 more replies
Answer Match 54.18%

Thanks for the forum.

First - Network problem prevented internet access. I used "Diagnose" and "Repair". Repair found something and "fixed" it. Internet accessed after that.

Even Log:
Code:

Problem signature
Problem Event Name: NetworkDiagnosticsFrameworkV2
Vendor: Microsoft
OwnerHC: WinInetHelperClass
OwnerHCVersion: 1.0
SessionStatus: 2
HRESULT: 8008F906
Repair: {30B6B189-CCE3-4b6f-877B-C1AE960CE1EF}
RootCauseHC: Winsock
RootCauseHCVersion: 1.0
RootCause: {D438FDF3-F143-430e-B187-E02B2E14B641}
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033

Files that help describe the problem
eventlog.etl

Second - Firefox (Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2 (.NET CLR 3.5.30729) will load, but will not search for page. Page viewing area remains blank and page status says "Done". I uninstalled and reinstalled without deleting user settings. This did not repair Firefox.

Third - Outlook 2007 Trial Version (12.0.6504.5000) SP2 MSO
(12.0.6425.1000) - Will not login to server. Error message reads "Receiving reported error (0x80040900). The server name you entered cannot be found on the network. (it might be down temporarily) Verify that you are online and that the server name is correct.

There is no event log associated with the Outlook problem.

Event logged from same day, but I'm unaware of how this fits:

Code:
Problem signature
Problem Event Name: ... Read more

A:Network problem became Firefox & Outlook problem, then MS update became AVG problem

??? Highhunter, Is this a reply to my earlier post???

19 more replies
Answer Match 52.92%

I receive a notification to update a BIOS, I accept it and the tablet download a updtaet. Now every time I turn on the tablet, it go to a screen with the title HP bios update, the text of the screen say: **************************************The system bios is being recovered. The recovery will take several minutes to completeDo not shut down your computer during the processWriting new BIOS image block xxx/2048Progress from 0 to 100%***************************************  after that, the screen change to  ***************************************The system bios is being recovered. The recovery will take several minutes to completeDo not shut down your computer during the process Verifying new bios imageblock xxx/2048progress from 0 to 100%***************************************  and chage to  ****************************************System BIOS recovery is completeUpon restart. the screen may be black for a few minutes and varius led lights may flash. Pleasedo not attempt to interrupt or power down during this timecontinue startup15**************************************** them the tablet reboot and start again. 

A:HP bios update recovery, reboot and recovery again

Hi,       Since you mentioned that the tablet is going to  a screen with the title HP bios update.The system bios is being recovered. Please provide me the product number and serial number of unit so i can check for solution. If it is a android tablet you try performing the steps below. With the tablet powered off, press and hold the volume up (+) button and power button at the same time for about five seconds. ... When the Android system recovery menu displays, use the volume down (-) button to highlight Wipe data/factory reset.   ******Clicking the Thumbs-Up button is a way to say -Thanks!.********Click Accept as Solution on a Reply that solves your issue to help others** I am an HP Employee

1 more replies
Answer Match 52.92%

My computer is an HP Pavillion DV9500 laptop with 2GB RAM and a 130GB WD hard drive:The last thing I remember doing to my computer is installing a SanDisk Sansa Clip MP3 player with software. Now my computer will only run in SAFE mode. Otherwise while in standard startup, the computer either keeps rebooting or will stop responding while still having the lights on. There is no response to either the keyboard or mouse and the only thing I can do is hold down the power button until the computer shuts off. The computer will also boot from a BART PE Boot CD or Ultimate Boot CD or Active Boot CD for Windows and run all programs okay but still find no problems. I thought it might be a hardware problem as I replaced the Hard Drive recently but the laptop runs fine in SAFE mode and also from boot CDs. I have Microsoft Security Essentials for an antivirus program and a NetDefense Firewall from SystemSuite 11 Professional. I am enclsing the Malwarebyte's scan results and the GMER log file.Malwarebytes' Anti-Malware 1.51.2.1300www.malwarebytes.orgDatabase version: 8319Windows 6.0.6002 Service Pack 2 (Safe Mode)Internet Explorer 9.0.8112.1642112/5/2011 3:18:47 PMmbam-log-2011-12-05 (15-18-47).txtScan type: Quick scanObjects scanned: 204779Time elapsed: 7 minute(s), 1 second(s)Memory Processes Infected: 0Memory Modules Infected: 0Registry Keys Infected: 0Registry Values Infected: 0Registry Data Items Infected: 0Folders Infected: 0Files Infected: 0Memory Processes Infected:(No malic... Read more

A:Redirect Problem and Reboot Problem

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything. We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/430951 <<< CLICK THIS LINK If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.*************************************************** If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lo... Read more

2 more replies
Answer Match 51.66%

I have an odd situation I have been tracking for some time and I think I have it isolated to when it will occur and when it does not. I am posting
it just to see if anyone else has this issue and knows of a fix. My guess is most people just think their PC is stuck and power off and back on to reboot.
The issue was that when my Windows 7 pro laptop applied a Defender update  the laptop took roughly 45 minutes to reboot.
What I found was the issue happens in these situations:

The Defender patch was 400KB or largerA Windows Restart is used to apply the patchIf I applied the patch via a Windows update manually, then issues a Windows RestartIf I allow the patch to apply during a Windows Shutdown, the next power on boot is delayed  
It does not happen in this situation:

I apply the patch via Windows Update, then do a shutdown to power off the unit, then power the laptop back
on, there is no issue. 
In all instances the patch is applied successfully based on what the Windows update history shows. The patch itself applies very quickly in all situations
To me it seems like a Restart after a Defender update is causing Defender to run a scan before allowing the laptop to boot. The laptop will just
stay on the Starting Windows screen with the 4 colored window for 45 minutes then boot normally. Typically running a Defender scan on the laptop takes about 45 minutes which is why I think the Windows Update\Restart sequence is triggering a scan. Normally
the ... Read more

More replies
Answer Match 51.24%

Hello to the BleepingComputer community,First of all I'm sorry I haven't finished some of the steps from the Preparation Guide. It's because these steps require a reboot (e.g. Step 6: Disable your CD Emulation Software - DeFogger will ask me to reboot the machine), and I have a bad feeling about the question if it is safe to reboot in my situation: I'm not sure if I have a type of malware which is ready to infect the BIOS - if it is so, then it could infect it much easier during the reboot process.- If there is a good way to find out what is the problem (and fix the BIOS threat part if it really is present) without rebooting / shutting down this PC, or at least without booting from this hard drive (which I feel is probably infected), then please tell me what should I do.- If you know a place / forum where I can get a specialized help for this (seemingly BIOS-malware related) situation, please tell me where I could go.- If there is no way to move forward, I'll go ahead and risk the reboot, and follow the other steps (steps 6 to 10) in the Preparation Guide, no problem.I kindly ask you to please read below the details of the problem as it occured to me, and the things I have tried so far.The PC is AMD Athlon 64 X2 Dual Core BE-2350 2.1GHz, Motherboard Biostar TA690G AM2 (with AWARD BIOS), 4GB RAM, 200GB SATA HDD, and an ASUS EAH4870 card added a few years ago.It's with WinXP SP3, AVG Free 2012, (standard) Windows Firewall, and it's behind a router.I ... Read more

A:BIOS virus/rootkit? - Unknown threat by AVG - "Bios Update\Award" folders, BS_Flash.sys, BIOS.sys and a dozen of m...

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. Click the Watch This Topic button at the top on the right.

Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.

Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

19 more replies
Answer Match 51.24%

 I am receiving this message when I run sp76205: The system BIOS update file (c:\SWSetup\SP76205\hpqflash\ROM.CAB) is missing or corrupt. The system BIOS will not be updated." SP76205 was just released in June 2016 and I noticed other user are experiencing the same issue with it. Please provide a fix BIOS update or explain how to run this current update...

More replies
Answer Match 50.82%

Okay, so I got the laptop from my aunt and she gave it to me broken, not booting up. So I wanna upgrade/downgrade the BIOS and probably will help with the issue. It booted yesterday, but it didn't today. I followed the instructions in this document at Recovering the notebook BIOS using an external device. I currently have a blank non-bootable USB, and whenever I extract the BIOS there, I get "Error IHIS! not support current BIOS" followed with "BIOS did not support InsydeFlash"  May anyone please help me to finally fix this devil. Any help would be appreciated.    And yes, It is on Windows 10 Pro 32 bit. I did a fresh clean install of it yesterday.

More replies
Answer Match 50.82%

Hi
I am running a home-constructed PC (started out life as a Dell, but i had to replace the motherboard and - well, one thing led to another).

Asus A8N-E running NVidia nForce4 with AMD processor
Windows XP professional
Zone Alarm security suite

It's been working fine for a couple of years with the odd hiccup but i transferred to Zone Alarm from McAfee about four months ago, and upgraded to IE7 - security and fire walls seem to be a big part of the problems i've had in the past so i thought i'd mention it.

last week i had the "application error with winlogon.exe" error on log on and I couldn't boot at all. I did a repair install from the XP disk which *Mostly* worked, but now I have no mouse. I am having to tab through the browswer fields to even post this message which is incredibly frustrating!

Odd symptoms:
* IE has rolled back to version 6 (I guess that might be a function of the repair install)
* In the device manager there is NO "mouse and other pointing devices" entry, let alone any mouse recorded under it
* In the control panel, the mouse hardware properties are completely blank (no way of updating driver or getting more inform,ation - selecting the buttons does nothing)
* In Regedit the particular registry key that Microsoft says I should be looking for (at http://support.microsoft.com/kb/142405) which is HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Class/Mouse doesn't even exist in the registr... Read more

A:Mouse Not Detected, bios problem? Can't even get INTO bios on boot

Most likely a bad mouse, or a bent mouse pin, or you are using one of those wireless mouse units, or a cheap usb mouse.

Mouse detection problems are exceedingly rare except for the above... never heard of a mouse being affected by a virus.

Uninstall Zone Alarm if you are using Internet Explorer 7.0 because you will always have problems otherwise.
 

3 more replies
Answer Match 49.98%

Hello,Having problems with computer slowing down. Slow scans, slow opening files, update problem with Microsoft automatic updates.I am having a security problem because the update for Microsoft Security Framework won't install an update.I have had a these problems since a virus infection. Problems with registry? I ran System Mechanic Mobile but it didn't help with security problem.ThanksHere is my Hijackthis Log:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 11:39:47 PM, on 10/29/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16544)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\Program Files\Intel\Wireless\Bin\EvtEng.exeC:\Program Files\Intel\Wireless\Bin\S24EvMon.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exeC:\Program Files\Grisoft\AVG Anti-Spyware 7.5\guard.exeC:\Program Files\Bonjour\mDNSResponder.exeC:\WINDOWS\eHome\ehRecvr.exeC:\WINDOWS\eHome\ehSched.exeC:\Program Files\Googl... Read more

A:Security Problem, Update Problem..slow Computer...

Welcome to the BleepingComputer HijackThis Logs and Analysis forum what-the? My name is Richie and i'll be helping you to fix your problems.If you have previously downloaded ComboFix,please delete that version now.Now download Combofix and save to your desktop:Note: It is important that it is saved directly to your desktop Close any open browsers. Double click on combofix.exe and follow the prompts. When it's finished it will produce a log. Post the entire contents of C:\ComboFix.txt into your next reply. Note: Do not mouseclick combofix's window while it's running. That may cause the program to freeze/hang. Do NOT post the ComboFix-quarantined-files.txt unless I ask.*NOTE*In case your Antivirus or any other realtime scanner is displaying an alert after you downloaded Combofix or while you use Combofix,please disable your scanner and redownload Combofix again.Some scanners may see some combofix related components as suspicious and block or delete them while there's nothing wrong with them.Also post a new Hijackthis log please.

1 more replies
Answer Match 49.56%

My Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers, I was told to stay away from this.

Thanks,
Jim

A:Samsung Bios software update for bios,update fails

Are you getting a direct link from the notification update? Can you post the link/site next time?

3 more replies
Answer Match 49.14%

Hey guys,

I have a WinNT4 (SP6) workgroup server that I have been planning an expansion project for quite some time now. The division that uses the server is not a high budget division so the decision to expand into the realm of IDE vs. SCSI was not hard to conquer. IDE is the only way they could afford to expand.

So, I got them an IDE ATA 133 RAID Controller Card and a couple 40gig drives. Tested it on a Win98 machine so I knew how to configure and install (generally).

Then I go to install the setup into the server. The direction said to plug the card in, then load the drivers. This caused the machine to go into a rebooting loop. So I took the card out, and loaded the drivers first then stuck the card back in. Now the server will boot up fine with the card in it, but when I hook a drive to the card I am caught back in the reboot loop.

The machien goes to the point where the takes over and I get the following error:

STOP issued, error: C0000143
DISPLAY_DRIVER.DLL not found.

Starting error log. Log may be viewed through the event viewer.

Starting physical memory dump.
(counter starts at 1 and goes to 100)
When the memory dump counter reaches 100, the system reboots. This cycle will continue as long as there is an IDE drive attached to the card. I have printed and examined diagnostic printouts from the server. DISPLAY_DRIVER.DLL is not even listed as a driver in the system.

Please let me know if you can help. I am short on time to trouble shoot this one.

tha... Read more

A:WIN NT4 (SP6) reboot problem

Here are some articles I took off of the MSKB. These articles describe the problem, but not the correct circumstances. Just hoping to job some peoples memories.

http://support.microsoft.com/default.aspx?scid=kb;EN-US;165748
http://support.microsoft.com/default.aspx?scid=kb;EN-US;186674
http://support.microsoft.com/default.aspx?scid=kb;EN-US;162577
http://support.microsoft.com/default.aspx?scid=kb;EN-US;170397

I am not sure that any of the fixes described in these articles will work, since the circumstances are different.
 

2 more replies
Answer Match 49.14%

Please Help!!!!
My computer keeps crashing. I have received an error message from Mircosoft titled "Error Caused By Device Driver"
After an explanation, the actual error is hyperlinked with the folowing: "0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER"

Can anyone give me a simple fix for this problem? (if there is such thing)
These crashed never happen with me only with my son when he is making cd's or something. Then it just continues to get so far when it reboots and then shuts down again.

Hope someone can help me.
Thank You in advance for any advice and support in this matter.
Sincerely, Evie
 

A:Reboot Problem

9 more replies
Answer Match 49.14%

Every time I start the computer or restart it automatically launches internet explorer and goes to a porno website (always the same one). When I check my home page (Yahoo) it has not changed. I don't know how to get this to stop. I have run Norton antivirus but nothing changes. I'm very frustrated. Can anyone help?

A:xp reboot problem

You have been hijacked...

Please download Ad-aware SE and install it if you don't have it already. Make sure it's the newest version and check for any updates before running it. Also go here to get the plug-in for fixing VX2 variants. To run this tool, go into Ad-aware->Add-ons and select VX2 Cleaner. Then click Run Tool and OK to start it. If it's clean, it will say Status System Clean. Otherwise, you will have to click on the Clean button to remove the VX2 infection. Also make sure to customize the settings in Ad-aware for better scan results. Run the scan and fix everything that it finds.

Download and install Spybot S&D. Run Spybot and click on the 'Search for Updates' button. Install any updates that are available. Next click on the 'Check for Problems' button. Let it run the scan. If it finds something, check all those in RED and hit the Fix Selected Problems button. Exit Spybot. If you keep getting the DSO Exploit entries, even after you updated Windows and fixed them, then download the Spybot DSO Exploit Fix and install it over the current Spybot installation.

If the problem remains download HijackThis - this program will help us determine if there are any spyware/malware on your computer. Create a folder at C:\HJT and move HijackThis.exe there. Double click on the program to run it.

1. If it gives you an intro screen, just choose 'Do a system scan and save a logfile'.
2. If you don't get the intro screen, just hit Scan and then cli... Read more

2 more replies
Answer Match 49.14%

i have a media center computer and i just restored the computer so media center works. i just set up the TV part of the program and whenever i go to change the channels, or even the guide, it restarts. what can i do
 

More replies
Answer Match 49.14%

hello guys i try to reboot my pc and i got this error:


so i did some resarch and saw that i got a problem in a service that called "Virtul disk " and i need to start that service but when i try to open the service i got this error : "error 1053 the service did not respond to the start or control request in a timely fashion windows 7"

i did some resarch again and found i need to start the service that called "Plug and Play" but when i try to start it i got the same error as before.

any help how to solve it?

thx for the helppers.

A:Problem when i try to reboot my pc

Hi there,

Is your computer a desktop or a laptop computer? What is the brand/model of your computer? Please provide the specs of your computer when you can. By knowing the computer specs, we would definitely be able to troubleshoot your computer issue more efficiently.

Try and see if your computer is able to at least boot into "safe mode". When was the last time your computer was able to boot into the Windows OS successfully?

5 more replies
Answer Match 49.14%

Hey everyone.
Whenever i try to change my computer resolution back to 1024x768 my computer reboots out of nowhere, so it wont let me change my resolution.
And whenever i try play online games, for example, gunbound, guildwars, etc. my computer reboots as soon as the game opens too..
it's been like this for a while.
So does anyone know how to fix my problem?
 

A:Reboot problem.

Welcome to TSG....

You can try updating the video display drivers for the computer first. And please post some computer system specs if possible.
 

3 more replies
Answer Match 49.14%

My laptop was working, but suddenly stopped working. I turned off the laptop and turned it on, but it has started giving message

?Reboot and Select proper Boot device Or Insert Boot Media in selected Boot device and press a key?

I have checked Boot Device Priority, it was showing 1st Boot Device to Network, which I have changed to Hard Drive, but still same message. When I switch on, it makes continue weird noise.

I have allot of work and software on this laptop and do not want to loose it using recovery dvd.

I copied ISO file, when I ran that file on the computer, I received following message:

?A Problem has been detected and windows has been shut down to prevent damage to your computer
If this is the first time you?ve seen this stop error screen, restart your computer. If this screen appears again, follow these steps;
Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical information:
*** STOP: 0x0000007E (0xC0000005, 0xF748E0BF, 0xF78DA208, 0xF78D9F08)
*** pci-sys ? Address F748E0BF base at F7487000, DateStamp 3b7d855c?

Please advice me how to rectify ... Read more

A:Reboot Problem

Sometimes...when the CMOS battery starts to fail..it will produce all sorts of strange effects, starting with the clock and various STOP errors, but I've also seen such change my CMOS/BIOS settings.I would try replacing the CMOS battery, CMOS Battery Replacement - http://www.liverepair.com/encyclopedia/art...cmosreplace.asp.Louis

16 more replies
Answer Match 49.14%

I have a Lenovo 450K, 2 T HD 12 G Ram, i7 Processor,Win 8.1. The problem I have with this machine is that when rebooting it take up to 4-5 reboots

to restart. This has happened even after re-storing to factory. Any ideas greatly appreciated.
 

A:Reboot Problem

6 more replies
Answer Match 49.14%

Everytime I reboot I get a small yellow notice on the opening screen that says the following:

""You have files waiting to be written to the CD.""

A:Reboot Problem

Sorry that message was sent prematurely.

When I ckick this yellow waring it shows a folder that has no files in it. How do I eliminate this annoyong warning.
Thanks

2 more replies
Answer Match 49.14%

I thought this was normal windows updated I thought wrong to make a long story short: My computer wont shut off it keeps rebooting to a screen that says 3 of 3 updates o% do not shut off computer then never gets to even 1% then reboots and comes back to the same screen. I cant even get to the gateway destructive recovery to wipe it all out and start over. Any ideas?

A:sp2 reboot problem

looks like your only option is to do a "REPAIR INSTALL" from your vista DVD not recovery but REPAIR, and if that does not work a complete REINSTALL. and don't upgrade to SP2 again.

1 more replies
Answer Match 49.14%

I just put in a LiteOn sata DVD burner. I'm running an XP Pro with 1 GB mem, and a 250GB HDD, but I'm having a boot problem. It gets up to the XP Logo page and then heboots or it sends me to the options page for normal reboot, or Safe Mode (which doesn't work).

Any suggestions would be greatly appreciated.

Thanks,

Xico
 

A:Reboot Problem

16 more replies
Answer Match 49.14%

A friend of mine did a reformat on his C drive & installed a fresh copy of Win XP (sp2)... After he did windows update & restarted his computer, the PC kept rebooting after the "Windows XP" screen. It can't even boot into safe mode...
Please help...
Thx..

A:Reboot Problem(can't go into Win XP)

Hi

You could try booting up the Windows CD and running a "repair" install to see if that helps.

But, personally I would download the diagnostic/utility software from the manufacturer of hard drive's website and zero the drive (low level format) and start again. This will wipe absolutely everything off the drive.

When it gets to installing the drivers do the mainboard/chipset drivers first, then video, and gradually build up the drivers with a restart between each one to see if this is a driver clash. I would recommend using known good drivers (i.e. previously ran ok) first, just to get things up and running and then update later.

Peter

3 more replies