I notice under my WiFi connection properties there is a tick box to use Intel Connection Settings and a Configure button. What are the advantages (if any) of using this and what are the recommended settings? I'm only sing 2.4GHz WiFi at present.
More repliesDear Friendz, I am using Lenovo Y460 laptop.I was able to switch on WiFi earlier but it is not working now.I think it happened earlier also but somehow by updating relevant drivers the issue fixed (did not remember exactly). Now since few days in my system tray ?Intel ®My WiFi Technology? icon is there and when I click/right click on it all the options are grayed out due to which I could not enable WiFi. But one option ?Open Intel® My WiFi Utility? is allowed to select and when I opened, the profiles option is again grayed out and it is displaying message that ?Network Adapter Not Found?.Then I went to Control Panel---->Devices--->Device Manager--->Network Adapter--->Intel(R) WiFi Link 1000 BGN---->and updated the drivers here. Restarted the machine but issue did not fix. Then deleted that Intel(R) WiFi Link 1000 BGN from Network Adapters and deleted drivers (C---->Program Files--->Intel---->WiFi---->Drivers)?downloaded from internet and uploaded drivers again (C---->Program Files--->Intel---->WiFi---->Drivers) then restarted the machine again no use. I also updated S32 and S64 in Win7 as I could see one folder name called drivers in C drive.( C---->Drivers--->Intel Wireless WiFi Link Driver--->Win7--->S32, S34 Folders) I am now totally confused?..Lenovo support does not want to help and they are telling to sign up for extending warranty otherwise asking to take this machine to... Read more
hi K. Sharath,
From this microsoft article, it looks like the Intel My WiFi technology is not compatible with the Intel(R) WiFi Link 1000 BGN card and is only applicable to certain types of Intel Wi-FI adapters.
To turn ON the Wi-Fi capability of the Lenovo Y460, you will need to:
1. Slide the physical wi-fi switch to the ON position
- Link to picture
2. Press Fn+F5 to enable the wireless card (ensure Current Status is set to "ON")
- Link to picture
Note:
The Lenovo Energy Management Driver must be installed for the function keys to work
3. If same problem, boot into the BIOS by pressing F2 on startup and ensure that the WLAN Device is Enabled.
- Link to picture
Let me know how it goes.
Regards
I'm pretty confused, and I'm hoping someone here can help me. Every time I restart/turn on the computer, the wireless adapter turns on for a couple of seconds then shuts back off.
Then I have to manually press the adapter button for it to turn back on. I reinstalled my Windows and that didnt fix it. The wireless works as it should after I turn it back on.
I checked the power settings, in the properties for the adapter, And i have set it to always be on.
Does anyone know why this might be happening and what I can do to fix it?
I have a "Intel(R) WiFi Link 5300 AGN"
Looks like a Windows update solved this...
1 more repliesHello all, I am having issue enabling the 802.11n settings for my WiFi card that is supposed to have N grade (300 Mbps) capabilities. The card standards are 802.11b/g/n. According to Intel's white sheet for the Intel? Centrino? Wireless-N 1000, it should be able to utilize the N grade WiFi speed capabilities. However, I'm not seeing the setting available in the Advanced settings of the driver. The attached screenshot shows that there are only b & g settings available. This is most inconvenient because my internet speed was just upgraded to 105 Mbps & I'd like to at least enjoy a little. I'm not getting anything above 50 Mbps. Is anyone else having this issue?
It's the same for ALL Intel WiFi products. Wireless Mode for Intel is basically using ABG, BG, AG, A, G, and B modes only. (see screenshot)
For Centrino series, there's a menu called "802.11n mode" and from there you can use it to enable or disable WiFi N
For 7260 series, it is called "HT mode" and if you disable that, the NIC will refuse to connect to N network and will operate on G or A.
FYI, there's a difference between what Windows say on the connection rate and the actual rate. The actual rate depends on RF environment, walls between the computer, antenna gain, and power management. The best actual speed you can get is around 40 - 50 % of the speed reported by Windows.
Getting an actual speed of 50 Mbps means that you're already connected to WiFi N. I might guess that the connection rate reported by Windows is probably 144 Mbps. 50 Mbps is close to the maximum actual throughput of 70 - 75 Mbps. You can change the settings on your router to "force" 40 MHz channel width on the 2.4 GHz band and then set the "802.11 Channel width for 2.4 GHz to" "Auto" to allow the adapter to use 40 MHz channel width.
If successful, this should give you 300 Mbps reported connection rate and around 130 - 180 Mbps of actual speed. Therefore, your 100+ Mbps internet speed should be covered provided that your environment has little to none RF interference and the laptop is within line of sight of the router.
Hi,
i just bought a new laptop lenovo z510 with windows 8, it has issues connecting with wifi. it gives the following error
"the settings saved on this computer do not match the requirements of the network".
i tried looking for it over the net still all the solutions are for windows 7 or vista, i go to control panel>network and Internet> network and sharing centre>
i am trying everything possible to sort out this issue, kindly help me in this, do consider it is windows 8 and it does not have manage wireless networks option.
when i switch off my wifi router for 10-15 sec and switch it on then for some time the net connects but after sometime same issue.
also i have tried forget the network and again select it still nothing works.
Kindly help, Thanks you.
Originally Posted by k12
Hi,
i just bought a new laptop lenovo z510 with windows 8, it has issues connecting with wifi. it gives the following error
"the settings saved on this computer do not match the requirements of the network".
i tried looking for it over the net still all the solutions are for windows 7 or vista, i go to control panel>network and Internet> network and sharing centre>
i am trying everything possible to sort out this issue, kindly help me in this, do consider it is windows 8 and it does not have manage wireless networks option.
when i switch off my wifi router for 10-15 sec and switch it on then for some time the net connects but after sometime same issue.
also i have tried forget the network and again select it still nothing works.
Kindly help, Thanks you.
Have you tried to update "Windows Updates" this system using a wired connection?
Which make/model router are you using for this connection?
I have an Insignia 8" tablet that I use to listen to an internet radio station. WiFi connection to my 2Wire 3801HGV router. I have it powered by the AC charger. I have the display to turn off after 5 minutes, never to go into sleep mode when powered by AC. After the 5 minutes the display is turned off, the music continues as expected and will continue for hours. But if I try to do anything I loose my WiFi.
Right after the screen is shut off I can enable it again with a stroke. Then the music stops. I no longer have internet access.
Network settings says I still am connected but somewhere the connection is broken. I disconnect from my router and then try to reconnect and it will not. I get, Checking Network Requirements, Can't connect to this Network. The only way I have been able to get connected is to do a restart.
Any ideas on how to solve this problem? I have not found any settings that have been useful. All it should be doing is shutting off the screen. Not go into any other sleep or power down state.
Hi Rudy,
Welcome to the forums, go to Device manager, expand Network adapters, right click Wi-Fi, Properties, go to Power management tab, untick "Allow the computer to turn off......" and reboot, HTH.
hi
my daughter has a toshiba l300d on vista, the other day it kept freezing really bad so i put it back to factory settings as ive done a couple of times before,it went through every stage as it should do except it wont connect to our wifi connection,it wont even pick the vonnection up. i have checked all the usual settings and everything seems to be as it should.my daughter is now getting very stroppy being without her laptop(she is 14 and facebook is her life lol).
please can someone help - thanks
Make sure you have the wireless adapter enabled, it's usually switch on a Toshiba, though it could be a function key sequence.
Hold the Windows key and press R, then type devmgmt.msc
Please respond to all the following steps.
Under Network adapters, please tell me all the devices listed.
Are there any devices under Network adapters that have a red x displayed?
Also, are there any devices anywhere in the Device Manager display with yellow ? or ! displayed?
It would be best if you could post a screen shot of Device Manager with the Network adapters and Other devices sections expanded.
To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file. To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.
I'd like to see this as well.
Download and run this Xirrus Wi-Fi Inspector, click the Networks link on the upper left and paste a screen shot of that screen here. Note that this application requires NET Framework to run. If you get an error about a missing function, download and install NET Framework. For machines with no Internet connection, download this NET Framework 3.5 Full Package on another machine and transfer it with removable media to the problem machine.
To post a screen shot of the active window, hold the Alt key and press the PrtSc... Read more
I upgraded my friends HP laptop to Windows 10. The issue now is I can't enable Wifi. The card is recognized correctly in Device manager and no issues is found with it. It looks like it is fine. However in the Network Settings WLAN is set to "Off" and when I try to turn it on it always jumps right back to off. eg. I can't enable it.
HP is now help as they clearly state any laptop bought prior to specific date in 2013 will not get any driver updates from their side for windows 10. (Guys, never buy HP again please...). And updating through device manager only tells me it's the newest driver available.
The Wifi card i Broadcom 4313GN card. I searched for win 10 drivers but did not find anything.They only offer linux drivers on their homepage...
So can anyone either provide a solution to the issue or link to a win 1' driver for this wifi card?
I had a similar issue were I was stuck in Aeroplane mode on a cleanly installed W10. Turned out I had to uninstall it from the HID's in Device manager. It's worth checking that he's not stuck in it too. Search for drivers in Windows 7, from the HP website and you'll most likely resolve the issue.
0 more repliesMy laptop is Sony VAIO sve 1711 q1eb my adaptor atheros ar 9485. the drivers are reinstalled normally , the wireless service is enabled , the adaptor is enabled but I can't see any available networks (my router is OK I checked it ) and when I go to mobility centre the turn on wireless button is grayed out and my laptop doesn't have any physical WiFi button or any shortcut
And I am sure I did not install any programmes or something
Was it working before? When did this problem start?
4 more repliesHi Guys,
This is Viral. I am using an Acer laptop model ASPIRE 4736 since the last five years. There haven't been much issues with it. except for the battery and thats it. But recently, since last two weeks I noticed that my Wifi would stop blinking after sometime after I start my laptop and then it wouldn't work even when I try to turn on and turn off the Wifi switch(it doesn't respond anything). I tried searching the net for this issue using my office laptop and found that a system restore would help to solve this issue. Since I remembered that I updated Java as well as there was this ad software which got installed and I had unistalled it. So I did a system restore and then when I opened the device manager, I am not able to see intel r wifi link 5100 driver on it. I tried restarting my laptop and did everything and couldn't find the driver(it was there before the system restore). But later on the same day, the driver got installed automatically and the WiFi started working but only for a couple of minutes after the restart and then it stopped. So I did the system restore again to the date when everything was working perfectly and when i did that, again my intel r wifi link 5100 driver is not shown on the device manager(network adapters). I don't if it would automatically get installed or not but its sure that the WiFi issue still be there. So can you please help with this issue?
1. Help me get the intel r wifi link 5100 driver back
2. Help me the solve the WiFi issue... Read more
Select Model, Select Operating System, Download your Drivers
There is also a hardware detection tool to assist you.
http://us.acer.com/ac/en/US/content/drivers
If the software is listed in add/remove programs; Uninstall it.
If the device is listed in device manager; uninstall it.
I need to turn on intel virtulization but for some reason when i go into my bios, the option to turn it on is blurred. is there any solution to enable all my option from not being blurred?
I need to enable Intel VT-x in order to run VMWare on my laptop. I cannot find where to enable it in my BIOS and I was wondering if there is any alternate way I can turn it on. I am using a Lenovo Thinkpad W540 and it is running on Windows 10.
It's under Config - > CPU
After enabling you must do a full shutdown and and VMWare will align itself on start.
I am trying a run a virtual machine through VMWare. It fails saying the below reason, Intel VT-x might be disabled if it has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting.(1) Verify that the BIOS/firmware settings enable Intel VT-x and disable 'trusted execution.'(2) Power-cycle the host if either of these BIOS/firmware settings have been changed.(3) Power-cycle the host if you have not done so since installing VMware Player.(4) Update the host's BIOS/firmware to the latest version. How to enable the Intel VT/x in BIOS. PLease let me know.
When requesting assistance, please provide the complete model name and product number (p/n) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue. The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please see How Do I Find My Model Number or Product Number? for more assistance locating this information. DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review. If you have any further questions, please don't hesitate to ask. Please click the White KUDOS "Thumbs Up" to show your appreciation
4 more repliesive see this picture around he enabled aero View image: Aero
Quote: Originally Posted by coder099
ive see this picture around he enabled aero View image: Aero
According to Intel there are no win 7 drivers for the 915.
howto enable Aero using Intel 915GM, Intel Graphics media Accelerator - Microsoft Answers
In VMware, I am getting error message about enabling Intel VT-x setting in bios ? I have no idea how to go to BIOS in windows 8 and how to enable it ?
Could you please guide me how to enable VT-x in windows 8 ?
Please see:
Enabling Intel VT-x and AMD-V virtualization hardware extensions in BIOSCarey Frisch
I am trying to use the VMware player on my laptop but I get this error message where it asks me to enable intel vt-x on my laptop.
http://community.acer.com/t5/Knowledge-Base/Hyper-V-and-VT-x-BIOS-support/ta-p/380175
1 more repliesthe BIOS show "Virtualization" is disabled and Notes: to enable it requires a "Full BIOS reset Question how to do this? Thanks
More replieshey,
i have been trying to enable intel quick sync for "action mirillis" gaming recorder for mp4, since there is no original and 1080p option available for me in that tab, i have tried enabling it through bios but there was no change still..any advices..??
thanks lot
I'm trying to enable Intel Quick Sync for video editing. My new desktop has the built in Intel 530 GPU which supports Quick Sync, and I've gotten it enabled via the BIOS, but I can't seem to get Quick Sync working. When I attempted to load the latest Intel Drivers, I got an error message that it couldn't load because the Computer Manufacturer Driver was installed. I attempted to contact HP Support, but was told that this was beyond their responsibility (!?) and that I'd have to pay for support to get any further information.
@R_DOC?, Hello and thanks for posting on the HP support forums. Here is a link to help with enabling Intel Quick Synch. Intel® Quick Sync Video If it was working for you in the past and something has changed you may try doing a system restore back before the problem started. This will remove any configuration change. HP PCs - Using Microsoft System Restore (Windows 7) Please let me know how things go. Thanks again for posting and have a great day.
2 more repliesHi Guys, Does anyone know how to enable Intel VT-X on HP Pavilion HP Pavilion ab032tx? I can't see the setting in the BIOS on computer, actualy there is very little in the bios. Also, I am unable to find out the option to enable Intel Virtualization. Any help would be great Regards,Sahibdeep
More repliesI want to Enable Intel Virtualization Technology (vt-x) on my HP Pavilion 23-b026in All-in-One Desktop PC. But I'm unable to find the option in my BIOS. My processor is capable for Virtualization Technology but I'm unable to find the option to enable it on my PC. Can you please help.
Solved!
View Solution.
Hi, Rapidly tapping the ESC key after power on should get you to Startup Menu and from there you can select Computer Setup (bios). If you can't get to the Startup memu using the ESC key then you will need to take a longer route to get into the UEFI settings. Review this procedure. The below image is reflective for the Leeds motherboard in your PC. There is not a lot of differences between the below image and that which Paul had posted. You will need to change the Disable to Enable and then save the settings. The other changes will require Windows 8 Pro or higher and also to enable the function under Turn Windows Features On or Off.
10 more repliesI need to enable Intel V-x in Windows 10 ,and I have followed the steps to go to the UEFI but when I go to the UEFI there is only BIOS setup that does not list the Intel processor. Is there a way to bypass the UEFI and go straight to BIOS files or do I need to go back to Windows 8.1?
More repliesI have a new m700 with an i7 6700 with Intel 530 Graphics. I have attempted several different configurations but I cannot seem to get it to enable the third monitor. (all 1080p monitors) The monitor shows up in the display settings but as "disconnect this display" and any attempts to extend the desktop to it cause one of the other two to be disabled. ??? I am using a Displayport to 3xHDMI adaptor to attenpt this. However I have tried to use a DP to HDMI/VGA adapter as well and it will not allow more than two at once. Even when I add a VGA monitor (connected to the Motherboard) on top of it and it detects all 4 monitors it still tells me that two are disabled and wont allow me to enable extending the destop to any of them. I have used this adapter on two other computers with Radeon and Nvidia graphics without issue. I have updated the intel graphics several times and enabled IGD and Multiple Display Support in the BIOS. None of these things work. Please help! a big part of convincing my boss to order this computer was support for 3 monitors.
More repliesThis may be an unusual request... I came across an Elitebook 8770W at the office that someone had bought and I think removed the nVidia K5000M GPU that was in it. It had never been started up either. I booted it and it went through setup and it works for the most part - but none of the external graphics (DisplayPort/VGA) ports work and the driver that loads is "generic vga" by Microsoft. I run speccy and it says it has a GT216 GPU and the nVidia GPU identifier says it has a NVS 3100M. Not sure either of these are right - and in any case I can't find an HP/nVidia driver that will load and the performance tool rate graphics as a 1.0. I'd like to enable the Intel HD4000 graphics and get a driver for that. Speccy says the CPU is an i-7 3740QM so i think it should have that built in GPU, right ? Is there a switch on the motherboard or something in the BIOS or am looking in the worng place for the drivers ?
@SEAS89? Install these 3. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5257515&swItemId=ob_124514_1&swEnvOid=405... http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5257515&swItemId=ob_111367_1&swEnvOid=405... http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5257515&swItemId=ob_156890_1&swEnvOid=405... REO
3 more repliesI am unable to enable Virtualization using BIOs settings in HP 630 Notebook as the option itself is not there in security tab or system configuration tab. Please help. [email protected]
More repliesShould I Enable Software Processing (Vertex Processing) to have good fps when playing games? and what is the use of this?
You can but it likely won't help much. Unfortunately that Intel GUP just can't handle much in the way of games,
Intel Graphics Media Accelerator 4500MHD (GMA X4500MHD) - Notebookcheck.net Tech
Hello Ive not been able to enable my WiFi since sunday, ive tryed many different options as suggested in troubleshooters including; Restoring the BIOS, Restroing to a time were it did work, reinstalling the WiFi driver ETC. I don't know what else to try and now my warrenty is said on the website to not be valid and i ahve to dispute this. Any help out there is appiciated Spilogs
You have made it virtually impossible to help you because you have not identified your HP notebook, installed operating system nor the wifi adapter. Help us to help you by doing all three and we will do our best to assist you with your wifi problem.
2 more repliesI recently gave my old rig to my wife to replace her laptop. Specs are in the sig. This box has been running primarily wired but the Wifi is failing me now. I have tried to enable my wireless connection but its greyed out. I have tried updating drivers with the right click method. I even tried the WLAN Auto Config fix and still no dice. Any other suggestions or maybe its time for an I7 NUC for the MRS.
It is disabled in the BIOS? Is it disabled via the NICs software?
hi, i just purchased a new laptop today and it has windows vista basic on it. iam not quiet familiar with it yet. it is a FUJITSU SIEMENS ESPRIMO-V5535 and has wifi enabled. when i try to search for network or check my cousing router when i am their house it says you need to enable the wireless. it says there is a switch somewhere or function key. firstly i cn't find any switch unless i am blind and however there is a function on f2 there is a wireless sign i click on it nothing happens though. i know it has drivers installed because i checked device manager and cause it is brand new it did it during setup. additional i installed some wan drivers to make sure but no luck.
can anyone ple help i know i will the problem but i just want to solve it now i have a headache lol.
thanks
farad
Hi
I want to turn on my PC automatically during late hours so that I can do some downloads and maintenance works on my PC automatically!!
But I cant find an option for RTC alarm enabling in this BIOS!!
Whats wrong with this Mobo?
Will any one help me?
I'm trying to update the bois to R0112N0 in order to enable intel vt so that I may run virtual xp mode in windows 7. However I'm having trouble updating the bois When I download the utility and install it first it gives me prompt that reads "Cannot read system information" after that it says installation succesfull and then windows asks me to reinstall using recommened setting, after I do that it says that this update is made only to run on windows vista. So I'm kinda stuck. Is there anyway around this? I really need to enable the vt in my bois. for any one intrested on how to enable it here is a good tutorial I found
welcome to seven forums.
That os compatibility thing is probably there to insure that nothing goes wrong. Im sorry, but it seems like you will need to install vista, update bios, and then install windows 7 again. You can install windows vista on a separate partition, install the bios, and boot from a dvd to delete the vista partition. Afterwards, use the windows 7 repair dvd to swap the bootloader back to windows 7
Hi,
I have a legacy intel pc thats chugging along pretty well. I currently dont have the option to boot from USB. However it seems a later version of the bios solves the problem but I wanted advice before I do anything and also pointers on how to update, if thats the way to go.
Motherboard: Intel D815EEA
BIOS:EA81510A.86A.0031.P07
I downloaded a document from intel which seems to suggest version EA81510A.86A.0051.P11.0051
and above have USB boot enabled from the BIOS.
Should I upgrade and how do i do it?
TIA,
raj
If it's an OEM (brand name) PC, you should only use BIOS updates supplied by that manufacturer (via their website), as those direct from Intel may not be the right one for that board, so you could end up with a non-working PC and no easy way to fix it.
The problem happend after i ..
right click on desktop > Graphic option > first thing that i cant remember what is it ..
Then the screen suddenly blank ! (The system is still running)..
and i startup with safe mode..it has no problem..
I disabled intel hd grahics 3000 device on safe mode..
and it work's , my screen is not blank anymore..
but without the intel hd grahics i facing many problem like,
cant adjust screen's brightness..
what i should do? maybe reset the setting of intel hd grahics ?
but how..if i enable the intel hd grahics device..it becomes blank again..
someone help me
hp pavilion g series
Microsoft Window 8.1 pro
processor : intel(R) core(TM) i5-2410m cpu
system type:64-bit operating system, x64-based processor
Hi, Welcome to EightForums,
In order to help resolve your issue can you please advise what the Make/Model of your computer/laptops is and system specs.
Cheers,
Jamie
How do i enable onboard intel GMA 3100 with nvidia 8600gt
its showing me incompatible display adapter disabled when i installed the intel driver
it works fine in xp
when i read some forms they say that its a prob with WDDM
plz guys tell me how can i make them both work together
intel quad core 9450
4GB RAM
intel gma 3100 & nvidia 8600gt
1 TB HDD
I didn't think you could. when you install the driver for the new 8600GT, it automatically disables the Onboard graphics. thats what I understood.
15 more repliesSir,I bought my new hp laptop pavilion au006tx with 4gb nvidia 940MX graphic card.But then also when I play games it lags like hell and which I could play smoothly on my 4 year old laptop with ati radeon 5450. Sir please suggest me what to do so that I could play all the games .
More repliesHello,
I am currently trying to install Docker toolbox on my HP 4530s (Windows 10 pro) machine.
I have tried to access the UEFI firmware via the path:
[ Windows desktop > Settings > update & Security > Recovery > Advanced Startup (Restart Now) > Troubleshoot > Advanced options > ..... .
I was supposed to see the < UEFI Firmware settings> here, but rather, i get a "Return to previous known build" option.
I then tried to access my BIOS but I cannot remember my BIOS password from 4 years ago.
i will really need the best of help i can get on recovering the password or more specifically - ensuring I enable my Intel VT-x.
Serial number - [Personal Information Removed]
Model number - A7K05UT#ABA
thanks.
Ethel. Contact HP and they should be able to send you a customized SMC.bin file which you can use at boot to reset the password. http://welcome.hp.com/country/w1/en/contact_us.html When talking to the HP rep ask them to escalate your service request. REO
1 more repliesHey all, I'm trying to set up dual monitors on my machine. I've got an ATI X300 Radeon card, and I'm trying to enable the onboard video card on the mobo for the other output. I've done it this way on other systems, so I'm hoping it's doable in this case, but I can't seem to get the onboard card enabled.
It's an Intel D915GSN board, which I've been unable to find a manual for. Intel's site has documentation for 7 different 915G-- boards, but none of them are "SN."
Anyone know offhand how to do this, or where I can find a manual?
Thanks
Scott
Is this from a Gateway computer? If so refer to the Gateway manual for yoru system.
But many of these don't allow you chose to enable both at the same time.
The solution to this is to run both monitors off the add-in video card. Most X300's support dual monitors but you may need a DVI to analog VGA convertor for the card.
Hi All,
I have a Satellite Pro P100 P/N PSPA4E-00X00HEN on which I have just installed Windows 7 RC.
I desperately need to run Virtual PC 2007 (other versions won't work) on it but it wants Assisted-Hardware Virtualization enables in the BIOS (Phoenix Technologies V4.70).
I have just updated to the latest BIOS version but it doesn't have the facility to enable AHV in it.
I have checked the processor specifications and it does have the Intel Virtualization Technology facility.
From what I have read up on the internet, although the Processor is capable the manufacturers on the computers/notebooks, in this case Toshiba, program the BIOS to their liking which will either enable or disable certain features.
What I would like to find out is, is there going to be another upgrade to enable Virtualization or is there another way to do it.
Many thanks in advance.
Hi
From my knowledge the usage of Virtual PC 2007 does not require a virtual technology supported by hardware (CPU).
I used Virtual PC and Virtual Machine on PC without the VT capability.
But you are right. The Intel CORE2 DUO T7400(2.16GHZ) CPU supports the VT
http://ark.intel.com/cpu.aspx?groupId=27256
Unfortunately from my knowledge the P100 BIOS does not support the option to enable/disable the VT.
I have a Dell Inspiron 13 - P57G.
One of the most important features of the offered by Intel Skylake mobile CPUs series is Speed Shift, which improves CPU battery and speed performance. However, this featured came disabled on this model current latest BIOS (version 1.08). And there is no setting that allows to enable it. Other laptop manufacturers have this feature enabled in their current line of laptops. Dell support, please provide a BIOS that has this feature enabled or switchable.
Thank you.
Hello! So i looked up Inspiron 13 P57G and it states its an Inspiron 7347 which came with 4th Gen Intel 4xxx series i3 and i5 processors, not skylake which is 6th gen 6xxx series. Is there a model number on the bottom of your laptop?
1 more repliesI have lenovo G580 INTEL PENTIUM ([email protected] 2.10GHz) and I have also Windows7. I want to enable WIFI to do internet. How to do it?
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.
getitforyou wrote:
I have lenovo G580 INTEL PENTIUM ([email protected] 2.10GHz) and I have also Windows7. I want to enable WIFI to do internet. How to do it?
Provided you have a WiFi adapter installed in your notebook, you will need to turn on WiFi in your notebook then sign on to an available wireless network. I suggest downloading your user manual and reading up on this subject for more information. If you do not see any wireless networks, you may need to purchase a Wireless Router from your internet service provider. If you do not have a WiFi card in your computer you will need to contact Lenovo directly to purchase a compatible card for your specific notebook.
Also - make sure you have a good anti virus software suite installed before you go online.
Good luck.
CB
My computer does not detect wifi signals, in fact does not show anything about the wifi, i wonder if there is any way to activate or need something specific
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.
Hi Ruben_Palacios ,
Welcome to the Community Forums.
First to make sure that Airplane mode (page 6) is not enabled, there is a hotkey on top of the keyboard with an icon of a plane. Check if that would enable your wifi .
Else you can try to set the default of the BIOS ,
Access the BIOS by turning off the laptop and then use the Novo button (item2 page 9) on the left side next to power to turn it on. Novo menu would appear to offer BIOS set up , F9 to load defaults F10 to save and exit .
Load up windows and check if there is a wifi icon at the base of the screen.
Check also on device manager if there is any yellow mark or black down arrow to indicate any need to reinstall drivers from the support website.
Update us how it goes.
Regards
Hello, today I was messing around with "Network and sharing Center" when I accidentally clicked something along the lines of 'disable' beside WiFi. Now it is completely gone and I have no idea how to get it back, I have done extensive Google-ing but couldn't find an answer. I am now using a wired ethernet cable instead but I need my wifi back as soon as possible.
Control Panel - Network and Internet - Network and Sharing Center
View your active networks
Acces Type: Internet
Homegroup: Joined
Connections: Ethernet *WIFI SHOULD BE HERE*
If anyone could help me on getting it back I would be extremely appreciative, thank you very much.
and welcome to the Forum
Please post a screenshot of Device Manager with the Network Adaptor group expanded. . see the link in my signature for how.
How do I get into Windows Device Manager?
I have a Dell D400, uses the Intel GM 855 and I'm wondering if can do any hacks to forcibly enable Aero?
Any help would be great, thanks.
Oh, on a side note, I found the little hack for Vista on how you enable it but it doesn't seem to be working for me in Windows 7.
Maybe there is another method?
Quote: Originally Posted by kdogg
I have a Dell D400, uses the Intel GM 855 and I'm wondering if can do any hacks to forcibly enable Aero?
Any help would be great, thanks.
Oh, on a side note, I found the little hack for Vista on how you enable it but it doesn't seem to be working for me in Windows 7.
Maybe there is another method?
Im assuming you have the latest intel driver? I have a dell as well and the dell driver doesn't work. Are you 32bit or 64?
Hi to all seven forums.
hope you all will be fine. my friend facing problem with windows seven ultimate Aero color scheme, He could not enable the Aero, he had a intel PC which built in graphic is 128mb.
any solution will be highly appreciated..
if some thing want more information, I ll ask him..
Hi,
Maybe this tutorial will help - Aero Peek - Turn On or Off
The 'Warning' section tells you the minimum requirements
Regards,
JDobbsy1987
I am Using Vista Home Basic, and I am hooked on a LAN which runs on Squid Proxy. I am unable to Ping my Laptop from other PC in the LAN.
I am not able to use webcam on Yahoo messanger with Squid proxy ....... every time it says unable to determine IP address.
To find out what Windows 7 enables by default when you select "Enable Recommended Settings" during installation, do as Brink suggested below:
Quote:
Open a Help and Support window, then type in turn off recommended settings and press enter to search for that. It will give you a detailed listing of what these recommended settings are and how to turn the on and off at will.
Hello Nelson, and welcome to Seven Forums.
Open a Help and Support window, then type in turn off recommended settings and press enter to search for that. It will give you a detailed listing of what these recommended settings are and how to turn the on and off at will.
Hope this helps,
Shawn
My computer does not detect wifi signals, in fact does not show anything about the wifi, i wonder if there is any way to activate or need something specific
More repliesHello Support Team I bought a new HP-15ac-170tu laptop. Pls provide the Wifi enabling procedure for this product. I used Windows 7-32bit. Regardskaushal
Hi: Did you install the required wireless and bluetooth drivers for the wireless card your notebook has? If not, here they are... http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_149229_1&swEnvOid=405... http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_147638_1&swEnvOid=405...
3 more replies.
I have Win 7 Home Premium.
Is there an easy way to disable my wireless connection so that (a) it does not enable itself after a reboot, and (b) I don't need to implement the complete process to re-enable the wireless?
Under normal circumstances, the re-enable after a reboot is fine. I can disconnect WiFi from the system tray, and it reconnects after reboot.
But sometimes, I might want wireless to remain disabled after reboot. For example, if I'm doing a database restore, and the database starts synching after a reboot (such as Evernote), it could cause problems :-)
At the moment, I simply switch off the router until the database restore is complete.
.
Just don`t let it connect.
Doesn`t the laptop have an on off switch for wireless ? Most laptops do.
Hi,
I have a Sony Vaio with a switch on the front that turns WIRELESS on/off. Whenever I turn the switch 'off', I get a pop-up box that says something like 'Alert: Wireless has been turned off'. The pop-up also had an option to turn off this notification. I turned off this notification a week ago but now i would like to turn it back on. I have been looking at a lot of settings on my computer but I don't know how to turn it back on.
Does any one know how to turn the notification back on?
Thanks in advance.
Hello and Welcome to 7Forums!
Try Right-Clicking the Taskbar>Properties >Customize(button)> And select the notification from there!
I have a problem, normally I press Fn and F5 to bring up the window to enable/disable Wireless Lan and Bluetooth. But it's suddenly stopped working and I cannot switch on my Wireless Lan. This is on IdeaPad Y580 running Windows 7. 1. When I press Fn F5 no window opens. 2. When I press Fn F6 my track pad is enabled/disabled as normal, although I do not see the notification on screen. 3. When I press the Fn and volume or brightness controls, they work perfectly, but again I do not notification on screen, the bars showing level of volume or brightness. 4. Also the One Touch Recovery and One Key Theater buttons are not working. But the audio Mute button is working. 5. I have uninstalled the Lenovo Energy Management software and reinstalled it but no difference. 6. I have checked the BIOS and Wireless Lan is enabled. 7. I also saw that in Task Manager I cannot see utility.exe running. This is really causing me problems, can anyone suggest a fix? Thanks, Dave.
Solved!
Go to Solution.
Finally fixed it... 1. I uninstalled and reinstalled the Lenovo Energy management Software - No difference. 2. I uninstalled and reinstalled the drivers for the Wireless LAN - No difference. 3. I noticed that the OneKey Recovery button wasn't working, so I decided to uninstall and reinstall the OneKey Recovery software...it worked! 4. In Task Manager I can now see that utility.exe is running as below: Now I have no idea why the OneKey Recovery software would affect the Lenovo Wireless Device Settings? But I hope this might help someone else! All the best, Dave.
3 more repliesHi
I'm new to 7 (all my desktops are XP Home).
With XP, the OS just connects automatically to my home wireless network.
However with this netbook, I have to do it manually everytime I reboot - it's a real pain.
Not sure if this OS, hardware or both.
Can anyone advise ?
I've looked at services.msc WiFi service and it's set to automatic already ....
thanks
PS Also, is there a way to get 7 to boot straight to desktop, without having to click on user icon or enter password ?
The reason these 2 are important to me is that this netbook is basically a music server, so when I come in from work etc., I'd like to just power up the netbook then walk off and play stuff via my network (Squeezebox) players
Hi Swayzak,
Here's a quick guide for you.
Good luck
Tim
This is my first post here, so please excuse any mistakes I may make. My HP 2000 laptop isn't allowing me to enable my wifi. If I press F12, it enables and disables Airplane Mode instead of my wireless connection. I've had to do this before, and it was through the control panel I think? I'm using Windows 8 OS. Any help is appreciated,
Emily
.
I have Win 7 Home Premium.
Is there an easy way to disable my wireless connection so that (a) it does not enable itself after a reboot, and (b) I don't need to implement the complete process to re-enable the wireless?
Under normal circumstances, the re-enable after a reboot is fine. I can disconnect WiFi from the system tray, and it reconnects after reboot.
But sometimes, I might want wireless to remain disabled after reboot. For example, if I'm doing a database restore, and the database starts synching after a reboot (such as Evernote), it could cause problems :-)
At the moment, I simply switch off the router until the database restore is complete.
.
Just don`t let it connect.
Doesn`t the laptop have an on off switch for wireless ? Most laptops do.
Okay, I bought a new laptop recently, and I have a problem. Almost every game I try to play says, "AGP is not enabled....", and it tells me its needed for best performance. How do I enable it? I googled it, and I couldnt find anything, so I decided to ask here. My system specs are:
Computer Maker: TOSHIBA
Processor: Intel(R) Pentium(R) 4 CPU 1.70GHz
Memory: 1014MB RAM
Hard Drive: 200 GB
Video Card: Mobile Intel(R) 945GM
Thanks
From what I've read, you have an onboard graphics card(on your motherboard) I'm not sure if you have just that onboard card, or if you just have another card. If so, you could go into your BIOS(usually delete/f1/f2 at startup, one of those keys) read through it a bit. I know that sometimes there's an 'enable AGP' option, or anything that looks like it.
However, it doesn't look like you have an AGP card in your laptop.
Check that out first though. You might also want to check if you have the correct drivers for your card installed. On a side notenboard cards aren't very good for games, but they might handle a few.
Downloaded Virtual Box to M73 Tiny Desktop. Can't access Acceleration tab (greyed out) to setup guest OS -- all "help" points to BIOS setting...
Any idea of WHAT and WHERE in BIOS to enable, to gain full access to Virtual Box?
Mod: edited Subject line to add system type and clarify problem description
Solved!
Go to Solution.
What is the version and date of the BIOS?
8 more repliesHi, as mentioned on my other problem (system not shutting down correctly) I can't enable ACPI in the BIOS settings. Right now there are only very limited options so I think there must be some kind of advanced settings. Is there any way to activate further options in the BIOS (version 1.11)?
More repliesI have a b590 running under windows 7 ultimate that defies every attempt to enable the Broadcom 802 11n network adaptor. Device manager shows it as fully functioning. Any attempt to connect & enable it through network and sharing fails, and I cannot alter the power management settings within the properties screen of the device. Can anybody help with this?
More repliesI've just installed a wireless PCI adaptor (Tenda W322P 11N) in my desktop PC but I can't 'enable' it - every time I double click it starts to enable then stops and leaves it disabled with no warning or error messages.
The system is definitely seeing it as it's listed in Device Manager, and if I bring up Network Connections (using ncpa.cpl) it's listed and shown as disabled. Why would windows stop it from being enabled??
I've tried downloading new drivers from the manufacturers site in case the drivers on the disk were old - no difference. I uninstalled it and removed the drivers and then re-booted so windows would use it's own drivers - no difference.
It seems the system has a problem with it, but surely ONE of the drivers would work if it was a driver problem?
the software driver on their site is up to version 4.
If you are running on the driver off the disk it may be problematic.
W322P 300Mbps Wireless N PCI Adapter
hi, i'm using an HP Pavilion g4-1215TX laptop, after loading last known good configuration, my wifi will not enable anymore, even the wifi icon is missing from the taskbar... please help me with this problem, thanks
Why did you try "last known good configuration" anyway?
Any exclamation or question marks in "device manager"? And is your wireless adapter listed there under "network adapters"?
wifi icon is totally missing in taskbar?
Hey guys,
There is a difficulty i am facing recently in my girlfriend's house only(in all other places it works fine).
I have recently established a WiFi connection for her to use on her phone. It worked great the first day. It continues to work perfect on her mobile. On my net book, though, i can not see WiFi access point in her house.
It appears randomly for several minutes, i try to connect, it does not want to and then the access point disappears for some uncertain period of time. From time to time it appears and works fine from than on but disappears again if computer goes to sleeping mode...
Do you have any ideas what could it be?
Val
guys, anybody. please have a look. this is serious for me. thanks....
If my computer is not right next to the router and is idle for a while, the wifi connection drops. I have to "Open Network & Sharing Center", "Change adapter settings", disable and re-enable to reconnect. It's not a router issue since all other devices connect just fine.
Hi: The only suggestion I can offer would be to see if unchecking the 'Allow the computer to turn off this device to save power' box on the Power Management tab for the wireless card in the device manager, resolves the problem.
4 more repliesSo. at random times my WIFI gets disabled and when I hover over the symbol it says wifi networks available. When I go into the network list it just goes into a loop that never loads the list.
the none of the network list services can be restarted/stopped/started and in device manager I can not disable/uninstall/re-install my wifi adapter.
The only way to re-enable my wifi is to completely restart my computer with a forced shutdown (hold the power button) because normal methods go into loops that never end.
In the past I did fix it for an extended period of time by downloading the most recent .net Framework, this seemed to solve the problem for months until now.
I've seen many posts on how to disable action center and settings but have no help on how to enable it...! I have a Win 7 Ultimate and a couple of months back, my action center got turned off and the ability to change settings was grayed out too!
I checked first if it was an issue with some new program conflict but found none...
I checked the Group policy for clues but apparently many of the settings related to it are in order as far as my extent of its knowledge goes. Also the service related are active like the security module and action reporting service in the services are all in order too !!!
I have MS Essentials installed so i doubt its a problem with the antivirus.
Any help is appreciated.
I have uploaded the pic and group policy txt file. Please ask if any additional info is needed.
Those text files don't really contain anything.
Have you taken a look at the following information regarding this:
Group Policy Settings for Action Center
How can I turn off messages for certain Action Center items?
How to use Group Policy to turn off the Backup Notification in the Windows 7 Actions Center
I've had experience this problem for a while now on my newly built windows 10 rig. Every few hours, my Wifi simply stops working; the connection is lost. Sometimes it reconnects after a minute or so. Most of the time, I would need to manually disable/enable the wifi adapter in my Network Settings to get it back up again.
It happened with a relatively expensive adapter that I bought not to long ago - Netgear A6210 USB 3.0 dual-band wifi adapter. I found a thread about this issue here. I've not been able to resolve it with any of the tips provided (including downloading a generic 3rd party Mediatek driver). I've used this same adapter without this problem on my older Win7 machine. I thought maybe this adapter "went bad".
So I tried to replace this adapter with an older Wifi adapter made by Rosewill, using older Rosewill drivers. The same issue occurs. (Again, this Rosewill adapter worked perfectly in my Win7 system) So I have a hunch the problem is Windows 10 itself. Does it not place nicely with existing or older wifi adapters on the market? Would I need to buy a new adapter specifically certified for Windows 10?
Anyone have any insights on this would be greatly appreciated.
guys i have a strange problem with my WiFi lately
yesterday the my laptop lost the connection to my WiFi modem and when i tried to search it my laptop not find any WiFi modem but the other device such as: my smartphone detect it normally. but after that, i tried windows troubleshooting and it found that "you've lost your internet connect" and suggest some way to solve this problem, i followed the instruction and voila, my internet connection appear again but next 4 hours, it's dead again, i went to troubleshooting and it worked fine again.
so guys please help me to solve this annoying problem...
thanks before
Okay, it's now 13 Sep 2015 and I went around in circles to figure this out. I saw the same issues, to the point of knowing the driver was installed bu tthe Netgear tools never enable the WNDA3100v2, and one cannot manually enable it either.Also tried a USB A6200 device, with the same results.However, I did make this work, and it's kind of simple in my case. I was running the free Zone Labs Firewall & A/V package. And who's A/V package do they use you ask? Kaspersky! Kaspersky has a known issue with allowing proper installation of Netgear USB wireless adapters. So I followed the recommended guidense of a full uninstall of any Netgear WNDA3100v2 and A6200 drivers and software. Then a full uninstall of Zone Labs tools, reboot the computer, then reinstalled the WNDA3100v2 software. Followed the directions, recognition of the USB WiFi adapter was instant. Changed the device setting for being Enabled to auto connect if wired adapter is not connected, and here we are fully functional.Of course now I need to reinstall Zone Labs software, which according to the write up I read at Zome Labs, it should all just work now.Try this method if nothing else seems to work.
Can't recall your original post just now... But thank you for the workaround you seem to have discovered/executed. It may (as you suggest) help others with a similar/the same problem...
3 more repliesI'm on a Dell Inspiron 600m notebook computer. I reinstalled windows xp home, and I downloaded a package with all the drivers for this system.
The wireless card is a Broadcom 440x 10\100 integrated controller
I am certain that is the card in the system, and the installation of the driver was successful. However, the wireless network icon in the start bar does not appear.
In the device manager, the broadcom card is listed under "Network Adapters." However, under the "Other Devices" section I found a yellow question mark with an exclamation point next to the words, "Network Controller."
----------------
The Device Instance ID for this "Network Controller" is:
PCI\VEN-8086&DEV-4220&SUBSYS_27218086&REV_05\4&39A85202&0&8F0
----------------
When I go into the Command Prompt and type "IPCONFIG /ALL," this is the readout:
Windows IP Configuration
Host Name . . . . . . . . . . . . : zack-1093bc68a7
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Cont
roller
Physical Address. . . . . . . . . : 00-12-3F-F6-A9-83
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Description ... Read more
'under the "Other Devices" section I found a yellow question mark with an exclamation point next to the words, "Network Controller."'
So, there is a problem.
Did you click on that to find out exactly what it says is the problem?
edit: 'I downloaded a package with all the drivers for this system.'
Does this mean 'I downloaded all the drivers, installed the chipset drivers first, then installed all the other drivers.'
Hi, I have a Dell Inspiron 1545 notebook pre-installed with Windows Vista Home Basic SP1. I found few of my softwares incompatible in it. So I preferred installing Windows XP SP2 removing Vista. I succeeded. I tried installing drivers.
The error message popped when installing "Dell Wireless 1515 (11agn) WLAN half mini-Card(Atheros) Rev:A01" was as below:
"Dell Wireless 1515 Adapter Device Not Found
The device may not be present or could have been ejected/unplugged from the system.
Aborting the install, please insert the card and try the installer again."
I thought it cud be BIOS configuration problem. But cudn't figure it out.
Please help asap!
and welcome to the Forum
Where did you get the driver? . . Did you install the Notebook Software and Chipset first?
You can go to the Dell support site, enter your Service Tag Number and download the drivers
See this for the order they should be installed:
http://support.dell.com/support/topi...=en&l=en&s=dhs
I am unable to find the switch or keyboard key to enable WIFI on this system. I looked all around the cover and keyboard. Please help.
More repliesI really need help enabling the 'advanced settings' for my audio manager.
I've aready reinstalled the drivers 'alot' of time using different versions of it.
See the attached screen shot of my HD audio manager.
The speaker and mic works fine, the problem I have is
when I plug in the headphone jack into my s/pdif slot
both the speaker and headphone plays sounds
I heard I can change this in the advanced settings...
which I can't acess...
Thanks in advance.
Assuming you have on-board sound, it probably depends on the motherboard and what it can handle for sound and audio. I have the Device Advanced Settings option in the upper right corner.
Check this pic.
.
My older brother has a Toshiba Satellite laptop. In his configuration, he has enabled fast boot up, thus, upon power up, the initial splash screen doesn't show but straight to the windows login screen. Now, I wanted to access the BIOS but I don't know how. I tried pressing DEL (for the BIOS setup) but since he has once enabled fast boot up in the BIOS settings itself, I can no longer do so. It always goes straight to the logon screen. Please help guys. I've tried searching the forum for possible same case/s but to no avail.
I just googled how to enter the BIOS on a toshiba and saw several suggestions, including:
escape key
escape key for 3 seconds, followed by F1.
F1
F12
Take a look:
- Google Search
I wish to enable the additional settings button of the region and langauge which is greyed out. Refer to attachment. How do I enable the additional settings button?
More repliesHi, I have purchased hp-15-ba025au yesterday. After installing Windows 10 64 bit, I found that wifi is missing. I am not seeing Wifi under device manager. Though I can see bluetooth. I am seeing one "Network Controller" under "Other devices". Not sure if it would help. Cheers,Dharmender
Solved!
View Solution.
Hi: The parts list for your notebook indicates it comes with a Realtek RTL8723BE-VB 802.11b/g/n 1x1 Wi-Fi + Bluetooth 4.0 combination WLAN adapter. http://partsurfer.hp.com/Search.aspx?SearchText=X5Q25PA Below are the links to the wireless and bluetooth drivers you need for that model wlan card... This package contains the driver installation package for the Realtek RTL8723BE/RTL8188EE wireless LAN Controller in the supported notebook models running a supported operating system. File name: sp75613.exe This package contains the driver installation package for the Realtek Bluetooth in the supported notebook models running a supported operating system. File name: sp75614.exe
5 more repliesAlthough I am connected to our wireless network on the Folio 13, there is no internet connection. I can, however, connect to the internet via Wifi on two other household laptops, both of them HP, so I believe the problem is with the Folio itself. I can also connect to other computers on the network on the Folio, but something is preventing it from getting on the internet. I can only get the internet via hardwired ethernet connection on the Folio. I have tried the following fixes, multiple times, without success: -Run the Windows troubleshooter for Internet/Network. It says the connection between your access point, router, or cable modem and the internet is broken. (But not on other wifi computers here--works fine.)-Reboot/Reset the modem.-Disable/Renable the wifi adapter (Intel Centrino Wireless N 1030)-Update wifi adapter driver (it says driver is up to date)-Uninstall/reinstall wifi adapter-Remove Wifi Network from list of available networks; reboot, add this network back in-Roll back all Windows updates from the past month-Searched self-help forums for a possible solution And yes, the wifi keyboard light is blue, not orange. Can someone help please?
Hi A visual reference point... From your description the fault is either with an app or hardware issue. But if you follow the paths you may actually find the correct resolution. AAND I doubt I can can come up with anything new, but confirmation of the settings from your description, may help me to. So as an administrator, in a Command Prompt window (or copy and paste the whole netfixer.bat) short version... C:\WINDOWS\system32>getmacPhysical Address Transport Name=================== ============================================48-E2-44-54-66-27 \Device\Tcpip_{F5FF31F1-C343-42B0-B6A9-BD17E49ED64
Hi everyone,
I need help in disabling the Intel ProSet Client without uninstalling the software and I want Windows Zero Configuration to be started, and Enable the Microsoft Client for Wireless Connections through a Batch File or a Script.
Can any one help me in writing the batch file or a script file to do this
Note: I don't want to uninstall the Intel ProSet WiFi Client Software from my System. I just want to Disable the Services.
Thanks in Advance,
With Best Regards,
Muvva
^ as I understand it , you can goto services and
disable the unwanted services (make them manual)
& enable the required services and save the settings .
............................
I wish I were right
Let me start by explaining what led to my problem.
I work for an electric utility, and we issue Panasonic Toughbook laptops to our linemen containing our mobile mapping and AVL (Automatic Vehicle Locating) software. They are all running Windows XP Professional SP3. Our AVL software requires an internet and VPN connection to our AVL server at the office (we currently use Verizon Air Cards and the Cisco VPN client to achieve this). Since implementing this, we have found that Cisco VPN and the Verizon Air Cards do not work well when the wifi network adapters are turned on (or enabled). When they are turned off (disabled) everything works nicely. We can't just disable the wifi NIC's and call it good either because our user's need the faster wifi connections to perform database syncs in the mornings (via hotspots inside each garage bay). Once they are all synced up and out of range of our wireless network, the wifi NIC's are no longer needed. Since the wifi NIC's and Air Cards don't get along, we have been having our users turn the NIC's off using a hardware switch on the Toughbooks cassis. However, some of our older models (CF-29's to be exact) do not have these hardware switches. Our solution was to create two batch files and place them on the users' desktops; one that turns the wifi NIC on, and one that turns it off.
This brings you up to my current problem...
Our user?s logon to a non-admin account and because of this, they do no... Read more
I take it that's a "no"?
5 more repliesHi,I have a new Aspire ES 13 (ES1-331-P4C1) with Windows 10. I can connect to my wifi-router and access the internet, but the connection randomly drops after a couple of minutes. I can reconnect (sometimes), after running the windows troubleshooter. The wifi-chip is a broadcom BCM43142. It seems, that there's an issue with the driver and/or Windows 10. Wifi works perfectly on Ubuntu-Linux booted from USB. Here's what I've already tried:- reboot of router- turn off all the energy-saving stuff in the device-manager- uninstall old drivers- install new drivers from the Acer site- install all windows updates- install driver in compatibility-mode (windows 7)- reset windows 10 (delete everything and reinstall windows from recovery) The question really is, if this is a known problem with the driver or the OS. If so, then I could install Windows 7. But I'm very close to sending the laptop back, because I really don't want to waste my time fixing a newly bought, preconfigured laptop. Thanks in advance
I had similar problem with ES15. It started by dropping wifi after about one hour of use, then got worse...Also was plagued with the infamous "red x" over the network icon down in tray at bottom. After slight improvement when I updated the firmware (it was out of date), problem degraded to point that I could not connect at all, even with re-booting. Finally, even no internet with ethernet! Problem finally solved by doing the following: press "control/alt/delete" all at once, select "Task Manager",click "Services Tab" at top, click "status" tab on line just below the tabs: this will re-sort the services alphabetically together according to their status's (ie running, stopped)...click again on status until all the services in the top of the list you are seeing all say "stopped". Carefully begin going down the list top to end of services that are stopped, any stopped service that contains a reference to network, connection, connectivity, discovery,x-box,wireless, LAN, WAN, homegroup,:click on it (memorize the service name), right click on it: select "open services" find that service in the alphabetical list,(notice the descriptions here are very detailed now) RIGHT CLICK IT, select "Properties" select "Start", If startup type is not "Automatic", select "Automatic", click apply. Go back to the previous services page, continue down the list from previous service (that you just changed) and find the next one, repeat above steps. It may be fast... Read more
3 more repliesIm just wondering as to the settings for best 'performance' NOT graphical quality.
these are the settings:
asyncronous flip: on/off
tripple buffering: on/off
flipping policy: flip/blit
depth buffer bit depth: 16bit depth buffer/24bit depth buffer/deffault
force S3TC texture compression: on/off
force XFT! texture compression: on/off
driver memory footprint: high/normal/low
texture colour depth: desktop colour depth/16 bit per texel/ 32 bit per texel
anisotropic filtering: off/on/ application control
Thanks.
every thing off and 16bit
but its going to look like crap and your going to lose comparability with some programs so I WOULD NOT ADVISE IT AT ALL!!!!
I'm having trouble getting connected to my internet. I'm not techy and getting lost in trying to find a solution. I am with talk talk and even there repair tool is failing.
I have switched off my pc and network router and have switched all on again but still not connecting. I have a belkin G plus mimo usb network adaptor which is flashing green. The messages i seem to get are:
with talk talk repair tool: network device unbound, network adaptor needs communications protocol.
through windows when i try to repair: TCP/IP is not ebale for the connections.
Any help would be appreciated. Thanks
Hi Maria, Im not real good at this type of problem but I will help if I can. I noticed you havent had any responses to your thread so I thought Id try. Let me do some reading about this problem so I can try to give you some links and screenshots that might help you fix this problem. Heres a couple of questions that will help us help you. Just answer them as best as you can and iff you dont know the answer to something its ok. If I've asked anything you've already answered in your first post just skip it.
1). What kind of computer do you have? Laptop? Desktop? Dell, HP, Ect?
2). Whats your level of experience? Novice, intermediate, expert, or dont know squat?
3). What operating system are you using? Xp Home or XP Pro?
4). What antivirus are you using?
5) Please tell us a little about your computer. How old is your computer? Hard drive, processor, ram, Bios ver. Ect.
6). Do you have a Xp disk for this computer?
7). What type of internet connection do you have? DSL Cable, Dialup Ect.
8). What kind of router is it that you are using? Is it wireless?
9). Do you have access to another working computer. I think you said you did.
and anything else that might help us help you. Remember we are trying to help from a forum so all we have to go on is what you can tell us.
I dont think this is too complicated of a problem probably just need to connect something properly, or reinstall your com protocols or enable your TCP/IP. Possible even a reboot of your modem and router ... Read more
hello techs
i searched it on google but dint come with the solution and am sure you guys can certainly help meout
....
what is the diffrence between wifi and intel wifi?
does both of them work concurrently or intel mywifi has replaced conventionl wifi?
and how can i use intel mywifi to connect two laptop which are adjacent to ach other but not using public network? (like we can use them to play games to have real time experience if possible?)
hopefullly you guys could help me out
thanx in advance...
i recently updated my wifi software to version 12.1.1.0. now when i make a new profile for ad-hoc network it does not show up in the profile list. but if i try to make a new profile with the same name it tells me that a profile already exists with the same name.
i older version was workin fine
HI
i have the similar problem with my Intel WiFi link 1000 bgn installed on Lenove Edge 15. The BSOD occurs when i share internet by Connectify software. Other devices are perfecly connected, but when its start webpage downloading BSOD occurs. What is strange is that it is possible to download few kB of infromation before BSOD, one webpage (not heavy) could be perfecty displayed.
Driver are uptodate. Maybe i should try older drivers version? My OS win 7 Home Premium x64.
Thanks in advance of your help.
Hi -
I moved your post; created this new thread.
Referenced thread - [SOLVED] BSOD netwNs64.sys again - twice a day - please help !!
Please run - http://www.techsupportforum.com/f217...ed-473665.html
Provide system info - http://www.techsupportforum.com/f217...ns-452654.html
Regards. . .
jcgriff2
`
HELP!.
For the life of me I cannot get this great "thought" to work "any more"!
I bought a Dell studio 1569 from Best Buy. LOVE THE PC but one of the selling points was the intel Mywifi utility. It worked for a while and is seems like windows update got out in front of the Intel updates and it has never worked since.
I have updated all the drivers for it and for windows. I have bought new receivers but the bottom line is that when the utility is chosen, I either get "No supported Intel wireless adapter found" or I get " Intel My WiFi Technology not enabled. Restart the computer and try again."...........................believe me, I've restarted....
Don't worry, I'm not overly hopeful after reading a number of internet responses but I thought I'd try.
Thank you everyone in advance for any light you can shed.
Regards,
SoCalFalcon
Does the Intel adapter appear as "OK" under Network adapters in Device Manager? Is the installed driver the latest from Dell's web site?
Does anybody know when Intel is going to release Windows 7 Pro/Wireless and WiFi Link drivers?
Did you try Windows Update or the Vista x64 drivers? I don't have any issues getting various Intel wireless cards working with Windows 7. One of Windows 7's best achievements is that driver support for it is already in place, for the most part...unlike Vista's release.
1 more repliesHi
I was playing with my laptop vga settings in its settings panel. vga is Intel HD graphics 4400.
I changed some default settings for movie mode enhancing colors and such stuff. The new settings are used very good by windows media player but VLC is not using them, and is showing dull colors.
What settings i need to manage in VLC for this?
Attached below are the images. One is VLC screenshot and other in WMP screenshot.
I have always wondered what I could do to improve graphic performance for mostly gaming but also overall.
My notebook's graphic card is a Intel GMA X3100 (GM965 Express/384MB), Windows Vista would use 128MB, but Windows 7 uses only 64MB for AERO. My driver is 8.15.10.64.1825 (June 2009) and I want to know if I can change the settings in OpenGL to improve stuff:
The options provided are as follows:
1: Asynchronous Flip: Off [Off/On]
2: Triple Buffering: Default [Default/Off/On]
3: Flipping Policy: Flip [Flip/Blit]
4: Depth Buffer Bit Depth: Default [Default/16 Bit Depth Buffer/24 Bit Depth Buffer]
5: Force S3TC Texture Compression: Off [Off/On]
6: Force FXT1 Texture Compression: Off [Off/On]
7: Driver Memory Footprint: Normal [Normal/Low/High]
8: Texture Color Depth: Desktop Color Depth [Desktop Color Depth/16 Bits per Texel/32 Bits per Texel]
9: Anisotropic Filtering: Application Control [Application Control/Off/On]
Could someone please point me in the right direction.
Intel settings guide
1.on
2.off
3.Apparently if you run fullscreen flip is your only choice.
4.default
5.off
6.off
7.normal
8.Desktop Color Depth
9.off
Do you even have any games that use OpenGL?.
Can you help me enable the USB printer port on my
Windows 98?
Thanks, Elaine in Dallas
When you start up the system you should see a message "press key to enter setup" usually the delete/F1/F2/F10 key are the most common. Once you enter setup, look through the menu's until you find the option to enable/disable usb, set it to enabled, save, and exit. If enabled windows should recongize the port on the reboot and will probably ask for your windows cd to load drivers from
Hi guys,
Would really appreciate some help here as I am getting the run-around from ISP, Microsoft and Compaq.
I have a Windows Vista 32 bit Home Premium Compaq Presario that I have put downstairs and am trying to connect to the internet via a Netcomm NP545 USB stick. The USB stick worked fine on my old computer which ran XP but it won't work on the Vista model.
The USB stick is compatible with my version of Vista, the problem is that when I go to the network settings and it shows my wireless connection, it is disabled. If I click enable it goes on to say enabling...enabled but it remains disabled.
The USB stick works on my other two computers one running XP, the other running Windows 7. And am at a total loss as to what could be preventing it from working.
Anyone have any ideas?
When I try to set up the wireless connection and it doesn't find one, the diagnosis is
"RT73 USB wireless Lan card is experiencing driver or hardware issues"
Hello & welcome,
I think you are being pointed in the right direction you just need to go there: -
NP545: NetComm
What antivirus & firewall are you using?
