Tech Problem Aggregator

Anniversary update won't install - no error code

Q: Anniversary update won't install - no error code

I've downloaded the update for my laptop through windows update 3 times now. Each time it completes download, then restarts, configures updates, then gives me the notification: "We couldn't finish installing updates" Following that, a check of my update history shows no failed attempt or any reference to the update being downloaded. There is not at any stage an error code.
I have run the Windows Update Trouble Shooter with no result.
Any ideas will be welcome.

(I have a monthly isp download limit of 10 gb and with the speed i get it takes 4 hours to download the update so it has to be done after midnight so it doesn't count against the download limit )

A: Anniversary update won't install - no error code

Hi, download the ISO manually and create a bootable medium (which is useful in various circumstances).
(How - where- see the Tutorial section or search the net- not difficult).

That way you download once and can retry and have it available for other purposes. Also you avoid issues with Windows update.

From an admin command prompt
[Windows key + X, click command prompt (admin)]
chkdsk C: /F
Your PC will need to restart.
Make sure the result is clear or fixed.
Post back the result, which you can get after a restart as follows:
How do I see the results of a CHKDSK that ran on boot? - Ask Leo!

Disable any AV. Disconnect any devices you don't need. Uninstall any program that affects or modifies your GUI.

Do a clean boot then try the upgrade using the Win 10 DVD/USB.

If it fails again, you can have a look at the log:
Windows Update logs are now generated using ETW (Event Tracing for Windows).
Please run the Get-WindowsUpdateLog PowerShell command to convert ETW traces into a readable WindowsUpdate.log.

For more information, please visit http://go.microsoft.com/fwlink/?LinkId=518345

Good luck!

1 more replies
Answer Match 82.74%

Hi
Checking update history shows no errors, just the update waiting to be installed.
Here's what happens: update goes all the way through to the end, then it hangs with a black screen with the little dots going round and will sit like that for as long as I'll let it. There's no hard drive activity during this period.
When I eventually get bored of waiting, I do a hard reboot and the previous version is reinstated.
Any ideas how to move on from this?

A:Win10 Anniversary Update fails, but no error code.

To update to anniversary update and face minimum bugs or none use media creation tool by Microsoft. By personal experience it is the best way to upgrade to anniversary update.
you could download the media creation tool here: http://forums.windowscentral.com/e?l...token=3lPiByUm
Here is a knowledge article on How to by Windows Central: Use the Microsoft media creation tool to force the Windows 10 Anniversary Update today | Windows Central
At present you could try disabling any Antivirus. Disconnect any external devices you don't need and retry installing.
If you need additional help or want to reply to this thread , learn how to join windows central.

1 more replies
Answer Match 82.74%

Hi all,
I cannot update to Windows 10 anniversary update. I get the 0x8007001f error code.
Here is the log from C:\$WINDOWS.~BT\Sources\Panther\setuperr.log


Code:
2016-09-08 17:28:05, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Suspend(1066): Result = 0xC1800104
2016-09-08 17:28:05, Error MOUPG CSetupManager::ExecuteInstallMode(735): Result = 0x800705BB
2016-09-08 17:28:05, Error MOUPG CSetupManager::ExecuteDownlevelMode(391): Result = 0x800705BB
2016-09-08 17:28:06, Error MOUPG CSetupManager::Execute(236): Result = 0x800705BB
2016-09-08 17:28:06, Error MOUPG CSetupHost::Execute(372): Result = 0x800705BB
2016-09-08 17:38:30, Error CONX Failed hashing for \??\c:\program files (x86)\norton internet security\nortondata\22.7.0.76\definitions\sdsdefs\20160630.020\eng64.sys, 0x80070003

2016-09-08 17:38:30, Error CONX Failed hashing for [\??\c:\program files (x86)\norton internet security\nortondata\22.7.0.76\definitions\sdsdefs\20160630.020\eng64.sys] 0x80070003

2016-09-08 17:38:30, Error CONX Failed hashing for \??\c:\program files (x86)\norton internet security\nortondata\22.7.0.76\definitions\sdsdefs\20160630.020\ex64.sys, 0x80070003

2016-09-08 17:38:30, Error CONX Failed hashing for [\??\c:\program files (x8... Read more

More replies
Answer Match 82.74%

original update went fine. 1511 update went fine. plenty of space on drive. plenty of available memory. windows defender security installed. ?

More replies
Answer Match 82.74%

I am trying to update to Anniversary edition of Windows 10 on 32GB ASUS Tablet. The update to 1511 went just fine. Now I am getting error when trying to upgrade to 1607 using Windows10Upgrade.28084. It checks compatibility and CPU, Memory and disc capacity all show good. Then get the page which shows error code 0x80070070 and states not enough space to install and suggests disc cleanup. Did that and have 18.0GB free space. But it will not let me download and install the upgrade. I do not have any apps running which I can remove. Surely 18GB is enough space. Please respond with a fix for me. Tablet is running 32bit OS

More replies
Answer Match 79.8%

We couldn't install Windows 10
0xC1900101 - 0x40017
We've set you PC back to where it was right before you started installing Windows 10
The installation failed in the SECOND_BOOT phase with an error during BOOT operation
What was tried: Connected straight to ethernet, Turned off wireless and Defender A/V, Removing the D/L files, D/L fresh from ISO file, launched install file, went through approx 50% and PC rebooted - nor stuck on black screen with swirling dots for OVER 4 hours with a brief HD access every couple of seconds.
Rebooted again -- still swirling dots on black screen. Tried again, same results.
Rebooted with F8 to get original Win 10 back.
Turned on "metered connection" option for WLAN to stop this update from happening. But now I cannot get and security updates for this machine.
Please suspend this D/L until fixed. Cannot afford to have no protection!

More replies
Answer Match 76.86%

After the second boot on the updating screen, the one with the spinning thing. When it gets to 83%, my screen just freezes out of nowhere. I tried switching off and back on again but it reverts back to my previous version of Win10. I tried getting Microsoft Support to help but their service wasn't all that great and I wasn't too happy with them. So I'm calling on you guys to help me out.

A:Tried to install Anniversary Update but it fails by error 0xC1990. Please help me?

Welcome!
Please consider joining us here at Windows Central as a valued member.
Here's a recent WC article that may help you: Windows 10 Anniversary Update common problems and how to fix them | Windows Central

1 more replies
Answer Match 72.24%

Hey all,

So I am currently reinstalling Windows on my dad's old laptop after the hard drive decided up die on us, and I stumbled on a problem that's a bit too hard for me to fix.

Namely, I am completely unable to install any Windows Update. Not even MSE will install.

I tried running SURT, but got error code 0x8000247
I also tried running SFC /SCANNOW, it ran the verification fase until 98% and then stated that there where unfixable problems.

The displayed error codes are:
In WU: "8024A000"
In SURT: "0x8000247"
Whilst installing MSE: "0x80070643".

Attached you will find CBS.log and MSINFO with my system specs.
Cheers and many thanks in advance,
Nommy

CBS.log MSINFO32.nfo

A:Windows Update error code 8024A000; unable to install any update.

That's very reminiscent of similar errors in Win7 - and I wouldn't be surprised to see it being non-genuine.
Please post an MGADiag report BEFORE doing the below potential fixes.

This may simply be caused by a bad set of Intel Storage Matrix Technology drivers -

Installing the Intel Drivers
try downloading and installing them from here -
https://downloadcenter.intel.com/Det...&DwnldID=17882

(IATA89ENU.exe)

Once complete, please reboot twice, then post another MGADiag report.


If nothing has changed, try this...

Please run the following commands in an Elevated Command Prompt

NET STOP CRYPTSVC
REN C:\WINDOWS\SYSTEM32\CATROOT2 CATROOT2OLD
NET START CRYPTSVC

once complete, leave the system alone for at least an hour to rebuild the database, then reboot, and run another MGADiag report and post the results.

If neither of them work, we'll re-evaluate.

9 more replies
Answer Match 70.14%

i did the update . after that i could not login anymore . pin was not correct.
when i looked in option of user at sign in option i see the pin option is completely missing .
anyone fixed this ??

A:windows 10 pin code not working after anniversary update

are you able to sign in using the password?

1 more replies
Answer Match 69.72%

Hi,
I have been having some recurring problems with the attempts to install some automatic windows updates.

Security Update for Microsoft Office Acess 2007
Security Update for Microsoft Office Outlook Junk Email Filter

I am not able to install these updates, maybe any other updates in general. After attempting the install the following install window says, "Windows Update encountered an unknown error." Next to it an error code 80070643. Microsoft provides a solution to the problem, by re-installing Microsoft NET. Framework. They also provide a link to the program NET. Framework cleanup tool that enables you to uninstall NET. Framework, and it's components.

I followed Microsoft's instructions to solve the issue, though I've been put at a standstill. I have used the NET. Framework Cleanup tool to uninstall NET. Framework and it's components (states that it uninstalls all versions, 1.1 SP1 1.1, 2.0, 3.0, 3.5.) Then afterwards instructed to reinstall NET. Framework, specifically in an order, 3.5 then, 1.1, then 1.1 SP1. I start with 3.5, then as the installation starts it says that to contiunue installation I must turn off or on windows features in the Control Panel. I do so and turn off all Windows features. Then continue and it again states to turn off features in the Control Panel.

I wasn't able to continue the process, and I am also concerned that this is the same error that made me unable to install Microsoft Security Essentials, (as t... Read more

A:Error Code 80070643, Windows 7 Update error, can't install updates.

Hello?
Waiting for a day no one seems to be replying.
 

1 more replies
Answer Match 68.88%

Running Windows 7 Home Premium on an Asus X53U Laptop. Windows build 6.1.7601. AMD c-60 Proc, 1.0 Ghz, 8.0GB Physical memory installed.

Can't get IE 11 to install, error code 9C59 after running SURT. The old error message was 9c47. Updates shows that IE10 is an optional update, if you attempt install it ends on 9C48. Likely because IE10 is already installed. (saw somewhere that is what the 48 code means in the error message).

Before reading this forum I read I should uninstall ie10. That was not good, got browser with no address bar and it was not in full screen. Ran system restore and found this forum.

Ran SURT KB947821, took 4.5 hours, no errors, no msgs just a long execution. Ran sfc /scannow as Administrator, ended with message "Windows Resource did not find any Integrity Violations.

I've attached to CBS zip files as I read system only accepted 8.0MB file size. My zip was 9.xMB so I split into two and will have to post second file. Sorry if I've done this wrong.

Not sure what I should do next.

A:IE 11 Update Won't Install Error Code 9C59

Second cbs zip file. Hope I didn't break a rule but wanted all required information to reach forum.

9 more replies
Answer Match 68.88%

Have tried numerours attempts to install IE10, but keep getting same error. All other installs and updates seem to be ok. I have run the Readiness Tool, the SFC Scan and provided the Windows update error codes. The event logs is as follows:
-System
-Provider[ Name] Microsoft-Windows-WindowsUpdateClient[ Guid] {945A8954-C147-4ACD-923F-40C45405A658}
EventID20Version0Level2Task1Opcode13Keywords0x8000000000000028-TimeCreated[ SystemTime] 2014-02-05T02:52:59.381481900Z
EventRecordID1158681Correlation-Execution[ ProcessID] 1224[ ThreadID] 9116
ChannelSystemComputerharrysterling1-Security[ UserID] S-1-5-18

-EventData
errorCode0x80070643updateTitleInternet Explorer 10 for Windows 7 for x64-based SystemsupdateGuid{5F84379F-7C14-472F-B560-62A0CDEC6F31}updateRevisionNumber204

I will appreciate any assistance you can provide.
Harry

A:Cannot Install IE 10 update - Error Code 9C59

I suspect that part of your problem is due to strange time-shifts that appear in your CBS log.

Also, you have a large number of filters present - this may be overloading your system.

What AV's are currently installed - and what other AV's have ever been installed?

5 more replies
Answer Match 68.88%

Hello, I hope someone can help.

I can't install Internet Explorer 11. Windows Update goes through the installation, and then fails with a "Code 9C59" error. Been fighting this for weeks, tried the update nearly a dozen times, still fails.

I have run SURT several times, and it seems to complete normally, but it hasn't fixed the problem. Just ran it again this evening, as instructed in the "Windows Update Posting Instructions".

Then ran 'sfc /scannow' as instructed (this is probably the 5th time I've run it). It completes with a message that it found some corrupted files but could not fix them.

Finally, ran the IE11 update again, which failed again , and grabbed a screen shot.

The screen shot of the update error is attached. I also tried to attach the Zip'ed CBS logs, but the upload failed: think it may be too big (it's 25 MB). Any suggestions on how to work around that?

Appreciate any help you can give me.

Thanks,
Roger H.

A:Cannot install IE 11 Update, Code 9C59 error

Hello rogerh2,

I'm sure Noel will be here to help in no time.

In that between you could run SFC /SCANNOW : Run in Command Prompt at Boot

9 more replies
Answer Match 68.88%

I am running Microsoft Windows 7 Home Premium x64 SP1 and everytime I try to install IE11 from Windows update it gives me the 9C48 error. I've tried downloading and installing the IE 11 standalone installer but it keeps giving an error that "Setup cannot continue because a more recent version of Internet Explorer is installed on your computer".

I have been searching Google and these forums and I noticed people attach their CBS and checkSUR logs after running sfc /scannow, so I am doing that as well in hopes of someone being able to help.

I have tried so many different fixes, CheckSUR, subinacl, MS Hot fixes, uninstalling IE11 etc. I hope someone is able to help. Thanks in advance for your help.

A:Error code 9C48 when trying to install IE 11 update

I was curious if anyone knows how I can fix this issue?

4 more replies
Answer Match 68.88%

I managed to fix most of the checksur errors (there was 8 in the beginning) on my own but now I am stuck.
Anyway I am on Windows 7 SP1 32 bit, I have run checksur and then sfc and uploaded the CBS folder with the logs.
Thanks in advance

A:Error code 9C48 when trying to install IE 11 update

CheckSUR found and fixed one problem.

SFC found this error...

Code:
Line 4787: 2014-09-10 01:33:43, Info CSI 000001db [SR] Repairing 1 components
Line 4788: 2014-09-10 01:33:43, Info CSI 000001dc [SR] Beginning Verify and Repair transaction
Line 4791: 2014-09-10 01:33:44, Info CSI 000001de [SR] Cannot repair member file [l:20{10}]"mshtml.dll" of Microsoft-Windows-IE-HTMLRendering, Version = 11.2.9600.17107, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 4794: 2014-09-10 01:33:45, Info CSI 000001e0 [SR] Cannot repair member file [l:20{10}]"mshtml.dll" of Microsoft-Windows-IE-HTMLRendering, Version = 11.2.9600.17107, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 4795: 2014-09-10 01:33:45, Info CSI 000001e1 [SR] This component was referenced by [l:152{76}]"Package_1_for_KB2953522~31bf3856ad364e35~x86~~11.2.1.0.2953522-2_neutral_GDR"
I'll post a fix protocol for it later.

6 more replies
Answer Match 68.46%

Dear Sevenforums,

I just installed a new HDD by WD into a HP DV7T (2008), everything has been going well up until I tried to Update Windows. I did not retain anything from the previous installation as the previous hard drive up and quit on me!

I activated windows and had it confirmed as genuine.

I followed the instructions posted on another page and tried to install SURT and got an error: 0xc8000247.

I was hoping for some suggestions, Direct X , Java, MSE and Mechwarrior Online wouldn't install.

Perhaps a driver issue?

Have a great day all!

Sincerely,
Noodle123

A:New HDD, Windows will not update, cannot install SURT error code below

This error is due to problems with the hard drive drivers.
First, open Device Manager, and click on View > Show hidden devices

Are any devices showing with yellow triangles or red crosses?
If so, Uninstall them, then reboot and see if that cures the problem.

if not...

This may simply be caused by a bad set of Intel Rapid Storage Technology drivers -

Installing the Intel Rapid Storage Drivers
try downloading and installing them from here - https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194

(you want the iata_enu.exe download)

Once complete, please reboot twice, then post another MGADiag report.

4 more replies
Answer Match 67.62%

Hi all,

I am having a problem installing the above update. It will download to 11% and then instantly fails, never getting to the Installation phase. I have no problems downloading or installing any other updates.

I have run the System Readiness Tool

sfc/scannow reports some corrupted system files that it cannot fix

I've restarted several times with no change

I have not been able to attach the CBS log as when I try to upload it I get an error.

A:Cannot install Windows Update KB2972211 - Error Code 80073712

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

9 more replies
Answer Match 67.62%

Hi all,
I am trying to install Service Pack 1 (KB976932) on a freshly installed Lenovo notebook with Windows 7 Home Premium 32 Bit. After running many suggested solutions from the update workflow itself the update readiness tool reported some corrupt files:
- Deleting Windows Update cache
- Running WindowsUpdateDiagnostic
- Running sfc /scannow
- Running Update Readiness Tool Windows6.1-KB947821-v33-x86

--> I might have corrupted files according to the log file but could not find reliable download locations:

CheckSUR results:
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 25.0
2014-10-23 14:08

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_2_for_KB2545698~31bf3856ad364e35~x86~~6.1.1.3.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_2_for_KB2545698~31bf3856ad364e35~x86~~6.1.1.3.cat

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store

Summary:
Seconds executed: 469
Found 2 errors
CBS MUM Corrupt Total count: 1
CBS Catalog Corrupt Total count: 1

Unavailable repair files:
servicing\packages\Package_2_for_KB2545698~31bf3856ad364e35~x86~~6.1.1.3.mum
servicing\packages\Package_2_for_KB2545698~31bf3856ad364e35~x86~~6.1.1.3.mum
servicing\packages\Package_2_for_KB2545698~31bf3856ad364e35~x86~~6.1.1.3.cat
servicing\packages\Package_2_... Read more

A:Windows 7 32Bit Update Error Code 800B0100 for SP1 install

Extracted the corrupted files from the downloaded KB file Windows6.1-KB2545698-x86 with expand -F:*.* Windows6.1-KB2545698-x86.msu and then expand -F:* Windows6.1-KB2545698-x86.cab and then copied them to the folder C:\Windows\servicing\Packages

2 more replies
Answer Match 67.62%

Hi!
That's what's happening.
I have tried internet research solutions to no avail. Finally had to come ask for help from you guys!

I uninstalled the previous Java update (jre-7u71-windows-i586.exe) I had on my laptop. Then tried to install the latest update (jre-8u31-windows-i586.exe). It would start to install, then I would get error code 1603.

I tried to reinstall the older update. It would not reinstall. Same error code 1603. I guess I am currently without Java.

That sums up the basic problem. Can someone tell me how to fix this?

Thanks.

A:Can't Install latest Java Update: Error Code 1603

Try the java removal tool first. https://www.java.com/en/download/faq...r_toolinfo.xml

13 more replies
Answer Match 67.62%

Hi
Windows Update has been trying to install the same 9 updates now since yesterday. Prior to that it's updated with no problems. It goes through all the motions, including having to restart the computer to finalize the updates and it goes through that also, then the Update window says it failed and the error code.
WU then starts the whole thing all over again. Right now it's still on my taskbar and the restart button on the pc has the WU icon ready to finalize after restarting.

I've followed the directions in the Windows UPdate Posting Instructions.

Error code: 80070308

Enclosed is the sfcdetails.txt

I cannot upload the CBS.zip though. I've tried several times and it's not completing. After a few minutes waiting while it says 'File uploading...please wait' the little window goes from that file attachment to a generic page saying
This page cannot be displayed.
<LI id=task1-1>Make sure the web address http://www.sevenforums.com is correct.<LI id=task1-2>Look for the page with your search engine.<LI id=task1-3>Refresh the page in a few minutes.

Thanks

A:Windows Update Failure to install, error code 80070308

llanita take a look at this Windows 7 update fails with code 80070308 - Microsoft Community

Personally I set my updates to let me know they are available and I look at them before I install anything. But it is a personal choice my thoughts are that given updates can cause problems I like to know what I have downloaded and then can go back to dedicated update points get rid of problems. see pic

Having posted the above I think these would not be a bad thing to try

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < use the /f option in Option 2 ifnecessary

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

download from bleeping computer ? delete any rubbishthese find.

9 more replies
Answer Match 67.62%

Hi, this particular update has refused to install correctly since the 14th. Other updates have installed with no issue. Ran SURT and tried to manually install it from direct download.

Any help much appreciated.

A:Error code 80070490, Update 2790113 fails to install

Hi zatoichi,

As you've correctly isolated, Windows in your system has failed to install an update on numerous occasions:

Code:
2013-02-28 17:06:12, Info CBS Failed to get session package state for package: Package_3_for_KB2564958~31bf3856ad364e35~amd64~~6.1.1.1 [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
Though unlikely, you may still try resetting the 'Windows Components' to see if that helps: How do I reset Windows Update components?

If the issue persists, please try a manual install: http://www.microsoft.com/en-us/downl...ng=en&id=27653

You may also refer to the following 'Microsoft Article' that recommends 'Windows Repair' in this case, if 'System Update Readiness Tool' fails to fix it: Windows Update error 80070490

Hope this helps.

5 more replies
Answer Match 67.62%

So I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.

But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got
the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it. (im a kinda noob on it anyways)

Any help would be appreciated!

A:Windows 8 fails to install EVERY update, error code 0x800f0922

Hi Septura,
After checking the log you provided, I find two error messages.
1. failed to set task enabled status., error = 0x80071A91
2. WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
Please use the following command to fix your issue.
DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess
Note: Replace the C:\RepairSource\Windows placeholder with the location of your repair source.
Best regards,
Fangzhou CHEN

8 more replies
Answer Match 66.78%

I am downloading the update manually. Have others had the same issue with windows update not showing the update?

I'm not sure my WU is working because of this.

A:Windows Update does not download and install the anniversary update.

Originally Posted by Alicia J


I am downloading the update manually. Have others had the same issue with windows update not showing the update?

I'm not sure my WU is working because of this.



Have you tried this - https://support.microsoft.com/en-gb/...setting_client

Recommended today by another forum member - may just work

more replies
Answer Match 66.78%

KB2909921
KB2912390
KB2916036
KB2908816
KB2913270
KB2919907
KB2922300
KB2923768

Above updates wont install,, tried almost everything, clean boot, etc. I'm running Windows 8.1 64
Please Help
Thanks
Michael

A:8 Windows Update wont install Error Details: Code 800F0922

Originally Posted by koymik


KB2909921
KB2912390
KB2916036
KB2908816
KB2913270
KB2919907
KB2922300
KB2923768

Above updates wont install,, tried almost everything, clean boot, etc. I'm running Windows 8.1 64
Please Help
Thanks
Michael



Hi Michael:

Did you try to install the update again manually?
There are some errors that are simply a matter of bad timing, and they can be caused by busy websites and slow Internet connections, or a number of other factors. Sometimes you can fix these problems by trying to install the updates again.
1. Open Windows Update by swiping in from the right edge of the screen (or, if you're using a mouse, pointing to the lower-right corner of the screen and moving the mouse pointer up), tapping or clicking Settings, tapping or clicking Change PC settings, and then tapping or clicking Update and recovery.
2. Tap or click Check now, and then wait while Windows looks for the latest updates for your PC.
3. If updates are found, tap or click Install updates.

5 more replies
Answer Match 66.78%

Hi there,

I'm having an issue with a laptop running Windows 7 Home x64 SP1. It has failed to install Windows Update Agent 7.6.7600.320 and keeps trying every time I try to run updates.

I've downloaded the installer and tried to run it manually, but that gives me the error 0x80070002

I've attached my CBS log from the last time I attempted the install. Any help will be much appreciated!

A:Windows Update Agent install fails, Error Code 800F081F

The v320 update installer isn't commonly available (unless you know where to look) - where did you attempt to download it from?

Here's the error-sequence from your log...

Code:
2014-09-10 23:15:06, Info CBS Exec: Staging Package: WUClient-SelfUpdate-Core-UIComp~31bf3856ad364e35~amd64~pt-PT~7.6.7600.256, Update: UI, PinDeployment: amd64_microsoft-windows-w..oyment-languagepack_31bf3856ad364e35_7.6.7600.256_pt-pt_76bae7f7dbc23d63
2014-09-10 23:15:06, Info CBS Calling client to resolve source, cannot find file 'wuaueng.dll.mui' at path: \\?\C:\Windows\Servicing\Packages\amd64_microsoft-windows-w..ient-core.resources_31bf3856ad364e35_7.6.7600.256_zh-cn_8aefebe76d4c7c4f\wuaueng.dll.mui
2014-09-10 23:15:06, Error CBS Exec: Failed to pre-stage package: WUClient-SelfUpdate-Core-AdmComp~31bf3856ad364e35~amd64~pt-PT~7.6.7600.320, file: wuaueng.dll.mui, source: \\?\C:\Windows\Servicing\Packages\amd64_microsoft-windows-w..ient-core.resources_31bf3856ad364e35_7.6.7600.256_zh-cn_8aefebe76d4c7c4f\wuaueng.dll.mui, sandbox: (null) [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10 23:15:06, Info CBS Failed to gather all required files. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10 23:15:06, Info CBS Failed to gather all missing files for package: WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320 [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10... Read more

4 more replies
Answer Match 65.52%

I tried to update using the usual method, as the new update was present. I tried twice, and it failed twice. 2nd time it became clear that the Razer Synapse software (recent purchase of a discount keyboard) was causing the issue. So, I've uninstalled that. Fine, so now I go to hit the update button again, but Windows tells me it's up to date? I know for a fact it isn't, because it just told me it could not install the update and reverted to the previous version. What gives?
So, I can see it has downloaded the update to the '$WINDOWS.~BT' folder, but it will not trigger by running the 'setup.exe' file. My question is, how do I proceed now? How do I trigger the update I've downloaded to install, when Windows seems to have decided it's already installed it?
Ruddy Windows 10...

A:Anniversary Update Install - Help!

Originally Posted by AndyCalling I tried to update using the usual method, as the new update was present. I tried twice, and it failed twice. 2nd time it became clear that the Razer Synapse software (recent purchase of a discount keyboard) was causing the issue. So, I've uninstalled that. Fine, so now I go to hit the update button again, but Windows tells me it's up to date? I know for a fact it isn't, because it just told me it could not install the update and reverted to the previous version. What gives?
So, I can see it has downloaded the update to the '$WINDOWS.~BT' folder, but it will not trigger by running the 'setup.exe' file. My question is, how do I proceed now? How do I trigger the update I've downloaded to install, when Windows seems to have decided it's already installed it?
Ruddy Windows 10... try this tool: https://support.microsoft.com/en-us/...troubleshooter

1 more replies
Answer Match 65.52%

The Win 10 AU fails to install with error:0x80070002-0x20009.I have a cloned SSD and use the old HDD for data as Drive D:I've tried the standard update and also the MediaCreationTool.exe, I have also triedto install with the HDD disabled. Any help ?




P50 20ENCTO1WW | 6700HQ | 32 GB RAM |M1000M |512 SSD

More replies
Answer Match 65.52%

Since my Windows 10 Anniversary download I have been getting the error message" Product Activation error code 1-80004005." when opening the programme which is strange since the programme has been working perfectly since purchase in 2007. I am allowed 30 minutes of use and then it shuts down. I have the Activation code on the original box and discs but there is no way of inserting it into the programme as far as I can see. Can anyone advise me what to do please. So far I have had lengthy chats with Microsoft Support (Games) who are amazingly clueless as to what I can do. Thanks.

More replies
Answer Match 65.52%

I tried upgrading three different desktop computers with the August 2nd Windows 10 Anniversary Upgrade. I used the Windows 10 Assistant from the Microsoft website for this upgrade. Problem is that it begins the process then eventually stops and displays a notification that the upgrade can't continue due to "Error 0x80070057". I searched to find out what this is and found a lot of hits for a variety of things that have been attributed to this error code, but nothing specific to this upgrade. I\m sure that I'm not the only person who has had this happen. Does anyone know if there is a solution or way to work around this problem? I found two files that apparently were dropped onto my computers when I tried to perform the upgrades. [ Win10Upgrade28084 ]. One was on my hard drive and the other, oddly enough, was found on my network drive. No idea how that one got there. I've tried running them again, but get the same error message each time. When the upgrade didn't appear as a regular update, I went to the Microsoft website and found the Windows 10 Assistant and thought I'd give that a try. I was surprised that it didn't work. Then again, I had similar things happen back in July 2015 but still eventually managed to get the free upgrade to 10 without too much difficulty. In fact 10 has worked just fine for me.Anyway, if anyone has any suggestions, I'd appreciate hearing from you. Thanks! message edited by casper06067

A:Error code 0x80070057 updating to Win 10 Anniversary Upgrade

Did you look at the comments here: http://www.windowscentral.com/simpl...Doing the best I can here... And remember, there's always more than one path to success. :)

7 more replies
Answer Match 65.1%

When trying to do the update I am told that my version is 10586 and that I need to be at 14393. I tell it to go ahead and do the update and it gets to 2% and then it tells me something went wrong and gives me error code 0x80070005.

A:Windows 10 anniversary update won't install

I know this is odd, but I saw this on another site and it has worked for me on 2 computers so far. Click on the anniversary update, let it check your system and then let it download the update. As soon as it starts to update, disconnect the wireless or LAN. It was able to update after this. Once it got past this section, I connected to the wireless again. About to do this with my 3rd computer. None were able to update before.

2 more replies
Answer Match 65.1%

Hello all,

Need some help... I had Windows 7 Ultimate on my pc then, I got the free copy of Windows 10 per Microsoft.
My system now is Windows 10 Pro version 1511 OS build (10586.633)
The anniversary update fails every time..... things that I have tried:
completely pause (stop) Norton Anti-virus
completely pause (stop) Malwarebytes
Clean boot

I build this pc about 5 yrs ago, never had a problem; here are the specs:

Intel i7 CPU 930 @ 3.0 ghz
12gb DDR3
Windows 64 bit
256 gb SSD drive for OS
2 tb drive for data

Any help will be appreciated;

Thanks

More replies
Answer Match 65.1%

GDRDU: Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3176938)
Failed to install.
Installation went up to 95% and then stuck on that for some time and then the computer restarted and said reverting to previous version.

More replies
Answer Match 65.1%

Product Name: HP Envy 15-j122txPre-installed OS: Windows 8.1 New clean OS installation : Windows 10 pro  I have bought Samsung 850 pro 1 TB SSd  for my hp envy notebook.I am going to replace an old 1TB HHD by a new 1TB SSD Samsung 850 EVO on my HP Envy Touchsmart 15 j122TX. how to installing the SSD on my HP plus clean installation of Windows 10 pro, setting up the OS to ensure a smooth performance? Please give me step by step instructions as I am un-experienced. Thank you for your support.  MY notebook has 24 msata SSD install can I use msata with my new SSD after the clean installation of Windows 10 pro?    

A:install windows 10 anniversary update on SSD

Here is the Service Manual: Manual Pages 41-47 show removal of the service bay door and replacement of the hard drive. Just install the SSD in place of the hard drive. You can remove the mSSD drive. It is not useful with a main SSD drive. It was designed only to speed up a regular mechanical drive.  Do you have a Windows 10 installation disk? You can download an image file and create a Windows 10 DVD or thumb drive installation media from the Media Creation Tool Microsoft webpage.  Post back so I can see if you are with us here. We can take this a bit at a time rather than my writing War and Peace and you not understanding something. 

1 more replies
Answer Match 65.1%

how to install FM radio after Anniversary update is installed ?

More replies
Answer Match 65.1%

program installs but system won't reboot

More replies
Answer Match 64.26%

I have an xps 8700 desktop.
Will windows find most of the drivers?
If I enter my service tag and go to drivers will all the drivers that I need be there?
(I had an old Dell with Windows XP. I did a clean install on it once. I think there was one device that was listed as unknown. I put in the dell driver disk and it install most of the missing drivers I needed, as I recall. But you no longer get disks with Dell computers.)
Is there a place to download a drivers disk?
If I open Macrium Reflex, it shows that there are 5 partitions. One is the c: drive, one is PBR Image, one is wintools (I think). What are the other 2? They must be Dell partitions as I never created any partitions.
I looked up the model number of my harddrive and it appears to be a standard hard drive. Somebody said that there could be a small SSD that is used to help the other drive boot faster. If there was such a drive, wouldn't I see if I opened Optimizer? Or in Macrium Reflect?
The model number of my harddrive is WD10EZEX

A:If I have to do a clean install to Windows 10 Anniversary update...

Macrium just finished the backup, so I just checked and there are 7 partions
1. ESP
2.DIAGS
3. None - unformatted 128/128 (must be a windows thing as my second drive that I added has this too)
4. Winretools
5. OS (C)
6. None- primary 334.2/450
7. PBR Image

3 more replies
Answer Match 64.26%

Trying to install the KB3185614 (anniversary 1607) update, but getting the 'couldn't complete the updates undoing changes' messages after 100%.  System log shows a 0x8024200D error code. Tried.... 1. uninstalling all anti-virus apps, inc luding cleanup tools afterwards.2. deleting the SoftwareDistribution folder contents.3. downloading the update manually from the MS catalog site and installing from that4. doing an upgrade install using the latest 1607 iso on a dvd from within Windows Anyhting else I could try before I go for the last resort of a clean install using said dvd?. thanksjoe

More replies
Answer Match 64.26%

I've having trouble installing the Windows 10 Anniversary Update.

The installation of the update seems to get to about 70% complete, then I get a BSOD saying "kernel security check failure".

Then the update system automatically rolls back my Windows installation to the pre-Anniversary Update version.

Not sure which driver is causing the problem. Hopefully, the attached logs will help to narrow down the problem.

Thanks for any help.

More replies
Answer Match 64.26%

My first impressions:

Pros:
Seems a bit faster overall - I did a complete system image backup in 00:02:09 (previously took 00:02:35)
OS install uses less space (at least for my installation)
Event viewer shows no new instances (I had two known issues before and they are still there)
Reapplied many of Brinks tutorial suggestions and most of them worked... except this one:

gpedit management notice is missing (second screen shot) so I can't say for sure if it will work (or not).

Cons:
Win10BGChanger1.2.1 still doesn't work (as expected)
Sound removed from notifications by default (not a con for me though)
Installed default audio playback to my headset - changed to speakers
All in all, working well so far (for me).

A:Anniversary Update - Clean Install - First Impressions

I like everything except the removal of being able to skip the lock screen on wake from resume

more replies
Answer Match 64.26%

Running Windows 10 1511 on a 500gb SSD - all works 100% Have installed 1607 twice now works OK and seems Ok for a few hours and then I find all sorts of problem occouring - programs will not run, even Ctrl/Alt/Delete does not work and so on and I end up going back to 1511 wg#hich I have kept a copy of.
At present I have decided to abandon 1607 and continue with1511 - will this still be supported with security updates?
Martin

More replies
Answer Match 64.26%

I am unable to install the Windows 10 Anniversary Update, keeps failing after second restart (at around 75%).

Machine is a relatively recent custom build, a little over 12 months old: Gigabyte B85M-HD3 (rev 2) mobo, i5-4460 CPU, Geforce GT 740 2GB GPU, 8GB RAM, Samsung 850 EVO 250GB SSD. Been running Windows 10 Pro 64-bit (1511) with no problems. sfc /scannow gives a clean bill of health. No apparent issues with drivers, Device Manager shows all good.

Tried installing via Windows Update and also via the downloaded Windows 10 Upgrade executable... same result. Everything goes well up until the second restart and then the start screen just hangs with the little circle of dots twiddling around indefinitely - up to 8 hours - and no hard drive activity whatsoever.

The only USB devices connected are my keyboard and mouse. I've tried installing in Clean Boot mode with all startup items and non-Microsoft services disabled... no difference. Tried increasing the size of the System Reserved partition from 350MB to 500MB... no difference. Tried installing while disconnected from the internet... no difference.

Downloaded the Windows 10 1607 ISO (which includes the Anniversary Update) and tried an upgrade install in Clean Boot mode, both with and without internet connection - installation froze at exactly the same place, after the second restart. Received the following error message upon recovering to previous version:


No idea where to go from here. Clean install is definitely... Read more

More replies
Answer Match 64.26%

First of all, I'm coming from Windows 7. I'm one that was able to upgrade to Windows 10 for free.

Am I able to perform a clean install of Windows 10 using the same license I currently have on Windows 10? How would I obtain my current key, then? Is it s imply the Product ID listed under Control Panel>System ?

Can I download a copy of the installation media which already contains the AU update?

How would I install Windows 10 onto a M.2 drive? Is it as easy as picking the hard drive to install Windows on during setup?

A:How do I clean install Windows 10 Anniversary Update?

You could just use "reset my pc".

Alternatively, create bootable usb stick or dvd

Windows 10

Boot from it, choose custom install, delete all partitions on drive you want to use (backup data first of course), and skip key entry as not needed as you have already upgraded.

1 more replies
Answer Match 64.26%

My first impressions:

Pros:
Seems a bit faster overall - I did a complete system image backup in 00:02:09 (previously took 00:02:35)
OS install uses less space (at least for my installation)
Event viewer shows no new instances (I had two known issues before and they are still there)
Reapplied many of Brinks tutorial suggestions and most of them worked... except this one:

gpedit management notice is missing (second screen shot) so I can't say for sure if it will work (or not).

Cons:
Win10BGChanger1.2.1 still doesn't work (as expected)
Sound removed from notifications by default (not a con for me though)

All in all, working well so far (for me).

More replies
Answer Match 64.26%

JOHN_COMPUTER-07_08_2016_191929_84.zipI'm having trouble installing the Windows 10 Anniversary Update.

The installation of the update seems to get to about 75% complete, then I get a BSOD.

Then the update system automatically rolls back my Windows installation to the pre-Anniversary Update version.

Not sure what is causing the problem.

Using dm_log_collector produces an empty zip file which is attached.

Thanks for any help.

If any other files needed please state and will attach.

More replies
Answer Match 64.26%

Greetings fellow Windows enthusiasts,

I was asked to update our Windows 2008 R2 server from IE 10 to IE11, and it will not install properly.  I have looked up several solutions to this issue, so far nothing has worked.

I disabled McAfee HBSS in safe mode, restarted the PC and tried to run Windows Update managed by a WSUS server.  The update gets approved and pushed out to the 2008 R2 server.  It downloads IE11, tries to install, then fails/errors-out at the last
second.   I have tried this a few times, rebooted and either get error code 9C47 or 9C49.  


Some of the fixes I have tried:


I turned of internet connectivity and the anti-virus, that did not workI tried the Windows Update repair tool, that did not work  I tried the Windows System Readiness tool, that did not work   I tried to scan the system files for errors with sfc /scannow
and that did not work  I tried installing the other updates first, restarting and it still fails I removed the server from WSUS and re-added it and it will not update   I tried the stand-alone IE11 installer, and it fails at the very last step and then gives me an error with a link to troubleshoot IE installations   I have uninstalled IE10, and now am totally stuck with the absolutely horrible experience of IE9 SURT returns no errorsSFC returns no errors
Technical information:

I have checked the Windows Update log file, the last errors that I found ... Read more

More replies
Answer Match 63.42%

Hello to everyone.
i have sucessfully installed the update Anniversary of windows 10 x32 to my tablet what i have is an nextbook of 7inches which has 16GB of storage and just if try to update will get the message of not enough space to do the update, in this poost will detail how to do the install without die on the attempt. the time that takes in do the update is about 4-6 hours due the low specs of this tablet, can also be for any tablet that has 16GB storage.
Materials to use list
an empty micro SD card of 32-64GB of capacity, i used an micro sd card of 64GB for this procedure.
i say empty because i have tried use an card with files inside and the tool media creator erased all my files so i do emphasis in this
preparation of the SD card memory
in an card reader in another computer download from the Media tool creator the version of windows 10 that your computer use, and use the SD card to store the version of windows from media tool.
i know many tablets has OTG capabilities but have to keep in mind the following.
if your tablet gets the battery charged via an micro USB connector, then you must use the method of do the upgrade by Micro SD card, since the installation will take 3-6 hours so need keep the tablet powered and plugged to the wall socket all the time , if ran the set up by battery will get no power in no time and will brick your tablet forever, or in the best of the chances will get back automatically to the wind... Read more

More replies
Answer Match 63.42%

I have windows 10 installed on Lumia 1020 with no problems very happy with it just wanted to know if anniversary update could be installed thank you.

A:can windows 10 anniversary update install on lumia 1020

Originally Posted by Windows Central Question I have windows 10 installed on Lumia 1020 with no problems very happy with it just wanted to know if anniversary update could be installed thank you. It can: [Guide] Installing Redstone on Unsupported devices (X2X Series)
Your phone already got Windows 10 last Threshold, so it could do that in the shortest way (see forum: )
" Windows 10 Mobile 1) Any Nokia Lumia X2X Series (with and without SD card) running the below OS versions 10586.10710586.545
Users who're on these versions can get Redstone in a much simpler way. You can stop here. 2) Files needed a) InteropTools v 1.8 - Here b) DHTUpgrade Advisor - Here 3) Go to developer options and enable developer mode. After that, a) Copy the appx files from "Dependencies" and "InteropTools_Beta_1.8_0.0.160.0_arm.appxbundle" to your phone and install them. b) Now open InteropTools (beta) >> goto "INTEROP UNLOCK" section >> toggle on the Restore NDTKSvc. 4) Now similarly install the files from "DHTUpgrade Advisor" and "Dependecies" via file explorer. a) After installing, Open DHTUpgrade Advisor, select backup and then choose "Allow Update 512MB devices" or "Allow Update" b) Crosscheck if your device info details are changed or not in the "About" tab. If not, reboot your phone. 4) Go to windows update and check for updates. a) If the update isn't offered, then install &q... Read more

2 more replies
Answer Match 63.42%

I have a problem after installing the Anniversary Update of Windows 10. This post concerns the process which involves a clean re-install of Windows 10 by the method which includes downloading and running Microsoft's Media Creation Tool, choosing "Create Media for another PC". This downloads an ISO of Windows which, when put on a USB stick, can be used to boot the computer and clean-install Windows 10 (no license key required because Windows 10 was already running, although I have my license key.) I am told that this produces a "very clean" install which would clear any glitches in the previous install. Programs would need to be re-installed.

My question please: assuming that the Media Creation Tool will be downloaded after the Anniversary Update was installed, will it produce a Windows 10 + Anniversary Update version ?

Thanks for any help.

PS: I wasn't able to create a Macrium System Image which would include the Anniversary Upgrade because my problem occurred immediately after the Update. If you are interested in what that problem is, go to:

http://www.tenforums.com/installation-setup/58571-anniversary-update-search-not-working-properly.html

A:Clean Install of Windows 10 including Anniversary Update

I used the MCT tool this morning and i can assure you its the 14393 build. You will find some windows updates waiting at the end of it.

1 more replies
Answer Match 63.42%

This box came with windows 7 64 bit Home OS.  I recently upgraded to the windows 10 OS in order to take advantage of the latest OS.  Around August the windows 10 anniverary update became available but upon attempting multiple times it have failed.  I receive a 0xc1900200 error and a reference to the system reserved partition not being big enough.  I don't seem to see a partition called System Reserved partition but have tried to expande what looks like a 100 MB SRP, using Partition Magic.  It doesn't let me change this 100 MB partition.  The PC runs fine but because of MS auto updates, which I need to keep other MS software up to date, I get regular failures of the Anniversary update release.

More replies
Answer Match 63.42%

So this is very frustrating... I'm trying to install the anniversary update, and used the upgrade assistant. But when it restarts, it flashes for just a second the update screen, then shuts off and restarts again and loads without the update...

Any idea what I did wrong? I even reset the PC and it's still causing issues...

Any help would be appreciated.

More replies
Answer Match 63.42%

Windows 10 Anniversary Update Might Hide Partitions After Install

One of the issues experienced by users after installing the Windows 10 Anniversary Update concerns partitions, as many of those who upgraded their computers reported that a number of partitions disappeared from File Explorer.

Furthermore, all partitions show up as RAW in Disk Management, which makes most people believe that all their data has been removed and nothing can be recovered.

Microsoft, however, claims that this is just a bug discovered in the Windows 10 Anniversary Update install system, and while no files are lost, it?s critical for users not to try to recover anything with third-party apps because this could lead to completely breaking down the partitions and removal of data.

?Microsoft is aware of this issue and is working on a solution to be released through Windows Update. Any data you have stored on the affected partition is still there. We recommend that you not try to recover or otherwise write data to the affected partition, nor should you format the partition,? the company says.




You can also downgrade in the meantime
Microsoft?s Sharath Srinivasa goes on to explain that a patch will be released to users when it?s available and states that users who do not want to wait for it can always downgrade to their previous Windows version. Partitions should be then just as you created them, with all files once again accessible.

For the moments, there?s still no timing on wh... Read more

More replies
Answer Match 63%

Hi all,

Wondering if anyone else has experienced an icon display issue on their start menu with the 1607 update?

I have just clean installed (and fully updated) the 1607 Anniversary Update on 2 PC's and both are experiencing an identical issue with their start menu. The problem whilst seemingly minor is especially annoying given that I have performed the updates for some friends and it is a matter of pride to me that I hand over any such systems in a perfect state.

The Start Menu program list (A - Z list) as well as the "most used" and "recently added" lists contain icon tiles for the installed programs. On both systems around 25% of these tiles display a generic "blank page" image rather than the icon image associated with that program. That said the tile in question opens it's associated program and it's text label also displays correctly.......as I said earlier an annoying niggle!

By now you are all thinking ah its a icon cache failure just rebuild the icon cache!! I have of course rebuilt the icon cache following the instructions contained in option 2 of the tutorial here www.tenforums.com/tutorials/5645-icon-cache-rebuild-windows-10-a.html as well as deleting the C:\Users\<Username>\AppData\Local\IconCache.db file neither of which corrects the issue.

Additionally, I have manually, refreshed several of the icons (right click button tile > more > open file location) by changing and then reverting the .ico file through propert... Read more

More replies
Answer Match 63%

Hello,I recently purchased a new 2016 model Spectre x360 (PN X7V20UA). It came running Windows 10 1511, and I would like it to be running 1607 (Anniversary Update). However, the update to 1607 is not being offered inside of Windows Update. I've installed everything that was available, include today's November patch releases, to no avail. Windows Update shows "Your device is up to date." This link http://arstechnica.com/gadgets/2016/10/hps-new-spectre-x360-is-probably-the-best-pc-laptop-around/ says that the 1607 update is being blocked on this model temporarily due to driver compatability issues. I tried to get confirmation from HP twitter support about if this was true or not, but wasn't able to get much help. Can someone please confim this?

More replies
Answer Match 63%

Hi,
I have a Packard Bell OneTwo S3221. It came factory installed with W7.

I upgraded to W10 last year after difficulty - upgrading to W10 via Windows update would not work, kept installing to a certain percentage then would reboot to a blank screen and freeze indefinitely, I needed to power off then on restart it would roll back to W7. This happened repeatedly despite trying all sorts - clean boots, uninstalling antivirus and updating drivers, etc.

I finally installed W10 using Media creation tool. Everything ran fine. But when the big update came in Novmember 2015 that failed to, in the same way as above, however all other monthly windows updates install fine.

Windows update never tried to push the Nov 2015 update on me again - I'm still on build 10240 now.

I was prompted to install the anniversary update by Windows update last week but that also failed in the same way as above. Download ok and begins installing fine, then at some point after 50% complete I get the blank screen indefinitely and have to power off, then it reverts back to W10 build 10240.

Having checked Packard Bell website my model is not supported by Packard Bell for W10, and they are not providing any drivers for it. This may explain the problems.

Can anyone suggest how to find out what the problem is and if there is a solution? I've tried looking in Update history for error codes, but there is none, it doesn't even show an attempt to install the anniversary update. Like i said every other ... Read more

A:Can't install Windows 10 Anniversary update, stuck on build 10240

Hi, simplest answer is avoid windows update and create the appropriate bootable medium or iso and use it as you did before.
As you know plenty of people have this sort of problem.

Note that the upgrade can introduce new issues for some (search the net), and some are delaying because of that. Older machines like yours could well exhibit such problems. So before you make this change, I recommend you create a disk image of your existing setup - a procedure you should do routinely anyway- to give another way of restoring your system.
E.g. Macrium Reflect (free) + its boot medium + external storage for images.

It's best to have a physical bootable medium as it covers all of:
a. if you need to repeat the installation
b. as a bootable medium for recovery options
c. in case you need to do an in-place upgrade repair install

without taking up disk space.

0 more replies
Answer Match 63%

Hi all,

Wondering if anyone else has experienced an icon display issue on their start menu with the 1607 update?

I have just clean installed (and fully updated) the 1607 Anniversary Update on 2 PC's and both are experiencing an identical issue with their start menu. The problem whilst seemingly minor is especially annoying given that I have performed the updates for some friends and it is a matter of pride to me that I hand over any such systems in a perfect state.

The Start Menu program list (A - Z list) as well as the "most used" and "recently added" lists contain icon tiles for the installed programs. On both systems around 25% of these tiles display a generic "blank page" image rather than the icon image associated with that program. That said the tile in question opens it's associated program and it's text label also displays correctly.......as I said earlier an annoying niggle!

By now you are all thinking ah its a icon cache failure just rebuild the icon cache!! I have of course rebuilt the icon cache following the instructions contained in option 2 of the tutorial here www.tenforums.com/tutorials/5645-icon-cache-rebuild-windows-10-a.html as well as deleting the C:\Users\<Username>\AppData\Local\IconCache.db file neither of which corrects the issue.

Additionally, I have manually, refreshed several of the icons (right click button tile > more > open file location) by changing and then reverting the .ico file through propert... Read more

A:Anniversary Update - Clean Install. Start menu anomaly

Hi, some ideas - you may have come across these already... fortunately this hasn't happened to me
(Yes, it says tiles, but appears to be talking about the icons)
Windows 10: How to fix blank tiles on Start Menu

Stardock products:
Windows 10 - Blank start menu icons - Super User

How does it look if you create a new user for test purposes?

P.S. I don't use Win 10's start menu - I use Classic Shell (free) to avoid all the issues and actually have a properly expressed start menu that I don't have to fight with. Eg. in Win 10's version of my Start Menu I see
Help
Help
Help
Help
...

- all shortcuts from individual subfolders for different programs, extracted and listed alphabetically. Some help that is.

more replies
Answer Match 63%

I have tried multiple times times to install the Windows 10 Pro, Anniversary Update to my desktop computer, a Dell Inspiron 560. Every time, the result has been a computer that will not start-up, ie. Windows does not appear to load/run. I have tried the WURepair tool and tried to repair the System Registry HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Windows NT>ProfileList, all to no avail. I have had to restore my system with an previous Image to get it operational again. Has anybody else had this problem and been able to come up with an answer?

A:Trouble trying to install Windows 10 Anniversary Update, version 1607

Hello JRAllen72653 Welcome to the Ten Forums!

One advice I can provide here would be to try a different method for either update by upgrade or planned clean install which doesn't seem to be what you have been looking for. When the Redstone 1 update didn't even arrive here for 3 separate desktops as well as a recently new laptop where 10 came already on not seeing the update still lead to fail of the MC Tool to see the immediate online upgrade take place or create the usb media needed.

Twin solutions were then sought! The first in order to see all machines updated was to download the "windows.iso" by way of the MC Tool which equals both the 32bit and 64bit flavors for both the Home and Pro editions. We call that a "4 in 1" type of download that covers everyone.

The second item on the agenda did opt to use a 3rd party program not the Windows option to mount the iso downloaded onto each machine or run from a flash drive where the setup.exe main executable would be manually started to watch each upgrade install take place. Once all systems were set which included one desktop only lately being upgraded from 7 Home Premium to 10 Home and then still waiting for the update to go on before return to owner was to visit a MS download iso type page to grab both the 32bit and 64bit smaller Dual Edition iso downloads to keep onhand.

For a final fix to all older already made up flash drives for the Threshold 2 update last November as well as for Windows Insider P... Read more

3 more replies
Answer Match 62.58%

Trying to run the update, everything seems to run fine, and then I get a message about uninstalling an app that isn't compatible, but it isn't listed? I'm currently on Windows 10...
I've attached a screenshot.
I've tried doing a clean boot and still got the same results.

A:Anniversary Update Error

Originally Posted by maevinj Trying to run the update, everything seems to run fine, and then I get a message about uninstalling an app that isn't compatible, but it isn't listed? I'm currently on Windows 10...
I've attached a screenshot.
I've tried doing a clean boot and still got the same results. Do a antymalware cleanin and check old progrs forgotten in you pc

1 more replies
Answer Match 62.58%

Install error code 0xc1900200
What is the problem??

More replies
Answer Match 62.16%

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS Log
CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran
Malwarebytes
JRT.exe
Adwcleaner
Hitmanpro_x64

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

A:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

http://www.sysnative.com/niemiro/apps/SFCFix.exe
http://go.microsoft.com/fwlink/?LinkID=52012
and sfc /scannow

copy/paste the results please.

Roy

1 more replies
Answer Match 62.16%

I have an existing Windows 10 Pro installation. My partitions are:
system reserved: 500 mb
C: boot, page file, primary partition
E: logical drive
F: logical drive
I would like to do a clean install with WIN 10 Anniversary Update (1607), and convert my disk from BIOS to UEFI.
What modifications would i need to do to GPTgen while upgrading and maintaining my programs and data?

Thanks

A:clean install with anniversary update & disk conversion BIOS to UEFI

Modifications....none.

Windows 10 already utilizes GPT partitioning....on a clean install. The only thing you would need to do is change your BIOS firmware from Legacy BIOS to UEFI BIOS. You will need to confirm that in your BIOS. Or to check with in windows.....in the search bar of cortana, type system information and when the window pops up, scroll down to BIOS mode......here's mine.

2 more replies
Answer Match 61.74%

Trying to update using Windows 10 Update assistant as automatic update not showing yet. It checks my system then downloads ok but once it starts it stops at 1 or 2 % and says "Something waent wrong " and gives error code 0x80070057.

All previous updates have been fine.

A:Anniversary Update error 0x80070057

Did that for me so i went the media creation tool way to install it

1 more replies
Answer Match 61.74%

Trying to update to the Anniversary Win 10 and after about an hour of "thinking" it said that it couldn't finish because of Error 0xc190012f. Currently the PC is running Win 10 with no outstanding updates, as far as I know.

Anyone else get this error or have a suggestion as to how to proceed?

Gerry

More replies
Answer Match 61.74%

I just installed the Windows 10 anniversary upgrade.Wneh I tried to Scan a document, selected document scan, it tried  for a while and came up with the following error: Request to capture Moment failed with new HPPC_RESULT value as [1.829.88a.0] (GET_FRAME_TIME_OUT) I installed the Sprout Workstation update to no avail, I still get this error, cannot scan documents.Any idea Guys??? Thanks,

More replies
Answer Match 61.74%

Hi and greetings from Sweden!

New on the forum, long time lurker.

So my problem. Windows 10 wont update. Error code "0x800703ee". Things i have tried so far:
Cleaned and restarted Windows UpdateSFC /ScannowFollowed this guide: http://answers.microsoft.com/en-us/w...d-8928bd7831beTried updating via ISO

A while ago i had to recreate my EFI parition, perhaps it has something to do with it?
The last thing is to do a clean install, but such a hassel with all my hours of customization down the drain.

Thank you in advance.

More replies
Answer Match 61.32%

I tried installing the Anniversary update using the Media Creation tool and I get this error when I log back in after the setup reverted my installation:

0xC1900101-0x3000D
The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATA operation

Any help would be greatly appreciated!

More replies
Answer Match 61.32%

On my Son,s computer . Before the update I made a image with macrium reflect , updated and the computer will not run , I keep getting a attempted switch from dcp error after anniversary update .. Ideas , thanks .

More replies
Answer Match 60.48%

Hi guys. I am seeing this error twice on every boot since upgrading (even a clean install doesn't clear it).


Code:
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 04/08/2016 02:03:45
Event ID: 10016
Task Category: None
Level: Error
Keywords: Classic
User: LOCAL SERVICE
Computer: Chris
Description:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{6B3B8D23-FA8D-40B9-8DBD-B950333E2C52}
and APPID
{4839DDB7-58C2-48F5-8283-E1D1807D0D7D}
to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="0">10016</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2016-08-04T01:03:45.289910000Z" />
<EventRe... Read more

A:Permissions error (CLSID/APPID) since Anniversary Update

Same here. Upgraded from Win 7 Ultimate to Anniversary Edition using the Media Creation Tool.

8 more replies
Answer Match 60.48%

Windows 10 1511 will not update to 1607 by any method. Updates always complete to 100% then revert. Computer is a Dell Vostro 1720.

Background: The computer never appeared to update automatically, but there was never any error code. I tried to use the Windows 10 upgrade assistant. The upgrade would go through download and install to 100% but then restart back to version 1511 with no error message. Finally, I downloaded the 1607 iso, extracted it to my hard disk, and installed from there. Again the update went to 100% and then reverted back to 1511, but this time it gave the error message 0xC1900101 - 0x20017 "The installation failed in the SAFE_OS phase with an error during BOOT operation."

I have found several threads about this error, and it seems most likely that there is a driver conflict of some kind. I have looked at the setuperr.log from $WINDOWS.~BT/Sources/Panther/ directory but I do not see what is causing the error. Can anyone help with guidance on this?

setuperr.log text:

2016-09-21 19:53:52, Error CONX Windows::Compat::Appraiser::Utilities::SendRequest (1259): Failed to connect to the internet or send request: [12007].[gle=0x80072ee7]
2016-09-21 19:53:52, Error CONX Windows::Compat::Appraiser::Utilities::ResolveForwardLink (1319): Failed to send request using default proxy[gle=0x80072ee7]
2016-09-21 19:54:32, Error CONX Windows::Compat::Appraiser::Utilities::SendRequest (1259): Failed to connect to the internet or send request: [12007].... Read more

More replies
Answer Match 60.48%

I have been attempting to upgrade windows 10 pro, from version 10240 to version 1607 (anniversary update). It looks like I have been stuck on 10240 so some time. I have tried both the Windows 10 Upgrade Assistant and the media creation tool (ISO - both from the HDD and bootable USB). I get to 96% and, boom, every time it resets and restores my system to where it was before the upgrade started. The error I get is as follows:
0x8007042B - 0x4001E
The installation failed in the SECOND_BOOT phase with an error during PRE_OOBE operation.
I have searched for an answer and haven't found one. I have tried to trouble shoot it as best I can by unplugging everything but my keyboard/mouse, updated chipset, etc.. MS techs haven't been much help. Any thoughts? I would rather not have to nuke the system. I hate having to reinstall programs (adobe is the worst). Any help is appreciated.
Thanks.

More replies
Answer Match 60.48%

Hello,

My DU meter stopped reporting and collecting data after the 10 Anniversary Update. As you can see from the first screen shot my taskbar used to display the upload/download speeds but now it's just black

I tried reinstalling DU meter but no luck.

Win10 Anniversary update x64
Intel Graphics
4 GB Ram

A:Windows 10 Anniversary Update and DU meter Reporting Error

Hi, installed v7.15 on my 64 bit anniversary upgrade Win 10 Pro.. DU meter works, which suggests no intrinsic incompatibility. Which version have you got installed?

3 more replies
Answer Match 60.48%

I have HP ENVY x360 - 15-u483cl which worked perfectly for 7 months, till i got a windows 10 anniversary update. It caused my computer to give BSOD with "system service exception igdkmd64.sys" error after every 2 days. I have latest version of the driver (Intel High-Definition Graphics Driver, 20.19.15.4360 Rev.B). I tried every possible solution available on internet to solve the problem but in vain. Finally i had to disable the intel driver and put the notebook on Microsoft?s generic driver which ended the BSOD. Now i have to live with poor graphics. Probably the only solution is if HP launches a newer version of driver that doesn?t conflict with windows 10 anniversary update. Or is there any other solution?

More replies
Answer Match 60.48%

I have been attempting to upgrade windows 10 pro, from version 10240 to version 1607 (anniversary update). I have tried both the Windows 10 Upgrade Assistant and the media creation tool (ISO). I get to 96% and, boom, every time it resets and restores my system to where it was before the upgrade started. The error I get is as follows:

0x8007042B - 0x4001E
The installation failed in the SECOND_BOOT phase with an error during PRE_OOBE operation.

I have searched for an answer and haven't found one. I have tried to trouble shoot it as best I can by unplugging everything but my keyboard/mouse, updated chipset, etc.. MS techs haven't been much help. Any thoughts? The iso is not on the OS drive, not sure if that matter. I would rather not have to nuke the system. I hate having to reinstall programs (adobe is the worst). Any help is appreciated.

Thanks.

More replies
Answer Match 60.48%

i keep getting these two error codes every time i try to update these programs through windows update: Update for Windows 7 (KB974332) Update for Windows 7 (KB974431) Update for Windows 7 (KB976098) Ive tried to download these updates from the download centre with out any success. please help me to fix this problem im using is windows 7 ultimate 32 bit

A:error Code 800F081F and Code 8024200D with window 7 update

Hello,Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend you temporarily disable or uninstall them and then try accessing Windows Update later. If the problem still happens, try the following steps:Rename the Windows Update Softwaredistribution folder================================================1. Close all the open windows. 2. Click "Start", click "All programs", and click "Accessories". 3. Right-click "Command Prompt", and click "Run as administrator".4. In the "Administrator: Command Prompt" window, type in "net stop WuAuServ" (without the quotes) and press Enter.
Note: Please look at the cmd window and make sure it says that it was successfully stopped before we try to rename the folder. However, if it fails, please let me know before performing any further steps and include any error messages you may have received when it failed.
5. Click "Start", in the "Start Search" box, type in "%windir%" (without the quotes) and press Enter.6. In the opened folder, look for the folder named "SoftwareDistribution".7. Right-click on the folder, select "Rename" and type "SDold" (without the quotes) to rename this ... Read more

2 more replies
Answer Match 60.48%

Attachment 290231
i having problem with this windows update

here is zip for CBSAttachment 290230


thanks!!!

A:windows update error (code 9c48 and code 9c57)

You haven't run the CheckSUR tool.

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

6 more replies
Answer Match 60.06%

I've tried to do with Windows 10 Anniversary update on my Inspiron 2350, but each time I try, it tells me it can't proceed because of a video error.  I've gone to the 2350 page and I've done all the driver updates there were to install but that didn't fix the problem.  Does anyone have any idea what the problem is? 

More replies
Answer Match 58.8%

I am unable to install Windows updates as I get an error " Code 64C : windows update encountered an unknown error..
Same with Code 66A
Please help.
I am unable to also install Windows Live essentials
I am using Windows 7
Greg

More replies
Answer Match 57.54%

Here's another tricky one.
This important security update will not update. It is only 606Kb.
Microsoft says it is caused by a virus problem. I have Norton 360 installed. Norton say it is not a virus.
Microsoft say pay us $120 to fix it. I say I can't afford to pay that for something when I have no way of knowing exactly what the problem really is.
This has been going on since November 2014. All the other updates are installed immediately but not this one.

Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2968292)
Installation date: ‎9/‎04/‎2015 4:08 PM
Installation status: Failed
Error details: Code 800B0100
Update type: Important
A security issue has been identified in a Microsoft software product that could affect your system. You can help protect your system by installing this update from Microsoft. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article. After you install this update, you may have to restart your system.
More information:
MS14-057: Description of the security update for the .NET Framework 2.0 Service Pack 2 for Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2: October 14, 2014

Just noticed this more recent one failed to update -
Security Update for Windows Vista (KB2884256)
Installation date: ‎16/‎03/‎2015 5:43 PM
Installation status: Failed
Error details: ... Read more

A:Vista Important Update will not update. Error details: Code 800B0100

That error is not caused by a virus, it is caused by a file corruption
The readiness tool can correct the problem in many situations
What is the System Update Readiness Tool? - Windows Help

2 more replies
Answer Match 57.54%

Hi everybody

I get windows update error code 2 on installing Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Vista, Server 2008, Server 2008 R2 x64 (KB2978128)
I have also some other errors installing Internet Explorer 11.

I have used "sfc /scannow" command but it didn't find any integrity violations. the CBS log is attached.

I have also used SUR and the log file can be found attached to this post.

Any help is appreciated.

A:Windows update error code 2 on installing security update .NETF 4.52

Not as bad as I thought from the file size of the CheckSUR log...


Code:
Summary:
Seconds executed: 626
Found 40 errors
CSI Manifest All Zeros Total count: 40
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-ie-ieshims_31bf3856ad364e35_10.2.9200.20916_none_ae6c710c2475d6dd.manifest
winsxs\manifests\amd64_microsoft-windows-ie-ieshims_31bf3856ad364e35_10.2.9200.16798_none_c5578c400ab73d40.manifest
winsxs\manifests\amd64_microsoft-windows-scripting-jscript9_31bf3856ad364e35_10.2.9200.20916_none_ab08cdc647ee4ac0.manifest
winsxs\manifests\amd64_microsoft-windows-ie-extcompat_31bf3856ad364e35_10.2.9200.20916_none_a38eed1960d6da24.manifest
winsxs\manifests\amd64_microsoft-windows-i..ersandsecurityzones_31bf3856ad364e35_10.2.9200.16798_none_32ad7426474825c0.manifest
winsxs\manifests\amd64_microsoft-windows-ie-ratings_31bf3856ad364e35_10.2.9200.16798_none_455c9a9ecd397534.manifest
winsxs\manifests\amd64_microsoft-windows-ieinstal_31bf3856ad364e35_10.2.9200.16798_none_66663569022097ee.manifest
winsxs\manifests\amd64_microsoft-windows-ie-extcompat_31bf3856ad364e35_10.2.9200.16798_none_ba7a084d47184087.manifest
winsxs\manifests\amd64_microsoft-windows-js-debuggeride_31bf3856ad364e35_10.2.9200.16798_none_b8c293a66f3311dc.manifest
winsxs\manifests\amd64_microsoft-windows-ie-runtimeutilities_31bf3856ad364e35_10.2.9200.20916_none_ae82eb7016c1044d.manifest
winsxs\manifests\amd64_microsoft-windows-ie-lowreg_31bf3856ad364e35_10.2.9200.20916_none_0f2b73186e1... Read more

9 more replies
Answer Match 57.54%

Hello,

I recieve error C80003FA whenever I do a Windows Update run. It doesn't get past the stage of checking for updates.

I've tried several fixes including:
- Waiting 15 minutes and running Windows Update again.
- Letting Windows Update run on its own schedule.
- SFC /Scannow
- Renaming the Catroot2 Folder.
- Running 3 different Fixit tools.
- Clean windows install.

After each and every one of those fixes I've tried windows update and I still get error C80003FA.

SFC Scannow has previously said no errors, but the last run through it said there were unfixable errors. I've got the log, though for brevity's sake I will keep it until someone asks for it.

Any ideas?

Thanks.

A:Windows Update fails in Update Check. Error code C80003FA.

Clean windows install doesn't fix it? You must be blocked, maybe your firewall???

9 more replies
Answer Match 57.54%

Error(s) found:
"Code 80070663 windows updater encountered an known error" when I
tried to update microsoft .net framework 3.5 family update (kb959209) x86 for windows vista 32 bit.

What should I do? I have tried to install this update many times but still getting same error. Thanks in advance for help.

Bela

A:error code 80070663 when I tried to update microsoft .net framework 3.5 family update

bela2020:

You didn't say, so I'll ask, have you done the net3.5 Service Pack 1 update?

15 more replies
Answer Match 57.54%

I'm having no luck installing KB2977629 (Cumulative Security Update IE11). I repeatedly get the error 8007371B.

SURT installs with no errors. SFC /SCANNOW runs with no errors. I am uploading the requested screenshots and ZIP file.

Any help would be appreciated.

Thank you!!!!

PS- well, I WAS uploading. My screencaptures upload great, but my CBS.zip fails with "Server error 500".
My zip file is 9.6mb-- over the 8mb limit. What can I delete from the directory to get under the 8mb limit?


Attachment 333111
Attachment 333112

A:Update Error Code 80073712-Cumulative Security Update IE11, Win 7(64)

I've found a way to get the CBS zip uploaded. I divided it into 4 parts. All of the CBS folder's files are included. Sorry I didn't see this earlier.


Attachment 333122
Attachment 333123
Attachment 333124
Attachment 333121

1 more replies
Answer Match 57.12%

Hello,
First, excuse my english, I'm trying my best.

I get error C80003FA whenever I do a Windows Update run.

I did the Windows Update Posting instructions. When I did the SURT installation, it didn't finish and I had to reboot the PC. Then it work.

I've tried sfc /scannow several times before with different results: sometimes finished with no errors, sometimes finish with unfixable errors and sometimes didn't finish at all.

I uploaded the CBS.zip

Hope you can help me, thanks.

A:Windows Update doesn't update. Error code C80003FA

There are no errors in any of the posted logs
Please post the C:\WIndows\windowsupdate.log file.

Please also post the event logs...

Open Event Viewer
click on the Windows logs entry in the left pane to expand it.
Now click on the Application entry - wait while it loads.
Click on 'File' in the menu bar and select Save...

Save the file as Appevt.evtx

Repeat for the System log

then zip both, and upload them.

9 more replies
Answer Match 57.12%

My Windows Update has been failing to update for a while now and I can't seem to find the solution. Here's the run-down of what happens step by step:Launch an update scan for Windows Update
It scans for a few seconds then says:





Quote:
Install new Windows Update software

To check for updates, you must first install an update for Windows Update.



Once I click Install it begins to "Install and Update," but then immediately returns to "Checking for Updates."
The next box I see says:





Quote:
Windows could not search for new updates

An error occurred while checking
for new updates for your
computer.

Error(s) found:
Code 800F081F


This happens every time I've attempted to update. After looking up the error code, I found the main Windows site that gave me the following explaination:
If you receive Windows Update error 800F081F, it means that Windows Update or Microsoft Update cannot determine the cryptographic service provider, or a file Windows Update requires (named catalog store) is corrupted.

I've looked through multiple Windows forums and How-To's and have tried all the fixes I found. SURT, sfc/ scannow, the standalone download for WU, Windows Update Diagnostic, multiple malware scans, and Microsoft Fixit. Ultimately, I always get the same error code, (800F081F).

I should also say this problem has been here for a few months now, and it's becoming more worrisome as more time passes. The longer I... Read more

A:Windows Update fails to update, error code 800F081F

Hi Mookeylee & welcome to Sevenforums.

Please follow Windows Update Posting Instructions

We need to see the logs to determine the cause of the error.

Worst case scenario, and last resort, repair install windows 7. No big deal I just did 2 yesterday win7x64 Home Premium. Brink posted a great tutorial Repair Install.

3 more replies
Answer Match 56.7%

I didn't see any posts about this, so I hope I am not double posting.

After removing a drive load of viruses, I am still not able to update Windows Vista to Service Pack 1. I have even tried to create a new admin user account in hopes that this would work, but no go. I tried running sfc.exe / scannow from the CMD and it did report that it was unable to repair wextract.exe. Also, the file reportingevents.txt located in %system root%\windows\softwaredistribution\reportingevents.txt lists "Windows Update Client failed to detect with error 0x80070490".
Although, I think Windows Defender can update. I need to take a break.

Acer Extensa 4620-4605
Windows Vista 32-bit Home Premium

More replies
Answer Match 56.7%

After buying a new hard drive and reimaging thumb drive from Dell, I installed Windows 7 Ultimate on a Dell M6400 Precision Laptop. I have everything working except Windows Update will not Update. It has not updated once since the install. Windows Tech
support has not been able to resolve the issue, even with remote assistance. I get the Error Code 0x80070003 after running the Windows Update Diagnostic Tool. Does anyone know how to fix this?

More replies
Answer Match 56.7%

Been using Google and such for a couple months messing with it but cant get update to work. My girlfriend updated from Vista a while ago and I cant crack this! I have done all the differect things I could find from Microsoft to no avail. The fixit program finds something and says its fixed but still doesnt work.

Any ideas you all could give would be great! Thanks.

A:Update for Windows Update Error Code 800700B7

Hello bobo and welcome am no expert mate but take a look at this Windows update KB2532531 gets error code 800700B7 - Microsoft Community

9 more replies
Answer Match 56.28%

I did the SURT & the SFC scan and have attached the requested files. An additional note is that my system has been very slow with all browsers. Any help is very much appreciated.

A:Code 9c48 update won't install

This could be the source of your problems.

Code:
Unavailable repair files:
servicing\packages\Package_2_for_KB2761451~31bf3856ad364e35~amd64~~9.4.1.0.mum
servicing\packages\Package_2_for_KB2761451~31bf3856ad364e35~amd64~~9.4.1.0.cat
I'll post a fix for it in a bit.

9 more replies
Answer Match 55.86%

Trying to install Windows Vista Service Pack 1 (KB936330) , but whenever I try to install it, the error code 80070017 appears saying the update has failed. I have numerous times to install it and it still won't allow me to install the update.
 

A:Error Code 80070017 when trying to install updates after a clean install.

Have you allowed Windows Update to run automatically to get all the previous updates? it should follow on to install SP1 automatically without intervention.
 

1 more replies
Answer Match 55.86%

Hello all.
Running windows 10 pro 64 bit.
I've updated from Version 1511 to the anniversary update, 1607.
Or at least, I thought I did.
The update went well, no hiccups, no errors. Used windows update, let it downloaded and install and rebooted. Alas, system still shows OS Version 1511.
Used update again, same thing, rebooted, 1511.
Went to the windows site, downloaded the windows10upgrade9252.exe, ran it, same exact issue, rebooted, still showing version 1511.
Error logs show no issues. Disabled all external drives, turned off anti-virus, etc, repeated, rinsed, rebooted, still version 1511.
Only think I've not done is burned an ISO to DVD and updated from that.
Any clues as to what's going on?
Thanks!
Nelson Davis

A:windows 10 update from version 1511 to 1607 anniversary update - does not update

Can you check to see what OS version you have? Check in settings > system > OS build. It should show something like 14393.5 or 14393.10

5 more replies
Answer Match 55.86%

One of my updates won't install.

Update For Windows 8.1 Preview For x64-based Systems (KB2863312)

This is not just a problem with that one update, but apparently when there's an error with Windows Update it also blocks everything from updating in the Windows Store, which also means I'll never see the 8.1 update until this is fixed. I've tried everything I can find but I still get the error.

One thing I tried was SFC /scannow in Command Prompt It did find a problem that it couldn't fix

I think this is the part of the CBS log that it's referrring to:






2013-10-17 18:35:06, Info CSI 0000078d [SR] Verify complete
2013-10-17 18:35:06, Info CSI 0000078e [SR] Verifying 1 components
2013-10-17 18:35:06, Info CSI 0000078f [SR] Beginning Verify and Repair transaction
2013-10-17 18:35:06, Info CSI 00000790 [SR] Verify complete
2013-10-17 18:35:06, Info CSI 00000791 [SR] Repairing 3 components
2013-10-17 18:35:06, Info CSI 00000792 [SR] Beginning Verify and Repair transaction
2013-10-17 18:35:06, Info CSI 00000793 Hashes for file member \??\C:\WINDOWS\SysWOW64\lt-LT\comdlg32.dll.mui do not match actual file [l:32{16}]"comdlg32.dll.mui" :
Found: {l:32 b:z27lwxanwaA7gptM0r8hloK5hb5rPSdP516r/Bi5QaM=} Expected: {l:32 b:jxsUlxcBdWsXBTPt2MIobmhdeewkxGDvhXDG4KX3PQY=}
2013-10-17 18:35:06, Info CSI ... Read more

A:Can't install a WIndows update (code 80073712)

One thing I tried was SFC /scannow in Command Prompt It did find a problem that it couldn't fix



Try running the sfc /scannow again and if issues are found, follow immediately with this message to see if corrections are made:

Dism /Online /Cleanup-Image /RestoreHealth

Good luck.

6 more replies
Answer Match 55.44%

Has anyone else run into this problem while trying to install the Windows 10 Anniversary Upgrade? The updater gives me this message, saying "Uninstall this app now because it isn't compatible with Windows 10", but it provides no name for the app and provides no way to uninstall it:
So I tried running Microsoft's uninstall tool that allows you to force uninstall troublesome programs, and I found this app in it's uninstall list, called "Name not available":
However, I try to uninstall using this tool and that fails as well. Has anyone else run into this or know of a solution?

Thanks

More replies