Tech Problem Aggregator

Lenovo G580 do not booting

Q: Lenovo G580 do not booting

I had G580 with Win10 updated from Win8. After disk replace to Samsung EVO 850 computer do not boot. Only LCD was turn on and it has silver color (background light only). When I put on it stock disk everythink run ok, but I can not access bios. Then I was remove BIOS battery to check if it will possible to access BIOS. From that moment is G580 black-screen, does not boot with stock HDD, do not install WIN10 from recovery DVD, restore button does not work, battery remove and turning on for resset does not working.. Nothig. Laptop turn ON but screen is black. Never happend this before with any laptop. I google and try almost every hint.

More replies
Answer Match 70.14%

My g580 ran out of battery while using it, and now it gets stuck on the lenovo logo. I tried a different hard drive which changed nothing, I've tested both hard drives on a different computer and they both work. However when I boot the laptop with no harddrive it will get past the logo go to a screen saying something about an unplugged cable then reset and get stuck on a blank screen.   If I plug in my windows recovery usb drive( and no harddrive) the the machine will boot normally and go to the windows installation screen. So any ideas on why a working harddrive would stop the system from booting? Also I've tried the whole taking out the battery unplugging it holding down the power key and then plugging it back in thing, did nothing. 

More replies
Answer Match 64.68%

Can i put this "Ultrabay Graphics Card GT750M or GT755M" in my g580 lenovo?

A:Lenovo g580 question

Hi Shadowraze , 
 
Welcome to the Community Forums.
 
Ultrabay swappable drive bay in the ThinkPad range of laptop computers and some of IdeaPad Y Series laptops. Graphics cards would not be recognized by the BIOS unlike y410p/y510p . 
 
Regards
 
 

1 more replies
Answer Match 64.68%

HiI have Lenovo G580(59337073) with Celeron B820.is it possible to upgrade the CPU to Intel core i3(i5) 3rd generation(Ivy Bridge)? thx 

A:Lenovo G580 CPU upgrade

Hi
 
Welcome to the community.
 
Please find below the supported Processor of your system, you can use any one of them.
 
3rd generation Intel Core i5-3210M 2nd generation Intel Core i3-2370M Intel Celeron B820 (1.60GHz, 2MB) 
 
Regards,
Sameer



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 64.68%

Can i put this "Ultrabay Graphics Card GT750M or GT755M" in my g580 lenovo?

More replies
Answer Match 64.68%

I have a g580 with win 10 and ubuntu14. Problem started a day ago, i am unable to turn on the wifi in windows. The option is not even highlighted. Diagnostics told me that wireless connections are turned of so i tried FN +F5 but still no change . Drivers are uptodate. Everything is working fine on linux. Any solution.

More replies
Answer Match 64.68%

Hello, I have an Lenovo G580 Celeron Dual core 1,8 Ghz, 2Gb DDR3, the pocessor is B830 I think.My question is what kind of processor should I upgrade from i3 series or i5 series?I have a list with a lot of models with socket G2 but I'm not sure if all are suitable.This is the list: http://www.cpu-upgrade.com/CPUs/Intel/Mobile_Celeron_Dual-Core/B830.html Can anybody help me? Thanks,

More replies
Answer Match 64.68%

Hello guys, i just bought a lenovo g580, and i am not happy with the fps I am getting. I want to play Counter Strike Global offensive.I want to ask what parts can i change on my laptop so i can get a bit better fps?So my parts are: i7 2620m witch is dual core with 4 threads on 2.7 ghz turbo boostIt also has 1x2gb ram and 1x4gb ram.Video is GForce 630m and 1 tb hard drive.CPU Socket is 988B rPGAI know I can upgrade ram and get an SSD . But can I change the processor and the video card? And also is it worth getting anymore than the 6 gb of RAM.Thank you. 

More replies
Answer Match 64.68%
Answer Match 64.68%

Hello, ive bought G580 2 years ago, but now is this type little low-end, so i need upgrade RAM and CPU for better, but i dont know which can i put in, my parameters from AIDA64:CPU: http://imgur.com/a/d5qiNCPUID:http://imgur.com/a/6cKA2MOTHERBOARD:http://imgur.com/a/L8dQLBIOS:http://imgur.com/a/WcaPQ North Bridge:CHIPSET1:http://imgur.com/a/eubRPCHIPSET2:http://imgur.com/a/aiEsk South Bridge: CHIPSET:http://imgur.com/a/CewhQ SPD:http://imgur.com/a/WT8fP If you need more i will send, just write me what.

More replies
Answer Match 63.84%

Hi.I have a G580 laptop, and its gets my gray hair :-) The keyboard is working very strange, the number keys dont work 1-2-3-4-5-6-7-8-9-0, the numlock is not working eighter, i have to enable capslock the write smalle letters, i cant log into windows because my password is with numbers, i have tried to clean my laptop twice, every time it come up with a windows default account wich i don know the password for, i cant boot up in safe mode because i dont have the right paasword. As you can see i am pretty stocked her.. Please Help....

More replies
Answer Match 63.84%

Hey, I'm currently using a G580 Lenovo laptop.One day I played my laptop and supricely it just turned off, so I turned it on again and once I typed my password to access the PC it turned off again, so I got the battery out the PC and waited five minutes, after I got the battery back I pressed the power button and nothing happened, no lights, no noice, nothing, just not turning on. I tried to find my problem on the internet and I found a youtube video how to fix that: get your battery off with your charger, press the power button 1 minute, get back the charger into the pc and press the power button and ta-dam! It's working. Well no, I did everything and it didn't solve my problem. Any ideas?

More replies
Answer Match 63.84%

Recently bought a new Lenovo G580 to replace my old decrepit Toshiba. It worked fine for a couple of days, but suddenly started BSOD-ing as I began to use the laptop more and more.

I have noticed it is more susceptible to BSOD-ing when I am running Bit Torrent. Although it seems to wait until it strikes, luring me into a false sense of security and then crippling me.

I ran BlueScreenView, as I have seen many people mention it on various forums, including this one, and the such and it gave me these results. Sorry if this is not the accepted way of throwing out these results, but I am unsure what I am doing.

093012-22042-01.dmp
30/09/2012 13:57:08
DRIVER_IRQL_NOT_LESS_OR_EQUAL
0x000000d1
00000000`00000028
00000000`00000002
00000000`00000000
fffff880`019ad6fd
NETIO.SYS
NETIO.SYS+106fd
x64
ntoskrnl.exe+7f1c0 C:\Windows\Minidump\093012-22042-01.dmp
2 15
7601
280,808

I have put it on here in its entirety but I dont really know what this is either. Download Dump file.txt from Sendspace.com - send big files the easy way

Posted on Reddit as well, but I have yet to receive any help there. :( Laptop keeps BSOD-ing. Think it may be torrent related. : techsupport

Pretty brain dead computer wise, so sorry if this is unreadable/invokes facepalms all round.

Any advice or help would be very much appreciated as I have no idea what I am doing. If all else fails I suppose I can send it back.

Thanks in advance.

A:Lenovo G580 repeated BSOD-ing

Hello,

Take a look at the following link and perform the requested steps.

This will give us more information to help diagnose your issue.

http://www.techsupportforum.com/foru...ta-452654.html

4 more replies
Answer Match 63.84%

The error: Intel UNDI, PXE-2.1 (build 083)Copyright (C) 1997-2000 Intel Corporation For Atheros PCIE Ethernet Controller v2.1.0.9(08/12/11) Check cable connection..!PXE-M0F: Exiting Intel PXE ROM. Can anybody help me with this?

A:Lenovo G580 PXE-M0F: Exiting Intel PXE ROM.

Hi and welcome to the communityIf any removable disk such as flash pen drive is inserted, then please remove it. Then try the procedure below.If you are trying to boot from the hard disk, Then please press F12 at lenovo screen after pressing power on and select the hard disk as the temporary boot device. This is temporary. For permanent go to bios setup utility by pressing F2 or F1 and place hdd in the first place




Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

9 more replies
Answer Match 63.84%

Hi  Please tell me the maximum Size supported by Lenovo  G580 20150?. Thanks .

More replies
Answer Match 63.84%

Hello every one today i was working normaly with my laptop g580 and the laptop turned off like when you unpluging the charger. I try to turn it with the charger/battery/both without any luck. No sign or light work . I make some solution like hard resset, pressing the button for 30s .... without any luck. Any sugesstion to fixing it even opening the laptop?

More replies
Answer Match 63.84%

Hi I've lost my antivirus on my laptop, any suggestions on what should I do?

A:lost protection on my G580 Lenovo

What do you mean by "lost" exactly? Did your license expire?

10 more replies
Answer Match 63.84%

I purchased a new lenovo G580 laptop last month(i5 -3210m and Windows 7 x64 home premium) and have had around 6-8 crashes.Havent installed any new software except Skype. The crashes initially mentioned only 'damageguardx64.sys' of Lenovo. However I am unable to find any fix for it. Can you pls help.

A:New Lenovo G580 BSOD error

Welcome aboard.

► First of all, uninstall McAfee. That's bad.

Code:
fffff880`09dbd268 fffff880`0106c97cUnable to load image \SystemRoot\system32\drivers\mfehidk.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
mfehidk+0x6c97c
It is McAfee Host Intrusion Detection Link Driver. Use Microsoft Security Essentials - Free Antivirus for Windows.

► A lot of Lenovo Bloatware are there, causing problems.
Damage Guard: Causing some damages here

Code:
BugCheck 19, {22, 0, 0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\DamageGuardX64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for DamageGuardX64.sys
*** ERROR: Module load completed but symbols could not be loaded for DamageGuardX64.sys
Probably caused by : DamageGuardX64.sys ( DamageGuardX64+32b4a )

Followup: MachineOwner
Lenovo EE Boot Optimizer driver now:

Code:
fffff880`09dbd888 fffff880`0183d30fUnable to load image \SystemRoot\system32\drivers\fbfmon.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for fbfmon.sys
*** ERROR: Module load completed but symbols could not be loaded for fbfmon.sys
fbfmon+0x330f
Get rid of all those things. Follow the guide: http://www.sevenforums.com/tutorials/219576-clean-up-factory-bloatware.html

► Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. I... Read more

1 more replies
Answer Match 63.84%

Hi, A small amount of water was spilt over the keyboard. It was promptly soaked up and computer worked fine for two hours. Some of the keys are no longer working (space, b, n and arrows). The computer is working fine and external keyboard is fine.Any ideas of how to get them working again? They have been removed and all looks dry. Thanks

More replies
Answer Match 63.84%

 ?  ?  ? My Lenovo G580 says "Lenovo" and didnt want to startup. I had try really many tutorials, i ude this pc for my school and i really need it to works please help me guys???? 

More replies
Answer Match 63.84%

Hi
I have a Lenovo g580 with windows 7 home premium 64 bit, whenever it goes to sleep, in whatever way, I get a black screen telling me that windows did not shutdown successfully.

I have completed a system restore to factory settings and downloaded and installed all updates. I have also run all Lenovo diagnostics to no avail.

I have changed the settings in power options, the bios has no power option.

I would appreciate any help

Many thanks
 

A:Lenovo G580 Sleep Problem

6 more replies
Answer Match 63.84%

While charging my lenovo g580, for first couple of minutes it gets charged but after that it stars to toggle bw charging and not charging msg continuously.https://m.youtube.com/watch?v=MmYNPzxg0xoAbove link shows the problem

More replies
Answer Match 63.84%

I own a lenovo g580 20157 model laptop. I am facing issues like its heating up a lot while playing games.i started facing all this problems after i updated the bios to 62cn40ww. Now i face fps drops. the games i used to play on my laptop with old bios, now started lagging. I also can't find the old bios file on support page. kindly advice.

A:Lenovo G580 20157 Performance.

Hi Puneet,
 
Welcome to Lenovo Forums.
 
We are really sorry to hear about the issue you are facing.
 
Firstly, Check BIOS? Sometimes a BIOS has fan speed controls.
 
This is normal as the game is running and full GPU is utilized, if the temp increases more than normal.  I suggest you to use the Laptop by placing it on a flat surface for good ventilation.
 
Please go through the below link to understand about Safe Temperature range for CPU?
 

Click Here
Click Here

 
You can refer the below thread for BIOS downgrade
 
Click here
 
Hope this helps.
 
Regards,
Shashi Kumar
 
-------------------------------------------------------------------------------------------------------------------------------------------
Did someone help you today? Press the star on the left to thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

8 more replies
Answer Match 63.84%

Hi,
I would like to know if my laptop is compatible with Windows Vista SP1 x64.I tried to install it,but when i rebooted the first time,it gave me a blue screen.I can't even boot into Safe Mode,or Last Known Good Configuration.I know Vista SP1 is compatible with UEFI,right?

A:Lenovo G580 20150 compatibility

Do not worry about compatibility. You must meet the minimum requirements.
What is windows vista?
Scroll a bit down the page
Then click on Vista Premium
https://www.thomas-krenn.com/en/wiki...s_in_UEFI-mode

27 more replies
Answer Match 63.84%

HelloI have a Lenovo G580 laptop with windows 7.I used it for about 2 years and 1 month ago my laptop diesthe laptop does not work and does not have any sign of electric. it does not work with the AC adaptor or with the battery, so the issue was in the motherboard, i bought a new motherboard and replaced the old one with the new (used), then the laptop back to  life againbut the problem is the laptop does not function with the battery, when I plugging the AC adaptor the charging lamp Lighting up and when I run the windows the battery indicator show (92% in charge) for hours and when i unplug the ac adaptor computer shuts down instantly.Please advise .Thank you !

More replies
Answer Match 63.84%

Hello.

I have a Lenovo G580 with Windows 8. I have a weird problem with audio. If the default audio is set as internal speakers and I plug in my headphones the sound just keeps coming from the internal speakers. But if I set the headphones as default, I can switch between the speakers and headphones as I want and there is no problem if only I play music from my computer.

If I try to play something from my browser, however, the sound only comes from the internal speakers and connecting the headphones does nothing. Except (and this is where it gets weird) if I play something from my computer first using the headphones. Then I can play anything from the browser and hear it through the headphones as long as I don't plug them out. If I plug them out, the sound switches back to the internal speakers and trying to plug in the headphones again doesn't do anything. So I have to play something from my computer again with the headphones plugged in and then switch to my browser to again play everything through my headphones.

What's wrong with it? Any way to make it work as it should work?

A:Lenovo G580 audio problem

Hi lenny111, first question would be what make of audio chip and have you downloaded the latest 8.1 drivers?

10 more replies
Answer Match 63.84%

Hi
I have a Lenovo g580 with windows 7 home premium 64 bit, whenever it goes to sleep, in whatever way, I get a black screen telling me that windows did not shutdown successfully.
I have completed a system restore to factory settings and downloaded and installed all updates. I have also run all Lenovo diagnostics to no avail.
I have changed the settings in power options, the bios has no power option.
I would appreciate any help
Many thanks

More replies
Answer Match 63.84%

Hello I have problem with bios update i have Windows 10 Pro 64bit (Installed yesterday) and i cant update bios because TDK error 255, i try run program on W7 64bit, W8 64bit and W10 Pro 64bit, but program doesnt run properly, so do you have any tips ? I was trying to run in Diagnostic mode, Safe boot etc..., but nothing happens.Another solution is Flash bios, but i am not Proffesional in bios, so i am worrying about crash my laptop, if i do it wrong my laptop will doesnt run, so i if you have any good guide how to do it right please help me.Thank for comment. Picture of error: http://imgur.com/AMZcV85 Specs from CPU-Z:CPU: http://imgur.com/a/3O3unMainboard: http://imgur.com/a/0I4m8 

More replies
Answer Match 63.42%

hi, i just updated my windows 7 to windows 10. should i update my bios?i see no update for windows 10, the latest is only for windows 8.1.this is the current bios i am usingSMBIOSBIOSVersion5ECN39WW(V3.05)thanks

A:lenovo g580 20150 latest bios.

My rule of thumb with BIOS updates is "if it is not broke, do not try to fix it" because there is always an inherent risk that a BIOS update can fail, and if so, leave  the system bricked (dead) requirnig a new motherboard, and there does not appear to be anything in the latest updates readme.txt other than specific fixes for Windows 8.1... So I would hold off. Summary of changes
==================
General Information:
Fixed:
1. Modified small number keys (such as the key U, I, O) matrix for win8. Cheers, 

1 more replies
Answer Match 63.42%

Model: 20157/2689Lenovo G580Windows 7 and Ubuntu 14No wifi card detected in device manager and intel proset gives error driver not installed.?

More replies
Answer Match 63.42%

Hi Team, I just bought Lenovo G580 laptop on 26 April 2013. It worked for few days well, but yesternight it suddenly trip to white screen. I made on/off several times, in/out the batteries but the white screen remains same after turn on the laptop. When i turn it on the screen goes white and it reamins constant.... Anybody have idea what problem it relates too ? What to do ? Please help guyz ?












Solved!

Go to Solution.

A:Lenovo G580 screen goes white display

hi sameerjha28,
Welcome to Lenovo Forums!
 
?
You can try doing this:
-Turn off the computer.
-Unplug AC Adapter and remove the battery.
- Hold the Power button Down for at least 10-15 seconds, Then try reconnecting the AC adapter only and leave the battery out, turn it ON and see if it will make any difference.
- If it powered on Try it with the battery and check if it would still turn on properly.
?
If the above steps did not work Try an external monitor and check if it works there.
 
I would suggest Contact Lenovo Technical Support for service if the steps above did not help.
 
?
Hope this helps,




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Answer Match 63.42%

i have worked with this laptop for over two and half years without any difficulties but now for over 5 months, when it shuts down or restarts, it powers up the system with power lights on but shows black screen. when i try to open it, the hard disk is always hot but still nothing. when i remove the CMOS battery and put it back, it takes like 5 minutes and it displays. i dont i understand the sickness need your help thank you.

A:Lenovo G580 laptop powersup the system but does no...

You need a tech to assess it. Impossible to troubleshoot without doing tests and observing.Eg. Fan - starts up, continues after boot up runningPower adapter voltage etc or other power issues. Air flow and likely more.




T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Windows 7 Home Prem - 64bit w/8GBZ70-80 I7 - 5500U 16GB GB - 1TB HD Window 8.1 64bit FHD 17.3 inch Display, Nvidia G840 w/2GB memory

1 more replies
Answer Match 63.42%

Hello. Can someone help me please. My lenovo G580 laptop is stuck on the lenovo splash screen and I do not know how to fix it.

More replies
Answer Match 63.42%

Hello,Recently I have reinstalled Windows 10 updated from 8.1 (where everything was OK) to clean Windows 10 installation (changed HDD to SSD).Everything is fine, except one single issue - integrated camera is not working.- Camera indicator is always on (white LED is always turned on)- There are NO imaging devices in Device Manager- In Device Manager is one warning - Unknown USB Device (Device Descriptor Request Failed), Location: Port_#0006.Hub_#0005, with status with error code 43. Is there any way to solve this problem? If you need any additional info, I am here to provide Thank you in advance!

More replies
Answer Match 63.42%

Hi All,
I am facing problem please help me out. Actually I forgot my Administrator password and I was using my system using Guest Account. But unfortunately today when I turn on my laptop to try recover the password, display turned into Blank and I hardly can see folders, Icon etc. I tried some with my own but does work thats why I need some expert advise. I have tried the following but didn't work

1. Reboot the system.
2. Opened in safe mode.
3. remove the battery and adapter after some time reboot. etc.

My laptop's configuration is given below :
Lenovo G580,Ci5 3RD/4GB/500GB/Windows 7 ultimate 64 bit.

Please let me know If you required any specific information.

Thanks in Advance
Shubh

A:Lenovo G580/i5/4GB blank screen on bootup

For password see option 4 or 5 - User Account - Reset Password in Windows 7

Can you be more specific about how it turned blank? A photograph will help tremendously. Screenshots and Files - Upload and Post in Seven Forums

5 more replies
Answer Match 63.42%

Hi all,is there a way to order new original sticker for Lenovo G580 (like this one on picture)?I have new, very good G580 laptop (model 20150) and I am very satisfied. I replaced the CPU and put the new i7 3610QM in it, 8GB of RAM and SSD. The only thing that tore and which bothers me is sticker. xDIf anyone from Lenovo can help me with this, I would be grateful.  

A:Lenovo G580 - where to order original sticker?

Hi Wind,
 
Welcome to Lenovo Forums.
 
It really feels something amazing when people are concerned about stickers more than issue. I can honestly say that i haven't tried it. However if you asked me to guess I would suggest you to contact the nearest service center for futher assistance.
 
Hope this helps. Let us know how you get on.
 
Regards,
Shashi Kumar
 
------------------------------------------------------------------------------------------------------------------------------------------------------
Did someone help you today? Press the star on the left to thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

2 more replies
Answer Match 63.42%

i have worked with this laptop for over two and half years without any difficulties but now for over 5 months, when it shuts down or restarts, it powers up the system with power lights on but shows black screen. when i try to open it, the hard disk is always hot but still nothing. when i remove the CMOS battery and put it back, it takes like 5 minutes and it displays. i dont i understand the sickness need your help thank you.

A:Lenovo G580 laptop powersup the system but does no...

You need a tech to assess it. Impossible to troubleshoot without doing tests and observing.Eg. Fan - starts up, continues after boot up runningPower adapter voltage etc or other power issues. Air flow and likely more.




T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Windows 7 Home Prem - 64bit w/8GBZ70-80 I7 - 5500U 16GB GB - 1TB HD Window 8.1 64bit FHD 17.3 inch Display, Nvidia G840 w/2GB memory

4 more replies
Answer Match 63.42%

Hi,
My daughters laptop has me baffled. It started with a blank screen issue, which I solved with a system restore. (theres was nothing of importance on the hard drive) I did try taking the battery out and after replacing holding the start button for 30 seconds first.
All appeared fine untill I shut it down. There was a massive 186 windows updates to do, which was expected after rolling back so far...
The issue now is a I get this message on the screen "failure to configure updates, reverting changes. do not turn off you computer. I get stuck with this screen with no change, I even left it over night.
I haven't managed to find the safe boot option with this Win 8 machine, I tried the F8 key on start up but no joy.
Has anyone solved this problem before?
Thanks in advance
Marty

A:Lenovo G580 Win 8 laptop update issues

Did you revert back from windows 10?

1 more replies
Answer Match 63.42%

Hi there all, Recently I got a Lenovo G580 (2189).Because I need WiDi (wireless display) options I bought a Intel Centrino Advanced-N6230 wireless card. After installing this hardware an error showed up at the startup: error 1802 ... unauthorized etc etc. I did not know about Lenovo - Bios and whitelisting hardware. Anyway this simple question remains. Which Intel Wirelesscard can I use with this laptop in order to work properly.Cause I don't want to hack the bios Cheers,Marlon

A:Lenovo G580 replacing wirelesscard not succesful -...

Hello and welcome,
 
I'm more familiar with ThinkPads, so please double-check anything you read in this post...
 
The problem with the white list is that a wireless card has to have a Lenovo FRU number.  It isn't sufficient to be an Intel XYZ board, it has to be an XYZ with the firmware ( the PCI subsystem ID) modified for Lenovo.  Reputable vendors will list the FRU if the board will play nice with the white list.
 
Take a look at the hardware maintenance manual for the G580, page 102l.  It lists an Intel 6150NX with an FRU # of 20002543.
 
Lenovo G480, G485, G580, G585, G780 Hardware Maintenance Manual (English)
 
As I said, this isn't my field of expertise (if there is one...) but maybe this will at least get you started.
 
Z.
 
 

9 more replies
Answer Match 63.42%

Just started happening this week.   It's stuck at the boot screen "lenovo".   I tried many different methods like removing battery, holding power button to reset, etc.  The *only* way to get it to boot is the remove memory card, and put it back.  Then it will boot up fine.     It might then boot fine for the rest of the day.  But then the next day (or after being shutdown for a while), it happens again so i have to remove memory card, put it back, etc.  What could be the problem here ?  I tried both memory slots.  So i don't think it's particular to one slot.  

More replies
Answer Match 63.42%

Hi all, I've run into an issue with my laptop  Lenovo G580 that has Windows 10 Enterprise 64. I am not able to read CDs and DVDs. When a DVD is inserted, "Choose what to do with removal devices" comes up. When I click that, the error message "E:\ is invalid drive" shows up. Please help. Thanks and regards,John

More replies
Answer Match 63.42%

Hello, The Problem:Recently I installed Ubuntu 14.04.1 LTS  to my HDD in UEFI mode. Soon I found out that I could not access the BIOS using F2, but F12 allowed selection of boot device. Reinstalling Windows, I found out that the boot menu still had the Ubuntu entry and I still could not access the BIOS. I searched on the web for a solution and before I could manage to find a proper one, I managed to delete both the ubuntu and windows boot manager boot entries, still locked out of bios. This time I could not boot into any OS, could not access bios using f2 nor access boot menu using f12.  The Solution:There was one last hope, during boot I noticed that PXE (Boot via ethernet option was still showing).Note: This solution requires you to update the BIOS. This is a very risky procedure, so proceed with caution. This will also probably void your warranty. If you can access boot menu (F12) and want to regain access to the BIOS (F2), boot into Windows 7. Install a bios update for your laptop (specifically for your laptop) available at The Lenovo Support Site. The oldest BIOS (probably for Windows 7) is preffered. If you donot have access to windows 7, perform step 2 and boot into the created ISO by creating a bootable CD or pendrive. Then goto step 11.If you can't access F12 and F2, cannot boot into OS, but can boot via Ethernet (there should be a message about trying Atheros Ethernet PXE Boot during startup), start from step 1. Perform the following steps on a s... Read more

A:Lenovo G580 cannot access BIOS after installing Ub...

Update: Even in the newest BIOS Update 62cn97ww (for Lenovo G580), Ubuntu causes the same problem. I came across a solution on the internet, that works without having to update the BIOS if Ubuntu can be accessed. To fix it, boot into Ubuntu (should be installed on the system), start Terminal and type in the following commands:sudo grub-install
sudo efibootmgr -b 0 -BReboot and F2 should work. BIOS should be accessible through F12>Tab>Setup also. Ubuntu will boot no more but can probably be fixed.

8 more replies
Answer Match 62.58%

Im not native english speaker, sry if u cant understand some parts. Ill try my best to make my message clear so eventual will come easier.

This problem occurs for quite some time, its rather calm since few weeks when I downloaded shitload of new drivers and some other lenovo stuff but might be just coincedence. Since this issue doesnt want to go away itself I have to do something about it. I can send it to Lenovo for free service anymore so Id like to ask some experts if theres something I can do to fix this issue.

Some info:
- occurs usually while typing or other stuff, but few times my laptop literally went nuts and flashed black screens few times a sec, no matter if i touched it or not

- its not overheating, i bought cooling pad and it didnt help much

- can happen just after turning laptop on and not happen during 10h+ session

Thank you in advance.

A:Screen randomly flashing black on Lenovo G580

Work through these Troubleshooting Steps for Windows 7 which will uncover most problems. Report back results as there may be other steps indicated.

Why did you install all of these other drivers? Did you already have performance problems or just create them?

Do you have a System Restore point still available before this problem began?

What else have you installed? Please post back as screenshot of Control Panel's Programs and Features after maximizing the page, using the Snipping Tool from Start Menu: Screenshots and Files - Upload and Post in Seven Forums - Windows 7 Forums

3 more replies
Answer Match 62.58%

Please assist as I did the following steps to access the BIOS, it hangs:1. Shut down the computer2. Press the "Recovery Button" NOT THE POWER BUTTON (A small round button with curve arrow sign which is located on the left side of the Power Button just next to the dust removal opening on the left side of the laptop)3. Selected the BIOS Setup and nothing happens. I cannot even choose the boot option. If I put a pendrive with ubuntu, It picks it up, but not the Windows pendrive.My original HDD has bad sectors and cannot clone it. Any Ideas on how to help me?

More replies
Answer Match 62.58%

hello
my problem is very confusing
every time i plug in a usb for android device it says it's not recognized by windows however the mobile or the tablet are charging via the USB but i cannot access the memory card
i tried installing intel USB driver , ADB driver but still no response
i use windows 8.1 last update was 3 days ago

A:android devices aren't recognized by my lenovo G580

Originally Posted by Zaref


hello
my problem is very confusing
every time i plug in a usb for android device it says it's not recognized by windows however the mobile or the tablet are charging via the USB but i cannot access the memory card
i tried installing intel USB driver , ADB driver but still no response
i use windows 8.1 last update was 3 days ago



Try Wondershare MobileGo free trial. After it installs the proper device drivers you should be good to go and under no obligation to buy.

[OFFICIAL] Wondershare MobileGo for Android: Android Manager

2 more replies
Answer Match 62.58%

Hello All,
 
My Lenovo Laptop, Lenovo G580 Model 2189, was upgraded from Windows 8.1 to Windows 10. Up until then I had been using Lenovo Solutions Center (LSC) and the Backup utility within it.
 
Now post the upgrade the Backup option has disappeared from the LSC. I am running LSC Version 2.8. 
 
I upgraded to LSC 3.x after reading somewhere that I should do this if I have upgradred to Windows 10. Then the only option I got was the periodic hardware scan for problems. So I downgraded again to LSC 2.8.
 
Will LSC Backup work under Windows 10 ?
Is there a Windows 10 version of LSC I can download that does have the backup option ?
 
Thanks All
John.
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.
 

A:G580 - LSC Lenovo Solutions Center - Missing Backu...

Yes I have upgraded to LSC 3.3.002 and File Backup Utility has disappeared.

1 more replies
Answer Match 62.58%

I bought my Lenovo G580 more than 3 years ago, and it came with Windows 8.
For a certain reason, my coworker installed on it windows 7.
I tried to restore it to the original image by using the Novo OneKey Rescue button next to the power button... but unfortunately it didn't work... when i press the Novo button, four (4) choices appear on the screen:
- Normal Setup
- BIOS Setup
- Boot Menu
- System Recovery
When i press "System Recovery", windows 7 starts normally without recovering anything...
Is there any way to restore my Laptop to the original factory software???
Thank you in advance...
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 
 

























images.jpg ?12 KB

A:G580 - Lenovo OneKey Rescue button is not working ...

Your One Key Recovery (OKR) button is working, but most likely the recovery partition that contained the necessary files was removed or destroyed during the install of Windows 7.You have a couple of options:1. Contact Lenovo Support by phone, ask if the recovery DVD's are still available and purchase them, it is a reasonable price...2. Purchase the retail DVD of Windows (7, 8.1 or 10) and perform a fresh install.3. Pick a Linux version you like - download and burn to DVD, then install from media.I personally use Windows 10 Pro and Linux Mint (Dual Boot) on my G580 with no hardware issues in either OS... Really like some of the applications that Linux has, and the fact that it is completely free to use.Good luck.CB

3 more replies
Answer Match 62.58%

Hi,   I had upgraded my Lenovo G580 to windows 10. Everything working fine except dolby audio and touchpad scroll. Volume is too low when it is 100 and also touch pad scroll is not working. In previous version i have problem in wifi now it is working fine in windows 10. Kindly update the audio and touchpad drivers for windows 10 or give any suggestion to fix this problems.

A:Lenovo G580 windows 10 dolby driver and touch pad ...

Dear kathir26,
 
Thank You For Contacting Lenovo.
 
Kindly be informed that the Windows 10 Drivers For your machine model G580 arent released yet so you can follow up on our Website to find the driver needed once they are available.
 
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g580-no...
 
 



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 62.58%

I noticed that new drivers were released for G580. The drivers (Lenovo Enegry Management Driver) canot install because when the installer starts up, it immediatelly closes. Do I have an issue somewhere? Windows 10 (1511, Build 10568.17)Lenovo G580 (20157)

A:Lenovo G580 Windows 10 ACPI Driver not installing?

hi acemod13,
 
I looked at the Lenovo Energy Management driver for Windows 10 and upon observing the installer behavior, it extract the ACPI driver files (58KB) to C:\ProgramData\Lenovo\ACPIDriver (this may explain why the installer closes right after extracting).
 
If you're seing an Unknown Device in the Device Manager with an ACPI hardware ID (see image below) then try to update the driver manually and point it to the C:\ProgramData\Lenovo\ACPIDriver folder
 - Sample image
 
If you're unable to see the driver files, I've uploaded them here.
 
 
Let me know how it goes.
 
Regards

2 more replies
Answer Match 62.58%

Hi

I got a new Lenovo G580 laptop which did not come with any pre-installed OS. I installed Ubuntu in UEFI mode (I had not disabled UEFI/Secure Boot). Later I installed Windows 7. During installation it asked me to format the entire format as it did not recognize the GPT partition. Accordingly without thinking twice I erased the entire HDD and installed Windows 7. Now I am unable to enter into BIOS

Things I have tried:
Tried with F2, F1 and Delete keys while booting
Tried removing the battery and booting while pressing the above keys individually
Tried removing the battery and adapter, held the power button for 1 minute
Tried removing the battery and held the power button for 1 minute while the adapter was plugged in
Tried pressing F12 and going to the APP MENU but I can only see "Diagnostic Splash" Nothing else and in that diagnostic splash screen I see that the System BIOS is "shadowed"
How can i gain access to BIOS so I can disable UEFI and install Win 7 and Ubuntu side by side
 

More replies
Answer Match 62.16%

I bought laptop 4 years before and it was good experience no maintannce cost or no issue till the date, but suddenly it stopped working. When I took the laptop to near by service centre they dismantled and tested the components and they are asked me to change a new mother board , really I could not understand what is the problem. How much will be costed , if I take my laptop to near by lenovo service centre ? May I know the maximum consuling charge , and I am just expecting everything should be fixed in front of me ?( place : India, chennai, sholinganallur ) 

More replies
Answer Match 62.16%

Hey All,
I have a LENOVO G580 2689 Laptop. It has:

Intel Core i3 2.40GHz (i3-3110M)
DDR3 (4GB)
No hard drive
Windows 8 sticker.
I would like to install a 1TG Hard drive. Which hard drive is compatiable with this laptop? Also it has a Windows 8 sticker underneath the laptop but the Windows 8 serial key is not present. Where can I find the licence key for this machine? Are they stored in the BIOS/motherboard?
 
Thank you in advance! :-)

A:Which hard drive to install on a LENOVO G580 2689 Laptop?

Try this for the HDD: http://www.amazon.com/Laptop-Hard-Drive-Lenovo-G580/dp/B00M4OGZQI. As for the windows 8 serial key, I don't know. My lenovo Y410p doesn't have the serial key on it, but I had no problems installing windows 8.1.

3 more replies
Answer Match 62.16%

My Lenovo g580 webcam is not opening as in device manager its showing yellow Exclamation on driver which says that: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)Please help as i had many things but its not helping.Do suggest.

More replies
Answer Match 62.16%

Hi, I have lenovo G580 20157 laptop with windows 8 pro, i found a bios update 62cn97ww on support site but when i restarted my laptop and run the 62cn97ww update it just hangs and does not respond. kept ideal for long time to restart but no response. Any help on this?

A:Lenovo G580 20157 bios 62cn97ww update problem

hi adarsh_savant,
 
I think you may have concern in this thread,
http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/G580-Bios-update-problem/m-p/1199186/highlight...
 
Here the suggested solution from neokenchi that helped.
 
1. Boot into the BIOS by repeatedly tapping F2 on startup
 
2. In the BIOS, navigate to the Boot Tab and set UEFI to Disabled or Legacy then press F10 to save and exit. When
the computer reboots, check if you still get the errors and/or if you're able to boot into Windows.
 
3. If same problem, leave the changes that you made on Step 2 and attempt to re-install Windows via a Windows 8 recovery drive or OneKey Recovery button (note that this will wipe the computer to factory settings)
 
Hope this helps,
Cheers!



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 56.28%

Hello. I have a Lenovo G580 Notebook with Windows 10 installed. The issue is that the Windows hotkeys, that is Windows key and other letter combinations, aren't working. For example, normally, if I press Windows key + I, then the Settings app should open up or if I press Windows key + R, then Run should open up. But the Start screen opens up instead in all such cases.

This is happening since I have updated the Synaptics touchpad driver via Windows Update. If I uninstall the driver, then the hotkeys start working again. But as soon as I install the driver, they stop working. This was not happening with Windows 10 before, even when the Synaptics driver was installed. It has suddenly started happening couple of months ago. Also I cannot completely uninstall the Synaptics driver because my laptop came with it itself nor can I stop the driver from updating as it is an important driver and it needs to be updated to be compatible with Windows 10.

Any suggestions? Thanks in advance.

A:Windows hotkeys not working on Lenovo G580 Notebook (Windows 10).

If you PM me your email address I will send you a link to the Synaptics driver that works for me. Then you will have to use the HideUpdate hotfix to keep Windows update from changing it.

0 more replies
Answer Match 56.28%

this is what it looks like! please help me I am in trouble. I tried looking at other people's questions about this but none of the answers seem to help me and it always redirects me back to this same screen.please tell me what to do!
 

A:Lenovo g580 opens at boot menu/app menu screen help!!

and it won't let me exit either!
 

3 more replies
Answer Match 48.72%

Hi there'This is the first time this has ever happened since owning my laptop.i have pressed the novo button on the side'it then brings up the NOVO BUTTON MENU ( with options )Normal StartupBIOS SetupBoot MenuSystem Recovery Please help' which one do I choose and what do I do once I select that option!Thanks!  

A:Lenovo g50 not booting

I have since tried system recovery and it came back with a msg that system recovery failed.

2 more replies
Answer Match 48.72%

My dad purched me a Lenovo G50 for my graduation gift. Im pretty sure my warenty has expired and i need help.  So i was on today for a few hours, i shut it down like i normally would with the shut down button. I try to get back on a few hours later to try and check my emails. It dosnt work and cant start up my Windows 10. Now ive tried doing start up settings restart to get it to do save mode. It dosnt let me it juat goes back into "automatic repair" i dont know what else to do and wanting to throw it out. I need serious help. Like soon

More replies
Answer Match 48.72%

My Lenovo Laptop recently has stopped working.It turns on and everything, it just cannot boot up.The loading screen pops up and everything, but it won't go to the login screen.When I power the laptop on, it goes on the loading screen, and stays like that for a good 5-8 minutes, then gets an error message that says"Process1_Initialization_Failed"Then it tries to go into System Recovery, but after "Loading Files" it goes into the loading screen, then transitions into a black screen. There are no options, just a black screen.I wait for an hour, and absolutely nothing happens.I made sure nothing else is plugged in except for the Charger.The laptop is a Lenovo Y51.If you need anymore information, please ask. I really need this fixed soon.

A:Lenovo Y51 not booting

Hi Braniel64 , 
 
Welcome to the Community Forums. 
 
We are hoping that you have a recovery media to run repair if needed else using a rescue image to boot from so that you can try this process directed in this video. Similarly you may find suggested steps here . 
 
What version of Windows do you have (Win 7 / Win 8.1/ Win10) ?
Any data that you have not backed up yet ?
 
As you have described for a probable windows boot process issue , factory reset would offer as last option if the above repair steps fails. 
 
Update us how it goes .
 
Regards

1 more replies
Answer Match 48.3%

My Computer data:Lenovo G50- 45Win 8 already being installedMy problem:Hey dudes,I wanted to start my PC as always but instead of starting my GUI, windows just showed me the message that "Automatically reperation is being prepared". I used to wait but after hours the computer stayed the same. I decided to use the "onekey recovery" but instead of recovering, the computer just showed me the lenovo sign and used to load. The same procedure, I used to wait hours, but nothing changed. After that I prepared an USB device and set win 10 (64) on it and wanted to let him boot from my device. After having a lot of problems, I found a page on the internet telling me to change to "legacy" mode and to disable secure boot. Well, done that and enter with "Fn and F12" the boot menu. Selected my USB device and he is really showing me a Win 10 logo. But, and thats my problem he isnt doing anything else. He is just showing me a loading circle with a big blue Win 10 logo. I dont know what I should do next. Any Ideas around here? I've heard that a Hardware issue could be possible, isn't it? While booting, I pushed different Keys and heard one single, loud Beeping. Any ideas what I could do guys?Would be really glad to hear from you  - Greetings

More replies
Answer Match 48.3%

So, I have a Lenovo Thinkpad Z61T 9660CTO which I bought in 2007. It has served me well. Yesterday, it was working perfectly, albeit with some exxtra high heating at the bottom, close to 60-70 degrees Celcius. Then , I wanted to put in a new SSD into it. So, I took out the old HDD and then connected it, and the other SSD via USB casing to another computer running a disk cloning software. Tried it did not work. Now, I put back the old HDD into the Thinkpad, it does not start up again at all. Even the first screen which says "Thinkpad" press Blue button for recovery" does not come up now. Hard drive is not it, since the screen does not switch on at ALL. If it was HDD failure, it would say something like HDD not detected. But in this case, it does not even show the initial Thinkpad screen. So, this may be a loose connection somewhere (even though I did not remove the casing at all while removing the HDD) Both times, I removed and reattached the HDD, with the power cable removed from the Thinkpad, but, the battery was still inside the chassis. Short circuit? Bad! Someone help.

A:Lenovo Z61T not booting

In case its not clear, when I press the power button, I do not arrive at the press Del to enter BIOS screen at all. No THINKPAD screen. Just black screen and no HDD activity

3 more replies
Answer Match 48.3%

My Computer data:Lenovo G50- 45Win 8 already being installedMy problem:Hey dudes,I wanted to start my PC as always but instead of starting my GUI, windows just showed me the message that "Automatically reperation is being prepared". I used to wait but after hours the computer stayed the same. I decided to use the "onekey recovery" but instead of recovering, the computer just showed me the lenovo sign and used to load. The same procedure, I used to wait hours, but nothing changed. After that I prepared an USB device and set win 10 (64) on it and wanted to let him boot from my device. After having a lot of problems, I found a page on the internet telling me to change to "legacy" mode and to disable secure boot. Well, done that and enter with "Fn and F12" the boot menu. Selected my USB device and he is really showing me a Win 10 logo. But, and thats my problem he isnt doing anything else. He is just showing me a loading circle with a big blue Win 10 logo. I dont know what I should do next. Any Ideas around here? I've heard that a Hardware issue could be possible, isn't it? While booting, I pushed different Keys and heard one single, loud Beeping. Any ideas what I could do guys?Would be really glad to hear from you  - Greetings

More replies
Answer Match 48.3%

Hidy ho all,

I have a Lenovo G505s I bought in august. Up to this point, its been a great machine. This morning (11/20/2014) I installed some updates from windows update. around 4:30 PM today, I rebooted the machine, because I had an hour break in between classes. During that reboot it tried to install those updates, and it said it failed. After the failure it said it was reverting back to the prior state before the updates were installed.

It then rebooted again. It got to the Lenovo splash screen, and some little white text on the bottom of the screen has said for the past half hour "Updating your system (5%)" with the windows 8 little circle thing spinning around just above it.

I did try restarting it by holding down the power button, but it came right back to this screen.

Google has turned up nothing yet. Has anyone else had this issue? If so, have they (you) been able to fix it?
 

A:Lenovo G505s not booting

I think the quickest way around this issue is to let the OS try to install the updates it might take a while to do so(which is a pain) but I would wait because you don't want to mess up your system you might loose more than the time you will wait
 

3 more replies
Answer Match 47.46%

I turned my Lenovo laptop on Friday to see the usual splash Lenovo on start up and then nothing else happened it kept continually doing that and going no further. Just so you know my laptop has no warranty left as I got it last Christmas second hand. I have been looking at demonstration videos on you tube and what I have tried so far is. I plugged in an external usb keyboard and got into bios and checked it was detecting my hard drive and it was. The next step I did was disconnect internal power/ battery and did the hold of the power button for 30 seconds to 1 minute  with the power cord connected only. And it was still doing the same. I then got advised to remove the cmos battery turn on laptop and then back off and put the battery back in. This has also failed to work so now I am looking for help here as I don't know what to do next and am hoping someone here has a different suggestion for me to try and hopefully get my laptop back up and running. Thank you in advance for any help given.

More replies
Answer Match 47.46%

I cleaned the keyboard and packed the laptop, since then it's not booting. What are the possible reasons
 

A:Lenovo G450 laptop not booting

You need to give us a lot more details. What did you clean it with, when how.

and what do you mean "Packed up" the laptop.
 

1 more replies
Answer Match 47.46%

Hi i have a Lenovo g50 that I purchased last year. It was working perfectly fine until today. As always, I turned on my laptop and waited for it to load. I went to get something and when I came back, it was still on the booting screen and the loading circle thing was still turning. I have Windows 10 running on this laptop. I restarted my laptop and the booting  screen came up again but it said Preparing Automatic Repair. I even tried to fix my bios thing as well but it didn't help. PLEASE HELP 

More replies
Answer Match 47.46%

Hi, I bought my laptop with windows 7 pro , later i requested for windows 10 pro recovery and lenovo sent to me a 16GB USB recovery drive containing windows 10 pro version. Problem i am facing it i can not boot my laptop from this USB. As i checked there are window 10 pro files in USB but i can not see an iso image in the USB , and when i go to my system bios option make usb as first bootable device then boot the system it do not recognize that a bootable usb exits or boots from it. Kindly supportSnapshot of files in USB is attached

























snapshot.JPG ?80 KB

A:Lenovo X1 Carbon 3rd gen not booting from the Wind...

Boot into the BIOS.  Hit F9 to reset defaults.  Then, under startup, change to UEFI only.  Reboot.  Hit enter when you see tha splash screen, then F12.  Boot foom USB.

1 more replies
Answer Match 47.46%

Yesterday night 10 o Clock I have worked. then I close the my laptop again I open the same Laptop today morning 9 o clock it is showing blank screen what I do please help me thanks lot.
 

A:lenovo R61 LAPTOP not booting O/S WINXP

Do a system recovery or restore with the discs that came with PC make
And of course you had all your personal files backed up right?
if not pull the drive out and put it in another PC get them and then do the recovery.
 

1 more replies
Answer Match 47.46%

I have a new laptop T60 from Lenovo.. When I boot the XP CD it blooads fine.. When I choose etither Repair or Install the OS, I got a message that there is no disks found in the computer...

I have being used fine and I am just trying to install a new XP in a new Primary partition cretaed with PQ/MAGIC..

Any suggestion? any changes on the BIOS?

Reginaldo
 

A:Booting the CD... Do not recognize Lenovo T60 HD drive?

rbarosa said:

I have a new laptop T60 from Lenovo.. When I boot the XP CD it blooads fine.. When I choose etither Repair or Install the OS, I got a message that there is no disks found in the computer...

I have being used fine and I am just trying to install a new XP in a new Primary partition cretaed with PQ/MAGIC..

Any suggestion? any changes on the BIOS?

Reginaldo Click to expand...

I solved the issue....
The S-ATA hard disk must be placed in “compatibility mode” using a BIOS function before
SuSE can be installed or used.

Otherwise the XP disk boor does not recognize the HD..
Reginaldo
 

1 more replies
Answer Match 47.46%

when i turn on the system it wont load,it just stays on 'lenovo screen' and it will start loadingwhen alt+ctrl+del is pressed then only it will boot 1. Scan for virus, etc.-------No virus found2. Run in command prompt with admin rights "sfc scannow". Do not include the quotation mark.----windows resource protection did not find any integrity violations.  

More replies
Answer Match 47.46%

Hello, I am running windows 8 on a lenovo yoga 2 pro, and suddenly, it won't boot. The power light will turn on, and the capslock and backlight work, but the screen doesn't work. It doesn't even show the Lenovo boot screen
 

A:Lenovo yoga 2 pro windows 8 not booting

Try and boot with charger plugged in. If this works try installing the latest updates you may have restart and install more than once so be patient. If this doesn't work check with your device maker.
 

1 more replies
Answer Match 47.04%

Hey guys, windows 7 unit which the owner says he suspects has virus but he also told me that his company checked for viruses but did not locate any, I ran a few virus scans but those did not produce anything. Symptoms are when I boot, it sometimes goes to windows but takes a long time and just doesn't get to the desktop, it is hanging after the logon screen. In safe mode it goes to desktop in normal time and laptop functions as normal, any ideas why it works as normal only in safe mode but can't reach the desktop in normal mode please?.

A:Lenovo B570 laptop booting problem

Some program or startup is causing the slowdown. You can do a clean boot and from there add services until you find the one causing the problem. It would be a good idea to disable your startup items also.

13 more replies
Answer Match 47.04%

i installed windows 8.1 using pendrive after shuting down that laptop is not starting. During boot it is not showing anything.Nothing is happening even after i press f2 or f10 or f12.my laptop is lenovo g570 please help me.

A:lenovo g570 not booting after installing windows 8.1

Hello sagarap and welcome to the forum! How did you create the pendrive, from an ISO and where from? Any errors during installation? What OS was on it before? After install did you make sure the BIOS was set to boot from the hard drive?

Some more info would help.

5 more replies
Answer Match 47.04%

Good morning everybody,

I have bought my laptop 1 year ago and everything was going ok, i installed many programs (Adobe illustrator) and games (PES2011) and many others and i faced no problems.
One day, my cousin used the laptop to watch a new movie but he forgot to charge the battery during that time until the laptop shuts down alone due to empty battery.
On the next day, i tried to power on my laptop it starts normally until it reached the Windows 7 logo it automatically shuts down. I tried again for several times with the same result then a blue screen with white writings on it was displayed on the screen (harddisk failure).
I bought a new Toshiba 500GB HDD and burned a new Windows 7 Ultimate x64 DVD to install a fresh new copy of it but i have faced the following:
1- when I power on the laptop it works normally.
2- I press F12 to choose the device to boot from (Boot from DVD)
3- It starts normally and a windows 7 screen appears with a loading bar. It is filled quickly in the first time then a new screen appears with a loading bar starts to fill but after around 75% of the loading bar is filled the laptop shuts down.
I tried to restart it for several times with the same result.

I make the following points to try to restart the laptop but always with the same result:
1- Remove the new HDD and then insert it
2- Remove the Rams and then insert them
3- Remove the battery and then insert it.

Laptop Description
Lenovo IdeaPad Y560:
Intel Core I3
4GB Ram
ATI Mobility Radeon ... Read more

A:Booting problem with my Lenovo Ideapad Y560

Hello Hasan and welcome to Seven Forums.

Please forgive me but I'm a little confused. You say:






Quote:
I bought a new Toshiba 500GB HDD and burned a new Windows 7 Ultimate x64 DVD to install a fresh new copy of it but i have faced the following:
1- when I power on the laptop it works normally.
2- I press F12 to choose the device to boot from (Boot from DVD)
3- It starts normally and a windows 7 screen appears with a loading bar. It is filled quickly in the first time then a new screen appears with a loading bar starts to fill but after around 75% of the loading bar is filled the laptop shuts down.
I tried to restart it for several times with the same result.


- Are you replacing the original laptop hard drive with the new Toshiba or is the Toshiba an external USB hard drive?
- Are you trying to clean install Windows 7 Ultimate x64 to the original laptop hard drive or to the new Toshiba?
- Where did you get the ISO file for Windows 7 Ultimate?

9 more replies
Answer Match 47.04%

i installed windows 8.1 using pendrive after shuting down that laptop is not starting. During boot it is not showing anything.Nothing is happening even after i press f2 or f10 or f12.my laptop is lenovo g570 please help me.

A:lenovo g570 not booting after installing windows 8.1

There is a separate Windows 8 forum. Since this is a Windows 8 issue, best to post there.

Windows 8 Forums

1 more replies
Answer Match 47.04%

My laptop Lenovo T430 is not turning on, when I press the power button only the the keyboard lit turns on and then everything is off, only the green light around the power button is on. I've searched and found tried to do the next steps but it didn't work :/ - shut down the computer.- disconnect the electricity- remove the battery- press the start button 20 secondsafter that,- connect the battery and the electricity and turn on the computer. PLease try to help me as this is very urgent for me please.Many Thanks for any kind assistance

A:Lenovo T430 Screen Won't Turn On and not booting u...

Hi,
 
Welcome to Lenovo Community Forums!
 
I?m sorry to hear that your Lenovo ThinkPad T430 is not powering on.
Check if it's something to do with your AC adapter or battery. Insufficient power might cause some of those issues as well. Take the battery out and try to power on your laptop with the charger only. Make sure your laptop power jack and charger plug tip are securely connected. Try starting the laptop using good known AC adapter and battery.
 
Try connecting the device to an external monitor and check if it displays properly.
 
Please do let me know the happenings!
 
Best regards,
Mithun.



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 47.04%

Hello,

Im new here. So yesterday instead shutting down my laptop what I did is sleep mode it. When I got home I tried turning on it but it didn't so I plugged my charger but my laptop didn't light up (showing that the charger is plugged in the laptop). Please help?

Thanks in advance

A:Lenovo ideapad z410 w8.1 not booting up after sleep

this is happening to me too.
Currently I disable bluetooth device,then renable it and it works till next time computer sleeps.
Last update did something to bluetooth.

3 more replies
Answer Match 47.04%

lenovo 480, windows 8, 2gb mem, 500 gb hdd.. when i power the laptop the boot menu always apppear, so i chose to boot on the hard drive but it will not continue to boot to the hard drive at will return to boot menu... so i check the hard drive by using hirem... and nothing error found....

More replies
Answer Match 47.04%

Hello, please help me. Seems to have problem with Lenovo H420 bios uefi/legacy.Bought a new video card RX 480, PSU is 580 W and it is enough, tested on other system, card is working.Rx480 has bios switch but nothing happens, not booting. I read from other similar issues to change uefi/legacy settings, but in bios this Lenovo has no option.To upgrade bios Lenovo has no upgrade. What else can i do? Thanks for help.

More replies
Answer Match 47.04%

Yesterday I had this issue with my Lenovo R400 and I alredy solved but i want to post the solution on this forum for other people.  The ProblemMy laptop entered in hibernation mode and in the morning that i tried to turn it on it didnt. I pushed the power button i see the lights of 1 and A turned on and off twice, but didnt show the boot screen.. The screen was blank doing nothing. Solution 1Disconnect the power cable and battery and push the power button 11 times and in the 11th push the button for 30 seconds. Connect power and push power button. Then you can connect the battery. Solution 2 (The one that helped me)Removed the power cable, the battery and the internal battery of CMOS and let it disconnected all for 15 hours. I dont now the exact time that it have to be disconected but i read a post saying 15, maybe with few hours if enought.  Then you connect the cable and push F1 (until beeps)  and turn on the Laptop to enter in Supervisor Mode to set date and time F10 and exit. Connect the CMOS's battery and normal battery and is all. WARNINGIf you reset the CMOS and the laptop have a Supervisor Password enabled and you dont have it  you will be in big problems. Mine laptop didnt have it. I was luck because i didnt know it. Without the Supervisor password you cant set the date/time and the laptop wont boot again. You will need to change the MotherBoard. Or maybe you can find another solution but wont be easy. So be carefull about... Read more

More replies
Answer Match 47.04%

Hi all I have recently bought a Lenovo M91p thinkcenter Desktop as an upgrade to my old i3 PC. Old Spec is as follows:Coolermaster Thunder 600W power supplyIntel DH55HC motherboardi3 CPURadeon HIS HD 7950 Graphics card8GB RAM500GB HDDI have transferred my old 500GB HD and Power supply to the new Lenovo desktop and everything booted fine.Then I installed 2x 2GB extra into the Lenovo M91p (Making it 8GB), and upgraded the 500GB HDD to a 1TB. So my new spec is as follows:Coolermaster Thunder 600W power supplyLenovo Q67 motherboardi7 2600 3.4 Ghz CPU8GB RAM1TB and 500GB HDDEverything Booted fine. Then I tried to install my old Graphics card (The Radeon HIS HD 7950 Graphics card). All i got was a blank screen, no beeps, no BIOS... Nothing.At first, i thought my power supply wasn't enough... So i tested a 750W power supply in the pc. Still nothing.Then I thought the motherboards BIOS was outdated... Updated it... Still nothing. I even tried updating the firmware of the graphics card. Nothing.The graphics card definitely works because I tested it in my old machine and it worked 100%.However, I took my graphics card to my supplier, and he tested it on another one of his PCs... Didn't work there either.My PC's BIOS doesn't have support for secure boot, in case anyone wants to know.I have run out of ideas now... Any one able to help? 

A:Lenovo M91p Desktop not booting with new graphics ...

There's a white list of graphics cards the BIOS will recognize. The HD 7950 is a 180w card, well in excess of what the factory power supply can provide for (and the case/fans sufficient cooling for), and is not one that Lenovo would provide BIOS support for.
 
Use the search engine above to see what cards other owners have successfully used in their M91p.

2 more replies
Answer Match 47.04%

I don't know which OS in on this unit, if it's 8 or 10 but when I power on the only screen I am seeing is the Boot Menu screen with 2 options showing exactly as below:
 
1; Windows Boot Manager
2. eMMC Card0: Sandisk iNAND 64gb
 
Any option I choose between those two then ENTER brings it back to that same screen, pressing ESC does the same thing. I tried F111 and F12 at power on to see if there is a recovery or reset option but only that boot screen shows up, help please?

A:Lenovo ideapad 100s-141BR not booting

It's ok, the HDD is shot

1 more replies
Answer Match 47.04%

I'm attempting to boot to a Win7 DVD, but in BIOS I'm unable to set the boot priority to any type of optical drive. The BIOS boot devices menu is the same. I know I can use the USB tool, but that also didn't work. Is there any Lenovo BIOS patch I can apply, or an alternate solution to be able to boot to the optical drive?











Solved!
Go to Solution.

A:Booting up from the optical drive on a Lenovo H430

Hi, On the Lenovo H505s you have to change a few options in the BIOS to install Windows 7 which requires booting from the optical drive. It's probably the same in the H430 Restart the computer at the white Lenovo (BIOS) screen, hit F1 to enter the BIOSGo to Security tabGo to Secure BootDisable Secure BootReset to setup modehit Yes to "Do you really wish to reset platform to setup mode?" Change the boot options to look for USB devices if you are installing from a flash drive, or make the DVD drive the first boot device. (Select SATA dev 1 not the DVD drive or whatever it's called and hit the - key) Go to the EXIT tabDisable OS Optimized DefaultsSave and Exit. That's now I did it on the H505s, not to sure what impact that has on the OEM installation of Win 8, probably destroys it, so be aware you might not be able to go back after. -Cheers

4 more replies
Answer Match 46.62%

Hi everyone, I've had a Lenovo Y510P with SLI 750m's for about 1 year and 3 months now. 2 weeks ago (around the time I upgraded to Windows 10). My laptop suddenly is unable to boot for the most part.When I press power, it hangs on the initial blank screen, with no logo pop-up. I have managed to get it to boot before, just simply by restarting over and over, but it's been 3 days and no luck now. It simply stays on a blank screen (no backlight), though the keyboard and power button light up. Here are the steps I've taken to troubleshoot:-> Removed battery, unplugged AC, performed "fleeting power removal" by holding the power button for 60 secs (have done this multiple times)-> Removed RAM, changed slots etc. When there is no RAM, the machine will continuously reboot-> Removed HDD, reseated-> Removed 2nd GPU. When the 2nd GPU is plugged in, the fan will try and spin every so often-> Unplugged connectors to wi-fi module-> Restarted many times-> Pressed the NOVO button, it simply brings it to the blank screen Any advice would be much appreciated. The laptop itself is in good condition, and has little physical ware. Unfortunately it's no longer under warranty, and I'm sure the cost of sending it in is quite high. 

A:Lenovo Y510P not booting, blank screen on startup

If you boot without the HDD, what happens?

5 more replies
Answer Match 46.62%

I Just brought a brand new Lenovo G570 laptop and was browsing the internet using wireless usb stick from a provider and my battery drained out and when I connected my power cord back up, the Laptop re booted and since then I am having an issue. The PC beeps a booting and asks for a OS selection highlighting windows 7 as the OS and waits for me to select it.

How can I fix this issue. I tried startup recovery using finction f8 and that did not help.

A:Lenovo G570 beeps when booting and waits for OS selection

hi and welcome to the forums please have a read of brinks tutorial How to Run a Startup Repair in Windows 7






Quote:
Startup Repair is a Windows 7 system recovery tool that can fix certain problems, such as missing or damaged system files (ex: MBR boot file), that might prevent Windows from starting correctly. This will show you how to run Startup Repair to allow it to scan your Windows 7 computer for a startup problem and try to fix it so your computer can start correctly.

3 more replies
Answer Match 46.62%

Hello,today we updated new BIOS 9SKT94AUS to ThinkCentre M92p, previous state with Win7, we needed do upgrade to Win10.Now after BIOS update is device not booting, only thing we can do is access BIOS setting or choose boot device thru F12 or F1.We did:F9 (reset to default), CMOS reset (1-2/2-3 pin) - no change, UEFI/LEGACY - no changeLINUX (no change), Installation media (USB/DVD of W7, W8, W10, network boot) - no changeAfter choosing boot device directly we get when USB e.g. flash is inserted Lenovo logo hanging,when CD/DVD inserted underscore hanging.Anyone any ideas?Thanks,Tomas

More replies
Answer Match 46.62%

Lenovo z500. Windows 10. When I turn on screen is black. Nothing showing. No cursor or flickering. Can hear computer Tring to boot and keyboard lights come on. Have tried pressing all function keys to no avail. I'm away for a conference and have no tools to open up and remove battery. This happened yesterday but then when I randomly moved screen it came on, but problem reoccurring when I tried to boot up again. No amount of screen moving helping this time.  Has never happened before.  I had to put it through air port scanners yesterday during travel. Has never affected laptop before but I did read somewhere about a magnetic field perhaps affecting it but not sure what that means. Any help greatly appreciated as without it my presentation at this conference is screwed! Thanks! Tim

More replies
Answer Match 46.62%

Hi,I'm trying to boot and install windows 7 on my lenovo touchpad running windows 8 at the moment. I'm booting from an external dvd drive because the thinkpad doesn't have an internal drive. It will start the boot process and load the windows files, then throw an "Your PC ran into a problem and needs to restart. We're just collecting some error info, and thne you can restart (0% complete) PAGE FAULT IN NONPAGED AREA (WimFsf.sys)" error.I've tried booting from a USB drive as well and get the same results. I need to load windows 7 on 5 machines and only one has worked fine. I'm assuming it's a memory issue, but I haven't seen this error before when booting. Any tips?message edited by robkule422

A:PAGE FAULT when booting windows 7 (Lenovo laptop)

If you're getting that above error message, that's a blue screen error, which means you're booting to Windows and not to the DVD drive. What do you have selected as the boot order?

2 more replies
Answer Match 46.2%

I am not able to update my VGA driver with any other than ATI Mobility Radeon HD 5730. However when I boot having this driver keeps my screen blank till I have to reboot it in Safe Mode and choose Standard VGA driver.
I have attached my MiniDump folder with this thread.

What shall I do?

Note: I have downloaded latest drivers from Lenovo site. Used ATI Catalyst, AMD updates etc. but nothing resolved my issue.

A:Lenovo Ideapad Y560 shows blank screen after booting

I have the same issue - can anyone shed light on this?

1 more replies
Answer Match 45.78%

I am having an issue with our Lenovo Thinkpad Yoga's connecting to our MDT 2012 server.  When I boot to Windows PE and try to connect to the deployment share I receive the message, "no networking devices found on this machine!."  I was able to find a link to MDT drivers on the Lenovo site https://support.lenovo.com/us/en/documents/ht074984.  I have imported this driver into MDT and created a selection profile. I have ensured that the driver is in the boot image.  I have also tried injecting the drivers manually while booted into PE.  Just for good measure I even tried the drivers for the Think Pro One Link Dock and for the USB to ethernet dongle.  I have researched the web for solutions on this issue and tried all that I have found thus far. Oh by the way I have even totally recreated the MDT server from scratch and I still have this issue with the Yoga. I have other models of Lenovo computers and I can connect to the MDT server in PE on these machines.  Any advice or assistance would be highly appreciated as I am under the gun to get this up and working.

More replies