Tech Problem Aggregator

Fresh Install, All New Hardware, Persistant BSOD on install

Q: Fresh Install, All New Hardware, Persistant BSOD on install

Note: I will get an export with DM Log Collector this evening when I get home from work but I wanted to start collecting some opinions on the subject and I do have a BlueScreenView export to hand.


I was experiencing a BSOD during Windows 10 Pro x64 installation on a freshly built computer, the installation would get to 80% ? 100% and BSOD with a variety of errors, mostly IRQL_NOT_LESS_OR_EQUAL

After about 10 attempts with different UEFI settings disabled (Intel NIC, XMP Disabled, Updated UEFI, etc) the install stuck and I was able to load into windows thought this was pure chance.
In its current state the OS boots up fine and I can log in but I have about 1 ? 2 minutes before I get a BSOD, the like of which are attached in a TXT file from BlueScreenView (I will get the proper DM Log Collector files this evening)


I have tried:

Checking CPU temperature (32 Degrees C)Updating MB UEFIDisabling and disconnecting NICs as I found several threads on google identifying Intel NIC drivers as a possible causeReseating all hardware and power cablesRemoving each stick of RAM in turnInstalling from UEFI and LegacyDifferent media (VL image, Media Creation Tool Image)Installing from USB3 & USB2 PortsWith and without XMPInstalling Chipset drivers in the ~1 minute I have in the OSUninstalling video drivers in the ~1 minute I have in the OS as I remember hearing about significant issues with Windows 10 and nVidia DriversInstalling latest nVidia Drivers in the ~1 minute I have in the OSUninstalling the Intel NIC Drivers in the ~1 minute I have in the OSRemoving DISK2 (WD Red 2TB)

And I have now reached the point where I am running out of troubleshooting options, I do not have any spare components to trial and error with except a spare GTX 660 & on-board graphics and another power supply.

I have a few things I plan to try next from reading the forums
Disable all but 1 core to highlight a CPU fault if any
Manually set DRAM configuration instead of relying on XPM
Install a different operating system to help identify if hardware or driver related

My System Specs are as follows:


Motherboard: Asus SABERTOOTH Z170 MARK 1CPU: Intel Core i5 6600K, S 1151 (Stock Speeds)GFX: EVGA GeForce GTX 1070 SC GAMING ACX 3.0RAM: 32GB (2x16GB) Corsair DDR4 Vengeance LPX Black, PC4-24000 (3000), Non-ECC Unbuffered, CAS 15-17-17-35, XMP 2.0, 1.35V (CMK32GX4M2B3000C15) I have just learned that this memory is not listed in the Qualified Vendors List for my Motherboard, an oversight on my part at the time of purchase, perhaps the cause? (http://dlcdnet.asus.com/pub/ASUS/mb/...270.1471941926)PSU: 650W Corsair RM650x SeriesOS Windows 10 Pro x64 1607DISK: 500GB Samsung 850 EVO, 2.5" SSD, SATA IIIDISK2: (WD Red 2TB)



Any help with this would be much appreciated!

More replies
Answer Match 108.78%

Hi there,
I have been getting frequent BSOD's on my 18 month old Dell XPS 17 L701x laptop, so I completely wiped the hard drive and reinstalled windows 7 on it. However the BSOD still persists. The error message given states, 'STOP Error 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL'. I am running Windows 7 home premium 64bit OEM. I will attach the dump files to this post.
Thanks, Snakehips.

Attachment 216227

A:Persistant BSOD even after HDD reformat and fresh windows install

Hi Snakehips. Your attachment is invalid. Please follow the http://www.sevenforums.com/crashes-d...tructions.html

Thanks.

3 more replies
Answer Match 97.02%

Several months ago I put windows 10 on my custom desktop and really enjoyed it. As of a few weeks ago, I started getting random bluescreens. They became more and more frequent with wildly ranging error codes. Unable to pin down a particular cause, I wrote it off as random issues with windows 10. With the latest build, build 10130 my computer has been a nightmare. I've seen every bsod under the sun: WHEA uncorrectable error, IRQL not less or equal, critical process died, driver manager io violation, unexpected kernel mode trap, kernel security check failure, and I decided enough was enough.
I reset the bios to default settings (disabled overclock), I reseated all power connections, cleaned out all the dust, and wiped my boot drives.
With a fresh install of windows 8.1 all seemed to be going well.
Until just 8 hours after fresh install, I'm watching a movie with my wife and bam.
WHEA UNCORRECTABLE ERROR
Just had a second one while typing this. Today is not a good day.
Computer build mostly in 2012:
Asus z77 Sabertooth (BIOS 2104 latest)
Intel i7 3770k + Corsair h110i
Seasonic SS-750KM3 (750 watt)
2x 120GB OCZ Vertex 3 in RAID0
4x G.SKILL Ripjaw X 8gb 1600 DDR3
EVGA GTX 780 Classified (Currently in default bios, no OC)


sfc /scannow, no integrity violations
chkdsk, no bad sectors
CrystalDiskInfo reports both drives in good health
Memory Diagnostic test - no errors


I'll probably pull the graphics card tonight, but it seems to be either pointing to my power s... Read more

A:Fresh install of Windows 8.1 - BSOD - Likely hardware

Got a new bsod That I had never seen before today. PAGE_FAULT_IN_NONPAGED_AREA (win32k.sys)

Might remove 2 sticks of RAM just to see if that helps things.

DESKTOP8-Sat_06_27_2015_103414_94.zip

3 more replies
Answer Match 96.18%

Hi everyone,

My mom's pc, that I've build, is having serious issues. The frequence of BSOD's was almost one every hours...
So I've decided first to format and install Win 7 x64 ultimate, then I installed the up to date drivers (Lan, sound, chipset, gpu, webcam...) some were installed via the windows update manager. I've installed the USB 3.0 driver recommended on the Asus website, which is a Nec usb 3.0 controller... . BSOD's were still happening so I've decided to check the Ram, using memtest, I did 4 passes with no errors. Then I tested the CPU and GPU (the integrated one, as I've noticed that without the GPU on the PCI-E slot, BSOD's were less frequent) using OCCT for one hour on both with no errors... In the end I've uninstalled the USB 3.0 driver, as apparently it was also causing BSOD's.

I don't know how to check the other hardware such as : disks, the power supply (I changed it recently), and the motherboard itself. I am now wondering whether it is an hardware or software issue, that's why I'm posting here.
Before I attach the SF diagnostif folder, here are the specs of my pc:

CPU: AMD Phenom II X4 955 Black Edition (no o/c)
GPU: integrated: AMD HD4250, and the one on the PCI-E a HD5850
MB: Asus M4A88TD-V EVO/USB3
RAM: G.Skill Ripjaws 2*2GB 1600Mhz
Hard drives : main : WD Caviar Black 500GB secondary : Seagate Barracuda 7200.11 500GB
Power supply : Antec HCG 520W

If you could help me, I would appreciate it, thanks!

A:Frequent BSOD even with fresh install and hardware check...

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80002ad193c, fffff8800a8e6020, 0}
*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
Probably caused by : klif.sys ( klif+1cd1f )
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002ad193c, Address of the instruction which caused the bugcheck
Arg3: fffff8800a8e6020, Address of the context record for the exception that caused the bugcheck
... Read more

9 more replies
Answer Match 94.08%

Getting a BSOD on a DELL XPS13 (L321X) after fresh install of Windows. I just replaced the MB with a new MB. DELL diagnostics show everything is okay.

Windows 7 - Home Premium - 64 Bit
Intel I7 - 2637M @ 1.7
4 GB onboard memory
120 GB SSD

A:BSOD - Fresh install of Windows - DELL Diagnostics show hardware is ok

Welcome to SF ccwtech .

Usually I would like to have more than one dump file so manually check the minidump folder.

Code:
C:\Windows\minidump
If dump files are present in that folder copy them to the Desktop, zip and upload in your next post.

As for the dump files uploaded;
The bug check is 0x9F which is DRIVER POWER STATE FAILURE that happens in
transitions between power states most commonly S0 (ON state) > S3 (Sleep state)
or vice-versa. You can read more HERE.

The most common cause is a device driver but sometimes it's the hardware itself
that is at fault.


Code:
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8004090060, Physical Device Object of the stack
Arg3: fffff80000b9c3d8, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa8009df5260, The blocked IRP

Code:
!irp fffffa8009df5260
>[ 16, 2] 0 0 fffffa8006e2e050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\NETwNs64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NETwNs64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETwNs64.sys
\Driver\NETwNs64


Code:
lmvm NETwNs64
start end module name
fffff880`05c15000 fffff880`0649b000 NETwNs64 T (no symbols)... Read more

4 more replies
Answer Match 86.1%

I just added a new SSD drive and installed a fresh copy of Win 7 Enterprise. I have had a previous driver issue with this system in the past. The amazing people on this site helped me work it out. Now for the life I just can't seem to sort it out again myself this time.

I ran and uploaded the SF_Diagnostic info in zip file format.

Thank you for any help that can be given.

A:BSOD playing Guild Wars 2, recent SSD install and fresh install of W7

Hello and welcome to Sevenforums.

BSOD ANALYSE


Code:
1: kd> k
Child-SP RetAddr Call Site
fffff880`02f1ffc8 fffff800`02d5c83b nt!KeBugCheckEx
fffff880`02f1ffd0 fffff800`02d271e4 nt!KipFatalFilter+0x1b
fffff880`02f20010 fffff800`02cff3ac nt! ?? ::FNODOBFM::`string'+0x83d
fffff880`02f20050 fffff800`02cfee2d nt!_C_specific_handler+0x8c
fffff880`02f200c0 fffff800`02cfdc05 nt!RtlpExecuteHandlerForException+0xd
fffff880`02f200f0 fffff800`02d0eb81 nt!RtlDispatchException+0x415
fffff880`02f207d0 fffff800`02cd3842 nt!KiDispatchException+0x135
fffff880`02f20e70 00000000`00000000 nt!KiExceptionDispatch+0xc2
Realtek wanted to do a task but it was executed for some reason. Do you have Realtek installed?

Best Regards,
Frederik.

3 more replies
Answer Match 86.1%

My system info is in my profile, installing Windows 7 x64 Ultimate Retail. Attached is all of the report info.

I have no idea what is going on. Whenever I try to install all of the Windows updates it blue screens. Then it will reboot, try to apply the updates, and blue screen again. I've run Linux Server 12.04 on this machine just fine, so I'm fairly certain it's not a hardware issue. Also, this build is brand new (built it a few weeks ago)

Thanks for your time!

Things I've Tried:
- Reinstalling Windows 7 x64 Ultimate
- GPU, CPU, and RAM stress tests (all showed no signs of error)
- Unplugging extraneous HD's
- sfc.exe /scannow (no errors)

EDIT:
The main error code seems to be 0x101
Just got a new one that is 0xFC

SOLUTION EDIT:
I disabled core unlocking and everything is magically working. I suspect I had a faulty core unlocked. Still doesn't explain the stress tests passing, but whatever.

A:BSOD on fresh install when install updates, misc error codes

This one DMP was related to the following.

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg

3 more replies
Answer Match 84.84%

Hello from a first timer here.

I'm using HP pavilion DV7-1195nr, 4gig, 9600m gt 1gig. I had Vista 64bit Prem. that ran just fine, and I did the Win 7 Prem. upgrade. It seems to run smooth until I started getting bsod. I decided to do a full install of Win 7 Prem from my upgrade disc. I booted to the cd, formatted my drive partitions, it created a 100mb partition.
I did the double install way to make the activation work.
Ok, the first install I did not update the firmware. and got all kind of bsod etc problems. Main culprit then was the wifi card driver.
I flashed my bios, got all my updated drivers for everything and did another fresh install which is where I'm today. I might not have installed my chip set driver first is only one point I want to point out.
So, I only have MS Security Essentials installed simply because I thought I had this thing whiped. Went to shut down and it will not shut down and will hit a BSOD and reboot. It continues to do this for some reason. It will reboot in safe mode. I also noticed if I remove a driver and try to update it, the system seems to just hang now?
One other note. I realized last night weather or not this is a issue, that I have my NAS running WD Myworldbook that I continuously connect to via WiFi.

I'm attaching my mini dumps and the other two errors that I saw in hopes for some kind of help, cause I'm at a loss now. I have seen what they have to say to a point, but I can not for the life of me fix this issue. I really... Read more

A:BSOD crashes after fresh install of 7 64bit install

Maybe I should also mention, that I either pulled the drivers from there Hardware sites and if I did not, then I used Hp site. So, I have the latest intel chipset from intel, latest intel wifi from intel and latest nvidia drivers from nvidia website.

There are only like 4 or 5 things starting up. Few of them are nvida driver stuff, MS essientials, touchpad software & can't remember the other two.

This may be another issue, but I have noticed every since I have put Win7 on, while it boots, I get a pop in my speakers??

5 more replies
Answer Match 84.84%

On older version of windows, whenever you upgraded hardware, it was always best/mandatory to do a fresh install of windows. Is this still the case for 7? I really dont want to reinstall windows (mainly because of all the gigs i would have to download because I deleted the install files that are on my windows drive), but I dont wanna gimp my performance because something didnt get detected.

A:new hardware, fresh install?

Its not mandatory .... just make sure that you have updated your new hardware to the latest drivers...

1 more replies
Answer Match 84.84%

I have just completed building a new system for a friend.
My friend is purchasing a new windows 7 pro package shortly.

In the meantime I would like to get her new machine up and running.

Can I install Win 7 with my copy but not enter a key thus allowing her
to enter her own OEM key once she receives the new computer?

I would like to at least get the updates installed for her and configure
the new machine prior to her receiving it so that she only has to put in
her key to activate windows and everything else will be ready to use.

A:New Hardware Fresh Install

Receives the new computer? or the new installation disk? Installation without entering a key is always possible while going for updates is a different matter there.

With any fresh install of 7 you first have to pass the WGA validation as well as the installation of the Windows installer used to put the updates on once downloaded. That requires an activated Windows however leaving you in a dilemna. Once the new disk is in perform the clean install at that time and get ready for the load of updates once that is activated.

For simply running 7 for 120 days without activationm, http://www.sevenforums.com/tutorials...-120-days.html

9 more replies
Answer Match 81.9%

For some reason my boot drive is incredibly slow to boot and log on.  It's an SSD, and the CPU and Motherboard are new.  All the correct drivers are installed.  The event viewer is flooded with errors, but I have no idea how to interpret them

A:Fresh install of windows, slow boot, new hardware

Please use the following link to provide us with information about your computer so that we can assist you.How to Publish a Snapshot using Speccy Please download MiniToolBox  , save it to your desktop and run it. Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size. Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post.

13 more replies
Answer Match 81.9%

I just installed a fresh copy of windows 8.1 on my Asus N53S laptop that comes stock with Windows 7 and now my keyboard shortcuts for volume do not work. Above the F1-F4 keys i have three buttons to mute, increase and decrease the volume which do not work. The keyboard shortcut's for muting, decreasing and increasing volume do not work either (Fn+F10-F12) but the shortcut for decreasing brightness and turning the screen off works (Fn+F5-F7) If there is any way to get this working again, I'd appreciate the help. Having to use the windows volume slider is a bit of a pain.

A:Hardware Buttons not working with fresh install of Windows

Did you download the chipset drivers for the laptop?

2 more replies
Answer Match 81.9%

So, I'm pulling out my hair.

I kept getting a TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" error

I tried all suggestions I could find, Driver(s), VBScripts, and everything else and the most that happened was that Windows stopped logging those errors, but the system never stopped to hang.

I thought it might be a hardware issue, so I ran scans, and everything passed, even a bios level scan of hardware; and Windows ran fine in Safe mode so that made me think it was a software issue.

I reformatted + installed a different edition of Windows that work gave me (I had Win 7 pro x64, and got Enterprise x64 from work)... everything was fine for 48 hours and my computer JUST locked up again...

Any ideas at all? Im desperate!

Here is the full error log:





Quote:
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.



I'm not sure if relevant but, my specs are:
HP a6403w
4GB of Ram
Core2Duo E8400
Windows 7 Enterprise x64 (w/ SP1)
Radeon HD 6450

A:0x80041003 Error(s) (Tried fresh install + hardware scans)

attaching the file dump...

9 more replies
Answer Match 81.48%

Hi. I have installed a whole new windows 7 pro x64. My new mobo an ASus p5e3 pro along with new ram pc12800 gskill 2x2 ddr3 (running in 1066mhz due to my q6600)

Everythingi s running perfectly...except some random BSOD. 4 total this week.

I have posted a pack of dump file in here, the last 4 ones are the ones that represent the 4 BSOD I had and that I cannot explain.

the others ones are for various reasons, crashes who happenned during installation but that I was able to resolve.

What is weird is that my BSOD only happenned when I was surfing explorer on when the CPU was idle at night, with utorrent running.
today mc pc got BSOD at 11:54 AM after 1 night or running perfectly. it is open since then and running perfectly again.

All the afternoon for 4 hours it loaded utorrent, I cam back from the university and started to play empire total war and lot of MW2 multiplayer.

Everything is working perfectly, no BSOD !! But I'm afraid to leave my pc open this night...when the BSOD happen I usually have to reboot manually because if it reboot by itself it lead to a DOS screen saying to select a boot device.
Help me someone... I cannot believe me G-skill memory are faulty, otherwise they would have failed in-game.

I suspect nvidia drivers 195.62 can be responsible for thoses bluescreen. The power management tool is not working properly and whatever the option I choose in the nvidia panel it will sometimes lower my frequencies and sometimes it will keep the stock one.

A st... Read more

A:Random BSOD - Fresh install, fresh system

I think I must also mention that BSOD didnt always give the same message, wich lead me to confusion in my troubleshooting research.

9 more replies
Answer Match 81.48%

Hey, I'm installing windows XP onto a 500 g SATA hard disk that I just installed into a Dell Dimension 9100.

I have an .iso file that I need to place onto a DVD to serve as the OS boot disc. My DVD-R is in my Mac. So i need to burn this .iso file on the mac but have it boot the PC..

What is the proper file extension for the dvd file? is there anything I need to do that I'm missing?
 

A:Fresh Windows XP Install on a Fresh Hard Drive using a Burned DVD OS install - PLZ HL

http://hints.macworld.com/article.php?story=20060619181010389
 

2 more replies
Answer Match 81.06%

Hey all,
First post here. Apologies if I mess something up. Going to include all of the information I can at the top and work from there.
Current build: Intel Core i7-5820K, EVGA GeForce GTX 980 Ti, Fractal Design Define R5 (Black) - xnaasDT - xnaas's Saved Part List - PCPartPicker
Old build (until I update my site): Desktop Specs
Dump files:

https://p.xnaas.me/020116-6937-01.ziphttps://p.xnaas.me/020316-7984-01.ziphttps://p.xnaas.me/020416-7468-01.zip

How this started
So I was running on my old build just fine. I wanted to upgrade from an i7 to make streaming hurt a bit less and maybe experiment around with some server stuff. Anyway, I went to Fry's on Sunday(?) and bought everything. I got Windows installed and everything the following day (Feb 1, where the first BSOD occurs). When I installed Windows, I completely wiped my SSD and did a new install of Windows 10 Pro via USB. Installed all my drivers and thought everything would be good to go. BSOD on day 1. I thought it couldn't be too big of a deal and went on.
Where we are now
Now, I've gotten 3 BSODs. I cannot get another one to happen. I ran memtest overnight and my RAM completed 48 passes with 0 errors. I know this isn't a 100% sure way to know that the RAM is fine, but it seems like a pretty good indicator. Granted, it's Patriot, which is like the lowest tier of RAM, so it's very likely I just have faulty RAM.
I've attached SSD and RAM support lists. Technically neither is on the list, but it see... Read more

A:Random BSODs after Hardware Upgrade and Fresh Windows Install

I should add that I have found no corruption in windows running
Code:
sfc /scannow
or various
Code:
DISM
commands. CHKDSK also returned back to me clean.

2 more replies
Answer Match 81.06%

Hey all,

First post here. Apologies if I mess something up. Going to include all of the information I can at the top and work from there.

Current build: Intel Core i7-5820K, EVGA GeForce GTX 980 Ti, Fractal Design Define R5 (Black) - xnaasDT - xnaas's Saved Part List - PCPartPicker
Old build (until I update my site): Desktop Specs
Dump files:https://p.xnaas.me/020116-6937-01.zip
https://p.xnaas.me/020316-7984-01.zip
https://p.xnaas.me/020416-7468-01.zip

How this started
So I was running on my old build just fine. I wanted to upgrade from an i7 to make streaming hurt a bit less and maybe experiment around with some server stuff. Anyway, I went to Fry's on Sunday(?) and bought everything. I got Windows installed and everything the following day (Feb 1, where the first BSOD occurs). When I installed Windows, I completely wiped my SSD and did a new install of Windows 10 Pro via USB. Installed all my drivers and thought everything would be good to go. BSOD on day 1. I thought it couldn't be too big of a deal and went on.

Where we are now
Now, I've gotten 3 BSODs. I cannot get another one to happen. I ran memtest overnight and my RAM completed 48 passes with 0 errors. I know this isn't a 100% sure way to know that the RAM is fine, but it seems like a pretty good indicator. Granted, it's Patriot, which is like the lowest tier of RAM, so it's very likely I just have faulty RAM.

I've attached SSD and RAM support lists. Technically neither is on the list, but... Read more

A:Random BSODs after Hardware Upgrade and Fresh Windows Install

Please delete this thread. I realize now I just posted into the Windows 7 forums instead of 10. Oops!

1 more replies
Answer Match 79.8%

I'm sorry but I'm new at this but I'm at a loss at what I'm suppose to do. Just got in the mail 2 ssd's and the HD7870 video card along with a copy of windows 8.1 complete (retail). My boot ssd (one I'm trying to install on) is a 60gb Mushkin and the other is the one I was going to put games on the 240gb Mushkin.

So I hooked the 60gb one up and put in my install disk for the 64bit of windows 8.1. It went through the install fine, then it said it needed to restart to complete and when it restarted it gave me the black screen of death. It sat there for over 30 minutes then the screen turned to a yellowish orange.

So I formatted the ssd, reinstalled fresh again. Same thing.

I then tried the 240gb thinking maybe I had a bad ssd. Same thing.

Then I tried an old 500gb Seagate that I knew worked but I formatted it and installed. Same thing.

So back to the 60gb I went, formatted, reinstalled 8.1 then it did the black screen again. So I tried booting over a couple times till it gave me the option to start in safe mode with networking. It started in a black screen with the blue windows logo... and stayed there for an hour.

I then tried the command prompt methods of BOOTREC/FIXMBR, BOOTREC/FIXBOOT, BOOTREC/REBUILDBCD and restarted with same black screen. *after the rebuildbcd, it said copies of windows = 0???*

So I tried to start using the install CD as a recovery drive, it brought up the option to install windows....

I'm not sure how I can get dumps or test st... Read more

A:Fresh install on Fresh SSD of 8.1, restarts into BSOD

Hi MitchellTyner,

First, I looked up your motherboard and it does not formally support any OS beyond Windows 7 so that could be an issue right off the bat; however, if you are running the latest BIOS, you could try and set your BIOS to default values and try that clean install without the 7870 first. Then, if it works, you could try installing the 7870 thereafter. BTW, good luck in finding all the correct drivers for your older hardware as well.

Clean Install - Windows 8

my2cents

10 more replies
Answer Match 75.6%

Windows 7 x64 Ultimate, not OEM. Hardware is 8 months old, OS was freshly reinstalled 3 days ago. Based on the most recent dump this appears to be related to my Linksys WMP54gs and a possible incompatibility with Windows 7. I have already RMA'd my RAM and the new modules passed a mem test.
The OS drive passed a diagnostic test as well.
The blue screens tend to occur when browsing the internet. Any help is appreciated.

Thanks

A:Win 7 x64 Ult BSOD after fresh install

  
Quote: Originally Posted by neowizard87


Windows 7 x64 Ultimate, not OEM. Hardware is 8 months old, OS was freshly reinstalled 3 days ago. Based on the most recent dump this appears to be related to my Linksys WMP54gs and a possible incompatibility with Windows 7. I have already RMA'd my RAM and the new modules passed a mem test.
The OS drive passed a diagnostic test as well.
The blue screens tend to occur when browsing the internet. Any help is appreciated.

Thanks


Actually two of these point to your broadcom wireless driver bcmwi664.sys. I would reinstall that and see how it goes. There is a hardware problem of some sort but until you fix the wifi driver we cant tell for sure
Ken


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\090310-16816-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

WARNING: Whitespace at end of path element
Symbol search path is: SRV*C:\symbols;*http://msdl.microsoft.com/download/symbols ;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02a5a000 PsLoadedModuleList = 0xfffff800`02c97e50
Debug session tim... Read more

4 more replies
Answer Match 75.6%

Let me know what you need. Just installed a fresh x64 pro on a new mb. ive been crashing non stop so it seems to be gpu, ram, or cpu. <3 Thanks guys.

A:bsod after fresh install

im having BSOD errors with my new and first build. Have been trouble shooting for days. even with fresh install...everything tested fine but somewhere somehow there is a sofware error. Reinstallation fixes it for awhile but then its back. Do you game, maybe thats part of it, battlefield bad company 2 is the usual cause but not always. maybe someone will help us lets cross out fingers

5 more replies
Answer Match 75.6%

Hi all,

Re-installed Windows 7 ultimate x64 the other day and since then I've had 10 BSOD over the last 5 days. The latest 2x (attachment included) happened this morning after I turned the PC on (before I could do anything).
I don't really have anything loading on start-up either and the BSOD's seem to be random too.
Checked Computer Management and all drivers seem installed.

if you want to see the other BSOD minidumps, just let me know and I can upload them too.

Regards,

A:Often BSOD since fresh install 7 64x ult...

I'm going to go out on a limb here and say it's your logitech webcam.
All the drivers for it are horribly dated (pre windows 7 by date alone)
I would see if there are some updated drivers/software available for the model you have via logitech's website.
Or, remove it.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002a8a7e5, Address of the instruction which caused the bugcheck
Arg3: fffff880037befa0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------
OVERLAPPED_MODULE: Address regions for 'luafv' and 'LVMVDrv.sys' overlap

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
nt!SwapContext_PatchXSave+42
fffff800`02a8a7e5 4983be1801000000 cmp qword ptr [r14+118h],0

CONTEXT: fffff880037befa0 -- (.cxr 0xfffff880037befa0)
rax=0000000000000000 rbx=fffff88002d... Read more

4 more replies
Answer Match 75.6%

Hello, I just recently re-installed my Win7 64bit home Premium...was getting alot of BSOD thought maybe it was os related...After re-installing I have gotten 3 more. After a little searching I d/l Bluescreen viewer, then wound up testing my Ram one stick at a time,with memtest86, in the same slot. 3 passed one failed removed it. Got another one urgghhhh. anyways heres the info from 3 BSOD since I reinstalled.........

==================================================
Dump File : 112110-16926-01.dmp
Crash Time : 11/21/2010 8:14:48 PM
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x0000000a
Parameter 1 : fffff800`42672dc8
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`00000001
Parameter 4 : fffff800`02ad8149
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+70740
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16617 (win7_gdr.100618-1621)
Processor : x64
Computer Name :
Full Path : C:\Windows\MiniDump\112110-16926-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7600
==================================================
==================================================
Dump File : 112110-19921-01.dmp
Crash Time : 11/21/2010 12:29:26 AM
Bug Check String : SYSTEM_SERVICE_EXCEPTION
Bug Check Code : 0x0000003b
Parameter... Read more

A:WIN 7 BSOD Fresh install

  
Quote: Originally Posted by Rzeman


Hello, I just recently re-installed my Win7 64bit home Premium...was getting alot of BSOD thought maybe it was os related...After re-installing I have gotten 3 more. After a little searching I d/l Bluescreen viewer, then wound up testing my Ram one stick at a time,with memtest86, in the same slot. 3 passed one failed removed it. Got another one urgghhhh. anyways heres the info from 3 BSOD since I reinstalled.........

==================================================
Dump File : 112110-16926-01.dmp
Crash Time : 11/21/2010 8:14:48 PM
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x0000000a
Parameter 1 : fffff800`42672dc8
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`00000001
Parameter 4 : fffff800`02ad8149
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+70740
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16617 (win7_gdr.100618-1621)
Processor : x64
Computer Name :
Full Path : C:\Windows\MiniDump\112110-16926-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7600
==================================================
==================================================
Dump File : 112110-19921-01.dmp
Crash Time : 11/21/2010 12:29:26 AM
Bug Check Str... Read more

4 more replies
Answer Match 75.6%

ok so i fresh installed my computer brand new now i have a stock CPU fan and i think my CPU is overheating or something to do with heat or my CPU now the BSOD said it was a Thread or somthing it sounds to me a CPU thread so can you help me out thanks

A:BSOD after fresh Install why?

  
Quote: Originally Posted by Sam00


ok so i fresh installed my computer brand new now i have a stock CPU fan and i think my CPU is overheating or something to do with heat or my CPU now the BSOD said it was a Thread or somthing it sounds to me a CPU thread so can you help me out thanks


Ok

Where to start


1-SPTD.SYS. used in alcohol/daemon tools is hideous for BSOD's

ASACPI.sys Sun Mar 27 22:30:36 2005





Quote:
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 8th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).


2-Your VB compiler.

This is what caused this crash.

3-AV and firewall. We recommend Microsoft Security Essentials and win 7

4-Memory

Just to be sure I would run memtestDownload a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.
Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot. Test the sticks individually, and if you find a good one, test it in all slots.

Ken

Code:

Microsof... Read more

2 more replies
Answer Match 75.6%

I recently installed Windows 7 Ultimate 64 Bit onto a partition on my harddrive. I didn't do a clean install due to needing a few things from a beta install of Windows 7 32 bit on another partition.

Currently, the computer runs fine, other than when running flash (through youtube) or bitlord it seems to get the bsod. I'm currently only using firefox with the newest flash plugins installed due to no 64 bit support yet. I've only installed the drivers that windows 7 has given me along with:

Adobe Creative Suite
Aim 7
K-Lite Codec
Magic Disc
Magic Iso Maker
Microsoft Office Enterprise
Mozilla Firefox
VLC Media Player

A:BSOD After fresh install

  
Quote: Originally Posted by Seraphinax


I recently installed Windows 7 Ultimate 64 Bit onto a partition on my harddrive. I didn't do a clean install due to needing a few things from a beta install of Windows 7 32 bit on another partition.

Currently, the computer runs fine, other than when running flash (through youtube) or bitlord it seems to get the bsod. I'm currently only using firefox with the newest flash plugins installed due to no 64 bit support yet. I've only installed the drivers that windows 7 has given me along with:

Adobe Creative Suite
Aim 7
K-Lite Codec
Magic Disc
Magic Iso Maker
Microsoft Office Enterprise
Mozilla Firefox
VLC Media Player


Hi and welcome

this crash was probably caused by your wifi driver wusb54gv4x64,sys. It is from 2006 and needs to be updaged

Ken J+


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\012110-36000-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a68000 PsLoadedModuleList = 0xfffff800`02ca5e50
Debug session time: Thu Jan 21 10:46:42.329 20... Read more

4 more replies
Answer Match 75.6%

My friend has an HP Media Center PC. It had Vista x86 installed when he bought it about 2-3 years ago. It ran fine for a long time but recently began getting the BSOD randomly. He thought it may have been too many antivirus programs along with poor maintenance of it. So he bought Windows7, but doesn't know enough about computers to do it himself so he had me do it. I installed Win7 x86 and installed TrendMicro antivirus, which he also has on his laptop, so he wanted that on his desktop as well. I also installed Office 2003 and a few other progs (firefox, adobe reader, flash.. basic stuff). It still randomly goes to BSOD. I followed your instructions, and am posting the zip file you request.

A:BSOD on fresh install

The volume dirty flag is set on the hard disk.
Try this:

Quote:




CHKDSK /R /F:
Run CHKDSK /R /F from an elevated (Run as adminstrator) Command Prompt. Please do this for each hard drive on your system.
When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter. Then reboot and let the test run. It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors. See "CHKDSK LogFile" below in order to check the results of the test.

Elevated Command Prompt:
Go to Start and type in "cmd.exe" (without the quotes)
At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"

CHKDSK LogFile:
Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter
Expand the Windows logs heading, then select the Application log file entry.
Double click on the Source column header.
Scroll down the list until you find the Chkdsk entry (wininit for Win7) (winlogon for XP).
Copy/paste the results into your next post.




Then run another copy of the perfmon report to see if it's still mentioned there.
If so, then try this:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
http://www.carrona.org/memdiag.html (read the details at the link)
http://www.carrona.org/hddiag.html (read the details at t... Read more

11 more replies
Answer Match 75.6%

I have an HP tx2z-1000, AMD Turion X2 Dual-Core Mobile RM-75 2.20GHz, 8gb Ram, ATI Radeon HD 3200, running windows 8 64-bit.

I've tried installing Windows 8 a few times, each time keep getting bluescreens. I did a fresh install tonight and immediately got 2 BSODs. I downloaded BlueScreenView and have copied/pasted the info from the dumps below. Any suggestions would be most helpful!

BSOD 1
==================================================
Dump File : 112212-30451-01.dmp
Crash Time : 11/22/2012 8:43:14 PM
Bug Check String : NTFS_FILE_SYSTEM
Bug Check Code : 0x00000024
Parameter 1 : 000000b5`0019060b
Parameter 2 : fffff880`18df04e8
Parameter 3 : fffff880`18defd20
Parameter 4 : fffff800`49c869f5
Caused By Driver : Ntfs.sys
Caused By Address : Ntfs.sys+40cf8
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7b040
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\112212-30451-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 9200
Dump File Size : 278,400
==================================================


BSOD 2
==================================================
Dump File : 112212-17269-01.dmp
Crash Time : 11/22/2012 8:46:24 PM
Bug Check String : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x0000001e
Parameter 1 : f... Read more

A:BSOD on Fresh Win 8 Install

Just had another bluescreen:

BSOD 3
==================================================
Dump File : 112212-18283-01.dmp
Crash Time : 11/22/2012 9:35:36 PM
Bug Check String : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x0000001e
Parameter 1 : ffffffff`c0000005
Parameter 2 : fffff803`e4ec46c1
Parameter 3 : 00000000`00000000
Parameter 4 : ffffffff`ffffffff
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7b040
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7b040
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\112212-18283-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 9200
Dump File Size : 278,512
==================================================

14 more replies
Answer Match 75.6%

I installed an SSD and put a new copy of win 7 pro on it, within a day it crashed. I rarely ever see the BSOD, I usually see the windows has recovered from an unexpected error screen.

The new installation only has a few application installed, mostly just window updates, microsoft security essentials, steam.

I ran memtest and didnt come up with any errors.

A:fresh install still get BSOD

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 00005a800ac1c3bb, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002a8a3c9, address which referenced memory

Debugging Details:
------------------

TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cb1100
GetUlongFromAddress: unable to read from fffff80002cb11c0
00005a800ac1c3bb Nonpaged... Read more

9 more replies
Answer Match 75.6%

Hi,

I had the same problem that others have had with the new nVidia driver causing a BSOD but mine seem to be a little worse off. After uninstalling the nVidia driver the defult windows drivers caused my computer to just black screen after boot. I would see the windows 7 load screen but never the login screen (just black w/ no mouse). So I decided to fresh install by formatting and installing.

After fresh install the same problem happens upon first true boot I see the black screen only. After about 10-30 seconds the BSOD will appear saying it is there due to video card driver timeout. I dont know what i should try next since I am on my 3rd fresh install with the same problem.

I installed XP again and all is fine with the most up to date video driver as well.


Any ideas?

A:BSOD after fresh install

Another update, I was wrong in saying that windows 7 ever fully installed, it will go to a black screen now before instalation is complete...

6 more replies
Answer Match 75.6%

Thanks in advance for any help!

I had a nasty virus a month ago, can't recall the exact name but something along the lines of Security 2012. After cleaning it up with malwarebytes I started getting random interval bsods with different drivers being blamed each time. I clean installed xp and even before installing any drivers for video card etc, I got a bsod, blaming tcpip.sys. Ran a repair, and the machine ran for 10 hours while I was at work with nothing installed. Once home and starting to install drivers for sound, video etc, the bsods showed up again randomly. Some blaming the soundmax drivers, some sisnic.sys, and so on.

The kicker is that the machine runs absolutely perfect in safe mode.

Things I have tried:

clean install 4 times
repair from xp cd
fix mbr
new pagefile
sfc /scannow
swapped out ALL memory
cleaned out case (wasn't dirty anyways)
unplugged various hardware, still crashed
Probably a thousand other things that are slipping my mind at the moment.

If you need any additional info, let me know. It's an older build, but worked just fine for my needs till all this happened. I'm on a budget lately so was hoping to fix this without buying new crap.

mobo: asus p4s800d-x
vcard: ati radeon x1950 pro
memory: gskill 1gb x2
power: rosewill rp600v2
hd: maxtor 6L300R0

A:Bsod even after fresh install.

Seems like you did everything else try and run diagnostics on the HDD Download the ISO image for SEAtools for DOS and burn the image with IMGBurn in my signature and boot off of the newly created CD and run the Quick and the Advanced tests on the drive. You can also download the ISO Image for Memtest in my signature and burn the image to CD using IMGBurn and boot off of the that CD with one stick of RAM in at a time and run the test on each stick of RAM separately. If all comes up clean then you can also try using a different PSU.

4 more replies
Answer Match 75.6%

Hello all. I was experiencing random BSOD occurrences so I decided to do a fresh install of Windows 7 Pro in hopes of alleviating this wicked disease. Plus, I wanted to put in a new SSD so thought now is the time. Well after returning home this morning from work I fired up the PC and was greeted with the "Windows has unexpectedly shut down blah blah blah" prompt. Well, I'm here seeking assistance.

As I mentioned, this is a fresh install. I've only installed the OS, Adobe Acrobat, Google Chrome, ESET SMart Security, Office 365, and software for my HP printer. Oh, and of course all the Windows updates. I'm hoping to get this resolved before installing any of my other applications. I look forward to any assistance I can get!

More replies
Answer Match 75.6%

Hi! I am new here, but I have been lurking for a little while. I am in the need of some BSOD help!

We were having issues with a Dell e6400 with an i7 4 GB Ram loaded with Win XP. After Id a NIC driver as the issue per a dell rep we eventually decided to move to Windows 7 64 bit.

After the install it has been BSOD hell. The machine is used for a software developer who works for me.

here is the most common crash dump.
-------------------------------------------------------------------------------------
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8005671028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000b6000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000185, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: f

STACK_TEXT:
fffff880`033efa58 fffff800`0320ca3b : 00000000`00000124 00000000`00000000 fffffa80`05671028 00000000`b6000000 : nt!KeBugCheckEx
fffff880`033efa60 fffff800`02d9d7d3 : 00000000`00000001 fffffa80`052a2ce0 00000000`00000000 fffffa80`052a2d30 : hal!HalBugCheckSystem+0x1e3
fffff... Read more

A:BSOD Fresh Install

have you verified that you are running the most recent BIOS updates?

18 more replies
Answer Match 75.6%

Hi, I reformatted and installed a fresh copy of Win7 Pro x64 on my PC because it was having BSOD issues and then reinstalled my chipset, network, and audio drivers. Not long after installing only those things I experienced another BSOD. I'm not sure what caused it but I'm 100% sure its not my RAM or my processors. Ive run Memtest 86+ multiple times for over 7 passes as well as a stress test on my CPU which ran for 6 hours with no problems. The problem that came up was a 7f. Here is the dump and thank you for your time!

A:BSOD on fresh install

Welcome!

Please enable driver verifier: Driver Verifier - Enable and Disable

After it has caused several crashes, follow these directions: http://www.sevenforums.com/crashes-d...tructions.html

Thanks,
~JK

...Summary of the Dumps:
Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sun Aug 15 13:29:55.566 2010 (GMT-4)
System Uptime: 0 days 0:08:02.096
BugCheck 7F, {8, 80050031, 6f8, fffff80002ad031d}
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
PROCESS_NAME: drvinst.exe
??????????????????????????????????????????????????????????????????????????????????????

9 more replies
Answer Match 75.6%

Just did a fresh install a couple days ago, and still getting multiple BSOD`s. I have basicly just let the rig sit there with the power on to see if it was stable. It was not....

I have not installed any drivers or anything myself. Just webbrowsers, spotify and fan control software from ASrock

I sure hope someone is able to understand what is going on
DESKTOP-9A0MGS7-07-Oct-16_101952_34.zip

More replies
Answer Match 75.6%

ok so i have an alienware area 51 with dual nvidia gtx 480 video cards.
i was getting constant bluescreens so i spoke to alienware crapsupport and they told me to reinstall windows. which i did. low and behold a few minutes in i start getting blue screens.

At first the bsdo were in regards to the iastor driver, which i updated and then the blue screens switched over to ntoskrnl blue screen. but this last bsod was iastor again. not sure what to do.

I am not sure what else to look for i have attached the last few dmps in hopes someone can help me. i am having to post this from safe mode, it doesnt stay on long enough in regular mode to post.

specs: 12gb ram, dual gtx480 video cards, raid 0 ssd drives for C and raid 1 for data drive(1.5tb sata drives).

i am attaching a zip of the last few dmps, as well as a screenshot from bluescreenviewer and device manager with some driver version.
any help would be much appreciated!
thanks!

A:BSOD win 7 ult x64, after fresh install!

Hi and welcome to SF

You need to update your Intel Storage drivers

http://downloadcenter.intel.com/Default.aspx

http://downloadcenter.intel.com/Deta...-bit*&lang=eng


Finish with this step and post back with any results.

6 more replies
Answer Match 75.6%

Just did a fresh install a couple days ago, and still getting multiple BSOD`s. I have basicly just let the rig sit there with the power on to see if it was stable. It was not....

I have not installed any drivers or anything myself. Just webbrowsers, spotify and fan control software from ASrock

I sure hope someone is able to understand what is going on :)

My hardware is a few years old, but have not been acting up like this before.
Memtest passes with no faults. Must be a windows 10 thing

perfmon.zip

SysnativeFileCollectionApp.zip


OS - Windows10 x64


? CPU - I5 2500K
? AMD HD7870
? ASrock Z77 Pro4
Nvidia 7870
16GB Corsair DDR3 RAM
? 1200W Gold standard PSU
2x128GB SSD in Raid0

More replies
Answer Match 75.6%

hi all, i was getting a random bsod prior to a clean install and it is still here.
steps
ran memtest on each stick of rm for 4 passes with no errors.
updated all drivers
latest bios installed

attached are the files listed on the bsod posting instructions these are prior to driver verifier running.

i will update with the driver verified dump files after the next bsod.

A:bsod after fresh install

One crash blames video driver. Other than that I don't see anything that sticks up. All your drivers appear up to date.

I will wait to see if verifier catches anything.

In the meantime, please re-run memtest. This time let it run on all sticks for 7-8 passes
Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+ - Windows 7 Forums

Also run Prime95
Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html

Do this after running verifier; not while it is running.

BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Debug session time: Sat Jan 21 14:34:09.789 2012 (UTC - 5:00)
System Uptime: 0 days 2:23:34.257
Probably caused by : ntkrpamp.exe ( nt!SepCreateImpersonationTokenDacl+20 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR: 0x8E
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: 0x8E_nt!SepCreateImpersonationTokenDacl+20
BiosReleaseDate = 12/04/2009
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Debug session time: Fri Jan 20 14:43:59.824 2012 (UTC - 5:00)
System Uptime: 0 days 0:11:06.666
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded... Read more

8 more replies
Answer Match 75.6%

Can anyone tell me how I can resolve this BSOD? I have included the dump file. It means nothing to meSYSTEM_SERVICE_EXCEPTION (3b)An exception happened while executing a system service routine.Arguments:Arg1: 00000000c0000005, Exception code that caused the bugcheckArg2: fffff880084de1b9, Address of the instruction which caused the bugcheckArg3: fffff8800c83e9e0, Address of the context record for the exception that caused the bugcheckArg4: 0000000000000000, zero.Debugging Details:------------------TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".FAULTING_IP: tbs5925+41b9fffff880`084de1b9 41ff942488000000 call qword ptr [r12+88h]CONTEXT: fffff8800c83e9e0 -- (.cxr 0xfffff8800c83e9e0)rax=ffff000004cd35b0 rbx=fffff8800c83f430 rcx=fffffa800d841000rdx=0000000000000000 rsi=fffffa800d841000 rdi=fffffa800d7f1520rip=fffff880084de1b9 rsp=fffff8800c83f3c0 rbp=fffffa800b3826b8 r8=fffff8800c83f423 r9=fffffa800dbe1f70 r10=0000000000000000r11=0000000000000000 r12=fffffa800dbe1f50 r13=fffffa800d841000r14=0000000000000000 r15=0000000000000001iopl=0 nv up ei pl zr na po nccs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010246tbs5925+0x41b9:fffff880`084de1b9 41ff942488000000 call qword ptr [r12+88h] ds:002b:fffffa80`0dbe1fd8=????????????????Resetting default scopeDEFAULT_BUCKE... Read more

A:BSOD after fresh install

I would guess that it's more than just a "fresh install" because the software that's causing your problem is DVB Dream. I googled it & it's a program that allows you to watch satellite TV on your computer. It's not a part of Windows so you must have installed it afterwards. Either that or you have a modified Windows installation disc.

3 more replies
Answer Match 75.6%

I am installing Windows XP on my machine after the old hard drive crashed. Have a brand new hard drive, nothing on it (I think? see below for explanation).

My system was overheating and I installed a new fan and after the first boot after installing the new fan, the computer would reset itself when attempting to start Windows. I was only able to get it to run in fail-safe settings in the BIOS. This made/makes no sense to me as it was running fine before that. It runs fine with proper voltage settings from a bootable Knoppix CD. I can access the internet, use X-windows without a hitch. I lived with the voltage issue for a bit before the hard drive died (it was 8 years old and had been swapping almost constantly due to low RAM). There were no other issues with the computer except it would not boot with proper voltage settings.

I have a brand new 250GB PATA WD drive and when I went to install XP Home, it got to the point where it says Setup is now starting Windows... and then crashed to a BSOD with the error message "DRIVER_IRQL_NOT_LESS_OR_EQUAL". I tried to run the install in fail-safe and again it still had no issue, I was able to get to the part where it asks if I want to install, repair, or quit, so I would possibly be able to install if I were to choose to live with that issue.

Restarted, tried proper settings in the BIOS, double checked the jumper on the mbd (Chaintech CT-7NJL6) and it's correct, this time it gave me an error that said "An ... Read more

A:BSOD during fresh install

and welcome to the Forum

I would run diagnostics on the hard drive . .

Diagnostic Utilities Here

See this for how to make a bootable cd

15 more replies
Answer Match 75.6%

Hi,

I have a Lenovo Windows 7 64bit Computer where I'm getting a BSOD. I've attached the file if someone can help me determine what is causing the crash. I uninstalled and reinstalled the software but I'm wondering if it has something to do with QuickBooks - I see there are error messages in the event log about menu itmes missing.

Ed

A:BSOD - Fresh install

Hello and welcome eclarke if you can boot into safe mode and run these


http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html

1 more replies
Answer Match 75.6%

hi,,,i have problem with my laptop toshiba satellite L510 Model PSQL8L-00L800

first i just got BSOD cause overheat so i clean it up and everything else after that i try fresh install windows 7 32 bit i got randomly BSOD.


like when i open drive D or just install aplication
here my dump
https://docs.google.com/file/d/0B2wB...it?usp=sharing

A:BSOD after fresh install

Please provide all the files following this tutorial so we can provide a complete analysis: Blue Screen of Death Posting Instructions

1 more replies
Answer Match 75.6%

First off I think it's my graphic card drivers that have been giving me problems so in a fresh install I hoped to fix that but I had one BSOD last night. I would be thankful if someone could have a quick look at my dumps. It says I'm not using a virus program in the file but I am using Microsoft Security Essentials and MalwareBytes.

Installed my Drivers in Driver Genius.

Operating System 64 bit Windows 7 Retail.

Using a Radeon Hd5670
Who Crashed gave me this.
This was probably caused by the following module: ntoskrnl.exe (nt+0x80640)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF800031A7909, 0xFFFFF88003FE1A50, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.

A:BSOD for a while now Fresh install and I get another one

Just had another BSOD whilst watching a Video on my pc.

On Sat 08/10/2011 13:06:44 GMT your computer crashed
crash dump file: C:\Windows\Minidump\100811-36613-01.dmp
uptime: 00:33:28
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x1A (0x41287, 0x0, 0x0, 0x0)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.

5 more replies
Answer Match 75.6%

Hello. I'm working on my cousins computer. Upon starting windows i catch a BSOD 75% of the time. Other times it will freeze on the "Starting Windows" screen.

I've used UBCD to format the HDD
I've used UBCD Memtest86 - Test passed
I've tried using the system restore disk provided by the manufacturer
I've physically inspected the computer and have reseated power cables and RAM

Please help, Any input would be greatly appreciated!

A:BSOD after fresh install

  
Quote: Originally Posted by Nano3


Hello. I'm working on my cousins computer. Upon starting windows i catch a BSOD 75% of the time. Other times it will freeze on the "Starting Windows" screen.

I've used UBCD to format the HDD
I've used UBCD Memtest86 - Test passed
I've tried using the system restore disk provided by the manufacturer
I've physically inspected the computer and have reseated power cables and RAM

Please help, Any input would be greatly appreciated!


Boot into safe mode (or boot from win 7dvd) and find DMP files to upload to us.


To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

1 more replies
Answer Match 75.6%

this is my first custom i can access bios menu on start up all seems fine but if i try to install windows 7 it loads files then blue screen right after the windows load thing pops up. im at a loss here please help

More replies
Answer Match 75.6%

I just did a fresh install of Windows 7 Professional 32bit. Everything seems to be going fine, but shortly after I log in (anywhere from 15 seconds, to a couple of minutes), it BSOD's.

I can boot into safe mode fine without this happening.

The only odd thing I've noticed, is if I open up Internet Explorer, that causes a BSOD almost immediately.

Attached my log, thanks!

A:BSOD after fresh install

  
Quote: Originally Posted by marble1980


I just did a fresh install of Windows 7 Professional 32bit. Everything seems to be going fine, but shortly after I log in (anywhere from 15 seconds, to a couple of minutes), it BSOD's.

I can boot into safe mode fine without this happening.

The only odd thing I've noticed, is if I open up Internet Explorer, that causes a BSOD almost immediately.

Attached my log, thanks!



This crash was caused by hardware. Please go here to find out what it means and what to try. Stop 0x124 - what it means and what to try
Ken

DMP

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\101010-15958-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\symbols;*http://msdl.microsoft.com/download/symbols/;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0x82817000 PsLoadedModuleList = 0x8295f810
Debug session time: Sun Oct 10 13:19:51.339 2010 (GMT-4)
System Uptime: 0 days 0:04:18.399
Loading Kernel Symbols
...............................................................
.................................................. Read more

1 more replies
Answer Match 75.6%

Hi, I hope someone can give me a hint. A friend of mine has brought me an Acer Aspire 9810 with Vista Ultimate pre charged. It didn't start in normal mode, showing a BSOD with a STOP: 0x8E. No further information about which driver caused it. I was able to run in safe mode just to save documents in a pen drive. A fresh installation led to nothing, again the same error. So I pressed Alt-F10 on boot to roll back the system. It activates a first hidden partition, formats the second one and install the standard condition with original drivers. But after a reboot, after the first start up message, again the same error. Now I can't enter in normal mode for the 8E error, and it doesn't allow me to enter in safe mode as the installation looks like incomplete. Memtest detected nothing.
I took away the first hd, and installed my XP sp3 into the second one. It loads all the original drivers but the ones of the video card, a nVidia GO 7600. If I try to install them, it crashes in a 7E error. Despite of it, it runs in 1024x768x32M (though it moves the windows slowly, the rest goes fine). From there I was able to catch the mini dump from the partition of Vista. I'd appreciate any hint, thanks.

A:Fresh install: BSOD with 8E

Follow these instructions: http://www.techsupportforum.com/1871981-post2.html

We can't get as much information as we'd like to from that text file. The above link will provide us with information about your system and the minidumps themselves.

The only thing that I can see is that the problem was caused by nvlddmkm.sys, but can't yet see if it is actually the problem of if it was something else.

4 more replies
Answer Match 75.6%

My PC has been down for a while now and I've gotten the chance to fix it again. It broke when the hard drive became corrupted and kept on giving BSODs (don't remember the error code for those times). I got a new hard drive and installed it fine but I get BSODs about halfway through an install of windows 7 or 8 (I've tried both incase it was a disc problem) The error I get is a ntfs.sys one and the rest of the error screen is attached,

A:BSOD on Fresh Install

This is a BSOD related to the file system (NTFS) on the hard drive.
I'd suggest running these free, bootable hardware diagnostics:  http://www.carrona.org/initdiag.html
Please start with the hard drive diagnostics.

0 more replies
Answer Match 75.6%

So I recently did a recovery install just to clean the system and I have been getting multiple crashes randomly throughout the day.

Any suggestions?

BSOD Problem Below:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050031
BCP3: 00000000000006F8
BCP4: FFFFF80002A42EB8
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\032211-24975-01.dmp
C:\Users\Mike\AppData\Local\Temp\WER-38984-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:BSOD's Fresh OS Install

  
Quote: Originally Posted by SevenOS


So I recently did a recovery install just to clean the system and I have been getting multiple crashes randomly throughout the day.

Any suggestions?

BSOD Problem Below:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050031
BCP3: 00000000000006F8
BCP4: FFFFF80002A42EB8
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\032211-24975-01.dmp
C:\Users\Mike\AppData\Local\Temp\WER-38984-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt




To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... Read more

8 more replies
Answer Match 75.6%

hi,

I installed win 8.1 pro and i got kernel_security_check_faulire eror. Now every time after i do any operation my computer restarts. I was getting those bsod problems in win 7 ultimate too but wanted to put 8.1 before i resolve problem.

thx for help in advance

A:BSOD-fresh install win 8.1 pro....

If you had BSOD problems in Win7 and now you have them in 8.1, a hardware problem is likely.
Please start with these free diagnostics: Hardware Diagnostics

Additionally, this system is old enough that it may not be capable of running Win8.1. You may be better off going back to Win7 and troubleshooting from there (post over at Windows 7 Help Forums )

Your BIOS dates from 2009. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard. If possible, use the "inside Windows" flash mechanism (if your OEM provides one).

Only 7 Windows Updates installed. Most systems have 60 to 90 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Don't worry about the specific number, it's just important that you have checked and installed any updates that were available.

The lone dump file is corrupted. Please do this:





Upload Dump Files:
NOTE: If using a disk cleaning utility, please stop using it while we are troubleshooting your issues.
Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
Left click on the first minidump file.
Hold down the "Shift"... Read more

2 more replies
Answer Match 75.6%

Hello All,
Thank you in advance for your assistance. I've been helping a friend with his machine and he just recently started getting BSoDs. He thinks it may have been caused by a World of Warcraft update, but he's continuing to get BSoDs with a fresh install of Win7 Home Premium x64.

The machine is a home-built machine with all components purchased from Newegg or Amazon (Amazon itself and not any sub-retailers that sell on amazon).

Specs:
Motherboard EVGA P55 LE
Graphics: EVGA GTX465
Processor: Core i7-870
Ram: 8GB of Crucial
OS: Full Retail
Age of system: 6 months
OS Age: fresh install for 30 minutes prior to BSoD

Memtest86 was clean for several hours.
Things that were installed prior to the crash:
- Norton 360
- MS office
- Google Chrome
-Nero
-Razer drivers
-EVGA Drivers

A:BSoD - Fresh install

  
Quote: Originally Posted by realbass1


Hello All,
Thank you in advance for your assistance. I've been helping a friend with his machine and he just recently started getting BSoDs. He thinks it may have been caused by a World of Warcraft update, but he's continuing to get BSoDs with a fresh install of Win7 Home Premium x64.

The machine is a home-built machine with all components purchased from Newegg or Amazon (Amazon itself and not any sub-retailers that sell on amazon).

Specs:
Motherboard EVGA P55 LE
Graphics: EVGA GTX465
Processor: Core i7-870
Ram: 8GB of Crucial
OS: Full Retail
Age of system: 6 months
OS Age: fresh install for 30 minutes prior to BSoD

Memtest86 was clean for several hours.
Things that were installed prior to the crash:
- Norton 360
- MS office
- Google Chrome
-Nero
-Razer drivers
-EVGA Drivers



Well this one points directly to your Norton 360. Remove and replace with Microsoft Security Essentials

Download and run the Norton Removal Tool to uninstall your Norton product | Norton Support

http://www.microsoft.com/security_essentials/


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\042011-38921-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbol... Read more

1 more replies
Answer Match 75.6%

hey,I just installed Windows Ultimate 64bit on my PC.But from time to time I got a BSOD, this is a new fresh/clean install.The only thing I have done is updating drivers and windows updates.I do have one windows update that won't install: KB2621440 code 800B0100I did:Memtest86: I tested my 2 rams separately both in the 2 slots they were located, all passed up to 9 tests without any errorsSFC/ Scannow: no errors, all fineShckdsk: in step 4 it replaced 2 files: replaced bad clusters in file ...Prime95: could not start the blend test, hardware error occurredThanks in advance.Here is my BlueScreenView Logs:==================================================
Dump File : 082412-16988-01.dmp
Crash Time : 24/08/2012 18:05:18
Bug Check String : SYSTEM_SERVICE_EXCEPTION
Bug Check Code : 0x0000003b
Parameter 1 : 00000000`c000001d
Parameter 2 : fffff960`001d8890
Parameter 3 : fffff880`0abb6b50
Parameter 4 : 00000000`00000000
Caused By Driver : win32k.sys
Caused By Address : win32k.sys+138890
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7f1c0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\082412-16988-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 275.696
==================================================

==... Read more

A:BSOD after Fresh Install

Hello zyon1989,The BlueScreenView report is varied and can implicate many causes.Memtest86: I tested my 2 rams separately both in the 2 slots they were located, all passed up to 9 tests without any errorsI hope you meant "9 passes" as 9 tests aren't even one pass. For moderate confidence in the memory, I would recommend running the test for 12 hours (overnight). There should be no errors reported.Shckdsk: in step 4 it replaced 2 files: replaced bad clusters in file ...Let's have a look at that Check Disk report:In the search box type "Event" and click on "Event Viewer" in top column.Click on "Windows Logs" -->"Application." Click the "Source" tab ( top, right) to alphabetize that column.Arrow down to "Winlogon" and select the most recent Check Disk report.Double click on it and select the "Copy" button. This will copy the report to the clipboard.Copy this into your next post.To help us get a better look at your computer hardware, please follow the instructions below to "Publish a Snapshot" of your system using Speccy.http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792Below is for those who cannot get online:Please take caution when attaching a text file to your post if you cannot copy/paste the link, per above instructions. You will need to edit the text file to make sure that your Windows Key is not present.

15 more replies
Answer Match 75.6%

Windows 7 64 home premium
cpu: Phenom II x4 960t
mobo: Asus M4A87TD EVO
ram: Corsair cmx8gx3m4a1333c9 xms3 4x2gb
psu: Corsair vx 550w
gpu: Asus Radeon 6950

Just installed new cpu and ram as computer has been causing a few hardware related issues did a fresh install still getting random BSOD.

A:BSOD after fresh install

memtest 86+ and windows memory diagnosis found no errors.

9 more replies
Answer Match 75.6%

Hi all,

I'm getting pretty desperate... I have a new Sony Vaio laptop on which I installed a clean Windows and all original drivers. As I kept getting BSODs I decided to do a fresh install, but now I get BSODs even without any drivers installed.

Could anyone check this minidump to try and find out what is causing this? Don't feel like tossing out a brand new laptop...

Thanks a bunch!
Sis
Attachment 154772

A:BSOD after fresh install

Stop 0x124:

BugCheck 124, {0, fffffa80067b1028, ba000000, 400405}
Stack: nt, hal
Probably caused by : hardware

(Stop 0x124 - what it means and what to try)

1. Check the hardware settings:

- cpuz MEMORY tab
- cpuz CPU tab
- Passmark RAMMon HTML.zip

A good idea to check for drivers drivers too,
(although with hal on stack driver updates won't fix you, just a good idea)

2. Citrix Deterministic Network Enhancer
dne64x.sys Mon Nov 10 20:01:24 2008


3. Sony Firmware Extension Parser
SFEP.sys Fri Nov 27 00:39:13 2009





CRASH DUMPS


Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [F:\DMP\051611-69716-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`0281d000 PsLoadedModuleList = 0xfffff800`02a5ae50
Debug session time: Mon May 16 07:26:46.461 2011 (UTC - 4:00)
System Uptime: 0 days 0:26:57.982
Loading Kernel Symbols
...............................................................
................................................................
..........................
Loading User Symbols... Read more

3 more replies
Answer Match 75.6%

Hi guys and gals,

I've been breaking my head above this issue for quite a few days now and spent some hours behind our favourite search engine to no avail.

Basically I've bought a Tyan Thunder K7X Pro Dual Athlon MP mobo with 2x CPU and 3GB RAM off Ebay and spent the pas few days trying to install XP on this piece of $%$%^.

Fresh installs of XP BSOD with the codes 0x0000007B 0xF78DA524 0xC0000034.

I have tried several known working IDE harddisks and quite a few SCSI ones too, powered by an Adaptec 2940 adapter. All of them BSOD the same way. All Google references point to SATA problems... I have none, only the onboard IDE adapters.

My IDE disks are primary master and my IDE DVD-ROM is secondary master. I have no PCI/AGP cards in my system.

Any suggestions will be appreciated.
 

More replies
Answer Match 75.6%

I was instructed by the PC shop to re-install windows 7 after they were unable to find any hardware problems which were causing my system to BSOD or randomly reboot.

Today I did a fresh install of Windows 7 Pro 64-bit, Office 2010 and install all important security updates. Within hrs of completing the installation my system has BSOD twice, for different reasons each time.

I would like some ammunition before heading back to the PC shop.

Any help in resolving this would be great.

Uploading dump collection for both crashes.

Also uploaded windows debug output.

Thanks

A:BSOD after fresh install

There is a high probability that your CPU is defective, are you overlocking?
Dumps directly blame a hardware fault in your CPU, i would recommend that you replace it
Stop 0x124 - what it means and what to try



   Information
Go to your motherboard's website and check your version of your BIOS. See if there are any problems you are having that are solved by a a later version. I do not often recommend flashing the BIOS because there is a risk involved. If there is problem addressed by a BIOS that applies to your computer, consider flashing your BIOS to the latest version. If you choose to do this, flash you BIOS outside of Windows.

Run Prime 95 again to test your CPU and your ram. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8007eae028, f2000000, 10005}

Unable to load image \SystemRoot\system32\DRIVERS\i... Read more

4 more replies
Answer Match 75.6%

Hello fellow PC users

I recently installed Windows 8.1 Pro x64 and the correct up to date drivers for my hardware. I experience a BSOD, it doesn't go into the BSOD right away but after 15-30 minutes of use I get the BSOD with the "page fault in nonpaged area" message.


I have attached my debugfiles and hope that someone much brighter than me in deciphering these files can lend me a hand at fixing this issue.

Any help is greatly appreciated!

Found out it was my new Panda Cloud Free Antivirus. I deleted the POS and installed something else, now no more BSODs.

A:BSOD on fresh Win 8.1 Pro x64 install

Hi DamZe & Welcome to the forums ^_^,

Thanks for posting back the solution ^_^.

If you uninstalled the product directly then please make sure that you run this **TOOL** so that the leftover files are deleted of the Panda Cloud AV.

3 more replies
Answer Match 75.6%

I have been getting bsods recently at first it was only when trying to play BF3 i couldnt play for more than 5 min before bsod. now its moving its way into normal functions.

i will include a dx diag and cpu z .txt file

Here are the reports from the time frame i recieved the bsod. Iwill also include the one i got last night before i gave up.

Let me know if there is anything else I should include

Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 3/20/2012 4:21:37 PM
Event ID: 1001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Dennis-PC
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 (0x0000000000000000, 0xfffffa8007ee3028, 0x00000000b61b2000, 0x00000000f9000135). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 032012-74225-01.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-03-20T20:21... Read more

A:BSOD Even after fresh install

Maybe this will help too

19 more replies
Answer Match 75.6%

I just installed a new SSD yesterday. I did a fresh install of windows and formatted my previous hard drive to use as a storage drive.

It worked fine all day without an error. I started her up tonight and got a PFN_LIST_ERROR BSOD. I understand that installing a new SSD can have issues, so I want to pinpoint what this issue is so that I can nip it in the bud now and not have to worry about it later.

Attatched are the files requested, as well as the original dump.

A:BSOD new SSD fresh install

Hi -

The system crashed just 2 seconds after boot-up.

From the partition info, it appears to me that both the 120 GB OCZ-AGILITY3 SSD and the 1 TB ST31000524AS SATA HDD have Windows OS installed.

Disconnect the HDD; reinstall Windows 7 onto the SSD.


Regards. . .

jcgriff2


`



BSOD SUMMARY

Code:

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\012412-5631-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Jan 24 22:22:59.982 2012 (GMT-5)
System Uptime: 0 days 0:00:02.215
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+175b6 )
BUGCHECK_STR: 0x4E_7
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x4E_7_nt!_??_::FNODOBFM::_string_+175b6
Bugcheck code 0000004E
Arguments 00000000`00000007 00000000`00204131 00000000`00000001 00000000`00000000
??????????????????????????????????????????????????????????????????????????????????????``

6 more replies
Answer Match 75.6%

Hey guys, I have a client that was having problems with her machine crashing.

Brand new Dell Optiplex 380, Intel Core 2 Duo 3Ghz, 4GB, Win7 Pro 64 Bit, Intel Graphics.

Running Vipre Antivirus, Mozy Online Backup, and variety of other programs (Word 2003, Office 2010, HotDocs)

I formatted the machine the other day as she was having problems originally, so I decided to wipe the preloaded image and start over. Today (1 day later) she was having problem connecting remotely using Logmein Pro.

WhoCrashed:

On Fri 4/22/2011 2:33:12 PM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: cdd.dll (cdd+0xDC51)
Bugcheck code: 0x50 (0xFFFFF900C74527A0, 0x0, 0xFFFFF960006BDC51, 0x0)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\cdd.dll
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: Canonical Display Driver
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.


I attached the memory dump, but I have been beating my head on this.

Was going to remove Vipre for a week and see how it goes but I haven't had any issue with ... Read more

A:BSOD - Just did fresh install

Your RaInfo.sys, part of LogMeIn seems to be the cause. Please remove this software

3 more replies
Answer Match 75.6%

Hey,english is not my native language,i hope you guys understand.
I had to re-install windows 7 in one pc and after that every programa/game is crashing and BSOD,before that this pc runs perfectly.
I just run "Driver Verifier" and pc freeze in 5 minutes,surely is a driver issue
Already installed gpu and chipset drivers,i dont know what i have to do.

A:BSOD after a fresh install

Just forget the one in the first post.

CPU - AMD ATHLON X3 425
Video Card - R7 250
MotherBoard? ASUS M2N68-AM SE2
Power Supply - SEVENTEAM 550

Already run memtest,no problems.

Thanks.

14 more replies
Answer Match 75.6%

Hi so this is a fresh install of Windows 7 Ultimate x64 and today I was just browsing in Firefox when I got a BSOD. I am thinking the problem is my motherboard since I have had a lot of BSOD in the past with this board.

A:Fresh Install BSOD

Hi Casanova89 and Welcome to the Forum.

STOP 0x0000004E: PFN_LIST_CORRUPT
Usual causes: Device driver, ?memory

Your latest dump file indicates memory corruption as the probable cause which usually indicates out of date Drivers or Bad Memory.
Old and incompatible drivers can and do cause issues with Windows 7, often giving false error codes.

As a Priority:

ASACPI.sys Mon Mar 28 03:30:36 2005 This driver is notorious for causing BSOD's. There is an update here: Asus ATK0110 driver. Look under the sub-heading: Utilities. Approx. 12th one down.

Driver Install - Manual method
Download the driver and extract it to a folder
Open the Device Manager
Right click the device you wish to change the drivers for. You can select Properties > Driver > Driver Details to check you have the right device.
Choose Update Driver Software.
Select Browse My Computer For Driver Software.
Select Let me pick from a list of device drivers on my computer.
Select Have disk...
Select Browse..
Navigate to the extracted folder and double click on the .inf file
Hit OK, then Next and the driver(s) will then begin to install.
Bugcheck Analysis:
Code:
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`02c03000 PsLoadedModuleList = 0xfffff800`02e48e90
Debug session time: Mon Apr 18 22:10:32.610 2011 (UTC + 1:... Read more

4 more replies
Answer Match 74.76%

here is my setup:
P4 2.26
Asus p4p800se
1gig Elixir 3200 ddr
Radeon 9600 xt
Seagate Barracuda 160gig HD
onboard sound and nic

just installed xp sp1 and nothing else yet and i get this BSOD:

PAGE_FAULT_IN_NONPAGED_AREA

STOP: 0X00000050 ( 0X95CB91D4, 0X00000001, 0X8057464C, 0X00000000)

any advice?

also, sometimes i dont get any error at all until i install sp2, then i get:

MACHINE_CHECK_EXCEPTION

STOP: 0X0000009c

pls help!!! :dead:
 

A:BSOD after format and fresh install of xp sp1

bump ^
 

3 more replies
Answer Match 74.76%

I installed new memory (from 4Gb to 8Gb) of DDR2 and then after about a day started getting blue screen errors. However running MemTest said that my memory was fine. According to the Motherboard manual it should be fine. I know my C drive had issues so when my computer died (could not boot it .. video on the screen looked messed up) it turns out my video card failed. My friend who works on my computer decided that it must have been the front fan stopped and the video card over heated. Only speculation as we have not been able to nail down the issue(s). He also took out my pata optical drive because he felt it was causing slow downs on the computer. He also redid my  other HDD and installed Windows all over on that one and set my 1Tb C drive as E now. So now Windows 7 boots off the 320Gb drive I have and the 1Tb is as the 2nd drive with all my Windows files still on there so I can take my time going through the files to decide what to delete and what to keep.
 
Now I have gotten 2 Blue screens so far since I got the computer back yesterday ...
 
Here is the latest ones:
 
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001a (0x0000000000041201, 0xfffff6800017ff98, 0xc45000017f05d867, 0xfffffa8006be0c10).
 
My friend wants me to do a check disk on my external drive because he is now saying maybe that is it because he said the computer never blue screened at his place when he had it over night but he didn't have my external drive with... Read more

More replies
Answer Match 74.76%

Recently purchased a new computer and it was working fine until my first restart. After this it wouldn't start up at all and kept restarting automatically. I ran a fresh install of Vista but the problem persisted. Today the motherbaord was replaced but the problem persists still. I came across this site by searching the BSOD error in google and have followed some steps in another thread which has a problem similar to mine.

Deckard's System Scanner v20071014.68
Run by Bain on 2008-06-30 20:50:53
Computer is in Safe Mode with Networking.
--------------------------------------------------------------------------------

-- Last 5 Restore Point(s) --
34: 2008-06-30 16:24:56 UTC - RP43 - Installed Windows Sidebar Styler
33: 2008-06-30 15:02:50 UTC - RP42 - Installed Logitech GamePanel Software 2.02.
32: 2008-06-30 10:24:13 UTC - RP41 - Windows Update
31: 2008-06-30 10:13:43 UTC - RP40 - Installed Windows Live
30: 2008-06-30 10:13:01 UTC - RP39 - Installed Windows Live installer


-- First Restore Point --
1: 2008-06-20 14:44:36 UTC - RP6 - Installed Dell Resource CD.


Backed up registry hives.
Performed disk cleanup.



-- HijackThis (run as Bain.exe) ------------------------------------------------

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 20:54:13, on 30/06/2008
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18000)
Boot mode: Safe mode with network support

Running processes:
C:\Windows\Expl... Read more

More replies
Answer Match 74.76%

Hi there,

I have build my own system in June 2011 and since the start I am experiencing random BSOD's. I usually get a lot playing World of Warcraft. But also just browsing, watching a video or even when the PC is idle.
I did a fresh install of W7 about 2 weeks ago, unfortunately this didn't solve the problem.

Included are the requested files.

Thanks in advance!

A:Random BSOD's even after fresh install

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [K:\BSODDmpFiles\Joortje\Windows_NT6_BSOD_jcgriff2\012512-10951-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03209000 PsLoadedModuleList = 0xfffff800`0344e670
Debug session time: Wed Jan 25 06:42:00.038 2012 (GMT-7)
System Uptime: 0 days 0:20:42.787
Loading Kernel Symbols
...............................................................
................................................................
............................................
Loading User Symbols
Loading unloaded module list
..........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging informatio... Read more

3 more replies
Answer Match 74.76%

I send post yesterday but nobody answer. Somebody has similar problem before some time but I don't know how problem completed.

For me BSOD only when try to shut down or restart comp.

BSOD Code: 3b
Caused by Driver: dxgkrnl.sys
Caused by Adress: dxgkrnl.sys+2756

After that computer restart, boot and I shut down normal. I can turn on and again normal restart/shut down. Always after playing game and when immediately try to shut down or computer in idle sometimes and I install some program than software want restart and i see BSOD. For now 5 BSOD for one week.

A:BSOD Code:3B Before and After fresh OS Install

The information you provided is a little ambiguous. Please follow the http://www.sevenforums.com/crashes-d...tructions.html to provide us with additional information about your system so we may better help you.

The driver you mention is part of DirectX. Follow the steps for Diagnosing basic problems with DirectX. To re-install your display card drivers as outlined in the DirectX link, use the following steps.
Download the latest drivers for your display card(s)
Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Expand Display adapters
Do the following for each adapter (in case you have multiple display cards)Right click the adapter
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK

Restart your computer after uninstalling drivers for all display cards
Install the latest driver for the display cards once Windows starts

Alternatively:Login as an adminstrative user
Download the latest drivers for your display card(s)
Click Start Menu
Click Control Panel
Click Hardware and Sound
Click Device Manager (the last link under Devices and Printers)
Expand Display adapters
Do the following for each adapter (in case you have multiple display cards)Right click the adapter
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in D... Read more

9 more replies
Answer Match 74.76%

Two weeks ago I did a fresh install thanks to some malware I got. Last night I woke up at 1130pm to see my PC shut down. When I rebooted the BSOD came up then shut down again. Since then I rtebooted without any problems. Here's the zip file.

A:BSOD - Two weeks after fresh install

try seeing if this helps ya out any:

Blue Screen iastor.sys, STOP; 0x0000008E (0xC0000005, - Microsoft Community

1 more replies
Answer Match 74.76%

I keep getting the 0xA BSOD on my new reinstall of Windows 7 Home Premium x64 (had to reinstall due to motherboard failure - tested all components on another system and they were fine).

Installed WIndows, motherboard, GPU and wireless drivers, and it was fine. Today, amongst things such as iTunes, Skype, 7zip and Steam, I've installed some drivers for my USR 9630 skype phone and Soluto. As soon as the Soluto installer started downloading files, the first BSOD hit. 0xA, BlueScreenView cannot determine the cause. Rebooted, tried to replicate the issue and Soluto installed perfectly. About 10 minutes later, I was on Chrome and the second BSOD happened.

I had problems with the latest version of the wireless card drivers before on my old install (BSODs when opening San Andreas Multi-Player), so I decided to roll back to the ones I had on CD. This worked for longer, 20 minutes or so, and I was watching a video and the third blue screen occurred (slightly different to the first 2). I'm about to uninstall the Skype phone and Soluto to see if that fixes it. Dumps are attached for all 3, if anyone could point me in the right direction it would be appreciated. I am in a rush to fix this as I need my PC for my studies. I did check the Event Viewer and there was a 0xc0000005 error with svchost.exe about a second before all records stopped (on the third BSOD) but couldn't find anything on the internet.

Specs: Phenom II X4 955 BE at stock
Asus M5A97 R2.0
8GB RAM (a 4GB ... Read more

A:BSOD on fresh install of Win7 x64

Disregard this I think - 59000 faults on one of the Corsair modules in Memtest
 

2 more replies
Answer Match 74.76%

I have had windows 7 installed now for 2 weeks i did have it installed before but i installed a new HDD as my main drive.

It has happened a few times now but i have only saved 2 dumps which are attached. I am currently using Windows 7 Pro 64bit which i got from the msdnaa through my University.


I don't really fancy reinstalling windows again but if i have to then i will but if there are work arounds that would be great!

The main errors are: ntoskrnl.exe, Wdf01000.sys, PSHED.dll

A:BSOD - After a fresh install of windows!

Welcome!

Let's go through our generic tips. If you're overclocking, stop. Disconnect all unnecessary hardware, like external USB drives, video cards, etc.

Try a memory test. Download Memtest86 and burn the ISO to a CD using ImgBurn. Boot from the CD, and run at least 5 passes.

Also, try scanning your system files. Open an elevated command prompt and run sfc /scannow.

Good luck!
~JK


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Jonathan\Desktop\021110-19016-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a63000 PsLoadedModuleList = 0xfffff800`02ca0e50
Debug session time: Thu Feb 11 08:35:07.143 2010 (GMT-5)
System Uptime: 0 days 6:03:53.312
Loading Kernel Symbols
...............................................................
................................................................
.........................
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* ... Read more

2 more replies
Answer Match 74.76%

I have had this computer about a month now, and recently It blue screens, sometimes when gaming, sometimes doing nothing.

Problem signature
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Here is the message it gave me

Extra information about the problem
BCCode: f4
BCP1: 0000000000000003
BCP2: FFFFFA8008F03B30
BCP3: FFFFFA8008F03E10
BCP4: FFFFF80003591660
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Bucket ID: X64_0xF4_IOERR_c000000e_IMAGE_hardware_disk
Server information: c49d1498-37ac-41b3-b341-5efc335a9fe1


I don't know what is causing it.

Here is my system info

_____________________________________________

? CPU:

Manufacturer: GenuineIntel
Description: Intel64 Family 6 Model 42 Stepping 7
Name: Intel(R) Core(TM) i5-2320 CPU @ 3.00GHz
Speed: 2993
_____________________________________________

? Installed RAM: 8174 MB

_____________________________________________

? PC Info.:

PC or motherboard model: To Be Filled By O.E.M.
System name: RALGONDO-PC
System Manufacturer: To Be Filled By O.E.M.

_____________________________________________

? Onboard devices:


_____________________________________________

? Graphics:

Description: AMD Radeon HD 6670
Name: AMD Radeon HD 6670
RAM: MB
Driver Date: 20120405000000.000000-000
Driver Version: 8.961.0.0

_____________________________________________

? CD/DVD drives:

Description: CD-ROM Drive
Caption: ATAPI iHAS124 C ATA Device
Manufacturer: (Standard CD-RO... Read more

A:BSOD Before and after fresh windows install

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

8 more replies
Answer Match 74.76%

? OS - Windows 7
? x64
? system is 1 year old
? OS was installed today
? CPU is AMD Phenom II X4 925 (3.6ghz)
? Video Card is ati radeon 4890
? MotherBoard is gigabyte amd ultra durable 3
? 500w OCZ

hey yall,

i dont know an awful lot about computers, my friend built and installed 7 on this one for me, i'd just like it to work without bsods so i can enjoy it before i have to leave again. i appreciate all yall replies and will check back here in a week or so since yall seem mighty busy. peace and take care.

steve

A:BSOD on fresh win7 x64 install

bump as this has fallen to page 3, really appreciate your time guys, ty.

2 more replies
Answer Match 74.76%

? OS - Windows 7 Ultimate 64-Bit
? Original OS - Windows 7 Home Premium x64
? Purchased OS from retailer
? Age of System - 3 Years
? Age of OS installation - Reinstalled just 4 days ago

? CPU - i7-2630QM @ 2.00 GHz
? Video Card - nVidia GTX 460M
? MotherBoard - Asus G73SW Intel Laptop Motherboard s989 (0205A) 60-N3IMB1000-C08 69N0K9M10C08
? Power Supply - ASUS 19.5V 7.7A 150W POWER SUPPLY/ AC ADAPTER
? System Manufacturer - Asus

Happy New Years everyone! I hope everyone had a great year. I purchased this laptop I'm using (Asus G73SW) from a friend earlier this year and it has been more trouble than it's worth. Hopefully I followed all of the guidelines for the post. I included the PERFMON report, the BSOD Collection .html file, and a BlueScreenView document as well. Thanks for any help or suggestions you give me!

More replies
Answer Match 74.76%

oh someone PLEASE help me with my BSODs...
i fresh installed W7 3 times now thinking i solved my issues.

i finally cought a BSOD in progress and got a driver power state failure.
but it may not be for all my improper shutdown messages.
Is there anyway you can help me if i upload my minidumps?

please im desperate....

thank you...

A:BSOD, fresh install W7 64bit

  
Quote: Originally Posted by loueber


oh someone PLEASE help me with my BSODs...
i fresh installed W7 3 times now thinking i solved my issues.

i finally cought a BSOD in progress and got a driver power state failure.
but it may not be for all my improper shutdown messages.
Is there anyway you can help me if i upload my minidumps?

please im desperate....

thank you...



Hi loueber & welcome to our Forum,
There are quite a few capable & helpful people here who would be able to analyse your minidumps.

Refer to the links below to assist you.

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/tutorials...en-forums.html

1 more replies
Answer Match 74.76%

OK. attached is the zip files.
thank you in advance for helping.. this is such a pain.
blue screens when going into hibernate, or just sitting.
also blue screens going into stand by.

x64 bit W7 Ultimate
retail version
Hardware is only 2 months old
OS install 1 week ago, blue screens from day 1
all drivers are up to date by manufacturs.
1 device intentionaly disabled in device manager due to freeze problems ( ati tv tuner)
amd hex core 3.2
Gigabyte ga 890gpa ud3h
4 gigs ram
liquid cooled
1200 watt psu
thank you

A:BSOD, fresh install W7 64bit

  
Quote: Originally Posted by loueber


OK. attached is the zip files.
thank you in advance for helping.. this is such a pain.
blue screens when going into hibernate, or just sitting.
also blue screens going into stand by.

x64 bit W7 Ultimate
retail version
Hardware is only 2 months old
OS install 1 week ago, blue screens from day 1
all drivers are up to date by manufacturs.
1 device intentionaly disabled in device manager due to freeze problems ( ati tv tuner)
amd hex core 3.2
Gigabyte ga 890gpa ud3h
4 gigs ram
liquid cooled
1200 watt psu
thank you



So far you have several causes of the BSOD's. First your Rt64win7.sys driver (your realtek driver) and your vsmraid.sys (the via raid driver for amd).

You need to re-install them as well as all the following drivers.


Code:
GVTDrv64.sys fffff880`095e7000 fffff880`095f1000 0x0000a000 0x44fd22ca 9/5/2006 03:10:02
gdrv.sys fffff880`099f4000 fffff880`099fd000 0x00009000 0x49b9d175 3/12/2009 23:22:29
spldr.sys fffff880`01410000 fffff880`01418000 0x00008000 0x4a0858bb 5/11/2009 12:56:27
After that if you keep having BSOD's we can narrow the focus.

Ken J

DMP

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\100310-18267-01.dmp]
Mini Kern... Read more

2 more replies
Answer Match 74.76%

So I know there a few other people have the same issue but I think mine might be different. I'm currently running in Safe Mode right now because I can't sit on standard boot too long before I have a random BSOD. It's completely random and very annoying, I need help as soon as I can get it. I'll be back with my minidump file shortly, in the mean time here are my specs:

CPU: Intel i5 2300
PSU:diablotek 600W
Memory: PNY Optima PC3-10666 2x4GB
GPU: Geforce 550 Ti
Mobo: GIGABYTE Z68AP-D3
Soundcard: none
Case: Custom
PS. I thought maybe this was an install issue so I reinstalled win7 x64 again without downloading any updates and its still giving me grief.

A:BSOD after fresh install of win 7 ultimate x64

As soon as we have the dump, we can assist you

9 more replies
Answer Match 74.76%

Hi guys,
I decided to reinstall Windows 7 due to random BSODs since I experienced random BSODs, usually once a day. I was full of hope, but unfortunately BSODs happened again twice. Also some apps have random crashes. Chrome, Photoshop and Lightroom are opened all the time and BSODs appears randomly when working in these apps (even if I don't use PC). It's very important to fix it, because sometimes I lose arduous work in Photoshop Thanks in advance for any help

More replies
Answer Match 74.76%

Hi all,

I recently downgraded from Windows 10 due to constant BSOD's (was initially upgraded from windows 8.1).

I successfully performed a clean install this morning but have already encountered three BSODs,

I have a feeling that it might be my origin software but I'm not sure

Regards

Matt

A:BSOD - Fresh windows 8.1 install

Hi mattblue,

Welcome to the 8forums.

As you get a 0x1a(memory_management), 0xA(IRQL_NOT_LESS_OR_EQUAL) pointing to hardware and 0x139(KERNEL_SECURITY_CHECK_FAILURE) caused by GPU drivers, please run a few tests.



Diagnostic test

GPU TEST

Run Furmark to test your GPU. Furmark tutorial


   Note
Run Furmark for around 30 minutes

   Warning
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high



Diagnostic Test

RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums


   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

3 more replies
Answer Match 74.76%

Hi

I am getting a BSOD on a fresh install of Windows 7. No updates or software have been installed.

I have attached the mini dump files.

Many Thanks

A:NTFS.SYS BSOD on fresh install

Hiya and welcome to SevenForums!

Code:
BugCheck 24, {1904fb, fffff88001fea298, fffff88001fe9af0, fffff880012dfc7a}

Probably caused by : Ntfs.sys ( Ntfs!NtfsContinueIndexEnumeration+2ba )
Run SeaTools(DO NOT RUN FOR SSDS) SeaTools for DOS and Windows - How to Use

5 more replies
Answer Match 74.76%

Hello, I have recently got a new processor, motherboard, ram, cooler and hard drive. I have installed all of them and installed a fresh new Windows 7 install on it. I have since installed all my basic drivers; motherboard, graphics card, network adapter etc but I have gone away from my PC and when I've come back I am greeted with the message "Windows has recovered from an unexpected shut down" so it's not something that I'm doing that's causing it. I am presuming it's something to do with my hardware.

Any help would be greatly appreciated, thanks

A:BSOD on fresh new install, unknown cause

Hello and welcome John now before we start on the dump files which are mentioning something about Genuine Intel could you let us know what Windows media did you use on the new motherboard because if it was an OEM for the old mobo without Microsoft's ok you cannot use it on a new board. If the media is retail then no problems.

There is just one other little thing you have a problem device listed in msinfo32 see pic might be an idea to get that driver installed.

9 more replies
Answer Match 74.76%

Hi,

I have been getting bsod for a while now and on a bit of research tried memtest86 and had errors on test 13 (corsair vengeance 8gb 2 X 4gb) so I went and got some new ram (corsair vengeance pro 16gb 2 X 8gb) and at the same time a new ssd for a fresh install of win 7
so fresh install of win 7 (with old ide not connected) on new ssd and new ram and also within the last month a new 700w power supply and a new gtx 960 video card and im still getting random bsod
any help would be much appreciated
Thanks

A:Still getting BSOD after fresh install of win7 on new ssd with new ram

While waiting for someone to comment on BSODs..

3tb ide? You sure it is not a SATA drive in ide mode?(set in BIOS)
Download and run AS SSD (no need to run the benchmark). Take a screenshot and post here please

8 more replies
Answer Match 74.76%

Hey guys,
I built my PC from all new parts about 3-4 months ago, but from the get go it would intermittently blue screen, it settled down a month or two later but not sure why. Two days ago I wiped and formatted my drive and did a clean install of 7 as I was having unrelated issues I couldn't resolve. But now the blue screens are back. I thought it might be mobo driver issues but I finished updating the drivers and it's still happening.
System specs:
Windows 7 Professional 64x
Gigabyte ga-870fxa-ud5
AMD Phenom x6
AMD Radeon HD6870 1gb
two 4g G-Skill Ripjaw f3-12800cl9d-8gbxl RAM

Attached is the minidump and health report.
Thanks for any help!

A:BSOD on fresh install Windows 7

> Your crash was related to AODDriver2.sys AMD OverDrive Service Driver from Advanced Micro Devices.
Remove > at least to test.

> Please run the update readiness tool and then update to SP-1

Ensure you install the correct 64 or 32 bit option for your system)
Download the System Update Readiness Tool (64bit)
Download the System Update Readiness Tool (32bit)

Now update to SP-1

Learn how to install Windows 7 Service Pack 1 (SP1)

> I suggest you download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.

Malwarebytes : Download free malware, virus and spyware tools to get your computer back in shape!

9 more replies
Answer Match 74.76%

I have been experiencing a BSOD on my fresh install of windows 7. I ran the upgrade adviser before upgrading and it said my hardware was 100% compatible. Here is the info:
-32bit windows 7 pro
-The original OS was XP home
-Retail version of 7 pro
-2.5 years since the date of purchase today at 6:05 PM
-I installed 7 a week ago
-It is a windows 7 and Ubuntu dual boot.

Here is the crash message text:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: a
BCP1: 10000000
BCP2: 00000002
BCP3: 00000001
BCP4: 81897400
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\090711-61791-01.dmp
C:\Users\Jack\AppData\Local\Temp\WER-78905-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

And .zip is attached.

A:BSOD Fresh install of windows 7 pro

I would test you ram and cpu:


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Administrator\Downloads\BSOD stuff\Windows_NT6_BSOD_jcgriff2\090111-39343-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.x86fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0x8184d000 PsLoadedModuleList = 0x81997850
Debug session time: Thu Sep 1 18:12:12.608 2011 (UTC - 6:00)
System Uptime: 0 days 0:01:58.201
Loading Kernel Symbols
...............................................................
................................................................
................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {1000... Read more

8 more replies
Answer Match 74.76%

I am getting plagued by BSoDs on a fresh (installed yesterday) install of windows 7 pro 64-bit.

This is the second time that windows 7 was installed on this system. The first was also plagued by BSoDs

any help would be greatly appreciated



Is Windows 7 . . .
- x86 (32-bit) or x64 ? 64 bit
- the original installed OS on the system? Custom built system
- an OEM or full retail version? retail version obtained from college IT dept
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? pretty new, built the system in march
- What is the age of OS installation (have you re-installed the OS?) installed OS on 4/17/12




Custom built system

Operating System
MS Windows 7 64-bit SP1

CPU
AMD Phenom II X4 960T 28 ?C
Thuban 45nm Technology

RAM
CORSAIR Vengeance CMZ8GX3M2A1600C9B
8.00 GB Dual-Channel DDR3 @ 899MHz (9-12-12-30)

Motherboard
MSI 970A-G45 (MS-7693) (CPU 1) 36 ?C

Graphics
M220VA ([email protected])
1024MB GeForce GTX 550 Ti (EVGA) 38 ?C

Hard Drives
488GB Seagate ST3500320AS ATA Device (SATA) 26 ?C
488GB Seagate ST3500630AS ATA Device (SATA) 32 ?C

Optical Drives
ASUS BC-12B1ST ATA Device

A:BSOD on a fresh install (win7 pro 64 bit)

These crashes were caused by memory corruption/exception (Cx05) probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+


Driver Verifer






Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore po... Read more

1 more replies
Answer Match 74.76%

Been getting this BSOD randomly. Thought was the vga card as computer would not wake up the next morning after being on all night. And computer would not POST once, only worked when took out vga card and used onboard video. I've since purchased and installed a new vga card. And reinstalled windows 7. But just got 2 BSOD today. So seeking some help here.

Attached SF Diagnostic Tool Logs

A:BSOD even after fresh install of Win7

Hello Subby,

I am not an expert on reading dump files.
But as reading your post, i am thinking it is the problem of your PSU. Maybe your PSU is not compatible with your Graphics card.
Can you post your system specs?

3 more replies
Answer Match 74.76%

HI All,

For more than a year now I have reocuring blues screen of death.
Here is what i did:

Checked memory sticks, I have 2*2 GB >> memory diagnostics everything is fine. Swithched sticks to diferent slots. >> no use

Reinsatlled full system. >> no use

Daemon tools are uninstalled after which I experience less BSOD but still occures. Previously ever day now every 3-4 days.

recently my previous HDD went bust, now I have a new one still issues.

System checks run fine and usually when windows would load up system crashes.

I am really annoyed as I think I have tried a lot of possibilities. Usually it is ntoskrnl.exe or cdd.dll that crash or when they start loading according to bluescreen viewer.

Pagefault in non paged area, boot sector errors are the 2 main reasons usually.

PLease see all minidum dump files and system info attached.

Could you please analyse and tell what youthink. Is it HDD? I am beginning to think that it is the mother board that cannot handle thinkgs correctly...

Thank you very much in advance

A:BSOD reoccurs even after fresh install

Only one DMP file was upload if you have more please upload them so we can spot trends.

Lets eliminate the OS by running a system file check.

SFC /SCANNOW Command - System File Checker

How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
There are obviously 2 possibiliteis Software, and hardware. The fact that the re-install yieded the same problem seems to point to hardware but we need to run a few tests.

First what memory test did you use (memtest is best, the built in is useless) and for how many passes.

Ram is the most probable hardware, followed by HD, cpu, etc
To test the drivers (software) we need you to run driver verifier
Of note ::::: You might want to update to SP-1 as it eliminates many software issues in the original release


Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test... Read more

5 more replies
Answer Match 74.76%

Hi
i'm french, i will try my best to explain.
Sorry but i can't title more precisely due to the circumstance.

Actually
I just reinstalled windows 7 ultimate x64 2hours ago (+ format by the disc too) and i had my first "new" bluescreen like 10mn after installed amd driver (last one, 14.9 from 9/29/2014), happened just when i logged into steam. (Windows wasn't already setup to maintain the bsod screen at this point, now its done..)


Before (maybe the new windows solve some, but just in case.. it can maybe also help) :
I reinstalled it cause i had random bluescreen with some .sys or .dll (atikvmag) which tend to be with the graphic card / system corrupt, some cleaner stuff said me i had a bitcoin stuff which can destroy some vital windows fonctions. Sometimes i had 4 bsod in the evening like no one, doing the "same thing" youtube & games for most (not so much differents games), i don't even remember having it while idle desktop or if i was idle there was something running (youtube player for example).

Other quick example, i used to crashed while having a lot of tabs with some youtube players (yep i use a lot) so after reboot, chrome says me "restore them ?" i say "do it baby!" which could result in a bsod.

I also can be freeze, well i guess, cause my usb stops, no mouse / keyboard, i haven't check sound.
Or, an application crashed, i hit ctrl + alt + sup and, all the time in this case it freeze the computer when i cli... Read more

A:BSOD again after fresh new install windows 7

New one, i was starting a youtube video so my "Before" problems are still there

I missed i vital thing on my first zipfile, my windows 7 wasn't in sp1, trully sorry for that supid miss.. i though it was already done humm.

9 more replies
Answer Match 74.76%

I really need help here guys, im out of ideas. About a week ago my computer started getting BSOD randomly while gaming or browsing the web. I thought it was a failing HDD so I re installed windows onto a new one after running stress tests on it to make sure it was good. I have run stress tests on everything and watched temperatures. Windows is up to date. Swapped new ram sticks to make sure memory was OK. Everything seems to check out, but i still get these errors. This is what is in the dump file. If anyone has any ideas i would greatly appreciate it.


Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argumen... Read more

A:BSOD after fresh install, ntoskrnl.exe

  
Quote: Originally Posted by Marcin


I really need help here guys, im out of ideas. About a week ago my computer started getting BSOD randomly while gaming or browsing the web. I thought it was a failing HDD so I re installed windows onto a new one after running stress tests on it to make sure it was good. I have run stress tests on everything and watched temperatures. Windows is up to date. Swapped new ram sticks to make sure memory was OK. Everything seems to check out, but i still get these errors. This is what is in the dump file. If anyone has any ideas i would greatly appreciate it.
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. ... Read more

2 more replies
Answer Match 74.76%

Hello, my computer is about 2 years old. It first came with Windows vista 64. A few months ago I got a hold of a copy of windows 7 pro 32, so I wanted to check it out, even If I was going to take a hit on ram. Well now I have Windows 7 Ultimate 64, but after doing a fresh install I kept getting BSOD after the windows logo. I was able to complete the setup after removing all my ram except for one stick. The same problem persists after setup. I can boot up in safe mode just fine with all of my ram.

System Specs:
Operating System: Debug Windows 7 Ultimate 64-bit (6.1, Build 7601)
System Manufacturer: Gateway
System Model: LX6810-01
BIOS: Default System BIOS
Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (4 CPUs), ~2.3GHz
Memory: 8192MB RAM

A:BSOD on start up after fresh install.

Please update all drivers for your system from the system's support site: http://support.gateway.com/us/en/pro...1&modelId=2308. The following drivers are pre-Windows 7 and may cause problems with Windows running properly. Especially recommend updating your RAID driver and chipset drivers. For the chipset and all Intel drivers, use the Intel? Driver Update Utility. All other drivers may be found via the links below.


Code:
iirsp fffff880`01765000 fffff880`0177b000 Tue Dec 13 14:47:51 2005 (439f4187) 00016077 iirsp.sys
nfrd960 fffff880`01998000 fffff880`019a9000 Tue Jun 06 15:11:40 2006 (4485ef8c) 000155bf nfrd960.sys
adpu320 fffff880`01457000 fffff880`0148a000 Tue Feb 27 17:06:46 2007 (45e4c796) 00031a1a adpu320.sys
adpahci fffff880`01400000 fffff880`01457000 Tue May 01 11:30:28 2007 (46377934) 00062290 adpahci.sys
arc fffff880`01665000 fffff880`0167e000 Thu May 24 15:28:53 2007 (46560395) 0001f41c arc.sys
SiSRaid2 fffff880`01a71000 fffff880`01a82000 Wed Sep 24 12:28:22 2008 (48da86c6) 0001b522 SiSRaid2.sys
sisraid4 fffff880`01a82000 fffff880`01a9c000 Wed Oct 01 15:56:02 2008 (48e3f1f2) 0001f11e sisraid4.sys
nvm62x64 fffff880`052a1000 fffff880`05304d80 Fri Oct 17 15:01:06 2008 (48f8fd12) 0006f977 nvm62x64.sys
adp94xx fffff880`0154e000 fffff880`015c9000 Fri Dec 05 16:48:25 2008 (4939bdc9) 0007d792 adp94xx.sys
lsi_fc fffff880`0177b000 fffff880`0179c000 Tue Dec 09 15:39:03 2008 (493ef387) 0002d119 lsi_fc.sys
arcsas fffff880`0167e000 fffff880`01699000 ... Read more

1 more replies
Answer Match 74.76%

Hello everyone,

New member to the forums here and I was able to be pretty ninja-like when it came to getting information required to make a post in this forum.

Bought a new computer 2 weeks ago, came in 3 days ago. Been having trouble with it since. Usually I'm the "Mr. Fix-it" when it comes to PC's but I've never messed around with any debugging tools, so I need some assistance please; any help is greatly appreciated.

I've tried all the troubleshooting you can possibly do when trying to diagnose a blue screen of death. Tried both RAM sticks separately, took the video card out and used on-board video. I even tried both RAM sticks with on-board video separately. Unplugged the DVD-ROM, no avail. I called ASRock and got a technician who I could barely understand, but was telling me something about "XMP". I didn't see the XMP option under the DRAM configuration, even if my sticks don't support it wouldn't the option still be there? I think he has my motherboard confused with another one. He told me to either replace the RAM with new RAM or send the motherboard back in and exchange it.

I came here to see what the BSoD DMP files REALLY have to say the problem is, so I can solve it once and for all. I didn't pay for new hardware to let it sit here and collect dust.

I appreciate any help you guys can offer.

SPECS: Nothing is OC'd except the GPU, it was OC'd straight from the factory

MOBO: ASRock Z68 Extreme3 Gen3 @ P1.30 (latest BIOS update)
CPU:... Read more

A:BSoD after fresh Windows 7 install

Anyone...?

8 more replies
Answer Match 74.76%

My system currently has a blue screen around twice a day from what seems like a driver issue. I have tried driver verifier, swapped out the GPU since I thought most things pointed to that and did a fresh install. The only thing I have left to do is update my motherboard bios. I am questioning if the GPU was even the issue since I still got a crash... Below is the guide to Driver Verifier I used so you can see what steps I took. I am at my wits end and am not to great at pointing out what driver crashed or whats left to do after the OS install.

Driver Verifier-- tracking down a mis-behaving driver. - Microsoft Community

Thank you for your time and assistance.

A:BSOD While Idle Before and After Fresh Install.

Hi Ferndoh315 & Welcome to the forums ^_^,

I have analyzed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Tue Sep 2 18:09:41.993 2014 (UTC + 5:30)**************************Loading Dump File [C:\SysnativeBSODApps\090214-12140-01.dmp]

Windows 8 Kernel Version 9600 MP (4 procs) Free x64

Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035

System Uptime: 0 days 19:32:21.661

Probably caused by : tcpip.sys ( tcpip!IppReceiveHeaderBatch+16b )

BugCheck 1E, {ffffffffc000001d, fffff8017c2ad8fb, fffff80375756a00, 2}
BugCheck Info: KMODE_EXCEPTION_NOT_HANDLED (1e)

Arguments:
Arg1: ffffffffc000001d, The exception code that was not handled
Arg2: fffff8017c2ad8fb, The address that the exception occurred at
Arg3: fffff80375756a00, Parameter 0 of the exception
Arg4: 0000000000000002, Parameter 1 of the exception
BUGCHECK_STR: 0x1E_c000001d

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x1E_c000001d_BAD_IP_tcpip!IppReceiveHeaderBatch

CPUID: "Intel(R) Core(TM) i5-4670K CPU @ 3.40GHz"

MaxSpeed: 3400

CurrentSpeed: 3400

BIOS Version V1.2

BIOS Release Date 05/17/2013

Manufacturer MSI

Product Name MS-7821

??????????????????????????????????????????????????????????????????????????????????????``
**************************Mon Sep 1 05:08:28.833 2014 (UTC + 5:30)**************************
Loa... Read more

10 more replies
Answer Match 74.76%

Hi All,

I have this one PC that i have not been able to keep stable. I have installed windows 7 as a fresh new install multiple times now. I have been getting BSOD of different types and i have no idea what the issue is.

I have looked around and seen that 0x00000124 is Hardware and is not a very helpful error code. I have ran Dell hardware diagnostics on a loop and no errors have been found. I have also ran Burn in test for 45 mins and it has passed that also.

The BSOD don't seem to happen when anything major is running e.g burn in test. If im just idle on a website for couple of mins and do a quick mouse movement to click the start button or any minimized windows thats when it seems to BSOD.

I am also getting windows update issues with updates failing to install - this includes Windows 7 SP1.

If anything else is required please let me know and i will do my best to provide it.

Is Windows 7 . . .
- x86 (32-bit) or x64 ? x86
- the original installed OS on the system? No
- an OEM or full retail version? OEM - But not pre installed on system

- What is the age of system (hardware)? Dell XPS 720 H2C
- What is the age of OS installation (have you re-installed the OS?) Fresh install

Kind Regards,
Dan

A:Fresh install new problems BSOD

After typing out and posting my above post i clicked the start button and my system BSOD again.

I have uploaded a new BSOD dump.

1 more replies
Answer Match 74.76%

Hi All

I have just installed a fresh Windows 10 Pro on my desktop. Whenever I connect my Ethernet (connect to internet) around 30 seconds later get the BSOD - System_Service_Exception (ks.sys).

I have performed a system restore and startup repair but keep getting the same problem. I'm guessing that windows is updating drivers and system updates in the background and causing this issue.

UPDATE- I have tried disabling update in group policies and disabling auto update drivers in advanced options....still same problem after 2 mins!

Attached is my logs.
What am I meant to do to resolve this?

A:BSOD - System_Service_Exception (ks.sys) on fresh install

Troubleshooting a counterfeit installation is useless as it is not known what has been modified to your system.
A counterfeit installation contains heavily modified code which causes the system to behave in unexpected ways.
For this reason, analyzing counterfeit systems is unreliable and most analysts won't try it.
I recommend to install a genuine copy of Windows.
If, after you have installed a genuine copy of Windows, you still get BSOD's we'll be happy to assist you.

Code:
<ActivePartialProductKey>T83GX</ActivePartialProductKey>
<ActiveProductKeyPid2>00331-10000-00001-AA261</ActiveProductKeyPid2>
<OSVersion>10.0.10586.2.00010100.0.0.048</OSVersion>
<ProductName>Windows 10 Pro</ProductName>
<ProcessorArchitecture>x64</ProcessorArchitecture>
<EditionId>Professional</EditionId>
<BuildLab>10586.th2_release.160104-1513</BuildLab>
<TimeZone>GMT Standard Time(GMT)</TimeZone>
<ActiveSkuId>2de67392-b7a7-462a-b1ca-108dd189f588</ActiveSkuId>
<ActiveSkuDescription>Windows(R) Operating System, VOLUME_KMSCLIENT channel</ActiveSkuDescription>
<ProductUniquenessGroups>55c92734-d682-4d71-983e-d6ec3f16059f</ProductUniquenessGroups>
<ActiveProductKeyPKeyId>08e404fb-41f3-77ac-59ef-6e9f2d3f499d</ActiveProductKeyPKeyId>
<ActiveProductKeyPidEx>03612-03311-000-000001-03-2057-10586.0000-0262016</ActiveProductKeyPidEx&... Read more

0 more replies