Tech Problem Aggregator

Satellite C does not connect to TV using HDMI

Q: Satellite C does not connect to TV using HDMI

Until 2 wks ago was able to connect laptop to tv with hdmi lead

now laptop does'nt connect laptop shows a connection tv says no signal

I have tried reinstalling drivers

Help

More replies
Answer Match 70.56%

If I use either F4/the windows key + P and select duplicate or PC screen only (or any other option) and then plug it into the TV, both the laptop screen and the TV screen are blank. Pressing any key does not bring up anything on my laptop screen, then when I unplug the HDMI cable it comes up with the second screen only option highlighted. My laptop strangely ignores what I click and constantly reverts back to this option and alas, I cannot project the screen onto any monitor (I have tried 4 separate monitors).

My laptop previously was able to be plugged into a TV and I have done this numerous times but as far as I'm aware this stopped when I had a windows 8.1 update (my assumption, I'm not sure). I have searched the web for solutions and none have worked. I have tried the method of detecting the monitor via the screen resolution option on the desktop, but again this can't be done because I can't see anything on either screen when my laptop is plugged into any TV, and I have tried countless times.

Any help is appreciated

Thanks a lot

A:Satellite Pro C850-1K3 cannot connect to a TV via a HDMI cable

I use Toshiba notebooks few years now and what I can say is that you must connect your notebook to the TV at first, enable the right port on the TV and then use FN or F key to change between notebooks desktop and connected TV.
Connected TV or other external device must be detected at first.

Please test it one more time.

1 more replies
Answer Match 55.86%

I have a video card with both a DVI and an HDMI output and a monitor with only an HDMI input. Should I connect my monitor to my PC with an HDMI cable or with a DVI - HDMI cable?

A:Should I use an HDMI or HDMI-DVI cable to connect to my monitor?

Hdmi

4 more replies
Answer Match 53.76%

Hi Everyone,

I'm trying to connect my Toshiba laptop with an HDMI Output to my Phillips 42PFL9532/98 using ATi Catalyst Control Center and I am trying to clone the laptop monitor to be the same on the TV but it comes up on the TV Unsupported Video Format and when I make it a 2nd monitor it works fine.

It would be great if someone could help me out to get it working.

Thanks Sam

A:Trying to connect Laptop via HDMI to HDMI

What it the resolution on your main screen that you want to clone, and what resolution is the TV when you set it up as the second monitor?

3 more replies
Answer Match 52.92%

Hi,

Sounds complicated (To me anyway)

I'm running Windows 7 64bit with 2 video cards (NVIDIA GeForce 8600 GT and NVIDIA GeForce GT 240) as I use 3 monitors.

My TV is located where it is not possible to run a cable to it from the PC, It is however beside a CAT5 box that is connected to a CAT5 box beside my PC.

I use a TP-LINK TL-MR3420 router for my PC and wireless access upstairs.
It is connected to a Belkin Share wireless router set up purely as an access point downstairs via the 2 cat boxes mentioned earlier for wireless access and a wired connection to my xBox.

I want to use one of the spare video card ports to connect to my HDTV
I have a HDMI output on the NVIDIA GeForce 8600 GT and a DVI output on the NVIDIA GeForce GT 240 that are not in use.

I think HDMI is the way to go as I believe I can use a S/PDIF cable to connect my motherboard to my NVIDIA GeForce 8600 GT and so I will have audio as well as visual.

My question is:
Can I use a HDMI to CAT5 converter, connect a HDMI cable to the video card output, connect one end of a CAT5 cable to that, the other end to my TP-LINK TL-MR3420 router (Which is connected to my Belkin Share wireless router)
Take a CAT5 to HDMI converter and run a HDMI cable from my Belkin Share wireless router to my HDTV?
Is it possible to do this via a router at all?

Any help is much appreciated ..
 

A:Connect PC to HDTV via HDMI -> CAT5 -> Router -> Access Point -> CAT5 -> HDMI -> TV

Hi and welcome to TSG.

The HDMI to CAT5 converter most likely sends raw high speed serial video through all four twisted pairs of wires in the CAT5 cable rather than converting the video data to Ethernet compatible data packets. Any Ethernet router or switch would not know what hit it.
 

1 more replies
Answer Match 51.66%

I got a Toshiba P50-C-17F running on Windows 10, with an Intel HD Graphics 520 and Nvidia 950M running alongside it. My TV is a Samsung UE46F5000.
The problem: all my devices display the laptop's screen via HDMI. My smaller TV, my monitors, and with many of my HDMI cables. But no combination results in an image on my main TV, the Samsung.
The error is: Mode Not Supported. Something about a resolution that doesn't match and isn't true. (Because I've tried every combination, from 1024x768 at 60p to just 1920x1080 at 60p, the TV's native mode.)
I'vereinstalled Intel's graphic drivers multiple times, and tried multiple versions. I don't know what to try anymore. I've also tried all the different HDMI ports of my TV, of course.
So, why does my Samsung TV not show an image when hooking up my Toshiba laptop? I can't make sense of it.

PS Different boot procedures have also been tried. TV first. Laptop first. You name it. And it doesn't have something like a PC mode. It even works fine wothy desktop hooked up via HDMI.

More replies
Answer Match 51.66%

Seems a common problem that HDMI doesn't work. How hard can it be?

Machine: R50-B, Windows 10 (upgraded from 8.1), 64-bit.

HDMI no go: when I plug in an HDMI cable (live) the system detects it, shows it has two displays, but nothinb on the second display. Yes, I have tried Windows-P to choose the displays and worked with the dual-monitor settings.

There is no HDMI Manager driver installed. The support site has no Windows 10 drivers, and the 8.1 driver 'HDMI Manager' installer does nothing - it runs but nothing gets installed.

Any suggestions?

More replies
Answer Match 51.24%

Good evening, I bought recently the P-50-C-16R and normally I connect it to my tv or another screen via HDMI, and after connect the secondary display starts flickering. Like there is a loss of connection a starts working again.

Sometimes it flickers several times in a row.

I have the latest drivers of the laptop installed.

Can someone help me?

A:Satellite P50-C-16R Second Screen Problem (HDMI)

Problem solve with board repleacement... Bought a defective computer... One month old and a new board... Damn!!!

1 more replies
Answer Match 51.24%

Hello, my pc is a SATELLITE P50-A-14G, and I'm writing this because when I conect the HDMI to my pc, the audio doesn't work. I've tried almost everything, but it doesn't seem to recognize the HDMI as sound player. Image is good, but sounds keep playing from the speakers of the laptop itself.

I've checked the playback tab on the sound config and it doesn't appear HDMI device to select.

I've also checked on the Device Manager and uninstalled the "IDT High Definition Audio CODEC" wich was automatically updated once reset the laptop, but I didn't appreciated any changes at all. I have also checked if the HDMI output was in disabled, but it doesn't appear at all. I don't know what else to do! Help me, please!

A:HDMI audio is not working on my Satellite P50-A-14G

Originally Posted by valeriiish


I've checked the playback tab on the sound config and it doesn't appear [/COLOR]HDMI device to select.



Hi

Click with right mouse button and enable options “show disabled devices” and “show disconnected devices”.

Is HDMI device shown now?
If your notebook recognized TV the sound device must be detected too.

Do you use original preinstalled OS that you got with your notebook?

4 more replies
Answer Match 51.24%

Hello,

why cant I get [email protected] on HDMI port? Only get 30Hz.

Intel HD P4600: DisplayPort*/HDMI- [email protected] 60Hz, [email protected], VGA

P70-A-126 spec on Toshiba site:
1 ? HDMI?-Ausgang unterst?tzt Ultra HD-Format und 3D-Funktion

Any hints ideas?

Thank you,
bonurb

More replies
Answer Match 51.24%

I just purchased a new S50-B-15N.

When I connect a monitor to the HDMI port its not being detected.

I'm running Win 8.1, but can't find a driver listed nor is there anything showing as missing in device manager.

A:Satellite S50-B-15N - HDMI is not working after Win 8.1 installation

If you use original preinstalled operating system that you got with your machine all necessary drivers are already preinstalled.
I don't know what is wrong there. Be sure that HDMI cable is connected properly and your external display enabled.

Test it please with your TV too. It must work.
I have S50-B-12Q and it works perfectly with my Panasonic TV.

12 more replies
Answer Match 51.24%

Hi fellow toshiba users,

I am having difficulty getting audio when connected over HDMI. Picture is perfect but no sound.
I am not very computer literate but so far with the help of other posts I have downloaded driver updates and gone into control panel clicked manage etc my default option is greyed out can anyone please help

My TV is a Toshiba too if this helps

A:Satellite Pro C50D - No sound over HDMI

Can you please tell us which notebook model and OS do you use?
Do you use original preinstalled operating system that you go with your machine?

8 more replies
Answer Match 51.24%

For the past few years I have used Dell laptops for Karaoke connected to multiple screens via a matrix HDMI 8x8 switcher. I recently bought the satellite L50, tried it out last week connected to the Matrix HDMI switcher but got the following error on the TV Invalid Format. I have connected direct to LG and Sony TV with no problem so the switcher seems to be the problem, can anyone help me or give some advice. Regards Brian

More replies
Answer Match 51.24%

When i connect my laptop P70-A to my LG TV I only get the display but no audio. the HDMI audio does not show neither in the device manager under sound, video and game controller nor in the volume control option. the cable and TV work fine with other laptops.

More replies
Answer Match 50.82%

Hi,

I was using HDMI port actively. However, one day when I connected my laptop to the TV, I noticed that sound was not transferred to TV. I can use TV as a primary or second monitor, data can be transferred and there is no problem but I have to listen the sound from laptop not TV.

More replies
Answer Match 50.82%

Hello,

I know not good english,
I have a problem with laptop Satellite P70-A-104 PSPLPE.

After clean install Windows 8.1 Pro, installing all drivers for the site but I have no sound on TV through HDMI
http://oi61.tinypic.com/34i35fl.jpg

A:Satellite P70-A-104 - No sound using HDMI out after clean install

please help me ?

14 more replies
Answer Match 50.82%

I have Tosiba satellite C55-B1063, Part number PSKT6V, serial number xxxxxxx, I have good picture with no sound when I connect HDMI cable, please help what is the driver name to down load from drivers download

More replies
Answer Match 50.82%

Hi,

I am trying to show my Toshiba Satellite T130 display on my Toshiba 32" LCD TV, model 32BV702B, using an HDMI cable. The laptop recognises the TV and when using duplicate or extended desktop, the builtin laptop display behaves as expected. However, the TV shows "No Signal" when the HDMI input is selected.

We have another laptop with an HDMI output and this setup works fine. On both laptops we use a 1366x768 display.

Does anyone know how I can get this working on the Toshiba laptop?

Thanks.
Ellie.


(P.S. It appears that someone else had a similar problem: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=205123] . The solution in that case was to use a VGA cable instead of HDMI and the original problem wasn't solved. I'd really like to use my HDMI cable!

A:Satellite T130 - HDMI Display not working

Well, the other option is trying to recover the notebook using the HDD recovery or recovery image created with the preinstalled Toshiba recovery creator software.

I read the other thread and the other user did not try this?
At the other hand you could try to set the BIOS to default and save the changes. Be sure that HDMI is enabled there.

Also try this:
Disconnect AC adaptor and battery
Wait some hours (3-4 hours) and then press power button for 30 sec.
Then connect both parts and test the notebook?s HDMI.

1 more replies
Answer Match 50.82%

Hi all...

I hope you can help. I bought my new Satellite in about October last year and from day one I've been experiencing problems connecting an additional monitor. Originally I had an old monitor with a VGA connection, and of course this computer only has HDMI.

So I bought an adaptor, which didn't work. I tried connecting my computer to the tv monitor with the HDMI cable to test it, but it still didn't work. It's still under warranty so I sent it back to Toshiba service, who couldn't find anything wrong with it, and returned it to me.

So I bought a brand new monitor, (a BenQ), and a brand new HDMI cable. Indeed for some reason it worked for a couple of months.and now doesn't. The computer won't detect the monitor, and the monitor says there is no cable plugged in when I attach it to the computer.

I've tried everything and it's driving me crazy.

A:Satellite S50T-B - HDMI port issues

Hi

The VGA-HDMI adapter will not work because HDMI provides digital signal and VGA (RGB) port supports analogue signal. You cannot mix both!

Anyway, back to your HDMI issue.
Please try this workaround:
First of all go to BIOS (F2) and set the BIOS back to default settings (F9) and save changes (F10).
Now connect the notebook and TV with an HDMI cable. Both units should be OFF during the connection.
Then power up the monitor and then the notebook.

As far as I know you have to use the function key: FN + F4 to switch to external or internal display.

Please check this!

1 more replies
Answer Match 50.82%

Hello,

Is there a driver for the HDMI port for the Satellite R830?
It no longer connects to a TV.

I have tried different TV's but still nothing.
Also there is no HDMI under the device manager under the control panel, should there be?

Many thanks for any help or advice.

A:Satellite R830 - HDMI port is not working

Hi
I don?t know what Windows system you use on this notebook but the HDMI driver isn?t available since the HDMI port driver is part of the system and should be recognized automatically.

For HDMI sound capability you should install the right sound driver and should enable this in control panel -> sound -> playback device

In order the HDMI (digital out) would not be listed there, right click and choose:
show disabled devices, show hidden devices.

Usually the HDMI connection isn?t very tricky. Everything should run automatically.
Connect both devices using HDMI cable.
Power up the TV, then computer.
Now use the function key (FN key) video output combination in order to switch to video out (HDMI).

Note: the right HDMI channel should be chosen on your TV

That?s all

1 more replies
Answer Match 50.82%

After upgrading my Toshiba C660 to Windows 10, HDMI audio does not work on my TV anymore.
Full updates from Windows update installed.
No HDMI console pop up anymore when connecting the HDMI cable.
Im listening to my films through the TV with headphones

More replies
Answer Match 50.82%

Hi guys

Having problems connecting my Toshiba laptop satellite C50-A-138 to my Toshiba LCD COLOUR TV Model no:40L3451DB.

When connecting the laptop with a HDMI cable to the TV, I get picture but no sound. I have already set the tv as the default but it makes no difference.I have set up all the sound setting i can see to full. Have any of ye guys got any solutions or ideas ??????

More replies
Answer Match 50.82%

Just wondered if it's normal for my laptop to output a max of 1280x768 through HDMI to my 26" LCD TV?

Its a Satellite R830 i3 with hd3000 graphics. I have 8GB RAM. Tried under Windows 7 and 8 but the same.
Also tried custom resolution but it just says on the TV out of range.

Mt graphics driver is up to date and I had full hd working on this TV via another older laptop.

Any suggestions please?

A:Satellite R830 and video output through HDMI

I don?t know your LCD TV specifications but fact is that external resolution depends on three options:
graphic card driver, graphic card and the external device connected to notebook/computer.

So if your TV does not support an higher resolution, you will not be able to choose another resolution.
If your TV supports higher resolution but the graphic card driver and graphic chip would not support higher resolution, you will also not be able to use it.

1 more replies
Answer Match 50.82%

HI -

I have a satellite click mini and a PC screen with VGA only.
Can you give me a link to an adapter on Amazon.co.uk which will definitely work? and the required specs?

Will I be able to use audio out from the HMDI (so that I can use headphones and microphone from different headsets?)

A:Satellite Click Mini - Need a VGA to HDMI adapter

Raytaylor

You need a Hdmi --> Vga and not the other way around. I don't know where you live but Try electronic components stores, but you'll find them also on some computer stores like compusa worten mediamarkt (Eu)

1 more replies
Answer Match 50.82%

Hi!

I've been having problems with my Toshiba Satelite L50D-C-12X. The laptop freezes whenever I watch netflix etc while plugged in to HDMI. It becomes completely unresponsive, I need to long press the power button to force it to shut down. It only happens when it's plugged in to my TV through HDMI.
All updates both windows and toshiba are up to date.

The laptop is only 3 months old, Processor AMD 10-8700P, it runs windows 10 64 bit

Can anyone please help me fox this??

More replies
Answer Match 50.82%

I have been using an AOC monitor as a second screen attached to my laptop via HDMI under Windows 8.1.

The monitor is telling me that there is no signal from the HDMI port. I have changed the cable and changed the port on the monitor, but it still is not working.

Can you help?

A:Hdmi port no longer working on Satellite Pro R50-B

Could you provide more info:

What notebook model do you have?What system is preinstalled?Did you try to reinstall the graphic card driver?

5 more replies
Answer Match 50.82%

Hello

I've tried almost everything, but it doesn't seem to recognize the HDMI as sound player. Image is good, but sounds keep playing from the speakers of the laptop itself.

I've checked the playback tab on the sound config and it doesn't appear HDMI device to select.

I've also checked on the Device Manager and uninstalled the "IDT High Definition Audio CODEC" wich was automatically updated once reset the laptop, but I didn't appreciated any changes at all.

It is there any concrete driver to install?

Please, any advice will be much appreciated.

Regards

Juan

A:Re: Satellite Pro C50-A doesn't reproduce sound via HDMI

Wait a moment.
When you see the content on the TV please open sound properties in control panel > playback and check entries there.

Click with right mouse button thee and choose both options (show disabled, disconnected devices).
Usually HDMI output should be listed as disabled device and you can enable it manually.

Disable speakers and enable HDMI device and everything should be OK.

3 more replies
Answer Match 50.82%

Hi,

I have been using my Satellite Pro R50 (Windows 8.1 64bit) for about a year now and there is an problem I am struggling to solve.

Whenever I plug a HDMI cable into the laptop the machine freezes with a black screen. Removing the cable doesn't return the laptop to its prior state and it will not accept any commands from the keyboard. I'm therefore forced to hard reset the machine.

On this forum (and some others) the first suggestion is often to download the latest Intel drivers, which I have done from this site:

http://www.toshiba.co.uk/innovation/...jsp?service=UK

so I am reasonably confident that my machine is up-to-date in that regard.

I'm sure this problem has been encountered before, I just haven't managed to find a solution yet.

Any ideas?

David

A:Satellite Pro R50 crashes when inserting HDMI cable

Try the latest graphics driver from www.intel.com
Also update the BIOS.

1 more replies
Answer Match 50.82%

For some reason, my laptop can only run two channel audio from HDMI. What should I do to get the sound to run in 5.1/7.1? I'm using a Harman Kardon AVR247 reciever and it isnt the problem seeing as how it was hardly ever used when I got it.

More replies
Answer Match 50.82%

Hi all,

I just tried to connect my Satellite R630 with my LCD TV with a HDMI cable. However, the image on the TV did not fit the whole screen, with HDMI 1 port (my TV has 3 HDMI ports), there was still 1.5 inch black space.

I was wondering if there is anything I missed? The connection with TV has been very good with a good old VGA cable. Thanks for any advice.

Tim

A:Re: Satellite R630 - HDMI - the image on the TV did not fit the whole screen

Have you tried to play with all available display settings?
I don?t know which Satellite R630 do you have exactly and which graphic card is inside but check please all advanced options for display settings at first.

2 more replies
Answer Match 49.98%

The HDMI port on my Satellite L500 laptop is not sending information to my sony bravia tv. All was working fine up until a couple of days ago. When i plug the hdmi lead into the port, it seems as if the laptop is aware it's plugged in as the screen flickers. The fn +F5 keys do as they should, but no picture appears on the tv. The tv shows a lead is plugged in also and again the screen flicks to say a source is there but then remains black. I can't see an issue in device manager and all drivers are saying they're up to date. I have also tried a new hdmi lead but nothing. Can anyone help with this?

A:Toshiba satellite L500 HDMI no longer works.

Try running a System Restore back to a previous point when it was working.

If still not working uninstall and re-install the graphics drivers from the Toshiba Support site for your model.

19 more replies
Answer Match 49.98%

hello can you help me with this i have a toshiba satellite p70 PSPLPA-0LX040 i just done a clean install of windows 10 and now i have no sound with my HDMI can you help

A:Satellite P70 PSPLPA - No sound using HDMI after Windows 10 installation

Have you installed windows 10 in uefi mode (4 partitions) ?

1 more replies
Answer Match 49.98%

Hello All,

Well this is starting to drive me to distraction and Im hoping theres someone who can put me out my missery lol.

I have been trying to hook my laptop (toshiba satellite pro p300) up to my LCD TV via the same HDMI cable I use for my PS3 but the connector just wont fit. I keep finding all these posts in various forums saying how they cant get sound out the HDMI connection...that would be great, as at least that means they have them connected.

Are there different connections for HDMI? The one I have is diagonal connector but the port on the laptop is more square, and just doesnt fit. So if there isnt a connector, does that mean I have a funky port, on the laptop.

There is also the matter of connection my laptop to my amp that controls the surround sound system. What connection is best to use, as there is no real audio out connections?

Cheers

A:Satellite Pro P300 - HDMI output port doesn't fit

Hi

Can you please tell us what Satellite Pro P300 you have exactly? I mean the exact model number.
Maybe you can also post a picture of the HDMI port. Normally there are no different HDMI ports, all have the same physical dimension.
I?m not PS3 owner but maybe it has a special connector. Have you tried another cable?

Regarding the audio connection I use the normal line out port for my external speakers. Did you test this?

1 more replies
Answer Match 49.98%

When playing video through the HDMI to my TV I am getting horizontal lines from top to bottom.

I have tried changing the refresh rate, changing cables, changing ports different videos and video players and all the same. I have a Hannspree 32 inch 1080p which supports 50HZ and 60HZ.

Any ideas on how to rectify this?
 

A:Satellite P845-10J - HDMI to TV - horizontal lines from top to bottom

Resolution should be set to the TV's native resolution. Assuming it's a native 1080P screen, that would be (1920x1080). Verify in the User Manual or by looking up the model both the screens native resolution and the supported input resolution. Refresh rate will depend on your region. The US and other NTSC regions use 60hz.

Aside from that, test the TV using a different computer/device on that port.
 

1 more replies
Answer Match 49.56%

The problem started as a HDMI-cable was plugged into my running Satellite T130-17E and the screen was closed down. From that point the notebook screen stopped working. When booting the windows start-up logo is on for a couple of seconds and just before the entering the desktop the cursor is visible on the screen. But except from these short moments there is no action on the notebooks screen. When I reinstalled the driver to the graphic card there was some short moments (less than 0,5 sec) when the screen was active.

I can use the notebook without any problems via HDMI to my TV. And when I adjust the screens brightness (FN+F6/F7) the black screen can get more back-lighted.

When I turn off the HDMI-output or plugs it out - nothing happens on the notebooks screen.

Can some of you please try to help me out as I really need my notebook to work normal again. If you can help me sort out this problem I'll be very grateful-

Kind Regards,
Jacob Lindberg

A:Satellite T130 -Black screen- HDMI works perfectly

Hello Jacob

Start your notebook with HDMI cable and wait until windows is fully loaded. When you see the desktop on the TV use FN+F5 key combination and switch to the LCD back.

Can you do this?
Does it work?

3 more replies
Answer Match 49.56%

Hello!

I need support, I'm getting CRAZY!

I bought an screen 27" to connect via HDMI to my laptop, I tried in the store and the display worked straight ahead just connecting the HDMI.
They sent me a few days later a brand new one, and for my surprise it doesn't work.

I know that my laptop works perfectly fine, I connect it regularly to the TV, using the same cable, and the screen works with other computers.

I found in Toshiba's website an update for display drivers, Intel (R) HD Graphics.
Right after the installation of this drivers the screen works!

I can see the duplicate of the image, no issue, but then, I have to restart the computer to save the changes.

Upon the restart, the image isn't seen any more, Intel Graphics doesn't recognize any other output, the screen shows a clear message that there's not HDMI signal coming.

if I reinstall the drivers, the screen comes to life again, only delaying the restart action I get it to work for a while. In the last try I made it didn't last longer than 15' about.

I've also looked into the website of Phillips (brand of the screen), found a pack to update the screen drivers for Windows 8. But my system answers that is all up to date...

SOS!

A:Satellite U840W-10R Problems connecting an extra display HDMI

Hi

What happens if you use the FN + F4 (or only F4) key combination?
Does it switches between the internal and external display?

The FN + F4 changes the active display device. To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.

3 more replies
Answer Match 49.56%

Does anyone have a clue if it is possible to run an ultrawide 3440x1440 monitor via P50 HDMI port.

I have dual graphics - AMD RADEON R9 M265x and INTEL HD 4600. Not sure which one does the HDMI output on the p50-b. I think the Radeon has 2gb DDR5 if this is important.

I am not planing on playing games, I would like the wide screen for productivity - word, spreadsheets, drawings, charts, diagrams etc. - multitasking.

More replies
Answer Match 49.56%

Hello everybody,

I just bought a "half" of an U920T: a laptop without the display(which was literally ripped off, you could see the bent hinges and what is left of the cable).
It's a great piece of hardware and I can use it with an external monitor, thanks to the HDMI connection.

What is the problem?
I only get video signal on the HDMI display, when windows(10) is loaded.

What do I want?
I would very much like to access the bios settings and set the primary output to HDMI, if possible.

I have already tried:
- removed the display cable from the mainboard
- using the F4 and the Fn+F4 to switch between displays. (it only works in windows)
- using the Toshiba System Settings Windows App. (there is no "video output" setting there)

Would any of you who have a similar model be so kind as to:
1. Check their bios to see if the option is available?
2. Upload a picture with the location of this setting in bios, or even better a video?

Thank you!!
Stefan

More replies
Answer Match 47.88%

Hello,
I have a Dell XPS running windows 7 and I cannot connect to a TV with an HDMI cable. Both the PC and the Sharp flatscreen have HDMI ports and I have used a HDMI connection successfully on the TV before. I have restarted the computer with the HDMI connection already made and when the computer restarts the picture shows on my TV up until the point where windows boots up then the TV goes blank, my computer is recognizing the TV because it shows it in the display settings but no matter what I do I can't get a picture to show. Im using a ATI Mobility Radeon HD 3670 display adapter, if anyone can help me out it would be greatly appreciated.
 

More replies
Answer Match 47.46%

When I connect hdmi cable to laptop the screen goes black and tv screen states            Out of RangeCan anyone help please? 

More replies
Answer Match 47.46%

When I connect my notebook to the TV using HDMI the sound does not come from the TV it comes from the notebook. Also, when I go on to manage audio devices in my Control panel the TV does not show up even in the disable and hidden list. I am not sure if this relates to the issue but I have a code 10 on my HD audio driver if that does anything to affect the sound.Please help 

A:No Sound from TV when i connect with HDMI

Hi: Yes, that is the problem (code 10). Since the graphics drivers are fine, let's not mess with those by running the graphics driver file. Let's just play with the HDMI audio driver file inside the Intel graphics driver. First, download and install this free file utility.  The 2nd line is for 64 bit. http://www.7-zip.org/ After you install 7-Zip, download and save, but do not run this graphics driver. This package provides the driver that enables the Intel High-Definition (HD) Graphics in supported notebook models that are running a supported operating system. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp72370.exe After you download and save the above graphics driver file, right click on it, and select 7-Zip from the list of items. Have 7-Zip extract to:  and let it extract the file into its folder name (sp72370). Once that is done, go to the device manager and click on the problem HD audio device. Click on the driver tab.  Click on Update Driver. Select the Browse my computer for driver software option and browse to the driver folder 7-Zip created. Make sure the Include Subfolders box is checked and the driver should install. Then restart the PC, and you should be good to go.  

1 more replies
Answer Match 47.46%

So, as the title says I'm having trouble with the connection from my laptop to my tv through hdmi, and I've tried quite a few things to solve the problem, but I'm not the most gifted person with computers or technology as a whole, I've simply run out of ideas.

Before I moved out from my parents' house in november, I'd lent a tv of theirs (a non-smart lg tv) that worked perfectly with my current laptop and hdmi, so I had to get a new tv+hdmi. So I went out and bought a new tv (LG 42LF580V). After a week it stopped being able to connect with my new 5 metre hdmi cable, so I went out and got another hdmi cable (also 5 metres). That worked for about 2 days and then that also stopped working, so I figured it was the tv. I sent it back and ordered a new tv (Samsung UE40J5515). I never got that to work with my hdmi cables and laptop, so I sent that back too. Some time in the middle of all that I've had my laptop connected to various things at school through hdmi, and I've also had it connected to both my neighbour's and my friend's tv so see if something was wrong with my laptop, but I had no problem with that.

Xmas was approaching and as I went back to my parents' house on holiday, I of course brought my laptop and one of the first things I did was connect it to the non-smart lg tv that I used to use. It connected instantly and worked without any problem at all for the next two weeks until I had to go home.

When I got home... Read more

A:I can't connect my laptop to my tv via hdmi?

A solution I've not yet tried is to get a vga to hdmi cable instead of hdmi to hdmi. I honestly don't know the difference or if that could work, but if anyone knows, I'd love to hear it.
 

1 more replies
Answer Match 47.46%

I have an HP Pavilion 23-h109 TouchSmart All-in-One Desktop PC I'd like to output some movies and pictures from my computer onto my TV but there are only USB ports and no Video out  ports in this computer. The TV I want to connect to can take VGA and HDMI in.  It's not a smart TV, so there's no abilty to mirror as screen, etc.  so it will have to be a wired connection to the HP computer.   Is there a USB adapter that I can buy to connect the two?  Or some other method to send my video/audio output to the TV? Thanks   

More replies
Answer Match 47.46%

So I have a Acer AXC-705 desktop computer. It is conneted to my tv via a hdmi cable but doesnt display. I am greeted with the Acer start screen but then does not display. I've had it for 2 weeks and it has been fine until now. 










Solved!
Go to Solution.

A:I have a Acer AXC-705. It is connect via HDMI to m...

try this:at boot press ALT+F10  this will start Acer/windows recovery.From the Recovery screenClick on Troubleshoot.Click on Advanced Options.Click on Startup Settings.Click on Restart.The PC will now reboot to the Startup Settings screen.Press 4 to Enable Safe Mode as prompted. once in Safe mode, go to Device manager, click on Display adapters, right click on your VGA and choose uninstall(tick to uninstall software too). then reboot

11 more replies
Answer Match 47.46%

So I have a Acer AXC-705 desktop computer. It is conneted to my tv via a hdmi cable but doesnt display. I am greeted with the Acer start screen but then does not display. I've had it for 2 weeks and it has been fine until now. 










Solved!
Go to Solution.

A:I have a Acer AXC-705. It is connect via HDMI to m...

try this:at boot press ALT+F10  this will start Acer/windows recovery.From the Recovery screenClick on Troubleshoot.Click on Advanced Options.Click on Startup Settings.Click on Restart.The PC will now reboot to the Startup Settings screen.Press 4 to Enable Safe Mode as prompted. once in Safe mode, go to Device manager, click on Display adapters, right click on your VGA and choose uninstall(tick to uninstall software too). then reboot

11 more replies
Answer Match 47.46%

Hello all, i am currently building a gaming PC that also allows me to watch my Blu-Ray via my HDTV, i want to be able to connect it via HDMI and have the Audio AND Video going through my TV Screen/Speakers, here is the motherboard im considaring putting in it http://www.ebuyer.com/product/200984 and here is the graphics card im considaring putting in it.. as you can see the motherboard has the S/PDIF (optical) output i hear thats one of the things i need.....and my graphics card which im considaring getting http://www.ebuyer.com/product/202703 as you can see has the HDMI connectivity.....i hear its not as simple as getting an HDMI cable and plugging it from the PC to the TV....as its coming from the graphics card it wont transmit sound too will it?.....sorry im a bit confused, can somebody help clarify this? thank you!!!

Joe Lamden
 

A:Building a PC to connect to HD TV via HDMI

Hi,

Personally I would go for a Gigabyte board if you can find one that suits your needs. I have generally found them to be better quality than Asus, you may well get similar answers from others on here, especially if you have that sort of money to spend on it.

maybe something like: http://www.ebuyer.com/product/195332 which is a bit cheaper but probably better (in my opinion).

I also, personally, think ATI have the edge with graphics at the moment. I have always been a bit of an NVidia fan but the general concensus seems to go toward ATI currently.

What other specs are you looking at, I am assuming your are looking at around £1500-£2000 easy, for the full rig if you are spending that much on the graphics card and motherboard alone, wish I had that sort of money to spend on a PC haha.
 

3 more replies
Answer Match 47.46%

Hello

I am trying to connect my Laptop Dell XPS M1730 windows 7 (2x 8800M GTX cards) - to my HD ready TV from LG.

If I use a HDMI calbe directly from my desktop pc, it works perfectly (I don't even need to turn down my resolution)

But my laptop does not have an HDMI port. So I bought a DVI-D(single) to HDMI cable. And connected them up.
- The TV detected something. And then said "no signal" on the screen.
- My laptop screen went black when I connected.

Do anyone know how to fix this? Am I using the wrong cable?
DVI-Digital Single link to HDMI is the cable I am using.
The laptop has DVI Female connector.

The exact cable I am using below in the picture:

A:Can't connect DVI-D(single) to HDMI on TV

When you try this, what resolution and refresh rate is your monitor on your laptop running?

What is the native resolution of your TV?

I've seen some strange things when connecting up to a TV from a laptop where either the TV can't handle the resolution/refresh rate that the laptop is pushing out or the laptop can't push the right resolution/refresh rate.

It's an unlikely solution, given that you have good video cards in the laptop - but try this - set the resolution as low as you can set it - 1024x768 for example, and the refresh rate as high as you can - 75hz, for example. Then plug in the TV. If that works you may need to play around with the resolutions to see what happens.

Also, when you connect the laptop - and if the screen goes black on it - hit windows key + P, then hit the "right arrow" key on your keyboard once, and then hit enter. That might switch the display back to the computer - if it works you can then troubleshoot further.

6 more replies
Answer Match 47.46%

I've connected my HDMI-cable to my PC (graphic card EAH5770) and to my TV (Sony Bravia 26'', about three years old) but I can't choose the TV as my other display from Catalyst Control Center or from Windows' display preferences when they are connected. What should I do to get it to work?

EDIT: In other words my computer doesn't recognize the TV and I don't know why. And here's some specs if they help in any way.

BIOS: BIOS Date: 09/14/09 11:49:05 Ver: 08.00.14
Processor: AMD Phenom(tm) II X3 705e Processor (3 CPUs), ~2.5GHz
Memory: 6142MB RAM
Operating System: Windows Vista™ Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.100218-0019)

Display Devices: Card name: ASUS EAH5770 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter (0x68B8)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_68B8&SUBSYS_D132174B&REV_00
Display Memory: 3819 MB
Dedicated Memory: 1012 MB
Shared Memory: 2807 MB
Current Mode: 1680 x 1050 (32 bit) (60Hz)
Monitor: SyncMaster T220/T220G,SyncMaster Magic T220/T220G(Digital)
 

A:Can't connect my PC (with EAH5770) to TV via HDMI

Confused. Do you have a display running already, and this is a second monitor? Or is this the only one?
I assume it is a second monitor, as you say you cannot see it, which implies you have a screen to see it on. try using ONLY the HDMI connection, see what happens then, ensuring that the TV is set to the correct input. I have a triple monitor set, and th eHDMI has had no detection problem so far. The only thin gI can think of is to change the first monitor to the second DVI slot. the 5770 should have 2 dvi and 1 hdmi i believe, one of the dvi is actually an alternative input for the HDMI.

Putting it simply ( I confused myself, there!) try just the HDMI. That should work fine, then plug in the second monitor.
If that does not work, or you get nothing for the HDMI, try the DVI in the second slot. Either way, should cure it.
 

1 more replies
Answer Match 47.46%

So my TV stopped working and I'm wanting to connect my PS4 to my computer monitor via HDMI. The problem is that I don't think my computer even recognizes my HDMI for some reason. I plug it in and get nothing, not even a notification of something being plugged in. I tried to connect it a few times when I first got the computer but it didn't work then either. I heard that All in One computers usually have a button you push to start viewing via HDMI, but I haven't found one.  As a last resort I tried turning off my PC, plugging my HDMI in and then starting my computer back up. Nothing.  Any suggestions? 

A:How do I connect an HDMI(my ps4) to Pavilion All-in-One des...

@AlexSivef? There should be two more digits and possible a w at the end of the product name. Please post it. 1.  The complete Model Name. or Product Number. of the notebook - see This HP web document if you don't how to locate the model number and\or product number.  The HP Recline, 27 TouchSmart and the Omni 27 have an HDMI input port that can be selected by the menu keys on the side of the display.   The HP AIO 23-1xx PCs do not have an HDMI input port, they have an HDMI output.  

3 more replies
Answer Match 47.46%

HiI bought this laptop last week and have attempted to connect it to my TV to use as an external display as I used to do with my old Dell laptop but have been unable to do it. I know 'how' to do it but when I connect the HDMI, it just doesn't detect the signal so I am unable to select any of the options (Extend/ Duplicate etc). I have tried looking at the Graphics Properties to no avail. I just can't find the option to change anything that will actually make it worse. The HDMI cable definitely works (I have tried it with another device and it worked fine). Can I have some advice please? I'll also stress again that this is a brand new laptop suggesting that all drivers etc are up to date. ThanksAlex

More replies
Answer Match 47.04%

Hi all,

I'm a bit desperate so I came here hoping to find some answers.

So I wanted to connect a second monitor (which is a TV screen) to my PC to watch movies, but suddenly my PC wont send any signal to my TV, so I tried connecting all kinds of HDMI cables to all kind of TVs/monitors laying around in the house, and my conclusion is that whenever I tried to connect a second monitor with HDMI directly to my PC it wont show anything and it also doesn't show up in my Display settings on my PC. So from what I can tell the problem lays with the PC itself (within windows probably).

I have up to date display drivers so that is not the problem.

Also something worth mentioning is that my main PC monitor is connected with DVI, and the DVI connector works just fine on every device.

Hope someone can help me find an answer soon!

More replies
Answer Match 47.04%

Hello,So i use a projector (Epson SB03) to watch movies (I use my HP Pavilion 15 Notebook PC  for this) I use a HDMI adaptor to get a signal to the projector, and about a week ago it stopped connecting. The thing is, it works on my second laptop, so it can't be the projector; either the cable or the HDMI port on the pavillion. I want to see if anyone knows any fixes before i go to buy new cables and adapters etc. any help would be apreciated.thanks~Teje










Solved!
View Solution.

A:HP Pavilion notebook 15 PC does not connect to HDMI

Hi TejeIf you roll back the AMD Display Adapter driver to the previous version the HDMI output will work again. That's what I discovered when I could not access my Epson Projector. There must be a glitch in the new driver which was issued by AMD in March 2016. CheersWAR1

3 more replies
Answer Match 47.04%

Hi - I am not able to connect an external screen to the laptop. Nothing happens when I connect the screen to the laptop. Screen says: no signal. Laptop does nothing. Mirring says didn't found another screen. Might be realted:Ther is an error in Device Manager: ISB-IF xHCI USB Host Controller has an exlamation mark in a yellow triangle. Thanks,Zoltan 




Zoltan

More replies
Answer Match 47.04%

We are just not getting the results that we were hoping for, we are connecting thru a SPDock. Any direction would be appreciated.

More replies
Answer Match 47.04%

Hello all,


I have a quick question. My new graphics card has a HDMI port and I was wondering if there is any advantage of using that port to connect my graphics card to my monitor over the normal DVI port? Is it worth buying the cable that I would need to do this>

many thanks,

A:Use HDMI or DVI to connect monitor to computer.

The only difference is HDMI carries audio and video and DVI carries Video only.

9 more replies
Answer Match 47.04%

Hello everyone!!
When I connect the PC with the HDMI cable (video card port//gtx760) to the TV, it doesn't detected it and brings me this message: "This source is not connected. Check the connection status."
Instead if I connect the HDMI cable to the PC (through motherboard port) the TV detects the presence of the cable, but without working (and if it did, however, the resolution would be bad).
So my question is: why the TV does not detect the PC while is connected through the HDMI cable? And what can I do to fix it?
Thanks in advance.
 

More replies
Answer Match 47.04%

Hi All: recently bought HP Envy 750-197c with dual HDMI, along with LG LED Monitor 24m47. For the life of me, I cannot get the computer to dispaly when connected via HDMI. I've tried different HDMI cords, connected other peripherals via HDMI to the monitor without any issues, and even tried connecting the computer to 2 different TVs via HDMI but nothing. Does anyone have any idea why I cannot get my computer to dispaly via HDMI on my monitor? Any help at this point would be great. Running Windows 10. 

A:Envy 750-197c won't connect via HDMI

Hi there @johnjpas34,Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that you are having an issue with getting a display connected with HDMI to come up. I am happy to help with this. First, check out this: HP Desktop PCs - Connecting Monitors and TVs to Your PC (Windows 10, 8). Then be sure you have the drivers for the display installed. If there are not drivers specific to Windows 10, then try installing the older drivers using compatibility mode in Windows 10/ Please let me know how that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

2 more replies
Answer Match 47.04%

My laptop only has VGA output (no HDMI or DVI) so I purchased a powered VGA to HDMI converter. I am getting sound but no video. I am receiving an error message on my HDTV screen that reads "Incompatible video signal received. Check your output source" I am running Windows 7 and accessed my NVIDIA control panel settings but can't seem to get it to work. Do I need to adjust the video output settings?

A:Trying to connect laptop to HDTV via VGA to HDMI

  
Quote: Originally Posted by masterchefstan


My laptop only has VGA output (no HDMI or DVI) so I purchased a powered VGA to HDMI converter. I am getting sound but no video. I am receiving an error message on my HDTV screen that reads "Incompatible video signal received. Check your output source" I am running Windows 7 and accessed my NVIDIA control panel settings but can't seem to get it to work. Do I need to adjust the video output settings?



Hi there

Now that's a different issue completely --some of these VGA==>HDMI video converters aren't much use I'm afraid. - I had one ages ago but could never get it to work -- what you could try though is see if your computer can set to DUAL monitors first and then try and use one as the primary. I think (if I remember W7) that Windows + P key scrolls through the external monitor settings.

With VGA output from one of those converters you won't get 1080p - you might have to set your TV to a much lower resolution than 1920 X 1080.

Cheers
jimbo

1 more replies
Answer Match 47.04%

To transfer digital miniDV films to my computer Aspire V5-551G I need to connect the videocamera.The camera has a 4 pin Firewire IEEE 1394 and supporting software.My Aspire has HDMI, Ethernet, USB3 and USB ports, but not IEE 1394/Firewire.Do you have any solution? BR / Ulltom

More replies
Answer Match 47.04%

Hello. I use Windows Vista on a nearly 6 year old Acer Aspire 5930.

My old monitor stopped working, so I borrowed one from a friend. That will connect through VGA(my old cable), but for some reason everything got a greenish look, impossible to use for anything besides reading.

So I also borrowed his HDMI-cable. I connect them both, it makes the sound indicating it's connected, but nothing happens. If I have both VGA/HDMI at the same time the VGA works. If I remove VGA it won't work. I've tried numerous different combinations of this.

I've tried the Fn+F5 thing. Only works with the VGA.

Tried rebooting it, both with VGA and HDMI connected. Same result.

I'm fairly certain I've connected this pc to a tv 2 years ago, but then the sound didn't work, but the visual was working fine.

I've cracked the screen on the laptop. Everything I've been trying I've done with VGA connected.

The video driver is up to date.

The monitor is definitely working on a different pc. The VGA is probably working. My old monitor died due to power failure(It just turned off and won't come back on) so there's no reason to believe the VGA-cable isn't broken either.

A:Won't connect laptop to monitor with HDMI

This is one old box and I'd suggest that the integrated video chip is nearly dead or at least the HDMI aspect of it is.

1 more replies
Answer Match 47.04%

So I connected my Dell laptop to my LG LCD TV for the first time via an HDMI to HDMI cable, and it worked great. The next time I attempted to do this, my TV displayed "no signal" on every hdmi input. I've tried updating drivers and using the tool that is partnered with my graphics card to appoint the TV as the primary monitor, but I've gotten nothing.

Both the laptop and TV recognize that the HDMI cable has been inserted, but it won't show me a picture or give off any sound. Help!

Craig
Dell Inspiron 1525
OS Version: Microsoft® Windows Vista™ Home Basic , 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2037 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 448 Mb
Hard Drives: C: Total - 238433 MB, Free - 64013 MB;
Motherboard: Dell Inc., 0U990C, , .GZLYNF1.CN7016685K00L8.
Antivirus: AVG Anti-Virus, Updated: Yes, On-Demand Scanner: Enabled
 

A:Need to connect Dell Laptop to LG TV via HDMI

Have you tried Pressing Fn+F8? It may take more than one Press of the Key Combo to get the external Display the way you want it.
 

2 more replies
Answer Match 47.04%

Brand new mac mini. Want to use HDMI, but when I connect cable, boot up mac and turn on Monitor, the mac starts to go into new product mode, then quickly picture switches to 2 alternating graphic pictures of what looks to be 2 different computers. I gather this means monitor is looking for a suitable source?? By way of a test of the monitor, I hooked it up to a Macbook Pro using DVI and it worked fine. Just no luck with the HDMI. Thanks for any help.

More replies
Answer Match 47.04%

I can't connect my pc with a HDMI output to a 48 inch tv that has HDMI input.

I've tried using the VGA connection from the pc to the tv, that still won't work, it's showing 'no signal'

I've gone to display and tried extending the display, it's not detecting another type of display.

I don't know what else to do.

A:[SOLVED] Can't connect pc to 48 inch TV via HDMI

Hi and welcome to TSF what is the make and model of your computer

6 more replies
Answer Match 47.04%

I have connected my Samsung Ultrabook operating on Windows 7 64-bit to an HP Compaq LA2450x monitor using the HDMI port on the Samsung and a converter to the DVI port on the monitor. The monitor is showing no signal for DVI and going to sleep. Consequently I have not been able to use the monoitor yet and am still working off the ultrabook screen. Do I need to change any settings on the ultrabook in order to create a signal? Is there something else I might be missing? I have switched both computer and monitor off and restarted several times without any luck. I followed the manual installation instructions for the driver and it seems to be correctly installed. Is there anyone who can help resolve this frustrating issue? 

More replies
Answer Match 47.04%

I ran over to CompUSA and purchased a VGA to HDMI Converter box. Set me back $100 not to mention the cables to hook it all up.

Once I got home, I followed the instructions in the converter box. I turned off both devices... plugged in the wires... turned on the computer and set dual output... turned on the TV and set to HDMI input. The TV says no signal. And, yes... the converter box is plugged in an turned on as well.

I know the VGA output works on the computer because we use it at work all the time. At work, we use a VGA output converter that has to connect to a USB as well that sends the video over ethernet.

I've tried messing around with display settings as far as resolution, etc., but can't get anything to happen.

Any help is greatly appreciated.
 

A:Solved: Trying to Connect VGA Output to HDMI on TV

hutsonjs said:


I've tried messing around with display settings as far as resolution, etc., but can't get anything to happen.Click to expand...

Did you test the setup using a specific combination ofResolution, Frame rate and interlaced/non-interlaced settings that you know is supported by the TV? The TV's specifications should list it's native video format support as well as any alternate video formats.
 

3 more replies
Answer Match 47.04%

I am having trouble trying to connect my Xbox 360 to my pc via HDMI cable! i hvae an Windtop ae2020 all-in one pc and I am pretty sure that it has a HDMI input but when i try my screen just goes black and nothing happens. Could anyone shed some light on this for me please?

Below is a link to the specs of my pc

http://http://www.msi.com/product/mb/Wind-Top-AE2020.html#/?div=Basic
 

A:Help! i cant connect my Xbox to pc via HDMI Input

6 more replies
Answer Match 47.04%

Hope this time my problem will solve as soon as possible.I connect my laptop use VGA-Converter-HDMI to my TV.But No audio. I read so article ask to change to hdmi audio at playback device.Unfortunately my playback device only show : SpeakersRealteck High Definition AudioDefault Device No HDMI Audio to select. P/S: I still cannot attach picture in my post event already report for last 4 month..Rubbish..

More replies
Answer Match 47.04%

I'm attempting to connect my laptop to my HDTV via HDMI connection. I found instructions on another post that says after connecting the HDMI cable to TV, select the appropriate TV input (HDMI1) and then open Control Panel-> Display in Windows (my OS is Win7 Pro). And it should find the HDMI device-not the case. 
Another post said to open the Intel HD Graphic Control Panel and use that interface to select and use the HDMI connection-that also only showed the Internal Dispaly.
How can I connect via the HDMI connector to my HDTV?

A:Latitude E5450 Won't connect via HDMI

I have the same problem. I am trying to connect with a Samsung TV. When changing the output video settings, I can only have access to the Samsung settings when I choose the option to "extend desktop". Still, when selected, nothing happens.

1 more replies
Answer Match 47.04%

Hey, months and months ago someone stood on my laptop screen and left it broken with the black and multicoloured patches all over it.
I was able to still use the laptop by connecting a hdmi usb lead from the laptop to the back of my tv. It worked fine for a few weeks before it started to cut out randomly.
Then it would only work by tilting or lifting the lead up a certain way. And now it doesnt work at all.
My tv says 'check signal cable' when things are on the right channel but arent connected, yet when i plug the lead in it says 'no signal'.
Im saving up for a new screen but until then i need to get my college work from my laptop.
Any ideas on why it's not working?

A:HDMI wont connect from laptop to tv

Try a new HDMI cable.

2 more replies
Answer Match 47.04%

Hey, I'm going to be headed off to college soon, and I'm switching from my old desktop to a new Razer Blade 2014, I am planning on still bringing my 2nd monitor to college and want to use it in my dorm room, My Monitor does not have a HDMI, but that is the only port on my Laptop. I thought this would be simple, because I was already running a HDMI to DVI-D on my desktop to my GTX 770 graphics card. While connected to my desktop, the monitor works normally. When I plug it into my laptop, I get nothing in response, The laptop will not detect the Monitor in screen resolution or in control panel. My monitor is a LG Flatron and my laptop is the Razer Blade 2014. I don't understand why it doesn't just plug and play like it did on my PC. Any help? Also, I am on windows 10 but the problem happened on Windows 8.1 aswell
 

A:Laptop will not connect to second monitor via HDMI

Has it ever worked? You may want to test using a different monitor and a true HDMI to HDMI cable, just to verify the laptop port functions properly.
 

2 more replies
Answer Match 47.04%

Hello,

I have a problem with my Lenovo Ideapad Z570 or with my TV Thomson 40FW3324. I'm trying to connect them with a HDMI cable. When I plug the cable in and extend or duplicate my screen nothing happens. I reinstalled my graphic card drivers (Nvidia 520M GT and INTEL HD 3000), it didn't help. I even bought a new HDMI cable to be sure that it isn't a cable malfunction. What should I do to get it working?

A:When trying to connect computer with HDMI to my TV I get no signal!

Have you selected the correct input on the TV?

8 more replies
Answer Match 47.04%

lenovo z470. Trying to connect to tv via hdmi. When I connect, the tv doesn't read anything. I tried dual-monitor mode, where it shows the same thing on both screens, then I tried nothing on my computer but show on the tv, still didn't work but made my computer screen go blank. Now when I connect my computer to hdmi, it goes blank. It seems ridiculous, this should be so easy, I don't know what's going on!
 

A:lenovo z470 won't connect to TV via HDMI

Are you setting the TV to the correct HDMI input? Can you test the HDMI input with another device or test the Z470 with another HDMI monitor or TV? Have you tried another HDMI cable?
 

1 more replies
Answer Match 46.2%

It was my understanding that the HDMI connecting cable carried both video and audio. I have purchased a Dell XPS Laptop that has the HEMI connector.

Connected it to my Sony Bravia 42" TV and the Windows Desktop was truly amazing to see. My problem is that the only audio I am getting is from the speaker in the Dell Laptop.

I was surprised that there was no sound (along with the video)!!!

Does it make sense to buy a mini plug for stereo to come out of the Dell Laptop and that split to a right and left channel to run through my sound sytem.

I think this might work but why am I not getting sound through the HEMI connection?

If anyone has dealt with this, I would sure appreciate any ideas.

Thanks,

Steve Bell

A:HDMI Connect to a Sony Bravia 42" using Dell XPS

You?re going to want to get into your audio settings and make sure your HDMI is set to send sound to your device.

If you are running Vista, right-click your speaker icon in the taskbar and select ?Playback devices? from the menu. From there, a window will open and should list your audio devices. Highlight ?Digital Output Device (HDMI)? in the list and hit the ?set as default? button. Also, right-click and make sure the device is enabled.

Cheers,

1 more replies
Answer Match 46.2%

Hi, I recently figured out that I can plug my Xbox 360 Video and Audio Cables into my computer. What me and my father tried, was that we tried opening windows media center (Since we have windows vista). We have been trying for 4 hours now, using a bunch of different methods. I'm not that very techie (Which is why I'm asking you guys) so I'll use the best terms I can. My main question is, how do I make my Xbox 360 screen appear on my monitor so I can play it.
Sidenote:If this actually works is there a way I can record what I'm playing?

Thank you all in advance.
 

A:Can't connect Xbox 360 to HDMI Computer Monitor.

Bit confused here. Why are you plugging it into the computer? Can you not just plug it into the monitor? Most have several ports, think one of them should work for you- lots have a HDMI input, that may be your solution.
 

2 more replies
Answer Match 46.2%

Hi

I have an i5-based DG67BL intel motherboard computer that has a DVI and HDMI ports with one DVI monitor connected to the DVI port.

I added an GeFORCE 210 graphics card to it that has a VGA and a DVI ports and connected additional two monitors to it.

So far computer is working fine with three monitors configured in windows as extended desktop.

This motherboard has just one PCIeX16 slot. It has 2 PCIeX1 and a PCI slot that are vacant.

I need to connect yet another DVI monitor. I took a HDMI<->DVI cable, connected it to the onboard HDMI port. the monitor was not detected.

I tried various combinations of monitors and bios settings in vain. Under no circumstances the HDMI port drove the DVI monitor.

The cable is working fine elsewhere.

What did I do wrong ? Is there something I need to buy/replace for this to work ?

Thanks !

A:How to connect additional DVI monitor to HDMI port

you 'need' to connect a 4th monitor? I recommend getting graphics card(s) to support your endeaver, but up to you.

Why don't you get a dvi to vga or maybe its a vga to dvi cord and connect the dvi monitor to the graphics card vga port?

Does it have to go into the HDMI port? HDMI carries sound as well as the video signal, dvi only carries video, and vga carries a lesser quality video

9 more replies
Answer Match 46.2%

I have a Yoga 11s that started having hdmi connection issues about a year ago and has recently quit connecting to an external monitor via HDMI completely. We tried upgrading to Windows 10 to see if that would overwrite any software issues - no luck. The HDMI port actually appears loose. I did an extensive search of the forum and found posts that recommended cutting down the rubber around the base of the hdmi cord - tried that and at least I had a little activitiy - in the upper right hand corner of the external monitor up popped a box that says DVI then VGA then HDMI - but then says No Signal. Tried the graphics card update recommended on a post from long time ago and a popup indicated I had a newer version already installed. I have taken it to a laptop repair place - said they couldn't get parts from Lenovo. I found an "authorized" Lenovo repair shop locally - when I called they said they only work on business machines Called Lenovo and they told me to take it to Best Buy - however since I purchased this directly from Lenovo, Best Buy said they can't work on it. I would rather not send it into Lenovo because they tried to charge my hubby hundreds of dollars when his 15 day brand new laptop quit working, claiming damage - luckily extensive pictures taken and dated prior to sending it in thwarted that attempt at extortion. Does anyone have any suggestions? I need to be able to do presentations and work remotely with this so it is no... Read more

More replies
Answer Match 46.2%

Hi,I have an Acer Aspire E 15 laptop with a HDMI port which I would like to connect to my Toshiba TV which only has a VGA port (no HDMI), so that I can watch programmes downloaded on my laptop on the TV screen. Please can you advise the best and easiest way I can do this?Thank you in advance!

A:How to connect Acer laptop with HDMI port to TV wi...

You have to get an adapter suitable for your TV and the laptop, something similar to this but make sure the specs are compatible.http://www.ebay.co.uk/itm/like/252400408679?lpid=122&chn=ps&adgroupid=27378760866&rlsatarget=pla-181...

2 more replies
Answer Match 46.2%

There is no HDMI output on my ENVY 700-327c. How can i connect it to my Samsung HDMI monitor? I have tried a DVI-D (24+1) to HDMI cable without success. The monitor can be connected with RGA which does work but i prefer to have digital input rather than analog. Can anyone explain the failure of the cable and/or what other options i may have. Thanks. Pittmann 

A:no hdmi output on my ENVY 700-327c. how do i connect it to m...

Hello @Pittmann, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how you are looking to connect your desktop computer to a Samsung TV using an HDMI cable and adapter, and I would be happy to help you! You should be able to connect your computer to your TV using an DVI / HDMI adapter, as long as the adapter is labelled "Active" for both sound and video to be seen and heard. You will also need to ensure that the specific DVI connector fits the pin configuration of the adapter. I hope this helps! Best Regards

3 more replies
Answer Match 46.2%

I am thinking of changing my TV while i was moving and i will watch more of YouTube, BBC IPlayer and Sky Player..

So is there any possible i could buy HDMI graphic card?? I have PC Express... so i can connect them both and enjoy more experience.

Any product you might advice me?
 

A:Is it possible to connect PC Case to TV Screen using HDMI cables?

6 more replies
Answer Match 46.2%

My laptop has a cracked screen and all I did was change the max memory in the msconfig menu and reset it and now it says no signal on my TV Help Plz!

A:my laptop wont connect to my tv via hdmi anymore

Did you lose track of your original thread?

6 more replies
Answer Match 46.2%

I have a dv7 series laptop.  I also have an HP elite 2201x monitor that only has a display port connection.  I bought a DisplayPort to HDMI converter, but it doesn't work.  What do I need to do to be able to use this monitor?  Thanks.

A:Can I connect a DisplayPort monitor to hdmi on my laptop?

I find myself in a similar situation, please some find an answer for this!

7 more replies
Answer Match 46.2%

I purchased a new monitor and desktop and I'm confused as to why I can't get the monitor to connect with a HMDI cord. I know the monitor works fine. I even got it to work with my old computer with a HDMI cord. But when I plug it into this new desktop, the monitor is black with a message that says 'Check Video Cable!'  I'm a little worried that there's something wrong with the desktop itself and it's not booting up properly (which is why nothing is appearing on the monitor) The power button is lit up(plus the bottom of mouse is lit red and the dvd tray opens) but it seems pretty quiet. (I am used to having loud, crappy computers though)  Idk if this helps, but my monitor is a HP Pavilion 23xw 23-inch IPS LED Backlit Monitor and it has 1 VGA and 2 HDMI (with HDCP support) My desktop is a HP ENVY 750 Desktop PC These are the specs-No Secondary HDD2GB AMD Radeon R9 370 [2xDVI, HDMI, DP, DVI to VGA adapter]16GB DDR4-2133 DIMM (2x8GB) RAMWindows 7 Professional 647-in-1 Media Card Reader, 4 USB Ports (Top), Audio [Top 2USB2.0, 2USB3.0]500W Power supply6th Generation Intel® Core? i7-6700 quad-core processor [3.4GHz, 8MB Shared Cache]2TB 7200 RPM SATA 6G Hard DriveHere's a pic of it  Should I  buy a DVI to VGA adapter and try to connect it that way? And if so, does anyone have any recommendations on a good adapter? Thanks in advance!  

More replies
Answer Match 46.2%

Hello,My laptop Lenovo Yoga 3 Pro, windows 10 home:can't connect secound display monitor via HDMI cable.It says: at first there is a sound from laptop that device is connected, but monitor says: "No signal".Tested on two monitors (NOC and new one LG).Tested on new cables.With my old LG 32'' TV it works always.With my old laptop dell it works. Tested solutions:trying to install updates:http://support.lenovo.com/pl/pl/products/Laptops-and-netbooks/Yoga-Series/Yoga-3-Pro-1370-Laptop-Len... - installedhttp://support.lenovo.com/pl/pl/products/Laptops-and-netbooks/Yoga-Series/Yoga-3-Pro-1370-Laptop-Len... - installedhttp://support.lenovo.com/pl/pl/products/Laptops-and-netbooks/Yoga-Series/Yoga-3-Pro-1370-Laptop-Len... - installedhttp://support.lenovo.com/pl/pl/products/Laptops-and-netbooks/Yoga-Series/Yoga-3-Pro-1370-Laptop-Len... - error on internet page - can't see anything to downloadhttp://support.lenovo.com/pl/pl/products/Laptops-and-netbooks/Yoga-Series/Yoga-3-Pro-1370-Laptop-Len... - driver was not recognized Secound sollution:uninstall video card drivers, then install: https://downloadcenter.intel.com/downloads/eula/25620/Intel-Graphics-Driver-for-Windows-7-8-1-10-15-... HDMI monitor still not working. Any idea?Please help,Piotr

More replies
Answer Match 46.2%

Hi there. I have a problem that just presented itself in the last 24 hours. I have previously connected my laptop computer to my HDTV via the HDMI port on a regular basis but randomly as of last night my laptop will no longer acknowledge that the HDMI is connected to the HDTV. I have tested 2 different HDMI cables to be sure they are working properly as well as all 3 ports on my HDTV and made sure the TV was on the correct input. I have not done any updates/installations/uninstalls/deletions/resolutions changes or anything else that could have prompted this issue. I double checked my graphics card drivers, which were out of date but I was able to update them. I have cleaned my registry, did a system restore, checked for viruses/malware/spyware, power drained, and rebooted multiple times.

On, what I would call, a related note... The online game that I play has also started having problems when I run it. This started the exact same time that my laptop's HDMI would no longer connect to my HDTV, hense the belief of relation. The game has become extremely laggy dropping me down to 2-3 fps. I can drop my video settings down to minimum and be lag free, however, I have been playing the game on this same laptop for 8 months on the highest ultra settings with absolutely no problems until whatever occurred last night.

These 2 things lead me to believe it is a graphics card problem. I am currently running NVIDIA GeForce 9400M G. As I said before, I have updated to the most recent ... Read more

More replies
Answer Match 46.2%

Gang
This concerns an HP late-model notebook, Win7 Home Prem x64, used as a desktop with HDMI-connected 1080p 21", plus usb mouse/kbd. The goal is to make this as simple as possible: desktop-like. Just turn it on and work.
It seems that either/both coming out of sleep state or simple shutdown and startup the Monitor stays offline because, I suppose, its getting no signal from the notebook. I tried to duplicate this on a dell notebook in my 'lab' but I only have a vga connect to work with - it just works. in fact I have trouble with the usb port but not with the monitor persisting.

is there a chance there is some interplay between vendor/maker-specific implentations, plus perhaps the embedded Intel HD video controller?

z
 

A:How to make HDMI-connect Ext Monitor persist?

this could be an external device problem, somehow messing up allocation of resources @ boot. my brother has a new i7 super machine, hooked up with a monitor(dvi) and an hdmi bigsceen hooked up as well.
no problems. then he hooked up a firewire card-hooked up to an external mixer, something like that. he had identical/very similar issues. when we troubleshot, i first said eliminate any possibilities no matter how remote.

long story short.

when the external device is powered up his main monitor did not work when coming out of hibernate mode. with it off(not the card just the devise) all is well.

from what i could assertain, didn't sound like your problem. i know this sort of deal does not usually occur with printers and scanners. but it is somewhere to start(or end if nothing else is hooked up in such a fasion).

good luck dude
 

2 more replies
Answer Match 45.78%

Hi I am facing issue with my Laptop (Pavilion G6 model) unable to connect monitor with HDMI to HDMI

More replies
Answer Match 45.78%

when I connect my Acer laptop and HP Pavilion with HDMI cable my laptop picture is going black.Sometimetimes it starts working randomly. My monitor is connected to power at the moment but ON/OFF light on front is off but back of the monitor light is on so power is running through. I have tried my other monitor with same cables and it worked.I would think that something is wrong with monito,r but it seems that it works whenever is wants.Dont know much about computers  so go easy  Much appreciated!

More replies
Answer Match 45.78%

Hi all,

Hoping some one can help me with this. I own the ACER AS3810T laptop and it has one HDMI output. When I connect to my LG 42" LCD TV using HDMI, the screen goes blank and TV says no signal and i have to force shut down in order for the laptop to work again. When I connect to the TV and start the tablet, I can see starting Windows on both screens. Seems once Windows is loaded, I get no signal on the TV from the tablet.

It was working perfectly before i switced from Vista to 7.

The graphics card is an Intel GMA 4500MHD.

In there anything i can do to fix this.

Thank you all for any kind of help.

A:ACER HDMI doesnt connect to TV after changing from Vista to 7

Does it actually say "no signal" on the tv once the splash screen loads?

Also, you need to setup the tv in the Intel HD Graphics console. Click on Intel HD Graphics>Graphics Prperties>Display>Multiple Displays>Operating Mode>Clone Displays.

9 more replies
Answer Match 45.78%

Hello, I have to utlize a dual monitor set-up and I'm connected to my additional monitor via an HDMI cord.  When connected I loose my sound.  Can anyone help me resolve this issue? Thank you,Curtis Jackson

A:No Audio using HDMI cord to connect to external (additional...

Hi, Curtis: See if going into the Control Panel>Hardware & Sound>Sound>Manage Audio Devices>change the setting from the HDMI audio device to the speakers, save the setting and see if you have sound again.

1 more replies
Answer Match 45.78%

Within the last week I have started having this problem with my laptop where I plug it in to my tv with the HDMI cable, I get the video but the sound plays through my laptop. In the sound settings the hdmi says that its not plugged in.
 
I have tried everything including rebooting the laptop with the hdmi plugged in and with it out. I have also tried rolling back and restoring my laptop and i have not installed any new software.
 
The only thing that works is uninstalling realtek audio driver and rebooting my laptop each time play something through my tv. I have tried this on my parents tv and it still happens so its got to be the laptop. The laptop is a custom laptop.
 
Please Help!
 

A:Having to reinstall audio driver every time I connect HDMI

Why not just disable the sound/Realtek function if you aren't going to use it?
 
You can disable it/renable it any time...in Device Manager.
 
No need to uninstall drivers, if disabled.
 
Louis

3 more replies
Answer Match 45.78%

Hi I am facing issue with my Laptop (Pavilion G6 model) unable to connect monitor with HDMI to HDMI

More replies