Tech Problem Aggregator

# "Windows detected a hard disk problem" error message

Q: "Windows detected a hard disk problem" error message

I just began getting this error yesterday. What is the likelihood that another issue besides a failing hard drive is causing error? Secondly, I've already purchased a new hard drive as a precaution. What is the fastest/easiest way to backup/clone this drive?

A: "Windows detected a hard disk problem" error message

Hello,

Please open an elevated command prompt.
When you have the command promt open please enter the following command:
sfc /scannow and press enter.
After the scan is 100% and the scan did repair files please restart your computer.

Please re-open an elevated command prompt and enter the following command:
findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >%userprofile%\Desktop\sfcdetails.txt

The cbs.log file will be posted on the Desktop as the current user, named sfcdetails.txt. Please attach this file in your next post.

Note: You can also copy/paste the commands to make it easier.

1 more replies

Hi,

Recently, an error message "Windows detected a hard disk problem" always pop ups in my monitor.

I have done "Error Checking" also " Defragmentation"...but that error message doesn't disappear.

What should I do?

Thanks a Lot.

A:Error message " Widows detected a hard disk problem"

That is not a most welcome message.

I would immediately backup the most important personal data and run the DOS version of Manufacturer's Diagnostic Utility. If it passes without any event reported, fine. But if it finds bad sectors and even if it repairs it, be wary. Not to be taken aback by any catastrophic failure that may occur unannounced, always backup all your personal data and also image your system regularly.

6 more replies

hello

i have bought a new computer recently and today i got this error message (i think the error is quite famous i will provide a photo if needed) and i have been trying to fix with no luck here is the situation so far.

1) i got the error after updating (it poped up after restarting the computer) the driver for my nvidia graphics card (not sure if this is important) .

2) i've searched around and i couldn't tell if this is a legitimate error or just maleware .

3) i ran check disk and no bad sectors were found .

4) i ran malwarebytes and it didn't find anything.

5) i ran superantispyware and it found and cleaned some threats .

6) i ran seaTools and the drive passed the fix all function .

i have done a complete back up just in case.

how do i fix this problem ?

please inform me if any information is needed and i will provide it ASAP.

i apologize for the long post.

Thank You

A:i need help with fixing "windows has detected a hard disk problem".

If you have made a backup image of your drive - you have done the best thing, just in case.

Are you still getting the message?

4 more replies

My laptop is getting really slow and i cant use browser as it gets slower and hangs a lot. What do i do ?

A:windows error message says " your hard disk is at risk"

16 more replies

Hello, I am receiving this message when turning on my laptop:

It just started appearing today.

I am using a Lenovo ThinkPad Edge E550 i7-5500U 15.6-inch 16GB 500GB SSD AMD Radeon R7 M260 Full HD Windows 7 Pro Business Laptop Computer.

I bought it new 6 months ago but just started using it 2 months ago.  It was very expensive so this error message I'm receiving is troubling.

I google'd and read people saying this is not an actual error message from Windows but its a virus.  I ran both Malwarebytes and ESET 9 virus scan and both programs did not find anything.  I also tried running Malwarebytes in safe mode with networking.  I've also right clicked both C: and Q: hard drives, clicked Properties>Tools and checked for errors on both.  It did not find any errors.

I have backed up all my files onto an external hard drive.

So I really need help.  I don't know if the hard drive actually has a problem and needs replaced or if a virus/malware is causing this popup.  Somebody please help me, thank you.

When I click the "Health" tab within the problem this is what shows:

And when I click the red part listed, this is what shows:

I don't know if that helps or not.  I will now not attempt anything else until I receive some help here, thank ... Read more

A:"Windows detected a hard disk problem" error message

The computer is under warranty...right?  So, that is where you need to go for help...the manufacturer Lenovo.
I think the Windows message is legit. Scam messages would ask you to contact the scammer by phone, etc.

13 more replies

Yesterday when I switch on my computer, it automatic diskcheck on my E disk. I have 3 HDD, which is C: (My main partition, installed Windows on this HDD), D: is for all my game files (Installed games) and E: is for all my music, movies, game installer, software etc.

So back to the point, when I switch on my computer, and get to the "Windows is Starting", and it stuck right there for about 5-10 minutes. Firstly, I have no patient so I restated the computer, and second or third time also have the same problem. So I choose to wait patiently, after 5-10 minutes, it have a black screen for about 1 to a few minutes, then it started the disk check on my E drive.

Once the process started ( I have total 234240 file record as shown on the disk check ) and continue to file record 800, it started to give me message stated "File record segment 800 is unreadable, File record segment 801 is unreadable" and so on, and sometimes it continue to go smoothly without the message, but not long or sooner it will appear again. Almost the whole process I get these message which worried me, and I wonder if my hard disk is failing badly and unable to recover.
It continues to finish the process and attempt to fix the bad sector. And after that it successfully log onto Windows, so I can use it normally again.

But I notice my E: HDD cannot access and the "My Computer" screen is loading very slow, and sometimes goes unrespond. One thing very weird is that after I few hours ... Read more

A:Hard disk is failing? Error message"File record segment is unreadable"

The "File record segment xxx is unreadable" error is an indication of failing hard drive. You should backup the data from this drive before it's too late.

Next, run some diagnostic testing on the failing hard drive; most HDD manufacturers have the diagnostic software available from their website. Software from Seagate will work with most brand.

If this drive would be mine, I'd just get a new one, the drive certainly will not get better...

9 more replies

I have a big problem here,
I have used my hard disk for 9month,
Yesterday when I watched movie on the half way,
My hard disk suddenly disfuntion,
And I thought my laptop problem due to always lagging so I restart my computer.
But after that I can't read my hard disk (WD)in my computer.
It can read in computer management there.

Ways I try:
1)I try to uninstall and reinstalled again,BUT it doesn't work.
2)I try to unchecked the hide folder and device at view.
3)I try to update the software BUT it still disfunction.
4)I try to use disk management and initialized it BUT there appeared CANNOT INITIALIZED Due to I/O device error.

Any solution for me ?

A:Hard Disk can't read in "my computer ", "initialized",I/O device error

The most usual cause is that the Hard Drive is beginning to fail. Back up your stuff. Go to the website of the manufacturer and test the drive.

8 more replies

"A problem caused [name of program] to stop working correctly. Windows will close the program and notify you if a solution is available." But no solution shows. I have been using the same HP Pavilion tx1000 for a year and a half with no software or compatibility issues. I run Vista Home Premium, Service Pack 1 - 32 bit. Slowly this message began to appear with every microsoft program I opened and then started to spread to non microsoft programs. I tried reinstalling the programs, doing a system restore to the oldest restore point I could, I also tried uninstalling any window updates that were installed right before my problems. I have read some strings that indicate it may be a compatibility issue between the service pack 1 and vista but the service pack came with the computer and it has been working fine until recently. I am at loss what to try next. Has anyone using Vista Home Home Premium experience anything like this!!!

A:Windows Error Message "{Name of Program} has stopped working" "A Problem caused ...

hi and welcome the first thing to do is run your anti virus and malware progs this will check for issues there and hopefully rule it out the next thing to try is sfc/scnw http://www.vistax64.com/tutorials/66978-system-files-sfc-command.html its a how to and also try this http://searchenterprisedesktop.techtarget.com/generic/0,295582,sid192_gci1276029,00.html this will check for other problems in both your files and your hard drive

1 more replies

Hi,

I've been having this problem for a few days now. Every time I start up I get this error message Windows - no disk Exception Processing Message c0000013 Parameters 75b6bf9c 4 75b6bf9. Also when I open up task manager the window looks funny i.e. all the tabs disappear and I cannot close it. This thing seems to be slowing down my system.

Raphael

A:Solved: "Windows - No Disk" error message [moved from XP; further malware help may be

8 more replies

I recently burned a couple of CDS (filled with videos and mp3s) and MADE SURE that they worked properly and were burned correctly BEFORE I deleted the videos and mp3s from my computer. Well, I burned about 5 cds. I was checking over some of the CDs and 2 of the burned CDs dont want to work. I get the following error:

"Windows cannot read from this disk. The disk might be corrupted, or it could be using a format that is not compatible with Windows"
Why am I gettin this? Im POSITIVE that the disk was burned correctly but now all of a sudden Im gettin this error. I got Windows XP SP2, Gateway Computer.

A:Error Message: "Windows Cannot Read From This Disk."

Are they in perfect condition?

2 more replies

First of all, i just want to let everyone know that i am not very good with computers so, please bare with me.

Here is my problem, my wife was trying to download pics from her memory card of her camera (sd card) to my computer so that she could burn the pics to a cd. My computer (Gateway GT5016H) has a slot to insert the memory card into the tower of the computer. She inserted the card, retrieved the pics and proceeded to burn them to a cd. When she was done, she shut down the computer.
Now evertime i start the compuer i get an error message pop up "windows-no disk" "there is no disk in drive. Please insert disk into drive." I also must click cancel multiple time to get rid of the error message. Gateway tech's could not help resolve the problem and told me to contact the manufacture of the sd card because they believe there is a compatability issue. I have windows XP if you need to know.

Can anyone help me.

16 more replies

I get this error message whenever I try to run iTunes or load a music CD. I cannot get it to disappear, and end up having to reboot. I have run A-Spyware & A-V software, and have cleaned my register.

I saw a solution to this in forum threads, which referred to using "Hijack This". But the solution required someone else to look at my log file, and then suggest specific actions.

Can anyone help me through this please?

Many thanks.

A:Solved: Error Message "Windows - No Disk"

13 more replies

I've tried frequently documented solution regarding FsDepends where
changing the start reg key from a value of 3 to 0.... doesn't work as this is a common symptom to a different problem.

When using partdisk or the disk management gui I get the error message: "A virtual disk support provider for the specified file was not found"
eg partdisk select vdisk file=c:\my.vdh
There are some statements that some Intel Management Control Software might be knobbing this feature... does anybody know what this installation is doing so that the process can be reversed?
Any other suggestions?
Cheers
Simon

More replies

I can not open my photoshop prom in Windows XP professional, it says No Disk and the exact error message is Parameters 75b6bfc 4 75b6b7c 75b6b7c ? Anyone know how to fix this ? Thank you

A:Windows "No Disk " error message

No need to Post twice, we heard you.
In Photoshop go to File\Preferences\Memory & Image Cache, and set the value of used by Photoshop to 50%. Restart Photoshop. Or if you have another drive, set the Scratch Disk to be on another drive.

1 more replies

has anyone ever received this message??

"windows no disk"

how did you fix it??

A:"windows no disk" error message.

Hard drive error.,more than likely. Go to hdds makers website,

5 more replies

im not completely sure if this has to do with windows but i keep having an error message pop up randomly and i have no idea what it is talking about it says:

"Exception Processing Message 0xc0000013 Parameters 0x75EF92A0 0x00000004 0x75EF92A0 0x75EF92A0"

and it only lets me cancel, try again, or continue, but whatever i do it usually pops up a few more times. can some1 please tell me what the hell it means or just how to fix it?

A:"Windows- No Disk" error message???

hi and welcome maybe this will be useful http://forums.techguy.org/business-a...essing-10.html a lot of options

1 more replies

I can not open my photoshop program in Windows XP professional, it says No Disk and the exact error message is Parameters 75b6bfc 4 75b6b7c 75b6b7c ? Anyone know how to fix this ? Thank you

A:Windows "No Disk " error message

Hi do you have any p2p software on the machine,what av do you have

1 more replies

For whatever reason I have been getting the message "Windows - No Disk" when I log on to my user name. This is really annoying and would like to stop it. If anyone has any suggestion's for solving this problem it would be greatly appreciated!
I have run "hijackthis" and posted the log for review.

Logfile of HijackThis v1.99.1
Scan saved at 8:11:43 AM, on 3/26/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\RunDll32.exe
C:\WINDOWS\system32\CTsvcCDA.EXE
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\nvsvc32.exe
C:\PROGRA~1\TRENDM~1\INTERN~1\PcCtlCom.exe
C:\WINDOWS\system32\HPZipm12.exe
D:\Program Files\Alcohol Soft\Alcohol 120\StarWind\StarWindService.exe
C:\WINDOWS\system32\svchost.exe
C:\PROGRA~1\TRENDM~1\INTERN~1\Tmntsrv.exe
C:\PROGRA~1\TRENDM~1\INTERN~1\tmproxy.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\dllhost.exe
C:\PROGRA~1\TRENDM~1\INTERN~1\PccGuide.exe
C:\WINDOWS\ehome\ehtray.exe

A:"Windows - No Disk" error message

has to do with hp media zone

http://blogs.msdn.com/astebner/archive/2005/11/29/497983.aspx

http://h10025.www1.hp.com/ewfrf/wc/...oduct=1118243&lang=en&cc=us&docname=c00575445

3 more replies

I have Vista Home Premium 64 bit OS and I flashed the Bios using my A1 Suite in Asus to upgrade it and everything went fine but as can sometimes happen I got the message upon reboot that " No Hard Disk Detected ".

Everything is working fine from bootup to shutdown and I know that there is a fix for this...I think in the Bios...but I forgot what it is. Any and all help is very much appreciated. Thanking you all in advance!

My specs are as follows: Mobo is Asus P5Q3 Deluxe WiFi-AP @n LGA 775 ATX Mobo, Intel P45 Chipset, Supports Intel Core 2 Quad CPU's, Dual DDR3 2000, Sata 3Gb/s RAID, CrossFire Ready, PCI-E 2.0

A:" No Hard Disk Detected After Flashing Bios "

Tried rolling back to previous bios?

3 more replies

Hi,
I am trying to install Windows 7 Ultimate 64bit on to a dell xps and having a lot of problems.
The Computer has 3 harddisks
C:\ - Vista (Came preloaded With the Pc when i bought it)
D:\ Vista Recovery 10GB thing (Came preloaded With the Pc when i bought it)
F:\ Empty drive i want to install windows 7 on
J:\ Harddrive for everything else

The problem is when i boot from the disk i can start the installer but when it allows me to choose where to install to the harddrive always comes up as "Can not install blah blah, Windows can NOT boot from this Disk"

I have tried all sorts of ways to get around this like unplugging everything apart from the cd drive and harddrive i want to install it on, im getting really fed up with this. Is the problem that im trying to do a dual boot?
I also read somewhere about getting sata drivers for my motherboard but after hours of searching the web gave up.

All i can tell that my motherboard is is a FOXCONN LS36 but i can't find sata drivers for this anywhere!
On the dell website i tried all of the Sata downloads but if i locate the downloaded file whilst in win7 setup it doesn't like the file.
Am i doing some majorly wrong and stupid here?

Spud

More replies

I just replaced the stock xtremegear psu my computer came with because one day the computer just shut off and wouldn't turn on again.

I replaced it with a corsair gs800. I'm pretty sure I plugged everything in...the 24 and 8 pins into the motherboard, and the pci-e into the graphics card...as well as the fans and the cd drive.

When I turn it on, it goes through MSI's start screen but then it tells me something about No hard disk detected. Then it goes to the MSI screen again and gives me a choice to boot with...but there's only one choice, cd/dvd atapi drive. I choose that and it doesn't work.

I double checked the connections I have plugged in and those are secure. there are lights flashing on the motherboard so that's getting power. That's the 24 pin one right? I also checked the one in the corner, the 8 pin one...seems to be secure. They both clicked in.

Could someone please tell me what I might have done wrong?

Oh and here's the computer information that came with my invoice. Ignore the PSU, it now has what I said.

KB-152-101 BLACK XTREME GEAR MULTIMEDIA/ INTERNET USB KEYBOARD 1 0.00 0.00
MO-115-101 BLACK XTREME GEAR OPTICAL USB GAMING MOUSE 1 0.00 0.00
CU-197-206 INTEL i7-960 3.20GHZ 8M 1366 RETAIL 1 1,209.00 1,209.00
HD-403-306 1TB SATA III 7200 RPM 3.5" HARD DRIVE 1 0.00 0.00
RM-317-401 KINSTON HYPER X DDR3/1600MHz 2 GB MEMORY 6 0.00 0.00
FA-WATER-101 ASETEK 510LC 120MM WATERCOOLER 1 0.00 0.00

A:"No hard disk detected" on boot up

try to replace the cable of your Hard disk drive......

3 more replies

Ok, I built a PC a month ago and everything seemed find no problems of any sort. The other night I defragmented my hard drive and shut it down and turned it on today to a memory test and the message "Disk Boot Failure, Insert system Disk and press enter"

The computer has access to the XP pro w/ sp2 disk only as a boot device but it will not recognize it now.

I have set Cd-rom as 1st for boot sequence then hard drive I have no floppy drive and the bios has been configured to know that.

I am not sure if this means anything but in the bios the IDE Channel 0 Master says none and when I try to turn on auto detection it wont detect a hard drive.

The HDD is fully connected and has not been touched since I installed it a month ago.

I have this awful feeling that I fried the HDD when I defragmented it last night.

Any help would be very much appreciated. But please be simple this is my first build and my knowledge at this sort of thing is very very sketchy at best.

A:Error message "Disk Boot Failure, Insert system Disk and press enter" on first build

The first thing to do would be to get a new data cable for the herd drive and see if that fixes it, they are nice and cheap nowadays.

4 more replies

I keep seeing this error.. "Windows is having a hard disk problem." And it basically prompts me to backup my data, like I am about to see an impending hard drive issue. I found some threads on other forums, but found nothing conclusive. Any ideas. This is a pretty new hard drive, and it is a new install of windows 7. There is also another older drive connected to the system, that contains all the older files, which I have moved over to the new..

Need to confirm which drive is having the issues, if it is indeed having issues, or if there is something I can look into to resolve some sort of software related issue that is causing the problem.

A:"Windows is having a hard disk problem".. pops up..

Will add.. The OS seems to be running very smooth, and does not seem to be having any problems..

5 more replies

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies

hi
som times my os stope and show this message
a problem has been detected and windows has been shutdown
and when i restart os it work correctly
i dont have any problem whit this pc befor this

os : win 7 32bit
ram 2*2gig
cpu core i3-2100

A:help to fix error a" problem has been detected and windows"

This stop error means that your ntfs file system is corrupt (damage in the file system, bad hard drive data, corrupt SCSI or IDE drivers or a corrupt ntfs.sys file).

1, If you still can access Windows, try to disable any backup programs, virus scanning programs or disk defragmenter tools. Try also to run a hardware diagnostics tool to detect any errors your hard drive might have. Also I would advise to run the chkdsk command in command prompt "chkdsk C: /r/f

4 more replies

I am getting the following error message.  It doesn't sound good.  Any help would be greatly appreciated. Thanks!

Windows detected a hard disk problem.

Back up your files immediately to prevent information loss, and then contact the computer manufacturer to determine if you need to repair or replace the disk.

- start backup process

A:getting message saying "Windows detected a hard disk problem"

Do you have a backup to an external drive ?

27 more replies

i need help! whenever i open ie a page that says "warning! spyware detected" appears which directs me to something like an "internet-options" website. there is also this annoying popup about "american green card". i already used spybot and adaware. here is my hijackthis log.thank you very much!

Logfile of HijackThis v1.98.2
Scan saved at 9:39:38 PM, on 12/16/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\WINDOWS\System32\RunDll32.exe
C:\WINDOWS\System32\khooker.exe
C:\WINDOWS\System32\carpserv.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\HP\hpcoretech\hpcmpmgr.exe
C:\Program Files\Hewlett-Packard\HP Software Update\HPWuSchd.exe
C:\WINDOWS\System32\hphmon05.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\NetPumper\NetPumperIEProxy.exe
C:\WINDOWS\yvdhmlvh.exe
C:\WINDOWS\system32\ntnut.exe
C:\Program Files\WinZip\WZQKPICK.EXE

More replies

i need help! whenever i open ie a page that says "warning! spyware detected" appears which directs me to something like an "internet-options" website. there is also this annoying popup about "american green card". i already used spybot and adaware. here is my hijackthis log.thank you very much!

Logfile of HijackThis v1.98.2
Scan saved at 9:39:38 PM, on 12/16/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\WINDOWS\System32\RunDll32.exe
C:\WINDOWS\System32\khooker.exe
C:\WINDOWS\System32\carpserv.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\HP\hpcoretech\hpcmpmgr.exe
C:\Program Files\Hewlett-Packard\HP Software Update\HPWuSchd.exe
C:\WINDOWS\System32\hphmon05.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\NetPumper\NetPumperIEProxy.exe
C:\WINDOWS\yvdhmlvh.exe
C:\WINDOWS\system32\ntnut.exe
C:\Program Files\WinZip\WZQKPICK.EXE

More replies

Hello!

I have been getting a really annoying error lately every time I reboot.

The error message "Windows Explorer has encountered a problem and needs to close. We are sorry for the inconvenience" appears a few minutes after start-up.

I click "To see what data this error report contains, click here." and it shows this:

AppName: explorer.exe AppVer: 6.0.2900.3156 ModName: ws2_32.dll
ModVer: 5.1.2600.2180 Offset: 0000664d

I have run Spybot S&D, Ad-Aware Professional and Trend Micro OfficeScan but i still get the problem whenever I restart my computer.

Although my windows seems to be working properly after I click "don't send report" (due to restore settings?), the error message annoys me every time i restart my computer.

What shall I do to repair the problem? Please let me know if you need my HJT log. Thank you and I hope to hear from you soon!

Kaye

A:Start-up error message: "windows has encountered a problem & needs to close"

The next time the error dialog opens, use [Details] to get the exact Error Code and description.

Now see: Windows System Error Codes

You should bookmark the above site AND Microsoft Stop (BSoD) Codes

2 more replies

Occurs at start up. Ran S&D, Adaware and AVG. Ran HiJackThis in safe mode. What do I do next? Thanks.

Logfile of HijackThis v1.99.1
Scan saved at 9:20:00 PM, on 10/31/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\HiJackThis\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.gateway.com/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.gatewaybiz.com
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.gatewaybiz.com
R1 - HKCU\Software\Microsoft\Internet Connection Wizard,ShellNext = http://www.alias.com/cgi-bin/activat...nlimited%206.5
O2 - BHO: PBlockHelper Class - {4115122B-85FF-4DD3-9515-F075BEDE5EB5} - C:\PROGRA~1\NETSCA~1\NETSCA~1\pbhelper.dll
O2 - BHO: (no name) - {53707962-6F74-2D53-2644-206D7942484F} - C:\Program Files\Spybot - Search & Destroy\SDHelper.dll
O3 - Toolbar: AOL Toolbar - {4... Read more

A:C:\WINDOWS pops up and Error message:"Problem with FireDaemon.exe"...

I also disabled the three FireDaemon processes in the Services window per advice I read in another thread.

7 more replies

My Dell laptop is displaying this message upon booting up. I have no idea how to start fixing it or figuring out whether it is fixable.

My dell charger is worn out, and the computer has not recognized it -- it still gets power to the computer, but the computer does not recognize it as a dell charger, and therefor I can run the computer on AC power but it cannot charge. I haven't needed to use my laptop out of my house in awhile so I haven't really worried about it, but can the fact that the battery has been totally drained for awhile (about a week, I think -- and totally drained, if I unplug the charger it turns off immediately) have something to do with it? I have it on a working charger right now trying to revive the battery, but the battery light is not on so I don't think it's even charging.

If trying to charge it doesn't help, what do I do? I can still run setup and the boot menu but I have no idea what to do when running these.

A:HDD Error - "Internal Hard Drive not detected"

"My dell charger is worn out, and the computer has not recognized it"...

Your post is confusing. Are you talking about the AC adapter (charger) here? If the charger isn't being recognized by the laptop, how is the charger able to power the laptop?

The laptops internal battery is probably dead. They don't last forever. What about this " HDD Error - "Internal Hard Drive not detected"...?"

This means that there is something seriously wrong with the hard drive. This hard drive stores all your data, pictures, email and Operating System

1 more replies

Greetings everyone.
Last Tuesday when I turned my computer on, I got the message “A disk read error occurred, press crtrl+alt+delete to restart”. Since then I have been searching online for a way to get my computer back up & running.
The specs of my computer:

Dell Inspiron 9100 Notebook
Windows XP Pro SP3
P4 @ 3.2 Ghz w/ Hyper Threading
1 gb Memory
160 gb Western Digital PATA/IDE HD
(Replaced original 80 gb HD in May 08 b/c too small)
Removable internal DVD/CD-RW drive (& a removable internal floppy disk)
Purchased in Oct. 04.

When I installed the new HD back in May, I used Apricorn EZ Gig II & the included HD enclosure to copy the contents of the old HD onto the new one.

I first ran the onboard Dell diagnostics; it did a full system scan (from the processor to the memory to the HD) it told me everything was fine.
I then ran the WD hard drive utility from a floppy disk. I ran both the quick & full tests and it told me there were no problems.

Since the HD seems to be alright, I’ve been wondering if something has corrupted the Master Boot Record. I do my best to keep my system in check; security-wise I run Norton 360 2.0 & Ad-Aware 2008 (there’s more I can do though, I know). I don’t think it could be malware, but who knows.

Anyways, I’ve tried booting from my Windows CD to get to the Recovery Console or do a repair installation, but things hit a snag. The drive spins up & I get a message telling me setup is preparing files, but then the scr... Read more

A:Windows XP "Disk Read Error Occurred" Problem, difficulty in resolving...

6 more replies

Hi

I keep getting the above error message everytime I start Windows or try to use Ad-Aware or Spybot - Search & Destroy. It also states "There is no disk in the drive. Please insert a disk into drive."

I used to insert a DVD into the drive and sometimes it used to work but not anymore.

Hope you can help!

A:Error message "Windows - No Disk" on Windows XP

16 more replies

When I go to the Winows XP Media Center I get the error message "There is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR3.".

When I first set up Media Player about 8 months ago I got this error message and doing a search I was able to find a fix. Then I had a problem about a month ago and reformatted my hard drive and did the same thing and found a fix.

Well, just had to reformat again and now I can't remember where I found the fix. Can someone help me?

Thanks! Oh - and BTW can someone tell me how I can find where the programs that I recored are stored.

GarysMom

More replies

I'm a computer lab assistant at Missouri State, and I always work on one of the two computers behind the desk. Both of the lab assistant computers have the same problem, but none of the others in the lab do.

I am on a computer running Windows XP Professional Version 2002 with SP3 installed. I only get the "no disk" Error Processing message when I start Firefox. Any suggestions?

(note: I have also attached a copy of this error message, if it will help)

A:"no disk" Error Processing Message upon starting Firefox

9 more replies

Hi, I'm having some trouble in the GIMP, especially when opening or saving files. Going to the C: drive goes fine, but when I go to a following directory, I get the "No Disk" error message, telling me to insert a disk into "the" drive. Whichever that may be.

If that were all, it wouldn't have been a great deal. But whichever button I press in the error message, it just pops up again. And again, and again, and again... This is seriously bad for one's nerves. Of course, I tried to click very rapidly, and eventually it does stop, if you're lucky enough not to click once too many. Because chances are you click on the save or load dialog, then the message pops up, and you can start all over again! I tell you, it's only a matter of time before I have a mental breakdown.

I was actually uncertain as of in which forum to post, as I suspect this could be a Windows problem as well. You see, whenever I stick a USB stick into my computer, the drive letter assigned to it isn't the next one unused. Instead, it skips one. So perhaps my computer thinks there's one more drive - one without a disk in it - while there really isn't. That's just an idea though.

I'm using Windows XP SP2, GIMP 2.2.10 and GTK 2.8.9. Both are the latest version, and there is no mention of a "No Disk" message in GIMP's Bugzilla.

Any help would be greatly appreciated, of course!

A:Solved: "No Disk" error message in GIMP

bump..

3 more replies

After formatting I keep getting error message "Invalid system disk
Replace the disk, and then press any key"

I use this drive for an old PC that was running Xubuntu but now want to reinstall Win 7 after I went complete Linux on my main machine. I know it works. Every article online says the drive is either dead, infected, or whatever. I'm also booting from a flash drive, another thing I read is it's trying to boot from CD instead of USB and change boot order to fix, obviously that's what I'm already doing.

It's formatted fat32 with MBR. Any ideas what to do?

Thank you.

More replies

I receive daily a "Low Disk Space" error message which is incorrect and in my estimation fradulent. It goes on to give an alternative to rectify this situation by offering to "Speed up your computer and remove all viruses that are on your computer." Of course all of this is for a price. If you opt in and then change your mind before you totally commit they offer the same package for half price. I refuse to be "sucked in" by this fraudulent company.

I have gone to the internet to try and find out how I may get rid of this enemy. I have used Malwarebytes, Microsoft Security Essentials and Microsofts Security fix program all to no avail. I am at my 'wits end' trying to rid my computer of this plague. This is the url that the message comes through as. I cannot find out any source that will identify its origin: http://static.salesresourcepartners.com/g/?z=1&ilmernzkvtaztu=002618B38EDC0810&pu=cGlja3VwaG9ja2V5LmNvbQ==&s=iexplore&nm=ilmernzkvtaztu&t=aHR0cDovL3d3dy5waWNrdXBob2NrZXkuY29tL2ZvcnVtL3RvcGljLmFzcD9UT1BJQ19JRD0yODIzNw==&r=1

I need help.

Thanks,

Doug. Bell

A:Fake "Low Disk Space" error message

16 more replies

Hello,

1) At boot up, my computer will prompt with the "Windows - No Disk" error message. I try to cancel each time and usually by the the third cancel it finally goes away.

2) Internet Explorer 6 will freeze with the "hungapp" error message. I have to do a CTRL+ ALT+ DEL to close. This happens quite frequently and just about makes IE 6 unusable.

Any ideas as to what can be causing this? Below is my HijackThis log:
=====================================
Logfile of HijackThis v1.99.1
Scan saved at 22:11:43, on 1/20/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Belkin\Bluetooth Software\bin\btwdins.exe
C:\Program Files\Yahoo!\Antivirus\ISafe.exe
C:\WINDOWS\System32\snmp.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Belkin Bulldog Plus\upsd.exe
C:\Program Files\RealVNC\VNC4\WinVNC4.exe
C:\WINDOWS\system32\MsPMSPSv.exe
C:\Program Files\Yahoo!\Antivirus\VetMsg.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOWS\Dit.exe
C:\Program Files\Lexmark X1100 Series\lxbkbmgr.exe

A:Windows "No Disk" error at boot and "hungapp" error with IE 6

Click Run, type in msconfig, click OK, click Startup tab find dit.exe and uncheck it, click apply and reboot system. This worked for me with "No Disk" problem

1 more replies

Hello,

I need help with this Diskette issue please. "Diskette Drive 0 Seek Failure"
I've had this problem a few times in a couple of years and I have been able to fix the error by pressing F2 and going to the SETUP. And I've done this with no issues. But this time I thought I fixed it but now I get this new error: "A disk read error occurred Press Ctrl+Alt+Del to restart". After I press Ctrl+Alt+Del it takes me back to the same error massage "A disk read error occurred Press Ctrl+Alt+Del to restart". Need help please. This is a Dell Desktop, Windows XP.
Thank you.

Sue

A:"Diskette Drive 0 Seek Failure" Error Then "A disk read error occurred Press Ctrl..."

9 more replies

My computer persistantly displays this error message saying "Windows - No Disk: There is no disk in the drive. Please insert a disk into drive." When I look at the My Computer screen It shows my floppy drive, my C drive, the unknown Removable Disk Drive (D:), CD drives E and F, my other internal drive (G:), my external (H:), the second partition on my internal drive (I:), a DVD drive (J:), and then finally the second unknown Removable Disk Drive (K:). I have no idea what these Removable disk drives are or how they got here but I think they are causing the problem. Windows thinks there is a disk mounted but there isnt. If it helps the applications I was using at the time of when the incident first began was Azureus, my DVD drive, Divx Player, iTunes, and maybe some more random stuff. This error message pops up whenever I open multiple programs such as iTunes and Azureus. I could REALLY use some help with this as it is starting to become very annoying!

A:Keep getting error message saying "There is no disk in the drive"

right click on my computer then manage. click on disk management and see what it specifies K:\ as. you can right click and goto properties to get a list of drives attached and maybe it'll give you more specs on this removable drive.

is is possible you installed some software from a removable disk (like a usb key) and the software you are running is looking for the source media? it's possible this new drive has nothing to do with the windows error

6 more replies

On one system I am getting this error message once every day or two. The hard drive has over 300GB available. The verbatim error message shows nothing in Google.

"The space on the hard drive is running low. Currently only xMB is free. Please free space by deleting unused files."

Now it shows 71MB free. Any thoughts?

A:Error Message "The space on the hard drive is running low" isn't true

so do you have 300 gb? or only 71 mb? because if its 71 mb, u have got some major cleaning to do. I doubt that though, some viruses clutter the hard drive. If you have plenty of room, and your still getting the message then you can follow these instructions to remove the annoying message.

Low Disk Space Warning in Vista - Vista Forums

1. open regedit
2. go to HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer
3. Right click explorer and then select new then DWORD (32 bit value)
4. name it NoLowDiskSpaceChecks
5. right click it and press modify
6. change its value to 1 in hexadecimal form then press ok
7. log out and back in and message should be gone.

9 more replies

Brand new Vista user on a brand new Dell Inspiron 530.
Migrated yesterday using Laplink's PCMover (great experience), but have been getting a pop-up WIndows - No Disk error message.

I google for help and found a similiar problem here on your forums. The guy was asked to post a HiJack This log. Mine is below. I would so appreciate any help you can give me to get rid of this nuisance window....and an explanation of what it is, if possible.

Do you need the Parameters given on the error message?
I'll try to attach a "snag" of it.

Thank you,
Janene

Logfile of HijackThis v1.99.1
Scan saved at 6:26:09 PM, on 1/13/2008
Platform: Unknown Windows (WinNT 6.00.1904)
MSIE: Internet Explorer v7.00 (7.00.6000.16575)

Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\Windows Defender\MSASCui.exe
C:\Windows\RtHDVCpl.exe
C:\Windows\WindowsMobile\wmdc.exe
C:\Windows\System32\rundll32.exe
C:\Program Files\InkSaver\InkSaver.exe
C:\Windows\System32\rundll32.exe
C:\Program Files\Maxtor\OneTouch\Utils\OneTouch.exe
C:\Program Files\Pure Networks\Network Magic\nmapp.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\Program Files\Grisoft\AVG7\avgcc.exe
C:\Program Files\Windows Sidebar\sidebar.exe
C:\Windows\ehome\ehtray.exe
C:\Program Files\SlickRun\sr.exe

More replies

I've tried system restore and got this message:
Windows detected file system corruption on OS (C:). You must check disk for errors before it can be restored.). So down below of that message, there's a link which says ''Check the disk for errors''. So I clicked on it, and then it says ''Windows can't check disk while in use, do you want to check for hard disk errors the next time you start your computer?''. So I agree to it by clicking ''Schedule disk check''. So then I restart my computer & and it does nothing at all. I wanted to try system retore because theres this pop-up that keeps accuring on my Internet screen (Google Crome,Internet Explore) that says ''Please Install Flash Player Pro To Continue'', and saying that It's outdated. But when I did try to install it, It wouldn't let me. Comes to find out, I THINK (Idk) it's like some type of virus. But I was just wondering on why my computer wont allow me to restore now? What should I do??

My computer: Desk Top (Windows 7) Hp S1933
(I'm super slow when it comes to computers, so please bear with me!)

A:Error: "Windows detected file system corruption on OS (C:). You must check disk for e

Hi, go to start search and type, cmd, right click on the returned cmd.exe and select "run as administrator" at the command prompt copy paste the following:-

reg query "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager" > 0 & notepad 0

1 more replies

My hard drive not showing in "my computer" or "Disk Management" but is showing under device manager. I got the hard drive from a friend and his dad had put a Password encryption on it. Any Ideas?

More replies

Hi guys. I'm new here. I've tried to read all the discussion about how to fix the unallocated hard drive but I just can't understand it as the cases were pretty much different than I'm facing of.

Here's my problem.
Yesterday my external hard drive seems normal, everything is fine, until there's a blackout and I have to put "sleep" to my laptop. After the power got back, the hard drive suddenly gone and when I check the list of drives under "Disk Management", it showed up as "Disk 1 - Unallocated".

(I've attached screenshots here for your viewing)

My external hard drive is WD My Passport 1TB. It contains a lot of valuable data I cannot afford to lose. I really hope there's a way to fix this, and once I get back all of those precious data I will buy another HD to transfer them ASAP because I cant let this happen to me again.

Your help is so, very much appreciated.
Any questions regarding my problem, let me know. I'll provide all of the details you guys need.

NOTE
1) I've tried TestDisk but on the "Analyse" process, it says "read error"
2) I've changed cable, but the situation remains the same.
3) I've tried Recuva, but it doesnt recognize my external drive.

A:WD EXTERNAL HARD DISK 1TB suddenly "unallocated" and "not initialized"

Hi!

First don't mess up with the WD drive settings.. download partition wizard 7 (its free)..then .. open it ..click wizard(menu) .. select partition recovery wizard.. and it will find the partitions on it i think.. that way you can recover your partition that has been lost.

9 more replies

Yet from the same partition i'm able to boot into a "dual boot type install" of LUbuntu which im using just fine right now
On my other hard drive with a windows 10 install. check disk reports NO errors

Trying to boot from the windows 7 install dual boot begins booting but almost instantly kicks to an old style loading bar then goes to startup repair
and it fails with the problem being "bad hard drive"

but somehow it LUbuntu has no problem booting when i select to boot from it instead of windows 7
all of my data MUST be intact because otherwise i wouldn't be able to boot at all. and i can see all the files on my drive just fine

When I tried to boot in safe mode. it stopped after a few system files were loaded then went to startup repair. I dont remember the file it stopped at.

I have no idea how to solve this??
Is there some way to do a full repair of windows 7? not just the silly startup repair?

This is a very urgent frustrating and serious problem

More replies

I have a new Gateway laptop and all last week I was using it to connect to my home pc using Remote Desktop. I noticed a few times that after shutting the lid to the laptop and walking away when I would come back and open the lid the laptop would be froozen. I wonder if it was becuase I was leaving the remote desktop connection open and then the laptop would go into sleep mode and it woudnlt wake up properly?? Either way the only way I could unfreeze it was by restarting the lapt by forcing it to power down. Well, the last time it happened after I held the power button and forced a shut down when I powered it back on it said "Disk Read Error". I have yanked the drive and connected it via usb to my dekstop pc. The drive shows up in disk management but has a red circle in the top left hand corner of the partition and doesnt' show up in my computer. I put the drive back in the laptop and booted of an XP CD and choose the "repair" option. I tried to do a "MIXMBR" but got a return message that NO partition could be found. Does anyone have any ideas how I can recover from this?? I have Acronis disk director suite installed on my desktop pc and I can reconnect my laptop hard drive to the desktop pc but I don't know if it can do the job. Does anyone have any ideas I really can't afford to loose my data. Please Help.

A:SATA Laptop Hard Drive "Disk Read Error"

This thread can be closed as #1 the issues has been resolved and #2 it doesn't look like anyone will be repying anyways.

Now, in the case that someone does stumble onto this thread here is an update....
Turns out the hard drive was physically damaged (or so I'm told). Since there was sensitive data on the drive I was being extra cautious and after removing the drive and connecting to another pc and seeing the drive but not the partitions or data I didn't even try FixMBR or anythinhg else becuase I didn't want to take the chance of further damage. I took the drive to a data recovery specialst who was able (for a small fee ofcourse) to recover the data. Since the laptop is still under warranty I took it into the store I bought it and told them the sit. Tehy gave me a new hard drive on the spot and I have now restored it back to normal. Thank You all and goodnight.

1 more replies

Hey guys, I need one of you hardware geeks to help me here. I finally bought the Maxtor DiamondMax10 hard drive. Its SATA 300 Gig with a 16 Meg Cache and NCQ. I already have a SATA WD Raptor as my main drive and trying to install this one has a data drive. I have an Asus PW5D2 Premium Board.

When I boot up, it takes a long time (about a minute) to do anything than I eventually get a "Hard disc error" and I have to hit F1 to continue. The BIOS recognizes the drive, but Windows does not. I've swapped out the cable and tried a different controller, same result. While I have like 10 hard drives laying around, they are all PATA--no SATAs to try.

I think the drive is damaged. I downloaded Maxtor's PowerMax, but its worthless--goes through some tests and the inital ones pass and later ones fail, but its the same thing on the other drive (the Raptor) and that one works fine. Tells me eventually to contact Maxtor Tech Support on both drives!

Any ideas?

A:Getting "Hard Disk Error" on second SATA data drive

10 more replies

This is kinda long and I've fixed it, but could use your input.

So after waking up, my parents informed me that the computer was shutting down randomly. I turned it on and "a disk error occurred press ctrl+alt+del to restart " appeared. It's a Sata hard drive so I checked the cables to make sure they were plugged in correctly and they were, and then I tried connecting it to another computer with that computers cables and that didn't work either.

My parents not wanting to buy one online, decided to just go to bestbuy and buy one there, since we already had the Windows 7 Disk at home. I formatted it, partitioned it, and installed Windows 7 Home Premium on it and everything worked. I decided to connect the Hard drive that didn't work while the computer was still on, and it immediately started downloading the drivers it needed and up popped all the hard drive. I'm going to start transferring all the important things like music,videos and games, and after, all I can see are the following 3 things;

after getting all the data we want off it, should I reinstall windows to see if my other computer will recognize it (Even though it couldn't before), format it and just use it as extra data (though since it already couldn't boot up, the ability to keep data on it may fail in a couple of days/weeks) or just put it away and not use it at all.

What would you guys reccomend I do?

A:Hard Drive, "a disk error occurred press ctrl+alt+del to restart "

First get the data you need off it.

Then go to the mfr and get their HD testing utility and run it.

If it were me I wouldnt trust it. I have been burned before.

You certainly could use it for storage of, say one set of backups, for the chances of losing your OS HD, and that backup at the same time are nil.

3 more replies

My Windows 7 configuration is relatively bullet proof (ha ha, nervous laughter).

My OS and programs are on C, which I image using RDriveImage every month after Patch Tuesday.

My data is on software-mirrored D/F drives.

So as long as I don't have a catastrophic event affecting my computer, a routine "drive failure" should be recoverable, with the worst-case being I'd be out a month of updates, but with a good recent image of the OS drive.

Anyway, I was recently looking at my event viewer and I have "Disk errors" that occur whenever I run a full image of C.

The complete error text is:

Quote:
Log Name: System
Source: Disk
Date: 7/13/2012 3:38:44 PM
Event ID: 11
Level: Error
Keywords: Classic
User: N/A
Computer: xxxxxx
Description:
The driver detected a controller error on \Device\Harddisk3\DR3.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Disk" />
<EventID Qualifiers="49156">11</EventID>
<Level>2</Level>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-07-13T19:38:44.199218700Z" />
<EventRecordID>136049</EventRecordID>
<Channel>System</Channel>
<Computer>xxxxx</Computer>

A:"Disk error" invisible except to event viewer, when imaging hard drive

Try going into your BIOS to see what it has to say about the drive. Some BIOS's can read the drive's SMART status and can run tests on it. You could also download the disk manufacturer's drive diagnostics to check it out. Or see what Seatools (from Seagate) has to say about it:

SeaTools | Seagate

9 more replies

Hi,

"pri master hard disk: s.m.a.r.t. command failed
Press f1 to continue"

I get the above error when I turn on my computer, but when I load windows after pressing f1 everything seems to be fine, do I need to worry about this? It started occuring after I installed my q6600 cpu last night.

A:"pri master hard disk: s.m.a.r.t. cmd failed" error

If your drive or PC is still under warranty, I would have the drive replaced. The SMART diagnostics are used to tell you if the drive is running outside of the specs designed by the manufacturer. If the drive goes outside the specs, then there is usually a 72-hour timeframe before the drive fails completely.

But with the error you are getting, it sounds like it's an error with the SMART diags themselves - which should be replaced anyway.

3 more replies

Hi;
Had a sudden inability to go much further than a third or forth-level download on ANY given webpage and then PC would seize-up, requiring "cont+alt+del" in order to get freed-up. Thought perhaps I picked-up a bug of some sort during a recent google search, and went immediately to Panda and Trendmicro to perform both virus as well as malware scans. While the Panda scan was loading-up, I received the following error message....

... " DoPatch....dll reports error....Error "C:\WINNT\patch.utp"....unreadable or not a patch file..."

Was able to complete both scans. Nothing found other than tracking cookies.

I then did a file serch for the above and located it. It was installed TODAY apparently, and not by me, within minutes of the problem starting.

I'm guessing someone/thing slipped this patch into my WINNT file or modified it while I was doing the google search, so I have included a HJT scan below.

Hope this all makes sense and ties-out to something. Any help would be genuinely appreciated-
thanks
Webz

__________________HIJACK SCAN BELOW__________________________
Logfile of HijackThis v1.99.1
Scan saved at 12:42:23 PM, on 5/11/2005
Platform: Windows 2000 SP4 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\system32\LEXBCES.EXE

A:"DoPatch" error message - "dll reports error" causing pc to seize-up (HJT attached)

Bump for HJT expert

1 more replies

Been receiving the following error all the time. I am using Windows XP Home SP3. "Windows - No Disk 'Exception Processing Message c0000013Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c'"

I have viewed multiple forum histories and there seem to as many "fixes" as google ads.

I trust this group most. Any ideas how to get rid of this problem?

Thank you!

A:Windows - No Disk "Exception processing message c0000013"

Try this: http://www.techsupportforum.com/f10/...rs-160996.html

1 more replies

I keep getting the "Windows - No disk" message when running Spybot or Adaware. I went to HijackThis and did a system scan and got a log file but I need someone knowledgeable to look at it and tell me what to check and fix after I run a "system scan only". I ran Spybot in Safe Mode and didn't get the pop-up. Any help will be much appreciated. Here is the logfile:

Logfile of HijackThis v1.99.1
Scan saved at 2:53:26 AM, on 3/18/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
H:\WINDOWS\System32\smss.exe
H:\WINDOWS\system32\winlogon.exe
H:\WINDOWS\system32\services.exe
H:\WINDOWS\system32\lsass.exe
H:\WINDOWS\system32\svchost.exe
H:\WINDOWS\System32\svchost.exe
H:\WINDOWS\system32\spoolsv.exe
H:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
H:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
H:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exe
H:\WINDOWS\Explorer.EXE
H:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
H:\Program Files\Java\jre1.5.0_06\bin\jusched.exe
H:\Program Files\Common Files\Real\Update_OB\realsched.exe
H:\Program Files\iTunes\iTunesHelper.exe
H:\WINDOWS\system32\RunDll32.exe
H:\Program Files\OpenOffice.org 2.0\program\soffice.exe
H:\Program Files\iPod\bin\iPodService.exe
H:\Program Files\OpenOffice.org 2.0\program\soffice.BIN
H:\Program Files\Mozilla Firefox\firefox.exe
H:\Documents and Settings\Charles Eldredge\Desktop\HijackThis.exe

More replies

Hello,
I'm trying to install Windows 7 64bit to HP dc7800 Ultra slim desktop PC from USB flash drive (since PC hasn't got CD/DVD drive). At the partition selection step I get message "Windows cannot copy files to this disk".

I've tried the following:
format HDD and create partition table with DISKPART via win7 disk command promt,
format HDD and create partition table with GParted (creating to primary patition: ~50 GB NTFS '"WIN7" and ~100 GB NTFS "DATA",
wipe all data from HDD writing random data,
create bootable USB flash with different tools (Windows 7 USB/DVD Download tool, Novicorp WinToFlash),
memtest86+ both operating memory modules (2 x 2GB) for 6 passes,
leave only one module connected to motherboard (with each),
reset CMOS setting in 3 ways (via BIOS, removing power cable and CMOS battery, pushing CLR_CMOS button on motherboard),
set HDD as the first boot device
but nothing helped.

I've searched in BIOS for different HDD emulation modes (AHCI, IDE), but the only present setting present:
Storage -> Device Configuration -> Hard Disk (SATA0):
Emulation type: Hard Disk, None,
Multisector Transfers: 8, 16, Disabled,
Translation Mode: Off, Automatic, Bit Shift, LBA Assisted, User.

What can I do? Your help is appreciated.

UPD:
Tried removing USB flash key and refresh the partition list in partition selection menu. Didn't help.

A:Yet another "Windows cannot copy files to this disk" message

Work through these steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums

9 more replies

Hi, i've came here before to know how to do a clean install of windows 7 but now i have an issue, when i booted my computer up and logged on i got a message saying "Disk faliure back up immadiatley" why is this? I dont know if i posted this on the right thread but someone please help me. Thanks

A:Reinstalled windows 7, now i've gotten a "disk faliure" message.

Quote: Originally Posted by LaurenTrumpe

Hi, i've came here before to know how to do a clean install of windows 7 but now i have an issue, when i booted my computer up and logged on i got a message saying "Disk faliure back up immadiatley" why is this? I dont know if i posted this on the right thread but someone please help me. Thanks

You would do well to follow the instructions for it sounds like you have a HD on the verge of failing.

Probably just co-incidental that you just did a clean install.

After you back up run a chkdsk to check the HD status.

A- CHKDSK /R /F:

Quote:
Run CHKDSK /R /F from an elevated (Run as administrator) Command Prompt.

Do this for each hard drive on your system.

When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter.

Then reboot and let the test run.

It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors.

See "CHKDSK LogFile" below in order to check the results of the test.

B- Elevated Command Prompt:

Quote:
Go to Start and type in "cmd.exe" (without the quotes)

At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"

C-CHKDSK LogFile:

Quote:
Go to Start and type in "eventvwr.msc" (without the quotes) and... Read more

9 more replies

Hi, i've came here before to know how to do a clean install of windows 7 but now i have an issue, when i booted my computer up and logged on i got a message saying "Disk faliure back up immadiatley" why is this? I dont know if i posted this on the right thread but someone please help me. Thanks

A:Reinstalled windows 7, now i've gotten a "disk faliure" message.

why did you do the same post twice but in different sections o_O???? This isn't going to get your problem resolved any faster......

4 more replies

This message comes up on starting Windows XP and has to be clicked on 8 times to go away.

Using HijackThis 1.99 I did a scan and received this report:

Logfile of HijackThis v1.99.1
Scan saved at 7:42:27 AM, on 3/23/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\wltrysvc.exe
C:\Program Files\Common Files\Softwin\BitDefender Communicator\xcommsvr.exe
C:\Program Files\Common Files\Softwin\BitDefender Scan Server\bdss.exe
C:\Program Files\Java\jre1.5.0_02\bin\jusched.exe
C:\Program Files\3B Software\Windows Registry Repair Pro\RegistryRepairPro.exe
C:\Program Files\Java\jre1.5.0_02\bin\jucheck.exe
C:\Program Files\eFax Messenger 3.5\J2GDllCmd.exe
C:\Palm\HOTSYNC.EXE
C:\PROGRA~1\INCRED~1\bin\IMApp.exe
C:\Program Files\Softwin\BitDefender8\vsserv.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\System32\bcmwltry.exe
C:\Program Files\Internet Explorer\iexplore.exe

More replies

Hi

A 3.5" external hard drive connected to my Windows XP machine via USB 2.0 has a "disappearing" and "reappearing" partition problem.

After the external drive is turned on, all four partitions on it will be displayed. Very soon, they will all disappear in Windows Explorer. After a brief moment, they will reappear along with a USB-symbol icon in the taskbar, which brings up a "Hi-speed USB Device Attached to non-Hi-speed Hub" warning suggesting that I use free Hi-speed USB ports (indicated in bold).

My computer's USB ports are all USB 2.0 and I've tried attaching the external drive to different ports on the machine, all with the same result.

Would anyone hazard a guess as to the likely cause of this problem:
(1) Failed (or failing) USB controller on the external enclosure?
(2) Failing power supply to the xeternal enclosure?
(3) Corrupted partition table on the drive?
(4) Failed (or failing) USB controller on the mobo?
(5) Any other cause?

The enclosure also has an eSATA port. When connected via eSATA (or USB 2.0) to another computer, no such problem appears.

A:Hard disk partitions "disappearing" and "reappearing"

xp will loose drives when its having problems accessing them probably due to the usb 2.0 , a pci adapter would be better for you

1 more replies

I had a fresh install of 7 and everything was working fine.
All of a sudden it starts randomly freezing and programs start responding.
I got KERNAL_PAGING_ERROR BSODs etc. and got a new disk, thinking it was that.
After cloning the new disk which didn't work, and produced loads of errors on chkdsk, I decided to do a clean install of 7.

I still keep getting "Disk boot error, insert system disk and press enter", and when it does boot, it freezes all the time and every time I click the start button, it basically crashed and is messed up.

Tried new SATA cable and ports. Any ideas?

A:Windows 7 freezing, "Disk boot error, insert system disk and press enter"

BIOS settings or Motherboard issues?

Have you checked with the manufacturer website for the Motherboard that you have the Windows 7 drivers?

Is your Windows 7 DVD a retail copy...or the pre release BETA....or dodgy(in which case problems might lie there)

1 more replies

Hi, when i boot up my other computer it is a black screen and says "Primary hard disk Drive 0 cannot be found, strike F1 to continue or F2 to enter setup utility." When i strike F1 it says something like "boot up failed press F1 to try again" what do i do? When i press F2 it takes me to a screen and Undery Hard disk drive 0 it says unkown and under hard disk drive 1 it says off.

PS. My computer also makes alot of beeping sounds all of a sudden. Plz help me What is going on? Thankyou

A:Problem booting computer "hard disk drive" help plz

11 more replies

Hi,

I'm having problems with starting my pc.

Every time I try to boot it I keep getting the error "wuauctl.exe - No disk" that states:
"There Is No Disk in the Drive. Please Insert a Disk into Drive \Device\harddisk\Dr3"

And when I try to close the error message the computer reboots itself.

Any ideas?

A:"No Disk" Message on Windows XP [can't boot]

Does Windows start at all? Or is the message during the startup process and you can't get any further?

3 more replies

My problem was answered for someone previously and consists of an annoying pop-up every time I load Windows XP. I have cleaned the registry using a commercial program but this message is still there. Does anyone know how to get rid of it?. The problem does not occur when I boot to Safe Mode. I have downloaded HiJack This and here is my log file:

Logfile of HijackThis v1.99.1
Scan saved at 8:37:00 PM, on 2/26/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ZoneLabs\avsys\ScanningProcess.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\ZoneLabs\avsys\ScanningProcess.exe
C:\WINDOWS\system32\RTDCPL.EXE
C:\WINDOWS\system32\nvraidservice.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\SYSTEM32\CTXFISPI.EXE
C:\WINDOWS\System32\DLA\DLACTRLW.EXE
C:\WINDOWS\system32\CTXFIHLP.EXE
C:\WINDOWS\CTHELPER.EXE
C:\Program Files\TweakMASTER\TMTray.exe
C:\WINDOWS\System32\hplampc.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\WINDOWS\system32\ctfmon.exe

A:Windows Startup "No Disk" Message

I don't see the "usual suspects" there, but I would suspect IPOD or Itunes, or perhaps "disk keeper"

Anyway, try doing a "clean boot" to see if it happens:

Run msconfig and select the "Services" tab. Check "Hide Microsoft Services" and then disable the rest. Also uncheck "load startup group" on the general page.

See this link for detailed information:

http://support.microsoft.com/default.aspx?scid=kb;EN-US;310353

Now restart and test the issue at hand

If no problems, run msconfig and recheck half the disabled items on the Services tab. Test again. If the problem recurs, UNcheck half the items you just checked to narrow down the culprit.

If the problem didn't occur, check the other half, so all the Services are enabled -- proceed to do this on the startup tab as well.

Get the idea? You want to isolate the problem to a specific startup if possible.

Note: if you already have items unchecked under msconfig > startups and are in &#8220;selective&#8221; startup mode &#8211; you should note what these are before beginning. They will need to be de-selected again.

3 more replies

At startup continually suffer from Windows-No Disk window. Takes 3 cancels to get past. How can I fix this? Read other posts on this and it looked like this may be helpful to see:

Logfile of HijackThis v1.99.1
Scan saved at 1:36:42 PM, on 1/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
F:\WINDOWS\System32\smss.exe
F:\WINDOWS\system32\winlogon.exe
F:\WINDOWS\system32\services.exe
F:\WINDOWS\system32\lsass.exe
F:\WINDOWS\System32\Ati2evxx.exe
F:\WINDOWS\system32\svchost.exe
F:\WINDOWS\System32\svchost.exe
F:\WINDOWS\system32\spoolsv.exe
F:\WINDOWS\system32\Ati2evxx.exe
F:\WINDOWS\Explorer.EXE
F:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
F:\WINDOWS\system32\LVCOMSX.EXE
F:\Program Files\Common Files\Real\Update_OB\realsched.exe
F:\Program Files\Microsoft IntelliPoint\point32.exe
F:\Program Files\Microsoft AntiSpyware\gcasServ.exe
F:\Program Files\Viewpoint\Viewpoint Manager\ViewMgr.exe
F:\WINDOWS\system32\ctfmon.exe
F:\Program Files\Microsoft ActiveSync\WCESCOMM.EXE
F:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Bin\hpoorn07.exe
F:\PROGRA~1\HEWLET~1\AiO\Shared\Bin\hpoevm07.exe
F:\WINDOWS\system32\hpoipm07.exe
F:\Program Files\Microsoft AntiSpyware\gcasDtServ.exe
F:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
F:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
F:\Program Files\Cisco Systems\VPN Client\cvpnd.exe
F:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE

A:"Windows - No disk" message at startup

This doesn't look copacetic since no file is listed, I'd check and "fix" it:

O4 - HKLM\..\Run: [Subst] subst C: F:\

Other than that the scanlog is ok.

When did this problem begin? If recent, you might just want to try a System Restore.

The problem is occasionally due to the system trying to access some removable media which has no disk in the drive, such as a zip drive.

It can also be due to drive letters being assigned to drives that no longer exist. What exactly is on your "c:" drive?

http://support.microsoft.com/default.aspx?scid=kb;en-us;330137

3 more replies

Hi.

I am using Windows XP SP2. I just uninstalled Norton AntiVirus 2004. The uninstall would not complete, so I downloaded and ran the SymNRT program (from Symantec) to remove the program. All went well. The program advised that all Norton products had been successfully removed. Upon reboot, after I click my icon on the XP "Welcome" screen and type in my password, windows loads the desktop as normal. A few seconds later howeverm I get the following message:
"Windows - no disk Please insert disk in drive"
Clicking 'cancel' removes the message and everything appears to be fine. I did a bit of research and have already tried the following to no avail:

Clearing recent files list from QuickTime
Starting the PC in Safe Mode to see if the error comes up (it does).
Disabling SpySweeper from running at startup
Disabling ZoneAlarm from running at startup

I still get the error. I since have re-enabled ZoneAlarm and SpySweeper. I have also installed NOD32 AntiVirus. The error remains constant. It happens each time I reboot.

I notice that the log file below refers to L:\Adobe\Photoshop Elements in a couple of spots. I recently did something that caused drive letters to change. I used Drive Mapper in Partition Magic to help fix any problems and all appears to be well. My old "L:" is now "G:". I'm not sure if this is relevant, because this happened a few weeks ago and the error I'm posting about only started today. I did figure... Read more

A:"Windows - no disk" message at startup

9 more replies

Hey guys,

I've had this Sony Vaio VGN-CS190 for almost 10 months now, and I've recently decided to upgrade it's "Vista Home Premium" setup to the new Windows 7 RC.

I've installed and had the most basic features already supported. I finally decided to attempt to get the "fn" keys and the top "volume/media" control sliders to work (Touch Sensitive).

After downloading the drivers and Shared Library and installing each, restarting, install, restart, etc; I only have the volume part of the the "fn" keys to work. The top sliders light up, but have to no effect on the computer.

The brightness "fn" keys and top volume slider are the only real things I need, as I do not use the volume, network, and monitor "fn" keys.

I've talked to Sony tech support and they've said to wait for October for the Windows 7 drivers to be released, and that there are generic drivers released by Microsoft.

They wouldn't tell me where these drivers are located, and was hoping that a Support Wiz could help me out on this one. I'm considered a nerd, so I know my way around the computer and can do advanced operations, I just need to know how to fix this problem.

Thank,
-Artur

A:SONY Vaio - "Battery Detected" Error w/ Windows 7 RC

Hello and welcome to TSF, playful_cyanide!

I snooped around Google and found this link, as it seems useful.

Also, you can use this program to give detailed analysis of your battery for reference.

I noticed you're in Sacramento, that's like right by me, I'm in Paradise.

19 more replies

as described in the title when i boot my laptop: http://www.newegg.com/Product/Product.aspx?Item=N82E16834117780R
i get the "disk read error -> press cntrl alt del to restart" message. I then tried to access the backup partition through f10 only to run into this error "status : 0xc00000e9 Info : an unexpected I/O error has occurred" it seems that it cant communicate with my hard drive.

I read a few other forum posts but didnt see anyone have the 0xc00000e9 error also. Bios boot priorities are in order if that matters.

Is there a fix without having to replace the entire HD and buy a new vista installation(preinstalled w/ no disc in the box).

Im very reluctant to take it to a service center as i can very likely fix it myself (with the help of the friendly people here of course), only problem is im having a little trouble..finding.. my HD in this damn notebook.. heh, ill figure that part out. new to notebook repair.

edit: found the HD, doesnt look like it even uses a cable, just plugs right into what i assume is the mb. dont know if that helps just supplying what i can.

More replies

I have researched the Virus Removal area of this site to determine if the following error is a legitmate Windows message or a symptom of a virus.  But I haven't found this exact error.

There is also a BIOS message at boot but it is in japanese so I can't be sure what it says...but I think it is also suggesting a disk error. So perhaps it is legitimate.  The thing is, this message has been coming up on the computer for months according to my niece (her computer).  The disk never actually fails. I ran disk check.  No sign of any errors.  Nothing in the event log either.

Show details simply tells you to do a backup of the disk and displays the disk name.

I read a description on another forum which I cannot find now that suggests this is not a legitimate  Windows message (the red circle being a clue) but there is no other malware dialog coercing the purchase of a program.

I've run every anti-virus, anti-malware program that is recommended else where in this forum (MalwareBytes, Kapersky, Malicious Tool Remover, adwcleaner, MS Essentials).   Not combofix or anything like that.

Before I try a restore or go searching for a new hard drive, I just want to confirm that this is a legitimate Win 7 Home Premium error message.

Thank you

A:Is this virus or legit error: Windows detected a hard disk problem

Download GSmartControl for Windows and save it to your desktopUnzip the folder to your desktopDouble click gsmartcontrol.exeAllow the program to search for and list your hard drive(s)Double click your driveGo to the PERFORM TESTS tabMake sure that the TEST TYPE is set to SHORT SELF-TESTClick the EXECUTE buttonAfter the test completes, click the VIEW OUTPUT button and copy and paste the contents in your reply

3 more replies

I am having the same problems, but am getting another error: Error 5: Access Denied. Do you know how to fix this issue? Please help if so Also my computer keeps popping up ' windows detected a hard disk problem'... so I don't know what is going on...if these issues are tied together or not?  ​Thanks in advance!

I am having the same problems, but am getting another error: Error 5: Access Denied. Do you know how to fix this issue? Please help if so Also my computer keeps popping up ' windows detected a hard disk problem'... so I don't know what is going on...if these issues are tied together or not?

Does the error message same as the below image.

If above message has been displayed then, you should know the fact that your hard drive failure is imminent and may die sooner or later. This means you could lose all of your data i suggest you backup your personal files to external drive. If the computer is in warranty, you can contact your computer manufacturer for assistance in replacing your hard disk with a new one when the Windows has detected a hard disk problem. You can check health SMART report of the hard disk drive and repair surface errors that are not mechanic errors with your hard disk drive manufacturer diagnostic tool. Follow the instructions at below url address link.

Bootable Hard Drive Diagnostics
http://www.carrona.org/hddiag.html

1 more replies

I'm trying to update the software for a golf GPS and every time I get half way through the installation my computer crashes and I get the error message "Windows driver framework has detected an error."

I contacted the GPS company and they told me it's a problem occurring either in the Windows Operating system or the USB ports on the computer are intermittently failing.

How can I check/fix the problem???

A:"Windows driver framework has detected an error"...Help..

Hi Cmcaro70,

When your computer crashes do you get a Blue Screen?

Steven

6 more replies

Hello, TSG!

Just yesterday I was using the computer normally until I got a Blue Screen. Getting a blue screen is usually something normal that occurs to my every so often, so I didn't mind it and rebooted the computer normally. However, I got two more blue screens within the next hour. The 3rd time rebooting, my computer starts to act strange as if it had a virus. Upon powering up the monitor would just display a black screen with two lines about something --- which I don't remember, sorry --- and stayed like that unless I plugged out the power cord or held on the power button to shut down. Then when after a few tries it boots and displays a message "Floppy Disk Failure" and "Drive 1 not found: Serial ATA, SATA-1" (and the same message for Drives 2 and 3) show up. Also it asks me to continue loading by pressing the F1 Key.

When Windows loads the first time, it displays a message saying a bunch of hardware has just been installed and ready for use. Also, my internal clock resetted itself back to Monday, November 07, 2005 (Which, if I recall, is the date when I got the computer) and my speakers do not work.

TL;DR Version
3 blue screens within a short time
Floppy disk fail

Anyway, I browsed through Google but I haven't seen anyone with both problems. I disabled my Floppy Disk Drive and that message doesn't show up anymore, but the others do and my computer still isn't fixed. I ran a vir... Read more

9 more replies

Microsoft Updater says I have a critical update (KB2286198) to install but it fails and gives the message: "WindowsUpdate_80246007" "WindowsUpdate_dt000".

I've tried a couple of things that MS Support suggests but they don't work and don't seem to really apply to this particular error message. Searching for the error code 80246007 hasn't yielded anything yet that works.

Any ideas?

Gateway GT5622
x86 based PC
Processor Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz, 1800 Mhz, 2 Core(s), 2 Logical Processor(s)
Operating System Name: Windows Vista
Operating System Platform: NT/2000/XP/Vista
Operating System Major Version: 6
Operating System Minor Version: 0
Operating System Build Number: 6002
Service Pack Description: Service Pack 2

A:Update Error Message "WindowsUpdate_80246007" "WindowsUpdate_dt000"

6 more replies

I will try to keep this as brief as possible and yet give you wise and wonderful tech persons all the information you need to help me out. I am intelligent, but NOT a super-user.

I have an e-machines desktop computer. It is old. A Cyrix MII 266 processor with upgraded memory. I have a 10gb Maxtor hard drive which is the issue at hand. I am running Win2000. My home computer (the e-machine desktop) is networked through a router with my printer and my business laptop.

The problem: Win2000 loads and boots. It LOOKS like it's functioning properly. However, it cannot read any of the files on the disk. When I try, it tells me C: is inaccessible. I can't search, explore, etc. The files are "non-existent."

I managed to get Windows to create a backup of it and saved that file to my Laptop. I can only "assume" that it actually backed up ALL the files on the drive so they are safe.

One really ODD thing you should know is that I cannot get into the BIOS. When it boots and usually gives you that second or two to hit [F2] and enter setup ... doesn't do that any more. I sit and hold the F2 key. Nope. I've second-guessed myself and tried the ESC key and the F1 key. I've tried it with and without the CTRL key. Nothing. So I can't even tell the silly thing to boot from the CD instead, load onto my D: backup drive and then kill the C: drive. It's like it's possessed.

Things I've already tried (not necessarily in this order):

A:Solved: Hard Disk issue similar to "Help! Broken Hard disk" Thread

14 more replies

My nextdoor neighbor tried to slave his Win98 disk into his WinXP Home computer. Although the Device Manager seems to say that it recognizes the slave disk, when My Computer window is displayed, there is no recognition of the slave disk? We went through a device manager uninstall and reboot with the same result.

My neighbor did not make any changes to the BIOS to indicate a slave disk - I assume all are IDE on his HP machine.

Can anyone point me to a good online tutorial dealing with "How to Slave a Hard Disk" for Windows?

Tia,

-- Tom

A:Need Tutorial on "How to Slave a Hard Disk" for Windows

I am sure his current drive is set up and jumpered as Cable Select. If it is the drive you are adding as a slave also needs to be set to cable select and plugged into the second connector on the ribbon cable. The BIOS also needs to recognize the drive in order for the OS to be able to use it.

2 more replies

When turning on, the screen will display the windows startup animation and once finished a blank screen. After about 30 seconds to a minute a black screen pops up and asks if i would like to start up normally or run startup recovery. The Normal start up fails and ends up returning to the first black screen. When i run startup repair it says it cannot find a solution. I sent error message and the log said:

All tests performed were successful.
Root cause found: boot status indicates that the OS booted successfully.
Root cause found: bad hard disk: Bugcheck 7a. Parameters = 0xfffff8a000efeb80, 0xffffffffc0000185, 0x1753e08c0, 0xfffff900c0770000.

Each session reported a single root cause which ended up being one of those two.

After that i went under additional options and signed into system recovery using one of the users and selected startup repair again and went under problem details:

Problem signiture:
Problem event name: StartupRepairOffline
Problem Signiture 01: 6.1.7600.16385
Problem Signiture 02: 6.1.7600.16385
Problem Signiture 03: unknown
Problem Signiture 04: 21200110
Problem Signiture 05: AutoFailover
Problem Signiture 06: 6
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

I tried looking up aolutions online but couldnnt find one that was identicle.

I then tried diskcheck using command prompt, under C: /F and /R.

Sometimes the processes would complete with no errors or solutions and sometimes th... Read more

What you need is a new disk. This one seems to be broken. Bugcheck 7a means that an essential Kernel module cannot be loaded. If chkdsk could not repair it, you do not have a lot of options.

Try to save your files (e.g. with Lucid Puppy) and make a clean reinstall on the new disk.

5 more replies

Hello All,

I am experiencing a very debilitating issue with my laptop. The error indicated on the title of this thread appears every time I try to open multiple programs on my machine; the error is present in at least the following applications: Windows explorer, HP SimplePass, HP CSI Shell, HP Support Assistant, HP Installer, Adobe Acrobat X Pro, Synaptics TouchPad V7.5... and perhaps more.

I include with this message a zip file with some recent logs (CBS. log, Errors Event Viewer, Last Scan.txt, Malware log.txt, Check Disk Event Viewer log) for your review so that both of us can save some valuable time.

Note: I am not by any means an expert on either computer software or hardware so, I would really appreciate if you help me out to sort this issue having that in mind.

A:Error message: "A problem caused the program to stop working..."

Hi,

Can you remember when this problem started to happen, if so had you made any changes to the computer such as software installations?

If so, you can try a system restore or use a backup if you have one to roll the os back to a time when all was working well and see if this solves your problem

I can almost guarantee that this is either a damaged or corrupt shell or a conflict with some software, as the fact that you can load the operating system up and get past post shows that it's not hardware related in anyway

Thank you

2 more replies

I have an Hp C7280 All in one printer, that I've owned for about 5 years. For about the last year or so I have gotten this error message "Photo Tray Problem" It won't let me do anything with the printer when this happens. The tray is pushed all the way in and actually I never even use it. Ever! So I'm not sure why it randomly pops up? In the past, I would reset the printer by unplugging the power and letting it set for a couple of hours. Then it would work...until now. I have had this problem for over a week and have tried everything I can think of! I have...
1. Opened and closed the tray (to make sure it's as far in as it can go)
2. Cleaned it out with compressed air (made for printers)
3. Unplugged the power and let it sit for over 24 hours
4. Checked to see if anything is stuck inside or missing. It runs through it's cycles fine, although it's a little noisier than it usually is, not much just a little. (But it might just be louder because my face is shoved inside the printer to see what's wrong )
5. Tried to reset it using a sequence code to get to the "System Configuration Menu" I cleared out the Hardware failure status

Nothing is working! Any and all help is greatly appreciated!! I am desperate will try about anything!

A:Hp C7280 All in one printer "Photo Tray Problem" error message

Hi,

Welcome to TSG..

2 more replies

I'm experiencing real difficulty in trying to delete a sub-Folder from Pictures. No matter what I've done, including taking ownership of it, I am continually getting an error message that says "Item not found" as below;

It continues to show as part of my Admin/Pictures sub-Folder tree, and hasn't budged even after a couple of reboots.

I've also tried to delete it from the thread shown in the panel above, but again without success, and with the same error message.

I just want to be rid of it as it no longer performs has any useful purpose or storage value in Pictures.

either system restore or just ignore it for a while and try deleting it later. i had the same problem before, but it seemed to disappear on its own after a bit of time =S

5 more replies

My printer was not printing at all. I have changed all 5 cartridges, and the printer still does not print. The RESUME/CANCEL button is flashing orange continuously, and when I attempt to print anything I get the following error message: "Operator Error: Press the printer's RESUME button. If this doesn't clear the error, cancel printing and turn the printer off and then on again".

I followed these instructions (multiple times) with no success.

From the printer's Maintenance I tried the following:
i) Deep Cleaning - Black PGBK, resulted with the same error as above.
ii) Deep Cleaning - All colours, same result as above.
iii) Cleaning - same result as above.
iv) Print Head Alignment - same result as above.
v) Nozzle Check - same resuilt as above.
Turned the printer off and on again, flashing orange light.
Shutdown the computer and restarted it, with no improvement.
Lastly noted how many orange flashes - five. So I consulted the Service Manual,
Section 2-1. Operator Call Errors (by Alarm LED Blinking in Orange).
5 times; Solution suggested Install the print head properly.
All the Ink Cartridges show solid red light (installed correctly). Can anyone please offer a suggestion as how to correct this problem, thank you?

A:Canon Pixma IP4200 Problem - "Operator Error" message

http://www.fixyourownprinter.com/posts/27843
see if that helps at all

1 more replies

Hi,

I have started receiving this message every time WinXP tries to install updates:

"Windows - No Disk Exception Processing Message c0000013 Parameters 75b6bf7c 75b6bf7c 75b6bf7c"

I believe it may have to do with my recently removing a hard drive to use in another system (without having disabled it in Device Manager first), but I don't know how to get rid of it. It is interrupting the update installation and not allowing it to complete.

Any advice will be gratefully appreciated.

Thanks,
Sam

PS - Here's a HijackThis log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:58:07 PM, on 11/11/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16735)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Acronis\Schedule2\schedul2.exe
C:\Program Files\Citrix\GoToMyPC\g2svc.exe
C:\Program Files\Citrix\GoToMyPC\g2comm.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\iaantmon.exe
C:\Program Files\Citrix\GoToMyPC\g2pre.exe
C:\Program Files\Citrix\GoToMyPC\g2tray.exe

A:"Windows - No Disk" Message

Hi, might work, scroll down to the auto fix.

http://wiki.castlecops.com/Windows_Update_Fix

Bill

1 more replies

Just re-installed a new hard drive. After reloading windows and my printer.. HP PSC 2410xi photosmart.... I began getting a pop up that reads:
Windows No Disk
There is no disk in the drive. Please insert disk.
Cancel Try Again Continue

Logfile of HijackThis v1.99.1
Scan saved at 9:22:53 AM, on 5/1/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
G:\WINDOWS\System32\smss.exe
G:\WINDOWS\SYSTEM32\winlogon.exe
G:\WINDOWS\system32\services.exe
G:\WINDOWS\system32\lsass.exe
G:\WINDOWS\system32\svchost.exe
G:\WINDOWS\System32\svchost.exe
G:\WINDOWS\system32\spoolsv.exe
G:\WINDOWS\System32\CTsvcCDA.exe
g:\program files\mcafee.com\agent\mcdetect.exe
g:\PROGRA~1\mcafee.com\vso\mcshield.exe
g:\PROGRA~1\mcafee.com\agent\mctskshd.exe
G:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
G:\WINDOWS\system32\nvsvc32.exe
G:\WINDOWS\System32\tcpsvcs.exe
G:\WINDOWS\System32\snmp.exe
G:\WINDOWS\System32\svchost.exe
G:\WINDOWS\System32\MsPMSPSv.exe
G:\WINDOWS\Explorer.EXE
G:\WINDOWS\BCMSMMSG.exe
G:\Program Files\McAfee.com\VSO\mcvsshld.exe
G:\Program Files\McAfee.com\VSO\oasclnt.exe
G:\PROGRA~1\mcafee.com\agent\mcagent.exe
G:\Program Files\Roxio\Easy CD Creator 5\DirectCD\DirectCD.exe
G:\Program Files\Common Files\AOL\1145302271\ee\AOLSoftware.exe
G:\Program Files\iTunes\iTunesHelper.exe

A:"Windows No Disk" Pop Up Message

Continue here: http://forums.techguy.org/security/463939-help-windows-no-disk-pop.html

1 more replies

Hi all..

Every time I put a cd in my cd-rom I get this error :

"mmjb MFC Application has encountered a problem and needs to close. We are sorry for the inconvenience."

I do not even know what this program is, but I am quite tired of seeing this message. Can you tell me how to get rid of it?

A:Error message "mmjb MFC Application has encountered a problem..." when I put in a cd.

Bump...

2 more replies

I keep getting the error message "Windows - Delayed Write Failed : Windows was unable to save all the data for the file D:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere." I'm not sure if the error is D:\$Mft or C:\\$Mft I'll post once the error appears again. The message appears at random times, usually when the comp's idle. The computer acts totally normal after the error message occurs. I've recently jumped from 1 GB of RAM to 2 GB of RAM and I've also upgraded my boot drive from a 250GB IDE hard drive to a 250 Western Digital SATA Drive.

What is this and what can I do to stop it?

Any tips or suggestions are much appreciated,

Capnbob

A:"Delayed Write Failed" Error Message - HDD Problem?

12 more replies

Ok, So i put disk #1 in, and autorun goes fine.
I choose the language click ok,
then about 10 seconds later I get this poping up - - -

Why is it doing this ?

How do I fix it ?

A:problem installing Sims 2, error message "win32" (not in common section)

7 more replies

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume

A:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

1 more replies

Hi there

for some reason I started getting an error message (tss.exe has encountered a problem and needs to close. We are sorry for the inconvenience.") and I've got no idea what this means and what's causing it.

I've run my spyware programs and did a virus search but nothing was found. I also tried a system restore but it won't even do that. Can anyone help please please pretty please cause it's driving me nuts!!! Thanks!

Oh, and I am using windows XP!

Tan

9 more replies

How can I work around the following rror message "cannot copy file. cannot read source file or disk". I'm using Windows XP on a Gateway GT 4016

A:error message "cannot copy file. cannot read source file or disk"

Get a new disk or provide a whole lot more details about what you're trying to do and what program(s) you are trying to do "it" with.

1 more replies

I'm using windows7.Applications are not opening properly.Getting error message"There was a problem sending command to the program"

More replies

hi. i'm new here. nice to meet all of you!
just like a lot of folks i'm sure, i've come here because there are some weird things running on my pc that shouldnt be in there.

heres the hijack log
~eric

Logfile of HijackThis v1.99.1
Scan saved at 10:06:40 AM, on 9/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Dantz\Retrospect\retrorun.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\ZoneLabs\vsmon.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\Java\jre1.5.0_01\bin\jusched.exe
C:\PROGRA~1\VERIZO~1\HELPSU~1\VERIZO~1.EXE
C:\PROGRA~1\VERIZO~1\HELPSU~1\SMARTB~1\MotiveSB.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\Program Files\Common Files\Verizon Online\ConnMgr\cmisrv.exe
C:\Program Files\Windows Media Components\Encoder\Wmencagt.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\ZoneLabs\isafe.exe
C:\Program Files\Common Files\Verizon Online\AppMgr\vz... Read more

A:"windows no disk" and "winsilly" "win956temp"

11 more replies

Hi!
I got a new PC tonight, custom-built (from eBay) and I've been attempting to install Vista Home Premium x64 for the last 4 hours!

It supposedly had Vista pre-installed and was "ready to run" but the seller was obviously a liar. Because when I turn it on, this is what happens:

- a 'Biostar T-series' visual appears on the screen for a second (I don't know what that is)
- it then goes to a command screen with 'Hardware Monitor' and lots of CPU details

it then says:

Verifying DMI Pool Data ........
Boot from CD:
Press any key to boot from CD or DVD.....
Press CTRL+ALT+DEL to restart

If I do press a key before the disk read error message appears it does bring me to the Vista installation screen. It then does install Vista, but when it gets to the point where the system needs to reboot, it just brings me back to the same command screen again.

I've tried to format the hard drive, and even attempted the system repair method (it found no problems with the system startup apparently). After I do the system repair process, instead of "A disk read error occurred", I get "BOOTMGR missing" instead, whatever that means.

At present, the computer is unusable, and I'm kinda pissed off cause I've wasted a whole night on this and will probably do the same tomorrow.

Any help would seriously be appreciated - thanks.

A:x64 Installation problem - "disk read error"

Remove the DVD so the machine boots from the hard drive on the first reboot during installation. Or set the BIOS to boot from CD first and hard drive second.

1 more replies