Tech Problem Aggregator

hp 110 series desktop

Q: hp 110 series desktop

hi i have a hp 11o desktop pccan someone ples tell me how to boot from a memstick ples

More replies
Answer Match 47.88%

please help me, i reformat my HP 110 Desktop PC Series, but the problem is, the CD needed for installation was lost, how can i retrieve the Product Key? Serial Number : 4CE33904M1 / Product Numer : H6L44AA / Model Number : 110-012d / OS Windows 8

More replies
Answer Match 47.46%

?Constantly receive this message when on the internet...on a brand new H50 desktop?? Hmm, we can't reach this page.Try thisMake sure you?ve got the right web address: http://www.puritan.comRefresh the pageSearch for what you want

More replies
Answer Match 47.46%

Hi there,

My PC is reasonably mature now and after getting a few BSOD's I just thought I was getting a little unlucky every so often. However they are now increasing in frequency and I can't seem to see a recurring theme in-between them.

ALEX-PC-Sun_07_02_16_223126_00.zip

Here's the log file. Hope it helps. I'm happy to provide any more info required.

Thanks a lot for any help at all in advance

A:A series of BSOD's during games and on the desktop

Please make sure to remove all pirated stuff from your system before we can start troubleshooting.

Code:
+++ WER1 +++:
Fault bucket 128944370255, type 5
Event Name: CLR20r3
Response: Not available
Cab Id: 0

Problem signature:
P1: AutoKMS.exe // Only variant I know of autokms is a crack variant
P2: 2.5.2.0
P3: 53c9a9a0
P4: mscorlib
P5: 4.6.127.1
P6: 561da691
P7: 1514
P8: 22
P9: System.FormatException
P10:

0 more replies
Answer Match 47.04%

Model SVE151G11L. I do not want to delete the contents on the HDD so reloading the OS will only be a last resort. When i power on first screen shows:
 

 
Automatic Repair
Automatic repair couldn't repair your pc
 
 

I then choose Advanced Options which shows 4 options:
 

 
Continue- Exit and continue to windows 8
Use a Device- Use a USB device, network connection or windows Recovery DVD
Troubleshoot- Refresh or reset your pc, or use advanced tools
Turn off your pc
 
 

 
Anything I can do here to get back to windows without losing any files please? I don't wish to use the Troubleshooting option if it will erase any files on the HDD?

A:Sony Vaio E series Laptop cannot go to desktop

You should be able to "refresh" your pc without losing your files. Im not sure about programs, but personal files you shouldnt lose. This should  work, I have done it myself and the Microsoft website also says it will not remove personal files when you choose this option. But I will say do it at your own risk. If it works, back up your personal information onto an external media for safe keeping incase something like this happens again.

7 more replies
Answer Match 47.04%

Hello!  I went to put my desktop into sleep mode before bed last night and noticed it had turned off.   No idea why.  I go to turn it on and NOTHING.  No lights, no sounds, no fans, nothing.  The power signal light on the back is flashing green.  I followed some steps from this page http://support.hp.com/us-en/document/bph06788#AbT4 Unplugging everything from the back and holding  the power button for 10 seconds didnt do anything.  Pushing for 1 second and waiting 10 seconds didn`t do anything.  I took off my side panel for the next steps, but didn`t want to touch anything as I don`t want to harm anything.  I`ve tried another outlet and the light keeps blinking green.  I haven`t had this computer for too long, maybe a couple years or less.  I take good care of it with good antiviruses and making sure to put it to sleep mode everynight, and keep it updated etc.  Looks like the power to the machine is okay since the light is flashing....  is it something internal? Wondering if anyone could help?   Feeling anxious.  Please and thank you! 

A:Need some help! Desktop Envy 700 series wont turn on! No li...

I understand that you started through the troubleshooting guide for power supplies.  The step about disconnecting internal components is essential to continue the troubleshooting, however.  If you are not comfortable with that, maybe get a more knowledgeable friend to help.  Otherwise it is off to the repair shop.

8 more replies
Answer Match 47.04%

I'm having Windows Vista home edition on my HP laptop. The issue is, after I signon as Admin or Guest, I just get a dark /balnk screen and no desktop background or any icons, no taskbar etc.

I can access task manager by pressing (ALT+CTRL+DEL), therefore I can bring up the desktop (all icons and taskbar, system tray, quick launch) by initiating the task (explorer.exe) manually from New Task tab.

Please help to get rid of this issue.

Thanks,
Paresh.
 

More replies
Answer Match 47.04%

How to clear power-on password of HP desktop 110-a04 series pc?

A:how to clear power-on password of HP 110 desktop PC series

Hi, Please try 3 times then post back error code Regards.

1 more replies
Answer Match 47.04%

I have an ACER M4 Series, Veriton desktop PC, Model number M4618G-Ui5240W.  The PC has an Inter Core i5-2400 CPU @ 3.10 GHz, 4 GB of Ram and a 32 bit Operating System .  I am running Windows 10. Recently it has begun failing during normal operations.  The top of the monitor will flicker with horizontal lines corrupting the video image, followed by loss of output to the monitor which goes blank.  The PC then either freezes with an annoying beeping sound that continues until I perform a hard shutdown or it completely shuts itself down. Any ideas what is causing this or what I can do to correct this issue?



Chuck

A:I have an ACER M4 Series, Veriton desktop PC, Mode...

let's try with some basic test. windows logo key + stypemem window memory test will appear as first result, click it and run a memory test, so we can check if it's a ram issue.

4 more replies
Answer Match 47.04%

Gentlemen/Ladies: I am strongly considering the purchase of above HP Desktop. I will use the system for surfing the web and video and photo editing. I am a novice in the area of video and photo editing. I am taking up the craft as a hobby and see where it takes me. The primary components of the system will be as follows:

- Windows 7 Home Premium (Upgrading to Windows 8 when available)
- Processor:3rd Generation Intel(R) Core(TM) i7-3770K quad-core processor [3.5GHz, 8MB Shared Cache]
- Memory: 16GB DDR3
- HD: 256GB SSD + 1 TB 7200 HD
- GPU: 2GB Nvidia GeForce GTX680 [DVI, HDMI and VGA via adapter]
- Power Supply: 600 Watt
- Liquid Cooling Solution
- Monitor: Looking at Dell 27"2560x1440

The system comes equipped with Adobe Photoshop and Adobe Premiere 10

HP's Phoenix series is a favorite of some gamers. I was considering an Imac but decided against it because I wanted to stay with a PC. My question to the forum is are these components a little overkill? The price is not a barrier for me.

A:Is the HP-HPE h9-1210t Phoenix series Desktop Overkill for Me

I guess it will depend on how much video editing you end up doing. It is absolutely overkill for surfing the web, and overkill if you only do a little photo editing. The extra cores will help with the video editing, but you will never use them surfing the web. Even if you do gaming it will not help much. Games rarely use 4 cores of a processer. If you want a system like that, you would be better off building it yourself. It really isn't as hard as most people think and you will get better quality components, and exactly what you want. And you always have the experts here in chosing components and assembling the computer.

1 more replies
Answer Match 47.04%

I have an ACER M4 Series, Veriton desktop PC, Model number M4618G-Ui5240W.  The PC has an Inter Core i5-2400 CPU @ 3.10 GHz, 4 GB of Ram and a 32 bit Operating System .  I am running Windows 10. Recently it has begun failing during normal operations.  The top of the monitor will flicker with horizontal lines corrupting the video image, followed by loss of output to the monitor which goes blank.  The PC then either freezes with an annoying beeping sound that continues until I perform a hard shutdown or it completely shuts itself down. Any ideas what is causing this or what I can do to correct this issue?




Chuck

A:I have an ACER M4 Series, Veriton desktop PC, Mode...

let's try with some basic test. windows logo key + stypemem window memory test will appear as first result, click it and run a memory test, so we can check if it's a ram issue.

4 more replies
Answer Match 46.62%

Hello AllI would first like to say that I am grateful for all the folks at Bleeping Computer. I have been assisted by them more than once and remember they do accept donations to keep the site going.I recently had the virus windows recovery tool and it hid all of my documents. Very scary moment for me. I went through the process to remove it with malware bytes and secunia psi and went into the command prompt to unhide everything. Now in all of my documents, pictures, videos, desktop I have a notepad log file with:[.ShellClassInfo][email protected]%SystemRoot%\system32\shell32.dll,-21787This also pops up every time the laptop starts up. Should I be concerned? How do I stop it from popping up on every boot up?This one is in my documents:[.ShellClassInfo][email protected]%SystemRoot%\system32\shell32.dll,-21770IconResource=%SystemRoot%\system32\imageres.dll,-112IconFile=%SystemRoot%\system32\shell32.dllIconIndex=-235This one is in my pictures[.ShellClassInfo][email protected]%SystemRoot%\system32\shell32.dll,[email protected]%SystemRoot%\system32\shell32.dll,-12688IconResource=%SystemRoot%\system32\imageres.dll,-113IconFile=%SystemRoot%\system32\shell32.dllIconIndex=-236[LocalizedFileNames]Sample [email protected]%SystemRoot%\system32\shell32.dll,-21805Thanks for your help.Mark

A:Windows Recovery Series Removed and desktop notepads everywhere

Open your C driveOn top click on Organize-Folder & search optionsClick on view tabIn advanced settingsMake sure to check mark DON'T show hidden filescheck mark HIDE protected operating system filesClick okNow,press Windows+R key and typeshell:common startup and click okDelete the desktop.ini file from the startup foldergood luck

3 more replies
Answer Match 46.62%

So, yeah. 5 year warranty compared to two of Buffalos and WDs, but does that actually mean that much more reliable a drive? With the problems with Seagate drives lately and a price slightly lower than with other similar drives I'm a bit wary... I won't be storing/backuping anything of real importance, just a handier option compared to a squadron of flash drives How much limited is the warranty actually? Manufacture flaws with no responsibility over the lost data or what? I'm a bit... Uncomfortable with any kind of warranty or RMA thing....
 

A:Seagate Freeagent Desktop series (especially 1TB model) reliable or not?

Aanyone? The actual model seems to be Desk, not Desktop, FWIW.
 

1 more replies
Answer Match 46.62%

I am SERIOUSLY thinking of buying HP TouchSmart 610 Quad series All-In-One desktop with following (customized) specs. http://www.shopping.hp.com/webapp/s...ore&category=desktops&series_name=610q_series

However, I DO NOT like the graphics card 2GB NVIDIA GeForce GT 425M - looks like they are putting laptop graphics card into a desktop.

My question(s) is/are :

Can I replace this card with one of the NVIDIA GTX series graphics card ? Which one will you recommend? I want to put in a new GTX 590 or any of the following :

GeForce GTX 580
GeForce GTX 570
GeForce GTX 560 Ti
GeForce GTX 560 (new!)
GeForce GTX 550 Ti
GeForce GTX 460

Will it be a simple SWAP or I need to upgrade PSU as well.

If I need to replace PSU what will be specifications of the new PSU? I do not know what is the rating of the current PSU. Do you think, it will handle the new GTX card?

Specs of the desktop :

Operating system SAVE $21 on Genuine Windows 7 Professional 64-bit edit
Processor Intel(R) Core(TM) i7-2600 quad-core processor with Turbo-Boost [up to 3.8GHz, 8MB cache] edit
Memory FREE UPGRADE to 8GB DDR3-1066MHz SODIMM [2 DIMMs] from 6GB edit
Hard drive FREE UPGRADE to 1.5TB 5400 rpm SATA 3Gb/s hard drive from 1TB edit
Office software No additional office software edit
Security software SAVE $30 on Norton Internet Security(TM) 2012 - 15 month edit
Graphics card 2GB NVIDIA GeForce GT 425M edit
Primary optical drive FREE UPGRADE to Blu-Ray writer from Blu-Ray player edit
Networking Pre... Read more

A:New NVIDIA GTX card in HP TouchSmart 610 Quad series All-In-One desktop

6 more replies
Answer Match 46.62%

I purchased what was described as a 'Dell 3588D Motherboard Slot 1 Dimension
XPS-B' motherboard from eBay. It uses Rambus memory sticks, but has 3
memory slots to fill, while every motherboard of that type I have researched only
has 2 memory slots. In addition, most of the Series B desktops I looked into
seem to be limited to 512MB of memory.
Because my motherboard has 3 memory slots, would I be allowed to insert three 256MB memory sticks, giving me a total memory of 768MB? I'm told that you should
not exceed the required limit of memory. Would someone care to comment on my
predicament?

hextek
 

A:Filling a 3rd memory slot of a Dell B Series desktop

Just try it, it'll either work or it won't work.
 

1 more replies
Answer Match 46.62%

Help!
I have an Acer AST 160-US321H desktop PC that is not connected to the internet and used for home projects only. Today I can not get it to come up at all. I have turned it on and off several times hoping to reset whatever went wrong. Also, there is a red light shining next to the green power light once I power it up. Nothing happens on the screen. The CPU is running (at least the fan) but that's about it. Any suggestions?
Thanks!
Deb
PROBLEM SOLVED!!!! I shut down the power strip for a few minutes then tried to reboot again and after doing a disk scan all is well again! THANKS!!!
 

More replies
Answer Match 46.62%

Since I upgrade to win 7 not getting no sound from my speakers. It says no audio output device is installed. can someone tell me what to do?Thanks

A:No sound from desktop lenovo 3000 j series upgrade...

Welcome to the forums! Windows 7 has some inbuilt diagnostics to check for your sound issues Go to control panel and select troubleshooting your sound devices You can also go thorugh this thread at microsoft answers  If you still have a problem with your sound device make sure that is compatabile with windows 7,you may need to run the windows 7 upgrade advisor If the upgrade advisor finds the required drivers it will point out the link to you. Hope this helps   



Cheers and regards,? ???????????? ????????? ? ??????dh'? d? ?I am a volunteer here. I don't work for Lenovo

5 more replies
Answer Match 45.78%

I recently got an HP 2311x Monitor for Christmas and hooked it to a Lenovo H200 tower. I am unable to get past Windows splash screen. BIOS says "we apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this." I have tried going into safe mode and just about every other option to no avail. I asked HP tech support to see if bad monitor but it is fine. I also called Lenovo Idea tech support and they said a tech will call back. I think something is uncompatible with Lenovo and HP monitor. It worked just fine when it was hooked to an old CRT. Cant handle the latest flat screen technology perhaps?. Any suggestions?

A:Lenovo H Series Desktop is not responding to recent HP 2311x monitor

Do you know anyone you can borrow another monitor from?

Have you checked monitor settings to make sure frequencies are within the range supported by your display device?

Another option would be to manually disable the display adapter driver. What type of display adapter is involved? Intel, NVIDIA, AMD?

-----

1 more replies
Answer Match 45.36%

I don't really know a lot about upgrading my computer. Any help would be great. Thanks.
 

A:Budget upgrade for HP/Compaq Presario CQ5000 Series Desktop CQ5802

I forgot to mention I am trying to make it run games like CS:GO and DayZ at a reasonable level.
 

4 more replies
Answer Match 45.36%

I have the above PC and was hoping to increase the Ram size from 2gig to 4 gig.
I had a fruitless chat with Sony tech support (as usual) and they inform me that 2gig is the max for my machine.
The mobo has 4 ram slots 184pin config and at the moment is carrying 4 x 512m memory sticks type PC3200U and was hoping to fit 4x 1gig type PC3200U sticks. Unfortuately the PC takes for ever to boot with 4 x 1gig sticks in.
Can anyone advise if this machine is at its max of 2gig or can the BIOS be pursuaded to see 4gig?

Hopefully I can workout the new 4 x 1gig sticks config, if not I will have to return them to the supplier. Any help would be greatly appreciated.
 

A:Sony Vaio Desktop series RZ30C Model# PCV-RZ30CG - RAM upgrade?

Hmmm....guess my enquiry does not attract the same attention as game machines and building new computers...did get 63 viewers though but no enlightenment.
 

3 more replies
Answer Match 43.26%

I have a set of HP Z210 Workstations with E3-1245-V2 Xeon Cpu's, SSD boot drives and varying sizes of memory from 8-16GB 1600Mghz DDR3 ECC. We use Windows 8 Enterprise for these machines, with Hyper-V enabled.
We get regular driver failures from the 2 sets of USB controllers on the machines (Mainly and issue for the KB & Mouse) that can only be resolved with a full power down (not restart) and a power up. This happens at least once every 1-3 days per machine.
I had gone through the HP support, but they have advised this isn't an issue on their side, and I had agreed all along. I was just hoping to get some traction by notifying them. Anyway, after a lengthy trouble shooting session, we found that once Hyper-V
was enabled, the fault arose.
As it was an Intel chip, they I asked them. They advised that on Windows 8, the drivers are supplied via windows update and that it was not their issue.
So, how can I get this resolved? Not through HP or Intel, surely through MS? Maybe not. Disabling Hyper-V is not desired as I the teams with these PC's are developers and require local visualization. Also, we have templates ready for Hyper-V, I don't really
want to remove Hyper-V and use Virtual box or VMWare workstation. but I am at wits end with the fault and lack of help from the vendors.
Please help.

A:Hyper-V causes Intel(R) Series/C200 Series Chipset Family USB Enhanced Host Controller driver to fail

I have found a work around for this fault with the USB failure - ENSURE YOU POWER  THE MACHINE OFF - DO NOT RESTART.
Its almost like the restart doesn't initialise the device correct, thus causing a failure. 

3 more replies
Answer Match 42.84%

I know it's been posted a s#!+load of times, but I figured I'd go ahead and get something straightforward- all the other posts have been in jungle English, and haven't included the proviso I'm looking for.

Anyways, my situation is that I bought my X1900GT from Newegg around Christmastime, as a present to my ainsel (ownself, for those not familiar). I've been getting kind of disappointed in it recently: It underperforms and often crashes on STALKER:Shadow of Chernobyl and some more modern games akin to it. It also runs hot as Hades.

I'm in the market for a new card. I'd like to go DX10, but the late-production DX9's (7900 series) seem to outperform a lot of the more affordable DX10 offerings (8600 series), especially at higher resolutions, due to the 128-to-256 bit difference. I could splurge and go for an 8800, I suppose, but it would be a hit to the wallet and I'd have to postpone :cough: "Aruban Getaway 2008".

So: I don't want to pass up on the new line of DX10-only Games for Windows (Age of Conan, Crysis, etc.) that have been hyped to all hell just because I stuck with price and performance instead of currency and novelty. I need some help deciding. Then again, I could always wait until DX10 becomes the vogue and buy a cheaper, but better card then.
 

A:Price v. Performance in 7-Series + 8-Series: Advice Needed

Keep what you got and see what's comming next. I have a 8600GT as a stopgap until something better comes out. There has been talk of a Nvidia 256bit card to fill the gap between the 8600's and 8800's. I can't fit a 8800 in my case, if I could I would just get the 8800GTS 320mb now. If I were you, wait for the game to upgrade instead of upgrading and waiting for the game. Your X1900GT is no slouch either.
 

5 more replies
Answer Match 42.84%

All,
 
With the new year, we start a fresh discussion for members to share their order and fulfillment experiences.
 
We are retiring the 2014 thread    Anyone having an active discussion there can find it here.
 
The 2012-2013 tread  can be found here . 
 
 
Here are some common points of frequent discussion:
 

How to get a system fast: Buy an in-stock standard configuration from Lenovo or a Lenovo Partner in your area. Customized systems take longer.
Avoid Credit Holds - ensure that BOTH your bill to and ship to addresses are listed with your CC bank before ordering
Lenovo will not bill your card until order ships - an authorization charge hold to check for available balance may show up when order is first placed.
Estimated ship dates are based on default lead time and can vary from what was displayed on website.
In the US and Canada, Lenovo utilizes UPS for new product shipments
Orders may ship before the Estimated Ship Date
Orders may enter through Alaska and pass through Louisville, KY before traveling on to final address
Cancellation requests may take up to 2 days to process
Requests to change configuration or other aspects of the order may require the order to be rebooked.
Lenovo does not accept payment via international credit cards, except AMEX.

We hope you enjoy your new ThinkPad system when it arrives!

More replies
Answer Match 42%

I have a Pavilion G6 2000 series, I bought this laptop 2nd hand it has a generic cd/dvd bezel that does not stay on. I have found a G6 1000 bezels but I need to know if it will fit before I purchase a replacement that may or may not fit. Help????

More replies
Answer Match 40.74%

Hey,
I want to invest in a SDD to replace my dying westgate harddrive. I've set my mind on Corsair but I want to know the difference between the eXtreme series and the Performance series (http://www.corsair.com/products/ssd_home.aspx). According to the website, X SDDs reads a little bit faster, but the P series writes a little bit faster. The only other thing is that the P series is around 100 cheaper!

So is the X series worth the extra 100?

Thanks.
 

More replies
Answer Match 40.74%

hey there

I have a question, what is a better video card to get?
6800 series or the x800 series?

the graphics card that i have in right now just isnt cutting it for me, NVIDIA GeForce FX 5700 I mainly play HL2, CSS and Doom3. I was woundering what card is gonna give me better fps for those games. i have the specs of my comp here (vv) and i wanted to kno what card(s) would run great with the things that i have.

the specs of my comp are:
Video card:NVIDIA GeForce FX 5700
mobo:GA-8IPE1000 (2.0)
processor4 3.0 Ghz (OC'd to 3.4 Ghz at the moment)
PSU: 420 thermaltake ATX 12V
Cooling: prestock (gonna change very soon)
RAM: Genaric PC 3200 mismatched
HD: Maxtor Dimond MAX+9 160GIG

What do u suggest i should get?
 

A:X800 Series Or 6800 Series

12 more replies
Answer Match 38.22%

Hi I have some Toshiba Tecra M10 series but for some reason the laptop no longer works with a battery attached and just get flashing light on the laptop. It works fine with power but won't swatch on at all with a fully charge battery, I have tried many and it's not the battery. I have taken the laptop apart but can?t find anything that is wrong. So it must be the battery and or charge circuit, resisters, gone on the M10.

Anyway I was looking at a motherboard replacement. On looking about it appears that Toshiba released a M10 and a A10 series. They both look about the same to me with the same fittings but to be sure, can anyone tell me if a A10 motherboard, is the same as the M10 motherboard?

Maybe someone who works with these day in day out hopefully will know. Just don?t want to buy and A10 if it?s not compatible with M10 case and fittings.

More replies
Answer Match 37.38%

I'm hoping to get some info from anyone that has some good stats on these cards.. I've been outa town for 4 days and wasn't near my freind (MY PC) over the release of the New GTX 200 cards.. so sadly I didn't get to see all the info and the Benchmarks for it.. Other than Kingpin's Crazy Vantage Score.. Other than that I just got home and I'm wanting to get the Scoop on these cards. I've been reading a little tonight tho.

Also I'm hoping for some info about the new ATI 4870 and 4850, they are looking VERY nice, and looks like ATI might have finally made something that can actually compete with Nvidia this time around.. (Nvidia's had the Enthusiasts Market for a good Year and a half or so IMO) but I've read only a little about them, from what I've seen they look good but if anyone has some info or links to Info about them, then please share. I kno most the ATI 4000 benchmarks that are out now are not completely trustworth cuz the cards aren't officially here yet. But please post some links and info if you can..

Thanks.

Also What should I do. Buy a cheap or Cheaper used 8800 GTS 640 and SLI them.. or sell mine and SLI 2 8800 GT (G92)'s after price drop becuase of the new series.. or should I try and hold out and get a 260, or should I get a 4870...??

ATI looks good, and now I'm in a Fickle as what I should do, I knew what I needed to do until I read about there new release comin.. now I'm shattered and need to wait for more info.. (I take in a lot before I buy things) li... Read more

A:GTX 200 Series vs ATI 4000 Series...

If you want 8800GT's, the prices have dropped to about $150 average on newegg which is great considering i got mine for $250. Personally, I'm against SLI, but if you're for it and would have to make a purchase now, go with 2 8800GTS g92 as they're averaging about <$200 (MSI's 8800GTS is on newegg for $177) and they provide some performance over the 8800GT. Since the 9800GTX is basically the same performance as the 8800GTS but more expensive, then forget that.

If you can wait a while to make a purchase, I've heard that the newer 9800GTX+ will have higher stock clocks that will deliver better performance with its newer drivers too, and this card comes out in mid-July. It's supposed to be priced around $230 and it's chip is built on 55nm process. This card sounds attractive, but we'll have to wait for solid reviews of the card first.

ATI... I don't like them, so I'm sorry but I can't tell you anything about them.

13 more replies
Answer Match 37.38%

I'm getting really pissed off for the newer games. Some of them requires an Direct X 10 video cards to run it properly. Do you guys think 7900 SLI can run newer games smoothly such as Lost Planet? On my computer I test my system requirements and it failed for recommendations. It says that it requires Dx 10 cards to play smoothly.
 

A:7 series SLI versus 8 series (No SLI

I'm sure you will loose some of the gee wiz graphics not using a DX10 card but so far most game makers have been making games that use either DX9 or DX10. As far as lost planet is concerned here is whats posted on their official forums as supported vid cards.


http://www.capcom.com/BBS/showthread.php?t=15043

The following is a list of video cards that our R&D labs have tested in conjunction with NVIDIA and ATI, and have been confirmed to work.
NVIDIA (DirectX 9)
GeForce 6600
GeForce 7x00 series
GeForce 8x00 series

NVIDIA (DirectX 10, requires Windows Vista)
GeForce 8x00 series

Windows XP 32-bit Driver: ForceWare 162.18 beta (July 5th)
Windows Vista 32-bit Driver: ForceWare 162.22 (July 11th, 2007)
Windows Vista 64-bit Driver: ForceWare 162.22 (July 11th, 2007)

ATI (DirectX 9)
Radeon 1650
Radeon 1800
Radeon 1950

ATI (DirectX 10, requires Windows Vista)
None currently.

For R600 (Radeon HD2900, etc.) cards there is a hot fix from ATI:Click to expand...

the 7900 is showing in that list so it looks like it should work
 

3 more replies
Answer Match 37.38%

Any Idea or ETA for Lenovo Ideapad Y Series W/ New Nvidia Gtx 10 Series ( 1060 / 1070 / 1080 ) ? or New Intel i7 7th Gen Processors??

More replies
Answer Match 36.96%

How do i find the driver for Intel(R) Pentium(R) processor N- and J-series / Intel(R) Celeron(R) processor N- and J-series EHCI USB - 0F34

More replies
Answer Match 36.54%

will the 9 series make the $220 8800gts drop to something like $100 or will it still be $200?
 

A:Will the 9 series cards make the 8 series cards cheaper?

eventually, and then the 10 series will do the same to the 9 series, rinse and repeat. basically as long as its one of the fastest cards the gts will be expensive, when it becomes obsolete (relatively) its price will drop.

from the question i assume you are looking to upgrade, if you want to only spend $100 then i'd say your best bet is an OCed 7600 GT, lotsa bang for your buck, i can run FEAR with pretty high settings with just one of them.
but really, what are you looking for?
 

12 more replies
Answer Match 34.02%

Is the nVidia 4200 ti series older than the nVidia FX series?
I am pretty sure the nVidia 4200 ti series is older than the nVidia FX series, but am not certain. Thanks in advance for any responses.
 

A:nVidia 4200 ti series vs. nVidia FX series

7 more replies
Answer Match 34.02%

I have a Netgear DG834GT wireless router which works fine with my PCs which have G series network adapters. But with my laptop with an N series network adapter the signal disconnected every 20 seconds then reconnected; this was only a problem using it at home everywhere else it connected well. I solved this by using a G series PCMCIA when at home. So far so good.

Now my wife has been given a work laptop which has the same problem. She cant use a PCMCIA because the laptop has been set to stop her installing the software. So should we get an N series router? Is there any reason it wouldnt let us both work PCMCIA-free? And if we should go ahead, any advice on what specs I should get or avoid?
 

A:Replacing G series router with N series router

16 more replies
Answer Match 33.18%

So Dell made a really terrible decision.  They have a transparent strip in the power button for an LED light to indicate if the power is on.  A power indicator is a given in any laptop, no matter how cheap it is.  However, Dell in all of it's genius decided to not include an LED bulb on laptops up to the Inspiron 7000 Series, despite leaving a transparent slot for it.  Seriously, what happened to this brand?!?  Do children make these laptops now?
I want to fix this, as my laptop is no longer returnable and a power indicator is absolutely necessary.  So the only thing I can think of is replacing it with one from the 7000 Series somehow (with some help probably).
This is a Dell Inspiron 5559.  I also have an Inspiron 5547.  Not sure which exact 7000 model I should get the part for...
Are they compatible?
Is there an easier way? Like how Fn+H turns on the hard drive indicator?
Thanks.

A:Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board?

The systems use different case and mainboard designs -- and may even be made by different companies.  The answer in all likelihood is no.
I don't think Apple has produced a Macbook with a power indicator -- the PC vendors are playing follow Apple.

1 more replies
Answer Match 31.92%

If I want to save a word doc or a downloaded program whatever it is to my desktop that is where it goes, except all of sudden it doesn't, Take a word doc and it just did it for a program to. when the word doc is done I go to file>save as>the make sure desktop is in the dropdown box and clicked on and then name the doc and click save. I have did it a million times, but now, instead of showing up my desktop I have to go into my computer>C drive> my documents>owner> then desktop and there it is, I can cut and paste it back to the desktop but why all of a sudden is it saving it there?
 

A:Solved: Windows XP SP2-save to desktop-saves it to the desktop folder not the desktop

6 more replies
Answer Match 30.24%

I GOt a think pad I series of ebay for 10 because it was good for parts/may be fixable i want to start rebuilding laptops its
IBM
model: 2611-410
CPU: pentium MMX,Speed unknown
Ram: Unknown, 128+ suspected (switched for a 128mb ram chip i had not quite sure if its in the right place)
Hard Drive: UNknown( dont care at the moment my goal is to get it to boot a linux live boot cd)
screen Size: 12inch
Optical drive: CD rom, possibly RW
power adapter: None(used one i had laying around)

Those are from ebay listing... except for things in brackets.

But to the problem at hand i thought ill try and put in 128mb ram throw in a linux live boot cd that only needs 16mb but when clicking power button i see nothing on screen just black my first thought because i could hear stuff was maybe the screen is dissconected but im not sure tell me if theres anything i need or if i need to open up and look around...
 

A:think pad I series.

a quick look at the rams the 2 original were 32mb and 64mb but does anyone know what to doo?
 

3 more replies
Answer Match 30.24%

hi people, my miss has only gone and brought a eee pc series (asus 701) with out even telling me she fort she was getting a bargin for 60 second hand, wot a fool she is, ive got it in front of me now and they installed windows xp2 on b4 they sold her it, ive done a driver scan and theres 96 updates that need to done, i havent got a clue if its a clone copy or anything i was thinking would it be best if i just did a clean installation of windows xp3 (boot from usb witch i havent got a clue how to do) or shall i just let it update its self ? PLEASE HELP . she brought this for my 8 year old daughter for Christmas aswell. ive told her to get the money back but she wont. THANKS IN ADVANCE GUYS, (and another thing is i have no usb cd drive to attach to it to boot windows from) it all boots up fine its just all these update what need doing.
 

A:eee pc series

If it currently has Windows XP SP2 installed, you need to install the SP3 upgrade before you do a custom scan at Windows Update/Microsoft Update.

A custom scan will probably display over 100 post-SP3 high priority updates.

------------------------------------------------------------
 

2 more replies
Answer Match 30.24%

Hey everyone. I currently have a GTX 580 and I want to upgrade that. I was going to get a GTX 770 but I'm now considering waiting for the GTX 800 series. Is it worth waiting for the 800's and when do you think it will be released?
 

A:GTX 800 series?

Well supposedly it's coming next year, but since crystal balls don't exist who knows exactly when, maybe in Q1 maybe not, maybe way longer,or if they'll be delayed even further, or how good they'll really be, or if they'll have bugs, or how much they'll cost. If anyone really knows at this point they are not likely allowed to disclose details beyond what I'm sure you've searched on Google otherwise they'd lose their job; and even what may be known now may change as changes and delays happen all the time.

In the end, it's up to you, if you need a new or better card now, buy now, if you want to wait there will always be another generation or series in the works, if the wait is confirmed to be short then sometimes waiting a bit is not a big deal, when the wait is longer waiting may not make sense.
 

1 more replies
Answer Match 30.24%

I know.......another question about which gfx card...blah blah blah.....
Sorry guys, but I just have to ask...
I have my eye on a 'Gainward GeForce 4 PowerPack Ultra 750 128mb 8x xp Golden Sample TI-4800SE' which I can get reasonably cheap 88 (UK)
Is this a good choice (am currently using a GF3 Ti200 64MB) or should I look to a mid range GF FX 5 series, or even a Radeon in the same sort of price range.........trying to get the best for as little as possible, shortage of cash...
I like to play UT2003/C&C General/Mohaa + Spearhead and a few others.
Using XP Pro-Abit KR7A-512MB DDR.
I would be very grateful for your thoughts/opinions...........even if you just say "use Google !!!" etc.......................
 

A:GF4 or FX series ?

13 more replies
Answer Match 30.24%

My HP PSC 700 Series All-in-one printer shows "HP printer disconnected". I have uninstalled and re-installed software, but it doesn't help. Does anyone know if there is a FIX for this problem?
 

A:hp psc 700 Series All-In-One

That so called software, Isit packaged with the printer?
If not, maybe u have the wrong drivers installed or the drivers aren't up-to-date?

Hope that Helps~

 

1 more replies
Answer Match 30.24%

Hey guys,

Hope you're all well, been a while since I was posting. However hope you can help me here.

I recently purchased a new ATI R9 200 series. However when outputting through HDMI the speakers make a 'clicking' sound. It's not rhythmic or in time with anything on the screen. I have the latest drivers installed.

Anyone have any ideas?

Thanks,

M

A:ATI R9 200 Series

Try adjusting volume settings. I had a similar thing with my R9 285

3 more replies
Answer Match 30.24%

Hi,

The CD-ROM of my Mainboard can't be read by windows 7.
What can i do?

My mainboard is ASUS P45 and the CD-ROM is P5Q Series

A:P5Q Series

You could go to the motherboard web site and download whatever you need. What exactly are you needing that Windows 7 can't read?

9 more replies
Answer Match 30.24%

Hope someone can offer some insight. I see where many, if not all the brands, Asus, MSI, etc. have guys asking for vBIOS updates in various forums to solve problems with display. What is the general incompatibility issue? Any light that can be shed is appreciated
 

A:AMD R Series GPU's

EClyde said:





Hope someone can offer some insight. I see where many, if not all the brands, Asus, MSI, etc. have guys asking for vBIOS updates in various forums to solve problems with display. What is the general incompatibility issue? Any light that can be shed is appreciatedClick to expand...

It depends on what you are referring to, there is not real issues with the R series GPU's in terms of display output. Most of the associated problems people are having involve a few things:

Some of the 4k monitors (The AOC for instance) use a very odd way to refresh which caused the display to flicker on the R9 series GPU's which was resolved in a recent patch.

Some high refresh displays using DP

and some others

However I would not worry, most of the problems if any are fixed via patches and catalyst revisions. If the manufacturer has to update something like the this its normally involves something like with their own software or certain things in environments not working together properly. I would not worry, I have done nothing to my PowerColor R9 290X trio and they all work great.
 

4 more replies
Answer Match 30.24%

I've had my P50 for a while now, and I keep coming back to the Lenovo website from time to time, looking at various accessories that I think I'd like to pick up.  However, Lenovo still doesn't list the P-Series in their drop-down menues when trying to tell them which machine you have. Are we supposed to just tell them we have W-Series, and hope we're not asking for a Docking Station, that won't be compatible between the P and W series systems? Does anyone else find it odd, that Lenovo is "hiding" things about the P-Series laptops? Thanks for the input!

More replies
Answer Match 29.82%

Hey all,

I've currently got a second-hand 7950GT which had a voltage inductor break off, meaning I'm going to have to restructure the fans [they will no longer work on the card itself]. This came at a time where I've been overclocking, trying to decrease temperatures, etc.

I'm wondering if, for performance in DX9 games, two 256MB LeadTek 7950GTs in SLi would beat a single 8800GT / 8800GTS / 8800GTX?

I don't have Vista and I don't play DX10 games...yet. For the time being, would paying for a 7950GT at half the price of an 8800GTX and running the two cards in SLi give me a performance advantage?

I could then wait until prices fall on a 8800GTX.

Charles
 

A:2x 7950GT or 1x 8-series?

10 more replies
Answer Match 29.82%

How many of you are running AMD 7000 Series in your gaming PC's. I will really appreciate if you people can tell your benchmark scores cause in reviews they use latest possible hardware which not everyone runs so can't really rely on them.

I've read loads of reviews about these and come to conclusion that 7870 is best bet at the moment to go for as 7970 is way too expensive.

Moment of truth, shall I ditch my 5770 crossfire and buy one 7870 or wait for prices to go down further.

Thanks

A:AMD 7000 Series

I would hold, the two current series out right now Nvidia's as well.
These are stepping stone improvements. I honestly believe the next generation will come quickly (fall/winter)
and will be a much larger improvement in real world performance.

The best numbers to look at would be at hardware compare where they just take the actual features of the card and put them head to head for you.

Honestly the 7970 is a serious beast it actually blows away my current card that handles bf3 maxed without complaint. Which is actually kind of my point too though your crossfire rig should be getting pretty good frames even if it's a middle card that kind of sucks at anti-aliasing. I'm guessing your overall experience gaming is not too different from mine right now. (see my specs)
So why bother getting in a rush?
I could be wrong about this, but I am seriously expecting a 7 series nvidia and a 8xxx ati before the end of the year.
...and at the moment I don't see the actual need to upgrade considering the list of games on the horizon and the fact most of them have rather middle range recommended reqs.

The new bioshock I think is among the heaviest reqs of any games comming out before the end of summer anyhow.

Normally just to be fair I would recommend a nvidia equiv for you.
Right now there sadly isn't one, even the gtx680 is slower not by a huge amount but it is slower, and more expensive. So unless you wanted to play with some heavy physx games I don't really see why you would want n... Read more

7 more replies
Answer Match 29.82%

Hi,

I'm not entirely sure what the root of the problem is here, so excuse me if I post this in the wrong section.

I recently built myself a rig with the help of pcmech.com guys. Specs are:

windows 7 home premium 64-bit
intel i7-860 cpu
diamond 5870
Asus p7p55d mobo
corsair 550w psu
2x2gb corsair 1333 ddr3 ram
intel 80gb ssd
WD black 500gb hdd

The series of problems is explained in detail in this thread (problems start at post ~24).

Cliff's notes on the bugs/problems that lead me to where I am now:

- wasn't sure when to switch (as suggested) my config from sata to ahci, and did so in the bios during the first reboot of the windows 7 install. From what I was told I should have done it before the install of the OS?

- after installing the OS, the PC wouldn't get past the 'loading windows' screen until I detached the secondary drive and formatted it after a proper boot-up

- installed several programs (firefox, games, etc)

- pc crashed during assassin's creed 2, showing a BSoD error that was too quick for me to read/take a photo of. On reboot, it would give me the option of starting windows normally (would only crash/reboot), or repairing windows (which would give me this BSoD):



Uploaded with ImageShack.us

- for whatever reason, one time the system repair seemed to work, giving me this error report on boot-up:


Quote:




Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ... Read more

A:Series of problems with new rig

Hi and welcome to TSF 0x1a error code is related to memory management which could indicate a ram problem,the next 0x6b Bug Check 0x6B: PROCESS1_INITIALIZATION_FAILED
The PROCESS1_INITIALIZATION_FAILED bug check has a value of 0x0000006B. This bug check indicates that the initialization of the Microsoft Windows operating system failed.

Parameters
The following parameters appear on the blue screen.

Parameter Description
1 The NT status code that caused the failure
2 Reserved
3 Reserved
4 Reserved


Cause
Any part of the disk subsystem can cause the PROCESS1_INITIALIZATION_FAILED bug check, including bad disks, bad or incorrect cables, mixing different ATA-type devices on the same chain, or drives that are not available becuase of hardware regeneration.

This bug check can also be caused by a missing file from the boot partition or by a driver file that a user accidentally disabled in the Drivers tab.
If you can get to your desktop please try to follow the instructions here http://www.techsupportforum.com/f217...ns-452654.html and attach to your next post

19 more replies
Answer Match 29.82%

Laptop: Asus K55a Windows 8 64bit

Ok, so last night I spilled a drink over my laptop and I immediately took the battery out, flipped over to avoid anymore spilling and cleaned what I could with a paper towel. Then I took the entire back and keyboard off and dried everything I could with a microfiber cloth (it was barely wet, but just wanted to make sure).

I disconnected the power strip, touchpad strip, and the (i think) keyboard strip. (the biggest strip of the 3)
I booted about a hour ago after reconnecting the 3 and there's a black piece on each that clamps them all down, the largest one has fallen off (I don't see any pieces broken though) - does it re-attach with ease?

When I booted it was fine, but whenever I typed my password: a= aj, j=j\ etc...any idea why?
So I proceeded to take the keyboard off again and try reattaching it (the strips basically).

Now when I boot it says to insert a bootable media drive and press a key again
So its gone from keys not working properly to it won't boot period (other than giving me that error) and I think I've broken a piece

Largest problem: getting that strip to stay in there properly and fix the detached black clamping piece
Minor (for now): why the keys are acting the way they do

Thanks..
 

A:Series of issues

I can't help you with the "clamping pieces", but the key's are doing that because there will still be residue in the KB and possibly the Board inside. How long did you leave until turning it back on again? typically, electronic devices such as laptops/smartphones should be stored in very dry places after a good drying and then start up after at least 5 days+ In my opinion anyway.. I've had some success after 2 soakings.
 

3 more replies
Answer Match 29.82%

I recently build a new computer using a KT6V MS-7021 ATX Mainboard. When I attempt to boot it up, it errors out. The board has an optional Diagnostic LED on the back. The LED lights up with 4 red lights which it says:

System Power ON
The D-LED will hang if the processor isdamaged or not installed properly.

I'm using a brand new Processor, in fact I even tried a second new processor that still caused the same problem. I'm thinking its something else causing the computer to hang. And other ideas are suggestings to what might be the cause would be apreicated.

Thanks
 

A:KT6V series MB help

Is that MSI Products? you should read their FAQs. Please tell us your system specification in brief in here..

Thanks, Lucan
 

4 more replies
Answer Match 29.82%

Hi all, I don't know if it is even possible anymore, but back in the day of the T40, the expresscard slot (or PC card slot?  I don't know what the difference is, if any) could hold many things, including a GPU.  (I even remember discussion of this back when the T510 was new.)  What can the modern Expresscard slot hold?  Can it still effectively mount a GPU?  A card reader isn't necessary with the SD slot underneath it. What do you guys use it for on you laptops (preferably P series, but any would do.) Thanks.




-----------IBM T40: XP PRO SP3, 14.1" 4:3 display, 512MB DDR RAM, 40GB HDD, ThinkLight, DVD.Lenovo Ideacentre H215: AMD Athlon II X2 215, 500GB HDD, 4GB DDR3 RAM, 64-bit Win7, AMD 760G.

More replies
Answer Match 29.82%

I am running Windows 7 build 7000, and I am having trouble trying to get my video card to work. The card is an ATI 7000 series VE PCI. It is recognized only as a standard VGA adaptor. Are there any known drivers out there. I tried importing my XP driver, but it failed to work as well.

A:ATI 7000 series VE

  
Quote: Originally Posted by nightmare


I am running Windows 7 build 7000, and I am having trouble trying to get my video card to work. The card is an ATI 7000 series VE PCI. It is recognized only as a standard VGA adaptor. Are there any known drivers out there. I tried importing my XP driver, but it failed to work as well.


Welcome to the Se7en Forums

Since many things in Vista are compatible with Windows 7, I did a search for a vista driver for your video card and came up empty. If any of our resident gurus know of a trick or two for this, feel free to contribute.

8 more replies
Answer Match 29.82%

So about 3months ago my laptop broke so i wonder what if i tripy investing on upgrading my hp 3400 pro (desktop) than repairing my laptop.... So i was wondering... Can i insert a video card on my hp desktop? I dont know if its integrated or not but plsss i really need help and im really a noob

More replies
Answer Match 29.82%

How can you tell how much GHz a system has when you are taking a look at specs of an advertised system? I can't quite make up that part when I look at the numbers that accompany the i series processors. now I udnerstand all i7s are quad(are they?) but some i5s are quad and some are not... how do you get this too? Anyone care to explain all this?

A:The Intel i series

This should help. Intel web site with specifications.> Buy Boxed Processor

It is a listing of PC CPU's. You need the model and that is it. Such as i7-2600 or i3-2120.
Click the one you want to see the specs on or check mark the "compare" box to see more than one at a time.

5 more replies
Answer Match 29.82%

Does anyone know why;

My old mum got a Asus FM3 laptop with Vista. It has been a nightmare, locking, restoring etc. so as my dad can help (he has Xp on his) I wiped and installed XP Pro sp2 and downloaded all drivers needed from asus.

Problem is everytime I restart the logo etc comes up bright then as all is done the screen goes off (you can just see it).
To make it come back you need to press Blue FN and F7 LCD on then is all fine till restart.

Is there a way to make it just load as normal as she will not see this as an improvement.
 

A:Asus FM3 series lcd off

Sorry but did not feel the need to make a new post.

The other problem is that audio does not work. I cannot find a driver, is this the end do I go back to vista!

Surely a vista laptop can do xp pro!
 

3 more replies
Answer Match 29.82%

IBM THINPAD 600SERIES, TYPE: 2645 PENTIUM 2, WINDOWS 98 2ND EDITION

sometimes, 98 opens fine, 1st time

more often, you get: when switch laptop on, you just get no-where, with irriatating messages:

'error' then it lists these numbers: 00173
00192
00163

at the bottom offers 'ok' or 'cancel'

neither of which get you to 98 anyway
pressing cancel lists those numbers again, with NO options to exit or cancel, etc, & no mouse (mouse is on 1st screen mentioned)

doesn't respond to ctrl, alt delete at this stage have to switch off manually

if you slect the 'ok' (instead of cancel) at the 'error' prompt (the 1st screen which comes up after switch on) it gives you a date check screen, & time etc
& only 'ok' or 'cancel' at bottom

if you select 'ok' it re-boots then offers yet another screen (still no 98) thsi one says: 'off' with an arrow pointing towards word 'on' to which I assumed it is asking me to switch off then on again? no mouse here either

if you switch off, then on again, THIS DOES ENTER 98 OK

how do I stop this silly error sequence prior to 98 screen? by the way, no probs running windows I don't think it is the o/s

when you 1st switch on, top left screen says: 064960ok
with 192 directly below

words: ibm top rt & thinkpad bottom left

but even if you shut windows down correctly it brings the error messages above, sometimes with just 192 but oth... Read more

A:ibm thinkpad 600 series

6 more replies
Answer Match 29.82%

Information about video cards AMD Radeon HD 7000 | System Diary Technology News Blog

- all change..!!

A:AMD 7000 series on the way..

sounds like i'll be waiting on one of the real high end 7900 series

Im not going to get a new gpu for a while anyway ,Im waiting on the Bulldozer cpu

Then a new card and the board im useing i wonder how much more it is going to be improved

1 more replies
Answer Match 29.82%

Hey, kinda serial problem, basically every program on my computer is vulnerable, well has had the error message where it says an error was caused in --.dll. After running a program called "Dr.Watson" I got the following information on one of the errors when one popped up.

OLEAUT32.DLL attempted to read from memory that does not exist. It may be using an uninitialized variable, or it may be attempting to access memory after having freed it.

Adobe Type Manager has altered Windows system files.

Module Name: ATMSYS.DRV
Description: Adobe Type Manager
Version: R v4.00-32S058G06NN
Product: Adobe Type Manager
Manufacturer: Adobe Systems Incorporated

Any help be a big help, thanks.
 

A:.dll series of problems

14 more replies
Answer Match 29.82%

Hello everyone,

Do to some problems with our previous domain, we have decided to move our website onto a new domain.

This new web site will contain alot of new features, resources, tutorials, and more, and is targeted to the growing communities of video game and operating system developers. This will also be the new hosting site for our OS Development Series, for those who have been following it.

We are going to keep the previous site up to redirect our members. The new web site is located here, under our company name:

http://www.brokenthorn.com
http://brokenthorn.com

Please let me know if you have any questions, comments, suggestions, or ideas

We apologize for any inconvenience this has caused. We hope this new comain will not have the same problems as the previous one.

Thank you,

~Mike ();
 

More replies
Answer Match 29.82%

Hello there,
I am thinking about upgrading my current system. I will possibly get the GPU in a about a month or so, and I will buy the CPU and the motherboard and the Cooler possibly during Christmas. Are the FX series gonna be out by Christmas or should I go with the Phenom II x6 1100T BE?

I will be using the:
GA-990FXA-UD3 motherboard
Noctua NH-U9B SE2 CPU cooler

Thanks
 

A:Should I wait for the AMD FX Series?

The FX cpus should be out around september i would think so i would wait if i were you.
 

8 more replies
Answer Match 29.82%

Hello newbie here, my hard drive has 'locked' so it says , the hard drive came preloaded with windows 7 home, my question is,if I install a new hard drive and use my Lenovo recovery disc will I be able to install Windows 7, sorry if I seem to be a nummie but this is all new to me as I am a 'silver surfer'. Thanks for any help.
 

More replies
Answer Match 29.82%

Como to think of it, both HP and Dell have kind of entertaining and marginally convincing videos/case studies of companies using their workstations (Dell with I think some photographer and a car manufacturer; HP with some 4k video producer). is it me or Lenovo P series does not have an analog video campaign of people/industries using their workstations? I for one, would find such case studies interesting.  edited:sorry; just found a few...(mod, delete at will).http://www.thinkworkstations.com/customer-testimonials/ 

More replies
Answer Match 29.82%

I have two D-Link DIR-655 XTreme-N Gigabit Wireless Routers. Pretend, for my explanation, that there is no wireless activity, because that's not where the problem is.

My cable modem is downstairs, connected to the first Router (I'll call it "Router A").
Router A is connected to a few systems, and the router upstairs ("Router B").
Router B is connected to a few systems.
No systems upstairs can connect to the intenet, I believe because of a communication error between the two routers. Internet works fine downstairs.

So to summarize Router A can find and access the internet, but Router B, connecting through Router A cannot. I thought that the upstairs router would be able to access through another router the same as any other connection, but it can't for some reason.

I want to find out how to run these two routers in series so that I can have mulitple connections in each end of the house. Can anyone give me some insight into how to set this up?
 

A:Two Routers in series

Each of your routers need to be setup individually, and not through each other.
Once setup, plug the one router into the other. You should have no problems.
But your system would be happier with a switch or even a hub.
Are Router A and B the same brand? When each is used alone, do you get the same readings? Do you have VPN? or other security that could be blocking the second router out?
 

11 more replies
Answer Match 29.82%

I hooked my hp pavilion up after moving and a series of 7 or 8 beeps comes on when i turn on tower.nothing comes on the monitor

A:series of beeps

What is your pavilion number,is it 7 or 8 beeps?

1 more replies
Answer Match 29.82%

Hi all just joined and need help. Just bought an ASUS A8V Ai series VIA K8T800pro+ VT8237 motherboard to put my existing ram, agp graphics card and Athlon 64 X2 4400+ processor in. The motherboard doesnt recognise the CPU so I need to update the bios but for the life of me cannot do it.

On Motherboard it says its A8V Rev 2.00, on the box it says A8V-EAYZ and at startup it says A8V ACPI, Rev 1001, at another screen it says RV570 BIOS 702m/581e and again VIA VT8237 South Controller Rev A2.

I know I need to rename the update bios file and put onto floppy but have tried every combination above and at startup I hit Alt and F2 and it reads the floppy but the system does not recognise it, just says bios not found on floppy.

Desperate for help on this please.

A:A8V Ai series motherboard

I think your prob is your M/b is socket 939 and you CPU is an AM2. Ifso they're not compatible.( excuse me if I am wrong).
With regard to the Flashing I came up with the same prob on my Asus, from memory during the process the name changes, I then changed it to the original. Sorry if that sounds a bit hairy but its been a while since I had this happen.

2 more replies
Answer Match 29.82%

It takes 6 minutes to boot my PC (Dell Dimension 4600 series, Windows XP) after I installed above printer. After windows logo appeared a cursor starts blink on the blank screen and stays there about six minutes. But If I removed the USB cable that connect the printer this does not happened. help.
 

A:HP 7300 Series All in one

Chandare said:

It takes 6 minutes to boot my PC (Dell Dimension 4600 series, Windows XP) after I installed above printer. After windows logo appeared a cursor starts blink on the blank screen and stays there about six minutes. But If I removed the USB cable that connect the printer this does not happened. help.Click to expand...

Hi,

My name is Todd and I work at Dell's corporate headquarters. My team works with customers via blogs and forums. I saw your post and wanted to see if I could help.

Have you tried any other USB devices in that port to see if it happens with any other devices and isn't specific to the HP printer?

You may also want to go into your system setup (F2 during startup) and check the boot settings for the system. That system may be incorrectly trying to boot from a USB device and until it isn't able to it "hangs".

Let me know if other devices have the same problem or if you've been able to resolve the problem.

Thank you,

Todd

Customer Advocate
Dell, Inc

http://direct2dell.com/one2one/archive/2006/11/19/3648.aspx
 

1 more replies
Answer Match 29.82%

Can't get my scanner to work...reinstalled, checked config. - all okay. Says.."cannot detect". It's plugged in...worked last week. It's a 6200 series scanner not a 600 series. I need to learn how to proof...Thanks for any ideas ya'll may have...The exact error message I'm getting is - SORRY, SCANNER COULD NOT BE INITIALIZED. [SCANNER NOT FOUND]

[This message has been edited by JennyP (edited 09-29-2000).]

[This message has been edited by JennyP (edited 09-29-2000).]
 

A:HP ScanJet 600 series

I'm assuming that it does have power and that the scanner is on correct?
First disconnect the scanner and reconnect to ensure proper connection. To wit, a visual inspect is not good enough...
Also, when you reinstalled did you do a complete uninstall first? If not do that. Else, you are really just adding a new layer of paint over the old cracking layer, eh?

Don't know much about your series...I'll go look, but is it USB or no? Anyway, keep us posted...
 

3 more replies
Answer Match 29.82%

Hi,
I'm trying to connect a Hp Jornada 540 to my desktop pc using an external ir device, but for some reason the handheld won't recognise the pc and vice versa. I know both devices do detect each other because the ir light flashes as though it is trying to connect but no joy! Both ir devices work as they have been tested with a mobile phone.
Any help will be appreciated
Thanks
 

More replies
Answer Match 29.82%

Does anybody know anything?

release dates?

etc?

i have looked everywhere, cant find anything.

all i can find is what prices to expect.....
 

A:ATI HD 5000 series

Haven't heard anything... probably because ATI doesn't plan on releasing new GPUs anytime soon.
 

24 more replies
Answer Match 29.82%

hello,
I am new here so please pardon if i violate any rules of this forums.
well,i just purchased dell vostro,1088 notebook,with display drivers ati mobility radeon 4300 series.well i just installed some games like war3,need for speed etc.i experienced a black border at sides of my screen.i tried installing latest updates from ati website but none of them works.even 10.4 failed.it gets installed but nothing really happens after the reboot.i tried all the posibility i could and looking for help here.thanks in advance:

A:ccc for ati 4300 series

Due to the fact that notebook manufacturers modify their INF files, you can't just grab the latest drivers from ATI directly. You'll need to use modified drivers.

You can use this: ATI MobilityModder - HardwareHeaven.com
Or you can try: Welcome to OmegaDrivers.net | Official Home of the ATI and NVIDIA Omega Drivers, PC Gaming Drivers and News!

7 more replies
Answer Match 29.82%

Hiya there.
I recently installed Catalyst 7.10 software for my awful god awful graphics card which i wish to burn.) I installed for the purpose that it was taking 256mb from my system memory and was causing me to really lag up in Guild Wars- So i went on to the Integrated Graphics-UMA Frame Buffer section and from a drop down list where it was set to 256mb i tried it with 32, 64 and 128mb settings and clicked apply but everytime they reset to 256mb. This was quite frustrating as you can image. Any suggestions would be appreciated cheers and btw does changing the screen resolution mean that i wont lag as less on gw since im on 1024x768 i think and i should be on 800x600 and what about the refresh rate? thanks

Many Thanks for your time.
 

A:aTi Xpress 200 Series help please.

Best for you to get on the internet and do some research of your equipment. It's fun to look up all of your components. At the same time these questions will all be answered. When you go to New Egg and Tiger Direct, you can read their specifications page: there's a lot of info there. I am going to look up your video card for the hack of it after this post. It sounds like it's an old one. Good luck in your Google'ing.
 

2 more replies
Answer Match 29.82%

does anyone have any info on these cards, i would like to see the 8800GTS drop to at lest 200 when the GeForce 9 Series come out this November. price for the GeForce 9800 GTX will be 549-649 USD. price for the GeForce 9800 GTS will be 399-449 USD. i would like to know more about these cards
 

A:GeForce 9 Series

Nobody knows for sure but it's probably not the 9000 series. It looks like it's going to be the 8700GT and 8700GTS. Good cards (exactly what I need) but they will be between the 8600GTS and 8800GTS 320.

http://theinquirer.net/default.aspx?article=42199

http://www.vr-zone.com/articles/Nvidia_G92_is_GeForce_8700_GTS/5236.html#Scene_1

http://www.hardspell.com/english/doc/showcont.asp?news_id=1359
 

2 more replies
Answer Match 29.82%

This laptop was new April 2003. Was working well (with one excpetion having to do with the CD drive) until a couple days ago. Battery is fully charged and machine is usually run from AC.

Cursor started freezing requiring shutdown and restart from power button. That happened while online as well as offline.

Then restart from power button started to fail to restart the machine: button worked sometimes to restart the computer, did not work on others. Letting it sit awhile sometimes changed a "no restart" event into a "restart without trouble and as usual" event.

Now pressing the power button lights up system status indicators just below screen for a mini second, the hard drive starts to move (there's sound under the keyboard for as long as the lights are on), then the hard drive sound stops and all of the lights go out except what I think (I'm not sure) is the hibernation status light and the AC power light.

Pressing and holding the power button again shuts down the hibernation light and leaves the AC power light on. The screen during all of this is black.

I looked in the Service and Troubleshooting Guide. Startup problems discussed there suggest using the Access IBM button if the operating system does not start. Have tried that: does not work because the trouble shooting directions tell me to use the Access IBM button when the laptop starts and a prompt is displayed on the screen to interrupt start up, and then choose a utilities page for hel... Read more

More replies
Answer Match 29.82%

Hiya,
I have downloaded a whole series of something, and converted them ready to burn, each episode has several files in it. How do I burn the whole series of episodes onto one disc? I just cant seem to do it, have tried clicking and draggng the individual episodes into one file and burning that, it doesnt work, (am prob bein really thick, sorry) have tried with Nero and NTI ( I prefer NTI), what am I doing wrong please?
Emz xx

A:Series Burn To Dvd

Found a guide that will walk you through.http://webpages.charter.net/bacitup/TheGui...VD%20Shrink.pdf

6 more replies
Answer Match 29.82%

Hello I am new to Tech Support Guy and hope someone can help. Sometimes when downloading using uTorrent my download speed disappears completely. Why is this and what can I do about it? Thanks.
 

A:downloading TV series

as you are new and recently signed up - you should have read the rules and agreed to them
you would have seen we are unable to help with utorrents

closing post

http://www.techguy.org/rules.html
P2P and File Sharing - We do not support P2P file sharing applications or web sites where the aim or much of the content is illegally shared copyrighted music, videos, or other files. This includes torrents, Kazaa, LimeWire, RapidShare, Pirate Bay, and the like. Any threads requesting help for such will be closed. Obviously, this does not include legitimate sites like YouTube, Flickr, Vimeo, Metacafe, etc, that have a strong content policing policy. If you're interested in the topic of P2P, you are free to discuss it on our site, but information on how to use these services will not be provided.Click to expand...
 

1 more replies
Answer Match 29.82%

It seems ATI have more cards on the way in the near future.






Quote:
?We are expecting the new ATI Radeon HD 6000-series to be announced later this year, around Q4 2010. After which, we will be releasing our own Radeon HD 6000-series early next year,? said Kenny Chow, a senior marketing officer at HIS


Graphics Cards Supplier Expects ATI?s ?Southern Islands? to Show Up in Q4 - X-bit labs

A:ATI HD 6000 Series GPU's

Hmmm....looks like my waiting may pay off. I was on the fench as to whether to upgrade my 4890 or wait and see what's next on the horizon as the 5000 series seems to have issues.

Thanks

9 more replies
Answer Match 29.82%

Anybody else ever played any of the games?

I own Dragon Age Collectors edition and Dragon Age II and I like the game a lot. I have nearly 500 hours on Origins by itself and about 150 on Dragon Age II.

The new game coming out Inquisition is going to be promising as well. Anybody else planning on picking this up? Thoughts on the future game?

One thing I was kind of disappointed about was the disappearance of the above screen in Dragon Age II. I used that a lot in nightmare mode combat.

A:Dragon Age Series

All of them. Huge fan of DA and can't wait till Inquisition comes out

This is Dragon Age Origins & Awakening...


Dragon Age 2


Dragon Age Origins playtime


Dragon Age 2 playtime


I'm sure some of the stats are higher but these are the screen shots I had. But yeah, huge DA fan

8 more replies
Answer Match 29.82%

so my 7800 gt is dying on me and i think it's time for a new vid card. I was thinking about a 9600 gt i believe is the name and my friend told me i should not get that. he said i should proly try to ge an 8800 gts or the 9800 gtx. i'm not sure which one would be the better way to go. are they both similar in performance or do you guys think i shoudl bite the bullet and get the 9800.
 

A:geforce 9 or 8 series

From the reviews I have seen lately(PC magazine),the 9800 is the
best performing card ever made.
 

1 more replies
Answer Match 29.82%

2 days ago, my computer was running nominal and there was no problem until i downloaded TAP 32 and SecurityKiss. I have a bad habit of force shutting down computer by the power switch. When I rebotted, I had a BSOD. So That was that i chkdsk /p and fixboot. When I Reboot, i get the windows defender error, the rpc error and another error. Up to today these are the problems i faced:

-Software errors
-Taskbar missing or if its visible it doest show the running programs
-Audio Doesnt Work
-Error 711 that deals with internet connection
-Error 1048
-I cannot get connected to some servers like i used to do
-System Restore cannot start

I want to fix this as quick as possible because i have very much important documents to process in 2 days time. Thanks In Advance.

A:Series Of Errors

you are infected. Head over to the Security Section of this forum and post over there. they will help you.

1 more replies
Answer Match 29.82%

Hello. I am new here and I am experiencing some strange pop-ups. Also, sometimes when I perform searches and click on links, I am taken to completely different sites other than the ones that I asked for.

They started randomly appearing yesterday. Here are the addresses. I made them un-clickable and the second address is too long to post.

http:// 67.201.36.16/nolink.html
http:// 66.48.78.222/ron/ronz.php?sid=&numpop=2&nid=2104296954&mid=8678180043&servern=&rurl=http%3A%2F%2Fpopunder.adsrevenue.net%2Flinksed.php%3Fsn%3D1781240505851%26uip%3D130.127.72.123%26siteid%3DSniper34%26clater%3D1%26serverfile%3Dpopnetwork%26ref%3Dhttp%253A%252F%252Fklite.ath.cx%252F%26clicksor%3D%26unsold%3D0%26data%3DrSe_2%25CA%25D1%25D4%25C9%25CF%25CC%25CD%25D5%25CD%25CE%25C6-%257ErOa%255E2%25EC%252A%2526%2526%257B%252B%25CB%25D1%25BE-2%257B%257Eb%2527%252B%252C%2527%25C9%25D0%25C6%25FA%25FE%252C%257D%257D%25D5%25F2%25F3%25EC%25DFD%25FD%257Dn%255D%257E%252F%25E1%25FD%252A-.%252A%25FD%25DA%25D0%25C3%2526sLIoV%2522%25251%252F%25D7%25D2%25BE%25FE%25FC-%25F1%252F%25FAjSls2%25CC%25C52%2524%252A%2528%2521%257D%25D5%25CD%26url%3Dhttp%253A%252F%252F64.246.15.27%252Fron%252Fblank.php
I have Microsoft Antiviruspro 2009. I have run it twice and nothing has been detected. Could I be infected?

Thank you for your time.

A:Series of Strange Pop-ups

Hello, First If you have this Microsoft Antiviruspro 2009 and that is it's name I believe you installed a Rogue application and we need to remove it.So let's run this scan and get a log,thanks.Next run MBAM:Please download Malwarebytes Anti-Malware (v1.36) and save it to your desktop.alternate download link 1alternate download link 2If you have a previous version of MBAM, remove it via Add/Remove Programs and download a fresh copy.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself.Press the OK button to close that box and continue.If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install. Alternatively, you can update through MBAM's interface from a clean computer, copy the definitions (rules.ref) located in C:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes' Anti-Malware from that system to a usb stick or CD and then copy it to the infected machine.On the Scanner tab:Make sure the "Perform Quick S... Read more

26 more replies
Answer Match 29.82%

Right was just looking up some graphics cards for a customer and im wonering how is the 9 series thats supposed to run all games on high settings a lot cheaper than the 8800GTS/GTX/Ultra.?

thanks
 

A:9 series gfx cards.?

Yeah, it is cheaper but it is not better than the 8800 GT/GTS//GTX/Ultra. Price and perfomance wise, it is a great buy but if you're a serious gamer, why not buy an nVidia 8800 GT. I think that it is more powerful and offers more value for money. The ATi Radeon HD 3870 is also worth checking out.
 

3 more replies
Answer Match 29.82%

I need to order a part for my desktop p6115y Pavilion tower. I have the product number and SN number but no where can I find the series number in order to order the part. What is the series number? I would truly appreciate this. I need to order a power on/off switch.thank youlinda











Solved!
View Solution.

A:hp p6115y what series is it?

Hi: Here is the parts list for your specific model PC... http://partsurfer.hp.com/Search.aspx?SearchText=NY438AA I don't see a power on/off switch, unless it is the Power LED holder assembly Part # 499769-ZH1  Here is a link with a picture so you can get an idea what the above part is. I'm sure you can get it cheaper elswhere though.  HP sells the part for $35.00. http://www.impactcomputers.com/499769-zh1.html HP parts store... https://parts.hp.com/hpparts/Search_Results.aspx?mscssid=B1EEC56057764B678D868C0D2B08008C&SearchIn=PartNumber&SearchPN=499769-ZH1

3 more replies
Answer Match 29.82%

So, where do I begin? It all started a few days ago when I booted up my computer like any other day and about 12 minutes later I suddenly get a message within my tool bar area that says something along the lines of, "system 32/"" "'/"' "'/.exe is corrupt". It said to run the "dskchk" application. I sent in the error report to Microsoft where it then sent me a link to the the help page. It said to open up the command prompt and enter I believe "dskchk" then press enter. After that it said to enter another series of commands which I can't quite remember unfortunatley. After that my computer restarted in order to diagnose the problem I believe.

After all that happened my computer restarted but then suddenly gave me the "disk boot error, please insert system disk" problem. Like an idiot I sorta jumped the gun and I think I installed another copy of Windows XP on the hard drive. So now when I boot up my computer there are two versions of Windows XP to choose from. The first one works and is a bare bones version with none of my precious files on it. The second one is what I believe has all my files and everything that I would like to get back. However, it will not let me into that copy of Windows XP.

What the hell did I do and is there any way to save my files?
 

A:A series of problems.

7 more replies
Answer Match 29.82%

Hi Friends,
More than a week ago i have not been able to use my HP 600B series Desktop with serial number-TRF2310LFZ,Product number-B5G17A\BH5 and system BIOS-CO2_712.ROM v7.12.It displays error message-"No boot disk found or disk failed" on a dark screen.

Please how may I resolve this?

Regards.
 

A:HP 600B series

sounds like the HD failed. You should probably hit the HP website for that machine and get a hard drive diagnostic test......but it sounds like that one is cooked.
 

2 more replies
Answer Match 29.82%

We just had another thunderstorm here. I couldn't turn on the PC when I got home 'cuz of
it. My pc, like me, is allergic to voltage spikes. I develop severe allergic reactions to hi voltage/amperage.

I have a half a dozen of the $5 surge suppressors layin' around here. I've seen some that go for $205, with protection guarantee, and am wonderin' if the $5 SS'ers, plugged in, IN SERIES, will give the same degree of protection???
 

A:multiple SS in series...

11 more replies
Answer Match 29.82%

Been having some serious problems with BSOD since I got my computer in December. I'm attaching my minidump files, if anyone could help me out and let me know what my problem is I'd really appreciate it.

I'm using Windows 7 64bit version 6.1 (build 7600). My graphics card is ATI Radeon 4890 with the latest drivers. If there's any other info you need let me know. Thank you all very much.

A:Series of BSOD

  
Quote: Originally Posted by Nate96r


Been having some serious problems with BSOD since I got my computer in December. I'm attaching my minidump files, if anyone could help me out and let me know what my problem is I'd really appreciate it.

I'm using Windows 7 64bit version 6.1 (build 7600). My graphics card is ATI Radeon 4890 with the latest drivers. If there's any other info you need let me know. Thank you all very much.



Twenty three BSOD's is going to take some time. In the mean time I am running the latest 5. Be right back

Ken

EDIT: The first five were a mixed bag. Several were inconclusive (probably crashed before the file could be written), the rest memory corruption.

While I am doing the rest of them for comparision I would download memtestx86, burn it to a cd, and run it for 5 passes at least to test the memory.

Ken


Code:
BugCheck 109, {a3a039d89977b603, b3b7465eebf5dec5, fffff88000d5c7d4, 1}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck 109, {a3a039d89968b664, b3b7465eebe6df26, fffff88000cd41b4, 1}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck 3B, {c0000005, fffff800030a2e9f, fffff88009610060, 0}
Probably caused by : ntkrnlmp.exe ( nt!KiDeliverApc+a7 )
??????????????????????????????????????... Read more

9 more replies
Answer Match 29.82%

Dear HP community: Hello, and a pleasant day. I am having trouble determining what series is my HP Pavilion G6. Viewing the BIOS, my Product number is: A1Z40EA#ABZ. And using this Product number this website give me the model:  HP Pavilion g6-1267sl Notebook PC I wonder what sereis this model belongs to, is it 1000 series? 1200? The reason for this is because I want to purcahse certain parts in this laptop (the lid, and the palm-rest) Please advise.   Warm regards, Mark

More replies
Answer Match 29.82%

I really hate to ask this, but what is the difference between these cards?
I'm looking for a replacement to a 9100 (8500LE I beleive) and want to stay under $150 (or so). I don't need the fastest of the 9600 series, just the best bang for the buck.
I see that there is a 9600SE, 9600, 9600Pro and a 9600XT (I think that is the price order) starting from around $70 up to about $200 (big price spread for the same number.
128MB for memory is ok and it has to have a DVI out along with a VGA out.
Without spending a day or two looking through all the tests any input or would a slightly older 9500 or 9700 be within what I'm looking for?

When I got my 9100 I was considering a 9500, but price stopped that choice. I don't want to sopund cheap, but I have a hard time justfying much over $150 for a video card!
 

A:9600 series; which one?

Stay away from the 9600SE. It is a severly crippled card. The memory bus has like half the bandwidth of any of the other cards you listed which is very important. Any of the other cards are good but I think the XT is supposed to be the best performance wise.
 

5 more replies
Answer Match 29.82%

I bought an I Series 1171-91u 8 years ago.  I tripped over the cord while I was charging my battery and busted to power input off the motherboard.  I got a new motherboard from Impact Computers and although it is a 1300i, I am unable to determine which one it is.  I tried to use auto detect from Lenovo.com Support, but it would not detect my system. How do I get that number?  How can I find out which one I have so I can update my BIOS, I am having some problems and I can't get any good support from the supplier.  Thanks in advance.Samain 

A:How to tell I Series Mobo

Hi Samain, Welcome to the forum!  Sorry for such a late reply, but there should be a label somewhere on the systemboard, generally near the ram slot that will have a FRU number on it.




T61,T42(x2)T41,T40(x2),R40,T30(x2),T23(x3),T21,T20,X20,A31,A21M,600/E/X(multiples of each),770X,i1400(x2),760XL,760ED(x2 w/base),380XD,755CD,750P,360P,365X,560X,701C/CS,730T,PS/Note

1 more replies
Answer Match 29.82%

So I got W7 for a while now and it's great and all that, but if i try to play any CoD(1,UO,2,4/ 5+6 work) it runs smoothly but after about 5-10 minutes it just freezes completely and I'm forced to reboot. I tried with differed compatibility settings, as admin, with differed settings and with a microphone plugged in and nothing changes.

But also, recently i tried to play CoD2 for a while and it would crash as normal but sometimes I could play for a few hours then I quit, then start playing again and then it freezes up again.

Can anyone please help? Else I'm going back to XP.

I'm running W7 Ultimate 64x

A:CoD series crash

Hi afuz.

First ...

HOW TO FILL OUT YOUR SYSTEM SPECS

In the line at the top of www.SevenForums.com you will see UserCP.
That is an abbreviation for User Control Panel.
Click on UserCP.
In the left-hand column, under Your Profile you will see Edit System Spec.
Click on Edit System Spec
You can copy and paste from the output of Speccy, Speccy - System Information - Free Download to fill out much of the info. Be sure to use the Other Info section of your System Specs for such info as your optical drive, your wireless adapter, your speakers, etc.

Do you have the newest video driver for your card?

Are there patches for cod?

3 more replies
Answer Match 29.82%

2 days ago, my computer was running nominal and there was no problem until i downloaded TAP 32 and SecurityKiss. I have a bad habit of force shutting down computer by the power switch. When I rebotted, I had a BSOD. So That was that i chkdsk /p and fixboot. When I Reboot, i get the windows defender error, the rpc error and another error. Up to today these are the problems i faced:

-Software errors
-Taskbar missing or if its visible it doest show the running programs
-Audio Doesnt Work
-Error 711 that deals with internet connection
-Error 1048
-I cannot get connected to some servers like i used to do
-System Restore cannot start

I want to fix this as quick as possible because i have very much important documents to process in 2 days time. Thanks In Advance.

Dell Insirpon 1501 (June 30, 2007)
os: Windows XP SP3
Processor: AMD Turion
Graphics Card: ATI Raedon
HDD: 160GB
RAM: 256KB

A:Series Of Errors

Hello and welcome to TSF.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

1 more replies