Tech Problem Aggregator

Can't update Q5WV1217 1.13 bios to 2.17 bios

Q: Can't update Q5WV1217 1.13 bios to 2.17 bios

When I open setup,it shows: http://imgur.com/a/tR8bRI have acer aspire v3-571G Windows 8.1 Pro

More replies
Answer Match 87.78%

Hello to the BleepingComputer community,First of all I'm sorry I haven't finished some of the steps from the Preparation Guide. It's because these steps require a reboot (e.g. Step 6: Disable your CD Emulation Software - DeFogger will ask me to reboot the machine), and I have a bad feeling about the question if it is safe to reboot in my situation: I'm not sure if I have a type of malware which is ready to infect the BIOS - if it is so, then it could infect it much easier during the reboot process.- If there is a good way to find out what is the problem (and fix the BIOS threat part if it really is present) without rebooting / shutting down this PC, or at least without booting from this hard drive (which I feel is probably infected), then please tell me what should I do.- If you know a place / forum where I can get a specialized help for this (seemingly BIOS-malware related) situation, please tell me where I could go.- If there is no way to move forward, I'll go ahead and risk the reboot, and follow the other steps (steps 6 to 10) in the Preparation Guide, no problem.I kindly ask you to please read below the details of the problem as it occured to me, and the things I have tried so far.The PC is AMD Athlon 64 X2 Dual Core BE-2350 2.1GHz, Motherboard Biostar TA690G AM2 (with AWARD BIOS), 4GB RAM, 200GB SATA HDD, and an ASUS EAH4870 card added a few years ago.It's with WinXP SP3, AVG Free 2012, (standard) Windows Firewall, and it's behind a router.I ... Read more

A:BIOS virus/rootkit? - Unknown threat by AVG - "Bios Update\Award" folders, BS_Flash.sys, BIOS.sys and a dozen of m...

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. Click the Watch This Topic button at the top on the right.

Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.

Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

19 more replies
Answer Match 78.96%

 I am receiving this message when I run sp76205: The system BIOS update file (c:\SWSetup\SP76205\hpqflash\ROM.CAB) is missing or corrupt. The system BIOS will not be updated." SP76205 was just released in June 2016 and I noticed other user are experiencing the same issue with it. Please provide a fix BIOS update or explain how to run this current update...

More replies
Answer Match 76.86%

Hello

My last BIOS update has failed and now my laptop Satellite PrU400 PSU45E is out of order.
I want to use the Crisis Recovery Disk with an USB floppy drive but I don't know the key combination to run the boot-block.
Is anybody can help me?

Best regards

A:Satellite Pro U400 BIOS update failed - What is BIOS Boot-block access

Hi

I wondering what Crisis Recovery Disk do you have ?:|
In my experience the special disk is needed which is available only for ASP technician.
Therefore it?s necessary to contact the ASP in your country in order to reflash the BIOS.

In my opinion you shouldn?t not try any ?Crisis Recovery disks? which you fond in the net? this can lead to mobo damage?

5 more replies
Answer Match 76.86%

My Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers, I was told to stay away from this.

Thanks,
Jim

A:Samsung Bios software update for bios,update fails

Are you getting a direct link from the notification update? Can you post the link/site next time?

3 more replies
Answer Match 76.86%

Hello everyone! I ama new user and i am coming up with this post as I couldn`t find any kind of solution for my problem.Recently I decided to do a reinstallation of my operating system, which also previously was Windows 7 Ultimate (x64). The installation went as usual, and after finishing it I went on to install all the latest drivers from the Lenovo site, for my product. When getting close to installing almost all the drivers i`ve needed, i stumbled upon a new version of the BIOS amnd the drivers and sfotware recommended for my laptop, by the producer. So i proceeded to install the upgrade, restarted the computer when it prompted me to do so, but after the so-called restart the laptop did not boot up as usual. At first it was telling me to not do anything as the BIOS is being flashed and then it was telling me something about some sort of image processing, things that i did not understand at the time (i have never encountered anything like that). After that my screen turned black. I have not done anything for a few couple of minutes as i thought it was supposed to be like that, but then i just force shut it down and unplugged the AC adapter. When trying to boot it all up again, the only thing i got was a black screen and nothing else.After doing a little bit of research it appears that, somehowm i`ve managed to corrupt the bios on my laptop or something, and nothing else would work at this point. I tried to remove the BIOS battery and the ram and then put them all back, trye... Read more

More replies
Answer Match 76.44%

Hi,

I have a old Tecra 9100 with years of good service, and this is my first problem, but is a great one, after a forced reboot the screen shows a BIOS block 1 damaged message. I have tried to repair the BIOS upgrading to the last version I have found, the 1.6 one, but its a Windows version (to upgrade from a running Toshiba computer I think) and when I try to run it in another computer to generate a FDD and upgrade BIOS, I cant, beacuse a Toshiba common modules message.

Its there any BIOS diskette image-archive I can dowload to perform the BIOS upgrade in the BIOS?

Thanks in advance.

A:Tecra 9100 - BIOS block 1 damaged and how to update BIOS?

Hello

All you can find is stuff on Toshiba support page. I don't know where you live but try to contact nearest Toshiba authorized service provider.
They have access to Toshiba database and they can obtain all this for you. Make a call and ask for help. I am pretty sure they will help you to solve this BIOS issue.

4 more replies
Answer Match 76.44%

Dear all, Since the beginning I got troubles with charging - ( 94 % plugged in, not charging). The easiest solution was just remove the battery, but not for HP Omen. I removed battery and destroyed the rubber on the bottom. I had to open the laptop, because one morning I got the massegae that my laptop is overheated and fan does not work properly. Both fans works only during the lounch, when windows works only one fan was in operations, second one never starts again. Looking for the solution in the internet I have found that this can be because of BIOS is not updated.  I pushed F2, checked the the system, everything is fine and then I installed only one version which I have found there.No massages regarding overheating any more, both Fans are working full power and very very loud. Temperature of processors is 30C. In my room 25C.  I followed all instructions, but got massege BIOS update is blocked.I downloaded the most previous version, again BIOS update is blocked.Current version of bios is BIOS version F00 04Sep14.  Can it be solved somehow?     

A:Fan works like a helicopter-BIOS update is blocked BIOS vers...

@YuraL? To better help you we would need the exact model number or product number of your laptop/desktop??? http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00033108 REO

6 more replies
Answer Match 76.44%

Hello all, this is my first time posting here so please forgive any mistakes/oversights. I've just updated my Samsung laptop's system BIOS via their software update program, and my Nvidia GPU (GT 650m DDR3) no longer seems to work. The Nvidia control panel is still there, and it still gives me the option to select which programs use the GPU, but there is no GPU actitivity showing up. Also,I've tried playing Skyrim (which auto-detects the PC's graphics cards) , and the game no longer seems to detect the Nvidia GPU (just the Intel integrated graphics).

My laptop model is NP550PC7, with 6 gig of ram, and an i7 quad core CPU, and the OS is Window 7 Home Premium 64bit.

I've tried looking in the BIOS but I can't seem to find anything related to the GPU or display options. Any help or avice is much appreciated.

A:Problems with Nvidia gpu post BIOS system BIOS update.

Hi,

Have you updated your GPU with the latest drivers?

http://www.geforce.co.uk/drivers

Please navigate to:

Start> Control panel> Swith to icon view> device manager.
Look under "Display Adapters"

Is the Nvidia GPU listed there? If so are there any yellow symbols etc?

Cheers

Dave

4 more replies
Answer Match 75.6%

HP software said there was a bios update and it ran through this one screen said it recommended backing up the bios in case of corruption and it created a partition. Computer will now not boot and as its new I dont have a recovery disk. How is it that an automatic HP update can kill the computer. Anyone know if removing the partition will solve it or if /i have likely lost everything on the C drive. Any help appreciated thanks

More replies
Answer Match 75.6%

I recently took a BIOS update and I later on found out that it has messed up my Notebook. File transfer speed has been riduculously slow, games and movies stutter occasionaly. Everything has changed and it does not look good. Product Info: Model: Pavilion AB522TXOS: Windows 10 64-bit ( updated to the very last) RAM: 8 GBProcessor: i5-6200U











Solved!
View Solution.

A:Downgrade a BIOS update or Optimising BIOS settings

Hey @Rahul_mk,  I would like to welcome you to the HP Support Community. If my reply resolves your issue or answer your question(s),  please let others know this reply was helpful by clicking the Accept as Solution button. I understand that you did a BIOS upgrade but it did not take well to your HP Pavilion Notebook - 15-ab522tx. You mentioned that your Notebook is now slow and games and movies are stuttering.  Many HP Notebooks have an HP BIOS Restore tool that may recover the BIOS from an earlier version and restore basic functionality. Please follow the documentation to do a BIOS reset.  Have you tried to perform a hard reset?Which BIOS version did  you upgrade to? You said that Windows 10 is up to date.Have you tried using the HP Support Assistant for updates also?  You can try following the below steps to reload the factory installed BIOS Setup Settings:In the BIOS Setup utility, select the Exit tab.Select Load Setup Defaults.Select Save Changes and Exit (pressing F5 and the Enter key will also load the Setup Defaults).Press Esc and then Enter to exit Setup.If you require further assistance, I would be more than happy to continue to help you. Please re-post with any information you think may help me find a resolution for you. Please also let me know if the BIOS reset works. If yo... Read more

4 more replies
Answer Match 75.6%

I have a five-month old HP Compaq Presario Laptop, which has been working fairly decently (I've had a few virus scares, and my Norton quarrentined something a twenty days ago). On HP's advice, I just updated the BIOS on my laptop. It's currently stuck at Verifying New Bios Image, and it's at 100% - It's been stuck that way for a half-hour plus. Any advice? What should I do?

A:HP BIOS Update Stuck at "Verifying New Bios Image 100%"

You have no choice but to force a reboot and keep your fingers crossed.

16 more replies
Answer Match 75.6%

Made the huge mistake of updating BIOS. Had small MOBO usb prob, and for some reason thought a BIOS update would do something. Wasn't too worried because Gigabyte touts Dual BIOS pretty strong.

Anyway, tried updating BIOS, then system would not boot, so the Backup BIOS didn't kick in. btw, the MOBO is a Gigabyte GA-K8N Pro.

So I copied the backup bios to a floppy and used the floppy to fix the main bios. OK, now computer would boot, but would freeze up after the desktop icons appear. Actually would sometimes work for a few minutes, but always froze up.

Boots OK to safe mode, even to the point of getting online, so I downloaded the old bios from Gigabyte, put them on floppy and used that to update the main bios. Same result.

Also did a system restore from XP Pro Safe Mode (because XP wrongly states that this can be undone; didn't find out that System Restore done from safe mode cannot be undone until I tried to undo!).

My tech support (ABS Computer; they rule) thinks that the BIOS is now fine, that some windows files are corrupt and a re-install will fix problem and mobo is probably fine as well. I'll buy that.

anyone have any miracle suggestions before i re-install? Is a repair install worth a shot? Really not looking forward to re-installing all my software and putting all my data back where it belongs to get my email hist., bookmarks, etc. back.

thanks - I will now write the following 500 times: LEAVE THE BIOS ALONE! even with Dual BIOS
 

More replies
Answer Match 74.34%

I have a Lenonvo H50-55 desktop with an AMD A10-7800 APU (3.5GHz), 12GB RAM, 2 HDD's, and an Nvidia GTX 750 video card, running Windows10 Home x64. My current BIOS  version is IRKT54AUS, and the latest available version on Lenovo's update page for my machine is IRKT57AUS. When I try to flash my BIOS from the downloaded update file, I get the error message in the subject. I am starting everything with Admin privileges, but that makes no difference. If it's a Lenovo machine with stock BIOS, why am I getting an "unknown vendor" message? Inquiring minds want to know  TIA!

More replies
Answer Match 74.34%

Hi, I saw the new BIOS version 1.25 dated ?14?.?09?.?2016 appearing on Lenovos support site. I did not check the version I was having on my system before downloading the "new BIOS", so I started the installer and the tool told me I already have this BIOS version. msinfo32.exe tells me I am having BIOS 1.25 dated 13.07.2016. So apparently the BIOS was released already some time ago and I already flashed it to 1.25. So whats the point of re-releasing the 1.25? If there are any changes of todays version compared to the 1.25 released some time ago, is it worth flashing? If yes, how can I do this if the tool tells me I am already having the latest version and it does not let me override my BIOS? Thanks and best regards,Martin

More replies
Answer Match 74.34%

i have a computer i got from my aunt, when the computer starts up, at the top of the screen it says award modular BIOS v4.51PG

at the bottom it says: 08/21/1998-ALADDIN5-2A5KKB0DC-00

i want to know if there is an update for the bios, because i want to use a Maxtor 80GB hard drive.
 

A:Solved: bios update for award bios

10 more replies
Answer Match 71.82%

once the update started it rained go maybe 15 seconds and just shut my computer off entertainment a bloatware screen say that the software ran in to an error and it would restart itself. I let the computer along for over an hour and finally restarted the system muse us in the power button.  once I went to restart the system I only got a blackberry screen my computer is out of warranty and your dell bios update killed my motherboard I called dell they told me in not so many words my motherboard was Fried and they would not replace it.  If I gave some on software I wrote and they installed it and it had no warning it would fry the I computer thatbwould be data to someone's personal property... DELL is this how you value your customers?

A:got the windows 10 free upgrade and used the dell diagnostics tool to upgrade driver and bios everything worked fine until the update of the bios!!!!

I called dell they told me in not so many words my motherboard was Fried and they would not replace it.

Dell just saying it's a "possibility" the motherboard might need to be replace. No one can tell you that motherboard is definite "Fried" without first looking at the system.
What is the system model number and version of windows before upgrading to windows 10? Example: Dell Inspiron 3543, windows 10
You're able to boot into BIOS(F2 key) and diagnostic (F12 key) ?
1. Power off computer
2. Power on computer, quickly start tapping F2 key ( BIOS) or F12 key( BIOS) continuously

3 more replies
Answer Match 71.82%

once the update started it rained go maybe 15 seconds and just shut my computer off entertainment a bloatware screen say that the software ran in to an error and it would restart itself. I let the computer along for over an hour and finally restarted the system muse us in the power button.  once I went to restart the system I only got a blackberry screen my computer is out of warranty and your dell bios update killed my motherboard I called dell they told me in not so many words my motherboard was Fried and they would not replace it.  If I gave some on software I wrote and they installed it and it had no warning it would fry the I computer thatbwould be data to someone's personal property... DELL is this how you value your customers?

More replies
Answer Match 71.4%

How do I reset the BIOS or update the BIOS and how can I make the USB drive boot in boot menu? I have been contacting Microsoft multiple times and they need this info to fix my problem.

More replies
Answer Match 71.4%

Model: HP EliteBook 2560pOriginal OS: Windows 7Current OS: Windows 7 64 bit Problem:I tried to update the BIOS using this file:http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5071202&swItemId=ob_167641_1&swEnvOid=405...Released:3 Jun 2016Version F.62 Rev.A After performing BIOS update with sp76188.exe (7.7 MB) the system won't boot. No power problems occurred during the procedure. I have tried creating recovery USB Key, power up pressing Win+b, but the only effect is Caps Lock blinking and CPU fan working. Solutions for Phoenix BIOS won't work, because it isn't Phoenix BIOS, am I right? Do you have any ideas how to fix this? Best regards,macio232 

A:BIOS corruption after BIOS update

Hello, please use the link below to download the link for latest drivers  http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5071202&swLangOid=8&swEnvOid=4060 Please be advised there may be chances you will loose complete data while bios recovery  please download the bios file on empty USB Stick and create USB recovery by running that file from the USB drive then follow the instructions as below: with the USB recovery media inserted on the unit  Turn off the computer.Plug the notebook into a power source using the power adapter.Press and hold the Windows key and the B key at the same time while the computer is off.Still pressing the Windows and B keys, press and hold down the Powerbutton on the notebook for 1 second, and then release the Powerbutton and the keys.  




I'm an HP Employee.The opinions expressed here are my personal opinions, not of HP.Click on Thumbs up if my post helped you.Make it easier for other people to find solutions, by marking an answer ?Accept as Solution? if it solves your problem.Regards,Vijay

2 more replies
Answer Match 71.4%

Now I don't want to shut down or restart my computer because I fear it won't boot up. This is awful. Is there anything I can do to restore my BIOS whilst my computer still works?

A:Just used @BIOS to update my BIOS, it failed at 50%

Argh is there ANYTHING I can do? I'm going to have to leave my computer on permanently otherwise.

5 more replies
Answer Match 65.94%

I am trying to get my system to reconize my new 60gig IBM HDD. It will show 61 in the bios (with incorrect cylinders, heads ect) but only 8.4 after boot up. After searching this site (by the way is great) I have come to realize that I either need to update my bios or attemp to use a "overlay" program. It's all new to me but I have contacted Award Bios for an evaluation on wich update I need (still waiting back from them). I have been looking at EZ-Disc for $19 from there site and it look like it could be a fix also. My main question (s) are should I go with the update or EZ? Does Award charge for the updates? Is this actually a fix? I did a Belarc Advisor profile and come up with this- System Model (I'm not sure what this means) VIA Tech. VT82C692BX, Main Circ. Board 693-596-ITE8661. BIOS- Award 4.51 PG 01/06/00. I'm using Win. 98 SE w/ 500mghz Celeron. Any insight would be appreciated. thanks Jason
 

A:Bios Update or EZ-Bios?

6 more replies
Answer Match 64.68%

Hello,I need a quick info. I would like to update my BIOS. The current version is F.00  - 07/03/2013 and I would like to update it to the F.27 Rev.A - 25/07/2016 version. However, Win 10 (which is the OS I'm using) isn't listed as a supported OS for this BIOS (the latest supported version for Win is Win 8.1 64 bit). I would like to know if I can still download and use the BIOS F.27 Rev.A 25/07/2016 version even though the latest listed OS is Win 8.1 64 bit, while I'm using Win 10 64 bit?Thanks. 













Solved!

View Solution.

A:BIOS update - my OS version isn't listed in the BIOS version...

Dear Customer, BIOS update is for the Chipset and doesnt matter if the unit has WIN 8 or WIN 10.As it says BIOS-Basic Input Output SystemThe BIOS is a computer chip on the motherboard.We still recommend you to update the unit with latest available BIOS VER for chipset to perform better.   Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

2 more replies
Answer Match 62.16%

Hello,

a friend gave me his HP DV6500 Notebook to fix it. He said it made an update and then for hours nothing happened. He shut it and started again.

I could see that it tried to recover 2 times. The second time it was successful but it somehow resetted or returned the Vista to a fresh install!!! His data was locked in a previous User account, I backed it up on a usb-stick with a linux live cd.

I can't make a reinstall because now a bluescreen always appears even when I boot from Vista DVD.

ntoskrnl.exe corrupt when try to boot vista in the normal way.
How can I fix that without being able to use the repair option of the DVD?
Sorry, the title of the thread is wrong. I figured out already that the BIOS version is for an Intel. So everything is ok with the BIOS actually.
 

A:Solved: HP DV6500 Notebook wrong BIOS update by HP update function?

Ok, I could fix it after following instructions from this page:

http://www.delmartian.com/nullpoint...0C1F5-0xC1F5-C1F5-BSOD-CLFS.SYS-KB946084.html

The Txf-log had to be removed and afterwards I was able to use the repair function of the Vista DVD again.
 

1 more replies
Answer Match 61.74%

Hi Guys,

I have a REAL newbie question. I?ve tried reading a bunch of tutorials, but they?re a little over my head. I think my question is pretty basic, but after a couple hours research, hopefully someone here would be kind enough to help.

I have an M2A-VM motherboard and my system keeps freezing up, no input from keyboard or mouse, no ctl-alt-del, nothing. It freezes intermittently, but never goes more than 3 hours without freezing, sometimes freezes in a few seconds, with 5 ? 10 minutes being the average time it works before freezing. Seems to freeze more (often immediately) when I?m using the mouse than any other time, but it will freeze on it?s own, just idling, if you give it enough time.

I?ve read a few things including updating bios and downloading the latest motherboard drivers. My problem starts when I go to download the mobo drivers from this page:

ASUSTeK Computer Inc.-Support-

It lists 41 driver updates there for my motherboard:

41 files found

Qualified Vendor List (1)

BIOS (20) [BIOS History]

BIOS-Utilities (1)

Chipset (1)

AUDIO (1)

LAN (1)

Utilities (2)

Manual (14)

And apparently I?m ?missing? these Windows Updates:

Q934062 - Important
Q936960 - Important
Q950130 - Critical
Q951550 - Important
Q951944 - Important
Q973923 - Moderate

Question #1: Do I download all 41?? Surely my machine can?t need 41 updates? How do I know which ones to download and install?

Question #2: ... Read more

A:Windows Update INCLUDES Motherboard Drivers and BIOS Update on M2A-VM?

I have the same board on another pc.

You only need to download and install only that which would make your setup current.

You really only need to update the bios if you will be moving up to a newer processor that is not currently supported by the current bios or if the newer bios fixes a known problem.

You need the latest motherboard chipset driver. (I would install this first if you haven't already)

You need the latest LAN driver.

The audio driver you can either download from Asus or from RealTek.

4 more replies
Answer Match 61.32%

Hi.

My Sat M30 laptop start with an bios error. The error says "Resource conflict, edit bios setting or boot" If select "boot" computer hangs before windows completely starts. I remove the wi-fi and the modem module and the same error appears. I can't upgrade the bios because the windows don't start. The bios version is 1.7. The laptop is UK version. If select "edit bios", bios start but I can't find any resource management.

Thanks

(sorry for my english, I am from Spain)

A:Satellite Pro M30 Bios error Resource conflict - Edit bios setting or boot

Hi

I think the error ?edit bios setting? means that you should access the BIOS and should set the BIOS back to the default settings.

Please do this, save the settings and try to boot up!

7 more replies
Answer Match 61.32%

I have a Dell Latitude D630. It has an admin password for the bios. Nothing is locked except for the settings. I can't change any of the settings in the bios. It lets me boot to windows just fine though. My question is, since I don't know that admin password for the bios, if I upgrade the bios firmware, will the admin password be deleted? Since I'm flashing the bios, I would think that all the settings will be lost. Is that the case?
 

A:Will upgrading the bios firmware on a Latitude D630 delete the bios admin password?

What?

Didn't you reply here, and say it worked (after the unusual 9th try ) http://www.techspot.com/vb/topic109612-109.html#post747024

Awfully strange!

A bios update can't remove passwords. As You Must Know

Oh and thanks for the extended long Title. I'm thinking this Topic of yours would be best removed? What do you think?
 

1 more replies
Answer Match 61.32%

My laptop has no problem before. Recently I try to install Windows XP. First attempt fail, so I change SATA at BIOS from AHCI to Compatible, success. However the partition that I want to install*Windows XP to is not available.*

So just to test I choose my Windows 7 partition. Since it want to format the partition, I cancel the installation. After restarting windows, it stuck at bios. I restart again and change SAT to AHCI. Restart, still stuck at bios. This time I cannot enter BIOS, recovery or change boot media. Assuming the boot sector has corrupt, will reseating the cmos battery will fix this *problem. Please help. Thanks in advance.*

A:Windows 7 Stuck At BIOS Cannot Enter BIOS or Change Boot Media

Somehow with guidance from Lenovo Community, I solved the problem.

For future reference:
1. Take out HDD, battery, plug off ac power.
2. Restart, change SATA Controller in BIOS to compatible, restart.
3. Check whether the SATA Controller is Compatible or AHCI. If Compatible, force shutdown laptop.
4. Put back HDD, boot with Windows 7 Recovery CD or Installation Disc.
5. Choose Autostartup Repair.
6. Restart.

1 more replies
Answer Match 61.32%

 The computer wont start.   After pressing "ON" one can hear a vibration sound, it turns on an orange LED.   Stays black for two  minutes; then screen does light to a dim night-blue color.     This is for a Split x2 13-g110dx (windows 10 64bit). Already tried:  hard reset and going to BIOS (Windows button + "B"). Also tried booting from  a USB drive.   It did not work (see screen below). Any suggestion(s) of how it can still be revived ("do it myself")? Thank you.                                       Screen message  

More replies
Answer Match 61.32%

Im working on a Toshiba Laptop A105-4284, Model #: PSAA8U-0FH02K that froze while trying to flash the BIOS, so I didnt know what else to do but shut it off. Now, when I try to boot it up, it gets stuck in the same place it did during the flashing; on the Toshiba splash screen with the status bar at the bottom showing about 20% complete. I cant get into the BIOS and cant boot into Windows. Other options available on this screen are Press F2 for System Settings and F12 for Boot Menu. Pressing F2 results in a beep and the status bar changing to "Please Wait..." but nothing else happens no matter how long I wait. Pressing F12 doesnt do anything. Pressing ESC takes me to a screen that shows the typical system info -- Phoenix Technologies Version 6.00; Intel Calistoga CRB.T3A Reference BIOS; VERSION.MAK 1.53; (looks like its running POST and recognizes CPU, Cores, No TPM or TPM has a problem, and system RAM and stops there. What is my best course of action?:

- shorting out the CMOS battery (I've tried this on the solder pads marked C88, with no laptop battery, with and without the wi-fi, ram and hdd installed; Im either doing it wrong or its just not working )
- trying to reflash BIOS chip (I tried this; turned the laptop on and held down the 'c' key to boot from cd, but still got stuck at the same place)
- replacing the BIOS chip
- something else?

Any guidance or information you can provide would be greatly appreciated.

Please feel free t... Read more

A:Toshiba A105: Failed BIOS flash; now no BIOS access & won't boot

Im trying to figure out why I've had no replies yet.

Have I asked a stupidly easy question that everyone is rolling their eyes to and cant bear to tell me the answer? Or have I stumped everyone?

I have a hard time believing this is a stumper. I've found the same question posted elsewhere on the net and shorting the CMOS seemed to help. That or removing the battery altogether (its soldered to the board), but I dont think Im doing it right. Can someone give me directions on that?

or is this just a lost cause? :-/

Thanks in advance
 

1 more replies
Answer Match 61.32%

Hello,

I have problems with entering the BIOS and boot. My device requests a password, what can you do? Toshiba service centers in our city is not present. All I could do - press control, tab, control, enter, and the machine gave me PC Serial

Sorry for my English, I used Google translator.

More replies
Answer Match 61.32%

When I turn on my computer yestereday it loaded the post screen briefly than went directly into BIOS setup. When I exit the bios setup the screen goes black flickers than goes back into BIOS setup. BIOS recognized hard drives and cd roms, and boot sequence was correct. I decided to deal with it tomorrow or today.. When i turned it on today it booted to my 2nd harddrive (which also has an OS installed) went into bios booted from my main harddrive and the computer worked fine for about 20 min. I was browsing the web and microsoft outlook kept trying to open eventually everytime i closed it pop right back up couldnt access taskmanager keyboard couldnt type however i could manuever with the arrow keys. Powered down and when i rebooted had the same problem as before.. wont get past bios setup. I have tried reseting the CMOS jumpers but that didnt have any affect. tried booting with soley; each hard drive (separately), cd rom, and with each stick of memory. All running into the same issue. Any ideas?

Specifications....
----------------------------------------------------------------
Home built...
Windows XP Pro SP3
ASRock K10N78M Micro ATX motherboard
AMD Athlon 5600X2
WINTEC AMPO 2GB (2 x 1GB) DDR2 800 (PC2 6400)
XFX Geforce 9800GT 512MB
1TB Samsung HD
500GB Western Digital HD
Liteon DVDRW
Creative X-Fi XtremeGamer
Antec TruePower Trio 650 Watt
 

A:Boots Directly To Bios setup, exiting cycles back to Bios

Have you tried another keyboard?
 

1 more replies
Answer Match 61.32%

Hi, Thanx to shuttles indescript site I have killed my AI61 motherboard, I thought I was getting an executable zip which was actually the flash program + rom and after opening BEEEEEP

Anyway I have a eeprom burner and this eeprom sst39sf020 is right in the list.

Can anyone email me the bios .bin file for this motherboard? (not the file from shuttles site but the old bios file ai61s017.bin so I can flash it using my eeprom burner)

Or at least tell me how to extract the .rom from the exe file shuttle sends

If I get the rom file I will be able to revive this nifty old 750!

PS it appears that shuttle quite sending *.bin bios updates a while ago but if anyone can find ai61s017.bin I would be gratefull

Thanx
Ryan
 

A:(solved) Shuttle AI61 messed up bios, where do I find a bios bin file?

8 more replies
Answer Match 61.32%

Hello , I have a Dell Inspiron 530 running Windows Vista Home. I am trying to access the system BIOS and it has a red password log in screen. I tried to guess and enter several log in passwords including  the word DELL and none of them worked. I didn't want to enter too many wrong passwords because I didn't know if the system would lock me out. Can anyone help me by pass the BIOS log in password or some how disable it ? Thank You in advance.

A:Dell Inspiron 530 BIOS is locked with password requesting help to unlock BIOS

Hi WILSPEAK,
Thank you for writing to Dell Community Forum.
Request you to contact Dell team for the BIOS password either via DellTechCenter in Facebook or @DellCaresPRO on Twitter and they will be able to provide you a BIOS password once the ownership of the system is confirmed.
Do reach back for any query.
Regards,DELL-Akshatha MSocial Media and Community Professional#IWork4Dell

3 more replies
Answer Match 61.32%

Hello,
When I press Restore Settings button in BIOS setting (through F2 when Dell logo is displayed at booting) then the dialog with two options is shown:

BIOS Defaults
Factory Settings

What is the difference about these two options (BIOS Defaults vs. Factory Settings) please?
Thank you.

More replies
Answer Match 61.32%

I had a strange set of circumstances today. I was trying to update my memory from 2 to 4g. My system would not boot with the new memory and the bios gave 3 beeps. After removing the new memory, the system would boot to XP but I had no video. I powered down and powered back up. I now had video but the system would hang. In Safe Mode, it would hang after the following entry system32/config/system. Note I never observed any windows error messages, just the hang.

I used the Recovery Console from an XP CD and did a chkdsk /r and chdsk /f
I also ran fixboot

None of these solved the problem.

I then ran fixmbr
Recovery Console displayed some kind of caution message that I had a "invalid" or something MBR and that it might prevent me from access partitions or something.

Well, I ran fixmbr anyway since i was out if ideas.

Now when I try to boot, it is freezing during the post process. When I hit F2 to enter the BIOS setup, it says "entering setup" but it never does. It seems to be hanging right after the drive detect process.
Note I have one standard IDE drive © and 2 SATA drives. Windows XP is installed on one of the SATA drives.

Any ideas? Let me know if you need any more info.

A:BIOS Hang, unable to enter BIOS Setup after running FIXMBR

This sounds more like a BIOS = hardware issue. Since you have been inside the case it is possible something got nudged loose. Re-seat your memory and video card if it is an add-on.

12 more replies
Answer Match 61.32%

I have, or had a laptop purchased 9 months ago, therefore under warranty. Yesterday the ThinkVantage System Update recommended a BIOS update. After the traditional recommendations about what should not shut down the computer, the laptop is reset and started with the update.

During execution, displayed on a screen command, a message "ERROR XXXX. Press any key to continue." After press the key the laptop was freezedy was completely blocked. After an hour without seeing response and no sign of life, I decided to turn it off to confirm the disaster. The laptop was dead.

The laptop began to beep and would not start. Before the panic generated by the situation, I searched the forums where I found several cases that refer to the same problem and the insinuation that makes LENOVO about the customer's responsibility to avoid recognizing the warranty.

I was not looking for a BIOS update, it was recommended by ThinkVantage System Update, the software executed it and damage the equipment.

Besides being a damage caused by the ThinkVantage System Update, the situation gets worse when the answer given by support insinuates that the customer turn off the computer, so it is a CID (Customer Induced Damage) and therefore the guarantee does not cover it. I do not understand how LENOVO may imply that the responsibility of the customer. Really disastrous.

In conclusion, if you are not needing to make a BIOS update, it is preferable to omit the BIOS update messages given to ThinkVantage System... Read more

More replies
Answer Match 61.32%

I have a HP 2000 Notebook PC that goes in a continue loop with a black screen.  The operating system does not load.  The fan works and the led power light is operational.  A current system check reveals the last bios update being F.20 and UEFI update being 4.3.3.3.  I downloaded the most current BIOS on  an USB drive and attempted the BIOS update.  The BIOS upgrade did not recognize the usb drive and I was unable to load the update.  I downloaded the most current UEFI firmware and want to know how to upload it.  Can anyone provide some assistance?  Thank you and have a great day.

More replies
Answer Match 61.32%

Trying to download these updates. Have left computer on for hours to allow them to complete. It never does. Now I read in another post don't update for updating's sake. If that is the case, how can i tell the HP Support assistant (down in the right hand corner) to ignore these?

More replies
Answer Match 61.32%

Hi everyone, I tried getting to the advanced Bios setup under Bios menu but couldnt find it. The Bios version of my Pc is insyde F.1B. please what can i do ?

More replies
Answer Match 61.32%

I tried to booting the computer and received the Award Boot Block Bios and BIOS checksun error. It detects the cdrom but I dont have the CD. Where can I get the cd, like where to download it.

HP Media Center
Windows XP SP2
Motherboard: ASUS P5LP-LE (LimeStone)
Pentium D
I don't remember the rest.
I found the site for the motherboard. http://h10025.www1.hp.com/ewfrf/wc/...cc=us&product=470506&dlc=en&docname=c00379422


Backgorund:
I was having some probelms, which the computer wouldn't start at all and a really loud sound the fan made, so I called my insurance, and they came and change the mother board twice and added a new cooling fan and power supply. All this took two months for waiting for the parts and making an appoinment with the tech.

After replacing the motherboard twice the tech told me I'm gonna order new harddrive, I don't think is the motherboard or the fan. Before leaving he suggested me to call me inusrance and tell them that you want a new computer cause its been more than two months and there has been four calls already. So, I called the insurance and got a new computer and kept the old one.

A week after receiving my new computer I took the old one for repair but at didn't at the end after they told me how much it would cost me to get it fix. Now, I'm deciding to do it myself but, I boot the computer and received something about Award Boot Block Bios. I remember the tech putting a cd to the computer when he tr... Read more

A:BIOS checksun error Award Boot Block BIOS

8 more replies
Answer Match 61.32%

So recently I purchased a Galaxy GTX 460 768MB video card. I was previously using a BFG Tech GTX 275. When I first installed the GPU I was on an ASUS P5B Deluxe WiFI Edition motherboard. I am now on an ASRock P64 Extreme4 motherboard. I mention the old mobo because the problem has been the same regardless. So I link the issue to the GPU.

Anywho, the new Galaxy card on boot, displays it's own Bios information before the mobo Bios page shows up. It's actually the first thing I see on my monitor. It just simply displays Galaxy Bios version (etc. etc. etc). It doesn't last for more than 3-4 seconds, but I personally feel it's an unnecessary delay. Especially since I'm so adamant about computer efficiency and I try to get my boot up times as fast as possible. Just a personal hobby I enjoy! So I was curious if there is a way to disable this initial Bios screen? I did many google searches and couldn't find the problem to a a perfect description. Some people did mention that it has to do with a motherboard conflict, but that's why I mentioned bother motherboards. One was old, and the one I'm on now is brand new. I've never purchased a Galaxy card until now, so I'm curious if it's unique to their brand? I've never updated Bios on a video card before and I'm not sure if it'd cure the problem either. Anyone familiar with this situation? Thank you!

Edit: I'll take a picture of the Bios screen and post it quick. I just thought about doing it, but I typed this entire message and I can't ... Read more

A:GPU Bios showing up before Mobo BIOS (slowing boot up time)

It will still have to do it's thing...even if you manage to make it disappear....I have had systems in the past that has done that same thing...if speed is what your after a SSD will do more for that.

6 more replies
Answer Match 61.32%

 Dear all, I'm trying to automate the bios settings with the latest HP Bios Configuration Utility using SCCM 2012.When the task is rebooting the system, I get this message."The following configuration change has been requested"How do I automate to accept this up front? Kind regardsDries

More replies
Answer Match 61.32%

Hi Guys
I restored an image created with Macrium Reflect on my wife's computer (Custom build with Asus P8Z77-V LX mother board) and everything went fine until rebooting when i got to the "Please press DEL or F2 to enter UEFI BIOS settings" then everything stopped.
I have tried F2 DEL F8 F12 just about all the F combinations and nothing works, I have two SSD drives one with Win7 Pro and one with Win10 Pro (not connected at the same time) and neither of them will boot up.
I have tried changing the jumper pins from 1 and 2 to 2 and 3 for 10 sec to clear the RTC Ram in CMOS then returned then to 1 and 2 and tried rebooting...no change so i removed the battery and repeated the jumper pin swap then reinstalled the battery and still no change, cannot get passed press DEL or F2 to access the BIOS settings.
I even downloaded the latest BIOS and updater as shown and put them on a USB flash drive together and tried the Macrium Rescue disk, and still nothing happened and it will not open the BIOS maybe i got it all wrong ?
I was hoping someone here might know how to put it right, i am out of idea's and any help would be greatly appreciated.

System Specs

Intel Core i7 3770K Ivy Bridge 3.5GHz 8MB
Motherboard Asus P8Z77-V LX LGA1155 ATX Motherboard
Memory G.Skill 8GB Kit (2x4GB) DDR3 Ripjaws X C9 1600MHz
Samsung 840 Series 120GB 2.5" 7mm SSD SATA3 530/130 x2 = 1 Win7 and 1 Win10
Storage Drive Western Digital Caviar Black WD2002FAEX 3.5" 2TB 64MB 7200RPM
Graphic... Read more

More replies
Answer Match 61.32%

Computer failed during upgrade of bios. I have followed all the steps to recover bios: taken out battery, pressed windows + B + power, restore screen appears. Computer goes thru bios restore process and verification. When it gets to the 'count down to windows start up' and 'continue to restart button', the computer freezes and does not restart. I have pressed the continue button, nothing. I have let the count down continue and it stops at 1 then nothing.

More replies
Answer Match 61.32%

Hi There,

I just built a desktop with a sabertooth x79 motherboard, and am running Windows 8.1 pro 64-bit. When I click the UEFI BIOS Firmware live tile via the change PC settings>update and recovery>recovery>etc. my computer reboots normally to Windows and will not open BIOS. I have tried accessing it using the delete and f2 keys, but this does nothing either.

Any ideas? I am up to date in terms of my BIOS, and am definitely running UEFI and not legacy.

Thank you so much.

A:UEFI BIOS firmware restart doesn't boot to BIOS

Motherboards - SABERTOOTH X79







Originally Posted by ASUS

2 more replies
Answer Match 61.32%

Computer won't boot after bios upgrade.Quick history- computer was working but was dropped, damaging hdd- verified hdd damage by removing it and connecting it to another computer- verified computer hardware still good by booting and using it from ubuntu live cd- purchased SSD- changed Bios HDD support to Legacy mode so I could install w7- installed w7 64 bit professional- install went great, computer booted in windows, no lan or wifi yet : missing drivers- downloaded drivers and bios update from HP site for my exact machine to USB stick using different machine- installed audio driver- installed bios update, did not tamper with machine at all during BIOS update followed instructions exactly- after bios update  s/w said bios flash was 100% complete computer just hung for 15 min's- repowered machine: only get black screen- holding down F10 while powering up gets white "F10...BIOS Setup Options" text in lower left corner of screen, nothing else happens,I tried holding the windows and B key before powering then for a minute after powering several times, nothing happened. http://support.hp.com/us-en/document/c02693833I repeated that procedure half a dozen times with and without a USB with the BIOS update software on it in a USB slot, no difference.  Does my model support this key combination to load deffault BIOS settings? Do I have any other options to unbrick my machine? Any advice is appreciated.Mike

More replies
Answer Match 61.32%

I have posted a few questions regarding getting samsung 950 pro (NVME M.2 ssd) to be recognized quickly on boot by ENVY 750-170SE cto rom family id #2b4b and it hasn't been resolved.  I am pretty sure that HP will need to create a newer bios than the a.08 version that i have or the lower versioned number a.07 which is available from HP's website (even though it has a newer date than a.08 (this is really strange))  -  How do i go about getting HP to release a beta or final bios that shortens my boot time by 3 minutes?  Am i posting in the wrong area, if so where do i post?  I am not alone with this problem.  see SpearfishX post #21 - and i am unable to post in this forum, it needs to be reopened and addressed - http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Envy-750se-capable-of-M-2-NVMe-u...

A:Bios Upgrade on HP Envy 750-170se CTO bios family 2b4b

@FrozenGamer? If your PC takes 3 minutes to boot in a factory condition then you should contact HP support. If your PC is less than 21 days old then quickly return it.  Without any modifications, your PC should be booting up in less than 30 seconds. I haven't seen any official HP posted information that supports NVMe m.2 SSDs.  Run the HP Support Assistant and see if it picks up a later BIOS update. HP's support number is 800-474-6836 or 800-HPINVENT or online here.  

8 more replies
Answer Match 61.32%

AMD Dual Core processors - updating BIOS?

how do you do this?

thanks a lot
 

A:AMD Dual Core processors - updating BIOS/flashing BIOS?

Flash a BIOS?
You need to download the update from the motherboard manufacturer. Then follow the directions in the readme file that usually comes with it.
 

3 more replies
Answer Match 61.32%

Good evening!
A week ago I reinstalled Windows 7 in EFI mode on my laptop, and now I've got this problem: whenever I turn on my computer after a shutdown, the BIOS says "System Resuming" instead of "Press F2 to enter settings". This makes impossible for me to access BIOS settings. Previously, my BIOS used to say "System Resuming" only after a hibernation. The weird fact is that - as far as I remember - this thing started happening only after a few days.
Can you help me?
Thanks in advance :-)

A:I can't access BIOS settings because BIOS assumes Windows is resuming

Try doing a shutdown command from a CMD window, or Start button / Run
The command is shutdown /s

See if entering the command manually makes a difference in how it starts up

9 more replies
Answer Match 61.32%

Performed a bios update on my dj/music laptop, after restart the screen remained black with wifi light remaining orange and the caps lock blinking twice every so often. Ive tried downloading the bios recovery and throwing it on a usb, under the hp tools and all that jazz. But upon doing the procedure after the power and windows-B the flash drive lights up and flickers then stops and caps lock starts blinking twice again. Im in dire need to fix this cause i have a festival in 3 weeks. Any input or guide to fixing this would be greatly appreciated.

More replies
Answer Match 61.32%

BIOS problem occured when I upgraded graphicscard, see my other thread.
Computer/soundcard boot problems after upgrading graphicscard GTX 960

I started this thread because it is a bios problem.

I downloaded the driver 2.09 from manufacturers website (medion)
motherboard MS- 7728
when i try to flash it says
"ROM file does not match existing BIOS size"

someone knows how to solve this?

A:Flashing BIOS - ROM file does not match existing BIOS size

Kevin someone in the other thread asked what size PSU you have now I am not sure what you have hooked up but one way you can check what size PSU you need (for starters) because what you have looks to be a tad on the small size at 450W - eXtreme Power Supply Calculator - The only power supply calculator trusted by PSU manufacturers and computer enthusiasts

Just enter in as much as you can and the readout should give you roughly what size you need with some margin of error. Now if the result is close to the 450W PSU you have?? then under heavy load it might well be trying to draw more than what is available. Remember the stated output is the ideal and in reality some power is lost with the internal workings of the PSU circuitry/s.
Personally I use a PSU that has at least 25% more than I possibly need and just because it says for example 650W on the label doesn't mean that it is producing 650W continuously the device only puts out what is being asked of it. That is to say if your machine's components are idling at a draw of 200W then that is all a 650W PSU will put out - it is sort of working on a linear scale for want of a better way of putting it.

3 more replies
Answer Match 61.32%

When you go to the following link: http://support.lenovo.com/us/en/downloads/ds018884 and scroll about 3/4 of the way down the webpage, it says that there is a v1.41 version of the BIOS (as shown below), and it also says that v1.41 is the current version of the BIOS, however there is no link to download v1.41 of the BIOS or the accompanying readme.txt file like there is say for v1.40 of the BIOS - see below: Package | UEFI BIOS              | ECP                             |    Release1.41        | 1.41 (8BET61WW) | 1.36 (8AHT42WW)    | Current Release 1.40        | 1.40 (8BET60WW) | 1.36 (8AHT42WW)    | 8buj19us.exe                                                  | 8buj19us.txt Also at the very top of the same webpage, it says that v1.42 is the current version of the BIOS NOT v1.41.  If you look at the Readme.txt file, it indicates that there was indeed a v1.41 of the BIOS released, however version 1.41 of the BIOS is ... Read more

More replies
Answer Match 60.48%

So a few days ago, I had the smart idea to update my Bios. I had brought up System Information and saw I hadn't updated the Bios since 2011 (it's an older computer), so I downloaded the 2013 Bios, and ran the windows installer. Everyone seemed to run fine.
 
But afterwards, the computer would restart at the Bios screen multiple times. Given enough time, it would sometimes get past the Bios screen and load Windows.
 
I tried pressing F2 to bring up the Bios menu, but it would restart before the menu popped up. After probably 4-6 resets, I could bring up the Bios menu.
 
I tried using an USB with the 2013 Bios on it to install it again, but it didn't fix anything.
 
I've heard of different things, like pulling out and putting back in (reseating) the CMOS battery to reset the Bios to the original version. I haven't tried that yet because I wanted to see if there were any other options.
 
Thank you for your time.

A:Computer Restarts at BIOS, often can't even bring up BIOS menu

I am not aware that reseating the CMOS battery will cause the BIOS to revert to the original version.  Nevertheless, have you tried re-flashing the 2013 version again?  If that doesn't solve the problem, maybe you could try flashing the 2011 version?

0 more replies
Answer Match 60.48%

Okay, so I got the laptop from my aunt and she gave it to me broken, not booting up. So I wanna upgrade/downgrade the BIOS and probably will help with the issue. It booted yesterday, but it didn't today. I followed the instructions in this document at Recovering the notebook BIOS using an external device. I currently have a blank non-bootable USB, and whenever I extract the BIOS there, I get "Error IHIS! not support current BIOS" followed with "BIOS did not support InsydeFlash"  May anyone please help me to finally fix this devil. Any help would be appreciated.    And yes, It is on Windows 10 Pro 32 bit. I did a fresh clean install of it yesterday.

More replies
Answer Match 60.48%

Hi,

I've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.

I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.

I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean.
I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.

Thanks,

Earthmanx

A:Bios Clock time changes after every Restart even after replacing Bios

  
Quote: Originally Posted by Earthmanx


...just the Bios clock changes to a random date and time after every restart.


If this is the case then Windows wouldn't change it, though malware might I suppose (and you have checked for this).

Can you otherwise make changes to your BIOS settings that "stick"? If yes, then return/repair is all I can think of. If NONE of your BIOS changes survived reboot though, then I might consider whether that laptop left the factory with its "reset CMOS" jumper in the "reset" position. Dunno if laptops have these, but most desktop mobos do of course.

Oops you said "started a month ago" so my "left the factory jumpered wrong" would not apply.

3 more replies
Answer Match 60.48%

I have the Dell Inspiron 518 desktop with 64 bit Vista, and attempted to update the BIOS to version 1.0.7 last evening.  I closed all open programs, disabled anti-virus, and ran the BIOS update as administrator.  The update began and asked if I would like to update from version 1.0.5 to 1.0.7, and I clicked on the update button.  The BIOS flash began by deleting the previous BIOS and then attempted to install the new 1.0.7 BIOS but produced an error message similar to "error writing BIOS to block," an the only option was to cancel the update.  I knew I did not have any BIOS installed at that point, but my computer was still operating so I made an additional attempt to re-download the 1.0.7 BIOS and re-install it.  No good, it would not even run now.  There was no turning back and no way to reinstall either the previous BIOS or the new one.  Eventually I tried to restart the computer, and it would not start. 
Dell is sending a tech next week to replace the motherboard on this otherwise great computer that is only about two months old.
DO NOT upgrade the BIOS on a Inspiron 518 with 64 Bit Vista to version 1.0.7.  The upgrade does not work and will kill your motherboard.
Art

A:Dell Inspiron 518 BIOS v1.0.7 64 Bit Vista DO NOT UPGRADE BIOS

No it happened to me too.  Dell is replacing the motherboard under warranty but I was told somewhat firmly not to update the BIOS unless advised by a technican.  In my defense the BIOS update was listed as "recommended" under the download section for this unit on the Dell support website.
I would recommend to avoid two phone calls (over 40 minutes each) to tech support and several days waiting for a new motherboard, not to update the BIOS at this time.
Thankfully it is being covered under warranty.

7 more replies
Answer Match 60.48%

I errantly switched the BIOS setting from Raid-AHCI to IEDI while attempting to allow my system to recognize a newly installed SSD.  The plan was to clone my HDD to the SSD as the boot drive, but it wasn't seen in windows.  Initially, was able to see it in the BIOS settings.  Long story short, I switched from Raid-AHCI to IEDI and have not been able to boot the PC since.  On boot, the pc turns on and the fans for the power supply and NVIDIA cards spin, but there is nothing visual taking place on the monitor. It's as if the devices are getting power, but the motherboard doesn't know they are there.  Tried clearing the CMOS (unplugged, took out CMOS battery, held reset button) and that didn't seem to make a difference.  There is supposed to be a "recovery" jumper on the MB (E15), but the pins seem to be missing on my motherboard, so that's not an option.  I'm pretty sure that if I can get the MB back to Raid-AHCI mode, it should respond for me again.  Unfortunately, without access to the BIOS on boot, I have no idea how to do that.  Any and all suggestions are welcome.  Thanks in advance.

More replies
Answer Match 60.48%

Hi
I am running a home-constructed PC (started out life as a Dell, but i had to replace the motherboard and - well, one thing led to another).

Asus A8N-E running NVidia nForce4 with AMD processor
Windows XP professional
Zone Alarm security suite

It's been working fine for a couple of years with the odd hiccup but i transferred to Zone Alarm from McAfee about four months ago, and upgraded to IE7 - security and fire walls seem to be a big part of the problems i've had in the past so i thought i'd mention it.

last week i had the "application error with winlogon.exe" error on log on and I couldn't boot at all. I did a repair install from the XP disk which *Mostly* worked, but now I have no mouse. I am having to tab through the browswer fields to even post this message which is incredibly frustrating!

Odd symptoms:
* IE has rolled back to version 6 (I guess that might be a function of the repair install)
* In the device manager there is NO "mouse and other pointing devices" entry, let alone any mouse recorded under it
* In the control panel, the mouse hardware properties are completely blank (no way of updating driver or getting more inform,ation - selecting the buttons does nothing)
* In Regedit the particular registry key that Microsoft says I should be looking for (at http://support.microsoft.com/kb/142405) which is HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Class/Mouse doesn't even exist in the registr... Read more

A:Mouse Not Detected, bios problem? Can't even get INTO bios on boot

Most likely a bad mouse, or a bent mouse pin, or you are using one of those wireless mouse units, or a cheap usb mouse.

Mouse detection problems are exceedingly rare except for the above... never heard of a mouse being affected by a virus.

Uninstall Zone Alarm if you are using Internet Explorer 7.0 because you will always have problems otherwise.
 

3 more replies
Answer Match 60.48%

Hello:

This is my first post here, so hi to everyone.
I just got an ASUS X401a Notebook and I want to use a flash drive to boot from Linux.
I need to change the sequence in the BIOS so that the flash drive is first choice to boot from.
I have no problem accessing the BIOS utility, but it allows me to alter only some settings. Those in blue colored font I can change those in black font I cannot. What drive to boot from first is in black and not adjustable.
I used command line to work as admin and I also set up a password for admin in the BIOS to access the BIOS utility, but still no go; some things are allowed to be changed some aren't.

Any help is appreciated.

A:BIOS: Can access BIOS utility, but cannot change settings.

Is it asking for a password or something?

9 more replies
Answer Match 60.48%

I have a HP 2760P and I'm running Windows 7 64bit,I did a clean install since I replaced the harddisk, I installed HP Protect Tools. Problem:Most of the BIOS settings are grayed out, I can't change anything. Do I need to login to the BIOS as Administrator or so? When I enter the BIOS I get asked to login.I can only login with my Domain-Account, I can't enter another account name.I therefore login and see the bios-settings.However most settings are grayed out."Set Administrator Password" is also grayed out. How can I enable the BIOS-settings?Do I need to Login into the BIOS as an Administrator? How can I do that, during entering the BIOS it only let's me login as my regular domain-account or how can I even set an Administrator-Password? Thanks and best regards 

A:BIOS settings grayed out, Login To BIOS as Administrator?

leonardlin wrote:I have a HP 2760P and I'm running Windows 7 64bit,I did a clean install since I replaced the harddisk, I installed HP Protect Tools. Problem:Most of the BIOS settings are grayed out, I can't change anything. Do I need to login to the BIOS as Administrator or so? When I enter the BIOS I get asked to login.I can only login with my Domain-Account, I can't enter another account name.I therefore login and see the bios-settings.However most settings are grayed out."Set Administrator Password" is also grayed out. How can I enable the BIOS-settings?Do I need to Login into the BIOS as an Administrator? How can I do that, during entering the BIOS it only let's me login as my regular domain-account or how can I even set an Administrator-Password? Thanks and best regards What I have found is that this situation arose for me when I logged in to the BIOS as a regular user after installing HP ProtectTools and enabling Pre-boot authentication.  I needed to log in as an admin user. However, in my case, I had yet to set up an administrative password for the BIOS prior to setting up HP ProtectTools.  What I needed to do was the following set of steps: 1.  When the system reboots, it SHOULD give you the option to log in to the BIOS as a guest or registered user.  Log in as GUEST into the BIOS instead of a registered user (wierd, but it works).2.  Go to BIOS Security settings and create a BIOS admin password.3.  You... Read more

2 more replies
Answer Match 60.48%

Just a thought......
Currently we build around 80,000 pc's a year here, with a fairly low attach rate of Nvidia Cards (Geforce G210, Quadro 600 and Quadro 2000D). I was just speaking to one of my Taiwanese colleagues who said their new G210 VGA Cards with a UEFI Bios will not work on Windows 7 Machines/Mainboards with a Legacy Bios, and vv, Older G210 cards that we currently have a Legacy VGA Bios won't work on Windows 8 Machines/Mainboards with UEFI Bios.

Is this right ? or am i being a bit stupid..... ?

A:VGA Bios & Mainboard Bios Interaction Win7 vs Win8

Um, I'm not sure I follow but my Asus M4N68T-M V2 ?ATX Motherboard and NVIDIA Geforce GT 220 PCIe Video card both work just fine with Windows 8. Neither one has a UEFI BIOS. I have to admit to having little to no experience with UEFI. I wasn't aware that a Video card had to have or even had a UEFI BIOS.

1 more replies
Answer Match 60.48%

Hello, guys...
Is there such program which decodes or reset the bios password of a Laptop
My laptop in an old Acer Aspire 4715z

I've tried removing the CMOS
But found no jumper. I was suprised that after resetting the CMOS only the Date and Time reset.

I'll be waiting for your replies..
Thanks.

A:BIOS Decoder or BIOS password reset tool

I am sorry, but we cannot help youPer forum rulesNo subject matter will be allowed whose purpose is to defeat existing copyright or security measures. If a user persists and/or the activity is obviously illegal the staff reserves the right to remove such content and/or ban the user. This would also mean encouraging the use or continued use of pirated software is not permitted, and subject to the same consequences.

1 more replies
Answer Match 60.48%

Hi,My Lenovo laptop K2450 wont boot up and always in blackscreen (no boot, no bios, no lenovo logo or anything just blackscreen) when im turn on the power, this happen after im changing some config in BIOS (but tottally forgot what changed). Everything work fine except fan is off after 3 second. Already tried to reset BIOS but nothing happen, then my technician say that my BIOS is corrupt and i need back up for that. Anyone here got BIOS backup for Lenovo K2450? thanks for help.

More replies
Answer Match 60.48%

I updated the bios after I had notified from Toshiba about the Bios v3.50. The process was done by the Toshiba Utility software, and after the reboot there is "Password =" on a blank screen and it not recognise my BIOS password, writing "Not certified".

I have also tried the HDD password but no luck.

What can I do now?

A:Satellite Z30-A-12R BIOS password not recognised after BIOS upgrade

Hi

Before trying to update the BIOS, all passwords should be removed!
BIOS password can be removed by authorized service provider available in your country.

But the unknown HDD password cannot be removed anymore.
In such case the HDD isn?t accessible and cannot be used.

Sorry mate but in my opinion you have only one chance to get the BIOS password removed; you need the ASP assistance.

3 more replies
Answer Match 60.48%

I have ibm thinkpad R51 2887 nq2 series . My system has been crashed as it is not starting.The whole system gets hang after showing the first ibm screen. The bios utility setup is not getting opened through access ibm button . In safe mode it shows that system BIOS and video BIOS is not working and it has been shadowed.sometimes the system gets started ,but after one minute ,it stucks and the whole system paused and nothing happens.It may be the virus attack on BIOS and it also changes the time and date configuration of BIOS. so what should i do .And how i can install BIOS driver to the system.
 

A:Solved: system BIOS and video BIOS shadowed

Did you mark this "Solved"?

It sounds like you need a new CMOS battery.
 

1 more replies
Answer Match 60.48%

DISCLAIMER: Spelling and grammar impaired.I think i spelled that right.

Processor: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz, 2497 Mhz, 4 Core(s), 4 Logical Processor(s)
installed memory: 8.00GB (3.24 GB usable) <--dont ask X86 (ddr2)
system type: 32-bit operating System
OS: Version 6.1.7601 Service Pack 1 Build 7601
System Manufacturer: Gateway <---might be the issue
System Model: FX7026
System Type: X86-based PC
Hardware Abstraction Layer: Version = "6.1.7601.17514"
~~~~~~~
motherboard: intel corp DG33SXG2
chipset p35/g33/g31
SMBIOS Version 2.4
BIOS: intel corp. DPP3510J.86A.0437 <--- issue...this bios seems to be for the DG33bu but even worst it is for vista/xp
http://downloadmirror.intel.com/15063/eng/DG33BU_SpecUpdate04.pdf
~~~~~~~~~
video card: (bfg tech) GeForce gts 250... not that it matters i have it overclocked to
core:750
shader: 1836
memory:1120,
Usually it maintains a temp of 45 in idle,75-80 in game max setting. but at time of error it was factory set. yes, i know that is a bit on the hot side.
----------------------------------------------------------------------------------------------------------
Two weeks ago i could run Skyrim (game, only using it as a base for performance diff) on full detail with a good number of mods. Not any issues, aside from moments of lag from graphics jump/FPS. i moved the computer into a different room. There was no dropping or banging around of unit. On reboot i get the blue screen of death...(this is the ... Read more

A:bios error 1283, wrong bios installed... i think.

It would either need to boot far enough to load the new BIOS via floppy/USB, or the BIOS chip would need to be removed and flashed.
 

2 more replies
Answer Match 60.48%

I have a hp probook 4330s ,Windows 7 ultimate 64-bit , i3 2310m , 4gb ddr3 ram , 250gb sata 2 hdd and intel hd 3000 with 64mb dedicated video memory. So i wanted to increase that memory to 256 or 512mb and i went to BIOS and in BIOS  i couldnt find the advanced tab , so if i may ask how do i increase my video memory or enter the advanced bios tab where i can do it .Advanced bios tab is not priority my priority is to increase my Intel HD 3000 vram to 256 or 510mb if possible, but i thing it is by loocking to some YouTube videos bun non of them could help me so please let me know if anyone knows how to increase my vram , thanks. Sory for bad english i am from Serbia Have a nice day !

More replies
Answer Match 60.48%

we are trying to do a rather off-the-wall thing. the big picture: we have classified data that we want to encrypt on all writable partitions on our hard drive(s). we need to store the encryption/decryption "keys" - two redundant 32 byte entries - for this data external to these drives. one place we thought of was in bios. these keys will be used for every read/write from/to the hard drives, so we would like them be be accessible in the lower part of ram like all other bios data is after bootup (if possible). the keys may need to be changed sometimes at boot-up by a third party application and NOT by entering the standard bios menus, which may be the trickiest part. is any of this at all possible?
thanks!
t.
 

A:How does one write to (and read from) bios without using typical bios menus?

Sure it is, but why do it the hard way? (You would have to rewrite the operating system kernel/drivers to do this unless you are using DOS or something)

There are industry standard solutions like TPM chips on motherboards, smart cards, security tokens, pinpads, hardware hard drive encryption devices..
 

2 more replies
Answer Match 60.48%

 Hi,trying to change BIOS language using HP Bios Configuration Utility but get Error code 6 - Access Denied (failed due to BIOS permissions).BIOS version is THI vA0.08.I can read (get) successfully but cannot change any setting...tried to change other settings unsuccessfully.What am I missing? Do I need to set a password first?

A:Can't change bios language - HP BIOS Configuration Utility -...

I should have mentioned...language is currently Dutch and I would like to set it to English. I removed the * and placed in front of English...essentially following instructions in the manual so that is not the issue.thanks in advance for your help ?

1 more replies
Answer Match 60.48%

My harddrive recently failed and it cannot be recovered. However, now that the harddrive has failed, I can't put any harddrive or ssd in there even if they have working OS' installed. I even tried various OS' with bootable USB's. Freedos is the only OS that seems to run via USB.  I went through the hp support video: "How to update BIOS when windows does not run" but don't have the "Firmware Patching" option is not available as my update utility version is 3.3.7 rather than the 5.something version featured in the video. The exe provided(SP52604.exe) is... well and EXE! I need an iso or bin or something for freedos 1.0 to run it. I have tried using Freedos 1.1 which should run exe's however, I cannot find a bootable image of freedos 1.1 to put on usb.  What else can I do to flash the bios? 

More replies
Answer Match 60.48%

hi there, i am fixing a friends old computer and the hdd was stuffed so i got a new maxtor diamondmax 9 for it. although once installing it i found out that it would only run in udma2 mode (checked it in another computer and it ran at full udma6)
so i suspect that the current bios cannot support udma5 or 6, so i am looking for a bios upgrade for it.
the bios string is 6A69RPRDC-00, the number on the actual motherboard is 35-C960-00-05
thanks for any help, i am really hoping i can make this board work at udma5 at least and not have to settle for udma2.
thanks again
-Moltenz

ps. i just found this
AM-960
04/19/2001-i815-ITE87X2-6A69RPRDC-00 ITE87X2 + Winbond-W39A
at http://www.plasma-online.de/english/identify/serial/mainboard/mb_aristo.html
if that is any help.
 

A:help with updating bios. cannot find bios upgrade - 6A69RPRDC-00

WOW..............

Old Machines.....(just like me... but can still perform to the max lol)

I your Bios has the option of udma up to 6 then generally the bios supports the Mode! and your problem is that the HDD does not support the mode (cant remember if you said it does).

You are probably using wrong criteria for bios upgrade search.
Try WWW.driverguide,com

You Need the MB's Manufacturers Name or at least the MB Chipset and bios Manufacturers Name as well. go to the Computers muanufacturers website (you probably done that already) and search model.

otherwise Download a System info utility from Tech Spot, I use SiSoft Sandra or AIDA32.. (sandra might cause bluescreen on older machines).. Aida problably will have link direct to bios update site. hope this was of some help
 

9 more replies
Answer Match 60.48%

Dear All,
I have a question regarding BIOS upgrades as well as downgrades. First, about downgrading BIOS, is it a safe thing to do? If not, then what makes it not safe? I have Dell Inspiron 640M, with the latest BIOS A10. Not happy with this one due to high pitch sounds coming from the top right hand corner of the laptop. It's been suggested that I downgrade only a couple of revisions back, namely, to either A09 or A08. However, Ive been getting conflicting reports about the safety of downgrading from Dell Tech Support. Some say that it's not done at all, others say that as long as it's only to downgrade back to a couple of previous versions, then risks are not as high as going all the way back to a really early version, such as A03 etc. The risks, I'm told, is in the performance of hard disks. Apparently, if you downgrade to a really early version such as A03, then problems will arise, though I'm not sure what the exact problems are. Moreover, there are those who say that there is no procedure for downgrading and that it is never suggested to anyone to downgrade their BIOS. The notion that it becomes riskier as you downgrade back to a really early version of BIOS such as A03 baffles me, because in my case, prior to doing any kind of updating for BIOS on my laptop, I had version A03, and have not had any kind of improvements, enhancements done to my computer whatsoever. in other words, my computer is the same as when I got it last year in terms of ha... Read more

A:Is downgrading of BIOS safe? How do you know if down or upgrade of BIOS is successful

6 more replies
Answer Match 60.48%

Got a bit of a problem with my housemates pc...
A friend gave him some extra RAM, i checked it out and it was crucial 512mb pc2100 CL2.5, and although it didn't match his exsisting RAM it seemed to me that his mobo would only run the FSB at 200mhz anyway so i went ahead and fitted it.
It worked fine I then noticed his system temp was running a little high (60-65 degrees), so i took his heatsink off and cleaned the

dust and refitted it with some new thermal compound.
I added too much and the temp went up. To nearly 90 degrees.
I shut it dwon as i didn't want the cpu to pop, cleaned it off, reapplied less compound and figured this would work fine.

Now we have the problem.
Most of the time: Power on and nothing happens. No bios, no beeps.
Occasionally: Power on, i jump into the bios, the temp looks fine (30-40 degrees) and then it freezes right there in the bios after about 30 seconds to a minute.

This sounds like a heat issue, but the last temp reading before freeze is 33 degrees.....?
I've double and triple checked that the heatsink is on properly and thats fine. I followed the official guide on how much compound to use (a blob the size of an uncooked short grain of rice).

-----------------------

Here is the info on his system:

Abit SG-72 mobo

Pentium 4 3ghz (SL7PM)
http://processorfinder.intel.com/Details.aspx?sSpec=SL7PM

512mb elixir DDR-400hz-PC3200 (CL3) RAM

Barracuda 120gb 7200rpm HDD

Windows Pro SP2
 

A:System failing before bios. Occasionally freezes in bios.

7 more replies
Answer Match 60.06%

Hi,I have this note book since 2013 it was running windows 8.0  I try to upgrade it to woindows 8.1 with no success. And I saw someone from the forum says if revert BIOS back to old version 01.05 will do. I tried it didn't help. Then I try again to update the bios to newest ver 01.31 .Now the computer take ages to boot up. "One drive shows script err" and can't even go to Store to down load it say "Your PC isn't connect to internet..."  but my internet access and all the program is working just slow.Now what can I do? Go back to old Bios version? How? or you have any suggestion to upgrade to windows 8.1 or windows 10?Any help would be much appreciated. Stanley

More replies
Answer Match 60.06%

hi, i have been hitting my head for long to get the answer of this question... and got no sophisticated answer in my google search, hopefully u guys could help me out..

well, they ask for BIOS UPDATE, gather your bios version n brand name, go for appropriate site nd have update..?
but the question that arise in my mind..(being tech student and encounter this bootstrap loader numerous times) is
BIOS IS A "ROM" CHIP, and so we must only be able to read from it..
then how is it possible to write on it and update the BIOS and more over, in my college books i find.. if u want to update your bios then u have to change your entire chip or sometime even motherboard

hopefully i will find sufficient answer.. thanx for anyhelp
 

A:Solved: Bios update or disk update?

6 more replies
Answer Match 60.06%

I bought this HP Probook 455 G3 and it has just run out of warranty which I intend to renew very soon. I don't like 8.1 or 10 so I spent more than I wanted to and I bought a new Windows 7 lappy that is a business laptop. I always do the recommended updates that I receive by E mail but one I never do which is the Bios update. The last time I did a Bios update on this lappy it wouldn't fire up afterwards. Rang tech help and after going through some troubleshooting it went back for repair. It came back working and luckliy i didn't have many pictures on it.Started from scratch and haven't had a problem since. I am now scared to do the Bios update. And.... Beofre I bought this laptop I bought a Windows 8.1 from HP direct . Hardly use it but update virus protection as necassary and last week there was a Bios update to perform. I also took out another 2 years warranty on it. Same think happened. Last week in fact. Wouldn't fire up afterwards. Again Tech help tried to help but in the end after frequent crashes it went in for repair on Friday. Good job I took out the extra warranty... I am now down to 1 laptop which I do not want to fail on me. I don't seem to have much luck with the Bios updates... Advice please? Is the Bios absolutely essential?

More replies
Answer Match 60.06%

Hello everyone,
I have a question I do not know if it has been answered anywhere so I will ask if it has to please redirect me to the correct link.
I am going to be doing an upgrade on my pc and during this upgrade I am changing out my CPU. Will this require a flash of the bios and if so could you link me to the correct tutorial for an XFX Nforce 680i Lt Sli mobo?

P.S. I don't know for sure if this is required but I am running Win7 X64 Ultimate on a core2duo.

A:Bios Update?

What are you upgrading to?

If you have the latest BIOS then you should be okay, but if you're going to a quad core, then you might need to do a BIOS update as the 680i is quite a few years old now, so might not recognise newer quads.

If you go to www.xfxforce.com and register on there and register your motherboard, you should be able to look at the support files and download any of the latest BIOS updates.

9 more replies
Answer Match 60.06%

I have found out that there is a BIOS update for my laptop. Gateway's website says the update is for xp and vista. i have upgraded my laptop to win7. Is it safe to install the BIOS update despite gateway giving no information regarding whether or not it will work will win7? (when i bought my laptop win7 did not exist)

A:BIOS update

  
Quote: Originally Posted by gohardsupreme


I have found out that there is a BIOS update for my laptop. Gateway's website says the update is for xp and vista. i have upgraded my laptop to win7. Is it safe to install the BIOS update despite gateway giving no information regarding whether or not it will work will win7? (when i bought my laptop win7 did not exist)


Install BIOS update from DOS, not from Win 7.

9 more replies
Answer Match 60.06%

My friend called me today telling me that when he tried to install a new ati 256Mb video card, after installing the software and inserting the new card, the monitor wouldn't come on and when he put the old card back in everything worked fine. He then told me that when he called "tech support" they told him that he needs a new bios chip upgrade as well as a chipset upgrade. I thought that it sounded a little far fetched, because this computer is old but not ancient. It's a pentium 4 1500 MHz with 750Mb of ram. I was wondering if I really needed to update his bios and how to go about doing it because I know it's a tricky task, or if the problem lies somewhere else.
 

A:bios update

7 more replies
Answer Match 60.06%

K I was told I need to update my Bios (a teach said so)... so how can I find out what bois brand I have... hopefully I find the right update lol

A:Bios Update?

The first screen you see when you turn on your computer (the black and white one with the Energy Star logo) will tell you your Bios type and version. If you hit the pause key you can stop the boot and read the screen.

What kind of computer is this? Do you know the make and model number of the motherboard? Why do you feel you need to flash your bios?

7 more replies
Answer Match 60.06%

I have downloaded the correct BIOS update from Lenovo. I have followed the instructions they provided but I cannot update the BIOS. I run the application "o1wjy27usa.exe" with Administrator privileges, but nothing happens. I get a folder on my drive "C:\SWTOOLS\FLASH\O1WJY27USA" with various different files inside, but that's all what happens. In the instructions it states that once I've run "o1wjy27usa.exe" with Administrator privileges I should see a confirmation prompt "Proceed with BIOS update now?". Click "Yes" to continue, but I don't !Am I doing something wrong ? Is there something else I should be doing ?I hope someone can help/assist.Thanks.




Christum, Christus est in Christo

More replies
Answer Match 60.06%

Hi all, I've carried out all of the updates in the 'HP Support Assistant' apart from one: HPConsumer Desktop PC BIOS Update (ROM Family SSID 2B4B) I've tried three or four times to update the above which seems to go through okay, however once my machine has restarted it states the same update is available in 'HP Support Assistant' so I can only presume it hasn't updated correctly. It's always listed in the 'Updates Available' section and won't go away even though it seems to have installed and restarted etc. Any help would be much appreciated. Thanks, Mark Wain   

A:BIOS Update

Dear Customer,  Please try to update manaully from the below link:HP Consumer Desktop PC BIOS Update (ROM Family SSID 2B4B)Type: BIOSVersion: A0.38 Rev.A sp77850.exe (18.7 MB)   Fixes issue where the BIOS recovery function trigger via Win+b key will malfunction and cause the system to temporary display a black screen.- Adds FAN control support for the AMD RX480 and NVIDIA GTX-1080 graphics.- Improves security of UEFI code and variables. HP strongly recommends promptly transitioning to this updated BIOS version which supersedes all previous releases.** After this BIOS update has been installed, previous BIOS versions cannot be reinstalled.  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

2 more replies
Answer Match 60.06%

In my system Intel 440Bx motherboard (i440BX-ITE867-2A69KV31C-00) is installed. Can you tell me what is the maximum Capacity of Harddisk my motherboard can support? And by updating the BIOS it can support more HardDisk Capacity ?
 

A:Bios update

16 more replies
Answer Match 60.06%

ok so here is the deal..... i wanna update my bio's i have the official ones from acer.... now how do i do this without killing my mobo?

A:bios update

Read all the instructions carefully and follow them to the letter. If you have a laptop make sure it is plugged in and the battery is fully charged before you start, may BIOS updates will not start if you are not plugged in. If you have a UPS for a desktop machine make sure it is working. The main thing you don't want to happen is to lose power while doing the update.

Good luck.

9 more replies
Answer Match 60.06%

I installed the newest 2012 BIOS update for my pavilion a6620f. It has Windows 10 OS. Everything runs smoothly until the restart. When it restarts, it says that the computer will boot with default options instead, and the only option I get is to press F10 or let the computer continue booting. Both options lead to a default boot. Do I need to downgrade from windows 10 to windows 7/vista in order to install this update? because it says that the update is for those versions of windows, although not explicitly. Looking for solutions that will let me install the BIOS. EDIT: When it boots up, it says something about a checksum and gives me the option to wait it out or press F10.

More replies
Answer Match 60.06%

Hi guys! I have a dell optiplex GX1, and the latest bios update for it is ver.A10. So the driver download from the dell website makes diskette (floppy) boot copies, and then the install has to run from that floppy. The problem that I dont have a floppy and dont know where to get it from. So is there a way or download of this latest bios update ver.A10 for optiplex GX1, that when executed wil install the drivers directly rather then having to copy them to a diskette and then installing.

Thanks.?

A:Bios update

Why are you wanting to update the BIOS?

Generally it is a bad idea to update that unless the update is designed solve a problem you are having

3 more replies
Answer Match 60.06%

I'm getting an error from BIOS update file sp76205.exe, too: "hpqflash\ROM.CAB is missing or corrupt." It is indeed missing. (this was a reply to the post found here: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/bios-update/td-p/5659132 For some unknown reason a moderator moved my reply...)

A:Re: bios update

Hello @_Ari_? Thank you for posting in the HP Support forum. Welcome ! I have moved your post and created a new dedicated thread for you so that it has better visibility. In order to be able to assist you with the BIOS update, you need to provide your computer model and details about it.   However, I'd like to ask you why  you want to update the BIOS ?   Personally, I do not recommend you do it unless you experience some issues with your existing BIOS and you are sure that the new BIOS will fix it. General recommendation I provide to users/customers is NOT to upgrade BIOS/UEFI unless they experience any kind of specific BIOS/UEFI issue. Updating just for updaing and just for using the latest verson is not solution. Any kind of update (no matter for what and who relesed it) can fix 2 issues but may introduce 10 more issues. Additionally, upgrading the BIOS (for any vendor) poses more risks because BIOS recovery is not that easy as compared to typical software updates IF something goes wrong. Same applies for Windows Updates, OS update, drivers updates, etc - upgrade/update IF you have issues which you know are fixed in the newer version or for some severe security issues. Otherwise, keep the existing version as long as possible.

5 more replies
Answer Match 60.06%

i want to update the bios on my 8460p elitebook but everytime i run the sp76205.exe file i get the error the file is from here ----- http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5056901&swItemId=ob_167767_1&swEnvOid=406...  and i don't know how to update from bootable device help me 

More replies
Answer Match 60.06%

I am trying to upgrade the BIOS on PC to BIOS Update [TS94610J.86A]

When I run it, however, it says it cannot proceed due to a programming or internal error.

Any suggestions?

A:BIOS Update

This really isn't a Windows 7 question, but are you using the correct utility for the bit version you have for Win 7?

My system has a utility it starts from the bios to update the bios. Each motherboard seems to have different ways of doing this, so read the instructions for your motherboard. You may have to create a boot media or use some other utility.

9 more replies