Tech Problem Aggregator

How to download drivers for Model 320-1030 running Windows 7

Q: How to download drivers for Model 320-1030 running Windows 7

After recovering this system, I went to the HP site to download drivers for it. The message I received is that there are no drivers for this model running that OS. I am confused since the original OS on this system was 7.

A: How to download drivers for Model 320-1030 running Windows 7

@BocaRay?, welcome to the forum. Here are the Software and Drivers Downloads for the computer for Win 7. If you haven't done so, you should run HP and Windows Updates, also. You should use HP Support Assistant to check for HP updates. The latest version of HPSA is here. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

1 more replies
Answer Match 75.18%

For this type what can I upgrade my processor to?  I believe it's only a 4GB as well. I need more RAM and processing power. thank you

A:I have an HP TOUCHSMART 320 PC MODEL 320-1030 looking to upg...

Hi, Yes. Please check 2 sections Processor upgrade informationMemory upgrade informationon the following link:     http://support.hp.com/au-en/document/c03026602 Regards.

1 more replies
Answer Match 62.58%

Hello,

I'm having a strange problem. Intel released new drivers to update from version 15.11 to 16.11. I downloaded them from Intel website, ran install, success. When I go into Device Manager to check on the driver version, I see it is still 15.11. I have tried a number of things, including deleting the drivers from the Device Manager and running the install again. However, in this case Windows 8 automatically installs even older drivers, version 14, dated 2011. I'd like to try the new drivers because it takes very long for the net to comeback after I wake up my laptop. Version 15.11 was installed by Windows Update, those drivers are dated January 2014.

A:Drivers update for Intel Centrino Wireless-N 1030

Just disable allowing Windows to automatically install drivers.

8 more replies
Answer Match 59.64%

Hi allI need drivers for HP 110 Desktop PC Series with model no. 110-216ixOS: Windows 7 32 bitThe HP driver page for this PC shows driver only for 64 bit version which doesn't work for meThanks

A:Drivers for HP Desktop Model No. 110-216ix for Windows 7 (32...

Hello KVar, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.I understand you are looking for Windows 7 32-bit drivers for your HP 110-216ix Desktop PC and only 64-bit are avaliable on the HP Website. Unfortunately, HP has not made drivers that meet your requirements. You can try to post the Hardware ID of the devices and I can attempt to locate drivers that are compatible. No promises, but I will try for you. I am providing you with a wikiHow page How to Find Hardware ID, to assist you with finding the hardware ID's. Please re-post with the requested information. Thank you for posting on the HP Forums. Have a great day!

4 more replies
Answer Match 59.22%

Hello everyone , As i request as the title , Full Drivers All it , Thanks a lot!

A:Need Drivers For My Laptop , Model : ASUS S300CA - Windows 7 , 64 Bit!

Hi there ... Did you Laptop come with Windows 8 Installed ? I can only find Drivers for that Model with Windows 8

http://www.asus.com/supportonly/S300...rt_Download_36

Most should work

4 more replies
Answer Match 53.34%

I recently upgraded this old Dell M1530 Vista x64 laptop to Windows 8 Enterprise x64.

Apparently the sound company for it (Sigmatel) went out of business before Windows 7 was even released and their latest drivers are some ancient Vista drivers.

Should I download and install the Sigmatel drivers or continue to use the drivers that come with Windows 8? (They seem to be fine so far, just seeing if there's any other input on this).

Do you think that the Windows 8 drivers would probably be better based on the fact that they're much newer and made to run in 8, regardless of the fact that it wasn't made for my system specifically?

All I've ever really cared about is what has the best maximum output levels. I really hate sound drivers that are very limited in how loud you can make them output. My old laptop (this M1530) is actually better than my current Origin beast laptop in terms of sound because the sound driver on my new laptop (Realtek) doesn't allow very much loudness at all on a set of headphones. The only reason I ever liked the Sigmatel drivers is because they let you turn up the volume until it's so loud it could blow your ears (and your speakers) out.

Or perhaps it's hardware and has nothing to do with the drivers. I dunno, I'm too stupid.

Point is, drivers that came with my system that aren't designed to work with this OS or go with the Win 8 default drivers?

A:Should I download the old drivers or keep the Windows drivers?

There is a saying, "if it's not broke, don't fix it" so I would stick with the working one. You could save the old driver as a backup.

4 more replies
Answer Match 52.92%

I just looking for information on how to install windows 10 on my Touchsmart 320-1030 PC. The PC is only 2-4-year-old and runs great. What steps do I need to take, in order to install windows 10 on this device?

More replies
Answer Match 52.92%

Hello, we have recently purchased several HP Elitebook 1030 G1 notebooks. These come with Windows 10 out of the box, and no discs at all. HP seem to offer a Windows 7 recovery disc via drivers & downloads but this only seems to be for drivers and applications post-Windows 7 install. We still use Windows 7 (Enterprise x64) deploying via SCCM. As the laptop doesn't have a LAN port HP support suggested getting an HP USB-C to Ethernet adapter, but this doesn't seem to help with PXE boot. So moving onwards, I then attempted to do a manual install of Windows 7 x64 via USB. Initially it didn't even boot without turning off secure boot and turning on legacy boot. As the laptop has an M.2 ssd it is not even found by the setup process. I have now gone through adding sata and usb3 drivers via dism to boot+install wim's and also an MS hotfix for NVMe support (https://support.microsoft.com/en-us/kb/2990941). Unfortunately after all this it is still not able to see the hard drive. Unless I am going blind I cannot see any information about this on HP Support. Has anyone done this on this model notebook or similar (ie M.2 ssd)? Thanks

More replies
Answer Match 52.5%

Hi,

Please guide me how I can get a driver for my brother printer HL -1030 for Windows 7. I called Brother office in Canada and they say this printer is not compatible with Windows 7. Is there any other printer driver I can download and get my printer working.

Thanks in advance.

Wonderdollar

A:Brother HL-1030 printer driver for Windows 7

You should be able to use the XP drivers and install them in compatibilty mode.

Here's a link to the XP Home/Pro 32-Bit Drivers
Brother Solutions Center: HL-1030: Downloads: Others

To run the installer in compatibility mode:

Right Click Installer > Properties > Compatibility > Select the OS you want. (In this case, XP)

9 more replies
Answer Match 52.08%

So the title pretty much explains it. I'm running in 64 bit but i cant seem to find 64 bit drivers for it or evidence that they even exist. Please help. Thanks
 

A:Need 64 Bit Drivers for Model: DX-SC5.1

By it i mean Dynex® 5.1-Channel PCI Sound Card the model number is in the title. Thanks
 

1 more replies
Answer Match 51.66%

Hi!!

I get an error message on 2 machines in my domain.

domain: 3 windows 2003 servers.
1 server: DC
2/3 servers: on this I get the error. the both servers are set as member servers.
how I can fix the error on the both machines?

Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1030
Date: 22.09.2003
Time: 10:13:48
User: GICIOLAND\gicio
Computer: JAMESBROWN
Description:
Windows cannot query for the list of Group Policy objects. Check the event log for possible messages previously logged by the policy engine that describes the reason for this.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

regards,
gicio
 

More replies
Answer Match 51.66%

Where can I download the latest Windows 7 64 bit drivers for my V5-531? Everytime I go to the site to download them, the 32 bit drivers are listed but when I try to list the 64 bit drivers it says "Service not available" It would be nice for this service to be available so my laptop can be available for me to use, not just sit there with no drivers.

A:Where to download WIndows 7 64 bit drivers for V5-...

Hi,Thanks for posting here,. sorry that you are not able to download drivers, may I ask like what is the OS installed & was it the same shipped from factory, if yes you can use the Acer Recovery Manager to install the drivers, & also if you could post the exact driver required We may be able to post a direct download link here,. Cheers

1 more replies
Answer Match 51.66%

I want to update my Aspire 4738 Windows 7 Home Premium to Windows 10 Home, but I can't find the proper Windows 10 drivers.Any help? PleaseThanks in advance










Solved!
Go to Solution.

A:Where can I download Windows 10 drivers for my Asp...

pablo_plr,
 
If you have not performed the upgrade already, I would recommend that you go ahead and do so. I upgraded a S3-391 notebook that is not eligible and I did not have to download any drivers, it is working fine. It is ultimately up to you though, but Acer will not be posting any drivers since it is not an eligible model. 

9 more replies
Answer Match 51.66%

Where can I download the latest Windows 7 64 bit drivers for my V5-531? Everytime I go to the site to download them, the 32 bit drivers are listed but when I try to list the 64 bit drivers it says "Service not available" It would be nice for this service to be available so my laptop can be available for me to use, not just sit there with no drivers.

A:Where to download WIndows 7 64 bit drivers for V5-...

Hi,Thanks for posting here,. sorry that you are not able to download drivers, may I ask like what is the OS installed & was it the same shipped from factory, if yes you can use the Acer Recovery Manager to install the drivers, & also if you could post the exact driver required We may be able to post a direct download link here,. Cheers

1 more replies
Answer Match 51.66%

Hey!
I have a acer aspire M1470 and my hard drive is broken. Now i have a new hard drive and i wanna install windows 7 on it, but when i put in the installation disc it says that it needs drivers. Where can i download windows 7 drivers?

More replies
Answer Match 51.66%

PURCHASED NEW LAPTOP HP 240 G3 K1C59PABUT NOT ABLE TO FOUND ANY DRIVER FOR WINDOW 7 32 BIT OPERATING SYSTEM PLEASE HELP ME OUT NOT ABLE TO FOUND ANYWHERETHANX











Solved!
View Solution.

A:DRIVERS FOR WINDOW 7 32 BIT FOR HP 240 G3 MODEL

Hi: Install all the drivers listed under the chipset section. If your model has an Intel graphics adapter, just install the Intel HD graphics driver listed under the graphics section. You need the Realtek ethernet driver under network. You need the Realtek card reader driver under storage. I don't know what model wireless card your model uses, so please do the following and I will figure that out and tell you what drivers you need for that. Go to the device manager and click on the device named Network Controller. Then click on the Details tab at the top of the Network Controller window. Now you see a Property drop down list and it is defaulted to Device Description. Drop down on that list and select the item named Hardware ID's. Post the top string of characters you see in the window that start with PCI\VEN. After you install the drivers I suggested you should have most of the devices installed. You can find the hardware ID for any remaining devices needing drivers using the above approach and I will post the links to those too. Unknown devices first line will not start with PCI\VEN.  But post the top line for any of those too.

10 more replies
Answer Match 51.66%

Hello ,  When i install the driver i do not get sucess at the end of the installation, it just pops up and i agree to terms and conidtions and nothing happens after that.
 
Any idea please friends?

More replies
Answer Match 51.66%

Hi,

I am looking for Win 95 Sound drivers for this laptop. Can anyone help?

Thanks
 

More replies
Answer Match 51.66%

I've noticed that HP is now basically an all Vista company, so I was wondering if anyone knew of any community made or cracked XP drivers that are compatible with a6200t HP Pavillion desktop. Any help at all is much appreciated.

A:XP Drivers for newer HP model

are you looking for all the drivers? or just for a specific piece of hardware on that laptop

8 more replies
Answer Match 51.66%

I HAVE INSTALLED WINDOWS XP PROFESSIONAL SERVICE PACK 2 AND I HAVE LOST AUDIO,VIDEO DRIVERS.CAN ANY ONE ASSIST ME A GOOD MATCH FOR MY PC? MODEL NUMBER M981G 5.0A? THANK YOU IN ADVANCE.

A:DRIVERS FOR MY PC,MODEL-M981G

Hi .The data you provided is for a motherboard, the drivers are at http://www.pcchips.com.tw/PCCWebSite/Downl...D=6&LanID=2.If that system was put together by Dell, Gateway, etc...then you should go to the respective website for the system manufacturer...and use the drivers they make available there, instead of the ones at the PC Chips website.Louis

2 more replies
Answer Match 51.66%

i need bootable media for used computer with all drivers wiped out
 

A:drivers for model E153

A bootdisk? If you have a windows 98 cd or newer o/s then the cd is bootable. Just make sure that in the bios the boot order is CD-ROM, Floppy, HDD. You can also make a bootdisk on any computer - just go to control panel - add/remove programs.

To get drivers once windows is installed go to the computer manufacturers wesite since it appears to be a name brand.
 

1 more replies
Answer Match 51.24%

Hi,

Application event viewer notification keep showing this error. Kindly advise.

Event ID: 1030
Source : Userenv
User NT Authority\System
Decription: Windows cannot query for the list of group policy object. Check the event log for possible messages previously logged by the policy engine tha tdescribes the reason fo this

Event ID: 1030
Source : Userenv
User NT Authority\System
Description: Windows cannot access the file gpt.ini for GPO CN=(31B2F340-016D-11D2-945f-00c04FB84F9,CN=Policies,CN=System,DC=mscmsia,DC=com. hte file must be present at the location <\\mscmsia.com\sysvol\mscmsia.com\Policies\{31BF340-016D2-945F-00C04FB984F9}\gpt.ini>.(Access is denied). Grpoup Policy processing aborted.


Thank you.
 

More replies
Answer Match 50.82%

Hi guys,

I just formatted my PC and installed Windows 8.1 Pro 64-bit but I can't seem to install any drivers, other than the graphics ones. Whenever I try it says "Your computer does not meet the minimum requirements for installing this software". I've tried chipset, LAN and USB 3.0 which all have the same result.

I went onto the Asus website and tried downloading from this page here:
ASUSTeK Computer Inc. -Support- Drivers and Download P8Z68-V

Am I doing something dumb here? I have no idea what's going wrong...

Thanks for any help

A:Can't download drivers with new Windows 8.1 installation

just for clarification - did you build the computer or is it from a major manufacture (oem)r? If oem, exactly what model?

16 more replies
Answer Match 50.82%

Hi, The Windows 10 64 bit drivers seem to be very old for my lap top, where are the lates drivers?  http://support.hp.com/fi-fi/drivers/selfservice/HP-ENVY-15-j100-Notebook-PC-series/5401187/model/683...

More replies
Answer Match 50.82%

The Intel P61/H61 Utility DVD containing chipsets/Serial-ATA/Network/Audio Drivers and bios doesnt run with windows 8. So should I download them from motherboard page? Should I download the lates bios too if so ?
This is my motherboard GIGABYTE - Motherboard - Socket 1155 - GA-P61-S3 (rev. 2.0)

A:[Drivers for windows 8] should I download them from Mother

Personally, if the motherboard manufacturer supplies Windows 8 drivers, I would use those FIRST before looking for anything else.

Their drivers are more likely to work with their motherboard then other, more generic, drivers.

4 more replies
Answer Match 50.82%

Hi, after upgrading CPU, graphic cards and memeory card, Win7 was installed on E521. Now where can I download drivers for Win7?

Thanks,

A:Dimension 521: where to download drivers for Windows 7

You are on your own since win 7 is not supported on that old model. Go to the hardware manufacturers for drivers.

2 more replies
Answer Match 50.82%

i've tried all of my browser but none of them actually worked... i always got this (We were unable to retrieve the list of drivers for your product.  Please select the desired operating system and select ?Update? to try again.) can i get another link to download the drivers?hp 14-ac156tu  

A:Can't download hp 14-ac156tu drivers windows 10 64 bit

@andritnw? Your drivers here. http://support.hp.com/id-en/drivers/selfservice/HP-14-Notebook-PC-series/8499318/model/8960052 Download and install Chipset Drivers first. REO

4 more replies
Answer Match 50.82%

I'm planning to perform a clean install of Windows 8 Pro on my Asus K53SV laptop but asus doesnt not support my laptop for windows 8 so there are no windows 8 drivers to download.

I've searched around google/forums and found that windows 7 drivers could work, but I was wondering if I would be able to use drivers from the same series but a different model for the windows 8 drivers that aren't found with windows updates? Such as graphic card drivers or ATK.
Also, how reliable is the windows 8 update for finding drivers for my laptop?

Thank you.

A:Using other model drivers for asus K53Sv

You will be fine dude, even if Asus isnt showing your lappy as supported by 8, drivers are available and all works well. I am using two Asus unit wihtout issue. Windows 8 itself will load all that you need almost except for like synaptics, jmicron maybe another...all easy to find

1 more replies
Answer Match 50.82%

PC camera with Mic, Model# VW903
Here is the link to the product: http://www.vetac.com/product_show.asp?id=142

Looking for drivers for XP pro.

Thanks in advance for all the help.

Cheers
 

A:Looking for drivers for PC camera with Mic model VW903

6 more replies
Answer Match 50.82%

So i am buying a brand new hard drive for my laptop and i am going to reinstall windows 8.1 but i have been told that i need to reinstall the acer drivers for my model. I have downloaded the drivers now what do i do? do i just run them on the computer like a program setup when it the computer has windows installed and is working? Thanks in advance! 

More replies
Answer Match 50.82%

Is Windows 7 . . .
- x86 (32-bit) or x64 ?
x64

- the original installed OS on the system?
Full retail version

- What is the age of system (hardware)?
Less than 6 months old

- What is the age of OS installation (have you re-installed the OS?)
Less than 6 months old

The system health report kept timing out so I did not include it. If there is anything else I need to add, please let me know. Appreciate the help guys, thank you.

A:BSOD running a model

Welcome to Seven Forums trieodn. First, I see you are overclocking. Please stop to check for stability. If you are using ASUS AI Suite for overclocking, STOP. Overclocking should be done via the BIOS and incorrect settings inside the OS via software can cause instability and hardware failure. Both of your Bug Check Codes are indicative of a bad overclock.

Also, you may correct me if I am wrong, but I don't see any AV software installed. Please install Microsoft Security Essentials and do a full system scan. In addition to MSE, please install Malwarebytes, the free version, and run a full scan on all user accounts.

3 more replies
Answer Match 50.4%

Hi!

I downgraded the Windows OS from Vista to XP for my friend since the Vista was too hard for him to figure out. However, after downgrading the
OS, I also 'lost' the sound drivers. I tried to download the Realtek AC'97
sound drivers, but got the message that Realtek's drivers were not compliant with Microsoft's 'vendor' policies, so I wasn't able to complete
the download. Anyway, now I need to download another sound driver that is compliant with Microsoft's vendor policies. Does anyone know of such drivers? I'm meeting my friend again on Thursday of this week, and I'd like to have the computer working for him by then. Thanks!
 

A:How do I download compatible sound drivers for Windows XP?

9 more replies
Answer Match 50.4%

Please, someone provide me with the link to download audio drivers compatible with my pc. I'm giving my pc information which i have



------------------
System Information
------------------
Time of this report: 10/23/2011, 20:02:15
Machine name: NITI1-PC
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_gdr.110622-1503)
Language: English (Regional Setting: English)
System Manufacturer: LENOVO
System Model: 8985A62
BIOS: IBM BIOS Ver 2OKT40.0
Processor: Intel(R) Pentium(R) D CPU 2.80GHz (2 CPUs), ~2.8GHz
Memory: 2048MB RAM
Available OS Memory: 2038MB RAM
Page File: 1265MB used, 2810MB available
Windows Dir: E:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode





-------------
Sound Devices
-------------
Description: Speakers (2- High Definition Audio Device)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: HDAUDIO\FUNC_01&VEN_11D4&DEV_1986&SUBSYS_17AA1015&REV_1005
Manufacturer ID: 1
Product ID: 65535
Type: WDM
Driver Name: HdAudio.sys
Driver Version: 6.01.7600.16385 (English)
Driver Attributes: Final Retail
W... Read more

A:Audio drivers download link for windows 7

Have you tried the one from Lenovo?

ADI SoundMAX High Definition audio driver for Windows 7 (32-bit and 64-bit) - ThinkCentre A53, A55, A60, A61e, M55e / Value Line J200, J200p, J205, S200, S200p, S205

2 more replies
Answer Match 50.4%

I remember in Vista almost everyone said not to download drivers from Microsoft Update. But is it now safe in Windows 7? I think it is because I had downloaded a driver from HP and it caused problems. I downloaded a driver from the manufacturer website. It still caused problems. I tried it through Microsoft Update seeing as I had nothing else to lose and no problems. Is it just me or everyone else? I will add a poll to see results.

A:Is it safe to download drivers from Windows Update?

For me, I got problems with them. I always consider that the best drivers are those downloaded directly from the manufacturer's website.

So, my answer is "No."

9 more replies
Answer Match 50.4%

I just bought an HP Pavilion PI6-2316S with an Epson Printer XP 400. I can't download any drivers to get the printer to work. Each time I download, they either stop or won't let me save. I can't use Team 8 remote either. I've never been so frustrated with a system before.
Please render help on how to launch Team 8, and how to download drivers. Thank You.

More replies
Answer Match 50.4%

I am doing a project for a corporation that has disabled Windows Update on all of their computers. I need to install a wide range of printers on these systems, but allot of these drivers are only available on Windows Update for these Windows 7 systems, which is making it extremely difficult for me to install these printers.

Is there someplace where I can download all Windows Update printer drivers, or a way to download and extract them myself?

A:Is there a way to download and extract Windows Update drivers?

Kompressor, welcome to the Seven Forums.

If you haven't been there yet, go here,

Microsoft Update Catalog

and search for the printers/devices, and if available you can then download them.

4 more replies
Answer Match 50.4%

Say I plug a USB in and I'm not connected to the internet can it download drivers for it?

A:Can Windows download drivers when not connected to the internet

  
Quote: Originally Posted by vidya


Say I plug a USB in and I'm not connected to the internet can it download drivers for it?


No, it can't you will have to download drivers on an other PC with an internet connection

4 more replies
Answer Match 50.4%

Please I need a link to download drivers for Oki c5650 and also how can I reset the language from German to English
Thanks

A:How do i get a link to download drivers of OKI C5650 OS Windows 7

Here you go the Link below for the Drivers ....
C5650 | Downloads | OKI UK | Printers & Managed Print Services

1 more replies
Answer Match 50.4%

Hi, I have used a Mac most of my life and just got a new laptop today with Windows 8 on it and I am struggling, ANYWAY, I just plugged in the USB cable from my printer to the laptop and pressed print on a word document and it prints but im pretty sure its using coloured ink to print out the black and its taking forever just to print one page, the thing is the printer setting/options seem to be lacking, there is no option to choose black and white or reduce the quality etc, i didn't have to download drivers because it just picked the printer up, however, i tried to download the drivers to to see if that would fix the problem but it won't let me, when i got into the control panel to the printer i tried to click on download drivers but i get an error window pop up called RunDLL with a message saying There was a problem starting C:\windows\system32\spool\drivers\x64\3\ep0nb0lb.dll The specified module could not be found.

Then when i try to click on 'support' again i get an error message saying the link is incorrect.

When i went to the epson website and downloaded the drivers, it downloaded them but when i clicked on them it wouldn't let me open them, another error message...

I dont know my way around these windows computers so its probably something everyone knows except me : )

Helppppppp..very frustrating...thanks : )

A:new to windows from mac - wont download printer drivers

Have you tried going directly to the manufacturer's website and searching for the driver for your model of printer?

5 more replies
Answer Match 50.4%

 i need the download links for HP G62-a11SE Notebook PC  Model #: WZ679EA drivers. thanks

More replies
Answer Match 50.4%

Hi,

As the title says.. I just installed Windows 7 Pro on my new SSD :D


But when I go to HP's website for drivers (dv7t-6c00 CTO QUAD).. And they don't have a download for Realtek wireless.... I know I have a Realtek WLAN card because I looked up the Hardware ID(PCI\VEN_10EC&DEV_8176&SUBSYS_1629103C&REV_01)


Anyone know what I can do?
Thanks!

A:[SOLVED] Realtek WLAN drivers.. Not sure what model I have

Quote:




0x8176
Chip Number: RTL8188CUS
Chip Description: Subsys_818410EC
Notes: Realtek < should be the download page




PCI Vendor and Device Lists

(by following the manual method in the TSF Article: Tracking down Device Drivers | Tech Support Forum)

8 more replies
Answer Match 50.4%

I can't able to access my WiFi as my drivers r not working please do the needful...thank you

A:i need wifi drivers for my amd processor ,model no:15-af001A...

Your Support page has drivers posted:http://support.hp.com/us-en/drivers/selfservice/hp-15-af000-notebook-pc-series/7771410/model/8189657...

1 more replies
Answer Match 50.4%

WOW...impossible to find the audio/lan drivers for this laptop...went to the gateway website...cannot find this model anywhere on there. Any site have these...goodle search, just gets the usal slam for downloading the drivers finder program..not a lot of help anywhere..I got no sound or interent on this laptop. Thanks for anyhelp...
 

A:GATEWAY LAPTOP MODEL W340UI Drivers

11 more replies
Answer Match 50.4%

I have a hp laserjet 1100 printer, model C4224A, which I  would like to  use with the Windows 7 operating system, but do not want to  buy Windows  7 until I  know that there are printer drivers that will let it work in the Windows  7. I have not been able to find any information on the hp website.  Can someone steer me in the  right  direction? Thanks! dino











Solved!
View Solution.

A:Drivers Laserjet 1100 Model C4224A

Dino. Good to go with Win 7  32bit or 64bit. http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome?sp4ts.oid=14925&ac.admitted=1406146394967.876444892.199480143 REO

3 more replies
Answer Match 49.98%

these are the most suitable drivers i've found without causing boot/display issues in windows 10 x32 build 1607 : https://1drv.ms/u/s!AljHtQYoT8WAg41HP_YPSDrF_65Hlg unrar and install using right-click 'update software' of corresponding hardware in device manager or run each folder's setup. If an indication of 64bit driver appears (!) in device manager, just uninstall/delete driver & reboot for ms default (ie Realtek).

More replies
Answer Match 49.98%

After downgrading my Os from windows 8 to windows 7. I also noticed that my system can't detect WIFI or dsl or any form of internet connection.. I want to upgrade my drivers and utilities in windows 7 but the problem is,, i cannot connect to internet.. is there anyone who can share a downloaded drivers and utilities for windows 7.. I am really having a hard time with this..

Specs:

ASUS S550C Series
CPU:Intel Core- I5- 3317U, 1.7 GHz
ODD: DVD Sup. MTI
Memory: 4 GB
HDD: 500 GB

A:Where to download drivers and utility for windows 7 Asus s550cm

You will have to take a look at the device manager and get the drivers off the manufacture . Asus doesn't have drivers for the laptop on windows 7

3 more replies
Answer Match 49.98%

these are the most suitable drivers i've found without causing boot/display issues in windows 10 x32 build 1607 : https://1drv.ms/u/s!AljHtQYoT8WAg41HP_YPSDrF_65Hlg unrar and install using right-click 'update software' of corresponding hardware in device manager or run each folder's setup. If an indication of 64bit driver appears (!) in device manager, just uninstall/delete driver & reboot for ms default (ie Realtek).

More replies
Answer Match 49.98%

Hello, I plan to buy a used genuine copy of Windows 7 with the product key.

I thing is, I read this article about how I won't be able to go online with my modem after a new install:

The myth of driver backups | PCWorld
Basically when I do a fresh install of Windows 7, I will not be able to connect online to update my drivers for my ethernet & display & Windows will not recognize the drivers from a USB stick without an installer either!?

I will have to manually download them from the manufacturers site, but my PC is used & had a lot of off shelf upgrades, it isn't a HP/Dell/Acer PC to just get the driver installer from their website.

How would I know what to download & where?

A:Windows 7 won't go online & won't download drivers after clean install

Yes, just download the drivers installer before reformatting and you'll be able to install those.

This tutorial helps in determining your exact hardware: Speccy - Advanced System Information Tool

Look at the model of the network card, motherboard, chipset, video card, wifi adapter, or any other thing you might have. Then with the manufacturers/models, just google those and download them from each individual website.

The HP/Dell/Ace/whatever brand is just a commercial name. They only take ready parts from the hardware manufacturers, assemble it, infect with crapware and relabel it before selling, but that's all. The drivers themselves will never come from them, directly.

9 more replies
Answer Match 49.98%

Hey guys,

Operating System: Windows XP SP3
HP Pavilion, DV2700 (2000 model)

p/n: kq654av
s/n: 2ce82245nf

I am missing 3 drivers:

Ethernet Controller:
PCI\VEN_11AB&DEV_4353&SUBSYS_30CD103C&REV_14\4&29E2C51B&0&00E1

Modem Device on high definition audio bus
HDAUDIO\FUNC_02&VEN_14F1&DEV_5051&SUBSYS_103C30CD&REV_1000\4&125A1DFE&0&0002
SM Bus Controller
PCI\VEN_8086&DEV_283E&SUBSYS_30CD103C&REV_03\3&B1BFB68&0&FB
The numbers below the 3 drivers are the driver instance IDs. not sure if those help.

thanks,

geoff
 

A:XP Drivers - Missing 3 - HP Pavilion dv2700 (2000 model)

The drivers in question are on your mother board disc, this is assuming you have on board ethernet
 

2 more replies
Answer Match 49.98%

Hi,

Need drivers for HP Pavilion desktop HPE Model h8-1114 for internet access.

HP Pavilion HPE series desktop
Model h8-1114 2.00
Board PEGATRON CORPORATION 2AC2 2.00

Windows 7 Home Premium 64bit SP1

Network adapters
Bluetooth Device (Personal Area Network)
Bluetooth Device (RFCOMM Protocol TDI)

Other devices [with yellow exclamation marks]
Ethernet Controller
Network Controller
PCI Simple Communications Controller
SM Bus Controller

Tried Driver sp54416.exe does not install, get 259 error code

Should I be using Bluetooth and how? Please advise.

Thanks,
Joe

More replies
Answer Match 49.98%

Having a small problem trying to install a wireless network, have 1 problem PC that wont take the driver install, The tech guys told me that the motherboard drivers need to be replaced and then to retry. The pc is custom made, and I cannot seem to find a Bios screen that list the hardware, So is their anyway thru windows to find out what motherboard I have??

thanks for any info you can offer.
 

A:Having trouble,I need to find what motherboard make/model is for drivers

download and run Everest Home
 

1 more replies
Answer Match 49.98%

hi all i am facing problem during installation of drivers for Samsung galaxy S2 Model SGH-T989D.it gives the error that MTP Failed and it wont connect to the laptop while useing software KIES Samsung. please help me out

A:MTP USB Drivers for samsung galaxy s2 model SGH-T989D not installed

I don't care for the nature of the Kies software, although it did seem to work for my Galaxy S4 to make it visible to my desktop PC.

But I didn't bother installing it on my laptop. Instead I used PdaNet+ for Android. Works perfectly, and allows the phone to be handled very simply by Windows Explorer (rather than something like intrusive Kies software).

Also, PdaNet+ and FoxFi allows my S4 and laptop to run in "USB tethered mode" without having to pay Sprint monthly for WiFi capability.

1 more replies
Answer Match 49.98%

I reinstalled windows with the recovery disk that came with the gateway laptop. Then I could not get on the internet. Device manager displays three yellow quotation marks. standard vga graphics adapter. video controller, and unknown device. I checked into the unknown device and it was usb\vid-0bda&pid-8189.
How can I find and load the drivers without internet on this computer?
 

More replies
Answer Match 49.98%

Having recently purchased a second hand HP Compaq 6200 Microtower (64 bit) with W7 Professional, I connected up my PC Line Scanner, tried to install it, only to get 'No Drivers have been found' Googling further I discovered that this is a clone of a Musteq Scanner, but when I followed a link from their website, it was flagged up as 'unsafe', so i didn't proceed any further. Does anyone know of a safe, reliable source from which to download drivers for the above scanner, please?

(Mods. If this is in the wrong section, please move it to a more appropriate one.)

A:Finding Drivers for PC Line Scanner model PCL-3000

Hi try the ftp site from the link here. Toward the bottom of page.
Code Snippets and General Help: Windows 7 Drivers for PC line Flatbed Scanner (Model PCL-3000 aka Mustek 1248UB)

1 more replies
Answer Match 49.56%

Had an AMD HP G62-227CL laptop that overheated and required motherboard replacement with similar Intel motherboard. Old board clocked at 2.2 MHZ .. new one is 2.0 MHZ.
Board I got from Ebay works but now computer believes that it is a Compaq CQ42 Laptop. Do not know the model number, which I would need on HPs site to download BIOs upgrades.

Is there a way to tell which bios I need or what model I now have?

Thank you,

Steve
 

A:Replaced Failed Motherboard.. now how do I determine model number and which BIOS to download?

Finding a bios update rather then the one hp would give for this board. Would be next to none.
You could check a few of the support pages for this model. Which their are a lot Of
Maybe find out the motherboard you have bought.

HP Support, Drivers, Contact and Help Forums | HP ® Support
 

2 more replies
Answer Match 49.56%

Hello, The laptop connects to a website and then won't complete the download. The hour glass stays visable for many minutes or until the system times out. Everything ran fine until about 2 weeks ago. Another laptop using the same router runs OK. I completely reformatted the hard drive and installed a fresh upload of Windows. The problem was unchanged. I turned off the popup blocker. No improvement. Sometimes after the website is reached a message appears that the site is unavailaable. Could there be a problem with a storage area used to receive the website data no longer being available to receive all of the data required.

Thank in advance for your help
Dennis

A:Laptop running Windows won't download websites.

Lets see if we can get this train on the right track.
1. You are on a Windows 7 Forum and you specs indicated XP.
2. If you are using Windows 7 filling out your My System Specs completely helps us help you. This little program will help you do that.
Speccy - System Information - Free Download

If your not using Windows 7 you should be. We can give you guidance there.

3 more replies
Answer Match 49.14%

I hope this is the right forum for this kind of question, first time on one of these sites.

I downloaded Starcraft 2 last night and went to bed, then got up this morning to install it. When I double clicked on the install file, nothing happened. I waited and did it again. I rebooted my computer and tried again, nothing. When opening my task manager, I have an installer.exe running, but it seems to freeze as soon as I start the file and does absolutely nothing.

So I went to Blizzard's tech support and found the corresponding topic, they told me to make sure all my drivers were up to date. I went to Dell's tech support and found the right drivers, then downloaded them. However, I cannot install them because when I start the install, nothing happens. Again, I get an exe file in my task manager but all it does is appear then sit there.

Has anyone else seen this sort of behavior? If so, how can I go about fixing it?
 

A:Cannot download/install drivers/programs, Windows XP, Inspiron 530s

If you haven't already do a complete uninstall of Starcraft 2. Can you now do your Dell updates?

Also, when you tried installing the first time did you disable your firewall/antivirus? I found if I don't disable my Online Armor (great firewall by the way) I'll have loading/installing issues. Once I install a game and then renable my firewall then things are fine.
 

1 more replies
Answer Match 49.14%

"Windows 7 Driver Download
Windows 7 Drivers Latest Download. Microsoft Certified. (Recommended)www.Windows-7.DriverUpdate.net "
 
So there are links to this site everywhere. I am skeptical. Has anyone gone there, used them? Why? Does it end up as a subscription service to solve the problems created?
 
I have a 5 year old Xerox all-in-one that is not compatible with Win7. Seems like Xerox cannot support it, or won't support it. I just don't want to create a new set of problems.
 
Thanks for any suggestions.

A:Everywhere I see links to: Windows 7 Drivers Latest Download. Microsoft Certifie

Drivers should...be obtained from:
 
  a.  System manufacturer's website, if laptop or other OEM system (HP, Dell, Lenovo, etc.)
 
  b.  Motherboard CD or component manufacturer's website, if system is self-built.
 
  c.  The CD which came with the system/component (reflects known working drivers).
 
The drivers available via Windows Update...should generally NOT be used unless you are totally desperate and cannot find them anywhere else or any other way, IMO.
 
Louis

2 more replies
Answer Match 49.14%

Hi all,

I use Linux and CUPS to provide free and stable networking printing shares for our community centre. Its easy to connection windows xp clients to the linux printer server, windows 7 is a pain, I have a work around, but would like to make it more streamlined.

I can get some older printers that do not have official windows 7 drivers working by using windows update during the driver selection phase of the printer set-up procedure. And selecting a slightly different printer from the list of available windows update drivers.

While this method works, there is a delay of between 5-10 minutes after clicking the windows update button before the list of drivers appears.

I would like to know if its possible to do any of the following 2 ideas:

1. manually access these driver files on Microsoft website somewhere, and download them for latter use.

2. Find where windows 7 saves the downloaded driver files and package them some how so they can be re-distributed.

As always your comments/suggestions are very welcome.

A:Manually browse and download Microsoft Drivers from windows update.

  
Quote: Originally Posted by Remush


Hi all,

I use Linux and CUPS to provide free and stable networking printing shares for our community centre. Its easy to connection windows xp clients to the linux printer server, windows 7 is a pain, I have a work around, but would like to make it more streamlined.

I can get some older printers that do not have official windows 7 drivers working by using windows update during the driver selection phase of the printer set-up procedure. And selecting a slightly different printer from the list of available windows update drivers.

While this method works, there is a delay of between 5-10 minutes after clicking the windows update button before the list of drivers appears.

I would like to know if its possible to do any of the following 2 ideas:

1. manually access these driver files on Microsoft website somewhere, and download them for latter use.

2. Find where windows 7 saves the downloaded driver files and package them some how so they can be re-distributed.

As always your comments/suggestions are very welcome.


I don't think there is a way to do that I would recommend that you set up a domain and be the system administrator for all fo the Windows 7 pcs, so you can install all of the updates on all of the computers at the same time.

2 more replies
Answer Match 49.14%

Hi All

Model shows up like that in all software programs, unknown motherboard inside here, using Standard Sata AHCI controller right now, planning on clean Windows 10 Pro Install when I get the money to purchase Windows 10 Home to Pro upgrade, but I thought i'd start gathering drivers now, and save them til I'm ready to do the clean install.

Do I use the Chipset Drivers from AMD's Site?

or Asus site?

And will it interfere with sleep mode if I do install the chipset drivers with the clean install? right now it sleeps perfectly

More replies
Answer Match 49.14%

Hi,
windows XP starting. after login with password it crashes immidiately with the following error:
0x000000C2 (0x00000043, 0xD76A2000,0,0)

trying using ERD - but it does not find the windows XP system - does notrecognizes the hard disk - may need special driver, during boot using F6.
but what is the driver, and how can I find it???

*can not find any hd driver.*
*can not find my specific laptop model*

my laptop model is NOT listed in toshiba support database, NOR in registering my laptop:
Sattelite Pro A200 - EZ2205X system unit
model no. PSAF4U-00L004

also entering serial no. results as invalid. ???
please HELP !!!

Message was edited by: zhelp

A:BSOD error 0x000000C2 after login XP SP2 - cannot locate model drivers

Your notebook is definitely listed but you have probably searched on the wrong page. Your model is US model so please search for drivers on http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp

Do you want to make fresh WXP installation? What you need is SATA driver and it must be loaded before WXO installation starts. This driver must be load with F6.
I don?t know which chipset has your notebook model but please check THIS page to see how to find it.

1 more replies
Answer Match 49.14%

Hi, I have a hp mini 110-3100, but when I go to hp website downloading required drivers for it they ask about its CTO, EM, ET, LA, XX...how can I find which onr fo these is my comp. And i m havin some problems with wifi the wifi light is turned red installed some drivers got them from hp website but still the wifi is not working Please let me know if u have any solutions
 

A:How I can find exact model of my laptop to instal correct drivers.

try this
Model:

* Go to Start > All Programs > Accessories > Command Prompt
* Type, wmic computersystem get model
* Press Enter

should give you the model
OR
have a read here
http://h10025.www1.hp.com/ewfrf/wc/...indModel&cc=ca&dlc=en&docname=c00033108&lc=en

can we see an xirrus screen shot
------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
Direct link to the program is here http://info.xirrus.com/Wi-FiInspectorConfirmation.html

{If the above link does not work heres another link http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html}

Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You need will need to have NET Framework installed for the WiFi Inspector to function.
On windows 8 - (i do not have windows 8) but, it would appear tha... Read more

2 more replies
Answer Match 49.14%

Dell Box has no Sound. I try to update using Web & get response need Disk. I have no disk. Can this be done over the wire or do I need new CD or Diskette to re-Activate the Machine's Sound Card? Machine is not that old. About 2000 Year Model I think Inspiron but not sure. Any ideas on how to make this Sound Card work. I do have the obligatory Yellow Exclamation Point in Systems under Control Panel.
Thanks for any help.
Bill S.
26 July 2003
0906H DST
In NYS
 

A:Drivers For CrystalFusion Sound Card for Dell Box PC Desk Model

Have you tried to download from dell, after registering you should just be able to enter the model number and find and download the driver
https://support.dell.com/register.aspx
 

2 more replies
Answer Match 48.72%

I'm using Chrome on a Windows 8.1 computer and for the last few days, new tabs keep opening when I try to click links randomly. Sometimes it does, sometimes it doesn't. Malwarebytes finds nothing. Adwcleaner only detects Chrome preferences. JRT detects a "Bad Module" that I need to reboot to get rid of, but logs show nothing at all. Rkill did nothing to change these results. Malwarebytes anti-rootkit found nothing. TDSSkiller found nothing.
 
I tested in IE as well, and the same thing occurs.
 
There are no suspicious processes, programs or extensions visible to me. 

A:Tabs telling me to download random things (Windows NT Drivers, flash, etc.)

Oh, the most concerning pop-up is one telling me to download "Lightspark Player Pro", which automatically downloads a .exe file called "Player-chrome.exe"

22 more replies
Answer Match 48.72%

Hello, can anyone direct me to all drivers for this laptop please? I looked at one page here but it is only showing a "Touchpad" driver?
 
http://us.acer.com/ac/en/US/content/drivers

A:Need win7 drivers for Acer Apsire 7560 Series Model P7YE5?

Hello there,
 
You can have Windows automatically download recommended drivers for your device through "Windows Update". Follow these simple steps: http://windows.microsoft.com/en-gb/windows/update-driver-hardware-isnt-working-properly#update-driver-hardware-isnt-working-properly=windows-7
 
Hope this helps! 

11 more replies
Answer Match 48.72%

Hi, I have a Acer 5315 series model ICL50 notebook running
windows vista basic. I didn't get the origonal Vista Cd with it for re installation if needed. Anyways I installed XP and now I am back to Vista. But I dont have the drivers. Specially my keyboard is not functioning with all its keys. Can anyone help me out with it.

A:Keyboard drivers for vista Acer 5315 series model ICL50

Try looking here;
Acer Europe - Service & Support, Drivers & Utilities, Downloads

4 more replies
Answer Match 48.72%

I am having a dell latitude E5400 which had windows XP preinstalled on it,a few days ago I upgraded to wwindows 10, and there are no drivers available for it,please provide me the wlan and bluethooth drivers.

More replies
Answer Match 48.72%

I recently had to reinstall Windows XP Professional with Service Pack 2. I downloaded the relevant drivers from the Fujitsu-Siemens website and most of the computer is up and running again. However, the sound card won't work. The "PCI" is showing it has a problem but I can't match any drivers to it and the audio has various things installed but none are running the sound. The relevant Realtek drivers won't run.

I used to have Realtek and all worked fine before the reload of windows....

Fujitsu have no idea (which is promising)!

HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I've just trawled through everyone else's answers and have tried the one copying from c:\windows\inf but have no "ExcludeFromSelect" on my 20th line and at the end have to choose a program to find the plug and play info and it then won't load....

Am going to reinstall chipset drivers - any other ideas?

Have reinstalled the chipset drivers - makes no difference. Tried the solution that has worked for other people but as I mentioned, I don't have the line "Exclude from" etc in c:\windows\inf.....

Am at the end of my tether - please help!!!!!!!!

Have tried uninstalling sound drivers and reinstalling and it just deletes and reinstalls the connexant ones, not the realtek.

Solved - called the Nerd Squad - they were fantastic and sorted the problem really quickly - thanks guys!
 

More replies
Answer Match 48.72%

I recently went through a large upgrade and am currently experiencing some random reboots. after reboot Windows gives me a message similar to: "Windows XP recovered from a severe error" and goes onto explain that it is a driver conflict.

This is my machine, things in green are new:
ABit VT7 - is the via PT880 chipset
pentium 4 HT 512 cache
3GB ram - 2x1GB sticks, 2x512MB - sticks are same speed 3200 but by different manufacturers.
2 IDE hardrives
2 SATA 150 hardrives - setup in raid 0
before the green stuff I had no difficulties.
NVIDA graphics card
2 or 3 other pci cards

After connecting my SATA drives on boot-up my machine dispalys a message saying "hit TAB to configure RAID" it's much earlier than the XP initialization.

So using this very basic configurator I setup the raid 0. And on entering XP everything appeared to work fine. I could format/partition/mount my drives with no problem.

Heres where things got strange. I decided the right thing to do was to upgrade my drivers so I downloaded the newest SATA RAID drivers for my chipset:
http://www.viaarena.com/default.aspx?PageID=420&OSID=1&CatID=1180&SubCatID=143

This is when i started experiencing the random reboots. So I unistalled the VIA software. I can't be 100% sure my machine is currently stable only that I haven't had a random reboot in the 3 days since.

Whats very bizar is I still get windows messages saying "new hardware found SATA RAID" and prompts ... Read more

A:VIA PT880 - running raid without windows drivers?

The RAID configuration program lives in the RAID controller ROM. Think of it as an extension to the system BIOS if you like.

Instead of uninstalling the new RAID drives, you should have went back to the old ones using system restore..

Try reinstalling your original RAID drivers (from the CD).
 

2 more replies
Answer Match 48.72%

I will be forever grateful to anyone who can help me with this problem! HELP!! I'm trying to download using a mini firewire cable from the camera to the laptop. When I follow the directions according to the JVC manual, the camera isn't recognized at all. I had my assistant try to do the same using his MACBook today and he wasn't able to get any results either. Is there any special driver for the firewire port (mini-firewire s400 port) that I can get? Or a special driver for the camera? I've done loads of research online and seems like there are lots of people looking for the same answer, but no-one seems to have that answer. Thanks!!
 

More replies
Answer Match 48.3%

Please I need drivers for a notebook HP Pavilion dv4170US running Windows 7 Professional Edition 32 bit, specially:

Mass Storage Controller.
Video Controller.

My notebook was running Windows XP Home Edition Service Pack 2 before.

A:Help with Drivers for Hp Pavilion dv4170US running Windows 7 Professio

Hi welcome to the forum. If hp don't have the drivers you might be out of luck. Post the hardware id's someone might be able to find a driver that might work.

5 more replies
Answer Match 48.3%

First off System Specs:

Asus G60VX Series Notebook
Windows Vista 64-Bit Home Premium (Yes, im sure it is 64 bit)
Nvidia GeForceGTX 260M CUDA 1GB
4GB RAM
RealTek HD Audio

IF you need to any other specs just ask.

PROBLEM:

Basically I bought this computer for gaming and several games Ive bought recently wont run so I figured I would update the graphics driver just to be safe and then go from there. I download the installer for the latest nvidia driver just fine, and when I go to install it says Im not running Vista 64-Bit when I clearly am and closes. And when i try the 32bit installer it says it cant find compatible hardware for the drivers, an also untrue statement.

Help please?
 

A:Trying to update video drivers and the installer says im not running 64 bit windows?

what is the manufacturer of your graphics card? XFX ,EVGA?
 

10 more replies
Answer Match 48.3%

I need to updated the drivers the chipset, display, IPMI Interface, base system device, and the NIC drivers.  Do you all know where I can find these at?  My chipset is an Intel L5520/X58 chipset?  The IPMI and base system device drivers seem not to exist. Rufus

A:Drivers for an HP ProLiant DL380 G6 running Windows Server 2...

We dont support enterprise products here but I found what you need. http://h20566.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=3884088&swLangOid=8&swEnvOid=4168

2 more replies
Answer Match 47.88%

Hi

I am trying to reinstall PS_AIO_04_C4500_USW_Full_Win_WW_130_140.exe (HP full feature software and driver) and I'm persistantly getting the message below
(I've attached the event viewer log too)


I have closed down anti-virus / anti malware applications so what's happening now? I could throw the printer and laptop into the street right now!

Can someone help please?
Thank you

p.s
Just tried the same on a clean boot, and the download slowly got to 170mb (over 8 mins) and the same message appeared.

A:'Download was interrupted' - Cannot download drivers for HP printer

Tara,

You say it didn't work on a clean boot? Hmm. Then see if firefox or another browser gives you the same issue, if you will.

9 more replies
Answer Match 47.46%

Hi there,

I'm in desperate need of help - my laptop (lenovo G570) will not stay connected to the wifi at work. It'll connect for 5 minutes, then disconnect & not find the wifi network for about 15 minutes. The thing is, my phone & tablet stay connected permanently. This has been happening since I reinstalled Windows. I've tried switching the router off, unplugging it, and leaving it off for a few minutes, but that doesn't help. I've also been to the Lenovo support page to try find the drivers, but I don't know which ones to use.

A:Wifi drivers for lenovo G570 running Windows 7 Starter 32-bit

Hi ... Welcome to Seven Forums ... Have you Installed any Drivers from the Lenovo Website ? ...

Have you ran Windows Updates recently ? ...
How does your Laptop perform when connected by Lan ? ...

7 more replies
Answer Match 47.46%

I need to see a list of all of the drivers that are running or stopped on my computer. I know how to pull up a list in cmd prompt, but that doesn't tell me if the driver is running or if it's stopped.

I called HP for help setting up the fax portion of my new HP wireless printer. The tech remoted in and after trying something with the fax and telling me he was disconnected. Checked a few other things and showed me a window very similar to the one in the picture. It showed about 90% of my system drivers as "stopped". He wanted to run a scan and charge me $99 to fix the problem. I told him to forget it. I called for help setting up my fax, and that everything was working fine yesterday and that I sent a fax on my previous printer yesterday, without a problem. He told me that rebooting my computer wouldn't help. I told him I would try anyway then ended the remote session.

I'm convinced he did something to my computer and was trying to rip me off by charging me money to fix something he did. Yes, I am 100% sure that I was connected with Hewlett Packard. I looked up their toll free number myself and called it. I don't let just anyone remote into my computer.

What I need is a list like the one in the picture, so I can see for myself.

Like I said, I managed to see the list in CMD prompt, but it doesn't say whether the driver is running or stopped.

A:How to access list of running/stopped drivers on my Windows 7 Computer

Hi Linda,
From here
then Software Enviroment >> system drivers

roy

5 more replies
Answer Match 47.46%

I recently bought a Dell Inspiron 531 at a garage sale. It came with a version of Vista that was cluttered up, full of viruses and in general full of problems. I don't like Vista anyway (I generally run Kubuntu or Mint for most of my computing), and I have a generic MS Windows XP sp2 install pack laying around. After installing XP, I loaded my linux OS's as usual, with no problems. The problem is with the XP install. It appears that Dell, in it's wisdom, made the Inspiron 531 specifically for Vista and the standard drivers available on Dell's site don't function well with XP (can't connect with the Web, graphics "roll-over" with the bottom showing at the top of the screen, and generally don't work well with the onboard graphics card 'Nvidia GeForce 6150'). Does anyone know a scource for drivers that will 'work-around' this issue? I know that the order the drivers are installed is important, so I wiped the drive and made a fresh install of Windows with no changes. The system setup is: Dell Inspiron 531 with AMD Athlon 64X2 Dual Core Processor 3800+ running at 2.0 Ghz with 4Gbs memory. I am set up for triple boot on two HDDs running Kubuntu 12.10 and Linux Mint Maya on one 260gb Hd and Windows XP Home edition Sp2 on a 40Gb Hd. I've searched this site and seen mention of a couple of users with XP running on this model, but no mention of the preferred drivers. Dell has been no help, as this is a discontinued model. Thanks ... Read more

A:Drivers Needed for Dell Inspiron 531 running Windows XP new install

Hello and There seems to be drivers available for an Inspiron 531 desktop for XP HERE Just choose the operating system by hitting the down arrow.

12 more replies
Answer Match 45.78%

When I connect my Gateway Laptop to my Toshiba TV through the HDMI ports I get no sound or picture. I changed the input port to the HDMI port on the TV. I think it is in the settings of my computer where I need to make a change but I can't find out where. Help!!

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Home Premium, Service Pack 2, 64 bit
Processor: AMD Turion(tm) X2 Dual-Core Mobile RM-72, AMD64 Family 17 Model 3 Stepping 1
Processor Count: 2
RAM: 2813 Mb
Graphics Card: ATI Radeon HD 3200 Graphics, 256 Mb
Hard Drives: C: Total - 114115 MB, Free - 4090 MB; D: Total - 114116 MB, Free - 111336 MB;
Motherboard: Gateway,
Antivirus: CyberDefender Internet Security, Updated: Yes, On-Demand Scanner: Enabled
 

A:Connecting Gateway Notebook Model MD2614U to my Toshiba 46" TV Model 46XV645U

8 more replies
Answer Match 45.36%

i broke my dell xps 12 model 9Q23 lcd screen and i've been searching high and low for a replacement screen but to no avail. I have however found a replacement lcd screen for dell xps model 9Q33, from a quick google search, they both look similar to one another but with different specs.
So i was wondering if i purchased replacement lcd screen for model 9Q33, would it work on model 9Q23?

thanks.

A:Does dell xps 12 model 9Q33 lcd screen would work with xps 12 model 9Q23?

According to parts-people.com, the LCDs for one don't work with the other despite the similarity in design of the two systems.
There are some places showing screens for the earlier 9Q23 in stock.
www.upperedgetech.com/.../

1 more replies
Answer Match 45.36%

NVIDIA RIVA TNT2 Model 64/Model 64 Pro PROBLEM..

i saw something about this in another thread but can't find it
***
anyway my 32mg card only shows 16mg
the other thread listed a driver that worked for one member and i have the same driver...doesn't seem to work for me
****
is there a dialog or setting...?
thanks
mac
 

A:NVIDIA RIVA TNT2 Model 64/Model 64 Pro ONLY SHOWS 16MG

16 more replies
Answer Match 45.36%

I have a nvidia riva tnt2 model 64/model 64 pro pci bus videocard.
The other day I bought the follow up of MOH (sorry forgot the name because returning it to the store)but ofcource you already see the problem rightaway:error log file of the game told me the card was missing out on some functions.Can this card be updated so "heavy duty games won't be a problem in the future?(il2/fb-wolvenstein-cfs2 run good though!)

Thanx for listening!
 

A:nvidia riva tnt2 model 64/model 64 pro update wanted

Well...you can get the latest drivers for the card, but it won't help that much, because it's a TNT2...and PCI....

If you wanted to play newer games, you'd have to get a new video card....but if you're running a PCI video card right now, then it may not be worth it...check if you have an AGP slot, is should be above the PCI slots on the motherboard, and slightly offset from them...if you have an AGP slot, then that's good, because you could get a good video card...but if you don't, you'll probably be better off getting a whole new system rather than just upgrading the video.
 

1 more replies
Answer Match 44.94%

I have the Nvidia Riva TNT2 Model 64 / Model 64 pro video card and i want to install a game but the video card has to be in 256 color mode and in Windows i can only go to 32 bit what can i do? Any comments or posts would be great! Thank YOU!
 

A:Nvidia Riva TNT2 Model 64 / Model 64 pro Problem?

Just to be clear, 32-bit is actually 16,777,216 colors, so its much more then 256 which is just 256 colors. So for 256 you need to lower the color depth not increase it.
 

1 more replies
Answer Match 44.94%

Greetings,  I was wondering what to look for if I wanted to upgrade my 320-1030  in terms of a motherboard and CPU? I was contemplating upgrading the CPU to an A8-3820 on the existing board, but I now am wondering if it is possible to move to a faster CPU (which I am assuming would require a new motherboard  if that is possible).

More replies
Answer Match 44.94%

Ownership of MP3 U.S. Logic Digital Audio Player (square size model PA36B-21. I have a new Vista operating system. I have lost the CD to install on new pc. I have searched my old harddrive but cannot locate proper file to install to new system. I have searched the net but seems that I cannot locate current info. All info I have found is several years old so I'm not sure if the software is still available. I have not used this audio recorder in a long time and have info from a conference that I would like to save to my system.

Thanks for the help.

Jim
 

More replies
Answer Match 44.52%

Hello, I've been saving up for some time now and I would like to build a good gamin computer. I know I have the right money to build a solid performing one, one that can run games on high quality too. The only problem is, I don't know which parts to buy. I do know how to build it however. I would like some help selecting parts from you. One final point, I will want it for doing other stuff, not demanding just practical uses like searching and making documents etc. Thanks so much!
 

A:New PC Build - £620 ($1030)

You need to provide a little more info;
1 Do you want amd or intel?
2 Do you have any parts you are going to reuse ie case, keyboard/mouse, optical drive, etc?
3 Are you including the cost of windows for your new build?
 

2 more replies
Answer Match 44.52%

One of our users just lost control of her PC. Someone remotely took control of her mouse. The only unusual activity we have seen thus far is Port 1030 called iad1. Has anyone seen this?
 

A:iad1 on TCP 1030

Hi nmorrisonaz,

Not sure If any malware can do that.

But please do this. Click here to download Hijack This. Run Hijackthis.
Click the "Scan" button when the scan is finished the scan button will become "Save Log" click that and save the log.

Go to where you saved the log and click on "Edit > Select All" then click on "Edit > Copy" then Paste the log back here in a reply.

DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required. Someone here will be glad to advise you on what to fix.

*Note: When you download Hijack This Do Not download it to a temp folder or to the desktop. Create a permanent folder somewhere like in My Documents and name it Hijack This and put it in that folder.
 

3 more replies
Answer Match 44.52%

Does anyone know where I can order an usb drive to get my HP Mini 1030NR restored to factory setting? Thnx 

A:Hp Mini 1030 NR

hi. did you ever get the recovery disks? I am in the exact same situation and cannot for the life of me find the recovery image anywhere!

1 more replies
Answer Match 44.52%

On the hp website it stated that the i7 2600 is supported, now that I tried it on boot the screen says unsupported cpu installed and it justs shuts down, I already upgraded the bios any suggestions that I can do to resolve this? thanks in advance

A:520-1030 cpu upgrade

An Intel Core i7 2600(95W TDP) and 2600s (64W TDP) is supposed to be supported. Are you certain that what you installed is not an Intel Core i7 2600k instead?

9 more replies
Answer Match 44.1%

I am constantly having this problem with my laptop. As I plug in and unplug my headphones throughout the day, I've noticed that after a couple times the bass gets really quiet and almost completely drops out. Since I have some pretty decent audiophile headphones with really great bass, it is super annoying and noticeable. 
One workaround I have discovered is to go to the audio settings (either in Windows or the Dell Audio app), and switch the Default Format (the thing with 24-bit, 48000Hz in it)  to something else, play some audio, then switch it back. 
A little word on my setup: I have the latest drivers from the Dell download page installed. I am running Windows 10 64-bit with all the updates. I have Waves Maxx audio "enhancements" disabled. My Default Format is usually set to 24-bit 48000Hz, but the problem eventually happens no matter what I set it to. The "headphone size" option is set to "Medium", but as far as I can tell this option does nothing if I do not have Waves Maxx enabled. Switching it also does not fix the problem.
If I play audio using WASAPI (this basically means that the music player takes over the sound card completely, and bypasses whatever audio processing Windows and the driver has) the problem does not happen. 
How do I fix this problem? It's incredibly annoying, and most likely has something to do with the audio driver, since this does not happen in Linux, and it did not happen when I was runn... Read more

More replies
Answer Match 44.1%

This scanner ran with Pagis 3.0 without any problems at one time. Since my system crashed and HDD was repartitioned and formatted, i can't boot up with scanner on. The driver that came with cd works for a while but it will hang up when i reboot. I tried the newest driver for scanner which does not work at all.
There are no conflicts in device manager and it does recognized scanner by name and model when using driver version " MiraScan V3.20". Anyone have any ideas how to deal with this problem.

Running
OS-Win 95 OSR2
CPU-Celeron 300A
M/B-Abit BH6
Video-Diamond Stealth II S220
 

More replies