Tech Problem Aggregator

HP TouchSmart 600 Windows 10

Q: HP TouchSmart 600 Windows 10

Is this pc compatible with win 10?Thansk

A: HP TouchSmart 600 Windows 10

I have a HP TouchSmart 600 and based on my experience it's not compatible with Windows 10 not even with Windows 8.x and later.

1 more replies
Answer Match 49.56%

Hello, I am Portuguese and I have a driver problem with my computer.
Computer Information (HP):

Model: Notebook PC HP TouchSmart tm2-2050e
Operating System: Windows 7 64bit (service pack 1)
Version bios: f.25
antivirus: avast free
Maintenance: ccleaner and Advanced SystemCare Pro
Update drivers: ma-config and SlimDrivers









The problem is as follows:

The hard drive was in trouble, so it was replaced.

Then I put the windows 7 again.

And there was no problem, until the driver (s) touch (touchsmart) does not work.







I've done:

I tested it with my finger and pen hit the computer screen.

I went to HP's download page all available drivers for my computer, did not work.

Update drivers with the program ma-config and SlimDrivers not resulted.









Link all the information from my computer:
Configura??o Resumo

Link information about my dxdiag (hosted on google docs / drive):
https://docs.google.com/file/d/0B1iZ...it?usp=sharing


Sorry about the spelling mistakes.

And please, help me.

Thank you.

A:Notebook HP touchsmart tm2-2050ep error driver touchsmart

Hi there .... I understand your touch screen is not working .... Is the touch-pad working though ? Is there any errors in the Device manager ? .... Which Drivers did you download from the HP web site ? .... Did you download Drivers from any where else ? ... Also where you able to get Windows activated ?

9 more replies
Answer Match 43.68%

Upgrading to Windows 10 causes my Touchsmart tm2 causes a blank screen. I can't get back to a point to try and recover. I plugged in a monitor but got no picture there either but after I unplugged I got a picture in safe mode but was unable to do anything.

A:Upgrading to Windows 10 causes my Touchsmart tm2 causes a bl...

I have had exactly the same issue.  I had to do a factory reset, then I tried upgrading again with a clean system. Exactly the same thing happened.

8 more replies
Answer Match 43.68%

we have a brand new hp touchsmart 600-1365qd w/ a new Windows 7 and it crashes at least 3 times a day. Sometimes it crashes where it says the problem is blue screen and it says something about dumping, but the computer doesn't know how to let me read the dump file (.dmp), even though I probably wouldn't understand it even if it did.

Other times, it freezes, the mouse doesn't move, or the internet pages just keep working to load (when connection is fine), and ctrl-alt-delete won't stop it and I have to turn the power off and on to reboot. I thought it is a computer problem but you had another post that mentioned Windows 7 crashing so I thought I'd run it by you.

This last crash/reboot happened without me doing anything, and I had excel, and three tabs of the internet running that was it. Any ideas?
Thanks so much!

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8007B0C050
BCP3: FFFFF80000B9C518
BCP4: FFFFFA800A565010
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

A:new hp touchsmart w/ windows 7 keeps crashing

Hello,

Could you follow our BSOD posting instructions?

http://www.techsupportforum.com/f217...ns-452654.html

11 more replies
Answer Match 43.68%

Hello everyone. I have a so called hybrid laptop HP Pavilion Touchsmart 11-n010dx. It has Windows 8.1 pre installed and I don't like it that much. So I decided to downgrade to Windows 7 Home Premium x64 and faced some problems. I've done Windows installation plenty of times before and that is the first time when it's so tricky. First of all the laptop doesn't have an optical drive so I'm using a flash drive. I set UEFI BIOS to a necessary settings (disabled Secure Boot, enabled Legacy Support). I'm using a 2.0 USB port so that is not a problem. The problem is while installing a message shows up that I need a CD/DVD driver. I made some research and decided that I need motherboard or chipset drivers. I tried it - no result. I think I've tried everything but maybe you guys can help me. Thank you in advance and I hope you'll have some ideas concerning my issue.

A:Can't downgrade from Windows 8 on HP Touchsmart 11

Quote:
It has Windows 8.1 pre installed and I don't like it that much. So I decided to downgrade to Windows 7 Home Premium x64


YES & NO, down to your UEFI/BIOS firmware settings.

1) Downgrade to Windows 7.
Downgrade Windows 8 to Windows 7
Warning you must have the UEFI/BIOS firmware setting in Step Three set.

Make sure you read the NOTE at Step three.

2) If Using a USB Pen drive on a PC with a UEFI BIOS.
USB Pen drive need to be formatted to FAT32 as in
UEFI Bootable USB Flash Drive - Create in Windows
Take note of Step 11 for Windows 7.
Also you will need to use a USB 2.0 port, as there are no USB 3.0 drivers in Windows 7.


You will need to buy Windows 7 x64 DVD & product key.

2 more replies
Answer Match 43.26%

Could anyone provide any information as to when Windows 10 will be qualified on Touchsmart 60-1100UK ? Thanks 

A:HP touchsmart 610-1100UK - Windows 10 Qualification ?

... sorry model is Touchsmart 610-1100UKdaveiw100 wrote:Could anyone provide any information as to when Windows 10 will be qualified on Touchsmart 60-1100UK ? Thanks  

1 more replies
Answer Match 43.26%

Hi everybody, please I need help, I am trying to install on a laptop hp touchsmart tx2, but I get the blue screen after inicializing with the cd of windows xp installation, I also tried integrating a sata driver on the same cd (using nlite), with the same result. Please if somebody knows exactly how to do it. Thank you.

More replies
Answer Match 43.26%

Hi, I want to know before purchasing Windows 10  will the HP Touchsmart IQ515UK be compatable ?, I know a fresh install is needed but not sure if  all the necessary drivers are available ? Model #:IQ515UKProduct is #:FR566AA-ABU Thanks.

More replies
Answer Match 43.26%

Hi,

I just installed windows 8 32bit edition on my HP TX2 everything work just fine except the APPS.
Form some reason when I'm clicking on the Apps (Weather for example) I'm getting the nice blue screen of the weather app for about 2 secs and then it's just switch to a the green background and nothing happens.
I get the same results in all the apps except IE,Control Panel , Desktop.
Does anyone encounter with this problem??
My Graphic driver is ATI HD3200
Processor AMD Turion X2 RM-74

Please help

Regards,
Amitay

A:Windows 8 Apps not working on my HP Touchsmart TX2

Welcome to EightForums
Some success has been gained by changing screen resolution. I went up on mine but i don't have touch screen so this may not be your case. Good luck to you.

more replies
Answer Match 43.26%

Hey guys, I have had my TouchSmart for about 2 years, and it's been near a year that my touch input hasn't been working, but since I wasn't really using it, I never followed up until last week. But I was pretty upset when I realized I had a 2 year warranty which was just expired on 02/02/14. I have tried all be basic things that has been suggested on this site or any other sites, such as running Windows update (and yes I installed the optional updates as well). I have also checked and updated all the drivers, and at this point is running out of options. I have a bit of IT experience so I think I know what I'm doing but I'm running out of ideas.      Any suggesstions?  HP TouchSmart 610-1100z CTO Desktop PCWindows 7 Home Premuim - Service Pack 1Product no: QB912AVEverything in Device Manager seems normal (no warning signs) Thank you for help in advance

A:TouchSmart 610 Touchscreen is not working (windows 7)

Hello ShawnShamlou, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.I understand that your t ouch screen on your HP TouchSmart 610-1280qd CTO Desktop PC is not working and you are now out of warranty. I am providing you with an HP Support document: Troubleshooting Touch Screen Issues in Windows 7 that will give you troubleshooting steps to help you resolve this issue. I would focus my attention on the subject "Pressing the touch screen does not do anything" as that is the section that applies to your issue. Please re-post with the results of this document. Thank you for bringing your issue to the HP Forums. Enjoy the rest of your day!

2 more replies
Answer Match 43.26%

Does anyone know if HP or nvidia have or plan to or have drivers to make the HP TouchSmart 600-1050 compatible with Windows 8?
 

A:Solved: Windows 8 and HP TouchSmart 600-1050

7 more replies
Answer Match 42.84%

To try and improve the performance of the laptop, and since a memory upgrade is not an option, I want to replace the 320GB HDD with a 256GB SSD.  I do not have much new software or data on the machine.  Can I use the Recovery Thumb Drive I created to re-install the factory software on the SSD?  It seems to me that it would be the same as replacing the HDD with a new one if it had failed.  If yes, are there any tricks?  I don't think I can use any software to create an image on the SSD as they are different capacities.  Also there is not a CD drive to boot the image creation software from.

A:HP Pavilion TouchSmart 10-e010nr HDD to SSD swap and Windows...

Hi: You may have a problem due to the smaller storage size of the SSD, but you have nothing to lose by trying. Your ssd is big enough to hold what originally came with your PC, but that is not how the recovery disks work. They are built from an image of the smallest hard drive that was offered on that model. That image includes all the empty space unfortunately. So the disk image is normally too big to fit on anything smaller.  

9 more replies
Answer Match 42.84%

Cannot get my HP Touchsmart to play audio or make any sound whatsoever. It was previously connected to my home surround system until I moved and now I'd just like for it to play audio out of the monitor itself. It runs Windows 7. I've checked the volume levels, run the troubleshooting program, and have done the audio tests and there is no sound. I also tried reinstalling the audio driver. Nothing has worked. Ideas?

More replies
Answer Match 42.84%

Any advice much appreciated.   I have an HP Envy Touchsmart 15 that basically won't boot after windows updates.  This is now the 4th time it has happened, twice fixed by Currys (where I purchased the laptop) and once out of warranty by someone else.  It has now happened again and I don't see why I should keep paying to fix an issue that is an original fault with the laptop.  None of the online fixes to restore to Bios work hence why I have to take it to get it repaired.  I'm assuming this is a software issue rather than hardware and so isn't covered by the Consumer Rights Act.  I can't find a complaints contact for HP anywhere on their website and am currently left  as an upset owner of a very expensive brick!! Amy

More replies
Answer Match 42.84%

Pavilion Touchsmart 23 All-In-One Model f339AMD Radeon HD 8670D My screen is so dim after the computer "wakes up" from sleep mode that I can only read it holding my face an inch away. Restarting brings the brightness back to normal, only to happen again the next time the computer sleeps. This has only started happening since upgrading from Windows 8 to Windows 10.  - All drivers are up to date - All Windows updates are up to date - There is no brightness slider in power options - I have no brightness controls on my keyboard Please help me fix this so I don't have to revert back to Windows 8! Thank you all in advance.











Solved!
View Solution.

A:Pavilion Touchsmart 23 screen dim after sleep since Windows ...

I think I might have made some headway with this problem. I had a friend call me up and he was suffering from these same issues. The partial solution (and probably the major part) that I discovered is that there was a critical BIOS update that had not been done. Because Windows 10 was already installed it didn't show up on the HP Support page or the HP Update software. The way I got around this was to tell the HP support website that i had Windows 8.1. The update then appeared. I downloaded the latest BIOS update for his model and installed it. (BTW: it worked just fine in Windows 10). Once I updated, the dim screen issue was resolved. However, as far as the screensaver, auto sleep, or auto hibernate are still not working. You can manually put the computer to sleep via a button or the start menu and it comes back out just fine. His was an AMD based All-in-one and i don't recall if anyone has had issues with the Intel based platforms. So to recap... If you haven't installed 10 yet make sure you do the BIOS update first. If you have, goto the support website and enter your model. Change the OS to Windows 8.1. Download and install. If anyone has anymore insight, PLEASE reply so others can benefit. Good luck and enjoy Windows 10. And if anyone has a solution for the sleep/hibernate/screensaver issue please respond.

10 more replies
Answer Match 42.84%

I reset my HP ENVY TouchSmart 15-j051sa Notebook PC about a month ago and it has been working still but saying that windows is no longer activated and everytime i switch it on now it tells me to go to PC settings to activate it with a product key or something which i dont have. Also since the reset it uninstalled microsoft office from my computer and is now saying it is not activated and i contadted office support but they cannot sort it out because office was already installed on the computer so i have to contact the manufacturer. 

More replies
Answer Match 42.84%

Unable to get into computer stuck on windows restart screen won't reboot

A:Hp envy 23 touchsmart stck on restart in windows 10

You can try to do this following steps 1: Shutdown the Computer .Disconnect the power cable and hold down the power buttom for 5 to 10 sec. and connect the power cable back in. start tapping the ESC on the keyboard with the computer off.  While tapping the ESC turn on the computer . You will see a startup menu . Press F10 once and then scroll down to the option apply defaults and Exit and press enter. 2: If the computer still doesnt start normally you can try to do a system restore.Start tapping the ESC on the keyboard with the computer off.  While tapping the ESC turn on the computer . You will see a startup menu . press F11 and you will be inside Recovery manger . select the option troubleshooting . and then Advanced option . then system restore >> will be able to see the date and time . check the for the date and time when the computer was working fine  . or select the lastest date and start the system restore . 3. if there is no restore points or after system restore if still have the same issue, you can try a system recovery which will competely reset the pc to its factory state , like you had it on the day 1 when you purchased the pc.  For system recoveryStart tapping the ESC on the keyboard with the computer off.  While tapping the ESC turn on the computer . You will see a startup menu . press F11 and you will be inside Recovery manger . select the option troubleshooting and select the option recovery manger , select s... Read more

2 more replies
Answer Match 42.84%

Hello HP, I installed Windows 10 in my Touchsmart 610, the computer worked fine for couple of weeks and then suddenly the screen went black, no mouse or keyboard looks to worked.I seach for the issue in internet and I found that is a common problem that happened with PC that have 2 video boards and the solutino was to change the video from the second board to the video board in the mother board, others blogs state that the problem is fixed updating drivers and other said that F11 bring the screen back.F11 worked for me, after hit F11 several times (Power up/down-hit F11) the windows logo came up and I manage to log in, I checked drivers and all looked updated. I thought all was working but no after few hours and the computer went black again. I tried again F11 and after few days of trying again windows logo came on this time window show that an upgrade was need so I did the upgrade and after reboot the computer did not came back of the black screen. The computer after power up still sound like it starting, if I insert a CD it try to read it, no sure if it does since there is no image.I tried presing F10 to enter in the bios, that did not worked.I try using connect directly USB mouse and key board but that did not worked.Tried to reimage inserting the reimage disk.Since there is no a second port for video I can not use a second display as other blogs recomend. Thanks in advance for your help.

A:Touchsmart 610 black screen after install Windows 10

Hi there @Scorrea,Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts, and other support personnel. I understand you are having an issue with the screen turning black. I will be glad to help you. Here are some documents to help.Display Driver Stopped Responding and Has Recovered (Windows 10, 8, 7)Sleep and Hibernate Issues (Windows 10, 8) Please keep me informed of how things went. If you require further assistance, let me know and I will gladly do all I can to help you.Please let me know if this resolves the issue by marking this post as "Accept as Solution".To simply say thanks, click the Thumbs up below! Thanks.

6 more replies
Answer Match 42.84%

Hello everyone ! I had a problem with upgrading BIOS with HP TouchSmart 610-1280qd  (Windows 10) When I tried to upgrade BIOS toVersion: 7.15  (sp58106.exe)  my computer suddenly shouted down and now I have a black screen with 8 beeps and Windows -B bottoms combination does not work to get BIOS recovery So Probably I need to clear the CMOS - Reset the BIOS and I know in the most cases the jumper is close to the battery   (I have some expireance with old monorail all in one computer)  Do you have a picture where is the  a jumper and what is the easies way to get to the jumper without unnecessary disassembling or maybe you know another bottom combination to overwrite corrupted BIOS   Your Help will be Highly Appreciated !!!   Thank you in advance !   P. S. No warranty for my PC (2012)

More replies
Answer Match 42.84%

Hello,I am dealing with a wireless connection issue from HP Touchsmart desktop with Windows 10. There is an adapter issue. At the moment it's Ralink wireless LAN card installed and there are no other adapters available. Any ideas what to do? Thank you.Spoiler (Highlight to read)   Spoiler (Highlight to read)   

More replies
Answer Match 42.84%

 I brought a HP Pavillion Touch Smart laptop about 6 weeks ago, a couple weeks later a update appeared for the new Windows 8.1 which I installed, since doing so the touch screen no longer works. I have checked the settings, it make no difference still nothing happens. Can anyone help? Toyah

A:HP Pavillion Touchsmart screen not work after Windows 8.1 up...

I HAVE THE SAME ISSUE,I FIGURE THAT THIS IS A SOFTWARE ISSUE, I TRIED MOST OF THE SOLUTION THEY HAVE ON THIS FORUMS BUT NOTHING WORK,I THINK THIS MATTER NEEDS TO BE ADDRESSED EITHER TO MICROSOFT WINDOWS 8.1 UPDATES OR TO SOME HARDWARE DRIVER CONFLICTS. WE NEED SOLUTION ON THIS ISSUE. AND PLUS I HAD THE PLEASE WAIT SCREEN AFTER THE WINDOWS 8.1 UPDATE TOO. THAT MADE ME RESTORE MY LAPTOP IN EARLIER STATE AFTER THE UPDATE.

9 more replies
Answer Match 42.42%

It seems from the forum posts that there are many many people with the same issue, and no solution to the problem!  When will HP take responsibility for this issue and provide a solution? The issue is the "Touchsmart" screen is no longer responding to touch!!!  What's the point of a touch screen laptop if it does not respond to touch!!!! I have been through all the proposed solutions ... device manager... etc. etc... but still nothing... Under System: Pen and Touch it says: It says no pen or touch input is available for this display Please can HP help its customers resolve this issue?

A:HP Envy - Touchsmart Touch Screen Not Working - Windows 10

Hello @HP-Envy, Welcome back to the HP Forums! I came across your post and want to help you restore the functionality of the touchscreen on your HP ENVY TouchSmart m7-j120dx. This seems to be a driver related issue, but could be related to something else as well. To being, please perform a hard reset. Next, I recommend restoring the BIOS so the notebook will research the hardware that it has installed. HP Notebook PCs - Restoring the BIOS Once the BIOS restoration is complete follow the steps in this touchscreen troubleshooting document, I know you have completed most of the steps from it but doing it after the BIOS restoration is key. HP Notebook PCs - Touch Screen Issues (Windows 10)(If component tests is not an option in step four of that document, use the testing for hardware failures document) HP Notebook PCs - Testing for Hardware Failures (Windows 10, 8) I look forward to your reply with the results!

5 more replies
Answer Match 42.42%

please send me the solution for bios setup for winsows 7

More replies
Answer Match 42.42%

I have an HP ENVY Touchsmart 15 (Windows 8) which now showing black screen after  recent BIOS update.  The laptop will power up, but the screen remains black.  The power light remains on, but the screen, CAPS LOCK and WIFI buttons remains unresponsive and don't seem to flash an eroor code.  The sound of the HDD can be heard on boot up, as can the fans. I'm at a bit of a loss where to go from here, if you can guide me than I can resolve the issue.  I can see a few people have had similar problems with other models. If anyone has any suggestions or guidance I'd be extremely grateful.

A:HP ENVY Touchsmart (windows 8) - Giving black screen after B...

Hi AdnanAU, Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I see that you are having problems with your Envy after updating the BIOS. You can try Restoring the BIOS to see if that will get it to boot up. Without the blinking error code it will be hard to figure out the exact issue. How long have you had the notebook for? Thank you,  

6 more replies
Answer Match 42.42%

I'm having a lot of difficulty searching for Windows 7 64bit drivers for my HP Pavilion TouchSmart 14-b109wm Sleekbook. It's originally a Windows 8 laptop but I installed Windows 7 64bit Pro on a spare HDD and got it to run fine. My only issue now is finding drivers for it. My biggest concern are the video drivers and especially the wireless drivers. Any help would be greatly appreciated.

A:Drivers for Windows 7 on HP Pavilion TouchSmart 14-b109wm Sleekbook

Hi ... Welcome to Seven Forums ... See if the Thread below helps ...
Downgrading from 8 to 7 on HP Pavilion Touchsmart

9 more replies
Answer Match 42%

I've been trying to set up a old HP Touchsmart laptop of mine to set up at my homeless shelter, for the residents to use. I can not remember my password. It runs on Windows Vista Home Premium...here's the problem, every time I boot into safe mode or recovery, etc it takes me to the windows login page. I can't do anything because it wants me to log in, what am I doing wrong? If I knew the password I wouldn't be trying to boot in safe mode. Can anyone help?Model # tx2-1277nrP/N NV178UAABA

More replies
Answer Match 34.86%

Hello I have a HP Pavilion TouchSmart Laptop.In the last week the touch screen has stopped working.I was just wondering if anyone was able to help me to get this running again as its really annoying without itThanks in advance

A:touchsmart

Hello @S_tim, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are having an issue with the Touch Screen, and wanted to assist you! To start, can you provide me with the Product Number and Operating System of the notebook?  You can use the links below to help you with that information:HP Customer Support - ProductsWhich Windows operating system am I running? In the meantime, try performing a System Restore to set the notebook back to its previous working state.  If you are still having trouble, then try reviewing the following document, and let me know how it goes: HP Notebook PCs - Touch Screen Issues (Windows 8) Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great day!

1 more replies
Answer Match 34.86%

My hp touchsmart 300 1025 is shutting down unexpectadly. I have had it for a little over a year (out of warranty) and it just started to shut down after a few minutes of use. Not sure if it is an overheating problem or a power supply issue? Anybody with same problem? Suggestions welcome!
 

More replies
Answer Match 34.86%

I am having trouble with the touch screen aspect of my computer. It works to scroll pages, and click icons, but the multi touch to zoom has stopped working. I have already turned off the touch screen and turned back on, and also have reset my comupter back to default. Help please!
 

More replies
Answer Match 34.86%

My question: Is the TouchSmart tm2 compatible with WIN 10 and what must be accomplished to achieve a successful install? First, a slignt rant.I was successfuly running WIN 10 on my TouchSmart tm2 when I updated a video driver and afterwards could only get a blank screen. Yes, my bad! I paid HP $99 for incident support and their only suggestion was to do a full system recovery & reinstall WIN 7 Pro. Really? You made me pay for that?  Since I didn't have the OS disks (it was OEM) I had to pay HP $25 for the media and $15 FOR SECOND DAY DELIVERY ONLY TO HAVE THE MEDIA ARRIVE ON DAY 3.  I can't reach anyone at HP to refund the delivery failure. Now support is stating that my computer isn't compatible with WIN 10. If I was successfully running WIN 10, why is it now un compatable?  

A:touchsmart tm2 and win 10

I have just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.

3 more replies
Answer Match 34.86%

Hi, I have a touchsmart tm2, with windows 7 x64 and  i could use a external monitor, with no problems.when i upgrade to windows 10, the external monitor canīt be deteted.i upgrade the amd driver and the intel driver, but it donīt work.Can anyone give a help! Best regards 

More replies
Answer Match 34.86%

Buongiorno, volevo sapere se c'č una varsione aggiornato TouchSmart suite per windows 10.Dopo l'aggiornamento da Windows 7 a Windows 10 icona non funziona pių.Grazie aspetto

A:HP TouchSmart

  hi this is a English support forum not Italian

1 more replies
Answer Match 34.86%

Hello I have a HP Pavilion TouchSmart Laptop.In the last week the touch screen has stopped working.I was just wondering if anyone was able to help me to get this running again as its really annoying without itThanks in advance

More replies
Answer Match 34.86%

Hello, i have a HP TouchSmart computer that i need to reformat badly. I am wondering if reformatting it with any regular vista CD key will lose such features as the touchscreen, wireless mouse & keyboard, built in webcam.

The Original owner of the computer claims it came with its own Vista CD key that he lost.

A:HP TouchSmart

Hi Jack0000


If the HP restore partition is in good condition (not damaged or malware-ridden), you can perform a re-write of the factory-original hard-disk-image by tapping the F11 as your HP is first powered on, then following the prompts as shown (step-by-step, with screenshots) in the following instructions at the HP support website --- http://h10025.www1.hp.com/ewfrf/wc/d...=3752240#N1066

Note that you'd first want to move any data that you wish to save off to removable or external media before you run a return to factory original.

Once the factory-original image is restored, you'll have to visit Windows Update to get the Security Updates since the TouchSmart was shipped. You'll want to update the Security software as well (if you need a free alternative, I think "avast! antivirus" is a good choice).

Once the PC is updated and fully protected against malware, you can then create a recovery disk set onto DVDs following the instructions from this HP support webpage --- http://h10025.www1.hp.com/ewfrf/wc/d...name=c00882383

Having made your own Recovery DVD set allows you the freedom of running the recovery onto a new, blank drive - should you need or wish to upgrade to a new hard drive in the future.

You can, of course, also order Recovery DVDs directly from HP for most models. The price is considerably less than purchasing a Windows license retail. Much less.

Best of luck
. . . Gary

2 more replies
Answer Match 34.86%

Good morning, I wanted to know if there is a varsione updated TouchSmart suite for windows 10.After the upgrade from Windows 7 to Windows 10 icon no longer works.Thank look

A:HP TouchSmart

  HI there is no windows 10 driver for HP Touchsmart 600-1205it 

1 more replies
Answer Match 34.86%

My HP Touchsmart 600 desktop computer has a roughly 5 inch square dead spot on the upper left hand corner of the screen.  Is this a problem that can be easily repaired?  If so, can this be repaired locally? Thank you... Bruce A. Henderson

More replies
Answer Match 34.44%

Hi, The LCD on my Touchsmart 11 has failed. It was flickering vertical lines for a while and has now died completely. The HDMI output still works. The laptop is out of warranty. How can I send this back to HP for repair and any idea of cost? Thanks, David

More replies
Answer Match 34.44%

I have an hp touchsmart iq 506 and I wanna do a dual boot by adding xp to it. but I need some explanation please if you can help me

More replies
Answer Match 34.44%

Upgraded to windows 10 and now unable to use convenient features I've had for years.  My touchpad is disabled, so can't just tap the pad to select what I want; my DigitalPersona fingerprint is disabled and in trying to enable it again, it appears to want to trick me to permanently delete my saved fingerprint.  How can I get these features back.  Thanks.

More replies
Answer Match 34.44%

Good Evening, I have a HP Touchsmart TM2-I can supply the specs if you need them- and it has just started to crash at almost every click/action which I take. THis has only happened within the last couple of days and it has been instant, rather than over time. I did a System Restore but this didn't solve the issue. It may ahve been because I had to stop a disk check last week because my laptop battery died but I'm not sure if that would have such a big effect on the laptops performance.

Any help is greatly appreciated!

Thanks a lot
Dan

A:Hp Touchsmart TM2 crashing

That would have a huge effect not finishing a disk check. If you can boot in, Make sure you have your power adapter attached, Go to Start/Search and type CMD Right click the CMD.exe icon in the Search Results and Run As Administrator. In the Command Prompt type chkdsk /R and press enter. Now type a Y and reboot the computer. The Check Disk Utility will try and fix any problems.

3 more replies
Answer Match 34.44%

Hi all,

I have been getting BSOD sporadically on
HP touchsmart 600 all in one pc Home premium Windows 7 64bit.

I updated the driver but nothing happened. also uninstall all unnecessary programs but nothing yet.


Last dump info:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80003090611
BCP3: FFFFF880009A9998
BCP4: FFFFF880009A91F0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\041715-20982-01.dmp
C:\Users\Admin\AppData\Local\Temp\WER-361111-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


Your help is well appreciated.

Thanks

A:HP touchsmart 600 with BSOD

I wanted to add that, this might be happening when updates are getting installed or something like that.

5 more replies
Answer Match 34.44%

I upgraded from windows8 to windows10 and now all of my touchsmart software for tm2-2150 is gone.  Where do I go to download? 

A:hp touchsmart software is gone for my tm2-215

Hi, Only available for Windows 7. Please check to see they work or not:     http://support.hp.com/us-en/drivers/selfservice/HP-TouchSmart-tm2-Notebook-PC-series/4247583/model/4... Regards.

1 more replies
Answer Match 34.44%

Hello, so I have a hp touchsmart 600-1350a although theres no av cable or hdmi port i checked on the web and it said thathp touchsmart has a hdmi port, also I dont have any ambient light too?

A:PS4 to a HP Touchsmart 600 - 1350a

Hi @markdag, Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel.I understand that you are looking for information on connecting your Touchsmart  All-in-One to a PS4. I am happy to give you a hand with this. The available connections on Touchsmart and All-in-Ones in general vary from model to model. Some have an HDMI port that can be used as an input, and others do not. Looking at the specifications of the model you gave: HP TouchSmart 600-1350a Desktop PC Product Specifications, it shows in one diagram that it could potentially have video inputs, but it is an option. If your system does not have those, then you would not be able to use the display on the All-in-One with your PS4.   I hope that helps clarify, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.   

1 more replies
Answer Match 34.44%

I'm wanting to add a second screen to my Touchsmart 520 for work but i'm not sure if i can do this or how to do this.. please help.

A:Can i add a second screen to my HP Touchsmart 520

Depending on what the device is expected to do, something along this line might be what you desire.http://www.amazon.com/Plugable-Graphics-Multiple-Monitors-1920x1080/dp/B004AIJE9G/ref=sr_1_12?s=elec...

1 more replies
Answer Match 34.44%

My HP TouchSmart 610 All-in-one had a component failure and had to have a reinstall.How do I reinstall the TouchSmart software for webcam, video, photos, etc?

More replies
Answer Match 34.44%

Machine is overheating. Dismantled and lots of dust etc cleaned out but small fan is not working and need a replacement.   Bar code number of existing fan is 1323 00230H2 oA F000 099L     06LH

A:where can I get the smaller fan for an HP Touchsmart 300 PC ...

Hi there @Superuserhp, Welcome back to the HP Support Forums! I understand that you are looking for a replacement fan for your computer.  I am happy to help with this. I would recommend that you check out the HP Parts Store. Be sure that your country is selected and then put in the product information. If the part is not currently in stock, there will likely be authorized sellers listed for the part as well. Please let me know whether that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

1 more replies
Answer Match 34.44%

I have an HP Envy20 AiO touchsmart pc and just installed win 10 and it has been working fine and I restarted it today and the power button lights and the fan goes but the screen remains black. I can use my mouse but not my keyboard and every few minutes it sleeps numerous times for seconds then comes back yet the screen stays dark.

More replies
Answer Match 34.44%

I am new to the forum but a long time computer tech. I have been to the forum on various occasions for help on fixing different issues. I have to say this is a great community that helps alot of people including myself. I've ran into an issue that I believe is needing some of you guys expertise.
What I have is a touchsmart laptop from HP that the keyboard and the touchpad mouse quit working. I have searched all over the internet looking for answers and came across a few telling me to pull the battery and AC adapter to reset the computer. I've had no luck on this being a solution. I have read that booting the computer with the touchscreen facing out is what causes this issue.

So I've tried pulling the power and the battery then holding the power button in to drain any residual energy left on the CPU. And upon booting the computer keyboard will respond but only for the menu that states for starting Windows normally or in Safe mode. After letting the computer boot completely the keyboard and touchpad quits working altogether. This is booting it up in safe mode or in normal mode. The laptop is running Windows 7 Home Premium and I believe that this is my only issue. Any help or ideas on what else to troubleshoot will be greatly appreciated. Thanks in advance.
 

A:HP Touchsmart tx2-1377nr

bump
 

1 more replies
Answer Match 34.44%

Hi
My mother bought one of these and the keyboard broke. So I'm using the touch pad.
Problem is the more peculiar buttons like Prnt Screen and Delete went missing.
They went missing for some unknown reason as I was typing.

Does anyone have any experience with this trainwreck of a computer?
 

More replies
Answer Match 34.44%

I've got a TouchSmart 610-1280qd desktop. It was working fine until 1 week ago when my home had a power outage. Now, it won't even boot up. No power, nothing. Even the power brick light is out. I bought a replacement power brick and when I plug it in, the green led light on the new brick(the old is blue) immediately goes out and there's still no power. The power button effects no response, nor does any button on the keyboard have any effect. There's just no power to the entire computer. I've tried plugging both the old and new power bricks in and initially, the blue and green lights on each respectively go on, until I plug them into the desktop.  Then the lights go out and still no power and no response by pressing the power button or any button on the keyboard. I've also tried plugging in the old and new power bricks without the surge protector. The power bricks lights go on, but as soon as I plug them in, still no power. I've tried different outlets around my house and the power bricks lights go on, but as soon as I plug them into the desktop, no power. I've tried plugging he power bricks into the desktop first, then the outlets, and no power at all either in the desktop. There is no response at any stage where i've pressed the keyboards buttons. The desktop just doesn't have any power at all.   Anyone have a problem with this? I really hope it isn't what I think it is and the motherboard is out.      &nb... Read more

A:Touchsmart 610 no power

Hi there @MrJimCee1, Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that your computer is not starting properly and does not appear to be getting power. I am happy to help with this.  I recommend that you look at this document: HP PCs - Computer Does Not Start (Windows 7). For your purposes you are probably going to have to do Step 1 and then in Step 2, the first section "The computer does not turn on".  If after finishing Step 2 there is a change, and the computer is getting power let me know if there is still an issue I can help  you with, if it still does not receive power, then you should contact phone support. Please use the following http://www.hp.com/contacthp and create a case for your issue and contact HP. If you live outside the US/Canada, please click the link below to get the contact information for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html Let me know how that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

1 more replies
Answer Match 34.44%

I have a HP TouchSmart Computer. Since downloading updates from HP and Microsoft - my computer does not want to work - My Computer uses Vista.

It starts off fine, however as soon as I open a programme, task manager, anything - it stops says its 'not responding'. The only way out is to hold the power button in for approx. 5 secs.

I am not to up on computers, I have tried lots of things, i have had a couple of codes 0x490 and 0xc000000f - but I am not lost - I am using my old computer to put this message on here - whilst my HP TouchSmart sulks.

Any Help Please ~ Thank You in advance ~ Gail
 

More replies
Answer Match 34.44%

Have trouble for weeks.

Details:

? OS - Windows 7 Ultimate x64
? What was original installed OS on system? = Vista
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? HP oem
? Age of system (hardware) 2009
? Age of OS installation - have you re-installed the OS? december 2011

? CPU = Mobile DualCore Intel Core 2 Duo T9900, 3066 MHz (11.5 x 267)
? Video Card = NVIDIA GeForce 9600M GS (512 MB)
? MotherBoard = Asus IMIMV-CF (Maureen) (2 Mini-PCIE, 2 SO-DIMM, Audio, Video, Gigabit LAN, IEEE-1394)
? Power Supply - brand & wattage = unknown

? System Manufacturer = HP
? Exact model number (if laptop, check label on bottom) = TouchSmart IQ830NL

A:HP TouchSmart BSOD

Hi -

I received your PM re: no dump files.

When are the BSODs occurring? (immediately after boot-up or ... minutes, hours later?)

Please see - NO KERNEL MEMORY DUMP FILES BEING PRODUCED UPON BSOD?

Can you read info from the blue screen? I'm looking for the STOP error and a driver name.

Regards. . .

jcgriff2

`

11 more replies
Answer Match 34.44%

moved house recently, hooked the computer back up in the new office and the wireless keyboard worked for about 2 minutes. I changed the batteries but to no avail. Went and bought brand new batteries and again no go but the wireless mouse is still working fine. I have tried the blue connect button on the back of the keyboard but still nothing. Any ideas or suggestions

A:HP touchsmart 520 keyboard

To help you troubleshoot the issue with wireless Keyboard, please find the link given below and follow the step-by-step instructions mentioned on it:http://support.hp.com/in-en/document/c00006821#AbT1 Hope this will help you.

1 more replies
Answer Match 34.44%

Windows media center live tv works. Touchsmart live tv product of Cyberlink, comes up with a blank black screen. Seems there should be some way to e.g. sync these two programs to Touchsmart works. Any ideas are appreciated.

More replies
Answer Match 34.44%

So I have a question...I am wanting to upgrade my 4GB of RAM to 8GB of RAM. I know type I need but I don't know if I need to buy another 4GB Module or if I need to buy the 8GB kit...Do the RAM Module need to be the same brand or can they be different brands and work.
 

A:Hp TouchSmart 320 Ram Upgrade

8 more replies
Answer Match 34.44%

Hello!  I have a TouchSmart 600--an all-in-one with several inputs except one for a second monitor. (On Windows 7). I purchased a VGA - HDMI (AV?) adapter hoping it might work.It did not.Asking for help, or a direction, please. I've searched through several different forum threads similar to mine, but the responses were several years old with no resolution besides perhaps I should have gotten a USB adapter. I've yet to find someone who successfully paired a second monitor. I did get to Display - clicked detect. Nothing was detected. Second monitor (19inch Acer) says no signal. Appreciative of any advice    

More replies
Answer Match 34.44%

Hi all,

Does anyone here experience install Win XP Pro on HP touchsmart tx2(downgrade from Vista)? I need some advise. thank you.

A:Install XP on HP touchsmart tx2

I would advise you not to install XP on a touchsmart PC. The reasons are as follows.

1. Make sure all of the drivers are available on the HP Support website.
2. Since XP tablet edition is not available in retail, the touch screen won't work.
3. You will have ask HP to give you a OEM version of XP tablet edition (which I don't think they will provide).

If you just want to use it as a non-Touch screen PC. Go you may go ahead only after you have confirmed that the drivers are available.

Post back if you have any more questions.

2 more replies
Answer Match 34.44%

I was unplugging my power cords and I happened to turn off the power to my HP Touchsmart. Later on when I turned it back on, my HP Touchsmart won't switch on. The lights on the big batter adapter thing is on. The light at the back of the computer indicating that power is reaching the computer is on. However, I just can't turn it on at all. The power button does not light up.I've tried the solutions posted on other threads but nothing has worked. I had just been using my computer the previous day. I suspect that me turning off the main power might have done something.Look forward to getting some solutions.

More replies
Answer Match 34.44%

My HP touchsmart 520 pc is not booting up and I am looking for support.  Using a multi tester to test the power adapter the adapter reads 17.30v however when i plug the adapter to the computer the light above the power outlet flashes for a split second and disappears. When I unplug the adapter from the back of the computer and checks voltage it reads 0 v (zero volts) . I have to plug it out of the main source and back in so it reads 17.30v again. Once plugged into the computer it immediately drops to zero. I need help to know the source of my problem if it is the adapter or the computer.

More replies
Answer Match 34.44%

I have been dealing with a broken home on my laptop for more than a year. I just searched these forums and found ~70 posts all with the same issue. This seems to be due to poor design that never should have made it past the quality assurance engineers, having a metal hinge screwed into non-reinforced plastic. I find it reprehensible that a premium laptop was made so poorly. I am told by local PC repair shops that it will cost me $400+ to get this fixed. That's 1/3 what I paid for the machine in the first place.I tried calling support and was directed to log onto the support site for assistance, from which I was directed to search the forums. I thought HP made better products than this, but hadn't wanted to put up the money to get one to find out. Then I bit the bullet and got rewarded with a busted hinge on a laptop that spends its days being used by my wife at home, bring opened and closed 2-3 times per day. And now it seems like I'm going to get the runaround to get this fixed, or just have to trash an otherwise great machine due to crappy hinges. I love this laptop as far as performance and hardware specs go but it is a pain to open and close to try and avoid breaking the other hinge and essentially removing the screen.Any guidance on what I can do to get an actual answer or a case submitted to get any useful help?

More replies
Answer Match 34.44%

I have a currently crippled HP touchsmart 300-1003. I replaced a dead hard drive with a new 1TB HDD. I have available to me 2 sets of touchsmart recovery disks, and Windows 7 Bootable USB drive (made with win7 tool). The official recovery CDs do absolutely nothing but tell me MBR IS MISSING PRESS CTRL ALT DEL TO RESTART. The bios lists my new HDD (can tell because size is now 1000GB). I cannot choose USB drive as first boot in bios or boot order (this pc has two different menus for the same function, idky). Is there a bootdisk I can use to fixmbr? Please be so kind to provide a guide to getting a touch computer running from the begininng. All the advice online seems to be for computers that will go to a recovery screen already. If I could do that I wouldn't need the disks, lol. I would like to install the touchsmart software but will settle for any windows at this point. Thanks in advance to anyone that is able to walk me through the process.1 Hour Later: To use MSWIN7 USB Tool, I had to ENABLE BOOT DIAGNOSTIC from BIOS, power on, let the black screen read Configured 01 usb drive, ctrlaltdel, f10 to bios again, disable boot diagnostic screen, save and continue f5, then hit ESC for tiny boot menu at the HP LOGO, pick USB 2.0 as first boot. The tool started windows as Repair (which I followed MSguide for bootsec and /fixmbr, no clue if that fixed mbr tho) and Install Windows 7. I picked install. More updates to come.

A:HP Touchsmart 300-1003

hi i would download a hdd utility from the maker of the harddrive ,burn it to cd ,usually instruction on ther sitr on how to do this ,to setup harddrive for first time use,it may just need to be formatted to create that mbr that seems to be missing .
burn it to cd ,usually instruction on ther sitr on how to do this ,,
a list of links to most makers can be found on bleepingcomputers i thought but i couldn't fine i ,i will post this site with links to most makers .good luck
http://www.tacktech.com/display.cfm?ttid=287

5 more replies
Answer Match 34.44%

I bought a8GB [2x4GB] DDR3-1333 RAM Memory Upgrade Kit forto upgrade my HP Touchsmart 600-1050 All in one. However, it hadn't worked and showed only black screen after installed.The discription is4GB DDR3-1333 PC3-10600 Non-ECC Unbuffered 204 Pin 1.5V CL=9 Memory After then, I bought a different one of8GB Kit (4GBx2) DDR3 1600 MT/s (PC3 - 12800) CL11 SODIMM Notebook Memory Modules CT2KIT51264BF160B / CT2CP51264BF160B at amaozn.com It has the same problem.Are those not compitable with my computer? If so, please let me know a compitable memory set for upgrade.   

More replies
Answer Match 34.44%

Hello

My HP Touchsmart has never worked properly, Tons of problem, crashing error message etc etc. Computer was sent to HP for repair but it came back whit the same problem. I have spent hours with HP tech support running scan and making recovery with no succes. Recently I have replaced the hard drive on HP tech support recommendation. it worked for awhile but now it dosen't even boot! I don't want to call HP anymore and I wander if somebody can help me or if I should just give up.

Thanks
 

A:Trouble with HP Touchsmart

Call HP and ask to talk to a manager, then explain what's happened and the number of times you called and that you've had to send it back and demand that they replace the computer with a new one. All-in-Ones are similar to laptops, the repairs are expensive and parts are hard to get, it's best to get the manufacturer to repair or replace it especially under the warranty.
 

3 more replies
Answer Match 34.44%

I am attempting to repair an HP Touchsmart 300-100.....system fires up....no screen but fans are going like crazy....replaced CPU.....no difference !.....HDD light doesnt light up but you can feel the HDD running if you touch it !.....Motherboard failure ?
 

A:HP Touchsmart 300-1000

Is it actually a 300-1015uk(VG254AA) or a 300-1025uk(VG255AA) HP TouchSmart model?

Screen Is Blank After Starting Computer

----------------------------------------------------------
 

2 more replies
Answer Match 34.44%

My hard drive is going bad (does not recognize hard drive on startup, did have a periodic clicking noise recently but that has gone away). 1.  Is there a way to confirm if its the hard drive or controller2.  Will the recovery USB load the OS?  If so which one.  I upgraded to Windows 10. Thanks for your help.

More replies
Answer Match 34.44%

I have turned on the pc and found out that there is "cpu fan not detected" f1 - boot.I was advised bybthe owner to use vaccuum cleaner to clean the fan at the bottom. It works pne time but after a while comes the same problem again. How can i solve it without opening the product?

More replies
Answer Match 34.44%

I have turned on the pc and found out that there is "cpu fan not detected" f1 - boot.I was advised bybthe owner to use vaccuum cleaner to clean the fan at the bottom. It works pne time but after a while comes the same problem again. How can i solve it without opening the product?

More replies
Answer Match 34.44%

I am experiencing with a laptop of series hp touchsmart tx2 !

The problem is that the whole view that i get on the screen is not getting loaded only half the screen is shown . I dont know what might be the error behind this ? And in case u think this might be due to i dropped my laptop or something it is definitely not . I have not dropped my laptop .

Can some please suggest to me what might be the problem ?
 

More replies
Answer Match 34.44%

Can I install XP on this workstation? It's now runnig on Vista.
I think that will get a problem with the drivers.....

More replies
Answer Match 34.44%

I recently baught a hp touchsmart 320-1010a running windows 7 home premium and then installed a new version of windows (windows 7 ultimate) and now the touch screen doesnt work and i have non of the hp touchsmart applications like, hp magic canvas and others. i installed all the drivers from the hp webbsite and it still doesnt work
can somebody please help??? im dying here !

A:My HP Touchsmart is broken please help!!! )';

Download Drivers from the HP Site, Download originals. Make sure you are downloading 64 Bit if you have a 64 Bit OS or x86 for 32 bit Windows.

19 more replies
Answer Match 34.44%

ok guys i really need some help/guidance here.  There is so much infomation here that im sincerely overwhelmed... I will give you as much information as I have and hope SOMEONE can help! First, I hope i selected the correct board to write this in. As stated, I have a pavilion touchsmart23 all in one pc. I am NOT at ALL computer saavy so work with me here. I dont know if its 32 bit or not nor do I know if it is imperative to my issue. Here is my problem. My computer works fine 70% of the time. Suddenly the screen will go black and give me a disk boot error message. I cant remember word for word but this is what it saYS: "no boot disk has been detected or boot disk has failed". When this happenes, I have to disconnect the computer from the wall and reconnect and start over. This always fixes it so it leads me to believe it is some sort of glitch. I called HP and they told me to run a system quick and extensive check on the hard drive which i have done. Both passed and no errors reported. Another thing that will happen is that the screen will go dark, (typically after idling and when i return and move the mouse or type on keyboard, the screen never lights up again as its supposed to when it is no longer idling. It stays VERY dark and I can barely makeout the screen.  I am not sure why this is happening nor do I know what steps to take from here. I am hoping someone can suggest the next step for me or refer me to a thread that already covers thi... Read more

A:hp pavilion touchsmart 23 all in one

2 more replies
Answer Match 34.44%

Hello, Our TouchSmart PC will no longer turn on. It was working yesterday but today will not turn on. The LED on the back of the computer where the power supply meets the PC is off. When you press the power button the LED light flickers green one time but remains off. The computer does not power up at all. I have tested the power supply with a laptop and it is working. I have also tried another identical powersupply on the PC but the same thing occurs. Thanks  

A:HP TouchSmart 520 All-In-One Won't Turn On

Hello @cb086, I have reviewed your post and as the adapter works on another device I believe you problem is on the motherboard. The issue appears to be a physical issue. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.I would like to thank you for posting on the HP Forums. Have a great day!

2 more replies
Answer Match 34.44%

Hello everybody. I would like my Hp touchsmart 300 desktop to be upgraded. i only have 2.7GHz as my processor. I would like it to have atleast 3.7 GHz. Do this pc have graphics card? I would like to buy one to place or replace if there is a graphics card. I will also make this pc 8 gb ram. Any  suggestions what parts i will buy 

More replies
Answer Match 34.44%

New Computer, that I need to send in, but for piece of mind, I would like to know what's going on. They will repair back to original state, but I will have to reload all programs. Want to make sure that it is not a conflict. Windows 7 64 bit Ultimate.
Thanks in advance for all the help.

A:BSOD - HP TouchSmart 600

SNAFU, welcome to the forum. That is quite few dumps! I looked at your four most recent dumps. All have the same error code and are nearly identical.

I recommend that you uninstall Zone Alarm using this uninstall tool: http://download.zonealarm.com/bin/fr...cpes_clean.exe. ZA is a documented and well known cause of BSOD's on some Win 7 systems. Make sure Windows Firewall is turned on.






Quote:
Error code 7F, UNEXPECTED_KERNEL_MODE_TRAP.







Quote:
Usual causes: Memory corruption, Hardware (memory in particular), Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack



Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c1c000 PsLoadedModuleList = 0xfffff800`02e59e50
Debug session time: Thu Nov 4 16:19:58.484 2010 (GMT-5)
System Uptime: 0 days 21:58:02.827
Loading Kernel Symbols
...............................................................
................................................................
.............................................
Loading User Symbols
Loading unloaded module list
....
************************... Read more

3 more replies
Answer Match 34.44%

Hi

I have just bought one of these damaged. The screen is smashed, there is no HDD, RAM, Battery and Power Supply. It also has bad damage to one corner (been dropped from a huge height by the looks) thus damaging lid, palm rest and base. I know RAM and P/S are not a great cost issue but I'm not sure if it is worth buying a new screen and hdd for it. I paid ?42.00 for laptop as it was part of a job lot, and I see they retail at around ?500-?600. Should I fix it up to sell or keep, or just sell it as it is to see if I can make a slight profit?

A:Hp touchsmart tm2-1010ea

Forgot, obviously, not been able to check MOBO on it either yet, no spares to check it.

6 more replies
Answer Match 34.44%

Hello I have a touchsmart 300 and it has no sound from the speakers or headphone jack. I have tried the troubleshoot thing and it dont recognize anything wrong with them. please help. ive tried updating the driver and it says it is updated. so lost. thanks.
 

A:Touchsmart 300 no sound

Did your pc have working sound when new?
Check the volume level, it's easy to turn it right down or mute it.
Check if the speakers are selected by going to the speaker icon in tray near the current time.
Right click on speaker icon, choose 'playback devices'.
A new box appears, with a speaker and it should have a green tick over it.
Right click on the icon and choose the option 'test', you should hear audio tones.
If you don't have a green tick, right click on icon and choose 'enable'.
 

1 more replies
Answer Match 34.44%

Hi, I just recently got an Envy All-in-One Touchsmart; it is a super machine and so far, so good. The 10-point touch is really cool, but there are many instances when I would like to be able to use a pen in order to be more precise in my pointing or to "mark up" a document.  I know Microsoft Office has the "inking" feature because I use it on my Laptop with a "pen" while I am traveling and have found it invaluable -- and, by the way this laptop is both touch and pen enabled. I tried to enable "pen" by going to the Control Panel feature that is says says Pen and Touch, but when you do so, it is only for Touch.  How can I make it so that it both touch and pen enabled?  If that is all possible, what type of "pen" do I need? Thank you very much











Solved!
View Solution.

A:Enabling Pen on TouchSmart

Hi AIResnick, A stylus used on a capacitive touch screen basically just takes the place of your finger, so enabling touch on the computer will enable pen input as well. But it can't just be any pen or stylus, the material at the tip has to be something that will register as touch on the screen, and not scratch it. I read your other post and I understand you're looking for a finer-tipped stylus, rather than the ubiquitous blunt-ended, eraser-type stylus pens. That limits your options quite a bit, because I believe the larger surface area is part of what makes those pens work on capacitive screens. (Other types of touch screens can use other styles of stylus, including pointy-tipped ones in some cases.) I've heard good things about the Jot Pro from Adonit. I haven't tried it, so I can't speak from experience. The design seems clever--it looks like they attached a clear, flat disc to the tip of a metal pen, so you can see precisely where you're writing with the point of the pen, but the clear disc provides enough surface area for the touch to register, and prevents damage to your screen from the sharp pen point. I hope that helps.

4 more replies
Answer Match 34.44%

Hi, I need to purchase a new motherboard for my TouchSmart 610.  I've opened up the computer and found that the motherboard installed in the computer is model number DA0ZN8MB6I0 (Part number 648511-001).  While trying to find a place to purchase this mother board, I see that is motherboard is fairly expensive.  While searhing I also found another motherboard, model number DA0ZN9MB6H0 (Part number 648512-001), which is also used in the TouchSmart 610.  Visually this motherboard looks the same at the orignal motherboard and is significanly cheaper.  The part numbers differ by only one digit (before the revisoin number, 001), which makes me think that the two motherboards are very similar. Does anyone know if these two motehrboard are compatiable/interchangeable?  Where can I get information on the difference between these two motherboards? My motherboard has a built in video cards, does anyone know if the second motehrboard does as well?  or will I need to purchase a seperate video card if I were to purchase that motherbaord? Thanks for the help.

More replies
Answer Match 34.44%

In my quest to clean out a bunch of unused programs, I found that I have HP TouchSmart Recipe Box.

After researching about this, I decided it just might be something my wife could use; however, everything I have read about it says it is for HP TouchSmart computers.

My desk-top is HP but I don't think it is a TouchSmart.

My question is, must we have a TouchSmart computer to utilize the HP TouchSmart Recipe Box ?

Thanks.
 

A:HP TouchSmart Recipe Box ???

Try these Google searches:

HP Magic Canvas
HP TouchSmart Recipe Box

What exact model of HP do you have? I find it difficult to believe it isn't a touchsmart if it came with the software. It looks like the apps can be used with a keyboard in many cases, though. See review video in your other thread.
 

1 more replies
Answer Match 34.02%

Hello I need some help. I can record a video if need be. my touchsmart 300 recently stop working or has a black screen when turn on followed by air blowing noises.  Can an someone let me know what to I need yo fixed this as I have some files on the desktop i want to transfer to San externalthankAkilo

More replies
Answer Match 34.02%

I'm having a heckuva time upgrading the RAM on this machine. For starters, I attempted a RAM upgrade several months to a year ago. I went to HP Customer Support product page to learn what kind of RAM I needed, and how much the maximum was. It doesn't appear the RAM info on the product page is correct, because I ordered what I thought was EXACTLY what I needed and when it arrived and I took the machine apart to install the RAM I discovered there was NO WAY what I bought was going to fit. The product page says the machine has PC3-10600 DDR3-1333 RAM installed. What I bought was PC3-10600 DDR3-1333mhz 240 pin DIMM desktop RAM. It appears the rub is desktop RAM vs. laptop RAM. HP's product page doesn't specify the Touchsmart 310 uses laptop RAM, or at least what I suspect is laptop RAM. The installed RAM is small (SODIMM?) where the RAM I bought to upgrade is large "stick" RAM. The RAM that is currently installed in the machine has a sticker on it that reads "1RX8 PC3-10600S-9-10-B1". I just need to know without a doubt what to buy to do the RAM upgrade, because the machines performance is poor, returning mailorder items are a hassle and I don't necessarily enjoy tearing apart my computer for essentially no reason. To add insult to injury, after I realized the mailorder RAM wasn't going to fit, I put the computer back together without writing down the specs of the installed RAM to attempt to resolve the dilemma, so I had to tear the machine apart today (and put it back together) ... Read more

More replies
Answer Match 34.02%

My 8-year old HP Touchsmart (a fantastic machine) is running extremely slow.
 
I can't say that it happened suddenly - more like slower and slower over time.
 
We upgraded to Windows 7 Professional several years ago and it has run fine for several years.
 
Right now it's on the verge of what can be considered usable - my spouse mainly uses it for reading email in the browser but it is painfully slow.
 
I have run Malwarebytes but couldn't see any serious security issues.
 
I'm hoping that you guys can guide us through at least a cursory review of possibly unneeded things that might be slowing the machine down.
 
I have a attached a basic snippet from the control panel System Info screen.
 
Thanks in advance for your help and time. 
 
We'll attempt to follow instructions carefully and will not attempt any other steps/remedies in the mean time.
 
If this is not the right forum, please direct me to a good place!

A:Slow Win 7 HP Touchsmart Core 2 Duo 2.0 GHz

Snapshot of CPU Usage

0 more replies
Answer Match 34.02%

TouchSmart button does not launch program  The "home" touch button on front of the HP TouchSmart does not launch the HPTouchSmart software anymore.I assume it must be a software problem. Has anyone a solution? Or does anyone know which processes are involved with the button

More replies
Answer Match 34.02%

I have a touchsmart 600  1160NL with windows7when I use the F9 button (diagnostic) then i get an error it says BIOTS-1it has worked but there was a crash of the harddisk after inserted a new disk dis error occuredi heve the original install discs used tot set the new harddisk up.can anyone tel me what this means ?? 

A:Help my touchscreen from my HP Touchsmart 600 is not workin...

The problem is I have a wirless keyboard and mouse and the mouse is not working so I cannot do anything I have a windows 7 HP Computer and im trying to see is it touchscreen

3 more replies
Answer Match 34.02%

Hello..

My Problem is: i have a HP TouchSmart TX2 laptop. and when ever i shutdown my laptop i cant turn it on again. i need to hold on to the power button for about 30sec.
then i can turn it on. by now i still can use it. but it really makes me worried.

Model : HP TouchSmart TX2 s/t: tx2-1115au
OS : Windows 7 Ultimate 32bit
Ram : 4GB from original
HDD : 320GB from original
 

A:Motherboard problem, HP TouchSmart TX2

Your computer might just be going into standby mode instead of actually powering down, check your shutdown settings.
 

3 more replies
Answer Match 34.02%

Same problem as some of the others with touch screen not responding.  It works part of the time and then stops. BUT this is the weird part...  if I press control/alt/delete and select Task Manager then select "X" to close the box (without doing anything), the touch screen will work again.  It used to work for a day or two at a time.  Now I have to do the Task Manager thing about every 10-15 minutes.  It's driving me nuts!!  At most I have my email and maybe 2-3 browser tabs open.  I am in no way a techie person.  If someone could help me using plain English that would be wonderful. Or tell me this thing is dying and I need a new one.  Help, please!! Product E1P04AVModel 15t-i100

More replies
Answer Match 34.02%

Hi, I'm having troubles turning my laptop on. I have a Hp Envy 15 Touchsmart. I've tried doing a reboot by taking the battery out and holding power for a minute and trying to reboot it but nothing happened. It was plugged in and fully charged when it turned off. The charging light is still on when it is plugged into the wall.A few weeks ago it randomly restarted and shut off when I was watching a movie on it but it rebooted no problem.My phone fell out of my hand 3 nights ago and landed just left of the track pad when it shut off and won't turn back on.

More replies
Answer Match 34.02%

I attempted to reconfigure the speakers and reinstall the audio driver and I still have zero volume coming from the computer. Any suggestions?

A:Sound issues for HP TouchSmart 520 PC

Hi Nksauer, Welcome to the HP Support Forums, I have you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I see that you are having some audio issues. Do you hear any sound when you plug in a set of headphones or external speakers? What operating system are you running? What is the product number for the TouchSmart as there are several models in the series? Thank you,

2 more replies
Answer Match 34.02%

How to take a screenshot using Hp TouchSmart Tm2 notebook PC

More replies
Answer Match 34.02%

when switched on can hear fan but screen blank

A:hp touchsmart 300 black screen

Hello, Thank you for posting in the HP Support forum. Welcome onboard! I am sorry for the issues you experience with your HP computer. Please, review these 2 HP official articles about such issues you experience now. Follow the appropriate steps that fit your case to attempt to fix the issue:>> http://support.hp.com/us-en/document/c03513214>> http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03561545-4  If you did try everything but nothing helped, I am afraid you will need to bring your computer (or ship it) to service - HP Authorized service center. If the computer is still under warranty, you will need to notify HP support first. If you are not sure where such a center is located, please contact HP support for assistance in finding one. Here is more info: >> http://support.hp.com/us-en/document/c00372730>> http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html  Please, provide feedback and let me know how it goes.

1 more replies
Answer Match 34.02%

I bout this iq500 second hand nearly a week ago, it already had installed windows 10( not sure what original was/is), ive reset back to factory settings and everytimes it goes to start back up... It does its loading thing then get to a blue screen that say's,Hello there!Lets get a few basic things out of the way.And then it has scroll down options well thing is the touchscreen wont let me click any option and the mouse and keyboard i have plugged in wont let me click options ... It was fine before i reset pc but it was a little slow hence reason for doing it... Ive been wrecking my brain and googling forums to try find out how to fix but i cant find info about my problem anywhere....Any help will be muchly appreciated!Many thanks

More replies