Tech Problem Aggregator

Tried to install Anniversary Update but it fails by error 0xC1990. Please help me?

Q: Tried to install Anniversary Update but it fails by error 0xC1990. Please help me?

After the second boot on the updating screen, the one with the spinning thing. When it gets to 83%, my screen just freezes out of nowhere. I tried switching off and back on again but it reverts back to my previous version of Win10. I tried getting Microsoft Support to help but their service wasn't all that great and I wasn't too happy with them. So I'm calling on you guys to help me out.

A: Tried to install Anniversary Update but it fails by error 0xC1990. Please help me?

Welcome!
Please consider joining us here at Windows Central as a valued member.
Here's a recent WC article that may help you: Windows 10 Anniversary Update common problems and how to fix them | Windows Central

1 more replies
Answer Match 86.1%

Hi
Checking update history shows no errors, just the update waiting to be installed.
Here's what happens: update goes all the way through to the end, then it hangs with a black screen with the little dots going round and will sit like that for as long as I'll let it. There's no hard drive activity during this period.
When I eventually get bored of waiting, I do a hard reboot and the previous version is reinstated.
Any ideas how to move on from this?

A:Win10 Anniversary Update fails, but no error code.

To update to anniversary update and face minimum bugs or none use media creation tool by Microsoft. By personal experience it is the best way to upgrade to anniversary update.
you could download the media creation tool here: http://forums.windowscentral.com/e?l...token=3lPiByUm
Here is a knowledge article on How to by Windows Central: Use the Microsoft media creation tool to force the Windows 10 Anniversary Update today | Windows Central
At present you could try disabling any Antivirus. Disconnect any external devices you don't need and retry installing.
If you need additional help or want to reply to this thread , learn how to join windows central.

1 more replies
Answer Match 86.1%

Windows 10 1511 will not update to 1607 by any method. Updates always complete to 100% then revert. Computer is a Dell Vostro 1720.

Background: The computer never appeared to update automatically, but there was never any error code. I tried to use the Windows 10 upgrade assistant. The upgrade would go through download and install to 100% but then restart back to version 1511 with no error message. Finally, I downloaded the 1607 iso, extracted it to my hard disk, and installed from there. Again the update went to 100% and then reverted back to 1511, but this time it gave the error message 0xC1900101 - 0x20017 "The installation failed in the SAFE_OS phase with an error during BOOT operation."

I have found several threads about this error, and it seems most likely that there is a driver conflict of some kind. I have looked at the setuperr.log from $WINDOWS.~BT/Sources/Panther/ directory but I do not see what is causing the error. Can anyone help with guidance on this?

setuperr.log text:

2016-09-21 19:53:52, Error CONX Windows::Compat::Appraiser::Utilities::SendRequest (1259): Failed to connect to the internet or send request: [12007].[gle=0x80072ee7]
2016-09-21 19:53:52, Error CONX Windows::Compat::Appraiser::Utilities::ResolveForwardLink (1319): Failed to send request using default proxy[gle=0x80072ee7]
2016-09-21 19:54:32, Error CONX Windows::Compat::Appraiser::Utilities::SendRequest (1259): Failed to connect to the internet or send request: [12007].... Read more

More replies
Answer Match 79.8%

We couldn't install Windows 10
0xC1900101 - 0x40017
We've set you PC back to where it was right before you started installing Windows 10
The installation failed in the SECOND_BOOT phase with an error during BOOT operation
What was tried: Connected straight to ethernet, Turned off wireless and Defender A/V, Removing the D/L files, D/L fresh from ISO file, launched install file, went through approx 50% and PC rebooted - nor stuck on black screen with swirling dots for OVER 4 hours with a brief HD access every couple of seconds.
Rebooted again -- still swirling dots on black screen. Tried again, same results.
Rebooted with F8 to get original Win 10 back.
Turned on "metered connection" option for WLAN to stop this update from happening. But now I cannot get and security updates for this machine.
Please suspend this D/L until fixed. Cannot afford to have no protection!

More replies
Answer Match 77.7%

I've downloaded the update for my laptop through windows update 3 times now. Each time it completes download, then restarts, configures updates, then gives me the notification: "We couldn't finish installing updates" Following that, a check of my update history shows no failed attempt or any reference to the update being downloaded. There is not at any stage an error code.
I have run the Windows Update Trouble Shooter with no result.
Any ideas will be welcome.

(I have a monthly isp download limit of 10 gb and with the speed i get it takes 4 hours to download the update so it has to be done after midnight so it doesn't count against the download limit )

A:Anniversary update won't install - no error code

Hi, download the ISO manually and create a bootable medium (which is useful in various circumstances).
(How - where- see the Tutorial section or search the net- not difficult).

That way you download once and can retry and have it available for other purposes. Also you avoid issues with Windows update.

From an admin command prompt
[Windows key + X, click command prompt (admin)]
chkdsk C: /F
Your PC will need to restart.
Make sure the result is clear or fixed.
Post back the result, which you can get after a restart as follows:
How do I see the results of a CHKDSK that ran on boot? - Ask Leo!

Disable any AV. Disconnect any devices you don't need. Uninstall any program that affects or modifies your GUI.

Do a clean boot then try the upgrade using the Win 10 DVD/USB.

If it fails again, you can have a look at the log:
Windows Update logs are now generated using ETW (Event Tracing for Windows).
Please run the Get-WindowsUpdateLog PowerShell command to convert ETW traces into a readable WindowsUpdate.log.

For more information, please visit http://go.microsoft.com/fwlink/?LinkId=518345

Good luck!

1 more replies
Answer Match 75.18%

Not the first and probably not the last:On various notebooks (s. below) the anniversary update fails with always same fault:0x8007042B - 0x4000DInstallation not successfull. Failues during MIGRATE_DATA in phase SECOND_BOOT.Drivers/BIOS are actual - as far as support assistant and MS update tells...Antivirus uninstall shows no effect, installation from scratch is possible, but not wanted due to reinstallation/reactivation of softwares.Dump analysis only shows ntkrnlmpa.exe fault. Affected notebook types:Elitebook 8570PElitebook 8570WElitebook 850 G1Elitebook 850 G2Probook 650 G2Probook 6550b (okay, old! :-))ZBook 15 U G2ZBook 15ZBook 15 G2 For we have to upgrade approx. 60 notebooks, would be nice to have a solution.MS and blogs tell me: driver problem :-( Thanks!! 

More replies
Answer Match 75.18%

I'm helping a friend with her Toshiba laptop. It came with Windows 7 and she had updated it to windows 10 but could not update to the anniversary version.

The anniversary update repeatedly failed for me too. So I did a sfc/scannow which found errors and fixed them. I rebooted, turned off the windows firewall, and tried the anniversary update again. This time it started installing, warning me it will restart several times. But after a while it just shutdown and stayed shutdown. So after a long wait I restarted manually. It booted up with a message saying it was restoring the "previous version" which turned out to be windows 10.
How should I proceed?
Thanks.

More replies
Answer Match 75.18%

Running Windows 7 Home Premium x64
Cannot update, attempting to upgrade to Win 7 professional. Discovered automatic updates were fried for some time and the system did not have SP1, which is apparently required for the upgrade.

I see similar threads, each seems to require advanced individual registry repair so starting my own - if there is a generic fix please reply with it and I can give it a shot. I have tried the normal tools to fix without change- see below.

Symptoms:
Windows updates fails with an error code 8007370B - Windows Update encountered an unknown error

I have run SURT several times successfully
I have run Fixit 50202, MicrosoftFixit.wu.LB.133286320513446086.5.1.Run,
Each returns 'Repair Windows Update components' and 'Windows Update components must be repaired'
All claim to have fixed the problem (no change, naturally)
Attempted to run SFC /scannow from an elevated prompt and it fails with 'Windows Resource Protection could not perform the requested operation'. Same behavior when attempted from Safe Boot.

Downloaded and attempted to install SP1 locally, both the all platforms version and the Win7 x64 version. Both fail with errors.

Ran the Norton remover tool and Macafee remover tool - think Norton came with the system but was never activated, ran the Macafee remover tool just to be sure.

Have renamed the Softwareupdate folder without any change.


Uploaded CBS logs
Download CBS.zip from Sendspace.com - send big files th... Read more

A:Win7 home update fails, error 8007370B - cannot update, install SP1.

See most of the repairs require the components file as well

Download COMPONENTS.zip from Sendspace.com - send big files the easy way

9 more replies
Answer Match 74.34%

My anniversary update failed near 80% complete showing: 0x80070017-0x2000c...failed in SAFE_OS phase...error APPLY_IMAGE operation. I suspect a hard drive problem as it makes noises. I have a new hard drive that I would like to replace the old one with. It is new (WD 1 TB WD10EZEX) and not formatted and has no OS on it, of course. How can I install the new drive and install Win 10 on it and then upgrade it to the Anniv Edition? I know how to physically put the drive in and remove the old, but don't know what to do after that. I have my original Win 10 Pro ISO on cd and a Macrium bootable rescue disk on cd to work with. What do you suggest?

More replies
Answer Match 73.5%

I am running Windows 10 Pro 64bit  on my Probook 4520S. When checking for update Windows found the update to the Anniversary Update. But it fails to install.During installation of the update the laptop boots a couple of times (which is normal) but at some point during one of the reboots, the machine hangs. Completely blank screen. So, I don't get an error code on screen. Only thing I can do at that time is turning off/back on the laptop, after that the laptop turns back on and Windows is automatically starting the rollback of the Anniversary update. Leaving me with 1511 version.Already tried following (a couple of times):disable antivirus, clean boot (no addititional services loaded at boot). Manually forcing the update by downloading it from here: https://support.microsoft.com/nl-nl/help/12387/windows-10-update-history?ocid=update_setting_client Same issue is consequently occuring. Update starts, machine is rebooted at some point during the upgrade process, and hangs during the reboot with blank screen and no responsive keyboard. Is there any other solution you can think of which helps me to update Windows 10 with the Anniversary Update? Thanks,Mathijs 

More replies
Answer Match 72.66%

Perhaps someone can tell me what went wrong here.

I have a bottom-rung Dell Inspiron 330s that I inherited from a family member. It shipped with Win7 Home, and while it was eligible I had updated it to Win10 1511. Very little if anything on it ... pretty much a vanilla system. Not even third-party drivers. Every few months I'd turn it on to get updates. MBR hard disk, no UEFI.

Since it's unused at present I decided to try the Anniversary Update as a practice run. Booted the machine to 1511 as usual, everything looked fine. I did the update the same way I had done 1511 on this and perhaps a dozen other machines - copied the ISO to a temp directory on the C: drive, mounted it, and run setup.exe

The first phase of the setup ran to perhaps ~55% (I had looked away for a few minutes). When I looked again, the 1511 desktop was back with a little white alert box saying that the update had failed. No error message or reason.

I checked the update history and there was no error related to this attempt. Ran the Windows Update troubleshooter, which said it had found and repaired a problem with the Windows Update service. Then a message came on the screen telling me that the drive was damaged, click here to reboot and repair.

Despite the chorus of characters dancing in front of me and yelling "***DON'T DO IT!!!***", I "clicked here" and the machine tried to reboot and failed with a message that there is no bootable OS. Tried booting a real 1607 install DVD and it j... Read more

More replies
Answer Match 72.66%

My new Logitech HD720 webcam ( 10 months old) that uses USB and sits on top of my laptop worked great under windows 10 .. but since the July 29th / 30th windows 10 anniversary upgrade my web cam doesn't work at all ..

..it recognizes the hardware but won't display an image . .I have reinstalled the Logitech software but it still fails to work ..

I'm sure I read somewhere that this is a legitimate issue and unless you 'tweak the registry' the webcam won't work until windows 10 does another future upgrade to fix this problem ...

Ideas ??

A:Since win 10 anniversary update My Logitech web camera fails to work.

It's a known problem with the AU and you should be able to fix it using this guide

Fix webcam doesnt work in Windows 10 Anniversary Update

3 more replies
Answer Match 72.66%

Used the Windows Media Creation tool for the Anniversary Update
All went well, but in the end a simple "Windows 10 installation has failed"
No reason, I just returned to my 10586.545 desktop.

Frankly as I expect such things to happen, I always create a Windows image right before
starting such 'bigger' upgrades.
Restored the image so to make sure there is nothing left there from the failed 1607 upgrade
there that might cause conflicts.

Maybe, one day, MS has a fix, or I may try to do a fresh install, sometime in future.

Right now, 10586.545 is running fine.
Personally I don't have the time (read: interest) to start off spending hours on trying to
find possible solutions / workarounds.

=

=

More replies
Answer Match 72.66%

I have been running Windows 10 on a pretty plain Dell Inspiron. Today it asked if I wanted to install an update so I let it. After almost an hour of showing a progress meter and seeming to finish that phase, it rebooted and proceeded to seem to install but then put up a message about "install ?? this could take a while" so I walked away and when I came back after an hour I had a blank screen and just a rotating busy symbol. I am assuming this is the "anniversary" update since no other updates have ever taken this long or acted this way, except for the original Windows 10 install/update itself.

So after waiting 6 hours, I powered it off and back on and as it came up it indicated "trying to fix the install" then briefly brought up the "Dell label screen" and the usual box picture and went back to the blank screen with a busy rotating symbol.

Can someone point to a site that indicates how to get around this and restore back to where it was? Right now I have a totally unusable PC and do not know how to proceed. Thanks

By the way is it labeled "anniversary update"???

More replies
Answer Match 72.24%

Windows 10 has been running fine for some time, but attempt to update to Anniversary fails. The update runs fine until the point after restart where it states "The machine will restart several times"; soon into that sequence when  attempting a restart, the machine switches itself off instead. When I then switch it back on manually, the update is lost and the system resets itself to the previous Windows version.A Microsoft technician worked for hours before concluding that I would have to do a full, clean WIndows 10 installation, after which all files and applications would be lost and needed to be reinstalled. I have been wondering if the faulty restart behaviour is related to the BIOS somehow, and I have had it reinstalled from HPs site with no change. So, my questions areCan BIOS be the cause? Btw, I have turned the fast restart option (under power schemes) off.I note that I got a "legacy" BIOS installed. Is UEFI available for this laptop, and would that make a difference?If I do install UEFI, will Windows 10 and applications run as before or could other issues arise?

More replies
Answer Match 71.82%

Windows Update installation of Win7 SP1 (updating existing version of 6.1.7600.16385) reports the install as successful until reboot, then says successful and unsuccessful in the same dialog box. Error ID is 80242016. Subsequent run of windows update shows SP1 not installed. Problem repeats, even after following all steps in troubleshooting, including running the recommended hot fix for KB 947821, troubleshooting, & turning off anti-virus. Also, the windows update troubleshooter identifies my system as AMD64 architecture even though it is Intel I7 2600K. System infomation id's the CPU correctly. Any suggestions? System MB is ASUS P8P67 PRO, 16GB memory, AMD Radeon HD 6800 Series video card.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, 64 bit
Processor: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 8
RAM: 16360 Mb
Graphics Card: AMD Radeon HD 6800 Series, 1024 Mb
Hard Drives: C: Total - 1907626 MB, Free - 1744588 MB;
Motherboard: ASUSTeK COMPUTER INC., P8P67 PRO
Antivirus: Norton Internet Security, Updated and Enabled
 

A:Windows update install of Win 7 SP1 fails with error 80242016

Not the same symptoms, but check out this sticky thread to see if anything there works for you.
 

1 more replies
Answer Match 71.82%

So I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.
But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it. (im a kinda noob on it anyways)
Any help would be appreciated!

P.S. I just reinstalled Windows and tried installing the updates again, but same thing. I cannot install any update at all.

If you want, you can add me on Skype: septurae

A:Windows 8 fails to install EVERY update, error 0x800f0922

have you tried to run
Code:
chkdsk c: /f /r /x


? I had Windows Updates failing recently and ran chkdsk by booting from the Installation disk (so that the OS was not running and the HD could be unmounted). It found bad sectors and fixed them and the updates installed perfectly fine after that.

1 more replies
Answer Match 70.98%

Hi, this particular update has refused to install correctly since the 14th. Other updates have installed with no issue. Ran SURT and tried to manually install it from direct download.

Any help much appreciated.

A:Error code 80070490, Update 2790113 fails to install

Hi zatoichi,

As you've correctly isolated, Windows in your system has failed to install an update on numerous occasions:

Code:
2013-02-28 17:06:12, Info CBS Failed to get session package state for package: Package_3_for_KB2564958~31bf3856ad364e35~amd64~~6.1.1.1 [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
Though unlikely, you may still try resetting the 'Windows Components' to see if that helps: How do I reset Windows Update components?

If the issue persists, please try a manual install: http://www.microsoft.com/en-us/downl...ng=en&id=27653

You may also refer to the following 'Microsoft Article' that recommends 'Windows Repair' in this case, if 'System Update Readiness Tool' fails to fix it: Windows Update error 80070490

Hope this helps.

5 more replies
Answer Match 70.98%

This is on a friends Lenovo B520 running Windows Home Premium 64 bit.

I've found that this PC has been failing to install updates for some time now. It's still running IE9 - I can see previous failed attempts at installing IE10 and now it's failing to install IE11 in the Windows update control panel.

I've run the SURT and sfc /scannow

The CHECKSUR.log lists 127 corrupt MUM and Cat files but I'm unable to locate good versions of these to start attempting repairs. I've attached just the log files from the CBS folder as including the CABs meant the attachment was too large.

Thanks for any help you can give.

logfiles.zip

A:Windows update fails to install IE11, error 9C57

Here's the summary from the CheckSUR log...

Code:
Summary:
Seconds executed: 4517
Found 254 errors
CBS MUM Corrupt Total count: 127
CBS Catalog Corrupt Total count: 127
Luckily, they all appear to relate to one update - or I'd have been reluctant to attempt anything short of a repair install.

The SFC results appear to have rolled off into the Persist files - please post the two latest CBSPersist files so I can take a look at them.

I'll post a fix for these file later (maybe tomorrow, though)

9 more replies
Answer Match 70.98%

Hi.

Th problem is that all windows updates are failed to install (around 27 updates) since the 17/May.
I tried everything from deleting temporary files, doing malware check, hard disk check for errors, still could not solve it.

Any ideas?

A:Windows update fails to install updates (Error 66A, 8007006E)

Troubleshoot common installation issues in Windows Update, Microsoft Update, and Windows Server Update Services would seem to apply here.
Run the Fixit, and see if it helps - make a detailed not of any errors produced along the way

9 more replies
Answer Match 70.98%

So I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.

But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got
the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it. (im a kinda noob on it anyways)

Any help would be appreciated!

A:Windows 8 fails to install EVERY update, error code 0x800f0922

Hi Septura,
After checking the log you provided, I find two error messages.
1. failed to set task enabled status., error = 0x80071A91
2. WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
Please use the following command to fix your issue.
DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess
Note: Replace the C:\RepairSource\Windows placeholder with the location of your repair source.
Best regards,
Fangzhou CHEN

8 more replies
Answer Match 70.14%

Hi there,

I'm having an issue with a laptop running Windows 7 Home x64 SP1. It has failed to install Windows Update Agent 7.6.7600.320 and keeps trying every time I try to run updates.

I've downloaded the installer and tried to run it manually, but that gives me the error 0x80070002

I've attached my CBS log from the last time I attempted the install. Any help will be much appreciated!

A:Windows Update Agent install fails, Error Code 800F081F

The v320 update installer isn't commonly available (unless you know where to look) - where did you attempt to download it from?

Here's the error-sequence from your log...

Code:
2014-09-10 23:15:06, Info CBS Exec: Staging Package: WUClient-SelfUpdate-Core-UIComp~31bf3856ad364e35~amd64~pt-PT~7.6.7600.256, Update: UI, PinDeployment: amd64_microsoft-windows-w..oyment-languagepack_31bf3856ad364e35_7.6.7600.256_pt-pt_76bae7f7dbc23d63
2014-09-10 23:15:06, Info CBS Calling client to resolve source, cannot find file 'wuaueng.dll.mui' at path: \\?\C:\Windows\Servicing\Packages\amd64_microsoft-windows-w..ient-core.resources_31bf3856ad364e35_7.6.7600.256_zh-cn_8aefebe76d4c7c4f\wuaueng.dll.mui
2014-09-10 23:15:06, Error CBS Exec: Failed to pre-stage package: WUClient-SelfUpdate-Core-AdmComp~31bf3856ad364e35~amd64~pt-PT~7.6.7600.320, file: wuaueng.dll.mui, source: \\?\C:\Windows\Servicing\Packages\amd64_microsoft-windows-w..ient-core.resources_31bf3856ad364e35_7.6.7600.256_zh-cn_8aefebe76d4c7c4f\wuaueng.dll.mui, sandbox: (null) [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10 23:15:06, Info CBS Failed to gather all required files. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10 23:15:06, Info CBS Failed to gather all missing files for package: WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320 [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10... Read more

4 more replies
Answer Match 70.14%

Very troubling experiences lately. Can't download any Windows Updates, and I get a NSIS Error when trying to download any kind of software from the internet, from valid sites like Kaspersky, Bit Defender, or gaming sofware from legit companies. McAfee fails to Update new virus definitions. I don't know what to do. This is a 7 month old laptop. Windows 7 64 Bit. Here's the Hijack This Log


Code:
Logfile of Trend Micro HijackThis v2.0.3 (BETA)
Scan saved at 2:06:43 AM, on 2/1/2013
Platform: Unknown Windows (WinNT 6.01.3505 SP1)
MSIE: Internet Explorer v9.00 (9.00.8112.16450)
Boot mode: Normal
Running processes:
C:\Program Files (x86)\Intel\Intel(R) USB 3.0 eXtensible Host Controller Driver\Application\iusb3mon.exe
C:\Program Files (x86)\Hewlett-Packard\HP On Screen Display\HPOSD.exe
C:\Program Files (x86)\Hewlett-Packard\HP Quick Launch\HPMSGSVC.exe
C:\Program Files (x86)\CyberLink\PowerDVD10\PDVD10Serv.exe
C:\Program Files (x86)\CyberLink\Shared files\brs.exe
C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe
C:\Program Files (x86)\CyberLink\YouCam\YCMMirage.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_11_5_502_146_ActiveX.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Microsoft Office\Office14\OUTLOOK.EXE... Read more

A:Windows Update Fails To Install Updates, NSIS Error, Can't Download

  
Quote: Originally Posted by atmywitsend


Very troubling experiences lately. Can't download any Windows Updates, and I get a NSIS Error when trying to download any kind of software from the internet, from valid sites like Kaspersky, Bit Defender, or gaming sofware from legit companies. McAfee fails to Update new virus definitions. I don't know what to do. This is a 7 month old laptop. Windows 7 64 Bit. Here's the Hijack This Log


Code:
Logfile of Trend Micro HijackThis v2.0.3 (BETA)
Scan saved at 2:06:43 AM, on 2/1/2013
Platform: Unknown Windows (WinNT 6.01.3505 SP1)
MSIE: Internet Explorer v9.00 (9.00.8112.16450)
Boot mode: Normal
Running processes:
C:\Program Files (x86)\Intel\Intel(R) USB 3.0 eXtensible Host Controller Driver\Application\iusb3mon.exe
C:\Program Files (x86)\Hewlett-Packard\HP On Screen Display\HPOSD.exe
C:\Program Files (x86)\Hewlett-Packard\HP Quick Launch\HPMSGSVC.exe
C:\Program Files (x86)\CyberLink\PowerDVD10\PDVD10Serv.exe
C:\Program Files (x86)\CyberLink\Shared files\brs.exe
C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe
C:\Program Files (x86)\CyberLink\YouCam\YCMMirage.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_11_5_502_146_ActiveX.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explo... Read more

5 more replies
Answer Match 70.14%

Hello. I have tried my best to do everything recommended here to solve the issue of failed installments of windows updates:

Fix: Windows Updates fail to install in Windows 7 | 8

Obviously, I haven't been successful. I am not very good with computers, so I would appreciate your patience as you help me with this problem.

Thank you for your help.

A:Windows Update Fails to Install: error codes 800B0100 and 9C47

Attachment 286200

Here is the CBS zip.

9 more replies
Answer Match 69.3%

I'm simply attempting to run update on my Windows 7 machine. Update will not run, downloading and running the SP1 update fails, downloading and running the Update Readiness Tool fails, trying to launch a troubleshooter fails. I ran sfc and have attached the log along with all the error codes screenshots. I have no idea how to proceed from here other than to drop this machine off at the nearest recycling center.

A:update fails, SP1 install fails, troubleshooter fails

Looks to me like you're having problems accessing the COMONENTS registry hive - although I would have thought that would also make a SFC scan fail.

I suspect I know what the problem is - let's see if a different tool can expose it...
I need to see a full copy of the report produced by the MGADiag tool
(download and save to desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once saved, run the tool.
Click on the Continue button, which will produce the report.
To copy the report to your response, click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your response.x

3 more replies
Answer Match 67.2%

Greetings fellow Windows enthusiasts,

I was asked to update our Windows 2008 R2 server from IE 10 to IE11, and it will not install properly.  I have looked up several solutions to this issue, so far nothing has worked.

I disabled McAfee HBSS in safe mode, restarted the PC and tried to run Windows Update managed by a WSUS server.  The update gets approved and pushed out to the 2008 R2 server.  It downloads IE11, tries to install, then fails/errors-out at the last
second.   I have tried this a few times, rebooted and either get error code 9C47 or 9C49.  


Some of the fixes I have tried:


I turned of internet connectivity and the anti-virus, that did not workI tried the Windows Update repair tool, that did not work  I tried the Windows System Readiness tool, that did not work   I tried to scan the system files for errors with sfc /scannow
and that did not work  I tried installing the other updates first, restarting and it still fails I removed the server from WSUS and re-added it and it will not update   I tried the stand-alone IE11 installer, and it fails at the very last step and then gives me an error with a link to troubleshoot IE installations   I have uninstalled IE10, and now am totally stuck with the absolutely horrible experience of IE9 SURT returns no errorsSFC returns no errors
Technical information:

I have checked the Windows Update log file, the last errors that I found ... Read more

More replies
Answer Match 66.78%

I am downloading the update manually. Have others had the same issue with windows update not showing the update?

I'm not sure my WU is working because of this.

A:Windows Update does not download and install the anniversary update.

Originally Posted by Alicia J


I am downloading the update manually. Have others had the same issue with windows update not showing the update?

I'm not sure my WU is working because of this.



Have you tried this - https://support.microsoft.com/en-gb/...setting_client

Recommended today by another forum member - may just work

more replies
Answer Match 65.52%

The Win 10 AU fails to install with error:0x80070002-0x20009.I have a cloned SSD and use the old HDD for data as Drive D:I've tried the standard update and also the MediaCreationTool.exe, I have also triedto install with the HDD disabled. Any help ?




P50 20ENCTO1WW | 6700HQ | 32 GB RAM |M1000M |512 SSD

More replies
Answer Match 65.52%

I tried to update using the usual method, as the new update was present. I tried twice, and it failed twice. 2nd time it became clear that the Razer Synapse software (recent purchase of a discount keyboard) was causing the issue. So, I've uninstalled that. Fine, so now I go to hit the update button again, but Windows tells me it's up to date? I know for a fact it isn't, because it just told me it could not install the update and reverted to the previous version. What gives?
So, I can see it has downloaded the update to the '$WINDOWS.~BT' folder, but it will not trigger by running the 'setup.exe' file. My question is, how do I proceed now? How do I trigger the update I've downloaded to install, when Windows seems to have decided it's already installed it?
Ruddy Windows 10...

A:Anniversary Update Install - Help!

Originally Posted by AndyCalling I tried to update using the usual method, as the new update was present. I tried twice, and it failed twice. 2nd time it became clear that the Razer Synapse software (recent purchase of a discount keyboard) was causing the issue. So, I've uninstalled that. Fine, so now I go to hit the update button again, but Windows tells me it's up to date? I know for a fact it isn't, because it just told me it could not install the update and reverted to the previous version. What gives?
So, I can see it has downloaded the update to the '$WINDOWS.~BT' folder, but it will not trigger by running the 'setup.exe' file. My question is, how do I proceed now? How do I trigger the update I've downloaded to install, when Windows seems to have decided it's already installed it?
Ruddy Windows 10... try this tool: https://support.microsoft.com/en-us/...troubleshooter

1 more replies
Answer Match 65.1%

program installs but system won't reboot

More replies
Answer Match 65.1%

GDRDU: Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3176938)
Failed to install.
Installation went up to 95% and then stuck on that for some time and then the computer restarted and said reverting to previous version.

More replies
Answer Match 65.1%

Product Name: HP Envy 15-j122txPre-installed OS: Windows 8.1 New clean OS installation : Windows 10 pro  I have bought Samsung 850 pro 1 TB SSd  for my hp envy notebook.I am going to replace an old 1TB HHD by a new 1TB SSD Samsung 850 EVO on my HP Envy Touchsmart 15 j122TX. how to installing the SSD on my HP plus clean installation of Windows 10 pro, setting up the OS to ensure a smooth performance? Please give me step by step instructions as I am un-experienced. Thank you for your support.  MY notebook has 24 msata SSD install can I use msata with my new SSD after the clean installation of Windows 10 pro?    

A:install windows 10 anniversary update on SSD

Here is the Service Manual: Manual Pages 41-47 show removal of the service bay door and replacement of the hard drive. Just install the SSD in place of the hard drive. You can remove the mSSD drive. It is not useful with a main SSD drive. It was designed only to speed up a regular mechanical drive.  Do you have a Windows 10 installation disk? You can download an image file and create a Windows 10 DVD or thumb drive installation media from the Media Creation Tool Microsoft webpage.  Post back so I can see if you are with us here. We can take this a bit at a time rather than my writing War and Peace and you not understanding something. 

1 more replies
Answer Match 65.1%

When trying to do the update I am told that my version is 10586 and that I need to be at 14393. I tell it to go ahead and do the update and it gets to 2% and then it tells me something went wrong and gives me error code 0x80070005.

A:Windows 10 anniversary update won't install

I know this is odd, but I saw this on another site and it has worked for me on 2 computers so far. Click on the anniversary update, let it check your system and then let it download the update. As soon as it starts to update, disconnect the wireless or LAN. It was able to update after this. Once it got past this section, I connected to the wireless again. About to do this with my 3rd computer. None were able to update before.

2 more replies
Answer Match 65.1%

how to install FM radio after Anniversary update is installed ?

More replies
Answer Match 65.1%

Hello all,

Need some help... I had Windows 7 Ultimate on my pc then, I got the free copy of Windows 10 per Microsoft.
My system now is Windows 10 Pro version 1511 OS build (10586.633)
The anniversary update fails every time..... things that I have tried:
completely pause (stop) Norton Anti-virus
completely pause (stop) Malwarebytes
Clean boot

I build this pc about 5 yrs ago, never had a problem; here are the specs:

Intel i7 CPU 930 @ 3.0 ghz
12gb DDR3
Windows 64 bit
256 gb SSD drive for OS
2 tb drive for data

Any help will be appreciated;

Thanks

More replies
Answer Match 64.26%

I've having trouble installing the Windows 10 Anniversary Update.

The installation of the update seems to get to about 70% complete, then I get a BSOD saying "kernel security check failure".

Then the update system automatically rolls back my Windows installation to the pre-Anniversary Update version.

Not sure which driver is causing the problem. Hopefully, the attached logs will help to narrow down the problem.

Thanks for any help.

More replies
Answer Match 64.26%

I am unable to install the Windows 10 Anniversary Update, keeps failing after second restart (at around 75%).

Machine is a relatively recent custom build, a little over 12 months old: Gigabyte B85M-HD3 (rev 2) mobo, i5-4460 CPU, Geforce GT 740 2GB GPU, 8GB RAM, Samsung 850 EVO 250GB SSD. Been running Windows 10 Pro 64-bit (1511) with no problems. sfc /scannow gives a clean bill of health. No apparent issues with drivers, Device Manager shows all good.

Tried installing via Windows Update and also via the downloaded Windows 10 Upgrade executable... same result. Everything goes well up until the second restart and then the start screen just hangs with the little circle of dots twiddling around indefinitely - up to 8 hours - and no hard drive activity whatsoever.

The only USB devices connected are my keyboard and mouse. I've tried installing in Clean Boot mode with all startup items and non-Microsoft services disabled... no difference. Tried increasing the size of the System Reserved partition from 350MB to 500MB... no difference. Tried installing while disconnected from the internet... no difference.

Downloaded the Windows 10 1607 ISO (which includes the Anniversary Update) and tried an upgrade install in Clean Boot mode, both with and without internet connection - installation froze at exactly the same place, after the second restart. Received the following error message upon recovering to previous version:


No idea where to go from here. Clean install is definitely... Read more

More replies
Answer Match 64.26%

Trying to install the KB3185614 (anniversary 1607) update, but getting the 'couldn't complete the updates undoing changes' messages after 100%.  System log shows a 0x8024200D error code. Tried.... 1. uninstalling all anti-virus apps, inc luding cleanup tools afterwards.2. deleting the SoftwareDistribution folder contents.3. downloading the update manually from the MS catalog site and installing from that4. doing an upgrade install using the latest 1607 iso on a dvd from within Windows Anyhting else I could try before I go for the last resort of a clean install using said dvd?. thanksjoe

More replies
Answer Match 64.26%

My first impressions:

Pros:
Seems a bit faster overall - I did a complete system image backup in 00:02:09 (previously took 00:02:35)
OS install uses less space (at least for my installation)
Event viewer shows no new instances (I had two known issues before and they are still there)
Reapplied many of Brinks tutorial suggestions and most of them worked... except this one:

gpedit management notice is missing (second screen shot) so I can't say for sure if it will work (or not).

Cons:
Win10BGChanger1.2.1 still doesn't work (as expected)
Sound removed from notifications by default (not a con for me though)

All in all, working well so far (for me).

More replies
Answer Match 64.26%

JOHN_COMPUTER-07_08_2016_191929_84.zipI'm having trouble installing the Windows 10 Anniversary Update.

The installation of the update seems to get to about 75% complete, then I get a BSOD.

Then the update system automatically rolls back my Windows installation to the pre-Anniversary Update version.

Not sure what is causing the problem.

Using dm_log_collector produces an empty zip file which is attached.

Thanks for any help.

If any other files needed please state and will attach.

More replies
Answer Match 64.26%

I have an xps 8700 desktop.
Will windows find most of the drivers?
If I enter my service tag and go to drivers will all the drivers that I need be there?
(I had an old Dell with Windows XP. I did a clean install on it once. I think there was one device that was listed as unknown. I put in the dell driver disk and it install most of the missing drivers I needed, as I recall. But you no longer get disks with Dell computers.)
Is there a place to download a drivers disk?
If I open Macrium Reflex, it shows that there are 5 partitions. One is the c: drive, one is PBR Image, one is wintools (I think). What are the other 2? They must be Dell partitions as I never created any partitions.
I looked up the model number of my harddrive and it appears to be a standard hard drive. Somebody said that there could be a small SSD that is used to help the other drive boot faster. If there was such a drive, wouldn't I see if I opened Optimizer? Or in Macrium Reflect?
The model number of my harddrive is WD10EZEX

A:If I have to do a clean install to Windows 10 Anniversary update...

Macrium just finished the backup, so I just checked and there are 7 partions
1. ESP
2.DIAGS
3. None - unformatted 128/128 (must be a windows thing as my second drive that I added has this too)
4. Winretools
5. OS (C)
6. None- primary 334.2/450
7. PBR Image

3 more replies
Answer Match 64.26%

My first impressions:

Pros:
Seems a bit faster overall - I did a complete system image backup in 00:02:09 (previously took 00:02:35)
OS install uses less space (at least for my installation)
Event viewer shows no new instances (I had two known issues before and they are still there)
Reapplied many of Brinks tutorial suggestions and most of them worked... except this one:

gpedit management notice is missing (second screen shot) so I can't say for sure if it will work (or not).

Cons:
Win10BGChanger1.2.1 still doesn't work (as expected)
Sound removed from notifications by default (not a con for me though)
Installed default audio playback to my headset - changed to speakers
All in all, working well so far (for me).

A:Anniversary Update - Clean Install - First Impressions

I like everything except the removal of being able to skip the lock screen on wake from resume

more replies
Answer Match 64.26%

First of all, I'm coming from Windows 7. I'm one that was able to upgrade to Windows 10 for free.

Am I able to perform a clean install of Windows 10 using the same license I currently have on Windows 10? How would I obtain my current key, then? Is it s imply the Product ID listed under Control Panel>System ?

Can I download a copy of the installation media which already contains the AU update?

How would I install Windows 10 onto a M.2 drive? Is it as easy as picking the hard drive to install Windows on during setup?

A:How do I clean install Windows 10 Anniversary Update?

You could just use "reset my pc".

Alternatively, create bootable usb stick or dvd

Windows 10

Boot from it, choose custom install, delete all partitions on drive you want to use (backup data first of course), and skip key entry as not needed as you have already upgraded.

1 more replies
Answer Match 64.26%

Running Windows 10 1511 on a 500gb SSD - all works 100% Have installed 1607 twice now works OK and seems Ok for a few hours and then I find all sorts of problem occouring - programs will not run, even Ctrl/Alt/Delete does not work and so on and I end up going back to 1511 wg#hich I have kept a copy of.
At present I have decided to abandon 1607 and continue with1511 - will this still be supported with security updates?
Martin

More replies
Answer Match 63.42%

This box came with windows 7 64 bit Home OS.  I recently upgraded to the windows 10 OS in order to take advantage of the latest OS.  Around August the windows 10 anniverary update became available but upon attempting multiple times it have failed.  I receive a 0xc1900200 error and a reference to the system reserved partition not being big enough.  I don't seem to see a partition called System Reserved partition but have tried to expande what looks like a 100 MB SRP, using Partition Magic.  It doesn't let me change this 100 MB partition.  The PC runs fine but because of MS auto updates, which I need to keep other MS software up to date, I get regular failures of the Anniversary update release.

More replies
Answer Match 63.42%

Hello to everyone.
i have sucessfully installed the update Anniversary of windows 10 x32 to my tablet what i have is an nextbook of 7inches which has 16GB of storage and just if try to update will get the message of not enough space to do the update, in this poost will detail how to do the install without die on the attempt. the time that takes in do the update is about 4-6 hours due the low specs of this tablet, can also be for any tablet that has 16GB storage.
Materials to use list
an empty micro SD card of 32-64GB of capacity, i used an micro sd card of 64GB for this procedure.
i say empty because i have tried use an card with files inside and the tool media creator erased all my files so i do emphasis in this
preparation of the SD card memory
in an card reader in another computer download from the Media tool creator the version of windows 10 that your computer use, and use the SD card to store the version of windows from media tool.
i know many tablets has OTG capabilities but have to keep in mind the following.
if your tablet gets the battery charged via an micro USB connector, then you must use the method of do the upgrade by Micro SD card, since the installation will take 3-6 hours so need keep the tablet powered and plugged to the wall socket all the time , if ran the set up by battery will get no power in no time and will brick your tablet forever, or in the best of the chances will get back automatically to the wind... Read more

More replies
Answer Match 63.42%

So this is very frustrating... I'm trying to install the anniversary update, and used the upgrade assistant. But when it restarts, it flashes for just a second the update screen, then shuts off and restarts again and loads without the update...

Any idea what I did wrong? I even reset the PC and it's still causing issues...

Any help would be appreciated.

More replies
Answer Match 63.42%

I have a problem after installing the Anniversary Update of Windows 10. This post concerns the process which involves a clean re-install of Windows 10 by the method which includes downloading and running Microsoft's Media Creation Tool, choosing "Create Media for another PC". This downloads an ISO of Windows which, when put on a USB stick, can be used to boot the computer and clean-install Windows 10 (no license key required because Windows 10 was already running, although I have my license key.) I am told that this produces a "very clean" install which would clear any glitches in the previous install. Programs would need to be re-installed.

My question please: assuming that the Media Creation Tool will be downloaded after the Anniversary Update was installed, will it produce a Windows 10 + Anniversary Update version ?

Thanks for any help.

PS: I wasn't able to create a Macrium System Image which would include the Anniversary Upgrade because my problem occurred immediately after the Update. If you are interested in what that problem is, go to:

http://www.tenforums.com/installation-setup/58571-anniversary-update-search-not-working-properly.html

A:Clean Install of Windows 10 including Anniversary Update

I used the MCT tool this morning and i can assure you its the 14393 build. You will find some windows updates waiting at the end of it.

1 more replies
Answer Match 63.42%

I have windows 10 installed on Lumia 1020 with no problems very happy with it just wanted to know if anniversary update could be installed thank you.

A:can windows 10 anniversary update install on lumia 1020

Originally Posted by Windows Central Question I have windows 10 installed on Lumia 1020 with no problems very happy with it just wanted to know if anniversary update could be installed thank you. It can: [Guide] Installing Redstone on Unsupported devices (X2X Series)
Your phone already got Windows 10 last Threshold, so it could do that in the shortest way (see forum: )
" Windows 10 Mobile 1) Any Nokia Lumia X2X Series (with and without SD card) running the below OS versions 10586.10710586.545
Users who're on these versions can get Redstone in a much simpler way. You can stop here. 2) Files needed a) InteropTools v 1.8 - Here b) DHTUpgrade Advisor - Here 3) Go to developer options and enable developer mode. After that, a) Copy the appx files from "Dependencies" and "InteropTools_Beta_1.8_0.0.160.0_arm.appxbundle" to your phone and install them. b) Now open InteropTools (beta) >> goto "INTEROP UNLOCK" section >> toggle on the Restore NDTKSvc. 4) Now similarly install the files from "DHTUpgrade Advisor" and "Dependecies" via file explorer. a) After installing, Open DHTUpgrade Advisor, select backup and then choose "Allow Update 512MB devices" or "Allow Update" b) Crosscheck if your device info details are changed or not in the "About" tab. If not, reboot your phone. 4) Go to windows update and check for updates. a) If the update isn't offered, then install &q... Read more

2 more replies
Answer Match 63.42%

Windows 10 Anniversary Update Might Hide Partitions After Install

One of the issues experienced by users after installing the Windows 10 Anniversary Update concerns partitions, as many of those who upgraded their computers reported that a number of partitions disappeared from File Explorer.

Furthermore, all partitions show up as RAW in Disk Management, which makes most people believe that all their data has been removed and nothing can be recovered.

Microsoft, however, claims that this is just a bug discovered in the Windows 10 Anniversary Update install system, and while no files are lost, it?s critical for users not to try to recover anything with third-party apps because this could lead to completely breaking down the partitions and removal of data.

?Microsoft is aware of this issue and is working on a solution to be released through Windows Update. Any data you have stored on the affected partition is still there. We recommend that you not try to recover or otherwise write data to the affected partition, nor should you format the partition,? the company says.




You can also downgrade in the meantime
Microsoft?s Sharath Srinivasa goes on to explain that a patch will be released to users when it?s available and states that users who do not want to wait for it can always downgrade to their previous Windows version. Partitions should be then just as you created them, with all files once again accessible.

For the moments, there?s still no timing on wh... Read more

More replies
Answer Match 63%

I have tried multiple times times to install the Windows 10 Pro, Anniversary Update to my desktop computer, a Dell Inspiron 560. Every time, the result has been a computer that will not start-up, ie. Windows does not appear to load/run. I have tried the WURepair tool and tried to repair the System Registry HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Windows NT>ProfileList, all to no avail. I have had to restore my system with an previous Image to get it operational again. Has anybody else had this problem and been able to come up with an answer?

A:Trouble trying to install Windows 10 Anniversary Update, version 1607

Hello JRAllen72653 Welcome to the Ten Forums!

One advice I can provide here would be to try a different method for either update by upgrade or planned clean install which doesn't seem to be what you have been looking for. When the Redstone 1 update didn't even arrive here for 3 separate desktops as well as a recently new laptop where 10 came already on not seeing the update still lead to fail of the MC Tool to see the immediate online upgrade take place or create the usb media needed.

Twin solutions were then sought! The first in order to see all machines updated was to download the "windows.iso" by way of the MC Tool which equals both the 32bit and 64bit flavors for both the Home and Pro editions. We call that a "4 in 1" type of download that covers everyone.

The second item on the agenda did opt to use a 3rd party program not the Windows option to mount the iso downloaded onto each machine or run from a flash drive where the setup.exe main executable would be manually started to watch each upgrade install take place. Once all systems were set which included one desktop only lately being upgraded from 7 Home Premium to 10 Home and then still waiting for the update to go on before return to owner was to visit a MS download iso type page to grab both the 32bit and 64bit smaller Dual Edition iso downloads to keep onhand.

For a final fix to all older already made up flash drives for the Threshold 2 update last November as well as for Windows Insider P... Read more

3 more replies
Answer Match 63%

Hello,I recently purchased a new 2016 model Spectre x360 (PN X7V20UA). It came running Windows 10 1511, and I would like it to be running 1607 (Anniversary Update). However, the update to 1607 is not being offered inside of Windows Update. I've installed everything that was available, include today's November patch releases, to no avail. Windows Update shows "Your device is up to date." This link http://arstechnica.com/gadgets/2016/10/hps-new-spectre-x360-is-probably-the-best-pc-laptop-around/ says that the 1607 update is being blocked on this model temporarily due to driver compatability issues. I tried to get confirmation from HP twitter support about if this was true or not, but wasn't able to get much help. Can someone please confim this?

More replies
Answer Match 63%

Hi all,

Wondering if anyone else has experienced an icon display issue on their start menu with the 1607 update?

I have just clean installed (and fully updated) the 1607 Anniversary Update on 2 PC's and both are experiencing an identical issue with their start menu. The problem whilst seemingly minor is especially annoying given that I have performed the updates for some friends and it is a matter of pride to me that I hand over any such systems in a perfect state.

The Start Menu program list (A - Z list) as well as the "most used" and "recently added" lists contain icon tiles for the installed programs. On both systems around 25% of these tiles display a generic "blank page" image rather than the icon image associated with that program. That said the tile in question opens it's associated program and it's text label also displays correctly.......as I said earlier an annoying niggle!

By now you are all thinking ah its a icon cache failure just rebuild the icon cache!! I have of course rebuilt the icon cache following the instructions contained in option 2 of the tutorial here www.tenforums.com/tutorials/5645-icon-cache-rebuild-windows-10-a.html as well as deleting the C:\Users\<Username>\AppData\Local\IconCache.db file neither of which corrects the issue.

Additionally, I have manually, refreshed several of the icons (right click button tile > more > open file location) by changing and then reverting the .ico file through propert... Read more

More replies
Answer Match 63%

Hi,
I have a Packard Bell OneTwo S3221. It came factory installed with W7.

I upgraded to W10 last year after difficulty - upgrading to W10 via Windows update would not work, kept installing to a certain percentage then would reboot to a blank screen and freeze indefinitely, I needed to power off then on restart it would roll back to W7. This happened repeatedly despite trying all sorts - clean boots, uninstalling antivirus and updating drivers, etc.

I finally installed W10 using Media creation tool. Everything ran fine. But when the big update came in Novmember 2015 that failed to, in the same way as above, however all other monthly windows updates install fine.

Windows update never tried to push the Nov 2015 update on me again - I'm still on build 10240 now.

I was prompted to install the anniversary update by Windows update last week but that also failed in the same way as above. Download ok and begins installing fine, then at some point after 50% complete I get the blank screen indefinitely and have to power off, then it reverts back to W10 build 10240.

Having checked Packard Bell website my model is not supported by Packard Bell for W10, and they are not providing any drivers for it. This may explain the problems.

Can anyone suggest how to find out what the problem is and if there is a solution? I've tried looking in Update history for error codes, but there is none, it doesn't even show an attempt to install the anniversary update. Like i said every other ... Read more

A:Can't install Windows 10 Anniversary update, stuck on build 10240

Hi, simplest answer is avoid windows update and create the appropriate bootable medium or iso and use it as you did before.
As you know plenty of people have this sort of problem.

Note that the upgrade can introduce new issues for some (search the net), and some are delaying because of that. Older machines like yours could well exhibit such problems. So before you make this change, I recommend you create a disk image of your existing setup - a procedure you should do routinely anyway- to give another way of restoring your system.
E.g. Macrium Reflect (free) + its boot medium + external storage for images.

It's best to have a physical bootable medium as it covers all of:
a. if you need to repeat the installation
b. as a bootable medium for recovery options
c. in case you need to do an in-place upgrade repair install

without taking up disk space.

0 more replies
Answer Match 63%

Hi all,

Wondering if anyone else has experienced an icon display issue on their start menu with the 1607 update?

I have just clean installed (and fully updated) the 1607 Anniversary Update on 2 PC's and both are experiencing an identical issue with their start menu. The problem whilst seemingly minor is especially annoying given that I have performed the updates for some friends and it is a matter of pride to me that I hand over any such systems in a perfect state.

The Start Menu program list (A - Z list) as well as the "most used" and "recently added" lists contain icon tiles for the installed programs. On both systems around 25% of these tiles display a generic "blank page" image rather than the icon image associated with that program. That said the tile in question opens it's associated program and it's text label also displays correctly.......as I said earlier an annoying niggle!

By now you are all thinking ah its a icon cache failure just rebuild the icon cache!! I have of course rebuilt the icon cache following the instructions contained in option 2 of the tutorial here www.tenforums.com/tutorials/5645-icon-cache-rebuild-windows-10-a.html as well as deleting the C:\Users\<Username>\AppData\Local\IconCache.db file neither of which corrects the issue.

Additionally, I have manually, refreshed several of the icons (right click button tile > more > open file location) by changing and then reverting the .ico file through propert... Read more

A:Anniversary Update - Clean Install. Start menu anomaly

Hi, some ideas - you may have come across these already... fortunately this hasn't happened to me
(Yes, it says tiles, but appears to be talking about the icons)
Windows 10: How to fix blank tiles on Start Menu

Stardock products:
Windows 10 - Blank start menu icons - Super User

How does it look if you create a new user for test purposes?

P.S. I don't use Win 10's start menu - I use Classic Shell (free) to avoid all the issues and actually have a properly expressed start menu that I don't have to fight with. Eg. in Win 10's version of my Start Menu I see
Help
Help
Help
Help
...

- all shortcuts from individual subfolders for different programs, extracted and listed alphabetically. Some help that is.

more replies
Answer Match 62.58%

Install error code 0xc1900200
What is the problem??

More replies
Answer Match 62.58%

Trying to run the update, everything seems to run fine, and then I get a message about uninstalling an app that isn't compatible, but it isn't listed? I'm currently on Windows 10...
I've attached a screenshot.
I've tried doing a clean boot and still got the same results.

A:Anniversary Update Error

Originally Posted by maevinj Trying to run the update, everything seems to run fine, and then I get a message about uninstalling an app that isn't compatible, but it isn't listed? I'm currently on Windows 10...
I've attached a screenshot.
I've tried doing a clean boot and still got the same results. Do a antymalware cleanin and check old progrs forgotten in you pc

1 more replies
Answer Match 62.58%

I did a repair install of W7 Ult. x64 SP1. Applied all updates, but if fails to install IE10 update :

Attachment 286642

(as you see it is a dutch version).

If have run sure & sfc /scannow. Both report no problems.
CBS files are attached.
Please help ?

A:Windows update fails to install IE10 after repair install

Ok, it is working now. Steps I took :

1) Hide the update for IE10
2) Download and tried the installer for (my localized) IE10 : failed to install
3) Started windows update, suddenly there where 43 optional updates available including IE9
4) Installed all optional updates except IE9
5) Retried the installation of IE10 (not visible any more in updates) : succes

Hope someone else can bennefit,

Regards, Jan

1 more replies
Answer Match 62.16%

I have an existing Windows 10 Pro installation. My partitions are:
system reserved: 500 mb
C: boot, page file, primary partition
E: logical drive
F: logical drive
I would like to do a clean install with WIN 10 Anniversary Update (1607), and convert my disk from BIOS to UEFI.
What modifications would i need to do to GPTgen while upgrading and maintaining my programs and data?

Thanks

A:clean install with anniversary update & disk conversion BIOS to UEFI

Modifications....none.

Windows 10 already utilizes GPT partitioning....on a clean install. The only thing you would need to do is change your BIOS firmware from Legacy BIOS to UEFI BIOS. You will need to confirm that in your BIOS. Or to check with in windows.....in the search bar of cortana, type system information and when the window pops up, scroll down to BIOS mode......here's mine.

2 more replies
Answer Match 61.74%

Trying to update using Windows 10 Update assistant as automatic update not showing yet. It checks my system then downloads ok but once it starts it stops at 1 or 2 % and says "Something waent wrong " and gives error code 0x80070057.

All previous updates have been fine.

A:Anniversary Update error 0x80070057

Did that for me so i went the media creation tool way to install it

1 more replies
Answer Match 61.74%

Hi and greetings from Sweden!

New on the forum, long time lurker.

So my problem. Windows 10 wont update. Error code "0x800703ee". Things i have tried so far:
Cleaned and restarted Windows UpdateSFC /ScannowFollowed this guide: http://answers.microsoft.com/en-us/w...d-8928bd7831beTried updating via ISO

A while ago i had to recreate my EFI parition, perhaps it has something to do with it?
The last thing is to do a clean install, but such a hassel with all my hours of customization down the drain.

Thank you in advance.

More replies
Answer Match 61.74%

I just installed the Windows 10 anniversary upgrade.Wneh I tried to Scan a document, selected document scan, it tried  for a while and came up with the following error: Request to capture Moment failed with new HPPC_RESULT value as [1.829.88a.0] (GET_FRAME_TIME_OUT) I installed the Sprout Workstation update to no avail, I still get this error, cannot scan documents.Any idea Guys??? Thanks,

More replies
Answer Match 61.74%

Trying to update to the Anniversary Win 10 and after about an hour of "thinking" it said that it couldn't finish because of Error 0xc190012f. Currently the PC is running Win 10 with no outstanding updates, as far as I know.

Anyone else get this error or have a suggestion as to how to proceed?

Gerry

More replies
Answer Match 61.32%

On my Son,s computer . Before the update I made a image with macrium reflect , updated and the computer will not run , I keep getting a attempted switch from dcp error after anniversary update .. Ideas , thanks .

More replies
Answer Match 61.32%

I tried installing the Anniversary update using the Media Creation tool and I get this error when I log back in after the setup reverted my installation:

0xC1900101-0x3000D
The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATA operation

Any help would be greatly appreciated!

More replies
Answer Match 60.48%

Hello,

I recieve error C80003FA whenever I do a Windows Update run. It doesn't get past the stage of checking for updates.

I've tried several fixes including:
- Waiting 15 minutes and running Windows Update again.
- Letting Windows Update run on its own schedule.
- SFC /Scannow
- Renaming the Catroot2 Folder.
- Running 3 different Fixit tools.
- Clean windows install.

After each and every one of those fixes I've tried windows update and I still get error C80003FA.

SFC Scannow has previously said no errors, but the last run through it said there were unfixable errors. I've got the log, though for brevity's sake I will keep it until someone asks for it.

Any ideas?

Thanks.

A:Windows Update fails in Update Check. Error code C80003FA.

Clean windows install doesn't fix it? You must be blocked, maybe your firewall???

9 more replies
Answer Match 60.48%

Hi guys. I am seeing this error twice on every boot since upgrading (even a clean install doesn't clear it).


Code:
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 04/08/2016 02:03:45
Event ID: 10016
Task Category: None
Level: Error
Keywords: Classic
User: LOCAL SERVICE
Computer: Chris
Description:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{6B3B8D23-FA8D-40B9-8DBD-B950333E2C52}
and APPID
{4839DDB7-58C2-48F5-8283-E1D1807D0D7D}
to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="0">10016</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2016-08-04T01:03:45.289910000Z" />
<EventRe... Read more

A:Permissions error (CLSID/APPID) since Anniversary Update

Same here. Upgraded from Win 7 Ultimate to Anniversary Edition using the Media Creation Tool.

8 more replies
Answer Match 60.48%

I have HP ENVY x360 - 15-u483cl which worked perfectly for 7 months, till i got a windows 10 anniversary update. It caused my computer to give BSOD with "system service exception igdkmd64.sys" error after every 2 days. I have latest version of the driver (Intel High-Definition Graphics Driver, 20.19.15.4360 Rev.B). I tried every possible solution available on internet to solve the problem but in vain. Finally i had to disable the intel driver and put the notebook on Microsoft?s generic driver which ended the BSOD. Now i have to live with poor graphics. Probably the only solution is if HP launches a newer version of driver that doesn?t conflict with windows 10 anniversary update. Or is there any other solution?

More replies
Answer Match 60.48%

I have been attempting to upgrade windows 10 pro, from version 10240 to version 1607 (anniversary update). It looks like I have been stuck on 10240 so some time. I have tried both the Windows 10 Upgrade Assistant and the media creation tool (ISO - both from the HDD and bootable USB). I get to 96% and, boom, every time it resets and restores my system to where it was before the upgrade started. The error I get is as follows:
0x8007042B - 0x4001E
The installation failed in the SECOND_BOOT phase with an error during PRE_OOBE operation.
I have searched for an answer and haven't found one. I have tried to trouble shoot it as best I can by unplugging everything but my keyboard/mouse, updated chipset, etc.. MS techs haven't been much help. Any thoughts? I would rather not have to nuke the system. I hate having to reinstall programs (adobe is the worst). Any help is appreciated.
Thanks.

More replies
Answer Match 60.48%

Hi all,
I cannot update to Windows 10 anniversary update. I get the 0x8007001f error code.
Here is the log from C:\$WINDOWS.~BT\Sources\Panther\setuperr.log


Code:
2016-09-08 17:28:05, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Suspend(1066): Result = 0xC1800104
2016-09-08 17:28:05, Error MOUPG CSetupManager::ExecuteInstallMode(735): Result = 0x800705BB
2016-09-08 17:28:05, Error MOUPG CSetupManager::ExecuteDownlevelMode(391): Result = 0x800705BB
2016-09-08 17:28:06, Error MOUPG CSetupManager::Execute(236): Result = 0x800705BB
2016-09-08 17:28:06, Error MOUPG CSetupHost::Execute(372): Result = 0x800705BB
2016-09-08 17:38:30, Error CONX Failed hashing for \??\c:\program files (x86)\norton internet security\nortondata\22.7.0.76\definitions\sdsdefs\20160630.020\eng64.sys, 0x80070003

2016-09-08 17:38:30, Error CONX Failed hashing for [\??\c:\program files (x86)\norton internet security\nortondata\22.7.0.76\definitions\sdsdefs\20160630.020\eng64.sys] 0x80070003

2016-09-08 17:38:30, Error CONX Failed hashing for \??\c:\program files (x86)\norton internet security\nortondata\22.7.0.76\definitions\sdsdefs\20160630.020\ex64.sys, 0x80070003

2016-09-08 17:38:30, Error CONX Failed hashing for [\??\c:\program files (x8... Read more

More replies
Answer Match 60.48%

Hello,

My DU meter stopped reporting and collecting data after the 10 Anniversary Update. As you can see from the first screen shot my taskbar used to display the upload/download speeds but now it's just black

I tried reinstalling DU meter but no luck.

Win10 Anniversary update x64
Intel Graphics
4 GB Ram

A:Windows 10 Anniversary Update and DU meter Reporting Error

Hi, installed v7.15 on my 64 bit anniversary upgrade Win 10 Pro.. DU meter works, which suggests no intrinsic incompatibility. Which version have you got installed?

3 more replies
Answer Match 60.48%

original update went fine. 1511 update went fine. plenty of space on drive. plenty of available memory. windows defender security installed. ?

More replies
Answer Match 60.48%

I am trying to update to Anniversary edition of Windows 10 on 32GB ASUS Tablet. The update to 1511 went just fine. Now I am getting error when trying to upgrade to 1607 using Windows10Upgrade.28084. It checks compatibility and CPU, Memory and disc capacity all show good. Then get the page which shows error code 0x80070070 and states not enough space to install and suggests disc cleanup. Did that and have 18.0GB free space. But it will not let me download and install the upgrade. I do not have any apps running which I can remove. Surely 18GB is enough space. Please respond with a fix for me. Tablet is running 32bit OS

More replies
Answer Match 60.48%

I have been attempting to upgrade windows 10 pro, from version 10240 to version 1607 (anniversary update). I have tried both the Windows 10 Upgrade Assistant and the media creation tool (ISO). I get to 96% and, boom, every time it resets and restores my system to where it was before the upgrade started. The error I get is as follows:

0x8007042B - 0x4001E
The installation failed in the SECOND_BOOT phase with an error during PRE_OOBE operation.

I have searched for an answer and haven't found one. I have tried to trouble shoot it as best I can by unplugging everything but my keyboard/mouse, updated chipset, etc.. MS techs haven't been much help. Any thoughts? The iso is not on the OS drive, not sure if that matter. I would rather not have to nuke the system. I hate having to reinstall programs (adobe is the worst). Any help is appreciated.

Thanks.

More replies
Answer Match 60.48%

Hi.
An update fails to install.
It tells me this:

Code: 57A

"WindowsUpdate_0000057A" "WindowsUpdate_dt000"

It's an update for spamfilter for Microsoft Outlook.(I'm not even sure I have Outlook. -At least I don't use it.)
I would like to successfully install it, or at least get rid of it so it doesn't annoy me about a pending update.

Help appreciated. =)

A:Update fails to install

Which update (KB number) is this? If you don't have Outlook on your system, and this update pertains to it, then this might explain the failure.

You can hide this update http://www.sevenforums.com/windows-u...n-updates.html so that it doesn't bother you in the future.

3 more replies
Answer Match 60.48%

My Windows Update has been failing to update for a while now and I can't seem to find the solution. Here's the run-down of what happens step by step:Launch an update scan for Windows Update
It scans for a few seconds then says:





Quote:
Install new Windows Update software

To check for updates, you must first install an update for Windows Update.



Once I click Install it begins to "Install and Update," but then immediately returns to "Checking for Updates."
The next box I see says:





Quote:
Windows could not search for new updates

An error occurred while checking
for new updates for your
computer.

Error(s) found:
Code 800F081F


This happens every time I've attempted to update. After looking up the error code, I found the main Windows site that gave me the following explaination:
If you receive Windows Update error 800F081F, it means that Windows Update or Microsoft Update cannot determine the cryptographic service provider, or a file Windows Update requires (named catalog store) is corrupted.

I've looked through multiple Windows forums and How-To's and have tried all the fixes I found. SURT, sfc/ scannow, the standalone download for WU, Windows Update Diagnostic, multiple malware scans, and Microsoft Fixit. Ultimately, I always get the same error code, (800F081F).

I should also say this problem has been here for a few months now, and it's becoming more worrisome as more time passes. The longer I... Read more

A:Windows Update fails to update, error code 800F081F

Hi Mookeylee & welcome to Sevenforums.

Please follow Windows Update Posting Instructions

We need to see the logs to determine the cause of the error.

Worst case scenario, and last resort, repair install windows 7. No big deal I just did 2 yesterday win7x64 Home Premium. Brink posted a great tutorial Repair Install.

3 more replies
Answer Match 60.06%

I've tried to do with Windows 10 Anniversary update on my Inspiron 2350, but each time I try, it tells me it can't proceed because of a video error.  I've gone to the 2350 page and I've done all the driver updates there were to install but that didn't fix the problem.  Does anyone have any idea what the problem is? 

More replies
Answer Match 59.64%

when windows update fails to install a KB, and it lists it as FAIL.

why wont it reinstall or re-download ?? Or does vista reinstalls it when you restart the computer?

A:when windows update fails to install?

Try it from the administrator account. Do you see custom and express?

6 more replies
Answer Match 59.64%

Windows update keeps reminding me to install a Security Update for Microsoft .NET Framework, version 2.0 (KB928365). No matter how many times I download the 14.7mb file and successfully install it, the update shield keeps reappearing to remind for another installation of the same update. Would appreciate help in resolving this issue. Thanx.

A:windows update fails to install

I am having the same problem. Will someone please help?
Thanks

1 more replies
Answer Match 59.64%

Sorry for the short title, I didn't know how to word my issue.

My problem started when I had started getting BSOD's. To fix I had de-fragmented (didn't work) and then I had to do a system restore which appeared to fix it although it didn't keep my files instead deleted them. I tried installing a game on steam that required framework 3.5 but It failed to install giving me this error code: '8007371B'. I had researched and found no luck with finding any fixes, it's not even heard of. I tried doing a factory reset with comes up with the same error code, I have also tried upgrading to win 10 and using a media (installation disk) to install which had no luck and come up with the same error code.

I am desperate as soon I will not be able to upgrade to windows 10.

-Fraser J-

A:Windows 8 fails to update, install etc. Please help.

It's a problem with your Boot Manager. Your Boot Manager is what boots into Windows, and a problem with it can cause ou to not be able to boot into Windows.

First thing to try is something called 'Startup Repair'. You'll want to follow this guide: http://www.bleepingcomputer.com/tutorials/http-wwwbleepingcomputercom-tutorials-automatically-repair-windows-8-with-automatic-repair-/

If that doesn't work, you'll need to reformat the PC. If you can't repair the boot manager though there's going to be no other options. You'll lose your data so do try Startup Repair first.

The reformatting will work for sure, but regardless, once you're up and running I would recommend that you start backing up your data regularly. Either a disk imager like Macrium Reflect or a snapshot tool like Rollback Rx. Either will do the trick but you'll want to start backing up your data.

1 more replies
Answer Match 59.64%

Ok, here is the deal, I was having problems with my router and was receiving help from this site on another thread when I suddenly couldn't get online. I did some research and found out that I had malware that prevented me from getting an IP address and caused me many many headaches to fix. After almost 10days without being able to get online, I finally found a fix that resolved my issue, a complete repair install of XP. After that, I was finally able to get online, but one of my drivers was causing a BSOD error (I think that's how you say it), and I remember when my computer completely crashed back in February and I did a complete XP re-installation, I had the same problem. I remember that the fix was to download the XP updates. So, I go to Microsoft Windows update site and try to download the program that lets you use the site for XP updates and keep getting an error message: "The following updates were not installed: Update for Background Intelligent Transfer Service (BITS) 2.0 and WinHTTP 5.1 (KB842773)
Microsoft Windows Installer 3.1." When I go to Windows Update History, instead of saying that it failed and allowing me to see why it failed, it says that it was cancelled and I can't find out why. I have tried six times to download this update to no avail, and am ready to get out the hammer. I plan on getting a new computer within the next month, but I need this one to work until then. My stress level is already through the roof with work, so when I say I'm rea... Read more

A:[SOLVED] update fails to install

Dont get teh hammer out yet..

try a manual install of the update-
http://www.microsoft.com/downloads/d...displaylang=en
* if your system does not validate, your XP install key is no good
or
Try clearing the Windows download directory, and then visit Windows update again.
To do this, follow these steps:
Stop the Automatic Updates service. To do this, follow these steps:
Click Start, click Run, type services.msc, and then click OK.
Right-click the 'Automatic Updates' service, and then click Stop.
Minimize the Services snap-in.
Empty the SoftwareDistribution directory. To do this, follow these steps:
Click Start, click Run, type explorer, and then click OK.
Open My computer - local disk C - Windows - SoftwareDistribution
( or paste this in the address bar: C:\Windows\SoftwareDistribution\ )
empty the folder
Start the Automatic Updates service. To do this, follow these steps:
Maximize the Services snap-in.
Right-click the Automatic Updates service, and then click Start.
Close the Services snap-in window.
Visit the Windows Update Web site

19 more replies
Answer Match 59.64%

I have tried to install the nvidia update (see the pic),
but It fails at some point of the progress. Also, why doesn't it download the file, because after pressing "install" it doesn't start to download the file, has it done it already? The file is about 245mb. Has my PC downloaded a corrupt download which causes why the setup fails? Any ideas?

Thanks.

A:nvidia update - fails to install

Hello Deepndark,

You might see if you may be able to download the NVIDIA driver directly from NVIDIA at the link below instead. You'll just need to select the model number of your graphics card/chip.

NVIDIA Driver Downloads - Advanced Search

Hope this helps,
Shawn

7 more replies
Answer Match 59.64%

For about 3 months now, my mother's laptop, which runs Windows Vista, has been out of date update wise because one particular update, KB2443685, fails too install. I've tried everything I can think off, even manually downloading the update itself, and it still won't install. The Error code is 80070490 So if you can, please let me know what the problem is. I'd be truly grateful for your help.
 

A:KB2443685 update fails to install

Have you tried disabling your antivirus first?

Are all subsequent updates also failing to install?
 

2 more replies
Answer Match 59.64%

I run XP SP3. Automatic updates is turned on and works all the time except this one:Microsoft .NET Framework 1.1 Service Pack 1 Security Update for Windows 2000, Windows XP, Windows Vista, Windows Server 2008 (KB953297)It would seem that this is an old update as I run SP3 and this appears to be an SP1 update. If there are more updates it installs them but fails on this one.The machine works fine. Is this a symptom of a larger issue?Thank You

A:Windows Update fails to install

That update means it is for .NET Framework 1.1-SP1. SP1 refers to the NET Framework,not your XP version.
Go to the Windows Update website,let it scan your computer for updates and this update shows again,try to install it there.If it fails again then don't worry about it.
Have you checked your"Add/Remove Programs" to see if you have .NET Framework 1.1 installed on your computer,or .NET Framework 1.1 SP1?

13 more replies
Answer Match 59.64%

After help cleaning the Malware and junk from this laptop the windows updates fail to install. I rebooted and retried to no avail. I couldn't find a wi 8 problem like this so I'm asking if anyone can help clear this up?

A:Windows update fails to install

Hi

21 more replies
Answer Match 59.64%

I've been trying to update my Nvidia driver and so far have had no luck.

I've got two 570's in SLI running great on version 290.53 but all attempts to update my driver to 295.73 end in failure.

I've tried doing a standard install and also doing a custom install with the "Clean Install" box checked on the driver's options screen when starting the install.

I may be missing something, but going through the device manager and uninstalling the driver there first only leads to Windows automatically starting a driver search, preventing me from installing the one I want. Also using the control panel to uninstall them reaches the same point.. windows automatically installing a driver (285 version)

Any ideas, guys?
Specs are listed where they should be below.

A:Cannot install Nvidia 295.73. Fails During update

  
Quote: Originally Posted by Gromit1710


I've been trying to update my Nvidia driver and so far have had no luck.

I've got two 570's in SLI running great on version 290.53 but all attempts to update my driver to 295.73 end in failure.

I've tried doing a standard install and also doing a custom install with the "Clean Install" box checked on the driver's options screen when starting the install.

I may be missing something, but going through the device manager and uninstalling the driver there first only leads to Windows automatically starting a driver search, preventing me from installing the one I want. Also using the control panel to uninstall them reaches the same point.. windows automatically installing a driver (285 version)

Any ideas, guys?
Specs are listed where they should be below.


Had this happen before , get this file - run - then select Nvidia - select the nvidia files - follow the prompts . restart the computer - when asked if you want to install the video driver / new hardware found / select NO . install the new driver ..

All should be good in Nvidia land ..

6 more replies
Answer Match 59.64%

Running Windows 2000 Pro SP4. All Microsoft updates download and install without problem except NET.Framework 1.1 Service Pack 1. The update downloads fine but fails to install. No error message just fails to install and recommends trying again. No other perceived problems.
 

More replies
Answer Match 59.64%

I have a Dell Desk top using Windows 7 Home Premium. I get notifications constantly to Update KB2862330 388 KB to my Computer. It fails to configure this Microsoft update over and over, but the notifications continue over and over. I cannot stop the update
notifications.,, can you help me with this please. All other updates are successful in updating 100 % percent. This KB2862330 shuts down @ 11% and will not configure...

A:Update KB2862330 fails to install

You can try disabling notifications for this individual update by going into control panel checking for updates, when the update appears you can check the box to hide the update. (Sorry I don't have any pending to give you a better walk through)
OR
Manually download the update from Microsoft and do the install.

Let me know if either helps

4 more replies
Answer Match 59.64%

I have Windows 7 Ultimate 64bit. I went to install the update KB2454826 by way of windows update, and I got a "failed to install" error.
It specifically gave me: "WindowsUpdate_80073712" "WindowsUpdate_dt000"
I went and manually downloaded this update to install it myself, and the entire install process went as normal until the end, and it gave me a fail install error again. I rebooted my computer between each attempt.
Can anyone provide for me some information on how to correct this?
Thank you.

A:Update KB2454826 Fails to Install

the WinSxs folder is damaged.

Please start the command prompt (cmd.exe) with admin rights [1] and run sfc [2]:

sfc.exe /scannow

Is it able to find and repair broken files (create the txt file shown under [2] and look if all files are restored)? If not, replace the DLL with the file from your DVD [3]. Also try the
System Update Readiness Tool for Windows [4].

Are you now able to install the updates? If not, please run the Windows Explorer and go to the folder "C:\Windows\Logs\CBS\" and copy all files to your document folder (otherwise you can't upload it), zip all files into 1 ZIP and upload the zip to
your SkyDrive [5] and post a link here.

best regards
André

[1]
http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token

[2]
http://support.microsoft.com/kb/929833
[3]
http://blog.nirsoft.net/2009/09/17/how-to-extract-missing-system-files-from-the-dvd-of-windows-7vista/

[4]
http://support.microsoft.com/kb/947821
[5]
http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
"A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/

5 more replies
Answer Match 59.64%

I keep getting an update for my printer,Brother 2240D series, 4.7MB. I think I can remember it loading successfully about 6 months or so ago? The printer works OK but the update is still there even after I try to update it? Theres no problem except that its annoying. Can I get rid of it?

A:Printer update fails to install.

Is it a Windows update?. If so just hide it.

2 more replies
Answer Match 59.64%

A software update for the bing bar 6.0 was received onn Mar 8, and every time I shut my system down I get a message to not to turn of the power because software is being installed (KB2459075). It fails every time but i can't find any meassage why it failed.
I am NOT using the Bing bar, & would just like to get this fix out of my system
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 32 bit
Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3003 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 3 Mb
Hard Drives: C: Total - 227397 MB, Free - 176460 MB; D: Total - 10972 MB, Free - 1218 MB;
Motherboard: Wistron, 3612, 09.66, 2CE927T5DX
Antivirus: Norton AntiVirus, Updated and Enabled
 

A:Bing Bar update install FAILS

On IE. Go to tools, manage add ons, and uninstall or disable bing tool bar.

Or use ccleaner/tools/uninstall/run uninstaller

or review http://www.sevenforums.com/browsers-mail/23619-how-remove-bing-toolbar.html
 

1 more replies