Tech Problem Aggregator

kodak all in one printer has nerver printed correctly

Q: kodak all in one printer has nerver printed correctly

hi my name is Sam i have had a printer brought me from parents all time i have had it has never printed. ink miss prints and bad quality i have read reviews which sound very positive but why is mine really bad

A: kodak all in one printer has nerver printed correctly

Did it ever print ok? Have you tried cleaning the print heads - there should be feature in the printer properties or Kodak monitor program to let you do this. Clogged heads are most common cause of bad quality printing. If it doesn't improve after several cleans, then best throw it away - printers are cheap, repairs are not.

3 more replies
Answer Match 60.48%

Hello, I am happy to supply whatever tech info to resolve this issue which has defeated me for 6 months. I cannot connect my HP G60 laptop Vista to HP printer or Kodak. Having looked at old threads I am not the only person to run up against this very hard problem. I would prefer not to bin my Laptop and buy an apple mac for compatability issues with 3rd party software. My solution at present is using a stick and transferring to XP sony lap top which is a nightmare as both have different versions of microsoft office. I am new to this forum and apologise in advance if my thread post does not meet the standards required of this collective. many best wishes to all.

A:HP laptop ( Vista ) wont connect to HP Printer or Kodak all in one printer

What models are the prints?

http://www.kodak.com/eknec/PageQueri...?pq-path=12666

http://www.google.co.uk/url?q=http:/...PZNrpnwlbm3EaA

17 more replies
Answer Match 60.06%

When i try to print something the documents appear in my print queue then are deleted before they even begin to print, my printer was working fine until yesterday and now this

Please help

Steve
 

A:Printer deletes documents before they are printed

G'day steviejay, sounds like you have an intelligent printer that is censoring your output!
That is a worry, I haven't seen that problem previously.
You might try having a look in your control panel, system, devices or device manager, with a bit of luck when you scroll down through all your devices you will find a USB printer, (assuming yours is usb) if you open that item you should see something like "this devise is working properly" which is a good start for troubleshooting.
There should be no yellow exclamation marks on this item.
Are you quite sure your print queue in the print manager is being actually deleted?
What kind of printer is it?
The assumption is that it is a PC using a windows variant.
Cheers, qldit.
 

1 more replies
Answer Match 59.64%

Hi, one of my clients is using the Epson ex 330 dot matrix printer on a windows xp sp 2 machine. Now this printer stopped working on this machine since the 24 pin port on the motherboard got spoilt. So I tried to connect this printer to this machine using a USB to parallel port converter. Now the thing is that the printer is added but when I try to give a test page print or any other print the print spooler shows 1 doument printing. But within 3 seconds it disappears and prints nothing with no error message. Another thing is that this printer used to run on the Epson LX 800 driver since there is no EX 300 driver is the default drivers list. And now I have added it on the same i.e LX 800 driver. But I don't think this should be any sort of problem. Expert help is appreciated. Thanks!!
 

More replies
Answer Match 59.64%

Hi all

I have a HP officejet v45, which has had new hp cartridges installed recently. Alignment page printed and aligned. Colours on tis page where as normal. After this I could only print about 30% of a page going across the page. Tried printing test page which again only printed about 30% of normal. Have uninstalled printed removed drivers and software via ADD/REMOVE PROGRAMS in Control Panel.

Have used both the installation disc and a downloaded set of drivers and software from the HP website to reinastall the drivers to no avail.

I need the printer to print off CV's for an interview for a new job over the next few days.

HELP please........

Tahnks for any help on this matter. I am using XP SP3, recent updated via microsoft website.
 

A:Printer test page half printed

7 more replies
Answer Match 58.8%

I have an Access database used on daily basis to enter and print the maintenance work order in a report format. I have assigned a command button to print the required record. On clicking the button in the Form, a parameter query will run asking the user to put the record number to proceed. Once the correct record number is entered in the parameter text box, the report is previewed and the user click on the print button to print the same.

My question is as follows:

Is there any method to find out the record i am going to print now was already printed before? A kind of record keeping for the printed records.

Also, a message box should warn the user saying incase if the record was already printed, “The record was previously printed, do you want to continue printing again?”

Please tell me a way to perform the above in my Form.
Thanks,
Hash
 

A:Record keeping of the printed records & warning user when printed more than one time

could't you just add a field in the record for printed?

Then if printeed true, show warning, else show printable form.
 

2 more replies
Answer Match 58.8%

I am accessing an HP Laserjet 4650 via network and everything works great except for when I try to print out 2 or more copies of a 36-page PowerPoint presentation. I have both checked and unchecked the Collate box when I'm about to print, but neither seems to actually collate the printouts; it always prints out pages like 1, 1, 2, 2, 3... etc.

Any insight on this would be greatly appreciated.
 

A:HP4650 LJ Printer - Will not collate printed PowerPoint slides...

I tried the same in other programs, and no matter which program I print from, it neglects to collate the pages, whether or not I select Collate or not.
 

1 more replies
Answer Match 58.38%

I can't get my new laptop to recognize my old Kodak 500 Photo Printer as a printer. It shows up as a "device" instead, and so I can't print to it. Has anyone else had this problem and found a fix?

A:Kodak Photo Printer not recognized as printer

What driver did you install? There is no Win 7 driver on the Kodak site for your printer but the Vista driver should work. There's also a firmware update that you may need to install but you won't be able to do that until you get the computer to recognize the printer. Kodak Photo Printer 500

2 more replies
Answer Match 56.7%

HELP PLEASE -- I am trying to transfer some pix I just took (31 in total) via dock to my computer.

After the 2nd pix has transferred over, I get a SCREEN BOX that says

"Transfer interrupted ===
REASON: The volume for a file has been externally altered so that the opened file is no longer valid."

I do not know what this means.

I also use Picasa by the way, don't know if that is affecting my problem?

I've never seen this message box ever before. Kodak is about 6 years old.

Please know that I am a computer moron so I am hoping that anything you say I can understand. Sorry.

Thank you in advance.
 

More replies
Answer Match 56.28%

http://tech.msn.com/downloads/articlepcw.aspx?cp-documentid=22410320
 

A:Security(some I nerver heard of)

6 more replies
Answer Match 55.44%

Hi, newbie here and to Windows 10,

I recently upgraded to Windows 10 (upgraded in the loosest sense), first it was no sound which after hours of messing about I managed to fix, but now I have no printer at all.

Windows 10 does not recognise my printer, it is a Kodak 3.2 wifi printer on my home network, it was perfectly fine in Windows 7, but even after trying to add device it finds nothing, I updated the driver to Kodak's latest and still it won't recognise the printer.

I would not be too bothered but I need the printer working for work related stuff, no idea how I can get this os to find the printer, anyone have any ideas please?

I am starting to regret this upgrade, I also have files that won't delete due to invalid ms-dos errors, oh and I can't figure out how to make my background picture into a slide show as my picture files won't show up on the slideshow tab for some reason.

Maybe this Windows 10 needed more beta testing before release, too much is going wrong.

A:Kodak 3.2 printer

Is anyone able to help?

Have tried installing the printer through a wired connection but Windows 10 will not install any drivers for it, keep getting errors, I have checked network sharing and un-installed all drivers and re-installed the latest kodak drivers.

If I try to install drivers I keep getting 'could not find file, error 0x00000002' and it stops, all print spooler services are started as well as all dependencies, can't figure out why it won't install 1 driver.

Hope someone can help.

12 more replies
Answer Match 55.44%

while talking with a kodak person he told me to put net spool in but computer would not do what he wanted it to do. what exactly does a net spool do? and why should that fix my conection between printer and computer..thanks karen

A:new kodak all in one printer

You state your OS is Vista, yet you posted in the Windows 2000 Forum. Is this also your post: http://www.computing.net/answers/wi...Details would be good. Did you install the software and then connect the aio when prompted? How about some more information?"So won?t you give this man his wingsWhat a shameTo have to beg you to seeWe?re not all the sameWhat a shame" - Shinedown

2 more replies
Answer Match 55.44%
Answer Match 55.44%

I have a laptop running Windows 7 (64 bit) and I cannot get my Kodak 5100 AiO printer to work. I have downloaded the latest software from the kodak website and downloaded the latest firmware but programs such as notepad, paint or word will not print. The only thing I can get to print is a calibration page from the "maintenance" button under "Printer Preferences". I'm on hold with a kodak tech. as I type this message. So far, he's had me remove device & install the printer with no results....still can't print. Next thing we just tried was stopping & re-starting the printer spooler.....still can't print. He put me hold again. We went to "device manager" I had 2 usb composites, so he had me uninstall one. I then removed printer again & re-installed the printer.....still can't print. Back on hold so he can talk to his supervisor. Now I've been asked to uninstall the printer and download the software and firmware again. This will take awhile. If anyone else has had this issue resolved please let me know how.

A:Help w/Kodak AiO Printer

Hello Meandher!

When you try to print in word, does it go to the queue? What driver do you currently have?

Thanks,
Sarah

3 more replies
Answer Match 55.44%

Most reviews I've been reading are negative. But their reasons are generally negative due to receiving the printer without a usb cable or that it's not bluetooth capable (whatever that is). Some say it prints like crap unless you use only Kodak paper, while others say the print quality is okay on other brands of paper. The ink is supposed to go much farther than others as well. So I'm wondering if that part is true, does the ink last much longer than what would be typical? Also, has anyone used non-Kodak paper in it and it works out acceptably? I don't print my photos at home, so that's not an issue. I just want the kids to be able to use it for classwork and for printing documents, so quality doesn't have to be out of this world. Input?
 

More replies
Answer Match 55.02%

My new Kodak ESP 5250 wireless printer will not work with my D-link DIR 615 router. According to Kodak customer support, my wireless router needs configuring. They told me that the "always broadcast DHCP" should be disabled. If that makes any sense! Is this something I can do myself? I was on the chat line with Kodak for 2 hours, then I was on the phone with them for about one hour before they finally told me that.
 

A:DIR 615 and my Kodak wireless printer

7 more replies
Answer Match 55.02%

Hi i have a kodak esp.c310 and i get this problem when ever 1 ink cartridge is out i cant print anything even if the black and white one is full and i want to print in just black and white it wont let me is there anyway to get past this?

A:Kodak printer always needs both ink cartridge

replace the color one and keep the black one,( there is no white )
i have a kodak printer and the color usually runs out before the black ink,

8 more replies
Answer Match 55.02%

I am at my wits end. I build and work on computers as a sideline, so am reasonably competent with them. However, this one has me completely stumped. I am trying to get a brand new Kodak Printer hooked up to a friend's Dell laptop and the two machines absolutely will not talk to each other. We even took the first printer back and got another one.

Dell Studio laptop
Vista Home Premium 32 bit
Kodak ESP5 All-in-One

A copy and paste from one of numerous e-mails sent to Kodak support.....

The printer will make copies just fine. It appears as the default printer in my printer settings. When I try to print, it is listed as an available printer. Under the listed printers, it is selected to use on-line. I have tried setting the on-line option from the administrator option in the right click options. The only devices I have connected to the computer are this printer and a USB wireless mouse.

I have tried 3 different USB cables and each of the available USB ports on the laptop.
I have uninstalled the software from the CD and downloaded the drivers from the website with the same result. There is a printer icon in the startup items in the taskbar. When the USB cable is plugged in, a red X flashes and the error message is, "Printer Communication Error" and asks me to be sure the USB cable is OK and to turn the AIO on and off. However, when I unplug the USB cable, the error changes to, "Printer not responding" and asks me to be sure printer is on, USB cable is ... Read more

A:Kodak Printer will not install

16 more replies
Answer Match 55.02%

I am running windows 7 in 64-bit mode. When I plug in the usb cable to the G610 nothing happens. I have tried 2 different cables. I cannot transfer pictures or do anything from my computer, but it works by itself with the C913 camera. Not sure this is the right forum, but I have gotten good help from here before, so I thought I'd try. Any help appreciated. Cheryl

A:Kodak G610 printer

Try another usb port. Do you have a usb flash drive or any other usb device you can use to test to verify the port(s) are working?

Also:
Some firmware updates and the vista driver (should work for windows 7 if it comes up as unknown device)
http://www.kodak.com/global/mul/serv...duct=EKN033119

5 more replies
Answer Match 55.02%

Hi can anyone help?
I have aKodak ESPC315 - setup is as its always been,ink is full,when press print its going through the motions but the paper is coming out plain!
 

A:Solved: Kodak Printer

try cleaning the print head

http://resources.kodak.com/support/shtml/en/manuals/urg01243/urg01243c10s1.shtml

user guide here

http://support.en.kodak.com/app/answers/detail/a_id/32679/selected/true
 

3 more replies
Answer Match 55.02%

I am at my wits end. I build and work on computers as a sideline, so am reasonably competent with them. However, this one has me completely stumped. I am trying to get a brand new Kodak Printer hooked up to a friend's Dell laptop and the two machines absolutely will not talk to each other. We even took the first printer back and got another one.

Dell Studio laptop
Vista Home Premium 32 bit
Kodak ESP5 All-in-One

A copy and paste from one of numerous e-mails sent to Kodak support.....

The printer will make copies just fine. It appears as the default printer in my printer settings. When I try to print, it is listed as an available printer. Under the listed printers, it is selected to use on-line. I have tried setting the on-line option from the administrator option in the right click options. The only devices I have connected to the computer are this printer and a USB wireless mouse.

I have tried 3 different USB cables and each of the available USB ports on the laptop.


I have uninstalled the software from the CD and downloaded the drivers from the website with the same result. There is a printer icon in the startup items in the taskbar. When the USB cable is plugged in, a red X flashes and the error message is, "Printer Communication Error" and asks me to be sure the USB cable is OK and to turn the AIO on and off. However, when I unplug the USB cable, the error changes to, "Printer not responding" and asks me to be sure printer is... Read more

A:Vista and a Kodak printer.

I am having the same problem. I have VISTA Ultimate SP1. I checked the logs and it tells me that Kodaksvs.exe crashed, then the print spooling system crashed. Kodak sent me a new USB cable, but no joy.Tried their cleaning program and reinstalling from the web but no joy. Requested that they post the entire download of the AIO installer so it could downloaded and installed instead of the web and they reacted as if they had no idea of what I was talking about. Since the problem couldn't be resolved by their standard procedure, which means they couldn't find it the manual, I asked for the next level tech help. The person who I was talking to put me on hold and then said his Supervisor wouldn't come out of the office. Then they blamed it on my motherboard and said I had to go to the MB manufacturer and download the proper drivers. My USB HP 1320 works fine, the USB mem sticks work fine, my WD MyBook works fine. Every thing works but the Kodak 5500 AIO wont work with USB. I was able to hook it up to my network with a print server from Cables to go and I can print to it, but cannot scan to the computer. Its definitely a Kodak software issue.

38 more replies
Answer Match 55.02%

My KODAK ESP 3250 SCANNER/PRINTER suddenly will not print black text. Prints all other colors just fine. Replaced black cartridge but still will not print black text. Ran inkjet cleaner sheet thru the printer, but that did not help. It even printed black text on the cleaner sheet, but would not print it on a sheet of printer paper afterward. Tried reinstalling the driver, but was directed to a driver update which would not download and install. Here is my system information:
OS Version: Microsoft Windows 7 Home Premium, 32 bit
Processor: AMD Athlon(tm) Dual Core Processor 4450e, x64 Family 15 Model 107 Stepping 2
Processor Count: 2
RAM: 2942 Mb
Graphics Card: NVIDIA GeForce 6150SE nForce 430 (Microsoft Corporation - WDDM), 128 Mb
Hard Drives: C: Total - 226949 MB, Free - 119023 MB; D: Total - 11523 MB, Free - 1644 MB; G: Total - 238472 MB, Free - 212422 MB;
Motherboard: ECS, Iris8
Antivirus: Lavasoft Ad-Watch Live! Anti-Virus, Updated and Enabled
Any help will be greatly appreciated.
 

More replies
Answer Match 55.02%

I have a kodak esp5 all in one printer i am trying to use as a network printer. I can see the printer on the network but when i try to print from my wireless laptop it says printer is not online but the printer is on. I am using a linksys wrt610n router. is the kodak esp 5 network compatible or do i need additional hardware.
 

A:Network kodak printer

all depends upon the wiring.

if the router is connected ---> ESP5, then it will appear on the Network

if the ESP5 is connected to another system, then it is a shared device on that system and needs to be shared.
 

1 more replies
Answer Match 55.02%

Ok using the kodak printer ESP 3250 with vista HP 32 and i can t edit scranned documents so i think i need some free OCR (?) software to work its magic; so any ideas how to get that and where and is it easy to use - thanks hugs . .
 

More replies
Answer Match 55.02%

I'm trying to find some Linux drivers for this device, but before everyone looks away, this is an easy one!

What I need to know is what printer is this based on? I know it's a Lexmark of some sort, with this info I'll (hopefully) be able to source some drivers.

Thanks folks.
 

A:Kodak PPM200 Printer

hehe not really that easy.
Only thing I can find are the basic specs http://www.lexmark.com/US/products/tech_specs/0,1231,NzAyfDE=,00.html

Not very helpful. I'll look some more but not finding much.
 

2 more replies
Answer Match 55.02%

I have already contacted Kodak and they told me my printer is broke and I need to buy a new one. I really think it should be fixable it was a stupid mistake that "broke" it. And all they did was have me unplug and plug it back it to see if it would unfreeze it. Very technical of them . . .

Anyhow, I was hoping that maybe someone else might be able to help me out. This is what happened, I opened my AiO home center and while messing around in there a firmware update popped up. I clicked to update but then saw that I was supposed to have my printer on. Well, little did I know that you are not supposed to stop the process of a firmware update but that's exactly what I did. I hit ctrl + alt + delete and ended it. Since then my printer has become non responsive and the pc no longer detects that it is even there. I just can't believe that that one stupid mistake could have completely broke my printer. There must be a way to fix this. I'm running Windows XP on an HP athalon 64 X2 with 4gb of ram. The printer is a Kodak EasyShare 5100 all in one printer. I have tried to install the new firmware in the printers current state but I get a message that no printer is detected. If more info is needed please let me know. I would greatly appreciate any help if it can be provided. Much thanks.
 

More replies
Answer Match 55.02%

I'm running my Kodakprinter with my HP computer with Windows Vista. Can anyone tell me where I can go to update my Kodak drivers?
 

A:Solved: Kodak Printer

Try the Kodak site below

http://support.kodak.com/app/intfSe...pc3QvYy84OTAvb3JpZ19pbnRmL2tvZGFrX2IyY19lbg==
 

2 more replies
Answer Match 55.02%

Hello, have a Kodak ESPC315 Printer.Problem, not Printing because it is saying the printer driver is Unavailable. In Device and printers it gives two Kodak printers, it gives the Kodak esp C315 AIO XPS as the Default Printer, and the Kodak esp C315 + 3444 Which should be the DEFAULT Printer is not recognised. This happens all the time I come to use my printer Please Help, thanksWindows 10message edited by gep

A:Kodak Printer problem need help

Assuming you've loaded the proper software/drivers for your printer, just go to Devices & Printers, right click on it, & then select "set as default". Kodak lists driver up Windows 8.http://www.kodakdriver.com/kodak-es...http://support.en.kodak.com/app/ans...message edited by riider

4 more replies
Answer Match 54.6%

I purchased the Kodak Easyshare 5300 Printer and when the printer is connected to the harddrive the external wireless card gives an error message of unknown devise and the internet no longer works. If you disconnect the printer USB cable and restart the computer the external wireless card is recognized. Any suggestions on what is causing this and how to fix it?
Kodak has been absoluetly no help
 

A:Kodak EasyShare 5300 Printer

Have you tried changing the USB ports that the printer and the Wireless card are connected too? The computer should have several USB ports available.

Also post the specs on your computer and the operating system you are using.
 

2 more replies
Answer Match 54.6%

Dad needs help in wireless Kodak 5500 printer. Setting the scene: First, he operates both computers on Vista. Secondly, he has Linksys print server upstairs with Kodak printer and a desktop next to it. Thirdly, he has laptop downstairs and wants to print wirelessly to the printer located upstairs. He is operating with 802.11 on all devices. He needs a step by step procedure to get the printer to print from computer upstairs and downstairs. Can anyone provide me a printed version of each exact step to this problem? I would appreciate this very much.
 

A:Solved: Wireless Kodak Printer

I looked at the Kodak 5500 specs and found that it is a all-in-one, but does not seem to have wireless capability. So, that's why there is also a print server in the mix?

What is the problem? Is that print server supposed to work with the Kodak 5500?

If you want a printed version of each step suggest you first look at whatever manuals you have for the print server and print them if necessary.
 

1 more replies
Answer Match 54.6%

I have a Kodak Hero 3.1 connected to my Motorola Surfboard SBG8560 modem/wireless router. It connects fine and I can find the printer and even print hen my computer is connected to Ethernet but not when I switch over to wifi. This is on a computer running windows 8 rp but I know the os is not to blame because it is not found by my roommates mac on wifi or my other roommates windows xp machine. i figure it must be a router setting that i am missing. When i run arp -a in cmd this is what i get:

Code:
C:\Users\William>arp -a

Interface: 192.168.0.7 --- 0xc
Internet Address Physical Address Type
192.168.0.1 20-e5-64-e2-4b-bb dynamic
192.168.0.6 f4-6d-04-40-d6-0e dynamic
192.168.0.10 e0-69-95-97-e9-7a dynamic
192.168.0.255 ff-ff-ff-ff-ff-ff static
224.0.0.2 01-00-5e-00-00-02 static
224.0.0.22 01-00-5e-00-00-16 static
224.0.0.251 01-00-5e-00-00-fb static
224.0.0.252 01-00-5e-00-00-fc static
239.255.255.250 01-00-5e-7f-ff-fa static
255.255.255.255 ff-ff-ff-ff-ff-ff static

Interface: 192.168.0.10 --- 0xd
Internet Address Physical Address Type
192.168.0.1 20-e5-64-e2-4b-bb dynamic
192.168.0.4 e0-ca-94-1d-ce-f1 dynamic
192.168.0.6 f4-6d-04-40-d6-0e dynamic
192.168.0.255 ff-ff-ff-ff-ff-ff static
224.0.0.2 01-... Read more

A:kodak printer will not connect over wifi!

Welcome to Seven Forums,

Did you setup the network security with the correct pass-phrase on the printer?

Try running AdvancedIPScanner, you'll be able to see all your network devices.

1 more replies
Answer Match 54.6%

Really dont know where to start with my problem
Have been using my desk PC & Kodak esp 1.2 aio printer together quite happily for a couple of years.
Have now decided to use my printer instead with my Lenora T430 Thinkpad.
My printer recognises my router signal but when I try to add the printer to laptop devices/printer etc it shows a correct picture of my printer as if it is an installed device, but nothing will print.
When I right click on picture to give instruction to make sure it is default setting for printer, that default setting option isnt there, it starts the options with start scan, start profiles, start properties etc.
Its almost as if the laptop only recognises the printer as a scanner.
Also printer only seems to be installed as a short cut?

More replies
Answer Match 54.6%

I am not sure if this is where I need to be or not but here goes. I have a Kodak EasyShare Printer Dock 3. I have had it for about 4 years. I tried to print pictures from my camera by docking it on top of the dock as usual. It printed two pictures ok and then when I started the third one it ran it through the first time and then stopped. Said there was a paper jam. The paper had come out the back as usual but then did not go back through. I turned the printer off and cleaned the rollers. When I turned it back on it said that I needed to change the color cartridge. Even though I had not used all of the one that was in the printer, I changed it. The color cartridge usually have color film showing. This one did not it was clear. It still tells me I need to change the color cartridge. Thinking that the cartridge was defective, I changed it again. It is still giving me the message to change the color cartridge. Now the cartridge is locked in and I can't get it out. Can somebody help me?

Thanks!
 

More replies
Answer Match 54.6%

I have a Kodak all-in-one printer ESP3. Originally its "Home Center" software always required confirmation from UAC that it was OK to continue, which was annoying but I learned to live with it.

Today I allowed the Kodak software to update to the latest version; and the software then stopped working. The printer would still print from Word, Excel, and so on, and the Home Center still requested permission to start from UAC, but even once it was running it was still unusable because whatever I selected I just got an error message from it, and I always got an APPCRASH message when I tried to close it. The Home Center software is neded if you want to use the printer as a scanner, or change any of the printer defaults.

Kodak say the only way to cure it is to turn UAC off permanently because their software is not compatible with UAC. Sure enough this cures it - but I wanted to leave UAC on. Have other people had the same problem, and does anybody know if there is a better workaround?

How can Kodak advertise their software as being compatible with Windows Vista and 7, if it is not compatible with UAC?

A:Kodak printer requires UAC to be disabled

Hello Telford.



Did the printer do everything you needed it to before you allowed the update?

11 more replies
Answer Match 54.6%

Hi all! I have a Kodak ESP3 all in one printer. I purchased it about 5 years ago and after printing one test sheet it stopped working and I kept putting off it's repair. Now, 5 years later, I'm starting Uni and I really need it! I managed to removed the paper that was jammed and tried to print but with each printing attempt, an error message pops up saying there's a software communication error. I don't really know where to begin or what to do. The USB cable is plugged into the tower, so it's not that. Any help would be very much appreciated! Thanks
 

More replies
Answer Match 54.6%

I have been unable to print using Bluetooth connection. When I use the Kodak Printer Dock Configuration Utility (must be hard wired with USB cable), and I select Bluetooth as the preferred commo device, the Dock reverts automatically back to WiFi. Has anyone ever connected with Bluetooth and successfully printed any pics? Would appreciate any assistance possible ... Kodak not very helpful.
 

More replies
Answer Match 54.6%

I run windows vista home premium I have a kodak 5300 all in one.
Every thing works fine except when I try to scan a document in to the computer I get an error
Error code 1-2008 kodak says it's a microsoft error.

A:kodak 5300 printer error

Hi robertmcp and welcome to Vista Forums

Not sure what you mean by this error code, but here is a link to the Kodak support page for your printer/scanner: KODAK EASYSHARE 5300 All-in-One Printer Support. It is possible that you may solve the error by updating the driver and/or the firmware via this link, but take note of the warning (firmware upgrade) and download time (driver): KODAK EASYSHARE 5300 All-in-One Printer Downloads and Upgrades. If you choose the firmware upgrade, then please note that you carry this out AT YOUR OWN RISK.

7 more replies
Answer Match 54.6%

When I switch on the printer I get an error mesage 3533 saying there is a paper jam. I have checked the paper path and there is no jammed paper. If I press the OK button the printer loads a sheet of paper and passes it through the printer. I have checked the Kodak Support web site for this error and carried out their suggested solutions without any success. I have unistalled the printer software and reinstalled it - still without success. I am at a loss what to do next- throw it away perhaps!
 

A:Kodak ESP C110 Printer Problem

there maybe a tiny bit of paper stuck - but i have to say , i have had a few kodak printers that have paper issues - and had them replaced under warranty - had a couple of clients who just wanted them changed to a different make
I have one and it works really well

is it under warranty
 

3 more replies
Answer Match 54.6%

Windows XP, 384MB RAM, AMD Athlon Processor 805 MHz.

Have operated this system for 8 months after purchasing Kodak ESP AiO-3
until it would not scan.
Receiving Error 1-2036.
Kodak "Help" after lengthy discussion, requires I increase RAM to 512MB.
The carton information at the point of purchase indicated 128MB RAM required. Not 512MB.
Kodak sent a new installation disk Version 4.2. No improvement and Windows dialog box says the software is not recognized by Windows.
Most of the time, installation is OK until installing Printer Drivers.
Thanks in advance for any info available.
Dutch6
 

More replies
Answer Match 54.6%

Need some help on this.

I have a Kodak Easyshare printer and it doesn't print anything I send to it.

As far as I know everything is correct. I'm figuring it's some kind of driver problem, but I don't even know where to start.

it's connected to a Computer running Win98SE
 

A:Kodak Eayshare printer not working

8 more replies
Answer Match 54.6%

Anyone know where i can get a driver for this printer?

A:Kodak Pro 1400 Printer 64 bit Driver

Kodak Tech support tells me there isn't one. He suggested installing the printer on a 32-bit machine (which apparently does work) and sharing it.

1 more replies
Answer Match 54.6%

I'm having problems with my Kodak ESP 3250 after a clean install of Vista 64-bit.

My first install had no problems with the printer. I simply turned it on and vista automatically detected it and installed everything perfectly. Unfortunately I recently ran into problems and had to do a clean install.

I have re-installed in exactly the same way but no matter what I try this time it won't install.

Going the automatic route fails to find any drivers.

When I go to the Kodak website and download them, they cannot find the printer. When I point Windows in the direction of the drivers I have downloaded when installing it does not accept them.

Similarly when I go to control panel-> add printer and select my exact model from the list I get the error message:

?Printer driver was not installed.
Operation could not be completed (error 0x00000002)?

I would really appreciate any help...I've wasted hours trying to solve this!
Carl

More replies
Answer Match 54.6%

Join Date: Feb 2009

Vista x64
1 posts






I have a new Kodak [COLOR=#3676A2 ! important][COLOR=#3676A2 ! important]printer[/color][/color] and a new laptop but I cannot connect to the printer. When I search for it...it appears in my network but when I try to add it it says that it will not [COLOR=#3676A2 ! important][COLOR=#3676A2 ! important]print[/color][/color] to printer. I reloaded the software and it just sits there and searches for
the printer. My wife has the same new laptop as I and hers will print so I know
it is not the printer

Can anyone suggest anything. I tried to change the printer sharing under discovery and it is grayed in so I cannot change it

This is what the error says: as I mentioned earlier, my wifes laptop works fine Operation could not be completed (error 0x00000709) make sure that you have typed the name correctly and the printer is connected to the network.

Any help will be appreciated

More replies
Answer Match 54.6%

Has Kodak updated the drivers yet for Win7?

A:Kodak 5300 all in one printer update

There are no W7 drivers listed on the Kodak website for your printer, sorry.

2 more replies
Answer Match 54.6%

My computer sees it in the add printer wizard.
It's a Kodak ESP 7.
The Printer: is blank I am supposed to type something there but what I don't know.
I click on both the listing for the printer in the shared printers section:
KODAKAiO and then I click on the KODAKESP7_0696
I have clicked next both times and I get this error
You need to specify a valid network printer name. (I don't know what to type in that box when I first set it up.)

I gave up added added it via USB , but this is not how we want to use it.
We have three computers that need to work with it.

I am using a AMD XP Processor
with 512mb+ DDR SDRAM memory

Our router recognizes the printer and the printer recognizes the router.

I have posted my dilemma to Kodak but have not heard back yet.

Thanks,
Vera
 

More replies
Answer Match 53.76%

my printer say its connected my computer says its not connected
 

A:connecting my kodak printer to my desk top computer

7 more replies
Answer Match 53.76%

Hi
I purchased a kodak esp 1.2 aio wireless printer all in one 2 months ago from curry's and have not been able to get my computer to recognise my above printer
My lap top is an acer aspire v3-571 windows 7 .64 bit
My connection to skyf63 is 80%
every time I try printer wizard with or with out the kodak disc It will not show any printer on my computer
I get error OxOOOOOO57 i have twice tried restore which did not help
I purchased both regclean and Advance Driver from systweak not helping

If any one replies please note I am 84 years of age and just learning computers so please try and keep it simple

both Curry's and Kodak of no help

Regards
Len
 

A:computer will not reconise kodak wireles printer

do you have any other pcs that are able to connect to the printer

this shows you how to connect to the wireless router
http://resources.kodak.com/support/shtml/en/manuals/urg01381/urg01381c2s1.shtml

whats the make and model of your wireless router

i would suggest you do this first and post back the information from the network settings on the printer
taken from the above link - bottom of the page

Printing the network configuration
To print the current network configuration:
Load plain paper into the printer. (See Loading plain paper.)
Press home
Press to select Network Settings, then press OK.
Press to select Print Network Configuration, then press OK.

then we can at least check if the printer is connected OK first
 

3 more replies
Answer Match 53.76%

My daugher in law has a Koda Easy Share camera and printer dock 6000. She also has an HP all in one printer/scanner. They both use usb plugs to connect to the computer. She had an older HP with two USB ports and could never get the two to work together. One had to be unplugged for the other to work. I gave her a two year old Dell with 4 usb ports. She still has the same problem. I am not real familiar with usb ports, but if your computer has more than one, shouldn't you be able to use them? Thank you for any advice.
 

A:Kodak EasyShare Printer dock/usb problem

I have 6 USB ports and something is plugged into each of them. They all seem to work fine together.

Multi-units seem to have problems more than most other devices. If you haven’t already done it, download the latest driver from HP. You will have to uninstall the old software before installing it.
 

2 more replies
Answer Match 53.76%

I recently upgraded to Windows 8.1 and had to reinstall my printer which is a Kodak Hero 2.2 using wireless connection.
The installation repeatedly failed and eventually Kodak support had a go using their remote access system - and they failed too. It would be very useful to know if anyone has succeeded in installing a Hero 2.2 in the latest Windows 8.1 os.
Thabnks
Ron

More replies
Answer Match 53.76%

Hello ... I have a Kokak all in one ESP C315 printer. I now have Windows 8. Seems that everytime I want to print something , I get a printer communication error.... or... printer keeps " spooling " and doesn't print... just goes to the que. If I turn off the printer and restart my computer.... it will work. It is connected via a USB cable. Very frustrating
Any ideas ????
Thanks
Craig
 

A:Kodak All in one printer ESP C315 connection problems

Kodak ESP C315 Support
 

2 more replies
Answer Match 53.76%

My Kodak printer has been working wonderfully till today. It has started printing out in purple. I have cleaned the printer head twice. It helped for about 3 pictures than started again. The color cartridge is getting low, but I have never had it do this when it got low before, it has always printed beautifully till the cartridge ran out completely.

Has anyone else had this problem, and if so, how did you solve it? I'm hoping it's not something major, I love this printer. Please let me know if you can help.

Thanks.
 

A:Help with Kodak Easy Share 5300 printer

I don't understand what you mean by color cartridge? Kodak says there are 6 of them on that model. Surely it must have a way for you to check the levels doesn't it? To me it sounds like the black one is empty but who knows. It's definitely a ink supply problem though.
 

1 more replies
Answer Match 53.76%

Hi,
I have been trying to figure out and find any help on forums with Kodak and Microsoft/Windows. I am trying to scan pictures with my Kodak AiO 5300 printer to a file on my computer, (Dell Dimension Windows XP Home Edition). When I try to do this I get this pop-up
"Please wait while Windows configures center" and it progresses to load and then stops at 3 seconds remaining. Then I get a pop-up that states:

<<THE FEATURE YOU ARE TRYING TO USE IS ON A NETWORK RESOURCE THAT IS UNAVAILABLE. CLICK OK TO TRY AGAIN OR ENTER AN ALTERNATIVE PATH TO A FOLDER CONTAINING THE INSTALLATION PACKAGE 'CENTER.MSI' IN THE BOX BELOW.>>

I did a search in files and folders and came up with:

<<C:\DocumentsandSettings\AllUsers\ApplicationData\Kodak\EasyShareSetup\printer\center refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet on your network, and then try again. If it still cannot be located, the information might have been moved to a different location.>>

After all this I decided to do a search on my whole computer for this 'center.msi' installation package. I came up with nothing. There is nothing on my computer with this program or whatever the heck it is.

I have contacted Kodak tech suppport and Microsoft Windows tech support. They are both saying it is the other's problem. My que... Read more

A:Missing Installation Package?? Kodak Printer

16 more replies
Answer Match 53.76%

Sorry if this is in the wrong place on the Forum, but I could do with some advice or feedback.

In June 2012 I bought a Kodak Hero 5.1 Inkjet printer. I chose this because I was impressed by reviews and the fact that Kodak insists its ink prices are the lowest.

We don't use the printer that frequently and so I was very disappointed that the first set of cartridges ran out after only about 60 pages (standard text, no photos).
I contacted Kodak Help Desk (in India I think!) who said it may be because the printer came with partially full cartridges.
I reluctantly accepted this and spent the money (approx Ł22) to get another Black and Colour cartridge.

This time, I got approximately 90 pages out of the full kit.

I contacted Kodak again and explained I was unhappy. I even printed off a test page which alleged I'd actually printed 199 pages (not true!). I was told that I should print in 'draft mode' so that I'd use less ink. I complained that their marketing material doesn't say you should have to do this. They gave me a Reference Number and asked me to monitor the situation.
Again I spent another Ł22 and kept a record of pages printed .

A few months later, I was on the phone to them again. This time, I'd managed to get 114 pages (even though the Test Page reckons I'd printed 200. I again went through the issues and even calculated the cost per page (which was ridiculously high, even if I'd printed 200 pages).
This time, the guy on... Read more

A:Very poor printer ink usage - Kodak Hero 5.1

8 more replies
Answer Match 53.76%

I'm running Windows XP SP3. I've just purchased a Kodak ESP 3250 printer, and I have installed all the software, but when it comes to the part where I have to connect the USB cable, I do, but it fails to detect any printer. When I connect the USB without the software, Windows detects it as a new device, and says it is installed and ready to use. It then shows up in Device Manager without the yellow exclamation point under the name, "Unknown Device". I've tried to "add new printer" and assign the unknown device the drivers but nothing works.

I was talking with Kodak support for over an hour and they just gave me the basic, re-install, re-connect script to no avail.

I should also point out that the installation CD it came with was faulty. This included the software version 4.2. Instead I went to the Kodak website and they only had the latest driver version of 5.1 which doesn't seem to detect my printer. Could this be the issue? I've tried to find a previous driver on the net (namely 4.2) but to no avail. Or is this maybe a problem with Windows or my Motherboard drivers? do I need to install something that will make the plug & play work? I'm not sure and I feel like I've tried everything.

Thanks in advance for any help.
 

A:Kodak ESP 3250 Printer Problem - Won't Detect

Hi UncleRaj,
Can you try another computer or at least another USB?
There is always a change that your printer isn't working as it should. It should still be under warranty.
 

2 more replies
Answer Match 53.76%

Any help on connecting a wireless Kodak printer to a Toshiba laptop with Windows 10.  The laptop does not find it.

More replies
Answer Match 53.76%

hello everyone!

I just signed up because I need some serious help, im goin crazy with my problem.

Well to start, I have a 'Easyshare printer dock 6000' hooked up to my computer via usb.
I havn't use it in a long time, and I tried to transfer some images from my camera to my computer earlier today. But I got a message saying USB device not recognized, and it wouldn't connect.
Then I tried to manually install it from the the control panel by 'add new hardware', and it just tells me that its working fine. Oh and it won't let me print from the computer either, even tho it gives me the option to.....it just tells me 'error printing'

now if i just put the camera on the dock, and use the buttons to print that works fine, i can do that.....the main problem is the computer not recognizing it.

The only software that came with it is 'kodak easyshare software' and i don't think that has anything to do with it really.....

I'd appreciate any help, this is drivin me crazy< I don't know how to fix it.
 

A:kodak printer dock drivin me insane!!!

9 more replies
Answer Match 53.76%

hi i have installed everything in my computer it printed worked really good but when i tured everything off then got back on a few days later the printer would not print it keeps saying its disconnect but everything is connect.so if u can please help me.i really need my printer.thank you.
 

A:Solved: having problems with kodak 5300 printer please help

my wife posted earlier post.I have Kodak 5300 and when I installed it.It worked fine but when I turn off the printer and computer the printer no longer responds running xp in a dell dimension 3000 I just don't under stand it.The printer is set default and there are no ghost printer I have removed the driver and all file that relate to the printer I was just hoping someone can tell me is it the software or the driver.Printer works with mac or windows I just don't know:-(
 

1 more replies
Answer Match 53.34%

I am trying to install the title device on a Win 7 computer. Kodak no longer supports the device. I have installed a new driver but my system does not even recognize the hardware when connected or the original install disc last used on a Vista machine. I seem to have found a way to unzip and have a valid current driver available but unless the machine recognizes the hardware I cannot proceed.
 

A:Solved: Installing Kodak printer dock series 3

First and foremost, follow the manufacturers instructions for installation. Performing steps out of order can often result in devices not working or not working properly. If you don't have the User Manual, you can get it here: http://resources.kodak.com/support/pdf/en/manuals/urg00367/PD3_GLB_en.pdf

Lack of device recognition, would seem to indicate a hardware fault. Either the device itself, the cable, or the computer/USB port. Even without drivers installed, Windows should recognize hardware is connected.

Uninstall the software/drivers, reboot, and install again.

Try using a different port and/or a different computer.
 

3 more replies
Answer Match 53.34%

My friend has a Kodal 5250 ESP all in one printer and has had it installed on a desktop and a laptop. It only ever printed when the desktop was on, and now that the desktop has died, she tried to uninstall the printer from the hp laptop (notebook) and re-install on just the laptop but it cannot find the appropriate driver. Kodal have tried to help on the phone but to no avail. They sugfgested contacting HP but it is out of guarantee and no free felp. She has been unable to install the printer either by ethernet or wi fi. It gets to the last part of the installation and a x appears. In the printer area of Control Panel there is an exclamation mark by the printer. She cannot make it the default printer. Originally the desktop was on ethernet and the laptop on wi fi. Any clues.
 

A:Cannot uninstall and reinstall Kodak printer using disk and web site.

What operating system is the PC she is trying to install it on using? I'm assuming you have, but have you checked out Kodak's website for drivers? http://www.kodak.com/global/mul/service/index.html?reqURL=http://support.en.kodak.com/app/home/src/gosupport

Also, how is she trying to connect it now? USB or Wi-Fi again?
 

2 more replies
Answer Match 53.34%

We recently moved to another location in the same city, but when I went to try to print from my Gateway Laptop on the Kodak 7250 printer, it says that the printer is disconnected. I have restarted the computer, turned the printer off waited and then turned it back on and have turned off the router and then turned it back on. In the printer tools section of the printer info, it lists the printer but then says disconnected beside it. I don't know what to do to fix this and I have tried a few things that were listed on the internet such as downloading new firmware for the printer but I don't know how to do that for the Cox Cable Router which was a suggestion.
 

A:Kodak 7250 won't print from wireless, says printer disconnected,

have you reset the kodak up on the new network - how is the kodak setup - fixed IP or to use DHCP
have a look at the network settings for the printer

and then on a PC post back here an ipconfig /all

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

We would like to see the results from an ipconfig /all - post back the results in a reply here.

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results into notepad and then automatically open the notepad and display on your screen.

Now all you need to do is copy and paste those results into a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will now be highlighted
Next
From the notepad menu - choose Edit - Copy

Now go back to the fo... Read more

1 more replies
Answer Match 53.34%

Hi, I would like to print out some old pictures that are either in my Kodak album on the computer, or got transferred to PICASA.

I cannot print any of the pictures unless they are still in the camera WHICH THEY ARE NO LONGER.

is there a way to print pictures using my Kodak printer dock?

Thank you.
 

A:Solved: Kodak Easy Share Printer Dock

13 more replies
Answer Match 53.34%

I have a kodak dx4530 & the easyshare printer dock 4000.
I cannot seem to get the printer loaded into my computer.
I have tried everything over the past 2 months.
When i try to print pictures it goes right to my printer and
dosent give me the option,to pick a printer.
I have removed and reinstalled the software.
I have logged on my computer as the administrator.
I have tried updated the software from the kodak website.
I just cannot seem to find out what the problem is.
 

A:KODAK DX4530 & EASYSHARE PRINTER DOCK 4000

"I have tried everything over the past 2 months."

This has been going on for two months?

Have you tried printing from any other programs?

buck
 

2 more replies
Answer Match 52.92%

I have an HP LaserJet 1020 attached to a WinXP Pro workstation via USB. I have an Intel iMac networked with the PC wirelessly. I can detect the LaserJet on the iMac just fine, and on the iMac, documents spool and even say they have printed (they show up in the "completed" section of the printer control panel).

So, the iMac thinks the document printed, but it never did. When I look at the print queue on the Windows machine, I see "Remote Downlevel Document" in it. I assume that the iMac is printing to a port instead of starting the Windows Print Spooler, and this is why it is showing up with this name.

When viewing the LaserJet's queue on WinXP, the downlevel document is "Printing," and "113k/113k" has been transferred. But the document never prints - if I try to "cancel" the document in the Windows print queue, it says "deleting" for a verrrrry long time. Documents can be printed just fine locally on the Windows workstation.

Thanks in advance!
 

A:Shared Printer says "completed," but no page printed

are you using windows workgroup printing? How are you connecting to the printer?
 

2 more replies
Answer Match 52.5%

I am having trouble connecting via wireless a Kodak ESP 5250 to a Linksys E1200 Router.

I am using the printer console controls to configure the printer.

I have verified that the password string is correct.
I have changed the Channel to 6 and the encryption method to WPA/WPA2 Personal.
The printer is configured to use DHCP to obtain and IP address.

The problem that I am experiencing is that the printer is not getting far enough in the connection process to attempt to obtain an IP address.

Tis printer was previously connected to a Belkin Router using WPA/WPA2 TKIP. But the Linksys router does not support selecting TKIP.

I am not to the point that I can connect a computer (via wireless) to the printer. I have a computer connected via USB cable and that works well.

Any ideas will be appreciated.
 

A:Connect Kodak ESP 5250 Printer to Linksys E1200 Router

try no wireless security and also try a fixed IP / Subnet / default gateway

post an ipconfig /all from a network working PC

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------
 

1 more replies
Answer Match 52.5%

I am trying to help an elderly neighbour who is having problems.

He bought a Kodak C315 printer in September last year and used it without a problem for 5 months but then it stopped working giving no error message.

I deleted the printer, ran the kodak clear software and then reinstalled it which appeared to be a complete success. Windows said everything installed OK including drivers and it's ready with a green tick. Windows also shows it as a correctly installed printer but if you ask for printer properties it says printer driver not installed and we can't print or scan anything.

If you click on update device driver and choose the Kodak driver directory the printer model is listed but then on attempting to install the driver windows says it encountered a problem, "No driver selected for the device information set or element"? Tried everything including the latest software with drivers from the kodak website which windows and the kodak software say install correctly and everything working OK. But it will not print or scan and windows just keeps saying drivers not installed when asking for printer properties despite both the Kodak software and Windows saying the printer was installed successfully and is ready.

He is running Windows 7 ultimate 32bit.

There are no other problems on his PC apart from the printer.

I am at a loss as to what to try next, Kodak tech support ran out of ideas too!

PS.
He even contacted a local computer repair shop and took h... Read more

A:Kodak C315 printer stopped working no error message?

Installing a USB printer can sometimes be bit tricky second time round if you don't first uninstall it's driver, turn off the printer & disconnect it's usb cable from the PC so you are then at the correct stage to re-install just as if you were installing it for the first time as per Kodak's installation instructions. I do know many people have slipped up there when trying to re-install a USB device. They didn't start out with a "clean sheet" and with the device turned off and disconnected.

I don't know what else to suggest if you already did everything properly, other than ditching the Kodak and buying a Canon (the only printer brand that I would have in my office den).
 

2 more replies
Answer Match 52.08%

I am trying to install my new HP psc 1310 series all-in-one - It gets almost all the way thru the set up then give me an error, same thing with Kodak digital camera software.

"Set up has caused an error in MST.DLL

Error 1335 in the cabinet file "CCH.cab"

Internal error 2350

Explorer caused error KERNAL32.DLL- get this at various times when I'm on the internet.

My computer is a Gateway- in May I was having problems with it and their "techs" had me run the resuce disk without telling me that it would wipe everything off my computer-including the pictures of my Granddaughter, my Dad receiving his Korean War Medals-everything!
Thanks for any help you can give me!
 

A:DLL error messages when trying to install new printer software & Kodak camera softwre

The error 1335 can occur if the CD is dirty (fingerprints or scratches) or sometimes can be caused by antivirus software conflicting with the operation of installing (disable AV software while installing).

I feel for you losing all that precious info, but you need to remember though that hard disks fail quite often, and you could lose everything at any time. You need to treat the hard drive as temporary storage only, making sure all precious data is stored on at least one medium outside the PC.
 

1 more replies
Answer Match 50.4%

When I turn my HP LaserJet CP1215 on, on a fresh install of Win 8 Preview the Printer Driver loading icon appears on the taskbar and the green shade goes across as if it's installing correctly. Looking in Control Panel/Printers and devices shows the printer installed and the properties shows the device is working correctly.

However when I try to print in any application no printer is shown, and trying to add a printer runs through the search and finds nothing.

What am I doing wrong? The printer works fine in win 7, any pointers or experiences would be much appreciated.

Thank for reading .. Barry

A:HP printer not installing correctly

I think its the drivers, I had the same problem with my HP C309a. Hp is behind in driver updates, at least for my printer.

10 more replies
Answer Match 50.4%

Hello,

I have an Epson Stylus Colour 680 which is being reported by Win2K as being "configured incorrectly". I am not able to load its drivers because of this. I have no idea what the problem could be, unless I have a cable attached wrongly somewhere.

Its printer port is set at LPT 1.

It's green light comes on and it chugs, then the red light appears.

Any ideas would be gratefully received.

Thanks,
Bye,
Penny.
 

A:Printer Not Configured Correctly

15 more replies
Answer Match 50.4%

I have HP deskjet 697c and when i print, the color blue does not show. I tried cleaning the cartridges several times. I Also tried cleaning the circuitry that you're can't touch with bare fingers as suggested to no avail. I tried printing from MS Word and Excel. I am using XP. Installation showed no errors. It is not the cartridge, because I have another printer (appollo 2200) that uses the same cartridge and I tried the other cartridge in this printer with the same results. I also tried the 697c cartridge in the appollo and the blue worked. Any suggestions?

TIA
 

A:HP printer not printing correctly

Have you tried to run the Align Cartridge in the toolbox? If the colors aren't lineing up just right, you won't get all the colors to show.
 

2 more replies
Answer Match 50.4%

I have an HP Photosmart Premium C309g wireless printer. It is connected wirelessly to my laptop and our home desktop computer. I have been having a few problems with it.

Sometimes, when I send a document to print, nothing happens. Other times it prints but takes ages ie it will take a long time to start printing, then it will start printing a page, maybe pause for a few seconds and then continue and then repeat this pattern. Just yesterday, it was in the middle of printing a document when it suddenly stopped halfway through a page and didn't start up again. The print job was still in the queue as was the print job that was supposed to follow it, but the printer didn't do anything.

Any ideas what's going on? It sounds like it might be a wireless connection problem to me but damned if I know how to fix it.

Thanks.
 

A:Printer not printing correctly

14 more replies
Answer Match 49.98%

I don't want to install Kodak Easyshare on my computer but I have a Kodak Picture CD that insists I install to view pictures. Is there a way to run but not install? Or can I install to put pictures in "Windows Pictures" and then uninstall? or? Thanks for any advice. NS
 

A:run not install kodak easyshare to view kodak CD full of pictures

8 more replies
Answer Match 49.56%

Hi all, my sister was trying to print out a paper for a class of hers but when she tries to it doesn't print correctly! When it prints out the margins are about 2 inches too far in! I moved the file from one of my computers to an other one and printed it again from the other computer on the same same printer, no problem. there's something wrong w/ word because it does not print correctly on computer a but does on computer b. HELP! Thanks.
 

A:Printer does not print correctly when using word

Two things:

Hard drive troubleshooting on computer A:
http://www.thewordexpert.com/cleanyourpc.htm

Word troubleshooting on computer A:
http://www.thewordexpert.com/word.htm
 

2 more replies
Answer Match 49.56%

Have one of the oddest problems I've ever encountered. Have a mail-merge document linked to a query in an Access database. It works perfectly on my computer, but does not work properly on the laptop and printer used by the non-profit client where I installed it. The printer is an HP OfficeJet 6600. Laptop is a Dell.

Thinking the client's letter had become corrupted, I tried copying my copy of the mail-merge letter to the client's laptop. Produces the same result, which is that the letter truncates every line half way across the page. . . as though someone placed a blank piece of paper on the left half of the page to blank it out. The MM letter includes the envelope, so for every record, you get both the addressed envelope and the letter.

In addition, when the MM letter is on screen and you merge it (clicking the "ABC" icon in Office 97-2003), it looks like some parts of the letter are on the envelope. . .but they don't print on the envelope.

The client tells me this is the ONLY MS Word document that does this; all other document print perfectly.

???????????
 

A:Printer not printing ONE document correctly

Try changing drivers on the customers printer. Take another printer to customer (or maybe customer has another printer) to test if drivers don't fix it. Seems the printer is the 'odd man out' here.
 

2 more replies
Answer Match 49.56%

I am trying to print a page within Yahoo mail. I have set to print just the selection I highlighted but the print continues to run off the right side of the page. I am trying to print in the portrait format. How can I get the entire page to print on the first page without running off the page? This is very frustrating. Thank you.
 

A:Setting printer margins correctly

Are you having problems printing from any other web pages? I suggest you cut&paste the info into Word or Notepad and then print.
 

2 more replies
Answer Match 49.56%

When I print from one of my programs it prints OK. When I print a file that I downloaded from on-line it prints what looks like a program for the file. Any ideas? Hope I explained that correct.
 

A:Solved: printer not printing correctly

13 more replies
Answer Match 49.56%

I recently downloaded the latest version of Kodak Easy Share on my computer which is a Dell Dimension 2400 XP. I had trouble getting pictures to computer from Camera. I finally figured it out. Now I can not upload pictures from kodak easyshare program to the kodak gallery so I can order the pictures online. It says it is not available at this time and I should check the firewall settings. Before I downloaded the 8.0 version I had no trouble ordering pictures online.
 

More replies
Answer Match 49.14%

Using a Dell Desktop with XP.

I've had this Canon printer for several years, bought new, and it's been working fine. I usually use grayscale for printing. Awhile back, I replaced the black ink cartridge (OEM) and everything was fine. Recently, I replaced the 3 color cartridges and suddenly my printed page has 1/2 lines and 1/4 lines (as if they've been decapitated) AND lines are skipped, as if I'm printing in triple or double-double spacing. A few lines on the page print correctly, except for the spacing in between. AND where the spacing is, the text is missing--in other words, it's not simply triple space between lines of text, the text is missing where lines are blank or skipped.

I have been browsing and searching for answers, but all I can find is 'do tests' and clean the print head. I do not know how to clean the print head, I do not know where it is or how to remove it to clean it.

Also, when I try to print in full color, the page comes through blank. I put the old cartridges back in and got the same results.

I'm sorry, I don't recall if I printed anything successfully since I replaced the cartridges. All I know is one day it was printing fine. The next time I tried to print, the page was skipping letter spaces and line spaces, looking like a foreign language, and when I tried to print something else, I got the line skipping.

By the way, I'm in the USA.
Any help would be much appreciated.
 

A:Canon i560 printer won't print correctly

When they say clean the heads there should be a function in the control panel for that printer where you click clean

I would start by first have you removed the strip that will allow air in from the cartridges

Reseat the Ink cartridges

Uninstall the software for the printer and re-install it

Also some printers will work for a while with oem ink but will stop working
 

1 more replies
Answer Match 49.14%

Hey

After I got my new laptop, my mom had wanted to print a few things off of some websites. After the installation of my Printer (HP Officejet V40) onto my new laptop (HP Pavilion g7-2010nr Notebook PC), I tried printing those things. But there were always problems with each of the printing attempts.

1. There was always an error in the Printing Queue that didn't let me print anything.
2. When I printed off of Google Chrome, one or more of the pages would be skipped unless it was the last line or so at the bottom.
3. The sites don't print out correctly sometimes or the printer stops suddenly after 1-2 pages
4. At the end sometimes it just randomly ejects a blank sheet.

I've tried using the troubleshooter and it says it is fixed, but the errors keep happening. I don't know if I should get a new printer or not..because school is in 2 weeks for me and I need a printer.

A:Printer not functioning correctly on new HP Pavilion g7 Notebook.

See This post, many have the same/similar problems.

Incomplete print jobs with HP Officejet v40 and Windows 7 - HP Support Forum

8 more replies
Answer Match 48.72%

Hi Guys,

I've narrowed down my reserach to 3 cameras (Canon-S1-IS, Kodak-DX-7590, Kodak-DX-7440).....I've searched on internet and these are the cons

Kodak-dx-7440 : Low optical zoom (ok for me)

Kodak-dx-7590 : No image stablization

Canon-S1-IS : very bad Indoor/lowlight focusing, EVF freezes, comes with alkaline batteries, too small LCD, bad focusing overall

Now my requirements are -

1) Family events/parties (mostly outdoor night, low light, low light indoor shots),

2) Sight seeing (mostly daylight shots of monuments, buildings etc, can be night shots too like of Times Square NYC),

I want to use automatic settings and my top priority is to get good shots in a variety of light conditions all at some automatic (without having to fiddle around with the complex settings, although I'll learn them later on). As for the 10x zoom, I'm just considering it for fun right now, but if the cams with zoom don't perform well in low light / bright light conditions in automatic mode then I'll leave them. I'm not planning to buy a tripod or do bird watching or do wild life shooting etc, my shots will be around family events, indoors and sight seeing types mostly.

Please suggest which one of the above 3 cams would be the best for these requirements.

Thanks in advance.
 

A:Canon-S1-IS or Kodak-DX-7590 or Kodak-DX-7440

From what you say the 7440 sounds like what you need. The 33mm wide angle is wider than most for including more in the shot. The 4X zoom range is good for most photography if you aren’t into wildlife photography. Flash range is adequate.

Jeff at DCRP said this in his review:
“There's a lot to like about the Kodak EasyShare DX7440 -- heck, I even bought one for my mom. It's easy-to-use, very responsive, full-featured, and expandable to boot. The biggest weakness is on the camera is the image quality -- photos were "muddier" that I like to see, especially on things with fine detail like grass or trees. Don't let this scare you off, though. For people like mom who print at 4 x 6 inches or downsize for e-mailing, these are non-issues. "Pixel inspectors" who view the images on-screen at 100%, or those who print larger than 8 x 10 should probably try another camera. The DX7440's photos have vibrant color (perhaps too much so) and very little redeye, and I can attest that they look great when printed.”

He tests almost every camera that comes out, and if he bought one for his mom it is probably a decent and easy to use camera.
http://www.dcresource.com/reviews/kodak/dx7440-review/
 

1 more replies
Answer Match 48.72%

I have a Publisher file (calendar) created by a customer that views fine onscreen, and prints fine to my Canon black and white ImagePress, but when I print to my color copier (Canon T1) the image is partially cut off (the job is supposed to run in color, so I need to print to this machine).

Looks as if the month grid was created in Excel and somehow imported to Publisher as a graphic. Some of the numeral dates are slightly cut off from the right, as if the cell wasn't wide enough to accomodate the text; for example, the numeral 30 - the far right of the 0 is partially missing. I have a call into Canon, but was hoping someone else has overcome this glitch.
 

More replies
Answer Match 48.72%

Hello!

I´m a newbie here, and doesn´t know too much how does function this site, I´ll try to help where I can, but I came here to ask something that is bothering me.

I´ve just bought an Epson Deskjet USB printer (C42 UX) and installed it correctly (it worked alone, when "filling itself")... The problem is using it under my Windows 98 SE OS.

First, I had no USB ports, so I bought also a PCI to USB card adapter and installed it and Win98 could detect it OK.

Second, I tried letting the printer turned on and booting the system. It detected something and installed an "unknown device".
It seemed not important, so I installed the drivers of the printers... but when the driver installation tried to check the printer port it didn´t detect it, and I couldn´t detect it ever since.

After this, I have tried a lot of things... Checking the BIOS to disable any unused port/device... enable anything related to USB (which I had to disable again, ´cause seemed to be an *onboard USB port*, but as it didn´t have the actual ports, I didn´t see).
I also tried to remove the "unknown device" and turn on/install the printer after the boot. And also install it via control panel... but nothing worked.

I tried checking with the Epson support here, but they´ve said that it is a problem with the USB port, so they couldn´t help.
Windows won´t let me install any driver from the Epson CD directly for this device... it says "The specified location does not c... Read more

A:[SOLVED] Deskjet USB printer doesn´t install correctly

16 more replies
Answer Match 47.46%

I purchased a new Kodak All-in-One 5500. Making me crazy, every time I turn it on a pop-up comes up saying I have a camera connected (I don't), and what program do I want to select to "launch"? One of the options (#1) is something called ABBYY FineReader 5.0 Sprint, I have NO idea what that is or where it came from. The other two choices are Kodak & Microsoft, which I at least recognize. Help!..what is this ABBYY thing, and do I want it highlighted as the default choice?
 

A:Kodak Printer & "ABBYY FineReader"

If I'm not mistaken Abbyy FineReader is an OCR program. OCR stands for "Optical Character Recognition". It's used for converting scanned images into editable text.
 

2 more replies
Answer Match 40.32%

This is something that has been bugging me for a while now, and I've been unable to solve this problem. Perhaps someone out there can provide some guidance.

Sometimes, I'm unable to print things (such as online coupons) because I'm told that my printer is set to "Keep Printed Documents." I've tried disabling this setting via the Advanced tab under the printer's properties. However, when I do this, click Apply then OK, and close the tab, the setting automatically reverts back to "Keep Printed Documents". Does anyone know why this is happening? It's sort of frustrating to not be able to set the printer settings the way you choose.

I appreciate any tips/suggestions you might have. Thanks!

Bubba
 

A:Keep Printed Documents

9 more replies
Answer Match 40.32%

How I can change the name that appears at the top of email messages when I print in Outlook 2002?
 

A:Name at top of printed emails

6 more replies
Answer Match 39.9%

I scan a document( on a hp 1315 all in 1) that is 8.5 X 11.00 but when I print it it is 8 X 10.25
how do you get it the original size? I tried resizing it in photo shop but cant get it. I have vuescan but still wont print out 8.5 X 11.00 ???????????????/
 

A:Scanned document when printed out........

16 more replies
Answer Match 39.9%

Whenever I print out an email from someone, the resulting document prints my first and last name (Outook Express) in the top left corner. I would like to orevent this but have searched in the Options and cannot find how it got there or how to permanently remove it. Can someone please tell me. Thank you.
jy
 

A:My name on printed emails not wanted

It is using your user name for the header.
You can change this in the account settings.

Not sure if you can turn this off.
 

2 more replies
Answer Match 39.9%

I have the names Charlie Lori Jo, Printed in the top left hand corner of everything I print.
I don't know how it got there, and dont know how to get rid of it.
Can you help me?
Chuck.
 

A:Solved: Printed name on paper

16 more replies
Answer Match 39.9%

I have searched to find an answer to this problem of faded pictures when printed from windows photo gallery. I have seen a few others having the same problem, but no solutions. I am hoping that someone now can help.

I can print pictures from other software on my computer, from the internet, etc, with great photo quality. When I print from Windows photo gallery they are very light and faded looking. I have made sure the adjustments are for my printer.

It seems that most of the people experiencing this problem had canon printers. Does anyone have a solution to this?

Thanks
Pam

A:faded printed pictures

I have found the solution to this problem, you need to untick the checkbox for "borderless printing", this is how to do it:

SOLUTION:

When you click print, go to Options > Printer Properties

Click on the "Page Setup" tab, then Untick the box that says "Borderless Printing"




I love Myriam the little bunny

1 more replies
Answer Match 39.9%

Hi all,

Well not sure if this is the right area for this but not really sure what the problem is.

When I boot my PC during the bootup dos stage I hear my PC making noises, it still boots up Windows 7 ok but as soon as I open something I get continious R type accross my screen, If I hit the caps lock it changes from R to r.

Thought it was my keyboard having the R locked down so tried to fix it, no luck. Changed keyboards with my spare one no luck. Disconnect all keyboards no luck.

So where is this R coming from, its impossible to us my PC at the moment as soon as you click somewhere (word, exel, Google etc) an R/r appears.

Any ideas where to start?
 

A:Continous R being printed in Windows 7

8 more replies
Answer Match 39.9%

Other than dogging the print preview, and struggling with the size in any pertinent image editing software, has anyone found a reliable way to limit or control the size of a printed web document?
to wit:
I scanned an odd shaped document, 3x8" to email to myself at another site, and the printed form was big enough for two pages. What a waste.
I print receipts regularly and they, 99% of the time have a "trailer" on a last page that has stuff like web site address or URL, a Secure Website emblem, or other, clearly unnecessary printing. My introduction to Windows word processing (WordPerfect) had, and I still use, a "makeitfit" command. Invoking such a command AUTOMATICALLY when printing from the web seems like a simple, brainless way to conserve paper...it'll give me a fractional font (e.g. 11.9 vs. a 12) and would prevent the idiotic tendency of a printed page to only have the leftward 80%, l which leaves off the important stuff like the prices...(you gotta print landscape to avoid this)
And I thought a computer was to make life easier, boy was I ever misled)
 

A:printed size of web documents

The problem is that web pages are usually coded to make them look good on screen, and that tends to make them "unfriendly" when printing.

Web pages designed for printing do exist, and it works well in those (few) cases.

Cutting and pasting into a word processor is sometimes the only workable solution.
 

2 more replies
Answer Match 39.9%

When using my picture it! publishing....when I add a border to a picture it comes out distorted when I print them out. With no border it prints out great.

Any ideas why this is happening?
 

More replies