Tech Problem Aggregator

i want viewsonic VA1912w audio driver

Q: i want viewsonic VA1912w audio driver

i have format the model view sonic VA1912W. i installed but there is no audio driver supporting so please provide audio drivers

A: i want viewsonic VA1912w audio driver

The ViewSonic VA1912W is a monitor, it doesn't have audio drivers. You need drivers for your motherboard's sound chip or sound card. Try the computer manufacturer's website or the motherboard manufacturer's website.

4 more replies
Answer Match 92.82%

im just wondering what refesh rate i should be using? i have my monitor on 1440 by 900 and at the moment i have the refesh rate on 85 hertz.
the problem is my desktop shortcuts flicker every now and then, i loss there picture and then they come back? does this have anything to do with the refesh rate?
 

A:What refesh rate should i use for my Viewsonic VA1912w?

8 more replies
Answer Match 92.82%

I have a ViewSonic 19" TFT monitor after I formating my computer I am not able to get the display setting to 1400x900 i have tried installing the drivers first from the CD provided by viewsonic and then when i was not able to get the correct display i tried to download the drivers from their site as well... however, it didnt help!! Any suggestions???
 

A:ViewSonic VA1912w display problem

download drivers for your video card, the driver for the monitor that you get from the box with the monitor only tells your pc, you have a viewsonic 19" TFT
 

3 more replies
Answer Match 92.82%

Desperately seeking help.

Have a new SonyZ laptop with Vista Business installed. It is clashing with almost everything I've tried to load.

Main problem is trying to connect to an external monitor: Viewsonic VA1912w.

I cannot find any drivers which will let this happen. Earlier posts (some time ago) suggest that the connection was not possible but was expected to be feasible in the near future ie it should be available now.

Can anyone suggest a solution??

Thanks

Cassmob

A:Viewsonic VA1912w and Vista Business

Vista 32 or 64? I had a problem with my video driver and it turned out to be my monitor driver.

I am on Vista Ultima x64 so YMMV... I had to find a x64 Vista driver from a different model model (newer model). Fortunately for me, it worked well and I no longer have the conflict.

I have never heard of this issue with Vista 32 so I have to assume that you also have 64. if not the case... I am stumped!

4 more replies
Answer Match 58.8%

I'm sure it's been asked and re-asked, but I couldn't find the answer. Anybody know where to find the vista x64 compatible drivers for a Viewsonic VX900 Monitor?

Thanks in advance.

A:Viewsonic VX900 Driver for x64

Hello ckylepa,
Try these drivers, they are x64 so should be OK. They have been scanned and are clean.

Standard_Monitor_Driver_Unsigned_x64_070524.exe

Install as admin.
Good luck and post your results.

1 more replies
Answer Match 58.8%

Can Anyone gimme a win7 video driver of viewsonic

A:Need Viewsonic Windows 7 Driver

Read this: Driver Update Windows 7 - How to Update Drivers in Windows 7 - Device Driver Update
ViewSonic Support Information - ViewSonic Drivers - ViewSonic Manuals - ViewSonic Tech Support
cheers

6 more replies
Answer Match 57.96%

Hi Guys, I have no idea whats going on over at Viewsonic, however their support service is lacking some serious SUPPORT!!! Just the other day, I re-installed Vista 64 and had been happily using a x64 monitor driver for my VX2025WM, just before the re-install I decided to trall the net for latest drivers and deleted any old ones I had (stupid I know). Anyway on re-install with the latest unsigned driver - Standard_Monitor_Driver_Unsigned_Windows_x64 - Dated 04/10/2007, it is now telling me it cannot find my monitor. I've also tried the latest signed driver and this is not working either. I have tried a manual install from C:\Viewsonic and funny enough the monitor isn't even listed. I've asked Viewsonic for help with them replying asking me to download the latest unsigned driver (what the???) All I need is a copy of the previous unsigned driver to this one listed and I know 101% it will find my monitor and work, does anyone have it or know where I can find archived drivers, as Viewsonic have not responded to this request. Please help! Cheers in advance.

A:Viewsonic VX2025WM Monitor Driver

Ahh it's always the way... Just found the old (November x64) driver on DriverGuide.com and guess what, it WORKS!!! Tried updating manually to the new driver after I installed the old one and it's displaying a could not install new driver message. Bloody viewsonic, I HATE SUPPORT!!! Why do they treat us like monkeys???

6 more replies
Answer Match 57.96%

Recently downloaded multiple updates from MicroSoft for Vista. After reboot my ViewSonic VG2230 WM settings were lost and the driver now listed in the device manager is for a Generic non-PnP ...

I've tried downloading the correct driver from ViewSonic and tried to use the install CD that came with it, but can't get my system to recognize the monitor or use and of the enhanced features.

Video card is a Nvidia GeForce 8500 GT ... during the attempts to reinstall the monitor driver from CD, I get an error message that says that it could not find "NVCPL.DDL" file. Also says to manually install driver but the system re-boots and changes it back to the generic driver.

Have no idea what to try next ...

More replies
Answer Match 57.96%

I have a ViewSonic 2235 22" LCD. I need to find a driver to allow 1600x1050 resolution. I've been to ViewSonic's site and downloaded their signed and unsigned Vista drivers with no improvement - the closes resolution I have the option of is 1600x1024 or 1600x1200.

I had this monitor working fine with a 1600x1050 resolution. I changed out my motherboard (from an Asus p5w to p5e) and reinstalled Vista - and now I'm unable to get the monitor to the right resolution.
 

A:Solved: ViewSonic Monitor driver

Never mind, problem solved. I needed one additional Nvidia windows update, but was confused because windows said it was current on updates.
 

1 more replies
Answer Match 57.96%

I'm looking for the Vista HP x64 driver for a ViewSonic VX2025wm monitor. This monitor isn't listed on the ViewSonic site any more. I'm having an issue with the EVGA GeForce 9800GT video card that I installed. The card does't see the monitor at all. I have done everything that you can think of including contact with EVGA. I do have service pack 2 installed and the last thing I can do is reinstall the driver for this monior. I don't have the CD with this monitor any more and I'm not sure if there is a generic ViewSonic Vista video driver. Thie video card supports two LCD DVI inputs. My other monitor is a ViewSonic vx2433wm and this is working fine with the card. I've looked on driverguide.com and it's not listed there either. Done a few google searches to but these sites want a $25 fee or something to join to download the driver that doesn't look right either....

A:Vista driver for ViewSonic vx2025wm

Do you get a display, even if the monitor iss not listed there should be some sort of display, even if it is low res low colour.

Do not pay for a driver, as you have already thought it is a rip off.

This may be your answer,

PNY 6600 AGP / Viewsonic vx2025wm monitor - No DVI out - Nvidia - Graphic-Displays

I know it is a different card however, it may work.

1 more replies
Answer Match 57.54%

Dear,
I have Viewsonic P225f CRT monitor. My desktop computer has Microsoft Windows Vista Ultimate 64-Bit operating system. I want driver suitable for 64-bit. I had tried to install unsigned/signed driver from Viewsonic web site but installation encountered problems. I have a gaming system see specifications below, so I want to install Viewsonic monitor driver instead generic driver. I can send you error details as attachment if you mail me link. Kindly solve this driver problem.

Thanks


Processor: Intel Quad Core Extreme Processor QX6700
Motherboard: MSI P6N Diamond Nforce 680i SLI
RAM: Corsair Dominator Quad Kit 4GB DDR 2 1100MHz
Graphic Card: NIVIDIA Geforce 8800 Ultra OC SLI (768MBx2)
Hard Disk: Dual 1000 Giga Seagate 7.11, SATA, 32MB Cache for RAID
Sound Card: Creative X-Fi Fatal1ty
Optical Drive: LG 18X DVD-RW, SATA
Speakers: Creative Gigaworks S750
Power Supply: Enermax Galaxy 1000 Watts SLI
Casing: A-Open QF60
 

More replies
Answer Match 45.36%

I have a Lenovo Thinkpad E550 laptop with Windows 7.

There are no enhancement features in the speakers properties section. I have realtek card reader...do I need realtek driver? I read that not all motherboards use realtek audio chips.

What would be a suitable/compatible FRE audio driver to download to enable louder sound.

More replies
Answer Match 45.36%

I just bought a notebook Lenovo G450 and I had drivers not found problem. My OS is Windows XP SP2. In Device Manager, there are four "Audio Device on High Definition Audio Bus" device with exclamation mark. Below is the link to the screenshot of my device manager (pardon me, you have copy-paste the link manually since my post count is still below 5 so I cannot post link/image here):

There is no sound problem since I had successfully installed the sound driver from lenovo (The name is "Conexant High Definition SmartAudio 221" as you can see on the screenshot above) and the sound is working without problem. I also had installed Microsoft UAA Bus Driver before installing the sound driver.

I had tried installing realtek and nvidia high definition audio driver and all required drivers from lenovo (http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=370748), but still no avail. The four yellow exclamation marks is still exist.

So I need help to identify what actually are the devices that shown as "Audio Device on High Definition Audio Bus"? And where can I get the driver for that devices?

These are the device IDs:

Code:
HDAUDIO\FUNC_01&VEN_10DE&DEV_000B&SUBSYS_10DE0101&REV_1001\5&15CAAF27&0&0001
HDAUDIO\FUNC_01&VEN_10DE&DEV_000B&SUBSYS_10DE0101&REV_1001\5&15CAAF27&0&0101
HDAUDIO\FUNC_01&VEN_10DE&DEV_000B&SUBSYS_10DE0101&REV_1001\5&15CA... Read more

A:Audio Device on High Definition Audio Bus driver not found on Lenovo G450

I'd advise you should first upgrade to SP3. Then report back if you still have the problem and can proceed from there
 

12 more replies
Answer Match 45.36%

Hi,

Got a niggling problem with installing a driver for my onboard sound. I recently bought a motherboard bundle (Nforce 7050M-M) and I have got everything working fine but I just cannot install the driver for this. I'm currently using OS XP SP3.

It seems like I have tried every everthing that i've seen posted on a similar problem. I have all the latest drivers for windows, motherboard & Bios.

When I first had the problem it was a code 39 error on the device manager, now its a code 1 error (i'm can't rembmer at what point this changed as i've tried so many things).

Does anyone have solution for this problem?

Please help, thanks.

More replies
Answer Match 45.36%

I am running Windows 7 Home Premium on my Dell Inspiron E1505.

I have had no problems with it for several years; however, recently my computer has booted with a red 'X' on my audio and tells me that "No Audio Output Device is Installed." I checked my Drivers and my High Definition Sound and 2 Base System Device drivers have Yellow Question Marks by them. I tried to update the drivers manually but it says Windows Cannot Find Support for your Base System Device and it says my High Definition Audio is already up to date. I have also tried uninstalling the drivers and rebooting Windows to let the system automatically search and update the drivers. This too has failed. I do not have my Windows 7 disc available at the moment to be able to do a clean install.

Any help you could give would be greatly appreciated.
 

A:No Audio; Driver Downloads Fail and No Audio Output Device Installed

http://www.dell.com/support/drivers/us/en/19/Product/inspiron-e1505

Dell link to driver downloads. Start there for now.
 

1 more replies
Answer Match 45.36%

Hi there, I have audio problem in my HP Pavillion G6 2254ca laptop. Audio not working after the upgrade to Win10.1Hence i have uninstalled all the related Audio drivers, and restarted the machine. System default audio drrives were installed automatically and audio started working. But the sound is too low.When I tried installing the 'Dolby Adavnce Audio driver', its errored out as incompatible. Also i coudnt find the compatible version in HP website. Can you please help, as the audio input/output is too low. Need advice to install the compatible version for Dolby Advance Audio driver. Regards, Ram

A:Audio Driver - Dolby Advance Audio v2 - Issues in HP Pavilli...

Hi, Please try:    http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_151294_1 Regards.

1 more replies
Answer Match 45.36%

Hi Friends.
Which audio driver is suitable for 82801 G (ICH Family) High definition audio Multi media?

I have installed realtek audio driver. Its in C: drive program files. But not showing in

My computer -> properties -> hardware -> device manager -> sound, video and game controllers.
ain't getting system default sounds too.

How can i install Realtek audio driver software under sound, video and game controllers?
Or is there any other suitable driver? and How can i install it?
Please help ...
P.S - PC Configuration : Core 2 Duo processor, 512 MB DDR2 RAM, 160 GB HDD.
 

More replies
Answer Match 44.94%

I had posted this topic in the windows xp forums but couldn't find a solution, So I'm hoping maybe I can find it in this forum. I had to reinstall my operating system which is Windows XP service pack3. I have a Dell XPS630i desktop computer. I have the drivers and utilities cd that originally came with the computer. On the disk are instructions on the order of driver installations. I installed everything as it said but when I go into device manager I see the yellow question mark next to audio device on high definition audio bus. I've tried uninstalling and reinstalling the audio drivers, I've found the driver on Realtek's website and downloaded it but still no sound. The Windows software wizard also couldn't find anything for it either. Audio type is HDA 7.1 channel. The driver is Realtek audio ALC888 HD audio. The driver on the dell website is the same one I have with the disk. If anyone could help I'd greatly appreciate it

More replies
Answer Match 44.94%

My computer speakers went out about a week ago for no reason. The computer says that they are functioning properly but I have literally no sound exiting from my speakers. I decided to update the audio driver software under the general "guidance" of Microsoft Tech Support, but after going through the process I still have no sound, and you have to pay to get assistance of any kind from Microsoft corp. HELP!!! Any help would be nice because I love my computer...
 

A:Solved: I have Updated my audio Driver software, and I still have no audio!

13 more replies
Answer Match 44.94%

hello everyone:

i looked in on seven forums trying to find a fix for my driver problem, a lot of friends here were helpfull, i like to give back a little even if my pc is working fine now.

my pc is a desktop running windows 7 pro, motherboard esc a780gm-a, i had a problem with my hd audio driver, under my control panel audio device i only could see "no audio device installed" even when i installed it 10 times, i also saw on my right conner "no audio output installed"

i had a logitech camera installed.

the fix:
i found that my logitech camera was somehow in conflict with my audio device, it kep telling me "communication mic ???" something like that, well after uninstall the logitech camera software my audio came back and its now working perfect.

i hope this helps.

check if you have a camera with a built in mic, this might be your problem.
thank you all.

A:HD audio driver fixed-no output audio installed

Welcome to Seven Forums ruddy17. Thanks for posting, it may help someone. A Guy

1 more replies
Answer Match 44.94%

Hi,

I have just installed the audio driver for my motherboard, restarted the computer and it seems that driver doesn't do anything at all. I have the speaker icon in the tray bar with a red 'x' on it, and it says: "No Audio Output Device is installed". Why is that? I tried the driver that's on the motherboard CD and also the one from Realtek's website, and while they are different versions, the problem is identical.

Please advise.
 

A:Solved: 'no audio devices' after installing audio driver

You have posted in Windows 7 forum but your spec says
OS: Windows Vista
Motherboard: GIGABYTE GA-P35C-DS3R
CPU: Intel Core 2 Quad Q6600
RAM: Kingston 2GB DDR2 667Mhz
Graphics Card: ATI Radeon HD2400XT
2. Is it the same system please but with 7, if NOT please post the spec
3. What does device manager show please for sound - on the entry there
 

3 more replies
Answer Match 44.94%

I tried to update this driver (Audio Device on High Definition Audio Bus) on my computer, but I receive an error every time. It has a yellow exclamation mark by it. I have windows 10 and a Dell Inspiron 15-3521. It shows under "other devices" in my device manager, but should be under "sound, video, and game controllers." The device status is:The drivers for this device are not installed. (Code 28)Data error (cyclic redundancy check).To find a driver for this device, click Update Driver.How can I fix this error? 

More replies
Answer Match 44.94%

I tried to update this driver (Audio Device on High Definition Audio Bus) on my computer, but I receive an error every time. It has a yellow exclamation mark by it. The reason I want this to function is so I can have sound come out of my TV when I plug in my HDMI. When I try to update it  I get a Intel(R) Display Audio Data Error. I have windows 10 and a Dell Inspiron 15-3521. It shows under "other devices" in my device manager, but should be under "sound, video, and game controllers." The device status is:The drivers for this device are not installed. (Code 28)Data error (cyclic redundancy check).To find a driver for this device, click Update Driver.

How can I fix this error? 

More replies
Answer Match 44.94%

I just had to reinstall my operating system which is Windows XP service pack3. I have a Dell XPS630i desktop computer. I have the drivers and utilities cd that originally came with the computer. On the disk are instructions on the order of driver installations. I installed everything as it said but when I go into device manager I see the yellow question mark next to audio device on high definition audio bus. I've tried uninstalling and reinstalling the audio drivers, I've found the driver on Realtek's website and downloaded it but still no sound. I tried going into the BIOS and disabling the onboard audio. When I did this the audio device was no longer showing in device manager but the sound wasn't working. The Windows software wizard also couldn't find anything for it either. Audio type is HDA 7.1 channel. The driver is Realtek audio ALC888 HD audio. The driver on the dell website is the same one I have with the disk. If anyone could help I'd greatly appreciate it

A:audio device on high definition audio bus driver

http://support.dell.com/support/edocs/SYSTEMS/xps630i/en/OM/HTML/software.htm#wp1111996You followed the above Dell instructions?See Sound and Speaker Problems at http://support.dell.com/support/edocs/SYSTEMS/xps630i/en/OM/HTML/trouble.htm#wp1092170 .FWIW: System Drivers at http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&SystemID=XPS_630I&os=WW1&osl=en&catid=&impid=FWIW: Disabling onboard sound...is not what you want to do, unless you are using a physical soundcard in lieu of the sound capability provided on the motherboard. You have onboard sound.Device Manager only reflects the one problem you mentioned?Louis

3 more replies
Answer Match 44.94%

I installed my graphics card but the NVidia hd audio driver wont install I tried clean reinstall with driver signature removed and all
It only installs the Microsoft driver I tried extracting the .inf for it and manually install but I get a not compatible with windows message.
Any helps appreciated

A:Nvidia HD audio and Microsoft hd audio Driver problem

Hi tice1231

Could you possibly tell us the exact Video card you are using. Maker and Model?

Is this the correct one? zotac synergy edition 4gb GT630? 650?

EDIT:

I see you have your own soundblaster Audio card? Does the motherboard have onboard sound card? If so, try disabling the onboard sound in the BIOS. See if that helps.

3 more replies
Answer Match 44.52%

Ok, I have a reasonable knowlage of computers, i have spent the last 4 days trying to fix my Phillips PSC805 Auruilium sound card.

I have recently put more ram in and a new video card (NVIDIA Gforce2 MX 100/200) its no the greatest but i cant afford new ones.I am running Windows XP professional. I have had the sound card and speakers for almost 2 years and they have worked fine untill this new hardware was put in.

straight after these were put in, My sound card went dysfunctional. it has power, but the aurulium sound agent 2 program will not install completely. it will begin to install but before long it will say, VDI32.exe has encountered a problem and must shut down. after that an error message appears saying "failed to obtain 805 bus interface" and directly after that "805 Registration failed!"

after this i attempt to open aurilum sound agent 2 and it states that "The QVE bus driver is not detected! Reinstall the Qsound virtual audio devices bus enumerator driver."

this message is also displayed on startup of my computer.

I am in desperate need of some help, Its driving me crazy. it also seems to be affecting other applications on my computer.

Please help.

Thankyou.

VV
 

More replies
Answer Match 44.1%

im using now a sound driver default "High Definition Audio Device"Driver
do i need to uninstall it first before changing to realtek sound drivers??
and how do i uninstall it in safest way??and was there an option to undo if something goes wrong??

im using windows 7 ultimate 32bit. ..

A:Asking :SOUND DRIVER High Definition Audio Device Driver

That is the default Windows audio driver, and I don't think it can be uninstalled. Best is to not worry about it and just install the Realtek driver.






Quote:
and was there an option to undo if something goes wrong??


Uninstall the Realtek driver or do a system restore to before you installed it.

1 more replies
Answer Match 44.1%

Hey,

I use a Dell notebook inspiron 15, windows 7. Yesterday i was watching my files and programs. I deleted some programs i never use. At some moment, i saw a program called IDT audio. I thought it was a download which i never used, so i deleted it. However, when i watched a video, there was no sound. Realising that I removed the driver, i tried several system restores. It didn't work so i just tried downloading IDT audio again. Despite the fact i couldn't find it in my files, it was selected as audio driver, with a yellow triangle though. It still doesn't work.. I don't know what i should do next?

Thanks

A:Accidentally deleted audio driver IDT audio.

In Device Manager click on it and then Driver Tab, update Automatically.

If it is not loaded from PC or WIndows Updates after several tries, go to the Support Downloads webpage for your Dell Tag number, download and install the driver.

4 more replies
Answer Match 43.68%

Hi All,

I wiped out manufactory-installed Win Vista of my new Laptop Gateway M6752, and installed Win XP SP2 Home Edition. I window-updated, but could not get the IDT SigmaTel High Definition Audio CODEC to work. I downloaded a few generic SigmaTel drivers, but keeps get error messages and yellow marks. I also need driver for the TopDog Mini-PCI express Wireless 802.11n LAN .

Thanks,
JL
 

A:SigmaTel Hi Def. audio driver and Wireless LAN driver needed

Have you tried using windows vista drivers for your audio and wireless? sometimes they may work
 

1 more replies
Answer Match 43.68%

Hi All.Thanks for such a nice platform.
I am in deep problem.Your help would be very much appreciated.

I have HP Pavillion DV6500, Windows Vista Home Premium 32 bit

Suddenly i was getting the blue screen error everytime i turn on my pc and eventually it crashed and restarted.I uninstalled one of the upgrade of windows from control panel.After doing so my USB port,Network ports are not working.Even WAN port and WIFI are also not working.I tried to rollback driver but its not working.

Is it anyhow possible to solve this issue?

A:USB Driver,HD Audio Driver,Network Port Disabled

Try this:

System Restore - How to

8 more replies
Answer Match 42.84%

After installing W8 on a Toshiba satellite laptop, all went well except Realtek AC97 won't install. Re-installing the driver didn't work. Windows reveals a code 10 and mentions the driver did not install correctly. Naturally there are no sound devices present with this occurrence. Plugging in an external USB sound device (creative sound blaster) works perfectly, just not as convenient as having the internal Realtek AC97 sound device working. BTW, this is not an HD sound driver, it's the regular Realtek driver. Tried a driver download from three additional sources w/o success.

A:Realtek AC97 audio driver (not HD driver)

Not paying attention, I inadvertently posted this on Windows 7 forum, sorry.

2 more replies
Answer Match 42.84%

After installing W8 on a Toshiba satellite laptop, all went well except Realtek AC97 won't install. Re-installing the driver didn't work. Windows reveals a code 10 and mentions the driver did not install correctly. Naturally there are no sound devices present with this occurrence. Plugging in an external USB sound device (creative sound blaster) works perfectly, just not as convenient as having the internal Realtek AC97 sound device working. BTW, this is not an HD sound driver, it's the regular Realtek driver. Tried a driver download from three additional sources w/o success.

A:Realtek AC97 audio driver (not HD driver)

Compatibility mode did the trick.

10 more replies
Answer Match 42.42%

Windows 7 64-bit I'm using an AMD Athlon 64 3500+ processor My audio is working, but I'm getting "popping" noises every 15-30 seconds and it's really bothering me. I updated to the latest driver for Realtek AC'97 and I insalled the Realtek HD Audio drivers, but only the AC'97 shows up in the device manager. When I got to add/remove programs, it shows that HD Audio can be uninstalled, but I don't know if that means it's working. From reading around on the internet, some people said the HD Audio driver solved their problem, but I'm not sure if mine is actually working or not. I don't know much about computers, so please spell things out explicitly for me so I can just follow directions.
 

More replies
Answer Match 42.42%

well i dont have sound, no volume control on taskbar, no audio driver

System

Microsoft Windows XP
Media Center Edition
Version 2002
Service Pack 2

Manufactured and supported by:

HP company
HP Pavilion
AMD Athlon (tim) 64 X2 Dual Core Processer 3800+
2.00 GHz, 960 MB of RAM
http://www.youtube.com/watch?v=s8ur-LApXmI
watch the video and u will find the problem.

this video shows my problem, and if u need more info sure ill reply and if u wanna do teamviewer pm me or pm ur email
i asked few support from different forums like 5star, major geek. havent helped yet. and i saw this forum so im hoping u guys can fix the problem. thx
 

A:No Audio Driver... Audio problem

13 more replies
Answer Match 42.42%

Hi,
I have a Dell Inspiron 15R 5520 for a few years already.
A few weeks ago, out of the blue, my speakers wont work. Theres just no audio.
I can get audio only when I connect earphones.
I tried to uninstall the audio driver (Conexant smartaudio HD), and windows 7 automaticaly installs High Definition Audio Device. When I did that the speakers worked, but there was no sound when I connected the earphones. When I reinstall conexant it happens again - no sound from speakers, only from earphones.
Tried reinstalling several times, tried updating the driver, I even formatted my computer and nothing helped.

Please help me find a solution.
thanks.

More replies
Answer Match 41.58%

how do i install a sound driver or audio driver on windows xp, it worked on windows millenium before i upgraded to windows xp, can someone please tell me what i must do to install a sound driver and or audio driver??? i also have no access to the internet on that computer, this is my spare, someone please help me asap im in desperate need of assitance!
 

A:Sound Driver/Audio Driver

Hi kyledibiase, and welcome to TSG.

You will probably need use the Internet connected computer to go to the motherboard manufacturer's web site if the sound controller is built-in or the expansion board manufacturer's web site if the sound controller is a separate plug-in card. Then check if they have a Windows XP compatible driver for that particular board available for download. They should also have information on the correct method for installation of the drivers. In some cases, they may be bundled into an executable installer program that will handle all the details when run.

Download the driver file(s) and put them on some media (flash drive, burned CD, portable HD, etc.) that will allow you to transfer them to the problem computer for installation.
 

1 more replies
Answer Match 41.58%

how do i install a sound driver or audio driver on windows xp, it worked on windows millenium before i upgraded to windows xp, can someone please tell me what i must do to install a sound driver and or audio driver??? i also have no access to the internet on that computer, this is my spare, someone please help me asap im in desperate need of assitance!
 

A:Sound Driver/Audio Driver

Why have you no access to the internet on the computer in question is it a question of drivers? Goto start right click on my computer click the hardware tab click devices manager scroll down to sound and video controllers and click on the plus sign see what the name of your audio device is (on mine its Realtek AC97 audio.) when you have the name goto the pc you can get online with and type it into your search box. Goto the home page and download the driver. Then you will have to copy it to cd and install it on the computer with no sound.
 

1 more replies
Answer Match 41.16%

Hi There ,

I just reformatted my Gateway NV54 laptop with windows Vista on it.
My sound is working fine but my microphone is not working at all. I have tried both the inbuilt mic and an external one.
I downloaded the latest audio driver from http://support.gateway.com/product/default.aspx?modelId=2376 which is the conexant 4.98.9.0. (x84)

When I run the driver setup it just says "Driver installation failed: Could not find the device for this driver."
I am confused because as far as I know because my sound is working that means my audio driver working?
Any help would be greatly appreciated.

OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 1, 32 bit
Processor: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 1976 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 796 Mb
Hard Drives: C: Total - 295242 MB, Free - 152804 MB;
Motherboard: Gateway , SJV50MV , Rev , LXWDH0X007931B5DEC2200
 

A:Audio Driver not working "Could not find device for this driver" Gateway laptop

Could not find the device for this driver

That error message suggests to me that you're trying to install the wrong driver for that sound device.
Please double-check on the Gateway website, there may be a choice of two or more audio drivers for that model, depending on what hardware was available at the factory when your laptop was assembled.

If there is a choice, you may have downloaded the wrong one or selected a laptop model which is not exactly the same as yours.
 

2 more replies
Answer Match 41.16%

Hi
I have an Acer Aspire 5315 with Windows Vista. Around two weeks ago my computer started saying that there is no audio device installed. I went to Acer's website and downloaded the Realtek sound download for my model and operating system. When I ran it, it said "no drivers found" or "no driveres supported" (I'm sorry I can't remember which). So I deleted the file and downloaded it again and all it did was open the file and display the contents instead of running it automatically. Also, when I go to the control panel and look under sound it still tells me there is no audio device installed.

I don't know much about drivers. Honestly, I don't really know what a driver is or does. I've just been going on answers other people with "no audio device installed" questions have gotten. Can somebody please help me?
 

A:Problem with Audio Driver "No audio device installed"

Mel: When the file displayed its contents, did you look to see if there was a "Setup.exe" file?
If there is one, double click it and it should load the drivers.
Also, look in Device Manager for any yellow ? marks.
 

3 more replies
Answer Match 40.74%

I got a new VA520 for Christmas and have noticed that @ certain times when scrolling pages or programs the images and text sometimes shimmers or jerks. Is this normal for LCD's monitors?

I've got lastest Driver for my Video card.

Thanks

Saintfan
 

A:ViewSonic LCD question

anybody have a clue?
 

2 more replies
Answer Match 40.74%

I was looking to go from my 22 inch NEC FE2111(too big) to an LCD monitor; However, I can't seem to make up my mind. I've narrowed it down to the Viewsonic VP191B ($449.00 at newegg) or the BenQ FP91G+ ($329.00 at newegg). I've heard nothing but good things about BenQ, and I already know the excellent reputation of Viewsonic. I do alot of gaming so that's an important factor. I know CRT has better visual quality than LCD, but I need to conserve space, so any input on these 2 monitors would be appreciated.
 

A:Viewsonic or BenQ

We use Viewsonic 17'' at my work & they r ok. Although I have a BENQ at home & I find it way better than the others. I had an LG one b4 & seriously the BENQ not only looks better but was cheaper too! they r owned by Acer or some other joint big organisation & are not crappy at all. others have said that because they haven't heard of them then they must be crap, but you just have to research them b4 judging.

Either r good ... but yeah thats just my opinion :grinthumb
 

5 more replies
Answer Match 40.74%

I'm trying to decide between the G90FB 19" or the P95F+B...
Here are the links:
G90FB
http://www.newegg.com/app/ViewProductDesc.asp?description=24-116-282&depa=1
P95F+B
http://www.newegg.com/app/ViewProductDesc.asp?description=24-116-232&depa=1

The only real difference between the 2 is the fact the Professional one (P95F+B) has an aperture grille while the Gaming (G90FB) has a shadow mask

I know the shadow mask uses dots (dot pitch) while the aperture grille uses lines instead of dots...

Which monitor will give me the best picture for gaming and crisp clear text.
 

A:Which is the better Viewsonic monitor?

If you can afford it I'd get the Professional version. I had Philips 107P (Professional) monitor with a .25 Aperture grille and it was the best monitor as far as picture quality/clairity I've ever seen (I'm sure there are better, but not without paying major money).
 

2 more replies
Answer Match 40.74%

I've downloaded and gone through the Device Manager install of the Vista signed and unsigned drivers from Viewsonic. Choose the vx2835wm as the monitor and... "file not found". Viewsonic support sends me to a link that says "no drivers available" and then says to download their Vista 64 package I've been doing since day 1. (been doing this and all suggestions since Nov 2007)

Vista Ult. 64 uses its default non-pnp drivers where I have my 1920x1200 native res. with everything but gaming (the reason for purchasing this monitor). I can't get anything higher than 1600x1200 (in gaming) and well, its fuzzy. Can't use windowed mode, OS drivers stop functioning and reload frequently. I've set the res. in the nVidia panel to 1920x1200, set the game ini file to 1900x1200 but it still will only work at 1600x1200 although the games support the higher resolutions.

Is there anyone here that uses this monitor that has found Vista 64 drivers that work? If not, is there a 28", or even 30, that has Vista 64 drivers that will work at native resolution with any program or game?

I am ready to sail this monitor out the third floor window and buy another if I can't get a solution for fixing this one so need recommendations on other monitors as well.

Thank you

2x8800 nvidia ultra's sli'd
extreme core 3.0
4gb corsair
evga nforce 780i
thermaltake 1000 watt ps
sb extreme gamer fatality

A:Viewsonic vx2835wm

Dwarf I don't see your reply here although I did get an email that you posted.

The following link is to the signed standard Viewsonic monitor driver for Vista 64-bit. This driver should be installed with administrative privileges. For games, you might need to adjust your settings such as anti-aliasing in order to be able to use this resolution. The higher certain settings are, the lower the maximum resolution that is available. This is just a matter of trial and error, bearing in mind that higher resolutions require more working RAM on the graphics card and also a card of sufficient power to yield a decent frame rate at these settings.
Dwarf

I did download those many times each time it was updated by Viewsonic. It goes through the device manager wizard fine and then 'file not found'. However, someone did message and email me their driver folder from the monitor cd and it worked. Apparently my cd was a bad one. So all is well and working. Games are working great with the right resolution now.

OSL

4 more replies
Answer Match 40.74%

About four months ago I bought a supposedly rebuilt Viewsonic P815. About one month after I hooked it up it started to not degause. The screen is pink.

Every once in a while it will correct itself and be fine for a day or two, then it goes pink again. I've replaced cords and plugs.

Any ideas?

Thanks.
 

A:Viewsonic monitor

6 more replies
Answer Match 40.74%

Hello,
I was just wondering if I'm pretty much out of luck with my monitor or is it fixxable?
Whenever there is any spot for black its pretty much like the picture on the right in this link
http://spectacle.berkeley.edu/~fior...rtist_varia_topics/[email protected]@@@@@itaki_fade5.html
It makes watching things or playing games horrible.
 

A:ViewSonic Monitor

Your link doesn't work.
 

11 more replies
Answer Match 40.74%

I bought a viewsonic 1945wm 2 days ago and there is a continuous buzzing sound when it is displaying. Is it normal?
 

A:viewsonic vx1945

uh, how louds the buzzing?
 

3 more replies
Answer Match 40.74%

Alright here's a good one, monitor less than a year old, I could never load drivers for it because screen would go haywaire, real wavy along the side edges. ok so I've been using the win98se driver, plug and play monitor ones, well now it's doing it even with them. I d/l the latest driver for win98 from Viewsonic, load them and it really goes berzerk, delete them, screen is still unstable. So, I do a print screen while it's doing this thing so I can post it for you folks to look at, and when I paste it into notepad the picture is fine in the file. what I mean is that to the pc the screen is normal, man am I confused. What does this mean???
 

A:Viewsonic Optiquest Q75 what the h***

Ether your monitor is slowly dieing, or your refresh rate is too high.
 

2 more replies
Answer Match 40.74%

Hi guys,
I'm about to buy an 17 inch LCD screen Viewsonic VX715.Anyone familiar with the model?Anyone can give me their opinion on the model?

Thank you
 

A:Your opininion on Viewsonic LCD

lyam77 said:



Hi guys,
I'm about to buy an 17 inch LCD screen Viewsonic VX715.Anyone familiar with the model?Anyone can give me their opinion on the model?

Thank youClick to expand...

Well,
I have just bought the monitor and i must say it is great. Of course it is not intented for gaming. The price was really good too. 399$ CAN.
I am very satisfied with this model.
 

1 more replies
Answer Match 40.74%

I have a suspected cold solder joint in the power supply of my Viewsonic VP2130b monitor that I could probably locate and fix myself if I could figure out how to get it apart. Any help would be appreciated.

Thanks in advance
Best regards
GordL
 

More replies
Answer Match 40.74%

My daughter's AOC monitor died, boo hoo, it was 6 years old so it was bound to happen. O.K., I buy a spanking new Optiquest Q75 plug it in, load the drivers and voila, it totally screws up her pc, I mean the screen was distorted like i never seen before in my life. It was like 2 giant magnets were going up and down the sides of the monitor. I brought the monitor up to my pc, it worked fine...those dam drivers screwed up her entire operating system, I could no get them off her pc so I reformatted her HD, 4 hours and many grey hairs later, (I mean if I still had hair that is), she has a new monitor. Imagine me thinking I was just going to plug it in.
 

A:Viewsonic hell

Brite
Hummm... seems you ran into imcompatable drivers! Had that happen on my matrox Etv video card and really had a ball straighting it out! I didn't have to reformat though!

Dave
 

2 more replies
Answer Match 40.74%

I run XP on a new box and a fairly new 19" (year old) View Sonic LCD monitor. The monitor worked as advertised on my old PC but when attached to my new one I frequently get a flashing green power indicator light and will get no picture.

This happens 100% of the time if I cold start the PC and I have to screw around with the restart button and on/off power button to get it to come back to life and in truth I do not know which combination of button pushing gets it to come back. I now use the power saver mode because that seems to be the most consistent way of bringing the monitor back to life but even that didn't work this am.

ViewSonic's web site wasn't much help.

Help here?
 

A:ViewSonic Monitor

9 more replies
Answer Match 40.74%

Hi,

I have a ViewSonic 19" UltraBrite a90+ with a ati radeon 9800 pro....

When I play games like CS things far away and even up close kinda shine with this glare and its really annoying. Plus my monitor -- which i got last december -- has these lines going acrross it. On wallpapers and programs such as a game theres these strips that go all over.

I dont think its my video card and i have my fresh rate @ 120hz

any helpers?
 

A:ViewSonic A90+ Problems

These are the MAXIMUM refresh rates of your monitor, exceeding them will damage it. Your monitor does not support 120Hz.

2048x1536 maximum resolution

Displays a maximum resolution of 2048x1536; 1600x1200 optimal resolution at 87Hz flicker-free refresh rate for easy-on-the-eyes viewing.

2048x1536 @ 68Hz
1920x1440 @ 73Hz
1856x1392 @ 75Hz
1600x1200 @ 87Hz
 

2 more replies
Answer Match 40.32%

as the title mention, my viewsonic LCD is not working with my copy of window 7. i dont know why. i have tried with my old samsung CRT, both of the DVI (using DVI-VGA converter) and VGA outout is working perfectly, but i cant get my LCD working. when i boot from safe mode, the LCD working. could it be my gfx card problem? here is my system spec. hope to solved this problem soon.

OS: MS window 7 ultimate 64bit
window version: 6.1.7600 build 7600
processor: Q6600
mobo: gigabyte GA-P35-DS3
mobo bios: F14 (latest)
GFX card: palit HD 4870 sonic dual version (512mb)
GFX driver: 9.12
RAM: CORSAIR DOMINATOR 4G DDR2
HDD: WD 320G
PSU: CM 650W
OUTPUT:
1.VIEWSONIC VX1935WM
2.SAMSUNG 107T

thanks in advance..

A:viewsonic LCD is not working with window 7

Hi FairCold and welcome to Windows 7 Forums

Since your LCD monitor is working when you boot into safe mode, that eliminates hardware. It is probably a driver issue or, more likely since your CRT works, a settings issue. What refresh rate have you got it set at? There is generally no need to drive an LCD monitor at a higher rate than 60Hz. A CRT, on the other hand, can work upto 150Hz (depending on model and resolution). If your refresh rate is other than 60Hz, try setting it to that frequency and see what happens.

2 more replies
Answer Match 40.32%

Hi Everyone,

This is my first post here so I hope someone here can help me. I'll lay down my situation, and then I pray someone has an answer for me. Ok, here goes:

I have a ViewSonic 32" LCD T.V./Monitor ((Link: http://www.viewsonic.com/support/desktopdisplays/lcdtv/n3250w/ )) Just in case you want to see it.

But anyway, the problem with this monitor is this. Over the past month or two, my monitor began flickering. Over time its gotten worse and worse, and now the screen becomes garbled on the right half of the screen and sometimes it completely blanks out...almost as if the screen is melting. I've tried everything...the first of which was buying new cables. I bought a new monitor cable from my work...but yet the problem persisted. I bought a new graphics card ((ATI Radeon x1650 Pro 512MB card)), installed it...but it was still garbled. Recently I tried hooking a new desktop up to it...and still the monitor was garbled. So I narrowed it down... it has to be something with the monitor. But before any other conclusions are thought up, I also have a Xbox 360 plugged into the monitor that runs fine...no screen flickering or garbling present at all. So, the problem must be in the monitor cable adapter/hook-up thing located on the back of the T.V. Before I fight over the manufacturers about fixing my monitor...does anyone know anything else I can attempt to try and fix this thing?

Thanks for any reply....this thing has been a pain....
Vernan
P.S. I'm go... Read more

A:Garbled ViewSonic Screen...NEED HELP!

Check the refresh rate of your monitor and be sure you are not driving it faster than it was designed to be driven. Also, be sure you are not attempting to use resolutions higher than the monitor was designed for.
 

1 more replies
Answer Match 40.32%

I have a Viewsonic VA721 monitor that I was using up until earlier today when the monitor started acting like a scrambled cable tv channel when turned on.

I was wondering if anyone might happen to know as to what might cause that, what the technical term for it might be and as to whether or not it can be fixed.

Up until today I have never had any problems with the monitor. Every time I would walk away from the computer for a while I would shut the monitor off so that I could avoid any burn in problems with it thereby preserving the life of the monitor. Because of that I have never had any problems with it until today and at the moment I do not know what could be causing the problem.

I tried the monitor on two different computers with two different cables and got the same result. I bought the monitor in 2006 brand new and up until today it has served me faithfully without any problems.

I don't know if it can be fixed or even if it is worth it nor do I know if it is something that I can fix myself or if I would have to have someone else fix it.

What I do know is if there is anything that I can do to fix the problem myself and restore it to active service then I might choose to give it a try.

Until I have more answers though I cannot make an informed decision about any of it and that is why I am asking.

I am hoping that there will be someone here that will know about such things and can give me some straight advice and information about the monitor and the pro... Read more

A:Viewsonic VA721 Monitor

9 more replies
Answer Match 40.32%

I am running Vista Home Prem.I use an 8800 GTS EVGA.I have the latest drivers for my 8800. I run 2 Viewsonic monitors. One is a VG900b and is fine. I also run a VX2235 digital monitor. Both monitors are listed in device manager by model. I manually installed drivers directly off of the discs.I have also downloaded Viewsonic's monitor drivers. I can't get my 22" to go to it's native resolution of 1680x1050.I have had these installed for a long time and working fine. When I ran a hard disc error check that is listed under tools under properties of my computer it erased my 22" and it's capabilities to operate @ native resolution. Another difference is that before I manually installed the VX2235, it was listed as a 'non plug and play monitor' under device manager. I have never seen that before. Does anyone know how to fix this? I am this close to going out and buying a new XP Pro disc.
 

A:Viewsonic monitor drivers?

Why not just uninstall the monitor drivers you installed and reboot and use the Vista drivers?

Start there.
 

2 more replies
Answer Match 40.32%

Asus VW266H ($375) vs Viewsonic VX2640W ($399)
Both 25.5 viewable

300 cd/m^2 vs 400 cd/m^2

Viewsonic does not have DVI
both have HDMI

Image Contrast Ratio
20000:1 (dynamic) vs 1000:1 / 4000:1 (dynamic)

Color Support
24-bit (16.7 million colors) vs Up to 16.2 million colors

Gray Response Time 2 ms vs 3 ms

Which one would you choose? Any other ideas?

A:New monitor Asus vs Viewsonic

Come on and give us a clue what you want to know.

9 more replies
Answer Match 40.32%

My monitor is 1.5 years old and has been working perfectly. (I take very good care of my monitor!) Yesterday, with no warning, the screen slightly dimmed and then went black. The "on-off" switch flickered. I tried disconnecting it from my CPU and unplugging it from the electrical source and I tried re-booting my computer. None of this made any difference. I have a new video card but connected the monitor to another computer just in case the new card was bad. Again, no results. I hate to think that a 1.5 year old monitor needs to be replaced. Any suggestions? Thanks!
 

A:Viewsonic VX910 problem...

Does it even go to standby mode ? If you simply connect the monitor to a power socket & not to a computer, when you turn it on it should go into standby mode. If it doesn't even do that then it is your monitor that's at fault (& probably needs to be sent in for repair).
 

4 more replies
Answer Match 40.32%

I hooked up a brand new Viewsonic (VX1940w LCD 1680x1050) monitor to my macbook 10.5.7 (1280 x 800) and the picture is fine but the text is super grainy and hard to read. I have tried messing with the resolution and toying with Mac's font smoothing feature with zero success. Please help!

Here are some more specs:

Color LCD:
Resolution: 1280 x 800
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
VX1940w:
Resolution: 1680 x 1050 @ 60 Hz
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
 

More replies
Answer Match 40.32%

hi

I have a 15" Viewsonic VA520 LCD monitor that is having some problems.

The monitor has a a built in "auto adjust" and at the moment all of a sudden it keep auto adjusting over and over again. I cant shut my monitor off unless i turn the power cord off and when i do the same problem occurs over again.

Ive unplugged the monitor, then plugged it back in, unplugged all the computer wires and then replugged, done a virus check but it is still like this.

There are 4 buttons on the bottom of the monitor

if i click the 3rd button (the up selection button) and hold it the "adjusting" goes away but the minute i let go it reappears. I hold that button and then hit power the monitor shuts off but not normally.

So i guess my question is how to i make this auto adjust go away other than to take it to a dealer and get it fixed. Im wondering if there are other options.

thanks.
 

A:Viewsonic LCD wont shut off

someone just told me this might be a video card problem. Is there any way to figure that out?

thanks.
 

2 more replies
Answer Match 40.32%

This monitor came with a DMI cable and the usual VGA cable. I ordered and installed an nvision 6200 card and I installed the latest drivers for the card and disabled the onboard video on the motherboard. Question: I attached the DMI and VGA cables onto the Video card but I not sure that this hookup is correct. Should the VGA cable be attached direct;y to the tower or is my present hookup just as good. Picture quality is good but it 'may be' better if the VGA is hooked to the tower. As usual, TIA.

EDIT: Just thought my question and I believed my present hookup is the only way for me to go. Why? Because I disabled the onboard video, hooking the VGA cable to the tower would not do anything for me.
 

More replies
Answer Match 40.32%

Ok, no laughing when you read this.....I just bought a new Dell 660 computer that has Windows 7 on it. I can't get my monitor to work on it. Ok, so don't laugh, but it has been a good monitor that was manufactured in 1997......Viewsonic E771.....you know the old, bulky thing. I told myself that I would not buy a new one until this one died. I'm on my third computer with this monitor. Can I get this thing to work with my new Dell?
 

A:Windows 7 and old Viewsonic Monitor

Wow, does that bring back memories. I use to have one It's time for you to treat yourself to another Viewsonic monitor that will enhance your new computer

http://www.newegg.com/Product/Product.aspx?Item=N82E16824116580
 

3 more replies
Answer Match 40.32%

I just replaced a 1280x1024 Viewsonic monitor, that had gone bad, with another one (Viewsonic VA708).

Though I've never really been one to pay "hard hard" attention to how things look on a monitor - never felt a problem with anything - something just looks/feels "off" with this one.

This is most noticeable to me on the titles appearing on the browser tabs in Firefox. They just look "wrong" - watery maybe to my eye.

BUT... I have attached a screenshot comparing a blowup of a browser tab from my work computer Dell 1280x1024 monitor (top) and my new Viewsonic monitor (bottom), blown up to 1000 px wide (I cropped), and in the blowup, I can't tell the difference.

So why might I be perceiving things differently with this new monitor?

FWIW, I did update the driver from the Viewsonic site, and I also played with both the monitor's and the control panel's display adjustments.

More replies
Answer Match 40.32%

Hey iv got a Viewsonic VX2260wm. I try turning my pc on and my monitor is dead. It was switched off the night before and wasn't touched in any way.
Iv tried switching power cables and dvi cables. Still no life. No power light, nothing on screen, totally dead.
Any help is greatly appreciated. Thanks
 

More replies
Answer Match 40.32%

Just purchased a new Viewsonic VA720 17" flat screen & had problems installing same. Took it to technician, paid $60, got it home and plugged it in. Nothing - no screen image and a complete lockup; had to unplug unit from wall to shut down.

Started it with WIN98 emergency disc and it went directly to the BIOS setup with following statement (in red). During the last boot up your system hung up for an improper CPU external speed setting. Your system is now working in safe mode. (Bus: 100MHz, DAM: 100 , PCI: 33 MHz). To optimize the system performance & reliability make sure the CPU speed conforms to the specification of your CPU.

Had previously copied all BIOS data (thank g-d) so went over it & found the tech had turned off the Plug & Play O/S. I turned it back on and the screen showed up immediately with no further problems to date. Called the tech and he claims they always turn off the plug & play as they found it interferes with system operation. Is this true?

Also I still wonder how to optimize the system by making sure the CPU conforms to the specification of the CPU. Any help and/or information on this matter would be greatly appreciated
 

A:Viewsonic flat screen

I think you will get arguements either way on using plug and play os or not.
I have always used it without a problem and so my feeling is if your going to run a plug and play operating system why disable it.
 

1 more replies
Answer Match 40.32%

I just bought 22" viewsonic vx2235 , but having problem in installing it,The maximum vmixel size is 1680x1050(wide view) but my properties doesnt show this pixel size.rather my pc pc shows only non wide view pixel .

I have installed the dirver as shown in user guide but still doest work.I have 2.8Ht and MSI chipset board, please tell me what may be the problem that i done have wide view pixels

Please Help!!
 

A:ViewSonic vx2235wm LCD monitor

What video card to you have? BTW I have the same monitor.
 

4 more replies
Answer Match 40.32%

I have a ViewSonic 19" CRT monitor (bought new in '99) connected to a PC that runs Win XP SP2, 512 MB RAM, Matrox Millenium AGP card.

The system ran fine until I moved it (carefully) to another room. The CPU boots but the monitor does not give any video. I get a black screen with a repetetive blue area that indicates no signal. The specific line entry is "No Synch". I think I may have seen this in the past, when the monitor was powered on but the CPU was shut off. I can't be certain it's the exact same condition.

I switched cables and tried a different video card but no luck. I don't have another monitor other than my laptop. I think I can hook it up to act as a monitor but not certain. Can't afford to crash the laptop.

Any suggestions?
 

A:No Synch w/ ViewSonic Monitor

8 more replies
Answer Match 40.32%

I've got a Viewsonic P95f+ monitor.

19" CRT

I keep the brightness at medium level, but it regularly goes darker (Grey/washed out) and it gets harder to read the print (Seems blurry). I haven't nailed down a pattern, but I'd say every 15-20 minutes or so. It lasts 1-10 minutes, then goes back to my regular brightness.

The monitor is probably 5-7 years old, but I've had no problems until now. I recently put in a new power supply and graphics card in my PC, but I can't say if this started before or after those changes.

Could this be a problem with a driver/the graphics card/power supply, or is it just time to get a new monitor? Any tips on how to diagnose?

Thanks,
Eddie
 

A:Viewsonic CRT Brightness Problems

Sounds like you will need a new monitor. Since it is happening fairly often hook it up to another computer and see if the same thing happens.
 

2 more replies
Answer Match 40.32%

hello i am new here. my viewsonic VE710b lcd monitor is acting up. when i boot into ubuntu 7.10 the monitor blinks on and off for a minute before it stabilizes. this happens even during the loading of grub which only means that it has nothing to do with the OS. i tried with my other linux OS on another partition and the same thing happens. does this mean that its the end of the road for my trusty friend?!

 

A:viewsonic monitor on the fritz?

6 more replies
Answer Match 40.32%

I have a custom build system that has performed flawlessly since I built it about 15 months ago. I just purchased from Costco, a ViewSonic VA2012wb LCD and it is able to do everything (MSOffice, Internet, etc.) except run my games (Call of Duty, Medal of Honor, etc). Call of Duty upon launch, causes a black screen with 'out of range' complete with system hang - requiring reboot. MOHAA attempts to launch, but fails with the message 'GLW_StartOpenGL() - could not load OpenGL subsystem'. All ran fine with my old 17" CRT.
My config is:
Custom Build - P4 3.00GHz PC3200 DDR-1.0GB RAM XP Pro SP2
128MB ATI All-in-Wonder 9600
ViewSonic VA2012wb LCD (used in analog mode) 1680x1050 60Hz(defaults)
HP CD-Writer+ 9100 / SONY DRU 720A DVD RW
WD80GB / WD120GB / APC UPS
DirectX 9.0
I have looked for updates and patches to address the errors at the sites of ATI, ViewSonic, and Windows Updates, with no relief.
I hope someone is familiar with this and can offer a hand.
Thanks - LB
 

A:ViewSonic VA2012wb 'out of range'

6 more replies
Answer Match 40.32%

Hello I recently recieved a a90f CRT 19inch viewsonic monitor

http://www.viewsonic.com/support/desktopdisplays/crtmonitors/aseries/a90fplus/index.htm

When I plug it in and connect to pc, the yellow power light turns on. When I turn on the pc the yellow light turns to green as normal, but the screen stays black.

I have tried it on as low as 800x600 resolution and on 2 different PC's. Video card ATI radeon 128mb 9800 pro.

Is this a defective monitor? and is it able to be fixed? Or is is most likely a tube problem, or am I missing something in my ignorance. Any help would be appreciated.
 

A:Viewsonic a90f problem ?

Hello and welcome to Techspot.

The fact that you`ve tried the monitor on two different pc`s, would suggest to me that the monitor is faulty.

Regards Howard :wave: :wave:
 

3 more replies
Answer Match 40.32%

I have a four year old 19" viewsonic monitor-just recently its started shutting itself off for no apparent reason. If I press the power button it comes on again-for a while. Tried it on a different PC and same problem

Is this a known fault with monitors and is it likely to be worth repairing I wonder?
 

A:Viewsonic monitor turning itself off

10 more replies
Answer Match 40.32%

please help................my computer is quite old in computer years......about 6 or 7 years old.................i've never had any problems with it until now.....after recently moving and not having it set up for a few months i finally got it ready to use again......it was all running fine for about two days when i started having the monitor problem..........i have a viewsonic A90 screen..........the image on the screen will zoom towards the center and then the screen will turn black............if i turn it off and on it will just do the same thing and go black again......at one point it started working again for a few hours but that's it......i had the whole computer running off an high grade extention cord which i thought may have been the problem but i have moved it off the extention and i am still having the problem......i have fiddled with the cords etc and it didn't help..................please help me.....is the screen totally gonners????? this is very strange..........i've never seen a screen do this

greatful for any help........thanks
 

A:old viewsonic monitor problem

7 more replies
Answer Match 40.32%

I recently downloaded the latest drivers from ViewSonic's page and isntalled them, and upon rebooting I had weird resolutions listed. Missing are 1024x768, 1280x1024, and 1600x1200. Instead I have ones like 1280x720, 1280x768, 1280x960, 1360x768, 1600x900, and 1600x1024. I Desperatly need my non-distorted resolutions back!! I have tried uninstalling the drivers and the device. I have also tried to just change to a Generic driver but the resolutions are the same. HELP!!!!
Monitor : ViewSonic A90f+ UltraBrite
 

A:ViewSonic Monitor Drivers

10 more replies
Answer Match 40.32%

hello everyone.

I have a monitor viewsonic p220f that when I turn on, a thin blue horizontal line appears in the middle of the screen. Dont know if its broken or could be fixed or maybe video cable is broken.
Please advise
Thanks ahead of time for any help.
 

A:Viewsonic Monitor Problem

It sounds like the vertical deflection is gone. Try the monitor on a different computer or a different monitor on yours to see where the problem is. If the monitor is bad its better to bury a new one than to pay to have it repaired. New monitors are pretty cheap now.
 

1 more replies
Answer Match 40.32%

My 2nd attempt to get some help off the forums

A few days ago, I tried loading up Warcraft 3, a game, and the screen went black, with the light flashing on and off. If I alt tabbed out of WC3 the screen turned back on. The problem persisted after a restarted, so I left it for a while. A few hours later I tried and W3 worked fine, no problems.

However today I turn on my PC and after a few seconds during the boot up, the screen goes blank with the flashing on and off light again. I restart it and it goes blank even faster.
After a while on the forums (on my GFs laptop) I try pressing F8 before the screen goes blank, and then press ESC for the 'default' Boot option. It goes on to boot up normally, with screen errors. I test out warcraft 3, (since when I first saw this it was whilst starting up this program) and it works fine, and goes on to do so for a few hours, till I turn the screen off and on to see if the problem is permanently fixed. It hasn't, the screen goes black.
Upon restarting my PC I get the same error as before, Pressing F8 and Esc doesn't fix it anymore. However now after pressing Esc I get to the screen where they ask me if I would like to Boot up in Safe mode. I do so and it loads up in safe mode fine.
Later on I try again to get it to load in normal mode, it does first time. Then upon loading Warcraft 3 again, the screen goes black again, with the flashing light. Again rebooting results in the same black screen a few seconds into loading... Read more

More replies
Answer Match 40.32%

My Viewsonic LCD monitor flashes on and off depending on what I am viewing. I can view pages in any program that has writing or a small number of small pictures without too much trouble. A web page with lots of pictures or the desktop and screen saver are the worst. The monitor flashes off so much on these last pages that I can barely see the page long enough to move the mouse and open a program or expand one from the start bar. I have checked cables, changed power cord, and checked video card drivers. Viewsonic website was no help. Anyone with any ideas?
 

A:Viewsonic LCD monitor trouble.........

Hi and welcome to TSG.

Do you happen to know if you are operating the monitor at or beyond its normal operating range for resolution and refresh rates?

Do you get a stable image if you start Windows with a lower resolution in Safe mode?

In the future, it would help us to help you if you give more details like the model number of the monitor and how it is connected to the computer. The TSG reporting utility program does not produce an exhaustive and detailed report about all of the hardware related to your computer.
 

1 more replies
Answer Match 39.9%

I have a viewsonic UltraBright A90f+ monitor and an ATI radeon 9600XT bravo video card. While playing some games my computer will hang and I believe use VPU recovery program supplied with the VC and then return to the game. After about 3 times the monitor goes black and "Viewmonitor" pops on the screen with 2 values 18.9 & 23.6 (normal values a lot higher)and the status is OVER at the bottom.It also says User Mode 14? I then have to restart the machine. Also I have noticed that sometimes when I exit a game my screen resolution has changed to that of the game I was playing. I have all the latest driver for Monitor and Video card. I have and ABIT MB using RAID set up and it also has its BIO's and drivers updated. I run windows XP also with 512M corsair ram.

Any help is appreciated

Thx E West
 

A:Viewsonic monitor locks up computer

Doesn't sound like the monitor is involved in the problem. A quick swap to another monitor to just be sure.

Does it only occur on one particular game? Anything running hot? How tight is the power supply sized?
 

3 more replies
Answer Match 39.9%

Hello - i wonder if anyone might be able to help with a quick question?

I have just plugged my view sonic monitor into my Macbook so i can extend my desk top - i was setting up the screen resolution and playing round with the hertz for refreshing as things were not looking right. Now it showing 'out of range' on a black screen. there doesn't seem to be a way to reset this from my Mac and the screen is now black. I have rebooted and it the view sonic screen doesnt seem to respond to resetting it. Could anyone help my to change the hertz on the screen via the macbook control panel - as i can see how....thanks...!
 

More replies
Answer Match 39.9%

I need some help with a LCD monitor that I bought from a friend. When I hook it up, the screen will be scrambled or very fuzzy. Sometimes I it will work, then sometimes it won't. When I hook my 17" crt up it works fine. Could there be a problem with my video card that doesn't support the LCD? If so, why does it work at times and other times not? The monitor is a ViewSonic VG 175. I appreciate everyones help.

Greg
 

More replies
Answer Match 39.9%

I'm stuck between these 3 monitors. The HP 27xi AOC i2757fh or the Viewsonic VX2770SMH-LED 27

They all look similar, but I'm just not sure which one to get. I'm leaning toward the HP 27xi though, but this site rated the AOC i2757fh a little higher over the HP 27xi. I'd like to hear some feedback from you guys.

My main usage is playing games like BF3/BF4, SWTOR and Titanfall when it comes out. I also do a lot of web surfing and occasional movie watcher on this monitor. My current monitor is a 24 inch Asus VW246H and I like it, but I don't love it. So my main concern is how well it displays games. I don't want any ghosting and the least amount of input lag I can find. Now, I know the AOC boasts a slightly quicker response time of 5ms vs the HP's 7 seconds, but the reviews I've read thus far state there is no visual lag from the HP. What do you guys suggest? Thanks in advance!
 

A:HP 27xi, AOC i2757fh, or ViewSonic Monitor

Really? No one has an opinion on this?
 

3 more replies
Answer Match 39.9%

Hello,

Few days ago I found something called "EventService" installed on my old XP laptop as an "driver".

I've made another post asking whether the program is malicious or not, but no conclusion is made. Here's all the detail I know:
https://malwaretips.com/threads/que...iver-from-viewsonic-laptop.57144/#post-490866

I don't know if there are still suspicious or even malicious files on my laptop after I uninstalled it, so I come here to for your help, thanks!

-Zevin
 

More replies
Answer Match 39.9%

During an upgrade from XP to Windows 7 I experienced a problem with my ViewSonic vx2235wm display and NVIDIA GeForce 8400gs video card. The display is powered and the blue light comes on when the computer is starting up. I get a couple of flickers of lighter gray on the display but no picture. I have upgraded the drivers for the NVIDIA card and the display but no help. The diplay is on a DVI-D single link connector with the video card. I can hook up a Sony display to the VGA connector in the NVIDIA card and get a picture fine. Neither NVIDIA or ViewSonic have come up with anything that helps. Any suggestions?

A:viewsonic display problem with windows 7

I finally got the driver needed from ViewSonic but it took two emails and a phone call. The driver is not listed on the site but is available at: http://www.viewsonic.com/support/downloads/drivers/_download/Standard_Monitor_Driver_Signed_Win7.zip

There is also a driver for 64 bit:

http://www.viewsonic.com/support/downloads/drivers/_download/Standard_Monitor_Driver_Signed_Win7_x64.zip

2 more replies
Answer Match 39.9%

My monitor seems to be experiencing some kind of problem.

The best way I can describe it is as a 'widescreen' mode. There is a black bar on the top and bottom of the desktop about 1 inch wide and extending across the entire length of the screen. I cannot move the mouse into this portion of the screen.

When adjusting the horizontal and vertical settings, 100% stops with the 1 inch black bars still in place. I cannot seem to make the desktop fit the screen. It seems to have shifted into some other mode of viewing.

I called Viewsonic tech support, but they didn't really know much else to do besides checking my settings. I am at 1024 x 768 resoloution, Radeon 8500 64MB graphics card, Windows XP and have installed the most recent drivers. Even when booting - the black bars are present, as if the monitor has somehow decided that is the mode it wants to be in.

If anyone has come across something like this before or knows how I might be able to fix it, I'd be MUCH obliged!

Regards,

Jeff.
 

A:Viewsonic Monitor E771 Problem.

Might be starting to fail, 3 year warranty on those generally check the date on the back. Absolute easiest think to do would be to try it on another computer. On the other computer see if you square up the image with the screen if you can't then its the monitor, if you can it could be the video card.
 

2 more replies
Answer Match 39.9%

I have recently changed my hard drive and had to reinstall all the programs on my computer. Since doing so, the Viewsonic monitor has been stuck in troubleshooting mode. All the fonts and windows are very large, and the only resolution available is 680 x 460, with the only colour option at 16 colours.

What do I do to get a better resolution with this monitor. It worked fine until the hard drive was changed.

I have downloaded the driver for the monitor from the net which was unsuccessful.

I tried changing the adapter from standard to SVGA as recommended by windows, which was rejected by the computer and I had to change it back.

Windows is not accepting the driver that I downloaded.
 

A:[SOLVED] Viewsonic Monitor problem

13 more replies
Answer Match 39.9%

Can any one out there tell me how to find out the best monitor settings, i am not sure they are correct, expecially the horizontal and vertical settings.
 

A:viewsonic a72f monitor settings

specs

1280x1024 maximum resolution
Displays a maximum resolution of 1280x1024; 1024x768 optimal resolution at 87Hz flicker-free refresh rate for easy-on-the-eyes viewing.
1280x1024 @ 66Hz
1024x768 @ 87Hz
800x600 @ 110Hz
640x480 @ 135Hz

http://www.viewsonic.com/products/crt_a72f.htm

drivers
http://www.viewsonic.com/support/drivers.htm
 

1 more replies
Answer Match 39.9%

Hey guys,
I brought my desktop back from school, but I didn't want to worry about transporting the monitor, so I'm borrowing my dad's Viewsonic VX2433wm. At school, I use a Samsung 2343BWX along with a Dell 20" 1680x1050 monitor (unfortunately, I don't know the model). However, my computer seems to act up with it connected.

The most obvious thing is that the text is kind of blurry. I tried adjusting ClearType, but that didn't seem to help. Pictures/color seem to look okay though, and most games look/perform the way they should. I made sure the video card is outputting 1080p, and I also switched to my integrated graphics chipset (Intel HD 3000), but it looks the same. I tried opening AMD Catalyst Control Center, but it tells me that the "Host application has stopped working". Doom 3 BFG edition also crashes once I get in-game.

Here's the weird part: When I connect via HDMI my AOC L32W761, all of these problems go away. AMD CCC works fine, the text looks okay, and everything seems as it should. When I connect only my TV, everything is okay too. Why would this happen? I've switched cables, switched ports, uninstalled/reinstalled the drivers with driver cleaners, and I can sometimes sort these issues out, but I'm pretty stumped right now. I don't think the monitor had issues before.

My setup is this custom build I put together last year:

Intel Core i7 2600k
ASUS P8Z68-V Pro/Gen 3
AMD/ATI Radeon HD 6950 2GB
8GB DDR3-1... Read more

A:Text is Blurry on Viewsonic VX2433wm

8 more replies
Answer Match 39.9%

Just got a ViewSonic VX1945 LCD-Dock.
I set it up, connected it all, etc. It was EXCELLENT!!
THEN, when I restart my computer (G4 OSX) The resolution is all fuzzy. I try to reset the resolution to the optimal setting: 1440 x 900.
BUT, I CAN'T!!
It's not offered in the Sustem Preferences Display menu.
Now, if it was ok to begin with, anyone got any ideas what happened?
And how can I reset it?
I've had it for 4 hours!!!
Help!
 

A:Can't change resolution on ViewSonic VX1945

When you say "optimal setting: 1440 x 900" are you talking about the ViewSonic menu or the WinXP display options?

I have the ViewSonic VX1932 at home. The ViewSonic options has a automatic resolution setting, if it is the 1440 x 900, you need to ensure it's enabled. This will automatically set your resolution correctly on boot. Also, you should ensure that setting is what you have under WinXP display properties.
 

1 more replies
Answer Match 39.9%

When I turn on my Viewsonic VG191 LCD monitor, it takes up to five minutes for the picture to become clear.
Is there anything I can do to correct the problem? The problem also occurs after the screensaver kicks in and the monitor is returned to activity.
The monitor is out of warranty (over three years old).

Thanks in advance,
Ron
Munroe Falls, Ohio
 

A:Viewsonic VG191 Startup Problems

If you test it on another computer and find that it is in fact the monitor, very likely it is and not the PC, then you can take the monitor in for repair. Some places offer free quotes, others don't. If its really cheap to fix then do it, if not then you'll need to live with it or buy a new one.

You can have new 19" LCD's with full warranties for $299.99 and sometimes even less.
 

1 more replies
Answer Match 39.9%

I want to start by saying I have read a couple of threads on this site that have similar problems with their Viewsonic monitors and the threads have not helped so I am posting this as new.

Hardware: Viewsonic VX910, Dell Dimension 4700, Radeon X1600 series video card, old spare Dell lcd monitor

About 1 day ago the viewsonic monitor would not come out of its "black screen"
I usually leave my monitor turned off (It is a server that I leave running)

I plugged in my old Dell lcd monitor and it works fine on this system (Computer and video card are now proven good) - Viewsonic monitor is now the culprit and I need to find a solution.

I am asking if anyone knows about any components in the monitor that have been found to cause this problem. I have replaced capacitors on this monitor in the past to correct a prior problem and it has worked flawlessly for the past 9 months after the fix. Here is what I am seeing; can anyone help?

I turned my monitor on yesterday to check something and this is what I found:

Symptoms:
1.) Upon turning on the monitor the screen lights up and displays what the video card is putting out (a desktop, or login box, etc.) for one second then the monitor goes back to blank.

2.) The led on the power button stays green the entire time indicating it is receiving something from the video card, but the monitor stays blank.

3.) If the monitor is unplugged from the video card the power lcd goes amber indicating no signal and I get the "no s... Read more

More replies
Answer Match 39.9%

I have a ViewSonic A90F + that starts out with normal video and then as it warms up one side of the screen is darker than the other and the video is streaked. It looks like a bad capacitor and I was wondering if anyone had a similiar problem and which cap was the culprit?
 

More replies