Tech Problem Aggregator

Optiplex 9010 AIO BIOS Update Error - ME FW Update Failed: Internal error: FWU_Buffer

Q: Optiplex 9010 AIO BIOS Update Error - ME FW Update Failed: Internal error: FWU_Buffer

Greetings!
I have an Optiplex 9010 AIO. This morning I was trying to update the BIOS of my system, from A10 to A13. During the update process it showed an error: "ME FW Update Failed: Internal error: FWU_Buffer " - please see the photo below. Although the update failed on the Management Engine part, it still boots up and running OK. I tried couple of times to update the BIOS, and each time I got the same error. I tried to flash the A12 and A11 BIOS as well, A12 gives same error, and A11 has the same Management Engine version hence no use.
Any help on this is very much appreciated!

A: Optiplex 9010 AIO BIOS Update Error - ME FW Update Failed: Internal error: FWU_Buffer

Hi Stone3t,
Can you provide a screen shot showing the current BIOS version?

16 more replies
Answer Match 93.6%

Hello,

I've got a system with BIOS A14, and would like to update it to A19 but...
When I run the update, it runs fine, the system reboots, performs the POST (but no updating of the BIOS), and then boots back into Windows with BIOS A14 still present.  No errors or messages anywhere.  I've disableed AV, and bitlocker is not used. 
OS: Windows 10 Pro 32-bit.
Any suggestions?

A:Can't update BIOS on Optiplex 9010 AIO

Hi BRATTIX,
Thank you for writing to Dell Community Forum.
Please right click on the file and select "run as administrator" and try installing the update.
Please private message us the service tag of the system along with your email id.
(Note: please don't mention the service tag or email id on the public forum as it contains your personal information).
Regards,DELL-Akshatha MSocial Media and Community Professional#IWork4Dell

1 more replies
Answer Match 107.1%

Optiplex 9010 AIO built-in Webcam not working properly.Windows 10 installed Microsoft driver as Integrated Webcam.Worked properly in Skype for Business 2016.After Windows 10 Anniversary Update, stopped working.Uninstalled device in Device Manager; rebooted and allowed Windows to detect.Installed as USB Video Device.Works intermittentlyHave to keep uninstalling device and re-detecting.Works for a day and then stops again.Uninstalling and detecting flips between Integrated Webcam and USB Video Device.All current windows 10 updates installed.Verified apps are "allowed" to access webcam.Internet search reveals this is a VERY common problem and there does not appear to be any resolution from Microsoft.When Webcam stops working it does not work in Skype for Business 2016, Windows Camera app; Web-based diagnostic site.Audio works.Incoming video and audio work.No alerts show in Device ManagerAttempt to update driver from Internet shows best driver installed.Attempt to install driver by pointing to Dell Windows 10 driver cab file shows best driver installed.CONFIGURATION:Windows 10    Version 1607    OS Build 14393.447    64-bitDell Optiplex 9010 AIO (certified by Dell)    Latest BIOS version    Current drivers as detected by Dell System DetectCurrent USB Video Device settings:    General-Device is working properly    Driver-Microsoft; Driver date of 6/21/2006; Driver ver... Read more

A:Optiplex 9010 AIO Webcam, not working with Windows 10 Anniversary update

jepoor,Click the link below, scroll to the bottom of the page to follow the steps shown for fixing the webcam.Fix Webcam Issues After Windows 10 Anniversary Update

2 more replies
Answer Match 104.58%

im trying to upgrade my bios as i have discovered it's not update since 2012 but evey time i try to update it it returns that error, and the reason i want to update is that i thought mybe that would fix the fact that i dont the secure boot option in my bios nor an uefi option so i thought that updating to 2.18 version  might fix that but even if thats not possible/wont be fixed with the update i still want to update my bios.addtional info:  *my pc is acer aspire v5-271G; running windows 10 (not preloaded into it i just installed last week). **also if it's releavant my pc was also NOT preloaded with windows 8 when i bought it i just thought that might be useful.any help is much appreciated  

More replies
Answer Match 97.86%

Hi,
Any advice?
I have a 9010 SFF that was working fine, except that it would not install the Windows 10 Anniversary Update.  Repeatedly, about 30% through the update it failed with a BSOD. I tried several times.
Somewhere I read that the BIOS might need updating so I headed over to DELL support.  I let the website automatically detect my system and it found a recommended BIOS update, version A24.
I initiated the BIOS update from the website and it seemed to run successfully but when the PC rebooted it hung half way through POST.
On a second attempt to start the machine - nothing - no display, no light, just will not start.
I tried clearing the NVRAM as indicated on the DELL website here: www.dell.com/.../SLN284985
I tried both the RTCRST jumper method and the battery removal method.
The result - it now continuously reboots but still no POST, no display, nothing.
I should add that during the original BIOS update, the PC had a Quadro 600 graphics card and a LSI 9200-8e SAS adapter card inside. They had both been working faultlessly and were removed when I tried to reset the BIOS NVRAM.
Any suggests on what next to recover my "bricked" desktop?
Andy

More replies
Answer Match 95.76%

 I am receiving this message when I run sp76205: The system BIOS update file (c:\SWSetup\SP76205\hpqflash\ROM.CAB) is missing or corrupt. The system BIOS will not be updated." SP76205 was just released in June 2016 and I noticed other user are experiencing the same issue with it. Please provide a fix BIOS update or explain how to run this current update...

More replies
Answer Match 95.34%

Hey everyone,
I recently purchased two second hand Dell OptiPlex 9010 SFF PCs for my grandparents with the intention of upgrading the memory in them from 4GB to 8GB and swapping out the 250GB HDD with an Intel 535 Series 250GB SSD so they both had a fairly fast/cheap PC.
 
When they arrived I booted them both up and they worked fine so I added the extra memory and they still plotted along fine but when I swapped out the HDDs from SSDs. Neither of the computers recognised them in the BIOS for some reason which I think was really strange. Though if I plug the HDD back in it works fine. Has anyone came across a problem like this? Here is a list of the things I have tried so far.

·       Updating the BIOS to the latest version (A22)
·       Reset CMOS (removing battery and RTC reset jumper switch)
·       Using a different SATA Port
·       Using a different SATA Cable
·       Using a different SATA Power connector
·        Verified the SSDs in another working PC.

More replies
Answer Match 94.5%

Hi there,
Recently I got a Dell Optiplex 9010 AIO running BIOS revision A05. I installed a fresh copy of Windows 7, and flashed the latest BIOS (version A19) from within Windows. System rebooted, it flashed the BIOS, but had an error just like this one.
In the end it said "BIOS Update Successful, Rebooting" but after rebooting, the Dell Logo/POST screen has never come up again. The fans turn on, the power light is solid white, but there's no video output on either the internal screen or a VGA-connected monitor. I've tried opening it up, removing the CMOS battery, using the CMOS clear jumper, when disconnected from power of course, to no avail.
Any ideas or have I just made myself a 23" paperweight? Thanks in advance.

More replies
Answer Match 92.4%

Hi,
Anyone can have any solution for OptiPlex 9010 small form factor BIOS A24 to setup three monitor with VGA , display port to DVI and display port to DVI?
Best Regards,
Gan

A:OptiPlex 9010 small form factor BIOS A24 not able to setup three monitor

The configurations that support 3 displays are limited to the ones listed below. If any other type of dongle or adapter that changes the input type on a port is used (Single-link passive DisplayPort to DVI, DisplayPort to VGA, for example), the system will automatically restrict the video card to two displays.The supported three display configurations are:Two (2) displays connected DisplayPort to DisplayPort (No adapters) and one display connected through VGA. (Recommended configuration) Two (2) displays connected via active Dual-Link DisplayPort to DVI adapters (Dell Part Number 470-AANW) and one display connected through VGA. (This configuration requires 2 available USB ports) One (1) display connected DisplayPort to DisplayPort (No adapters), one (1) display connected via active Dual-Link DisplayPort to DVI adapter (Dell Part Number 470-AANW) and one display connected through VGA. (This configuration requires 1 available USB port) NOTE: The Dual-Link DisplayPort adapter has a USB and a DisplayPort connector. Each adapter will require 1 dedicated USB port.

1 more replies
Answer Match 91.14%

Hi All

Some of our client machine(Windows7) is not taking update from WSUS server. When we verified the WindowsUpdate logs, we could see that WU client version is changed to 7.6.7600.256 from 7.5.7601.17514.Our WSUS server is running with version WSUS 3.0 SP1 on windows 2003 server. So we suspect this may be the reason windows 7 machines is getting the error message 'Windows Update Client failed to detect with error 0x800b0001' when it try to get the update from WSUS server.

So please suggest any steps to change the WU client version on windows 7 back to 7.5.7601.17514

Please find the attached log file.

A:Getting the error Windows Update Client failed to detect with error 0x800b0001

Hi this is about your error Error code when you try to use Windows Update or Microsoft Update to install updates: "0x800B0001"

1 more replies
Answer Match 90.72%

i just installed google chrome from online installer and then i moved the file using application mover to the HDD.. then i pasted a symlink in "C:\Program Files (x86)\" ... "C:\" is the SSD where the windows and the drivers are installed.... when i turn on chrome everything works file.. but the updater doesn't work... when i try to update i get this:



can anyone help me get that fixed.. thanks!

A:Update failed (error: 3)An error occurred while checking for updates:

Just uninstall Chrome then install it directly to the destination you want it installed instead of moving it post installation.

3 more replies
Answer Match 89.04%

Hi,I had encountered the above error - General Internal Error, while updating the AVG Free anti-virus.Additional message shown below:The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Context: MSI action failed.Previously, I had posted in another forum, suspecting that there might be malware or spyware. Please refer to the thread in http://www.bleepingcomputer.com/forums/topic411158.htmlI'm being asked to set up this topic in this forum instead.Hope there's someone out there who can help me out on this issue.Thanks in advance!Regards,Tracy

A:Cannot run AVG update - General Internal Error

I notice that you have PC Tools Firewall and Security Suite, and now my question is why are you trying to install another anti-virus?

28 more replies
Answer Match 89.04%

I have, or had a laptop purchased 9 months ago, therefore under warranty. Yesterday the ThinkVantage System Update recommended a BIOS update. After the traditional recommendations about what should not shut down the computer, the laptop is reset and started with the update.

During execution, displayed on a screen command, a message "ERROR XXXX. Press any key to continue." After press the key the laptop was freezedy was completely blocked. After an hour without seeing response and no sign of life, I decided to turn it off to confirm the disaster. The laptop was dead.

The laptop began to beep and would not start. Before the panic generated by the situation, I searched the forums where I found several cases that refer to the same problem and the insinuation that makes LENOVO about the customer's responsibility to avoid recognizing the warranty.

I was not looking for a BIOS update, it was recommended by ThinkVantage System Update, the software executed it and damage the equipment.

Besides being a damage caused by the ThinkVantage System Update, the situation gets worse when the answer given by support insinuates that the customer turn off the computer, so it is a CID (Customer Induced Damage) and therefore the guarantee does not cover it. I do not understand how LENOVO may imply that the responsibility of the customer. Really disastrous.

In conclusion, if you are not needing to make a BIOS update, it is preferable to omit the BIOS update messages given to ThinkVantage System... Read more

More replies
Answer Match 88.2%

Tried the following:
1. Update works if I bypass the router, ie. connect the PC directly to modem.
2. It also works from different ISP, through router (at work).
3. Format disk & Reinstall windows 7

From windowsupdate.log:
2011-12-01 00:03:54:771
968 99c
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://download.windowsupdate.com/v9/windowsupdate/redir/muv4wuredir.cab>. error 0x80072efd
2011-12-01 00:03:54:771
968 99c
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
2011-12-01 00:03:54:771
968 99c
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
2011-12-01 00:03:54:771
968 99c
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
2011-12-01 00:03:54:771
968 99c
Misc WARNING: DownloadFileInternal failed for http://download.windowsupdate.com/v9/windowsupdate/redir/muv4wuredir.cab: error 0x80072efd
2011-12-01 00:03:54:771
968 99c
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
2011-12-01 00:03:54:771
968 99c
Misc Microsoft signed: Yes
2011-12-01 00:03:55:863
968 99c
Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <127.0.0.1:80> Bypass List used : <(null)> Auth Schemes used : <>
2011-12-01 00:03:55:863
968 99c
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://download.microsoft.com/v9/windowsupda... Read more

A:Can't update Windows 7 - Windows Update Client failed to detect with error 0x80072efd

Hi,
 
Try to remove the proxy server entry from the WinHTTP proxy configuration for Windows 7:
 
1.   
Click Start, and then type cmd in the Start programs and files box.
2.   
Right-click cmd.exe in the Programs list, and then click Run as administrator.
Note If you are prompted for an administrator password or confirmation, type the password or click Continue.
3.   
Type the following command and then press Enter:
netsh winhttp show proxy
Note The proxy setting is listed next to Proxy Server. If there is no proxy server, Direct Access <no proxy server> is shown in the Command Prompt window.
4.   
To remove the listed proxy setting, type the following command and then press Enter:

netsh winhttp reset proxy
5.   
Click Start, click All Programs, click Windows Update, and then try to download and install updates again.Alex Zhaozx
TechNet Community Support

2 more replies
Answer Match 86.52%

Hello, I got this Dell OptiPlex GX280 small form factor PC.
My bios is A05, the latest is A08 if I search using google on dell site.
However my PC code [Admin note, service tag removed] TD and Dell site give no such product.

More replies
Answer Match 86.52%

L.S.,

When I try to uninstall my old version of Java via Add/Remove programs it uninstalls all the way through, but at the last moment comes with the following message: Internal error 2330 . 23 C:/programs files/java/jre1.5.0_02/bin/client.

I cannot find anything about this on the web? Do you have any suggestions?

Thanks, KoosHopeloos

A:Unable to uninstall Java 5 update 2: internal error 2330. 23

Hi

Thats a Windows Installer error.

"Internal Error 2330: Error getting file attributes: [3] GetLastError: [2]"

Which version of Windows Installer do you have?

You can go into C:\Program Files\Java and delete that folder. It will delete the software from your computer as long as its not running.

Then if you download the latest update 10.. jre 1.5.0_10, it will overwrite the necessary keys and you should be fine.

Latest Java Runtime Environment: J2SE(TM) Runtime Environment 5.0 Update 10 has been released
Latest Flash version (if you don't yet have it): Flash 9.0.28.0 has been released

See if that helps

4 more replies
Answer Match 84.84%

I have a Pentium 4 system I built about 2 years ago. The system has been stable and running smoothly...until today. There were a number of XP Security updates that needed to be installed, so while I was working on a different PC I decided I had time to install these updates. The update installation routine ran without problem until time to reboot. I gave the okay to reboot, and returned to my work on the second PC.

After several minutes I noticed that the screen was blank, as if the PC had shut down. I started to hit the start button, but noticed that the power light was on. After checking things out (all cables plugged in, etc.), I hit the start button. The PC shut down and then restarted. I got the intel boot screen, heard a single beep from the motherboard and then...nothing. I repeated these steps twice with no change.

Finally, I unplugged the PC, waited 30 seconds, plugged it in and rebooted. This time, after the intel screen and beep I see text that says "Flash Update Failed. Press F4 to continue" or something very similar. I pressed F4, but nothing but a black screen with a horizontal cursor flashing in the upper left corner.

This sounds like a failed bios update, except that I was not updating the bios. There were no disks in any drive and I had not downloaded a bios update. I also keep my PC reasonably secure, running ZoneAlarm, Symantec A/V Corporate, and WebRoot SpySweeper with fresh updates and recent scans.

So....does anyone have any ideas here? Doe... Read more

A:Failed Flash Update Error

9 more replies
Answer Match 84.84%

i have not so mutch to give more then i have problem patching all my games. it pop upp says Failed to update host, both for NeverWinter,SWTOR,Tera,Wow.

and what happen is that i run the game---> patch loading for (1sec)----->Close---> (window) with the error Failed to update host ----->(Klick OK) ---->>> same thing over again

i guess some thing happend when i flushed the DNS. would some one like to help me i would really be glad ! thx .

More replies
Answer Match 84.84%

Hello,

I'm receiving an Error on Windows startup:





Registry update failed



When I click OK, it shows UserInitialisationDone error:





System\CurrentControlSet\Services\TBUPDDNT\Parameters



What does it all mean?

Thanks.

A:Registry update failed Error

Originally Posted by Irina


Hello,

I'm receiving an Error on Windows startup:





Registry update failed



When I click OK, it shows UserInitialisationDone error:





System\CurrentControlSet\Services\TBUPDDNT\Parameters



What does it all mean?

Thanks.



Hi Irina

I think that an entry is incomplete
Have you installed/uninstalled new software recently?
Try using CCleaner registry cleaner
If this fails a system restore might help

I hope this helps

Pooch

10 more replies
Answer Match 84%

This one has me boggled. I've searched high low looking for a solution to this issue without any success thus far. As the title of the thread say, I've been unable to install SP1.

Link to my CBS directory (zipped): https://skydrive.live.com/redir?resi...6E21F538FA!107

SFC /SCANNOW reported no errors.

Let me know if you need anything else and thanks for the help.

The error message says, "Windows Update encountered an unknown error"

A:Win 7 x64 SP1 Update Failed, Error Code 80070002

There's no sign in your CBS.log file that SFC actually ran.
an 0x80070002 error is actually a 'File not found' error, and often means that a registry entry is pointed in the wrong direction, rather than that a file is missing.

Is your machine showing any other signs of problems?

9 more replies
Answer Match 84%

Everytime i boot my laptop, windows update automatically download newest update and only this one is failed. Its almost 10 times i retry to redownload and install but always failed. There's no problem with my internet connection and my PC successfully install this update.
I used windows 10 pro edition i upgrade it from windows 7.
Here some screenshot might help
I need your guys help. Thanks ..

A:Windows update failed error 0x8020002b

​I am having problems too and just replying to this thread since I don't feel like starting a new one.

2 more replies
Answer Match 84%

My computer fails to install the update for windows 7 for 64x-based systems (KB2761217)

The error code is 8007065E

I've tried the windows fixit program and the problem still persists.

Attached is the CBS.log

Can I get some help please =)

A:Windows 7 update failed. Error 8007065E

The problem is this...

Code:
2013-11-03 09:07:39, Info CBS Read out cached package applicability for package: Package_for_KB2584146~31bf3856ad364e35~amd64~~6.1.1.3, ApplicableState: 112, CurrentState:112
2013-11-03 09:07:45, Info CBS Session: 30333086_301750403 initialized by client WindowsUpdateAgent.
2013-11-03 09:07:45, Info DPX Started DPX phase: Resume and Download Job
2013-11-03 09:07:45, Info DPX Started DPX phase: Apply Deltas Provided In File
2013-11-03 09:07:45, Info DPX Ended DPX phase: Apply Deltas Provided In File
2013-11-03 09:07:45, Info DPX Ended DPX phase: Resume and Download Job
2013-11-03 09:07:45, Info DPX DpxException hr=0x8007065e code=0x020217
2013-11-03 09:07:45, Info CBS Failed to extract file update.mum from cabinet \\?\C:\Windows\SoftwareDistribution\Download\8de8eccc51302e3ad3cd631c70492dc1\windows6.1-kb2761217-x64-express.cab [HRESULT = 0x8007065e - ERROR_UNSUPPORTED_TYPE]
2013-11-03 09:07:45, Info CBS Failed to extract package manifest from cabinet [HRESULT = 0x8007065e - ERROR_UNSUPPORTED_TYPE]
2013-11-03 09:07:45, Info CBS Failed to initialize internal package [HRESULT = 0x8007065e - ERROR_UNSUPPORTED_TYPE]
2013-11-03 09:07:45, Error CBS Failed to create internal package [HRESULT = 0x8007065e - ERROR_UNSUPPORTED_TYPE]
2013-1... Read more

5 more replies
Answer Match 84%

I have been trying to install the latest windows 7 updates for several days and all of them (14) keep failing. The same error is received for all of them, Error 8000ffff. I researched what the updates were for and it looks like they are for Windows 7 x64, I have Windows 7 x86. Also, just before this happened I started getting an error message that my windows was not genuine. But I ran the activation and it says it is genuine (I have had Windows 7 Professional for a couple of years). I did some googling and ran into several post that suggested uninstalling KB971033 (for the windows not genuine error), so I did that and the error message no longer shows.

The windows Malicious Tool update worked just fine.

Any ideas?

A:Windows 7 Update failed error 8000ffff

Uninstalling KB971033 just hides the problem, it does NOT solve it.
Please reinstall KB971033 from http://support.microsoft.com/kb/971033 and then post an MGADiag report.


Please follow this tutorial and post an MGADiag report - then we can see what the problem is.

http://www.sevenforums.com/windows-updates-activation/234159-windows-genuine-activation-issue-posting-instructions.html


Please also state the Version and Edition of Windows quoted on your COA sticker (if you have one) on the case of your machine (or inside the battery compartment), but do NOT quote the Key on the sticker!
http://www.microsoft.com/en-us/howtotell/Hardware.aspx

5 more replies
Answer Match 84%

Hello everyone!

First:

I'm new in here and not an native speaker, so please don't beat me if not everything is 100% correct. :P
Just correct me, thank you!

About my problem:

Sadly the list was too long for the title, so here is the list:

KBs:
KB2667402
KB2849470
KB2864202
KB2868038
KB2961072
KB2888049
KB2750841

Error codes:
Code 800B0100
Code 8024200D (as far as I know it could mean my PC shut off during an update)

Here some background infromations:

Two months ago someone destroyed my PC, since the beginning of august I'm finally able to build my new desktop PC. In this process I tried to reuse my old HDDs (bothe WD Green 2TBs, both work fine), which was succesfull. Shouldn't be to important but just to be safe.

In the process of preparing windows 7 (Professional x64) I had some driver problems (motherboard) because I tried to use my old boot drive.. in the end I newly installed Win7 on my SSD and it worked. Right now only the old boot drive isn't whiped.But so far I hadn't any problems because of that.

Afterwards I started updating. As far as I know the PC had once or twice a problem while updating. I think it shut off. At least once - I tried to reach the fan control of my pc-case and missed the right button (wasn't used to the new case).

In about this time the problems with the updating started. I think it was before I could do my first backup (sadly).
But I still think there is a solution.. even though it's hard.



My tri... Read more

A:Failed to update KB2667402 (and more) with two error codes

I've uploaded a file - mbaaa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.
Right-click on the downloaded file, and select Extract all…
Extract to the default location - which will create a new folder mbaaa in the same place.
Open this folder - there should be two folders inside it (Manifests and Packages)

Copy the content of the Packages folder to the folder
C:\Windows\Temp\CheckSur\Servicing\Packages

And the content of the manifests folder (.manifest files) into this folder:

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Now run the CheckSUR tool again (it may take a while)

Post the new CheckSUR.log file, and the CheckSUR.persist.log file.

9 more replies
Answer Match 84%

I have a Acer Windows 8 computer and its stuck on reverting update changes and restarting. It says "Failed configuring Windows Updates Reverting changes" then restarts and then does that again. I cannot go to the desktop. How do I fix this?

A:Windows 8 Failed to update reverting changes error

don't have a answer, but do have a suggestion ,its the weekend and all helpers are volunteers ,hang tough , someone will come along
some suggested reading in the meantime ,good luck
"Failure configuring Windows updates. Reverting changes. Do not turn off your computer" error when you try to install Windows updates

3 more replies
Answer Match 84%

I have had SP1 fail every single time since we got this damn laptop.
It's now affecting the rest of the computer, making updates pile up behind it.
I've been unable to update anything successfully since 12/25 and that was Security update for C++.

Besides running around the forums trying to figure this out, I've done nothing.
I've never done a "hotfix" or used a repair tool or anything really besides running a clean boot and clearing out some space in case that was the issue (which obviously it is not). I'm literally starting from scratch. I need guidance, I am so frustrated with this thing and I just don't have the will to go trying to fix it on my own.

I'm pretty tech savvy so I can navigate pretty well.. I just need to know where to go.

Give me some instructions so I can get this show on the road.
What do you need to help me? :P

Updates that are in queue now;
*Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 for x64- based Systems (KB2736418)
*Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 for x64-based Systems (KB2742598)
*Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 for x64-based Systems (KB2756920)
*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 [email protected] for x64 (KB2736428)
*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Window... Read more

A:Consecutive failed SP1 Update error 800B0100

Please follow the instructions in Windows Update Posting Instructions and post the results.

9 more replies
Answer Match 84%

Hi

I started up my computer yesterday and got a blue screen which sayed "Failure configuring Windows updates. Reverting changes. Do not turn off your computer". I decided to reinstall windows 8.1 from disk but I am now getting the RegSvr32 error box every time I start the computer. After a while I will also get the BAD_POOL_HEADER blue screen.

Any help would be great and I will certainly donate if the problem can be fixed. Thanks
 

A:RegSvr32 error and BAD_POOL_HEADER after failed update

not malware related so moved to W8
 

2 more replies
Answer Match 84%

Hi,
i am trying to install SP1 via windows update and it fails by giving error 800b0100.
i tried installing after antivirus and firewall disable. but same error.

Please help

A:Windows 7 SP1 update failed error 800b0100

Just in case our Richard {who is good with this particular Error problem} does NOT come to your rescue...
Please read through the link below.

Error Code 800B0100 when trying to install Windows Updates KB974145 - Microsoft Answers

5 more replies
Answer Match 84%

Windows update has not been able to install new updates for a couple of weeks. I first noticed this after getting a notification in my task tray saying that updates could not automatically install. However, updates will not manually install either.

I get the error "Windows Could not Search for New Updates" and error code 8024402C. (See attached screenshot).

I followed all the instructions in the Windows Update Posting Instructions Thread and have also attached my error log.

Please let me know what can be done to restore automatic updates. Thanks!

A:Windows Update Failed: Error 8024402C

Open Windows Update
Click on Change Settings
Select 'Never Update...'
Click OK
exit Windows Update
Now open Windows update again
Click on Change Settings
Select 'Update automatically'
Click OK
exit Windows Update
Open Windows Update, and do a manual Check for Updates.
If it still fails, please post an MGADiag report - it may show what the problem is, even if the tool isn't strictly applicable here.
Please follow this tutorial and post an MGADiag report - then we can see what the problem is.

http://www.sevenforums.com/windows-updates-activation/234159-windows-genuine-activation-issue-posting-instructions.html
Please also state the Version and Edition of Windows quoted on your COA sticker (if you have one) on the case of your machine (or inside the battery compartment), but do NOT quote the Key on the sticker!
http://www.microsoft.com/en-us/howtotell/Hardware.aspx

Ignore errors produced when clicking on the Copy button - they simply mean that the tool could not create the backup files for some reason. The data is still copied to the clipboard for pasting to your response.

1 more replies
Answer Match 84%

800b0100 is the only code that is poppin up. hopefully I did all of this correctly. thanks

A:Windows Update Failed error 800b0100

Here's the SFC error...

Code:
2015-07-31 11:26:20, Info CSI 00000326 [SR] Repairing 1 components
2015-07-31 11:26:20, Info CSI 00000327 [SR] Beginning Verify and Repair transaction
2015-07-31 11:26:20, Info CSI 00000328 Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-imagingengine_31bf3856ad364e35_6.1.7601.17514_none_2df065c88c5d1cef\ImagingEngine.dll do not match actual file [l:34{17}]"ImagingEngine.dll" :
Found: {l:32 b:gexYj1iOf5gx9+qYGp8EzvA0G1rfqclgNeXCyfJP/vc=} Expected: {l:32 b:9zLwUwp//Wxn/3dHYBdLjgE3fcEIWUIhWHDIUjXxHGE=}
2015-07-31 11:26:20, Info CSI 00000329 [SR] Cannot repair member file [l:34{17}]"ImagingEngine.dll" of Microsoft-Windows-ImagingEngine, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
There are no apparent errors in the CheckSUR log - but we may need to revisit that later.

I'll post a fix protocol for this error a bit later.

2 more replies
Answer Match 84%

Hi,
I've tried to install the sp1 update several times now, allways getting the error 800b0100.
I read up on the problem in several forums but nothing has worked for me. I ran the System Update Readiness Tool but I still can't install the update.
Hoping for some help here.

A:Windows 7 SP1 update failed error 800b0100

Please refer to the below links...

Error Code: 0x800B0100 - Can't install SP1 - Microsoft Answers

Error code 0x800B0100 when using Windows Update or Microsoft Update to install updates

Error Code 800B0100 when trying to install Windows Updates KB974145 - Microsoft Answers

Windows Update error 800B0100

3 more replies
Answer Match 84%

Hi

I started up my computer yesterday and got a blue screen which sayed "Failure configuring Windows updates. Reverting changes. Do not turn off your computer". I decided to reinstall windows 8.1 from disk and then update to windows 10 but I am now getting the RegSvr32 error box every time I start the computer. After a while I will also get the BAD_POOL_HEADER blue screen.

Any help would be great and I will certainly donate if the problem can be fixed. Thanks
 

A:RegSvr32 error and BAD_POOL_HEADER after failed update

6 more replies
Answer Match 84%

I got error code 9c48 when trying to install the important update for IE9. Not only has the update failed, but it has caused IE9 to be inoperable, resulting in NO browser. I can't seem to find any solution. Please help.

A:IE9 Update Failed - Error code 9c48

Try a system integrity scan
RUN > CMD > SFC /SCANNOW

Also try using firefox to access the net,then uninstall IE & download to install IE9 again.

You can try rolling back to your previous ver as well.

2 more replies
Answer Match 84%

Hello,
I have been having problems installing 4 Important Security Updates and 3 optional updates onto my machine. I have tried to install them several times since they was released, but every time I get the same Error Code: 800B0100. They are the following:

Important:
- Cumulative Security Update for Internet Explorer 11 for Windows 7 for x64-based Systems (KB3021952)
- Security Update for Windows 7 for x64-based Systems (KB3004375)
- Security Update for Windows 7 for x64-based Systems (KB3023562)
- Security Update for Windows 7 for x64-based Systems (KB3031432)

Optional:
- Update for Windows 7 for x64-based Systems (KB2574819)
- Update for Windows 7 for x64-based Systems (KB2592687)
- Update for Windows 7 for x64-based Systems (KB2830477)

I have followed the steps from your "Windows Update Posting Instructions", and I have attached the logs to the thread as well. However, the CBS.log will not allow me to read it so I created a new sfcdetails.txt file on my desktop and included it with the zipped folder instead of the true CBS.log file (I hope that is alright). There were also "CbsPersist" Cabinet Files in the Logs/CBS folder which made the zipped file much too large so I did not include them. Let me know if you do need them and I can put them on my google drive and give the link.

Thanks!

A:Windows Update Failed Error 800B0100

Here's your CheckSUR error list

Code:
Summary:
Seconds executed: 1988
Found 30 errors
CBS MUM Corrupt Total count: 15
CBS Catalog Corrupt Total count: 15
Unavailable repair files:
servicing\packages\Package_102_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_102_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_103_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_103_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_104_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_104_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_105_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_105_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_108_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_108_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_109_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_109_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_110_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_110_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_111_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mum
servicing\packages\Package_111_for_KB3023562~31bf3856ad364e35~amd64~~6.1.1.2.mu... Read more

6 more replies
Answer Match 84%

HI all,

Just registered after seeing a similar thread on here to the issue I have.

I have a laptop with 7 Home premium 64 bit SP1 that is up to date with the exception of an IE9 update that refuses to install at all.

Have tried various different methods but to no avail including attempting to remove IE9 and then try a reinstall.

Uninstall hasn't been possible. Any help would be much appreciated.

Attachment 256916

Attachment 256917

A:Win7 64 Update failed Error 9C48

Hello adz76 and welcome to the forums

I've never seen a 9C48 error code from these problems before! Thank you for all of the logs, they are very helpful.

Windows Update Package Replacement

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Please download the attached file, Packs.zip and save this to your Desktop.
Right-click on the file and select Extract All...
Tick the box labelled Show extracted files when complete then click Extract
A window will open showing two folders, Manifests and Packages
Open the Manifests folder and copy the files into the following folder (if there are any files)

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Open the Packages folder and copy the files into the following folder (if there are any files)

C:\Windows\Temp\CheckSur\Servicing\Packages

Run the System Update Readiness Tool (SURT) again
When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:

C:\Windows\Logs\CBS\CheckSUR.persist.log
You will probably be shown the error code 0x8024200D after performing this fix, if so, please download and install the update from this link. It must be downloaded using Internet Explorer.

Download Cumulative Security Update for Internet Explorer 9 in Windows 7 x64 Edition (KB2675157) from Official Microsoft Download Center

I... Read more

3 more replies
Answer Match 84%

Hello all. I've been having a similar problem to what has been addressed here already and I was hoping that I could get some help.

I am running IE10 on Windows 7 Home Premium (64bit) and haven't really been having any problems except that Windows keeps trying to update to IE10 and when I let the update run it fails with error code 9C48.

I think the update keeps coming back because (1) in Windows Features it only shows IE9 and (2) in the installed updates it only shows IE9. I've tried uninstalling IE10, but there is nowhere to execute an uninstall command (no version of IE shows up in the Remove Programs menu in Control Panel).

I would like for the auto update to go away because these three features are synched (auto update, windows features and installed updates) rather than hiding the update and running the IE Update Blocker.

I have attached the CBS log and a screenshot of the error.

Thank you in advance.

Attachment 302959
Attachment 302958
Attachment 302960
Attachment 302961

A:IE10 Update Failed - Error 9C48

Both CheckSUR and SFC are free of problems - so we'll have to look elsewhere.

It may be a case of attempting to rip IE10 out by the roots...
command line uninstall IE10 on W7 may help with that.

Please post the C:\Windows\windowsupdate.log file and all IE*.log files

5 more replies
Answer Match 84%

I have Windows 7 with Internet Explorer 11 and I have done a Windows update with errors with Code 80200010 and Code 80246005 What are they to do with and what do I need to get to install successfully?

A:Windows Update two Codes error failed

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

4 more replies
Answer Match 84%

Hello, I am having a small issue with Windows update. Windows 7 Home Premium, 64BIT OEM on HP Pavilion.

Window Update failing error code 800736B3

I have followed the SFC, update readiness, and clean boot procedures listed in the thread I linked above. I believe I have a SIMILAR issue (not the same).

Can anyone give me a light in the proper direction?

SFC found nothing, readiness tool ran and installed hotfix but did not fix issue. I also tried to install updates 1 at a time, to not avail, as well as the clean boot.

Based on my checksur log, I have the following:

Checking Package Watchlist
(f) CBS Watchlist Package Missing 0x80070002 Microsoft-Windows-Embedded-SKU-Foundation-Package~31bf3856ad364e35~amd64~~0.0.0.0 Microsoft-Windows-InternetExplorer-Package~31bf3856ad364e35~amd64~~10.2.9200.16521 Package registry presence failed, possibly an orphaned package on package watchlist

But I am unsure where to go or how to continue at this point. Any sugegstions?

More replies
Answer Match 84%

I am having a problem when I google. Most times a page comes up that says file has been moved to :-. If I click back it goes to the page I was expecting to go to. I try to update my AVG but gets most of way through and comes up "Update failed, General error."
Please can anyone help.
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 22:08:37, on 05/04/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\PROGRA~1\AVG\AVG10\avgchsvx.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\AAWService.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\LogiShrd\LVMVFM\LVPrcSrv.exe
C:\Program Files\AVG\AVG10\avgwdsvc.exe
C:\Program Files\Common Files\LogiShrd\LComMgr\Communications_Helper.exe
C:\Program Files\Common Files\Java\Java Update\jusched.exe
C:\Program Files\AVG\AVG10\avgtray.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Nokia\MPlatform\NokiaMServer.exe
C:\Program Files\Logitech\QuickCam\Quickcam.exe
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Microsoft ActiveSync\wcescomm.exe
C:\Program Files\Skype\Phone\Skype.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Program Files\Common ... Read more

More replies
Answer Match 83.16%

Hi Guys, i've just updating my BIOS and when it goes to 49%, my computer suddenly... HANGS! now when i boot my pc, my monitor just goes BLACK... forever. what can i do?!!! how to fix BIOS?!!?!
 

A:HELP! BIOS Update Error!!!!

...... I know now, that any interruption during flashing the BIOS would cause fatal error and it must be replaced.... ....and there's no way to fix damaged BIOS...
 

3 more replies
Answer Match 83.16%

I'm updating to the Amazon 3.11 Bios for HP Pavilion 7955. I create a boot disk with the changes on it and reboot. It's supposed to give me an option of "minimal boot" according to the instructions, but just goes straight to the A;> prompt. Then when I type in BIOSupdt it appears to run but aborts with the error message "cannot find BIOS's hook" I can't find anything about this error message anywhere.

A:bios update error

I think you've missed something in the update instructions. Rather than just tell you what it is, I want you to go back through those instructions until you understand them thoroughly, step by step. A bios flash must be done correctly or you can turn a useful and working computer into a complete boat anchor. The Bios flash is an easy process, but also very exact. I would also advise against using any of the windows O/S Bios utilities for this process. Post again if you still have ????'s

1 more replies
Answer Match 83.16%

Hi, I updated my BIOS today and I am 100% sure it is the right one because it was for the motherboard that I have. Nothing major but I am having a few problems:

The screen resolution seems to set itself to 800x600 when it should be 1024x768. It does this every so often when I turn on my computer.

I can't save any BIOS setting e.g. I noticed it was trying to find a floppy drive so I went in to the BIOS and disabled the floppy settings then saved and exited. It still tried to find it and it was the same as before in the settings.

Any suggestions.

Thanks.
 

A:BIOS update error

12 more replies
Answer Match 83.16%

Recently I got into the device manager while doing some changes and found that the lenovo firmware had an error, saying that it cannot start. I rolled back the driver to the microsoft driver, which works fine now. I went and downloaded the update for my notebook and started to install. I started, clicked yes that i was sure for the laptop model, and got an error. Error states "Runtime Error (at1:708): Out of string range." I did some googling but nothing like this. I tried redownloading the program and received the same problem. Any ideas what could be causing this / how to fix this? Currently running Windows 10 x64, the notebook is a Lenovo Edge 2 1580.

























runtimeerror.png ?4 KB

More replies
Answer Match 83.16%

HELP! having trouble since updating my Mainboard bios...:-(

ASUS P4S800D

hadn't updated the bios since initial install from MB CD. (Bios version 1005.002)
Went to main ASUS site and downloaded update 1011, but ever since then PC is wieding out! now when press shutdown, hybenate etc. it restarts...tried to rollback to older bios but have same problem

also the CD Rom and DVD rom are not responding anymore (unless I go to their properties and press "populate"?)

Any help...much appreciated!!
 

A:Bios update error

Welcome to Techspot!
It sounds like your machine was fine before the Flash, if this true, you have just learned Rule # 1 about updating.
If it ain't broke don't fix it.Generally Flashing rom files is very touchy business, and those updates are for specific problems. If you are not experiencing those specific problems you really should not do it.
Have you tried to Clear your CMOS ?
How many update files are availible between the file you had and the file you updated to?
If there is at least 1 file in this group, I would try it.
Also, if your bios is recognizing the Rom drives properly. Then just uninstall the drives in device Manager and reboot , this will force Windows to reinstall them properly.
 

5 more replies
Answer Match 83.16%

I am trying to update my BIOS to TRY to run my new processor and I keep getting errors like "IHISI get support mode failed" and "The utility has detected your notebook pc was resuming from standby." Help me please!!

A:Error trying to update BIOS

hi,are you 100% sure its the right update for you computer ,
did you try disabling the standby mode before you try the bios update .
care to share the make and exact model of the computer ,
does the update say it will offer support for your new cpu .

1 more replies
Answer Match 83.16%

I have been trying to update windows 7 for a few days now and i have been getting the same error message over and over again. I only have 1 important update left and like 10 optional updates. The important update is KB295664, and most of the optional ones are similar. I tried to repair network frame and nothing

A:Windows Failed to update,Error code 80070643

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

1 more replies
Answer Match 83.16%

I recently did a factory restore to get rid of some malware and now for some reason updates aren't going through properly.
Everytime i shut down my computer i have 85 updates and they all fail except two.
But the error code is Code 80071A2D

Almost all the updates are Security updates.

A:Windows Failed update Error code 80071A2D

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CBA files, for a number of reasons)

1 more replies
Answer Match 83.16%

automatic microsoft update continued to fail on everyday from Feb 16th and today i tried to do manual update [Microsoft .NET Framework 2.0 Service Pack 1 (KB110806)]. I received a error:Error Code: 0x80246008.

The Microsoft Help asked me to start BITS (Background Intelligent Transfer Service) and I received an "cannot start the Background Intelligent Transfer Service on Local Computer. Error 126: The specified module couldnot be found"

Please help me. What I can do to resolve this error? I am actually using Win XP (servicepack 2). why the update is installing servicepack 1?
 

A:Solved: Microsoft Update failed-BITS Error

7 more replies
Answer Match 83.16%

I have been getting help from Arc over on the BSOD section of this forum site for a few weeks now. I figured I'd start a thread here about the update troubles I've been experiencing over the past few days as well. There is one update that won't apply no matter what I try. I've run the amalgamated .bat tool posted on this forum and that didn't solve my issue. I will let my logs and screenshots speak for themselves from here, though.

Thanks in advance for any help!

As stated in the title, error code is 80073712. Also, I can't seem to get my CBS logs to upload. I keep getting an internal server error about the resource not being available. The screenshot attached perfectly fine. I will try to either edit this post to add them or add them as a comment.

Attachment 298869

A:Security update failed, error code 80073712

Still can't get the CBS.zip to upload. I will attach a screenshot of the error page. I'll try it again later.

Attachment 298870

8 more replies
Answer Match 83.16%

Hoping someone can help me here. I have seen Noel DP post several resolutions but each seem custom to the errors the other user gets.

I ran SFC/Scannow with no errors. Ran Checksur and got errors.

Unavailable repair files:
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.mum
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.mum
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.cat
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.cat

CBS log and CheckSUR Log attached.

A:Windows Update failed error code: 800F0900

This sounds to me like you may have to try going in and deleting the windows update catalog files and re running windows update and see what happens. If that doesnt solve the issue post back and we can take it from there.

9 more replies
Answer Match 83.16%

OS is Vista Home Premium. Windows Update fails when trying to install KB980248. I can download the Update KB980248 manually, but the installation fails. The error code is 80070020.

A:Update KB980248 failed error code 80070020

Happy Holidays

The error indicates that the process is being used by another program
Perform a clean boot to determine the source of the other use.
http://support.microsoft.com/kb/929135

The above procedure should solve your problem. If it does not and you are certain that you follwed the procedure correctly, try these methods. Ask about method 1, above if you have questions, it should work

How do I reset Windows Update components?
Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, for Windows 7, and for Windows Server 2008 R2
Cannot Update Windows using Windows Update

If it were my computer I would turn off the firewall and anti virus to start. I feel that one of these two are the problem

3 more replies
Answer Match 83.16%

I've been getting the 9C59 error for a while with the Windows automatic updater. I've attempted a manual update of IE 10, but had the same error. Not sure where to go from here.

I've attached the CBS file.

Thanks.

Dennis

A:IE 10 Update Failed - Windows 7 - Error Code 9C59

CheckSUR found and fixed a large number of errors - but there are still a couple of errors remaining, which it may be able to fix if you run the tool a second time. Please post (just) the new CheckSUR.log file afterwards.

There are a couple of errors in the CBS.log which may relate to the errors outstanding in the CheckSUR - so we need to get those fixed first, and only then see if it's affected the SFC/CBS results.

9 more replies
Answer Match 83.16%

help i am trying to update my vista 32 bit and when the program is searching for a update, i get the error code and it says " windows update encountered an unknown error." code 80070424 please help me solve my problem

A:Help! update search failed error code 80070424

Please read thoroughly this one:Windows Update Error 80070424

If described steps are too hard to follow then please prepare log from VistaSysInfoTool (select all) VistaForums SysInfo Tool

Log attache to post

5 more replies
Answer Match 83.16%

Hello
I'm trying to install this update KB978637 and it always gives the 800B0100 error. I already installed the system readiness tool but I still have the same problem. Can anyone help out? I have on attachment the log files. It seems that some files are corrupted, but how do I replace them? This is a clean install of windows 7.
Cheers.

A:Update KB978637 failed to install - 800B0100 Error

Here is a bit sophisticated because you have coruupted not only in C:\Windows\Servicing\Packages but also in C:\Windows\WinSxS\Manifests

I attached to post corrupted files according to path they should be placed






Quote:
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-wow64_31bf3856ad364e35_6.1.7600.20602_none_c4f7d8ca09dfa6fb.manifest
winsxs\manifests\amd64_microsoft-windows-wow64_31bf3856ad364e35_6.1.7600.16491_none_c40bea82f10bec2c.manifest
winsxs\manifests\wow64_microsoft-windows-wow64_31bf3856ad364e35_6.1.7600.20602_none_cf4c831c3e4068f6.manifest
winsxs\manifests\wow64_microsoft-windows-wow64_31bf3856ad364e35_6.1.7600.16491_none_ce6094d5256cae27.manifest
servicing\packages\Package_1_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_1_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB978637_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB978637_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_1_for_KB978637~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_1_for_K... Read more

5 more replies
Answer Match 83.16%

I'm trying to install update KB2639308 but it keeps saying that it fails and gives me the error code WindowsUpdate_FFFFFFFE. I looked it up online and it says that it can't update because of malware. However, when I run Norton and do a full system scan it doesn't find anything. I also tried to fix it with the Windows Update Troubleshooter and that doesn't help either. Is there anything else I can do without having to fully reinstall Windows 7 like the info on the site says? Please help.

A:Failed Windows Update, error code WindowsUpdate_FFFFFFFE

Hi,

A pre-requisite for this update is having Service Pack 1 installed. Can you confirm that this is the case?

Also, which version of Norton are you running? Is it the very latest? I have found posts where running Microsoft's own MSE doesn't find any malware, yet the error this occurs, so lets try something totally different:

Please perform an online virus scan using ESET
ESET Online Scanner

Can you also please run this tool to allow us to diagnose any other conditions that might prevent this update installing:

http://go.microsoft.com/fwlink/?linkid=52012

1. Click the Continue button.
2. Click Copy button (ignore any error messages if they appear)
3. Paste the results here in your next reply

Regards,
Golden

4 more replies
Answer Match 83.16%

Hello, I've been have several issues with my laptop ever since I swapped over my faulty C drive by Ghosting it onto another HDD. My troubleshooters all fail to run when I try to start them and Windows Update will not work despite the fact that I've checked and re-checked that the service is running. I've run sfc twice now with reboots in between and I've tried to repair install windows 7 using the tutorial provided by this forum, but I keep running into errors while trying to fix the problem.

I do not want to run a clean install unless I absolutely have to, but repairing it doesn't seem to work. I have the CBS log and the error codes from the troubleshooters if you need them.

A:Windows 7 repair install failed; error when trying to run Update

Start by running a couple of Startup Repairs to make sure the boot files are in order.

Post back a screenshot of Disk Management - Post a Screen Capture Image - Windows 7 Help Forums.

Did the clone hold activation after cloning? Check at Computer>Properties activation link.

If these are okay, then let's move to addressing the UPdates. Try each of these tutorials:
reset Windows Update components
System Update Readiness Tool fixes Windows Update errors in Windows 7, Windows Vista, Windows Server 2008 R2, and Windows Server 2008
Windows Update - Reset - Windows 7 Forums

Report back the results of each of these steps.

Is this the original Asus factory preinstall with the bloatware and duplicate utilities that have better versions built into Win7? If so this is a corrupt install to begin with that smothers Win7 native performance. So I'd stronglly consider doing the superior Clean Reinstall - Factory OEM Windows 7 as you'd go from one of the worst possible installs to one of the best. Once you've done it you can preserve a backup image so you never have to do it again.

1 more replies
Answer Match 83.16%

I have a desktop computer that is running Windows Vista. I have Adobe Reader 9 and every time I turn on my computer, Adobe Reader says it is ready to install an update to address customer issues and security vulnerabilities. I click through to install it, and after a few seconds, it gives me this error message:

Error 1325. Documents is not a valid short file name.

I don't know what to do. I tried uninstalling Adobe 9 so that I could reinstall from scratch, but I got the same exact error message when I tried to uninstall the program from the Control Panel. I tried downloading Adobe X from the Adobe website, but got the same error there as well. I don't know what to try next, but this problem is bugging me and I don't know what it means.

Thanks for your help.
 

More replies
Answer Match 83.16%

I'm seeing this a few times now on PC that are set to upgrade , including one of my own
ASUS Windows 7 PC

The fix, appears to be to do the following - MS appears to be recommending the link on twitter

1. Go into "C:\Windows\SoftwareDistribution\Download" and delete everything in that folder.
2. Now, run the command prompt as an administrator. Type in "wuauclt.exe /updatenow".
3. Go to your Control Panel > Windows Update and your Windows 10 should start re-downloading from scratch, hopefully without flaws this time.
https://www.reddit.com/r/windows/comments/3eyrre/fix_for_the_80240020_error_when_trying_to_install/Click to expand...

Some sites also recommend emptying the recycle bin as well before running the Command Prompt

http://answers.microsoft.com/en-us/...owsSupport_20150729_215691052&linkId=15931699

I'l edit back in a few hours , as my PC has now started to download the files again 2,712.6 MB -
It already has the hidden files - loaded on the 29th
$windows.~BT
$windows.~WS
Under C:/
 

A:10 upgrade - Update Failed Error Code 80240020

9 more replies
Answer Match 83.16%

Hello sevenforums, Today I installed 8 important updates one failed - "Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2898785)". I use firefox should I ignore the failed update or make sure that it is installed properly so I don't cause future problems. The update is "Important" it says so i the view installed updates.

One of the 8 updates was - "Internet Explorer 11 for Windows 7 for x64-based Systems" I uninstalled IE11 because it messed up my weather desktop gadget, and I didn't plan on using IE11.

I tried the standalone installer for the failed updated and got the "this update is not applicable to your computer" message. The only thing I can think of doing now is using system restore and trying to install the updates again. My antivirus was not disabled during the installation of the updates. Should I disable it? It never caused problems with any of my previous updates.

Thank you for any help.

Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2898785)

Installation date: ‎12/‎10/‎2013 11:46 AM

Installation status: Failed

Error details: Code 80242016

Update type: Important

A security issue has been identified in a Microsoft software product that could affect your system. You can help protect your system by installing this update from Microsoft. For a complete listing of the issues that are included in this update, see the asso... Read more

A:Failed IE9 Cumulative Security Update, error 80242016

Sorry - seems your post got lost in the rush!


Please follow the Windows Update Posting Instructions and post the requested data

1 more replies
Answer Match 83.16%

This appears to be a language pack error. Failed to update error 00000002 What is that even mean? I typed in this error code here and get no matched results 130 views so far and no one has any idea? HeLp? And thank you!

A:Security Update for Microsoft .NET Framework 1.1 SP1 Failed error 2

try to disable the firewall, check if there is any other security software , you should not have more than 1 security software. email me if the problem persist again

3 more replies
Answer Match 83.16%

I've haven't been able to install this update 'Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2943357)'
It keeps coming up with an error code 80073712.

I am also getting an error 8004100E when trying to upgrade to Windows 10

Using the SUR tool I got the following log:

A:Security Update Failed Error code 80073712

You have rather a lot of errors there!

Code:
Summary:
Seconds executed: 124
Found 96 errors
CSI Manifest All Zeros Total count: 72
CBS MUM Corrupt Total count: 14
CBS Catalog Corrupt Total count: 10

Unavailable repair files:
winsxs\manifests\amd64_microsoft.transactions.bridge.dtc_b03f5f7f11d50a3a_6.1.7601.22733_none_65085bdd54b4a629.manifest
winsxs\manifests\amd64_wcf-m_sm_ins_rc_dll_31bf3856ad364e35_6.1.7601.22733_none_2795328d79930284.manifest
winsxs\manifests\amd64_wcf-system.runtime.serialization.ref_b03f5f7f11d50a3a_6.1.7601.22733_none_424d323c8e896dad.manifest
winsxs\manifests\amd64_wcf-icardres_dll_vista_31bf3856ad364e35_6.1.7601.18523_none_6f276a738180cba8.manifest
winsxs\manifests\amd64_wcf-system.servicemodel.ref_b03f5f7f11d50a3a_6.1.7601.22733_none_5ebf2b63339ef82d.manifest
winsxs\manifests\amd64_wcf-smdiagnostics_b03f5f7f11d50a3a_6.1.7601.18523_none_f5ee0756c06c09cd.manifest
winsxs\manifests\msil_system.runtime.serialization.resources_b77a5c561934e089_6.1.7601.22733_en-us_787b5545d9776103.manifest
winsxs\manifests\msil_smdiagnostics.resources_b77a5c561934e089_6.1.7601.18523_en-us_496526973f1e68f2.manifest
winsxs\manifests\amd64_wcf-m_sm_ins_rc_dll_31bf3856ad364e35_6.1.7601.18523_none_271663c8606d49a2.manifest
winsxs\manifests\amd64_microsoft-windows-wcfcorecomp.resources_31bf3856ad364e35_6.1.7601.22733_en-us_ff634b2369479517.manifest
winsxs\manifests\amd64_wcf-infocard_api_dll_31bf3856ad364e35_6.1.7601.18523_none_02011939c648dcfe.manifest
... Read more

9 more replies
Answer Match 83.16%

hi ..., i need help regarding the windows update issue.
i'm using windows vista business sp2 running on lenovo thinkpad sl300.
i want to upgrade my harddrive since i need a bigger capacity. so, i try to move my data on old harddrive to a new one.
i'm already try to migrate my harddrive several ways:
1. i try to clone my harddrive with sector by sector copy
2. i try to use rescue and recovery (utilities from thinkvantage)
3. i try to use backup and restore center (windows complete pc backup)
all of them give me the result, everything works just fine, except i no longer can run windows update and all related to it, for example microsoft security essentials.
i already try to fix the windows update with microsoft fix it
http://support.microsoft.com/kb/971058/en-us with normal and  aggresive mode, none of them works.
can anyone help me on this?Regards, Ferry Huang

A:Windows Update Failed Error Code 0xc8000247

but when i register the dll, there are some error saying the dll is missing or not valid (something like that),
maybe some DLLs are damaged.

Please start the command prompt (cmd.exe) with admin rights [1] and run sfc [2]:

sfc.exe /scannow

Is it able to find and repair broken files (create the txt file shown under [2] and look if all files are restored)?


best regards
André

[1]
http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token

[2]
http://support.microsoft.com/kb/929833 "A programmer is just a tool which converts caffeine into code"

Want to install RSAT on Windows 7 Sp1? Check my HowTo: http://www.msfn.org/board/index.php?showtopic=150221

36 more replies
Answer Match 83.16%

Hello, My windows update keeps failing on the same 5 updates with the error code 8024200D , This is really annoying me, I have tried everything on the internet i could find and nothing has worked, Can anybody help?, Thank you,

Sean.

Windows 7 Professional 64bit:

Windows 7 Service Pack 1 for x64-based Systems (KB976932)

Update for Windows 7 for x64-based Systems (KB2763523)

Update for Windows 7 for x64-based Systems (KB2533552)

Security Update for Windows 7 for x64-based Systems (KB2864058)

Security Update for Windows 7 for x64-based Systems (KB2620704)

A:Windows Update Failed, error code - 8024200D

Bump

3 more replies
Answer Match 83.16%

Hi,

I have encountered error code 800F0900 with the recent Windows Update process. The followings are my screen shots and CBS logs for your perusal.

Thanks for taking time to solve my problem.

Regards.
STLai

A:Windows Update failed error code: 800F0900

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

9 more replies
Answer Match 83.16%

Hi guys.

Thanks in advance

Legit copy of windows.

Removed 4 .cab's to get under 8megs.

Scannow clean.

A:Update KB2961072 failed error code 800B0100

Here's the error-lit from the CheckSUR scan


Code:
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7601.18489_none_35c7815175410855.manifest
winsxs\manifests\amd64_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7601.22705_none_36a3a0208e215d89.manifest
servicing\packages\Package_2_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2961072_SP1~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2961072_SP1~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_2_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2961072_SP1~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2961072_SP1~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.cat
servicing\packages\Package_for_KB2961072~31bf3856ad364e35~amd64~~6.1.1.1.cat
I'll post a fix protocol later.

9 more replies
Answer Match 83.16%

error code: 80075070
Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972211)
Download size: 12.8 MB

cbs.zip is 35mb max upload limit is 8mb

this is a laptop i have been removing addware on for a freind
it now seems to be working fine other than this one update

thanks

A:.NET Framework 3.5.1 failed to update error code: 80075070

Ok i deleted some of the files in the cbs folder to make it smaller and uploaded it
hopefully someone can reply now so i can get this laptop back to them

edit
nevermind
downloading the update from the microsoft website rather than relying on windows update seems to have fixed it

1 more replies
Answer Match 83.16%

I've done everything here with no fix: Error Code 0x80073712 occurs in Windows Update or Microsoft Update

I've done everything here with no fix: KB2919355 (Windows 8.1 Update) Fails (800f0092 and - Microsoft Community

These are the only solutions that i can find and i've done both of them and neither has worked or they've given me additional errors such as the troubleshooter just telling me it couldn't fix it and the second one saying invalid package.
In a week now i won't be able to get updates to Windows because of this stupid update so i'm desperate for help hoping that there is something i've missed over the 500 google search results i've gone through.
I also want to make it clear that I CAN'T WIPE THIS PC under any circumstances unless there is no other possible option. If it truly is the only option than I'll do it but it's going to be months until i have the time to actually do it.


I have tried the DISM healthrestore, it failed with:
Error: 0x800f081f
DISM failed. No operation was performed.


I have tried the dism /online /remove-package /packagename:Package_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14 it failed with:
Error: 0x800f0805

The specified package is not a valid windows package.

Again i need to make it very clear that i can't wipe my PC right now. It will be weeks if not months until i can wipe this machine and it is the only one i can use right now. And to be completely honest i shouldn't have to wipe my PC b... Read more

A:update KB2919355 Error 0x80073712. all fixes failed.

If you are still having a problem installing the latest KB2919355, zip up the files under c:\windows\logs\cbs and share them out on OneDrive, and I will take a look.

3 more replies
Answer Match 83.16%

Hello,
The windows update keeps offering me the same update (KB2887595) over and over again (even after I reboot). The installing information says it failed every time I try and after the attempt to install it says "Not needed"

Code:
Update for Windows 8.1 for x64-based Systems (KB2887595)
Installation date: ‎17/‎11/‎2014 21:51
Installation status: Failed
Error details: Code 80200056
Update type: Important
Install this update to resolve issues in Windows. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.
More information:
http://support.microsoft.com/kb/2887595
Help and Support:
http://support.microsoft.com



If that doesn't happend, I receive an error after trying to installed (still with Windows Update). Here is the details for that failed attempt:

Code:
Update for Windows 8.1 for x64-based Systems (KB2887595)
Installation date: ‎18/‎11/‎2014 00:24
Installation status: Failed
Error details: Code 80073712
Update type: Important
Install this update to resolve issues in Windows. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.
More information:
http://support.mic... Read more

A:Windows Update: Failed KB2887595 /error 0x80073712

Fixed after a using restore point previous to the first attempt install

1 more replies
Answer Match 83.16%

hello
about a month I have a problem with the updates of windows 7 professional 32 bit. When I turn on the PC, Windows tries to install an update, it hangs at 35% and the pc restarts 3 times before using it.
after, if I click on search updates, I have error code 8000ffff. I tried microsoft fixit but I have not resolved.

this is the file of MGA. please help me.. I'm going crazy...



Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-*****-*****-XFPHJ
Windows Product Key Hash: FjeWkdSWrMt3bkVKGJPOMAaHKUo=
Windows Product ID: 55041-089-9359655-86153
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {B95026A5-128F-4E02-8C35-F8020F3FBD27}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.120830-0333
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cac... Read more

A:Windows Update failed - code error 8000ffff

Open Regedit, - File - Export - save to desktop ( creates backup of your current registery

Then locate and remove:

HKEY_LOCAL_MACHINE\COMPONENTS\PendingXmlIdentifier
HKEY_LOCAL_MACHINE\COMPONENTS\NextQueueEntryIndex
HKEY_LOCAL_MACHINE\COMPONENTS\AdvancedInstallersNeedResolving
Reboot - then check for updates.

Source - Microsoft.

3 more replies
Answer Match 83.16%

hi

please could you advise on how to resolve the following

windows update error 80070490 (see cap)
kb2904266

w7 x64 sp1 home premium
acer 5742z 4gb 500gb
ie8
(not installed ie9,10 or 11 nor bing desktop)

SUR tool run
sfc /scannow stops at 12% see cap attached (see attached log)


machine appears to run ok
comodo av and firewall
malwarebytes anti exploit

malware bytes also ran no nasties found....

Thanks
jeremy

A:Failed Windows Update, error 80070490 re kb2904266

check out this link that hopefully may help ya out: December 2013 cumulative time zone update for Windows operating systems

9 more replies
Answer Match 83.16%

When trying to run windows update, I come up with an error number 0x80070424. I have tried to find help with this issue on the website but no luck. Anyone have any suggestions??? Thanks in advance.
 

A:WIndows update failed Error number 0x80070424

Have you been here:http://support.microsoft.com/default.aspx?scid=kb;en-us;830086
 

1 more replies
Answer Match 82.32%

Hi. I'm getting an error trying to run the latest BIOS tool. Update EC code version 1.31 Category Vendor Description Version Size Date  BIOSAcerUpdate EC code1.3113.1 MB2015/08/25 Once downloaded, extracted file, open folder > data folder open Z5WAH131 app I get error messageWarning:Current region DESC does not have R/W rights. I have run the program in both normal mode and with administration rights with no joy.I don't normally have issues updating BIOS. It is simply download, extract, run updater... the rest takes cares of itself. Not this time though 










Solved!
Go to Solution.

A:Aspire E5-571 BIOS update v1.31 Error

have you followed the instructions on the pdf file? you need to run the 2 .bat files to update to 1.31 version

8 more replies
Answer Match 82.32%

Hi I have a Lenovo ideacentre AIO 700. I tried to update the BIOS from O1KTT30AUS to the latest available on the product's driver and software page which is listed as O1KKT35A. Now when I boot I get an American Megatrends error message saying Error 0162: Setup data integrity check failure. It displays two options: Press F1 for SetupPress F2 to resume. The PC reboots and then Windows loads A-OK, but this process repeats everytime I reset my PC. In the Lenovo Setting app it shows my BIOS as still being O1KTT30AUS. Any help on how to fix this gratefully received!

More replies
Answer Match 82.32%

Win 10 64bit - I keep getting an error when I try to update the bios. Tried flash.bat and also running afuwinx64.exe P11-A3.CAP from an admin command prompt. Tried from a different folder as well. Same result.

More replies
Answer Match 82.32%

Hello.

My pc specifications:

os: windows xp sp 3 (but has a lot of software errors, especially microsoft frame)

ram:1.5 gb ddrram

gpu:256 mb gpu

cpu:2.8 ghz p4 (i have 3.2 too but the temperature goes so high with it)
Commannd set(i am writing this because x86 means i should install 64 bit?)
x86, MMX, SSE, SSE2

gigabyte GA-8IPE1000MK motherboard.


bios: Award BIOS iletisi Intel 865PE AGPSet BIOS for 8IPE1000MK F9
Award BIOS T?r? Award Modular BIOS v6.00PG

Are you looking for a BIOS Upgrade? Contact eSupport Today! (suggests that but it asks to pay money)





I instaleld win 8 to my brothers pc and (in specifications, it says win 8 needs at least 2 gb ram) it did not use so much ram. So i think i can use it.

I cant run win 8 advisor because i toldabout errors in windows. IT cant even update.

So, i tried to install win 8 yersterday but it gave error.
0x0005d

This means about cpu. My cpu doesnot support. About nx technology of it. But i read , i have to update my bios. SO i tried to update, there are 2 options, one of them save bios to floppy disk, other is update from floopy. How can i update my bios without floppy? I have floopy but i dont know if it still works.

Now i will install xp to run wi n 8 advisor.

Please help me. Nowi have all windows (from universtiy) xp vista 7 and 8 , even 8.1. But i want 8. This is old pc i know but xp has chronic software problems and i am bored of it. I am using for 6-7 years without f... Read more

A:Bios update and win8 error

If the PC is running Windows XP then I would advise to NOT update to Windows 8.

Chances are you will not be able to find any drivers for the system and it will cause issues.

Do not update the BIOS as choosing the wrong BIOS or updating incorrectly will cause the PC to become a big paper weight.

19 more replies
Answer Match 82.32%

Hi,

I have just tried updating my bios for my Asus P5B mobo. I downloaded the latest update from the Asus website, unzipped it and copied it to a flash usb drive and then restarted my PC. On restart I initiated the EZ flash, selected update and ran the new bios change.

Now however I can onyl start my computer in safe mode. If I try to start normally the windows Vista loading bar appears, then disappears and all I'am left with is my mouse moving on a black screen. Can anyone help me with this?

Thankyou,
 

A:Bios Update Error - Urgent

6 more replies
Answer Match 82.32%

Win 10 64bit - I keep getting an error when I try to update the bios. Tried flash.bat and also running afuwinx64.exe P11-A3.CAP from an admin command prompt. Tried from a different folder as well. Same result.

More replies
Answer Match 82.32%

I have Paint SHop Pro and I installed it on my Vista OS desktop.
I have een using PSP6 since forever and although I have PSP 6 - 20 I prefer using ver 6.
Problem is I get an error when I start PSP6.
It says "failed to update system registry. try using REEDIT.
I am scared to death of messing w/REGEDIT.
If I click "OK" the program starts and works fine, it is just annnoying.
Any ideas short of having to use a newer PSP?



Thanks in advance!

Rhonda

A:[SOLVED] psp6 failed to update system registry (error)

Quote:





Originally Posted by lolaisbk


I have Paint SHop Pro and I installed it on my Vista OS desktop.
I have een using PSP6 since forever and although I have PSP 6 - 20 I prefer using ver 6.
Problem is I get an error when I start PSP6.
It says "failed to update system registry. try using REEDIT.
I am scared to death of messing w/REGEDIT.
If I click "OK" the program starts and works fine, it is just annnoying.
Any ideas short of having to use a newer PSP?

Thanks in advance!

Rhonda





Hi. . .

Upgrade to Paint Shop Pro vX2 (12) as soon as possible! I'm glad to hear that the possible use of REGEDIT scares you. Good move not to edit the registry keys to retrofit a product that really should not run on a system newer than Windows 98 (platform NT 4.0). Editing those registry keys under Vista could have been disasterous as many have changed under Vista as compared with Windows 98. For info, the "NT" referred to by Jasc Software, Inc., the makers of Paint Shop Pro, is the platform used by all versions of Windows since the introduction of Windows 3.1 in 1993. The basic versions of NT are:

NT 4.0 - Windows 98
NT 5.0 - Windows 2000
NT 5.1 - Windows XP 32-bit (x86) architecture
NT 5.2 - Windows XP 64-bit (x64) architecture
NT 6.0 - Windows Vista


The version of Paint Shop Pro that you are trying to run - v6 (NT 4.0) - is simply not compatable whith Vista (NT 6.0). Here is... Read more

7 more replies
Answer Match 82.32%

My computer have two (2) updates today. One is an update for Virus definition of Windows Defender I think. Then the other one is an optional update for Aliyun, Inc. - Other hardware - Y. I try downloading and installing updates, but the "Aliyun" one failed. I tried reinstalling and redownloading updates. But it cannot install. These is always a problem (specifically error code 800F020B). What is this update? what should I do?

A:Failed to update Aliyun, Inc. - Other hardware - Y Error code 800F020B

This MS website may help you with the error 800F020B.

ERROR CODE 800F020B - Microsoft Community

This Wikipedia website tells you what Aliyun is.

Yun OS - Wikipedia, the free encyclopedia

2 more replies
Answer Match 82.32%

Basically when I tried to do a windows update, it downloaded about 5 other updates and installed them, but 2 updates did not download. Instead of "Downloading [updatename]... complete!" it says it failed. I tried to download/install them again after a system restart (had to restart for the updates that DID install) but no luck. I tried disabling my firewall and antivirus and tried again, didn't do anything. The error code is 0x80070005, and it just says to install the update again (which I can't do...). Specifically, the updates are "Update for Windows XP (KB951072)" and "Security Update for Windows XP (KB950974)"

Is anyone else having this problem or have any idea what to do?

A:[SOLVED] Windows Update downloads failed (error 0x80070005)

how did you solve this?

1 more replies
Answer Match 82.32%

3 computers, desktop running Ultimate and backing up to AC-powered external drive and 2 laptops running Professional and back up to USB-powered external drives.. Backups set for full data and included system image for all 3..

No problem with desktop (which backs up daily), but unable to successfully back up either laptop since Windows Update installed SP-1. Fails as below:

Error: 0x80070005 - Access denied

Both laptops were set to run backups once a week (since the external drives are not plugged in at all times).. and, never had a problem with the backups failing before..

No changes were made before or after SP-1, checked permissions, all set to Full Control, log in as Administrator with UAC off (only one using the computers).. Ran chkdsk on both laptops and both external drives and no problems found.. Ran sfc /scannow and also clean for both..

Tried disabling all non-Microsoft services except for anti-virus and bluetooth (mouse is bluetooth) on one laptop and backup still failed with the same error.. Seems to get to approx 97% - 99% before it fails..

Have found older posts referecing making sure the D: drive is not set for backup or system restore.. Have never used it, backups have always been to the external drives (L: on one laptop and H: on the other).

Other than a problem with the fingerprint reader on 1 laptop after the SP-1 update (had to go back and install the original HP driver), SP-1 seems to be fine and do not really want to un-install.. Not sure if I even... Read more

A:Error: 0x80070005 - Access denied , Backup Failed after SP-1 update

8 more replies
Answer Match 82.32%

I am trying to install .net framework and keep getting error HRESULT 0xc8000222. As a result I attempted to use windows update and realized it is failing. It says the service is not running. I tried installing Windows6.1-KB947821-v25-x64 and it also fails with error code 0xc8000222.

I tried to start services (using elevated command prompt) and here are the results:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>net start bits
The requested service has already been started.

More help is available by typing NET HELPMSG 2182.


C:\Windows\system32>net start wuauserv
The requested service has already been started.

More help is available by typing NET HELPMSG 2182.


C:\Windows\system32>NET START BFE
The requested service has already been started.

More help is available by typing NET HELPMSG 2182.


C:\Windows\system32>NET START TRUSTEDINSTALLER
The Windows Modules Installer service is starting.
The Windows Modules Installer service was started successfully.


Any help would be greatly appreciated!

A:Windows Update failed with error 0xc8000222, Service not running

Please run a full CHKDSK and SFC scan....

Click on Start > All Programs > Accessories
Right-click on the Command Prompt entry
Select Run as Administrator and accept the UAC prompt - the Elevated Command Prompt window should pop up.

At the Command prompt, type

CHKDSK C: /R

and hit the Enter key.
You will be told that the drive is locked,
and the CHKDSK will run at he next boot - hit the Y key, press Enter, and then reboot.

The CHKDSK will take a few hours depending on the size of the drive, so be patient!

After the CHKDSK has run, Windows should boot normally (possibly after a second auto-reboot) -
then run the SFC.

SFC -System File Checker - Instructions
Click on Start > All Programs > Accessories
Right-click on the Command Prompt entry
Select Run as Administrator and accept the UAC prompt - the Elevated Command Prompt window should pop up.

At the Command prompt, type

SFC /SCANNOW

and hit the Enter key

Wait for the scan to finish - make a note of any error messages - and then reboot.
Copy the CBS.log file created (C:\Windows\Logs\CBS\CBS.log) to your desktop (you can't manipulate it directly) and then compress the copy and attach it to your reply

8 more replies
Answer Match 82.32%

Tried running windows update KB2545698 and it failed due to error code 800B0100. Please help!

A:Update for Windows 7 (KB2545698) failed due to error code 800B0100

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

9 more replies
Answer Match 82.32%

I've finally solved the problem preventing me from updating my Dell Inspiron 7537 laptop from Windows 8.1 Home to Windows 10 as described in "Something Happened" What Next?.

The installation was consistently failing at the point where Windows is about to restart for the first time with a grey information window titled "Something has happened" with the information "Windows 10 installation has failed".

I've posted below how to diagnose and repair your PC to enable the Windows 10 installation to proceed. The installation should proceed smoothly once the error is corrected.

Symptoms
You are booting in UEFI mode i.e. you have a separate EFI System Partition (ESP) on your system disk.You are updating from Windows 8.1 to Windows 10 using the USB install disk, a mounted ISO update image or Windows Update.The installation consistently fails at the point where Windows is about to restart for the first time with a grey information window titled "Something has happened" with the information "Windows 10 installation has failed".The setuperr.log installation error logging file contains error 0x80004005 towards the end of the file and there is an error message referring to "Failed to backup BCD database".The command bcdedit /export <yourfilename> fails with the error "The store export operation has failed. The handle is invalid".

Diagnosis
The ESP partition has become corrupted causing the failure to export the... Read more

More replies
Answer Match 82.32%

Hi Guys,

Was unable to update this 2 .Net updates. Have been trying to search online for solution including microsoft solution but failed too.

Can someone please guide?

Thanks!

A:Update Failed: KB2729452, KB2742599; Error Found: 80070002

First try downloading then ofr local installation - get the appropriate ones from these links.
Download: - Microsoft Download Center - Download Details
Download from Official Microsoft Download Center
Use a Clean Boot procedure, and see if they install that way
How to perform a clean boot to troubleshoot a problem in Windows Vista, Windows 7, or Windows 8

- if not we need the exacts error messages, and the CBS and CheckSUR logs
Windows Update Posting Instructions

9 more replies
Answer Match 82.32%

I have a HP mini 110-3000 and am trying to install the Windows 7 Service Pack 1 but every time I have tried to update, it comes up with error code 26. I have tried everything that I could think of and need assistance.

A:Windows 7 Service Pack failed to update, error code 26

Hello Krayola47, welcome to SevenForums!

Can you post the requested data please?

Windows Update Posting Instructions

Tom

1 more replies
Answer Match 82.32%

I have been looking around trying to find a fix for this issue, and no matter how hard I try, I cant get it to work. I need IE to update so I can get the upgrade to Windows 10.

Can someone who knows how to fix this error please help me and walk me through fixing it?

A:Internet Explorer 11 update failed error code 9c59

Hi Khaz, welcome to Windows Seven Forums.

Read through this MS website & see if there ia anything there that could help.

https://support.microsoft.com/en-us/kb/2872074

2 more replies
Answer Match 82.32%

I've been dealing with this for some time and have been using another browser in the meantime. I also tried to install IE10 with the same problem. Also tried to uninstall IE9 but could not even do it manually. The IE9 security update failures began with KB2817183 and have continued through KB2829530 released on 5/14/2013. Other Windows updates that come up appear to work OK. I have run the sfc /scannow tool and the system update readiness tool and find a list of 4 unavailable repair files in the CheckSUR file. Ultimately I want to update to IE10 but am guessing that I will need to fix these files before that can happen. I have pasted the CheckSur file here for convenience but also have attached a zip file of all the CBS log files. Any help or suggestions will be greatly appreciated. Thanks!
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 18.0
2013-05-21 13:23

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
(f) CSI Manifest Failed Catalog Check 0x00000000 winsxs\Manifests\amd64_microsoft-windows-ie-runtimeutilities_31bf3856ad364e35_9.4.8112.16464_none_bc19a9c95f45aeb7.manifest amd64_microsoft-windows-ie-runtimeutilities_31bf3856ad364e35_9.4.8112.16464_none_bc19a9c95f45aeb7
(f) CSI Manifest Failed Catalog Check 0x00000000 winsxs\Manifests\amd64_e... Read more

A:Failed Cumulative Security Update IE9 Win7 Pro SP1 x64; Error 80073712

Hello jacriverlea and welcome to the forums

Windows Update Package Replacement
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Please download the attached file, Packs.zip and save this to your Desktop.
Right-click on the file and select Extract All...
Tick the box labelled Show extracted files when complete then click Extract
A window will open showing two folders, Manifests and Packages
Open the Manifests folder and copy the files into the following folder (if there are any files)
C:\Windows\Temp\CheckSur\Winsxs\Manifests

Open the Packages folder and copy the files into the following folder (if there are any files)
C:\Windows\Temp\CheckSur\Servicing\Packages

Run the System Update Readiness Tool (SURT) again
When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:
C:\Windows\Logs\CBS\CheckSUR.persist.log
Tom

3 more replies
Answer Match 82.32%

Hi everyone,

I have had this issue since September now and cannot seem to fix it,

The Windows update does not seem to be able to get past KB2943357 or KB2937610.
Worst part is that it attempts to install them every time I shut down resulting in a +20 minute shutdown every time.

- For SURT : i have downloaded and installed the KB947821 twice, first time it found errors, second time it didn't.

- SFC scan : Results are in the CBS.log file
- Windows error codes : 80073712

I use Windows 7 SP1 Home Premium x64

I hope you all can help me, ive been struggling with it for months now.

A:KB2943357 and KB2937610 error code 80073712 failed update

You have some MAJOR corruption.

Code:
Line 349082: 2015-01-05 18:19:25, Info CSI 000008b9 [SR] Repairing 128 (0x0000000000000080) components
Line 349083: 2015-01-05 18:19:25, Info CSI 000008ba [SR] Beginning Verify and Repair transaction
Line 349086: 2015-01-05 18:19:25, Info CSI 000008bc [SR] Cannot repair member file [l:32{16}]"bthprops.cpl.mui" of BTH-USER.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 349089: 2015-01-05 18:19:25, Info CSI 000008be [SR] Cannot repair member file [l:28{14}]"hidbth.inf_loc" of hidbth.inf.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 349092: 2015-01-05 18:19:25, Info CSI 000008c0 [SR] Cannot repair member file [l:12{6}]"ks.inf" of ks.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store... Read more

3 more replies
Answer Match 81.9%

Hello

My last BIOS update has failed and now my laptop Satellite PrU400 PSU45E is out of order.
I want to use the Crisis Recovery Disk with an USB floppy drive but I don't know the key combination to run the boot-block.
Is anybody can help me?

Best regards

A:Satellite Pro U400 BIOS update failed - What is BIOS Boot-block access

Hi

I wondering what Crisis Recovery Disk do you have ?:|
In my experience the special disk is needed which is available only for ASP technician.
Therefore it?s necessary to contact the ASP in your country in order to reflash the BIOS.

In my opinion you shouldn?t not try any ?Crisis Recovery disks? which you fond in the net? this can lead to mobo damage?

5 more replies
Answer Match 81.48%

Hi all,

System: Win 7 Prof 64 bit SP1.

Automatic updates went into loop few days ago,when the installation of optional update KB2506143 failed. Log files had several entries with 0x80070bc9 error. Inspite of hiding the update the problem persisted.

Tried lot of microsoft fix it's, few other stuffs and the current state of the computer is,

a. After I login into the system. Windows update says, "Check for updates for your computer" with RED Check Mark. Always install updates to enhance your computer's security ....
b. When I invoke "Check for updates" button. After sometime, it shows, "Restart your computer to install important updates. Windows can't update important files and services while system is using them. save any open ......
c. If I invoke "Restart now' button, it would repeat to step #a. This is in a loop now. (no more updates are visible in the screen including the hidden updates).

ReportingEvents.log file:
===================
... 8024a005 AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024a005.

... 80070bc9 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80070bc9.

80070bc9 is the one which is appearing for the past 2 weeks.

windows update.log file:
====================
2012-12-22 11:43:37:369 1056 d64 Agent * Windows Update access disabled: No
2012-12-22 11:43:37:385 1056 d64 DnldMgr Download manager restoring 0 downlo... Read more

A:Windows Update Client failed to detect with error 0x80070bc9 - Looping

Hello and welcome snvasanth try this Windows update error 0x80070BC9 with windows 7

na d it may be worth while installing the Microsoft Readiness Tool.


The error you are getting seems to be related to an Office program too - have you just installed one recently or updated it?

Anyhow the Readiness Tool is worth getting anyway.

Download System Update Readiness Tool for Windows Server 2008 R2 x64 Edition (KB947821) [November 2012] from Official Microsoft Download Center

9 more replies