my dad's old laptop was recovered after long time, but, it asks for bios password and we cannot able to remember any.. My dad said he wasn't sure it was there in the first place. it shows SYSTEM DISABLED 07437 if we try to guess the password for 3times. can anyone provide right code for the bios..?
@AshwinRuffian? Enter: otrquj or toooa Regards, DP-K
3 more repliesHello sir,I have a problem in bios password. I tried to reset cmos by removing rtc battery. But i can't remove password. System disabled code is 09565.Thanks,MNK
Solved!
View Solution.
When asked for password try nddo or vrckh
4 more repliesI can not use my pc .. I misspelled my bios password and now sends me an error code .. you poede give me an unlock code please. Error Code: 21501 first of all, Thanks
Try entering the following unlock code: ckhi
1 more repliesHello sir, I have a problem in bios password. I tried to reset cmos by removing rtc battery. But i can't remove password. System disabled code is 03218. Thanks,Moewin
Hi, Please try (lower cases) ebceyfd or mpf Regards.
9 more repliesHi vikassingh, If you post the code that it gives you here, then I will try to help you. -erico
9 more repliesHello sir, I have a problem in bios password. I tried to reset cmos by removing rtc battery. But i can't remove password. System disabled code is 07437. Thanks, MNKTags:Microsoft Windows 7 (32-bit)Presario V3000
The other day I left my laptop on overnight and died cuz I didnt have the power cord plugged in and it wouldn't come back from standby in the morning even after I gave it power. After plugging it in, I powered it off by holding the on button for about 5 secs. When I turned it back on, I'd get 2 short beeps, LED lights on, and fan spinning, but nothing on the display. I've tried plugging it into an external monitor but nothing showed up. After testing for awhile, I noticed that when I plug my power cord into the laptop from a completly shut off state, the computer automatically starts up and gives me the same symptoms again. That's kinda strange that plugging the laptop to power = turn on instantly. Anyone know what's goign on here?
My hitachi starts up when I plug it in.
I always assumed it was because it doesn't have a battery.
Never did.
You might want to run a full charge cycle on the battery and see if
it is still holding a charge.
then try it.
Please help, my laptop, (compaq presario v3000), won't load xp, if i tap f8, sometimes it will go to the screen where you can pick safe mode but it won't let me go to safe mode. sometimes it will go to desktop but when i try to play a game it restarts & frezes up again. I also have tried system restore, it takes me as far as choose your restore point & then it does nothing, just frezes there. I also have a d drive so i can restore it to manufactuary, when I first purchased my laptop. i don't know how to do this either. I'd rather not loose everything if possible. Please help me, I'm desperate.
Well, you say when your try to game it does not like that.
What about if you copy off files?
If you can do that, my advice is back up as soon as possible.
Is the hard drive making any noise?
Hey Everyone...
Any one here can help me find or URL for Driver software for Compaq Presario V3000 for Windows 7? i already check on official website of Compaq and also hp site..but still cant find the driver for my laptop. i also already google it but still also didn't find it... can any one help me on this problem to finding a driver for my Laptop..
TQ
Quote: Originally Posted by ART88
Hey Everyone...
Any one here can help me find or URL for Driver software for Compaq Presario V3000 for Windows 7? i already check on official website of Compaq and also hp site..but still cant find the driver for my laptop. i also already google it but still also didn't find it... can any one help me on this problem to finding a driver for my Laptop..
TQ
All drivers appear to be installed?
Hey dudes, i was wondering if you could help me figure out what's going on here, though i might already have a guess, i'd like to get opinions as well as solving matters.
I'm helping my friend solve a problem with her laptop where her Compaq Presario v3119AU suddenly just stopped detecting the wireless card, even in device manager.
Now, we've tried reformatting, running it in linux or win vista and I've even gone so far as to take out her wireless card to test it in my laptop, and to test mine on hers only to get the same results, that the card isn't detected in her compaq, whereas her Broadcom Wireless works on my ASUS laptop...
I'm suspecting that over time of her using the laptop on the bed or so that the board has somewhat cook off... probably... any input on this? so far the only option i see now is to head it back to compaq...
hamsteyr, i'm sorry, this is first symptoms of northbridge dying(nv6150go). the problem is that nv6150go makes some disturbances in pci-ex bus,and thus preventing the wireless card from detection. well, you an try to update your bios, it may help. i had 10 or 20 cases like this in my repairing practice. 5 laptops were cured(completely?) with BIOS reflashing. the others - nv6150go/nf-spp100 replacing.
I have a laptop from compaq that has windows 7 on it. There is not a compatible driver for audio that i can find. IF anyone can lead me to a driver to install for sound let me know.
Thanks,
The Zilliak.
Was this laptop upgraded from XP to Windows 7?
HI everyone! i need some help! i got COMPAQ PRESARIO V5206OM, and i forgot the bios password, when i give 3 times the bad password the laptop show me the next error: SISTEMA DESACTIVADO [01130], if somebody can help me i will be happy! thanks to much!
I just restored this computer with the factory reset and I need help with the bios password the system disabled key is 59196419. Any help would be great.Thanks so much.Spoiler (Highlight to read)
Please try-46894439 Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee
2 more repliesCan I know the BIOS Password for the laptop HP Compaq Presario C506TUIts shows the message as "System Disabled [13674]"
@Ponkanagaraj? Enter zulquvm or cxgqu Regards, DP-K
1 more repliesI just restored this computer with the factory reset and I need help with the bios password the system diabled key is 59036668. Any help would be great.
Solved!
View Solution.
Forgt the bios password to my presario CQ56 LAPTOP the errcode is 59091082 please help
After rebooting my system I now come to a screen to enter system password. Only thing is.. I never set this and there is no way around it.I have tried the take battery out reset CMOS trick that used to work in desktops to no avail. this is the message I get after too many password attempts. system disable key 92931076
Solved!
View Solution.
Chick try. 23699078 Use that code to go into the BIOS.Disable all passwords that are enabled.If asked for the CURRENT password use that code.If asked for NEW password just hit enter.If asked to VERIFY password just hit enter.Save and exit. REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
8 more repliesI have an older compaq presario CQ62 that i'm trying to get running for my father. It will not load stating "Windows failed to start. a recent hardware or software change might be the cause" Status: 0xc000000f Info: the boot selection failed because a required device is inaccessible. I have windows 7 on a bootable USB drive but it gives me the same error when trying to boot from the usb drive. when i try to enter bios to rearrange the boot order it's asking for a password and i have no idea what it is. It's giving me a code # 54391904 any way i can reset password or still boot from USB drive? thank you in advance
Says system disabled after 3 attempts at administrator password. Code is 63494577 please help!
More repliesHi,I need my bios administrator password for a compaq presario cq57.I get system disabled error 61596522.Thanks.
Hello @kodoku Welcome to the HP Support forum. Please, try to enter this >> 74494504as a response code. This should let you enter BIOS, start your PC, unlock your BIOS and/or reset security settings. Let me know if this works for you
1 more repliesHello, I am attempting to access the BIOS on my HP Compaq Presario CQ62. It prompts me for a master BIOS password (which I do not know), and reports an error "System Disable. Key: 87231156"Other threads indicate that this is a common issue. May I please have my master BIOS password? And is there any other way to recover this? Thank you so much!Brandon
@Brandon_S1? Please enter 38199198 Regards.
1 more repliesNeed a bios password for a Compaq Presario CQ62-209WM System Disabled KEY: 5503579 Please Help.
@curtism49? Check the code you've posted - it should contain 8 digits. Regards, DP-K
1 more repliesSir,My compaq presario cq 60 i have forgot the bios password (Enter Administrator password ?). after 3 attempts i got a code 63186857 Please help me .
Solved!
View Solution.
Hi, cant enter bios setup, got error code: 56085878. Help please. Thanks
Enter the followng unlock code; 49983278
2 more repliesI have a Compaq Presario CQ57-339WM and it won't boot.I tried to restore it, but I can't get into the bios to let it boot from CD.It says system disabled 67912930 after 3 failed attempts. Help!
Solved!
View Solution.
I've a friend's laptop here that is in dire straights.
It is a Compaq Presario V3000 running Windows XP Home edition. Beyond that I don't really have any information to post because I can't even get the thing to boot in Safe Mode.
A regular boot will anchor this thing in a Windows start up loop. It loads Windows then the blue sceen flashes with an error message and is too quick for me to read what it says .. then it starts back to loading Windows .. insert vicious circle here.
A safe mode boot will get me to the "Windows is starting up" screen, but no further. It sticks there.
Anyone have a suggestion?
I went in and disabled the "auto restart" function and have nailed down the BSOD error message.
STOP: c000021a {Fatal System Error}
The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000).
The system has been shut down.
Maybe this will help pinpoint the problem?
I have a compaq presario. The bios are poop. Does anyone know if there is a way to update the bios with areal manufacturer? Or am I stuck with compaq's bios? It would be really nice if there was a way to find out who makes the bios for them and update it. Any info would be great. Thank you in advance!
You need to get the BIOS from Compaq. While the board maybe MADE by another company, who knows what slight changes to the specs were made.
When you do your next upgrade, build your own and get a real BIOS.
Like working on a NEW Dell PC, almost NO Options, no Temp monitors nothing.. junk... its a DELL!
How do I find the password for a Compaq presario PC SR5710Y, that was given to me by someone who does not remember his password.
More repliesHey guys, I have a Pentium 2 Compaq Presario 233MHz system. I was wondering if ANYONE know's hot to get into this systems BIOS. I have been trying and trying but when I hit F10 at the beginning I just get into the COMPAQ diagnostics and setup, and it says nothing about BIOS. My plans are to overclock it to see how it works, just for hands on experience, if you have any tips on that you could help me out with that also. Thanks for your guys help and I hope someone can help me. email me at [email protected] OR send me an AOL instant message at Daws202 which is my screen name. Thanks people!
-Adam-
Just went threw the same missery
There is a pass word to the BIOS and you need to take out the motherboard battery to erase it. Leave it out for 5 secs, unplug the computer and turn it on unpluged to drain all the power out of it. then reinstall the battery and reboot.
You m,ay have to remove some of the perifs CD burner, JS Ect if it dosent work the first time to drain the power out of everything
Yes it sucks.
hi folks, need help fast,
hi hope you can help i have a presario compaq which when i brought i went into some set up and where as when it loads it asks for a password before it loads.. i now want this off as its just annoying!!! i have the password luckily but whenever i go into it before it loads by pressing esc and try and disable it, and save config its still asks for it when i reboot any help or advice im really willing to pay i even have tried to defualt it and save but still asks any help would be amazing
Does anyone know how to get into the bios on a Compaq presario with a model number of 5340 ?? I have tried pressing delete key.. no affect, tried pressing
F1, F2, and escape, (one at a time) but the bios don't want to open up..
It shows nothing on the screen but the COMPAQ logo when started up. Then goes imediately to the windows 98 logo, then opens up windows 98.. It works ok, but I need to get into the bios to check some settings.
Thank You..
have a compaq presario r3000 with poweron password set by previous owner, system disable code is 02620 can you help me get past this.................
Hi, Enter ddpjd or czyd Regards, DP-K
1 more repliesMy boss gave me a laptop Compaq Presario C759LA for factory restoring a few days ago, I was working on Windows and making backups, then I reboot it and it ask me a power on password. I could reboot and enter to BIOS Setup, but I couldn't reset that password if I don't know it. When I enter blank password three times I get one unlock password: The key is 93095941. Is this a bug? Are there a patch fix? Please help!!!!
When prompted for password try 22993387 That should clear all passwords.
1 more repliesMy sister is having a problem with her Presario v3000 laptop, she says it turns on and sounds as if everything is running as usual but the screen shows no image. It's running windows xp home, amd [email protected], 1gb ram, and an 80g hard drive. Any info apreciated thank you.
presario v 3000
It may be time to take the laptop in for service. Can you see video using an external monitor?
I have a Compaq Presario V3000 (approximately 4 years old) running Windows XP SP3. When I plug in the headphones, I assume the laptop speakers should be muted. This does not happen.
I have conducted some research and discovered that this Presario model was apparently designed to specifically run Windows Vista and running XP interferes with the muting facility.
Would anyone know how this problem may be solved (without resorting to buying Vista)?
Thank you.
Windows Vista and running XP interferes with the muting facility.The laptop can be run with either OS. Did you checked the Control Panel - System and Sound - Speaker/Audio output?
3 more repliesHello,
first of all, i dont know computer that much.
My problem is, i've downloaded a malicious malware, maybe a virus and my lappy kept on rebooting when the blue screen appears! What i did is i reformat it with the cd that comes with the package (windows vista starter) and the oem pre installation kit. My another problem is there is no cd drivers on the package. So some drivers dont work well. In device manager, there is no network adapters installed and whenever i try to install drivers like intel pro 2200bg wireless, it doesnt install properly! Until now, the only thing i cant use wth my lappy is the internet. How can i make it work again?? Im so sad with this! Help please. :-(
Thanks,
Anjhyne
The problem with the laptop start when the wireless adaptor stops working, then a few days later the computer freezes in a strange looking screen where all the colours are muddled up, then when I am unlucky the laptop will not start again anymore it will just display a blank black screen. I have sent it to repair twice and each time they resoldier the different parts of the motherboard the first time was the "northbridge chipset", the problem is that now it has happened again and I am going to have to send it to repair a third time, each time it works for a while before it stuffs up again. Should I keep sending it to repair or is it just hopeless, or does anyone know what the problem is and why it works for a while before it stuffs up again?
Hello! I'm new here to these forums hoping to find a solution to this problem that has been bugging me for days and keeping me from setting up my computer.
Basically after several years, I am finally dealing with the loss of my Hard-Disk drive that came with my computer. I have bought a new Samsung Spinpoint F3 HD502HJ as a replacement, and I am having trouble setting it up. Here are a few Specs for my computer:
Compaq Presario SR1303WM
AMD Sempron 3000+
BIOS Revision 3.11
Mother Board: ASUS A7V8X-LA
It's a bit of an older computer. The HDD that failed me used the old ATA standard, and I am going from that to SATA II (3 Gb/s). My motherboard does have two SATA ports on it, but I don't think the motherboard supports 3 Gb/s transfer rate. Only 1.5 Gb/s. I have an SATA cable that connects directly from the HDD to the MoBo as well as a power converter that I use to connect power to the new HDD. I am using a jumper on the fifth and sixth pins ::[:]: <--- looks like that. The reason I am using a jumper is because I have read by other people that this puts the device into the 1.5 Gb/s mode, although I'm not entirely sure. The Samsung manual my HDD came with says that in order to put the drive into this mode, you must download and use their software from their site, www.samsung.com/hdd which I have tried and failed. When I run Samsung's software, I get the error: "Error reading from drive L: data area: drive not ready (A)bort, (R)etry, (F)ail?"... Read more
I erased the bios on a Compaq Presario 5340. Now I need to find a bios for it again. Compaq's site is no help at all.
Does anyone know where I could find one?
(my problem is that it will not boot to the HD. it will only go to the floppy disk with a program called KillDisk on it. i connected the HDs to a different computer and it worked fine without the floppy and booted to the OS. and yes the HD is first for boot order.)
Hola buenos dias, Tengo una notebook Compaq Presario 21-N0F3AR la cual al estar encendida y quedarse sin bateria, dio un error de windows (File:\BCD Error codexc0000034).Al querer entrar a la bios para poder cambiar el oredn de bootea para reparar dicho error, me encuentro que me pide un password de administrador, el cual nunca se configuro.Luego de los 3 intentos fallidos me da el codigo ERROR System Locked 0949F6ABHe ledio en varios foros y a mucha gente le ha pasado lo mismo. he tratado con todos los programas que hay en la web para tratar de sacar el codigo invertido pero todos sin exito.Por favor me podran dar una solucion?Muchisimas graciasDiego
More repliesFirst I want to say hello,as I just registered here on this forum.
I hope I haven't violated any of the rules.
The reason I'm adressing you is because of my (now old) computer (Compaq Presario 14XL242) that i wish to upgrade my computer to windows xp. In order to do that i need to update the BIOS.How do I do that?
Thank you
Greetings, and welcome to TSG!!
Look on the manufacturer's Web site for the BIOS update. There should also be instructions on how to do so.
Try: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00034791&cc=us&lc=en&dlc=en&product=95128
Cant get into my bios on my Compaq Presario 5304. I tryed delete and f8 but it just gives me to option to boot in safe mode. My CD rom drive wont work and i switched it out with another one but still wont work. I am not sure if they are both bad but I imagane that they arnt. Please help.
can someone unlock my bios hidden (advanced) features i need it i'm advanced user i need those tabsand all hidden functions unlockedbut if there's only hidden advanced and power tab and no more hidden settings send me the unlocked bios to flashModel:Hp Compaq CQ58Bios:InsydeH2O Setup Utility Rev 3.7 (after update)Bios Version:F.29tabsMain (shown)Advanced (Hidden)Security (shown)System Configuration (Shown, it have hidden features but the tab is shown)Power (Hidden)Exit (Shown)Please Unlock And send me to flash it!!!!!!!
More repliesI have a Compaq Presario CQ56-115DX that says it needs a Power On Password. I've tried bios reset it, but can't find a battery. It comes up with Key: 51689373? Anyone have any idea's? Any help would be greatly appreciated!!! Thanks so much!!
My friends laptop started bringing up a password that she never set on boot up. if you imput the wrong password 3 times it gives the code62050514. She never set up this password. What do I do to remove this password.
Hi: Please read the first post at the link below for what to do with the system disabled (halt) code you received from the PC. http://h30434.www3.hp.com/t5/Notebook-Operating-Sy??????????????????????????????????????????????????...
1 more repliesCompaq Presario CQ57 needs admin password to bootup. Says system disabled with code 74006138.
@Klanimal? Please enter 61964118 Regards.
1 more repliesMy son is 11and he put an administrative password on the Compaq presario cq57 laptop I bought for him.. He can't remember the password for it now..Go figure Lol. Help me please
Solved!
View Solution.
Bama Enter 30880517
4 more replies@Noseph01? Enter 79933805 Regards, DP-K
1 more repliescompaq presario CQ40 on "enter administrator password or power on password "is detected . How can i reset it .Please help me .
Hi, At the password screen, hit enter 3 times and you should receive a 'halt code' - post back with this code. Regards, DP-K
5 more repliesHi there,
Im very new to this whole upgrade stuff
a mate (who knows computers) upgraded my Compaq Presario V3000 to windows 7, since i got it back its working a treat how ever i cant seem to get my mic working or the audio through my front earphone jack.
I have tried a few drivers, the HP site does not support drivers for this laptop with windows 7.
its the 64 bit version and yes my pc is also 64bit.
I have been through all the settings in device manager and it looks fine.
There are no little yellow triangles, under sounds video and game controls is
a pic of a speaker and hi definition audio device... so to me looks normal.
I have been through all the settings on my pc, but normally if i click on the speaker on my task bar it opens the volume control with a speaker level, mic level, headphones level etc, now its just levels for the laptop inbuilt speakers and something called sound systems ( no matter what i try and can not get anything out of setting the sound systems tab as the default so no idea what that is)
If any one has any ideas on how to get my headphone jack to waken and produce noise or my mic to open and do its job please let me know.
p.s my mate that installed this software has moved away as of the day after install and is unavailable for further assistance at this time.
Thanks in advance.
hi justwannadrift, welcome to the forums , here is a link to the drivers Compaq Presario V3000 Notebook PC series*-* Download drivers and software - HP Business Support Center they are for Vista 64bit ,install them in compatibility mode Compatibility Mode
1 more replieshow to run the system bios in laptop Compaq Presario CQ57 with Windows 10?
ANAKONDA wrote:how to run the system bios in laptop Compaq Presario CQ57 with Windows 10?Hi, Sorry, what are you trying to do ? We don't run the system BIOS. And from your question, all I can say: Please don't touch to BIOS, this is the shortest way to brick your machine. Regards.
1 more repliesI have a Compaq Presario 2200 model laptop.
I have an issue where every time by laptop batter discharges the time clock resets. I believe that this is realated to the bios battery. I have taken the laptop appart properly via guide provided on compaq website. This is the maintenance guide with all the spare part numbers listed. However, this laptop is out of warranty.
My problem is that I cannot locate the bios battery anywhere on the board. Could someone with some experience pleae review the diagram for this model and tell me where the battery is?
Thanks,
Darmin
First of all.
Have you tried to calibrate the battery by BIOS? < This might help a lot of problems.
Second
Have you updated your BIOS ?
When I start the computer up it goes to bios screen. It will not let me continue by pressing f2. F1 takes me to help screen, but when I exit that it is right back to bios screen and f2 does nothing.
Mcdolemom, welcome to the forum. Based on the age of the computer, I suspect a failed power supply unit (PSU). Here is a guide to help you troubleshoot it. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.
1 more repliesWell, last week was going good until my computer decided to melt down. I reworked a Compaq Presario 4712 as a backup, but I can't figure out the bios setup sequence. Can someone please help me. I'm in the middle of backing my web site up, so I can move it to a secure server.
PowerOn Password System Disabled[84997967] Compaq Presario CQ43 Please help. Thanks :-)
Solved!
View Solution.
Hi, Try entering: 31695369 Regards, DP-K
6 more repliesI went to change the boot sequence to boot from my integrated DVD so I could reload my OS. After making the change I attempted to save the BIOS settings but the system locked up during the process. Now no boot, no screen, no effect when trying to get back into the BIOS. How do I (can I) clear the BIOS?
I just reformatted a friends Compaq Presario 3000 laptop with win xp pro. Everything was working fine on it until I updated the bios. Now the computer starts to come on and then shuts down after about a second. I have tried draining all the power but get the same result. All ideas welcome. Thank you.
Hi all,I have a Compaq Presario CQ61-310SV notebook that does not want to start ? the screen does not turn on and always remains blank. At startup, when I press power button:Lit only leds for Power, WiFi (orange color) and Touchpad;The fan turns on, but the screen remains blank;Caps Lock and Num Lock keys blink 2 times in a sequence;According to these data, I found that there was an error, indicating to failure of the BIOS. But, despite the fact that on the forum I found many of similar cases, no advice did not help me solve this error. So I decided to ask you for help, describing in detail what I tried hoping that you will point to my mistakes and help me to solve the problem.So:First of all, I tried to perform a hard reset by:Disconnecting the AC adapter, battery and all external peripheral devices;Pressing and holding down the power button for about 1 minute;Plugging the AC adapter back into the notebook;Trying to turn on the notebook;Also I removed the CMOS battery for a few minutes ? no result.Next, I tried to recovering the BIOS using key press combination «Win+B» hoping that my notebook has the emergency BIOS recovery feature enabled. But the notebook silently restarts automatically after few seconds after I released the power button. How I tried to do it?I turned off notebook and I unplugged AC adapter;I disconnected the battery and all external peripheral devices;I plugged AC adapter back into the notebook;Holding «Win+B» I pressed power button and I rel... Read more
I noticed that no one can/wants to try to help and I do not know why... If I did something wrong or you need more information about my problem ? please tell me about this and I certainly will update the post.
9 more repliesOk. Trying to fix a friend's computer, and seem to have run into a rather strange snag. Problem: The computer will not boot past the bios screen. Details: When you power on the computer, the compaq logo with intel inside shows up and has the <F1 Setup> and <F10 System Recovery> options listed as well. And this is about as far as the computer gets. After this the whole computer is just locked up, no buttons work on the keyboard no lights come on the keyboard ect ect. I've tried mashing on the F1 key as soon as I power on the computer and I can manage to get it to say *entering setup* but it still freezes after this point. I've already tried eliminating possible sources of problem, all expansion cards removed, HDD and Dvd Rom disconnected, single memory module (256mb ddr 2700), only power, vga, and keyboard connected. Ive also used the jumper on the motherboard to clear the cmos hoping that would solve the problem, to no avail. I've tried using a different stick of memory and different memory slot as well... Tried using both a ps2 and a usb keyboard... Ive even tried pulling out the jumper for the bios password protection (even though it didn't have a password on it, just trying anything I can think of). The installed bios version is 3.1, and that is about all I know about the computer at this point, other than what the website tells me of it. http://h10025.www1.hp.com/... Read more
Try clearing the CMOS again but this time remove the CMOS battery and hold the power button in for a few seconds. Then replace the battery and try booting up again. On the back of the pc is the PSU condition led green or flashing?
10 more replieshey i recently got a compaq presario v6000 from a friend and when i turned it on for the first time i noticed that it made 3 short beeping sounds which i found out that it doesnt have a bios image but anyway the power light a battery light flashes and then reboots but i cant see anything on the screen at all when its powered on. also the fans power on for at least 2 seconds then they turn off. i dont have a hard drive but i need to at least get to the bios so i can reinstall the os using usb drive.
any help would be great and aslo people have been telling me that my motherboard could be warped how would i fix this without buying a new one because i have no money at all for the laptop.
It looks like you may have Bad Ram: Compaq BIOS Beep Codes - BIOS Central.
Computer Does Not Start and Emits an LED or Beep Code Compaq Presario SR5510F Desktop PC - HP Customer Care (United States - English) Or it could be the Video adapter on the motherboard. Try removing one stick of RAM and get to the Bios. You can also download the ISO image for Memtest in my signature burn the image to CD with IMGBurn also in my signature or USB and boot off of the disc and run the tests on each stick of RAM separately.
I was working on a customer's laptop, a Compaq CQ60, that refused to boot into windows and System Recovery disabled all recovery options except for Command Prompt.
On a hunch, after pressing Escape during BIOS boot, I selected HDD Test. The test ran and failed with "Replace Hard Drive." OK.. the laptop sat there for a few minutes and never did anything else, so I tried to get out of that screen. Nothing responded, so I just held the Power button to turn the computer off.
When I pressed Power again to turn the computer back on, the Power and Wireless LEDs comes on, the CD drive is accessed and then the HDD LED lights up for a second and goes out. The screen never comes up nor do the backlights.
I have tried hooking up an external monitor, but that never shows anything either.
I have tried taking the memory out, cleaning the contacts, putting them back in, swapping the modules around, booting with one or the other.... No effect.
I pulled the battery and the CMOS battery, unplugged AC and let it sit for a good half hour. I held the Power button for thirty seconds. Plugged the CMOS battery back in then the AC. Turned it on and still no go.
I cannot figure out WHAT could have happened!? Any other ideas? Thanks...
NOTE: THIS IS A COPY OF MY POST ON THE COMPAQ FORUM...getting desperate.
Hi, i bought a 6150b from a company auction. Everything worked perfect for the longest time. Then last week i went to go turn it on, and all it does is run the CPU fan for a couple seconds, flash the AC LED about 7 - 8 times, and while thats flashing the power and hard drive LED’s stay solidly lit. Then it completely turns off. This all lasts about 3 seconds at the most. That’s what happens when on battery power.
When on AC power, the same thing happens, except it continues doing the cycle over and over again until I unplug it.
I think it might have something to do with the LCD monitor, since it does not even show a slight flicker at all. No color change like it would from when turned off to a black back lit screen when turning on….simply nothing.
I opened her up (no warranty anyways) and checked all the connections for the keyboard, monitor, DVD drive etc....also reseated them as well, with no luck.
Pulled the both RAM modules and reseated them as well, nothing.
Pulled the battery as well, no change. Still cycles the same over and over again while on AC
There are no audible errors codes (real nice HP...), and im lost at this point.
Any and all suggestions are greatly appreciated.
I think instead of just pulling and replacing the CMOS battery you might purchase a new one and install it. Proceed from there. If you get a screen and it's still has a problem try a new PSU. Jazz
Hello all great website!
Compaq Presario 7000 series (model #7QSM11) using Windows ME, AMD 1332 mhz processor. My sister's computer. Hard drive was a 60GB, but it died. So I bought a new hard drive actually tried a 160GB first but thought the 137GB issue was the problem so now I am trying a 120GB western digital Caviar.
I found and successfully flashed the latest bios. (ROM date 3/28/02-786K2 Family). I checked the bios and it does see all 120GB. But when I goto partition it, I run into problems. Three methods tried: I tried to use Western Digitals included CD-ROM, even created the DOS boot floppy that they recommended on another system. Doesn't work keeps coming up with an error that something like A:\Auto???.exe not found. I checked the floppy that file is there?? Comes up whether I am booting from the floppy or from the CD-ROM.
So I tried fdisk from a Windows ME boot disk. Fdisk will only find/or report 24GB. I cleared the partition and tried using the Compaq restore disks but they came up with the same problem.
Am I right in thinking that this is a Windows ME issue?
Can you tell me how to fix this problem?
My computer is a Dell 8100, also running Windows ME but with a Intel P4, I installed a 200GB hard drive and had to flash the bios, and then I am not sure if it was Maxtor's DDO dynamic disk overlay or Intel's application accelerator, or the Flashed Bios, but Windows ME sees the whole hard drive.
I am so frustrated, I am not completely stupi... Read more
My compaq mini is asking for bios password:Password Check Failedfatal Error ... Sysytem HaltedCNU9417XGY pls help
@Lya_And Enter e9lov3x4hi ( Note that in both cases, the 3rd character is a lower case L ) or e9lov3xrhi Regards, DP-K
1 more repliesI recently bought a Compaq Presario V3000 notebook, with Vista installed. It does not have the Windows Vista installer, instead it has a copy of all the files in C drive and some other files. I would not have purchased a notebook with Windows installed, if I knew that I would not get the installation CD along with the package! I would have bought it separately...
This is not a safe way to store the installer files! If my notebook were to be affected by any virus, then all these recovery files would also get infected.
I tried using the Recovery Manager to make a copy of the files in the recovery partition, but 2 among the DVD is corrupted. What can be done to again make another set of DVD with the recovery partition files? It does not allow me to make another set again!
I also noticed that the installation that came with the notebook had some worthless software pre-installed with the computer. How do I remove these programs and files without affecting the functions? I do not want the HP customized Help section, but want the actual Windows Vista Help files. I do not want the other HP programs either.
Is it possible to view all the files on the D drive, such that I can remove the unwanted files before the next installation. When I set the "Folder Options" to display system files then I get a list of files and folders. It now shows me a message that it is a recovery partition and should not be modified. Do any of the files such as "BLOCK.RIN" and &... Read more
use crap cleaner to remove bloatware and to repair registry among other things. Very good program.
use BART-PE builder to make a crash recovery CD
I need the bios admin password for my Compaq presario cq57My system disable code is 59545125Please help
More repliesI need the password for my laptop. The code it gives me is 62688723. It says "System Disabled".
Solved!
View Solution.
Hi. I want to open the bios setup but it asks me for the administrator password. After 3 wrong tries error code appears [62429887]. I have tried passwords :70641938 75721087 75974169NOTE : i can only enter 6 digits in the password field.Please HELP ME !Thanks in Advance.
More repliesI have Compaq presario cq56-115dx and got lockout password 53346355 can u help me
Solved!
View Solution.
@wickedkidd? Enter 42024991 Regards, DP-K
2 more repliesLocked out with system disabled 64766795 with system bios password please help me get passed this thank you Graigster
Hi, Please enter: 71644311 Regards.
1 more repliesI am working on a Presario CQ56 which suddenly started asking for a bios pasword (Enter Administrator Password). If I hit enter 3 times, it give me the code of 63920362. I know this is a motherboard fault causing this, can some one please give me the code to get into this so I can reset the password in bios? Appreciate any one's help in advance.
@kadaff? Enter 72688964 Regards, DP-K
1 more repliesI am working on a Presario CQ56-219wm which suddenly started asking for a bios pasword (Enter Administrator Password). If I hit enter 3 times, it give me the code of 56531731. I know this is a motherboard fault causing this, can some one please give me the code to get into this so I can reset the password in bios? Appreciate any one's help in advance.
Solved!
View Solution.
Hi, Enter: 49499317 https://bios-pw.org/
5 more repliesI am working on a Presario CQ56-219wm which suddenly started asking for a bios pasword (Enter Administrator Password). If I hit enter 3 times, it give me the code of 82026917. I know this is a motherboard fault causing this, can some one please give me the code to get into this so I can reset the password in bios? Appreciate any one's help in advance.
Solved!
View Solution.
I have a hp compaq mini 110
it is asking for Current Password which i don't have
the Halted code is [personal information removed]
Hi: See if entering this unlock passcode works for you... e9lofg1546 or... e9lofg15r6
1 more repliesMy notebook is locked because of a password on the bios. I just forgot my password, and I'm desperate.When I turn on the notebook, the following message appears: P0: HGST HTD5450 - Enter User Password.I try the 3 times, and appears: HDD is LOCKED!The notebook then restarts, and now the message that appears is: ENTER PASSWORD.I put the wrong password three times, and after the third time, is caught in the message: INVALID PASSWORD. Nothing more. I can not use all, or type. Only restarting.* Have I removed the lithium battery, and left for three days without .. no result* I have also removed the notebook battery (left without both) and also uneventfully.Please help me
More repliesNeed a bios password for a Compaq CQ62 System Disabled KEY: 5503579 Compaq Presario CQ62-209WM
@curtism49 Check the code you've posted - it should contain 8 digits. Regards, DP-K
1 more replieshi guyes,,i need the bios administrator password for a compaq presario CQ57 after three attempts i get system disabled 71945581 error....please help me
More repliesPlease Help, I have a presario cq62 and access to my bios is disabled my code is 56773307
Solved!
View Solution.
hi, i have this notebook for repair, and i cant enter the bios settings because i dont have the password and the owner (my uncle) doesnt have any (i guess its the factory password) i've tried factory reset and removing the battery but without success. the bios system give me this code: 663D277B en castellano: hola, tengo una notebook compaq modelo 21N1F3AR la cual no puedo ingresar a la bios, esta notebook pertenece a mi tio y este nunca le cambio ni puso password a la bios en ningun momento por lo que supongo que es la password de fabrica o debido a alguna configuracion de windows 10, necesito cambiar la prioridad de booteo y no logro hacerlo debido a este problema. al ingrresar 3 veces la contraseña de forma erronea me da este codigo el sistema: 663D277B att muchas gracias.
not sure if this will help but try one of these for the password 79060374 or 24537530 if one of them works please let me know and i'll share how I got them and if not I can share how to get it from the company. Good Luck!
5 more repliesenter current paswordpassword check failedfatal error... system halted.CNU9301J3N
@alp757575? Please try (all lower cases) e9lof13wf9 Regards.
2 more repliesProduct Name: hp mini 110.. Please would you be able to find the Bios password for CNU9411GBK it's a Mini 110
@halisilgun? Enter e9lov33hps ( 3rd character is a lower case L ) Regards, DP-K
1 more repliesThis is what's on screen: fatal error.....system halted. CNU0090GG9 can someone help me with this? Thanks.
Solved!
View Solution.
@RYANEDU? Enter e9l11o1hho Use that code to go into the BIOS.Disable all passwords that are enabled.If asked for the CURRENT password use that code.If asked for NEW password just hit enter.If asked to VERIFY password just hit enter.Save and exit. REO
5 more repliesGood day, I totally forget my bios password and it shown Fatal Error ... system Halted. CNU937BXQD thanks in advance
Solved!
View Solution.
@alabri360? Enter e9lofxp45t or e9lofxpr5t Use use the code that works to go into the BIOS.Disable all passwords that are enabled.If asked for the CURRENT password use that code.If asked for NEW password just hit enter.If asked to VERIFY password just hit enter.Save and exit. REO
3 more repliesgud day.. sir can you help me to unlock may notebook laptop BIOS PASSWORD i already remove the CMOS battery but still no luck.. thank you very much.. compaq mini CQ10service tag model#: CQ10-130SEs/n: CNU0023G9Pp/n: VZ616EA#ABV this is my email [email protected]
Hi, Please try all lower cases (3rd char is lower case of L) If CNU0023G9P (zero and zero) = e9l117fhg2If CNU0023G9P (oh and oh) = e9ljj7fho2 Regards.
7 more repliesBought a second hand Compaq 6730B laptop, I want to access the BIOS to make some changes and I have no password, can anyone help with this problem.. Thanks.. Joe L.
Solved!
View Solution.
Lamp. Contact HP and they should be able to send you a customized SMC.bin file which you can use at boot to reset the password. http://welcome.hp.com/country/w1/en/contact_us.html When talking to the HP rep ask them to escalate your service request. Or download these files. https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?dl=0 Insert clean USB flash drive. Then run USB Image tool. Choose the flash drive then click on RESTORE. After restore remove flash drive. Insert flash drive into locked laptop and boot. ?If HDD is installed remove before booting.? At C:\OUTPUT type CD.. ?Then hit enter? Type HPBR ?Then hit enter? First thing is to save your settings. Select #3 re-program. Press ?S? to save system information. Type HPBR and hit enter. Select ?FIRST RUN? Then select model. After reboot repeat same as above but this time SELECT ?SECOND RUN? Some instructions here. ?If you cannot boot from USB there are instructions to make a bootable HDD.? http://mazzifsoftware.blogspot.com/2014/01/hp-bios??-unlock-for-dos.html More here. http://forums.mydigitallife.info/threads/49497-HP-??Probook-Elitebook-BIOS-Password-Reset-Utility REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your ... Read more
2 more repliesI have a hp compaq mini 110
it is asking for Current Password which i don't have
the Halted code is [edited Serial Number by Moderator]
Solved!
View Solution.
Hi, Enter: e9lofqfn9q ( 3rd character is a lower case L ) Regards, DP-K
10 more repliesI forgot bios password.Please can you help me? my serial number CNU94211KJ
Solved!
View Solution.
@TOTZ? Enter e9lov733sw ( 3rd character is a lower case L ) Regards, DP-K
4 more replies