Tech Problem Aggregator

T450s: Monitor wont work on mini display port

Q: T450s: Monitor wont work on mini display port

Hi,

I have a T450s and since I updated to Windows 10 I don't get anything out of the mini-display port. I have tried installing all new drivers and updating the BIOS per Lenovo's support website but I still can't get an external display to work over the mini-display port. Please provide a solution to this problem!

Moderator note: Post moved to T series forum. Model added to subject.

More replies
Answer Match 92.7%

HiI cant get a picture on my monitor using the mini display port, i am using a mini dislay port too hdmi cable, but i dont get anything on the monitor.  My notrebook is a Lenovo L540 with only Intel HD4600 graphic and windows 10.

More replies
Answer Match 82.32%

I have recently taken out my 128 mb SD ram chip and put it back in and now I cant get my moniter to display anuthing and my keyboard and mouse dont work...I do get three beeps but it takes like three minutes for them to sound.
 

A:My monitor wont display/my keyboard and mouse wont work...

Without more details about your motherboard, it sounds like your memory is not seated properly, or you damaged it when you took it out.
 

2 more replies
Answer Match 76.86%

Hello, I am attempting to use the mini display port outpt on the Thinkpad Yoga14 to connect to an HDMI monitor using a miniDP to HDMI adapter. I've tried two different adapters. The monitor is never recognized. However, the mini-display port will work with a miniDP to DVI or miniDP to VGA adapter cable (I verfied this at a store where there were multiple cables and monitors to use). miniDP to HDMI: does not workminiDP to DVI: worksminiDP to VGA: works Has anyone else seen this problem?

More replies
Answer Match 73.92%

I just try to connect the thunderbolt (from my laptop) to a display port (my monitor) and nothing happen.
The cable I use is coming with my monitor, mini display port to display port.

I had google for this, some mac can use their thunderbolt as a mini display port, can win7 do the same thing? or I need to find a thunderbolt adapter? or I need to find an ext. graphic card to have the video output?

A:can I use thunderbolt as mini display port?

Hi have you tried using the FN key with an F key to select it to the external monitor

2 more replies
Answer Match 73.92%

Basically, I have this eye-finity graphics card, and it has 5 mini display ports, I need to buy a Mini-display port to VGA, but I'm not sure which will work.

On Amazon they have Mini-display port converters for Mac, they all seem to be Mac related, would a mac one work on my Windows PC? since it is just a converter? If not, then where could i buy one for PC for cheap?

I appreciate you taking your time reading this.
 

A:Mini-Display port to VGA converter

A few to choose from here: http://www.newegg.com/Product/Produ...sNodeId=1&Description=mini+displayport&Page=2

It is a hardware adapter, so the operating system doesn't matter.
 

1 more replies
Answer Match 72.24%

I'm looking at a 4k external monitor, and had assumed the need for the Workstation dock for a DP 1.2 connection to the 4k monitor.  Is the P50 (right side) mini Display Port able to drive direct connection to the external monitor (at 60hz etc) ... with a miniDP-to-DP adapter?? thanks 

A:P50, mini Display Port ... direct connect 4k monit...

According PSREF http://psref.lenovo.com/syspool%5CSys/PDF/ThinkPad/ThinkPad%20P50/ThinkPad_P50_Platform_Specificatio... Max resolution:[email protected] (DisplayPort via Mini DisplayPort cable);[email protected] (Thunderbolt);[email protected] (HDMI)



__________________________________ThinkPad (1992 - 2012): R51, X31, X220, Tablet 8.Do you care about privacy and security ? Leave Google behind

1 more replies
Answer Match 72.24%

Hi,I have a ZBook 17 G2 and  its plugged into a docking station. Its been fantastic, however, seems wth the last update it installed on 9/25 (Intell Wireless LAN) my mini-display port no longer functions when plugged into the station. I've a dual monitors plugged into the dvi output on the dock, and I had a mini-display port plugged into a large external LCD (to show clients projects up on a big screen). I had been working totally fine- being able to see an extended desktop on both the two regular monitors )plugged into dvi output on the dock) and the larger one plugged into the mini-display. If i remove the laptop from the dock, the mini-display port functions again, so I know its nothing wrong with either the external display, the cables or the the mini-display->HDMI adapter. Any idea how i can roll back that update? I think its the culprit, as it was functioning totally fine until it was installed.Thanks for your help,-Dan

More replies
Answer Match 72.24%

Hi, I just tried to connect my macbook pro (early 2015)with EliteDisplay E240 (as an external monitor) using 'Mini display (Mac) port to HDMI (E240)'. However, the monitor or macbook do not show any reponses. Do I have to install a specific driver on my mac for this issue?

More replies
Answer Match 72.24%

Hello, I am attempting to use the mini display port outpt on the Thinkpad Yoga14 to connect to an HDMI monitor using a miniDP to HDMI adapter. I've tried two different adapters. The monitor is never recognized. However, the mini-display port will work with a miniDP to DVI or miniDP to VGA adapter cable (I verfied this at a store where there were multiple cables and monitors to use).
 
miniDP to HDMI: does not work
miniDP to DVI: works
miniDP to VGA: works
 
Has anyone else seen this problem?
 
 
Moderator comment: Model added to subject for clarity.

More replies
Answer Match 67.62%

Hello. I got my Lenovo Thinkpad p50 with W10 about 3 weeks ago and have been using it with lots of success but just today I tried to connect a Dell U2414H conventional external display via mini Display Port and the laptop sounds once I plug the cable but then the external monitor goes to "Energy Saving Mode" and shows only black screen. Looking inside the configuration at desk.cpl, both, integrated and external displays are shown but for the external display the fields of "Resolution", "Orientation" and "Advanced config" are grayed so I can't change anything. Can anyone please help me with this? Thanks in advance.

More replies
Answer Match 65.52%

Ok, it all started when i was dloading a program to make windows setups.(.msi). Then i decided i didnt like it and uninstalled it. After tht was done. I decided i was going to stick with Inno Setup. I have used it before and liked it. But then i noticed all or most of my desktop icons were missing. And all the start menu ientries were missing. So i figured i had a virus. SO i went to do a system resotre. But found that i oculdnt find it...due to to missing folders. So i decided i would then try to boot into safe mode. When i tried to boot it said it cannot find a file(same with normal mode). Ubfortunely i dont remember what it said. I think it said windows cannot find NRDL press ctrl alt delete to reboot. or somthing like that. Any ways i tried a few more times and it all failied. SO then i tried the windows recovery console. Nothing. I really didnt know whre to go with it. Then i decied to go into the bios and reset. Or i thought i was resseting them. I seleteced. "fails proof settings". But then i rebooted and things got worse. My monitor is now getting no signal, it says it is ocnnected though..... So i cant see what i am doing. Please any ideas. I have a Programming project that i have been working on for months now. i dont wanna lose that. And a Lang arts project. I am very computer savvy but i have tried everything. and yes i tried a differ monitor. No Dice.

Specs.

Xp Home
Nvidia 6200 TC
amd 3000+
Standard Monitro.

Plese help i need my computer i cant go on... Read more

A:Windows wont boot, Monitor wont display picture. Cant access safe mode

14 more replies
Answer Match 64.68%

When I connect 60" LG monitor and duplicate my laptop screen I can only see the bottom toolbar on the monitor. The Laptop screen is fine. Any ideas??

A:Monitor display problem on VGA port

Does an extended desktop work, or does it do the same?

1 more replies
Answer Match 64.68%

We are using the display port for a second monitor.  It works for a while but eventually locks the computer up.  we have to disconnect the display port cable, log back in and then reconnect the display port cable, and it works fine again.  We've switch the display port cable to the main monitor, however the problem follows the displayport cable.  The frequency is once every week, and we about 20 computer utilizing the dual monitor setup.  The second monitor is always using the VGA port.

More replies
Answer Match 64.26%

My computer crashed about a month and I want to format it. When I plug in the keyboard to go into bios it does not work. if i plug in anything at all it doesnt work, every usb port that is.
What is wrong?
its an asus eebox 1501
thanks
 

A:USB port wont work

7 more replies
Answer Match 64.26%

Hey,

I am on a laptop with a gtx 765m. I am trying to connect a thunderbolt port to a display port monitor. My understanding is that thunderbolt is backwards compatible with display port. But, for the life of me I can not get it to work.

I am using a minidisplay port -> display port cord.

I have ended up hooking the monitor up with an hdmi cord for now. FYI the monitor is a 2560x1440 monitor if that matters.

Thanks,

A:Thunderbolt to display port monitor. GTX 765m

Do you know for sure the video is ported through the Thunderbolt connector?

Any chance we could get your computer model number?

4 more replies
Answer Match 63.42%

hi

I've been having some USB issues on my computer today but ever since I built it and purchased a USB 3.0 stick, it only works in USB 2.0 ports? I got the stick from ebuyer years ago now - also it used to copy large files at 15MB/s in USB 2.0 as did a USB 2.0 stick I have

today I had a BSOD and WhosCrashed read the memory dump (which is now gone) and it said it was kernelbase.sys and I can only find info on kernelbase.dll, all my USB ports would only work foor the key/mouse combo and my phone, 3 USB stick and a HDD i have would not work and showed up in dev manager with code 39.

so, ive restored the computer back 3 days and uninstalled loads of stuff including BitDefender as I only installed this the other day and Unity & few other things Ive installed in last few days - now it seems to be able to work again but like I say the USB 3 stick doesnt work in the Blue USB 3 ports, its a gigabyte H77-D3H rev 1.0 and doesnt say which USB3 driver to install but the Intel one doesnt work and the Etron one does, but still no joy on the USB 3.0 stick

ive done SFC /SCANNOW and nothing was found

has anyone got any advice

edit: I have since rebooted the machine and it said your device did not install (USB) even though they work still as mentioned above....now code 28 on this one

PCI\VEN_8086&DEV_1E31&SUBSYS_50071458&REV_04

A:USB 3.0 stick wont work in 3.0 port

turned out i was getting the drivers from the wrong page... its GA-H77M-D3H and ive been using GA-H77-D3H - the USB 3.0 works in its port now

1 more replies
Answer Match 63.42%

hi guys,

trying to setup port forwarding so i can view my cameras on my dvr over the internet, internally its working fine...
i have the port opened on the firewall of my router to its correct (the DVR) ip address 192.168.1.127
i cant rdp into another computer either
i have tried two different routers with the same result (one is brand new, that come from the isp)
its like the rules are just not working
i phoned my isp who said that they dont offer support for port forwarding!!!
When i use shields up or a similar port scanning website it says no ports are opened
where can i start looking to resolve this problem?
any info appreciated...
 

A:Port forwarding just wont work

8 more replies
Answer Match 63.42%

Just wondering if any 1 no's how to enable the dvi port on my acer laptop, my philips tv has dvi input but says no signal but it's no the tv's fult 4 sure thanks 4 looking

spec: Acer Aspire 9502wsmi (laptop)
1.73 Centrino, ATI m Radeon x7oo pci express 128 vram, 80GB HD, 512 DDR2, 17" WXGA TFT LCD.
TV / mpeg built in.
Bluetooth & wireless
 

A:Acer DVI port wont work

If it is anything like my HP laptop, you use Fn keys to switch from the LCD to the output jacks.
 

1 more replies
Answer Match 63.42%

We have a large monitor (Dell 3007wfpt) connected to a Dell Precision M4800 laptop. The large monitor only works with DVI-Dual Link so we have a Display Port to DVI-D adapter (Accell UltraAV DP to DVI-D). The user of this machine was working in Outlook on this external monitor right after a fresh boot and noticed the mouse cursor was moving very slowly. Eventually the external monitor froze completely and the laptop monitor showed a BSOD whilethe external monitor showed the same frozen static windows/outlook image. I checked the crash files and noticed two dumps (although he only noticed one crash). Both dump files seem to point to a USB device. This Accell adapter uses displayport and usb (for power). Could someone check and confirm if this is the case through the dump files?

The only other USB devices is a Logitech wireless receiver and a USB hub/card reader that is built onto the Dell monitor. This usb hub on the monitor does not have anything plugged into it.

Thoughts? Could it be the monitor usb hub/card reader? Or the displayport adapter? If it's the adapter, then would an external powered usb hub be a fix for that? Thanks!

A:BSOD usb related, monitor hub or display port adapter?

Hi Rogue75.

First of all, Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs. Otherwise, stop 9x9F cannot be successfully prevented.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and the touchpad "Apoint".
Apply > OK
Accept then restart.
Next come to the BSOD. Do you use the webcam?
(c:\program files (x86)\dell webcam\dell webcam central\webcamdell2.exe)

Better you disable the webcam in device manager. See how it goes. Observe if there is any more BSOD after freeing up the startup items and disabling the webcam.

But, the webcam might be necessary for you. Search for any possible updates in Support | Dell US for your Dell Precision M4800. If any update to the webcam is there, apply it.

Report us for any further BSOD.
________________________________________

Code:
BugCheck 9F, {3, fffffa80113cba00, fffff80000ba2748, fffffa8013a14010}

Probably caused by : usbccgp.sys

Followup: MachineOwner
---------

Code:
>[ 16, 2] 0 e1 fffffa80113cba00 00000000 fffff88004051fd4-fffffa8011558340 Success Error Cancel pending
\Driver\usbccgp ks!CKsDevice::CompleteDevicePowerIrp
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 1 fffff... Read more

1 more replies
Answer Match 63.42%

Hi,

I'm wondering if someone possibly help as I'm not sure where to go next.

I have a Dell U2311H monitor connected to a XFX Radeon 6850 via its DisplayPort and I'm having problems with random flickering where the monitor picture goes black for a few seconds.

I have another monitor, an old HP, connected via DVI and a 1080p Sony LCD TV connected via HDMI.

I have had the Dell and HP monitors connected via DVI for months without any problems but I wanted to extend my Win 7 desktop to all 3 displays and I believe you can't do that using DVI, DVI and HDMI, hence why I want to use the display port.

I have tried 2 different displayport cables, so I don't think it is that. I don't have another gfx card or monitor to try to eliminate from the process.

One thing I did notice is that if I change the resolution from 1080p to 720p it seems to fix the problem. I'm wondering if it could be something to do with the displays running at different resolutions? Although I did try both the TV and Dell running at 1080p but there was still a problem.

Any suggestions greatly received,

Thanks
 

A:Display port flicker on Dell U2311H monitor

Hi,

I happen to see this thread when searching for solution for the same problem. I am using 3 monitor display setup, using U2311H connected with displayport to HD 5770 graphic card and 2 samsung 940b monitor connected with DVI to the same HD 5770 graphic card.

U2311H flickers (screen become totally black) for 1 to 2 sec at random times and return to normal.

I did not try any other display port cable yet because I did not have time to buy another one.

Seems like adbarnes have the same problem, I am wondering if it is because we are using 3 display setup? or display port? Or maybe there is something wrong with U2311h?

I have been using U2311H for some time, this flicker problem happens recently.

adbarnes, have you discovered how to solve the flicker problem?

My dell U2311H is using 1920x1080 (recommended) resolution
My samsung 940B is using 1280x1024 (recommended) resolution
(all using the recommended resolutions)
using win 7

Thanks everyone for helping
 

2 more replies
Answer Match 63.42%

Greetings! I'm experiencing a problem on what appears to be HP Prodesk 600 G2 computers exclusively.  Intermittently, when the computer wakes from sleep or standby, the computer loses its monitor drivers. When the computer wakes the monitor is now in 640x480 resolution and if you look in the Screen Resolution window it shows the current driver is the "Generic Non-PnP Monitor".  These computers are hooked up with dual HP displays of like model and when it happens the fix seems to be to simply restart the computer. While this is easy enough it is extremely disruptive to the work of our users and so I've been tasked with finding a real fix to this problem. To that end I have updated the computer with the latest BIOS from HP as well as the latest Intel graphics drivers from HP's website (Intel Graphics 530 chipset) but to no avail. We have also tried using different monitors and it continues to occur intermittently. Also, we have many HP Prodesk G1's in the building and none of these have this problem. This leads me to suspect that this is a problem exclusive to the Prodesk G2's and not with Windows or the monitors we are using. It should also be noted that both monitors are connected using the on-board display ports. My hunch is that it is the Intel Graphics 530 (onboard) graphics chipset that that's the problem but I don't think we should have to buy a seperate graphics card to get two displays to work on these computers especially when it's so clear th... Read more

More replies
Answer Match 63.42%

I have an HP ZR22w monitor with three inputs: VGA, DVI, and DisplayPort. I want to hook up a computer to the DisplayPort, but my video card id HDMI out. All the cables are sold as DisplayPort source out to HDmi monitor in. Are these cables reversible?
Can you recommend the right way to hook this up? Is there a cable that exists for this situation? Do I need a combination cable/adapter?
Thanks!
 

More replies
Answer Match 63%

New laptop. Good HDMI cable working fine. Sony Bravia TV uses the HDMI port too. I try to use a Display Port to HDMI converter from E-Bay and what happens is the image on TV flashes at 1 sec intervals.  The E-Bay seller is willing for refund as he is sure it worked with WIN 8 OS. IS there any patch I can try in the laptop or alternately should return the adaptor to E-Bay and buy one from HP ??

A:Display Port to HDMI does not work on Elite Pro 9480M ( WIN ...

Hi, Have you found the anwers for this problem? Im having the same issue with my machine. Please let me know Thank you Kind RegardsKarin

1 more replies
Answer Match 62.16%

Hi, I change my motherboard in my Elitebook 8560w and after replacement I have two problems.When I turn on my notebook, there is some black screen with ME is in recovery state during post!I try to reflash BIOSFlash firmware for intel me FirmwareNothing happened with this, but notebook works well.Display Port does not transmit any picture Can you help me? Maybe there is some problem with region of motherboard, but i dont know how to flash these things. Have a nice day, Michael

More replies
Answer Match 62.16%

I just built a new HTPC, put Windows 8.1 on it, had RDP working fine for days. Even out of my house with port forwarding. Once I got everything where I wanted it, the last step was to change the port for security. I changed the registry Port Number (at HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, Terminal Server, WinStations and RDP-Tcp), to a 5 digit number starting with 13 so its within the limits (also, I used to use the same port previously with Windows 7). Restarted and I could not connect. It did not work. So I tried putting it back to 3389 and its broken now too. I have a laptop on 8.1 also and changed it at the same time, now I have the same issues. I have tried everything I can think of. Check and even turned off the Firewall, used netstat -a and it seems to be listening on the correct port.
It seems to me there is something else at play here. Can anyone help me? This is at a bad time since I have leaving town for a few days and need access, I have to use VNC.
Help please.

FYI, I posted this exact same question here and have gone through some diagnostic steps to no avail: https://social.technet.microsoft.com...c-c24c20f3b2e7

A:Changed RDP listening port, not 3389 wont work

Any help here?

11 more replies
Answer Match 61.74%

I cant get Age of empires to work multi-player in www.zone.com, I got the correct version, and downloaded all the patches.

I got wireless Internet @ 250 KB sec, 4 port router linksys model NR041, HP celron 1.1 GHZ, Window XP, 256 ram,

I can play it by myself, but cant join or host. say's "Unable to join Game". I checked my ping, and it is good.

When I go to start, run type "dxdiag" I get a message, "Cant find DXDIAGN.DLL".
I think I need to open a port, but don't know how. I appreciate any help.

Thanks Ben
 

More replies
Answer Match 61.32%

I am helping someone who messed up their computer. They somehow adjusted their advanced monitor settings (they went to screen resolution, advanced settings, troubleshooting tab, and changed the settings in that). The screen went black and nothing would display. I hooked up an external monitor and installed a fresh version of Windows 7 on it, but this did not solve the issue. Now there is a fresh version of Windows 7, but the monitor will only show up on an external monitor. It only shows up when I start the computer in safe mode, or do a hard reset and displays (RTC mode fixed - Time and date may be wrong
Invalid configuration information - please run SETUP program
Time-of-day not set - please run SETUP program
Strike F1 key to continue, F2 to run setup utility Press F5 to run onboard diagnostics.) That is only on the external monitor. I checked the connection to the screen and it was secure and the screen is lit up until I press the key to display to an external monitor. The computer is a Dell Latitude D830, any help would be greatly appreciated, thanks.

A:Monitor Wont Display

Quote:




RTC mode fixed - Time and date may be wrong Invalid configuration information - please run SETUP program




This would indicate that the CMOS battery on the motherboard needs replacing.

6 more replies
Answer Match 61.32%

So I have a Dell Dimension running Windows 7 with one 17" Dell monitor and one 15" Viewsonic monitor.

I have both monitors connected to a VGA splitter which is plugged into the system board video card.

When I access screen resolution it only shows 1 monitor display but displays the same thing on both monitors. How can I use the 2nd monitor as a extended display?

A:2nd monitor wont display on Win 7

Hi -

From Microsoft - Dual Monitors -

http://windows.microsoft.com/en-us/w...tiple-monitors

http://windows.microsoft.com/en-us/w...tiple-monitors

http://windows.microsoft.com/en-US/w...tiple-monitors

Regards. . .

jcgriff2

`

5 more replies
Answer Match 60.9%

My Lenovo Thinkpad T450s will not power on. It has been charging overnight after being on hiatus for a month but does not seem to be responding. (I've also tried a different charger.) The power button green light and the red light on the cover above the "i" have been unresponsive and will not light up. I have tried...Unplugging and taking out battery and then holding power button for 30 seconds.I've tried utilizing the reset button on he underside of the laptop. HELP?!?!?!?  

More replies
Answer Match 60.48%

Ok, i recently built a custom pc:

intel core 2 duo 2.13ghz
250gb sata hd( wasnt problem as its workin on my old dell pc im using now)
ati radieon 512mb x1600 (works with dell pc am using now ^^ same above)
biostar pt890 775 se motherboard, + 1gb 533mhz ram

if used many PSUs, literally latest 1 cost me 20, tried reseting CMOS( take battery out/move pins etc) and removed the ram n tested the pc but no luck and i BOUGHT a ASUS P5VD2-X motherboard and i got the same problem, they both say the compatible with intel core 2 duo so i dno wat goin on.

i had even managed to INSTALL WINDOWS XP PROFESSIONAL ( prior to monitor problem) , and eventually use the internet rite... Then when my sister had restarted the pc or it switched off and having trying to start the pc, the monitor(dell) wont display anything!!? the orange led jst keeps flashing. Also, before installing xp i was getting a error message saying please re-enter cpu settings in cmos or somthing and press f1 to continue, f2 to boot menu n other options but i just kept pressing f1 to carry on.

The PSU that came with my case didnt have a sata power connector so i used a dell psu (2-3yrs old) to power the new pc up. I tried another g card ( ati radieon x300 Then i took the monitor to test it on another pc(my private pc) and my graphic card has blown lool!!, well i might have accidently pulled the plug but its blown, my 7900gtx nvidia 512mb with an amd athlon x2 d core 2.4ghz now MY pc is giving me a "bios c... Read more

A:PC Monitor wont display, led flashing

The orange light is flashing because the monitor is not receiving a video signal from your graphics port. So you either have a bad graphics port, or bad graphics driver, bad video graphics card, or your have something inserted incorrectly.
Remove and reseat all cables. Remove and reseat video graphics card. Remove and reseat your memory modules.
But it is possible you may have blown your system board, or have other serious problems related to what you have described.
Most Dell power supplies do not work properly in other systems. They are often proprietary, and have special power out puts. You might first try a new or known good power supply which has all the appropriate power connectors.
Good luck to you. Please let us know how it all turns out.
 

2 more replies
Answer Match 60.48%

Hi,
I run my laptop on an external 19 inch monitor, the laptop has just been upgraded to windows 7.
I want to set the resoltution to 1024*768 however when i do i get no signal to the monitor. But it allows me to set a higher resolution such as 1280*1024 and lower such as 800*600, Just not 1024*768.

This is annoying when i want to play games as its no powerfull enough to play in 1280*1024 so i have to put in 800*600 which looks made.

Any help appreciated.
Thanks
 

A:Monitor wont display in 1024*768

I suggest checking for updated drivers for your graphics card, I would first do that before anything else.
 

1 more replies
Answer Match 60.48%

I moved about half a year ago and left my old dell xp desktop in the garage ever since. I just took it out to use it, But it wont show anything on the screen. I tried reseating the ram and cmos chip, and tried two 2 cords on two monitors, with flushing the remaining power by unplugging and pressing the button but no luck. Computer sounds good and i can feel my hdd running but i cannot get anything to show up on the screen. It worked before the move, any idea on what i can do to get it working?

A:Old computer wont display on monitor.

Has the graphics card been jiggled loose by the move?

2 more replies
Answer Match 60.48%

Hi

I was wondering if you could help me.

I am running windows 7 and I am trying to connect a Second monitor to my laptop Tecra M5 but for some reason it detects it but it will not display anything.

What can I do?

A:Tecra M5 - Second Monitor Wont Display Anything

Can you please tell us which notebook model do you have, which port and cable you use and is Win7 original OS version that you got with your notebook?

7 more replies
Answer Match 60.48%

hi,

I just recently bought a gaming PC for Christmas.

i Turned on the power with the screen connected through the mobo's Vga adapter but it wouldnt display anything, the monitor kept displaying No signal and turning off.

So i connected the VGA to my graphics card and it worked, but my problem is that i want to be able to connect 2 monitors and if 1 port (MY primary) doesnt work i cant do that.
Ps.

I can use my computer through the secondary Vga port, but its on my graphics card, so if this is a driver issue i should be able to fix it right?

PC Specs:
AMD Phenom II X2 545
4 GB RAM
Graphics card: Nvidia Gforce 9500 GT

Please help

Thanks

Jordan
 

A:Primary monitor wont display

open up bios when the computer starts up. there should be a setting there for onboard graphics.
 

1 more replies
Answer Match 60.48%

I just assembled my new computer, and am currently in the process of installing XP pro. The problem is that my mouse isn't working and the cursor wont display on the screen. The screen i am at looks like something like this http://www.buildeasypc.com/pics/windows_xp/winxp15.jpg but the message says "the file spxcoins.dll" on (unknown") is needed

type the path where the file is located and then click ok, but i cannot click ok, because the cursor wont display on the monitor. Can someone help?

 

A:Cursor wont display on monitor

help nao
 

2 more replies
Answer Match 60.48%

I moved about half a year ago and left my old dell xp desktop in the garage ever since. I just took it out to use it, But it wont show anything on the screen. I tried reseating the ram and cmos chip, and tried two 2 cords on two monitors, with flushing the remaining power by unplugging and pressing the button but no luck. Computer sounds good and i can feel my hdd running but i cannot get anything to show up on the screen. It worked before the move, any idea on what i can do to get it working?

A:Old computer wont display on monitor

Has the graphics card been jiggled loose by the move?

5 more replies
Answer Match 60.48%

My pc will turn on but will not display on the monitor, very rarely it will switch on like normal. Every time this happens the computer lets off a high pitch squeaking noise and the fans and components sound like they're revving. I have to keep turning it on and off by the main power button on the PC and after about 10-20 times of doing this it will just turn on properly with no weird sounds or nothing like there was nothing wrong with it. Please help me to try and figure out what the issue is and what I need to fix or repair. The squealing noise sounds as if it's coming from the main power box inside the computer. Please help, thanks.

A:(help) computer wont display on monitor

I have tried the unplug everything and hold the power button down for 30 seconds technique but it rarely works.

1 more replies
Answer Match 60.48%

Hi I got this problem when changing monitors on my Pc a while ago.
I have now got my PC and have tried it on 3 different monitors and get the same outcome.
The initial BIOS and DOS boot displays come up, along with the Windows XP Loading screen, but as soon as windows kicks in and the display settings change, my monitor or any other I have tried just stays black.
Windows itself boots, as I can hear the login sound through the speakers!
I have tried going into safe mode to play about with the setting of my display card but it wont even let me into safe mode!

Is this something to do with the refresh rate setting?

Appreciate any help towards fixing this matter
 

A:Monitor Wont Display in windows

Thanks for the advice mate. I will give it another go. What is the best refresh rate to set it at, so that it will work with most monitors?
 

4 more replies
Answer Match 60.48%

...and the DVD burner wont burn via windows XP. I have to use "drag and drop CD-DVD" from sony to burn a cd. This all happened on the same day. Something is attacking drivers and softwars programs.

Here is the log from the Panda Scan.


<quote>Incident Status Location

Potentially unwanted tool:Application/PRScheduler Not disinfected C:\Documents and Settings\Katie\Start Menu\Programs\Startup\PowerReg Scheduler.exe
Adware:adware/azesearch Not disinfected c:\windows\system32\ztoolbar.bmp
Adware:adware/dollarrevenue Not disinfected c:\windows\keyboa... Read more

A:Programs wont load, graphics card doesn't work, com port not working...

Update. AVG free is finding nothing. Ad-Aware SE would hang up on me but I think the panda scan took care of that because I ran ad-aware again and it ran through to completion... however it didn't fix any problems.
My Pole Display for our store is not working from the COM port.
My Graphics card isn't giving me the technicolor display anymore because I disabled it, but of course now I can't play games without the hardware acceleration. When I enable it and start the system over it does it all over again.
Generally comp runs slow... When I go to shut down I have to close lots of dll file programs. On start up I get pop ups.

Please help...

Thanks

14 more replies
Answer Match 60.06%

Hey everyone,
So today my friend dropped his laptop and said that the computer wont work. So I took it in my hands. The laptop is a Acer 5532-5194. The problem is that when ever i boot the laptop, all the leds turn on ( the power led, the optical drive led) and even the optical drive can eject, but no display! Its just a black screen and nothing appears. I tried to boot it without the battery and just AC adaptor but that didn't make a difference. I swapped hard drives with my own laptop, that didn't work. Not sure what else to try and what the heck the problem is. I even plugged it into a external monitor seeing if that would do any good...NOPE, I was wrong. So could someone else tell me what I could do to fix it and what the problem may be?
Thanks
 

A:Laptop display wont work

11 more replies
Answer Match 60.06%

I have recently purchased a second hand toshiba satellite. I formatted the drive and istalled xp pro but i can not get the display drivers to install. The laptop has a nvidia geforce fx 5200 video card in it and i have tried downloading the display drivers fot the geforce cards from nvidia.com halfway through instalation i get this message.
"the nvidia setup program could not locate any drivers that are compatible with your current hardware setup will now exit"
Any help will be greatly appreciated. Thanks!
 

A:Display drivers wont work

Graphics Drivers

Are you downloading the drivers using the same laptop? If you are then it might be worth trying to download them onto another machine first, burn them onto a cd rom and then try re-installing. Also, go to the manufacturer of the laptop website. Laptops are strange beasts sometimes and although it may say it is an Nforce graphics card, it may be a "hybrid", which could require special drivers for it. Hope this helps!
 

2 more replies
Answer Match 60.06%

Im having a really tough to TS problem with the reliability monitor. For the last week, it no longer displays any data and the graph dosent render.

It just display as blank with no data. Some things to note...

1. The RAC published and State data are being updated and published each day as they shouold. So the data does exist.
2. I have tried the "Resetting RAC" methods that worked for Vista. But the fix dosent work for W7.
3. I cant think of anything that may have changed. I havent deleted any folders or log files.
4. I've used Process Monitor to trace the events when the reliability monitor executes and everything looks fine.
5. There are no errors or warnings in the event viewer.
6. I havent installed any Windows Updates.

So Im hoping that someone can think of something I am missing here. Oddly it used to work for some time and i ran it each day. Then all of a sudden one day it just stopped.

Could this be a permission issue possibly? I do recall changing permissions for C:\Users\Me\AppData. Are there any folders or logs within that path that might affect RAC? Are there any services that are required for RAC to collect and render data?

Any ideas would be greatly appreciated.

A:Reliability Monitor Wont Display Graph

You're not a "registry cleaner" (ab)user, are you?

Does the same symptom occur in safe mode?

Is the wmimgmt service running? Stoppable? Restartable?

As a wild stab in the dark, one of the standard causes is the loss of COM registrations from components used in rendering that info. If you haven't already tried all that, do a web search on regsvr32 and "reliability monitor" for a list of DLLs worth re-registering.

2 more replies
Answer Match 60.06%

After connecting my new hdmi cable the resolution has been off. It's currently at 1920 x 1080 but is slightly too large for my monitor. Its cutting all the icons pinned to the task bar in half. When I try to customize the resolution in the NVIDIA Control Panel it says the custom resolution is not supported by my display even when I don't actually change any of the numbers.

Does anyone know how I can change my resolution to fit my monitor exactly? Thank you.

A:Monitor wont display correct resolution

Hello and welcome to the forums Clepe,

You could try re-sizing the display in Nvidia control panel (See attached image)

Paul.

3 more replies
Answer Match 60.06%

I posted on here before but i think my post got pushed down too far. Anwyay My computer has been restarting randomly for a couple of months now and now when i turn my computer on nothing appears on my screen. The fans in my computer are running and lights are on inside but nothn happens on screen. Any suggestions of what could be the problem?

A:Computer Keeps restarting, now monitor wont display

sorry here are system specs:

motherboard: ASUS| CROSSHAIR IV FORMULA 890FX
power supply: PSU CORSAIR|CMPSU-750TX 750W RT
CPU- CPU AMD|PH II X6 1090T 3.2 G AM3 RT
SSD 128G|CRUCIAL CTFDDAC128MAG-1G1
DVD ROM LITE-ON|iHDS118-04 18X %
GTX 480 Nvidia Graphics card
Windows 7 64-bit

2 more replies
Answer Match 60.06%

Please help me!

i just installed a dvd burner. When I went to turn on the computer, the computer turns on and it beeps, but the nothing is on the monitor. I tried the monitor on another computer and it works. I disconnected the dvd burner and still nothing. The computer sounds like everything is working, but just nothing on the screen.

Can anyone suggest anything???

Thanks
 

A:No display on monitor but monitor does work

7 more replies
Answer Match 59.64%

Hi,
I searched the forums and the only posts involved the AMD card and I have an Nvidia card.  I couldn't find any information on the K4000M so I called tech support and they told me it was 2560x1600.  But then I found another forum where they said even the K1000M can do 4k.
I hooked up my 4k TV to the HDMI and used the Nvidia custom resolution to set up 3840x2160 at 30 hz and the display works.  The graphics look great, but the text is super fuzzy.  The TV supports 4K at 60Hz, but I'm not sure if the HDMI port on the back of my M6700 supports 60Hz.
Does the HDMI support 60Hz at 4k?  What about the display port?  Any idea why my text is super fuzzy while the graphics are razor sharp?
Thanks,
Ali

A:Precision M6700 Nvidia Quadro K4000M max resolution 4K monitor display port hdmi refresh rate

Hi,
First, I'm going to refer you to this article from Nvidia discussing Ultra 4k Resolution.  The important statement is this:

The current HDMI 1.4 standard only has bandwidth for 4K at 30hz. HDMI 2.0 will add support for 4K at 60Hz. Details should become clearer in late 2013. There are a few TVs on sale today that support 4K @ 30Hz through HDMI.

Now, according to this review and article about the K4000m card specifications, it states that the card has HDMI 1.4 connections, which means it won't, theoretically, handle Ultra 4k resolution at the 60Hz bandwidth.
I also found this on documentation online about the Precision 6700.   

The Precision™ M4700 & M6700 incorporates HDMI version 1.4. Features

So, unfortunately, it doesn't sound like that card will support the higher refresh rate needed.   
As for Display port 

DisplayPort cables are much simpler to define: There’s just one type! The current version, DisplayPort 1.2, delivers enough bandwidth to carry video resolutions of up to 3840 by 2160 pixels at a refresh rate of 60Hz
 


So Display Port would be a much better option for you, if available.
I hope this answers your questions.
Todd

2 more replies
Answer Match 59.64%

Hey, guys... I'm just wondering if someone can help me here about my DVI.. Because earlier my DVI cord still works on my Acer X193HQ 18"5 and I tried to dual display my MSI N430GT in a VGA.. I connect the two monitor on my one video card, the Acer X193HQ in DVI then I have another monitor Acer H193HQV in VGA... After I turned it on my pc.. Theres no display.. I turned off my computer then back on a single monitor the DVI-I on my X193HQ = no display (no signal) But when I plug my VGA to the monitor is has a dispay but when DVI it has no signal... Please help me.. I need a DVI so that I can NVIDIA scale it cause VGA doesn't have NVidia Scaling.. Thanks
 

A:My DVI doesn't work - no display on the monitor

Check your DVI cable for bent pins at each end. For test purposes try to get another DVI cable and see if it will work.
 

1 more replies
Answer Match 59.64%

for some reason when i got upgraded my WMP9 into 10 it worked fine but then one day it decides to start putting an error message saying sorry windows media player has encountered a problum and need to close. i dont know how it happend. but also ever since that happend i also cant open my power dvd. and thoughs are the only 2 things that wont open. Can you please help me fix this problum? thnx for reading this
 

A:WMP & Power DVD wont work (ERROR Display)

14 more replies
Answer Match 59.64%

I'm using a Dell U3415W monitor. My video card is AMD Radeon RX480. The monitor is connected via DisplayPort to my computer. The monitor is connected via HDMI to my work laptop. When I want to switch over to HDMI, it acts as if I shut off the monitor on the Displayport shifting everything over to my secondary monitor. It causes no problem, but drives me nuts because when I switch back over to DIsplayPort, I have to move my open programs around again. Is there any simple way to make this stop? If I don't use DisplayPort, and instead use HDMI/DVI combination, the behavior described does not happen. I'm guessing that is just the way it is, but I'm hoping there is an easy way to make it stop.

More replies
Answer Match 59.64%

I have 3 monitors connected to an AMD HD5770 graphics card. Two monitors connect via HDMI, and the third through a Sapphire Active DisplayPort->DVI adaptor. Things have been working fine for years, but recently I started sleeping my computer when I am not using it during the day, as opposed to my previous habit of leaving it on all day and then shutting down at night, and a couple of days after starting this new habit, I received a 'Display Port Link Failure' message:

"The system has detected a link failure and cannot set the requested resolution and refresh rate on your DisplayPort display. Your display might not support the requested resolution or there may be an issue with the cable connecting the display to your computer"

Now, even upon resuming my normal habit of leaving the computer on and shutting down, the monitor will work sometimes but randomly stop other times.

How can I either fix the issues with sleep, which I would prefer since I want to save energy (a money issue rather than believing my actions make any difference to the environment), or if there is a problem somewhere, determine if it is the graphics card or the adaptor that needs replacing.?

A:Display Port Link Failure, Active Display Port->DVI

It could be the hardware is starting to give out. Not all problems are software related. Going to be hard to nail down if you don't have another cable. Could be the cable or the port.

Any way to test with a straight cable, not the adapter cable?

2 more replies
Answer Match 59.22%

I just got a new cpu and i hooked it up to my monitor that i already have and it wont work. so i hooked it back up to my old cpu and it works fine. At one point it said it was in power save mode. I also have another monitor and tried hooking it up to the new cpu and it did the same thing. Its almost like they are both in sleep mode. please help!!!
 

A:monitor wont work

The problem is with the computer, not the monitor. Is this a brand new computer? Used? Has it ever booted? Do you hear any fans starting? Beeping? Any indications whatsoever that it's actually starting up?
 

3 more replies
Answer Match 59.22%

Okey my problem is that when i try to start my computer the monitor wont start, it stays black and nothing happens.
I have tried with another monitor but the same problem there, and when i tried my monitor on my laptop it worked in the beginning so it should be something with the hardware.
Everything is brand new except for the RAM.
I hade exactly the same problem with my other older computer but i had several problems with that computer, but i say again, The CPU, GPU, PSU and the motherboard are all brand new.
I really hope someone can help me now cause it's really important that i have a working computer.
 

A:The monitor wont work!

It would help if you told us what your hardware is. if your mobo hasonboard raphics make sure that the onboard graphics are disabled since you are using a video card.
 

18 more replies
Answer Match 59.22%

I just got a brand new eMachines T2460. I could not offord the monitor and have a Packard Bell 1010...FCC ID:BEJCP480, made in 1996. When I connect this monitor, it displays fine, until Windows starts (XP) and then the display goes dark. Do I need to get a driver for this monitor, or what? This monitor looks as if it just came out of the box and has beautiful color upon boot. I really would appreciate some help using it.

Thanks in advance!
 

A:New PC, old monitor wont work

11 more replies
Answer Match 59.22%

Hi
I am using Vista for business (32-bit) on a new Dell Latitude E4300 laptop. I want to use a new external monitor (Dell S2209W) with it.

The external monitor is connected and works, but I cannot get it to display at its proper top resolution of 1920 x 1080.

When I check the displays in the laptop's device manager, both the laptop and the external monitor are given as Generic pnp. Attempts to update the drivers meet with the response that they are up-to-date.When I try to change the display from the desktop, the resolution options do not go high enough for the external monitor.

The laptop display works fine; what I need is for the external monitor to work at the high resolution.
Any ideas gratefully received. Thanks
 

A:Driver for External monitor wont display top resolution

6 more replies
Answer Match 59.22%

Hello,
I have a problem with my E-Machines T3302 desktop. It won't show anything on the monitor. The monitor says "No signal". I have tried re-inserted the RAM and that didn't fix it. Anybody know how I can get my Desktop to boot?
 

A:Solved: E-Machines T3302 wont display anything on the monitor.

11 more replies
Answer Match 59.22%

Hello everyone,

I have finally bought and put together my new beastly computer, but something is wrong.

I have connected everything as best I can and my uncle, who built his own computer, cannot find anything wrong with the way the components are connected. But when I plug my moniter into the 8800GT, nothing happens. I have tried three different moniters, (2 CRT and 1 LCD) and the best I can get is a "No Signal" image on the LCD. The other two remain black.

I have also tried removing and replacing the card, like it says to do in theTrouble-Shooting section of the card's manual, but to no avail.

The fans all start spinning around, the LED's light up... but that's about it. nothing else happens.
(The moniters all work on the other computer, just fine by the way).

It looks very pretty and all, but it isn't exactly living up to my expectations.

Is it normal for a PC to do this untill the OS is installed? I would appreciate any information anyone might have as well as any advice.

Also if anyone can post a link to a good "How To Build A Computer" guide for noobs, I would be very grateful.

Classic Rock.
 

A:Built a new computer, but the monitor wont display an image

Check your MB specs

You may want to look at your motherboard specs.
Some MB if it's SLI requires you to flip a jumper if you are running with 1 GPU if not already set by default. Also if you are running a single GPU it may also require you put the GPU in a specific PCI-E slot.

Good luck.
 

9 more replies
Answer Match 59.22%

Hi All - just joined.

I just removed a NVIDIA GTX 260 and all software and now I cannot get my screen display correct using the blue VGA connector (removed the DVI as my computer does not support one).

Where do I get an driver to support my Asus 22" monitor?

Microsoft display does not offer this resolution. Been on ASUS site and had a look through several pages here, cant find a driver.

A:Asus 22" Monitor wont display 1680x1050

It's not the monitor its a graphics driver issue. You need to go your motherboard manufacturers website and download the correct video or chip-set driver. Even then it might not support that resolution.

5 more replies
Answer Match 58.8%

I think of replacing my mbpr 15" with a T450s with Docking station.The macbook, despite being brand new and very expensive  gives me all kind of glitches in windows 7 like overheating, bluescreens when waking from standby, broken graphics support with the nvidia and 4K monitors, very long boot time, bad battery life, etc. So my bad luck with nvidia makes me feel wanting to go back to Intel Graphics. My Cad software supplier also recently revised his opinion on Intel Graphics, saying that the current chips and drivers work pretty well with Rhino.Also i realized that a quadcore which is constantly overheating and throttling under load isn't really better than a dualcore which has better turbo. And i miss the trackpoint and stiff keyboard pretty hard. As i don't want to dive into the next adventure, i want to make sure that a t450s can suit my needs. I have a brand new Dell P2715Q 4K Monitor and a docking station would be a nice addition.Can this work at 60hz (sst)  over the Docking station?Which dock do i need then, the onelink, basic, Pro or the Ultra?

A:Can the t450s drive a 4K60hz Monitor over the Dock...

it looks like t450s supports [email protected] only via mst, no sst support. This I think is limitation of the 5500 GPU.

2 more replies
Answer Match 58.8%

I know this is a common problem, but so far I did not find a solution to it.  The external monitors connected to my prodock via VGA and DVI blacks out every few seconds, especially during heavy usage. At first, I thought it was a power supply issue so I bought a 90W supply. Now the monitors stays on most of the time, but still blacks out every 10 minutes or so, even during standby with minimal power usage. Then I tried editing the integrated graphics settings, updating/rolling back graphics driver, flashing the docking station firmware with every version I can find, and switching to ubuntu on the other drive, but there wasn't a single combination of settings which would keep the external monitor on for more than an hour without blacking out/disconnecting.  So what should I do now?  System info:i7 5600u, 12G RAM, 16G + 128G ssd, 500G hdd, NO 940M, FHD IPS nontouch screen, Windows 10/Ubuntu 16.04Thinkpad Prodock 04A1, 45W/90W power supply. All USB and audio ports works perfectly. Both monitors are 1440x900 at 60Hz, works flawlessly when attached to laptop VGA port. 

More replies
Answer Match 58.8%

Hi guys,
I have a real problem. I turned on the pc the other day and the monitor light is blinking but will not display. It is a Samsung SyncMaster 740N. the Menu button brings up a popup on screen that says TEST GOOD and the disc drive wont open on the CPU. There was a storm here the night before I found the prob but I had turned the PC off at the wall and there is a surge protector on the whole house. I tried to google solutions but people with similar issues said they had already checked Ram and such before asking and I don't know how to even do that. I am putting myself through uni and can't afford to get in anyone at the moment so was hoping like hell that someone could help me to do it myself.
Thanks if you are reading this, any ideas would be appreciated.
 

More replies
Answer Match 58.8%

Ok this one has me stumped. I have been using dual monitors for a couple years now on my work PC (MSI 5450, HP 6005 Pro MT) and when I left work on Friday 8/28 it was working perfectly.

Today I booted up my pc and the second montior (17" dell, my main is a 22" HP) is not displaying correctly. The windows are much larger and the taskbar is nearly off the screen. When I fullscreen a window I can see around 75% of the window.

I have tried changing the resolution to no avail. No matter what resolution I choose (1440x900 is what I have always used it on) the windows appear larger than the screen and I can only see 10% of the taskbar. It is as though my card believes it is a much larger screen than what it actually is.

I did upgrade the pc from 2gb to 4gb of ram before I left on Friday. I obviously had to disconnect all of the connections, but I did have it up and running before I left work and the screens worked fine.

Any ideas?

A:Incorrect display on 2nd monitor (used to work perfectly)

Playing with my ATI Catalyst control center I can adjust the image scale and size of my main monitor (the one that works fine) but I cannot change the image scale or size & location on my 2nd monitor (2nd monitor is DVI, main is VGA).

1 more replies
Answer Match 58.8%

Hi
My LG L1953TR monitor stopped working.
yesterday it worked just fine, but today, when i turned my computer on the monitor didn't work (even the little blue light at the lower right corner).
I've tried checking the electricity, but it looks fine.
Does it mean the monitor is dead, or there's still something i can try?
Thanks
 

A:LG 1953TR monitor wont work

What country are you in does the plug have a fuse in it?
 

1 more replies
Answer Match 58.8%

Hello,

Thank you so much in advance for any advice.

I am not sure if this is in the correct section of the forums, so apologies if it isnt! I have a GTX 660ti. When plugged into my 1080p television, it works perfectly. However, when I plug in my 17" dell flatpanel, it says "not supported" across the screen. Is my GPU too advanced for me to use a small monitor? I have tried changing my resolution much lower, then turning the pc off, then plugging in the 17", still not supported. Is there something I have to do in bios?

Help!
 

A:GPU wont work with small monitor?

hiya,start your PC tapping F8 to get into safe mode,once in safe mode go to start and type msconfig in the search box,click the boot tab and put a tick in the "Base Video" box and click OK.reboot and everything will be big because it is t its lowest resolution,from here you can adjust the screen resolution to what you want,remember to go back to msconfig and remove the tick from Base Video
 

2 more replies
Answer Match 58.8%

I have an NVIDIA GeForce 9800 GTX+ and two days ago my monitor stopped showing my normal resolution, if i go into the NVIDIA control panel, i select an option in resolution to "Show Resolutions not exposed by the display" and force it into 1680x1050 but when i play certain games which take the resolution of my monitor's settings, those games are messed up because it still only sees the.
"800x600, 1024x768, 1152x864, 1280x720, 1280x768, 1280x800, 1280x960, 1280x1024, 1360x768, 1600x900, 1600x1024, 1600x1200"

Which unless i force my my monitor in my NVIDIA panel to show more, it only shows this when i click for resolution.

I am running Vista 64.

ALSO

Another problem is i accidently set my 1st Monitor input to "out of range" and i do not own a P2 keyboard so i cannot go into safe mode to change the resolution back to something that shows something.

Is there a way to change the resolution while in windows, or start in safemode from windows? and how do i fix the first problem.
 

A:Monitor 1680x1050 Wont work.

7 more replies
Answer Match 58.8%

howdy

I have a HP Pavilion dv6 laptop. I have just reformatted and reinstalled Windows 7.

I have a BenQ monitor plugged into it via VGA and that used to work fine before.

Now ever since the system has been reinstalled the monitor wont work

thanks

A:Standalone monitor wont work

When you click the Detect button on Screen Resolution Tool, does it not find the display?

9 more replies
Answer Match 58.8%

I should probably start off with I do not know much about computers, so please bare with me and talk in simple people talk . Okay my problem is my mothers computer will not work. It boots up and the lights flash and seems to work but the monitor goes to stand by right off the bat and the keyboard lights up in the begining but then won't work either. I have plugged in another monitor and keyboard (that I know work) with the same problems. I took the battery (cmos?) out and put it back in (someone else recommended doing that) and it did not help any. Anyone have any ideas on what the problem can be? The computer was not a year old when this starting happening, if that helps.
 

A:Need help-monitor, keyboard wont work

11 more replies
Answer Match 58.8%

Hi
I thought my desk needed reorganising this morning, so I thought i'd switch the computer off (which was working just fine, totally 100% no problems at all). I unplugged everything at the back, whilst it was off so i didnt electricute myself obviously and then moved the tower into another section of my desk. When i plugged everything back into the back of the PC, including the monitor. I went to turn it on. I did, the power light came on, the fan started spinning and the cd drive lights started flashing. Sounds good. But as i looked to my monitor it just said "no signal 6-5-4-3-2-1"
It was working fine before. Ive checked that the cable is in correctly, Ive ensured its not bent or trapped anywhere and still the same problem. Ive even tried to move the monitor back to where it was originally! But that still didnt work?
Any suggestions what has happened?
 

A:My 2000 pc Monitor wont work...

10 more replies
Answer Match 58.8%

Hi, I have a Dell GX 260 pc. It has always worked fine, but has a tiny harddrive. With all the updates and the software I need the harddrive was becoming too full. I put a bigger harddrive in, but when I switched the computer on to put the new operating system on, the monitor (which has always worked) seems not to receive the signal. The light just stays orange. The computer is making all the right noises. I put the original harddrive back in, but still the monitor wont work. The monitor is a flat screen one which is alot newer than the pc. Any ideas on how to resolve this? It was working fine before.

A:Dell monitor wont work

check the cables internally and that you have not knocked anything by mistake as you added the harddrive

Also when you put the VGA cable back onto the PC - check to see if any pins are bent - very easy to bend a pin on those connectors and still connect and screw up

11 more replies
Answer Match 58.8%

Here is the new build:

ASRock A790GXH/128M AM2+ ATX Phenom II ready
Asus Radeon HD 4890 1GB GDDR5
Corsair 650W
Samsung 22" Wide Syncmaster T220
AMD Phenom? II X3 720 Black Edition
Corsair Dominator TWIN2X PC8500 4GB DDR2

Unfortunately it doesn't work.

Well, everything seems to fire up but my monitor wont come out of standby.

What could be the problem?

Both 8pin and 24pin is connected to the motherboard. I have tried to connect the monitor to both the onboard GPU and the ATI 4890 GPU with wvery cable possible.. but with no result..

Also, I have gone through a checklist I found on another webpage and EVERYTHING seems to be installed correctly.


I get the following series of beep codes;

1 short beep then a long break

then 1 beep and two seconds after another 2 beeps.

then a little break on a few seconds

then another beep.


Any ideas??

Thanks


/David
 

A:Monitor wont work - new build

Matthew said:





Will your display work if you *remove* your 4890 and use the onboard graphics?Click to expand...

No Unfortunately not.
 

11 more replies
Answer Match 58.8%

Thanks in advance for any and all help!

I just received a new monitor (15" CRT) over the holidays. It was successfully recognized as a "generic plug n' play" and installed immediately. The previous monitor used was set @800x600 and appeared to fill the screen correctly.

However, the monitor, while installing without any difficulties, was only able to be sized to 640x480 and appears too large for the screen. when i manually set the "DISPLAY" settings to the old original 800x600, i get what appears to be the proper prospective on the screen, but i loose the toolbar at the bottom along with all the data underneath it (the tray, start tab, quick launch, address window, etc) and the overall picture, while similar to the original obtained with the older monitor, still "feels" peculiar-

The pix quality is super, and as i said, there's nothing wrong overall other than the size seems too large which presumably would have been corrected by a shift to 800x600- but at the expense of no toolbar and the info that goes along with it immediately underneath the toolbar (clock, tray, start tab,etc)

any help would be genuinely appreciated-

many thanks
webz
 

A:new monitor wont work with old settings....

11 more replies
Answer Match 58.8%

I recently brought a new pc and im haveing a problem with my screen and keybord not been dectected on first start it just stays black screen also my keybord wont light up i have tryed unpluging my hdmi cable and re plugging i have also changed the cable compleatly to a new cable still same problem happens unless i restart my pc arfter it firsts boots i cant see or type anything onley thing that seems to get power is my mouse dock all outher extrnal things comeing out back like my hdmi and keybord dont work unless im to restart then thay both power up like normal and pc runs fine all day long all my outher stuff is getting power due to i use it all day playing diablo 3 online so there is nothing major rong at all maby just something i dont have set right due to it been brand new and all everthing works 110% fine arfter my restart but not on first boot can someone here please point me in the right direction to fixing my problam any help will be grate thank you.

A:Monitor and keybord wont display unless i reboot arfter first boot

anyone at all can reply to this ?

1 more replies
Answer Match 58.38%

Hey everyone, I'm running a T450s Thinkpad on Win10. I have a very annoying issue; the function key for adjusting screen brightness doesn't work anymore. I guess it got 'broken' by Win10, but anyway, i can get it fixed. Tried installing new drivers for graphics and monitors but nothing helped so far... Grtz,Ewoud 

More replies
Answer Match 58.38%

Hello, I recently bought the Ultra Dock 90 for my T450s.  I have one external monitor currently connected through the dock.  When I push the power button on the docking station (laptop lid closed) to turn on the computer, the computer turns on, but the external monitor does not engage.  When I lift the laptop lid, there is no image on the laptop screen either.  The laptop is on, but does not respond to any key stokes on the actual laptop.  I then have to do a hard reboot using the power button on the laptop. If I initially power the laptop by lifting the lid and hitting the laptop power button, the compter boots and my external screen works.  I can then close the laptop lid and everything is fine. I know the power button on the dock should power the computer and external monitor on.  I am guessing there is a simple solution to resolve this, but I am not a computer person and need help. One thing to note - when I lift the lid after trying to power the laptop through the dock, I see that the Function Green Light is illuminated.  Not sure if this information is helpful in determining the problem. Please help! Peterrabbit33

More replies
Answer Match 58.38%

The monitor is a Decaview V382 (17") with on-screen controls via wheel-button. Turn the wheel > controls box. Keep turning and cycle through the control icons for width, height, brightness, etc. Press the button, activate an icon. PROBLEM: turning the wheel now cycles through only two of the icons ("trapezoid" and "pincushion"). There seems to be no way to reach the other icons.

This problem appeared when the monitor was connected to a new Dell running Windows XP (with 98se it had run normally). Do we need new drivers? If so, where can we get them?

TIA
 

A:monitor controls don't work; screen display is too small.

Hi stephen820!

I did a search and the only place I found a driver (I'm sure there are others) was at
http://www.driverguide.com/

You would have to join, just a couple of questions, check your e-mail, and you're in!
_
 

2 more replies
Answer Match 57.96%

well, I hope that subject heading was descriptive enough for all you fine folks.

To get down to the bones of the problem, I just built a new computer almost from the ground up, I salvaged only my hard drive and my processor from my old computer (A 7200 WD 200gig and a P4 3.0gHz HT, respectively) as the ram slots on my old motherboard decided to die. That, and it was kinda eh.

I upgraded to a NEW motherboard, a BioStar TSeries 945P v2.0 LGA775 with the 1066/800mHz FSB, got a new case with a 500watt power supply, new PNY DDR2 RAM, and hooked everything up properly. Alas, I plug the monitor into my video card(the board has no onboard video. The card is an ATI Radeon x600 from the old machine) and I get that little pop/crackle(it's a CRT) that tells me it feels somthing, but all it gives is the monitor test and a blinking green light when I turn the machine on. It's like it's not even plugged into anything.

I certainly hope this isn't an issue with the motherboard. I'm using the risers so I know it's not grounding to the plate, and it's literally brand new. I AM very green on building computers, though. So perhaps I messed something up. I can go into more detail if anyone would like.

Thanks in advance.
 

A:Built a new computer, monitor wont work.

Did you install a floppy drive? That would enable you to do a basic test with the hard drive disconnected and a boot to a floppy disc.
The pop/crackle could just be the monitor receiving power.
What do you mean by "monitor test"?
 

10 more replies
Answer Match 57.54%

Hello, I've had this problem with my laptop display for about half a year. When the laptop starts, the backlight turns on, but there is no display of Windows. When connected to an external monitor or projector, this displays the image with no problem. Thus, my question is: if my GPU and backlight are working, what component is causing the problem and how can I fix it? It is worth mentoning that sometimes on start up the display came back to life, and then if no shutdown or battery depletion occured, it would function normally. However, if the battery ran out, the problem came back (since I very often just put the laptop on sleep, this system functioned for a while...) Then, a couple of weeks ago this happened again, and the display hasn't worked since. I am now working with an external monitor.  Looking forward to your answers. Many thanks, Stefania

More replies
Answer Match 57.54%

I have a pc running windows 7 pro 64 bit, I received a update from windows and when the computer rebooted my monitor and key board will not work. I don't know what to do now, I can't even get it to boot in safe mode. Any Ideas?

Drummer77
 

A:windows7 update now my monitor and key board wont work.

Do you have the Windows disk. Boot from the disk and choose Repair.
 

3 more replies
Answer Match 57.54%

I've had an external monitor hooked up to my laptop for ages, showing duplicate screen
--same screen as laptop. Now suddently it went blank, The monitor works fine.

How do I get it to show the laptop screen again. I went to control pannel and display and properties and it seems to be monitor 2. If I click the extend desktop box, I get my screensaver on the external but nothing else-- it doesn't change when my laptop display does.

I could really use the monitor back. Any help would be welcome.

Thanks in advance
 

A:external monitor wont work with laptop anymore

6 more replies
Answer Match 57.54%

I have a 20? gateway 900G monitor. It was working fine for the 3 years I have had it. Then randomly today I restarted my computer and it wouldn?t work. I boot in safe mode and it works fine. Just when I get past the windows loading screen it then tells me that I have no signal. This happens in both XP and Vista. Linux runs fine still. The computer tells me it cannot find a monitor plugged in at all. The video card I have is a two DVI port X1650 pro. I used a DVI to VGA converter and connected a second VGA monitor to the second port and Windows boots just fine in that monitor but the other one once again went blank past the boot screen. I have no idea why my monitor won?t work. My computer is a 3.4 GHZ Pentium 4 with 3 gigs of ram.
 

A:Monitor wont work anymore aftor booting

Boot into the Safe Mode and select VGA mode... Restart the system
 

1 more replies
Answer Match 57.54%

My computer has been acting weird the last 3 days... random restarts... even before windows is booted it has restarted on me... and now when i try to boot it upmy monitor is not recognized...and believe me its not themonitor... ive checked anyways helllllllllp meeeeeeeeeeeeeeeeeeeeee
 

A:Computer spontanious restarted now monitor wont work

I believe you have a faulty power supply.
 

3 more replies
Answer Match 56.7%

The screen on my new laptop has gone blank on starting up, it shows nothing, i tried a hard reset which didn't fix. The external monitor won't display anything.
It's a HP envy 15-j112tx running windows 8. With a hdmi connection i tried to connect to an external monitor. The monitor was previously using vga to a desktop, i unplugged that and connected my dvi cable to the dvi port. The monitor says check video connection then goes to sleep. I connected the cables with the laptop turned off and again with the laptop already on. The monitor still says check video connection. The connection is secure, it is a new cord. I pressed the F4 button to switch between screens and waited inbetween presses but still nothing.

It is still under warranty. I disabled the nvidia graphics card a few days ago to try n save on power usage, as it also has an intel graphics card. It has worked fine for a few days since i did that.
Now that i've powered it on/off about 5 times the hard drive stops whirring after about a minute, yet the power button light remains on. It no longer turns off when i hold power for even a minute. I dont want to kill the thing.

Can anyone help me, i can't find an answer in previous threads.

A:External monitor wont work to fix blank screen HP envy

I have the same issue on my Envy-1130LA, white screen after power up and the external monitor doesn't work.

I bought a new flex cable to test if it works.

Are you already repaired your laptop? Please share your experience.

2 more replies
Answer Match 54.18%

Went to device mgr and noticed that i had a yellow ! mark at my MINI PORT ADAPTER # 2 i tried to update driver with no luck. I went to Microsoft knolage base and could not find anything helpfull may be i missed something?Running Windows XP HOME with service pack 2.Any help on finding driver for my PBLM?
 

More replies
Answer Match 53.76%

Has anyone had any issues with the Precision 7510 only outputting through one DisplayPort output on the E-Port Plus Advanced Port Replicator?Our organization recently started to introduce Precision 7510 units to our employees, and we're finding that they will only output to one single monitor connected via DisplayPort through the E-Port Plus Advanced Port Replicators - even though there are two monitors connected into the two DisplayPort outputs on the E-Port Plus APR. If the monitors are connected via DVI, the Precision 7510 is able to output to both of them through the E-Port Plus APR. We have tried Precision M4800, Latitude E7450, and Latitude E7470 units in these E-Port Plus APR's with two monitors connected into the two DisplayPort outputs - and they all work correctly.The Precision 7510 units have the NVIDIA Quadro M1000M video cards, and the E-Port Plus APR's are connected to either a pair of P2417 monitors or a pair of U2414 monitors.

More replies
Answer Match 53.76%

I have been having issues with hanging at the boot screen lately and decided to have a look see in my device manager. There is a yellow exclamation point next to wan mini port. When I open it it says Wan mini port (atw),network adapter, manufacturer, American online, then it goes on to says NDIS.VxD,NTKERN. VxD device loader could not be loaded for this device, code 2.

I don't use American online, we do have AIM instant messenger. I did tryy to update the driver, but it couldn't find it.

There are no check marks in the boxes under Device usage.
Any ideas! Thanks!
 

A:Yellow ! under Wan mini port!!!!

16 more replies
Answer Match 53.34%

I have dual monitors......my primary display monitor is a Chimei CMV223D
My secondary display monitor is an Acer AL1916W.

My graphics card is an HD ATI Radeon 5800.

PROBLEM:

My primary display monitor which usually has a display resolution of 1680x1050 is currently stuck on 640x480 and in the property settings it won't let me change the resolution. The cable running from the Graphics card is an HDMI cable with a HDMI/DVI converter. I have also tried using the DVI port of the video card to the DVI port of the PC which comes up with same problem. Using a DVI/VGA converter and a VGA cable the VGA port on the monitor works fine!!! SOOOO long story short there is definitely something going on with the monitors DVI port.........

This randomly occurred overnight and is driving me insane to know what I need to fix. I have used different cables and to no such luck. My secondary monitor is just humming away just fine! But I really need my primary display.

I've uninstalled and reinstalled video drivers for the graphics card which is the Catalyst control centre suite and all monitor drivers appear to be up to date.

WHY oh why is my monitor locked at this resolution!!??? How to fix please help!!!

A:DVI port on monitor is stuck res of 640x480 VGA port works fine

Never mind!!!!

SOLVED CHECK THIS!!!!!

Force DVI/HDMI resolutions and refresh rates

1 more replies
Answer Match 52.92%

Is there a way to make the USB Type-C port on the VN7-572G a display port? Like downloadable drivers?

More replies
Answer Match 52.92%

Is there a way to make the USB Type-C port on the VN7-572G a display port? Like downloadable drivers?

A:VN7-572G USB Type-C port as a display port

Also curious about the answer to this. Did you try it out by any chance?

6 more replies
Answer Match 52.92%

Hi, im fixing a computer with a broken keyboard port. The plastic conector is missing. Ive tried to weld wires to the mother and conected them to another plastic conector, but it doesnt work.
The machine has a pci usb card and a usb keyboard to work with windows.
All I realy need to do is "Press F2 to load bios defaults".

Is there any way of having the bios load the defaults whithout pressing any key?

Thanks a lot.

PomexAr

PD:The usb keyboard dosnt work for the bios.
 

A:Broken mini din keyboard port

Clearing the BIOS will load the factory defaults. There is a jumper for this on the motherboard.
 

1 more replies
Answer Match 52.92%

None of my games will work. I took some advice of a forum because I couldnt get Perfect World to work and changed something in the registry to do with the port. Now no game will work and i would change it back but i dont know what it was previously.
My system restores wont work, wont even undo, and theres only one days worth there now. I dont know how to do a utilities reg scan which I think may be what I need to do, I dont know if its in my pc or on my XP disk. I cant use the disk because I dont know how to find my product code and the person I bought it off has gone to Cyprus .

I've done a Drwebcureit but really I need instructions for a 2 year old and I think this has happened since my last one. I had a Win32 Trojan in the other day and Vundo got rid of it I think, maybe its got something to do with that, maybe its still lurking around. Ive done a Combofix amd this was at the top - WARNING -THIS MACHINE DOES NOT HAVE THE RECOVERY CONSOLE INSTALLED. If anyone can help me, you would save my life, its driving me mad now.

~~x~~
 

More replies
Answer Match 52.5%

I cannot access internet on wirelss linksys WRT54G router. my control panel under network adapters is telling me the mini port above cannot start. I have tried down loading a microsoft fix but it did not work. I've googled the problem and have seen where numerous other people have same issue. techs are coming back with solutions that are either not working or are very complex to me. I dont feel too comfortable tyring to unistall other programs or hardware to try to fix this connection. is this a Vista issue or is this an issue with my Linksys hardware? Do I need to bring my computer into a tech to have them attempt to fix this or is my compter and this vista software reaching the end of its useful life?

A:Microsoft Tun Mini Port adapter 2 problem

Hi -

What does the Device manager say? Check for red/ yellow flags -
START | type devmgmt.msc

Regards. . .

jcgriff2

.

3 more replies