Tech Problem Aggregator

320-1030

Q: 320-1030

Greetings, I was wondering what to look for if I wanted to upgrade my 320-1030 in terms of a motherboard and CPU? I was contemplating upgrading the CPU to an A8-3820 on the existing board, but I now am wondering if it is possible to move to a faster CPU (which I am assuming would require a new motherboard if that is possible).

More replies
Answer Match 44.52%

Does anyone know where I can order an usb drive to get my HP Mini 1030NR restored to factory setting? Thnx 

A:Hp Mini 1030 NR

hi. did you ever get the recovery disks? I am in the exact same situation and cannot for the life of me find the recovery image anywhere!

1 more replies
Answer Match 44.52%

On the hp website it stated that the i7 2600 is supported, now that I tried it on boot the screen says unsupported cpu installed and it justs shuts down, I already upgraded the bios any suggestions that I can do to resolve this? thanks in advance

A:520-1030 cpu upgrade

An Intel Core i7 2600(95W TDP) and 2600s (64W TDP) is supposed to be supported. Are you certain that what you installed is not an Intel Core i7 2600k instead?

9 more replies
Answer Match 44.52%

Hello, I've been saving up for some time now and I would like to build a good gamin computer. I know I have the right money to build a solid performing one, one that can run games on high quality too. The only problem is, I don't know which parts to buy. I do know how to build it however. I would like some help selecting parts from you. One final point, I will want it for doing other stuff, not demanding just practical uses like searching and making documents etc. Thanks so much!
 

A:New PC Build - £620 ($1030)

You need to provide a little more info;
1 Do you want amd or intel?
2 Do you have any parts you are going to reuse ie case, keyboard/mouse, optical drive, etc?
3 Are you including the cost of windows for your new build?
 

2 more replies
Answer Match 44.52%

One of our users just lost control of her PC. Someone remotely took control of her mouse. The only unusual activity we have seen thus far is Port 1030 called iad1. Has anyone seen this?
 

A:iad1 on TCP 1030

Hi nmorrisonaz,

Not sure If any malware can do that.

But please do this. Click here to download Hijack This. Run Hijackthis.
Click the "Scan" button when the scan is finished the scan button will become "Save Log" click that and save the log.

Go to where you saved the log and click on "Edit > Select All" then click on "Edit > Copy" then Paste the log back here in a reply.

DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required. Someone here will be glad to advise you on what to fix.

*Note: When you download Hijack This Do Not download it to a temp folder or to the desktop. Create a permanent folder somewhere like in My Documents and name it Hijack This and put it in that folder.
 

3 more replies
Answer Match 44.1%

For this type what can I upgrade my processor to?  I believe it's only a 4GB as well. I need more RAM and processing power. thank you

A:I have an HP TOUCHSMART 320 PC MODEL 320-1030 looking to upg...

Hi, Yes. Please check 2 sections Processor upgrade informationMemory upgrade informationon the following link:     http://support.hp.com/au-en/document/c03026602 Regards.

1 more replies
Answer Match 44.1%

   Information
Foxits free PDF Reader has been updated to 3.1.3.1030. You can get it here.
Foxit Software

A:Foxit PDF Reader 3.1.3.1030 available

+1 for Foxit Reader (especially those of us with a distaste for Acrobat).

2 more replies
Answer Match 44.1%

I was trying to speed up a Touchsmart 600   Info below:
Model #: 600-1000t
Product #: AW023AV-ABA
[personal information removed]
Software Build #: 94NAv6PcA5
Service ID #: 011-610
PCBRAND: Pavilion
 
I search HP support and it says :   
Memory: DDR3 SO-DIMM (200-pin)
Tyoe: PC3-10600 (DDR3-1333 MHz)
 
Of course when I google "DDR3 SO-DIMM (200-Pin) PC3-10600 i get all types of hits for HP Touchsmarts,  when I remove the (200-pin) from the search criteria i get all types of 204-pin RAM Sticks. 
 
I would tend to beleive that HP's telephone support technicians in what sounds like india don't know and they're looking it up in their data-bases.  I believe the HP databases to be incorrect.  The best option is to remove a stick and see exactly what the label on the Memory Stick says, and then buy bigger sticks of the same RAM as in the computer.  I have 3 sticks to try,   DDR3 - 1066 MHz,  DDR3 - 1333MHz  & DDR3-1600MHz.  i think it's the

A:Touchsmart 320-1030: Is it 200 pin SO-DIMM or 204?!?!? Yet m...

Spoiler (Highlight to read)  I think I'm going to go with the 204-Pin.   I think the printed HP documentation is a typo and they really intended to type 204-pin.   I don't think it's my memory anyway because the usage rarely goes over 25% usage of physical memory.  i think the server i'm accessing is running slow... 

1 more replies
Answer Match 44.1%

So I want to upgrade my RAM on the 320-1030. The specs page says "Two 200-pin DDR3 SO-DIMM sockets".It also says "Supports DDR3 SO-DIMMs" and specifically "PC3 10600 (1333 MHz)" and "PC3 12800 (1600 MHz)". Yet more HP contradictions (lies?)1) The parts page lists the item pre-installed is 572293-D88, a 204-pin item. See here, here, here, here, and here.2) Using the automated systems for major RAM sellers all indicate 204-pin RAM will work on the 320-1030. Crucial.comNewegg.com What gives?!? 

A:Touchsmart 320-1030: Is it 200 pin SO-DIMM or 204?!?!? Yet m...

Hi: I do not believe there is any such thing as a 200 Pin DDR3 SODIMM, so HP's reference to that is incorrect. A DDR2 SODIMM memory module is 200 pin, and a DDR3 SODIMM is 204 pin. http://en.wikipedia.org/wiki/SO-DIMM Paul

9 more replies
Answer Match 44.1%

v6.2.0.1030 Apr 13, 2015

Fixed: Bug fixes
http://www.360totalsecurity.com/en/version/ts/

Download:
http://free.360totalsecurity.com/totalsecurity/360TS_Setup_6.2.0.1030.exe
 

More replies
Answer Match 43.68%

Hello everyone, I have been trying to get my wireless working on my Dell Inspiron n5110 on Windows 7 64 bit to no avail. In device manager I have the error "code 10 this device cannot start" I have tried almost everything so far. Reinstalled drivers multiple times, with multiple versions. I have replaced the adapter even though I knew it was a software problem because the wireless works on a live boot Ubuntu and as a last resort I have reinstalled Windows and installed all the proper drivers but still nothing. Any thoughts on what I could be missing or some suggestions?

A:Centrino-n 1030 driver issues

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

8 more replies
Answer Match 43.68%

Hello, we have recently purchased several HP Elitebook 1030 G1 notebooks. These come with Windows 10 out of the box, and no discs at all. HP seem to offer a Windows 7 recovery disc via drivers & downloads but this only seems to be for drivers and applications post-Windows 7 install. We still use Windows 7 (Enterprise x64) deploying via SCCM. As the laptop doesn't have a LAN port HP support suggested getting an HP USB-C to Ethernet adapter, but this doesn't seem to help with PXE boot. So moving onwards, I then attempted to do a manual install of Windows 7 x64 via USB. Initially it didn't even boot without turning off secure boot and turning on legacy boot. As the laptop has an M.2 ssd it is not even found by the setup process. I have now gone through adding sata and usb3 drivers via dism to boot+install wim's and also an MS hotfix for NVMe support (https://support.microsoft.com/en-us/kb/2990941). Unfortunately after all this it is still not able to see the hard drive. Unless I am going blind I cannot see any information about this on HP Support. Has anyone done this on this model notebook or similar (ie M.2 ssd)? Thanks

More replies
Answer Match 43.68%

Is it just my imagination or has the attempts to begin communication on about ports 1025-1035 begun to rise?

Looking over data on this I really dont see its nominal importance other then the beginning of the road or bottom of the stairs to attempt throughput communication, if you will =)

Anyone else care to take a stab at this ?

-Z
 

A:Port 1030 Alerts, Give or Take

7 more replies
Answer Match 43.68%

I am totally obsessed with downloading music, but awhile ago I attemped to download an upgrade to the basic Kazaa system. Once I had fully downloaded the upgrade I went to click on Kazaa and a message popped up saying," You have uninstalled a part of Kazaa needed to run and to close and reinstall." (I believe it was called error 1030, I'm not positive though) Anyway, I uninstalled Kazaa and reinstalled several times and the same message keeps appearing.I checked to make sure I had all the needed componets to run Kazaa aswell. I can't figure out what to do. I tried other music sources but I can't find one I like as much as Kazaa. If you know what I should do please HELP!!
 

A:Kazaa Error 1030, any adivse?

What I would do is:

1. Use a spyware scanner to delete all the spyware that comes with the Kazaa download
2. uninstall Kazaa using the JV16 power tool
3. Do a file search for Kazaa and delete all of the files that are found.
4. Backup the registry
5. Use Jv16 power tool to clean the registry.
6. If you want to and are brave enough, do a manual search for useless Kazaa keys in the registry (be sure to have a backup if you do this)
Reinstall the latest Kazzaa with all of its Spyware. (Perhaps you might want to try Kazaa Lite)
 

2 more replies
Answer Match 43.68%

Hi, I hope someone out there can shed a little light on this situation as it's doing my nut in!

We have a network with 3 Windows 2003 servers and workstations all with XP. When the users log in a script runs which maps network drives and pushes printer connections etc. Also we have several group policies set which restrict pupils and staff in certain ways. Nothing drastic though. Just 'Cant see certain Control Pannel Items etc'.

Now all was working perfectly until a couple of weeks ago 2 staff members came to me and said "I can't get on the interenet or e-mail". I had a look and when they logged in on their normal computer it seemed to log in fine but then receieved a couple of "Cannot perform this action due to restrictions on effect on this computer" messages. This message also appears when they try to click on the Internet for example. On closer inspection it has run the scripts ok because I have the shared drives and printers. But the virus scanner which is sophos in our case hasn't loaded (it comes down from the server), also there is no All Programs in the start menu, or shut down.

If I log off and check the event viewer I have event 1030 there which refers to an error with group policy.

Now the most annoying problem is it appears completly random with it's timing. Usually a shut down and restart of the computer fixes it. Moving to another computer can also fix it. It dosent always do it on the same computers, other... Read more

More replies
Answer Match 43.68%

I just looking for information on how to install windows 10 on my Touchsmart 320-1030 PC. The PC is only 2-4-year-old and runs great. What steps do I need to take, in order to install windows 10 on this device?

More replies
Answer Match 43.68%

Hi, I hope someone out there can shed a little light on this situation as it's doing my nut in!

We have a network with 3 Windows 2003 servers and workstations all with XP. When the users log in a script runs which maps network drives and pushes printer connections etc. Also we have several group policies set which restrict pupils and staff in certain ways. Nothing drastic though. Just 'Cant see certain Control Pannel Items etc'.

Now all was working perfectly until a couple of weeks ago 2 staff members came to me and said "I can't get on the interenet or e-mail". I had a look and when they logged in on their normal computer it seemed to log in fine but then receieved a couple of "Cannot perform this action due to restrictions on effect on this computer" messages. This message also appears when they try to click on the Internet for example. On closer inspection it has run the scripts ok because I have the shared drives and printers. But the virus scanner which is sophos in our case hasn't loaded (it comes down from the server), also there is no All Programs in the start menu, or shut down.

If I log off and check the event viewer I have event 1030 there which refers to an error with group policy.

Now the most annoying problem is it appears completly random with it's timing. Usually a shut down and restart of the computer fixes it. Moving to another computer can also fix it. It dosent always do it on the same computers, other peolpe can log on to ... Read more

More replies
Answer Match 43.26%

The video card in my Pavilion h8-1030 died and I need to find a replacement. If possible, I'd like to upgrade the card at the same time to the best possible card that would work on this system, within on total $350 budget. Being overly optimistic and with a big dose of wishful thinking I had actually ordered a MSO GeForce GTX 970 , but before it arrived I read that it will not work as teh BIOS version cannot be upgraded to version 8. So I am sending that card back as soon as it arrives. I am unable to buy a whole new computer at this time, so I'm going to have to settle for a new GPU (and PSU if needed). I don't game but I do use Adobe CC 2015 applications, mostly photoshop adn lightroom but ocasionally also premiere and in-design. Before failing the old card was struggling with certian photoshop functions and video editing was slow and frustrating. This is why I would like to upgrade the GPU. Motherboard H-RS880-uATX (Aloe)Processor AMD Phenom II X6 1090TMemory 10 GBBIOS, American Megatrends Inc. 6.12 Is there a list of compatible GPUs? Thank you ever so much for your help.

A:what Video Card upgrades are possible for Pavilion h8-1030?

Hi, The version 6 BIOS in your PC is not compatible with many of the newer graphics cards.  You will need to use an older legacy graphics card in your PC.  The processor and memory in your PC are more than sufficient for most use. I suggest that you look for a NVIDIA GTX 660 for around $226 new on Amazon. You can find the GTX 660 on eBAY for a lot less.  You will also need to replace the power supply. The Corsair CX650m should be around $55 after rebate.    

2 more replies
Answer Match 43.26%

I'm trying to replace a faulty wireless card and I can't figure out for the life of me where to order a new one. 'HP Part Surfer' doesn't return anything. I'm also not entirely sure where the part number on the wireless card is, all I can really see that might be it is a 'PNOP' number.Thanks in advance!

A:Ordering a Intel Centrino Wireless-N 1030

Dear Customer,  These are the Wireless cards supported by the unit. Intel Centrino Advanced-N 6230631956-001.Intel Centrino Wireless-N 1000593530-001.Intel Centrino Wireless-N + WiMAX 6150633817-001.  Also please check the below link having the complete guide of your unit.http://h10032.www1.hp.com/ctg/Manual/c02842252  I  recommend you to Contact HP Support over the Phone for further assistance.  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

1 more replies
Answer Match 43.26%

I noticed my wireless 1030 is acting strange after getting BSOD(not the cause of Wireless but it was solved)and now I'm experiencing some problems, here are the issue. I'm worried if it is the NIC card

1.like it takes a while to connect to a certain webpage then whenI looked up on Event viewer it stated in the lines of Google too long to respond DNS

2. sometimes the wireless would switch off by itself and when I try to reconnect to my home router it says "Cannot find my router* yet I can see it shows my wireless router is available then when I look up event viewer it states " NETBIOS over TCPIP has entered Stop state".

I would have to click on

*Troubleshoot Problems which then would let me reconnect back in the router*

3. I have been getting this new event viewer error 5060:
The description for Event ID 5060 from source NETwNs64 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\NDMP32
Intel(R) Centrino(R) Wireless-N 1030
I can see my network information by typing ipconfig/all BUT recently I performed a Intel? PROSet/Wireless Software Manual Diagnostics Tool and it failed on "Radio ON test" yet my wifi switch was ON. I... Read more

A:I'm having wireless Issues with the Intel 1030,Turning off by itself

It almost sounds like a nic driver issue. Have you updated it recently? Try to update, or roll-back if update did not work.
Replacing your nic should not be to hard depending on your device. Usually the nic is the easiest of the add-on boards to get to. But, I really don't think it's the nic. Were you changing, installing, updating anything with your hardware, operating system when this happened? If driver update/rollback doesn't work, try a system restore if feasible.

4 more replies
Answer Match 43.26%

hi!

hello, first off i have scanned with adaware pro se, spybot, and h2, also mcafee antivirus and a couple of online scanners--this is what remains

i have some pesky files burrowed into my pooter, i am pretty sure the files in the temp folder are bad....but when i search for the executable, all i can find are prefetch files....i think the prefetch files are generating the temp files...

i have used msconfig to stop some files from statring,and that has stopped an error screen that displayed this message at start up everytime:

rundll egdhtml-1030 dll error

i reactivated them in msconfig for this logfile...

also- whenever i turn on the computer, it frezzes up after booting to windows, i found that killing all the rundll32.exe files make it able to run again!!!!!!

so they must be bad, too...

here is my log, thank you very much for any help!!

Logfile of HijackThis v1.99.0
Scan saved at 3:36:10 PM, on 1/30/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\McAfee\McAfee Privacy Service\GUARDDOG.EXE
C:\WINDOWS\system32\gearsec.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MPFSERVICE.exe
C:\PROGRA~1\McAfee\SPA... Read more

A:egdhtml-1030.dll error+rundll32.exe*logfile inc.*

Please print out or copy this page to Notepad. Make sure to work through the fixes in the exact order it is mentioned below. If there's anything that you don't understand, ask your question(s) before proceeding with the fixes. You should not have any open browsers when you are following the procedures below.

Go to My Computer->Tools/View->Folder Options->View tab and make sure that 'Show hidden files and folders' (or 'Show all files') is enabled. Also make sure that Display the contents of System Folders' is checked. Windows XP's search feature is a little different. When you click on 'All files and folders' on the left pane, click on the 'More advanced options' at the bottom. Make sure that Search system folders, Search hidden files and folders, and Search subfolders are checked.

For the options that you checked/enabled earlier, you may uncheck them after your log is clean. If we ask you to fix a program that you use or want to keep, please post back saying that (we don't know every program that exists, so we may tell you to delete a program that we think is bad to keep).

Turn off system restore by right clicking on My Computer and go to Properties->System Restore and check the box for Turn off System Restore. Click Apply and then OK. Restart your computer. After we are finished with your log file and verified that it's clean, you may turn it back on and create a new restore point.

Download AboutBuster and unzip it to a folder on your the D... Read more

4 more replies
Answer Match 43.26%

Hi,

Please guide me how I can get a driver for my brother printer HL -1030 for Windows 7. I called Brother office in Canada and they say this printer is not compatible with Windows 7. Is there any other printer driver I can download and get my printer working.

Thanks in advance.

Wonderdollar

A:Brother HL-1030 printer driver for Windows 7

You should be able to use the XP drivers and install them in compatibilty mode.

Here's a link to the XP Home/Pro 32-Bit Drivers
Brother Solutions Center: HL-1030: Downloads: Others

To run the installer in compatibility mode:

Right Click Installer > Properties > Compatibility > Select the OS you want. (In this case, XP)

9 more replies
Answer Match 43.26%

Hello, i have an HP Touchsmart 520-1030, and i wish to upgrade it with i3-3225 processor that i own. Tried to replace it with mine i3-2120, but pc just does not boot. Any way to upgrade bios to support ivy bridge processors? For now i have latest bios 7.12. I see the only difference between models that support ivy and not, is MB name Lavaca3SB[supports ivy] and LavacaSB[does not]. Is it the same mb and i can install Lavaca3SB's bios to mine LavacaSB board or this will not work that way?

More replies
Answer Match 43.26%

These event just started appearing a day or two ago, but they continue to repeat every 5 minutes:

Event 1030:
Windows cannot query for the list of Group Policy objects. Check the event log for possible messages previously logged by the policy engine that describes the reason for this.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Event 1058:
Windows cannot access the file gpt.ini for GPO CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=bbpi-pdc,DC=billsblue,DC=com. The file must be present at the location <\\bbpi-pdc.billsblue.com\sysvol\bbpi-pdc.billsblue.com\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini>. (Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator. ). Group Policy processing aborted.
They occur exactly every five minutes, and always in this order. I searched for the gpt.ini file it's looking for and found it.

I don't really have any group policies in place, just basic users and computers. Nothing fancy. And I'm afraid I don't quite understand AD enough to just 'experiment' until I make these error go away.

Any ideas and/or guidance would be welcome.... thanks
 

A:Event 1030 & 1058, repeating. Guidance?

One possibility:
As per Microsoft: "This behavior may occur if the following conditions are true: your Windows XP-based computer is a member of a domain, and the Microsoft Distributed File System (DFS) client is turned off (disabled). To resolve this issue, turn on (enable) the DFS client". See M314494 to find out how to do this. Also check M810907 for a hotfix.

Other possibilities:
http://www.eventid.net/display.asp?eventid=1030&eventno=1542&source=Userenv&phase=1
 

3 more replies
Answer Match 43.26%

First up, hello everyone.

I have XP computers connected to a SBS2003R2 domain that is posting 1030 Userenv errors in the eventlog. I've not checked them all but three of them definitely are, so we can presume they all are.

Through Userenv.log, I've wiggled it down to two variants of:

USERENV(314.480) 21:50:37:892 ProcessGPO: CheckFilterAcess failed for <CN={C94DA5DA-A892-44ED-B77D-618A143ED5CC},CN=Policies,CN=System,DC=[domainname],DC=local>. Filter not found
Click to expand...

Followed by many of the following that correlate with the eventlog errors:

USERENV(318.868) 09:47:24:929 ProcessGPOs: GetGPOInfo failed.
Click to expand...

My question is - whereto from here? OUs, GPO and the such is on the edge of my knowledge. It seems that if I can find what GPO is failing, I'm there.
 

A:Eventlog 1030 and userenv GetGPOInfo failed

I would suggest since you are apparently having troubles with a Small Business Server that you ask to have this post moved to the Networking forum here at TSG. You will get a better response there. You can do this by clicking the little triangle at the top right corner of the window and ask a moderator to please move this thread to that forum
 

2 more replies
Answer Match 42.42%

I used a copy of windows 7 professional to wipe the system because I was giving it away. I have the operating system up but can not access the network card to access the internet. I've downloaded the drivers on the software page but get the message that the file is not compatible with the system. I see the recovery disk I can order, but was hoping to find an image of the recovery disk that I can download and burn to a disk myself. Overnight ordering still has a statement about it taking 2 days to process first. Is there another area online that I can get the recovery disk downloaded? Serial number: 3CR2160C7B Thanks in advance.  

More replies
Answer Match 42.42%

After recovering this system, I went to the HP site to download drivers for it.  The message I received is that there are no drivers for this model running that OS.  I am confused since the original OS on this system was 7.

A:How to download drivers for Model 320-1030 running Windows 7

@BocaRay?, welcome to the forum. Here are the Software and Drivers Downloads for the computer for Win 7.  If you haven't done so, you should run HP and Windows Updates, also.  You should use HP Support Assistant to check for HP updates.  The latest version of HPSA is here. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

1 more replies
Answer Match 42.42%

 Hello, Wireless functionality was lost on my HP Pavillion dv7t-6c00 laptop when I upgraded to Windows 10. Here's what I have in my laptop now: Manufacturer: Intel CorporationDescription: Intel(R) Centrino(R) Wireless-N 1030Driver version: 15.11.0.8 I've read some support threads on this topic and it seems that this wireless card is not supported by Intel in Windows 10. I've also read that one suggestion is to replace the wireless card with an Intel Advanced-N 6230 wireless card. I tried to replace the wireless card prior to upgrading to Windows 10 with an Intel Advanced-N 6230 wireless card but the wireless card I purchased seemed incompatible with the laptop, as it gave me a Halted screen when I started up the laptop.  So my frustration is I would gladly and easily replace the wireless card but I can't keep purchasing cards that are incompatible with the laptop. What are my options?  Is there a specific/guarenteed HP Laptop compatible part number that I can purchase?   Even better, is there a link to where I can purchase a card that will definitely work? Thank you ver much,Chris  

More replies
Answer Match 42.42%

Hello,

I'm having a strange problem. Intel released new drivers to update from version 15.11 to 16.11. I downloaded them from Intel website, ran install, success. When I go into Device Manager to check on the driver version, I see it is still 15.11. I have tried a number of things, including deleting the drivers from the Device Manager and running the install again. However, in this case Windows 8 automatically installs even older drivers, version 14, dated 2011. I'd like to try the new drivers because it takes very long for the net to comeback after I wake up my laptop. Version 15.11 was installed by Windows Update, those drivers are dated January 2014.

A:Drivers update for Intel Centrino Wireless-N 1030

Just disable allowing Windows to automatically install drivers.

8 more replies
Answer Match 42.42%

I am running a Vista x 64 client with a SBS2003 server. There are now real critical issues, but there are some logon and logoff anomalies.

I consistently receive events 1030 and 40961 at Logon. I will post details in subsequent entries.

Also, Logoff usually takes a very long time (like more than 15 minutes).

A:Event ID 1030 and 40961 at Logon, Slow Logoff

Example event 40961:

The Security System could not establish a secured connection with the server LDAP/sbsserv.Dimond.local/Dimond.local@DIMOND.LOCAL. No authentication protocol was available.

- System

- Provider

[ Name] LsaSrv

- EventID 40961

[ Qualifiers] 32768

Level 3

Task 3

Keywords 0x80000000000000

- TimeCreated

[ SystemTime] 2010-10-27T23:19:24.000Z

EventRecordID 156192

Channel System

Computer IPS-091.Dimond.local

Security


- EventData

LDAP/sbsserv.Dimond.local/Dimond.local@DIMOND.LOCAL
03030980

3 more replies
Answer Match 42.42%

This card supports 802.11n. Obviously... it's right in the name, plus device manager>network adapters>Intel Centrino>Advanced tab clearly shows n enabled.

But can anyone take a second to tell me, if you know, why when I run the command netsh wlan show drivers, "radio types supported" shows only b and g, and NOT 802.11n ??? Confusing to me.

A:Intel Centrino Wireless-N 1030, CMD prompt question

that is odd but if your connected using N and your drivers are up to date i wouldn't worry about it.

1 more replies
Answer Match 42.42%

I need to upgrade my wifi card from the intel Centrino Wireless-N 1030.  I checked the manual and it says a cards i can use, but then i see that card won't work on hp.  Can someone please tell me the exact card I can use that is an upgrade from the 1030 as all that wifi card has done is give me issues.  My laptop is a hp pavilion dv7-6c60us.  The OS is windows 7 64bit.  This whitelist crap makes everything a pain in the butt!!! 

A:I need to replace my intel Centrino Wireless-N 1030 wifi car...

Hi, Your machine was built before second half of 2014 therefore the chance to upgrade wireless card is very slim to none. There is a list on pp 6 and 7 of the following manual:           http://h10032.www1.hp.com/ctg/Manual/c03099448.pdf You can use USB wireless adapter, this will cost you one USB port       http://www.officeworks.com.au/shop/officeworks/c/technology/networking/wireless-usb-adapters     (Note: much cheaper from other countries). Regards.

1 more replies
Answer Match 42.42%

I have a relatively new (few months) laptop of my own running Win7 x64 with an "Intel Centrino Wireless-N 1030" wireless network adapter. For some reason, I have serious problems connecting to most wireless networks. On my home network there are rarely problems, but when I attempt to any other network (college, or public hotspot, or neighbor's open wireless) there are often issues.

By "issues" I mean: when I first attempt to connect to the network in question, I'm usually able to connect to the first few sites I try to access, but usually after a second or a minute or a few minutes of normal connectivity, I'm suddenly unable to access anything. The browser's response is that DNS lookup has failed; when I record an IP address (via ping-command prompt) and type it in manually after this point, the browser's response is that "##.##..." is taking too long to respond, etc..." No other program is able to connect either. I have tried setting different DNS servers but it has had no visible effect. At this point, the only thing I can do to reconnect is to either wait a long time for the connection to reestablish itself (which can take an hour or more and isn't guaranteed) or to go to Device Manager and disable and reenable the wireless adapter, which then *sometimes* allows me to reconnect for a few seconds or a minute or an hour before connectivity breaks again. When the connection fails, Windows displays the computer ... Read more

A:Unreliable connectivity - Intel Centrino Wireless-N 1030

I had the same issue too. My GF's laptop has a 1030 wireless NIC and it had all sorts of issues connecting to the APs in my house. It would work fine with her Linksys wireless router and my Sprint MiFi. But had connectivity/performance problems when connecting to either of my Netgear APs (WG102 and WNDAP350) along with my PC W 620 wireless controller with AP 105 and AP 125 access points. Updating the drivers helped the problem somewhat, but we were still experiencing dropped packets or extremely high latency when connected. Upon a suggestion from one of my coworkers, I tried adjusting the performance/power settings in Windows and that seemed to have fixed the problem. The laptop has been running fine ever since.
 

1 more replies
Answer Match 42.42%

Hi!!

I get an error message on 2 machines in my domain.

domain: 3 windows 2003 servers.
1 server: DC
2/3 servers: on this I get the error. the both servers are set as member servers.
how I can fix the error on the both machines?

Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1030
Date: 22.09.2003
Time: 10:13:48
User: GICIOLAND\gicio
Computer: JAMESBROWN
Description:
Windows cannot query for the list of Group Policy objects. Check the event log for possible messages previously logged by the policy engine that describes the reason for this.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

regards,
gicio
 

More replies
Answer Match 42.42%

Hello,

I sent my computer in for repairs a while back and now the wireless card won't work. It can't find any signals unless I plug in the one from my desktop. I went to computer/properties/device manager and saw that the wireless card (Intel (R) Centrino (R) Wireless-N 1030) has a yellow "!" next to it. The properties tab says, "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)".

I have tried searching for new drivers automatically but it says they are up to date. I downloaded the latest drivers directly from Intel and tried to manually update them but it said that the drivers are up to date again. This problem occurs whenever I update my computer. I did a system restore and it worked fine for about a month, but once it updated it did the same thing again. There is no restore point to go to this time, so I'm stuck.

Anyone know what I should do?

Thanks

More replies
Answer Match 42.42%

Can some Tech Guru tell me if its safe to use the system backup cleaner.? It found 1.8 GB to be cleaned. What to do..???
 

A:Quihoo 360 Total Security 6.2.0.1030 Sys Backup Cleaner

yes it is safe.

i removed 6 GB system backup files myself.
 

9 more replies
Answer Match 42%

Hi,

Application event viewer notification keep showing this error. Kindly advise.

Event ID: 1030
Source : Userenv
User NT Authority\System
Decription: Windows cannot query for the list of group policy object. Check the event log for possible messages previously logged by the policy engine tha tdescribes the reason fo this

Event ID: 1030
Source : Userenv
User NT Authority\System
Description: Windows cannot access the file gpt.ini for GPO CN=(31B2F340-016D-11D2-945f-00c04FB84F9,CN=Policies,CN=System,DC=mscmsia,DC=com. hte file must be present at the location <\\mscmsia.com\sysvol\mscmsia.com\Policies\{31BF340-016D2-945F-00C04FB984F9}\gpt.ini>.(Access is denied). Grpoup Policy processing aborted.


Thank you.
 

More replies
Answer Match 42%

I turned on my computer today and the computer says Error: No boot disk has been detected or the disk has failed. What do I do to fix this.

More replies
Answer Match 38.22%

I saw some people having trouble with extremely slow wireless connections using an Intel Centrino Wireless n-1030 card. The original thread is closed, so the problem may already be solved, but if anyone is still experiencing this problem, here is what worked for me:

This NIC is a dual band card (802.11 + bluetooth), and with some routers having the bluetooth enabled really slowed down the 802.11n connection (it didn't seem to happen with my netgear router, but when I switched to linksys, WHAMMO!).

Anyway, when I disabled the Bluetooth adapter in Device Manager the problem was completely solved (uhhhh except I need to use a dongle to make my bluetooth mouse work now... small price to pay IMO)

Anyway, just thought I'd share my experience. Hope it can help someone.
 

More replies
Answer Match 30.66%

Currently Upgraded From Windows Xp to Vista 64Bit Currently Have sp2.

I did this as I bought this pc and wante'd to upgraded it.
After upgrading i have a folder called Windows.Old

I have currently delete every folder i can Except One " user Data "

Which contains To files

ЃϵϳЅЂϿϽϯІχϯπρϴϱЄϱЃϵϳЅ and

ЃϵϳЅЂϿϽϯІχϯπρЂϻϵЉЃϵϳЅ


Currently have Tried
Disk Clean Up = No Effect
Safe Mode Boot Up and Delete = Same error Code

I renamed the folder now to " lol " no specific reason to try and delete same error message.

" This is no longer Located in C:\Test. Verify The items location.
When tring to removed the selected " LOL " folder containng the two folders.

I did some research/ Alot of research and still have no effect please help me.

A:Currently Upgraded from Xp to Vista 64 Can't Delte Files ЃϵϳЅЂϿϽϯІχϯπρϴϱЄϱЃϵϳЅ

Hi and welcome to TSF this may help http://www.vista4beginners.com/Chang...take-ownership

4 more replies