Tech Problem Aggregator

Windows 10 volume control doesn't work

Q: Windows 10 volume control doesn't work

Hello

I installed windows 10 and i like it very much, except for one thing; i can't adjust my windows volume.
I had this problem before with previous windows but i could fix this to right click on the volume icon right below the the task bar and press playback devices. Here you swa to devices speakers what was set as default en digital output. nothing's change there very much but before i could fix the problem trought set the digital output device as default, but now nothing changed. I tryd to disableing the other devices i tryd to update the drivers, i cant change any thing in the driver settings what can help me.

I can adjust the volume at youtube its just the volume of windows i cant eather mute it.
i'm sorry for my bad english i hope i'm clearly enough and hope some one can help me.

Highsoldierr.

A: Windows 10 volume control doesn't work

my solution:

CTRL+ALT+DEL, restart Windows Explorer

I have this problem when my computer comes back from sleep

1 more replies
Answer Match 88.62%

I'm running Windows XP SP2 and I have all my sound drivers installed (I can get sound just fine in every app), but I can't control the main volume in the Volume Control. I can adjust the volume with the Wave slider, but the main one doesn't do anything, including mute. Individual applications' volume controls work fine too, just not the main Windows one. It wouldn't be a problem, but it might be the reason why I'm not getting any volume on the Stereo Mix recording option. I just finished a clean install of XP (for a different reason) and it wasn't working before, either. Any ideas?
 

More replies
Answer Match 87.78%

Hi

Since upgrade to Windows 7 64 bit I can't turn the volume all the way down by using the volume control at the front of the notebook. Worked fine under Vista 32 bit.
The volume control still works but no matter how far I wind it to the left there is still sound coming from the speakers.

Any help appreciated.

Thanks
Warren

A:Tecra P5 - Volume control doesn’t work properly

As far as I know volume control in the past was mechanical but now it works on different way and it is controlled by specific tool/utility.
To be honest Tecra P5 is not known to me but obviously it is Australian notebook model and according to Australian support page this notebook model is not supported for Windows 7.

That doesn?t mean you cannot use it but this means there is not software package designed for Windows 7 that can be installed so I think there is no much you can do about it.

I know it is annoying but for volume control you can use Windows option placed in task bar.

2 more replies
Answer Match 87.78%

Yesterday I reinstalled Windows 7 on my notebook PC. I had to use a Microsoft installation disk because unfortunately, serious errors resulted after I installed from the HP recovery program. Consequently the HP drivers that were installed automatically with the recovery program weren't installed on my system. I had to install several of them from the HP support site. I got everything to work except for the Touch volume control, or the Volume Scroll Zone as referred to by HP in the service guide. This is the device located just above the keyboard that increases or decreases speaker volume when you drag you finger on it. I installed the Quick Launch button driver but that only applied to the mouse and pointer touchpad. I looked at the devices listed in my startup configuration. I saw the synaptics pointing device and the HP quick launch buttons listed. So is the IDT PC audio driver.  What am I missing? Where I can I find it to activate the touch volume control?

A:Touch volume control doesn't work on dv6, looking for driver

@accordeoniste Try these. http://ftp.hp.com/pub/softpaq/sp48001-48500/sp48425.exe http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46731.exe REO

2 more replies
Answer Match 86.94%

I recently had to reinstall windows XP on my computer. I installed the video and audio drivers that came with the motherboard cd. There is sound and the microphone works, but I can't control the volume normally, it can be controlled as wave.

Also the mixer device appears as SiS 7012 Wave.

I already uninstalled and installed the driver several times from the CD and I downloaded it and installed it too and the problem persists.
 

A:Volume control doesn't work (SiS 2012 Wave problem)

Anyone?
 

2 more replies
Answer Match 74.34%

Hi

Thanks in advance for any help
I've got a a Dell Lattitude D820 with Windows XP home.
One day, out of the blue, I started getting an error message when Windows tries to boot.
Unmountable_Boot_Volume

with some unhelpful directions, and then at the bottom,

Stop: 0X000000ED (0x864FB590, 0xC0000006, 0x00000000, 0x00000000)
I checked out some different places and the general advice was to try and boot windows from the Windows CD. After setting the BIOS and cleaning the disk, this is what happens

Blue screen with ?Windows Setup? appears and at the bottom it tells me all the little steps it's taking to get windows going. It all goes well and I get ?Setup is starting Windows?

but then I get another blue screen of doom, this one says:

Stop: 0x0000007E (0xc0000005, 0xF76130BF, 0xF7A5F208, 0xF7A5EF08)

pci.sys- Address F76130BF base at F760C000, DateStamp 3b7d855c

I'm not even sure I can reformat if the CD won't work. Ugh.

A:Unmountable Boot Volume, and Windows CD doesn't work

Are you using IDE or SATA. Did you check to be sure you are using the proper cable if you are using IDE? That could cause the first error and the second error. The second error is a driver based error. Hopefully you have a backup because there is a possibility your hard drive is dying. My suggestion...check the cabling...remove any unneeded hardware from the computer...check to make sure everything else is seated properly and try to start up. How old is the computer?

6 more replies
Answer Match 73.08%

I can't use my Control with any other key to copy, cut, paste, or
bring up task manager.

Help please and thanks, Mary

Here is my hijackthis text file.
 

A:Control/C Control/V control/alter/delete doesn't work

Mary, keyboard problems are not invariably software or malware-related. First things first - what OS are you talking about ? XP, Win 7, Win 8 or what? What type of keyboard is it? PS2, USB or wireless?

Disconnect it and reconnect it a few times, reboot and try again. Turn the keyboard upside down, placing one end on the edge of a thick book, and thump a few times on the back with your hand. Sweep the crud onto the carpet.....

Is it just a keyboard hardware problem, and if so which keys? http://windows.microsoft.com/en-gb/windows/keyboard-shortcuts#keyboard-shortcuts=windows-7 tells you a lot of key combinations with ctrl and shift and alt. Tell us if any or none work?

Open a document and try typing a bit of text. Do all the characters work?

If it appears the keyboard is faulty, can you borrow another to test?

Quite often, keyboard problems are down to wireless problems: and can often be solved by re-installing the keyboard driver.
 

2 more replies
Answer Match 71.4%

Hello,
I recently got this problem, that my volume hotkeys stopped working, (Acer Aspire 5560G) AMD High Definition Audio. I also tryed plug in other keyboard that have's volume hotkeys but still doesn't work.

A:Volume hotkey (fn+volume+-) doesn't work

Still need help

2 more replies
Answer Match 71.4%

I just spent the last 30 hours downloading and installing all the update for 8.1 on my new Acer Laptop. Now the system will not shut down, update will not open and restore does not work. Also the sound system does not work. I've tried the recovery options but all I get is unending aero. Shutdown produces background apps still running and will only work if I physically turn off the power.

I'm at a loss to know what to do next. I did not expect to have these problems with a brand new system and by following all the proper procedures for updating.

More replies
Answer Match 71.4%

You can perform the steps mentioned on the following link.

http://support.microsoft.com/kb/319095

OR

If you do not have the Windows XP retail CDs you can Download Sndvol32.exe from the below mentioned link and place it in C:\Windows\System32 folder.

http://www.relaxingsoftware.com/sndvol32.exe

 

A:Windows cannot display the volume control on the taskbar because the Volume Control p

Thanks For The Info arjunaj

Welcome To TSG ...
 

1 more replies
Answer Match 70.14%

So i was trying to make some room on y C drive and i guess i deleted some files that i shouldnt...To make a long story short now my volume control thingy that stays on my taskbar has dissapeared.When i go to the control panel and to sounds and audio devices and i get in there and there is an icon with the option to place volume icon on the taskbar but when i click on that i get 'windows cannot display the volume control on the task bar because the volume control program has not been installed...After several tries i figured i deleted the windows file soundvol32.exe
but how the hell do i get it back and put it in its right place???I have no idea where it would go??Anybody have an idea how i can install that back????I tried using my windows cd but since i put service pack 2 on it it said that the version of windows i had on the cd was older than my current version...Any help would be GREATLY appreciated.
Thanks in advance
 

A:Solved: Volume Control computer "windows cannot display the volume control on the task bar"

12 more replies
Answer Match 69.3%

Windows XP Home SP2.
Pretty often clicking on my sound icon (Which IS present in the system tray), does not open the volume control slider. When this happens I go to Control Panel but Sound controls won't open from that location either. There's no way to control the volume and must reboot to get it back (temporarily, because it keeps happening).

Do I possibly need driver updates? If so, which one of these is my sound card?
SoundMAX Integrated Digital Audio
Unimodem Half-Duplex Audio Device

Or is it an XP problem.
 

A:Sound icon is there but doesn't bring up volume control

6 more replies
Answer Match 69.3%

I did a scan from 317 here are the results

Results of screen317's Security Check version 0.99.89
Windows XP Service Pack 3 x86
Internet Explorer 8
``````````````Antivirus/Firewall Check:``````````````
Windows Security Center service is not running! This report may not be accurate!
AVG 2013
`````````Anti-malware/Other Utilities Check:`````````
CCleaner
Java 7 Update 71
Java version out of Date!
Adobe Flash Player 14.0.0.179 Flash Player out of Date!
Adobe Reader XI
Mozilla Firefox 32.0.3 Firefox out of Date!
````````Process Check: objlist.exe by Laurent````````
`````````````````System Health check`````````````````
Total Fragmentation on Drive C:: 2%
````````````````````End of Log``````````````````````
I clicked control panel and printers faxes. Says no driver detected, so I installed the driver. Still says no driver detected and my volume control doesn't show up . Any ideas on how to get this printer going again? I got a business to run. I use the card reader on this Epson CX6000 printer to upload photos onto this PC, and I haven't been able to for 3 weeks now........
 

A:no driver detected and my volume control doesn't show up

16 more replies
Answer Match 68.46%

OK i got a dell Latitude d620 intel core 2 duo Windows Xp. I have tried alot of stuff to get my volume control to work !! But all has failed.. I have Legacy audio Driver and it is enabled and working. But when i try to turn volume up in the controls it says no audio mixers found. Can anyone help. I have tried many things and all failed.

A:Volume Control not work

Also wanted to add that it is a laptop and the speakers do work cause when an error happens it does beep!! and that is the only noise it makes. No power up noises nothing from the web or anything.

3 more replies
Answer Match 68.46%

My computer is an HP a1213w. The sound randomly stopped working while watching a YouTube video. The box claims there are no mixers available. I checked to see if my sound card is working properly; it is. I was told to make sure it was on automatic and push start, and I did all that even though it was already done. The speaker icon isn't on the toolbar. iTunes and MySpace music won't play. I have Windows XP. Sorry for any mistakes. THANKS! I have now realized how much I appreciate my hearing...

A:Volume Control Won't Work

You may have a corrupt driver.
Go to the Control Panel & double click the System icon
Click on the Hardware tab
Open the device manager
uninstall the sound device
restart the unit to let it reinstall
if that doesn't work download the driver from the manufacturers web site & install it.

sorry about the lack of caps, i'm holding a slice of pizza with my left hand.

3 more replies
Answer Match 68.46%

Hi:

Just made a fresh intall of Windows 7 (32 bit). This was done from scracth with Toshiba CD. The drivers I downloaded from Toshiba website. Everything is ok, except the volume wheel it doesn't control the sound.

Does anyone know wich driver I'm missing? Every other butons and functions are active except volume wheel.

A:Portege M750 - Volume Wheel doesn't control the sound

Hi

Did you install the VAP (value added package) for Win 7?
On Toshiba EU driver page VAP v 1.2.40 can be found

15 more replies
Answer Match 68.04%

I have just bought a Acer laptop. The model, as it says on my laptop, Aspire 4752-6838.

The problem is that my fn hotkeys do not work for raising and lowering the volume or muting or playing. That would be fn + up, fn + down, and fn + f8, respectively.

Interestingly enough, my fn hotkeys work for other functions like num lock, brightness. Im not sure about my other fn keys working, but i dont have a need for them, so i dont care. However i really want to use my fn hotkeys for volume control.

Is there any way to enable this? Or does any one know where this problem arises and a solution?

BTW i read the manual and it doesn't help me with my problem. I also tried searching google and found no help either. If anyone knows where else i can look, that would help too.
 

A:My fn hotkeys do not work for volume control

Take it back to where you bought it and have them take a look. It could be a faulty keyboard. What version of Windows are you running? Have you run Windows update till no more updates are found?
 

3 more replies
Answer Match 67.2%

I have always been a fond user of multimedia keyboard/mouse controls, particularly volume control. Unfortunately, ever since I got a new audio card (Creative SB X-Fi) in order to use digital surround sound (SPDIF DTS encoding >>> amplifier), muting still works, however, volume control doesn't change anything.

Now I am aware of all the arguments that you can't change digital output volume, however, i know this CAN be done. I have done this myself in two ways, firstly, by changing the EQ level in the Creative volume mixer, and more intruigingly, by changing Creative's "What U Hear" level in the recording tab of the control panel sound controls pane.

Ideally, I would like keyboard volume controls to adjust the "What U Hear" level, however volume control only changes the default PLAYBACK device, and "What U Hear" is a RECORDING device.

So here is my Question:

How do you configure volume controls to adjust the "What U Hear" level? Alternatively, can digital volume control be achieved in another way?

I'm sure this can be done by changing a registry key associating volume +/- and default device, but no luck so far. If anyone can help or has another method for control digital volume I would be much appreciated.

PS. I am not interested in using my amp's remote for volume so please don't suggest that.

A:Creative X-Fi digital volume control. Help, I KNOW this can work!!!

Unless you are a programmer and can create a program to do this specific task, I don't see a way around it. The S/PDIF doesn't use the sound card or at least the parts of it that can be controlled by the usual methods.

What you are hearing in the PC speakers is being generated by the PC's sound card, after the digital section so that is two different functions.

It looks like, to me, that "you can't get there from here".

4 more replies
Answer Match 67.2%

My new keyboard works, except for its volume control buttons and its l<< >ll >>l previous play/pause and next buttons. Why is this and how do I get them to work??

My keyboard is a wireless Logitech K360

A:New keyboard volume control buttons don`t work

Hi inaniloquent, Have you loaded the drivers ? Support + Downloads: Wireless Keyboard K360 - Logitech Setpoint software controls the key

5 more replies
Answer Match 67.2%

Hi, my speakers play sound but when I plug the headphones into the master speaker on the right it doesn't play audio anymore through the headphones. I tried several pair, one even brand new and no luck, however when anything is plugged in the audio stops. I tried plugging them into the back of the desktop and the front even but none of the 3.5mm audio jacks seem to want to allow Windows 7 to recognize the head phones.

My son is playing some browser game and it's driving me mad to have to listen to it in the back round and was hoping someone could help me navigate the volume control options in Windows 7 so I could fix this for myself, thank you

A:[SOLVED] Volume control options &gt; playback devices doesn't list my headphones just sp

First thing, are you sure that the jack on your speaker system works?

Next, I would advise you reinstall your sound driver.

12 more replies
Answer Match 66.36%

hey!

so i was in my control panel deleting things i didn't need the other day and i might have deleted something with my volume because it doesn't work anymore! when i go into my volume control the main bar doesn't move and it shaded light gray and its not muted or anything that box is light gray too! when i click on the bar to try and scroll it the computer makes a beep. how do i fix this?? i'm in the middle of no where in Australia and will be for a while!! and i'd like to be able to use it for dvd purposes etc!

Thanks for your help!
 

A:volume control doens't work! shaded gray

In the Control Panel, click on Sound and Audio Devices Properties, then on the Hardware tab. Select your Audio device and click on Properties. In the window that opens, at the bottom, make sure the device is Enabled. If it already is, you can try updating or reinstalling your sound card driver.
 

2 more replies
Answer Match 66.36%

I have bought Inspiron I5558 signature edition 5 months back.My speakers are not working after it reaches 50 percent of volume till then they will work fine. I uninstalled and installed new audio drivers but problem is not solved. Please help....

A:Speakers doesn't work after certain volume

Hi kash2528,
I would suggest you to update BIOS and reinstall the audio driver on the Dell system. Please follow the steps mentioned below to uninstall the audio card.

In the search box, Start typing devmgmt.msc and then press enter.
Select the Sound, video and game controllers listed and expand it.
You should find Realtek High definition audio or audio controller please right click on it.
Now select properties.
In the properties window, under Driver tab, click on Uninstall button.
Check “Delete the driver software for this device.”
You want to delete the driver click OK.

After uninstallation please enter your service tag # on the link below, select the OS, then download the BIOS from BIOS section and audio driver from audio section onto the system and install it.
http://dell.to/18r60nI
Please let me know if this helps.

1 more replies
Answer Match 65.94%

ok so this problem was just about from the beginning. i thought i would be patient and it would go away. at first i noticed that while using msn messenger, its volume control for voice chat controled the main volume for the whole pc. so if it was low things wouldnt sound as high as i wanted. no matter if i adjusted the main volume in the control panel, which was always set to highest, the volume would still be at the mercy of Msn M. so if it was lower than usual i would have to sign into msn m and adjust it. not only does this happen with msn m. it also happens with web video applications used by youtube, livevideo, etc etc! those arent usually the culprit of low sound. its usually just msn m. even now with live messenger i have the issue. im tired of being patient so here i am

windows xp sp2
1.8ghz
2gig ram.
anything else? sound card? the sound card came with the mobo. its a Realtek AC'97.
thanks for any help.
 

A:Other volume bars control the main volume of windows xp

trying to keep it alice bump~
 

1 more replies
Answer Match 65.52%

Hello I have a Lenovo S5 Yoga 15 20DQ0038SP and suddenly volume sidebar it doesn't work. With Fn key works. Windows 10 instaled, what could be the problem? Thanks!!

More replies
Answer Match 65.52%

Hello, I have an X1 Yoga and just noticed that the volume rocker (the physical buttons on the right side of the computer) don't seem to work when my lid is closed.  When the lid is open, the rocker works great.  But not otherwise. I have tried playing music from both Spotify and Youtube.  Both sources of audio don't work.  (Not sure if that's relevant, but just thought I'd mention it.) If there are any other X1 Yoga owners out there, could you please test this out?  I normally adjust volume with the Fn keys (with the lid open, obviously) so I didn't notice this issue until today.  I was just trying to listen to music with the lid closed for the first time today when I noticed the problem. Thanks!

More replies
Answer Match 65.1%

Pasting in contextual information from another post. ~ OBconflicker.Bi!nf worm keeps reappearing, windows defender monitor stops working, slow computer, windows search protocol windows pop up, Malware, virusPop up windows keep appearing "Windows search protocol host stopped working and was closed" Itunes occassionally doesn't work, Media Sync doesn't work. Hard Drive keeps working in the background. Windows Defender no longer monitors the running programs.End of added information. ~ OBLogfile of Trend Micro HijackThis v2.0.2Scan saved at 8:46:00 AM, on 1/11/2010Platform: Windows Vista SP1 (WinNT 6.00.1905)MSIE: Internet Explorer v7.00 (7.00.6001.18349)Boot mode: NormalRunning processes:C:\Windows\system32\taskeng.exeC:\Windows\system32\Dwm.exeC:\Windows\Explorer.EXEC:\Program Files\Windows Defender\MSASCui.exeC:\Program Files\Digital Media Reader\readericon45G.exeC:\Program Files\Java\jre6\bin\jusched.exeC:\Program Files\Intel\IntelDH\CCU\CCU_TrayIcon.exeC:\Program Files\Common Files\Intel\IntelDH\NMS\Support\IntelHCTAgent.exeC:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exeC:\Windows\WindowsMobile\wmdc.exeC:\Windows\System32\hkcmd.exeC:\Windows\System32\igfxpers.exeC:\Windows\sttray.exeC:\Program Files\... Read more

A:microsoft windows search protocol host stopped, slow, firefox doesn't work, itunes doesn't work

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Answer Match 64.68%

Hello, I have an X1 Yoga and just noticed that the volume rocker (the physical buttons on the right side of the computer) don't seem to work when my lid is closed.  When the lid is open, the rocker works great.  But not otherwise. I have tried playing music from both Spotify and Youtube.  Both sources of audio don't work.  (Not sure if that's relevant, but just thought I'd mention it.) If there are any other X1 owners out there (Yoga or Carbon; I believe they're very similar), could you please test this out?  I normally adjust volume with the Fn keys (with the lid open, obviously) so I didn't notice this issue until today.  I was just trying to listen to music with the lid closed for the first time today when I noticed the problem. Thanks!

More replies
Answer Match 64.26%

most of the softwares(or what it's called) in control panel doesn't work

when i click on control panel, it works

but after that ....like add or remove, add a hardware, most of them doesn't work

why's that?? can you help me?

tyvm

A:My Control Panel Doesn't Work

What error does it give if any?
Which ones do not work?
Have you disabled any services or anything in msconfig lately?
If they were working before have you tried to do a System Restore?

3 more replies
Answer Match 64.26%

i have my hp dv2415nr with windows 7 but my hp control doesn,t work how can i install my control any ideas?? i have my wireless assistant on wath else can i do to make it work?
 

A:hp dv2415nr control doesn,t work help

HP tends to supply installation instructions for their products--both on paper and on their web site.

Mind explaining what your "hp control" is?
 

1 more replies
Answer Match 64.26%

I can never get into control panel. I get an error message that looks like this:

AppName: explorer.exe AppVer: 6.0.2800.1106 ModName: unknown
ModVer: 0.0.0.0 Offset: c0002fad

and it says that they will send this directory:

C:\DOCUME~1\Allen\LOCALS~1\Temp\WER31B.tmp.dir00\appcompat.txt

I have included a HJT log that my help. THanks.

Logfile of HijackThis v1.99.1
Scan saved at 4:00:27 PM, on 4/28/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\iolo\System Mechanic 4\PopupStopper.exe
C:\Program Files\MSN Messenger\msnmsgr.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\System32\wuauclt.exe
C:\WINDOWS\explorer.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE
C:\Documents and Settings\Allen\Local Settings\Temporary Internet Files\Content.IE5\4HCR0RO3\hijackthis[1]\HijackThis.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.buccaneers.com/
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Local Page =
R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName =
O3 - Toolbar: &Radio - {8E718888-423F-11D2-876E-00A... Read more

A:Please help me out, control panel doesn't work, HJT log, etc.

10 more replies
Answer Match 64.26%

Hello i have strange problem, my hp remote not work on windows 7. After 2 years i preinstall from vista home preimum to win7 ultimate. My laptop is hp pavilion dv7-1023cl
and i have all windows 7 x64 drivers, and all hp services running on automatic mode, HID also. I try many many times to set up IR to receive signal from remote, but i no have success. This is information from back side on remote:
RC1762307/01
3139 228 53391
HP SPS: 464793-001
HP: HSTNN-PRO7

P.S: I hope to help if it is possible that this problem be solved.

A:Remote Control Doesn't Work in Win-7

ok i think you possibly need the drivers for your remote, after a long search i came up with this,

HP Support & Drivers | United States

select the detect your product and it will scan your machine and tell you what drivers and software are available ,

9 more replies
Answer Match 64.26%

When I try to use the C-A-D command nothing shows up. I have tried right clicking the task bar and then clicking task manager but that doesn't work either. It opens in safe mode but not in regular startup. I have also tried opening regedit but i get an error that says: " C:\WINDOWS/system32\regedit.com The NTVDM CPU has encountered an illegal instruction. CS: 0ddc IP: 00b7 OP:65 63 69 66 79 Choose 'Close' to terminate the application. I have attached the hijack this log. let me know if there is any thing that shouldn't be here. thanks.

Logfile of HijackThis v1.99.1
Scan saved at 8:40:11 PM, on 09/11/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\SYSTEM32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Analog Devices\SoundMAX\Smtray.exe
C:\Program Files\Intel\NCS\PROSet\PRONoMgr.exe
C:\Program Files\Logitech\iTouch\iTouch.exe
C:\Program Files\Intel\Intel(R) Active Monitor\imontray.exe
C:\Program Files\Java\jre1.5.0_02\bin\jusched.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\DIGStream\digstream.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\Program Files\winupdates\winupdates.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\system3... Read more

A:Control-Alt-Delete doesn't work

Hi and Welcome
It may help you if you print out or copy this page for easy reference.. Make sure to work through the fixes in the exact order its listed..These instructions only apply to HJT v1.99.1

Please Keep your browser and all open programs closed (except firewalls and antivirus) when you are carrying out the fixes..

Download any of the required programs before attempting to start any of the fixes.

Please do NOT run Hijack This in a TEMPorary folder or on the Desktop. I recommend c:/program files/HJT/

Turn off System Restore instructions (WinXP)
Rightclick My Computer | Properties | System Restore | check ?Turn off System Restore?, <Apply>, <OK>. Reboot. When we have confirmed that your log file is clean, you may renable System Restore and create a new restore point.

SHOW HIDDEN FILES AND FOLDERS.
To show hidden files instructions (WinXP)
Doubleclick My Computer | Tools | Folder Options | View tab
Select Show Hidden Files and Folders
Uncheck Hide extensions for known file types
Uncheck Hide protected operating system files (Recommended)
Select Apply to All Folders | Yes | Apply | OK
------------------------------------------------------------------

If you hav'nt already done so,download and run Adaware,SpyBot (check for updates) for a preliminary cleanup first.Some files below may not be present after running the above programs.Full instructions below.

How to setup Ad-Aware

Download Ad-Aware
Save aawsepersonal.exe into ... Read more

1 more replies
Answer Match 63.84%

I'm running Microsoft professional, Internet Explorer and have a Google toolbar.

All attempts to add software are blocked and the add remove feature in the control panel won't open. For example, I can't update my old version of Itunes because the popup for the update gets blocked. I know about the popup blocker in the Google toolbar, and how to handle that, that isn't the problem. In Internet Options, the security setting is at medium and under the advanced tab I reset all options to default.

A:Add Remove In Control Panel Doesn't Work

What version of IE are you using?

What other security programs do you have on the computer? It's possible that one of them is blocking the pop-ups.

Orange Blossom

7 more replies
Answer Match 63.84%

Well I dont know what caused this but I can open the control panel but when I click on something eg. "uninstall a program" or "change the theme" there comes a message saying windows explorer has stopped working, thus restarting explorer.exe

I'm running windows 7 professional 32 bit.

Edit: it also crashes when I reopen the control panel when the control panel is already open.

More replies
Answer Match 63.84%

Not sure if ths belongs here or in the security thread??

I could swear I've seen similar problems on this forum, but I did a search and didn't come up with anything.

3Ghz Pentium 4 512 MB of RAM running XP Pro. Last night a user on this PC installed MS updates, by logging off via the "install updates and shut down" option. When she came in this morning, the PC didn't respond to control + alt + delete. She asked me for help in logging on. I clicked on the help link in the control alt delet prompt, and the password prompt came up!?

The MS update button(at the bottom right corner of the screen - not sure what this is called) on her login still had the exclamation point on it, so I clicked on it to install the updates again. It installed and prompted for a restart. So I clicked on the restart now option. Nothing happened. I went to Start->shutdown, and nothing happened. I hit control alt delete, and nothing happened.

Ran spyware checks via spybot and ad-aware and they only turned up cookies. I am in the process of running a virus check right now.

My userid on the same computer has no problems. When I hit control alt delete, I get the standard prompt.
 

A:Solved: Control Alt Delete Doesn't Work

8 more replies
Answer Match 63.84%

I clicked on "Turn parental control on and deny computers access to ONLY these sites", entered the website url in the box, ticked it and set the schedule to always. But when I try to access the blocked web page it takes a little longer than usual but then loads on the website normally.

The two sites entered in the boxes are the ones I've tried to test the feature with, but both are not being blocked.

Can someone see anything I've done wrong?

I have tried emptying the cache and rebooting the computer and router, but still the pages just refuse to be blocked.

What's happening??? Advice would be appreciated.
 

A:Why doesn't my dir-300 router's parental control work?

hum; did you try just the domain name without the http:// ?
also try without the trailing / after the domain name
 

6 more replies
Answer Match 63.42%

Hi everybody,

as described I use a Logitech G510 keyboard with multimedia keys and the posibility to insert a headset into it (the keyboard got its own soundcard). The keyboard also got a volume wheel which worked with Vista like it should: I could controle the speaker's volume by the keyboard.

Now with Win 7 I can't use the wheel anymore, even with the latest drivers. Does anyone know this problem?

My system:
OS Win 7 professional 32 bit
Intel core duo E4500 2,2 GHz; 2GB RAM
Sapphire HD5770 graphiccard
Best regards from Germany!

A:Logitech G510 keyboard's volume controle wheel doesn't work...

I found the answer in this thread! Sorry for opening this thread...

keyboard volume controls wont work

2 more replies
Answer Match 63%

Hi,
I recently noticed that my ctrl+a doesn't work. All the other ctrl combinations do! Ctrl+a doesnt allow me to "select all" while word processing or use this combination in games (first person shooters).

I have a logitech G15 and other keyboards and they all dont allow me to use ctrl+a. I have tried different versions of keyboard drivers for my G15 and without. I plugged the keyboard into another W7 and it works

Im assuming this is an issue with my OS now.

I know reinstalling windows is a option but want that to be the last resort as i only reformatted last month(i think it only started occurring when i reformatted)

EDIT: I have fixed my issue - it turns out my user account was corrupted, so I had to make a new one and copy all my documents folder over!

A:Control A combination doesn't work (Games and select all)

Hi richyo and welcome to Seven Forums.

Glad it is fixed for you. If you computer is corrupt maybe you should run the sfc /scannow command here is how: SFC /SCANNOW Command - System File Checker

2 more replies
Answer Match 63%

I try to make changes in my internet connections but they never seem to take. I have noticed that the apply button is not in bold letters and I am unable to click on it when I make any changes. Does anyone know what is the cause of this and how I can correct it?

A:Apply Button In Control Panel Doesn't Work

What programme are you using apply to?
Can you provide a path so someone can look at the panel?
Cheers,
John

2 more replies
Answer Match 63%

When I click on My Computer either on Desktop or in the Start menu folder, a screen appears as shown here. But I can access these items from the Windows explorer icon on the task bar!!
Also whenever I click on any folder or drive in My computer window, the contents open in a new window and I end up in a large number of windows opened by the time I reach a file or a folder.
How can I fix this?

A:My computer and Control panel icons doesn't work?

Welcome to Windows Seven Forums.

Sounds like you may have a virus.

If you can, boot into Safe Mode with Networking and run a full virus scan.

Malwarebytes is an excellent choice for this job and you can download it here: Malwarebytes : Free anti-malware, anti-virus and spyware removal download

1 more replies
Answer Match 62.16%

Hi,
Occasionally, when resume from hibernation/suspend, display brightness control doesn't work. Means that Fn + F2,F3 doesn't work, change from Windows Power Options doesn't work, change from intel graphic doesn't work.
Anyone know if I have to restart some services to get it working? It's occasional and I can't find anything exact in EventLog.
My system is HP Probook 4230s with Core i5-2410 with intel HD3000. Latest patches on both Win 7 Pro 32-bit and intel driver.
Restart machines solve the problem, re-hibernate or re-suspend machine occasionally solve the problem, but mostly not.

A:LCD Brightness control doesn't work after resume from sleep/hibernatio

See if HP have an update for their firmware or function key control drivers. I know its a new pc, but its worth a shot.

2 more replies
Answer Match 62.16%

How can I get the Windows 7 Control Panel Backup & Restore link to work? When I click on it it does nothing

A:Control Panel Backup & Restore link doesn't work

Have you run
SFC /SCANNOW Command - System File Checker
lately?
Either there is a problem in the windows file structure which sfc will check for, or a service the feature depends on has been disabled.
That's about the only two scenarios I can come up with.

3 more replies
Answer Match 62.16%

I am hoping someone on this forum can help me. I have a Thinkpad X60s, about a year old and I am running XP. Randomly my computer becomes sluggish so I try closing programs. I then figure out that one program is frozen (come to think of it, that program may always be IE) and I can't close it. I then try to warm boot with ALT CONTROL DELETE but it doesn't work. In fact, instead of getting the task manager, my screen saver comes up without any icons on my desktop. I have no cursor and can't do anything but unplug or take out battery and manually crash the computer. It then will start normally though it takes longer for the icons to appear.

I regularly download both IBM and Windows updates, I defrag regularly, do virus scans etc using Norton 360. I also have run Think Pad Productivity Center maintenance tasks.

Other than that and the slugglishness the computer runs ok.

Any help out there? I am frustrated and IBM has not been able to help, except by telling me to change the hard drive or send it to them.
 

A:Freeze,alt control delete doesn't work, lose all icons

Yes I think this is a hard drive issue too. Check to see how much space you have left on it. Go to My computer and right-click on the C drive icon. Click Properties... Also, you might consider checking the hard drive with a utility like Seatools from Seagate. IBM notebook drives are noted for their high failure rates...

Back up your important data please, ASAP

Good luck
 

1 more replies
Answer Match 62.16%

When I click on "Back up your computer" in Control Panel->System and Security, I get a gui that says "Back up or restore your files" at the top and nothing else. The rest of the window is blank. No "Turn off schedule",
"Create a system image" or "Create a system repair disc" on the left. I've tried a reboot. This is on Windows 7 Pro Service pack 1 (32 bit - 4gb ram). I've been using the backup method for several years. All of a sudden - poof.

More replies
Answer Match 62.16%

hi ,
i was trying to fix one of my friends old computer. On that all of a sudden sound stopped working. sound files seems to be playing ,but no output comes through speakers or headphones.
I have done all the basic tests, and evrythng is fine. When i checked in control panel ->sound and audio->voeme tab , device volume ans speaker settings i can't use, it appears like disabled.
Pls note the audio drivers(realtek alc650) are properly installed. I have spent more than a day downloading and reinstalling the drivers and googling to find out the issue. But still in vain. Now i want to try reinstalling XP, but my disks r missing , so i need to give a try in this forum. Pls help.
 

A:Sound doesn't work (Realtek ac650) and control panel

Look in device manager if the sound device is enabled. If you don't see it, you might need to enable it in bios.
 

5 more replies
Answer Match 61.74%

Hello, I have a problem with connecting my SE K700i cell phone with Windows 7 notebook via bluetooth. I have paired them, file transfer is available, the problem is remote control (HID profile) - when trying to connect either desktop, presenter, kmplayer or any other, it always shows "Bluetooth connection failed. Retry?" I do not know what to do with that, with Vista it worked properly, the driver is the same, so what is the problem? Would be happy, if you could help me.

edit: the problem is in Windows - remote control does not work neither with another cell phone. It has Bluetooth Stack for Windows by Toshiba.

A:BT problem: Win7~cell phone-remote control doesn't work

Thx, I have already solved that - In BT settings an option of creating HID was hidden, it offered just dial up networking.

2 more replies
Answer Match 61.74%

Hi, I had some issues with a HDD around this time last year, so I replaced it with a new western digital HDD. I wasn't able to back anything up, so I cloned it instead.

turns out I installed the incorrect driver for my video card and suffered from the BSOD syndrome....

well, I finally got that sorted out, ( I think ) and now I am trying relentlessly to get catalyst pro control center to work properly. Ive read numerous places online that involves editing the Assembly folder, but I have no such keys in there.

when I try and run CCC, it tells me that I am unable to run as I wouldn't be able to change any settings within the app basically. Ive tried uninstalling, installing. trying ATI opposed to AMD- to no anvil.


I know for a fact that I had CCC on this pc, but it almost seems impossible to get up and running, I am very desperate to get this up and running.

thanx in advance
 

A:Catalyst Control Center doesn't work after I installed the wrong driver

Hhhmmmm... let's take a look

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop
Attach it to your next post by clicking the Upload a File button

 

3 more replies
Answer Match 60.9%

If I try to use the Ctrl-Click action on web pages that allow you to select multiple items in a list box, a new ie session opens (to my home page) instead of allowing me to make multiple selections. This happens with ALL web pages that have multiple select boxes. It only happens on my desktop (XP with i.e 7), and not on other computers in my house with ie7.
- I tried disabling ALL active X controls and add-ins. Still didn't work.
Any ideas please? (It's maddening!!)

A:Control-Click doesn't work with multiple select lists-it opens a new ie page instead

One thing you may want to check is the control panel/accessibility options and make sure nothing is checked in there. Sometimes the accessibility settings for the keyboard will play havoc with what you think should be happening with keys.

6 more replies
Answer Match 58.8%

I deleted some software and i accedently deleted my volume control software......how do i get it back plz help....!!!!!!! Thnx

A:windows xp volume control

Look at the thread below, read through it. hopefully something there may help. Good Luck!

http://www.pcreview.co.uk/forums/thread-3238541.php

6 more replies
Answer Match 58.8%

Why doesn't my volume control have a "mixer" option and how can i make one be there. I really need one because i use my laptop to watch tv/movies as i'm going to sleep but i also use it as an alarm clock and its a pain in the neck to turn the volume way up on my speakers then turn the VLC volume down to like 5% so whenever my alarm clock opens foobar the music plays loud enough to wake me up.

I'm running Windows XP Home SP3
i do have a mixer through the realtek hd audio controller but the only options there are to control cd volume and master volume.

A:windows xp volume control

Go to Control Panel/Sounds and Audio Devices/Audio/Volume

6 more replies
Answer Match 58.8%

My window's volume control is gone as in-Dissapeared from my taskbar.

Also Window's does not at all detect my Logitech X-230 sound system/speaker and says I have no such thing attached to my computer. I have checked all the cables and all of them were firmly attached.

It would be greatly appreciated for any help on these problems or the driver for the sound system.

Thanks,
TechHelp24

A:My Windows Volume Control Is Gone.

Open the Device Manager and look for a yellow ? beside sound and audio. Right click then click update driver. Let it run using auto settings. Windows should find the drivers again. If this does not work, right click the device in device manager and click remove. Reboot the system

3 more replies
Answer Match 58.38%

I've recently encountered a bizarre problem on my XP Professional machine. When I click on the volume control button near the clock, my computer will freeze and won't respond to anything but the restart button. I have no idea what could be causing this. I've scanned my comp with Norton as well as AdAware and SpyBot, hoping that viruses or spyware could be the issue, but I had no luck. Trying a system restore wasn't able to fix the problem either.

Other problems with freezes occur in Trillian, Winamp and Windows Media Player, but these seem random, not every time I start the programs. All these symptoms appeared at the same time, so I'm assuming they're somehow related. I've tried switching to Winamp 5.3 for mp3 files and video files, but the freezes still occur. The problem with video files extends even to looking at their thumbnails, which sometimes causes my computer to freeze as well...

Any help anyone could offer would be greatly appreciated.
 

More replies
Answer Match 58.38%

I would like to control the volume of a player, foobar, Aimp, XBMC, a Media Center etc. with the volume control of a keyboard or a remote control, but when I use these keys the Windows volume control will be used? How could I avoid it?

A:Avoid using Windows volume control?

I don't think that you can...you could do so within Windows by use of an app, but...even then I suspect that just mutes or feeds off the Windows volume control.
 
Louis

2 more replies
Answer Match 58.38%

i recently reinstalled my sound card drivers because my surround sound was not working. But now, the remote i have for Windows Media Center, and the sound controls on my keyboard don't work. Anyone know how to fix this?
Its really bugging me.

Thanks,
TRBMan
 

A:Windows XP M.C.E. Remote Volume Control

Give this a try and you have to have the Windows install software for the computer for this procedure or it will not work. It is a non-destructive procedure and will not hurt the date but I recommend backing up all of your important data anyway to another media like DC-R's, DVD or thumb drive first. And you might have to re-install any service packs, Drivers, and Windows Updates.

How to Perform a Windows XP Repair Install = http://www.michaelstevenstech.com/XPrepairinstall.htm
 

3 more replies
Answer Match 58.38%

First I noticed that the speaker icon in the bottom right corner wasn't there for my audio controls (and no, it's not hiding in task bar properties). Then I went to the Audio icon in my control panel to check the box "place volume icon in the taskbar" and it says: Windows cannot display because volume control has not been installed. See add/remove programs".

WHAT THE HECK?! It's not IN my list of programs to install, obviously! How'd I delete it, and more importantly -

how can I get it back???
 

A:Solved: Windows Volume Control Gone ?!?!?!

6 more replies
Answer Match 58.38%

I have Sndvol32.exe files in the system folder. In fact there are the following files:
Sndvol32.exe
Sndvol32.exe.mui (3 of these)
SNDVOL32.EXE-0EC6FD20.pf

I tried to execute the first file but I got the message: There are no active mixer devices available. Click printers and other hardware, then click add hardware. But I don't have printers and hardware, just printers and faxes.
What should I do to get the volume icon back in the taskbar? I don't have the original Windows XP installation disk.
Thanks
 

A:Solved: Volume Control in Windows XP

14 more replies
Answer Match 58.38%

Lost my window xp volume control button a while back, is it best to reload windows xp cd rom, will this bring all the functionsback, also lost my clock buttons so i cant turn back date time to reboot computer to bring back fuctions.
 

More replies
Answer Match 58.38%

When I select the Volume Control from the toolbar, or Adjust System Volume from the Control Panel, I usually get two sliders: one for Device - Speakers and one for Applications - Windows Sounds. Sometimes however, apparently at random, I get three sliders; for example when iTunes is active I get a third slider for it.

Recently I got a third slider for Windows Mail, which was handy because at that time I happened to want the Mail notification to be quieter than other sounds, so I pushed that slider down to halfway. That made Windows Mail very quiet, which was just what I wanted on that day.

My problem is, I would like to restore the volume of my Windows Mail notification to its former level, but I can't make that third slider reappear. Can anyone suggest where I can find it?

More replies
Answer Match 58.38%

whenever I try to use line in Volume control on windows Xp it does not respond. I believe it is greyed out. i would appreciate any advice in correcting this.
Thank you very much
 

A:Line In Volume Control for windows XP

Does your sound card actually have a line in?
 

1 more replies
Answer Match 57.54%

For some reason the onscreen display for the volume controls and screen brightness on my W530 stop working after coming back from sleep or resume. I updated Power Management, Hotkey and Interface but the problem still rears its ugly head. If I go into screen resolution and advanced and on screen then uncheck Enable onscreen and recheck it...the controls work again.

A:Volume control buttons do not display volume level...

try to reinstall the OSD software. Uninstall the current OSD software that you have, and download the latest version from below.
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS000949
 
Edit note: Wrong link. See below for the correct link.

5 more replies
Answer Match 57.54%

Problem: when i play songs or watch videos or do anything that deals with the sound, the wave slider in the volume control will automatically jump from the high volume that i set it at to mute.

I have checked out the properties and volume control properties and still can't find a way for it to stay un-mute.

My volume control is the SoundMax Digital Audio driver...
i checked the hardware and it says it working properly and i can hear the sounds but only for some time, before the wave volume automatically jumps to mute...

this is getting annoying....

Any one have a solution to keep my wave volume from muting it self permanently...

Please Respond ASAP

A:Windows Xp Volume Control With Wave Slider

Hmmm...you might try using the native XP volume icon, rather than Sound Max.

I have SM on my system but I don't bother to use, I see no advantage to using the XP volume control (I did try the Sound Max control for a period of time) and any program I use for music file playback will have it's own volume controls.

Could be possible file corruption...I might try uninstalling/reinstalling the drivers which load Sound Max (if I really wanted to use it).

One thing to remember about Device Manager...it has no way (that I know of) to distinguish/inform the user...if a file is corrupt or not.

Louis

4 more replies
Answer Match 57.54%

I am using Windows XP Professional with Service Pack 2.

Long Story:
The for a long period of time the left channel of my audio output was not working. I attributed this to a problem with the 3.5 mm output jacks, because after the front jack stopped giving left channel I moved to the rear jack until that one broke as well. I recently opened up the case, blew out a lot of dust, and poked the jacks a little with a screwdriver. This brought back left channel in the front jack, and partially fixed the rear. (If I inserted the male end of the jack only half-way in I could get both channels.)

I then noticed that the balances were all screwed up. I use a 2.1 speaker setup, and found that I could only get the bass working if I inserted the male jack halfway in to the input on the woofer, similiar to my problem with the rear output of my case and the left channel. Now that bass was returned it still sounded squeaky and/or muffled. I discovered that if I moved the Wave balance all the way to the left in the windows Volume Control panel it would sound normal. It would also sound odd if I had the Main Volume balance to the right at all.
Click to expand...

Short Story:
However, whenever I play a new song or adjust the volume in an external program (such as WinAmp or RealPlayer) the balance is centered in the Windows Volume Control panel.Click to expand...
 

A:Windows Volume Control Balances Reseting

Winamp Volume is directly related with your Windows Volume Control panel..
Try this WIth WMP ... IT Won't change
 

1 more replies
Answer Match 57.54%

Hello windows 7 fellas.
I've got a problem!
My volume control on my keyboard Saitek Eclipse II wont work on my windows 7 x64.
It worked fine with windows vista!
Well, to the point, does somebody know how to solve this problem?

Thanx in advance!!
/Emma.

A:Saitek Eclipse II + Windows 7 = No Volume Control

I have the same problem, except that it does (though rarely) work. The play/pause, next and previous buttons work fine but the volume and mute buttons don't.

Just in case this works for you:

Quick and Dirty fix to the Saitek Eclipse volume keys problem. - The Official Saitek Forum

also, be sure to follow the instructions on the linked site, and have it execute on startup...

7 more replies
Answer Match 57.54%

Hi all,

Just joined up....
What I want is actually the opposite of what most people are looking for.
I want to install windows 8 on my kids computer but want the volume level to be set at a certain level so the sound is not to high no matter what they do.

I am able to achieve this right now as the desktop is on XP and i have the wave bar set to a certain level so no matter how high they put the volume bar it just stays at a certain level.I have hidden the wave bar so they cannot even get at it by mistake.

The main thing is that I am using a sidewinder X4 keyboard which has the vol+/- so they can easily increase the volume even if I hide the volume tab from the desktop in windows 8, while in XP it remained a certain lvel even if they put it upto 100%.

I have been searching for win 8 mixers where I could maybe have the same type of control as the XP but so far have found nothing.

Any ideas would be greatly appreciated and used

A:Want to disable sound volume control in Windows 8

If they know what they are doing they can get around this.
See pictures :

2 more replies
Answer Match 57.54%

I'd access it by selecting the ^ to the left of the time and date on the bottom right hand side of the screen. But a few days ago, it was missing. I then clicked Customize, then Turn system icons on or off. The On/Off selection for the volume control
was greyed out yesterday, so I could not turn it on. Have no idea how it got turned off. Today, the On/Off drop down can be accessed, and I closed that screen and noticed the volume control is there again - between the Wi-Fi signal strength icon and Norton
Security. I'm no longer having trouble but I do wonder how/why did the volume icon get removed, and why was I not able to turn it back on? I don't recall changing any related settings or accessing Control Panel.

More replies
Answer Match 57.54%

Updated to Windows 10 from Windows 8.1 two weeks ago.
Had problems with Firefox.  Tried to download to replace existing Firefox.  CNET site appeared to be correct but something seemed wrong so I killed the download. But.
- The windows start menu doesn't come up when I click on the icon, but if I right-click, a text menu does appear and lets me, for example, shut down.
.- If I click on the Windows End icon in the task bar, the screen flashes but End does not come up.  Ditto for the Windows Store icon.
-  Somewhere SpyBot S&D was erased, but I was able to download it.
- If I double-click on a photo in Windows Explorer, I get a popup that lists the name of the jpeg and says Invalid Entry to Registry.  If I right click on the photo and go to any of the options the photo is opened except if I choose Photo.
- Firefox cannot properly display the Yahoo mail page, though Pale Moon and Opera can.
- I have Avast Anti-Virus and MalwareBytes Anti-Malware and when I run their scans, they find no issues.
 
SO there are a few issues that I need help with.
 

A:windows 10 problems - start menu doesn't appear, windows key doesn't work, etc

Hello,
Well the first thing you should try is to Run System Restore to before all of these problems started or to when you first installed Windows 10.
Then try to download Firefox from there website
https://www.mozilla.org/en-US/firefox/new/
Third thing is I would recommend to get rid of Avast it is low end and could be allowing virus I recommend ether McAfee or Norton Security.

Those are some things to think about
but it is all up to you when making your final decision

5 more replies
Answer Match 57.12%

Hello :)
I hope I put this in the right area..

I've been searching for a solution to this volume problem for a while now, but to no avail. I've found others with a similar problem, but no solution. So here's the deal: I just got a new motherboard, and ever since I got it my volume control has been faulty. First of all, all sounds are very quiet, even when all volume sliders are set to maximum. Next the main volme control has no effect whatsoever on the volume of the computer. I can can slide it all the way to the top, or all the way to the bottom, nothing changes. The only thing that makes any difference is the Wave control and it barely does anything. Also, when I put "Mute all"...it doesn't mute. However when I put mute for Wave control, no sound comes out.
All this is incredibly annoying because I often listen to music on my computer, but now I basically can't hear it. To note: I don't have a volume control on my keyboard, or on my speakers, and I know nothing is wrong with the speakers.

If anyone could help, I would really, really appreciate it. Thanks :)

A:Volume control issue-very quiet, main control uneffective

Are your speakers powered? If not you may have to invest in powered
speakers. This is a common issue with non powered speakers.

4 more replies
Answer Match 57.12%

Hi .

I am new here. For the past few weeks I have been having problems with my taskbar. It keeps crashing whenever I use the volume control located externally on my laptop(increasing or decreasing the volume). It randomly happens. I am currently running AVG antivirus. I scan the computer everyday with it. Also used the Windows Live OneCare scanner from Microsoft website. All scans show up clean. I try to close the explorer.exe from the task manager and restart it but the problem stays till i restart my computer again. I ran a DDS scan and these are the results from it. My Firefox works fine. I do not know if its a malware causing this. I dont have any unnecessary popups either. I also heard about combofix but not sure if i need to use it.

Any ideas anybody??

Syed

Also when i restart the explorer again the sound icon disappears from the taskbar, and i also updated my audio driver software from my laptop manufacturer website and the problem still persists.
DDS (Ver_09-03-16.01) - NTFSx86
Run by Haroon_Zehra at 2:56:48.62 on Fri 05/01/2009
Internet Explorer: 7.0.6001.18000 BrowserJavaVersion: 1.6.0_13
Microsoft? Windows Vista? Home Premium 6.0.6001.1.1252.1.1033.18.3062.1354 [GMT -5:00]

AV: AVG Anti-Virus Free *On-access scanning enabled* (Updated)

============== Running Processes ===============

C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\Mi... Read more

A:Windows Vista Explorer.exe keeps crashing while using volume control

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.comDDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the resul... Read more

2 more replies
Answer Match 57.12%

My speaker setup seems to make windows think that all my speakers are 'left'. I dont mind that it does, but the problem is that i will be missing out on all the action coming out of the sopposed 'right' speaker.

The Volume balance control sliders that you can access from Sound > Speaker Properties > Levels > Balance only control the volumes that each individual speaker has.

Is there a slider, windows function or program that can shift both the output from the left and right speakers, to the left speaker, so that nothing will be missed .

Many thanks,
SuperStinger

A:Windows 7 balance needed, NOT volume control for each speaker

More system specs are needed. e.g. what is the PC/Model Number or if a custom the motherboard. Also what sound do you have? such as RealTek, Conexant, SoundBlaster, etc.

1 more replies
Answer Match 57.12%

Recently I went through a day of torture by an unsuccessful attempt to System Restore. I lost a display driver from some inadvertent deletion in either Sytem Mechanic or some other registry cleanup program. I tried several solutions, then, perhaps prematurely, reinstalled Windows XP Pro. Experiencing further difficulties, I then reinstalled Service Pack 1, which fixed the display problem pretty much. BUT... some sound problems developed:

a) I was no longer able to locate any volume or play control. I found an article in the Windows Knowledge Base that told me how to install the play control panel through the command prompt from my XP Pro disk. This fixed this problem... But...

b) While I can now control the volume through the sys tray icon and the play control panel, I no longer have this function on my keyboard! I reinstalled the keyboard software from a download site, and the keyboard's shortcut button functions all work BUT NOT the volume control. The mute button works fine, but NOT the volume control buttons (the - and + buttons). They were working fine previous to my reinstalling Windows. I fear that some registry file or setting needs fixing.

c) Lately I have discovered a final and third problem. There is no sound recorder in my files! I find NO sound recorder in my Start/Programs/Accessories/Entertainment section, nor anything like this by conducting a file search. It seems that this recorder didn't get installed when I reinstalled Windows. Is there a file... Read more

A:No Sound Recorder in Windows XP and Can't Use Volume Control on Keyboard!

Check Device manager and particularly the Keyboard and Sound items. If either have yellow marks or don't agree with what you know to be the correct item, delete all of the listings and ask for a new detection, as you can do there.

Even if there are no apparent problems shown there, delete those two items anyway, you have nothing to lose and everything to gain. Windows will pick them up again and perhaps you'll get lucky.

Beyond that, be certain that you are supplying the correct drivers for the enhanced keyboard that you apparently have and if you have sound card drivers, supply those instead of letting Windows do a default selection for you. Normally XP does well that way, but you're evidently not a normal case.

Good luck.
 

3 more replies
Answer Match 57.12%

Hi everybody,

I am running Windows Vista SP1 on a new Dell computer, and have Windows Media Player 11 installed. The problem is with the volume control and it seems pretty strange. The volume control only works on WMV files. If I play any wmv file, I can control the volume, moving the slider, or I can completely mute the sound. However, with any other type of file (avi, mpeg), the volume is always at its maximum and moving the slider left or right doesn't do a thing. Pressing mute doesn't work either.

I am getting sound from a digital audio output on my sound card (Auzentech) and it goes to a DD 5.1 receiver.

I've searched the web, including Microsoft, and couldn't find anything related. Does anyone have any ideas what might be causing this?

Thanks!

A:Windows Media Player 11 Volume Control Problem

Anybody?

I can control the volume on all these files, if I use the VLC example, but it would be nice to fix this WMP issue.

Any ideas, guys?

Thanks

1 more replies
Answer Match 57.12%

For some reason, windows media player will not let me adjust the volume setting on some videos, whereas some others are fine. Initially, I thought it was a codec problem but according to G-spot and avicodec, I have them, and it doesn't appear to be any specific audio codec in general.
 

A:trouble with volume control in windows media player

bump
 

3 more replies
Answer Match 57.12%

Cant get it to updateand when i use thr troubleshooternit doesnt work either
 
Farbar Service Scanner Version: 21-07-2014
Ran by Administrator (administrator) on 03-01-2015 at 16:34:05
Running from "D:\Users\Administrator\Downloads"
Microsoft Windows 7 Ultimate  Service Pack 1 (X86)
Boot Mode: Normal
****************************************************************
Internet Services:
============
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.
Windows Firewall:
=============
mpsdrv Service is not running. Checking service configuration:
The start type of mpsdrv service is OK.
The ImagePath of mpsdrv service is OK.
MpsSvc Service is not running. Checking service configuration:
The start type of MpsSvc service is set to Disabled. The default start type is Auto.
The ImagePath of MpsSvc service is OK.
The ServiceDll of MpsSvc service is OK.
Firewall Disabled Policy:
==================
System Restore:
============
SDRSVC Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
System Restore Disabled Policy:
========================
Action Center:
=====... Read more

A:Windows 7 doesn't update and troubleshooter doesn't work

Hello,
 
Please follow the instructions Here to run the System Update Readiness Tool. When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:C:\Windows\Logs\CBS\CheckSUR.logC:\Windows\Logs\CBS\CheckSUR.persist.log

1 more replies
Answer Match 56.7%

Hello!
I have a problem. I have adjourned the bios of the pc acer aspire M1641 and when I have restarted the pc tuneup utilities it signals me this problem:

the peripheral "Nvidia port io control driver" doesn't correctly work

Do you know as solution for this?

A:"Nvidia port io control driver" doesn't correctly work

Hi,
Did you find a solution to this problem? TuneUp Utilities report on an identical problem on my win7 system

9 more replies
Answer Match 56.7%

Hello, Ten Forums!

I was wondering whether it were possible to open the volume mixer instead of the volume control when left-clicking on the volume icon in the tray. At the moment I have it set to open the old classic menu, but not the volume mixer.

So, is it possible?

Thanks.

-Qwerty

A:Is it possible to open the volume mixer instead of volume control

All i see is right clicking to do this. What do you mean by classic menu ?

21 more replies
Answer Match 56.7%

hello all,

can someone help me with my issue.?..My XP was recently re-installed on my IBM laptop and for some reason the sound from my built-in speaker is very low..I adjusted its volume control but still wont work..I can hear it but barely even with a headset..can someone help??..let me know please..thanks.
 

A:computer volume very low yet volume control is maxed

Check the volume control in Control Panel/Sounds.
 

1 more replies
Answer Match 56.7%

Short Story
Wave meter in volume control keeps stopping. I googled it, seems to be a virus. Performed a virus scan, came up with nothing. Did it with another anti-virus program, also showed nothing. Need help. Thanks.

Long Story
So basically, I wanted to watch a youtube video. When I played it, there was no sound. Thinking it was a simple volume problem, I checked the video volume, the small icon on the taskbar, and even went into the control panel to adjust the volume settings. I thought it might be my headphones, but I tried using the speakers and neither worked. I tried doing the voice playback, and then I could hear my voice. I thought maybe it was fixed. Played the video, no sound. At that point I thought it was my sound card. I didn't want to replace it, so I kept trying to look for a better solution. After much frustration, I managed to make my way into the volume control. Start - Control Panel - Sounds, Speech, and Audio Devices - Adjust the System Volume - Audio - Sound Playback: Default Device: SoundMAX Digital Audio - Volume - Wave. I saw that the Wave option was all the way down, and moved it up. After moving it, I could hear the video crystal clear, so I closed all the windows I didn't need anymore. Well, after about 30 seconds, the volume shut off again. I went back into volume control, and the wave bar was all the way down again. I raised it, and closed the window. I was looking for the apply button to become available, for I had assumed that not app... Read more

A:Volume Control - Wave volume keeps stopping

9 more replies
Answer Match 56.7%

Hi
I've been searching for a solution to this volume problem for a while now, but to no avail. I've found others with a similar problem, but no solution. So here's the deal: I just got a new motherboard, and ever since I got it my volume control has been faulty. First of all, all sounds are very quiet, even when all volume sliders are set to maximum. Next the main volme control has no effect whatsoever on the volume of the computer. I can can slide it all the way to the top, or all the way to the bottom, nothing changes. The only thing that makes any difference is the Wave control and it barely does anything. Also, when I put "Mute all"...it doesn't mute. However when I put mute for Wave control, no sound comes out.
All this is incredibly annoying because I often listen to music on my computer, but now I basically can't hear it. To note: I don't have a volume control on my keyboard, or on my speakers, and I know nothing is wrong with the speakers.

If anyone could help, I would really, really appreciate it. Thanks
 

A:Help with volume control-very quiet, main control unnefective

Do you have any other soundcard-like devices like a USB headset?
Do you have the latest drivers for your soundcard installed? Please check the motherboard maker's website.
Did you get some special program with the motherboard drivers that would give you more control over sound than the Windows standard volume utility?
 

1 more replies
Answer Match 56.7%

I'm running windows XP on an old Dell Inspiron 1501 and I'm trying to get my microphone to play directly through my speakers so I can record them both simultaneously. The only answer I've been finding is to tick the 'microphone' checkbox in the volume control playback properties panel, but I don't have a microphone checkbox.There should be a 'microphone' box under SW Synth and CD player but I don't get one apparently.I've downloaded the latest SigmaTel Audio drivers from Dell and despite not having a problem with them before this, I'm inclined to believe that they're the problem. Any ideas?

A:No microphone control in playback Volume Control panel

Okay well of course I find an answer right after posting the topic:
http://en.community.dell.com/support-forums/laptop/f/3517/t/19295458.aspx
http://en.community.dell.com/support-forums/laptop/f/3517/p/18112824/18235810.aspx#18235810

Those two pages detail how to get an Input Monitor checkbox which functions just like the microphone one I wanted (although you can only mute it, not alter the volume). I used Instructional Set 3 from the second page, having to add the 'RecMonitorMute' entry as detailed in the first page and I can now hear my microphone input directly through my speakers.

HOWEVER, I'm still unable to record both the microphone and speaker sound at the same time. I thought recording the 'Stereo Mix' channel with the microphone coming through the speakers would work but it isn't and I don't know why. Any ideas?

1 more replies
Answer Match 56.28%

I recently bought a dell computer second-hand from my friend, who had XP installed on it. It came with a subwoofer and a set of 4 regular speakers. On it, he had installed a form of creative volume control in addition to windows volume. The way it worked was he had the windows volume set to 100% at all times, and the creative volume control around 3% for regular browsing, 10-25% for gaming and 50% or higher for rocking out with music. I recently acquired windows 7 home premium x64 and upgraded my operating system. My soundblaster card has all the necessary drivers and the audio is all hooked up properly, and the only thing missing is this form of volume control. After looking around for the old software and trying a few different freeware and shareware programs, nothing has pulled through for me; any suggestions?

A:Creative sound card, windows 7 compatible volume control?

What exact sound card do you have?

Have you checked creative's website for additional software that goes along with the driver of your card? Is the windows volume not sufficient for you, or do you just want the extra ability for volume control?

If you installed the creative driver, have you checked in the audio control panel that's built into the driver?

1 more replies
Answer Match 56.28%

Hello everybody,
I am new on this website .I recently installed a windows 7 ultimate on my laptop. Lenovo SL500 and I can not control
the volume from keyboard for USB speakers and no bar control volume on screen.Previously I had Windows XP and it work.
If someone out there could help me I really appreciate it.
Thank you.

A:No volume bar control on screen -Lenovo SL500,windows 7 ultimate

Hi and Welcome to the Forums ..... Have you tried downloading keyboard and mouse driver from Lenovo web site ?

3 more replies
Answer Match 56.28%

windows 8 volume control stuck on screen left top corner
Hi,
I have Dell Latitude e6410 recently I upgrade my win7 to win8
now I am facing the issue windows 8 volume control stuck on screen left top corner. and I have no idea how it appear but it can appear when I press laptop volume control once it appear on the screen then I cannot open any other thing so what I do to fix this
issue temporarily by pressing the power button to turn my machine in sleep mode after that I wake up the machine then restart the machine from win8 logon screen after that it work fine but it happen again
any one now how can I fix this problem.

More replies
Answer Match 56.28%

is it possible to have windows xp style volume/audio panel in windows 7? here's my problem.. i have a very old analog tv card that outputs audio through the cd audio... in xp i an unmute the cd audio to get the sound but in windows 7... i am unable to find how to individually unmute the cd audio... anyone can help? thx in advance

A:windows xp style volume control panel in windows 7?

Hello Yeahman,

You might see if right clicking on the Volume icon in the notification area, and clicking on Open Volume Mixer may have an option for the volume control of the CD audio. If so, then clicking on it's speaker should unmute it.

Hope this helps,
Shawn

4 more replies
Answer Match 56.28%

Hi guys,

I'm having some problem with my audio. I have 2 regular speakers. I just bought a new computer (Vista Home Premium installed) and using the same 2 speakers that I had on XP.
Default setting is at 2.1. (I understand that means you have 3 speakers but I only have 2) and there's no setting for "Stereo". And the problem is that the audio doesn't go higher than 50 and the volume is VERY low. I tried so many different forums and couldn't find any results. Can anyone help? Thanks in advance.

A:Windows Vista Volume doesn't go higher than 50...please help

Hi amethystlocke and welcome to Vista Forums

Could you please tell us more details about your computer, specifically the make and model number.

5 more replies
Answer Match 55.86%

Help my windows 7 laptop just keeps rebooting and i cant get to safe mode or recovery what should i do ?

A:system recovery doesn't work and safe mode doesn't work and just keeps reboting

System manufacturer and model?
 
Louis

0 more replies
Answer Match 55.86%

hi, I know there are many in the forum who have the same problem as mine. 
 
my computer was running fine last friday. I tried to start it on saturday, it says it can't startup and need to repair startup. I did run the repair but still can't startup. I tried to use system restore to earlier dates, it still can't startup. The computer has trojan virus before and I tried the anti-malware from internet to kill them. seems that it create more problem for my PC. I have some important files in the computer that I wish I have archived. 
 
wonder if any one can help. thx in advance.

A:can't start up computer-window7, repair doesn't work, restore doesn't work

I'll report this topic to appropriate helpers.
Hold on there...

6 more replies
Answer Match 55.86%

I cannot get Windows Media Encoder 9 to work at all at home, but I have no problems with it at work, so I know I'm not trying to do something with it that it can't handle.

At home, every time I try to convert either an AVI or a VOB to WMV, either using the wizard or the custom settings, it lets me get through it all and then, when it starts trying to encode, it throws up the message:
"Windows Media Encoder has encountered a problem and needs to close. We are sorry for the inconvenience. ..."

It never gives me any more information than this, just crashes and closes. I've tried repairing it through the control panel, as well as completely uninstalling it and reinstalling it, but it hasn't helped.

At home I'm running Windows XP Media Center. At work, where I've never had it crash, I'm running Windows XP Professional. Is there something in Media Center that causes it to crash? Is there any patch I can download or thing I can do to get it to work on my home computer?

Thanks for your help.
 

A:Windows Media Encoder doesn't work at home, does at work

I'm currently having the same problem . I open the .vob file set the output folder , settings etc etc . just as it was about to start converting , WME just stops and crashes . I use windows xp home edition so if your company's xp professional can make it work im thinking it is something in the professional edition which allows it to work not something in our edition that doesnt allow it to work. Are there any alternatives for encoding a video? i dont have much cash right now so i was hoping i might find some freeware alternatives . thanks
 

2 more replies
Answer Match 55.44%

Hi,

I am running windows XP on a Dell Inspiron Mini and have internet explorer popups coming up in the background. Sometimes there are ads with audio messages. Sometimes the sound mutes (wave volume mutes). I tried reinstalling the operating system, which did not work multiple times, until it finally succeeded (I am not sure why it finally succeeded). Even after this reinstallation (which seemed to delete most files from the hard drive) the popups and other antics continued. Malwarebytes' Anti-Malware and Norton Antivirus aren't detecting anything. I ran DDS and GMER as per instructions prior to posting. GMER generated a message after completing scan that said rootkit detected. I clicked OK and haven't done anything with regards to that message. I have included all the log files requested. Thank you for your help!

.
DDS (Ver_2011-06-23.01) - NTFSx86
Internet Explorer: 6.0.2900.5512 BrowserJavaVersion: 1.6.0_15
Run by Personal at 11:45:09 on 2011-07-07
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.1014.227 [GMT -7:00]
.
AV: Norton Security Suite *Enabled/Updated* {E10A9785-9598-4754-B552-92431C1C35F8}
FW: Norton Security Suite *Enabled*
.
============== Running Processes ===============
.
svchost.exe 4
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
svchost.exe 4
svchost.exe
C:\WINDOWS\system32\spoolsv.exe
svchost.exe
C:\Program Fil... Read more

A:Windows XP Interent Explorer popup in background and wave volume control mute

Hi,Please do the following:Download ComboFix from one of the following locations:Link 1 Link 2 VERY IMPORTANT !!! Save ComboFix.exe to your Desktop * IMPORTANT - Disable your AntiVirus and AntiSpyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our tools. If you have difficulty properly disabling your protective programs, refer to this link here Double click on ComboFix.exe & follow the prompts.As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's strongly recommended to have this pre-installed on your machine before doing any malware removal. It will allow you to boot up into a special recovery/repair mode that will allow us to more easily help you should your computer have a problem after an attempted removal of malware.Follow the prompts to allow ComboFix to download and install the Microsoft Windows Recovery Console, and when prompted, agree to the End-User License Agreement to install the Microsoft Windows Recovery Console.**Please note: If the Microsoft Windows Recovery Console is already installed, ComboFix will continue it's malware removal procedures. Once the Microsoft Windows Recovery Console is installed using ComboFix, you should see the following message:Click on Yes, to continue scanning for malware.When finished, it shall produce a log for you. Please include the C:\C... Read more

4 more replies
Answer Match 55.02%

This problem has started in recent weeks (yes, too far back to do System Restore):

When I reboot, if I click on the speaker icon in the Notification Area, it tells me that Windows Audio is not running (and so no media app will produce any sound). However, if I then raise or lower the volume via my multimedia keyboard, Windows Audio starts running.

This is despite the fact that in Services, the Startup Type of Windows Audio is Automatic. So why doesn't it start on reboot?

A:Windows Audio Service doesn't start until I adjust volume

Does Event Viewer have entries related to that service?
Event Viewer - Open and Use in Windows 7

7 more replies
Answer Match 54.6%

I have been having a problem with my computer for a few weeks now. I have Windows Vista on my computer, and have Webroot Virus Scan. When I go to Google's search engine and click on the link, it gets redirected. Sometimes when I turn on my computer, the volume doesn't work at all. Also, sometimes when I turn my computer on, the computer doesn't load, and it says there is a problem with DellDock installation (which I have no clue what that means). I never had any of these problems before this virus showed up. When I run Webroot, it catches the same virus everytime, some type of virus in Java. I have tried researching this virus, but as I said, Google links don't work. Thank you for taking the time to look at my problem.DDS (Ver_10-03-17.01) - NTFSx86 Run by Danny at 16:22:20.01 on Sat 07/24/2010Internet Explorer: 7.0.6001.18000Microsoft? Windows Vista? Home Premium 6.0.6001.1.1252.1.1033.18.3060.1698 [GMT -4:00]SP: Windows Defender *enabled* (Updated) {D68DDC3A-831F-4FAE-9E44-DA132C1ACF46}============== Running Processes ===============C:\Windows\system32\wininit.exeC:\Windows\system32\lsm.exeC:\Windows\system32\svchost.exe -k DcomLaunchC:\Program Files\Webroot\WebrootSecurity\WRConsumerService.exeC:\Windows\system32\svchost.exe -k rpcssC:\Windows\System32\svchost.exe -k secsvcsC:\Windows\System32\svchost.exe -k LocalServiceNetworkRestrictedC:\W... Read more

A:Google Search Gets Redirected; Volume doesn't load correctly, Vista Doesn't start right all the time

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. You can subscribe by clicking the Options box to the right of your topic title and selecting Track This Topic.Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

5 more replies
Answer Match 54.6%

DDS (Ver_2011-06-23.01) - NTFSAMD64
Text of DDS log is as follows:
Internet Explorer: 9.0.8112.16421
Run by rmccaw at 10:56:52 on 2011-07-05
Microsoft Windows 7 Home Premium 6.1.7601.1.1252.1.1033.18.3935.1896 [GMT -4:00]
.
AV: AVG Anti-Virus Free Edition 2011 *Enabled/Updated* {5A2746B1-DEE9-F85A-FBCD-ADB11639C5F0}
SP: AVG Anti-Virus Free Edition 2011 *Enabled/Updated* {E146A755-F8D3-F7D4-C17D-96C36DBE8F4D}
SP: Windows Defender *Disabled/Outdated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k LocalService
C:\Program Files\Realtek\Audio\HDA\RtkAudioService64.exe
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Windows\SysWOW64\svchost.exe -k Akamai
C:\Program Files (x86)\AVG\AVG10\avgwdsvc.exe
C:\Windows\system32\lxdrcoms.exe
C:\Program Files\... Read more

A:Start menu items empty/ can't find volume control following Windows 7 repair virus

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.Please take note:If you have since resolved the original problem you were having, we would appreciate you letting us know. If you are unable to create a log because your computer cannot start up successfully please provide detailed information about your installed Windows Operating System including the Version, Edition and if it is a 32bit or a 64bit system.
If you are unsure about any of these characteristics just post what you can and we will guide you.Please tell us if you have your original Windows CD/DVD available.If you are unable to perform the steps we have recommended please try one more time and if unsuccessful alert us of such and we will design an alternate means of obtaining the necessary information.If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review your topic an do their best to resolve your issues.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply'... Read more

15 more replies