Tech Problem Aggregator

Is a G6 1000 series compatible with a g6 2000 series

Q: Is a G6 1000 series compatible with a g6 2000 series

I have a Pavilion G6 2000 series, I bought this laptop 2nd hand it has a generic cd/dvd bezel that does not stay on. I have found a G6 1000 bezels but I need to know if it will fit before I purchase a replacement that may or may not fit. Help????

More replies
Answer Match 90.72%


A:Ams Tech Rodeo 1000 Series No Start Up

Hi CADMAN66 - welcome!

What Operating System are you running? Do you have a Startup disk that you could put in the floppy and try to boot from?

1 more replies
Answer Match 89.88%

Recently, I mistakenly erased some drivers from my Averatec Series 1000N, 10.5 inch computer. Now, can not accessed my computer.
Can anyone please help me. I have struggled with this for manyhours.
The Averatec computer originally came with Windows XP. But, I upgraded to Vista. In doing so, I could not get on the internet.
Then, started trouble shooting and really screwed things up.
I can get several Windows such as BIOS and Safe Start, etc. But, just cant boot up.
This computer does not have a CD Drive, so can't install a disk.
I tried programing a Thumb drive with Rufus to try to recover, but that  failed.
Is my computer done for?
Any help will be greatly appreciated.

More replies
Answer Match 86.52%

I have a set of HP Z210 Workstations with E3-1245-V2 Xeon Cpu's, SSD boot drives and varying sizes of memory from 8-16GB 1600Mghz DDR3 ECC. We use Windows 8 Enterprise for these machines, with Hyper-V enabled.
We get regular driver failures from the 2 sets of USB controllers on the machines (Mainly and issue for the KB & Mouse) that can only be resolved with a full power down (not restart) and a power up. This happens at least once every 1-3 days per machine.
I had gone through the HP support, but they have advised this isn't an issue on their side, and I had agreed all along. I was just hoping to get some traction by notifying them. Anyway, after a lengthy trouble shooting session, we found that once Hyper-V
was enabled, the fault arose.
As it was an Intel chip, they I asked them. They advised that on Windows 8, the drivers are supplied via windows update and that it was not their issue.
So, how can I get this resolved? Not through HP or Intel, surely through MS? Maybe not. Disabling Hyper-V is not desired as I the teams with these PC's are developers and require local visualization. Also, we have templates ready for Hyper-V, I don't really
want to remove Hyper-V and use Virtual box or VMWare workstation. but I am at wits end with the fault and lack of help from the vendors.
Please help.

A:Hyper-V causes Intel(R) Series/C200 Series Chipset Family USB Enhanced Host Controller driver to fail

I have found a work around for this fault with the USB failure - ENSURE YOU POWER  THE MACHINE OFF - DO NOT RESTART.
Its almost like the restart doesn't initialise the device correct, thus causing a failure. 

3 more replies
Answer Match 85.68%

With the new year, we start a fresh discussion for members to share their order and fulfillment experiences.
We are retiring the 2014 thread    Anyone having an active discussion there can find it here.
The 2012-2013 tread  can be found here . 
Here are some common points of frequent discussion:

How to get a system fast: Buy an in-stock standard configuration from Lenovo or a Lenovo Partner in your area. Customized systems take longer.
Avoid Credit Holds - ensure that BOTH your bill to and ship to addresses are listed with your CC bank before ordering
Lenovo will not bill your card until order ships - an authorization charge hold to check for available balance may show up when order is first placed.
Estimated ship dates are based on default lead time and can vary from what was displayed on website.
In the US and Canada, Lenovo utilizes UPS for new product shipments
Orders may ship before the Estimated Ship Date
Orders may enter through Alaska and pass through Louisville, KY before traveling on to final address
Cancellation requests may take up to 2 days to process
Requests to change configuration or other aspects of the order may require the order to be rebooked.
Lenovo does not accept payment via international credit cards, except AMEX.

We hope you enjoy your new ThinkPad system when it arrives!

More replies
Answer Match 85.68%

I know it's been posted a s#!+load of times, but I figured I'd go ahead and get something straightforward- all the other posts have been in jungle English, and haven't included the proviso I'm looking for.

Anyways, my situation is that I bought my X1900GT from Newegg around Christmastime, as a present to my ainsel (ownself, for those not familiar). I've been getting kind of disappointed in it recently: It underperforms and often crashes on STALKER:Shadow of Chernobyl and some more modern games akin to it. It also runs hot as Hades.

I'm in the market for a new card. I'd like to go DX10, but the late-production DX9's (7900 series) seem to outperform a lot of the more affordable DX10 offerings (8600 series), especially at higher resolutions, due to the 128-to-256 bit difference. I could splurge and go for an 8800, I suppose, but it would be a hit to the wallet and I'd have to postpone :cough: "Aruban Getaway 2008".

So: I don't want to pass up on the new line of DX10-only Games for Windows (Age of Conan, Crysis, etc.) that have been hyped to all hell just because I stuck with price and performance instead of currency and novelty. I need some help deciding. Then again, I could always wait until DX10 becomes the vogue and buy a cheaper, but better card then.

A:Price v. Performance in 7-Series + 8-Series: Advice Needed

Keep what you got and see what's comming next. I have a 8600GT as a stopgap until something better comes out. There has been talk of a Nvidia 256bit card to fill the gap between the 8600's and 8800's. I can't fit a 8800 in my case, if I could I would just get the 8800GTS 320mb now. If I were you, wait for the game to upgrade instead of upgrading and waiting for the game. Your X1900GT is no slouch either.

5 more replies
Answer Match 85.26%

I have Dell Inspiron 15R SE 7520 and its HDD's some sector gets corrupted.
So Intel's 540s series SSD is compatible with this laptop ?

A:Inspiron 15R SE 7520 is compatible with Intel 540 series SSD

Yes -- any standard 2.5" SATA SSD will work.

1 more replies
Answer Match 84.42%

hello, can you give me a list of compatibles graphic cards as i need to improve graphic for i need to change the power supply unit too ??? the on-board graphic cannot support csgo and dota2 on medium quality video. i wanted to add new graphic cards as i can play on higher resolutions.  Thank You

More replies
Answer Match 81.06%

I want to invest in a SDD to replace my dying westgate harddrive. I've set my mind on Corsair but I want to know the difference between the eXtreme series and the Performance series ( According to the website, X SDDs reads a little bit faster, but the P series writes a little bit faster. The only other thing is that the P series is around £100 cheaper!

So is the X series worth the extra £100?


More replies
Answer Match 81.06%

hey there

I have a question, what is a better video card to get?
6800 series or the x800 series?

the graphics card that i have in right now just isnt cutting it for me, NVIDIA GeForce FX 5700 I mainly play HL2, CSS and Doom3. I was woundering what card is gonna give me better fps for those games. i have the specs of my comp here (vv) and i wanted to kno what card(s) would run great with the things that i have.

the specs of my comp are:
Video card:NVIDIA GeForce FX 5700
mobo:GA-8IPE1000 (2.0)
processor4 3.0 Ghz (OC'd to 3.4 Ghz at the moment)
PSU: 420 thermaltake ATX 12V
Cooling: prestock (gonna change very soon)
RAM: Genaric PC 3200 mismatched
HD: Maxtor Dimond MAX+9 160GIG

What do u suggest i should get?

A:X800 Series Or 6800 Series

12 more replies
Answer Match 80.64%

I just tested an Nvidia 9300 GS card with a Intel Corei3 HD 2000 graphics system. Here is the windows experience index scores I got :

Nvidia 9300 GS :
Base Score 3.9

- Processor : 7.1
- Memory : 7.5
- Graphics : 3.9
- Gaming Graphics : 5.1
- Hard Disk : 5.9

Intel HD 2000 :
Base Score : 5.2

- Processor : 7.1
- Memory : 5.9
- Graphics : 5.2
- Gaming Graphics : 5.8
- Hard Disk : 5.9

My questions are :

When using Intel HD graphics, it reduces the score of my Ram! How is that possible? It checks the speed of the ram. Not the size (i think). Intel graphics take some of the ram space but how can that effect the speed?

From both of them, what will be the good choice?

A:Nvidia 9 series or Intel HD 2000?

I'm pretty sure the Wei takes into account the amount of available ram in addition to the speed which would account for the reduction in the wei.

Also upon checking passmark it would appear that the Intel HD graphics does out perform the 9300 gs although I would need which i3 processor you have to confirm

i3 G3D rating is 200+
9300 GS G3D rating 138.

out of the two I guess you should stick with the integrated graphics since it is better unless you need the extra Ram that is uses

1 more replies
Answer Match 80.64%

Like the idea of a small and really portable laptop. Lots in Japan but not here, maybe because they are too small for american fingers to type on.
One exception is the Fujitsu p-2000 series. As I typr two fingers probably will be OK.
Does anyone have experience with this computer.


One use would be for downloading of digicam in the field. Unfortunately the screen is about 9" long but only 5" high. This limits the size of viewing a portrait picture. I know I can rotate the picture but if I want to use something like photoshop2.0 it gets cumbersome.
Question: can I rotate windows 2000 90 degrees and view everything sideways?

More replies
Answer Match 79.8%


Enjoy fast and flexible music and video playback with Microsoft® Windows Media® Player 9 Series. Over 120 new features, including Fast Streaming, quicker startup, and smart jukebox features make this the best Player yet.
System Requirements
Supported Operating Systems: Windows 2000



More replies
Answer Match 79.8%

Hello , I upgraded some time ago to a intel i3-2350m processor.According to the manual the highest i can go is Intel Core i5-2450M I found some post regarding an processor upgrade for another pavilion g6 laptop where upgrading to a highe processor i7-3632QM. Since the motherboard is identical (Model 1840 (u3e1) bios revision f.26 ) , will this upgrade work for me also ? Thank you !Alex

More replies
Answer Match 79.8%

Hi Sir My Laptop hp 2000 series 2121tu wirless not working, how to turn on wifi on my Laptop

More replies
Answer Match 79.8%

Are the bottom cases on all 17.3" g7 2000 series laptops interchangeable? I have a 2275 dx and need the bottom case.

View Solution.

A:Are the bottom cases on all 17.3" g7 2000 series laptops int...

Hi, Maybe not all because HP can have 1000 products from 2000 to 2999. Your machine uses base cover part number: 708037-001 There are 93 models/products use same part You can use base from the above 93 models/products for your machine. Regards.

3 more replies
Answer Match 79.8%

hello guys, im looking for this modem usb drivers for windows vista x64


More replies
Answer Match 78.96%

Hi, so i wanted to make a new partition, only to find that HP had already used them all up, so i tried to follow your guy's make a logical partition guide, however when booting into the partition manager, it said that it doesn't support windows server

how do i fix this? (all specs should be listed in the specs thing)

A:HP 2000 series notebook can't make logical partition

Welcome to the forum.

Please post a screen shot of Disk Management in your computer.

Also, just noticed that you list Malwarebytes as your antivirus program. Malwarebytes is not an antivirus program. You should reallyinstall one.

8 more replies
Answer Match 78.96%

Hello, gentlemen

I know it might sound totally ridiculous, but as i faced this issue myself i went to look it up in the web and stumbled on this topic ATI driver support for windows 2000 (which is closed by now, and which is why i brought it up again), and i thought... not even put up my hopes much, just thought.. is it ANY possible to patch ATI Catalyst version that supports Radeon HD4000 series video adapters to get it work on Win2k?

Is there any way actually to substitute, emulate the drivers or cheat on Win2000 to get at least 85hz, 64-bit colour and 800x600 res using this adapter? 'cause that's the only prob i'm having so far, the rest is ok. And i love Win2000 and i want to use it for x86 based old applications. Not XP (even though its good enough), and only i know why. So that's the reason i want to make it work so bad. By the way, i wanted to contact the initiator of this idea himself directly (crjdriver), but since "there is a problem using PM for first time posters" i wrote in here.

P. S. Dunno if that contributes anything to the story above, but i have onboard integrated HD4200.

A:ATI Radeon HD4000 series drivers for Windows 2000

8 more replies
Answer Match 77.28%

This question might be stupid or u might not be able to do this but here it is....

My friend wants to know if the SONY BLACK 16X DVD+/-RW BURNER DUAL LAYER will fit in his 2000 Compaq Pesario Intel celeron 1200MHz 1.20 GHz, 256MB ram memory, 40gb ultra gma hard drive 12 speed dvd rom drive. Model# 5310US(for the computer)

Here is the link:

Please reply with an answer as soon as possible...

A:Will this Sony 16X DVD+/-RW BURNER fit in my friends 2000 Compaq Pesario 5000 series

6 more replies
Answer Match 76.44%

Hi I have some Toshiba Tecra M10 series but for some reason the laptop no longer works with a battery attached and just get flashing light on the laptop. It works fine with power but won't swatch on at all with a fully charge battery, I have tried many and it's not the battery. I have taken the laptop apart but can?t find anything that is wrong. So it must be the battery and or charge circuit, resisters, gone on the M10.

Anyway I was looking at a motherboard replacement. On looking about it appears that Toshiba released a M10 and a A10 series. They both look about the same to me with the same fittings but to be sure, can anyone tell me if a A10 motherboard, is the same as the M10 motherboard?

Maybe someone who works with these day in day out hopefully will know. Just don?t want to buy and A10 if it?s not compatible with M10 case and fittings.

More replies
Answer Match 75.6%

When I insert a PC Card in my Compaq Presario 1200-series laptop computer, I receive a message that indicates MTD-0002 hardware is detected. Also, an unknown device named "PCMCIA MTD-0002" appears in my Device Manager.

This is my problem, exactly from the Q274509 in the Microsoft Knowledge base. When i attempt to do what it suggests to fix, (To resolve this issue, disable the Sound Blaster setting in the Phoenix BIOS, but do not disable Onboard PCI Audio in the Phoenix BIOS. ), I find that neither the Sound Blaster Setting nor the Onboard PCI Audio setting exist in my BIOS.

What am I to do? I cannot connect to the internet with my laptop anymore because my modem doesn't work with the laptop!!! Please help me either find this setting (if i just didnt look hard enough) or find a way around this. Either and/or Both would be much appreciated.

Help Please!!!

A:PCMCIA Cards Are Not Recognized in Windows 2000 on Compaq Presario 1200-Series Laptop;EN-US;q274509

is the link to the microsoft knowledge base site that explains this problem.

2 more replies
Answer Match 75.18%

Any Idea or ETA for Lenovo Ideapad Y Series W/ New Nvidia Gtx 10 Series ( 1060 / 1070 / 1080 ) ? or New Intel i7 7th Gen Processors??

More replies
Answer Match 75.18%

I'm hoping to get some info from anyone that has some good stats on these cards.. I've been outa town for 4 days and wasn't near my freind (MY PC) over the release of the New GTX 200 cards.. so sadly I didn't get to see all the info and the Benchmarks for it.. Other than Kingpin's Crazy Vantage Score.. Other than that I just got home and I'm wanting to get the Scoop on these cards. I've been reading a little tonight tho.

Also I'm hoping for some info about the new ATI 4870 and 4850, they are looking VERY nice, and looks like ATI might have finally made something that can actually compete with Nvidia this time around.. (Nvidia's had the Enthusiasts Market for a good Year and a half or so IMO) but I've read only a little about them, from what I've seen they look good but if anyone has some info or links to Info about them, then please share. I kno most the ATI 4000 benchmarks that are out now are not completely trustworth cuz the cards aren't officially here yet. But please post some links and info if you can..


Also What should I do. Buy a cheap or Cheaper used 8800 GTS 640 and SLI them.. or sell mine and SLI 2 8800 GT (G92)'s after price drop becuase of the new series.. or should I try and hold out and get a 260, or should I get a 4870...??

ATI looks good, and now I'm in a Fickle as what I should do, I knew what I needed to do until I read about there new release comin.. now I'm shattered and need to wait for more info.. (I take in a lot before I buy things) li... Read more

A:GTX 200 Series vs ATI 4000 Series...

If you want 8800GT's, the prices have dropped to about $150 average on newegg which is great considering i got mine for $250. Personally, I'm against SLI, but if you're for it and would have to make a purchase now, go with 2 8800GTS g92 as they're averaging about <$200 (MSI's 8800GTS is on newegg for $177) and they provide some performance over the 8800GT. Since the 9800GTX is basically the same performance as the 8800GTS but more expensive, then forget that.

If you can wait a while to make a purchase, I've heard that the newer 9800GTX+ will have higher stock clocks that will deliver better performance with its newer drivers too, and this card comes out in mid-July. It's supposed to be priced around $230 and it's chip is built on 55nm process. This card sounds attractive, but we'll have to wait for solid reviews of the card first.

ATI... I don't like them, so I'm sorry but I can't tell you anything about them.

13 more replies
Answer Match 75.18%

I'm getting really pissed off for the newer games. Some of them requires an Direct X 10 video cards to run it properly. Do you guys think 7900 SLI can run newer games smoothly such as Lost Planet? On my computer I test my system requirements and it failed for recommendations. It says that it requires Dx 10 cards to play smoothly.

A:7 series SLI versus 8 series (No SLI

I'm sure you will loose some of the gee wiz graphics not using a DX10 card but so far most game makers have been making games that use either DX9 or DX10. As far as lost planet is concerned here is whats posted on their official forums as supported vid cards.

The following is a list of video cards that our R&D labs have tested in conjunction with NVIDIA and ATI, and have been confirmed to work.
NVIDIA (DirectX 9)
GeForce 6600
GeForce 7x00 series
GeForce 8x00 series

NVIDIA (DirectX 10, requires Windows Vista)
GeForce 8x00 series

Windows XP 32-bit Driver: ForceWare 162.18 beta (July 5th)
Windows Vista 32-bit Driver: ForceWare 162.22 (July 11th, 2007)
Windows Vista 64-bit Driver: ForceWare 162.22 (July 11th, 2007)

ATI (DirectX 9)
Radeon 1650
Radeon 1800
Radeon 1950

ATI (DirectX 10, requires Windows Vista)
None currently.

For R600 (Radeon HD2900, etc.) cards there is a hot fix from ATI:Click to expand...

the 7900 is showing in that list so it looks like it should work

3 more replies
Answer Match 73.92%

How do i find the driver for Intel(R) Pentium(R) processor N- and J-series / Intel(R) Celeron(R) processor N- and J-series EHCI USB - 0F34

More replies
Answer Match 73.5%

will the 9 series make the $220 8800gts drop to something like $100 or will it still be $200?

A:Will the 9 series cards make the 8 series cards cheaper?

eventually, and then the 10 series will do the same to the 9 series, rinse and repeat. basically as long as its one of the fastest cards the gts will be expensive, when it becomes obsolete (relatively) its price will drop.

from the question i assume you are looking to upgrade, if you want to only spend $100 then i'd say your best bet is an OCed 7600 GT, lotsa bang for your buck, i can run FEAR with pretty high settings with just one of them.
but really, what are you looking for?

12 more replies
Answer Match 68.46%

I have a Netgear DG834GT wireless router which works fine with my PCs which have G series network adapters. But with my laptop with an N series network adapter the signal disconnected every 20 seconds then reconnected; this was only a problem using it at home – everywhere else it connected well. I solved this by using a G series PCMCIA when at home. So far so good.

Now my wife has been given a work laptop which has the same problem. She can’t use a PCMCIA because the laptop has been set to stop her installing the software. So… should we get an N series router? Is there any reason it wouldn’t let us both work PCMCIA-free? And if we should go ahead, any advice on what specs I should get or avoid?

A:Replacing G series router with N series router

16 more replies
Answer Match 68.46%

Is the nVidia 4200 ti series older than the nVidia FX series?
I am pretty sure the nVidia 4200 ti series is older than the nVidia FX series, but am not certain. Thanks in advance for any responses.

A:nVidia 4200 ti series vs. nVidia FX series

7 more replies
Answer Match 65.94%

So Dell made a really terrible decision.  They have a transparent strip in the power button for an LED light to indicate if the power is on.  A power indicator is a given in any laptop, no matter how cheap it is.  However, Dell in all of it's genius decided to not include an LED bulb on laptops up to the Inspiron 7000 Series, despite leaving a transparent slot for it.  Seriously, what happened to this brand?!?  Do children make these laptops now?
I want to fix this, as my laptop is no longer returnable and a power indicator is absolutely necessary.  So the only thing I can think of is replacing it with one from the 7000 Series somehow (with some help probably).
This is a Dell Inspiron 5559.  I also have an Inspiron 5547.  Not sure which exact 7000 model I should get the part for...
Are they compatible?
Is there an easier way? Like how Fn+H turns on the hard drive indicator?

A:Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board?

The systems use different case and mainboard designs -- and may even be made by different companies.  The answer in all likelihood is no.
I don't think Apple has produced a Macbook with a power indicator -- the PC vendors are playing follow Apple.

1 more replies
Answer Match 60.48%

Hey everyone. I currently have a GTX 580 and I want to upgrade that. I was going to get a GTX 770 but I'm now considering waiting for the GTX 800 series. Is it worth waiting for the 800's and when do you think it will be released?

A:GTX 800 series?

Well supposedly it's coming next year, but since crystal balls don't exist who knows exactly when, maybe in Q1 maybe not, maybe way longer,or if they'll be delayed even further, or how good they'll really be, or if they'll have bugs, or how much they'll cost. If anyone really knows at this point they are not likely allowed to disclose details beyond what I'm sure you've searched on Google otherwise they'd lose their job; and even what may be known now may change as changes and delays happen all the time.

In the end, it's up to you, if you need a new or better card now, buy now, if you want to wait there will always be another generation or series in the works, if the wait is confirmed to be short then sometimes waiting a bit is not a big deal, when the wait is longer waiting may not make sense.

1 more replies
Answer Match 60.48%

I GOt a think pad I series of ebay for 10 because it was good for parts/may be fixable i want to start rebuilding laptops its
model: 2611-410
CPU: pentium MMX,Speed unknown
Ram: Unknown, 128+ suspected (switched for a 128mb ram chip i had not quite sure if its in the right place)
Hard Drive: UNknown( dont care at the moment my goal is to get it to boot a linux live boot cd)
screen Size: 12inch
Optical drive: CD rom, possibly RW
power adapter: None(used one i had laying around)

Those are from ebay listing... except for things in brackets.

But to the problem at hand i thought ill try and put in 128mb ram throw in a linux live boot cd that only needs 16mb but when clicking power button i see nothing on screen just black my first thought because i could hear stuff was maybe the screen is dissconected but im not sure tell me if theres anything i need or if i need to open up and look around...

A:think pad I series.

a quick look at the rams the 2 original were 32mb and 64mb but does anyone know what to doo?

3 more replies
Answer Match 60.48%

Hey guys,

Hope you're all well, been a while since I was posting. However hope you can help me here.

I recently purchased a new ATI R9 200 series. However when outputting through HDMI the speakers make a 'clicking' sound. It's not rhythmic or in time with anything on the screen. I have the latest drivers installed.

Anyone have any ideas?



A:ATI R9 200 Series

Try adjusting volume settings. I had a similar thing with my R9 285

3 more replies
Answer Match 60.48%

My HP PSC 700 Series All-in-one printer shows "HP printer disconnected". I have uninstalled and re-installed software, but it doesn't help. Does anyone know if there is a FIX for this problem?

A:hp psc 700 Series All-In-One

That so called software, Isit packaged with the printer?
If not, maybe u have the wrong drivers installed or the drivers aren't up-to-date?

Hope that Helps~


1 more replies
Answer Match 60.48%


The CD-ROM of my Mainboard can't be read by windows 7.
What can i do?

My mainboard is ASUS P45 and the CD-ROM is P5Q Series

A:P5Q Series

You could go to the motherboard web site and download whatever you need. What exactly are you needing that Windows 7 can't read?

9 more replies
Answer Match 60.48%

hi people, my miss has only gone and brought a eee pc series (asus 701) with out even telling me she fort she was getting a bargin for £60 second hand, wot a fool she is, ive got it in front of me now and they installed windows xp2 on b4 they sold her it, ive done a driver scan and theres 96 updates that need to done, i havent got a clue if its a clone copy or anything i was thinking would it be best if i just did a clean installation of windows xp3 (boot from usb witch i havent got a clue how to do) or shall i just let it update its self ? PLEASE HELP . she brought this for my 8 year old daughter for Christmas aswell. ive told her to get the money back but she wont. THANKS IN ADVANCE GUYS, (and another thing is i have no usb cd drive to attach to it to boot windows from) it all boots up fine its just all these update what need doing.

A:eee pc series

If it currently has Windows XP SP2 installed, you need to install the SP3 upgrade before you do a custom scan at Windows Update/Microsoft Update.

A custom scan will probably display over 100 post-SP3 high priority updates.


2 more replies
Answer Match 60.48%

I know.......another question about which gfx card...blah blah blah.....
Sorry guys, but I just have to ask...
I have my eye on a 'Gainward GeForce 4 PowerPack Ultra 750 128mb 8x xp Golden Sample TI-4800SE' which I can get reasonably cheap £88 (UK)
Is this a good choice (am currently using a GF3 Ti200 64MB) or should I look to a mid range GF FX 5 series, or even a Radeon in the same sort of price range.........trying to get the best for as little as possible, shortage of cash...
I like to play UT2003/C&C General/Mohaa + Spearhead and a few others.
Using XP Pro-Abit KR7A-512MB DDR.
I would be very grateful for your thoughts/opinions...........even if you just say "use Google !!!" etc.......................

A:GF4 or FX series ?

13 more replies
Answer Match 60.48%

I've had my P50 for a while now, and I keep coming back to the Lenovo website from time to time, looking at various accessories that I think I'd like to pick up.  However, Lenovo still doesn't list the P-Series in their drop-down menues when trying to tell them which machine you have. Are we supposed to just tell them we have W-Series, and hope we're not asking for a Docking Station, that won't be compatible between the P and W series systems? Does anyone else find it odd, that Lenovo is "hiding" things about the P-Series laptops? Thanks for the input!

More replies
Answer Match 60.48%

Hope someone can offer some insight. I see where many, if not all the brands, Asus, MSI, etc. have guys asking for vBIOS updates in various forums to solve problems with display. What is the general incompatibility issue? Any light that can be shed is appreciated

A:AMD R Series GPU's

EClyde said:

Hope someone can offer some insight. I see where many, if not all the brands, Asus, MSI, etc. have guys asking for vBIOS updates in various forums to solve problems with display. What is the general incompatibility issue? Any light that can be shed is appreciatedClick to expand...

It depends on what you are referring to, there is not real issues with the R series GPU's in terms of display output. Most of the associated problems people are having involve a few things:

Some of the 4k monitors (The AOC for instance) use a very odd way to refresh which caused the display to flicker on the R9 series GPU's which was resolved in a recent patch.

Some high refresh displays using DP

and some others

However I would not worry, most of the problems if any are fixed via patches and catalyst revisions. If the manufacturer has to update something like the this its normally involves something like with their own software or certain things in environments not working together properly. I would not worry, I have done nothing to my PowerColor R9 290X trio and they all work great.

4 more replies
Answer Match 59.64%

2 days ago, my computer was running nominal and there was no problem until i downloaded TAP 32 and SecurityKiss. I have a bad habit of force shutting down computer by the power switch. When I rebotted, I had a BSOD. So That was that i chkdsk /p and fixboot. When I Reboot, i get the windows defender error, the rpc error and another error. Up to today these are the problems i faced:

-Software errors
-Taskbar missing or if its visible it doest show the running programs
-Audio Doesnt Work
-Error 711 that deals with internet connection
-Error 1048
-I cannot get connected to some servers like i used to do
-System Restore cannot start

I want to fix this as quick as possible because i have very much important documents to process in 2 days time. Thanks In Advance.

Dell Insirpon 1501 (June 30, 2007)
os: Windows XP SP3
Processor: AMD Turion
Graphics Card: ATI Raedon
HDD: 160GB
RAM: 256KB

A:Series Of Errors

Hello and welcome to TSF.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a

Having problems with spyware and pop-ups? First Steps

link at the top of each page.

Please follow our pre-posting process outlined here:

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

1 more replies
Answer Match 59.64%

Information about video cards AMD Radeon HD 7000 | System Diary Technology News Blog

- all change..!!

A:AMD 7000 series on the way..

sounds like i'll be waiting on one of the real high end 7900 series

Im not going to get a new gpu for a while anyway ,Im waiting on the Bulldozer cpu

Then a new card and the board im useing i wonder how much more it is going to be improved

1 more replies
Answer Match 59.64%

Hi all, I don't know if it is even possible anymore, but back in the day of the T40, the expresscard slot (or PC card slot?  I don't know what the difference is, if any) could hold many things, including a GPU.  (I even remember discussion of this back when the T510 was new.)  What can the modern Expresscard slot hold?  Can it still effectively mount a GPU?  A card reader isn't necessary with the SD slot underneath it. What do you guys use it for on you laptops (preferably P series, but any would do.) Thanks.

-----------IBM T40: XP PRO SP3, 14.1" 4:3 display, 512MB DDR RAM, 40GB HDD, ThinkLight, DVD.Lenovo Ideacentre H215: AMD Athlon II X2 215, 500GB HDD, 4GB DDR3 RAM, 64-bit Win7, AMD 760G.

More replies
Answer Match 59.64%

hi everyone i have this all in one printer hp c4200 series ok
what happen is that the 75 tri color cartridge have damage and it appear a msg
cartridge is missing or not detected and what i want to know is theres a way to remove the msg from the printer?? so i can use the black 74 cartridge

the msg does't let me press any button from the printer

A:Help hp C4200 series???

Which model number in this list is your all-in-one printer?


The printer will not work with only the black 74 cartridge installed. The tri-color 75 cartridge has to be there also.

A cartridge doesn't get damaged while it's inside a printer. It can only get damaged by improperly handling it while unpackaging it and installing it.

If the tri-color 75 cartridge is damaged, then you need to replace it.


3 more replies
Answer Match 59.64%

Aren't some of the Intel 845 graphics processors based on the AGP platform?

A:845 Series Question

Yes. But the AGP slot only runs at 4x. That wont be an issue with an older card though.

2 more replies
Answer Match 59.64%

I bought an I Series 1171-91u 8 years ago.  I tripped over the cord while I was charging my battery and busted to power input off the motherboard.  I got a new motherboard from Impact Computers and although it is a 1300i, I am unable to determine which one it is.  I tried to use auto detect from Support, but it would not detect my system. How do I get that number?  How can I find out which one I have so I can update my BIOS, I am having some problems and I can't get any good support from the supplier.  Thanks in advance.Samain 

A:How to tell I Series Mobo

Hi Samain, Welcome to the forum!  Sorry for such a late reply, but there should be a label somewhere on the systemboard, generally near the ram slot that will have a FRU number on it.

T61,T42(x2)T41,T40(x2),R40,T30(x2),T23(x3),T21,T20,X20,A31,A21M,600/E/X(multiples of each),770X,i1400(x2),760XL,760ED(x2 w/base),380XD,755CD,750P,360P,365X,560X,701C/CS,730T,PS/Note

1 more replies
Answer Match 59.64%

Rumor has it that XP cannot print to Laserjet 4 by HP. Is this true?

A:XP with Laserjet 4 series

looks like they kinda work.

from HP's support site.

1 more replies
Answer Match 59.64%

I get a system beep lotsa times when i boot up. But after some power off and power on again and starts.... and the graphics card works great !

MSI has also included a MSI LIVE! Update utility that i used..and guess what ! it found a new bios version for my VGA Bios driver....and it flashes it ONLINE ..and asks me to restart...and when i go to the LIVE update lists the same update it havent been installed !!! arghh...and msi dont provide with info on how to do this manually either.

Also...i have thought of it could be my chipsets drivers... but how do i know what kind of chipset i got ?

You can pick from AMD (nope) INTEL (nope) and the VIA Chipsets drivers.... i have a MSI Motherboard with a Intel P3 Processor...thats about i know.... so which one is da right one ?

Try and help me if you can hehe

A:MSI Geforce 4 MX 420 Series


I don't have any direct answers, but I would like to suggest that you run dxdiag.exe thru 'start'>'run' (just type dxdiag.exe in the box) & also download "Fresh Diagnose" from for a program that will give you LOTS of info about your system & the components installed. :grinthumb

Once you determine what you have: go to the mfgs. websites & check for patches, fixes & updates for the specific programs/components you have.

HTH, (hope this helps)

1 more replies
Answer Match 59.64%

How many of you are running AMD 7000 Series in your gaming PC's. I will really appreciate if you people can tell your benchmark scores cause in reviews they use latest possible hardware which not everyone runs so can't really rely on them.

I've read loads of reviews about these and come to conclusion that 7870 is best bet at the moment to go for as 7970 is way too expensive.

Moment of truth, shall I ditch my 5770 crossfire and buy one 7870 or wait for prices to go down further.


A:AMD 7000 Series

I would hold, the two current series out right now Nvidia's as well.
These are stepping stone improvements. I honestly believe the next generation will come quickly (fall/winter)
and will be a much larger improvement in real world performance.

The best numbers to look at would be at hardware compare where they just take the actual features of the card and put them head to head for you.

Honestly the 7970 is a serious beast it actually blows away my current card that handles bf3 maxed without complaint. Which is actually kind of my point too though your crossfire rig should be getting pretty good frames even if it's a middle card that kind of sucks at anti-aliasing. I'm guessing your overall experience gaming is not too different from mine right now. (see my specs)
So why bother getting in a rush?
I could be wrong about this, but I am seriously expecting a 7 series nvidia and a 8xxx ati before the end of the year.
...and at the moment I don't see the actual need to upgrade considering the list of games on the horizon and the fact most of them have rather middle range recommended reqs.

The new bioshock I think is among the heaviest reqs of any games comming out before the end of summer anyhow.

Normally just to be fair I would recommend a nvidia equiv for you.
Right now there sadly isn't one, even the gtx680 is slower not by a huge amount but it is slower, and more expensive. So unless you wanted to play with some heavy physx games I don't really see why you would want n... Read more

7 more replies
Answer Match 59.64%


sometimes, 98 opens fine, 1st time

more often, you get: when switch laptop on, you just get no-where, with irriatating messages:

'error' then it lists these numbers: 00173

at the bottom offers 'ok' or 'cancel'

neither of which get you to 98 anyway
pressing cancel lists those numbers again, with NO options to exit or cancel, etc, & no mouse (mouse is on 1st screen mentioned)

doesn't respond to ctrl, alt delete at this stage have to switch off manually

if you slect the 'ok' (instead of cancel) at the 'error' prompt (the 1st screen which comes up after switch on) it gives you a date check screen, & time etc
& only 'ok' or 'cancel' at bottom

if you select 'ok' it re-boots then offers yet another screen (still no 98) thsi one says: 'off' with an arrow pointing towards word 'on' to which I assumed it is asking me to switch off then on again? no mouse here either

if you switch off, then on again, THIS DOES ENTER 98 OK

how do I stop this silly error sequence prior to 98 screen? by the way, no probs running windows I don't think it is the o/s

when you 1st switch on, top left screen says: 064960ok
with 192 directly below

words: ibm top rt & thinkpad bottom left

but even if you shut windows down correctly it brings the error messages above, sometimes with just 192 but oth... Read more

A:ibm thinkpad 600 series

6 more replies
Answer Match 59.64%

I need to order a part for my desktop p6115y Pavilion tower. I have the product number and SN number but no where can I find the series number in order to order the part. What is the series number? I would truly appreciate this. I need to order a power on/off switch.thank youlinda

View Solution.

A:hp p6115y what series is it?

Hi: Here is the parts list for your specific model PC... I don't see a power on/off switch, unless it is the Power LED holder assembly Part # 499769-ZH1  Here is a link with a picture so you can get an idea what the above part is. I'm sure you can get it cheaper elswhere though.  HP sells the part for $35.00. HP parts store...

3 more replies
Answer Match 59.64%

This is my first laptop and I'm having trouble. Okay, first off i got my laptop connected to my router and it worked fine for about 2 months. Then, when i take it over my mom's house and try to use her router to connect to the Internet, but it doesn't work. So, i come back home thinking i can get back on the Internet, but i can't.

Please help me.

Things gone wrong:
1. wireless connection wizard says i can't create a wireless connection
2. when i click view all available wireless networks it says none are available in range when i know there are
3. in the network setup wizard it says my wireless connection hardware is not connected
4. message will pop up saying 1 or more wireless networks detected and the same thing happens in 2
Help would be greatly appreciated

A:Help!!! Series of Problems

12 more replies
Answer Match 59.64%

Hey, i got this disc in from Windows IT Pro magazine, and it says "Springboard Series".

Does anyone know what this is? I can't find info on the net, and i lt a friend borrow the magazine.


A:What is the SpringBoard Series?

See this article. Particularly the last paragraph .

1 more replies
Answer Match 59.64%

Hiya there.
I recently installed Catalyst 7.10 software for my awful god awful graphics card which i wish to burn.) I installed for the purpose that it was taking 256mb from my system memory and was causing me to really lag up in Guild Wars- So i went on to the Integrated Graphics-UMA Frame Buffer section and from a drop down list where it was set to 256mb i tried it with 32, 64 and 128mb settings and clicked apply but everytime they reset to 256mb. This was quite frustrating as you can image. Any suggestions would be appreciated cheers and btw does changing the screen resolution mean that i wont lag as less on gw since im on 1024x768 i think and i should be on 800x600 and what about the refresh rate? thanks

Many Thanks for your time.

A:aTi Xpress 200 Series help please.

Best for you to get on the internet and do some research of your equipment. It's fun to look up all of your components. At the same time these questions will all be answered. When you go to New Egg and Tiger Direct, you can read their specifications page: there's a lot of info there. I am going to look up your video card for the hack of it after this post. It sounds like it's an old one. Good luck in your Google'ing.

2 more replies
Answer Match 59.64%

Dear HP community: Hello, and a pleasant day. I am having trouble determining what series is my HP Pavilion G6. Viewing the BIOS, my Product number is: A1Z40EA#ABZ. And using this Product number this website give me the model:  HP Pavilion g6-1267sl Notebook PC I wonder what sereis this model belongs to, is it 1000 series? 1200? The reason for this is because I want to purcahse certain parts in this laptop (the lid, and the palm-rest) Please advise.   Warm regards, Mark

More replies
Answer Match 59.64%

Hello. I am new here and I am experiencing some strange pop-ups. Also, sometimes when I perform searches and click on links, I am taken to completely different sites other than the ones that I asked for.

They started randomly appearing yesterday. Here are the addresses. I made them un-clickable and the second address is too long to post.

I have Microsoft Antiviruspro 2009. I have run it twice and nothing has been detected. Could I be infected?

Thank you for your time.

A:Series of Strange Pop-ups

Hello, First If you have this Microsoft Antiviruspro 2009 and that is it's name I believe you installed a Rogue application and we need to remove it.So let's run this scan and get a log,thanks.Next run MBAM:Please download Malwarebytes Anti-Malware (v1.36) and save it to your desktop.alternate download link 1alternate download link 2If you have a previous version of MBAM, remove it via Add/Remove Programs and download a fresh copy.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself.Press the OK button to close that box and continue.If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install. Alternatively, you can update through MBAM's interface from a clean computer, copy the definitions (rules.ref) located in C:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes' Anti-Malware from that system to a usb stick or CD and then copy it to the infected machine.On the Scanner tab:Make sure the "Perform Quick S... Read more

26 more replies
Answer Match 59.64%

I have two D-Link DIR-655 XTreme-N Gigabit Wireless Routers. Pretend, for my explanation, that there is no wireless activity, because that's not where the problem is.

My cable modem is downstairs, connected to the first Router (I'll call it "Router A").
Router A is connected to a few systems, and the router upstairs ("Router B").
Router B is connected to a few systems.
No systems upstairs can connect to the intenet, I believe because of a communication error between the two routers. Internet works fine downstairs.

So to summarize Router A can find and access the internet, but Router B, connecting through Router A cannot. I thought that the upstairs router would be able to access through another router the same as any other connection, but it can't for some reason.

I want to find out how to run these two routers in series so that I can have mulitple connections in each end of the house. Can anyone give me some insight into how to set this up?

A:Two Routers in series

Each of your routers need to be setup individually, and not through each other.
Once setup, plug the one router into the other. You should have no problems.
But your system would be happier with a switch or even a hub.
Are Router A and B the same brand? When each is used alone, do you get the same readings? Do you have VPN? or other security that could be blocking the second router out?

11 more replies
Answer Match 59.64%

Hey, kinda serial problem, basically every program on my computer is vulnerable, well has had the error message where it says an error was caused in --.dll. After running a program called "Dr.Watson" I got the following information on one of the errors when one popped up.

OLEAUT32.DLL attempted to read from memory that does not exist. It may be using an uninitialized variable, or it may be attempting to access memory after having freed it.

Adobe Type Manager has altered Windows system files.

Module Name: ATMSYS.DRV
Description: Adobe Type Manager
Version: R v4.00-32S058G06NN
Product: Adobe Type Manager
Manufacturer: Adobe Systems Incorporated

Any help be a big help, thanks.

A:.dll series of problems

14 more replies
Answer Match 59.64%

I am running Windows 7 build 7000, and I am having trouble trying to get my video card to work. The card is an ATI 7000 series VE PCI. It is recognized only as a standard VGA adaptor. Are there any known drivers out there. I tried importing my XP driver, but it failed to work as well.

A:ATI 7000 series VE

Quote: Originally Posted by nightmare

I am running Windows 7 build 7000, and I am having trouble trying to get my video card to work. The card is an ATI 7000 series VE PCI. It is recognized only as a standard VGA adaptor. Are there any known drivers out there. I tried importing my XP driver, but it failed to work as well.

Welcome to the Se7en Forums

Since many things in Vista are compatible with Windows 7, I did a search for a vista driver for your video card and came up empty. If any of our resident gurus know of a trick or two for this, feel free to contribute.

8 more replies
Answer Match 59.64%

so my 7800 gt is dying on me and i think it's time for a new vid card. I was thinking about a 9600 gt i believe is the name and my friend told me i should not get that. he said i should proly try to ge an 8800 gts or the 9800 gtx. i'm not sure which one would be the better way to go. are they both similar in performance or do you guys think i shoudl bite the bullet and get the 9800.

A:geforce 9 or 8 series

From the reviews I have seen lately(PC magazine),the 9800 is the
best performing card ever made.

1 more replies
Answer Match 59.64%

Does anybody know anything?

release dates?


i have looked everywhere, cant find anything.

all i can find is what prices to expect.....

A:ATI HD 5000 series

Haven't heard anything... probably because ATI doesn't plan on releasing new GPUs anytime soon.

24 more replies
Answer Match 59.64%

It seems ATI have more cards on the way in the near future.

?We are expecting the new ATI Radeon HD 6000-series to be announced later this year, around Q4 2010. After which, we will be releasing our own Radeon HD 6000-series early next year,? said Kenny Chow, a senior marketing officer at HIS

Graphics Cards Supplier Expects ATI?s ?Southern Islands? to Show Up in Q4 - X-bit labs

A:ATI HD 6000 Series GPU's

Hmmm....looks like my waiting may pay off. I was on the fench as to whether to upgrade my 4890 or wait and see what's next on the horizon as the 5000 series seems to have issues.


9 more replies
Answer Match 59.64%

I purchased a new Dell in December that had Windows 7 Home Premium Version 6.1 already installed. Also installed was Norton anti-virus. All went well until the Norton free 30 day ended and I downloaded a trial version Norton 360, which I believe was version 3.0

I began to notice a slow down in internet response. This was followed by simply having the internet stop working with the error message indicating this. When I would hit a search from google, I would often be taken to a totally different site not related to the original request. Finally, at times when I hit the icon for Explorer, nothing happens and I need to reboot the computer to get this to work.

I contacted Norton and took all Norton products off the computer using their removal tool and installed PC Tools Spyware Doctor with Anti virus as I had a remaining computer on the initial subscription I maintain with serveral other computers in the house.

Since removing Norton, there has been some improvement but all problems continue. I sent PC tools yesterday a scan of my computer to have them search for malaware. No response back as of this writing.

I am open to any ideas and could not find anything totally on point searching the various threads.


A:A series of problems

Hi and welcome to TSF have you cleaned out internet explorer,use the tools button on the upper right handside then internet options and delete the browsing history,also run the clean up tool in system tools and defrag let us know how it goes

5 more replies
Answer Match 59.64%

I have downloaded a whole series of something, and converted them ready to burn, each episode has several files in it. How do I burn the whole series of episodes onto one disc? I just cant seem to do it, have tried clicking and draggng the individual episodes into one file and burning that, it doesnt work, (am prob bein really thick, sorry) have tried with Nero and NTI ( I prefer NTI), what am I doing wrong please?
Emz xx

A:Series Burn To Dvd

Found a guide that will walk you through.

6 more replies
Answer Match 59.64%

I am new here so please pardon if i violate any rules of this forums.
well,i just purchased dell vostro,1088 notebook,with display drivers ati mobility radeon 4300 series.well i just installed some games like war3,need for speed etc.i experienced a black border at sides of my screen.i tried installing latest updates from ati website but none of them works.even 10.4 gets installed but nothing really happens after the reboot.i tried all the posibility i could and looking for help here.thanks in advance:

A:ccc for ati 4300 series

Due to the fact that notebook manufacturers modify their INF files, you can't just grab the latest drivers from ATI directly. You'll need to use modified drivers.

You can use this: ATI MobilityModder -
Or you can try: Welcome to | Official Home of the ATI and NVIDIA Omega Drivers, PC Gaming Drivers and News!

7 more replies
Answer Match 59.64%

this computer which is a gateway series model #2900490 is having some problems. when i turn the computer it freezes up at startup. It has a operating system of windows XP with 512 mb,and 80 gigibits hard drive. And also i have seen the blue screen once or twice, but when i restart it, it will start normal. i don't know why but it will freeze up every other time when i turn it on. I do have a virus protection (AVG) and i have donloaded all the windows updates that it is required by windows updates. I also downloaded all the drivers and utilities from the gateway site.I also downloaded GTWUPD to scan the computer and also microsoft fix it and still i have this problem. Iv'e down the CHKDSK to check the hard drive. Please help


A:Gateway 310 series

7 more replies
Answer Match 59.64%

hi i have a hp 11o desktop pccan someone ples tell me how to boot from a memstick ples

More replies
Answer Match 59.64%

who has this computer, i want you to create a recovery disk for me and send me the files on it plz, very urgent.

A:HP Dv7-4000 series

Hi contact hp they will be able to provide discs for you for a small fee

2 more replies
Answer Match 59.64%

I'm trying to connect a Hp Jornada 540 to my desktop pc using an external ir device, but for some reason the handheld won't recognise the pc and vice versa. I know both devices do detect each other because the ir light flashes as though it is trying to connect but no joy! Both ir devices work as they have been tested with a mobile phone.
Any help will be appreciated

More replies
Answer Match 59.64%


More replies
Answer Match 59.64%

So, where do I begin? It all started a few days ago when I booted up my computer like any other day and about 12 minutes later I suddenly get a message within my tool bar area that says something along the lines of, "system 32/"" "'/"' "'/.exe is corrupt". It said to run the "dskchk" application. I sent in the error report to Microsoft where it then sent me a link to the the help page. It said to open up the command prompt and enter I believe "dskchk" then press enter. After that it said to enter another series of commands which I can't quite remember unfortunatley. After that my computer restarted in order to diagnose the problem I believe.

After all that happened my computer restarted but then suddenly gave me the "disk boot error, please insert system disk" problem. Like an idiot I sorta jumped the gun and I think I installed another copy of Windows XP on the hard drive. So now when I boot up my computer there are two versions of Windows XP to choose from. The first one works and is a bare bones version with none of my precious files on it. The second one is what I believe has all my files and everything that I would like to get back. However, it will not let me into that copy of Windows XP.

What the hell did I do and is there any way to save my files?

A:A series of problems.

7 more replies
Answer Match 59.64%

Lately I've been messing around trying to have two routers run in series. I have a Wireless-G Linksys and a Wired Network Anywhere Linksys router. Can anyone help me out. Please explain as simple as you can.

A:How to run two routers in series

By default Linksys routers are (IP) (within the setup page of your Router)

But you can't have two same IP addresses, so therefore you must change one of the Linksys routers to (lets say)

Both routers are also probably set up as DHCP, but to make this work only the Router connected to the Internet line should have DHCP enabled

Therefore the Router connected to the computer should have DHCP disabled

Once the two IP are confirmed different
And once DHCP is enabled Only at the Internet end

Then it's just a matter of connecting the ethernet cables up, and testing online.

9 more replies
Answer Match 59.64%

Como to think of it, both HP and Dell have kind of entertaining and marginally convincing videos/case studies of companies using their workstations (Dell with I think some photographer and a car manufacturer; HP with some 4k video producer). is it me or Lenovo P series does not have an analog video campaign of people/industries using their workstations? I for one, would find such case studies interesting.  edited:sorry; just found a few...(mod, delete at will). 

More replies
Answer Match 59.64%

Been having some serious problems with BSOD since I got my computer in December. I'm attaching my minidump files, if anyone could help me out and let me know what my problem is I'd really appreciate it.

I'm using Windows 7 64bit version 6.1 (build 7600). My graphics card is ATI Radeon 4890 with the latest drivers. If there's any other info you need let me know. Thank you all very much.

A:Series of BSOD

Quote: Originally Posted by Nate96r

Been having some serious problems with BSOD since I got my computer in December. I'm attaching my minidump files, if anyone could help me out and let me know what my problem is I'd really appreciate it.

I'm using Windows 7 64bit version 6.1 (build 7600). My graphics card is ATI Radeon 4890 with the latest drivers. If there's any other info you need let me know. Thank you all very much.

Twenty three BSOD's is going to take some time. In the mean time I am running the latest 5. Be right back


EDIT: The first five were a mixed bag. Several were inconclusive (probably crashed before the file could be written), the rest memory corruption.

While I am doing the rest of them for comparision I would download memtestx86, burn it to a cd, and run it for 5 passes at least to test the memory.


BugCheck 109, {a3a039d89977b603, b3b7465eebf5dec5, fffff88000d5c7d4, 1}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck 109, {a3a039d89968b664, b3b7465eebe6df26, fffff88000cd41b4, 1}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck 3B, {c0000005, fffff800030a2e9f, fffff88009610060, 0}
Probably caused by : ntkrnlmp.exe ( nt!KiDeliverApc+a7 )
??????????????????????????????????????... Read more

9 more replies
Answer Match 59.64%

Laptop: Asus K55a Windows 8 64bit

Ok, so last night I spilled a drink over my laptop and I immediately took the battery out, flipped over to avoid anymore spilling and cleaned what I could with a paper towel. Then I took the entire back and keyboard off and dried everything I could with a microfiber cloth (it was barely wet, but just wanted to make sure).

I disconnected the power strip, touchpad strip, and the (i think) keyboard strip. (the biggest strip of the 3)
I booted about a hour ago after reconnecting the 3 and there's a black piece on each that clamps them all down, the largest one has fallen off (I don't see any pieces broken though) - does it re-attach with ease?

When I booted it was fine, but whenever I typed my password: a= aj, j=j\ etc...any idea why?
So I proceeded to take the keyboard off again and try reattaching it (the strips basically).

Now when I boot it says to insert a bootable media drive and press a key again
So its gone from keys not working properly to it won't boot period (other than giving me that error) and I think I've broken a piece

Largest problem: getting that strip to stay in there properly and fix the detached black clamping piece
Minor (for now): why the keys are acting the way they do


A:Series of issues

I can't help you with the "clamping pieces", but the key's are doing that because there will still be residue in the KB and possibly the Board inside. How long did you leave until turning it back on again? typically, electronic devices such as laptops/smartphones should be stored in very dry places after a good drying and then start up after at least 5 days+ In my opinion anyway.. I've had some success after 2 soakings.

3 more replies
Answer Match 59.64%

Hello newbie here, my hard drive has 'locked' so it says , the hard drive came preloaded with windows 7 home, my question is,if I install a new hard drive and use my Lenovo recovery disc will I be able to install Windows 7, sorry if I seem to be a nummie but this is all new to me as I am a 'silver surfer'. Thanks for any help.

More replies
Answer Match 59.64%

So I got W7 for a while now and it's great and all that, but if i try to play any CoD(1,UO,2,4/ 5+6 work) it runs smoothly but after about 5-10 minutes it just freezes completely and I'm forced to reboot. I tried with differed compatibility settings, as admin, with differed settings and with a microphone plugged in and nothing changes.

But also, recently i tried to play CoD2 for a while and it would crash as normal but sometimes I could play for a few hours then I quit, then start playing again and then it freezes up again.

Can anyone please help? Else I'm going back to XP.

I'm running W7 Ultimate 64x

A:CoD series crash

Hi afuz.

First ...


In the line at the top of you will see UserCP.
That is an abbreviation for User Control Panel.
Click on UserCP.
In the left-hand column, under Your Profile you will see Edit System Spec.
Click on Edit System Spec
You can copy and paste from the output of Speccy, Speccy - System Information - Free Download to fill out much of the info. Be sure to use the Other Info section of your System Specs for such info as your optical drive, your wireless adapter, your speakers, etc.

Do you have the newest video driver for your card?

Are there patches for cod?

3 more replies
Answer Match 59.64%

I have been getting constant blue screens with different messages every time ranging from irql is not less or equal to page in non paged area to just no message at all.
This usually happens within 2 minutes of booting up the computer.
The last time this happened I had just installed a new keyboard driver and uninstalling it fixed it.
This time it came out of nowhere and I cannot solve the problem.
please help.

I have an hp p6557c with an AMD Athlon II X2 220 processor 2.81 GHz
also I could not attach the perfmon file because it could not find the filepath.

A:Series of BSOD's


I would updating this old driver. Old drivers are obsolete and can cause BSOD. Update them (links are provided)

hardlock.sys Tue Feb 03 04:34:08 2009 - Hardlock Device Driver
Aladdin Knowledge Systems: Support

* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 0, fffff80002c8e8b6}

Probably caused by : ntkrnlmp.exe ( nt!KeSetEvent+226 )

Followup: MachineOwner

0: kd> !analyze -v
* *
* Bugcheck Analysis *
* *

An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a k... Read more

6 more replies
Answer Match 59.64%

Hello everyone,

Do to some problems with our previous domain, we have decided to move our website onto a new domain.

This new web site will contain alot of new features, resources, tutorials, and more, and is targeted to the growing communities of video game and operating system developers. This will also be the new hosting site for our OS Development Series, for those who have been following it.

We are going to keep the previous site up to redirect our members. The new web site is located here, under our company name:

Please let me know if you have any questions, comments, suggestions, or ideas

We apologize for any inconvenience this has caused. We hope this new comain will not have the same problems as the previous one.

Thank you,

~Mike ();

More replies
Answer Match 59.64%

Hello,  I own an HP ENVY All-In-One 23-q128  I received notification telling me that Intel WLAN Driver For Microsoft Windows 10 was available. The process was going fine until the actual installation started. I waited about an hour or two for it to complete, but it didn't. I started a new installation and went out for like 4 hours, came home, and it still hadn't installed. Am I doing something wrong?  Thank you.

More replies
Answer Match 59.64%

It takes 6 minutes to boot my PC (Dell Dimension 4600 series, Windows XP) after I installed above printer. After windows logo appeared a cursor starts blink on the blank screen and stays there about six minutes. But If I removed the USB cable that connect the printer this does not happened. help.

A:HP 7300 Series All in one

Chandare said:

It takes 6 minutes to boot my PC (Dell Dimension 4600 series, Windows XP) after I installed above printer. After windows logo appeared a cursor starts blink on the blank screen and stays there about six minutes. But If I removed the USB cable that connect the printer this does not happened. help.Click to expand...


My name is Todd and I work at Dell's corporate headquarters. My team works with customers via blogs and forums. I saw your post and wanted to see if I could help.

Have you tried any other USB devices in that port to see if it happens with any other devices and isn't specific to the HP printer?

You may also want to go into your system setup (F2 during startup) and check the boot settings for the system. That system may be incorrectly trying to boot from a USB device and until it isn't able to it "hangs".

Let me know if other devices have the same problem or if you've been able to resolve the problem.

Thank you,


Customer Advocate
Dell, Inc

1 more replies
Answer Match 59.64%

Can't get my scanner to work...reinstalled, checked config. - all okay. Says.."cannot detect". It's plugged in...worked last week. It's a 6200 series scanner not a 600 series. I need to learn how to proof...Thanks for any ideas ya'll may have...The exact error message I'm getting is - SORRY, SCANNER COULD NOT BE INITIALIZED. [SCANNER NOT FOUND]

[This message has been edited by JennyP (edited 09-29-2000).]

[This message has been edited by JennyP (edited 09-29-2000).]

A:HP ScanJet 600 series

I'm assuming that it does have power and that the scanner is on correct?
First disconnect the scanner and reconnect to ensure proper connection. To wit, a visual inspect is not good enough...
Also, when you reinstalled did you do a complete uninstall first? If not do that. Else, you are really just adding a new layer of paint over the old cracking layer, eh?

Don't know much about your series...I'll go look, but is it USB or no? Anyway, keep us posted...

3 more replies
Answer Match 59.64%


I'm waiting on the next nVidia series of cards, (GTX 380?) as my 8800GTX is still ok for the minute.

Does anyone know when the next release is? I'm guessing around July?...

Just intrigued, because I want to make a monster PC in the summer!

Cheers guys,


A:Next nVidia series? (GTX 380?)

The earliest news on nVidia usually shows up here:,1/Graphics-Cards,4/

2 more replies
Answer Match 59.64%

I recently build a new computer using a KT6V MS-7021 ATX Mainboard. When I attempt to boot it up, it errors out. The board has an optional Diagnostic LED on the back. The LED lights up with 4 red lights which it says:

System Power ON
The D-LED will hang if the processor isdamaged or not installed properly.

I'm using a brand new Processor, in fact I even tried a second new processor that still caused the same problem. I'm thinking its something else causing the computer to hang. And other ideas are suggestings to what might be the cause would be apreicated.


A:KT6V series MB help

Is that MSI Products? you should read their FAQs. Please tell us your system specification in brief in here..

Thanks, Lucan

4 more replies
Answer Match 59.64%

Hi Friends,
More than a week ago i have not been able to use my HP 600B series Desktop with serial number-TRF2310LFZ,Product number-B5G17A\BH5 and system BIOS-CO2_712.ROM v7.12.It displays error message-"No boot disk found or disk failed" on a dark screen.

Please how may I resolve this?


A:HP 600B series

sounds like the HD failed. You should probably hit the HP website for that machine and get a hard drive diagnostic test......but it sounds like that one is cooked.

2 more replies
Answer Match 59.64%

So, does anyone have any links or info on the New Nvidia 55nm tech.

I know that they are planning to release the GTX200 series on a new 55nm Fab. and that they will probably release a GTX260b and 280b. or some people are saying a 300 and 320. or something like that.

So does anyone have some links, or good info, other than some 1 liners saying that NV is planning to make them. Like any release dates. or what not. I've heard that they are going to silently release them RIGHT after ATI releases there new 4870x2 and they are going to drop some "Good" new 55nm cards that will be very competitive yet single card solution.

the 4870x2 is supposed to be out August 12-13th give or take. So hopefully we see some NV Green soon after that. or the next day would sure rain on there parade.

So ya, let me know what you all think, and share your info and news with everyone.


A:New GTX200b series...??

I haven't heard nothing on Nvidia's die shrink for their chips.

38 more replies
Answer Match 59.64%

Hi All,
My first post to the forum
Today I'm experiencing repeated 124 blues screens.
i hope someone can help.
Here's the Minitoolbox log:
MiniToolBox by Farbar  Version: 01-07-2015
Ran by Karl (administrator) on 21-07-2015 at 22:36:10
Running from "C:\Users\Karl\Downloads"
Microsoft Windows 7 Ultimate  Service Pack 1 (X64)
Model: G71GX Manufacturer: ASUSTeK Computer INC.
Boot Mode: Normal
========================= Event log errors: ===============================
Application errors:
Error: (07/21/2015 10:17:37 PM) (Source: WinMgmt) (User: )
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
Error: (07/21/2015 10:17:02 PM) (Source: Application Error) (User: )
Description: Faulting application name: FBAgent.exe, version:, time stamp: 0x4a9f9317
Faulting module name: FBAgent.exe, version:, time stamp: 0x4a9f9317
Exception code: 0xc0000005
Fault offset: 0x000000000002c7c2
Faulting process id: 0x594
Faulting application start time: 0xFBAgent.exe0
Faulting application path: FBAgent.exe1
Faulting module path: FBAgent.exe2
Report Id: FBAgent.exe3
Error: (07/21/2015 10:00:11 PM) (S... Read more

A:Series of 124 BSODs

Hello KCBluesman and Welcome to this Bleeping website!
Just as a test, boot into Safe Mode and run the computer for a couple of hours. Let me know if your crashes stop, or do they continue. If you don't know how to access Safe Mode, your user's manual will tell you. If you don't have one, SM is usually accessed by tapping one of the F-Keys (try F8 or F11 first) on boot. If you can run in SM without crashes, reboot and try Safe Mode with Networking (that will enable internet connection). Let me know the results of each.

4 more replies
Answer Match 59.64%

does anyone have any info on these cards, i would like to see the 8800GTS drop to at lest 200 when the GeForce 9 Series come out this November. price for the GeForce 9800 GTX will be 549-649 USD. price for the GeForce 9800 GTS will be 399-449 USD. i would like to know more about these cards

A:GeForce 9 Series

Nobody knows for sure but it's probably not the 9000 series. It looks like it's going to be the 8700GT and 8700GTS. Good cards (exactly what I need) but they will be between the 8600GTS and 8800GTS 320.

2 more replies
Answer Match 59.64%

Does anyone know why;

My old mum got a Asus FM3 laptop with Vista. It has been a nightmare, locking, restoring etc. so as my dad can help (he has Xp on his) I wiped and installed XP Pro sp2 and downloaded all drivers needed from asus.

Problem is everytime I restart the logo etc comes up bright then as all is done the screen goes off (you can just see it).
To make it come back you need to press Blue FN and F7 LCD on then is all fine till restart.

Is there a way to make it just load as normal as she will not see this as an improvement.

A:Asus FM3 series lcd off

Sorry but did not feel the need to make a new post.

The other problem is that audio does not work. I cannot find a driver, is this the end do I go back to vista!

Surely a vista laptop can do xp pro!

3 more replies
Answer Match 59.64%

I just got a new CPU, it's an AMD FX 4-core unit. I tried upgrading my motherboard's BIOS (my MB is a GA 880GM-USB3) to the two most recent BIOS, and it just makes my computer not even boot up with the new CPU in it. Even when I try putting in my old CPU, it won't boot up sometimes, so I have to keep swapping out processors until it boots up. Please help!

A:Why won't my new AMD-FX (series) CPU work?

Dont have a Fx series myself, but as far as I know they should work fine in an am3 motherboard. being backwards compatable (am3 +)

Clear your cmos after installing the new cpu, Reset your bios to optimal/auto, And double check your motherboard supports your cpu.

If that wont work I would RMA it if possible.

Hope this helps

9 more replies
Answer Match 59.64%

Right, I had been debating with myself whether or not I'm going to get one of these monsters, when I discovered that I'll need to upgrade my power supply. Having asked around a bit, I was told I'd be wanting in upwards of 650W, which sounds like an awful lot. I don't want to have matched the cost of my new graphics card in electricity bills within the year, afterall.

But imagine my suprise when I read in a review that the GTS version (which I was considering) only requires 400W, while the GTX requires 450. Can anyone sort this out for me once and for all? What are the actual power requirements?

A:GeForce 8 series

It depends a lot on the amps on the 12V rail.

Appearing at
As far as power requirements go, the GeForce 8800GTS will require a minimum 400 watt power supply (with 12V current rating of 26A). The GeForce 8800GTX will require a minimum 450 watt power supply (with 12V current rating of 30A) and you can double those numbers when you start talking about SLI.Click to expand...

Personally, I'd use at least a 500 or 550 watt power supply for the 8800GTS and GTX, respectively; but you may be able to get away with what the article says. It also depends on hard drives, etc. With graphics monsters like that, too, I'd use only power supplies from a select few vendors, such as Corsair, PC Power & Cooling, SeaSonic, Antec, Enermax, or FSP. That's about all I can think of for now.

4 more replies
Answer Match 59.64%

I hooked my hp pavilion up after moving and a series of 7 or 8 beeps comes on when i turn on tower.nothing comes on the monitor

A:series of beeps

What is your pavilion number,is it 7 or 8 beeps?

1 more replies