Tech Problem Aggregator

Touch screen doesn't work after upgrade to windows 10

Q: Touch screen doesn't work after upgrade to windows 10

i upgraded to windows 10, and surprise surprise my touch screen is gone. no drivers, no hint of it anywhere on my pc settings, i tried finding a link on HP's website to redownload the software, no such luck, you would think for such a common problem hp and microsoft would get there act together and provide a patch. Any ideas anyone. thanks

More replies
Answer Match 84%

Hi,thanks a lot from hp companyI bought hp envy k212ne last week and I removed ubuntu and I installed windows 8.1 and I downloaded all of the drivers for my laptop from hp support .In addition before I install drivers in my laptop , I saw pen and touch in my control panel , but now it isn't there.Then I went to device manager (Human Interface Devices ) but I didn't saw HID-COMPLIANT TOUCH SCREEN ,there.So I need your help .Plz help me.

More replies
Answer Match 84%

I just purchased this laptop yesterday, 9/12, and it was working perfectly fine until today. I was working on it and the touch screen stopped working so I can only use the keypad. I'm wondering if something went wrong with the laptop or if it can be easily fixed!!

More replies
Answer Match 84%

The touchscreen on my Yoga 260 isin't working. I first noticed this problem when the screen was acting wierdly. When you tap on your yoga a light circle appears and fades over time to mark or show where you tapped and when you swipe a trail or tail appears behind of where you swiped then disappears over time. So when I opened my Yoga these taps and swipes were appearing all over the screen ramdomly in a very rapid pace. So I restarted my Yoga and saw that the swipes and taps were still there. So I chose to restart the Yoga again and the taps and swipes dissapered. After that I noticed that the touchscreen became unresponsive but the computer runs as normal butthe screen is unresponsive. Before I discovered the problem I could remember dropped the computer a small height but caught it. If there's a solution to this problem I'm happy to listen! Thanks. 

More replies
Answer Match 84%

Hi,thanks a lot from hp companyI bought hp envy k212ne last week and I removed ubuntu and I installed windows 8.1 and I downloaded all of the drivers for my laptop from hp support .In addition before I install drivers in my laptop , I saw pen and touch in my control panel , but now it isn't there.Then I went to device manager (Human Interface Devices ) but I didn't saw HID-COMPLIANT TOUCH SCREEN ,there.So I need your help .Plz help me.

More replies
Answer Match 84%

I just purchased this laptop yesterday, 9/12, and it was working perfectly fine until today. I was working on it and the touch screen stopped working so I can only use the keypad. I'm wondering if something went wrong with the laptop or if it can be easily fixed!!

More replies
Answer Match 83.16%

Hi Guys...I'm using the Lenovo multi touch driver for my X61T. With Windows 7 build 7000 the same driver when I wake my laptop from sleep the touch screen works. Starting with build 704x (i can't remember the exact build but it was the first leaked x64 build) when I wake the machine from sleep the touch screen doesn't work (both pen and finger touch)

I have tried to change USB settings but I haven't seen any fix. A restart of the machine means the tablet works again. Any ideas about a patch until Lenovo makes new drivers for Windows 7?

A:Touch Screen doesn't work out of sleep

There is a registry patch for better USB connectivity after waking from sleep, available from Lenovo.

Lenovo Support & downloads - Registry patch to improve USB device detection on resume from sleep for Windows Vista - Notebooks

How's the touchscreen working for you? Hope it's great! I don't like touchscreens because the screen can heat up and flicking your finger around on it can really burn.

4 more replies
Answer Match 82.32%

Screen was cracked so I replaced the screen. Now touch doesn't work.
There is no "Pen and Touch" and "Tablet PC Settings" in Control Panel. In PC info it says, "No pen or touch input is available for this display."
Touch DOES work on LINUX as I ran it from a usb drive, so it is not a hardware problem.
I have reinstalled Windows.
I have another Yoga 2 Pro and comparing Device Manager in both I see no differences.
How can I get the touch to work again?

A:Why doesn't my Touch work after replacing the screen on my Yoga 2 Pro?

try refreshing your PC maybe the driver is not working properly
If the touchscreen does show up on the device manager try updating the driver from there. (it will be listed under HID )
​Otherwise To refresh your PC Swipe in from the right edge of the screen, tap Settings, and then tap Change PC settings.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, click Settings, and then click Change PC settings.)Tap or click Update and recovery, and then tap or click Recovery.Under Refresh your PC without affecting your files, tap or click Get started.Follow the instructions on the screen.

3 more replies
Answer Match 82.32%

I bought a windows 8 hp pavilion touchsmart and touch screen worked. I updated to Windows 10 and it worked, only after I did a factory restore did it not work. I've tried everything with the device driver and another factory restore and it still does not work. I sent my computer in to get it fixed while it was under warranty and it was still not fixed. I resigned to it not working and I think that hp should have solved this problem before selling its computers. So we are blaming it on Microsoft 10, but that is not the issue when it worked until I did a factory restore and attempted everything suggested. I have a 350 dollar piece of **bleep**. Plus now my Mic isn't working and there aren't any drivers for me to upgrade to, anywhere.

More replies
Answer Match 79.38%

I have the issue that the touch screen + front camera + back camera + windows button on the screen are not working.

I tried installing the display/graphics drivers but that did not helped.

I bought this laptop from Saudi Arabia and it is still under warranty but I am out of country so i cant claim the warranty as well.

someone please sort out this issue and tell me the solution or tell me what i should do?

Help will be really appreciated.
some details about my laptop:

Toshiba Satellite U920T-B919.
windows 8.1 update 64 bit.

Thanks,

A:Satellite U920T - front/back cam + touch screen + win button doesn't work

Since you mentioned different issues with your notebook, I think that in this case its advisable to recover the notebook back to factory settings just to check if all these problems are related to system problem.

Regarding the webcam: the Windows 8 /8.1 already contains the webcam drivers and therefore additional webcam driver installation isn?t possible. Additional webcam driver does not exist simply.

From my point of few the whole description smells a little bit like a hardware problem of the upper slide part where the touchscreen is part of.
The win button as well as the both cams are located there and probably there is some lose connection between the two parts (touchscreen and keyboard)

Anyway, as I said above, its advisable to recover the notebook to factory settings just to ensure that the system isn?t the troublemaker.
In case of hardware problems, you would need to get in contact with service available in your country.

7 more replies
Answer Match 77.28%

Hi, Please help! I updated to window 10 this evening and things seemed fine. I dowloaded a few apps and restarted the system. Whe the system came back - the cursor wouldn't leave the top of the screen - just flickering aroung the top edge. The keypad works, as do the left and right clicks and the pointing device, but I fing he pointing device imposible to use and as soon as either the touchpad is toched, or the pointing device is touched at the same time as the left and right clicks - the cursor goes straight back to the top of the screen (where the close button is) As I am sure you can understand - this is all but unworkable. I have looked to se if the driver needs updating - it doesn't. Can you help? Richard











Solved!
View Solution.

A:Updated to Windows 10, now touch pad doesn't work

I manually reinstalled a windows 7 software for synaptics (none later available) and is currently working. Will keep my fingers crossed.Thanks for your help

10 more replies
Answer Match 75.6%

I have been facing this issue from the day one since I installed Windows 10 on my laptop (Dell XPS L502x).

Native Windows Applications like all browsers, office products etc. anything that is not from the Store, works fine. I can use Touch Pad scrolling with no trouble. e.g. on Internet Explorer, Chrome, MS Word, etc.

But the apps that come out of store or the apps like those which come pre-built with Windows 10 such as new Settings UI, Microsoft Edge. Touch Pad scrolling just don't work with these apps. When I perform scrolling the scroll-icon appears but doesn't scroll the content.

This issue is only with Touch Pad. External Mouse works great with scrolling on any kind of app.

Hope to find a solution here.
Thanks

PS: drivers are all good on the machine and up to date with no warning or error.

More replies
Answer Match 70.98%

Hi there!After upgrading my note to Windows 10 touch screen does not respond. How to fix it? Thank you!

More replies
Answer Match 70.56%

Hi,My touch screen is disabled upon upgrading to Windows 10, I tried to uninstall HID Compliant touch screen from Device Manager then reboot, but still no luck. Anyone have found a fix? Thanks.

More replies
Answer Match 70.56%

had this computer for little over 2 months and snce having it the touch screen will not work at all hp 15.1 notebook, touch the screen nothing happens look in device manager cant even find the touch screen in there, any help would be appreciated, thanks

A:touch screen on windows 10 wont work

I request you to boot the PC to BIOS and test the touchscreen in BIOS. To boot the PC to BIOS, first turn off the PC completely. Keep tapping ESC on startup. You would get a startup menuPress F10 to get into BIOS. do not keep the PC in mute. Touch the screen in BIOS, the PC should beep.  If the PC beeps in BIOS (system utility), the touch screen is fine and you are facing a driver or a software issue. If the PC does not beep in BIOS, when you touch the screen, there is a issue with the display/touchscreen. Considered as a hardware issue (service or display replacment might be required). Please share the product number of your PC. This will help get the specification of your PC and I can give further suggestions.  ****Click the White thumb to say thanks********Please mark Accept As Solution if it solves your problem****

1 more replies
Answer Match 70.56%

Hello,I am desperate for help. My laptop will turn on. And I can type in my password. But then when the computer loads it takes a very long time and when it gets to the desktop the keyboard, the mouse, the touchpad, and the touch screen won't work. I can see everything on my desktop. But I cannot open anything or do anything at all. How can I fix this?Thank you!!!

More replies
Answer Match 70.14%

Touch screen stopped after updating to Windows 10 And I could not get TouchSmart to work again. Can someone help because it looks like HP have just not botherd to update drivers or systems The Laptopis an    ENVY 15" TouchSmart 16gb Ram 4TH Gen i7

More replies
Answer Match 70.14%

Since windows 10 upgrade, my touch screen on my pc no longer works. How can I fix this problem? I had also upgraded my son's laptop and now his mouse doesn't work on his, it works is a mouse is plugged in but not without on either computer. I am confused!

A:Touch screen no longer work after upgrading to Windows 10

Head over to the system builder websites to download and install windows 10-compatible drivers for your machines.i_Xp/Vista/W7/W10 User

3 more replies
Answer Match 69.72%

My Cd rom stopped working after upgrading to windows 10.  I've read posts that I should go to device manager to update, however it doesn't show up in device driver.  How do I resolve this issue? thanks,

A:CD rom doesn't work after Windows 10 upgrade

Hi: Try the steps listed in Resolution 4 at the link below... https://support.microsoft.com/en-us/kb/314060

1 more replies
Answer Match 69.72%

Touch pad doesn't work if you close and open the laptop, sometimes the touch pad turns off on it's own. I have checked the settings for the touch pad and for what the computer does when closing the lid, they are correct. Tried booting in safe mode and still had same results. The only way to get the touch pad to come back on is if you reboot the computer. Any ideas?

More replies
Answer Match 69.72%

My client told me this was a touch screen, so that is what I ordered.  HP 749970-001 touch screen display assembly.It is installed, but not recognized.  In order to use it as a touch screen, would I have to replace the motherboard too?Is there a driver available?  The display works, it is just not working as a touch screen.




Sparky

More replies
Answer Match 69.3%

Have a brand new just delivered yesterday Win 8.1 Inspiron 15/7000 laptop. Completed Windows 10 upgrade this morning, Win 10 disabled Inspiron 15/7000 Touch Screen.  Where do I go to re-enable touch screen?

A:Windows 10 upgrade disabled Inspiron 15/7000 Touch Screen

Same issue.  After Windows 10 upgrade, touch screen does not work, even though driver says it is current (HID - Touchscreen).
Dell Inspiron 15/7548
Driver Version: 10.0.10240.16384

9 more replies
Answer Match 68.88%

After upgrading my OS from Windows 7 to Windows 10, the wifi card doesn't work anymore.  I've downloaded the latest drivers for my wifi card, or at least I think I have, but it still doesn't work.  The wifi card is a Intel 11230BNHMW Centrino Wireless-N 1030 WiFi Wireless Mini PCI-E Card.  Does anyone know if this card is compatible with Windows 10.  If so, which driver do I need?

A:Wifi Doesn't Work After Upgrade To Windows 10

Hi, Please try the following discussion:     http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Wireless-not-working-after-upgrading-t... Regards

1 more replies
Answer Match 68.88%

Hi After upgrading to Windows 10 the wecam doesn't work. Tried installing the drivers for Windows 8.1 and it crashes on installation. Trying to update the drivers through Device Manager there's also an error. What can I do?

A:Webcam doesn't work after Windows 10 upgrade

 Hi, Try: HP Universal Camera Driver

1 more replies
Answer Match 68.88%

Hi, not sure if a thread like this already exists but I couldn't find one.

I took my old laptop to my local pc store for a re-store (it used to run xp) i got the laptop upgraded instead to win 7 to try and make it faster and better. Everything on the laptop now works apart from the sound, there is no sound at all, I've been told its because its incompatible but i was wandering if there is possibly a way of fixing it.

the laptop is a sony vaio vgn-fs485b.

Regards

A:Windows 7 upgrade - sound doesn't work!!

What's your sound card?

9 more replies
Answer Match 68.88%

So recently my laptop Pavilion DV6xxx updated the OS to Windows 10 64 bit and for some reason the touch pad works, but the scrolling system i.e. the designated scroll bar partition doesn't scroll any more. I have the Synaptics Pointing device software and my system is up to date in drivers yet it doesn't work. Please help as not being able to scroll with the touch pad is a huge inconvenience.

More replies
Answer Match 68.88%

Hello! I've just installed Windows 7 Professional on my HP 350 G1.  I have a problem with touch pad - it works, but just as mouse (and also installed as mouse). I've tried to update and downloaded synaptics driver, but it failed to be installed. I can't delete previous version of Synaptic driver and installed a new one, because it's not in Programmes list at all.  Windows Update doesn't work as weel, if it's relevant.

A:Synaptics touch pad doesn't work

 Hi, Install the driver from the device manufacturerhttp://drivers.synaptics.com/Synaptics_v17_0_19_C_XP32_Vista32_Win7-32_XP64_Vista64_Win7-64_Acme_Inc...

2 more replies
Answer Match 68.88%

hi recently my laptop has had a problem concerning a update from microsoft and has been restored to an earlier point before the update. Now my touch pad won't work so i got to connect a mouse every time i want to use it is there any reason it won't work concerning drivers or is my touch pad broken...

Thanks in advance
Xeno
P.s. its a sony vaio with vista installed intel dual core 1.67ghz
2Gb ram
120gb of hard drive space
im ussually good at fixing this kind of stuff but its my first time using vista
 

A:Laptop doesn't work with the touch pad

Did you reinstall the drivers/software?
 

1 more replies
Answer Match 68.04%

I'm using windows 8 pro which I upgraded from windows 7 home premium in january. After the upgrade, my e key stopped working. After another few months, more keys stopped working and now, no keys are working. What do I do?

A:Laptop keyboard doesn't work after upgrade to windows 8

does an external keyboard work

2 more replies
Answer Match 68.04%

Hello, I recently upgraded my Envy 27 product number 27-k151 model number F3D62AA to Windows 10 from Windows 8.1 and I can't get the subwoofer to work. If I plug the subwoofer and turn on the computer I will get no sound at all. If I unplug it and restart, I will get sound out of the front speakers but If I plug the subwoofer again while the computer is on I will get a big distortion in sound and leaves the audio controls useless, this forces me to restart and again as the sounds are extremely loud and are disturbing. When restarting, if I leave the subwoofer plugged I will get no sound at all even If I unplug the subwoofer after restarting. The only way to get sound again is restarting without the subwoofer plugged in to the subwoofer jack. I have tried to update the sound card diver IDT High definition codec, reinstall it, etc., I have moved all the audio settings and still not able to make it work. Beats Audio control panel doesn?t seem to be doing anything, any changes in this panel doesn't seem to change the sound settings, not even the master volume bar.I have plugged in the HP Pulse Subwoofer Product number LZ925AA#ABL using the same cable to another Envy 27 without the windows 10 upgrade and works fine. I tried to compare between the two computers (the one with windows 8.1 and the one with Windows 10) and the difference that I can see is the Jack information in the Speaker/ Headphones properties. In the old system I see 4 Jacks as follows: L R Front Panel Inter... Read more

A:Subwoofer jack doesn't work after Windows 10 Upgrade

Hi Hector75, Sounds like a driver......or Beats Audio issue.Have you tried using HP Support Assistant to scan for updated software and drivers?

9 more replies
Answer Match 68.04%

Can someone give me a link to update the SD Card Reader for my ProBook 4540s?

A:SD Card Reader Doesn't Work After Windows 10 Upgrade

 Hi, Install  Micron Media Card Reader Driver: JMicron Media Card Reader Driver (International)

2 more replies
Answer Match 68.04%

Hi everybody,

I used unistalled everything on my Satellite laptop and reinstalled Windows 10.

Now all the toshiba applications are gone.
This is not my problem.

My problem is that scrolling on my touchpad doesnt work.
Synaptics is gone and when I try to install a new driver (Touch Pad driver) he gives an error after the installation.

Synaptics has been installed accept for the mouch uttilities.

Can somebody help me.

Greetings, Jiska

A:Touchpad scrolling doesn't work after Windows 10 upgrade

I don’t know what notebook model you have but fact is that not all notebook series are supported for Win 10 upgrade.
In such case the Win 10 drivers will not be released for such unit….

The touchpad scrolling requires additional touchpad driver…
If your unit supports Synaptics touchpad, you could also use the driver from Synaptics driver page:
http://www.synaptics.com/en/drivers.php

But currently driver for Win 10 isn’t available… you could try to install and use the Win 8.1 driver but I’m not quite sure if it will work properly….

1 more replies
Answer Match 68.04%

I previously had windows vista installed on my computer and just the other day reformated and installed windows 7 64bit. Before reformating and installed win7 my computer worked fine.

Now after the upgrade to win7 i am having problems with my sound card. I have a Creative Worlds - Sound Blaster X-fi XtremeGamer sound card.

My sound works fine, i can watch movies, listen to music play games, my sound comes in fine. When i use skype or ventrilo to talk, my microphone doesnt work and a message comes up that says Cant access your sound card. On vent it says "Unable to activate DirectSound for selected device. DirectSoundCaptureCreate failed. HR=DSERR_NODRIVER. No sound driver is available for use"

The first thing that came to my mind was installing the drivers. I downloaded the drivers from the creative worldwide website for my sound card, and from dell.com for my model computer. When i try to install them, it says "Device object not present, please restart and then run setup"

So i thought ok, my computer isnt recognizing my sound card, so i downloaded a identification model off the creative worldwide website for my sound card. Then when i try to run that, it says "Your version of Windows Operating System is not supported by this product. Please upgrade to windows 7 or later versions before trying to install".

Anyone have this problem or have any suggestion of what to do?

A:Windows 7 upgrade, now mic doesn't work (soundcard problem)

What model Dell do you have? You didn't fill out the System Specs.

However, there are some Dell model SoundBlaster Xfi cards that are not supported by Creative or Dell for Win 7. On these models the Vista drivers do not work, Windows 7 specific drivers are required.

1 more replies
Answer Match 68.04%

hi
i have dell inspiron n5010
i want to disable its touch pad but cant figure it out
there is a touch pad disabling button (right beside f12 key) but it doesn't work

can anyone tell me how to do it cuz it gets really irritating sometimes.

thank you in advace
 

A:Touch pad disabling button doesn't work

Touchpad problem

Hi. I don't know about a button to disable the touchpad on a laptop, but there is a free program that will do the same thing, so you can type away, and your arm won't move the cursor around. Try http://code.google.com/p/touchfreeze/
 

9 more replies
Answer Match 68.04%

Hello everybody.

I got an ASUS N50Vn aka X5AVseries..

On the top of the keyboard I got a "touch panel" where I can control the volume, change the computers performance and so on.

But after installing Windows 7 it doesn't work.

Anybody knows what to do? Maybe a speciel driver I need?

Thanks, Peter.

A:ASUS - Touch Panel doesn't work?

You have to install all the acpi/she drivers from asus's website. You can use the vista or xp drivers.

(had to do this on an 1000he from asus, but I got almost all hardware keys working)

9 more replies
Answer Match 67.62%

Just for people who ar facing the same od problem. I have been searching for hoursfor a solution to this problem. If you are facing problems with Cardreaders after Windows 10 Upgrade like SD cards are not recognized, or it is just indicating "local Disk" or in german "lokaler Datenträger"  in Explorer and you cannot access whatever SD/MMC/CF cards you are trying. ACRONIS is the Problem !!!! We are using Acronis for all our customers. So just uninstall Acronis reboot and reinstall it. The Cardreader Problem is gone and everything will work fine.... Hope this helps some folks because it nearly made memad.....

More replies
Answer Match 67.62%

Hi everyone,

I have a Portege PPM81E and am unable to get the microphone working after having upgraded to Windows 7.

I've tried all the drivers I've managed to find but no luck.

Is there anyone out there with the solution?

Thanks in advance!

A:Portege M800 - Microphone doesn't work after upgrade to Windows 7

Just few questions:
Have you upgraded original Vista version hat you got with your notebook or you have installed clean Win7 version?
Are all hardware components properly installed and listed in device manager?
How do you test mic functionality?
Is Microphone listed in sound properties > Recording devices?
Is mic set as default device?

5 more replies
Answer Match 67.2%

Yesterday I reinstalled Windows 7 on my notebook PC. I had to use a Microsoft installation disk because unfortunately, serious errors resulted after I installed from the HP recovery program. Consequently the HP drivers that were installed automatically with the recovery program weren't installed on my system. I had to install several of them from the HP support site. I got everything to work except for the Touch volume control, or the Volume Scroll Zone as referred to by HP in the service guide. This is the device located just above the keyboard that increases or decreases speaker volume when you drag you finger on it. I installed the Quick Launch button driver but that only applied to the mouse and pointer touchpad. I looked at the devices listed in my startup configuration. I saw the synaptics pointing device and the HP quick launch buttons listed. So is the IDT PC audio driver.  What am I missing? Where I can I find it to activate the touch volume control?

A:Touch volume control doesn't work on dv6, looking for driver

@accordeoniste Try these. http://ftp.hp.com/pub/softpaq/sp48001-48500/sp48425.exe http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46731.exe REO

2 more replies
Answer Match 66.78%

Hello,

I have updatet my Toshiba Satellite L500-20X to Windows 8.
Unfortunately, since this update my WLAN Switch no longer works. All function keys work to F7, only F8 (WLAN switch) and F9 (touchpad) no longer work.

What can I do?

Thanks in advance.

Kind regards
Klaus

A:Satellite L500-20X - WLAN switch doesn't work after Windows 8 Upgrade

Satellite L500 is not Win 8 upgrade supported? so I think the problem is a missing driver or software?

As far as I know in order to use the FN buttons the Value Added Package for Win 8 needs to be installed.
Check other driver area for Toshiba notebook series supporting the Win 8.
Maybe you could use the VAP released for other series.

4 more replies
Answer Match 66.78%

Hello, My laptop is HP Pavillion DV6875se with Windows 7 OS. It was working great before a month, but all of a sudden the following issues came up1. The power button of the laptop doesn't turn on/off the laptop. I have to use a detachable remote to turn the laptop on. I don't see blue light on the power key, once the remote turns the laptop on.2. The quick play touch sensative keys above the laptop key board have blue light in most of them. But its flickering red for volume, and no indicator on the volume increase decrease touch region. Though some have blue indicator, red lights....none of the touch sensative keys function at present.3. The laptop touch pad is unresponsive. It has its blue light, which doesn't turn red even if the touch pad is locked. I use a USB mouse as of now.4. Laptop has 3 audio jacks. One for microphone, and 2 for headphone. The external speaker doesnt have any sound, so i have to plug in earphone everytime to listen anything. In control panel --> under sound --> playback ---> i see speakers and realtek digital output ---> both show green oscillating bars when an audio is played. But the volume key in quick play tab is flickering red all the time. The laptop is fully functional. But it would be great if the problems mentioned above gets fixed. Sincerely 

More replies
Answer Match 65.1%

Pasting in contextual information from another post. ~ OBconflicker.Bi!nf worm keeps reappearing, windows defender monitor stops working, slow computer, windows search protocol windows pop up, Malware, virusPop up windows keep appearing "Windows search protocol host stopped working and was closed" Itunes occassionally doesn't work, Media Sync doesn't work. Hard Drive keeps working in the background. Windows Defender no longer monitors the running programs.End of added information. ~ OBLogfile of Trend Micro HijackThis v2.0.2Scan saved at 8:46:00 AM, on 1/11/2010Platform: Windows Vista SP1 (WinNT 6.00.1905)MSIE: Internet Explorer v7.00 (7.00.6001.18349)Boot mode: NormalRunning processes:C:\Windows\system32\taskeng.exeC:\Windows\system32\Dwm.exeC:\Windows\Explorer.EXEC:\Program Files\Windows Defender\MSASCui.exeC:\Program Files\Digital Media Reader\readericon45G.exeC:\Program Files\Java\jre6\bin\jusched.exeC:\Program Files\Intel\IntelDH\CCU\CCU_TrayIcon.exeC:\Program Files\Common Files\Intel\IntelDH\NMS\Support\IntelHCTAgent.exeC:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exeC:\Windows\WindowsMobile\wmdc.exeC:\Windows\System32\hkcmd.exeC:\Windows\System32\igfxpers.exeC:\Windows\sttray.exeC:\Program Files\... Read more

A:microsoft windows search protocol host stopped, slow, firefox doesn't work, itunes doesn't work

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Answer Match 64.68%

Hello. I use the Windows Live Photo Gallery as my screen saver on Windows 7. When screen saver starts, it gets stuck on this one image and doesn't switch to other images. On the Screen Saver menu, if I click "Preview" then it works normally. It's only when the Screen Saver begins by itself then it won't change images. Other screen savers work fine. Thank you Boaz
 

More replies
Answer Match 64.26%

I have a Samsung series 7 Slate, which works great and is really fast with Windows 8. But with one piece of software the touch screen doesn't work, the menu items will light up but nothing happens when you press them. If I use a mouse it works fine and as it should. I don't think it's the software because I also used it on a HP 500 Slate and the touchscreen worked fine on that.

If anyone has any ideas for a solution to this problem I would much appreciate it.

Thanks in advance for any help.

A:Mouse works but touch screen doesn't!

There is a bit of a glitch when using older touchscreen hardware with windows 8.

Nearly all older touchscreen hardware is implemented as an mouse emulator. So when pressing on the screen it simulates a mouse click.

Windows 8 makes use of the touchscreen interface rather than the mouse interface for touchscreens, and the driver it installed for your touchscreen (if it installed one) may not be working too well with the hardware. If you install a driver separately for that touchscreen you may get back the mouse emulation for the touchscreen, but then some of the better options like gestures and sweep scrolling may not work well or at all in windows 8.

So what you really need is a touchscreen driver that is really a touchscreen driver (not a mouse emulator driver) for that model of touchscreen on your slate. If you know the touchscreen manufacturer you can maybe find a beta on their site for Windows 8? Find the touchscreen device in the hardware control panel and look up it's VID and PID to find the manufacturer if the driver page doesn;t already tell you. (There is a website somewhere that'll look up the VID/PID and tell you what the product and manufacturer is)

But.. may be slim chance. If not, try finding the normal windows 7 touchscreen drivers for it, that may help some, though not guarantee it'll be fully functional.

4 more replies
Answer Match 63.42%

Hi, this isn't an urgent problem, in fact it has been a problem since I installed Windows 7 over a year ago, but I have recently decided that it is extremely naïve of me to ignore the problem, because no matter how lucky I am I will need to access safe mode eventually, and that's not possible right now. Basically my computer works 100% fine (barring speed issues or any other minor complaint), including my keyboard, except when I have to hard boot my computer/power shuts off/whatever causes the computer to boot up into the "windows error recovery" screen. When I get to that screen I get four options: boot windows 7 normally (highlighted); boot windows 7 in safe mode; boot windows 7 in safe mode with networking; and one other one I believe. There's a countdown from 30 seconds and at the end of the countdown the highlighted option will be selected if I don't choose one myself with the arrow keys and enter/return. Problem is, I can't select a different option from the highlighted one. the arrow keys and enter key (or any other key) are all functionless. The keyboard is plugged in and the computer knows that because its media lights (the mute/play-pause/stop/&c. keys) are all lit up. In the past I have had to use Safe Mode for many old computers, as I'm sure most people have, and currently I don't have that option. Any help would be appreciated. Thank you in advance.
 

More replies
Answer Match 63.42%

I was initially very excited to hear that windows 8.1 allowed users to split the screen in any ratio they want (not just 80:20) in metro mode. However, no third-party apps seem to be compatible with this feature. Only Microsoft apps will expand to any ratios other than 80% or 20%. All third party apps will remain in the narrow 20% view even when you try to expand them to, say, take up 50% of the screen. This is a huge disappointment, and I haven't found this problem addressed anywhere.

Any thoughts?

A:Split screen doesn't work in Windows 8.1 metro mode.

This is probably because it is up to the app developer to incorporate in their design. Because 8.1 is still in beta, the versions of the apps that include the code for the 50:50 version aren't in the store yet.

6 more replies
Answer Match 63.42%

Keyboard Doesn't Work For Windows Error Recovery Screen. Thread problem similar to jaredthescot. Any ideas?
 

A:Keyboard Doesn't Work For Windows Error Recovery Screen

6 more replies
Answer Match 63.42%

Ugh hey me again. Please help this is driving me crazy.

About four days ago I had all my games and applications on my External Mybook connected by USB2 at a speed of 5400RPM. After finding out they could go faster on my internal I switched them over to there but during the process of moving about 3 games simutainously Vista froze and when I booted it back up explorer would freeze everytime it loaded. After this, I reinstalled Vista to grab some of my other stuff to back it up on my external in case the internal had to be formatted. Vista seemed to be working okay at this point with the Explorer working fine. In the morning I turned on the computer to find that Vista wouldn't boot up. It just went blank before showing the loading screen. I reinstalled Vista two times and the same thing happened, it worked fine and then I shut it down and then next time I booted it up it wouldn't get to to the logon screen. I then tried the same thing with XP and Win7 Build 7600 and it STILL happened. I actually thought my hard drive was corrupted and it was a old ****ty WD SE 3600 which I was intending to replace anyway so I bought a new Seagate 7200.12 and installed Vista. It installed notacibly faster by like twenty minutes as opposed to the old hard drive so I thought the problem was fixed but yeah I shut it down and bang. Not loading.

Anyone have any idea what's wrong?
 

More replies
Answer Match 62.58%

I have a Compaq Presario SR1810NX with Windows XP, it's about 4 years old - never had any problems.
The last time I turned it off, I just unplugged it.

Then the next time, when I turned on my computer it showed
" Windows Error Recovery: Windows failed to start. A recent hardware or software change might be the cause. "

I chose, "Previous Start up (the one that worked for you last time)"

When I pressed it, it went back to the COMPAQ screen with logo.

Now, my computer is stuck at the start up screen with only the COMPAQ logo.
The keyboard doesn't work - I can't press anything (I've tried ESC, F8 - nothing happens).

Please help me. What do I do??
 

A:Help! Stuck at screen logo, keyboard doesn't work, won't boot into Windows.

7 more replies
Answer Match 62.58%

I have an ASUS notebook running windows 7 64-bit. I am using the QuietOffice power profile, however the screensaver won't kick in no matter what I do, and the display does not turn off even though I set it to be after 5-minutes of inactivity. I don't know if there is something running in the background... I have turned off my usb wireless mouse, and nothing....

Any ideas?

THanks.

A:HELP: power option doesn't work - screen saver doesn't start!

This is another case of factory bloatware interfering - in this case a useless factory utility overriding Win7's superior built-in version.

Googling the Quiet Office feature of Asus there are multiple reported problems. Best to default to the Win7 built-in Power Options in Control Panel. Set up a Balanced Plan unless you're a gamer then use High Performance.

Here are other tips for cleaning up factory bloatware

5 more replies
Answer Match 62.58%

so heres the deal i have a imo touch screen that i use as a main screen (dummie) and when windows 7 uploads it doesnt show the windows symbol the screen is black until the windows startup sound comes on and the main destop comes up . is there a way i can change this in DOS so my usb touch screen will work before windows boots. i have a VGA flip down that i havent installed yet and i was hoping to get the touch screen to work in DOS

A:can a touch screen work in dos

OK, if I read that right, you are missing the Windows 7 Boot Animation. I'm not sure if these links will help but its some place to start.
No windows 7 boot animation
No boot animation for Windows 7? [Archive] - My Digital Life Forums
Oh, thats not DOS, there is no DOS in Windows 7. There is a command shell that you can launch from Windows but its not DOS. The first text based screen you see during boot up is the BIOS POST screen and or your Video cards BIOS screen.

7 more replies
Answer Match 62.58%

I have an HP ENVY TouchSmart, Windows 8.1 and 64-bit operating system and yesterday my touch screen was working fine, and today I turn on my laptop and it doesn't work at all. Keyboard works fine, mouse works fine. everything but the touchscreen. I thought it could be complications from a very recent update but It was updated on the 17th. Under my system information it says, "Pen and Touch: No Pen or Touch Input is available for this display". I don't know if that's unusual. I've restarted it, and tried steps to fix the problem like "calibrate my screen" but i can't seem to find the settings to it. In my Device Manager settings, I can't seem to find anything relating to touchscreen software, if there is any? I take good care of my laptop but I don't know the first thing about it. There is no damage to it.  When troubleshooting Hardware and Devices, "The driver for eGalaxTouch EXC7910-1037-11.01.01 is not installed."...Problems found: eGalaxTouch EXC7910-1037-11.01.01 doesn't have a driver-Not fixed. Hardware changes might not have been detected-Detected. I've checked if anything neds to be updated. I dont know what to do from here. Is there anything that I need to install? 

More replies
Answer Match 62.58%

my lap top
HP Pavilion TouchSmart 14-n033tx Ultrabook (ENERGY STAR)
Model #: F2C48PA
windows  8 64
delete windows and recovery and install windows 10 64
touch screen not work no drive found in web site hp
all vido in youtube see but not work
 
 

More replies
Answer Match 62.16%

I am upgrade HP Spectre Pro x360 G2 with HP UHD Touchscreen Controller Firmware Update(File name: sp74836) for HP Spectre x360 - 15t-ap000 CTO (ENERGY STAR). Firmware upgrade is FAILURE!  Touch screen is not work. 1. How to restore firmware? or 2. May be issue QHD Touchscreen Controller Firmware for  HP Spectre Pro x360 G2 <V1B05EA>? Thanks.

More replies
Answer Match 62.16%

I have just upgraded my laptop from Windows 8 to 8.1 (as a test before updating my much more important and bigger desktop PC), and from the start I'm having issues.

The famous split screen is not happening. Once I have opened two apps and went back to the start menu to grab one from the top left corner - it is a fixed small rectangle which I can't resize or move vertically, which moves only horizontally and the moment I let go it opens in full screen. I have seen on the various video tutorials how this is done - none of this happens on my screen. I have also seen a bar that opens on the left side of the screen with the open apps - it does NOT appear on my screen. I have the recommended screen resolution.

Is there a setting that disables split screen? if so, where? Can I open this bar on the left side to see all my open apps and programs fom any window? Can I have this split screen with traditional programs like Word and Excel? (I use very few modern apps, if any).

This is just the first hurdle. I need to sort out Windows 8.1 getting rid of all errors on my laptop before I let it anyway near my desktop. All video tutorials How To are useless if none of they are showing is happening on my screen. I have not seen one yet "How to Fix Split Screen Issues".

As a side note - if the whole download and installation process took 3 hours on a very fast internet connection on my laptop which has a fraction of programs and apps of those on my desktop - how many... Read more

More replies
Answer Match 62.16%

My touch screen key board is working but my regular keyboard is noy workingI can't type from the key board

More replies
Answer Match 62.16%

any driver for touch screen can work on win 10 for acer_aZ5610

More replies
Answer Match 62.16%

Hi, i had my motherboard replaced due some manufacturing fault. When i got my laptop back it wasnīt working quite well so i decided to reinstal operating system. I used Backup button and restored my laptop to initial settings. This got me properly working laptop with win 8.1. Afrer i upgraded to win 10 my touch screen stoped working so i did a little research and found some topics with similar problems but any of those  didnīt solve my problem. ? This is screenshot of my deice manager, that unknown USB is my touch screen ( it says: unknown USB device (descriptor request failed)). I tried uninstal this driver, when i do that my touch screen starts working for like 3 seconds and than it stops working again. By the way this is rare to see box called HID in my device manager usually it doesnīt even show up. I tried update drivers through windows update. That didnīt change a thing so i update almost every driver manually (i download all of them from official lenovo support site) . And guess what, that did not worked eather. I am not sure which other solution i tried, because am trying to solve this problem for quite long time, but i feel like i tried everything (even reinstaling win 10) and didnīt even get close to solving this issue.Do you have some idea how to solve this problem?Sorry for grammar mistakes.

More replies
Answer Match 61.74%

Hello, My Laptop came with Windows 10 Home. I upgraded it to Windows 10 pro, but now the touch screen doesn't work. Can anyone help? I've searched google and called Lenovo support, no luck.  Thanks!

More replies
Answer Match 61.74%

Is it possible to upgrade from the stadard U410 the touch model? I know my compluter uses LCD screen B140XTN02.0, but can I just get B140XTN02.3 with the touch screen and digitizer or will there be a missing connection somewhere? If there is, is there a way around that?

A:U410 upgrade to touch screen from standard

I have the same question, though slightly different. According to the service manual for the U410, two LCD panels are compatible with the U410: B140XTN02.0 non-touch and N140BGE-LB2 touch. Both have 40 pins.Can I replace a B140XTN02.0 panel with a N140BGE-LB2 panel?Thanks! This service manual: https://download.lenovo.com/consumer/mobiles_pub/ideapad_u310_u410_hmm_1st_edition_mar_2012_english.... 

1 more replies
Answer Match 61.32%

My phone has a screen lock on it. So the phone boots up and reaches the screen lock part where I can go about unlocking it and doing whatever I will with my phone. however the screen wont respond to any touch. It is an Android and the phone is a Samsung intercept.

also... :/ 3 days ago I dropped in it a puddle. I've been drying it out for few days under weak heat from a heat lamp but I tried it yesterday and I had the problem mentioned above ^. any suggestions, or am I screwed?

Thanks,
Sprinter
 

A:Smartphone touch screen won't work after booting up

I'm afraid you will have to get a new phone. Who is your wireless provider?
 

4 more replies
Answer Match 61.32%

please help me had win 7 upgraded to win 10 now my touch screen wont work please help!

More replies
Answer Match 61.32%

hello i heave a nettop mini pc and i have a 7" super sk-8802-a touch screen monitor. when i purhcased it from ebay the seller told me the drivers support windows 7 . i got it and it supports everything below xp and as well as xp. i rather see if i can get it to work rather than sending it back i heard that windows 7 has a xp mode so i can use the programs on windows 7. i found a driver for it from a website called touchkit.com but its a rar file. my thought is can i install the drivers regularly and then swap out the rar files. and help would be great.

A:my touch screen dont work .... bad drivers

If you can't get it to work I would send it back and get your money back. I wouldn't even play around with the guy he misled you and I wouldn't post a good deed done on his reputation. I have seen to many people get taken on Ebay and it ticks me off because I for one have had it done to me. I now by everything brand new from Newegg and or some place I know to be reputable.

Unrar the files to a folder on your desktop and open up device manager and right click on you new touch screen monitor and click update drivers. Then select "Browse My Computer for Driver Software" and then select "Search For Drivers In This Location" and Make sure the subfolders check box is checked and then browse to you folder and click ok then click next. It will either say it is updating the drivers ot that windows has determined that the best driver is already installed. If it says the later then try an Automatic update from windows update. Before you do though go into system in control panel and click the hardware tab and select the setings for "Device Installation Settings" and set it to these setting like below in the screenshot the go back into device manager and automatically update the drivers and it will search windows update as well to see if there are drivers available for your device.

9 more replies
Answer Match 61.32%

please help me had win 7 upgraded to win 10 now my touch screen wont work please help!

More replies
Answer Match 61.32%

Hey guys i'm pretty new to all this and have only just signed up to the forum so hope i have put this in the right place!!

Anyways i was wondering if an IR Touch panel that fits over the top of an ordinary LCD will work with windows 7 as i have seen one on eBay 32" in size (USB) Pic attached!

A:IR Touch Screen on eBay (Will it work with7)

Looking at the way he's treating it, I would be surprised if it worked at all.

5 more replies
Answer Match 60.9%

hi all,

im not an avid touch screen user ... i use it scarcely when needed or when the mouse battery dies in the middle of my work and i have to continue with the screen.

when i first bought my PC it was win8 and all worked fine... until yesterday and after about 2-3 months since i upgraded to win10, i realized the touch screen isn't working!!!!

i looked up the forum for any leads on this issues and i saw a lot are complaining about function keys being un-usable after the win10 upgrade. however i dont have that problem. only the screen got the touch element rendered un-usable.
probably, during win10 upgrade the system decided to disable this feature so no accidental touch on the screen could interrupt the upgrade process...


if anyone is aware of this problem and how to fix it ... i would truly be thankful.

thanks

A:Toshiba PX30t upgrade to Win 10 - HID touch screen issue

Originally Posted by Dhowayan


hi all,

im not an avid touch screen user ... i use it scarcely when needed or when the mouse battery dies in the middle of my work and i have to continue with the screen.

when i first bought my PC it was win8 and all worked fine... until yesterday and after about 2-3 months since i upgraded to win10, i realized the touch screen isn't working!!!!

i looked up the forum for any leads on this issues and i saw a lot are complaining about function keys being un-usable after the win10 upgrade. however i dont have that problem. only the screen got the touch element rendered un-usable.
probably, during win10 upgrade the system decided to disable this feature so no accidental touch on the screen could interrupt the upgrade process...


if anyone is aware of this problem and how to fix it ... i would truly be thankful.

thanks



so here's the deal, i went to twitter and got in touch with Toshiba USA,..
to make a long story short, he wasnt able to help me "but at least he tried"

i need the win10 64bit touch screen drivers

here is my conversation on twitter:

https://twitter.com/ToshibaUSAhelp/s...35102372708352

1 more replies
Answer Match 60.48%

Hello,

My wife's parents purchased a Toshiba Qosmio DX730 (PQQ11A model). They recently upgraded to Windows 8 and the touch screen now does not work.

The problem is missing drivers (the monitor driver is reporting as a Generic PnP Monitor).

I went to the Toshiba site and selected the driver downloads for the appropriate model and installed a number of drivers, including the recommended NVidia display drivers. There are no drivers on that site that seem to install support for the Toshiba touch screen monitor.

Are there no Windows 8 drivers available for this model? If not, is there another solution? If so, where can I find them. Any help very much appreciated as they have a nice computer and purchased Windows 8 so they could use it with the touch features.

Thanks.

A:Qosmio DX730 and Win8 - touch screen does not work

Hi

On the Toshiba EU driver page you can find the Win 8 drivers.
As far as I know you need to install the Toshiba display driver to get the touch function working properly.

I found this driver.
Please check if you can install this:
[Win 8 TouchScreen Software for Qosmio DX730|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=366&selProduct=7338&sel ShortMod=null&language=13&selOS=40&selType=all&yea rupload=&monthupload=&dayupload=&useDate=null&mode =allMachines&search=&action=search&macId=&country= all&selectedLanguage=13&type=all&page=1&ID=83418&O SID=-1&driverLanguage=42]

2 more replies
Answer Match 60.48%

Hi HP Support Greetings from Latin America, we have a HP Pavillion All in one 27-n001la, mainly used by my 5 years old daughter, with all her educative games. Since the upgrade to Windows 10, touch screen is not longer "touch", and we cannot find driver available at the website to solve this issue, which btw, is quite relevant for my daughter as she still doesnt have any control of the mouse. Hope you can help us. Warm Regards from Chile Carolina

More replies
Answer Match 60.48%

I get a black screen (with backlight).No hard disk access,input output system does not work (It does not turn on/off CapsLk or NumLock).The CPU is not working! Only a long holding the power button turns off the computer.1) my OS installed from the Microsoft Download Center (?winver? into: release 1511,build number 10586,494)2) all drivers are updated from the support center Y700 Touch-15ISK Laptop (ideapad)   (including (ACPI) Driver.)3) I do not install any utility from Lenovo.4) I get a black screen when my laptop is connected to AC power and when running on battery power.5) Power plan is set up by default (Not Configured) 6) I never get problems in High performance mode with connection to AC power (Minimum processor state : Plugged in 100%). I attach my system log




Y700-15ISK Touch/BIOS: CDCN35WWi7-6700HQ/GTX 960M/(RAM) 16,0 /LITEON CV1-8B512

A:Y700 Touch-15ISK .Black screen.The CPU is not work...

You can press the novo buttonGet into the bios and set legacy boot up .And insect the Windows installion cd to fix

2 more replies
Answer Match 60.48%

chrome://flags only help until my yoga 700-11isk ideapad reboots the next time and the touch screen does not respond to scroll. 2 fingers.  anyone has a more permanent solution?

More replies
Answer Match 60.06%

Dell Vostro 355 laptop running W7 Pro. Updating thru Assistant. Returns to previous OS (7 pro) after reaching approx.. 85% of files copied. Updater says unknown error. have cleaned all files and registry and run virus scan. Have 300GB space free. What am I doing wrong.

A:WXpro upgrade doesn't want to work!!

sounds as if the upgrade file is corrupt.
delete it and redownload and retry.

2 more replies
Answer Match 59.64%

Gday all.
Just curious on 2 upgrades. I am looking to see if a Touch Screen is available and/or if the GPU is upgradeable. I notice that my Ram/CPU usage isnt fully used when I play games but my GPU is.I play games such as CS:GO (Counterstrike Global Offense), Rust and rocket league. They dont run too badly, but I'd prefer a better frame rate. I currently am using a Dell Inspiron 15" 5000 Series laptop.
Specs: 
 - i7 6500U 2.5Ghz,  2.6Ghz turbo
 - 8Gb Ram (DDR3 I believe, speed im unsure of)
 - R5 M335
 - Windows 10 64-Bit
----------------------------------------------------------------------------------
I do believe the model is a 5559 however not too sure, as for some reason it doenst describe it on the box etc.... However I do know the MPN.

A:Dell Inspiron 15" 5000 Touch Screen!?!? GPU Upgrade? CPU Possible Bottleneck?

The GPU is not upgradeable - it's a chip soldered to the mainboard.
The screen is technically upgradeable, but the cost of upgrading will likely approach or exceed 50% of the original cost of the system, as the entire top half of the system need to be replaced.

3 more replies
Answer Match 59.64%

Hello,

I'm having problems with my built-in speakers, I have a "HP" computer and the built-in speakers were working well when I had Windows 7 OS, then I upgraded to Windows 10, and now there's just a red "x" at the volume control.
I tried installing this driver: sp45625.exe 
since I saw it worked for someone using windows 7 so I thought to try it but no success.
On device manager I see: http://prntscr.com/bbu7ne
Can someone please help me? I'd be very grateful. :) 

More replies
Answer Match 59.64%

Hi,

After I upgraded my windows ultimate to SP1 my rdp stopped working.
My remote settings now look like this:


I can't find any reason why this would have happened.
Does anyone have any idea what I can do to solve this, without reinstalling windows/sp1?

A:Remote Desktop doesn't work after upgrade to SP1

Me too, did You find solution?

9 more replies
Answer Match 59.64%

I tried upgrading a Home Premium Installation with a Professional Technet Disk and found that it deferred to an Any Time Upgrade that had to be purchased separately (with an Anytime Upgrade Key). Has anyone found a way to upgrade with a Full Version Disk?

A:Upgrade w/Full Version Doesn't Work

If I'm reading your post correctly then you can't upgrade from Home Premium to Professional..

You can perform a clean install.

4 more replies
Answer Match 59.22%

i have a CGV ray liner ts Universal LCD Touch Screen Remote Control and it wont work on anything i've tried all the codes and the search through the library and nothing is working it can control six things and i only want it for my tv, set top box, and dvd player.
i hope someone knows more than is the user manual (which i read hundred times)
 

More replies
Answer Match 58.8%

I upgraded my Gateway All in one Gz7108 computer from Vista Home Premium to Vista Ultimate. Now the "Eject CD Key" on the keyboard no longer works, except during bootup before the Windows progress bar, then it will work. I can still go to eject in the right click menu for the CD drive. Anybody have any suggestions?

A:Vista Ultimate upgrade now eject key doesn't work

You need to install drivers for your hotkeys to function, I know because my Dell Inspiron 9400 and ASUS A6Je hotkeys (volume, eject, brightness and wireless) dont work without drivers.

My suggestion is to go to the Gateway site and download all drivers for your PC specified for Vista. The name of the package may be: "hotkey drivers", "chipset drivers", "Utility drivers", "Function drivers"... OR look for your driver cd.

Hope this helped.

4 more replies
Answer Match 58.8%

System had WIndows 8, upgraded to Win 10 and then wiped and reloaded with a fresh Win 10 install.To try and fix the "plugged in and not charging" issue, I installed the F.68 Rev A firmware dated July 26, 2016.  System won't boot to WIndows, says no OS installed.  When I switch to legacy mode I can boot (slowly) and run Windows.  I tried all the previous versions on the website but they all say they aren't compatible.  The ALT-B fix doesn't work to roll back the firmware.   I even did a full system restore of an Acronis True Image backup from pre- upgrade and it doesn't make a difference. System didn't have the HP PC Hardware Diagnostics UEFI so I installed the version from the website but it can't find a version to roll back to and none of the versions on support seem compatible. Can someone tell me where to get to correct firmware to load to fix this problem?

A:How to restore the correct BIOS when an upgrade doesn't work

System info is: Product# E3508UA#ABLModel: 15-j078caRev: 1963-100

1 more replies
Answer Match 58.38%

hi all, I'm having an ipod touch connected to my computer for music purpose. but recently, windows doesn't recognize it anymore.
can some one help, please!!!!!!!!!!!!!!!!!
 
thanks in advance 

A:windows doesn't recognize ipod touch

Do other computers recognize this Ipod Touch - try the simple things first - different cable, then different computer.If another computer will not recognize the ipod then it is most likely a problem with the ipod.

3 more replies
Answer Match 58.38%

Hi.I've been attempting to upgrade the hard drive on my acer aspire 4920. from 120gb to 320 gb .Tried using recovery disks but after successful install I get the restart message then nothing on reboot.Also tried cloning the original disk to the new drive but still no luck. (get the restart loop)Been considering updating to the latest bios (version 1.21) but leaving that action open as a last resort.Anyone help with this?

More replies
Answer Match 58.38%

Hi.I've been attempting to upgrade the hard drive on my acer aspire 4920. from 120gb to 320 gb .Tried using recovery disks but after successful install I get the restart message then nothing on reboot.Also tried cloning the original disk to the new drive but still no luck. (get the restart loop)Been considering updating to the latest bios (version 1.21) but leaving that action open as a last resort.Anyone help with this?

A:Acer aspire hard drive upgrade doesn't work.

You didn't say which OS you have but with Windows 7-up you should be able to create a recovery flash drive and save a system image on a hard drive. Then use the recovery drive to restart the machine with the new disk and when asked, tell it to recover from the system image you saved. ps this works if going from a smaller to an equal or larger disk but not to a smaller one. 

1 more replies
Answer Match 57.54%

Updated to Windows 10 from Windows 8.1 two weeks ago.
Had problems with Firefox.  Tried to download to replace existing Firefox.  CNET site appeared to be correct but something seemed wrong so I killed the download. But.
- The windows start menu doesn't come up when I click on the icon, but if I right-click, a text menu does appear and lets me, for example, shut down.
.- If I click on the Windows End icon in the task bar, the screen flashes but End does not come up.  Ditto for the Windows Store icon.
-  Somewhere SpyBot S&D was erased, but I was able to download it.
- If I double-click on a photo in Windows Explorer, I get a popup that lists the name of the jpeg and says Invalid Entry to Registry.  If I right click on the photo and go to any of the options the photo is opened except if I choose Photo.
- Firefox cannot properly display the Yahoo mail page, though Pale Moon and Opera can.
- I have Avast Anti-Virus and MalwareBytes Anti-Malware and when I run their scans, they find no issues.
 
SO there are a few issues that I need help with.
 

A:windows 10 problems - start menu doesn't appear, windows key doesn't work, etc

Hello,
Well the first thing you should try is to Run System Restore to before all of these problems started or to when you first installed Windows 10.
Then try to download Firefox from there website
https://www.mozilla.org/en-US/firefox/new/
Third thing is I would recommend to get rid of Avast it is low end and could be allowing virus I recommend ether McAfee or Norton Security.

Those are some things to think about
but it is all up to you when making your final decision

5 more replies
Answer Match 57.12%

Cant get it to updateand when i use thr troubleshooternit doesnt work either
 
Farbar Service Scanner Version: 21-07-2014
Ran by Administrator (administrator) on 03-01-2015 at 16:34:05
Running from "D:\Users\Administrator\Downloads"
Microsoft Windows 7 Ultimate  Service Pack 1 (X86)
Boot Mode: Normal
****************************************************************
Internet Services:
============
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.
Windows Firewall:
=============
mpsdrv Service is not running. Checking service configuration:
The start type of mpsdrv service is OK.
The ImagePath of mpsdrv service is OK.
MpsSvc Service is not running. Checking service configuration:
The start type of MpsSvc service is set to Disabled. The default start type is Auto.
The ImagePath of MpsSvc service is OK.
The ServiceDll of MpsSvc service is OK.
Firewall Disabled Policy:
==================
System Restore:
============
SDRSVC Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
System Restore Disabled Policy:
========================
Action Center:
=====... Read more

A:Windows 7 doesn't update and troubleshooter doesn't work

Hello,
 
Please follow the instructions Here to run the System Update Readiness Tool. When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:C:\Windows\Logs\CBS\CheckSUR.logC:\Windows\Logs\CBS\CheckSUR.persist.log

1 more replies
Answer Match 56.28%

Can we replace the capacitive touch controller or is it fixed?

A:Can one capacitive touch screen be replaced by a resistive touch screen?

Can you please provide more details?
What device do you mean?

2 more replies
Answer Match 56.28%

hi from a new member.

i have a advent ua1 tablet pc 900mhz celeron running windows xp and the touch screen is not very accurate . i installed window 7 and i am amazed at the differance and how well the touchscreen works only prob no drivers exist for my embedded sound. so its back to xp for the moment . does any one no if i can run windows 7 touchpack in windows xp pro.

thankyou ......
 

More replies
Answer Match 56.28%

After I installed service pack 1, the splash screen on my sound card "sound blaster Audigy" doesn't work. I tried to uninstall and reinstall the program. I also cleaned the regestry from a reg. cleaner, but nothing. I also called tech support from the sound card and they could not help me.

Any ideas on how I can get this to work. Thanks.

P4 2.0
XP Pro
512 ram
sound blaster sound card
 

A:Splash screen doesn't work after SP-1

6 more replies
Answer Match 56.28%

I followed the instructions in help but clipboard did not copy the screen. With or without pushing the alt key. It still had my last copy of a link address. While we are at it where do I go to get rid of the big bar across the bottom of my new 24 in whooperdooper back lit led display that makes it to about a 17 inch display. None of the tool bars are activated. Have a nice day.

A:Screen Capture doesn't seem to work

Hello Dgudgel,

See if this may be able to help.

Screenshot with Paint

and

Screenshot and Upload using MWSnap

Hope this helps,
Shawn

9 more replies
Answer Match 56.28%

Granddaughter dropped her laptop (that I purchased). The screen is now just black. I want to replace the screen, however, I've been told that I might need to purchase the digitizer also. How would I be able to know if I need that and what are the part names or numbers for this total repair? 

A:HP m6-1105dx screen doesn't work

Hey @Hbbytes,Welcome to the HP Support Forums! This is a great place to find solutions and help from our community! I wouldn't be able to tell you the exact parts you'd need, or the price of the repair. It would all depend on what the issue actually is. You'd have to call in to find that out. Please use the following http://www.hp.com/contacthp and create a case for your issue and contact HP. If you live outside the US/Canada, please click the link below to get the contact information for your region.http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html Please keep me posted.  You can always say thanks by hitting the Thumbs Up button below!Cheers,TechSurge.

1 more replies
Answer Match 56.28%

My screen doesn't work. I updated my Windows 10 (not sure if I have the 32 or 64 bit system), waited until it was done, and then closed my laptop. Now, when I boot it up, I can hear it boot up, and the light for my caps lock flashes. I've tried removing the battery, waiting about 30 seconds, then putting it back. I've also tried removing it completely and just using the plug in charger (not sure what it's called, it's the wall charger to the battery). I've tried turning it off and on multiple times. I don't have an external monitor, and I don't have a monitor scrolling key on my keyboard. Is there anything else I can try before having to take it in to a professional?

More replies
Answer Match 56.28%

I have un/reinstalled my xp windows...my problem is my screen saver doesn't work now.I had same problem when I installed the windows first time in my pc. I got the solution in that time by calling the technical support. They asked my to disable a file , then the screen saver did work..Now I forgot that file name and I have same problem again but no techincal supprt anymore.
Anybody can help me to get the screen save works again,please?
THANKS
 

A:My screen saver doesn't work

Hello ayad kachou. The simplest thing to do is call the tech support guys again and make a note of the offending file.
 

3 more replies
Answer Match 56.28%

Starting about a week ago I was unable to go into full screen mode when using youtube and possibly other programs but I'm not sure. Can anyone give me help on how to fix this problem? When I click the full screen button it just goes to a blank screen that has a dark gray color. thanks in advance

-k

More replies
Answer Match 56.28%

Hi, can anyone advise me? Since I downloaded Windows 7 Professional my screen saver doesn't work! I have put in 'Photos' and it works when I preview in Control Panel, so I 'apply' and 'ok' but then nothing happens! What can I do?

A:My screen saver doesn't work!

Hello VeronicaMary, Welcome to SevenForums.

How about the time how the screensaver takes effect?
maybe you set it too high or maybe a display driver problem...

another reasons why screensavers wont execute are;

running activity in your pc or sudden movement of your pointing device...

hope our gurus will help you further.

9 more replies