Tech Problem Aggregator

Need Help Registring A Manually Installed Programme

Q: Need Help Registring A Manually Installed Programme

Hi,
I Have Manually Installed this programme (San Andreas) An there is a special programme that mods san andreas and when it starts up it says:
I have put the folder in this location:C:\Program Files (x86)\Rockstar Games\San Andreas
So any help to register this programme.
Thanks

A: Need Help Registring A Manually Installed Programme

did you buy it?

8 more replies
Answer Match 55.86%

service-pack
Downloaded and ran System Update Readiness Tool (KB947821)
Readiness tool indicated a (KB947821) Hotfix ran.
- Installation: Successful -
Ran Windows Update - Window7 SP1 not offered.
<< Went to service pack center >>
Service Pack Center - Microsoft Windows
Selected "Download SP1 from the Download Center (Advanced)
Download: Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932) - Microsoft Download Center - Download Details
Norton Antivirus "Disabled"
Downloaded "Windows6.1-KB976932-x64.exe"
"Installation was not successful"
Error:ERROR_SXS_ASSEMBLY_MISSING(0x80073701)
Searcing for a fix to ERROR note:
SP1 setup fails "ERROR_SXS_ASSEMBLY_MISSING(0x80073701)" - Win7 x64
NOTE:
Have run MS Fixit many times. it always tells me "Windows Update componets must be repaired", but when I run Uniblue RegistryBooster 2011, it always remove the same fix MSFix made
"The default value in HKEY_CLASSES_ROOT/CLSID/{5F327514-6C5E-4d60-8F16-D07FA08A78ED}/InProcServer32points to the missing file C:/Windows/system32/wuaucpl.cpl"

My system started out as a Windows Visita Ultimate with an upgrade provided by HP to Windows 7 Ultimate.
Also don't know if these failed installations are related the my failed SP1 installation;
KB958488
KB982670
KB2538243
KB2467174
KB2467175
KB917607
KB982526
KB973923

A:Can not get SP1 to be offered or installed manually

  
Quote: Originally Posted by VincentM


Have run MS Fixit many times. it always tells me "Windows Update componets must be repaired", but when I run Uniblue RegistryBooster 2011.....



...and thereby is your problem.
ALL registry Cleaners come under the heading of 'Dangerous:Snake-Oil'.

Ditch it before it manages to completely trash your system (AFTER undoing whatever it's already managed to break)

3 more replies
Answer Match 55.86%

So a couple of weeks ago or so I installed ie10 manually. All fine and good and works well. Today ofc ie 10 comes in windows update so I figure its an update or something and install it. When I reboot its again in windows update even though I installed it already. Also in 'Installed updates' 2 entrances show with ie10. I dont really foresee a huge problem with this but Im still wondering if you have any ideas on how to fix it?

A:Ie 10 installed manually, still shows up in WU and won´t go away

Hi Conditioned, uninstall it then let WU replace it or try it manually again like this:- Attachment 259099

Attachment 259098

6 more replies
Answer Match 55.86%

Greets Everyone.
Thank you for the incredibly helpful forum!!

I have a weird issue that has cropped up with my Windows 7 Ultimate 64 bit. I decided to upgrade the version of my Scite and there were no options for installing it. I simply unzipped the archive and copied it to a new folder in my Program Files (x86) folder. I then renamed my old winscite to bust the links, keeping it in case something went wrong, and created new desktop, startmenu, and taskbar links to the new version.

The application opens up just fine, and works just fine. But when I want to use it to open specific file types/extensions, I cannot use it. I tried right clicking on a file, say a PHP file, and then chose Open with.../Choose default program from the right click context menu in Windows Explorer, and of course, Scite is not listed in the recommended programs options. I expand "OTHER" and still do not see it, of course. So I clicked BROWSE, navigate to the new scite, and double click it. This is where the weird stuff starts. The browse dialog box closes, yet scite is not an option still. Nothing changes actually.

Scite is not listed as a default program, and I cannot add the new scite as one. I have no idea how I can tell Windows that I want to open the new scite with ANY file type.

Is there a registry modification I need to perform? How do I remove ALL options/recommended apps associated with a file type? Then maybe when I double click that file type, I can tell Windows where to find s... Read more

A:Manually Add an Application that was Not Installed

Quote:
So I clicked BROWSE, navigate to the new scite, and double click it. This is where the weird stuff starts. The browse dialog box closes, yet scite is not an option still. Nothing changes actually.


You have to double click on the .exe of that program.

4 more replies
Answer Match 54.6%

I bought an Asus N550LF-CM115H two months ago and replaced the HDD with as SSD in order to maximize performance.

The laptop has incredible start-up times, showing that the SSD is most definitely the drive on which the system is running, and can open programs pretty quickly. However the general performance of the computer is buggy. For example, while typing this, the letters are noticably coming up several split seconds after typing them. It has great trouble running web browers (I've tried Chrome, Firefox and Explorer) without eventually having a script fail or the browser become unresponsive.

It's usable, and occasionaly the performance is very good, but there is definitely something wrong somewhere. Any tests I can run to check where? Any ideas on what the problem might be? Any ideas on how I could go about fixing this?

Thanks a lot.

A:New laptop running on a manually-installed SSD is buggy

That could be anything and may have nothing to do with the SSD. For starters I would run a sfc /scannow

15 more replies
Answer Match 54.18%

After repeated problems with the update failing I did a clean install and installed kb3200970 manually from the windows catalogue and it shows as an installed update. Windows automatic updates wants to download and install it again. Is this really necessary? Any way to make it stop???

More replies
Answer Match 54.18%

BIOS setting: SATA AhcI
partition 1: xp
partition 2: 7
both boot,. but I want to use virtualbox to boot xp within 7
both are installed with SATA Ahci drivers, but the XP drivers do not work within Virtualbox (presuambly because the SATA chips are a bit different than what virtualbox emulates.
XP boots directly, but crashes on startup within virtualbox

I know I need this driver, but
A) it refuses to install because when booted my chipset is different
b) I cannot figure out how to extract the files
c) I don't know how to manually install them

help?

A:Manually install SATA drivers in XP partition, already installed?

SATA Drivers - Slipstream into Windows XP CD

This is a good place to start.
Mike

5 more replies
Answer Match 54.18%

Co-worker wanted me to look at her computer to fix some problems. I found virus(es) had hijacked ie. I tried malwarebytes, etc. and switched to firefox and tried to run windows update but endless search yielded no updates.

I reinstalled the OS from original disk -- Vista Home Basic 32-bit.

I manually installed SP1. I then manually installed SP2. Tried updates again. Forever looking and no updates.

Could someone outline my next moves to be done to head towards a fix for this updating problem? I would appreciate it. I see that there posts with similar problems and I am not sure which ones I should try or do I need to do something else before I start manually downloading updates?

Thanks,
Don

More replies
Answer Match 53.76%

I have several Type 1 fonts that I installed manually and now want to uninstall. When attempting to delete through the Control Panel route to Fonts, the error message is that the fonts are in use and cannot be deleted. No programs are open. When attempting to delete or change permissions through the CMD window, the error message is access denied. When attempting to change the read/write permissions on the Fonts folder, and clicking ignore on the many system fonts that Windows installs by default, I still cannot get access to these three fonts. Interestingly, this r/w permissions approached worked several days ago for several other Type 1 fonts that I installed manually.

Suggestions?

Thanks in advance.

A:Access denied (to delete) Type 1 fonts installed manually

Try booting into safe mode, then uninstall them...

5 more replies
Answer Match 36.96%

will help remove personal files from a computer - but still leave e.g outlook express/internet explorer/your games etc. I am asking for a friend who wants to sell her computer but is afraid of leaving personal stuff on it/or not being able to find it!!
A free download programme would be even better!!
Thanks
 

A:Do you know of a programme that???

I know a program that does all kind of tweaking, file deletion, etc but it depends on the windows system. For example I have Win ME so I can use "tweak ME" program from http://tweak-me.de and it includes a file shreader that works for me. Since I dont know your ver I cant give you an exact address that would work for you. But you might be able to find a link for yourself. A trial ver should be aviable.
 

3 more replies
Answer Match 36.96%

Hi,

Can anyone help me?

I have been searching the net for some easy to understand details of how to remove the Win Min programme that I get when ever I shut down, it states programme can't shut down unsaved date will be lost. I also think it is effecting Explorer by defaulting my home page to various search engine and naughty sites. I have tried to understand many suggestions on the net and I have run the following spyware scans and removal tools CWshreader, spyguard, Adaware, and used my Norton 2004 scan all to no avail.
I have downloaded Hijack this and this is the following report:

Being faitly new to this IT stuff I have no idea which one to check and delete, hope someone can help me as it is driving me insane. I have located winlgn.exe in start up and have heard that needs to be deleted however it will not let me, i just get a message that it might be write protected or currently open

Logfile of HijackThis v1.97.7
Scan saved at 22:45:18, on 18/06/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Sh... Read more

A:Win Min programme

I appear to have fixed my Win Min problem, I was having difficulty deleting the Winlgn.exe from start up as it stated it was either write-protected or currently open. So I went to the task manager and under the processes tab found that winlgn was an operating process. I closed it down and then deleted it via Hijack this. Horray, I was getting really annoyed with it.

This said, I cannot stop IE defaulting my home page to the following:

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://your-searcher.com/sp.htm
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://your-searcher.com/index.htm
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.tiscali.co.uk/
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = res://topoz.dll/index.html#37049
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = res://C:\WINDOWS\system32\topoz.dll/sp.html#37049
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = res://topoz.dll/index.html#37049
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = res://C:\WINDOWS\system32\topoz.dll/sp.html#37049

I have run a check on CWShreder, Adaware, Spybot and they do not identify this problem. When I run Norton 2004 scan it identifies several issue although when i press delete against each issue it stated delete failed?.

Any advise would be gratefully received, by the way a great site, I didn't know there were so many virus... Read more

1 more replies
Answer Match 36.96%

Hi there,

I installed a programme from PC format magazine, basically it was a windows vista theme. It seemed to slow up my computer so i tried uninstalling it. Some of the theme has gone and some of it is still running, i also get the command prompt each time i boot up (See attached)

I've also attached my hijack log too...

Can anyone help me get rid....??

Cheers...

Logfile of HijackThis v1.99.1
Scan saved at 18:11:38, on 04/03/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16414)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\system32\gearsec.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Alwil Software\Avast4\ashMaiSv.exe
C:\Program Files\Alwil Software\Avast4\ashWebSv.exe
C:\WINDOWS\system32\wuauclt.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\rundll32.exe
C:\Program Files\Thomson\SpeedTouch USB\Dragdiag.exe
C:\PROGRA~1\ALWILS~1\Avast4\ashDisp.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Google\GoogleToolbarNotifier\1.2.1128.5462\GoogleToolbarNotifier.exe
C:\PROGRA~1\INCRED~1\bin\IMApp.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\WinRAR\WinRAR.exe
C:\DOCUME~1\Mark\LOCALS~1\Temp\Rar$EX... Read more

A:Can't get rid of this programme...

Go on the web and look for a program called "MoveOnBoot" from "EMCO".
I found it, and it worked for me. Here's how it works: It asks you to select
the program to move or delete, and then on the next reboot, this program
will remove the one you chose before the regular startup procedure can
get it loaded into memory, or wherever. So when that next reboot is done,
the offending program is no longer there. This works even if you can't shut
down a running process, because it gets it before it can start up on reboot.
Let us know how you make out with this, please.
 

2 more replies
Answer Match 36.96%

Hi Guys, does anyone know of a free VCD Burning programme?

I have tried a couple but they seem to be limited to about 300MB if i try to burn something.

I only have a CD Writer.

Many Thanks
 

A:VCD Programme

8 more replies
Answer Match 36.96%

I am trying to find a method or programme to do the following:
 
1. To make a data list of companies upon which I can click and this will link me in turn
 
2.  A page or spreadsheet  on which I can then add charts etc, and from this or the data list of "1"
 
3. to the website of the company.
 
Can anyone help,my computer has Windows XP home?
 
Thank you   Foulkesy91

A:programme

Not sure what you mean...but it seems to me that you may be interested in what I do to obtain easy links for assisting others.
 
I have a folder of Favorites titled Computer Help.  When I come across something on the Web that I believe may be useful in the future...I just save it to that folder, giving it a title I believe appropriate.
 
Then I use a small program called Bookmark Wizard to create an alphabetical list of all titled websites.  This list is generated in .htm ormat and reflects the titled I gave, along with the URL.  Clicking on a title takes me to that link/webpage, assuming that it hasn't changed.
 
I move this list to my desktop and click the title to go to the reference...or just insert it into a post if I want to make it available to a given member as part of one of my posts/responses.
 
I constantly update this, adding new links when I come across one that seems useful.
 
To check the status of the links...a wise procedure since they may change...I use a program called AM Deadlink.  I check before generating an updated list for my desktop.
 
So I have a handy reference of over a thousand links...and only have to scan the list (using IE's Edit/Find On This Page function...to find the reference I might be looking for.
 
Louis

1 more replies
Answer Match 36.96%

I currently use Word 97 and use Windows XP. I have the chance of upgrading to Word 2000. If I do this, am I likely to have any problems e.g will I loose all my word 97 letters etc or do they just transfer to Word 2000. Also, is Word 2000 a better programme? thanks
 

A:Can i use this programme?

8 more replies
Answer Match 36.54%

Hi there

I did a searc for gay_sexy_gb.exe on google and this site came up - it said to d/l and run HijackThis... so I did and here's the results:

Logfile of HijackThis v1.99.1
Scan saved at 17:51:34, on 05/12/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\EPSON\EBAPI\eEBSVC.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton AntiVirus\AdvTools\NPROTECT.EXE
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\Security Center\SymWSC.exe
C:\WINDOWS\system32\keyhook.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOWS\system32\rundll32.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\Java\jre1.5.0_09\bin\jusched.exe
C:\Program Files\Common Files\InstallShield\UpdateService\issch.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\HomeKeyLogger\KeyLogger.exe
C:\Program Files\Messenger\msmsgs.exe
C:\PROGRA~1\Sony\SONICS~1\SsAAD.exe
C:\Program Files\Belkin\Bluetooth Software\BTTray.exe
C:\Program Files\Ulead Systems\Ulead Photo Express 4.0 SE\CalCheck.exe
C:\Program Fi... Read more

A:Horrible Programme that I can't get rid of!

9 more replies
Answer Match 36.54%

I am running widows XP home edition, service pack 3, and today I have noticed a programme not responding everytime I restart my machine. Im a little concerned. The message sy programme "Should Not See Me" is not responding. Does anyone have any idea what this might be and how I can stop it? Thanks in advance

A:Programme Not Responding

Hi widowmaker,

It sounds like malware to me. Scan for malware. I use SpyBot and SUPERantispyware. Others are good also.

Best regards,
Mack1

3 more replies
Answer Match 36.54%

I have recently upgraded from Win XP to Win 7 Pro. Sigh.

For many years now my working diary has been based on Lotus Organizer, which was given away by a magazine in the dim and distant past. I now need to install this onto my shiny new Win 7 machine, but having inserted the CDROM I'm advised that it is not suitable for Win 7. I can't even open the contents to try the right-click troubleshoot procedure and install with backwards compatibility.

I really need to install this programme - newer replacement programmes come with a steep learning curve and bells/whistles which I don't need. I don't want to go down the path of the formalised Win XP Mode with its emulation scenarios unless it is absolutely essential.

Any advice would be appreciated ...
 

A:Solved: Win XP programme to Win 7 Pro

13 more replies
Answer Match 36.54%

thanks for reading this and sorry if my english is not good.
i have a problem with my internet conexion. 20 or 30 minutes after i have switched on my conexion it becomes slow and finally dies with no possibility of resuming. when i close windows i got a strange message i have not read previously "ending programme: n".

this is hjt log
Logfile of Trend Micro HijackThis v2.0.3 (BETA)
Scan saved at 13:17:26, on 22/02/2010
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Acer\eManager\anbmServ.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wscntfy.exe
C:\Archivos de programa\Synaptics\SynTP\SynTPLpr.exe
C:\Archivos de programa\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\Arcade\PCMService.exe
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Archivos de programa\Jazztel\Jazztel ADSL USB\dslmon.exe
C:\Archivos de programa\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\wuauclt.exe
D:\Testsets\TrendMicro\HiJackThis\HiJackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.jazztel.es
R1 - HKLM\Software\Microsoft\Internet Exp... Read more

More replies
Answer Match 36.54%

Hi i need to edit an mp3.. i have a song and it sounds better if i change the play speed in wmp to 1.3

how do i edit it so it normally plays that fast to put it on my phone?

Josh
 

A:Need an mp3 editing programme

6 more replies
Answer Match 36.54%

hi all.

prob a daft question but I cannot delete messages in my outbox that wont send. any ideas how to do this????

thanx all

A:win 8 mail programme

Turn the air plane mode off and try again to see if it works.
Airplane Mode - Turn On or Off in Windows 8

3 more replies
Answer Match 36.54%

Actually i installed an Nokia PC suite in my computer, i don't need it now when i'm trying to remove it my PC gets hang. How to uninstall it please help.

A:Help want to uninstall an programme.

Welcome
If this is the right cleaner for your version os PC Suite, use Nokia PC Suite Cleaner
Download Nokia PC Suite Cleaner 7.1.1 Free - Easily remove all the traces left by Nokia PC Suite - Softpedia

5 more replies
Answer Match 36.54%

Hi,
I've been trialling XXClone for a while but I've not been 100% happy and today tried to uninstall it but with no success.
I've tried to uninstall via Windows add/remove and all appears to go well - but the software is still on my machine.  I've tried to uninstall using Revo Uninstaller - but the software is still there.  I also tried uninstalling via the start/run box - xxclone /uninst - no luck.  I've tried to uninstall using XXClone's uninstaller directly but the result is always the same.  I've even gone through the registry and removed any references to XXClone I can find but it just sits there on my desktop!!!  There may be some I've missed, I don't really know my way around the registry too well.  I don't mind going in there and having a look...
 
Incidentally it's Freeware Ver. 2.08.0.  I've tried to re-install and that goes as expected, I've then uninstalled - and that goes as expected, all the appropriate messages coming up on screen after which the software is not listed as installed in either Windows add/remove or Revo - but the XXClone icon is still on my desk top!.  I click on it and the software appears to run! I've not gone the full distance and attempted to make a clone as I don't want my second hard drive overwritten, but what appears on my desktop is definately not just a dead link to the software.
What IS happening?
Does anyone know if there is a dedicated uninstall software to completely remove XXClone?
I ha... Read more

A:Can't uninstall a programme off my XP Pro...

1.  Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 
2.  Please download and install Speccy to provide us with information about your computer.  Clicking on this link will automatically initiate the download.  

 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.
 
Louis

9 more replies
Answer Match 36.54%

Helo all,

This has probaly been asked loads i dunno, but what would be the best p2p programme to get

i used things like limewire and bittorrent in the past but have not used a p2p programme in ages, so whats new out there?
 

A:P2P Programme recomendations

Ares is the best one I find that does not take up alot of HD space and also not alot of system resources!
 

7 more replies
Answer Match 36.54%

i heard anti-trojan and TDS-3 are good ones

any recomendations?
 

A:what is the best trojan programme?

Some anti-trojan reviews.

http://www.anti-trojan-software-reviews.com/
 

2 more replies
Answer Match 36.54%

hi,

i have written a java programme for a uni project, this is what i have done. I've been trying for hours and hours but i can't get it to work. Can any java savy person in here point out the error? Thanks so much.

import java.io.*;
import javax.swing.*;
import java.text.*;
import java.awt.*;
import java.awt.event.*;
import chapman.graphics.JPlot2D;
public class oneEnginefail {

//assign all the constants
//declaration of variables
final static double
rho=1.225, //air density in kg/m^3
S=20, //wing surface in m^2
W=50000, //weight in N
alpha_0=-2, //zero lift angle of attack in deg
Cl_alpha=3, //angle of attack gradient in rad^-1
Cl_max=1.2, //cl max
g=9.81, //gravitational constant in m/s^2
dt=1, //time interval in sec
dtheta=5.1, //rotation gradient in deg
e=0.86, //oswald factor
A=12, //aspect ratio
hs=10.7; //screen height

final static double
muRoll=0.02, //roll friction coefficent
muBrake=0.22, //brake friction coefficent
Cd_0=0.03, //cd0 with no engine failure
Cd_0_fail=0.035, //cd0 when one engine fails
T=25000; //thrust in N for 2 enignes

public static void main(String[] args)throws IOException {

double vx[] = new double[1000000]; //creation of an array to store forward velocity
double vy[] = new double[1000000]; //creation of an array to store vertical velocity
double v[] = new double[1000000]; //creation of an array to store the true airspeed

vx[0]=0; //initial forward velocity
vy[0]=0; //initial upward velocity

double distance[] = new double[10... Read more

A:my java programme please help

Hi netgearboy,

I've had a look at your program and it crashes in the while(altitude<=hs){ loop at the line :
vx[i+1]=xSpeed(ax,vx);

ArrayIndexOutOfBoundsException : the value of i+1 = 1000000

Also, the class WindowHandler is useless as you may add a close option to your JFrame instance fr :
fr.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 

1 more replies
Answer Match 36.54%

Helo all,

This has probaly been asked loads i dunno, but what would be the best p2p programme to get

i used things like limewire and bittorrent in the past but have not used a p2p programme in ages, so whats new out there?
 

A:P2P Programme recomendations

Ares is the best one I find that does not take up alot of HD space and also not alot of system resources!
 

7 more replies
Answer Match 36.54%

Can someone help me as I want to know if it's possible to save my email address in one of the F keys at the top of my keyboard, saving me from writing ity out every time as my email address is really long.

Any ideas???????????????????/
 

A:How to programme F1 F2 etc keys

6 more replies
Answer Match 36.54%

I have downloaded a new security programme but cannot find where I go to install it, I am using windows10

More replies
Answer Match 36.54%

don't know if this folder named Programme Data was there when installed my windows,its located in my local disc,i opened some folders and where empty but some contains data,

whats this folder?is it useful,should it be there? i tried to delete it all but its telling me that some are in use and cant be deleted,what should i do ?

A:Programme data

  
Quote: Originally Posted by shankly769


don't know if this folder named Programme Data was there when installed my windows,its located in my local disc,i opened some folders and where empty but some contains data,

whats this folder?is it useful,should it be there? i tried to delete it all but its telling me that some are in use and cant be deleted,what should i do ?


it is always created installing windows. you really do not want to delete anything in it.

7 more replies
Answer Match 36.54%

Hi, I have "Oganizer and Filling Carinet" and for some reason I cannot get it opened, does not matter how many clicks I do...was going through a lot of different steps and came accross one that states "missing rtl70.bpl" and to try and reinstall it again.

Can anyone help me wtih this situation I got myself into..my programme has all my important information stored in it and need to open it desperately..cannot afford to loose anything at all.


Thank you ver much
John

A:Cannot Open a programme.

Hi, I have "Oganizer and Filling Carinet" and for some reason I cannot get it opened, does not matter how many clicks I do...was going through a lot of different steps and came accross one that states "missing rtl70.bpl" and to try and reinstall it again.

Can anyone help me wtih this situation I got myself into..my programme has all my important information stored in it and need to open it desperately..cannot afford to loose anything at all.
Thank you ver much
John

2 more replies
Answer Match 36.54%

I need help for the problem, please.

Some programmes viz.Page Maker-7, Photoshop,
animation software viz. Xara 3D are not getting installed in
in Windows XP. When the setup file is clicked, after a few
seconds of the hour-glass indication, nothing happens - no hanging or
any other indications. But the softwares can easily be installed
in Windows Vista in the same computer. I need the softwares
installed in Windows XP.

 

A:New programme installation

Hi,
Are you talking about PageMaker7 $499, Xara $44.99 and Photoshop $699?

Are you downloading from the publishers of these progs? Have they offered you help on installing to XP?

Richard
 

2 more replies
Answer Match 36.54%

there's a programme that you can use in IE which works with google search pages so that when you hover over a web result it shows a preview of the page without actually going to the site, does anyone know what it's called ?
 

A:Solved: Anyone know the name of this programme..?

7 more replies
Answer Match 36.54%

The older I get, the more forgetful I become. Can anyone advise on a programme that sends me a Pop-Up reminder when I have to do something?

I used to have a programme that I can't recall the name of that would send me reminders and then keep reminding me every 15 minutes or so until I'd done whatever it was I was supposed to do. The pop up looked something like a yellow post it note. If there was anything to do that day, it came on as soon as I booted the PC up.

It was a programme that I could set well before the event, change the font etc.
 

A:Pop Up reminder programme.

I've been using an old utility called ToDo for a long time (I've been forgetting stuff for years ) which is no longer available. However a quick search found this free download which appears similar. It will at least get you started.

Raybro
 

3 more replies
Answer Match 36.54%

Hi,
Can anyone give me some ideas how to get rid of a programme that my daughter downloaded on one of these time limited demos and now it keeps popping up requesting we carry on to download the full programme ( and pay for it of course).
The programme is listed on the start up list but when I try to delet/remove programme a window warning pops up to tell me I am about to be redirected to a web site do I want to continue y/n.If I press y nothing happens if I press n nothing happens I cannot remove this programme!
It is labelled as popcorn licence manager from computer specialists Inc version1.1 and comes up as notifier 605970 when you ctrl /alt/delete it to get it off the screen.
I have tried Adaware, spy bot ,stinger and others to get rid of it but nothing seems to work.
Hope someone comes up with an idea as it is driving me mad!!!

Regards
John
 

A:pesky programme

Hi, Welcome to TSG!!
Click here to download HJTsetup.exe
Save HJTsetup.exe to your desktop.

Double click on the HJTsetup.exe icon on your desktop.
By default it will install to C:\Program Files\Hijack This.
Continue to click Next in the setup dialogue boxes until you get to the Select Addition Tasks dialogue.
Put a check by Create a desktop icon then click Next again.
Continue to follow the rest of the prompts from there.
At the final dialogue box click Finish and it will launch Hijack This.
Click on the Do a system scan and save a log file button. It will scan and then ask you to save the log.
Click Save to save the log file and then the log will open in notepad.
Click on "Edit > Select All" then click on "Edit > Copy" to copy the entire contents of the log.
Come back here to this thread and Paste the log in your next reply.
DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required.
 

1 more replies
Answer Match 36.54%

Hi, everyone, I'm back for more advice! I run the geneology programme Family Historian on my XP desktop and have just loaded it to my windows 7 laptop. How can I sync the two, so that data entered on my desktop computer also shows in the laptop family tree?
I often visit my daughter and would like to work on the family tree on my laptop but I don't want to have to double enter the data each time I update my family tree.

Cheers OllyAnna

A:Sync a programme

For your application using the sync toy might be best although there are other ways to sync your files with Windows 7.

http://www.windows7news.com/2009/12/...using-synctoy/

2 more replies
Answer Match 36.54%

Hi, I am trying to open epson photo starter i have downloaded it and deleted it and downloades it again but when i click on the icon to open it nothng happens then when i click on it again it says it is already open can anybody help, i really need this programme, thanku
 

A:can't open programme

9 more replies
Answer Match 36.54%

I ran a test on PC pitstop and my cached speed is very low.At 62.26..It suggested that i remove sme of the running programms if possible..Here is the list of progs i had running.Could i remove any of these?
Button Server Unknown C:\PROGRA~1\COMPAQ\EASYAC~1\BTTNSERV.EXE
Easy Access Software Demon Unknown C:\PROGRA~1\COMPAQ\EASYAC~1\CPQEADM.EXE
Compaq Easy Access USB Keyboard Driver Unknown C:\PROGRA~1\COMPAQ\EASYAC~1\EAUSBKBD.EXE
Unknown C:\PROGRA~1\ICQ\ICQ.EXE
IAMAPP.EXE Unknown C:\PROGRA~1\NORTON~2\IAMAPP.EXE
IAMSERV.EXE Unknown C:\PROGRA~1\NORTON~2\NISSERV.EXE
Norton Internet Security Stats Unknown C:\PROGRA~1\NORTON~2\NISUM.EXE
Transparent Proxy Server Unknown C:\PROGRA~1\NORTON~2\SYMPRO~1.EXE
Microsoft QMgr Unknown C:\WINDOWS\LOADQM.EXE
HID Audio Service Unknown C:\WINDOWS\SYSTEM\HIDSERV.EXE
LexBce Service Unknown C:\WINDOWS\SYSTEM\LEXBCES.EXE
PrinTray Unknown C:\WINDOWS\SYSTEM\PRINTRAY.EXE
Microsoft (R) PC State Manager Unknown C:\WINDOWS\SYSTEM\RESTORE\STMGR.EXE
Unknown C:\WINDOWS\TWAIN_32\PUSH650C.EXE
Messenger MSN Messenger C:\PROGRA~1\MESSEN~1\MSMSGS.EXE
Still Image Devices Monitor Windows C:\WINDOWS\SYSTEM\STIMON.EXE
Norton AntiVirus Agent Norton AntiVirus C:\PROGRA~1\NORTON~1\NAVAPW32.EXE
Task Monitor Windows C:\WINDOWS\TASKMON.EXE
Run a DLL as an App (Various) C:\WINDOWS\RUNDLL32.EXE
Task Scheduler Engine Windows C:\WINDOWS\SYSTEM\MSTASK.EXE
Spooler Sub System Process Windows C:\WINDOWS\SYSTEM\SPOOL32.EXE
Internet Explorer Windows C:\PROGRA~1\... Read more

A:programme removal

Start>Run, type msconfig and enter. Go to the startup tab and all of the things you can control are listed there in a slightly different format than what you got from Pit Stop. That format conforms to the list on this page which will allow you to decide whether you want to keep a check beside an item so it starts on boot: http://www.pacs-portal.co.uk/startup_content.htm Go to the “Full List” link or download the zip.

Many things start when called on and don’t have to be in the startup. As a general rule you want to keep Scan Registry, System Tray, your AV and firewall checked. Many scanners won’t run without StillImageMonitor checked. I don’t find that Task Monitor takes resources or CPU cycles and it makes the defrag more efficient. You can uncheck both of the Load Power Profile selections if you don’t use the auto shutdown features or have a notebook – most people leave them checked.

Run through the explanations for each of the entries and remove everything you don’t absolutely need on startup. Office Startup will recheck itself if you don’t also remove it from the start programs menu.
 

1 more replies
Answer Match 36.54%

I have downloaded Picasa2, (the WindowsXP programme is not operating properly) and while its very easy to use it doesn't support adding to the CD.
Is there a free CD burner programme that allows you to add xtra data.Nothing complicated though.
Appreciate your help. thx.

A:Cd Burner Programme

There are a few in the Free Programs link in my sig. Deepburner appears to be very good

There are a few in the Free Programs link in my sig. Deepburner appears to be very good

4 more replies
Answer Match 36.54%

I have a programme called the national lottery syndicate manager which I installed from a disc. the programme contains features such as the payslip screen- the multiple board screen - the results screen & the syndicate screen.
the trouble is whenever I try to print anything from these screens nothing happens, except the name of my printer appears in the task bar for about 4 seconds and then goes off again. the programme also contains a help menu and when I go into this menu and click on print the printer works fine. can anyone solve this one for me
many thanks silverfox

 

A:cannot print from a programme

I have no knowledge of this program but it sounds to me like the program is just sending a blank page to the printer and the printers or your OS's printer software sees theres nothing to print so it sends no message to the printer. I don't know what the problem could be with the software I recommend you go their site. There is another option though you could do a screen capture and print that from paint, I reccomend you get Screen Theif 98 wih you can get here http://www.zdnet.com/downloads/stories/info/0,10615,40713,00.html
 

1 more replies
Answer Match 36.54%

could anyone please tell me where I can obtain information about open programmes such as: Atitask,Aticwd32,MSgloop, Rnaap I dont know what the abbreviations mean
 

A:programme names

Just put them into a search engine.

Atitask,Aticwd32--these are for your ATI video card

MSgloop--this is for your Crystal Audio sound card

Rnaap--this is dial up networking

Some common ones here:
http://isyte.gethits.net/thetech/tsr.htm

[This message has been edited by Kento (edited 02-10-2001).]
 

2 more replies
Answer Match 36.54%

I am trying to load a programme using a CD but nothing comes up on my desktop

A:loading programme via CD

In 'My Computer' double-click the CD drive icon while the disk is in the CD drive.

1 more replies
Answer Match 36.54%

I am having difficulty in removing the following game. My son has lost the cd disk and is no longer able to play.It Attempts to load other activision games appear to be hindered.

EMPIRE DAWN OF THE MODERN WORLD.
Attempts to remove result in the following message :-

Cannot open INSTALL.log file.

I Have tried contacting Activision support and got no response
Is it possible?

Any help appreciated

WHR

A:Removing A Programme

try removing it on safe mode

3 more replies
Answer Match 36.54%

from computer - local disk C - Program files - Program files (x86) - different programmes in each, is there a good reason for this? - why aren't all program files in Program files? - probably a simple answer but some us are a little bit, thanks in anticipation

A:programme files

Hi, Welcome to Seven forums.

If you have Win 7 you will see these 2 folders. As Win 7 comes as 32 and 64 bit. Folder with (x86) is for those programs which are 32 bit compatible. And the other folder will contain all those programs which are available in 64 bit.
This is normal.

Hope this helps.

9 more replies
Answer Match 36.54%

I have downloaded a new security programme but cannot find where I go to install it, I am using windows10

More replies
Answer Match 36.54%

I have been trying out EssentialPIM programme which seems quite a useful tool to replace MS Outlook. The free program downloads and functions OK on my Win XP machine, but the 'Pro' version downloads and appears to install OK - except that it wont work! Clicking on the .exe file (or its icon in Start Menu or desktop) starts the hour-glass but it subsequently 'dies' after a few seconds. In addition, in the Task Manager 'Performance' Tab my processor immediately shoots up to 100% usage! (and slows down or practically freezes anything else that is running). The same program on my Notebook computer which runs Vista works OK. I seem to have read about this problem somewhere before, but of course I cant remember any details or remedies. The program support team seem a bit baffled as well so far, so I feel a bit disappointed at the moment as I would really like to give it a good try out on WinXP. I wonder if any of you folks have come across this?
JohnB
 

More replies
Answer Match 36.54%

Hi Forum,
I am a "newbie" to 7 from Vista and was just looking over the programmes I have installed with a view to doing a clean-up. I was wondering if I am suffering with "bloatware" as my Laptop (HP) came with a lot of stuff on it most of which I never use and some of it consuming quite a bit of disc space. In question are :-

(1) Cyberlink material (DVD suite/Label Print/Power2Go)... consuming nearly 500mb and always looking for a payment to activate the wretched stuff. Can I uninstall this ?
(2) Quick Play Sling Player ........................................... 145mb.

What I do use are the following:
(1) HP Media Smart to play DVD (&BluRay)...... really excellent. But is it dependent on Cyberlink ?
(2) Windows Media Player...... duly loaded with codecs to play everything .
(3) Media Player Classic ....... a neat little alternative player.

What would your advice be regarding the matters raised. I do not wish to carry over any rubbish to Windows 7. Also, apart from what I mentioned that I use there is a lot of other HP "stuff" that I am not sure about. Help really appreciated.

A:Programme confusion.

Hi Peter
Glad that you joined us. You will not be seeing as much of me as in Vista, since there are a lot more members, here, who can help. I just happened to see this and wanted to say hi.
As far at the bloat ware, you can use decrapifier to get rid of that stuff.
Crappy PC No More! | The PC Decrapifier
If it were me, I would wait a while, and just go to msconfig and remove all the bloatware from start up. It would then just take up space. Once that you know that it is not longer wanted, you can use decrapifier.
This how to see what you want to remove from startup. Just untick the ones that you do not want and then see how it goes. Do not put back half at a time, etc. That is to test for problems.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

4 more replies
Answer Match 36.54%

Dear all,

While surfing on the internet, very often i get a window saying THIS PROGRAMME IS NOT RESPONDING and freezes.

Any help?

A:this programme is not responding

If you're on dial-up this is a common occurrence. If not, sometimes sites are just busy. Tell us what version of IE you're using and if possible your download speed. If you close the browser and reopen it, does the same site load quickly? Also give an example of a site you're having the problem with.

3 more replies
Answer Match 36.54%

i have many .avi files and i was wondering if anyone could suggest a programme to me which would burn .avi files to a DVD as a film so i can watch it on the tele

many thanks

A:Can You Suggest Me A Programme?

See if one of these articles will help:Basic Guide How to Convert AVI Files to DVD with Avi2DVDBasic AVI to DVD conversion using TMPGEnc+ (including Audio Sync Correction)If one of those 2 aren't acceptable, here's a list of 54 guides, with most using freeware.Take your pick. AVI to DVD

1 more replies
Answer Match 36.54%

hi ,
i keep getting a prog flashing up in my task bar for about 2 seconds ........it has no name and dosent appear in my start up or task manager etc how can i i get rid of it please
windows XP home
150 GB
512 MB
 

A:ghost programme

10 more replies
Answer Match 36.54%

Hi,
this is the first time I have set up a pc with multiple users. I have a password protected Admin account which I want to use when I load any programmes, but not all programmes are loading onto the other limited accounts...What am I doing wrong? Any help appreciated.
Thx
 

More replies
Answer Match 36.54%

hi everyone
trying to install one of my programmes and i am getting this error, can you please help
regards calmat

More replies
Answer Match 36.54%

Does anyone know of a good programme for storing the inventory of items in a building, like a school for example. It would need to have areas for computers, all types of electrical goods and furniture etc. Where serial numbers are required field for electrical goods. It must also be able to create individual area reports for different rooms etc. Hope im not confusing anyone??

Interested to here suggestions
Thanks

A:Inventory Programme

A friend of mine used the last product on this page to inventory his tools for his maintance company. Scan them out, scan then in. I never used the software but it appears you can assign the upc with a description. He claims it will allow you to input general information, including SSN of the item.Hope this helps.

6 more replies
Answer Match 36.54%

I want/need to do a clean reinstall of Windows 7 (tried 10 and it just isn't me). I currently have a very useful and valuable application installed for which I no longer have the installer package. It is legal and I do have the key. But I will not be able to reinstall this programme once I've done the clean OS reinstall. The software house no longer supports this programme and I have not been able to find another copy of it anywhere on the internet.

I have found this registry key which presumably relates to the programme in question:
HKEY_USERS\S-1-5-21-3881858240-96957817-3944641873-1001\Software\Collins
But it only has a load of user settings inside.

I was hoping that if I saved this registry entry and the entire folder structure and file contents for this programme that I could just neatly put everything back in place after the reinstall of OS. But this is probably just wishful thinking.

Could someone suggest what measures I should take to get my programme safely over to the new install of OS.

Thanks

More replies
Answer Match 36.54%

Hi

every time I try to click a link on a web page I get an annoying box pop up saying programme not responding end now and then internet closes... anyone got any ideas why this is happening and what I can do aboiut it??

Cheers
 

More replies
Answer Match 36.54%

A  friend suggested I use BleepingComputer ADL CLEAN but have been unable to find this to download. Any suggestions please.

A:Finding a programme

Could you be mistaken about the name?Was it suggested to you because you need to get rid of adware, browser hijacker, PUP?If so this may be what you are looking for http://www.bleepingcomputer.com/download/search/?keyword=AdwCleaner

1 more replies
Answer Match 36.54%

Hi, Just recently a pop up appears as i log on. it's name is PC SPEED MAXIMISER,
ANY IDEA what this is? any help would be appreciated.
Thanks Megroy.

A:alien programme

What was the last program you downloaded? It may have come bundled with it. Go into Control Panel and uninstall it from Programs and Features.

2 more replies
Answer Match 36.54%

hi everyone

when I open up my home page which is google I am getting this message, can anyone help.

regards calmat

A:corrupt programme

Hi Calmart,

I am not sure what version of internet explorer you have but this is a good tread i have used before to fix this issue:

how to REALLY get rid of "a program has corrupted your default - Microsoft Community

Try starting from where the thread begins for example; where the explanation of resetting the settings start and then the troubleshooting that follows if that does not fix the issue.

One way of troubleshooting is to do a clean boot and then start brining in the 3rd party applications until you find the culprit:

How to perform a clean boot in Windows

Cheers,

Harry

6 more replies
Answer Match 36.54%

Virusblast has been embedded in my computer; a flashing warning icon is visible in my toolbar, c/w warnings about virus/spyware detection. I cannot find any indication that Virusblast is, in fact, installed on my computer. Any help would be greatly appreciated! I have run a scan using Hijack this; here are the results: Logfile of HijackThis v1.99.1Scan saved at 8:44:48 AM, on 05-09-2006Platform: Windows 2000 SP4 (WinNT 5.00.2195)MSIE: Internet Explorer v5.00 SP4 (5.00.2920.0000)Running processes:C:\WINNT\System32\smss.exeC:\WINNT\system32\winlogon.exeC:\WINNT\system32\services.exeC:\WINNT\system32\lsass.exeC:\WINNT\system32\svchost.exeC:\WINNT\system32\ZoneLabs\vsmon.exeC:\WINNT\system32\spoolsv.exeC:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exeC:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exeC:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exeC:\WINNT\system32\svchost.exeC:\WINNT\system32\regsvc.exeC:\WINNT\system32\MSTask.exeC:\WINNT\System32\WBEM\WinMgmt.exeC:\WI... Read more

A:Embedded Programme.

Hi and welcome to Bleeping Computer! My name is Sam and I will be helping you. Download KillBox and unzip it to your desktop.Open Killbox and select the Delete on reboot option.Copy and paste the following file to the field labeled "Full path of file to delete"C:\WINNT\system32\duxzj.dllPress the Delete button (the button that looks like a red circle with a white X in it).A first dialog box will ask if you want to delete the file on reboot, press the YES button.A second dialog box will ask you if you want to REBOOT now. Press the YES button.Your computer will reboot.================Please download Ewido Anti-spyware and save that file to your desktop.This is a 30 day trial of the programOnce you have downloaded ewido anti-spyware, locate the icon on the desktop and double-click it to launch the set up program.Once the setup is complete you will need run Ewido and update the definition files.On the main screen select the icon "Update" then select the "Update now" link.Next select the "Start Update" button, the update will start and a progress bar will show the updates being installed.Once the update has completed select the "Scanner" icon at the top of the screen, then select the "Settings" tab.Once in the Settings screen click on "Recommended actions" and then select "Quarantine".Under "Reports"Select "Automatically generate report after every scan"Un-Select... Read more

1 more replies
Answer Match 36.54%

i was repeatedly getting kicked out(nonresponsive programme error) of Microsoft IE so i switched to Mozilla FF, however i can't access some sites from Mozilla(security reasons(?)) so need to go back to M/soft. Is there a way i can access these sites from Mozilla or can you help me fix my M/soft IE?

A:non responsive programme

Like which sites cant you get into that you would in microsoft? There should be no difference if u import ur settings from internet explorer to mozilla. I would check ur Internet Options.............. start...settings...control panel...internet options...in there is security and all the stuff u need to adjust.

2 more replies
Answer Match 36.54%

Windows 7 64 bit
8 gb Ram
32 bit programme - using only 2gb of RAM, how to make it use all of 4GB??

Using maximum 2gb of ram and then it starts lagging

Though i understand that 32 bit can use max 4gb
Still 4gb is left for use with 64 bit windows, right?
 

A:allocating more ram to programme

16 more replies
Answer Match 36.54%

I have a new laptop which has Vista Home Premium installed. I currently have Spybot installed ok with ZoneAlarm free as the firewall.
What I would like to know, is, as a second programme to install, is Adaware 2007 best (and is it vista compatible) or Superantispyware (is this vista compaitble?). I have downloaded both programmes onto disc, but dont know which one is best to install.

Thanks

A:Which Adware Programme Is Best

There are lot of good free antispyware programs on the net. I use AVG AntiSpyware Free, and I am very satisfied for now. Both programs are great. Here suggestion, if you can't decide whick program you going to chose then select something else also very good, like AVG AntiSpyware.

5 more replies
Answer Match 36.54%

I have a number of flv files and I have a software that's called Moyea flv player. My problem is that when I double click on the file the box 'open with' comes up, I select the program to use, click the "always use this program" box the software will run correctly but will not remember the setting and when I click on a flv file again the "open with" box comes up again.
How do I stop this from happening?

Thanks
 

A:Unable to set programme to use

you need to set your flv player to be the default player and I don't use it so cant help you but the web site can;
http://www.flvsoft.com/flv_player/
 

1 more replies
Answer Match 36.54%

Hi my ADD / REMOVE programme is not working. The Programme comes up and seems to be searching endlessly. Even when I quit the prog it seems to go on searching (disc reading and red light on all the time)
 

A:ADD REMOVE Programme

10 more replies
Answer Match 36.54%

Compiling the Example Programs
In a real-world scenario in which a service like the compute engine is deployed, a developer would likely create a JAR (Java ARchive) file that contains the Compute and Task interfaces for server classes to implement and client program to use. Next, a developer, perhaps the same developer of the interface JAR file, would write an implementation of the Compute interface and deploy that service on a machine available to clients. Developers of client programs can use the Compute and the Task interfaces, contained in the JAR file, and independently develop a task and client program that uses a Compute service.
In this section you learn how to set up the JAR file, server classes, and client classes. You will see that the client's Pi class will be downloaded to the server at runtime. Also, the ComputeEngine's remote stub will be downloaded from the server to the client at runtime.

Build a JAR File of Interface Classes
First, you need to compile the interface source files in the compute package and then build a JAR file that contains their class files. Let's suppose a user, waldo, has written these particular interfaces and has placed the source files in c:\home\waldo\src\compute (on UNIX:/home/waldo/src/compute). Given these paths, you can use the following commands to compile the interfaces and create the JAR file.


--------------------------------------------------------------------------------

Microsoft Windows:
cd... Read more

A:Compiling of example programme

So what do you expect us to do with this piece of fluff?
 

1 more replies
Answer Match 36.54%

Hi i was using my home pc,Hewlett Packard on Windows Xp2 Home Edition, and i was using a15gb dongle on the 3 network for my internet connection as my girlfriend has a laptop and she uses the dongle aswell.I had used it in my home pc for weeks and all was ok until 1 day it would not connect, i got in touch with 3 and after trying to help me they said i would be best to uninstall the programme and then reinstall but it wouldnt let me and comes up with the following error box with this information ...................
[-5005:0x8000fff] then says ;make sure you have finished any previous setup and closed any applications on the details button it gives this information. Error = 7 setupdll\setupdll.cpp[1356] PAPP 3Connect PVendor;3(http//www.tre.com/) PGuid A899DA1F-D626-401C-8651-F2921E3B4CB3 $10.50.0.125 any help on this problem would be most welcome thank you
 

More replies
Answer Match 36.54%

I have just done some work on my sony handy cam and it went into the supplied software 'picture motion browser'. I want to tranfer it to movie maker but when I click on import pictures it stars then stops then I get a message saying

C:\Documents and Settings\Owner\My Documents\My Pictures\11-03-2010\20100309131222.mpg could not be imported. An interface has too many methods to fire events from

What does this mean please, and how can I correct it? I want to edit my video to make it look good and not like a road accident. No jargon please as I am only a bigginer. Many thanks.

More replies
Answer Match 36.54%

In Vista I could set Outlook to start as soon as I turned the machine on. In Windows 7 I can't find the access to do this.

A:how do you run a programme at startup

The methodology has not changed. For a user, drag a shortcut icon to the Startup folder.You can open the Startup folder from the Start Menu by selecting All Programs | Startup and right click to Open or Explore,or you can drill down to the Startup folder from this pathname:%UserProfile%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\StartupLawrence Garvin, M.S., MCITP:EA, MCDBA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2009)

3 more replies
Answer Match 36.12%

Hi there,

I have some movies I have on my hardrive and I wish to burn them on to disc via my DVD burner. Does anyone know of any free DVD Burning programmes?

Many Thanks
 

A:Free DVD Burning programme?

The one that came with your DVD burner.

CD-DVD Burners

http://lists.thedatalist.com/pages/CD-DVD_Burners.htm
 

3 more replies
Answer Match 36.12%

im getting a registy error does anyone on here know a web site when i can download programme to fix it thanks
 

A:any one know where i can get reg edit programme to fix mine

welshie said:

im getting a registy error does anyone on here know a web site when i can download programme to fix it thanksClick to expand...

The best way to fix a registry problem (with the exception of winsock,) is a full system restore. A lot of programs out there boast that they can clean and/or repair your registry, but truth be told, it's something that can only be done by hand, and it usually takes more time than it's worth.
 

3 more replies
Answer Match 36.12%

Have just looked at reg cleaner which I haven't done for a while and found this "thing" which has me completly bamboozled (now theres a word for you!).

Under Author it says - Woi
Under Software it says - O/i

Looked under google and cannot make ANY sense of any hits that it came up with.

Can anyone enlighten me as to what it is, what it could be associated with and/or should I get rid of it? Don't want to dump it if it is needed for any programmes I run. I do alot with Paintshop and photoshop and have downloaded quite a number of filters etc for these. Makes me wonder if there is some association with that.

Thanks to anyone who can help. Take care and be good.
 

A:Strange Programme(?) on system

If you'd mention the file name, the directory where you found it, and perhaps the O/S you run, we might be of more help.
 

2 more replies
Answer Match 36.12%

hopefully someone can help
ive had my laptop (wireless) for 6 months and dont do an awful lot on it
today i checked the space taken up on the drive and was horrified to see it only has 10gb out of 120 left
on futher investigation on the c drive i found that under programe data there was a folder called aoldiag w hich is using 40gb does anybody know what it is there are further files in it like aolservice host and win1.5.6.1
ive tried sending it to the recycle bin but it just freezes the laptop
i use aol on both laptop and pc
any ideas?????
 

A:laptop full up with odd programme

7 more replies
Answer Match 36.12%

When i start my computer-windows xp home ed. sp2- everything appears to be working ok, but after sometime all images and graphics disappear from "help & support" though other photos/graphics appear fine.further i have a notion that this has got something to do with
internet explorer and/or firefox. pl. advise. thanx
 

A:Solved: help & support Programme

Reinstalling Help and Support Center in Windows XP
http://windowsxp.mvps.org/rebuildhelp.htm
 

1 more replies
Answer Match 36.12%

I am experiencing a number of strange problems that I didnt have a week or so ago. I have a couple of old photo editing programmes that I have used for the last 18 months with no problems. I keep receiving the following message:
...........has encountered a problem and needs to close and the error signature is as follows
AppName: pd3.exe AppVer: 1.1.128.0 ModName:unknown ModVer: 0.0.00
.0 Offset:00000004
I also have a edition of Adobe PhotoShop which opens but as soon as i try to use the scanner or through photoshop it freezes and I have to use Windows Task Manager to end the task. The same happens as some as i try to import using Picasa2!
I have tried system restore, but each time i try to restore to a time before the problems started, I am unable to do so. Which is now making me concerned as to whether I have deleted a vital file from my system. I am quite good at sorting problems normally, but I am not sure where to start with this one. Any ideas would be GREAT
XP operating system
 

More replies
Answer Match 36.12%

even though i have an external 500GB drive , my main drive on the pc is almost full.
There are a few programmes i want to uninstall because they total a couple of GB and would give me much needed space.
When i use the windows uninstallers through control panel , it brings up something completely different abd somehow , the uninstall strings have become confused.

How do i uninstall the programs if its bringing up an uninstall.exe for something completely different ?
Also , my main drive is 80GB but partitioned so that 40 is for windows , and 40 is for backup.
Would it be possible to save the backup on my separate 500GB drive and free up the 40GB in the main partition ?
 

A:uninstalling the wrong programme

7 more replies
Answer Match 36.12%

My apologies if this is the wrong place for this, but I've just bought a new PC which has Win 7 installed so just finding my way about!

My old PC was running XP and all my programme shortcuts in the Quick Launch Toolbar had relevant icons on them. However, although some shortcuts I've put on my 7 QLT have appeared with the relevant icons, for instance FF and TB, 3 other programmes have just come up as blank cream coloured folders. So is there a way to get the proper icons instead of the blanks?

Thanks in anticipation.

David.

A:Programme Folder Icons

You need to pin the program's .exe icon to the task bar. It sounds like you're pinning the program's folder. The .exe icon is the actual icon that launches the program.

http://www.sevenforums.com/tutorials...ram-links.html

or

Taskbar - Pin or Unpin a Folder

1 more replies
Answer Match 36.12%

Greetings

I downloaded a programme recently - Maximum Traffic Thumbnail Generator - and I suspect it may have screwed up web pages. However I decided to uninstal the programme using Control Panel/Uninstal Programme. The message panel came up "The system administrator has set policies to prevent this installation" and then "You do not have sufficient access to uninstal this programme"

Now as I am the administrator for this computer I find this rather confusing. Any ideas how I can get round this problem ?

Regards Mouseman
 

A:Solved: Uninstalling Programme

6 more replies
Answer Match 36.12%

The programme's called "Keylock" and what it does......as I found out too late........is to stop anyone else using your comp. unless they have the floppy disk that keylock makes. (And password I set? I'm not sure.)

The setup files had to be installed to C:\unlockf and the files in there are setup.exe and unlock.exe.
I also made a folder called 'unlock' and the files there are key.prn and unlock.exe.

There are no uninstall options that I can find. Please help me get the programme off my system. Thank you.
P.s. Windows 98SE.
 

A:Solved: Can't un-install this programme.

9 more replies
Answer Match 36.12%

If someone pulls out of the insider programme what happens next, do you stay on the last Preview or do you go back to the latest stable build you installed or the latest stable build thats out at the moment and can you lose anything in the process.

I've been doing this for years and have never pulled out of these beta and insider programmes.

I'm basing this on the fact that the machines were setup and activated before entering the Insider programme.

Also if you used a hdd with a preview build from the start, but the computer is activated with a genuine build, what would happen to the hdd with the preview alone on it.

More replies
Answer Match 36.12%

HiOver the last couple of days I have been helped through the Hijackthis review from this site, and got my computer clean.Having minor problems with printer, for some reason I can't see the ink monitor, to see which colours need replacing. Have been to Epson(C64) website, and followed what they have said, by re install the Monitor 3 from the CDROM. ButI get this message:16 bit windows subsystem.c:\windows\system32\autoexe.nt. The system file is not suitable for running MS DOS and Microsoft windows applications. choose close to terminate program. CLOSE IGNOREAm I missing some vital programme?What should I do?Thanks for looking

A:Have I lost a vital programme

Go to the map windows on your hard disk probable c: (but that depends) and open the sub map repair and copy the file autoexec.nt too the map system 32 .
Normally your problem should be gone.

20 more replies
Answer Match 36.12%

Hello,
My problem is Outlook 2000 will not retain my password in the 'Internet Mail set up' box.
Other than that Outlook seem to function quite well - its just a nuisance to keep re setting my password.
Kindest Regards
Jim Gubbins

A:Outlook Mail Programme

Hi and welcome to TSF please see this Password is not saved when connecting to an e-mail server - Outlook - Office.com

1 more replies
Answer Match 36.12%

I just upgraded from 98 to XP. The system restore programme is missing on my Windows XP. I've checked the regular place in system tools but the programme is simply not there. I am running SP2, AVG anti virus, spybot, hijack this and ad aware. How can I get system restore running again?

A:XP Restore Programme missing

have you checked the registory. start, search files and folders, local drive C type in systems restore, and if it comes up, right click and do a short cut to desktop.

If that does not work, then find out what kind of disk you have, upgrade or full.

Hope this helps you.

9 more replies
Answer Match 36.12%

Hi I was wondering, is it possible to move programmes installed onto my C:Drive to a different location?

I mean I would like to set up a folder on my C:Drive where I could place only anti-spyware programmes, ie: I would like to group them all together.

However as they are already installed, can I move them or is it already too late?

Cheers, Nick

A:Moving Programme File

I would think moving them at this point would cause them not to work. You could always uninstall them, and then reinstall them in the manner you wish.

Or, and I don't know if this is what you are after, but you could create a folder on your desktop, name it Anti Spyware, create shortcuts for all of your related programs and then move the shortcuts into the folder. At least that way you could access and start them from one location. That could be done without reinstalling or moving the actual program.

3 more replies
Answer Match 36.12%

Operating system: XP home edition ( of course )

I was thinking of downloading a programme to scan my registary and locate any errors

Is this a good idea? If so what recommened safe ones can I use?

I would also prefer it free

Any responses to help a rather lost 15 year old?
 

A:Should I get a programme to scan my registary?

8 more replies
Answer Match 36.12%

email linking windows mail & outlook.comhow do i do it?just signed up to outlook.com and want to get messages from them shown on my windows mail

A:linking up email to another programme

It can be done. Do you have Vista Windows mail that came with the computer or the newer live mail client? in any event you need to add the settings for the outlook mail servers by adding a new mail account in the mail program. Then you need the settings for the service you are trying to access. If you can say which mail for sure you are using would help.To err is human but to really screw things up, you need a computer!

2 more replies
Answer Match 36.12%

HI.
I have a problem with my computer that appeared yesterday. It was working fine when l shut it down but now no programmes will load. The problem seems to be that if l try double clicking programme icons, the programmes do not start, then when l shut the computer down l get 2 non-responsive programme messages. Once l have ended the non responsive programmes any thing l have tried to load before shutting down starts working, but by then its too late as the computers already started shutting down if you see what l mean. The non responsive programmes are:

ccSvcHst

and

rundll32.exe

ive tried shutting these programmes down by doing a cntrl alt dlt but it tells me l dont have access to one of them.

ive also tried a repair installation but this hasnt helped.

any advice would be greatly appreciated.

many thanks

will
 

A:non responsive programme problem

8 more replies
Answer Match 36.12%

I keep getting "updater application has encounted a problem etc " when windows starts. What is this and how can I get rid of it??
Also IE has had difficulty starting sometimes and says it needs to send an error report. How can I fix this?
Also - when windows starts now, it says user account and my name - I dont want to see this window as I am the only person using it and it stops loading the program till you respond. How can I get rid of it.
Thanks
Are the two problems related?
 

A:updater application programme

Youcan post a hijack log from the link below and paste that log here for a look at.
hijack
 

1 more replies
Answer Match 36.12%

I'm working on a series of animated cartoons and I'd like to have certain characters 'speak' in a recognisable voice.
E.g. I'd like to have a cartoon of e.g. George Bush and have him speak and sound like the man himself. My powers of mimicry are non-existant. Is it possible to use a programme to analyse a sample of Bush's voice and then to record my own voice and have the programme alter my voice to sound like Bush's?
 

A:programme to mimic someone's voice?

This might not be what you are looking for but it may help you...

AV Voice Changer Software Diamond Edition 6.0.10
http://www.download.com/AV-Voice-Ch...d-Edition/3000-2168_4-10246097.html?tag=lst-1

AV Voice Changer Software Diamond, the latest edition of its series, is not only a voice-changing software, but also an all-in-one recording studio. With Timbre and Pitch shifting, you can modify your voices and easily talk in a male, female, teen, or even a baby voice. This voice changing software helps you modify your identity in any voice chat zone, PC-to-phone, or online role-playing game. In addition, as a recording studio, with the help of an easy-to-use Voice Recorder, Voice Changer Software Diamond is perfect for voice-over, voice dubbing, voice messaging, etc. This recording studio allows you to capture and change any audio stream to make new songs & audio clips. More advanced than the earlier editions, this voice-modifying program improves your voice output with Noise Reduction and Sound Limiter features. More features are also integrated in this program, including MP3 Player, Voice Comparator, Parody Maker, Voice Analyzer and most importantly, our unique natural nickvoices.
 

1 more replies
Answer Match 36.12%

Does anybody know whether those of us on the windows 7 upgrade programme are to receive a windows 7 disc from which we can do a clean install or is it to be an upgrade from vista only.

I'd prefer to do a complete install.

Thanks in advance

Huw
 

More replies
Answer Match 36.12%

I have encountered an odd problem in Win XP Pro SP2. When I open 'Control Panel'- 'Add or Remove Programmes', there is a massive gap in the programme list. I have attached a pdf showing the screen at the start & end of this gap, if you look at the scroll bar it will give you some idea of the size of it. It takes about 30 'page down' keystrokes to get from the start to end of the gap.

All of my programmes appear to be listed ok & this is not actually causing me any difficulties but I am curious to find out what is causing it, any ideas?
 

A:Add or remve programme glitch

nigh: If I had that kind of little problem, the first thing I'd do is run "System File Checker", and hope that fixes it. Here's how to do it: Start>programs>accessories>command prompt.......type in "sfc /scannow" (without the quotes), and press enter. (Make sure there's a space after the sfc.) You may be prompted to put your disc in the tray. If you get the Windows display asking you to choose what you want to do, just close it out, and you'll see a little progress bar that takes about 20 minutes or so to complete.

pjblevin
 

1 more replies
Answer Match 36.12%

Have just downloaded it in order to "Encode" some movie clips prior to burning onto disc with Nero, as Neros encoder does not allow for invert / flip picture. I have this upside down movie problem with XviD codec

I hoped I could drag a movie file into ffdshow and encode or am I on the wrong track

Regards - Oldie
 

A:FFDSHOW ? Anyone Familiar with this Programme ?

Not familiar with that particular program. I use a freeware program called VirtualDub to enhance my movies. It does have some encoders and will use most plug-ins (DIVX for instance). You may have to do two passes.
 

2 more replies