Tech Problem Aggregator

Windows Event ID 16002 AFD

Q: Windows Event ID 16002 AFD

I have a HP Pavillion PC which is connected to my wireless network due to restrictions in the house. I have been having some issues which i suspect are related. Nearly every day now i either lose wireless connection, even though other devices near by have no issues or my outlook stops sending/recieving. I just get the progress bar and nothing happens. The only way i can solve these issues is by a restart which is starting to get tedious now.

I have looked through my error logs and i seem to have this event that pops up






Closing a TCP socket with local port number 50513 in process 1008 is taking longer than expected. The local port number may not be available until the close operation is completed. This happens typically due to misbehaving network drivers. Ensure latest updates are installed for Windows and any third-party networking software including NIC drivers, firewalls, or other security products.



I have updated my wireless card drivers to the very latest i can obtain. I have even tried plugging in a usb Wireless Belkin adapter and still no joy.

I really want to avoid a full windows reinstall but i cannot carry on like this. Is anyone able to shed any light on this issue.

Thank you in advance and apologies if its in the wrong forum

Thanks

A: Windows Event ID 16002 AFD

Have you tried a Refresh of Windows? Refresh Windows 8

For starters, let's have a look at this report:
Please do the following:
- open Event Viewer (run eventvwr.msc from the "Run" dialog))
- expand the Custom Views category (left click on the > next to the words "Custom Views")
- right click on Administrative Events
- select "Save all Events in Custom View as..."
- save the file as Admin.evtx
- zip up the file (right click on it, select "Send to", select "Compressed (zipped) folder")
- upload it with your next post (if it's too big, then upload it to a free file-hosting service and post a link here).

3 more replies
Answer Match 54.6%

I will try to describe my problem as best as I can, few times during the day, I lose access to the internet on my machine - I cant open any web page, but if I have a video running on when this problem occrus, for example live stream, it keeps going without problems. Sometime the internet access restores alone, sometime I need to turn off / on my lan adapter or restart PC.
windows 8.1 64bit, fully updated, using mcafee antivirus
I get an error in the event log, Source: AFD - Event ID 16002
error says ( i will try to translate it literally what it says ): Closing UDP socket with local port number 58344 ( these numbers vary ) in proces 1076 ( this number is always the same ) took longer than expected. Local port number may be unavailable till the closing operation is finished. Usually this happens because of faulty behavior of LAN drivers. Make sure, you have all Windows updates, all network software of other manufacturers, LAN drivers, firewalls or other safety software products installed.
I have all windows updates installed, mcafee fully updated, i reinstalled drivers from my motherboard manufacturer webpage. I hope someone can help me, this problem really sucks

A:Internet access problems - closing UDP sockets, id 16002

Give these drivers a try: Download Gigabyte GA-Z77X-UD3H (rev. 1.2) Atheros LAN Driver 2.1.0.7 for Windows XP, Windows Vista, Windows XP 64 bit, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit - Softpedia

7 more replies
Answer Match 49.98%

I received a windows network error and went into events log and it has a warning on it. How do I resolve? do I need to assign a task to it or somehow delete. There are several events with warning from source Microsoft windows kernel processor power. Please
help.

More replies
Answer Match 47.46%

Hi,
keep getting the errors above every startup regarding;
11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.
Context: Application, SystemIndex Catalog
Details:
(HRESULT : 0x80004005) (0x80004005)"
I have 3 admin user profiles.
Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch event viewer or mouse customisation softwares, they freeze temporarily and ... Read more

A:Windows 7: Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

7 more replies
Answer Match 47.46%

received three error codes in a row with the following error message:Windows Operating System; Version: 6.1.7600.16385; Event ID: 11; Event Source: Disk, what do i do i need help please.........
HP,WINDOWS 7 HOME PREMIUM
 

A:Windows Operating System; Version: 6.1.7600.16385; Event ID: 11; Event Source: Disk

11 more replies
Answer Match 47.46%

The exact details are Log Name:      Application
Source:        SideBySide
Date:          9/23/2015 1:28:53 PM
Event ID:      80
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Angela-PC
Description:
Activation context generation failed for "C:\Program Files (x86)\Slingplayer Desktop\Slingplayer Desktop.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component
version already active. Conflicting components are:. Component 1: C:\windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18837_none_fa3b1e3d17594757.manifest. Component 2: C:\windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18837_none_41e855142bd5705d.manifest.

if someone can help with this error in my event log i would be so grateful.

More replies
Answer Match 47.46%

no info comes up with diagnosis/analysis for this URGENT item in Event Log...was directed to you for further assistance.      Add'l/same problem w/Event ID 100. Please advise ASAP?  Tnx, Karen

 

More replies
Answer Match 47.46%

Good Evening,

My PC is steadily failing with a variety of blue screen errors -

----------------------------------------------------------------------------------------------------

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 07/10/2010
Time: 00:06:29
User: N/A
Computer: PHIL-E2A3E8C94F
Description:
Error code 1000000a, parameter1 806f8360, parameter2 000000ff, parameter3 00000008, parameter4 806f8360.

Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 30 1000000
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 38 30 eters 80
0030: 36 66 38 33 36 30 2c 20 6f8360,
0038: 30 30 30 30 30 30 66 66 000000ff
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 38 2c 20 38 30 36 66 08, 806f
0050: 38 33 36 30 8360

----------------------------------------------------------------------------------------------------

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 06/10/2010
Time: 22:23:54
User: N/A
Computer: PHIL-E2A3E8C94F
Description:
Error code 10000050, parameter1 e4733000, parameter2 00000000, parameter3 80582627, parameter4 00000001.


Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 35 10... Read more

A:System Error - Event Category (102) - Event ID 1003 Windows OS

are these errors occurring out of the blue or do they happen when you run certain things? did you recently install new drivers or updates? posting the full specs of your machine and which operating system would also be helpful.
 

5 more replies
Answer Match 47.46%

So basically my pc restarts whenever it wants its getting really annoying, it comes up with serious error and it either says its device drivers or ram, but ive tested my ram with the windows diag and mem test with no errors, and ive updated all my drivers, so im not sure, any help would be muchly appreciated,

this is from the event viewer, ill have to post a copy of my next serious error report and anything else that would be helpful, thanks and plz plz plz help


Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 4/21/2007
Time: 2:34:13 AM
User: N/A
Computer: EZMIKE
Description:
Error code 1000008e, parameter1 c0000005, parameter2 805607c5, parameter3 f3283a84, parameter4 00000000.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 38 1000008
0020: 65 20 20 50 61 72 61 6d e Param
0028: 65 74 65 72 73 20 63 30 eters c0
0030: 30 30 30 30 30 35 2c 20 000005,
0038: 38 30 35 36 30 37 63 35 805607c5
0040: 2c 20 66 33 32 38 33 61 , f3283a
0048: 38 34 2c 20 30 30 30 30 84, 0000
0050: 30 30 30 30 0000
 

A:System Error - Event Category (102) - Event ID 1003 Windows OS

got these last 4 minidumps too
 

3 more replies
Answer Match 45.78%

Alright, started getting the 1001 BugCheck crash with Event 41 Kernel-Power BSOD a few times not long ago, widely spaced out incidents (it will lock up, make a very weird repetitive noise through my stereo speakers and will also get black and white bars across the screen before the blue screen turns up and asks for restart option choice). And Event 4 k57nd60a has been ongoing for as long as I can remember.

Any ideas?
Event 1001, BugCheck
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff8800646843a, 0xfffff880028c5a10, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 041312-18205-01.

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-04-13T14:05:58.000000000Z" />
<EventRecordID>39029</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>M... Read more

A:Event 1001 BugCheck Event 41 Kernel-Power Event 4 k57nd60a

Memory exception but we need to examine the DMP files to find out why.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb ... Read more

9 more replies
Answer Match 44.52%

Event Log Explorer
A tool to help Manage, Analyze and Report Windows Event Logs
For Windows NT/2000/XP/2003 operating systems​
This is a simple, "starter" guide to help use this tool. (Note this tool will only work on Windows NT/2000/XP/2003. It will not work with Windows Vista.) Download and run Event Log Explorer.

One time initialization

Click Tree->Show Tree
Click File->New Workspace
Click File->Save Workspace As (and save your workspace file anywhere you choose)
Example: To Filter / View / Export Recent Error and Warning Log Events

Open an Event Log
>> (e.g Typically, you only need look at the System Log (for System event records) and the Application Log (for Application related events)
Filter the events you want to see (for this example we filter to only see Non-Information events that occured in the last 7 days)
>> Click View->Filter.
>> Uncheck Information. Towards the bottom of the filter window, look for ?Display event for the last? enter 7 days. Click OK
Click File->Export Log to save a copy of the events for later viewing or sending to others
>> Check: Text file, All events, Event Description
>> Uncheck Export Event Data
>> Check Close dialog when done
Click Export and save as a txt file on your Desktop
Help Troubleshooting an Event

Double click an event to see the "Event Description" (which provides more detail about the event)
Click Event ID Database button for an web page a... Read more

A:"Event Log Explorer" tool helps manage/analyze/report on your Windows Event Logs

I use the subscription to EventID.net. It has been greatly helpful. I don't have this analyser but am a big believer in using the Event Viewer. I'll add a description I have written up which will help in determining the Events: This may be useful in addition to the Event Analyzer.

One thing I have not been able to do is keep the filters set with the software in the OS.

Find the Error(s)in the Event Viewer that correspond to the crash/freeze/error message/blue screen, etc.:

Description of the Event Viewer:




Unfortunately, many Windows XP users aren't aware of the Event Viewer, what it is, where it is, how it can help with a problem:
The Event Viewer has logs for everything that happens on the computer. There are three sets of logs: System, Applications and Security. By opening the first two to display the Events, you can look for Errors that correspond to the time of the problem- in your case, the crash.

There are three types of Events in the System and Apps logs:
1. Information (white circle w/blue i): this is just basic documentation of the normal working of the System or Apps.
2. Warnings (yellow triangle w/black exclamation mark) noting some problem at that moment. Warnings usually resolve on their own. If they do not, they become>>>
3. Errors (red circle w/white X- they document something that didn't work or isn't happening as it should. Each Errors has three parts: an ID#, a Source and a Description. By doing a right clic... Read more

1 more replies
Answer Match 43.26%

Thanks for any help.

Event Type: Warning
Event Source: WinMgmt
Event Category: None
Event ID: 5603
Date: 28/11/2006
Time: 17:57:33
User: USER-2F62D3344E\user
Computer: USER-2F62D3344E
Description:
A provider, OffProv11, has been registered in the WMI namespace, Root\MSAPPS11, but did not specify the HostingModel property. This provider will be run using the LocalSystem account. This account is privileged and the provider may cause a security violation if it does not correctly impersonate user requests. Ensure that provider has been reviewed for security behavior and update the HostingModel property of the provider registration to an account with the least privileges possible for the required functionality.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

A:What's this event in event viewer? (event source WinMgmt)

http://support.microsoft.com/default...b;en-us;891642
this might help

1 more replies
Answer Match 39.48%

Hi all,

i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

"event log service is unavailable. verify that the service is running."

so i try to start the event log service, from the services.msc program;
whenever i try to start windows event log from services i get the message:

"Windows could not start the windows event log service on local computer.
Error 3: The system cannot find the path specified."

how can i specify the path?
or
how can i resolve the problem?

any help would be appreciated please---thanks

A:HELP need to solve this problem asap - Unable to start event viewer/event log service

Fire up regedit and find this key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog

With "Eventlog" highlighted on the left pane, you should be able to see a value called "ImagePath" on the right. ImagePath should be equal to this:

%SystemRoot%\System32\svchost.exe -k LocalServiceNetworkRestricted

If you can't see "ImagePath" in that location, or if it's not set to the text above, that's almost certainly your problem. If you're in the habit of using "registry cleaners", that might be the cause.

3 more replies
Answer Match 39.48%

Description:
Error code 100000d1, parameter1 00000060, parameter2 00000002, parameter3 00000000, parameter4 ba60578c.

For more information, see Help and Support Center at
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 64 100000d
0020: 31 20 20 50 61 72 61 6d 1 Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 36 30 2c 20 000060,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 30 2c 20 62 61 36 30 00, ba60
0050: 35 37 38 63 578c

Some body can help me ?
 

A:Random restarts Source:System Error Event Category: (102) Event is 1003

Inside the 1 MiniDump:




BugCheck 100000D1, {60, 2, 0, ba60578c}
Probably caused by : nvata.sys ( nvata+1378c )Click to expand...

Uninstall the nvidia drivers from the control panel
Download and install the latest drivers
 

2 more replies
Answer Match 39.48%

I was running 3DMark06 and got a BSOD code 124. After that every time I boot Event Viewer logs Error Codes ID 3012 and 3011. Attached are screenshots of both.

I googled this and found two different threads where someone suggested to rebuild the performance counters. Both responses were basically the same, below is one. Neither of the OP's came back and said if this worked for them.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Re: LoadPerf 3011, 3012
Hi-
I had the same problem with LoadPerf and here is what I found out:
All performance counter names and explain text are maintained in string tables managed by the performance counter subsystem (Perflib).

The current contents of the performance counter string tables are corrupted and cannot be displayed. To correct the problem, rebuild the string tables.

User Action
To rebuild the string tables, on the computer that displayed the message, at the command prompt, type Lodctr /r
The contents of the string tables are automatically rebuilt.

I hope this helps
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Since this was from 2008 (XP?) and the other response was for Vista I wanted to see if the guru's at SevenForums thought that this was okay before I did this.

Here are the screenshoots of my two errors.

A:After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot

Rebuilding the string tables as outlined in my first post fixed the problem.

1 more replies
Answer Match 39.48%

Hi, all. I have been trying to figure out a serious of issues that my PC has been having. It's possible they were caused by poorly seated RAM, but the RAM seems to check out now. There is a whole slew of details on the case here: TechNet with a lot more information that will be of help, including posted evtx files. I have always gotten great help here, though, and am in dire need of a second opinion, so I thought I would check with this forum's experts.Here is the basic gist, although there is a ton more detail on the other link:Since building this machine, I've had frequent BSODs, often seemingly-related to middle of the night MSE updates, or possibly other windows updates. These always required a System Restore to recover from, as Windows was unbootable. Often it said the Restore failed, but it seemed to resolved the bootability issue at least.I have removed MSE and reseated some RAM that initially tested poorly, but which now seems to be passing MemTest no problem.I still have a series of issues that occur, and the one that was causing noticeable issues was SuperFetch causing sysmain.dll to fault (Event 1000, posted below) on every boot and periodically throughout the day. I have disabled SuperFetch, which stopped the issue from happening every boot, but it still happens occasionally, so it seems SuperFetch is but one trigger.The other most common error I have is Event 55 (posted below), possibly related to Windows Backup and/or System Restore, which seems ... Read more

More replies
Answer Match 39.48%

duct: .NET Framework; Version: 2.0.50727.8670; Event ID: 0;
Event Source: TOASTER.EXE;


 

More replies
Answer Match 39.06%

i have been having this error for a couple days now and it also seems to be associated with another crash im getting from a game i play also.

first one is a memory dump blue screen issue and the other is just the game crashing.


Script:



Log Name:      Application
Source
:        Microsoft-Windows-WMI
Date
:          1/17/2015 10:53:52 AM
Event ID
:      10
Task Category
None
Level
... Read more

A:Event ID 10 — Event Filter Query Functionality CAUSING BLUE SCREEN

Still nothing responded on this.

1 more replies
Answer Match 39.06%

Hi people,
I have setup a disk quota usage for the user "tester" 
50mb = warning level
100mb = Quota limit
When I generated a file of > 50mb then I see well a event
Level,Date and Time,Source,Event ID,Task Category
Information,23-09-16 15:10:24,Ntfs,36,(2),A user hit their quota threshold on volume C:.
when I try put a second file of more than 50mb also, first i'm block to copy it (good) and then i receive well then related event
Level,Date and Time,Source,Event ID,Task Category
Information,23-09-16 15:10:38,Ntfs,37,(2),A user hit their quota limit on volume C:.
so I erase the files and try again, and then nothing in the event log !
I have try : restart the quota management, to pout other limit for that user, to disable then enable again limitation for this user without success ! once the event 36 & 37 appear it seem that he never appear again even if a warning, limit is triggered
again...

any idea... ?

More replies
Answer Match 39.06%

Hi,

I was hoping somebody could offer an insight on the below, as searching around I've not found much to go on other than "overheating"

Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):



I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:



So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:



Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?

The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors, if anyone has any advice that'd be great.

... Read more

A:WHEA-Logger event 18/19 errors in Event Viewer (W7 Home Premium)

First, well done on applying the thermal paste to the cpu/gpu. I assume you cleaned the vents as well. Did you use arctic silver 5 (just curious)?

I wonder if the processor could have been damaged from the heat. Are you experiencing any BSODs or other problems? You can run Prime95 to test your system. And Furmark for gpu.

2 more replies
Answer Match 39.06%

Hi,

keep getting the errors above every startup regarding;

11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

Context: Application, SystemIndex Catalog

Details:
(HRESULT : 0x80004005) (0x80004005)"

I have 3 admin user profiles.

Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch ... Read more

A:Event errors (11, 7000, 7026), intellipoint and event viewer freeze.

Hiya and welcome to SevenForums!
Please contact an admin to move this thread, because this isn't the appropriate section for these kinds of problems.

4 more replies
Answer Match 39.06%

Hi,

keep getting the errors above every startup regarding;

11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications."
7000 - "The Crypkey License service failed to start due to the following error:
The system cannot find the file specified."
7026 - "The following boot-start or system-start driver(s) failed to load:
NetworkX"
1530 - "Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1925592742-456944920-4000667399-1009_Classes:
Process 720 (\Device\HarddiskVolume5\Program Files\Microsoft Security Client\MsMpEng.exe) has opened key \REGISTRY\USER\S-1-5-21-1925592742-456944920-4000667399-1009_CLASSES"
3036 - "The content source <csc://{S-1-5-21-1925592742-456944920-4000667399-1005}/> cannot be accessed.

Context: Application, SystemIndex Catalog

Details:
(HRESULT : 0x80004005) (0x80004005)"

I have 3 admin user profiles.

Each time I login, the loading happens and then I notice my side mouse button of Microsoft Comfort Optical 3000 doesnt operate as customised in Intellipoint 7.00. It takes a long time before it does respond.
If I try to launch ... Read more

More replies
Answer Match 39.06%

Hi all,

i tried loading the eventvwr.msc file from system32 folder directly as well as from the administrator tools, but i get:

"event log service is unavailable. verify that the service is running."

so i try to start the event log service, from the services.msc program;
whenever i try to start windows event log from services i get the message:

"Windows could not start the windows event log service on local computer.
Error 3: The system cannot find the path specified."

how can i specify the path?
or
how can i resolve the problem?

any help would be appreciated please---thanks

A:Unable to start event viewer/event log service on vista

By the way the OS is a Vista Home Prem without SP1. and i have searched this problem extensively, finding no solutions.

If anyone has any advice it would be greatly appreciated.

19 more replies
Answer Match 39.06%

After too many unexplained problems, I decided to reinstall Windows 8.1 Pro x64, and migrate off of SBS 2011 Standard. In addition to the primary workstation that can't read any event logs, I built five Server 2012 R2 servers (Hyper-V host, Active Directory
VM, Exchange 2013 VM, SQL Server 2014 VM, and WSUS VM).

I was diagnosing why my workstation's Outlook cannot reach the local Exchange Server.   I tried to look at the event logs, and found the
Event Viewer cannot open the event log or custom view.  Verify that Event Log service is running (it is) or the query is too long (whatever that indicates).  The request is not supported (50)
Looking at the directory of the event logs folder.  It appears that most logs are empty, which is understandable since it's a rebuilt installation.  I found a small number of Applications and Services Logs and it appears nothing was logged since
six days ago on 4/4/2016.   On support forums, I found many have this exact problem on Win 7, Win 8, and Win 10.  Of the solutions posted none of them would even execute on my Win 8.1 Pro x64 machine.  I tried clearing the event logs (WEVTUTIL
CL logfilename) and am told Failed to clear log .... The request is not supported. 
It's very difficult to diagnose why Outlook 2013 cannot reach Exchange 2013, even if Outlook is installed on the Exchange server machine (just as a test).  The web-based Outlook owa, ecp, ... all work fine. ... Read more

More replies
Answer Match 39.06%

Well, I tryed to manage page-file but unfortunataly it resulted in problems. Then I lost VAIO-CARE and 7 ZIP files too. When I open Event Viewer every single day I see this: event Id 2002, Souce: Eap Host, Log name: Application and number of Eventes: 84. As I am desparate about that, What sould I do? Reinstall VAIO-care or WHAT else? Please help me!!!!! Well, I can say that before of all, I tryed to install vopt, latest version but it was not freeware and I soon had to uninstall it but it was not getting to uninstall from programs and features and then I used register editor to delete the leftovers which desapered from program and features....but I can see several error in event viewr such as Event 11706, MsInstaller >>>> Product Vaio Media Plus -- Error 1706 - An instalation for the product Vaio Media Plus cannot be found. Try the installation again using a valid copy of the instalation package 'VMP VEPMMx64.msi'. So should I reinstall all vaio care or not................!!! By the way I tryed to install vopt in order to align files in hard drive but when I tryed to manage page file it did not work as should have so I lost vaio care..........................................What to do? can you figure out what going on.................!!!

A:Event Viewer Event Id 2002, Source: EapHost, Log Application

Welcome to the forums Marioo!

Have you tried a system restore to a point before these errors started? (Easiest things first) You could also try a sfc/scannow, to find and possibly repair any corrupted system files. We have many fine tutorials here at the forums, written by some very knowledgeable people, heres a link to one if you haven't did this before :

SFC /SCANNOW Command - System File Checker

5 more replies
Answer Match 39.06%

Hi all,

I've just built an AcerPower F6 desktop to Win 7 Pro 32 every shutdown it shows BSOD and promptly restarts.

Event log is showing me the following for a critical event at the same time the shutdown occurs (The date on the log is from a week ago but this happens every shutdown which is once every weekday):

Log Name: System
Source: Microsoft-Windows-Kernel-Processor-Power
Date: 14/03/2014 13:19:19
Event ID: 6
Task Category: (6)
Level: Error
Keywords:
User: SYSTEM
Computer: CUR-ICT-01.LODGEFARM.LOCAL
Description:
Some processor performance power management features have been disabled due to a known firmware problem. Check with the computer manufacturer for updated firmware.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Processor-Power" Guid="{0F67E49F-FE51-4E9F-B490-6F2948CC6027}" />
<EventID>6</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>6</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-14T13:19:19.519629700Z" />
<EventRecordID>5118</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="52" />
<Channel>System</Channel>
<Computer>CUR-ICT-01.LODGEFARM.LOCAL</Computer>
<Security UserID="S-1-5-18" /&g... Read more

A:BSOD on Shutdown Event Log = Kernel-Processor-Power. Event ID: 6

Your NI Measurement Studio driver appears to be causing problems.


Code:
Probably caused by : NIPALK.sys
It's outdated by 11 years, if you wish to keep the program I suggest you update the driver.


Code:
88a32000 88aab000 NIPALK T (no symbols)
Loaded symbol image file: NIPALK.sys
Image path: \SystemRoot\System32\Drivers\NIPALK.sys
Image name: NIPALK.sys
Timestamp: Mon May 12 22:21:05 2003 (3EC01041)
CheckSum: 0007ACFC
ImageSize: 00079000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please remove it or update it from the following link.

NI Measurement Studio - National Instruments

EDIT, there is a fix you can download which prevents file corruption, if you can't find an updated driver then download this.

http://digital.ni.com/public.nsf/web...C?OpenDocument

3 more replies
Answer Match 39.06%

It's been a while since I've experienced a BSOD as I'm viewing a video on youtube. It would freeze as if the audio was caught in mid-stream then BSOD, then would restart automatically. I go to Event Viewer after windows as loaded and I see Event 41 Kernel-Power in there.

I had this issue before and we found out that the motherboard was causing the issue. I have also replaced my video card and added additional memory and expanded to 16gb. Before, I only have 8gb.

Ran sfc/scannow with no errors found. Going to do chkdsk as well.

It's strange because this does not happen at all when I'm playing online games or even just standard browsing. It's when I play videos on youtube that there would be instances where this would happen. There are other times where I can view them without any issue at all.

Any ideas would be great.

Also, how can I attach the windows DMP file to scale it down as it is just really large?

Thanks again guys.

A:BSOD when watching videos on youtube, Event 41 in Event Viewer

Hello Santos, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

9 more replies
Answer Match 39.06%

System event not recording anything. It is empty, says "date is invalid(13)".

I have some flaky things going on like unexplained CPU spikes causing slowdowns and mouse drag. Also have video problems screen going blank then recovery.

I have reloaded video drivers to no avail. No system lockups or BSODs. I need to see system event log to debug. Other event logs OK. I am proficient on PC and have searched for event log problem. The Event Log service is running. Thanks.

hp pavilion dv9000
OS Name Microsoft® Windows Vista™ Home Premium
Version 6.0.6001 Service Pack 1 Build 6001
Processor Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1801 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Hewlett-Packard F.23, 10/3/2007
SMBIOS Version 2.4
Installed Physical Memory (RAM) 2.00 GB
Adapter Type GeForce 8400M GS, NVIDIA compatible
Adapter Description NVIDIA GeForce 8400M GS
Adapter RAM 128.00 MB (134,217,728 bytes)
 

A:Solved: Vista, Event Viewer - system event log not recording

Did you check the - %SystemRoot%\System32\Winevt\Logs\System.evtx file? It may be corrupted and you may want to rename it to .old and let it recreate itself.
 

2 more replies
Answer Match 39.06%

Out of the blue I get 3 event errors when I boot up my Home Premium 64 bit. First time in two years.

Event ID 7006:
The ScRegSetValueExW call failed for FailureActions with the following error:
Access is denied.

I don't have AVG. I have Agnitum Firewall, Panda Antivirus (Free).

Event ID 7009:

A timeout was reached (30000 milliseconds) while waiting for the IPsec Policy Agent service to connect.

Event ID 7000:

The IPsec Policy Agent service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.

When I checked the windows services table, I noticed that IPsec has in fact been started but probably not in a timely fashion. How do I get rid of these 3 annoying errors although I don't notice any performance problems in my laptop?

Thanks in advance for your help.

A:Three event errors on bootup: Event ID 7006, 7000 and 7009

Hi Atom.

"Event ID 7006:
The ScRegSetValueExW call failed for FailureActions with the following error:
Access is denied."

These events are normal because of Panda Cloud Antivirus' self-protection feature.

"Event ID 7009:

A timeout was reached (30000 milliseconds) while waiting for the IPsec Policy Agent service to connect."

Follow the instructions from here:

Event ID 7009 — Basic Service Operations

You can put new value as 60000 instead of 30000.

The Event ID 7000 should disappear when you boot your laptop next time.

Hope this helps.

1 more replies
Answer Match 39.06%

EDIT: ARGH, sorry, meant to post this in General Discussion forum, I have no idea if it is a network issue.

Hello everyone,

I keep seeing this error appear several times a day, even during idle, in my Event Viewer. I did a clean install of build 10586 less than a month ago. I'm not having any overt issues yet, but the error is disturbing.

SettingSyncHost (9144) {979B90BD-0F81-4D83-B038-62032DD17C47}: Database C:\Users\xxxxx\AppData\Local\Microsoft\Windows\SettingSync\metastore\meta.edb: Index deleteDetection of table items is corrupted (0).
I have spent a few hours researching this and I can't find any reports of similar issues or even what the file metastore\meta.edb is for. Is this hopefully one I can just rename and it'll automatically create a new one?

More replies
Answer Match 38.64%

Every time I boot my laptop I get error message Event ID 11 in Event Viewer. The details are:

Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications.

This is listed under AppInit_DLLs in the registry and the dll being loaded is nvinitx.dll, from what I can find out this has to do with the optimus function on my laptop and having it loaded is okay. I just want to get rid of the error message being logged everytime I boot.

A:Event Viewer Error Message Event ID11 - How do I get rid of this to?

Does anyone have any ideas on how to get rid of this error message in Event Viewer?

2 more replies
Answer Match 38.64%

From what I understand about the event log in Windows 7, when someone tries and is unsuccessful when logging into the computer the event log should record an event id 4625. However this is not happening at either of my Windows 7 Ultimate machines. I found an identical thread about this problem where the user found a solution but did not specify what is was.

http://forums.techguy.org/general-security/995501-solved-event-id-4625-not.html

Any ideas?

Thanks
 

A:Solved: Event ID 4625 not being logged in event viewer

Are you creating a Custom View ? Be sure that you have selected 'By Log - Event Logs: Windows Log, Security. Then except for the Event ID field, everything should not be checked.
 

3 more replies
Answer Match 38.64%

My Win 7 Pro x64 system just started acting up. When I select an event in the Event Viewer, the More Information: Event Log Online Help link doesn't open IE10. When I click on the link, the Event Viewer pop-up confirmation box open to confirm sending information across the internet, but when I click "Yes" the box goes away and I get a momentary indication from the cursor that the action is processing then nothing. It will not change the active IE10 page or open IE10.

Is there a solution with out a system restore?

Thanks in advance for your assistance.

Regards

A:Event Viewer Event Log Online Help Links don't function

I don't know much about this kind of stuff - but here is what I dug up using Microsoft's Process Monitor and Process Explorer.

The mmc app (event viewer) sends info to one of the svchost instances (netsvcs).

Svchost writes some info to the registry about a scheduled task and then runs that task.

This starts taskeng - which starts wscript.

Wscript runs a temporary VBS file that is supposed to send a URL to the operating system (shell).

The OS is supposed to open your default browser.

Here is the contents of the VBS file from my testing:

Code:
Set shell = createobject("wscript.shell")
Shell.run """C:\Users\username\AppData\Local\Temp\tmp78C0.url"""


You might try SFC /SCANNOW Command - System File Checker

And let's hope that some other forum member can suggest things that you should check.

4 more replies
Answer Match 38.64%

While playing war thunder on steam my screen went black and i couldn't do anything. I restart my computer and play again it crashes. After one more time i look at my event viewer and find critical error event ID:41. I don't whether its the game or my pc.

A:BSOD playing war thunder, Event viewer event 41

Critical error - Event ID 41 is (most likely) when you forced the system to restart (usually by holding the power button down).

You have a NETGEAR WG111v3 Wireless-G USB Adapter:





I do not recommend using wireless USB network devices. Especially in Win8/8.1 systems.
These wireless USB devices have many issues with Win7 and later - using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win8/8.1 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.



I noticed that you don't have Secure Boot and/or UEFI enabled. If you were having problems with it and changed it, please let us know.





It's not necessary to enable it now. But, should you reinstall Windows at some point in the future, please enable it first.

I mention this because it may happen that (one day) the system won't boot. This can be caused by a program changing your UEFI settings, or an update of the UEFI resetting it to default values.

To test and see if this is the cause, boot into the UEFI and see if the settings have been changed. If uncertain, try with Secure Boot both on and off (and the UEFI on UEFI or Legacy (CSM))

If it still doesn't boot after trying this, then move on to other troubleshooting tools as it's not likely to be due to this.



Black screen errors are not... Read more

1 more replies
Answer Match 38.64%

I am having problems powering on from sleep using Ps2 or USB devices or scheduled wake event. When I press the space bar or mouse button to wake nothing happens except I hear a short click sound (from motherboard) and the hard disc LED comes on for a split second. The second time I press there is no sound or LED flash. Same thing happens with a scheduled wake event from Windows 7. I also get this happening when I quickly press and release the power on button. When I press the power on button for longer than about 1/4 sec (guessing) then the PC comes on. This problem seems to have happened after upgrading to Windows 7 (from XP Pro). I checked the Bios and wake with PS2 devices was on. Also checked Device Manager Power Management for the mouse and keyboard and wake from sleep was on. Also checked power management options and ?allow awake timers? is checked. It appears the wake event is happening but the duration of the momentary on mechanism is not long enough to actually turn on the PC.

A:Can't wake PC from sleep PS2, USB or scheduled event - event triggers

Found the problem - it was a dying CMOS battery

1 more replies
Answer Match 38.64%

Hi,

My computer runs for all practical purposes I guess but I can certainly feel that there is good reason for all event log errors while working on my windows 7. For example, the blue screen of death appears once every 3-4 months, or earlier today the computer just started getting really slow (given my 8GB memory this raaarely happens), or "windows explorer" would randomly crash (however, when this does happen it usually happens just once during a session then it restarts and it's fine so it's not preventing me from using my computer it's just...something's wrong and it shouldn't be and I want to fix it! )...I have rows and columns of event log errors such as event ID 1000, event ID 80, 1001, 1002, and much more but since addressing all of them at once will probably invade the entire forum, I prefer to address them perhaps in little bundles so I don't annoy the experts and exploit the resources.
Also, I have a feeling that once I start fixing some of them, many others will disappear automatically. I'm sorry if my post is a bit vague but this is my first time here so please be patient with me and just tell me whatever information you need from me to narrow things down and I will do that.

I have provided a link to a few of my event logs to OneDrive which I appropriately labeled to make it easier to distinguish which one is which.

http://1drv.ms/12mlhJJ

Thank you so much in advance.

A:Event log swarm! Including event ID's 1000, 80, 11, 1001+2, etc...

Hello and welcome Allen mate just to try a few rather obvious bits and pieces and to start eliminating stuff run these the first two in safe mode if you have to then the malwares as long as the machine keeps running.

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < use the /f and /r options in Option2 if necessary

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

download from bleeping computer ? delete any rubbishthese find.

I must say it is refreshing to find that a member has included the system specs for a change - well done!

3 more replies
Answer Match 38.64%

Every time I boot my laptop I get error message Event ID 10 in Event Viewer. The details are:

Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor"AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.

I do believe that the error message is nothing to be concerned about from what I have read when I googled it, but nothing I read tells you how to get rid of it. Does anone know how I can get rid of this so it does not show up in event viewer everytime I boot?

A:Event Viewer Error Message Event ID10 - How to get rid of it?

idahosurge,
Read through the link below...
Hope it helps with your problem.

Event ID 10 is logged in the Application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2

5 more replies
Answer Match 38.64%

I tried a lot, but couldn't find the event log for the cleanmgr.exe (Disk Cleanup) in the Event Viewer.
Actually, I need the source & event id of cleanmgr.exe to schedule a task in the Task Scheduler.

A:In Event Viewer, Where is event log for cleanmgr.exe (Disk Cleanup)?

This Article would be of services to you .

3 more replies
Answer Match 38.64%

I have noticed these in my event viewer appearing a lot and roughly around times when my computer decides to freeze up on me.

Event ID 7001, Service Control Manager
The Peer Networking Grouping service depends on the Peer Name Resolution Protocol service which failed to start because of the following error:
%%-2140993535

&

Event ID 7023, Service Control Manager
The Peer Name Resolution Protocol service terminated with the following error:
%%-2140993535

A:Event ID 7001 and 7023 Shows in Event Viewer a lot.

Just FYI - I usually ignore these errors when they show up.
BUT, if they're associated with freezes we'll need to have a deeper look.

Please post this info even though you're not reporting BSOD's: http://www.sevenforums.com/crashes-d...tructions.html

7 more replies
Answer Match 38.64%

A week ago I started getting this warning errors logged three to six times or more per day in Event Viewer.

Event Viewer Warning - Source is e1yexpress - Event ID is 27
Intel(R) 82567V-2 Gigabit Network Connection Link has been disconnected.

Every time Event Viewer logs the e1yexpress warning it follows up with this logged warning
Event Viewer Warning - Source is DNS Client Events - Event ID is 1014
Name resolution for the name isatap.home timed out after none of the configured DNS servers responded.

Not every time, but a lot of times Event Viewer also logs this warning right after it logs the isatap.home warning.
Event Viewer Warning - Source is DNS Client Events - Event ID is 1014
Name resolution for the name teredo.ipv6.mocrosoft.com timed out after none of the configured DNS servers responded.

Today I installed updated drivers for my Intel(R) 82567V-2 Gigabit Network Connection, but after 11 hours of no logged error warnings they started up again and I got three sets of the above logged in a 90 minute time frame.

My system is two years old and as far as I know I have never had these errors logged before.

My motherboard is a Asus Rampage III Extreme.

Any ideas on how to get event viewer to stop logging these? A google search really did not offer any real clues on what to try other than updating my Intel(R) 82567V-2 Gigabit Network Connection drivers, which did not solve the problem.

A:Event Viewer Warning - Source e1yexpress - Event ID 27

Well after trying everything google came up with to try, including updating drivers to the latest version, rolling drivers back to the default Win7 version, disabling SIPS and a few others things I decided to call Verizon and see what they had to say. As soon as I told Verizon Tech Support that my error code was "e1yexpress - Event ID is 27
Intel(R) 82567V-2 Gigabit Network Connection Link has been disconnected", they told me not our problem take your PC to a shop. I called back a couple of hours later and talked to a different person and this time I only said that I was getting the Event 1014 time out errors. They had me do a few things in a cmd prompt and then said we do not know, but we can send you a router, I said fine, I will try the router.

Well it has been over a week since installing the new router and no error codes at all so it was the router!

2 more replies
Answer Match 38.64%

I am getting lots of critical errors in the event viewer. Event ID = 100, 200, 400, 307, 402.... (Below are the details for a couple of them). I have seen several posts on the web for this issue but no solutions. It seems to be an issue that affects a lot of vista installs on all different pc / laptops. I'm running an IBM (lenovo) T61 laptop. I don't know if these issues are related but frequently when I reboot the laptop it will hang during the boot up. When this happens I need to Hard Boot the laptop, I will then get the message that windows did not shut down correctly and asks to 1) run a repair restore or 2) boot window normal. Sometimes I need to do this several times before it will boot up. I?m afraid the day is coming where it will not boot up at all.

I would appreciate any information someone might have.

Thanks...

****Event ID = 200****
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 1/26/2009 9:02:57 AM
Event ID: 200
Task Category: Shutdown Performance Monitoring
Level: Critical
Keywords: Event Log
User: LOCAL SERVICE
Computer: xxxx
Description:
Windows has shutdown:
Shutdown Duration : 153587ms
IsDegradation : false
Incident Time (UTC) : 1/26/2009 3:17:21 PM
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windo... Read more

A:Boot up Issues - Critical Event Log errors - Event ID = 100, 200, 400, 307, 402

Originally Posted by mehowe


****Event ID = 400****
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 2/15/2009 9:51:42 AM
Event ID: 400
Task Category: System Performance Monitoring
Level: Critical
Keywords: Event Log
User: LOCAL SERVICE
Computer: xxxxx
Description:
Information about the system performance monitoring event:
Scenario : System Responsiveness
Analysis result : Analysis could not be performed in time. There is a possible serious performance issue
Incident Time (UTC) : 2/15/2009 2:49:26 PM
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Diagnostics-Performance" Guid="{cfc18ec0-96b1-4eba-961b-622caee05b0a}" />
<EventID>400</EventID>
<Version>1</Version>
<Level>1</Level>
<Task>4005</Task>
<Opcode>37</Opcode>
<Keywords>0x8000000000010000</Keywords>
<TimeCreated SystemTime="2009-02-15T14:51:42.799Z" />
<EventRecordID>1693</EventRecordID>
<Correlation ActivityID="{00000000-A6C8-0000-2155-6BAA7B8FC901}" />
<Execution ProcessID="2016" ThreadID="2216" />
<Channel>Microsoft-Windows-Diagnostics-Performance/Operational</Channel>
<Computer>xxxxx</Computer>
<Security UserID="S-1-5-19" />
&l... Read more

1 more replies
Answer Match 38.64%

If a make a password mistake when logging in, event viewer should log event with ID 4625*. But it doesn't. How do I get it too? If you want to know about my computer model Etc. Click on the computer icon next to my name.

(*Event 4625 means Bad password)

Thanks
 

A:Solved: Event ID 4625 not being logged in event viewer

I assume you are using Vista or Win 7

The following eventIDs are all related to Login Failures:
4625,4626,4627,4628,4630,4635,4649,4740,4771,4772,4777
 

2 more replies
Answer Match 38.64%

I wanted to see who was viewing my computer and went to event viewer, under System > filter current log > power troubleshooter -- I found that the wake source for the system resuming from sleep was a device usb root hub, what does this mean?

More replies
Answer Match 38.64%

Hi all,

I'm having an issue with an Events 1001 and/or 902 crash when I run GTA V it occurs at random times, and without warning. I've reset Windows 10 Pro, uninstalled and reinstalled the game but I keep getting the crashes. Windows 10 Pro should be up to date, I have my doubts about my mouse as the manufacturer hasn't released updated drivers in some time, and the rest of my peripherals/utilities should be up to date. Thanks in advance

A:Event 1001 and Event 902 at Random times while running GTA V

Hi,

Try updating your network driver (iqvw64e.sys) here: -

https://downloadcenter.intel.com/

0 more replies
Answer Match 38.64%

A fatal hardware error has occurred.

Reported by component: Processor Core
Error Source: Machine Check Exception
Error Type: Bus/Interconnect Error
Processor APIC ID: 2

The details view of this entry contains further information.

I run a Cyberpowerpc with an AMD FX(tm)-4130 Quad-Core Processor 3.80 GHz
I have WINDOWS 8.1 NOT 7, NOT 10, NOT VISTA, 8 EIGHT

More replies
Answer Match 38.64%

Slow booting.  Really slow booting.  Seems that using an SD card for ReadyBoot/ReadyBoost is causing the issue.  But why?
On investigation, this only started happening back in November, which coincides with the install of KB2685813 UMDF 1.11 (http://support.microsoft.com/kb/2685813).
Could be a bit buggy....


I'll uninstall the update and see if this solves the issue.
So, first event:

Log Name:      System
Source:        Microsoft-Windows-DriverFrameworks-UserMode
Date:          04/01/2013 10:47:30
Event ID:      10114
Task Category: Startup of the UMDF reflector
Level:         Information
Keywords:      (2)
User:          SYSTEM
Computer:      LAPTOPW7A
Description:
The UMDF reflector was unable to complete startup because the WUDFPf service was not found.  This service may be started later during boot, at which point Windows will attempt to start the device again.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-DriverFrameworks-UserMode" Guid="{2E35AAEB-857F-4BEB-A418-2E6C0E54D988}" />
    <EventID>10114</EventID>
    <Version>1</Version>
    <Level>4</Level>
   ... Read more

A:UMDF Reflector fails to start (event 10114, Driverframeworks-Usermode) resulting in WUDFRd failed to load... (event 219, Kernel-PnP)

Hmm.  Now that is interesting.
In my System event log I was getting an NTFS error (57: Failed to flush tlog).  I didn't think it was from my HDD, so using diskpart, I ran a 'CLEAN ALL' on my SD card, then recreated the FS as exFAT (previously it was NTFS).
Seems to be working now, although I'm getting VDS Basic Provider errors (Unexpected failure.  Error code:
[email protected]) "which can be safely ignored" (re: KB979391).
This begs the question: if it can be safely ignored, why is it raised in the first place?
Boot time is also restored to an acceptable timescale.

11 more replies
Answer Match 37.8%

Hi Guys/Girls

I keep getting this error every 30 minutes anybody managed to solve this ?

Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 30/10/2016 11:54:11
Event ID: 10010
Task Category: None
Level: Error
Keywords: Classic
User: DALE-PC1\Dale
Computer: Dale-PC1
Description:
The server {4AA0A5C4-1B9B-4F2E-99D7-99C6AEC83474} did not register with DCOM within the required timeout.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="0">10010</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2016-10-30T11:54:11.788175700Z" />
<EventRecordID>18568</EventRecordID>
<Correlation />
<Execution ProcessID="8" ThreadID="9028" />
<Channel>System</Channel>
<Computer>Dale-PC1</Computer>
<Security UserID="S-1-5-21-4124590474-3230443324-182549641-1022" />
</System>
<EventData>
<Data Name="param1">{4AA0A5C4-1B9B-4F2E-99D7... Read more

A:Event Viewer keeps showing Event ID 10010

Hi,

It's a synchronization error. The server trying to sync to a device that is no longer present or was just never there.

Try to disable the following service: Portable Device Enumerator Service (WIN+R > Services.msc) and see if that helps.

Cheers,

1 more replies
Answer Match 37.8%

Please advise what this error might be I've started getting several times a day:

Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 21/11/2015 14:14:07
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: SYSTEM
Computer:
Description:
Session "" failed to start with the following error: 0xC0000011
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2015-11-21T14:14:07.333968800Z" />
<EventRecordID>5752</EventRecordID>
<Correlation />
<Execution ProcessID="6760" ThreadID="5300" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>Swale</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SessionName">
</Data>
<Data Name="FileName">
</Data>
<Data ... Read more

A:What is Error Event 2 Kernel- Event Tracing?

Any ideas what this maybe due to?

3 more replies
Answer Match 37.8%

This has been popping up in my event log and preplexing me... I want to get rid of it, but don't know what exactly is generating it and wondering if anyone has any insight...

Log Name: System
Source: Microsoft-Windows-DNS-Client
Date: 1/26/2012 9:21:14 PM
Event ID: 1014
Task Category: None
Level: Warning
Keywords:
User: NETWORK SERVICE
Computer: Fireball
Description:
Name resolution for the name www.cryptodan.com timed out after none of the configured DNS servers responded.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DNS-Client" Guid="{1C95126E-7EEA-49A9-A3FE-A378B03DDB4D}" />
<EventID>1014</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2012-01-27T02:21:14.775443800Z" />
<EventRecordID>44352</EventRecordID>
<Correlation />
<Execution ProcessID="1296" ThreadID="4596" />
<Channel>System</Channel>
<Computer>Fireball</Computer>
<Security UserID="S-1-5-20" />
</System>
<EventData>
<Data Name="QueryName">www.cryptodan.com</Data>
... Read more

A:Event 1014, DNS Client Event Warning

You could always clear certain logs usually found on the windows event logs. The ones that need most attention under this logs are Critical events. I have certain events pertaining to DNS client logs/details and is not affecting any performance.

7 more replies
Answer Match 37.8%

Windows 10 Home 64 bit
ASUS X540LA Notebook

What is going on here and what is the best for dealing with this? The AppID seems to be designating RuntimeBroker, but I have done everything so far to correct this error. What am I missing?

Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 7/4/2016 7:05:24 PM
Event ID: 10016
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: DESKTOP-EOB6C9K
Description:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="0">10016</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<T... Read more

More replies
Answer Match 37.8%

Howdy Gents....And Merry Christmas!!

Have a question...

I was poking around in event viewer and came across a new entry. It's called ESENT and is being logged anywere between 4-20 times a day. I've researched this...and it seams to be tied to Windows XP SP2 and the Windows Update Client Database because it's using the wuaueng.dll and wuauclt.exe files.


I do not have service pack 2 installed....but I'm updated on ALL fixs...so I'm thinking this is a problem with the just the Update Client. After backtracking my Install history...it began appearing in my logs after I installed the "Cumlative Security Update For Internet Explorer 6 Service Pack 1 (KB86781)....MS04-025.

I'm thinking Windows Update Installed the new Client software at that time...as that update didn't have anything to do with this. My questions are...

Has anyone seen this on an XP PRo system just using SP1?
Why is it being logged? (I Have autoupdate disabled)

More replies
Answer Match 37.8%

Hello,


First time ever I am posting a thread like this, never thought I would have to.

Anyway, the issue is described below.

Randomly my computer decides to shutdown and restart unexpectedly.

There is no blue screen, it just shut downs and restarts immediately.

I can't really relate the issue to a certain task or running program, it's all so random.

It can occur while browsing the web, watching a film or playing a game.

I have been fixing around with computers for quite some time now and this is my second build.
The components are listed below:

PSU: Corsair Professional Series HX850

CPU: Intel Core i7 2700K @ 3500 MHz

MB: Gigabyte GA-P67A-UD5-B3

RAM: Corsair Dominator 4x4GB 1600 MHz DDR3

GPU: EVGA GTX580 SuperClocked 1536 MB SLi

HDD: Corsair Force Series 3 60GB

HDD: Corsair Force Series 3 120GB

OS: Windows 7 Ultimate 64 Bit Retail

I finished this system about five months ago and it started to act like this since 3 weeks back.

The system is working solid otherwise.

Due to the limited amount of space on the system drive at 60GB I have disabled System Restore.

I have AVG Internet Security 2012 installed along with Malwarebyte's Anti-Malware.

I have tried to update system drivers in order to restore the system stability, which are:
USB 3.0 Host Controllers

SATA 3 Controllers

Realtek SFX Drivers

Realtek LAN Drivers
None of the above mentioned dr... Read more

A:Event Viewer - Event ID 6008 [Troubleshooting]

Event ID 6008 entries indicate that there was an unexpected shutdown.
Critical thermal event indicates that the problem is related to one of your hardware components not functioning properly that is triggering the computer to shut down.

Check if your CPU is overheating. Also check if the heat sink or fan is functioning properly. If the laptop is under warranty, get in touch with the manufacturer.

If it isn?t, get a good cleaning done for the fan and heat sink with compressed air only if you?re comfortable. Otherwise seek the help of a technician.

In addition, since power supply plays a major role in cooling the computer?s innards check if PSU (Power Supply Unit) is functioning properly.

Other thermal events (depending on your board) can be from the graphics card, bridge chipsets or hard drives.

You may opt to check for third party Thermal Event Monitor software so that you have a brief idea as in what?s triggering the critical thermal event.

Note: Microsoft cannot guarantee that any problems resulting from the use of Third Party Software can be solved. Using Third Party Software is at your own risk.

4 more replies
Answer Match 37.8%

Hi there.

I've spent a good 10 hrs searching for a fix to my problem - including SevenForums - with no success...

I just purchased a Clevo P170HM with i7-2920XM processor and GTX 485 graphics card. It's an awesome system. I went into event log, and after noticing a few critical and error events I decided to fix the important ones...

I've done this - except for the Error - Event 1001 DHCP Client:

"
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0016EB059618. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server."

This is the most common of the 1001 events, but others have network address' of 0x001F81000100 and 0x00158315A1C0, all with the same error 0x79.

Many people have thoughts on what's causing it, so here's what I've done:

- Confirmed all my network drivers etc are all up to date
- Followed and completed the full Windows help file on the topic
- This includes pinging myself and the DNS address' to confirm responses
- Completed a release and renewal of the ipconfig command on the DHCP lease.
- Disabled ipv6 in all network adaptors
- Disabled ICS in all network display adaptors (after restart, checking services)
- Disabled/enabled Bonjour to eliminate
- Checked services of DNS auto, DHC auto etc etc
- Turned off Virgin Broadband on one restart to see if the error occured (which... Read more

A:Event Log Event 1001: DHCP Client

I've had a problem with DHCP renew not working properly for months, not sure when it started. I've tried registry settings, new drivers, etc. Nothing has worked. Often I only lose my IP address for a second or less, but of course, this is enough for any open connection to drop.

After DHCP renew fails to the point of my connection being lost, some other DHCP mechanism kicks in which (almost) always works at once.

Right now, however, the problem seems to have gone away.

What I did was uninstall the driver from my network card (Realtek RTL8168D/8111D), again and again, until it was no longer possible to uninstall the remaining driver (Windows default I'm guessing).

Then, after some time, an optional update appeared in Windows Update. It was a network driver that was released by Microsoft on May 14, 2009.

After I installed this driver, DHCP renew has never failed.

I'm sorry if this gives you false hope in solving your issue (which perhaps is different), I just had to provide the one thing that actually worked for me. I know your frustration!

1 more replies
Answer Match 37.8%

Greetings,

I have a large number of the following errors in my event viewer:
Level|Source|Event ID|Task Category
Error|spdt---|------4|--- none

General--
Driver detected an internal error in its data structures for .

Details--
__________
XML View--
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="sptd" />
<EventID Qualifiers="49156">4</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-06-25T05:25:52.106802800Z" />
<EventRecordID>83268</EventRecordID>
<Channel>System</Channel>
<Computer>adm-PC</Computer>
<Security />
</System>
- <EventData>
<Data />
<Binary>000000000100000000000000040004C0530000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
__________
Here is the Friendly View--
-System
-Provider[ Name] sptd
-EventID4[ Qualifiers] 49156
Level2Task0Keywords0x80000000000000-TimeCreated[ SystemTime] 2011-06-25T05:25:52.106802800Z
EventRecordID83268ChannelSystemComputeradm-PCSecurity
-EventData
000000000100000000000000040004C0530000000000000000000000000000000000000000000000
Binary data:

In Words
0000: 00000000 00000001 00000000 C0040004
0008: 00000053 00000000 00000000 00000000
0010: 00000000 00000000

In Bytes
0000: 00 00 00 00 01 00 0... Read more

More replies
Answer Match 37.8%

Hello fellow forum users I am not sure where to begin but I'll start out by saying that I have been googling this one for a few days now. Followed the guides I've found and have not had success fixing this event.

Problem:

Windows 10's event viewer is littered with the same DCOM event over and over again. I have traced the issue to my browser, the event is logged every time I launch the browser. The following is what the log generates.

"The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{9E175B6D-F52A-11D8-B9A5-505054503030}
and APPID
{9E175B9C-F52A-11D8-B9A5-505054503030}
to the user GIGABYTE\Britton SID (S-1-5-21-397383442-3244542279-3714240959-1001) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool."

Following the instructions on several similar guides pertaining to event 10016 all lead me to the Component Services interface. I have went into the registry and taken ownership of the above key values at the root folder. At first making Administrator the owner and then making my name the owner "Gigabyte/Britton" in a desperate attempt to make it stop. The problem I am having is that under Windows 10 the Component Services are not only greyed out but the ID String 9E175B9C-F52A-11D8-B9A5-505054503030 is no where to be found and there... Read more

A:Event 10016 - DistributedCOM event resloution. Help?

Sigh, yeah I don't think this one will ever get an answer, oh well at least I got to make my first post on Ten Forums (YaY). So long Win 7 forums!

As for my posted topic above, I'll come back and check it out later, who knows I might get lucky and someone knows what all this DCOM crap is about. Just read up on it on Wikipedia (Distributed Component Object Model - Wikipedia, the free encyclopedia). Even after reading about what the acronym stands for, along with the rest of the info on that page, I don't really get what that has to do with a local PC's operation, seems DCOM is for handling browser calls and Object Library's which is beyond my scope of knowledge.

2 more replies
Answer Match 37.8%

Hi, I have a strange thing going on with Event 1 in the Even Viewer.
Event 1 signifies that the computer awoke from sleep (standby/hibernation), see attachment below for illustrations. It shows the time (circled in blue) which is also the time it shows in the list with all the other events, and that is the actual time the event occurred. But if you look on top of the box (circled in red) you see weird times listed over there, in fact at the time that the event take place (9:08 in this case) the times listed above didn't arrive yet. Why are those future times there, and how does the computer write something form the past into the future? I find that very strange. Do you perhaps know how that could happen?

Thank you, I appreciate it!
 

A:Event Viewer - Event 1 has weird times in it

16 more replies
Answer Match 37.8%

I have a pavilion desktop h8-1075, and have found the following comes up in error of event viewer every so often

iaStor did not respond within the timeout period event 9

any assistance would be great to see if someone can cure this issue

Pavilion Desktop hpe h8-1075uk
Win 7/Pro
16 Meg ram

Tony Miller

A:Event Viewer error iaStor Event 9

Iastor is your storage driver (for HD or Raid) and often a driver will not respond within the normal range. No big deal but you can update the driver to newest version to see if that eliminates the messages

2 more replies
Answer Match 37.8%

Dell Dimension 8200 (3 years old); Intel Pentium 4, 2000 Mhz; Phoenix BIOS (never updated); WinXP SP2 (all updates); AVG Pro; Brother MFC 420cn; Dell 1702 FP LCD; Spybot; MS AntiSpyware Beta.

Trying to save time for everyone, I'll just say that I looked at Event Viewer today. I've looked at it infrequently, and never could understand what I saw, but today there was something relatively new and scary:

Type: Warning
Date: 9/2/2005
Time: 7:24:03 AM
Source: disk
Category: None
Event: 51
User: N/A
Computer: JohnandCheryl

Further info under help and support said an error was detected during a paging file operation.

The word "disk" scared me, so I checked the entire Event Viewer, and found 25 of these errors, from Aug 1 2005 through Sep 3 2005. If this event was cataloged earlier, I don't know, because the Event Viewer only goes back to Aug 1.

I checked System Restore for Aug 1, 2005 and found a couple of things; 1) an accidental MS "update" to NVIDIA GeForce4 MX driver 5.12 -- but we've had the 6.1.7.7 driver for a long time now. The 5.12 screws up the display resolution, big time. I reinstalled the 6.17; resolution is fine; but I'm wondering if this could have something to do with the Event 51 warning.

Also, on that same date, something called Software Distribution Service 2.0 is listed three times, and I don't know why. I don't even know what it is.

I've researched the web, and can't find anything that seems ... Read more

More replies
Answer Match 37.8%

I have a HP D530, XP, SP3. Here's what I've done:

1) Ran MEMTEST v4 twice, NO errors
2) updated ALL drivers, from NIC, BIOS, video, to chipset
3) reinstalled XP but did NOT format

Machine STILL crashes with BSODs. Before the reinstall I did see 'DRIVER_IRQL_NOT_LESS_OR_EQUAL and a 'PFN_LIST_CORRUPT', both which appear to point to RAM problems. I even went back to use the original RAM chips but it continues to crash. Should I attach the .dmp files/crash log as well?

Here are the 2 errors; the 2nd indicates Symantec Anti Virus is being disabled.

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 4/1/2010
Time: 1:01:29 PM
User: N/A
Computer: xxxx
Description:
Error code 1000008e, parameter1 c0000005, parameter2 bf0f344d, parameter3 b684fbd8, parameter4 00000000.
For more information, see Help and Support Center at go.microsoft.com/fwlink/events.asp
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 38 1000008
0020: 65 20 20 50 61 72 61 6d e Param
0028: 65 74 65 72 73 20 63 30 eters c0
0030: 30 30 30 30 30 35 2c 20 000005,
0038: 62 66 30 66 33 34 34 64 bf0f344d
0040: 2c 20 62 36 38 34 66 62 , b684fb
0048: 64 38 2c 20 30 30 30 30 d8, 0000
0050: 30 30 30 30 0000


--------------------
vent Type: Error
Event Source: Service Control Manager
Ev... Read more

A:XP SP3 crashing with Event Category: (102), Event ID: 1003

The minimum Passes for Memtest is 7 and the more the better. 0x8E errors are almost always caused by hardware and is a very strong indicator of corrupted memory.

0x4E: PFN_LIST_CORRUPT is possibly the single strongest indicator of corrupted memory though there may be other reasons.

* Rerun memtest over night and check it in the morning. One other thing you can check through the BIOS is to see if the motherboard has set the RAM voltage to the manufacture's specs.

*** Attach the five most recent minidumps. Don't zip each one individually. Put them in one Zip file.
 

74 more replies
Answer Match 37.8%

I keep an eye on the event viewer and a new event I haven't seen before has showed up. The event is under the application heading as information and the source is (ESENT). It reads as follows:

Event Type: Information
Event Source: ESENT
Event Category: General
Event ID: 100
Date: 8/16/2004
Time: 5:20:33 AM
User: N/A
Computer: ALPHA
Description:
wuauclt (1272) The database engine 5.01.2600.0000 started.

Everything is the same on the next three events except the discriptions which are as follows:

wuaueng.dll (1272) SUS20ClientDataStore: The database engine started a new instance (0).

wuaueng.dll (1272) SUS20ClientDataStore: The database engine stopped the instance (0).

wuauclt (1272) The database engine stopped.

This happens several times a day. Everything seams to be working properly but I very interested in what this data is trying to tell me.

Thanks
John
 

A:Strange new event showing up in event viewer.

9 more replies
Answer Match 37.8%

Hi there,

It's my first time posting on this forum however this forum has helped me solve dozens of past issues so thanks

Ok so I've got an MSI GS40 notebook running Windows Home 64-bit. It's a great notebook and runs like a dream. I recently checked my Event Viewer and saw thousands of warnings. Basically the same warning every second. They're all Execution Service - Event ID: 1

I'm really not keen on a system restore or reformat. The hardware is pretty high-end and so it doesn't seem like anything has slowed down but I would like to resolve these crazy warnings.

Any help would be great...

More replies
Answer Match 37.38%

We have one service App reads remote hosts side Windows event log periodically. It first open remote host side Windows log to get the handle.
HANDLE hEventLog = OpenEventLog(hostIP, SECURITY_EVENT_SOURCE);
Check hEventLog not NULL here.
ReadEventLog(hEventLog, ...);
ReadEventLog never returns (stops) sometimes. It blocks thread.

These API also never return:
GetNumberOfEventLogRecords(hEvent, ...)
GetOldestEventLogRecord(hEvent, ...)
Could you help what happened on there, never return? How can I check further?

More replies
Answer Match 37.38%

Failed to connect to a windows service
Windows could not connect to the System Event Notification Service service. This problem prevents standard users from logging on to the system. As as administrative user, you can review the System Event Log for details about why the service didn't respond

More replies
Answer Match 37.38%

I am logged on as administrator.  Usin Win7 Ultimate 32 bit.  can not start Event Log service.  Any suggestions?

A:Windows could not start the Windows Event Log service on Local Compurter. Error 5: Access is denied

Hi Bob,
 
This issue can be caused due to the incorrect permission settings for the administrators group.
 
I would like to suggest you perform the following steps to troubleshoot the issue.
 
1. In the "Start" menu, locate "Command Prompt". Right-click and choose "Run as Administrator". If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
 
2. Type the following commands, then press "Enter" to execute them one by one. Please note the space before the command and its parameter.
 
takeown /f C:\windows\system32\logfiles\wmi\rtbackup
cacls C:\windows\system32\logfiles\wmi\rtbackup /G administrators:F
 
3.   Restart the computer to check the issue.
 
What’s the result?Arthur Li - MSFT

25 more replies
Answer Match 36.96%

When I Turn on and Off my Desktop its really having a very very slow or very long time to Open Windows Start Up or Turning my PC OFF..
when i checked event viewer i found this..
sometimes i get BSOD

Critical system errors..
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
- <Event xmlns="Error">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />

<EventID>41</EventID>

<Version>2</Version>

<Level>1</Level>

<Task>63</Task>

<Opcode>0</Opcode>

<Keywords>0x8000000000000002</Keywords>

<TimeCreated SystemTime="2013-06-16T01:41:31.941664000Z" />

<EventRecordID>2577</EventRecordID>

<Correlation />

<Execution ProcessID="4" ThreadID="8" />

<Channel>System</Channel>

<Computer>molex-PC</Computer>

<Security UserID="S-1-5-18" />

</System>
- <EventData>
<Data Name="BugcheckCode">0</Data>

<Data Name="BugcheckParameter1">0x0</Data>

<Data Name="BugcheckParameter2">0x0</Data>

<Data Name="BugcheckParameter3&qu... Read more

A:Windows 7: BSOD Microsoft-Windows-Kernel-Power Event ID: 41

Please post this report before we begin: Windows Genuine and Activation Issue Posting Instructions

1 more replies
Answer Match 36.96%

Hi there,

i am having some issues with an upgrade on Windows NT 4.0 to Windows 2003 Stamdard with Active Directory.

The environment consisted of one Windows NT 4.0 PDC and four Windows NT 4.0 BDCs. As per the Microsoft recommended method to upgrade this environment to Windows 2003 I performed the following:

1. Build a new Windows NT 4.0 server with SP6.0a as a BDC on the production network.
2. Promoted this newly built BDC to a PDC whilst on the production network.
3. Ensured that the old PDC had been demoted to a BDC and that all servers were happy replicating with the newly built PDC.
4. I then removed the newly built PDC from the network, upgraded it to Windows 2003 Standard with Active Directory, turned on the registry setting to make this Windows 2003 a NT 4.0 emulator, and connected it back to the production network.
5. I then checked server manager on the BDCs and confirmed that they could "see" their DC again, and the DC could see the PDCs.
6. I left the server to run overnight then the next day I returned to it and ran the command "Nltest.exe /bdc_query:<domain name> to show the connection and replication status of the BDCs.

This is where I ran into problems.

Two out of the five BDCs were quite happy showing a connection status of SUCCESS and were replicating happily between themselves and the DC according to the Event Viewers on both the 2003 DC and the two BDCs.

These two servers were correctly displaying the status code 0 0x0 NERR_SUCCES... Read more

More replies
Answer Match 36.96%

help me plz for this error : Crash in the fifa 17 :

Event id : 1001

Fault bucket , type 0 Event Name: StoreAgentScanForUpdatesFailure0 Response: Not available Cab Id: 0

Problem signature: P1: WSAutoUpdate P2: 80070422 P3: 10586 P4: 589 P5: Windows.Desktop P6: P7: P8: P9: P10:

Attached files: C:\Users\SAEED-PC\AppData\Local\Temp\WERE616.tmp.WERInternalMetadata.xml

These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_WSAutoUpdate_95205dc5609fd59e5eab4b91e971fb728a3f358_00000000_cab_01e2e635

Analysis symbol: Rechecking for solution: 0 Report Id: c7fed44a-898b-11e6-8761-d54e541e477a Report Status: 4 Hashed bucket:

how to fixed ?!?!

More replies
Answer Match 36.54%

Hello
I am new to Microsoft Message Analyzer and just downloaded version 1.4 and installed on my Windows 10 laptop
I saved my Windows System Event log as an .evtx file to have some data to start looking at. I note the column entitled 'summary' appears to show the body of the event message. However I see many rows which state "unable to retrieve the event description"
in this column, what do I need to do to fix this issues please? could it of been the way that I saved the .evtx file in the first instance (I accepted the defaults) or do I need to install some additional files/components so the messages are displayed
correctly?

Thanks all
Ernest

More replies
Answer Match 36.54%

The past 3 days I have been having random freezes for no specific reason. I have run memtest86 an it found no errors. I have run the windows disk checking program as well with no errors. The only thing I recently installed into my computer hardware wise is a new graphics card the gtx 560ti. I have a minidump file if anyone wants to take a look at it. Also this freezing happens in firefox usually and I have to do a hard shutdown.

A:Event Id 1001 and Event Id 41 Freezing

  
Quote: Originally Posted by Star103


The past 3 days I have been having random freezes for no specific reason. I have run memtest86 an it found no errors. I have run the windows disk checking program as well with no errors. The only thing I recently installed into my computer hardware wise is a new graphics card the gtx 560ti. I have a minidump file if anyone wants to take a look at it. Also this freezing happens in firefox usually and I have to do a hard shutdown.



We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart ... Read more

5 more replies
Answer Match 36.54%

Hi,

For the past 3 nights between 2100 and 2200 Event Viewer has been recording a string of approximately 150 'Kernel Event Tracing'events. The system works ok, but as I sit and watch, the event viewer racks up about 1 every 5 seconds. I have attached a screen shot.

The PC is about 5 years old, but this install of Windows 7 SP1 was done about 1 month ago along with the addition of a Samsung SSD.
My searches have not found any suggested solutions other than system restore or download a 'Registry Fix' which doesn't appeal to me at all.

Any help would be appreciated.
Rob.

A:Kernel Event Tracing Event ID 2

Hi try this. Rename this file: %windir%\panther\setup.etl to setup.old and reboot.

18 more replies
Answer Match 36.54%

I get a system hang randomly. image on screen is frozen and sound loops. nothing in minidump. I would appreciate any help, thank you.

GENERAL(tab)
Session "Microsoft-Windows-Setup" stopped due to the following error: 0xC000000D

DETAILS(tab)
- System

- Provider

[ Name] Microsoft-Windows-Kernel-EventTracing
[ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}

EventID 3

Version 0

Level 2

Task 2

Opcode 14

Keywords 0x8000000000000010

- TimeCreated

[ SystemTime] 2010-08-01T06:13:46.109600000Z

EventRecordID 81

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 152

Channel Microsoft-Windows-Kernel-EventTracing/Admin

Computer Doom-PC

- Security

[ UserID] S-1-5-18


- EventData

SessionName Microsoft-Windows-Setup
FileName C:\Windows\Panther\setup.etl
ErrorCode 3221225485
LoggingMode 5

A:event 3, kernel-event tracing

  
Quote: Originally Posted by pruw


I get a system hang randomly. image on screen is frozen and sound loops. nothing in minidump. I would appreciate any help, thank you.

GENERAL(tab)
Session "Microsoft-Windows-Setup" stopped due to the following error: 0xC000000D

DETAILS(tab)
- System

- Provider

[ Name] Microsoft-Windows-Kernel-EventTracing
[ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}

EventID 3

Version 0

Level 2

Task 2

Opcode 14

Keywords 0x8000000000000010

- TimeCreated

[ SystemTime] 2010-08-01T06:13:46.109600000Z

EventRecordID 81

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 152

Channel Microsoft-Windows-Kernel-EventTracing/Admin

Computer Doom-PC

- Security

[ UserID] S-1-5-18


- EventData

SessionName Microsoft-Windows-Setup
FileName C:\Windows\Panther\setup.etl
ErrorCode 3221225485
LoggingMode 5



Is win 7 installed already?
Do you have a backup from before the problem started?
Do you have a working win 7 dvd to do a repair install?

There are several ways to find what the problem is. The best is to go into event viewer (type eventvwr in search). Go to the windows log>application tab.

You want to look for critical errors (they have red in the left column ).

When you find them you want to look for critical errors that say app hang, app crash, or anything that relates to the problem.
... Read more

1 more replies
Answer Match 36.54%

keep getting it logged as an error. I have gone into Adjust Date and Time\Internet Time\and it is set to automatically synchronize with time.windows.com and on a scheduled basis. When I try to update or change the setting I get an error message that an error occurred while windows was synchronizing. I have tried to do a system file check but get the error message that Windows Resource Protection could not perform the requested service or start the Repair Service. I have checked that Windows Modules Installer is set to manual and so I don't know how else I can repair this error 131. Can anyone help please.

A:How do I rectify Event ID 131 in Event Viewer so I don't

You can try to sync with other time instead of time.windows.com. Once succeeded, switch back to time.windows.com. In addition, make sure the 'Windows Time' service is running.

6 more replies
Answer Match 36.54%

Hello, I am having another strange event in my event viewer this time its this: A parity error was detected on \Device\Ide\iaStor0. Source: iaStor Event ID: 5 I have researched but nothing specifically addresses this issue, only similar event IDs with different error messages. Any help would be greatly appreciated.

A:iaStor event in event viewer

This error occur with this error usually :
Windows Event ID 9 from iaStor

3 more replies
Answer Match 36.54%

Hi,

I am new to the forum and have searched to see if I can find a fix for my issue.

My issue is whenever I use the Event Log Online Help link in any Event Notification all I get is transferred to this page Page Not Found

I am new to Windows 8 but I used this service regularly with XP. I don't know if it is a set up issue or if the help is not available for Windows 8 ... I hope the latter is not the case as I am trying to resolve a completely different issue.

Any assistance would be great!

A:Event Viewer - Event Log Online Help

Well, I am still trying to get the Event Log Online Help link in Event Viewer working!

Could someone tell me what their data values are in the following registry entries:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\EventViewer\MicrosoftRedirectionProgram
HKLM\Software\Microsoft\Windows NT\CurrentVersion\EventViewer\MicrosoftRedirectionProgramCommandLineParameters

My data entries are blank and I am sure there should be something .

Thanks

7 more replies
Answer Match 36.54%

I've noticed an intriguing event in Event viewer...


Code:
Log Name: Application
Source: Microsoft-Windows-Security-SPP
Date: 25. 1. 2013. 8:13:00 PM
Event ID: 8208
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: *************
Description:
Acquisition of genuine ticket failed (hr=0xC004C4AA) for template Id {88c92734-d682-4d71-983e-d6ec3f16059f}
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Security-SPP" Guid="{E23B33B0-C8C9-472C-A5F9-F2BDFEA0F156}" EventSourceName="Software Protection Platform Service" />
<EventID Qualifiers="49152">8208</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-25T19:13:00.000000000Z" />
<EventRecordID>3131</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>MaminaKanta</Computer>
<Security />
</System>
<EventData>
<Data>hr=0xC004C4AA</Data>
<Data>{88c92734-d682-4d71-983e-d6ec3f16059f}</Data>
</E... Read more

A:Curious event in Event Viewer concerning 'with WMC'

Well, i should probably update this thread. I contacted Microsoft support, which told me that they've never seen this kind of situation before, one by all accounts activated Windows 8 throwing this kind of errors. They surmised that Windows 8 Pro wasn't really activated on their side when I fired up the upgrade to WMC. (?!) It sure looked activated on my side. Whatever...

Nothing short of a reinstall could be done to help it, I've been told. So I've done it, it is just a 'demo' installation for me, I don't have anything other than browser installed on it. This time it didn't need phone activation, it did everything on its own. I guess the situation really really cleared up in the meantime.

Casualty? My Google mail account in Windows Mail. I had it syncing using EAS just great, and I've lost that.
Thank you Google for not being evil, yeah.

2 more replies
Answer Match 36.54%

On a daily basis I recieve this listing in the event viewer in administrative tools ? If anyone can point me to a fix or walk me thru one it would be great to eliminate this from being listed day after day . Here is a copy of the details of the event and what it reports >
Event Type: Information
Event Source: NSCService
Event Category: None
Event ID: 35
Date: 2009/08/09
Time: 05:56:29 AM
User: NT AUTHORITY\SYSTEM
Computer:
Description:
The description for Event ID ( 35 ) in Source ( NSCService ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Norton Protection Center Service. <<<<<<<<<<

Mt Norton Security Suite ,still updates my virus definintions and any other updates pertaining to the security suite ,so Iam a bit confused by the whole thing ? Thanks in Advance to All that Reply !!!
Take Care Nick

A:reoccuring event in event viewer !

Information items in Event Viewer are totally disregarded by me.

I can't tell you to do the same, it's your system...but those items are provided only for informational purposes.

None of them merit any action by the owner/user...there is nothing to fix.

Louis

1 more replies
Answer Match 36.54%

I have tried to change the properties of the SYSTEM event log, but changes will not stick.

I am trying to change the properties by right-clicking the sytem event log and choosing one of three options:Overwrite as needed
Archive the log when full
Do not overwrite events
The system is currently configured to NOT OVERWRITE, and I am missing the events leading up to recent crashes.

While I can click the first two options, the setting reverts when I press OK or APPLY.

Attached is a screenshot.

Note: I do not have this problem changing the properties of the Application log or Security log, but the System log refuses to change.

Currently running Windows 7 Pro (version 6.1) on an ASUS motherboard.

How to solve?

A:EVENT LOG - Cannot change event log properties

Have you tried to increase the log size and then see if they will stick?

4 more replies
Answer Match 36.54%

Greetings,

Not more than 3-4 months ago I built a new system in anticipation for WAR. The system was built to be, obviously, a gaming computer as well as a system I could do a bit of graphic programming on. Up until last month it was blazing fast, I mean insanely powerful until one day when I was playing TF2.

I had just loaded up the game, got ready to spawn into a 2fort server, walked out onto the sniper deck and I felt a massive system lag spike. Next thing I know there's blood all over the wall and my char had gotten shot in the head before I even knew what was going on. So I figured, maybe it just needs a reboot...

I rebooted and everything was fine until it reached the Windows loading screen. Once there it sat for about 3 minutes and finally booted completely. However, at that point, loading anything... games, web pages, you name it, took at least twice as long as it should. On top of this issue, the system lag spikes seemed to come every 3 hours and in groups of 2s for a session of 4 groups.

What I mean by this is:
1) APATI Error Event ID: 9 \Device\Ide\IdePort5 did not respond within the timeout period.
2) Disk Warning Event ID: 51 An error was detected on device \Device\Harddisk0\D during a paging operation.
~FEW SECONDS PASS~

1) APATI Error Event ID: 9 \Device\Ide\IdePort5 did not respond within the timeout period.
2) Disk Warning Event ID: 51 An error was detected on device \Device\Harddisk0\D during a paging operation.
~FEW SECONDS PASS~

1) A... Read more

A:APATI error event ID 9 & event ID 51

Hi Pyrrhic, welcome to TSF..

have you tried different SATA cables?

As you mentioned the drive may be starting to fail...it can happen to drives of any age so it would probably be an idea to download and run the manufacturer's diagnostic tools so you can perform some exhaustive checks on the integrity of the disk. That should give you a good idea if the drive is beginning to fail.

4 more replies
Answer Match 36.54%

In the wiever event every day i find 3-5 errors. the ID event is 78 SidebySide.
The errors is:

Activation context generation failed for "C:\Program Files (x86)\Nero\Nero8\Nero Toolkit\DiscSpeed.exe.Manifest".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.6002.18305_none_1509f852f40ee5cd.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.6002.18305_none_5cb72f2a088b0ed3.manifest.



Activation context generation failed for "C:\Program Files (x86)\Nero\Nero8\Nero PhotoSnap\PhotoSnap.exe.Manifest".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.6002.18305_none_5cb72f2a088b0ed3.manifest. Component 2: C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.6002.18305_none_1509f852f40ee5cd.manifest.



Activation context generation failed for "C:\Program Files (x86)\Nero\Nero8\Nero PhotoSnap\PhotoSnapViewer.exe.Manifest".Error in manifest or policy file "" on line . A... Read more

A:Wiever Event Event 78 SidebySide

Hello!

Sorry for the late reply. I am actually taking a short break until the weekend, but I will try my very hardest to provide you with a rapid response. This error is not particularly easy to fix, but it does have solutions and workarounds. However, you have it in its very worst form. VC++ versioning errors are best, post SP2 Windows components x86-x64 the worst, what you have.

The fixes will be slightly tricky, and I don't have very much time at the moment, so please try step one here: How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

Try for a day. If those errors don't appear, we have found the one using the other control. Otherwise, it is Windows, and we need to look at other solutions.

Do these applications work? If you start them manually, do you get this error message again, as I think you will?

I will explain more later.

Thanks again!

Richard

6 more replies
Answer Match 36.54%

I followed "etavares's" extremely helpful problem resolution thread here: http://www.bleepingcomputer.com/forums/topic403048.html

The service that I found to be causing my 30+ minute boot times is the "Windows Event Log". When disabled, my Toshiba Windows 7 laptop boots in less than a minute.

Any solutions for this issue? Need additional information?

Thanks!

A:Windows Event Log

From the thread you linked to: Posted 29 June 2011 - 10:24 PM Hello, I have noticed some improvement. 1:33 seconds to get to loging screen 1:50 for desktop to load 2:37 for firefox to load What's happened between June 29 and today that caused your power on to desktop to go from 1:50 (Fair for a desktop) to "my 30+ minute boot times" and HOW did you determine this is being caused by the "Windows Event Log" service? Please fill in the blanks, help us help you!Edit to add: I just noticed that the thread you lnked was not yours--you "followed" it...Anyhoo, disabling Windows Event Log is a REALLY BAD idea from what I read on Black Viper's system config guide (probably the best on the net) that was in the thread that you followed...

26 more replies
Answer Match 36.54%

Right so this is a relativly new build under 3 weeks old and all of a sudden today it BSODs mid game (Borderlands) after checked the event logs to find it is event ID 41 i check google and it says check your ram etc etc so i turn the PC off memtest my ram and it seems fine so now im abit stumped asto what i can do to fix this problem i dont believe there is anything wrong hardware wise i think it is to o with either Windows 7 or Borderlands or most likly the mix of the 2 of these...

System Specs:

Motherboard : ASUS M4A785TD-V EVO
CPU : AMD Phenom II X4 965 (3.4GHz 125W)
RAM : OCZ 2x2GB 1333Mhz 7-7-7-20 @ 1.8V (OCZP13334GK)
PSU : Corsair TX 650W
Graphics Card : Sapphire ATI Radeon HD 5770 Vapor-X 1024MB GDDR5

OS : Windows 7 Professional 64bit

Attached are the MiniDumps

befor now i have had no problems with BSODs altho i have had problems with borderlands befor when i did not have this GPU. I have been playing a few games today withoutany problem ( WOW and Rainbow six Vegas 2) both at 1920x1080 same as i was playing borderlands with no idssues at all


Thanks for your advice

Tonk

More replies
Answer Match 36.54%

How can I fix this problem?

I not sure if this is hardware related or MS related. Please let
me know if additional information is required to help dispatch this issue.

I new at this type of communication. Please excuse my un professional approach.

Thank you for your time.

OLEman42
 

A:Windows Event Log

OLEman42 said:


How can I fix this problem?

I not sure if this is hardware related or MS related. Please let
me know if additional information is required to help dispatch this issue.

I new at this type of communication. Please excuse my un professional approach.

Thank you for your time.

OLEman42Click to expand...

Hello and welcome to TSG. It's hardly unprofessional when you provide us with a log of the problem? Top class if you ask me.

Anyway, since that happened nearly two weeks ago and if nothing untoward has occurred since, I wouldn't worry to much. However, if it continued to show in the log, or if it did happen yesterday and your clock is out, there may be a problem
 

2 more replies
Answer Match 36.54%

I have a HP Microserver powered by a APC Smart UPS. Occasionally the server loses contact with the UPS meaning that it would not shutdown in the event of a power failure. It normally (but not always) manages to resume communication within a few seconds.
Communication is via a serial cable and a USB-serial converter (Prolific chipset). Server is running Windows7-64.

1) Anyone any idea how to stop the comms dropping in the first place? The server doesn't auto sleep and the allow the computer to turn off this device to save power option is disabled for the USB-serial converter.

2) Failing this I have been trying to write a script to automatically check if comms have been re-established and only email me if they haven't.
The path I have take for this is to attached a task to the comms lost event in the windows application event log (created by APC agent) and then to get a batch file to check for a comms established event with a later time.
The problem I am having is in extracting the time from the original event and passing it to the batch file. While this works when I get it to trigger from an event written by windows, it doesn't with an event written by the agent. I can't see any significant difference between the two in the event log though.

3) Any other ideas how I can accomplish 2? The alerting built into the agent just emails when commas are lost.

Thanks in advance.

************Alert from APC agent****************
Log Name: Application
Source: APCPBEAgent
D... Read more

More replies
Answer Match 36.12%

We monitor our Windows Security Logs using MOM 2005. We record all 626 events where User Accounts are enabled. A lot of the data collected includes account names (Target Account Name) that are actually the name of workstation (e.g., ws-2884$) that has been added to the domain. Before we filter out this traffic I was wondering if these WS additions pose any kind of security threat and should be logged or reviwed.

Thanks in advance for any help.
 

More replies
Answer Match 36.12%

Sorry for the long post. I've had this Samsung all-in-one for a while. I'm not sure exactly when it started, but I was getting the sound chime for Device Disconnect (Hardware Remove.wav) and Device Connect (Hardware Insert.wav) randomly. I would happen when I was using the computer, when it was in sleep mode, basically any time. I thought it was my WD external drives causing problems, but when I finally checked the events, it was complaining of errors on my OS and Recovery partitions of my internal drive. I ran the scans of the drives and it found errors and fixed them. Any subsequent scans are clean. However, I was still getting the chimes. Looked at the events and I'm getting some Warnings and Informational events around the same time and seems to be something related to event ID 140. It seems to happen during some sort of disk check. I get 2 warnings on each partition (H: OS & F: Recovery), followed by 2 each information events (Event 26 Windows - Delayed Write Fails), then 1 each information stating that each partition is healthy (Event ID 98). What seems strange to me, is that the Warnings are showing the device name as \Device\HarddiskVolume61 and 62, but the information events saying they are healthy show as HarddiskVolume64 and 65. And they change. Earlier this morning they were marked as Volume211 & 212 for the warnings and 214 & 215 for the healthy event. Any help would be GREATLY appreciated.

Running Windows 8.1 with Intel Core i5-3470T CPU @ 2.9... Read more

More replies
Answer Match 36.12%

I have an IBM Netfinity 5100 server with windows 2000 server sp1 loaded on it, i continually get EVENT ID 51 - AN ERROR WAS DETECTED ON DEVICE \DEVICE\HARDDISK0\DR0 DURING A PAGING OPERATION, the HDD has been replaced the SCSI backplane has been changed and today the Raid Card was replaced (firmware updates and BIOS updates of also been applied) there is 3 Disks in the machine and over 1 GB Ram, I can not find anything on the web

PLEASE CAN YOU HELP !!!
THANKSS RYAN
 

A:WINDOWS 2000 EVENT 51

THIS WAS RESOLVED BY APPLYING THE LASTEST SP FROM MICROSOFT !!!
 

1 more replies
Answer Match 36.12%

Hello,

i am having a lot if event viewers logs with errors and my laptop running very slow; can any one please tell me how to remove all those errors and how to clear event viewers log.

A:Windows 8 Event Viewers Log

Originally Posted by skkbgm


Hello, i am having a lot if event viewers logs with errors and my laptop running very slow; can any one please tell me how to remove all those errors and how to clear event viewers log.



see the similar thread below

2 more replies
Answer Match 36.12%

Today I was playing music on my computer and while I was out of the room it crashed. When I came back after the music stopped it was already at the BIOS screen so I did not have a chance to see if there was a blue screen or error message. When I looked in the event log there were no events logged for the time of the crash. This is the second time the computer has crashed in the past few days, and I thought that it was random since the last crash gave me a blue screen referencing the audio driver after I plugged in a USB headset while resuming from sleep. However, now it seems that this may be a recurring problem. I reinstalled Windows 7 64-bit several months ago after having many blue screens and I hope that the same thing isn't happening again.

Thanks in advance for any help!

A:Crashes in Windows 7 64-bit With No Event Log

STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION
Usual causes: System service, Device driver, graphics driver, ?memory

3 of your last 4 dump files blame your graphics driver atikmdag.sys. Many people are having issues with the latest Catalyst, 10.12. See this thread for issues. You may want to consider installing one of the previous Catalyst versions x64 x86. However, be aware that Catalyst v11.1 is due for release this week.

This driver is very old and is a known cause of BSOD's on Windows 7:

ASACPI.sys Mon Mar 28 03:30:36 2005 Asus ATK0110 ACPI Utility

Link to a copy of the latest MB WIN7 ATK

Outdated Drivers:

hamachi.sys Thu Feb 19 10:36:41 2009
lmimirr.sys Tue Apr 10 23:32:45 2007
LMIRfsDriver.sys Mon Jul 14 17:26:56 2008
RaInfo.sys Fri Jan 04 18:57:14 2008 LogMeIn

mv61xx.sys Fri Mar 20 03:48:21 2009 Marvell Support

SNCAMD.SYS Thu Jan 25 10:48:38 2007 USB 2.0 PC Camera (SN9C201) driver OEM
snp2sxp.sys Wed Feb 13 03:35:44 2008 Ditto??

Updates Available:

Rt64win7.sys Wed Jun 23 10:10:45 2010 Realtek LAN RTL811 v7.034

3 more replies
Answer Match 36.12%

Hi all
It's AGES and AGES since I did any programming -- but is it possible to run some sort of script / program when say a user defined event occurs. I know most OS'es have some sort of event triggering mechanism but getting at it is the problem.

This sort of stuff is second nature in Linux but how to do it in Windows ??

It MUST be possible --for example you can set the system to play sounds on a whole series of events such as when Mail arrives or when you start / finish navigation. This says to me that there must be some sort of event triggering mechanism -but whether it's acessible via an API ??.

I don't really want to do a whole load of C++ -- probably wouldn't know how to anyway -- just a simple method (if there is one).

Cheers
jimbo

A:Event Triggering in Windows --anybody know how to do it.

Windows Control Panel Sound applet has some sort of this feature built in.

Open Control Panel - Sound - Sounds. This section has a limited set of events. I am not sure whether it is possible to add new events to this list.

You can also see the excellent tutorial on Sounds Change by Brink.

Some of our learned members should be able to throw some light on the programming part.

7 more replies
Answer Match 36.12%

It has been a long, long time since I have wanted to clear the event log and that was under Windows 7. I would like to clear the log under Windows 8 but can find no way to do it. It seems like I remember using 'Clear Log' under Actions but that doesn't seem to be there in Windows 8.

Will someone please point me in the right direction?

Thank you.

A:Clearing the Event Log in Windows 8

This utility is just what you need and it works on Windows 8 too!

Event Viewer One Click Clear - Windows 7 Help Forums

Just right click and select "Run as Administrator" and all logs will be cleared!

5 more replies
Answer Match 36.12%

When I try to shut down I get the not responding message for N B E W , has anyone come up with the remedy yet ,or is it a process of elimination type deal ?
 

A:Net Broadcast Event Windows

Hi, let us have some Pc specifications.
Check and post
TSG System Information Utility - found here.
http://static.techguy.org/download/SysInfo.exe
======
Download Security Check by screen317 from.
http://screen317.spywareinfoforum.org/
Or
http://www.bleepingcomputer.com/download/securitycheck/dl/123/

Save it to your Desktop.
Double click the install icon.
If using Vista - Win 7 - right click the install icon and select "Run as Administrator"
A command Prompt window will open.
Let it scan the Pc - press any key when asked.
It should now open in Notepad.
Copy and Paste the result of the scan in the reply box below.
 

1 more replies