Tech Problem Aggregator

WiFi doesnt have valid IP configuration error

Q: WiFi doesnt have valid IP configuration error

hello....i have been using win8 for 2 weeks now and all has been great but this morn i try to go online and get the error of invalid ip config. been working on it for several hours to no avail. can anyone tell me whats going on please?

actually, i restarted the network and win8 fixed everything....all the win7 pc's were working while win8 did not......if someone can let me know how to remove this thread will be appreciated.

A: WiFi doesnt have valid IP configuration error

The thread doesn't have to be deleted, would be good for others to ad later on.

1 more replies
Answer Match 107.52%

After updating windows 10 last night. I woke up with this error I've googled and tried netsh commands but it didn't work. Any help would be appriciated. Also tried updating drivers, did not work. using the ipconfig /release causes no operation can be performed error
My ipconfig /all if anybody needs it

Windows IP Configuration

Host Name . . . . . . . . . . . . : Oracle
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Ethernet:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Killer E2400 Gigabit Ethernet Controller
Physical Address. . . . . . . . . : F8-CA-B8-05-07-C2
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Local Area Connection* 14:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter #2
Physical Address. . . . . . . . . : 9E-B6-D0-03-41-05
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wi-Fi:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Killer Wireless-n/a/ac 1535 Wireless Network Adapter
Physical Address. . . . . . . . . : 9C-B6-D0-03-41-05
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes... Read more

More replies
Answer Match 86.94%

I keep getting this error: "Wireless Connection doesnt have a valid IP Configuration" and there is a little yellow triangle on the WIFI connection I am trying to connect to. This connection is my next door neighbors and I have FULL PERMISSION to be using it, so no issues there. My problem is that now it is not letting me connect to it. Another error I saw was something about conflicting IP's.

What can I do to fix this? My neighbor lets me use his wifi for school because Im a virtual school student overseas and I have a lot of homework online and am in need of high speed internet. I am behind on several on my assignments and there's only 2 weeks of school left. Please help me connect to the wifi, it would mean so much to me.

I am currently trying to download ubuntu because I know I wont have this issue on there but my current internet speed is SO SLOW its saying I need a whole day to download it and that's too long.

I have windows 7 home premium

Thank you

A:HELP: Error "Wireless Connection doesnt have a valid IP Configuration"

First things first, did your neighbor change anything with his configuration? If so, what changed?

Please follow this guide and report back:
"Wireless Network Connection doesn't have a valid IP - Microsoft Community

1 more replies
Answer Match 86.1%

Hello all,

I bought a new laptiop HP 650. The wireless was working fine for couple of days until i believe it stopped working after falling into sleep mode according to the user. now, it connects to internet fine when it connects using a cable but with wifi connection, it says limited connection.i have reformatted the computer to factory default settings.
I have tried to run windows network diagnostics and the error it gives me is
Wi-fi doesnt have a valid IP Configuration..
What is the issue here.

The wireless network card is Ralink RT3290 802.11bgn Wi-Fi Adapter.

it says the driver is up to date.

Please help me out .

Thanks

A:Wi-Fi doesnt have a valid IP Configuration

Originally Posted by gans07


Hello all,

I bought a new laptiop HP 650. The wireless was working fine for couple of days until i believe it stopped working after falling into sleep mode according to the user. now, it connects to internet fine when it connects using a cable but with wifi connection, it says limited connection.i have reformatted the computer to factory default settings.
I have tried to run windows network diagnostics and the error it gives me is
Wi-fi doesnt have a valid IP Configuration..
What is the issue here.

The wireless network card is Ralink RT3290 802.11bgn Wi-Fi Adapter.

it says the driver is up to date.

Please help me out .

Thanks



Welcome to the forum gans07,

So this is a factory installation of Windows 8, complete with all the trial anti virus software's and endless bloatware which is guaranteed to cause problems.

First you should uninstall completely the trial version of which ever A/V software was preinstalled on this machine using the special uninstall tool. These trial A/V's tend to cause countless problems unless they are removed.

After that, if you can post a screen shot of the ipconfig/all from this machine it would be most helpful.

11 more replies
Answer Match 86.1%

my dad recently bought me an HP laptop for christmas. brand new, had never been used. it worked wonderfully up until we tried to connect it to the internet. it told me to reset my router, which i did and it took me through a bunch of troubleshooting guides. it kept telling me at the end of all of the troubleshooting that the connection was "unauthorized" and that i didn't have a valid ip configuration. however my father has a toshiba laptop and his connects to the internet fine. he uses linksys.

so he called HP and spent hours on the phone with them and they came to the conclusion that there must have been something internally wrong with the computer and that it was defected. so today we returned it, got our money back, and bought an ACER laptop. the lady at the customer service counter told us she had problems with her HP and said we should probably try a different brand. so we bought the acer aspire laptop and its having the same problem. it wont connect because of the IP address configuration. we've literally done everything.

the only difference between our laptops besides the brand is that his is windows vista and mine is the new windows 7. has anyone else had a similar problem and knows how to repair it?

please leave any information below.

A:Ip doesnt have valid configuration, help!?!!?

i assume this isn't wireless - have you tried a different port on the router?

8 more replies
Answer Match 85.26%

Hi guys,

I had a new modem/router put in my home yesterday from our broadband provider however since having it I've had nothing but issues. Our previous router never caused any issues despite being old. This is wireless btw.

There have been countless problems, I'll list them below so its easier for you to read.

1. Keeps disconnecting.
2. Alot of the time when the adapter is connected to the router it says 'no internet access'
3. unknown network symbol.
4. Only usually connects late at night or specific times of the day
5. Sometimes if can't even pick up the router!

6. troubleshoot messages have ranged from:

-wireless doesnt have a valid IP configuration

-problem with wireless adapter or access point

-the default gateway is not available


I'm really getting sick and tired of this and I feel powerless because I house share with people and there all enjoying there super fast broadband with no problems.

I have windows 7 64-bit if that helps?

Thanks to anyone who replies!

A:wireless doesnt have a valid IP configuration?

Sounds like your new router could be using a channel that's being heavily used already in your area. Connect to it via wire, log in to the administrative interface, and try changing the channel setting. This may require a bit of trial and error as wifi channel bands overlap each other and can interfere with each other. You can also try turning up the transmit power on the wireless radio, use WPA or WPA2 instead of WEP (if it is using WEP right now), turning off 802.11b support, and make sure (though this is unlikely) that it's operating strictly in 20MHz mode, not mixed or 40MHz mode.

3 more replies
Answer Match 85.26%

A few days ago I had to restart my PC after a game froze. When I booted up again I found I was unable to connect to the internet. Troubleshooting gave the error 'Ethernet doesn't have a valid IP configuration.'
I can connect to the modem with my laptop using the same cable, so I don't think its an issue with the router or
cable. I was told that programs could cause issues with the network adapters, so after backing up my data I wiped my computer and re-installed windows from a bootable usb.

Here is the IP config data.



I've run the flushdns file, but it seems to timeout while running the Ipconfig /renew command.

Following instructions from another thread I was told to reset the TCP/IP stack. Running the command gave the following.
From there I followed instructions to use regedit to change permissions, which enabled me to run the command without errors, however I was still unable to connect to the router when my computer reset.

Any help to resolve this issue would be greatly appreciated.

A:Ethernet doesnt have a valid ip configuration

You are getting a 169.254 address, whigech means that your computer is not getting a DHCP address and is assigning itself an IP in the APIPA range.

I'd reboot your router, and ensure that the DHCP server functionality is enabled.

2 more replies
Answer Match 83.16%

Some of you may know i had issues with changing my mac address and all. I finally fixed and it worked for a day until out of no where my wifi connection crashes and when i trouble shoot it says "wireless network connection doesnt have a valid ip configuration"... I have tried some fixes but none of them worked.

It might be related to what i did yesterday, what i did is setting ipv4 and ipv6 from my wirelesss adapter to auto set and it worked flawless for a day.... I have no idea what was set before that but im at this point where im about to just format the laptop

A:wireless network connection doesnt have a valid ip configuration

So i formatted my computer and it still gives me that. Its weird because if it was mac address filtering im pretty sure it wouldnt say that it would say problem with router

2 more replies
Answer Match 83.16%

I am trying to connect my laptop to our wireless internet but I keep getting the issue that my wireless internet connection doesnt have a valid ip configuration. What do I do about this?

A:wireless internet connection doesnt have a valid ip configuration

First check to make sure your notebook doesn't have it's IP hard coded. It should obtain an ip address automatically. Let us know if this is the case, and we can go from there.

2 more replies
Answer Match 82.32%

Hello!
recently i was having some problems with my internet connection. it seems to just disconnect or just "worsen" for some time( packet loss and what not).
the thing is,we recently changed the router and the ISP claims that the router doesn't seem to have a problem and what seems more likely is that one of the computers in my household is infected with a internet virus.
the previuos router i had,whenever i tried to use the windows solve maker (my computer is in Hebrew so im not sure about its name), its said something about the DNS,and whenever i used the command ipconfig/flushdns it seemed to fix it, now,even that wont work! and if my internet drops i need to restart my router.
 
my Question is: how can i be sure i am not infected with some type of virus that affects my internet connection? i use Avira and i scanned the system with no results.
the tech support offered me to do a test, plug one computer at a time and see if the internet drops, if it doesn't drop it means it isn't computer problem.(i have 4 computers in my household, 1 laptop and 2 are for me and my brother, an every pc except the laptop are connected directly to the router via cable).
and i am doing it now.
 
Thanks in advance!

A:Local area conection doesnt have a valid ip configuration (windows 7)

Hello -
Is the output of these computers fully in English. or a mix of Hebrew and English ??
 
Please start with the most likely infected computer Only - (test one at a time).
Please list the Make and Model of computer, if known, and Operating System -
Download all programs to Desktop, and Copy and Paste all logs -
 
All scans should be performed in Normal Mode and not in Safe Mode unless requested.
Do not alter the output of any logs prior to posting them back here -
 
 
First -
Download Security Check by Screen317 from HERE
* Save it to your Desktop.
* Double-click SecurityCheck.exe
* Follow the onscreen instructions inside of the black box.
* A Notepad document should open automatically called checkup.txt; please post the contents of that document.Note: If a security program requests permission to access the Internet, allow it to do so.
 
 
Next -
Download MiniToolBox, Save it to your desktop to run it.
Close any Firefox browsers you may have open
Checkmark the following boxes:
•Flush DNS
•Report IE Proxy Settings
•Reset IE Proxy Settings
•Report FF Proxy Settings
•Reset FF Proxy Settings
•List content of Hosts
•List IP configuration
•List last 10 Event Viewer log
•List Installed Programs
•List Users, Partitions and Memory size.
•List Minidump Files
Click Go and copy / paste the result (Result.txt).
 
 
Next -
Please download and run RKill by Grinler.
A black... Read more

2 more replies
Answer Match 80.22%

I am not sure how I repair this problem but every few day my internet access stops working on a windows 8 platform. when I run diognostics it says WiFi does not have a valid IP Configuration. I am sendding this on a different computer using the same network so I know it is not a problem with our network or router. other computers on windows 7 are not having a problem including this one
 

A:wifi does not have a valid ip configuration

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If you need help with that see TSG Posting a Screenshot. FWIW to take screen shots with Windows 8 or 7 or Vista I prefer to use the built-in Snipping Tool.

Also show for a good connection and for the problem condition ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

3 more replies
Answer Match 80.22%

I ran a system restore as my Acer computer was acting a bit strange. When it rebooted I could nolonger access internet. Tried numerous thing ie, safe mode.malwarebyte but scan incomplete because I can't get online for update. Computer repair says I have a virus. Wifi works fine on all my other devices. Please Help

A:No valid IP configuration for Wifi

Before System Restore, how was your computer acting strange? Did you see pop-ups or was it slow?
FYI, it's possible to undo the changes System Restore has made, but before that, let's check some network issues.
Can you ping 127.0.0.1 and 8.8.8.8 and google.com ?
 
Press the Windows Button and R simultaneously.
A small window called "Run" will appear, typ in cmd
A new window will open, here you can use the Ping command. (ping [IP-Address or Hostname])

1 more replies
Answer Match 79.38%

I am on Windows 8. My Lenovo laptop constantly has a "Limited Connection" when trying to connect to internet. Other computers/devices connect fine to this network.

I ran the built in diagnostic and get "Wifi doesn't have valid IP configuration - Not Fixed"

I've tried ipconfig /release => no errors
then...... ipconfig /renew => and I get "...unable to contact DHCP server.."

I then tried resetting TCP/IP
`netsh int ip reset resettcpip.txt` =>
resetting interface, ok!
resetting neighbor, ok!
resetting path, ok!
resetting , failed.
access is denied

What should I try next?
Please Help!
 

A:Wifi doesn't have valid IP configuration

Can you connect successfully by ethernet?

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If your only email accounts are free (Hotmail, gmail, etc.) try this direct link. If you need help with a screen shot see TSG Posting a Screenshot. FWIW to take screen shots with Windows 8 or 7 or Vista I prefer to use the built-in Snipping Tool.

Identify your network if it is not obvious.

Also show ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

1 more replies
Answer Match 79.38%

sir i have the same problem,i used to connect to my collage wifi , which is powered by sonicwall for the past 1 year,but i can t able to connect it anymore from my room.... i use TP link wifi routerTL-WN7200ND...my singnals are good in my room buy it not connecting,sayin unidentified network...i tried formating c dive and re installed OS and all, i tried even windows 7,but my problem is not solved,i have huge head ache with this for the past two days,,plsssss help me....
i tried ipconfig cmd command and many, but none of them worked for me.........
i forgot tell something,i can connecto the proxy from a 10 rooms after my room,with the same singnal strength......
but not from my room....

A:wifi does not have valid ip configuration in windows 8

this if from my friends room

5 more replies
Answer Match 79.38%

Background:
I was a happy user of Windows 7. I did the upgrade to Windows 8 and the internet connection seemed to work fine for two days. Then a couple days ago, Windows did the usual software updates after which I shut down my computer. Next time I opened it up (yesterday), it would not connect to the internet no matter what. I am computer savvy so tried all the usual suspects but to no avail. I used the troubleshooting tool which came up with "WiFi does not have a valid IP configuration." Please don't tell me to turn off/on the router. Tried that and it doesn't work. The microsoft forums have been mostly useless as well. I've also tried the following from the command prompt (run as admin):

netsh winsock reset catalog (reset winsock entries)

netsh int ip reset reset.log hit (reset TCP/IP stack)"

Then rebooted and still no luck.

I'm inclined to think this may be a compatibility issue, perhaps the drivers. I have a Toshiba Satellite P750. The bottom line is that my computer is now a useless brick and it's costing me money by not being able to get online (for my work).

Below is my ipconfig /all information. I am hopeful that someone may have useful information to solve this problem once and for all. My only other option is to revert back to Windows 7 (which actually does work) and avoid Windows 8 until it becomes a relatively bug free and viable OS. Thanks for your help.

ipconfig /all details below
Microsoft Windows [Ve... Read more

A:Windows 8 Wifi does not have a valid IP configuration

Since we're talking about wifi (wireless networking) I suspect you have a laptop. What I'm thinking is that the driver windows 8 has given you is not happy with your wireless card. More than 1 users suffer from this. Try updating the driver. Though not by the standard way of updating, since its just gonna say it already had the most updated one.
If you have another laptop/computer avaliable, Search for the driver on that one. Remove the previous driver and install a new one. I hope this will work for you.

1 more replies
Answer Match 79.38%

After much thought I recently did a fresh install of my OS everything was working before just wanted a fresh start.
Since I did the fresh install I'm getting wifi doesn't have a valid up configuration and for the life of me I can't seem to figure it out.
This is on a desktop and I can't use a wired connection also I have tried resetting the router. And refreshing windows 8 again. Mind boggled.

A:Wifi doesn't have a valid up configuration

Originally Posted by Russee89


After much thought I recently did a fresh install of my OS everything was working before just wanted a fresh start.
Since I did the fresh install I'm getting wifi doesn't have a valid up configuration and for the life of me I can't seem to figure it out.
This is on a desktop and I can't use a wired connection also I have tried resetting the router. And refreshing windows 8 again. Mind boggled.



It's likely that your machine with the new installation requires a visit to the Windows Update Center in order to install the latest updates which will most likely fix the wireless connection problem.

You really need to connect the first time using a wired connection so as to obtain the updates from Windows.

3 more replies
Answer Match 78.54%

The wifi is not working only on my laptop since 2 days! it was working before and it still is working with all other gadgets and other laptops just not working with my HP laptop.it installed some windows update couple of days back. please guide me as to what needs to be done. i will post relevant info from my side or post screenshots to provide you all the necessary info from my side.

i have tried

netsh winsock reset catalog (reset winsock entries)

netsh int ip reset reset.log hit (reset TCP/IP stack)"
i have also tried restoring to the last recovery point.

nothing has worked so far. please help!

A:wifi doesn't have valid ip configuration windows 8

Try rebooting your router. Also maybe doing a reset on the router.

1 more replies
Answer Match 78.54%

Hello everyone,

I come to you after i wandered and tryed all reset protocol as possible throughout the world ... I've never done this before ... But ... I can't wait anymore ... So I come on forums looking for a kind soul ...

So my problem:

My computer worked fine until now ... Then I tried to connect on the new ethernet of my apartment (in Japan) ...

And then ... This is the drama ... No More valid IP configuration on all my connections.

I'm on Windows 10.

I have three types of connections that works on my other computer:
Ethernet: Net Asahi Fiber Optics.Wifi: Softbank Pocket Wifi.Usb sharing connection: NTT Docomo on Android Huawei.

For the three: No Valid IP configuration appears.

I tried :
Norton analysisregisters integrity analysis.Uninstall all my network card drivers and reinstall them by restarting each time.Reset my IP setting / TCPIP / Winsock / flushdns / release ipconfig / renew with all controls can be found on the net admin ...Spend my Ip automatic search and DNS Protocol on IPV4 and IPV6Disable my Norton firewall and windows.Delete my winsock register 1 and 2 and restore.Restart DHCP service.Reset all my routersThe resolution tool for windows network problems (100 times)Reinstall the protocol of connection C: \ Windows \ INFSpend 2 hours with Windows 10 technical service (charming person) but could not help me ...

Well ... I think I've been around ...

I am joining you :

ipconfig / all with three connections.A Windows error rep... Read more

More replies
Answer Match 78.54%

Hi,

I have a relatively new HP Envy (H8-1485ea), with no modifications made, running windows 8. I have had the been using it with a wired connection at university with no problems and on return home connected wirelessly. Initially I encountered no issues, however after about 2 days the status of the connection went to limited and has remained that way since.

On running the windows troubleshooter it stated that the "wifi doesn't have a valid ip configuration".

I searched this forum and found the suggestion to run the commands which resolved similar problems:
netsh winsock reset catalog
netsh int ip reset rest.log hit

However as shown in the attached image for the second command resetting failed. I am not sure if this is where I am going wrong or if there is another issue.

I have also attached my ip configuration.

Any suggestions on how to resolve this problem would be much appreciated, Thanks.

A:wifi doesn't have a valid ip configuration (Limited)

Do you have anything else connecting to the router that actually works (either wired or wirelessly)?
Have you tried power cycling the modem and the router?
Have you tried an ipconfig /release and then an ipconfig /renew after power cycling both?

30 more replies
Answer Match 78.54%

Hello

I have a problem that drives me crazy. Randomly, my wifi disconnects many times a day (Limitted conectivity or ), sometimes every 5 minutes. I solve the problem temporarly by:
1.)Running the Troubleshoot of the wifi connection, and it resets the adapter automatically( and at the end of the troubleshotting it says: "WiFi doesnt Have a valid IP configuration, or sometimes The default gateway is not available")
2.)Sometimes the Troubleshooter cant reset the adapter, and I have to do it manually.

By reseting the adapter, the problem is solved only temporarly, because I have to do that mayby 20 times a day, sometimes more, sometimes less.

I use Windows 8 on Asus K55 VJ , Intel Centrino 2230 adapter with up to date driver.

PLEASE, PLEASE help me, the laptop is new, its sold as a Windows 8 engine, and its really embarrassing that I have this problem...

Here are some print screens that can help you

A:WiFi doesn't have a valid IP configuration on Windows8

For default gateway problems try typing in the gateway "192.168.10.1" into the IPv4 properties of the wireless network adaptor.

Sometimes windows has problems picking up the gateway from certain routers which is usually just a hardware compatibility problem.

The link below explains the process.

Windows 7 Unidentified Network, Limited Access, No Internet Connection Problem Resolved

I posted a picture of this setting for clarity.

6 more replies
Answer Match 77.7%

Before I bring this computer in, I'll try one last shot with posting on forums rather than just reading them.

I've tried just about everything I can think of to google, and coming to those more literate in hopes that I've missed something in my travels. Though I've tried all the usual suspects, setsh and all the rest, I'm fine with re-trying everything from the beginning as well.

Here's the specs and the answers to some common questions:

C:\WINDOWS\system32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Thibs
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Local Area Connection* 4:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter #2
Physical Address. . . . . . . . . : 34-02-86-70-D5-65
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek USB GbE Family Controller
Physical Address. . . . . . . . . : 9C-EB-E8-20-08-49
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::2412:f07c:6753:b795%12(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.183.149(Preferred)
Subnet Mask . . . . . . .... Read more

A:Unidentified Network/valid IP configuration: both Ethernet and WiFi

When you see your IP address in the 169.254.xxx.xxx range that means you are not getting a DNS from your router. Try to turn your router off for about 15 seconds and then turn it back on and see if that helps.

You may have to restart your computer also.

1 more replies
Answer Match 74.76%

hello all,

my internet has previously worked without any problems. two days ago, it said i was connected with limited connectivity. i tried disabling/enabling my wireless, unplugging the wireless router, and running troubleshoot. the computer said that my wireless network connection doesnt have a valid IP configuration. neither of my roomates had this issue (they can still get to the internet fine). i was worried that it was something with my internet, so i went to a friends house and it worked there. i then ran system restore to a period when internet worked, thinking it could have been a bad update, but still no change. i went into my IP address configuration, and it is all set to automatically find. not sure where to go from here. any help?

i have an asus computer, windows 7 ultimate (32bit).

A:"Wireless network connection" doesnt have a valid IP configuration...

If you can type ipconfig/all into an Elevated Command Prompt then post a screen shot of the results it would be very helpful.

It sounds like the wireless profile for your home connection was somehow corrupted or changed.

You can usually straighten that out by going into the Wireless Connection Manager in the Network and Sharing Center and making sure that the settings match the ones in your router.

The Bonjour service which installs with iTunes and Adobe Photo shop is also famous for causing this problem.

To fix ...
Run MsConfig

Under the Services tab uncheck the service called "##Id_String1.6844[... and then a bunch of numbers]" by Apple

Reboot and problem solved

To delete the Bonjour service.
1. Navigate to C:\Program Files\Bonjour
2. Rename the mdnsNSP.dll file in that folder to mdnsNSP.old
3. Restart your computer
4. Delete the Program Files\Bonjour folder

9 more replies
Answer Match 74.76%

so i have a router and a modem. and 2 computers, a laptop and a desktop.

usually i use wireless on my laptop and LAN on my desktop.

this is my problem.


my laptop has internet and is working fine. my desktop though cant connect to the network and when i try to troubleshoot it says "local area network 3 doesnt have a valid IP configuration.


ive tryed system restore and it didnt help.


any suggestions? i really need my desktop to be connected!

ty in advance

A:"LAN3 doesnt have a valid IP configuration" problem

and ive looked everywhere on web and none of the forum posts have helped D:

2 more replies
Answer Match 73.92%

I have looked at almost every post on the forum and have tried different steps to correct my issue with no luck. I have a wired connection to my modem and its green light on both ends of the connection. In Network and Sharing it says Unidentified Network. I IPv4 is set to obtain IP address and DNS automatically, but no luck. Reset my modem to factory settings and same issue. Ethernet cable works when I plug it into my laptop, but stops working when I plug it into my PC.

ipconfig.txt

More replies
Answer Match 69.3%

Hi all,
I recently got windows 8 and have found it to be rather volatile. I use WiFi in my house on my desktop Intel PC and my computer strangely sometimes works to get to the internet and sometimes it doesn't coming up with connection limited and after troubleshooting it "doesn't have a valid ip configuration". Ive tried the netsh winsock and the ip reset commands in command prompt (admin) and nothing happens i'm really at a loss. According to some people A/V programs can mess stuff up so i uninstalled them. hopefully someone can help here is my ipconfig/all details.

Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.



C:\Windows\system32>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Windows8
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Local Area Connection* 11:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 00-0D-A5-A0-0C-90
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Mike:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 802.11n USB Wireless LAN Card
Physical Address. . .... Read more

A:Wifi Problems "doesn't have a valid IP configuration"

From this you aren't picking up anything from the router at all, the IP showing is the default one that Msoft uses when there are no connections coming from the router.

You may want to try resetting the router or updating the router's firmware.

Your system specs aren't listed so I can't check to see if this is a possible driver problem or not.

3 more replies
Answer Match 69.3%

Hi,

I have Vista 32 bit Home Prem and am trying to change the settings on the Backup program. It was working fine up until 3 weeks ago, when my external h/d was accidentally dropped, then the backups failed from then on. I now have a brand new external h/d.

The program detects the location of the h/d just fine, however when I get to the screen asking which disks to backup, the program is not detecting the C & D Disks. It says Unknown (C) Missing, total size 0 bytes; same for the D Drive.

The program allows me to continue with the setting changes and I get all the way to the end and I get this error message:

Back up Configuration is not valid - error 0x81000029.

I've attached images of the screens with the error message.

I'm growing very frustrated by all of this as I REALLY need to back up my data!

Thanks,

Colleen

More replies
Answer Match 67.62%

So I have been having this computer issue for a while now.
About 2 weeks ago I left my Lenovo Win 8 laptop while it was performing windows update. The next morning I came back and I couldn't connect to any networks at school or home. So I decided to reset my laptop since its fairly new which solved the problem. However again this week when it automatically updated and now it won't connect again and Troubleshooter says "Wifi does not have a valid IP configuration" I have read a lot of solutions and none have worked like reset the winsock and Ipv4. Any ideas why?
Here is my ipconfig/all settings:


Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : home

ireless LAN adapter Local Area Connection* 13:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Hosted Network Virtual A
Physical Address. . . . . . . . . : 9E-4E-36-A1-82-C8
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

ireless LAN adapter Local Area Connection* 11:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Ada
Physical Address. . . . . . . . . : 9C-4E-36-A1-82-C9
DHCP Enabled. . .... Read more

A:Win 8 "Wifi Does not have a valid ip configuration"

Bring up search

Type control panel
click it on the left when it comes up
click System and Security
Click on Windows updates
Then click on Windows update History
On of these is causing the problem.

You can do a system restore to before the updates and probably get back to working but as soon as these install again, your problem will return.

I would do the restore and then install them one at a time until the problem comes back, then you know you can uninstall it or restore to before it and don't install tht update.

I know, a lot of work, but without knowing exactly which updates were installed we're flying blind.

5 more replies
Answer Match 67.62%

Hello,

After the Windows 8.1 update my laptop stopped being able to use the internet on a certain network. It connects but says limited. After a diagnostic i get the message "wifi" does not have valid IP configuration.

I have spent a long time going through various fix routines, reinstalled drivers. Nothing seems to work.

Other devices can connect to this network fine.

Any help would be greatly appreciated.

More replies
Answer Match 61.74%

I just got my internet hooked up in my new apartment yesterday, and it is not working when plugged directly into my laptop. It worked fine on the installer's laptop, though.
A buddy of mine let me borrow his wireless router and the wireless works fine with that, although if I try to connect wired through it, that does not work either.

It says I'm connected to an unidentified public network and I get the above error when I try to connect. I've tried disabling IPv6, restarting both the modem and my laptop, and updating the ethernet driver, which I could not find (HP dv2715nr is my model and I have windows 7 ultimate).

Below is my ipconfig with the modem plugged in and the wireless turned off. Hope this is enough info and thanks for any help!

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Allan>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Allan-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : Belkin
Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter
Physical Address. . . . . . . . . : 00-1A-73-F8-E0-14
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter... Read more

A:' "Local Area Connection" doesn't have a valid IP configuration' Error

8 more replies
Answer Match 61.74%

So here is my story.
For the last few months my desktop was working fine. Today morning by mistake i switched electricity off during my desktop shutdown. Later then i started my computer I saw many services like DHCP client, Windows firewall, base filtering engine and some others doesn't start with error code ACCESS DENIED.
After reading few articles and microsoft recomendations I found the reason of this error. I added permission into the registry to these services for SERVICE AND NETWORK SERVICE users. After that all services begin work fine.

But I still cannot connect to the internet. After running troubleshooting i receive and error message.
"Local area connection 2" doesn't have a valid ip configuration.

It looks like something happened with registry setting or permission which doesn't allow to work network services in proper way.

May I have some help please.
 

A:Lost access to the internet with error "doesn't have a valid ip configuration"

6 more replies
Answer Match 59.22%

As the above title describes ""Local Area Connection" doesn't have a valid IP configuration"

I've tried every possible fix. CMD -> ipconfig /release - ipconfig /renew - reboot computer, nothing happens.

On the Network Sharing Center - I get my Network shown as "Unidentified Network."

I tried Uninstalling and Re-Installing the NIC, no luck. Updating the Driver didn't help either as it says it's up-to-date.

I've tried manually assigning the IP address, but I don't think I did it correctly, as I am quite new with Networking problems and especially with all the IP addresses', DNS, DHCP. etc. So I need support with that and try it out whether that fix will work, although I doubt at this point since I tried everything.

I tried disabling the IPv6 as well that did nothing too.

I also RESET my router, which also had no affect. I am using the VIRGINMEDIA SUPER HUB ROUTER. It's a Fibre Optic Connection.

I also called my ISP, they suggested the Internet is all stable and has no connection problems. The Technician I spoke to over the phone said that there is something at fault with my computer itself and not the Router or Internet connection. In other words, my NIC.

My wireless connection works without any issues, but when I plug-in my Ethernet Cable on the back of my Computer (Motherboard) it does not detect any Internet Access and I get the " Unidentified Network." When I troubleshoot it gives me that error whic... Read more

A:"Local Area Connection" doesn't have a valid IP configuration" Error.

Lets take a peek at your network environment:

First:

Power Cycle everything . . Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet.

Then:

Then: check your browser's settings, remove any proxy settings if found here's how.

Then:

with the pc connected to the router, Click on Start . . Run . . type CMD

At the > prompt type type the following command: IPCONFIG /ALL

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

Right click in the command window and choose Select All, then hit Enter. Come back here and Paste the results in a message.

If you are on a machine with no network connection, use a floppy, USB drive, or a CD-R disk to transfer a text file with the information to allow pasting it here.

19 more replies
Answer Match 58.8%

HiHad this laptop for a few weeks now and never had trouble connecting to wifi at home. But today I am unable to connect to wifi and I did a troubleshoot and it says that the problem is - 'WiFi doesn't have a valid IP configuration'I know the problem is my laptop and not the wifi as it is working fine on my iPad.Can someone help please?Thanks,Dee

A:Can't connect to wifi - 'wifi doesn't have a valid IP config...

Hi there @Dee85 Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you are having troubles with connecting to your home network; I am happy to help. Have you tried connecting to a different network with this notebook?Does the wifi (available connections) show up on your notebook at all?Have you tried resetting your wireless router? The error you are getting sounds like the router is not passing on a local IP address to your notebook. The problem could be on either side of that. Try working through these.Troubleshooting wireless network and Internet (Windows 8)Also, you can look at the power management for your wireless adapter:Disable the Power Off option for the adapter:1. Open Device Manager. (Win Key+R > type devmgmt.msc > OK)2. Expand the Network adapters.3. Right click on the Ethernet/Wireless Adapter and click Properties.4. Click the Power Management tab.5. Remove the check mark beside Allow the computer to turn off this device to save power.6. Click OK.7. Test. Forget the network: (Windows 8)1. Press Windows Key + C2. Click Settings.3. Click Change PC settings.4. Click Network on the left.5. Click Manage known networks.6. Click the network name.7. Click Forget.Reset the TCP/IP settings on your PC:1. Go to your start screen/menu and type CMD.2. Right click on the command prompt icon and chose Run as administrator.3. In the wi... Read more

7 more replies
Answer Match 57.96%

Hey everyone,

I know this seems like a pretty common problem just by looking on Google or on here. I have tried quite a few things and a cannot seem to get internet. Here is my problem.

Work has 3 Computers. 2 Desktop 1 Laptop (all running windows 7). Moved premises and got the internet connected. Once internet was connected, simply plugged all 3 computers into the router. 2 of the three computers worked and received internet, the third one hasn't. I keep getting the "no valid IP Configuration" on the computer.

Have tried different routers, new cable still nothing. Have looked at the router and network driver to ensure that they are up to date. Yes, still nothing. Thought that maybe it may have been a network card, so plugged both computers into the lan cable, still same error. Looked at router settings, cant seem to find anything out of the ordinary.
Just seems strange that 2/3 computers worked without anything, now this one is not playing the game. Have not tried reinstalling Windows, can do so if you think this will solve the problem. If not then a solution would be great.

Cheers

Deazy
 

A:LAN no valid IP Configuration

9 more replies
Answer Match 57.96%

I am not able to connect to the internet using my Windows 7 computer.

It is connected to internet via LAN. So, the router is not directly connected to this PC. The owner of my router is my neighbor.

Internet works for him very well using the same connection. Only my LAN connectivity does not work.

Here is the IPCONFIG info. Any one help me, what can i do to resolve this issue for my client PC.

A:LAN does not have a valid IP configuration

Did you blank out the default gateway, or is it blank already?

Can you connect to the network at all?

9 more replies
Answer Match 57.96%

Hi,

I just bought a Samsung Ativ today. I got home, turned it on and tried to connect to my wireless, however I get the error message identified in the title, along with the network settings saying that it is an 'unidentified network'. I tried doing the netsh commands in the cmd prompt, I uninstalled Norton AV, nothing seems to work. An ipconfig/all in cmd showed that DHCP is enabled and I've got a subnet mask but no default gateway. I'd copy it here but I can't heh.

Help would be greatly appreciated!

edit* Here's an ipconfig/all... imgur: the simple image sharer, sorry in advance to your neck!

A:No valid IP configuration

169.254.x.x is an IPv4 Auto configuration address assigned when a machine cannot find or receives and invalid address from the DHCP server.

Does this happen when you plug your machine in via ethernet?

Also does this affect other machines on the network, if so what OS do they run? It could be a driver issue or a software issue regarding your router

Are there any other Windows 8 computers on the network?

Josh

26 more replies
Answer Match 57.96%

I've had this since I installed 8, but other little things kept me busy and since the PC is on all day, it's not been a big inconvenience, I would like to get it fixed however.

When I boot up the PC does not connect to the net.

When I trouble shoot it, it connects and gives the message

"ethernet" doesnt have a valid ip configaration fixed.

A:ethernet doesnt have a valid ip configaration

Originally Posted by Dellboy7


I've had this since I installed 8, but other little things kept me busy and since the PC is on all day, it's not been a big inconvenience, I would like to get it fixed however.

When I boot up the PC does not connect to the net.

When I trouble shoot it, it connects and gives the message

"ethernet" doesnt have a valid ip configaration fixed.



If you can post a screen shot of the ipconfig/all from this machine it would be helpful.

15 more replies
Answer Match 57.96%

Hi Guys,
I have a problem:
at every boot i get a bluescreen and the error 0xc0000098. The Boot configuration Data doesnt contain valid information for an operating system.

The last time i got this error i reinstalled windows, this was last week and today i have the same error again. I tried to repair windows with recovery disk- no effect. Wether it says that my disk is locked or it doesn't find any errors. I have no idea what i can do next. Help, please

More replies
Answer Match 57.54%

Hello , ihave an HP pavillion G71 340us that uses wifi link 1000 BG. I have my wifi drivers installed properly and everything set accordingly but when ever i turn on it on i cant see any wifi signals or any wifi at all to connect to . I am able to use a usb modem to connect to the internet but i cant use wifi because it doesnt show me available wifi to connect to.

A:My wifi card doesnt receive wifi signals

Dear Customer, Please try the below troubleshooting:http://hp.dezide.com/ts/start.jsp?guide=wirelessconnection.net&section=social   Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

1 more replies
Answer Match 57.54%

My landlord recently updated his apple router and i am now unable to connect to the internet. The flow of internets is from the ATT high speed connection that goes from the modem, then to an apple router, and then plugs into his ethernet port which sends it to the ethernet port at my apartment.

When I use the windows 7 networking utility it tells me that <device name> does not have a valid ip configuration.

I've tried the following script:
@Echo on
pushd\windows\system32\drivers\etc
attrib -h -s -r hosts
echo 127.0.0.1 localhost>HOSTS
attrib +r +h +s hosts
popd
ipconfig /release
ipconfig /renew
ipconfig /flushdns
netsh winsock reset all
netsh int ip reset all
shutdown -r -t 1
del %0
and I've made sure it automatically assigns IP.

Attached are the results of ipconfig/all and my system specs:
http://i.imgur.com/wtJE9.png
http://i.imgur.com/iwiwz.png

A:<device name> does not have a valid ip configuration

Try Going to control panel>Network and sharing center>Change adapter settings Disable ALL adapters, wait for 5 mins at least(important) then enable it again later.

2 more replies
Answer Match 57.54%

Hi there,

I have a LENOVO laptop with a windows 8 platform. For sommes reasons I do not have access to internet any more.

I get the following message : WI-FI does not have a valid IP configuration

Can anyone help with this issue please,

Regards,

Pascal
 

A:Solved: WI-FI does not have a valid IP configuration

6 more replies
Answer Match 57.54%

Hi,

I downloaded and installed Windows8 RP a few days ago in one of my friends PC. (Intel i3 processor with 6 GB RAM). It installed without any problem but when I setup up internet connection (wired broadband) it crashed and restarted showing some error which couldnt be read. When i tried to diognosis the problem it shows 'Ethernet does not have a valid IP configuration' message!
What should I do now? Plz help. Thanks in advance.

Riaz

A:'Ethernet does not have a valid IP configuration'

Originally Posted by Riaz35


Hi,

I downloaded and installed Windows8 RP a few days ago in one of my friends PC. (Intel i3 processor with 6 GB RAM). It installed without any problem but when I setup up internet connection (wired broadband) it crashed and restarted showing some error which couldnt be read. When i tried to diognosis the problem it shows 'Ethernet does not have a valid IP configuration' message!
What should I do now? Plz help. Thanks in advance.

Riaz



I am seeing the same issue,
I have a Intel PCI NIC and asus Z77 motherboard with onboard NIC, both are the seeing the same issue for last couple of days, I tried disabling/enabling NIC(s), updating drivers and hard reboot of my switch and router and cable modem, but no luck so far.

6 more replies
Answer Match 57.54%

This is my first time posting. I am on Windows 10 64 bit professional. I was trying to add RAM to my pc a couple of days ago when I suddenly lost my connection to the internet. My computer is connected to the router via Ethernet and has worked fine for years. My laptop still connects to the internet via the router. The troubleshooter says I do not have a valid IP address. I have uninstalled the network adapter driver and then searched for hardware changes, which reinstalled it, and that did not work. I've tried the cmd run ipconfig /all and that just flashed something on screen that disappeared instantly. Not sure what else you might need to know about my situation, but please ask anything you need to in order to help me find a solution. Oh, and when this first happened I called my ISP to see if they could help me, and all the young guy could think of is that my NIC card might need a driver update and he told me to call Microsoft. Any thoughts or suggestions are all appreciated! Thank you.

A:Ethernet does not have a valid IP Configuration

itsreallyCheryl,   to Bleeping Computer Forums!
 
What you may want to do is first, download the most recent Ethernet driver that did work from your OEM, Realtek, or where ever you obtained it from. It could be that the OEM has updated Windows 10 drivers for your make/model of computer. If so, get the Ethernet driver from there for best compatibility. 
 
Then using the Device Manager, uninstall that device, being sure to check the box that says 'Delete the software for this device' & reboot. Now, install the package that you downloaded, if needed, can install in 8.1 compatibility mode (this option is under Properties). 
 
To help us serve you better, would you please post a Speccy snapshot of your computer's specs? We won't see the same personal information that you do, such as your Windows COA or IP address, these are filled with random data to protect your privacy. Here's the instructions, which will help if you provide the information.  
 
Go to Piriform's website, and click the big  button.
 
Next, click Download from Piriform.com (the FileHippo link requires an extra click). Or if you want to use a portable version of Speccy (which doesn't require installation), click thebuilds page link and download the portable version.
 
You will now be asked where you want to save the file. The best place to put it is the Desktop, as it will be easy to find later.
 
After the file fini... Read more

89 more replies
Answer Match 57.54%

My computer wouldn't wake from sleep mode a few days ago so I hard rebooted it. When it booted I no longer had internet access.

My local area connection was listed as an unidentified network with no network access. I used the troubleshoot tool on the connection and it returned "the router does not have a valid IP configuration". I could not change the network from public to home/private.

I am able to connect to the internet using the same router and cable on this laptop. The wireless is also working fine.

I have tried:
disabling and enabling the network adaptor, DHCP and the local connection
updating the network card drivers
disabling ipv6 in local connection
Resetting the router to factory settings
I disabling bonjour (I do not have and have never installed mcafee)
clearing the TCP/IP stack with netsh int ip reset
using ipconfig /release /flushdns /renew
system restoring to before the issue occurred
doing a clean install of windows (it saved my old files under windows.old - I assume this is still a clean install)

I am running windows 7 home premium 64, my network card is an Intel 82567LF-2 Gigabit, the router is a Thomson TG782T and I am using Bigpond ADSL2+.

It's been a couple of days and I'm well out of my depth. I didn't expect the issue to continue after a clean install. Any help would be really appreciated. Attached is the ipconfig I get. Attachment 288972

A:Router does not have a valid IP configuration

If you could attach your ipconfig please because I can't see it

This can help us determine possible causes

Josh

9 more replies
Answer Match 57.54%

Hi guys,

I am running Windows 10 demo version.

I have problems connecting to the net. I am shown the error along the lines of "Ethernet does not have a valid IP configuration".

From command prompt I run "ipconfig/all" and here is the console's output:

When I run "ipconfig/renew" it fell through:

I should add, I have no problems on Windows Vista however.

Any ideas?

A:Ethernet does not have a valid IP configuration

There is an issue with your network adapter (probably the device driver or messed up network settings). If Windows cannot get an IP address from the network, this is the IP it assigns itself. Check Device Manager, or re-install your network settings.

0 more replies
Answer Match 57.54%

The wireless internet on my HP laptop randomly stopped working. It says that I'm connected but pages won't load. When I diagnosed correction problems, it said "The network adapter "Wireless Network Connection" does not have a valid IP configuration." None of the solutions Windows Diagnostics provided fixed the problem. My mom's laptop is connected to the same wireless router (we have ATT U-verse) and is working fine.
 

A:Solved: No Valid IP Configuration

Can you connect successfully by ethernet?

Please show ...

Start, Run, CMD, OK to open a command prompt:
(For Vista type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

2 more replies
Answer Match 57.54%

Hi, am using HP pavilion 15 Notebook PC (15-e000se) and i find it very difficult to connect it to the internet using the hotspot of my mobile phone (blackberry Q5). I can connect and browse freely using the Bluetooth tethering but not the hotspot. I tried trouble shooting it but it brought out these likely problems; 'wifi dosent have a valid IP configuration', 'Problems with wireless adapters or access point' or 'Ethernet cable missing or damaged'. Please help me, its really frustrating for two years now. Thanks.

More replies
Answer Match 57.54%

Hi guys,

I am running Windows 10 demo version.

I have problems connecting to the net. I am shown the error along the lines of "Ethernet does not have a valid IP configuration".

From command prompt I run "ipconfig/all" and here is the console's output:

When I run "ipconfig/renew" it fell through:

I should add, I have no problems on Windows Vista however.

Any ideas?

A:Ethernet does not have a valid IP configuration

There is an issue with your network adapter (probably the device driver or messed up network settings). If Windows cannot get an IP address from the network, this is the IP it assigns itself. Check Device Manager, or re-install your network settings.

more replies
Answer Match 57.54%

Hi, am using HP pavilion 15 Notebook PC (15-e000se) and i find it very difficult to connect it to the internet using the hotspot of my mobile phone (blackberry Q5). I can connect and browse freely using the Bluetooth tethering but not the hotspot. I tried trouble shooting it but it brought out these likely problems; 'wifi dosent have a valid IP configuration', 'Problems with wireless adapters or access point' or 'Ethernet cable missing or damaged'. Please help me, its really frustrating for two years now. Thanks.

More replies
Answer Match 57.12%

I get dissconnected from internet every hour atleast,please help me fix this.

A:Local Area Connection doesnt have a valid IP

Welcome to Seven Forums,

You might want to start of updating your ethernet driver.

What is your signed up bandwidth (speed)? Are you sharing your broadband connection with others? Would you happen to know if they are also experiencing a similar issue?

1 more replies
Answer Match 57.12%

Hi

I am based in Ghana and recently signed up to a new internet provider out here which use satellites via a modem. It had worked fine untill i updated my computer to windows 8 and now it will not work. it just keeps saying " Ethernet doesn't have a valid IP configuration".
i have spoken to the company and they say it should be working fine as from there end i should be able to connect and have access to the internet. they guided me through some troubleshooting options but it still wont work so it looks like it is a problem with the software that's stopping it from working as it works on my partners laptop no problem. the company provider have said windows 8 is compatible with the modem.
any ideas would be much appreciative as out of ideas myself. I am quite computer savy but not very good when it comes to more deeper problems with errors like that.

thank You

danielle
 

A:ethernet doesnt have a valid ip configaration windows 8

7 more replies
Answer Match 56.7%

I've been working on this for over two hours now. I have wifi on laptop. In Windows 10 I can't access internet on PC with Ethernet. On the same computer I have a Linux Mint partition and ethernet connection is fine there 160Mbps. I've unplugged (several times) modem and router. I've disabled and reenabled ethernet. I've turned off the PC and restarted. I've done all the Ipconfig commands, however "release" doesn't work as there is no media detected. About two weeks ago my ISP upgraded their modem to a 150Mbps. Since then I have been using Linux so this is the first time I've booted to W10. It worked fine before. Right now I'm waiting for a tech sevice call back from my provider to see if they can sort it out; thought I'd try here also.
TIA, Allan

More replies
Answer Match 56.7%

Please help

After working happily for some time both PCs in house can't access iNet via LAN. Message says Router has no IP address and this is confirmed when I IPCONFIG/ALL in dos prompt.

Originally I assumed it might be a conflict between the win 7 machine and the one running Vista. So I upgraded nasty Vista machine to Windows 7.

Bizarely the wreless on the router has always worked and my worl Win 7 laptop runs happily as do various wifi smart phones, Xboxes and tablets in the house. Also working from cable both XBox360 and sky box downstairs.

Set up is
Living Room: Cable in to Router/ModemTechnicolor TG5812N Pro then Cat 5 to Xbox and Sky+ Tv Box. Cat 5 cable to TPLINK 200MBPS Plug.

Kitchen/Diner: TPLINK 200MBPS Plug cable to Win 7 Dell PC.

Upstairs: TPLINK 200MBPS Plug cable to other Win 7 PC.

-----
Other cables and router to outbuildings via TPLINK 200MBPS Plug and cables currently disabled

Using Windows Diagnostics trys to fix but says "305 Network doesn't have a valid IP configuration."
I can ping IP from laptop but not from PC.
I have tried IPCONIG/RENEW

Stopped and restarted DHCP Client in services.

Out of ideas. HELPPLEASE
 

A:Network doesn't have a valid IP configuration

Have you tried power cycling the modem/router combo plus all TP-Link devices.
First with everything unplugged for at least 30 seconds, start by powering up the modem/router first giving it a few minutes to boot up, then plugging in the TP-Link devices.
What is the model of the TP-Link? TP-PA210 or 211
Can you post the ipconfig /all in this thread.
 

2 more replies
Answer Match 56.7%

For the last few years, my Internet has been a thing of insane annoyance.
It will be working just fine for hours, days, even weeks at a time then suddenly it only has limited access due to some problem with the IP configuration.
The usual 'dance' as I've taken to calling it goes something like this.

Limited Internet access.
Disconnect.
Reconnect.
Limited access still.
Diagnose. (even though by now I know what it's problem will be.)
Cant assign an IP address.
Try again.
Still can't do it.
Disconnect.
Reconnect.
Nope. Still dead.
Unplug router.
Plug router back in.
Still dead.
Reboot computer 4 times in a row.
aaah there we go!
Work online for 15 minutes.
Limited Internet access.
Beat head on desk.

Sometimes it will come back up at any time during the dance, other times it will be down for days for no apparent reason, reducing me to a writing pile of frustrated agony. I've tried many tricks and updates and hints but they are -all- only temporary. They will work for a bit then the whole thing will start over again.

Is there something I can do to stop this from happening? Do I need to buy a new router or something? I've tried calling my Internet provider to see if they know something about the router I don't but I almost always get someone with such a rich east Indian accent that not only cant they not understand me but I can't make out anything they're saying either so I just gave up calling them for anything.
I'm so ... Read more

A:Near constant 'No Valid IP Configuration' messages

8 more replies
Answer Match 56.7%

I have a 2 week old Windows 8 Gateway PC that is wired to the internet through the Ethernet card and I have a wireless router connected too for my laptop and tablet.  It's been working perfect for 2 weeks and so has my wireless on my laptop and tablet. Today I moved some things in the room and had to unplug everything. I put it all back the same and now only my wireless works on my laptop and tablet. The PC is showing limited access and when I run the diagnostics it says "Ethernet doesn't have a valid IP configuration" error message.
I have unplugged the wireless and connected the cable modem directly to the PC and it works fine. As soon as I route it through the wireless router it fails. Please I don't understand how I unplugged everything for only a few hours and then reconnected it exactly the same and now it doesn't work. I tried all 4 ports on the router, still nothing, I reset the TCI/IP, renewed the DNS, flushed the DNS, did a handstand, shook hands with a bear, ( so obviously I have done all the basics and more) I changed cords between router and cable, even so how come my wireless still works fine? There is nothing wrong with the antivirus, I don't have any viruses or malware, the computer hardly gets used, but today it won't suddenly work. Please, any suggestions. Thank you.

A:Ethernet can't connect to a valid IP configuration

Petal1635 to Bleeping Computer! Have you tried reinstalling the wireless adapter driver?With a working internet connection and usb flash drive, download and transfer the program and logs on your next reply. Download MiniToolBox and open/run the program.When open, checkmark or select all options then click Go.A notepad will open then copy-paste the report on your next reply. Make sure the wireless is on before running Minitoolbox.

4 more replies
Answer Match 56.7%

Help I'm pulling my hair out!!!!

Got a new computer for Xmas (Dell Inspiron 560) with the all shining windows 7. However, It keeps being disconnected from the internet reporting message reads local Area Connection Doesn't have a valid IP address configuration. It does not have a Wlan built in so is connected to my router (Orange) via an ethernet cable which is working fine as used on my last computer.
When I troubleshoot and switch off the router for 30 seconds then start is up again it works and I am on line again. However, I am having to do this 3 or 4 times a day which doesn't sound right to me.
I was hoping someone on here would be able to help to solve this problem.
 

A:No Valid IP Configuration, internet conection

16 more replies
Answer Match 56.7%

I turned on my Lenovo laptop today after not having used it for about a week. It proceeded to do over 38,000 updates. I have no idea what they were all about. But when I finally logged in I was not able to connect to the Internet although I had an excellent connection to my router. Both my iPhone and my iPad are successfully connected to the same router right not so I don't think there is an issue with my router itself. I've tried all the suggestions I've seen in this venue and in others but nothing works. Can someone please help! There was also a message about an IP address conflict - that there was another device with the same IP address. I have no idea what this means or how to resolve it.

A:Connection doesn't have valid IP configuration

Wow, 38,000 updates? Were these from MS or Lenovo? I'm guessing here but I'd wager that most were from Lenovo and are really just silly updates that allow them to track you around the internet so they can target you for certain ads...

The IP address conflict isn't much of a problem, all it means is that there are two or more devices that have been assigned the same IP. The fact you get the warning tells us that you are connected to the router.

If you're connected by wire: Click 'Start', type in CMD. A window will open on the desktop. Type in 'ipconfig /release' without the quotes and with a space between. Then type 'ipconfig /renew'. Then check your internet connection.

14 more replies
Answer Match 56.7%

I have instaled Windows 7 Ultimate 32bit on my new computer. (Dual boot with XP). On my old computer there was installed XP... so the problem is:
When i tryed to share Internet connection Windows 7 gave me an error:
"Local Area Connection" doesn't have a valid IP configuration
but files were shared and i could transfer files from one computer to the other... (only Internet didnt work)...
So i got back to win XP and tried to share connection ( XP vs XP ) and it worked great...
Then i thought: maybe windows 7 and windows XP cant share internet connection... and i installed windows 7 on the old computer (win7 vs win7)...
But then both computers came up with the same error ("Local Area Connection" doesn't have a valid IP configuration).

I tried winXP on the new comp and windows 7 on the old... and it worked great!!!
I figured out thet something is wrong with windows 7 on my new computer and i did a clean installation 3 times and the same error came up...

I tried all this things and nothing worked:

1)Disable/enable NIC
2)Install latest drivers for my NIC
3)Roll back the drivers
4)cmd -> ipconfig /refresh /release
5)Disabled ip v6
6) netsh winsock reset catalog
7)tried to manually enter IP
8)tried automatic IP
9)disabled Firewall
10)Bonjour is not instaled on my windows

I really dont know what else to do so somebody PLZ HELP!!!!

CPU: Intel Core2Duo E8400 (3.00 GHz) Motherboard: Asus P5Q SE Memory: 2GB Kingston DDR2 Graphics... Read more

A:LAN doesn't have a valid IP configuration! (ICS prob.)

Not advisable to be posting that .txt online. It has your specific hardware info in it that can be abused by hackers. Especially because you connect directly to internet.

Try setting up static ip addresses for your machines and disable the mode/router's DHCP server.

Edit hosts file for each machine accordingly.

9 more replies
Answer Match 56.7%

Hi guys,

This is my first post - and I am a beginner level user. Sorry I could not run the TSG SysInfo utility as I am posting this from work - not from my home laptop which has this issue.

I am running Windows Vista Home Premium 32 and I have a Sitcom 300N Wireless Gigabyte router. I have an HP dv2600 series laptop. I always run windows update and so you could assume I have all of the most recent service packs etc.

I recently purchased a new VPN and downloaded the associated application. The VPN runs on Open VPN protocol and installs a driver for the Tap Win32 V9 adapter which I assume it uses to connect to the VPN server. In the Networking & Sharing Centre, this new connection shows up as Local Area Connection 2.

When I run the VPN application, everything happens as it is supposed to. The application system tray icon turns bright green and when I hover my mouse over it , the label indicates the VPN is connected. I am able to access blocked websites (e.g. skype successfully) and if I visit "whats my ip" or the like, It indicates a different IP and location to my real one.

There is an indication though of a problem which my VPN support has not been able to address and is causing me to worry a little.

When the VPN is connected and I hover my mouse over the network connection status icon in my system tray, the status of the VPN connection access is "Local Only".

Speed tests show that the download speed of the VPN connection is very slow relati... Read more

A:Network adapter does not have a valid Ip Configuration

sorry this is not something we can help with
you are trying to bypass restrictiosn that your ISP or the country you are in has put on you. While we sympathize with you, we cannot offer any assistance in bypassing legitimate restrictions

Circumventing Company/School/Parental or Other Restrictions - Because we are unable to verify the actual situation or intent, no assistance will be provided to those trying to circumvent Internet filters or similar restrictions and any such threads will be closed.Click to expand...

http://www.techguy.org/rules.html
Closed

all I will say is that in general using a VPN creates an encrypted connnection between your computer & the VPN end point ( server) so all traffic goes via that encrypted connection.

Windows only sees the connection between your computer & the VPN local server on your computer
 

1 more replies
Answer Match 56.7%

I have a Dell Intel Pentium Desktop and a Toshiba laptop running Windows 7; the router is a Netgear RangeMax Wireless-N 150. Until 8/17/11 I was able to make wireless/wired connection with my laptop, I can make connection with desktop with no problem. When I run troubleshooter I'm informed that "Wireless doesn't have a valid ip configuration", or "connection between router access point, router cable, internet modem broken". Connection also defaults to "Unidentified network" instead of my home network. I have reset my laptop, desktop, cable modem, router; device manager informs me that all hardware is working properly also, I updated firmware, and verified the most recent drivers installed. Connection has been setup since July 2010 and I have experienced no problem up until now. If someone could assist me and help to to fix this problem I would really appreciate it

A:Wireless doesn't have valid ip configuration

Welcome to the forum taradenise!

Sorry to hear you are having problems!

It is obvious from this image that you are not connecting to the router at all... the IP showing is an autoconfig IP starting with 169.254.xxx.xxx. So, your issue is probably with the router.

Since all was working fine earlier, I am willing to bet that on or around 8/17/11 you had power outtage, you unplugged, or moved your router. ???

If unplugged for a period of time, many routers will reset to factory defaults.

If you send me the same image from the desktop, along with the model and make of your router, I should be able to help you get this back up easily!

9 more replies
Answer Match 56.7%

I'm having an issue with ipconfig /release

I have uploaded a screenshot with the error I am getting, any help appreciated

A:Ethernet doesn't have a valid IP configuration

Ipconfig /release, only drops the connection. It has nothing else to do with networking. Really need more information. What ISP do you have? What router or Gateway are you using? It appears from your screenshot that you are able to connect to the Gateway/Router. So what is your real problem? Not able to go to any websites? Is the connection dropping on the Router/Gateway, or at the ISP side.

1 more replies
Answer Match 56.7%

Please help, I have watched almost all YouTube tutorials and read all forum post about this issue but mine is still not fixed! I just installed Windows 8.1 but the Ethernet says "unidentified network" and "limited". When I troubleshoot, it says my Ethernet doesn't have a valid IP config. The Ethernet works on my other laptop but not on this desktop!

Please help! I spent 1k$ on this computer...

A:Ethernet Doesn't have a valid IP configuration

Please someone help me

19 more replies
Answer Match 56.7%

Hello all!

I've had this problem since I bought a new desktop PC with windows 7 installed. Every once in a while my internet stops working (router+modem) and a yellow exclamation mark appears. When I use the windows solution utility I get two different messages:

a)either my wireless network connection does not have a valid IP

b) the default gateway is not available

I am using d-link dwa-127 wireless adapter since my computer does not have an integrated wifi card, and I have already removed norton, which could possibly be blocking my conncection. I have tried setting my IP manually, but it does not work.

At the beginning it all functioned normally, and even now it works, but it did not before. I also noticed that when it does not work it says 'Unidentified network', and when it does it says 'Smuc' (the ssid of our network).
The internet as such is working this whole time, I always check it on my laptop with windows XP and an integrated WiFi card.

How could I solve this problem and keep my internet connection stable?

A:Wireless network does not have a valid IP configuration

If you can post a screen shot of your ipconfig/all it will help me to diagnose the problem for you.

9 more replies
Answer Match 56.7%

Hello,

I'm about 4 hours deep into trying to fix this. I've followed several forum posts with similar issues, with no luck.

I've been running windows 10 on my PC with my current hardware (including modem/router) for about a year now with no issues. Yesterday I booted up and had no internet access. The error was something to do with "sockets". I ran the netsh socket reset command, which simply changed the error to my current invalid IP configuration error.

So here's my current state:

I'm typing this from a laptop I dug out of storage. On this laptop I have internet access both through ethernet and the on-board wifi adapter.

On my PC, the ethernet connection is through my motherboard (adapter: Interl Ethernet Connection I218-V), and I have a separate wifi card (adapter: Qualcomm Atheros AR938x). Whether connected with ethernet or wifi, the connection status is:

IPv4 Connectivity: No Network Access
IPv6 Connectivity: No Internet Access

All items in the properties list are checked, including the IPV4/IPv6 items. I've tried uninstalling/reinstalling both the ethernet and wifi adapters. I'm reinstalling from the latest Intel driver installer (PROWinx64).

I've tried the various netconfig commands. If I call "ipconfig /release" I get:

"An error occurred while releasing interface Ethernet 2: An address has not yet been associated with the network endpoint".

Here is my ipconfig /all

I've tried a dozen other things, but I don't want to convo... Read more

More replies
Answer Match 56.7%

I've been using my netbook to get online for some time. However, recently my dad needed to reboot our modem several times because he was encountering problems with his laptop. This got the wireless working for a little while, but the need came to restart the modem again, so he did. Unfortunately, this put the wireless on the modem out of action. Originally, my laptop wouldn't even recognize the network's existence, but after a 3-hour-long tech support call to AT&T, our internet service provider, I finally got my laptop to recognize the network. Although the tech support lady was very helpful, and walked me through doing numerous things to both the laptop and modem, my laptop still will not connect fully to the network. By "will not connect fully" I mean that it gives me an error message, saying "connection unsuccessful", and on the list of networks, listed next to my network it says "Limited Access". I've attempted to troubleshoot the problem multiple times, and so far the only thing that comes up is the message "Windows cannot connect to [name of my network]", and something saying I don't have a valid IP configuration. I have full access to the modem's configuration as well, and I've checked the firmware and other things to see if there is a problem with the modem. After numerous tests and diagnostics, nothing seems to come up that says there is anything wrong with the modem, but the limited access problem still occurs for my Dad's... Read more

A:Limited Connectivity / Does not have a valid IP configuration

I'm not absolutely sure but I think I might have an idea as to the problem. I'm assuming your modem also functions as a router being you mentioned you connect to it through wireless, this being the case it must also function as the DHCP server for your network. If the computers attempting to connect to the network are not set up to use DHCP, or the modem itself is not set up to act as a DHCP server, that could be causing the IP configuration error.

5 more replies
Answer Match 56.7%

Please help, I have watched almost all YouTube tutorials and read all forum post about this issue but mine is still not fixed! I just installed Windows 8.1 but the Ethernet says "unidentified network" and "limited". When I troubleshoot, it says my Ethernet doesn't have a valid IP config. The Ethernet works on my other laptop but not on this desktop!

Please help! I spent 1k$ on this computer...

A:Ethernet Doesn't have a valid IP configuration

Please someone help me

19 more replies
Answer Match 56.7%

I know this question seems to come out a lot but I can't seem to fix it. I am a college student and my internet has worked 100% fine until I went home this weekend and came back. It worked this weekend when I brought my computer home and when I came back today it gives me this error when I try to troubleshoot. The only thing that could have changed is when I went home I set my DNS to be openDNS because it makes a huge difference there, but I changed it back when I got here. I don't know if that would matter, but unplugging and restarting are doing nothing.

Any thoughts on how I can get my network to work?

Edit: It may be worth noting that I am running a free version of AVG and all of my windows firewalls are disabled. I am running some software the school makes us install but it has never been a problem for over a month.
 

A:Windows 7: Lan doesn't have a valid IP configuration.

Hello trinric
I would first get rid of AVG free. It used to be a good program but I have had to delete it in order to fix a lot of computers this past year. In some computers that was the only problem. Once deleted the computer worked fine. Also you should never be without a firewall. With that said What browser are you using?
 

3 more replies
Answer Match 56.7%

Hi all, what does it mean? I'm using Connectify Pro and sent a support request ticket, meanwhile two weeks later and still no response.
Connectify says it is running, sharing local connection, on 192.168.37.1 I've tried adding that ip to the router and it says it's illegal.
I have a wired adsl modem, and an atheros wifi card which has sharing enabled. OS is W7. Hopefully someone can work out what is going on. Attached screenshots. TIA.

A:Ad-hoc Network - No valid downstream NAT configuration

I'm no expert on networking, but I'll post this link in the hope it may help you.

Create Wireless Ad Hoc Network in Windows7 to Share Internet

2 more replies
Answer Match 56.7%

When installing the upgraded zonezlarm free, I get this message.
no valid installation configuration found.
Can any one help?
I even uninstalled the old free zonealrm firewall and still the same message.

A:no valid installation configuration found

Are you sure the upgrade you are installing is the same version/type as the one you have already?

4 more replies
Answer Match 56.7%

So... I just updated from win 7 to win 10, as I got it for free. All went smoothly, but there was no ethernet connection. I'm running a custom built pc, connected to my router via ethernet cable.

At first windows detected the cable, but said: ''Ethernet doesn't have a valid IP configuration." I was on about around the settings, and deleted the ethernet network from windows' settings. I thought it would come back by just re-plugging the cable. This didn't happen. What happened was, that the whole 'Ethernet' tab disappeared from the 'Network & internet' menu!

I also don't have 'Wi-fi' or 'Airplane mode' tabs in the menu... Well I have a pc that doesn't have support for wifi so that might be why...

Does anyone have a clue on how to get win 10 to detect the ethernet cable, and maybe that way bring back the 'ethernet' tab?

Oh, and I tested the ethernet cable on my laptop (running win 7), and it worked fine.
Thanks in advance!

A:Ethernet doesn't have a valid IP configuration

have you tried disabling and enabling the ethernet from device manager?

7 more replies
Answer Match 56.7%

I've had my modem connected straight to my computer via ethernet cable and never really had any problems. I recently downloaded itunes to listen music on my ipod and i know this probably isn't the problem but weeks later i was prompted to download an update for itunes and of course I clicked restart after update but start up computer and internet did not work. It was this "Ethernet doesn't have a valid IP configuration." I've tried resetting the modem and nothing. It is worth noting that I reformatted to see if it would fix it but nothing. but once i connect my modem directly to my laptop it works perfectly fine. I also including attachments so i could possibly be better assisted. Also worth noting my motherboard is a Asus crosshair formula IV which unfortunately doesn't have updated windows 8 drivers but never gave me problems before. the ipconfig with black background is the laptop ipconfig.

A:Ethernet doesn't have a valid IP configuration

Uninstall Bonjour service. Reboot.

Let us know if you need some commands to run after that to fix Winsock. Probably not.

6 more replies
Answer Match 56.7%

Hello,

I have a brand new PC workstation.

Everything was fine, until recently, when I turn on my PC, I don't get an immediate internet connection. This is happening nearly everytime now with some frequency.

I reset the router/modem and everything is fine after that, so all is good.

But it is still frustrating. I get, "Ethernet doesn't have a valid IP configuration".

I googled this and it appears I am certainly not alone.

The following to assist you are screenshots of my 'ipconfig' and 'Network Connection Status' before (unsuccessful) and after (successful) internet access:



You will see from the above that there is certainly something different with the data...

I'm sure it is something so simple.
____________________________________________

Incidentally, I did find a nice youtube 'tutorial' in relation to this subject title about manually configurating the settings:

http://www.youtube.com/watch?v=onXsKTAxYtk

I haven't tried this yet and that is probably down to the fact that I can't find my alternate DNS server setting (the very last box to fill in - watch the video and you will know what I mean) ???

Many thanks for reading, please help me.
 

A:Ethernet doesn't have a valid IP configuration

9 more replies
Answer Match 56.7%

Hello all. Last year I installed Windows 8 on a hand-me-down desktop computer my brother gave me. It previously had Vista on it. The installation went perfectly fine, and I had no issues with any functionality. Then, randomly some months ago my network driver (I believe that was the issue, although I am still unsure) decided to conk out and no longer connect to the internet, via ethernet or not. I just bought an 802.IN USB wireless adaptor, and it isn't working either. The error I get is "Wi-Fi 3" doesn't have a valid IP configuration.

I've tried fixing this error in many ways, including attempting to set a static IP address, doing the whole netsh int ipv4 reset reset.log, netsh int ipv6 reset reset.log, and etc. The netsh ip reset commands are not working, and give me an "access denied" error. Here is some info from my ipconfig/all settings:

Windows IP Configuration

Host name: Kyle_Desktop
Primary Dns Suffix:
Node Type: Mixed
IP Routing Enabled: No
WINS Proxy Enabled: No

Wireless LAN adapter Wi-Fi 3:

Connection-specific DNS Suffix:
Description: 802.11n USB Wireless LAN Card
Physical Address: 00-0F-54-12-B9-50
DHCP Enabled: Yes
Autoconfiguration Enabled: Yes
Link-local IPv6 Address: fe80::5f7:c8c7:294e:c406%25<Preferred>
Autoconfiguration IPv4 Address: 169.254.196.6<Preferred>
Subnet Mask: 255.255.0.0
Default Gateway:
DHCPv6 IAID: 419434324
DHCPv6 Client DUID: 00-01-00-01-18-22-08-E1-00-1E-90-01-8A-CB

DNS Serve... Read more

A:Computer does not assign valid IP configuration

Your IP Config log shows that your Default Gateway (your router) is not showing an IP address. So it's not connected to your router.
Try connecting to your router by Ethernet cable and do another ipconfig /all command and copy all of the text and paste it in your next post

6 more replies
Answer Match 56.7%

I have an HP p6616 desktop that came with a Realtek PCIe FE Family Ethernet adapter that cannot exceed a speed of 10 Mbps. After working with an HP customer support rep, he concluded that I had a bad set of chips. I purchased another Ethernet adapter, Realtek PCIe GBE Family, and I cannot get it to connect to the internet. Troubleshooting continually gives the ?Invalid IP Configuration? message. I tried the new adapter on another Windows 7 computer and it worked beautifully. I have tried many of the suggestions on this forum, but nothing has solved the problem, it is still getting an IPv4 address of 169.254.x.x.

ipconfig /all is attached below. In this case, the new adapter with the invalid IP configuration is ?Local Area Connection?, and the old adapter is ?Local Area Connection 2?.
Screen.pdf

A:Cannot get a valid IP configuration with new Ethernet adapter

Not sure if you have tried this or not and it may sound kinda obvious; but; have you tried the ipconfig /renew? Also; you could also try updating the drivers via the link below:

http://www.realtek.com.tw/downloads/...&GetDown=false

2 more replies
Answer Match 56.7%

Hi,

Yesterday my windows 10 laptop stopped connecting to the internet. I have tried many fixes so far but haven't been able to come up with a solution.

Internet troubleshooting shows: "Wi-Fi doesn't have a valid IP configuration"
Internet connection displays: No Internet, secured
Internet is also working fine on other devices.
I have tried netsh winsock reset and checked that IP is being obtained automatically.

I am also attaching the troubleshooting report. Any help is appreciated been trying to fix this for a while.

Thanks in advance

A:Windows Wi-Fi doesn't have a valid IP configuration

What happens if you do an ipconfig

The command below will copy ipconfig output to the clipboard, after running it just paste the results into your post

Code:
ipconfig | clip

0 more replies
Answer Match 56.7%

Hello everyone, so i have this problem that is listed ar the Title (error i get after troubleshooting). As i was using win8 it was just fine, after i have upgraded to 8.1 i keep getting this error as i plug in a direct connection it says unidentified network limited or ehternet limited.
 

A:Ethernet doesn't have a valid IP configuration

16 more replies
Answer Match 56.7%

Hey guys, little problem here. I just bought my wife a new laptop with Windows 7 on it. When I first got a hold of it, I proceeded to remove all the HP bloatware that was installed. I went to Add/Remove programs and uninstalled everything that had HP beside it.

Next, I tried to have the laptop connect to my wireless router (DLINK DI-524). It found my network, but only with limited connectivity. I ran the troubleshooter and it reported back that the wireless network connection doesn't have a valid IP configuration.

I then connected my internet cable directly to the laptop and I get the same message, except it says "local area connection .......".

I have tried uninstalling/reinstalling the network adapter, but to no avail. Any other suggestions from you guys? I know it's probably something glaringly obvious that I am just overlooking...

Quick facts
1. Internet works on my desktop.
2. Desktop has Windows Vista.
3. Internet will not connect on laptop directly or through router.
4. I have reset/rolled back/reinstalled/uninstalled everything network card related.
5. At first I uninstalled all HP bloatware on laptop

A:Connection doesn't have a valid IP configuration.

You could always try using a static IP address

Firstly Open "control panel" click on "network and sharing center"

Click on "local area connection (1)" then follow the image clicking through to (5)
Once at 5 enter your IP address .... this will depend on what address your network is running on (I'm hoping that you know this already) I've given an example. If you router is set to eg 192.168.0.1 then you will need to enter this into the "default gateway" and "preferred DNS (6)" (I've marked the last number with an "X" as this could differ) When you enter your IP address just change the last number to anything between say 10 - 20 eg. 192.168.0.10

Do the same for your Wireless connection but change the 10 to maybe 11 ( eg 192.168.0.11)

9 more replies
Answer Match 56.7%

I have been having this problem intermittently for some time. I can be connected at home to my wireless network fine and then something happens and i get 'wireless doesn't have a valid IP configuration'. Sometimes if i plug into the network (wired) the wireless will be fine again and sometimes (like now) not. I've tried disabling bonjour, 0ing the dhcpbroadcastflag, disabling the ipv6, resetting the adapter, rebooting, etc etc etc.
Here's the text of my ipconfig:

Windows IP Configuration

Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : hsd1.co.comcast.net.
Link-local IPv6 Address . . . . . : fe80::e4b1:7869:2645:dcdc%12
IPv4 Address. . . . . . . . . . . : 192.168.0.9
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1

Wireless LAN adapter Wireless:

Connection-specific DNS Suffix . :
Autoconfiguration IPv4 Address. . : 169.254.82.105
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :

Tunnel adapter isatap.hsd1.co.comcast.net.:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : hsd1.co.comcast.net.

Tunnel adapter 6TO4 Adapter:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter isatap... Read more

A:Wireless doesn't have a valid IP configuration

No DNS IP. Your home network isn't talking to your ISP.

Please provide info on how you have setup your home network.

9 more replies
Answer Match 56.7%

Please help, I have watched almost all YouTube tutorials and read all forum post about this issue but mine is still not fixed! I just installed Windows 8.1 but the Ethernet says "unidentified network" and "limited". When I troubleshoot, it says my Ethernet doesn't have a valid IP config. The Ethernet works on my other laptop but not on this desktop!

Please help! I spent 1k$ on this computer...

A:Ethernet Doesn't have a valid IP configuration

Please someone help me

19 more replies
Answer Match 56.7%

Hello,
 
as the title says, thats my problem. My LAC has 169.255.x.x IP address, and no matter what I do it doesnt get fixed.
 
I've tried;
 
Enabling DHCP
Using static IP address.
Re-installing drivers, installing the latest drivers
Disabling IPv6
Draining the static power from the computer by pressing 'ON' button when the system is offline.
Re-installing Windows 7(lol :D )
Trying the commands like; I've tried nearly all commands and none of them worked.
> ipconifg /release and /renew it gives me some error like; Error occurred while release interface Loopback Pseudo-interface1: The system cannot find the file specified. 
> netsh int ip reset resetlog.txt doesn't fix this as well.
> Some people told me to enable DHCP, its enabled lol, when I use 'Use the following address' the DHCP gets disabled.
 
So, I made up my mind, to see if the LAN card is dead, but when I booted Ubuntu, my internet is working. No issues thus far. But I am a Windows user, and am not ready to use Ubuntu.
 
Here's my ipconfig /all

Spoiler

Microsoft Windows [Version 6.1.7601]
Copyright © 2009 Microsoft Corporation.  All rights reserved.
 
C:\Users\Nani>ipconfig /all
 
Windows IP Configuration
 
   Host Name . . . . . . . . . . . . : Nani-PC
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy ... Read more

A:Local Area Connection doesnt have a valid IP address.

Hi ,
please ensure that the router or modem or whatever at the other end of your network cable is having DHCP enabled. Also make sure the IP lease is set to more than 2.
Now press start > control panel > network and sharing center > adapter properties (left hand side pane, it appears as a link) > rightclick on your lan adapter (nvidia) > properties > select Internet Protocol Version 4 (TCP/IPv4) > click Properties button > select 'Automatically obtain....' .
Apply the settings and exit.
Now check if its working.
Please post back if there is any entry already there (incl the IP and subnet mask and dns).
In the IPv6 properties, tick 'Automatically obtain....'

5 more replies
Answer Match 56.7%

what is the logic behind the iterpretation that "it has no subnets" mean...

when in reality... a 1 bit netmask.... would provice provide two networks each with 126 hosts.

example:

subnet 0 Host addresses 192.168.255.1 to 192.168.255.126

subnet 1 Host address 192.168.255.129 to 192,168.255.254

im studying subnetting and realized that tutorials leave out 1 bit netmasks.... but dont really seem to explain why.
 

A:Solved: Why doesnt microsoft consider 255.255.255.128 (class c) a valid subnet?

7 more replies
Answer Match 56.7%

OMG,
I am on a server 2012 windows. We are having issues with our Ethernet connection. Wifi is okay great connection.
But I am having issues with all the local machines that are connected to Ethernet cable.
Can some one please assist me thru this.
Server has the correct IP- we have static ip address.
We are also using sonicwall.
Thanks in advance

A:Local Area Connection doesnt have a valid IP address

Hi, We need more information in order to find the root of the problem. Are you able to ping the server via local area connection? If not are you able to ping other client machines?

Josh!

5 more replies
Answer Match 56.28%

Every time I restart my computer I get ethernet doesn't have a valid ip configuration. When I unplug my router and plug it back in it fixes the problem. This only happens on my Windows 8.1.
 

A:Solved: Ethernet doesn't have a valid ip configuration

8 more replies
Answer Match 56.28%

I desperately need help with this error I have read all the different guides on how to solve this problem and have yet to find a way to solve it it also doesn't help that I am not tech savvy. Any information would help

A:local connection doesn't have a valid ip configuration

Please provide an ipconfig /all of your computer for review:
Click on Start => in run or search box type cmd press enter (run as Admin). From the black screen, type the word ipconfig /all and press enter. Right click on the black screen or Command prompt then choose Select All and Paste the results here

6 more replies
Answer Match 56.28%

I have wired internet broadband connection .After rebooting the computer,i can not not connect to the internet .while trouble shooting the networker adapter in device manager,i got message that local area connection does not have a valid ip configuration The detailed ipconfig are given below

Windows IP Configuration

Host Name . . . . . . . . . . . . : RAM-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

PPP adapter Broadband Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadband Connection
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 117.207.51.164(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 0.0.0.0
DNS Servers . . . . . . . . . . . : 218.248.245.5
218.248.245.1
NetBIOS over Tcpip. . . . . . . . : Disabled

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
Physical Address. . . . . . . . . : 00-23-AE-D9-79-B4
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::bd07:969b:85f5:257f%10(Preferred)
A... Read more

A:local area connection does not have a valid ip configuration

rambilash, without a Gateway on your adapter settings, It won't work properly.
It looks like your dhcp server is not giving you a gw address.

Rich

1 more replies
Answer Match 56.28%

Hi Tech Guys,

after a few struggles with Windows Vista I was able to configure it, I had to roll back because of registry problems, and something odd happened.

I right clicked on the desktop > personalize> screen saver
and I got the message:

C:\Windows\sistem32\rundll32.exe is not a valid win32 application

I restarted the pc, nothing... and then I realiced most of the options throw the same error!
- Color and appearance
- Sounds
- mouse pointers
- Themes

(I'm in Argentina, the windows is in spanish so I translated the best I could)

also many options in the Control pannel are throwing similar errors (never happened before)

- Mouse
- Game devises
- keyboard

And Open with also is invalid!

HELP!

BTW I would reinstall windows... but I have so much in here I would like to know if there's a simple solution.

Thanks!
 

A:rundll32 is not a valid win32 app for the configuration of SCREENSAVER!

hello leo

try this
http://www.howtogeek.com/howto/windows-vista/verify-the-integrity-of-windows-vista-system-files/
good luck
 

1 more replies
Answer Match 56.28%

Hay I am new here cos this is bugging me

I have read soooo many forums and have got no where which is a pain.
Set up is trying to connect PC to Xbox via ethernet to bridge connection, or just trying to connect PC to laptop until I can sort this out.

Here is a 'short' list of what has been done so far:
Uninstall AVG
Assign IPV4 manually/automagically
Reset the router a billion and 1 times
Tried a different cable
Done the netsh and winsock resets
IP /release and /renew (which does not seem to work for the local ethernet)
Deleted a load of tunnel connections
Gone into services and made sure internet something sharing was automatic and started. It won't start.
Tried to do the thing where you try and set the unidentified network to a home or private network (cant remember how) but that did not work.

Probably missed 1 or 2 things out but yeah.

Here is a list of my ipconfig /all results (This is with manual IP (Was told no gateway on one of the forums but I have done it with a gateway))

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Jess the bear>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : JessthePC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection 4:

Media State . . . . . . . . . . . : Media disconnected
Conn... Read more

A:Local area connection does not have a valid ip configuration

6 more replies
Answer Match 56.28%

Hello! Today a friend of mine wanted me to download some things for her, and because her internet is extremely slow. When I turned it on and attempted to connect to my router, it said that I have no valid IP configuration. I've tried going to cmd.exe and typing in ipconfig/release then ipconfig /renew, but it only resulted in it saying: "No operation can be preformed on Local Area Connection while it has its media disconnected"
Help me out? Here's the ipconfig /all.
Thanks in advance!
-Nada

A:Local Area Connection has no valid IP configuration

Can you get it to work wired ?

4 more replies
Answer Match 56.28%

My laptop keeps showing two problems when starting up:

1. Problem with wireless adapter or access point
2. "Wireless network connection" doesn't have a valid IP configuration

I don't know what these mean or how to fix them and I need my laptop for work.

Help!

A:Wireless Connection doesn't have valid IP configuration

and welcome to the Forum

Please provide us with some output and information, see the guidelines here.

1 more replies
Answer Match 56.28%

I have a Arris TG862 Modem And Router. With Time Warner Cable Internet. Saturday When I Got Home The Wireless Said "Unidentified Network No Internet Access" I ran trouble shooter and it said windows doesn't have a valid IP configuration. I called Time Warner 4 times and told each person on the phone this and all they did was reset the modem over and over which isn't helping me. I currently using a friends wireless.. Can someone help me with this problem?

A:Arris Modem/Routeer No Valid Ip Configuration?

How did TWC have you reset the modem? Did they just have you unplug your modem from the AC outlet? Is this modem a combo modem router or do you have a separate router connected to the modem? To technically reset the router and or modem you need to push in the reset button on the back of the device. Use a paper clip and push in an hold down for 15 to 30 seconds then release.

9 more replies
Answer Match 56.28%

Where to start so to begin with my issues started when we got a new router. We had issues with the old one so we installed a new router and got it working fine WiFi worked alright but Ethernet would not connect it my computer when I ran the troubleshooter said one or more network Protocols were missing from my computer I'm running windows 10 version 1511. I went on google on my laptop to start finding a fix and I must have tried every option in the book just about I am losing my mind over how to fix this. Finally I tried reinstalling the Network drive Uninstalling my current one going on google finding my most updated one ect. and now the issue is no longer about the protocols but its saying my Ethernet doesn't have a valid IP configuration so now i'm googling how to fix that and I have had no luck at all i'm at witts end and hope someone can help me. Reply to this asking whatever you want me to copy and paste so you can have a better idea on how to help.

A:Ethernet Cable doesn't have a valid IP configuration.

Do the following:

Open a Elevated Command Prompt:

Press WIN + X to open Start context menu.
Select Command Prompt (Admin)​.

Paste the following into the Command Prompt window, exactly as shown, including double quotes:

cmd /c "ipconfig /all > postme.txt & ping yahoo.com >> postme.txt & reg query "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" | find /i "proxy" >> postme.txt & notepad postme.txt & del postme.txt"

and press ENTER.

A file will open in Notepad. Please copy and paste the contents here. Close the Notepad window and the file will be deleted and the Command Prompt window will also close. Post results in a reply here

0 more replies
Answer Match 56.28%

i installed windows 7 on my desktop pc and every time i try and connect via wifi i get that error. only way i can surf the net is through ethernet what can i do to fix this issue

here is info from cmd
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\aceves>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : aceves-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : hsd1.tx.comcast.net.
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : hsd1.tx.comcast.net.
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 1C-6F-65-72-09-DB
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::41ea:1251:b9ce:2110%13(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.101(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, July 20, 2011 4:47:36 PM
Lease Expires . . . . . . . . . . : Thursday, July 21, 2011 4:47:36 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 337407845
DHCPv6 Client DUID. . . . . . . . : 00... Read more

A:Wireless network connection does not have valid ip configuration

7 more replies