Tech Problem Aggregator

"Check Backup Disk Space" Error Windows 8.1

Q: "Check Backup Disk Space" Error Windows 8.1

Hello. I am having trouble with a message in Action Center in Windows 8.1. It is saying "Check Backup Disk Space" and I cannot hide the message. I had Windows 7 File Recovery setup with Windows 8.1, but now after the upgrade, the message is "stuck." Can this be fixed? These two links explain it perfectly:

Windows 8.1 Update - Check backup disk space - Microsoft Community

Windows 8.1, can't remove "Check backup disk space" error in action center - Ars Technica OpenForum

Please help. Thanks.

A: "Check Backup Disk Space" Error Windows 8.1

See picture:

2 more replies
Answer Match 91.5%

My wife has a two month old Lenovo ideapad with Windows 7. We are now getting alerts that the D partition is near full. Is this system taking multipul backups of the harddrive C and storing them all? What are my best options to have a safe backup, but not overloading the D partition? I do see in; Computer>System>Device Manager>Disk Drives>D Drive General tab that there are two options at the bottom.
option one, (not checked in my case) "Compress this drive to save disk space".
Option two, (checked) "Allow files on this drive to have contents indexed in addition to file properties"
Would selecting option one solve my problem? If this system is saving a snapshot of D over and over, it will only be a matter of time when option one will be overcome.
SO, I would think that there has to be a setting that will let partition D delete older backups...right?

Would it be a combination of selecting option one and changing a setting that would enable older backups to be automaticaly removed?

A:Action Center "Check backup disk space" alert

Welcome to the forum
If your D drive is made for backup's only, you can delete all files exept the newest one.
But it's advised to make backup's on an external USB drive and change the frequency of backup's to your files and olso for images to your OS.

4 more replies
Answer Match 83.4%

Hi - I keep getting the message that a backup failed due to less than 400 MB on the Windows disk. I have about 350 GB available on the disk!

Other backups have worked OK. I have seen a long thread on the Microsoft site with lots of people saying they have the same intermittent problem, but no solution. Anyone know what causes this?

I'm working Home Premium, and backup up to another hard disk on the same machine which also has lots of free space.

Thanks guys

Frances
 

A:Vista backup fails "not enough space on Windows disk"

Just a couple of simple questions, which you may have already covered.
How much space is on the C drive.(where Vista is installed)
On the 'Where do you want to save your backup' page, you are sure it is your second drive and not the 'Recovery' partition.
moper
 

2 more replies
Answer Match 108.36%

Windows Update trying to install KB2976627, continually receiving error that I do not have enough disk space remaining to install the update. My OS Drive has 75 GB Remaining. Does anybody have any idea what causes this problem and how to remedy it?

A:Windows Update error, "not enough disk space..."

Time to do a Cleanup of your system:
Windows Update Cleanup in Windows 8

4 more replies
Answer Match 100.8%

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
pc's on - booting - then "Windows Loading Files" - restart
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

A:"Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies
Answer Match 100.38%

I am attempting to transfer all of the files form an NTSF 250 GB external drive to an empty FAT32 250 GB internal drive via USB.

I keep getting an error message that says "Cannot copy (filename): There is not enough free disk space. Delete one or more files to free disk space, and then try again. To free space on the drive by deleting old or unnecessary files, click Disk Cleanup".

This is not true though, as the destination drive has more than enough space for the transfer.
 

A:False error - "not enough disk space" durring transfer

You cannot transfer all the files because many will be in use...

You will ned to make a drive image with a program like Ghost, or you can even use its drive copy feature.

It will be cake to copy an entire drive.
 

3 more replies
Answer Match 99.96%

There's not enough disk space on drive C where Nero 7.57 is installed; but, there is on drive E. I set Nero's cache folder to E:\NeroTemp and and Windows temp and tmp environment variable to E:\Temp where there is over 100 Gigs of free space and restarted the computer; but, there is no change with Nero's insufficien-disk-space error.

And, yes, I did create those folders for drive E.

What to do?
 

A:Nero aborts with "not enough disk space" error.

9 more replies
Answer Match 99.96%

I receive daily a "Low Disk Space" error message which is incorrect and in my estimation fradulent. It goes on to give an alternative to rectify this situation by offering to "Speed up your computer and remove all viruses that are on your computer." Of course all of this is for a price. If you opt in and then change your mind before you totally commit they offer the same package for half price. I refuse to be "sucked in" by this fraudulent company.

I have gone to the internet to try and find out how I may get rid of this enemy. I have used Malwarebytes, Microsoft Security Essentials and Microsofts Security fix program all to no avail. I am at my 'wits end' trying to rid my computer of this plague. This is the url that the message comes through as. I cannot find out any source that will identify its origin: http://static.salesresourcepartners.com/g/?z=1&ilmernzkvtaztu=002618B38EDC0810&pu=cGlja3VwaG9ja2V5LmNvbQ==&s=iexplore&nm=ilmernzkvtaztu&t=aHR0cDovL3d3dy5waWNrdXBob2NrZXkuY29tL2ZvcnVtL3RvcGljLmFzcD9UT1BJQ19JRD0yODIzNw==&r=1

I need help.

Thanks,

Doug. Bell
 

A:Fake "Low Disk Space" error message

16 more replies
Answer Match 97.44%

Hello everyone.

I am thinking to convert my HDDs to Windows Dynamic Disks. I would love to use software RAID (Hardware Does not support RAID) and I see to do this I need to Convert HDDs to Dynamic Disks. I have done Dynamic Disk RAID 0 in Win XP era.

I heavily rely on the inbuilt Windows Image backup to Reset the system to Fully customized and tuned state as the need be. I came to read that Image backup does not like Backing up TO A DYNAMIC DISK.
Backup Complete Computer - Create an Image Backup

However, I am curious if the Image backup can successfully backup FROM and RESTORE TO a Dynamic disk , provided that WindowsImageBackup Itself is on a basic, USB HDD?

More replies
Answer Match 97.44%

One of my users was working in Corel Word Perfect 9.0 and experience an "out of disk space" error when she tried to save her work (just a small document). She was working over our TCP/IP network using Win2000 terminal server and saving to a Linux file server. I was at the server so I was able to save the file with a different name but I can't figure why she would get that error as there is plenty of space on the Linux server. Has anyone ever seen this before? Thanks
 

A:"out of disk space" error

Just a wild guess but is there possibly a setting somewhere that may limit the amount of storage space a user can use, on a user by user basis? If so, you may just need to increase the setting for that user.
 

2 more replies
Answer Match 97.44%

Hi everyone,

I've been having this prblem for several months but recently it has been getting worse. I'm working on an Dell Optiplex gx280 windows xp professional sp2. Here is the problem, while I'm working on my computer (doesn't matter what I'm doing) I will get an error msg "low disk space" flash on my screen, then my monitor will shut off, but the power light on the computer stays on (sometimes flashing). I'd have to power it off and turn it back on and it would log in normally. This morning it happened 3 times, please help. Thank you in advance.

-jdaries-
 

A:"low disk space" error

6 more replies
Answer Match 97.02%

I first notice my notebook begins to have this issue when I tried to update my Windows. It returned me with error code "80070008", which says that my computer might have run out of memory, however, there are 200GB space available
in my C: drive, and I am only using 27~30% of my RAM out of 8GB.
I tried to perform DISM 'ScanHealth' and it returned me "Error: 8 - Not enough storage is available to process this command".
At first, I tried to ignore this issue as I thought it did not cause me any major trouble. But I was wrong. Several USB devices become unresponsive (yellow exclamation icon at Device Manager).
When I tried to manually install drivers, that's when I found out it was this STORAGE insufficiency again that cause me trouble:

"Windows found driver software for your device but encountered error while attempting to install it.  - Not enough storage is available to process this command".
Some of my programs also become incredibly laggy ever since this issue arises, yet I don't know where the problem lies. 
At Event Viewer... I noticed several error messages regarding
"Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights. - DETAIL: Not enough storage is available to process this command".
I also caught a glimpse of one error that I think stated more clearly:
"Application popup: Windows - Low On Registry Space: The system has reac... Read more

More replies
Answer Match 96.6%

Hi Everyone,

i am using CRichEditCtrl::GetLine() function to read the text from a dialog.
If my text contains any space character then it is throwing improper argument error and the application getting closed in vista only.....
What is the actual problem ????? why it is happening with vista only...?

Please suggest

More replies
Answer Match 96.18%

Here's the story. I bought this new Samsung 840 250GB SSD.
I first did a clean install of windows 7 on it and it worked fine. Windows installed without much problem and everything. Then something didn't look right about the partitions. It looked like because I had all my HDDs connected while installing windows on the SSD the windows created the system reserve on the old HDD rather than the SSD. So I went back and decided to start from scratch with all the HDDs except for the SSD disconnected. I tried reinstalling windows on it but this time it didn't work. I tried formatting the SSD and it just gave me an error saying windows couldn't install on a GPT disk. I went into bios, made sure the PC was booting from the UEFI DVD drive and it still kept giving me the same error.

So I then booted up my old HDD. I tried formatting my SSD and now I can't delete the partition!
This is what my disk set up looks like:


If I click "extend volume" on the "New Volume (G" disk, it says "there is not enough space on the disk(s) to complete this operation".
If I try to create a "new simple volume" on the "unallocated" partition, it says the same...

Have I destroyed my new SSD now?! I just want it to work like a new clean disk...

A:If I try to "extend volume" it gives "not enough space on the disk(s)"

Hiyya Tracing try doing it with Partition Wizard mate Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition.
Brilliant tool if you can't do anything with the partition them just wipe the disk mate and start over with this SSD Alignment

1 more replies
Answer Match 95.76%

Hello,

1) At boot up, my computer will prompt with the "Windows - No Disk" error message. I try to cancel each time and usually by the the third cancel it finally goes away.

2) Internet Explorer 6 will freeze with the "hungapp" error message. I have to do a CTRL+ ALT+ DEL to close. This happens quite frequently and just about makes IE 6 unusable.

Any ideas as to what can be causing this? Below is my HijackThis log:
=====================================
Logfile of HijackThis v1.99.1
Scan saved at 22:11:43, on 1/20/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Belkin\Bluetooth Software\bin\btwdins.exe
C:\Program Files\Yahoo!\Antivirus\ISafe.exe
C:\WINDOWS\System32\snmp.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Belkin Bulldog Plus\upsd.exe
C:\Program Files\RealVNC\VNC4\WinVNC4.exe
C:\WINDOWS\system32\MsPMSPSv.exe
C:\Program Files\Yahoo!\Antivirus\VetMsg.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOWS\Dit.exe
C:\Program Files\Lexmark X1100 Series\lxbkbmgr.exe
C:\Progr... Read more

A:Windows "No Disk" error at boot and "hungapp" error with IE 6

Click Run, type in msconfig, click OK, click Startup tab find dit.exe and uncheck it, click apply and reboot system. This worked for me with "No Disk" problem
 

1 more replies
Answer Match 95.76%

Hello,

I need help with this Diskette issue please. "Diskette Drive 0 Seek Failure"
I've had this problem a few times in a couple of years and I have been able to fix the error by pressing F2 and going to the SETUP. And I've done this with no issues. But this time I thought I fixed it but now I get this new error: "A disk read error occurred Press Ctrl+Alt+Del to restart". After I press Ctrl+Alt+Del it takes me back to the same error massage "A disk read error occurred Press Ctrl+Alt+Del to restart". Need help please. This is a Dell Desktop, Windows XP.
Thank you.

Sue
 

A:"Diskette Drive 0 Seek Failure" Error Then "A disk read error occurred Press Ctrl..."

9 more replies
Answer Match 95.34%

I reformatted my computer about 4 weeks ago. Every week I've been doing routine maintenance. Ad/spy/virus check, follow by cleaning of Internet temp files, cookies etc etc.


After that I would do a scan disk and the last 4 weeks has been ok, it completed to phase 3.

Now for some reason it doesn't complete phase 2.

Anyway ideas?

Windows XP, Service pack 3 installed.

A:"Windows was unable to complete the disk check" Stuck on Phase 2

Hmmmm? I just cleared the cache, cookies, etc on firefox which is the default browser I use. Clicked scan disk and it completed pass phase 3.

What the is the relationship between clearing cache, cookies etc that makes scan disk work?. Because it seems I have to clear all those date before scan disk can be completed. Why?

I would have thought clearing cookies, history temporary files via control panel > Internet options > general clears all the data but it seems I have to clear it through firefox too? Why?

What the is the relationship between clearing cache, cookies etc that makes scan disk work?

Another thing. As I managed to complete scan disk. I decided to re check it just incase, at this point I was surfing the net reading some emails, etc and scan disk did not complete.

WHY???

19 more replies
Answer Match 95.34%

Hi,

I doubt the bad sector on hard disk, so I made check disk through the Windows 7 (not in cmd mode). In processing check disk stops at stage "2154545 file record processed" (2154545 is random number), and I wait for 2 hours but without any results. Why check disk stopped at this point? What next to do? Thanks!

A:Windows check disk stopped at "xy file record processed"

Hello and welcome Shark Developer mate can you get into safe mode? If so try the chkdsk again.
Power up and tap F8 and when in safe mode try again using this
Disk Check if the first method doesn't work then try option 2.
Post back what happens.

5 more replies
Answer Match 94.08%

So I just built my new pc 2 days ago my computer will boot up but I get a realllllly long "starting windows" screen sometimes it just freezes there and I have to hard reset it, if it passes that then it goes into a disk check where it freezes every time after all 3 steps are done any suggestions?

A:windows 7 long "starting windows" screen time and froze disk check

I am assuming you are not able to get to the desktop ??

Are you able to get to safemode ??

9 more replies
Answer Match 92.82%

I've tried system restore and got this message:
Windows detected file system corruption on OS (C:). You must check disk for errors before it can be restored.). So down below of that message, there's a link which says ''Check the disk for errors''. So I clicked on it, and then it says ''Windows can't check disk while in use, do you want to check for hard disk errors the next time you start your computer?''. So I agree to it by clicking ''Schedule disk check''. So then I restart my computer & and it does nothing at all. I wanted to try system retore because theres this pop-up that keeps accuring on my Internet screen (Google Crome,Internet Explore) that says ''Please Install Flash Player Pro To Continue'', and saying that It's outdated. But when I did try to install it, It wouldn't let me. Comes to find out, I THINK (Idk) it's like some type of virus. But I was just wondering on why my computer wont allow me to restore now? What should I do??

My computer: Desk Top (Windows 7) Hp S1933
(I'm super slow when it comes to computers, so please bear with me!)

A:Error: "Windows detected file system corruption on OS (C:). You must check disk for e

Hi, go to start search and type, cmd, right click on the returned cmd.exe and select "run as administrator" at the command prompt copy paste the following:-

reg query "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager" > 0 & notepad 0

press enter, please post the notepad outcome here.

1 more replies
Answer Match 92.82%

I had a fresh install of 7 and everything was working fine.
All of a sudden it starts randomly freezing and programs start responding.
I got KERNAL_PAGING_ERROR BSODs etc. and got a new disk, thinking it was that.
After cloning the new disk which didn't work, and produced loads of errors on chkdsk, I decided to do a clean install of 7.

I still keep getting "Disk boot error, insert system disk and press enter", and when it does boot, it freezes all the time and every time I click the start button, it basically crashed and is messed up.

Tried new SATA cable and ports. Any ideas?
 

A:Windows 7 freezing, "Disk boot error, insert system disk and press enter"

BIOS settings or Motherboard issues?

Have you checked with the manufacturer website for the Motherboard that you have the Windows 7 drivers?

Is your Windows 7 DVD a retail copy...or the pre release BETA....or dodgy(in which case problems might lie there)
 

1 more replies
Answer Match 92.4%

I have a big problem here,
I have used my hard disk for 9month,
Yesterday when I watched movie on the half way,
My hard disk suddenly disfuntion,
And I thought my laptop problem due to always lagging so I restart my computer.
But after that I can't read my hard disk (WD)in my computer.
It can read in computer management there.

Ways I try:
1)I try to uninstall and reinstalled again,BUT it doesn't work.
2)I try to unchecked the hide folder and device at view.
3)I try to update the software BUT it still disfunction.
4)I try to use disk management and initialized it BUT there appeared CANNOT INITIALIZED Due to I/O device error.

Any solution for me ?

A:Hard Disk can't read in "my computer ", "initialized",I/O device error

The most usual cause is that the Hard Drive is beginning to fail. Back up your stuff. Go to the website of the manufacturer and test the drive.

8 more replies
Answer Match 91.98%

its listed on my disk clean up list.v can i safely delete these? I keep getting low available memory alerts.

A:i have like 11Gb of space taken up by "archived Windows Error Reports"

Hi Shellysman Welcome to Seven Forums.
Yes you may delete the archived error files. The low memory warning is not due to them though because they would be on your hard drive (HDD) and not in memory.

4 more replies
Answer Match 91.98%

So I bought this computer off a friend and immediately noticed it was already infected with malwares... sometimes when I click on a search result I get redirected to a random website. If I drag the link to create another tab in Firefox it usually opens the right site though. Sometimes I get popdowns as well.

In safe, safe with networking, and regular modes I've ran ESET caught a few files and deleted them, ran Stopzilla and caught a few more files so they both saying i'm clean now. Unfortunately it didn't seem to fix much and now Stopzilla tells me that there is a 'Vundo.y' infection and when i delete the files they just show back up on the scan after every reboot. I also can't install or use Mbam. I could install it a while ago, but the desktop shortcut would stop working and say that it couldn't find the .exe file. Trying to open the mbam.exe started to load it and then did nothing.

Figured I'd just re-install Windows 7, but now when I try to install it I get a error saying "There is not enough free space to store temporary Windows installation files. Try using Disk Cleanup, uninstall old programs, or move files to an external location such as a CD, DVD, or external hard drive. "

I have an Acer Aspire 5517
running Windows 7 32-bit
140Gb HD
1.6 GHz processor
3Gb of RAM

I have access to a windows boot disc

I have no idea what else to try, I'm totally stuck! Any help that you guys could give would be very very much appreciated!

DDS (Ver_10-0... Read more

A:Search engine redirects + windows 7 install "not enough free space" error bs

just did an in depth system scan with stopzilla and caught a bunch more malware files, plus went back and uninstalled utorrent so these reports are probably better than my previous ones. would have just edited them in but you can't after 30 min. apparently.


DDS (Ver_10-03-17.01) - NTFSx86
Run by Tristan at 1:47:17.70 on Sun 06/06/2010
Internet Explorer: 8.0.7600.16385 BrowserJavaVersion: 1.6.0_13
Microsoft Windows 7 Ultimate 6.1.7600.0.1252.1.1033.18.2812.1950 [GMT -7:00]


============== Running Processes ===============

C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\system32\atiesrxx.exe
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\AUDIODG.EXE
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\atieclxx.exe
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\taskeng.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Program Files\ESET\ESET NOD32 Antivirus\ekrn.exe
C:\Windows\system32\svchost.exe -k imgsvc
C:\Windows\system32\rundll32.exe
C:\Windows\system32\svchost.exe -k NetworkServiceNetworkRestricted
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\taskhost.exe
C:\Windows\syste... Read more

3 more replies
Answer Match 91.56%

I have been exploring how to make a backup so that if my computer dies I will have some record (I assume that is what it means) to put on a replacement computer to make it similar to the one I am using now

I use Firefox so tried their FEBE extension ....
FEBE Firefox Extension
but that didn't seem what I wanted

I then tried Tweaking.com Registry Backup as I already have their Windows Repair Pro which I was advised to install in case I ever have problems in the future with something going wrong but have not had to use (yet?) ....
Registry Backup
but didn't understand how I could get that on to a new computer.

So, I uninstalled both of those and have been trying to make a backup onto a memory stick but am running into problems that I will do my best to explain clearly.

I have tried two new 4GB memory sticks and followed the advice in Control Panel, Backup and Restore.

The Start, Computer screen confirms that Drive I (the memory stick) has 3.85GB free before I start.

All starts well but after a while I get the following message "The disk that your backups are being saved on doesn't have enough free space" and also says that I only have 1.39MB free of the 3.8GB.

So I found a video and tried to follow the instructions carefully ....
https://www.youtube.com/watch?v=ZRdkLClj5rQ
and did so until 2.40 in. The previous steps I followed were fine but I simply could not find the Windows Backup file.

I followed the instructions to delete that backup and tried again. I... Read more

A:"Not enough space left to complete backup" on 4GB empty memory stick?

Best to make a full copy (image) of your hard drive, to recover. The Windows backup only backs up certain files. You are still left to reinstall most everything (including Windows). The Marcrium Reflect (a UK company), free version, will do nicely. But, you need something more than a disc or flash drive. A USB connected hard drive would probably be best.
Macrium Software

2 more replies
Answer Match 91.56%

Win 7 backup facility works fine but after the backups have been made I use the "Manage space" tool via Win 7's "Backup and Restore" facility even though I'm using the very same Win 7 user and password I used to setup and run the backups. My user and password has "Administration" authority.

Now the backups are located on a Western Digital NAS. I can view all of the Win 7 backups there via this laptop via Windows Explorer. These backups are located on a "Public" folder on the WD NAS device on my LAN.

I've searched the web for clue/solutions. I even created another Win 7 user and password with "Administration" authority and used it to create backups in a different folder on this NAS device's "Public" folder. Same thing, no access via "Manage space" because "The backup location is not accessible." but I can view the backup files.

More replies
Answer Match 91.56%

So I have this weird thing happening in my relatively fresh install of Windows 10.
Whenever I search for "Check for Updates" or "Windows Update settings" on the search box of the start menu, I get the results that I want but if I press enter or try to click on those results nothing happens.. As far as I know I can click all others search results but those, and maybe others related to windows update.

I can still get updates by going to Settings>Update & Security though.

In my other computers this works fine, and as far as I can tell all the updates are done.
From what I've searched around other people seemed to have a similar issue where they couldn't acess the settings at all which isn't my case. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results.

A:Can't click on "Check for Updates" "Windows Update settings" on Start

Spanker,
.............. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results. .....................

Please clarify what did you mean by "no results".

When sfc /scannow is completed, it will give you one of the following 3 reports....................(paraphrasing)

1. No integrity violation.
2. Found corrupted files and repair is successful.
3. Found corrupted files but unable to repair some of them.

Which one of the above is applicable to you ?

3 more replies
Answer Match 91.56%

as described in the title when i boot my laptop: http://www.newegg.com/Product/Product.aspx?Item=N82E16834117780R
i get the "disk read error -> press cntrl alt del to restart" message. I then tried to access the backup partition through f10 only to run into this error "status : 0xc00000e9 Info : an unexpected I/O error has occurred" it seems that it cant communicate with my hard drive.

I read a few other forum posts but didnt see anyone have the 0xc00000e9 error also. Bios boot priorities are in order if that matters.

Is there a fix without having to replace the entire HD and buy a new vista installation(preinstalled w/ no disc in the box).

Im very reluctant to take it to a service center as i can very likely fix it myself (with the help of the friendly people here of course), only problem is im having a little trouble..finding.. my HD in this damn notebook.. heh, ill figure that part out. new to notebook repair.

Thanks in advance. Danny

edit: found the HD, doesnt look like it even uses a cable, just plugs right into what i assume is the mb. dont know if that helps just supplying what i can.
 

More replies
Answer Match 91.14%

I'm getting a lot of "Check Disk for Errors" and "this hard drive needs to be formatted before it can be used" error messages when plugging my external usb hard drives into my home pc which uses windows 7. I don't get any of these messages when I plug the same hard drives in at any of a number of pcs at work which use windows xp. Any ideas on why this is happening only with windows 7? I'm also getting a lot of disconnects and reconnects on these devices but again only on windows 7.

Thanks in advance for any advice you can give...

DR

A:"Check Disk for Errors" & "hard drive needs to be formatted" errors

Welcome

I would do the ck disk. If you still get the notices, I would be concerned about HD failure. Take the HD diagnosis.
http://www.carrona.org/hddiag.html

1 more replies
Answer Match 90.3%

Hello guys,

I don't know what I did, but nothing happens when I click on those two things in the search bar:

View image: wtf

I reinstalled Windows a few hours ago, and IIRC pressing those with the mouse lead somewhere. Now when I click on them, it does nothing. I have to type in "Settings", so I can click on the actual Windows App. Then I can navigate to those settings. IIRC those results were "clickable".

Can somebody help?

Thanks in advance!

A:Can't open "Windows Update Settings" or "Check for Updates"

Hello iamnewhere,

If you like, here's a Windows Update shortcut to use for now until hopefully an update will sort it for you.

Windows Update Shortcut - Create in Windows 10

3 more replies
Answer Match 90.3%

I have been running Windows Backup on my Win 7 64-bit Home system successfully for a while. I selected a USB drive as my backup destination, and a number of local folders as the source. I also included my OneDrive folder in the source folder set.

My computer's name was "MIKE-PC". I noticed that my USB drive had a special folder (special icon) labeled MIKE-PC and I was not able to open this folder to view its contents.

Recently I did a few things. I changed my computer's name to PENGUIN and renamed some of the source folders in my backup set. I didn't care at that point whether Windows Backup was working because I was reorganizing my data.

Today I finished reorganizing my data, and went to change the Windows Backup settings. First I deleted both MIKE-PC and PENGUIN from the USB drive. Then I went into Windows Backup and changed the source folder set. The set still includes my OneDrive folder.

I ran the backup. I got an error "Unable to create Zip Folder."

I ran chkdsk and made sure Windows was fully updated.

I ran Windows Backup again and got the same error.

Note that I am using another backup program, IDrive, which backs up to the cloud. That has not caused a problem in the past but I wonder if it can create potential conflicts with Windows Backup.

Any idea how to go about debugging this?

More replies
Answer Match 90.3%

Hi everyone

When trying to run a backup through the Windows Backup & Restore interface, I get this error:





Quote:
Windows could not disable the automatic backup job for the following reason:

Element not found. (0x80070490)

Try again.


My backup is setup specifically to run on demand, and I have disabled the option of automatic backups. This error pops up EVERY time I try to run a backup, it's not just a one-off. However, after pressing OK to this error (is appears twice, one after the other), Windows does its thing and gets on with the backup.

So I think there might be a problem with Windows Backup disabling its scheduled backup in the Task Scheduler, since it was previously told to backup on a schedule. So I opened Task Scheduler to see what I could find, and as soon as the program opens I'm greeted with the following error message:





Quote:
The selected task "{0}" no longer exists. To see current tasks, click Refresh.


When I press OK to that error message and press Refresh to reload the list of current tasks, it says in the status area: "Reading Data Failed".

Now, I'm not sure what's up with this. I presume it's something to do with Task Scheduler, since that's not working either. I'm thinking it's going to be something really simple like a Service isn't running that should be...

Having said that, the "Task Scheduler" service is set for automatic start and is currently running... I... Read more

A:Windows Backup error: "Element not found. (0x80070490)"

I've just tried the solution from http://www.sevenforums.com/performance-maintenance/10915-odd-task-scheduler-issues.html and rebooted.

Upon opening Task Scheduler straight after the reboot, it runs correctly as expected, with no errors.

When I open Windows Backup, it tells me that there's no backup set up (but there previously was). So I entered my backup configuration again, and disabled the backup schedule. Again, I got the same error message "Element not found". After having done this, opening Task Scheduler results in error messages again!

Windows Disk Defragmenter was also mentioned as a possible cause for the Task Scheduler errors. So I opened that after having cleared the TaskCache registry folder, and I'm told that another program was used to schedule the Defragmenter and I should click a button to remove the settings.

It looks like the 'solution' mentioned above has helped a lot of people. Unfortunately it doesn't do much for me, since as soon as Task Scheduler is fixed it gets broken again.... Aaah! :-(

Does anybody have any other suggestions? I'd be most appreciative.

Thank you

1 more replies
Answer Match 90.3%

Last night I was copying 2.75tb from drive A to B, I let it run all night came back in the morning and it was froze up 99% of the way through the copy. So I scanned B, rebooted and tried to copy the remaining 55gb but I got the error "there is not enough space on B" I have 800gb available on B, and although I had 2.75tb of files selected (from A) my intent was to opt to "skip" all the existing files on B which would have left me with about 16 times as much space as I needed to complete the operation.

Windows is assuming that all the files I am copying are new unique files (2.75tb of them) and I won't be "skipping" 99% of those files I have selected for the operation & because I only have 800gb free I won't have enough space.


Any suggestions how I can get around this problem?

thanks
Robert Christ

A:Copy (backup) from drive a to b "there is not enough space"

Well I kinda solved it, Because I had 800gb free on the target drive I systematically selected small sections of the 2.75tb source drive for copying that were smaller than the 800gb free on the target drive.

I like the feature warning you that the selected files are larger than the target device but apparently Microsoft engineers never considered the problem I came up against that although the files I had selected were larger than the available space on the target device many of them would have been canceled out by the existing identical files already on it.
Robert Christ

1 more replies
Answer Match 89.88%

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.... Read more

A:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

3. If neither of those work, its likely that because of the fact that when windows is repairing itself, it is generally putting copies of its system files in the same physical location on your disk. Because your disk is obviously not completely dead, ie....its still loading to the windows 7 startup screen, its just copying files to the bad sectors on your hard drive and gets stuck when loading. This is especially my guess because you said Safe mode is having same problems, even after attempting to repair. In the past, I've tried and salvage a disk by reformatting it and only leaving on partitions which do not contain the bad clusters. This takes some time, and some guess work.....and really this is only a "bandaid" fix because once the disk has bad clusters, its only a matter of time before these things give out. You wouldn't want to trust your important data on it anyways....

I hope this leads you in ... Read more

1 more replies
Answer Match 89.46%

I always get a message to "Check backup settings" when I open the Backup and Restore page, stating "Windows cannot find the disk or network location where your backups are being saved."
If I click "Options" I get a message "Check your backup" that says the backup location has a corrupted file system. I run Check Disk and everything is OK. But the above sequence of events still occurs every time I open Backup and Restore.
My backups are set up to be saved on a Samsung hard drive weekly, and I can find them on the drive.
How can I stop this occurring?
 

More replies
Answer Match 89.46%

hi. i'm new here. nice to meet all of you!
just like a lot of folks i'm sure, i've come here because there are some weird things running on my pc that shouldnt be in there.
please help!!!!!!

heres the hijack log
(thanks in advance. i don't know much about this computer virus stuff.)
~eric

Logfile of HijackThis v1.99.1
Scan saved at 10:06:40 AM, on 9/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Dantz\Retrospect\retrorun.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\ZoneLabs\vsmon.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\SYSTEM32\qttask.exe
C:\Program Files\Java\jre1.5.0_01\bin\jusched.exe
C:\PROGRA~1\VERIZO~1\HELPSU~1\VERIZO~1.EXE
C:\PROGRA~1\VERIZO~1\HELPSU~1\SMARTB~1\MotiveSB.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\PROGRA~1\Sony\SONICS~1\SsAAD.exe
C:\Program Files\Common Files\Verizon Online\ConnMgr\cmisrv.exe
C:\Program Files\Windows Media Components\Encoder\Wmencagt.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\ZoneLabs\isafe.exe
C:\Program Files\Common Files\Verizon Online\AppMgr\vz... Read more

A:"windows no disk" and "winsilly" "win956temp"

11 more replies
Answer Match 89.46%

Windows Update error code 80070490 appeared on 20 September 2013 and message "Windows can't check for updates". I use Windows Vista Home basic 32 bit, Service Pack 2. I tried almost all suggestions in Internet (including these on Microsoft Web-page) about this how to fix this problem, including Microsoft Fix It, System Update Readiness Tool, Windows Update Diagnostics DIAGCAB file and etc., but the message continue to appear. The last successful update was on 13.09.2013. All updates made before and on 13 September are written as "successful" in "Update history" folder, but when I open "Installed Updates" folder, I don't see nothing and there is written "No updates are installed on this computer", which is strange, because by this moment Windows Update was made automatically without any problems. Please help me to fix the problem with this error code!

ps.: On 23 of September I reinstalled Windows Update Software from Microsoft Web Page:
Microsoft Update
and the notification message " Windows can't check for updates" from my taskbar dissapeared and never appeared again, so..i thought the problem is solved, but yesterday evening(13 October) when i opened Widnows Update in my Control Panel and pressed "Check for updates" it started to seek for updates but after some time again showed me the same error code and the same message "Windows could not search for new updates". So..it seems Windows... Read more

A:Windows Update error code 80070490 and message "Windows can't check for updates"

Have you run a full scan with Malwarebytes and your anti-virus to make sure that's not an issue?

9 more replies
Answer Match 89.04%

of 0x80070b4 and something about time out. How do I re-install please?
 

A:Security check is telling me that Windows Defender is "off" Attempts to switch back on show an error

Have a loo at THIS link.
 

10 more replies
Answer Match 88.62%

I'm hoping this is a simple fix. I'm trying to fix my elderly uncle's Asus laptop. System Repair pops up and fails. I booted to command prompt and found out it may be hard disk space. 400+ GB Hard drive (only one drive) and there's only 1024kb Free. I'm thinking that could be the issue. Hardware was checked out at the computer store and is fine. But they were going to charge him $200 to fix this failure to boot up issue. I told him to let me try first.

Can I possible "compact" this drive from the command prompt screen?


Note: I have no other Win 7 systems, so can't create a disk, and I have no original disks.
Also, no restore point has ever been set, and there are no partitions on the drive.

A:"Startup repair" failing - hard disk space issue?

Normally, I'd tell you to download a program or two to examine what's using the space or to clean up unnecessary files.

But with only 1024 kb of space, you probably can't install anything.

So--try this:

Start button, search box, type in "disk cleanup" and then poke the disk cleanup listing that shows up.

Let it clean up the drive and report back with how much space you then have.

You'll see an option in disc cleanup where it asks if you want to clean up system files as well. Say yes.

It should calculate how much space it will recover.

Let it run to completion. Might take a few minutes.

Then check your recycle bin to see if it's empty.

Report back with available space.

9 more replies
Answer Match 88.62%

Big Kudos to anybody who can solve this one! Very little/nothing on Google or microsoft support site.
Here's the problem:

I'm helping a family member who has a new Dell PC with Windows XP Home, Outlook Express 6.
Every time they close Outlook Express, the following Warning pops up:
To free up disk space OE can compact messages. This may take a few minutes. There are 2 options - OK and Cancel.

Here is the rub: We've closed the warning, or we've clicked OK, or we've clicked cancel, we've checked the box that says don't ask me again....these warnings continue to come up next time (EVERY time) Outlook Express is closed.

This is a senior citizen who has, maybe, 20 email messages and no shortage of memory or disk space. I want to prevent this warning from coming up ever again. How do I do it? Is there some default I can change somewhere?
 

A:Solved: "Free Up Disk Space" OE warning ?? Stop the Madness!

6 more replies
Answer Match 88.62%

Hello, my system disk is an Intel X25-M G2 80Gb (74.4Gb) and I recently discovered that there is a rather huge discrepancy in used disk space.

According to disk properties I have used up ~73.7 of the 74.4Gb, but the actual files on the disk are only 51.7Gb if I show all hidden/system files, mark everything and check size and WinDirStat report the EXACT same thing.

I have no pagefile on my system disk, no hibernation file and no system restores (it's actually disabled).

So any ideas whatsoever what this could be? It's starting to become rather annoying to "lose" 25% of my system disk. I've run diagnostics and haven't been able to find anything, I've googled it extensively and found others with similar problems, but the only solutions I've found are pagefile, hibernation file, system restores and of course disk cleaning - all of which I have checked already.

A:Approx. 20Gb of system disk space "missing" - Intel X25-M G2

Hello Zeilon, and welcome to Seven Forums.

The tutorial below may be able to help you ID what may be using the SSD's space. Option 1 with WinDirStat is a good starting point.

Hard Disk Space - Free Up and Recover

Hope this helps,
Shawn

3 more replies
Answer Match 88.62%

Hi everybody, I've made a lot of progress with this external drive, but I seem to be stuck now.

-------------------------------------------------

Unidentified problem with 3TB external drive (USB 3.0 enclosure) that the computer suddenly started treating as RAW. Spent the last two weeks running CHKDSK /r repeatedly. Slowly got through many hundreds of indexing errors. Now I get as far as "verifying security descriptors (stage 3 of 5)," but I seem to have hit a wall here...

CHKDSK won?t go any further because there is "Insufficient disk space to fix the security descriptors data stream."

Microsoft?s advice (Error Message:) is of no help to me. They say to ?delete some unneeded files from the disk and try again,? which doesn?t help me since I can?t get the drive to mount or stay mounted long enough to copy the files onto a different drive.

-------------------------------------------------

The drive behaves differently each times I power up its enclosure, but it is usually one of these things:

Drive doesn't mount.
Drive mounts after a few minutes. I see a generic "Local Disk L:" in Windows Explorer but, when I try to explore its folders, the computer takes about 15 minutes trying to read it (I can see the progress bar moving slowly across the top of the screen), and then says that "The parameter is incorrect." Drive disappears from Windows Explorer.
Drive mounts after a few minutes. I see the full Volume name that I originall... Read more

A:"Insufficient disk space to fix the security descriptors data stream."

Someone? Anyone?

8 more replies
Answer Match 88.62%

I have a C: drive which I want to increase in size. Under disk management there is 20GB of "Free space" - (right next to the C: partition). But neither disk management or EASUES partition manager will allow the partition to use this space. How to I change "free space" to "unallocated" so that it can be used ?

A:Cannot extend volume (disk management) although "free space" exists

Can you post a snip showing what you have? An image makes it easier for us to help you. For example, you said that there was 20GB of free space next to your C: partition. What you didn't say was whether it was to the left or right of it.

7 more replies
Answer Match 88.62%

I got the warning msg that my drive "E" (system restore) was almost full. I did a disk cleanup, and a delete all restore points (including system...). After deleting approx 25 restore points and I've deleted down to 2 currently (new ones) and the only way I could get them to go was with CCleaner, My disk now shows only 4.2 free of the setting of 10.6GB. I cannot find what it taking up over 6GB on my recovery disk. What has it gone for....? I searched the internet several hours but can't find the answer. Any help appreciated...TJ

A:Unable to increase free space on Recovery Disk "E"

System Restore points take up space on C, rather than in E or a recovery partition in my experience. A recovery partition is normally put there by the manufacturer to allow you to restore to factory specifications if needed. I wouldn't ever deliberately put anything else on a recovery partition.

Who made this PC?

Can you post a picture of Windows Disk Management so we can see a visual display of your partitions?

3 more replies
Answer Match 88.62%

Hello everyone,

I am currently a new registered user and was wondering if this was the correct place to post my problem. I have a issue with my Local Disk (C:/ Drive) and was wondering what was taking up so much space. I have a 1TB hardrive, currently on my Local Disk I have 136GB free of 454 GB. However, when I add up what I can find when opening the drive, it doesn't add up anywhere near the 317GB that it says has been used.

Now, I have currently installed...CCleaner, Eusing Regcleaner, AVG Free 8.0, and TreeSize, all of which I have run various times (still learning about TreeSize).

BEFORE I was getting scared because I had even less memory free (approx. 74.9GB of 454GB). But after running a Disk Cleanup...it knocked it down to it's current state. It still doesn't explain how I have so much memory used.

My only thought now is that there are extra copies of my folders and files. Or most likely this has something to do with Vista's "System Restore". I am not very adept at using this PC. Whatever advice you guys can give...try to dumb it down for me and tell me where to go (e.g. Control Panel>Systems>etc..)

And my System Specs are incomplete because I don't even know where to go to get all that information! So if you need to know something about my PC tell me where I might find it or just look at what I have for my System Spec.

Thank you very much, I'll be checking my post at least once a day so I'll try to respond quick if any of you pros have an idea... Read more

A:Local Disk/System Restore/"eating" up space

Hello Mike, and welcome to Vista Forums.

This tutorial will help you see how much disk space is being used by System Restore and how to adjust the MAX size it can use. With a 1TB drive, it will have a high MAX by default.

System Restore - disk space

Hope this helps,
Shawn

3 more replies
Answer Match 88.62%

I know it reduces the overall file size of the folder or file in question, but what method does it use to do this?

If you are not familiar with this phrase, it appear if you right-click on a file/folder in windows explorer and select "advanced". When selected the file/folder name will turn blue.

I need to know for some work, I have to compress some work and I could merely show myself using this feature, but explaining how it works would be better.

Thank you

A:[SOLVED] What does "Compress Contents To Save Disk Space" do?

This compression method does not reduce the "size" of a folder, it reduced the "size on disk". am I right in thinking that this compression method does not alter the code of any files, it merely stores the folder in a way which saves space on the disk?

6 more replies
Answer Match 88.62%

i heard this is way to much. what should i set it to?> or what else should i do?

thanks alot,

dustin

A:in my internet options, my "amount of disk space to use" is 8591 MB..?

It's down to preference really but you don't really need it to be set more than 200 mb's.

Hope that helps :)

1 more replies
Answer Match 88.62%

When I couldn't delete the student office trial (which came installed with my HP laptop purchase) from "add/remove" due to having deleted first, a different but associated program (can't recall the name), I followed these tedious instructions found on this link - http://support.microsoft.com/kb/928218

The problem is...I noticed that instead of freeing up disk space, it took up more. How can I remove this trial completely to free up space?
 

A:Office Trial Removed From "Add/Remove" YET Ate Up Disk Space

ellaphant5 said:


due to having deleted first, a different but associated program (can't recall the nameClick to expand...

This can be a problem.

Also, I would say that fix from MS applies only to when the proper procedure for the uninstall of Office is followed but the end result is not what we expected so basically that didn't wasn't any help.

We need to know what other mystery "associated" program is.
 

1 more replies
Answer Match 88.62%

Hi there,

I am facing a problem with the backup program of Windows 8. My computer (Asus with 250SSD) disk is new and I just installed my programs. Now I want to create a System Image using Windows. The image should be around 50go. Everything works fine until I get a message error saying my external disk does not have enough space, which is impossible since it is completely empty (500go).
Did anyone have ever meet that problem and/or have advices to help me? I would like to solve that and not be forced to used another way to backup.

Thank you,

Vari

A:Create system image failed - "not enough space on disk"

Is your second disc formatted NTFS?

7 more replies
Answer Match 88.62%

when i try to run word 2007 i get the following error message:
There is not enough memory or disk space to run word 12

I have 1Gb RAM with 550Mb free and 2Ghz Turion with 7Gb free space on the system partition and 15Gb free space in the other partition

can any tell me why its doing this?

thanks
 

A:OFFICE 2007 - "Not enough Memory or Disk Space to run word 12"..?

7 more replies
Answer Match 88.62%

I use microsoft office 2007 My computer is dual core 2.53 Ghz 3 GB memory and I have 91.4 GB free disk space.
I am using Windows XP Professional Version 2002 Service Pack 2
I work a lot with word and did not have any problem. Now i have a problem with one particular file that I can not open and I always get the error "There is not enough memory or disk space to complete the operation. " When I try to open the file File size is not so big 652 KB Any ideas what I can do.

Thanks
Ofer
 

A:Solved: "There is not enough memory or disk space to complete the operation."

What type of file? Where did it come from?

If you do not have file endings showing, you should. Be sure that there is not a hidden "exe" or "com" at the end of that file.
 

3 more replies
Answer Match 88.62%

Using XP SP-1, 40GB HDD
A folder named "System Volume Information" has been created in each drive (C:,D:,E:,F: )
and consuming significant disk space day by day. Whether deleting these folders will create any problem. Any other technique to stop increasing the size of these folders ? Please suggest.
Presently consuming more than 3 GB in total.
Sometimes I need system restore to speed up the PC (besides other registry tools ) ..therefore this function is enabled in the system.
 

A:Too much disk space consumed for "System Volume Information"

9 more replies
Answer Match 88.62%

Hi there!
First of all thanks for the great toturial and the forum.

I tried to do the in-place upgrade from Windows 10 (build 1607) in order to "repair" my system (there are some quirks I want to get rid off) using a freshly created USB (as per description), but it fails with the message "make sure that there is enough disk space available in your PC" (rough translation from german; see attached screenshot) without any further information.

It then automatically cycles back to the question on how to install (i.e. with keeping data and apps or without) and then back into the above mentioned error message.


This is what I already tried or made sure of prerequisites needed:
I have made sure that there is definitely enough disk space available.My C: partition (where windows resides on) is 106 GB large and has currently over 58 GB of free space available.The system partition that is supposed to be 350 MB is still 350 MB (I read something about this potentially being reduced to 100 MB by other tools ...).I have deinstalled the Kaspersky anti virus tool (reinstalled it now after several tries with no success).I have disabled (i.e. fully decrypted) the disk encryption bitlocker on all disks.

My partitions (as seen from "Mini Tool Partition Wizard" and "Disk Manager"):
Do you have any ideas on what else could be wrong?
What intrigues me most is the fact that there is no further information in the error message on what or where is missing... Read more

A:In-Place Upgrade fails with message "not enough disk space"

Hi, Mark and welcome to Ten Forums.
Have you tried to mount the ISO in File Explore, instead if using an USB stick?
I just download the current ISO here: Windows 10 ISO , mount it in File Explorer and run the setup.exe.

22 more replies
Answer Match 88.62%

I know this question has been asked before as I've read about it all over the Internet. In order to get rid of the 'Low Disk Space' message it says to go to the registry and locate HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer, type a new value, etc. The only problem is I don't have an Explorer key. It ends at Policies.

I've tried everything. I've tried creating the key myself, and I've tried inserting the value into the policies folder. Nothing has worked. Can anyone help?
Thank you
Brad
 

A:Solved: Can't get rid of "Low Disk Space" message on my recovery drive

I guess no one else is having this problem. Do you think this is a problem with HP?
Brad
 

3 more replies
Answer Match 88.62%

Is it possible this can do any harm to my computer?

 

A:Quick question about the option "compress drive to save disk space"

I have never knwon it to, it doesn't delete any of your wanted files, only temporary junk!
David
 

3 more replies
Answer Match 88.62%

I have a Western Digital 1 TB My Passport Essential SE that I'm trying to use to do a backup of my laptop (Dell XPS M1530) running Vista Home Premium SP2 64 bit. The internal HD is 300 GB which is mostly full. The first time I ran the "full backup" of the files, I already had 200 GB used on the Western Digital and knew that I had plenty of space. The external HD was formatted already in NFTS. After 12 hours or so, I got the message that I needed an additional 400 GB ! Without thinking, I formatted the external drive in NFTS. I ran the "full backup" of the files on my laptop again for 12 hours and got the same message. When I look at the files on the external drive after getting this second "need 400 GB more space" message, I checked to see what files were already copied to the external drive. There is roughly 140 GB worth of files copied on a "Backup files" folder and a "catalog" folder (both folders are in another "backup set" folder").

What does not make intuitive sense is that a 300 GB internal drive cannot backup to a 1 TB external hard drive. I did not copy down the numeric error message (0x007008.....) that followed the "not enough space" message.

Any suggestions on how to get past this issue ? I've been using this same WD external HD without any issues for awhile.

More replies
Answer Match 88.2%

I had the same trouble. I had never backed up my hard drive before i had kind of run into it so i figure what the hay i'll try it. It told me to back it up on the D drive or disk. (since i didn't have a disk setting there i figured i would back it up on D drive) Well after a few min. it said i didn't have enough space. So i figured Oh well. I didn't need to back it up. Well EVERY TIME I Reboot the computer now it tells me I'm low on disk space on drive D.
Now everyone know D drive doesn't have alot of space it has your system on it. But why now is it checking it all the time. When it tells me to clean it , it shows me where and there isn't anything to clean. THIS IS ANNOYING! HOW DO I MAKE IT STOP?

There is no screen to give a shot of. It's a little icon on the task bar that pops up. Than when you click on it it says delete unused files. When you click on it it gives you the list of files you can delete. BUT there is only two things on it and both are all ready empty. One is recycle bin.

A:[SOLVED] How to stop "low disk space" messages

Hi Rachel3790 and welcome to TSF !

It's better to start your own thread so that we keep one thread for one user. Here's a link to the related thread you first posted into :
http://www.techsupportforum.com/f10/...ve-182725.html

Which program did you use to backup your system drive ?

If this is an HP computer have a look at the link advised by Mon in the other thread :
http://h10025.www1.hp.com/ewfrf/wc/g...reg_R1002_USEN

Else, when disk space is running low, Windows may advise you to run the disk cleanup utility which allows you to delete temporary files and empty the recycle bin, among other things. Since this doesn't help it means that your hard drive is simply filled with your own data and the data from the programs you installed on it. The backup you just created is probably also taking some space and if you don't need it you should just delete it.

What you need to do is copy some files on CD's or DVD's, on an external drive or to another computer. You should uninstall the programs you're not using anymore using add/remove programs and you can also delete some old documents of yours in your "my document" folder if you don't need them anymore.

Be careful not to delete any system file or folder. Files that are safe to move away are video and music files. These media files usually take plenty of space and you can free that space if you burn them on CD's or DVD's and delete them from your hard drive.

If you have no idea what's using up space o... Read more

4 more replies
Answer Match 88.2%

Doing some maintainence on my computer, i am considering doing this option: "Compress drive to save disk space". There is also a "compress old files" to save space

are these both the same things? (same drive)
can i undo this options? im a big fan of reformatting to undo problems in the event its challenging to undo compress a file.

thanks
 

A:"Compress drive to save disk space"

6 more replies
Answer Match 88.2%

I used Creative Lab's Wave Studio for years with a single problem.

I loaded it onto my sister's computor and the first time I tried to save a file, I got an error message saying:

"There is insufficient disk space to save (file name)."

She had several gigs of open space so I just chalked it up to something funky of her PC.

A few weeks later, my HD crashed, so I installed a new one and re-loaded my software. When I fired up my Wave Studio (version 4.02), I got the same message. Now I had roughly 75 GIGS of free space.

I'm not a newcomer to the world of software troubleshooting, but this one has me stumped.

Any help would go a long way to restoring my sanity.

Rich
 

More replies
Answer Match 87.36%

Hi,

I've been having this problem for a few days now. Every time I start up I get this error message Windows - no disk Exception Processing Message c0000013 Parameters 75b6bf9c 4 75b6bf9. Also when I open up task manager the window looks funny i.e. all the tabs disappear and I cannot close it. This thing seems to be slowing down my system.

Please advise. Thanks!

Raphael
 

A:Solved: "Windows - No Disk" error message [moved from XP; further malware help may be

8 more replies
Answer Match 87.36%

I just began getting this error yesterday. What is the likelihood that another issue besides a failing hard drive is causing error? Secondly, I've already purchased a new hard drive as a precaution. What is the fastest/easiest way to backup/clone this drive?

A:"Windows detected a hard disk problem" error message

Hello,

Please open an elevated command prompt.
When you have the command promt open please enter the following command:
sfc /scannow and press enter.
After the scan is 100% and the scan did repair files please restart your computer.

Please re-open an elevated command prompt and enter the following command:
findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >%userprofile%\Desktop\sfcdetails.txt

The cbs.log file will be posted on the Desktop as the current user, named sfcdetails.txt. Please attach this file in your next post.

Note: You can also copy/paste the commands to make it easier.

1 more replies
Answer Match 87.36%

I recently did a whole new build, new hard drive, mobo (GA-P35-DS3L/S3L) and processor. The problem is, I'm trying to install Windows 7 Ultimate and I come up with "Insert system disk and press enter" error when I try to boot from the disk. I checked the BIOS and the mobo had recognized the DVD drive and the hard drive. I tried putting the hard drive under slave and the DVD drive under master, and vice-versa. I am a high school student who generally gets lots of home work, so it would be nice to be able to type out my work. I am also a gamer, and my friend and I are trying to get my computer fixed, and it's really frustrating. I would like to get this fixed as soon as possible

Cheers!
Hans
 

A:"INSERT SYSTEM DISK" error when trying to install Windows 7 Ultimate

If the hardware is so old that you are using IDE drives, are you sure that it even will run Windows 7?

Is the DVD a full, retail version from Microsoft?
 

2 more replies
Answer Match 87.36%

Hello people, I have an external 500 gigs drive with over 100 gigs free and a partition on a RAID 0 with 500 gigs free. I was trying to copy a folder with 25 gigs of data from my external hard drive to my 500 gigs partition, until at about copying 2.5 gigs, Windows shows up a warning saying that there is not enough disk space and that the file (was 500 Kb...) could not be copied. I skipped it and kept doing the same thing for every subsequent file... whats my computer's problem? I have WIndows Vista Home.
Thanks!
 

A:Solved: "There is not enough disk space" warning

16 more replies
Answer Match 87.36%

I am trying to copy a 9gig video file to my Seagate external USB 2 drive for back-up.
The drive has 140gig available, but I keep getting the "not enough free disk space" warning when I try to move it and it will not allow it to be copied.
What am I missing? is it a format thing?
 

A:Solved: "not enough free disk space"

6 more replies
Answer Match 87.36%

"Not enough memory to run microsoft excel. Please close other programs and try again"
So this morning I tried to open up excel, and this message comes up. Same happens for word.
Then I try and open it again and it wants to run in safe mode, and then the same problem happens.
Then I open it again and it says "Excel failed to launch in safe mode. Do you want to start Detect and Repair?"
So I run that and it says setup completed successfully. But I try and open it and I get the original "not enough memory" message, and it's just a big loop.

I have enough memory, 3GB and I'm using office 2007 on windows 7.
It's been running fine since this morning.
 

A:"There is not enough memory or disk space to run excel"

How about diskspace that's ' memory' too.
The environment settings voor %TEMP% could be invalid?
 

3 more replies
Answer Match 87.36%

I have to harddrives, drive :C/ and drive D :/ drive c has the basic miniums and came with 16 gbs of space which is completely full with windows , then drive d has 136gbs and is 103gb of free space left
ANYTHING i try to download i try to make it go to Drive D but none the less i keep getting the error "not enough disk space"

this is a brand new system, that a friend whos good with computers built for me for my gaming needs, i have a

intel r core tom 2 quad cpu 6600 @ 2.40GHz 4 gb ram 64 bit operating system..

if you can help or need any info please let me know where i can find the info for you on the computer im pretty crappy with computers so i need all the help ican get

A:keep getting "not enough disk space" with 2 hard drives

anyone have any ideas? this is getting really frustrating....

2 more replies
Answer Match 87.36%

Hi

I have recurring problem, which I have noticed on PCs other than my own. The used space on my hard disk drive is approximately 5GB higher than the total of all the files on it. (It's always been around 5GB, every time I've seen it). The only thing I can do is to reformat the disk, and it will be fine for a few months, and then the same amount will "disappear" again. Disk cleanup, ccleaner, etc don't help, and it's not the recycle bin or temporary files.

It happens on my primary (Windows XP) partition, but not on the secondary partition, and last week it happened on my external hard disk after I deleted a large quantity of data.

I only have 60GB in total (30GB on the primary partition) in my laptop, and 40GB on the eternal drive, so its pretty annoying to lose 10GB. If it makes any difference, my external drive is a 2.5" laptop drive, a Hitachi Travelstar, NTFS formatted. Not sure what brand is in the laptop, but it's FAT32. But I've seen this happen on a friend's desktop too (again only on the primary partition).

Any ideas why this happens and if I can do anything about it that doesn't involve reformatting?

drawde
 

A:"Lost" hard disk space

Tell me if I'm teaching you to suck eggs, but what size blocks do you have on your drives, because without decent sub-block allocation, you'll often lose parts of blocks for files when they're smaller than the block size. Even with sub-block allocation, you'll still lose a bit because of the overheads, but 5GB seems a little steep for that size of disk.

If I compare my size of files, with size on disk, I'm losing ~1-2% of the disk. That's with the default block size of 4K. But it probably depends on the number of small file you have around the place.

After deleting a large number of files, it's probably worth-while running a disk cleaner to make all the blocks contiguous again, and that should give you back most of your space, but if they are really not getting re-allocated as free space, then I'll have to dig more.

Rich.
 

1 more replies
Answer Match 87.36%

I frequently get a notice that the disk space on my D drive is low and asking me if I want to clear up some space by using the cleaning utility that came with Windows XP Home Edition. This disk is my secondary drive and I know the space is low. Is there a way that I can get rid of this annoying notice that appears on my screen every so often? Thanks.
 

A:Solved: Notice of "Low Disk Space"

Hi referee07,

The "clean up unnecessary files" is safe to use. You can also add
choices in the list of what's to be deleted. You can also safely
remove all temporary files... Search for "*.tmp" (without quotes)
and delete those.

Also the trash bin standard setting is 10% of your drive. I would
adjust that downward to 2 % on all drives.

And, of course, you can delete some things that you really don't
need, or put them on a CD if you have a burner. Hope that helps.
 

2 more replies
Answer Match 87.36%

Forgive me, but I?m new to the forum and relatively new to [rebuilding] computers (compared to some of you, I?m sure?) I do have a tech background.

Having said that, I had to do a re-install of XP (SP1) on a Dell Optiplex GX620 that I have. While at it, I upgraded the HD to 1.5TB (Seagate Barracuda)

The XP install went well. I did not have a restore disk for the drivers, so I went to Dell?s driver download website and downloaded the correct drivers for my model/service tag.

I put the drivers on a USB flash drive and moved them/loaded them onto the Dell. I installed the drivers in order and most installed fine. A few however, such as the Broadcom 57XX Gigabit Divers, are telling me that I am out of disk space. I get the error and a dialog box says that the volume on the C: drive is -650GB, and I have -655GB Available, with 2328KB Required and Differences of -650GB? I have no-idea what?s going on here, but I can?t seem to install the driver(s).

I did Disk Clean-up, defrag, chk disk, Ccleaner? blah, blah, blah? I am only using 1% of the available drive capacity.

Any ideas?

A:New O/S and driver install "Out of Disk Space"???

BUMP... Does anyone know whats going on with this? It's a simple re-install and driver install problem; not a virus or anything weird.

Someone has on this forum has HAD to have seen this before.

Please help.

Thanks.

5 more replies
Answer Match 87.36%

I'm getting the Low Disk Space message in Windows XP. Well, DUH...I knew that I was running out of room, so I bought an external hard drive with more space than I'll ever fill. Like an idiot...when I got the external.....I just went to folders...sometimes programs and used "send to" the now G: drive. Yes, I know, that was STUPID! Many of the same files are duplicated, etc so that they were copied and sent....not actually MOVED. Some of my programs don't even work correctly anymore.

I know that I can do a system restore....but I'm almost afraid that it might crash my pc. What is the easiest way to fix this problem and put everything else, except my bare essentials, on the bigger drive?

Thanks!
 

A:The dreaded "Low Disk Space" message

bumping this hoping to get some help
 

3 more replies
Answer Match 87.36%

I am getting this window popping up every 2 or 3 minutes despite clicking on it and ticking the usual boxes to remove the unwanted files - 3 minutes later back pops the warning

its as if the pc doesnt know I'm actually doing it

I have followed this advice given to someone else on another site

"Insure the temp files in the hidden Local Settings folder are deleted.
Start>My Computer> Local Disk C> Computer user name> Then go to tools (at the top)> Folder Options>View and put a dot in show Hidden Files and Folders Click OK> Open the Local Setting Folder>Temp> Delete all the files you can in the temp folder.
3. Run Disk Clean from the Start>All Programs> Accessories> System Tools>Disk Clean Insure you remove all the compress old files.
4. Get Rid of the Restore points and Lesson the amount of disk space System Restore uses.
Right click on My Computer>Properties>System Restore and put a check in turn off system restore now click on the Settings Button Choose a setting of 1 - 5% click apply and OK
Go back and TURN ON system restore, insure the amount of disk space for system restore did not default to the Max amount."
but it hasn't made any difference whatsoever

could this be a virus? I ran malaware and then 'search and destroy' but that made no difference either

I have an Acer Aspire T1 2OE
 

A:incessant "low disk space" warnings

16 more replies
Answer Match 87.36%

In Explorer on Computer, is there a way to change the number of gigabytes or percentage that Windows uses before it changes from the blue bar to red? For instance, I have an array that is 1TB, but it still has over 15GB free on it, but Windows interprets that percentage as the drive being low, so the bar appears red.

To me, I don't want that bar red unless there is say, 5GB remaining, or maybe even 1GB. 15GB still goes a long way, even though it is a small fraction of 1TB.

Ideas?

A:Changing the Disk Space Bar "Low Level"

  
Quote: Originally Posted by muzicman82


In Explorer on Computer, is there a way to change the number of gigabytes or percentage that Windows uses before it changes from the blue bar to red? For instance, I have an array that is 1TB, but it still has over 15GB free on it, but Windows interprets that percentage as the drive being low, so the bar appears red.

To me, I don't want that bar red unless there is say, 5GB remaining, or maybe even 1GB. 15GB still goes a long way, even though it is a small fraction of 1TB.

Ideas?


15Gb out of 1Tb would be considered low to me.

2 more replies
Answer Match 87.36%

My laptop is having problems with reading USB flash drives and recognizing iPod nano.

When I plug in a USB flash drive or iPod, Windows assigns a drive letter, eg. Removable Disk F: but if I try to open in Windows Explorer I get an error eg. :"The disk in Drive F is not formatted. Do you want to format it now?"

I've tried different USB sockets on the laptop- same problem. The flash drive and iPod work fine on all other computers so it seems local to this laptop and I can't see any reason to format it.

I am using a Lenovo 3000 N200 laptop running XP SP3. To attempt to rectify this problem, I reverted to SP2 using c:\windows\$NtServicePackUninstall$\spuninst\spuninst.exe

Following this, I was able to access files on the flash drive for a few moments but when I attempted same with the iPod, I got a Windows crash and following the restart am back to square one, with neither flash drive nor IPod being usable except windows XP remains at SP2.

Anyone have any clues to what might be going on?? Thanks for any pointers.
 

A:Windows XP gives "disk not formatted" error on USB flash drive

11 more replies
Answer Match 87.36%

Powerdvd wonít play DVD
Windows Media player says there is no disc in Drive E.

I wondered if it was a hardware conflict and tried to use windows help hardware conflict troubleshooter but it did not seem to be working
Any ideas would be appreciated.

Pete
 

More replies
Answer Match 87.36%

Hi,

Would someone please be able to assist me with this problem? I keep getting the "Windows - No Disk. Please contact System Administrator" problem on my PC. Usually a reboot solves this but it creeps up after time again.

I ran a HijackThis system scan and here is the log...

Logfile of Trend Micro HijackThis v2.0.0 (BETA)
Scan saved at 1:01:12 PM, on 2007/03/21
Platform: Windows XP SP2 (WinNT 5.01.2600)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Ahead\InCD\InCDsrv.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Network Associates\Common Framework\FrameworkService.exe
C:\Program Files\Network Associates\VirusScan\Mcshield.exe
C:\Program Files\Network Associates\VirusScan\VsTskMgr.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\NALNTSRV.EXE
c:\Ora920\bin\omtsreco.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\wm.exe
C:\NOVELL\ZENRC\WUOLService.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\System32\dpmw32.exe
C:\WINDOWS\system32\NWTRAY.EXE
C:\Program Files\Network Associates\VirusScan\SHSTAT.EXE
C:\Program Files\Network Associates\Common Framework\UpdaterUI.exe
C:\Program Files\Common Files\Network Associates\TalkBack\TBMon.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOW... Read more

A:WIN XP: "Windows - No Disk. Please contact System Administrator" error

They are going to tell you to get the old version of HJT, 2.0 is in BETA. Get the older version here:

http://www.pcworld.com/downloads/file/fid,23258-page,1-c,downloads/description.html
 

2 more replies
Answer Match 87.36%

Hi guys,

A computer at work has given us a "read disk error" when booted up.

I was not at the computer at the time, but have come in the day after to fix the issue.

Now....

I boot it up and it works fine. I restarted multiple times, and shut it down and booted it up again and works fine.

What could be the issue here?

Also, if I where to back it up, how would I go about copy everything to a new hdd, and have everything exactly the same.

Thanks in Advance

More replies
Answer Match 87.36%

I have an Acer Laptop and I am unable to open any USB flash drive or hard disk with a FAT32 file system. I get a "Disk is not formatted, do you want to format it now?" error. When i do try to format it says "Windows was unable to format the drive". The same devices work fine on other computers. Booting in Safe Mode does not help. I have an external USB hard drive with two partitions one of which is NTFS and the other is FAT32. The NTFS partition works fine in my system while the FAT32 partition gives the same error. The problem apparently started after I had to to a 'chkdsk /r' and a 'fixboot' command via the Recovery Console because my system was stuck in a BSOD reboot loop (Unmountable Boot Volume). Since my CD/DVD drive does not work properly I had to create a bootable USB thumb drive with the Recovery Console to do that. The computer works fine now save for this USB problem. Extremely frustrated since i cannot transfer any of my files to or from my computer because USB was the only option i had after my DVD Drive failure.

Any help greatly appreciated. Thanks.
 

A:"Disk not formatted" error on Fat32 drives (Windows XP)

12 more replies
Answer Match 87.36%

My laptop is getting really slow and i cant use browser as it gets slower and hangs a lot. What do i do ?
 

A:windows error message says " your hard disk is at risk"

16 more replies
Answer Match 87.36%

Hi,
I am trying to install Windows 7 Ultimate 64bit on to a dell xps and having a lot of problems.
The Computer has 3 harddisks
C:\ - Vista (Came preloaded With the Pc when i bought it)
D:\ Vista Recovery 10GB thing (Came preloaded With the Pc when i bought it)
F:\ Empty drive i want to install windows 7 on
J:\ Harddrive for everything else

The problem is when i boot from the disk i can start the installer but when it allows me to choose where to install to the harddrive always comes up as "Can not install blah blah, Windows can NOT boot from this Disk"

I have tried all sorts of ways to get around this like unplugging everything apart from the cd drive and harddrive i want to install it on, im getting really fed up with this. Is the problem that im trying to do a dual boot?
I also read somewhere about getting sata drivers for my motherboard but after hours of searching the web gave up.

All i can tell that my motherboard is is a FOXCONN LS36 but i can't find sata drivers for this anywhere!
On the dell website i tried all of the Sata downloads but if i locate the downloaded file whilst in win7 setup it doesn't like the file.
Am i doing some majorly wrong and stupid here?
Please help me!!!

Spud
 

More replies
Answer Match 87.36%

Started receiving "Windows - no disk" error. Here's my hijackthis log:
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2:16:23 PM, on 11/23/2008
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18000)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskeng.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Users\Carey\AppData\Local\Temp\sidebar.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\Symantec AntiVirus\VPTray.exe
C:\Program Files\COMODO\Firewall\cfp.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe
C:\Windows\system32\DllHost.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant =
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch =
R1 - HKCU\Software\Microsoft\Windows\Cu... Read more

More replies
Answer Match 87.36%

Greetings everyone.
Last Tuesday when I turned my computer on, I got the message ďA disk read error occurred, press crtrl+alt+delete to restartĒ. Since then I have been searching online for a way to get my computer back up & running.
The specs of my computer:

Dell Inspiron 9100 Notebook
Windows XP Pro SP3
P4 @ 3.2 Ghz w/ Hyper Threading
1 gb Memory
160 gb Western Digital PATA/IDE HD
(Replaced original 80 gb HD in May 08 b/c too small)
Removable internal DVD/CD-RW drive (& a removable internal floppy disk)
Purchased in Oct. 04.

When I installed the new HD back in May, I used Apricorn EZ Gig II & the included HD enclosure to copy the contents of the old HD onto the new one.

I first ran the onboard Dell diagnostics; it did a full system scan (from the processor to the memory to the HD) it told me everything was fine.
I then ran the WD hard drive utility from a floppy disk. I ran both the quick & full tests and it told me there were no problems.

Since the HD seems to be alright, Iíve been wondering if something has corrupted the Master Boot Record. I do my best to keep my system in check; security-wise I run Norton 360 2.0 & Ad-Aware 2008 (thereís more I can do though, I know). I donít think it could be malware, but who knows.

Anyways, Iíve tried booting from my Windows CD to get to the Recovery Console or do a repair installation, but things hit a snag. The drive spins up & I get a message telling me setup is preparing files, but then the scr... Read more

A:Windows XP "Disk Read Error Occurred" Problem, difficulty in resolving...

6 more replies
Answer Match 87.36%

i just had my satellite fixed and i want to create a disk to backup everything that i have on my computer.it has only the things that came with the computer on it."fresh installation" and i need to know what kind of disk, and how do i know exactly what to back-up? never backed up anything before.do i use a dvd disk? and if i use a regular cd-r will it fit everything on one disk ? thanks in advance for any help!
 

A:"new toshiba satellite" how do i create a backup disk before i start using computer.

there should be an article in the manual you have,DVD-rs usually and how many depends on how much data you got
 

2 more replies
Answer Match 87.36%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Answer Match 86.94%

I get this error in a box everytime I boot up. I'v already tried Windows defender, Ad-aware, my Mcafee virus scan and none of these seem to get rid of it? I have attached a copy of the "Hijack this" scan log for your use. I was told that this might help.
 

A:Windows xp home "No Disk error" on boot

I have posted the HijackThis log file to the open forum for you so it will be seen peoperly by an expert. Please to do this.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:21:00 PM, on 7/29/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16473)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\system32\drivers\KodakCCS.exe
C:\WINDOWS\system32\LxrJD31s.exe
C:\Program Files\Common Files\McAfee\HackerWatch\HWAPI.exe
C:\PROGRA~1\McAfee\MSC\mcmscsvc.exe
c:\program files\common files\mcafee\mna\mcnasvc.exe
C:\PROGRA~1\McAfee\VIRUSS~1\mcods.exe
C:\PROGRA~1\McAfee\MSC\mcpromgr.exe
c:\PROGRA~1\COMMON~1\mcafee\redirsvc\redirsvc.exe
C:\PROGRA~1\McAfee\VIRUSS~1\mcshield.exe
C:\PROGRA~1\McAfee\VIRUSS~1\mcsysmon.exe
C:\Program Files\McAfee\MPF\MPFSrv.exe
C:\Program Files\Softex\OmniPass\Omniserv.exe
C:\Program Files\Softex\OmniPass\OPXPApp.exe
C:\Program Files\SiteAdvisor\5020\SAService.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\mcafee.com\agent\mcagent.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\Program Files\Viewpoint\Viewpoint Manager\ViewMgr.exe
C:\Program Files\Common Files\Real\Up... Read more

2 more replies
Answer Match 86.94%

I have a Lenovo Stick 300 (Intel Compute stick clone) and I formatted the drive. I made a recovery USB and when I boot it and try to install, it says something like "drive too small." It has a 32/28GB SSD and I could install Windows x86 on it. I can't get the graphics driver in 32 bit though.

More replies
Answer Match 86.94%

I get this error message whenever I try to run iTunes or load a music CD. I cannot get it to disappear, and end up having to reboot. I have run A-Spyware & A-V software, and have cleaned my register.

I saw a solution to this in forum threads, which referred to using "Hijack This". But the solution required someone else to look at my log file, and then suggest specific actions.

Can anyone help me through this please?

Many thanks.
 

A:Solved: Error Message "Windows - No Disk"

13 more replies
Answer Match 86.94%

First of all, i just want to let everyone know that i am not very good with computers so, please bare with me.

Here is my problem, my wife was trying to download pics from her memory card of her camera (sd card) to my computer so that she could burn the pics to a cd. My computer (Gateway GT5016H) has a slot to insert the memory card into the tower of the computer. She inserted the card, retrieved the pics and proceeded to burn them to a cd. When she was done, she shut down the computer.
Now evertime i start the compuer i get an error message pop up "windows-no disk" "there is no disk in drive. Please insert disk into drive." I also must click cancel multiple time to get rid of the error message. Gateway tech's could not help resolve the problem and told me to contact the manufacture of the sd card because they believe there is a compatability issue. I have windows XP if you need to know.

Can anyone help me.
 

A:Solved: Error message "windows-no disk" Please help me!

16 more replies
Answer Match 86.94%

I recently burned a couple of CDS (filled with videos and mp3s) and MADE SURE that they worked properly and were burned correctly BEFORE I deleted the videos and mp3s from my computer. Well, I burned about 5 cds. I was checking over some of the CDs and 2 of the burned CDs dont want to work. I get the following error:

"Windows cannot read from this disk. The disk might be corrupted, or it could be using a format that is not compatible with Windows"
Why am I gettin this? Im POSITIVE that the disk was burned correctly but now all of a sudden Im gettin this error. I got Windows XP SP2, Gateway Computer.
 

A:Error Message: "Windows Cannot Read From This Disk."

Are they in perfect condition?
 

2 more replies
Answer Match 86.94%

Hi all

I'm having problems with the above error which pops up everytime I restart and periodically. I have ran AVG anti virus successfully and also SpyBot SD which removed all found problems (had to run it in safe mode to remove one issue). My HijackThis log is below:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 11:34:51, on 14/05/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\svchost.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\Program Files\Java\j2re1.4.2_03\bin\jusched.exe
C:\windows\system\hpsysdrv.exe
C:\WINDOWS\system32\hphmon06.exe
C:\HP\KBD\KBD.EXE
C:\Program Files\Common Files\InterVideo\SchSvr\SchSvr.exe
C:\Program Files\InterVideo\Common\Bin\WinRemote.exe
C:\WINDOWS\system32\keyhook.exe
C:\WINDOWS\AGRSMMSG.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\Program Files\ATI Technologies\ATI Control Panel\atiptaxx.exe
C:\WINDOWS\ALCWZRD.EXE
C:\WINDOWS\ALCMTR.EXE
C:\PROGRA~1\AVG\AVG8\avgtray.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Progra... Read more

A:Need Help with "Windows - No Disk" error, log file included

Run HijackThis and click on "Config" and then on the "Misc Tools" button.
If you're viewing HijackThis from the Main Menu then click on "Open the Misc Tools Section".
Click on the "Open Uninstall Manager" button.
Click the "Save List" button.
Copy and paste that list here.
 

1 more replies
Answer Match 86.94%

hey all, i just reformated my computer. i have 2 hard drives. one which stores all my system files, os etc. and onther which i use just for storage. When i restarted my computer for the first time since reformating i had a message sayinf somthing alng the lines of:

"One of your disks needs to be checked for consistency. You
may cancel the disk check, but it is strongly recommended
that you continue."

i wasnt at my computer so it decided to go ahead and do it anyway. by the time i got to my computer and turned it off, booted it back up and avoided the dick check again on start up it had already deleted 20 gigs of my music files. It was saying somthing about orphened files when it was running through deleting everything from image files to mp3s. please let me know if there is a way to resotr my deleted files or find out exactly what was deleted. ive never seen anything like this.
 

A:Disk Check Keeps Deleting my music, "orphened files" help!

^^ bump for help pleASE
 

3 more replies
Answer Match 86.52%

Hi everybody,

The title says it all. My dad was using the computer to watch some videos online when Mozilla Firefox froze. Then I tried to get into the task manager using Ctrl+Alt+Del and that wouldn't work. Tried right clicking the taskbar and going into task manager and that didn't work either. So I just shoved the power button to turn off the computer, and turned it back on. It hung on the "Starting Windows" screen for a while, then it launched into check disk. It scanned for a bit, then said "File record segment 2xxx is unreadable" and it kept going until about 58%, then it just kept giving "File record segment 3xxxx is unreadable" and kept going up until "File record segment 44139 is unreadable". Then it said something about index errors and the computer reboot. Now it says "Reboot and select proper boot device or insert boot media in selected boot device and press a key". Does anyone have any insight?

A:check disk is giving me "File record segement xxxxx is unreadable"

So I threw in my windows 7 CD to try and repair the startup, but it didn't work. Now the computer rebooted and is going through check disk again. I already switched the SATA ports on the motherboard. Is there anything anyone can suggest?

4 more replies