Tech Problem Aggregator

Cannot delete "windows" and "program files" from old hdd

Q: Cannot delete "windows" and "program files" from old hdd

Hi,
I recently installed a new ssd and did a fresh install of windows 8.1 on it. I am now using my old hdd as my main data drive in my laptop caddy. My problem is I did not back up my data on my hdd and format it. So I need to delete the "windows" , "program files" and "program files (x86) " folders from that hdd to free up some space.
I understand I have to give ownership to those folders for me to be able to do delete the folders. I have tired the methods suggested by this guide Take Ownership of a File, Folder, Drive, or Registry Key in Windows 8

I tried both of those commands





(To grant currently logged on user ownership of)

takeown /F "full path of folder or drive" /R /D Y


(To grant administrators group ownership of)

takeown /F "full path of folder or drive" /A /R /D Y





and it was succesful, however I still couldn't delete the folders. I would appreciate if anyone could enlighten me.

A: Cannot delete "windows" and "program files" from old hdd

A lot is protected by trusted installer. I do that kind of thing with a win7 winpe disc/usb. I have a special driver which ignores permissions and gives complete control.

2 more replies
Answer Match 123.9%

i've been relying on going to "internet options","general" and "delete" then ticking all the boxes on that page..i found out that by doing this,my temporary internet file swere NOT being deleted.is this a vista problem? my pc came to a complete sludge of a slow down today and i found that my internet files folder had files going back a year that hadn't been deleted as i've been relying on ticking those boxes..i had tons and tons of and tons of files.i'm wondering if this is the norm and also is it possible that other files are not being deleted when using that method? if so,then i probably have folders that are totally loaded with trash.
 

A:Solved: Had to delete temp internet files by "view files" ,"select all" ,"delete"

Have you ever unticked Preserve Favorites website data?
 

1 more replies
Answer Match 119.4%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Answer Match 117.9%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Answer Match 117.9%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Answer Match 114.9%

Computer infected with "Phoenix Toolkit Website 4" rootkit/trojan virus identified by both Norton Anti-Virus and Webroot SecureAnywhere. Although the computer is having no symptoms of spyware (besides the search engine highjacking that no longer occurs) messages of blocked threats continuously pop up from Norton Anti-Virus.

Windows 7 Ultimate
Intel i7 860 CPU
8.00 GB DDR3

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:01:58 AM, on 12/26/2011
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16421)
Boot mode: Normal
Running processes:
C:\Program Files (x86)\Norton AntiVirus\Engine\17.9.0.12\ccSvcHst.exe
C:\Program Files (x86)\Ralink\Common\RaUI.exe
C:\Program Files (x86)\iMesh Applications\MediaBar\Datamngr\datamngrUI.exe
C:\Program Files (x86)\LP\4919\93C.exe
C:\Program Files (x86)\Real\RealPlayer\Update\realsched.exe
C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe
C:\Program Files (x86)\73949\lvvm.exe
C:\Program Files (x86)\BitTorrent\BitTorrent.exe
C:\Program Files\Webroot\WRSA.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Norton AntiVirus\Engine\17.9.0.12\MCUI32.EXE
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Users\Zohair Razvi\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\2HOUF0NM\HijackThis.exe
R1 - HKCU\Software\Microsoft\... Read more

More replies
Answer Match 114.6%

every time i try to open one of this folders a window apears with this content
cant have acces to C:\Documents and Settings\Mike\Local Configuration\{one of these folders} acces denied
this affects my IE i cant download nothing thru IE all my files on that locations i cant set dispaly pictures on WINDOWS LIVE messenger and all thinks that has anything to do with those folders
any suggsestions or idea
hope you can help me
pd ive scanned my computer and its all clean also i cant install windows XP serivce pack 2 im kinda stucked :/
 

A:cant open "temprorary files" "aplication data" "program data"

11 more replies
Answer Match 113.7%

This is not really a problem, more like a nerdy technical question, since I like being informed about the goings-on in my PC. I hope I posted it in the right section, since IMVU would probably fall more under "game" than anything else.

I have always been curious as to why would the developers of the chat client IMVU decide to have the program install within C:\Users\[username]\AppData\Roaming\IMVUClient (previous versions did so under "Documents and Settings") instead of "Program Files" or "Program Files (x86)" on Windows... I am also curious if this unconventional choice could potentially make my PC vulnerable to attacks.

Now, the program works fine AFAIK, but I'm puzzled by this. I'm the kind of user who likes having the choice of installing apps in a drive other than C: (to free space in C:, for portability, etc.), and who gets nervous when apps do not install or behave the way that I'm used to.

I was told by someone more knowledgeable than me that it was probably a lazy way to get around administrative install rights in Windows Vista and Windows 7. He also added that the cache data of the program shouldn't be in Roaming when there is no upper limit or even default size set on it.

And yes, this has been asked on their forums, but no staff member ever answered it (only a forum mod, who didn't have a clue).

Any ideas? Or am I being overly paranoid?

Ed.
 

A:IMVU Installed in "AppData\Roaming" instead of "Program Files"

7 more replies
Answer Match 111.9%

Okay, so apparently my "Programmer" folder on C:\ changed to "Program Files". I live in Denmark, so the system is danish. The folder "Program Files" used to be named "Programmer", but somehow it changed to "Program files". It is weird, becuase that my other x86 folder is still named "Programmer (86)". It's kinda annoying, please help me somebody!!!
Can anybody give me some tips and tricks, on how to rename it back?

I would be really happy!

THANKS!!!

A:The folder "Programmer" changed to "Program Files" HELP!!!

When i click "Rename" and i rename the folder to "Programmer", the folder automaticly renmaes itself to "Program Files"!!!
HEEELP

12 more replies
Answer Match 111.6%

The subject message pops up any time I attempt to open my IE8 browser using Windows XP and set to my home page "ATT.Yahoo". When I click "OK" in the message, IE closes and tries to recover, but with the same results each time. I know
there is a method to reset IE9, but can't tell if it also pertains to IE8 since it can't be opened.

A:"Microsoft Visual C++ Runtime Library" "Runtime Error! Program: C:Program Files\Internet Explorer\iexplore.exe"

Hi,
the first step in troubleshooting IE issues is to test in noAddons Mode.
toolbars.google.com - download and install the latest IE compatible version of the Google Toolbar.
for consumer help with IE select the Help>Online Support menu from IE and follow the prompts for your windows and IE versions. thx.Rob^_^

3 more replies
Answer Match 110.1%

Ok, so basically, whenever I turn the computer on, 3 error messages appear:

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee.exe

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee1.exe

- Error loading H:/Archiv~/GBPLUG~/gbiehcef.dll. Couldn't find specific module.

(sorry if some terms are incorrect, my computer is in Spanish, to I tried to translate as best as possible)

Please help me solve this terrible problem, it is really getting me on my nerves! (oh, and if this helps, I've recently donwloaded this so called "Limewire acceleration", and whenever I ran the setup, it didn't work. I don't really remember the name of the website I downloaded it from, sorry...)

A:Can't Open "My Documents", "Trash" or other files in "My Computer"!?

Hi and Welcome to the forum

I am almost certain that you have malware problems. Most like caused by you doing file sharing/ P2P - Limewire.

Suggest that you go here and follow the directions:

http://www.techsupportforum.com/secu...oval-help.html

Please be advised that the malware people are very busy and it could take a couple days to assist you.

BG

1 more replies
Answer Match 109.5%

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
pc's on - booting - then "Windows Loading Files" - restart
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

A:"Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies
Answer Match 108.3%

Hi all

Just joined the forum J

I have just upgraded to Windows 7 64 bit and I notice that after installation I now have two program File directorys. One called ?Program Files? and the other ?Program Files (x86).

Do I need both or can I delete the ?Program Files? one which I am guessing is the old 32 bit stuff.

By way of further information: I started out with Windows XP installed. I then did a upgrade install of windows 7 32 bit. I then decided to go 64 bit so I used the custom/fresh install option of the 64 bit upgrade which has left me with this possibly redundant ?Program Files? directory.

Any help of suggestions would be great.

Thanks in advance

Kenny

A:Win7 64bit installed can i now delete the extra "Program files" dir?

No, its still needed and anyway the system wont let you do it.

3 more replies
Answer Match 108.3%

What I want is a simple answer. Failing that, an answer that is not too complicated.
In my line of work, I am continually installing and reinstalling Windows and, on top, client-specified applications.
Ever since I went over to Windows x64; first, version 7; then 8, now 8.1, I have had recurring niggles and problems.
Initially, I always went with the suggested default installation base folder, which, for all the older 32 bit applications was, and still is: "C:\Program Files (x86)"
I continued accepting this default location, after I upgraded to Windows 8, and yes, with 8.1.
Now, I don't remember exactly when the very first niggles got me scratching my head but it started, so far as far as I can remember anyway: When an application that I had installed, could not find its associated icon because, according to the shortcut, it could not be found in its default location: "C:\Program Files\...". Of course it couldn't! The program in question, take your pick: Opera and Thunderbird, (Yes, I know they're both from the same place), was installed in "C:\Programs Files (x86)\" but the shortcut was looking for the associated icon in "C:\Program Files"! Now, yes, I know, that all 32 bit programs are, by default, installed to "C:\Programs and Files (x86)". This is easy to understand and explain: it separates all those 32 bit applications from their superior 64 bit brethren.
NOW WE'RE GETTING TO THE MEAT SO WAKE UP.
I have since adopted the... Read more

A:Windows 7, 8 64 bit "C:\Program Files (x86)" or "C:\Progra

A bit of a Google brought me to this:

Why Does 64-Bit Windows Need a Separate ?Program Files (x86)? Folder?

Basically....consequences are unlikely.

2 more replies
Answer Match 108.3%

Below is the scan results from hijak this. Please let me kknow which ones are safe to delete

Logfile of HijackThis v1.97.7
Scan saved at 11:35:27 AM, on 10/17/04
Platform: Windows 98 SE (Win9x 4.10.2222A)
MSIE: Internet Explorer v5.00 (5.00.2614.3500)

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = file://C:\WINDOWS\TEMP\sp.html
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = file://C:\WINDOWS\TEMP\sp.html
R1 - HKCU\Software\Microsoft\Internet Explorer\Search,SearchAssistant = file://C:\WINDOWS\TEMP\sp.html
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Bar = file://C:\WINDOWS\TEMP\sp.html
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = file://C:\WINDOWS\TEMP\sp.html
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = file://C:\WINDOWS\TEMP\sp.html
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Window Title = Internet Explorer Provided by SHAW Internet
R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,ProxyServer = proxy:8080
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,HomeOldSP = about:blank
O2 - BHO: (no name) - {53707962-6F74-2D53-2644-206D7942484F} - C:\Program Files\Spybot - Search & Destroy\SDHelper.dll
O2 - BHO: (no name) - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\PROGRAM FILES\ADOBE\ACROBAT 5.0\READER\ACTIVEX\ACROIEHELPER.OCX
O2 - BHO: (no name) - {4A39BCA8-1B7D-11D9-8441-0050F4EA08A0} - C:\WINDOWS\SYSTEM\COH.DLL
O3 - Toolbar: &Radio - {8E... Read more

A:help! need to determine which files are ok to delete on the "hijak this" program scan

6 more replies
Answer Match 107.7%

Hi. I'm thinking about repairing Windows 7Home Premium 32bit with the DVD, because of BSOD, but I hesitate.

I first need to know if the backup folder called "Windows.old" will be a COPY (keeps Date Modified but updates Date Created) or a CUT (simply moves all folders to an other, thus doesn't change Date Created). Thanks!
So of course, only those who have ever reinstalled Windows 7 may know the answer. If you don't know but have reinstalled Windows 7 at least once, please spare 30 seconds to check, simply find a file like a picture or music that you had before the reinstall, and see in the bottom bar of explorer if its Date Created is the original or the reinstall date. You can also click Display tab in Explorer, then Sort by > Others > check "Date Created", > OK > Click display again > Sort by > Date Created. Don't mistake with Date Modified, I know the original Date Modified is kept upon copying, but it will update if you modify the file obviously. Please be honest and double check, losing 5.9 years old dates of my past would be heartbreaking, like mixing the pages of my diary!

Date Created is very important to me (and is underrated because it's not the default sorting option unlike Name/Type/Date Modified) because my computer is 5.9 years old, now has thousands of files and folders and it's easy to find them back and organize them with Date Created sorting if I didn't write tags or description in the file name.
If it doesn't ke... Read more

More replies
Answer Match 107.7%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Answer Match 107.4%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Answer Match 107.4%

Hi guys !!

Before hand pls. forgive my english not my first language, I'll try my best and thank you for any help and pls. forgive my ignorance at this respect

Ok my trouble is this, I tried to Add information to a CD-RW rewritable disc memorex 650MB-74 mins.
But it says its was full, well I try to right click on it and delete the file, but it didn't let me a error message appeared saying:

"Cannot delete the Files on this CD are read only. You can still copy new files to this writable CD, wich will replace files already on the disc "

Well so .... I try to do that "again" But NO GO !!!
I tried and it display a message saying that the discs is full again .

The capacity of the rewritable disc is of 650 MB, the new file to add it's about 200 MB and the existent file on disc is just 2.69 !!! so...? is not full at the capacity of the disc.
It says to insert a writable discs as well !!

Ok ...well ...so I tried to delete the file with a 3rth party app.

So I try to use NERO to delete the rewritable disc....
I place the disc.... select delete a cd/dvd rw disc.... then option of quick delete or full delete appears.... but, NERO doesn't even recognize it as a rewritable disc !!!
What do I'm missing here ?
Is there an application that can DELETE the data "files and folders" from a Rewritable disc?

same thing with Ashampoo ... cant delete the rewritable disc

I already tried this applications that claimed they can de... Read more

A:Solved: Can't delete CD-RW discs error "read only files""

16 more replies
Answer Match 107.1%

Hello

how can I delete "saved password" and "form data" of microsoft
edge manually ?!

after too much search in google ....

I trid to delete some value of the following registry address
HKEY_CURRENT_USER\SOFTWARE\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppContainer\Storage\microsoft.microsoftedge_8wek yb3d8bbwe\MicrosoftEdge\

also I tried to delete some files in the following folder
%LocalAppData%\Packages\Microsoft.MicrosoftEdge_8wekyb3d8bbwe\

and finally I could not find the way ...!!!

please help !

A:delete "saved password" and "form data" from microsoft edge manually

Hi,
Welcome to the forums, go to settings (... dots from top right), click view Advanced settings and "Manage Saved Passwords".
HTH.

0 more replies
Answer Match 106.8%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Answer Match 106.5%

Greetings.
So, I would like to remove "Paste shortcut" and "Undo delete" from the right-click desktop menu.
Wasn't able to locate either in the registry.

More replies
Answer Match 106.2%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Answer Match 106.2%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Answer Match 105.9%

Greetings!

I have an XP machine which I only ever user myself (as in, there are no other users on the machine, no guest account, and it logs in without a password).

I'm trying to sort out my expansive and bloated Start Menu Programs list, but it seems that there are two separate lists. One for "Joe" (the main user account) and one for "all users", I guess because some programs give the option of installing for just one user or for everyone.

All of the programs show up in the Start Menu when I click on it, but when I go into Windows Explorer to try and sort them out, there are two separate folders;

C:\Documents and Settings\All Users\Start Menu\Programs
C:\Documents and Settings\Joe\Start Menu\Programs

I know I can move them around in these folders (ie; putting them in related groups, such as "system tools" etc), but can I move all of them from the main user to the "all users" folder, (or vice versa) without any problems?

Thanks!
~Joe

A:[SOLVED] Merging "user" and "all users" start menu program lists

Yes, you can consolidate them all in one, or slit them up as desired.

1 more replies
Answer Match 105.9%

Hi every one,
I have Intel "DG31" and "core 2 do"
Program hangs, when i try to open or save as a file In "excel-2003" and "corel draw9" and "WILCOM Es9"
and in task manager it shows ?not responding?
But when i try to open it by clicking on the file using windows explorer it works quite well.
Earlier i used same programes on the "865glc" and "2.4" there was no problem,
I have also tried many Intel computers to trace the problem
i found the problem on every computer that was build on the motherboard later then Intel 865
Now what to do?
Mohammad Imran

More replies
Answer Match 105.9%

I am running Windows 7 on an iMac with VMware Fusion. Everything was fine for three months. Then slowly, problems started showing up. A notice would come up saying that Windows Explorer wasn't working and needed to close. (re-booted) So far, it is still only occasionally.

Then the screen size display began to change EVERY time Windows was restarted. The change was to a different size each time. (changed it back) It is getting to be a real pain!

Now the "My Computer" screen only works occasionally.(in the beginning, I rebooted. Now that doesn't help) When it doesn't work - the box is mostly blank with a horizontal "thermometer" where the words "my computer belong" slowly moving across the top. Even when the line is filled, the "my computer" screen doesn't fill in. When I do get a screen, I am only able to move files or folders for a short time. After that, I get a square when clicked on says "calculating" - and it never finishes. This happens with moving many, or only two or three files. I am also unable to click and highlight several random files with the control key held. This also happens with the recycle bin. I am unable to delete the files there.

I have a 3.06 GHz Intel Core 2 Duo with 4GB 800 MHz I use three different registry cleaners (had lots of problems before Windows7 and am not too happy with 7) and a Malware program. I have a software program that offers a repair feature on its disc. Is ther... Read more

More replies
Answer Match 105.9%

Without quotes, no extension. Anyone know what they are and if they're legit?

Thanks.

A:My c:\windows folder has a couple of strange files: "D" and "@#"

They dont see legit to me. Try to do a virus search. Otherwise i recommend factory reset

9 more replies
Answer Match 105.6%

Afternoon, I'm a bit boggled by this issue we are having on a PC at our office. It seems that the PC normally will boot up and the memory usage will be low 2 GB / 16 GB until 10-12 minutes go by then it shoots up 11 GB / 16 GB. It's really odd and I can't explain it, since no applications are started.

I took it upon myself and downloaded RamMap. Using RamMap I was able to determine that the memory is caused by "mapped files" under "file summary" I can see the two large files which are to blame. But I'm not able delete these currently until tomorrow to confirm the user doesn't need them.

What I'm looking for is an answer as to why these files seem to be singled out? Thanks in advance. I've included a screenshot to the RamMap findings and my understanding with how memory is handled is limited.

EDIT - I can see now only 1 large file is being selected for "mapped file".

A:Windows 7 Large files stuck in "mapped files" / "stand-by"

Attachments -

1 more replies
Answer Match 105%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Answer Match 104.7%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Answer Match 104.4%

Hi all,

I'm puzzling this one. In the folder options when I choose 'view' the radio button to show the hidden files is missing. I've already checked the registry at the HKLM/Software/Microsoft/Windows/CurrentVersion/Explorer/Advanced/Hidden

and everything seems ok (value for 'Type' is 'group' etc.). Using the XP tweak (Kelly's corner #155) shows the hidden files, but the button still missing.

Another thing that I encountered with was that from the start menu the "Help and Support" not working. Again, the registry seems fine, and the process is activated (started). This came up when I tried to use system restore option - with no success.

Virus scan didn't find alerts of any kind

To make a long story short- below is the log file of HiJackThis. Please review it and reply if you see something to be concerned with for repairing my computer.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 14:36:54, on 21-Dec-08
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16762)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Network Associates\Common Framework\FrameworkService.exe
C:\Program Files\McAf... Read more

A:missing "show hidden files" button + "Help and Support" not working from start menu

Ok I found the answer (after quite a lot searching), as follows:

1. for the 'Hidden files' radio button - I used methods 1 and 2 from here-
http://www.technize.com/2007/05/13/s...s-not-working/

2. for the helpcenter I just reinstalled it as described here -
http://windowsxp.mvps.org/rebuildhelp.htm
note that the file 'dataspec.xml' is needed to be available for this, and it can't be done directly from the XP CD. The thing that worked for me was to insert the XP CD, and use the file that in my computer (C:\) and afterwards another file on the CD.

Again, all this happened with no virus detection, so I believe that there is no infection. However, if someone has remarks on the HiJackThis log I've put, feel free to add them.

Have a nice day,

Fitch.

1 more replies
Answer Match 104.1%

Good Morning,

I would like to introduce myself. I am new to the forum. Should I address an issue inappropriately, kindly alert me.

Most recently, I have experienced multiple PC issues. Recently, I performed a System Recovery and encountered the following ?

1. Cannot perform a SYSTEM RESTORE. The message is: ?Restoration Incomplete. Your computer cannot be restored."

2. When I booted up this morning, and DID NOT HAVE A DESKTOP.
The screen was blank ? no Icons.

3. The items below are APPEARING IN MY TEMP FOLDER, and are located at: C:\DOCUME~1\COMPAQ~1\LOCALS~1\Temp:

........a. 415303181927525125.tmp
......... plus similar numbers.

........b. IswTmp
........c. msohtmlclip1
........d. msohtmlclip

I delete the above items through safe mode but they re-appear.
** I am MOST CONCERNED ABOUT Items 1 & 2.

SYSTEM SPECIFICATION:

? (DESKTOP PC) Windows XP
? (SP3) HP Compaq Presario 061 - Media Center Edition,
? AMD Athlon (m) 64 Processor / (X 86-Based PC - 32-bit package)
? MOTHERBOARD Chipset - ATI RADEON XPRESS 200 CHIPSET
? Version 5.1 / 2600 Build Processor

** If someone would give me some feedback, I would appreciate it tremendously.
** THANKS IN ADVANCE.

Kind regards,
AJ

A:NO DESKTOP after booting up & SYSTEM RESTORE "Incomplete" & "Strange" Temp Files

Usually when the machine has a "blank" desktop, the boot/startup process has been interupted or is frozen to before Explorer is launched.

You can launch Explorer manually be navigating C:\Windows and double-clicking "Explorer".

If successful, do the following:

Start>Run>(type) "msconfig" and turn off all non-MS services and all startups.

Then, Start>Run>(type) "cmd", and at the command prompt type "chkdsk /f" and schedule a chkdsk to run on next reboot.

Reboot system and report results.

3 more replies
Answer Match 103.8%

System - Windows 7 Home Premium - 64 bit
After Mcafee scan shows: 2 "unresolved issues". They are 1. Generic PUP.x!ct 2. Generic PUP.z!ca. Mcafee says under "potentially unwanted programs" that they were "unable to delete" these malware programs. What are they and are they harmful to my system? How do I remove them if necessary? I am a bit of a novice so thanks for the help. THX, SK
 

A:"Generic PUP.z!ca" & "Generic PUP.x!ct" Mcafee - "unable to delete" after scan

Hi there.

Those are most probably false positives. What files are being detected as such?

When something is labeled "Generic" it means that McAfee doesn't know what it is but that it looks like something else it knows about.
 

3 more replies
Answer Match 103.8%

Is there any way to delete these system folders.

I don't use them, and I never will. If I delete them though, they are simply re-created.

Thanks

A:Delete "Camera Roll" & "Saved Pictures" - Win 10

Why do you feel the need to delete them? Just ignore them as deleting system folders can be problematic although it seems win 10 has a way of defeating the deleters!

20 more replies
Answer Match 103.8%

With XP's Outlook Express-
When you'd delete email from their Folders, they weren't "completely deleted..." until you Compacted Databases & Reboot (without CD, OE would Not release from backup..., and Bloat...!).
~~~~

Q1?- I now use WLM 2009 POP3/only (I like 2009's GUI, Much better than 2012), and wondered if I needed to regularly Compact Databases for "complete delete...", like I did with OE?

Q2?-If WLM's CD is the same as OE, how often should I schedule CD?

A:Does WLM "completely" delete email without "Compact Datadases"?

I also like and use WLM 2009. It depends how your mail accounts are set. My Gmail is archived when accessed by POP, My AOL mail is left on the server.
This is how my settings are.

3 more replies
Answer Match 103.5%

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

A:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

9 more replies
Answer Match 103.5%

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

More replies
Answer Match 103.5%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Answer Match 103.5%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Answer Match 103.5%

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

6 more replies
Answer Match 103.2%

Hello,

I've scanned my laptop with SFC four times in this past week, and each scan ended with the same failure to repair specific files. I'm uncertain how to proceed with these corrupted files.

I followed the instructions in the SFC /SCANNOW tutorial; I installed the System Update Readiness Tool (CheckSUR in attachments) after running SFC three times and it managed to find and fix some sort of error. However, the results seem to be the same in the new SFC scan logs.

I also tried obtaining a .iso of Windows 7 home premium from Microsoft's website (Access Denied) to run a repair install, but it will not accept my product key due to it being a pre-installation provided by Samsung.

I do not have a Windows 7 installation disc so I cannot manually replace them like the tutorial suggests.
Also, I don't know if this is relevant or not, but I ran the WindowsUpdateDiagnostic.diagcab troubleshooter several times as well (dism.txt is in attachments). Every single time it says that two problems were found:
1. Problems installing recent updates (Not fixed)
2. Service registration is missing or corrupt (Fixed)

Additionally, I've recently noticed that my free hard drive space has been decreasing rapidly. In the past two days, it has decreased by 2 or 3 GB, despite not downloading or installing anything. Is this related to my current problem with the corrupted files or something else? I don't know how to find what's eating up my storage space.

Any advice is appreciated,

Thanks.

More replies
Answer Match 103.2%

hi every body
My PC has lots of files called "Thumbs.db" & "System volume information" in all its drives.I cant delete these files and I think the cause of shutting my pc down automatically and showing blue screen is these files.the operating system is win xp/sp2.
I don't know what to do with these and what anti virus will delete them.please help me.
thanks
 

More replies
Answer Match 103.2%

Hi,

I am running Windows 7, 64 bit.

This is the problem. When searching a folder, I am looking for all .cfg files. I can see at least 4 .cfg files in the folder, however, when I search *.cfg, it comes up with no results. I know this is not an error in Windows, and I feel as if I am overlooking something simple.

I see that .cfg files are tagged as "configuration" files and I assume Windows is trying to protect me. In reality, in this specific folder, these are broken files/un-completed download files from my download manager, Gigaget. I just want to remove these files in a specifc folder I have set up to house incoming downloads, so there's no risk of deleting anything important that my system would need.

Does anyone know how to rectify this dilemma.

Thanks in advance,
Chris
 

A:"Search" function in Windows 7 "not seeing" files

7 more replies
Answer Match 103.2%

Hey Friends,

I guess its not only me having this, is it? Many of us have it right? so whats the thing which brings up this dialog box > Scan and Fix /or/ Continue without scanning > when you connect an external device to your computer?
i had some time some bad day of mine when i clicked on the Scan and Fix and the result was the windows converted a very large number of my files into .CHK files hidden in the HDD!! and i still cannot find a way to recover those most most important files of mine (they are text files). I did recover a large bundle of files, but not the ones i actually needed more than anything! those text files. i have gone through literally 30,000 files and recovered almost everything > videos, movies, images, and messed up bits of large installation files of softwares like AE broken down to many many small pieces... but that doesnt matter! that stuff can be recovered (softwares and movies and songs) but the text files are still among those .CHK files i have which are still more than 10,000.

Anyone have anything regarding this is more than Welcome to share their Knowledge.
Thanks.

A:Windows "Scan and Fix Dialog Box" and ".CHK Files"

Sounds like checkdisk is running and finding a problem with a hard drive and attempting a repair

3 more replies
Answer Match 102.9%

"A problem caused [name of program] to stop working correctly. Windows will close the program and notify you if a solution is available." But no solution shows. I have been using the same HP Pavilion tx1000 for a year and a half with no software or compatibility issues. I run Vista Home Premium, Service Pack 1 - 32 bit. Slowly this message began to appear with every microsoft program I opened and then started to spread to non microsoft programs. I tried reinstalling the programs, doing a system restore to the oldest restore point I could, I also tried uninstalling any window updates that were installed right before my problems. I have read some strings that indicate it may be a compatibility issue between the service pack 1 and vista but the service pack came with the computer and it has been working fine until recently. I am at loss what to try next. Has anyone using Vista Home Home Premium experience anything like this!!!
 

A:Windows Error Message "{Name of Program} has stopped working" "A Problem caused ...

hi and welcome the first thing to do is run your anti virus and malware progs this will check for issues there and hopefully rule it out the next thing to try is sfc/scnw http://www.vistax64.com/tutorials/66978-system-files-sfc-command.html its a how to and also try this http://searchenterprisedesktop.techtarget.com/generic/0,295582,sid192_gci1276029,00.html this will check for other problems in both your files and your hard drive
 

1 more replies
Answer Match 102.9%

hi. i'm new here. nice to meet all of you!
just like a lot of folks i'm sure, i've come here because there are some weird things running on my pc that shouldnt be in there.
please help!!!!!!

heres the hijack log
(thanks in advance. i don't know much about this computer virus stuff.)
~eric

Logfile of HijackThis v1.99.1
Scan saved at 10:06:40 AM, on 9/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Dantz\Retrospect\retrorun.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\ZoneLabs\vsmon.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\SYSTEM32\qttask.exe
C:\Program Files\Java\jre1.5.0_01\bin\jusched.exe
C:\PROGRA~1\VERIZO~1\HELPSU~1\VERIZO~1.EXE
C:\PROGRA~1\VERIZO~1\HELPSU~1\SMARTB~1\MotiveSB.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\PROGRA~1\Sony\SONICS~1\SsAAD.exe
C:\Program Files\Common Files\Verizon Online\ConnMgr\cmisrv.exe
C:\Program Files\Windows Media Components\Encoder\Wmencagt.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\ZoneLabs\isafe.exe
C:\Program Files\Common Files\Verizon Online\AppMgr\vz... Read more

A:"windows no disk" and "winsilly" "win956temp"

11 more replies
Answer Match 102.6%

I have Windows XP Pro., sp3.

When you install a new program, what determines where it is listed: All Users>Start Menu>Programs or "user name">Start Menu>Programs?

reoneill
 

A:What determines if a program is installed under "All Users" or "user name"?

Usually some of the programs give you an option to install it under your user name or for all users during the setup process. So say if I was installing (CVTae) a resume programming on a Windows XP computer it will after the installation process ask me if I want to install it as all users (so it will show up on the all users start menu so everyone can see it) or just for me. That's where you can decide for yourself where you want to install it.

'So usually it's the user's choice of where it's listed in most cases, but certainly not in all cases.

Hope that helps mate.
Dan
 

1 more replies
Answer Match 102.6%

I was looking at these freeware AntiVirus program's to replace InoculateIt. The Company is ending InoculateIt support in May.
:
"Avast!" (ALWIL Software); "AVG" (Grisoft)
:
Both seem to get pretty good ratings, and I was thinking of getting one of them, then getting Norton AntiVirus when I have the extra $$$ available.
:
Any opinion's as to their ability to stop unwanted stuff from getting in, ease of setup & use would be appreciated.
One thing I've noticed is AVG only issues updates monthly--and I think Avast! is the same--is this often enough to effectively defend against new virii?
:
Will be using whichever one I get with ZoneAlarm (Freeware) Version 2.6.231
 

A:"Avast!" and "AVG" Anti-Virus program's. Opinion's?

7 more replies
Answer Match 102.6%

I went to the following link (from the "Please read here first..." thread) http://thespykiller.co.uk/index.php?action=tpmod;dl=item10 but was unable to find a download for "hijack this". Does anyone have an alternative link to find Hijack this?

Thank you

EDITED:

A message appeared saying this website wants to run 'ietag.dll' from Microsoft Corp. Is that ok?

P.S. The problem is an increadibly SLOW start up time and "fairly" frequent freezing of the screen (enough to be very frustrating). The computer never goes into hibernate either and I've set it up to do so numerous times. Sometimes, after clicking the IE icon, nothing happens until I click it again a few minutes later. However, it then opens up 2-3 IE windows instead of the original one that I wanted.

I can't get a hijack this log because I can't find the hijack this download. Does the download via the described link, show up for other people?

Dell Dimension DV051
Intel P4 2.8GHz
2.79GHz, 504MB RAM
Windows XP Media Center 2002 SP3
 

A:Can't get "hijack this" program from link in "Please read here.." thread. Help please

Found & ran the program with the following results: (P.S. I realize you're all busy so please don't take this the wrong way --> It looks like the "Please read here first..." thread needs updating).

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 3:34:57 PM, on 6/2/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\ehome\ehtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\iaanotif.exe
C:\Program Files\CyberLink\PowerDVD\DVDLauncher.exe
C:\WINDOWS\system32\dla\tfswctrl.exe
C:\Program Files\Common Files\InstallShield\UpdateService\issch.exe
C:\Program Files\Dell Photo AIO Printer 924\dlccmon.exe
C:\Program Files\McAfee.com\Agent\mcagent.exe
C:\Program Files\Yahoo!\Search Protection\SearchProtection.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files\Digital Line Detect\DLG.exe
C:\Program Files\McAfee Security Scan\2.0.18... Read more

1 more replies
Answer Match 102.6%

Listened to a french music website streaming new music. Afterwards, computer seized, 2 shortcuts added to desktop, default homepage reset. Upon trying to open new IE window, firewall requests to use Internet Explorer as a server. Try to open email, received the captioned DLL error messag.

Tried to shut down and reboot, received same DLL error message when trying to open IE and MS Outlook.

I'm running WindowsME, MS Outlook 2000 SR-1.

How do I go about restoring the computer to 7pm last evening before all these issues?

I'm also curious as to why Norton Antivirus and Zone Alarm did not detect this activity.

Help!
 

A:"COMCTL32.DLL Cannot Start" - "Error Starting Program"

16 more replies
Answer Match 102.3%

Hi, I've looked all over the internet in attempt to find a solution to a problem that's just affected my computer, and I haven't been able to find anything that relates specifically to the problem I'm encountering.

This hit my computer without warning, I switched it on this morning and it worked as normal, all of a sudden things started to freeze up. I restarted the computer, and now a lot of programs are refusing to open - Microsoft Office, among others, states "Error: There Are No More Files", whilst other programs such as Google Chrome and Internet Explorer state "Attempt to Access From Invalid Address", even when I am running them from their root folders.

I am running a Dell Latitude 830 with Intel Core 2 Duo T7250 (2.00GHz, 2M L2 Cache, 800MHz) Dual Core, 1.0GB, DDR2-667 SDRAM, 2 DIMMS, Intel Integrated Graphics Media Accelerator X3100 and am obviously using Windows XP. I have scanned my system with Avast Antivirus, which didn't state that there were any viruses, so I am stuck as to what exactly the problem is.

I'd really appreciate some help in figuring out what has happened, thankyou so much for your time in reading this!

A:"There Are No More Files"/"Attempt To Access From Invalid Address" Issue

I am having the same problem on the same exact hardware. i don't think it could be a hardware issue, but i could be wrong. i have tried repairing windows with no success. i'm thinking the only option is to reinstall windows completely.

13 more replies
Answer Match 102.3%

HI, first of all, I found out that my home computer was infected by the lovelorn worm. Plan to clean that tonight.

Secondly, I found copies of 2 files named "folder" and "desktop" in almost all folders. The files where identical so I suspect that there is a virus that's propagating this. Is my hunch correct? Is this related to the lovelorn virus or is it another kind? What should I do?

Thanks!!!
 

A:files named "folder" & "desktop" in all directories.. is this a virus???

Symantec site you may want to review. I don't see anything about the file replication you are experiencing but the site may be helpful to you.
 

1 more replies
Answer Match 102.3%

Hi

New installation of windows 7 ultimate 32bit and on trying to copy a 38gb folder from c drive to d drive, pc gives bsod.
Lately playing world of tanks is resulting in system lock ups,please can anyone help

Frosty

A:bsod copying files from "c" to "d" drive and system lock ups

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

2 more replies
Answer Match 102.3%

Hi, I've hit a problem with Windows XP, I've looked around and I haven't been able to find anywhere which offers a potential solution, so I really hope somebody here can help!

This hit my computer without warning, I switched it on this morning and it worked as normal, I was using Google Chrome, in order to browse websites that were free of spyware (the Guardian at time of crash) all of a sudden things started to freeze up. I restarted the computer, and now a lot of programs are refusing to open - Microsoft Office, among others, states "Error: There Are No More Files", whilst other programs such as Google Chrome and Internet Explorer state "Attempt to Access From Invalid Address", even when I am running them from their root folders.

As I've stated I am running a Dell Latitude 830 with Intel Core 2 Duo T7250 (2.00GHz, 2M L2 Cache, 800MHz) Dual Core, 1.0GB, DDR2-667 SDRAM, 2 DIMMS, Intel Integrated Graphics Media Accelerator X3100 and am obviously using Windows XP. I have scanned my system with Avast Antivirus, which didn't state that there were any viruses, so I am stuck as to what exactly the problem is.

Thanks for reading! I really hope that somebody can help..
 

A:"There Are No More Files"/"Attempt To Access From Invalid Address" Issue

8 more replies
Answer Match 101.7%

Ok this is a problem i just noticed, have no idea how long it's been happening. But I noticed it when I was downloading a program off bittorrent, but the torrent was dead so i closed it. Then went to delete the 0 byte exe file but coudn't... explorer had open hadles to it and wouldn't let me. It gave me the "Cannot delete file: it is being used by another person or program. Close any programs that may be using the file and try again." error. After much head scratching, I found that I could read and write to the file but couldn't delete, rename or move it. restarting explorer or the whole computer didn't work.
Finally, I took a real exe, made a copy of it, named the copy the exact name of the offending exe file then moved the copy into the folder with the offending exe file thus overwriting the 0 byte exe file with a real exe. after killing explorer and restarting it to close its open handles to the file, i could then delete the file.

and it's not just a one time thing. I can right click on the desktop, and create a new text document, and have "New Text Document.txt" which I can delete fine, but if I rename it to "New Text Document.exe" I can't delete it anymore!

Anybody hear of anythig like this? It's a new one for me.

I've of course already ran Adaware, trial ver NOD32, Housecall, and Hijackthis and all come back clean.

my hijackthis log for the curious,
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1218 AM, on 10/27/200... Read more

More replies
Answer Match 101.4%

I am running Windows 7 Home Premium on an Acer Aspire On 722-C62KK.

I wasn't thinking and instead of uninstalling Egistec Shredder (preloaded crap, thanks acer) I tried to delete the whole folder "Egistec Shredder" in Program Files (x86) . It deleted all the key components and applications, installers, and uninstallers. Now under the 'Egistec shredder' folder, I'm left with one folder called 'x64' and then in that folder 3 .dll files that cannot be deleted because "they are open in windows explorer. I have tried everything! Shredder does not show up in the Control panel uninstall programs window anymore, probably because I deleted most of it. I have tried exiting out of windows explorer and using a different explorer, still won't let me delete. I've tried deleting in safe mode, still won't delete. I tried to download the entire program again, and it said the existing program on your computer is preventing from downloading it again. I'm at my wits end! HELP!

A:Can't delete .dll files "open in windows explorer"

You could try de-registering the dlls.

regsvr32 -u <path>\<filename>.dll

1 more replies
Answer Match 101.4%

Hi,

I've installed Windows 7 from fresh again, and was able to delete a good portion of the contents of the Windows.old folder.

However there is still some SecureRom files inside of it that when I try to delete them, it simply says they don't exist. So it won't let me delete the Windows.old folder because of those files.

I tried the SecureRom remover tool but it can't remove them since they are from an old Windows 7 installation that must have been installed when I installed some game that uses SecureRom.

Any clue how to get rid of them so that I can finally delete the dang Windows.old folder?

A:How to delete "Windows.old" when it still has SecureRom files/folders

Well found out how, so if anybody else has this issue...

1. Open up the command prompt and go into the folder that holds those files that look like gibberish.
2. Make sure to do a dir inside the folder to ensure you are only seeing the securerom files and are in the right location.
3. Do a del *.* and answer Yes to the prompt to delete them.
4. Close command prompt window and open Windows explorer and then delete the Windows.old folder

1 more replies
Answer Match 101.1%

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did an SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps\Toolbox\StatusClient\StatusCl... Read more

A:I cannot open "my computer" "control panel" "recycle bin", etc...

You may want to reinstall the operating system.

Backupthe files that are importantto you before you reinstall.

The "New" installation will overwrite the current one

If you do not format your hard drive before the reinstall the installation should not harm your files (That's why I suggest backingup your files) and will speed up the installation process.
 

1 more replies
Answer Match 101.1%

Hi:

Looking for insight/advice re: KB3054476.

According to Infoworld, it was "Optional" in May, but I was not offered it then.
This week, it was offered as "Important" and "Recommended" (!), but only for one of my 2 Win7/64 boxes.

I have read the MS KB article, as well as THIS FORUM THREAD, the latter of which includes a report of a BSOD due to this particular update.

However, there isn't much out on the web about it.
And most of the discussion about it is overly technical for me.
And I am confused as to why it was previously offered as "Optional", but now is "Important" or "Recommended".

I don't *think* I "need" it (as I have no webcam on this box). And I don't like to tempt fate by fixing things that are not broken.

So, 3 questions:
Is it safe to install?
Is it really necessary/important?
Or would I be OK to hide it?
Thanks very much in advance!

A:KB3054476 offered as "Important"/"Recommended"/"Optional"

The status of updates changes with circumstances.
If an update isn't relevant, it won't be offered at all.
If however it's relevant but the related software is not apparently in use, it may be 'optional' - and gravitate to 'Recommended' or 'Important' if the related software is in use.
It can also be promoted through the hierarchy by MS depending on feedback through WU and error-trapped feedback.


If you have (and use) a webcam, then it's probably best to install the update.

4 more replies
Answer Match 101.1%

hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane

A:Remaking "My Music", "My Pictures", "My Videos" folders

  
Quote: Originally Posted by Legume


hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane


You have a backup from before the problem started? a win 7 dvd to do a repair install?
ken

4 more replies
Answer Match 101.1%

I tried to associate the file extension .txt to a new editor program
with the well known cmdline programs ASSOC and FTYPE.

No, assigning them through WinExplorer menu does not work.
But this is another problem which should not discussed here.

When I type now one of the following alternative commands at the CommandPrompt then Win7 returns me something like:

assoc .txt=txtfile

"Access denied"
The following error occurs: .txt"

or

ftype txtfile=D:\notepad++\notepad++.exe "%%1"

"Access denied"
The following error occurs: txtfile"

Why?

The command above work fine under WinXP

Peter

A:"access denied" when using "assoc" and "ftype" from cmdline?

Question:

Did you run cmd.exe with administrative previlliges?
Elevated Command Prompt

3 more replies
Answer Match 101.1%

OK.....
As I said I am new.....
Hope this info is the way you need it.
MANY MANY THANKS IN ADVANCE FOR THE TIME & HELP !!!
Check out the following .....HHEELLLPPP


Logfile of HijackThis v1.98.2
Scan saved at 12:38:36 PM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\logonui.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dellnet.com
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Micro... Read more

A:NEW THREAD / "xads", "xlime", "Context3.kanoodle"

hi

how to create a folder ?

right click anywhere in your desktop
click new,a tab opens ,click folder ,name it hjtantivirus .

download again hijackthis and install it in the new created folder .

your hjt is here now
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

it will not work properly if it stays there .

and don t create a new thread ,keep only one thread .this one ,now .

1 more replies
Answer Match 100.8%

First things first, thanks to all who can help.....





I need to programmatically make some adjustments to the Internet Explorer security settings. Most of these settings I have found but there are a few I have not been able to get a clear exact location for in the registry. I will be using a .BAT file to make
the adjustments on 100+ PCs.





Here is what I am looking for.....





Under the "Internet  Properties" found in control panel, under the "Privacy" tab there is an "Advanced" option button. When I click on it I get an "Advance Privacy Settings" options box. On it are several settings.
The first setting, "Override automatic cookie handling" needs to be checked in order to access the other options. I can do that by adjusting the DWord value of "PrivacyAdvanced" under the "Internet Settings" key in the registry,
"HKCU\Software\Microsoft\Windows\CurrentVersion\Internet settings", to be specific.





What I have not been able to find are the registry entries for the "First-party Cookies" "Accept, Block, or Prompt" options, the "Third-party Cookies" "Accept, Block, or Prompt" options, and the "Always allow
session cookies" check box. Please see picture below....















I have seen references to the following settings as being where those options exist, but nothing that explains ... Read more

More replies
Answer Match 100.8%

I can see "roxio" program in the list of "uninstall or change a program". But I dont see it in the list of "All Programs" on start to use it. There is no desktop icon created to activate this program and this icon is not available on quicklaunch either

Now how can I use this roxio program ? where can I find list of all executable programs and how to execute them ? I clicked on the name of this program in "uninstall or change a program" list. I got a message asking to remove this program. So I cancelled it. I right clicked on this proghram to find the path. But nothing came out. I looked in Program Files to find this program, but found nothing there either. I tried to check in the task manager, if any process is running for "roxio" but nothing was there.

How can I use this application now ? If this program is not there in the system then why does it appear in the "uninstall or change a program" list ?

thanks

A:program name "roxio" appearing in the "uninstall or change a program" only

Go to your system manufacturer's web site and download the Roxio software installation package and re-install it. If option for "repair" appears - choose it.

Here is the Roxio site itself --> http://www.roxio.com/

Regards. . .

jcgriff2

.

2 more replies
Answer Match 100.8%

As the title states, I was wondering how I would do that? Because I really want to add a custom ".tga" 'close' button to my windows theme. I am using WindowBlinds:
(link) - Skin the Windows desktop interface with WindowBlinds

WindowBlinds let's me edit and make my own theme by using their own .tga files or you can make/import them yourself to your desire.

This is the Theme I want to extract the files from:
Placebo for Windows 7 by SolMiler on deviantART (Won't work for Windows 8 that's why I am asking here.)

Here's what my buttons look like now:
What I want them to look like: (Angst version of Placebo theme)
Any info would be very appreciated!

A:Extracting ".tga" files from ".mui" or ".msstyles"

You can use Gimp to convert them, I used 2.6.12 Download The Gimp 2.6.12 - FileHippo.com

Open the .png in Gimp.

Click File > Save as
Remove png
Add tga
Save

I exported the button images from Placebo for you they are in the zip folder below.

Jerry

3 more replies
Answer Match 100.8%

"dependency chain" "windows 7" internet "windows explorer"

At the time of this writing, this search in Google will produce one result at best. Am I searching the wrong things? I have tried a couple handfuls of variants, and I am coming up with zilch.

Though I am fairly well versed in Windows 7 from working on other people's machines, I decided to stick with good old XP because of one issue above all else. When I instructed my firewall to block Windows Explorer from accessing the Internet it completely cut me off from the Internet, no ifs, ands or buts. My understanding of why this is happened leads me to believe the dependency chain for Internet access goes through Windows Explorer. I have long had a habit of blocking my File Manager of choice access to the Internet because... well, it's a file manager! Admittedly, my one experience with Windows 7 on my own machine was a retired student version of Server 2008 R2, but as soon as I found out that was the case, I decided not to make the move to Windows 7 and went back to my XP installation. I believe I was using Sunbelt Personal Firewall at the time. I now use PCTools Free Firewall.

Is this still the case with Windows 7? Is there a workaround if it is?

I haven't tried to recreate this on another person's machine.

+KronKyrios

A:"dependency chain" "windows 7" internet "windows explorer"

Hi KronKyrios, welcome to 7F!

I did find some very old information that may shed some light:
http://www.pctools.com/forum/showthread.php?17198-explorer.exe-(W98)&p=58079#post58079

"Launch Browser Windows in a Separate Process" Setting Is Not Available in Internet Explorer 5.01 or Internet Explorer 5.5

You can go into Services and check:
Windows Firewall/Internet Connection Sharing (ICS)
Network Connections
Remote Procedure Call (RPC)
Windows Management Instrumentation

R-click on each one, then Properties, then the Dependencies Tab.
You would have to cross check each one that is listed.

Here is a good list to help you: Black Viper’s Windows 7 Service Pack 1 Service Configurations

6 more replies
Answer Match 100.5%

I would like to have windows explorer open with all drives showing and with c:\Program Files fully expanded (as if the + next to Program Files were clicked) in the left pane.

I am currently using the target, "%SystemRoot%\explorer.exe /n, /e, C:\Program Files\Agent" which expands Program Files only to the extent that Agent is highlighted and expanded. How can I get it to open with all program files visible in the left pane? I must need another switch but don't know what it is or where to put it in the sequence.
 

A:Open windows explorer with "Program Files" fully expanded?

Try /ROOT or /SELECT

Syntax:

Option Function
---------------------------------------------------------------------- /n Opens a new single-pane window for the default
selection. This is usually the root of the drive that Windows is installed on. If the window is already open, a duplicate opens.

/e Opens Windows Explorer in its default view.

/root,<object> Opens a window view of the specified object.

/select,<object> Opens a window view with the specified folder, file,
or program selected.

Examples
-----------------------------------------------------------------------
Example 1: Explorer /select,C:\TestDir\TestProg.exe
Opens a window view with TestProg selected.

Example 2: Explorer /e,/root,C:\TestDir\TestProg.exe
Opens Explorer with drive C expanded and TestProg selected.

Example 3: Explorer /root,\\TestSvr\TestShare
Opens a window view of the specified share.

Example 4: Explorer /root,\\TestSvr\TestShare,select,TestProg.exe
Opens a window view of the specified share with TestProg selected.
 

3 more replies
Answer Match 100.5%

Thanks to other helpful threads on these forums, I have worked through some maintenance that seems to have resolved the constant BSODs I was having, in large part via sfc /scannow.

I believe I only have one issue remaining as far as sfc is concerned:

Code:
Cannot verify component files for Microsoft-Windows-RPC-HTTP.Resources, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral, manifest is damaged (TRUE)
If I understand what I've read in other posts correctly, sfc is telling me that it cannot verify "C:\Windows\winsxs\amd64_microsoft-windows-rpc-http.resources_31bf3856ad364e35_6.1.7601.17514_en-us_b143921936942d2a\rpchttp.dll.mui" because manifest is damaged.

I think this is the manifest: "C:\Windows\winsxs\Manifests\amd64_microsoft-windows-rpc-http.resources_31bf3856ad364e35_6.1.7601.17514_en-us_b143921936942d2a.manifest" and the file is zero length, so it makes sense that sfc cannot use it to verify the file.

In the interest of completeness, there really is a corresponding system file installed at "C:\Windows\SysWOW64\en-US\rpchttp.dll.mui".

It doesn't seem like doing a repair install is worth it for this one file - I'm not having BSODs anymore, but it would be nice if sfc could complete a clean run, so I have tried to pursue the approach of finding the origi... Read more

A:sfc: "Cannot verify component files for" ... "manifest is damaged"

Were you able to fix your issue without a repair install?

2 more replies
Answer Match 100.5%

I was browsing the web recently on the general subject of Image File creation and am puzzled by several references to "mounting files"

I'm pretty hazy about this process and would appreciate an explanation without getting too technical if that would be possible .

A:"Mounting" files - Can somebody explain this term to a "non-techie"?

General explanation is here.

In case of ISO (and other image files) mounting would be loading that image file in the emulator of CD/DVD drive, so it can be accessible in My Computer. In My Computer it will look like you have another dvd drive with dvd loaded in it (but that would be just an image file loaded to an emulator).

9 more replies
Answer Match 100.5%

Hello all!

I don't understand what the issue is but I am logged on as administrator on my computer and only a few of my files I can access. the window will pop up stating that i don't have permission to view the file! if I am the adminitrator i should have full access to any file, right? this is extremely annoying!!! is there anyway to completely disable this useless function? I've tried to go in to the properties of each file and reset permissions to my admin name (whereas it does it but beside the icon there is a small red X. I don't understand what this means). I've also tried to change the ownership to "Everyone" and that does not work either.

the wierd thing is that it is only on certain files, like programs, or executables to install programs. Most of these i have moved over from XP using the transfer wizard.

This function has no purpose for me and i would like to completely disable it. I am the only person who uses this computer and it would seem to me that there would be a way to completely disable it or there would be a setting to enable access to any and all files without having to go into each file individually to set ownership and permissions.

Does anyone know of a way to aleviate this issue?

Any help would be greatly appreciated!

thanks!

A:Bypass "Ownership" and "permissions" to files altogether!

http://www.sevenforums.com/tutorials...rmissions.html

Be sure that you have permission. Its a 7 thing.

Unless others come by, this is the way it is done. You can try the hidden administrator or disabling the UAC.

Built-in Administrator Account - Enable or Disable[2]=User Accounts

ForVista and Seven
http://www.vistax64.com/tutorials/48...ntrol-uac.html

5 more replies
Answer Match 100.5%

I recently had my computer crash due to a TROJAN virus and at that time I had Windows XP service pack 3 which my computer man installed for me. After being infected I had to completely reinstall EVERY thing on my computer taking my computer back down to Service Pack 1 the only operating disks I had. Now when I do a Disk Clean Up, it doesn't have the option to "Compress Old Files." Can some one please tell me why this option is not there and how I could go about fixing this. Thank you.
 

A:"COMPRESS OLD FILES" not and option in my "Disk Clean Up"

6 more replies
Answer Match 100.5%

my boss only know how to use google chrome, and he usually save websites in his own document library, and he always use "right click mouse > save as" to open his own document library directory, and sometimes he will save some pdf, but when he tries to open an pdf file through google chrome with right click > save as, he can only see file with html extension. any one can help to add "all files" in the drop-down menu next to "Save as type" in google chrome, so he can see all files types when he right click > save as through the google chrome browser.


Thks in advance

More replies
Answer Match 100.5%

i want to know how to remove hidden files in thew usb drive or pendrive...

coz when i open the usb drive, it is blank(empty without any file) but when i scane it with my antivirus software, my software identify some files(not infected by virus) that are in the pendrive.....

from here i get to know tht there are some hidden files in my pendrive(usbport) but how to deleted it when it doesnt display when i click the drive...

help me,
ana
 

A:remove hidden files in "USB drive"/ "pendrive"

The files may be tagged as hidden or system files. Assuming you are using some version of MS-Windows on your computer, there are options for Windows Explorer to hide or show certain file types. Setting the options to show all files may cause the files on the drive to appear.

I would use caution when attempting to remove files from the drive. There may be a chance the files are needed for proper operation of the drive.
 

3 more replies
Answer Match 100.5%

I just got done using the MS fix it tool to remedy the compress old files hang that occured when you used the disk clean up tool . There were about 20k old files that no matter how many times you ran disk clean up they were never compressed ...as a matter of fact at times I would actually see an "Increase" in files listed in the compress old files line AFTER I did selected "compress old files" clean!!!

So I used the MS fix it tool to solve the problem and ....you guessed it the tool removed the option for "compress old files" ! Now it is no longer there. MS states that they deleted this option to prevent the hang issue. But this is why I want to know whether these old files are actually being compressed when i use the defrag and it says "compacting files" ..

Any help would be greatly appreciated.

A:Is "compacting" files in defrag the same as "compressing old files" in disk clean up?

Hi

The 'compressing files' referred to by a defragmenter is the process of moving the files it has put together to the start of the drive.

When defragmenting files, it moves the pieces of the file to an empty space further into the drive. Once it has done this to all the files, it moves them back to the start of the drive as this is generally the fastest part.

This doesn't compress files like the option in disk clean up.

8 more replies
Answer Match 100.2%

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.... Read more

A:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

3. If neither of those work, its likely that because of the fact that when windows is repairing itself, it is generally putting copies of its system files in the same physical location on your disk. Because your disk is obviously not completely dead, ie....its still loading to the windows 7 startup screen, its just copying files to the bad sectors on your hard drive and gets stuck when loading. This is especially my guess because you said Safe mode is having same problems, even after attempting to repair. In the past, I've tried and salvage a disk by reformatting it and only leaving on partitions which do not contain the bad clusters. This takes some time, and some guess work.....and really this is only a "bandaid" fix because once the disk has bad clusters, its only a matter of time before these things give out. You wouldn't want to trust your important data on it anyways....

I hope this leads you in ... Read more

1 more replies
Answer Match 100.2%

Need the aforementioned drivers.  I have installed virtually every driver available in the Driver download page inc Control Vault and cannot get the two driver mentioned.

Any help would be appriciated 

A:Need drivers for Dell Latitude E6520 "Broadcom USH" & "Mass Storage Controller" Windows 7 64 Bit

Check under Security for the Broadcom Unified Security Hub (USH - probably a print/biometric reader) for the device that best matches your hardware:
www.dell.com/.../latitude-e6520
The other "mass storage controller" ... go to Device Manager, right-click the device in question, Properties, Details tab, change dropdown to Hardware Ids and give me the the VEN and DEV ID's (do the same for the above USH device if the driver linked does not work).  

13 more replies
Answer Match 100.2%

Hello,

I recently repaired my windows XP after it keeps to ask me to activate and register online. I try to do so but it seems to be not working. Therefore I repaired it(not format) again with a new XP CD and product key. So far, I didn't find any warning to ask me to activate... but i'm afraid it will happen someday. Moreover, I try to search for 'Windows Activation' in Program Files, Accessories, and System Tools and nothing in there. So how do I activate my windows XP?

A:Unable to see a "Windows Activation" in program files.

Choose to Validate Windows, if it comes back Validated, then you have a Activated, legal copy of XP

2 more replies
Answer Match 99.9%

I'm looking for a program capable of interpreting one key and changing it to another, like a middle man. So, in a simple example, output the letter "b" when I push "a". Or in a more complex example, convert things like movements of a joystick into movements of a mouse, or triggers on the joystick which seem to be registered by games as things like "Logitech Joystick button #1", into keystrokes like "w". Hopefully that's understandable?

Thanks for any suggestions,
Tom

A:Program to "interpret" key strokes, and "convert" them to another?

There is something extremely advanced that can accomplish all you need and more:

AutoHotkey

It has all the necessary documentation to get you started as well. I use it for a lot of old games.

P.S. That sounded like something off a Sci-Fi film.

6 more replies
Answer Match 99.9%

If the default program for an extension is wrong, I find it most natural to change it using the 'Choose Program' option on the 'Open With' menu from the context menu for the file. However, that stopped working correctly a few weeks ago. It is supposed to bring up a dialogue that allows one to choose another program and, optionally, to make that be the new default for the file type. However, what is happening now is that it goes ahead and invokes an irrelevant program (the Emacs text editor) which cannot handle the file. I never see the 'Choose Program' dialogue.

(E.g., I am trying to open a video file with a different player, and, when I click 'Choose Program', it immediately hands the file to Emacs, rather than giving me the chance to say I want to use VLC. (Fortunately, Emacs realizes that the file is too big for anything it can normally do and awaits verification before actually trying.))

I know I can still modify the association using Folder Options; but I would rather get 'Choose Program' working again if anyone can show me how.

Running Windows XP Home SP3 on a dual-core AMD Athlon computer with AMD 960G for graphics. (I think the TSG SysInfo would be overkill for this issue; but I will provide it in a reply if someone thinks it could help.)
 

More replies
Answer Match 99.9%

I usually use it by pinning my frequently use folder,

so when I right click, the list of "pinned program (folder)" will be listed out, easy for me to access them in a click.

and one day, all the pinned programs gone.

so I attempted to "repin" all vanish folders, but even if I click to pin them, they just wont show up in the "pinned program" list.

the worst part, I right clicked, the only option is UNPIN THIS PROGRAM FROM TASK BAR where that program was not pinned in the first place (didnt show up in pinned list) , how come only this option pop out?

please help , thanks.

A:the task bar "folder" pinned "program"

Can you pin anything to the start/taskbar?

2 more replies
Answer Match 99.9%

When trying to update with Windows update, i get a spontaneous reboot or a bluescreen-crash.
The filename "lzx32.sys" is mentioned.

The updates i'm trying to install are the following (roughly translated from norwegian):
"Update for Windows Media Format 11 SDK for Windows XP (KB939399)"
"Windows Tool for removal of dangerous software - march 2007 (KB890830)"
Other than that, i believe i have all other windows-updates.

I do however recall there beeing a third update on the list when i started the installation for the first time.
After the third or forth spontanous restart/bluscreen, when i figured something was wrong, it has disappeared from the list.
I do not know if it actually got installed or not.

I've been following the 5-steps-before-posting as good as possible.
From my normal startup programs msn-messenger and daemon-tools were shutted down before the dss-scan.
Here are the three logs (panda-activescan, dss-main and dss-extra attached):
PS: note that the "extra.txt" is from the first scan, which was done abit earlier than my last scan where the pasted "main.txt" is from.
This is because i was unable to get a fresh "extra.txt" from the last scan (no minimized window at all).
OK, here we go now:

Incident Status Location ... Read more

A:Windows Update - spontaneous reboots/bluescreens "lzx32.sys" - "Exploit/ByteVerify"

BUMP

In addition I've done some work myself (Rustbfix.exe, SpywareGuard, SuperAntiSpyware Free Edition, AVG Anti-Spyware), and it seems to be cleaner than it was (i.e. Windows Update works).

It would be nice anyways to get the facts straight, so here's a fresh log from Deckards System Scanner:

Deckard's System Scanner v20070318.32
Run by Claw_ on 2007-03-22 at 14:16:44
Computer is in Normal Mode.
--------------------------------------------------------------------------------



-- HijackThis (run as Claw_.exe) -----------------------------------------------

Logfile of HijackThis v1.99.1
Scan saved at 14:17:16, on 22.03.2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16414)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Programfiler\Fellesfiler\Symantec Shared\ccProxy.exe
C:\Programfiler\Fellesfiler\Symantec Shared\ccSetMgr.exe
C:\Programfiler\Norton Internet Security\ISSVC.exe
C:\Programfiler\Fellesfiler\Symantec Shared\SNDSrvc.exe
C:\Programfiler\Fellesfiler\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Programfiler\Fellesfiler\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Programfiler\Fellesfiler\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Programfiler\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Programfiler\Grisoft\AVG Anti-S... Read more

5 more replies
Answer Match 99.9%

I have been plagued for years by this bug (see attached Mad_Explorer_col.JPG screen dump), and this morning after visiting Tech Support Guy > Windows XP then searching for "Windows Explorer", on page 2 in "Solved: Explorer tree display curiosity, AKA Odd Windows Explorer Bug", page 2, I found the cause and solution brought by Mosaic1 Wed 07 Mar 2007 05:48 GMT:
Do you have the desktop toolbar on the taskbar?​and mrwes Tue 07 Aug 2007 18:34 GMT:
You can get around this by making the toolbar point to the Desktop but using c:\Documents and Settings > (Profile name) > Desktop. You don't see the My Computer and IE icons in the list, but everything else shows up...​Thanks a lot to Mosaic1 and mrwes!

Versailles, Sat 13 Feb 2010 10:34:25 +0100
 

More replies
Answer Match 99.9%

Hi all

Ill cut to the chase.

What I am asking is someway of turning the Entire Windows Desktop/Screen "Black and White" not simply High Contrast.

I am one of those unfortunate ones, like many, that suffer from quite severe migraines from time to time. Couple this with frequent headaches, sometimes daily. This obviously isnt helped by the fact that my hobby and career are both in IT. I have tried every possible solution to alleviate the headaches. Lay off certain foods, make sure to have a balanced diet. Turn off any strong lighting around my computer screen, remove any strong colours from the desktop etc......

Windows XP / Vista have tried to address this issue with the accessibility wizard, where you can select the High Contrast Options to take any strong colours off the screen. Unfortunately this still doesnt get rid of everything.

When you make any major changes or "logoff" in XP/Vista, the screen fades to "black and white" for a short period. If you know what I am on about, thats the effect I am after.

More than likely a black and white layer is laid over the desktop to create this effect, unfortunately you would not be able to access anything underneath.

I need a fully functional XP machine in complete black and white.

On old CRT monitors you were able to remove the colour, making the screen B&W, but with alot of LCD screens this function is not available.

If anyone has any ideas, you would be helping so many people.

Any assist... Read more

A:Turning the Windows Desktop completely "Black and White" not just "High Contrast"

9 more replies
Answer Match 99.9%

Hi TechGuy,

I'm having some recent problems on my laptop. When I log-in and start using it, the performance starts slowing down. When I look at the Task Manager, I notice that the task called Explorer.exe takes up a lot of my CPU. In a couple of minutes, I also start getting Internet Explorer windows to pop-up on my screen (I normally use Firefox) with advertisements suggesting that my computer is infected and some software downloads that could help. I recently installed McAfee Total Works, or whatever they call their 10-in-1 software which is supposed to do it all. I ran several scans, and on some of them, if did find and disable the Generic.dx trojan. Even though it claims it is doing something, I don't notice any changes - Explorer.exe continues to bog me down, and the IE windows keep popping up to the point that I cannot use my computer effectively anymore.

IBM T-40 laptop (about three and a half years old)
Microsoft XP-Professional

Any pointers would be truly appreciated!!

Thanks,
Sandjosh
 

A:Solved: "Explorer.exe" process keeps running, IE Windows intermittently open, "Generic.dx"

16 more replies
Answer Match 99.3%

I just installed a new 60gb hard drive as a back up to put my movie files on,it installed fine and it works fine but i get "windows milenium emergancy boot" when i boot the system up .I don"t know if this error is serious but I do know that the system seems less stable in this boot mode..can someone please help? thanx
 

A:after installing new "hard drive" it starts with "windows emergency boot"

closing duplicate, view this thread
http://forums.techguy.org/t76279/s5b1a29d68c715c9a36d25291025adddb.html
 

1 more replies
Answer Match 99.3%

ie9 new browser opens "blank" windows 7. Changing it to "home" doesn't last if you shut down. Next session, it still opens "blank"

A:ie9 new browser opens "blank" windows 7. Changing it to "home" doesn't

Welcome to Seven Forums bobbot11. Help us understand. When you 1st open IE, it opens to a blank page instead of your home page? Or is opening new tabs that open a blank tab? Or is opening a new window that opens a blank window?

If IE is opening to a blank page instead of a home page you have set, try re-registering IE.

Download the IE Restorator, and choose Re-register 32 bit IE in (whichever version your OS is) W7

SF IE Restorator - Troubleshooting General Issues with IE

See if that helps. A Guy

1 more replies
Answer Match 99.3%

After a catastrophic computer failure, I managed to recover almost everything. However upon booting up I got the message "BOOTMGR is missing". I used the original Windows installation disk to do Startup Repair, which recovered BOOTMGR. However now every time I boot up I get a message from Windows Boot Manager asking me to choose between "Windows 7...(recovered)" and "Microsoft WIndows Recovery Console". How can I get the computer to boot straight into Windows 7?

More replies
Answer Match 99.3%

This is a resurection of an old unresolved Vista Post, and it also happens in Windows 7.
====================================
Original subject - Start Menu - program search issue
I use Windows Mail for my daily email tasks, and would like to be able to
open the program by using the vista search bar built into the start menu. The
problem is, when i search for "mai" it brings up Windows Mail, and I can hit
enter and load the program. However, when I search for "mail", it returns:
"No items match your search." I have it set to index both the start menu and
my programs directory, and have even tried to rebuild the index.

It seems kind of strange that Vista would recognize that when I type "mai" I
want my mail programs, but when I actually type "mail", it gets confused...
and this in turn has -me- confused.
====================================
and
====================================
Oh thank goodness, I've finally found someone else with the same problem.
The word I have issues with is "photo" ("phot" works great, but no results
for "photo"). Not a show-stopper, but WHY!?
====================================

I've noticed the same thing with Windows Desktop Search in Windows 7. After some experimenting I think I have the reason why, but not a fix.

It seems to em that mail and photo are probably used as "kind =" prefixes in Windows search, and even if you enter photo with out ... Read more

More replies
Answer Match 99.3%

Hello all,
I'm suffering froma troubling problem with a Windows 7 system.
This system has a boot HDD (C and data storage RAID5 array (D. The system locked up hard requiring a power down to get Windows operational gain.

The sytem is fine now, except the ~3 TB RAID5 array is not seen by W7. The W7 disk managment snap-in reports that the 2793.97 GB "drive" exists, but the status is "Unknown" and "not initialized". Needless to say, the drve was online and contained LOTS of data before the crash. Due to it's size, the drive was GPT.

I ran a synchronize on the RAID 5 array and that finished w/o error, so I assume the actuall array is fine.

Any recommendations for what utllity/diagnostic/etc. to try next?

Further info: The RAID 5 is a creation of the AMD SB750 "southbridge", which uses tech licensed by Promise Technology.
 

More replies
Answer Match 99.3%

So I have this weird thing happening in my relatively fresh install of Windows 10.
Whenever I search for "Check for Updates" or "Windows Update settings" on the search box of the start menu, I get the results that I want but if I press enter or try to click on those results nothing happens.. As far as I know I can click all others search results but those, and maybe others related to windows update.

I can still get updates by going to Settings>Update & Security though.

In my other computers this works fine, and as far as I can tell all the updates are done.
From what I've searched around other people seemed to have a similar issue where they couldn't acess the settings at all which isn't my case. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results.

A:Can't click on "Check for Updates" "Windows Update settings" on Start

Spanker,
.............. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results. .....................

Please clarify what did you mean by "no results".

When sfc /scannow is completed, it will give you one of the following 3 reports....................(paraphrasing)

1. No integrity violation.
2. Found corrupted files and repair is successful.
3. Found corrupted files but unable to repair some of them.

Which one of the above is applicable to you ?

3 more replies