Tech Problem Aggregator

Feedback mechanism to MS on RTM release?

Q: Feedback mechanism to MS on RTM release?

is there?
I'd like to give a little feedback.

A: Feedback mechanism to MS on RTM release?

No, since RTM is the final version.

1 more replies
Answer Match 48.72%

Recently, using FF 2.0.0.16 on my Vista Ultimate 32 bit computer, I notices popup ads from c5.zedo.com, when I visited a web page. The pop ups appeared if I left OR right clicked on a text area. The mouse pointer remained a pointer; had not changed to hand with extended index finger.

I verified that FF's popup blocker is / was on. I removed all exceptions & restarted the PC. Same problem. I viewed the page source, searched for zedo and found it related to java script.

I turned off Java, rebooted & the problem went away.

This did NOT occur using IE 7.

I stopped the popups by using the modified hosts file from mvps.org. Because the .bat procedure used by the mvps author to replace the hosts file failed in the past, I copied the contents of the modified hosts from mvps.org & pasted the contents into my hosts file, rebooted & success occurred. I had re-enabled java in FF.

I hope this information is useful to anyone else who encounters the phenomenon.

RF123
 

A:New [ to me ] Pop up mechanism with FF

rainforest123 said:


I verified that FF's popup blocker is / was on. I removed all exceptions & restarted the PC. Same problem. I viewed the page source, searched for zedo and found it related to java script.

I turned off Java, rebooted & the problem went away.Click to expand...

Firefox's popup blocker does not block all popups, although it does its best. The best way to block ads and the rest of the popups would be to use the Firefox AdBlock Plus extension.

Also, Java is not the same thing as Javascript. They are completely different, and I'm assuming you disabled JavaScript, not Java. However, you don't want to completely disable JavaScript because almost every modern website uses it in some way or another. AdBlock Plus should block the ads, but you can also use NoScript to block all JavaScript on a per-site basis.
 

2 more replies
Answer Match 47.88%

These release notes address critical late-breaking issues and information about this beta release of the Windows? 7 operating system. For less serious issues, refer to Things to Know About This Beta Release of Windows 7 (Download details: Release Documents for this Beta Release of Windows 7). Unless otherwise specified, these notes apply to all editions of Windows 7 that support the features mentioned in each note.
Accessibility

Microsoft? Narrator does not read information from the command line properly. This issue may also affect non-Microsoft screen reader applications.

To correct this, always run the command prompt with administrator privileges.

Apple iTunes

This issue only applies to 64-bit editions of Windows 7.

If you attempt to download and install Apple iTunes, the 32-bit version will be installed instead of the 64-bit version. This will prevent syncing with iPhone.

To avoid this, install the 64-bit version from the following location: iTunes 8.0.2 for Windows Vista 64-bit.

Backup
When you attempt to restore files backed up from a Windows 7 computer to a Windows Vista? computer using the Restore wizard on the Windows Vista computer, the restoration fails.

To work around this, in the location where the backup file is stored, locate the Mediaid.bin file, which is in inside a directory that has the same name as the computer. Move the Mediaid.bin file up one level, so that it is at the same level as the directory with the same name as the comp... Read more

A:Release Notes: Important Issues in This Beta Release of Windows 7

Thanks DA,

Excelent post

Everyone should read this info so have made thread sticky

9 more replies
Answer Match 47.88%

GFI Software is happy to announce the general availability of Service Release 2 for VIPRE 2012. This Service Release is a free update, applicable to all users of VIPRE Antivirus 2012 and VIPRE Internet Security 2012.

We have improved the performance of VIPRE and resolved several customer-reported issues in this release. Service Release 2 contains a number of improvements to the firewall and web filter drivers, the VIPRE service, and threat engine. Because it is a service release, no new features were introduced.

Highlights of this release:

Fixed issues where the firewall or web filter drivers would hang
Fixed instances where browsing the internet, or using uTorrent, with web filtering turned on would cause a system hang
Resolve issues with Active Protection
Resolve an issue where incompatibilities with other drivers would result in Windows shutting down with STOP error
Fixed a service crash during product registration on certain machines
Now correctly reports incompatible programs on computers running 64-bit versions of Windows


How to Get Service Release 2:

VIPRE 2012 will automatically check for the update and prompt you to install. GFI Software is making available Service Release 2 to all users of VIPRE 2012 on a ?metered? basis. This means some customers will receive the update sooner than others. If you?d like to manually update immediately, you can find instructions here:

http://kb.gfi.com/articles/SkyNet... Read more

A:VIPRE Antivirus 2012 - Services Release 2 - Release Announcement

I am interested to see this:
Resolve issues with Active Protection
Fixed instances where browsing the internet, or using uTorrent, with web filtering turned on would cause a system hang
 

8 more replies
Answer Match 47.88%

I am in need of a program to be able to look up MP3s on an online database and return the ORIGINAL YEAR the song was released as well as the ORIGINAL ALBUM. I don't want Greatest Hits or Compilations. So say for instance, I have an MP3 titled "Def Leppard - Photograph". I don't want the program to return the greatest hits albums that this song was on and the year those greatest hits albums were released, I only want to see "1983" and "Pyromania".

Does anyone have any idea where I can find something like this?
 

A:Taggin MP3s with Original Release Year and Release Album

Déjà Vu all over again.

http://forums.techguy.org/all-other-software/871899-music-tagging-software.html
 

3 more replies
Answer Match 47.46%

My Windows Mail program suddenly stopped sending and receiving messages. The following error message popped up: "Account: 'Windows Mail', Server: 'pop3, Server Response: ERR An authentication mechanism MUST be entered,' Port: 110, Secure (SSL): No, Server Error: 0x800ccc90, Error Number: 0x800ccc18"

I have tried to trouble shoot settings. Everything appears to be correct per my internet provider. My operating system is Vista; I have been using Windows Mail for several years with no problem. Nothing has changed with my computer re: recent updates or new programs.

What is an "authentication mechanism" and how do I set/respond to the error issue? Any available help would be greatly appreciated! (FYI I'm not a computer techie-type so simple-minded (referring to me of course!!!) direction would be especially appreciated! Thank you!!!

A:Authentication Mechanism MUST be Entered

The problem could be with your mail provider. Wait until tomorrow, if it still does not work properly report back and we will go from there.

3 more replies
Answer Match 47.46%

pci bus mechanism #2

won't boot to floppy

freezes at that message
 

A:freezes =pci bus mechanism #2 error

7 more replies
Answer Match 47.46%

I have a HP Deskjet 3745 I've had for a year and it keeps getting locked up on the left side and says mechanism error cradle can't move. I can print a test page but when it gets to the bottom of the page thats when it gets locked up. I try to align it but Its printing sideways like the cradle is out of alignment but its screwed in tight plus the lines are overlapping each other like theres a problem with the ink. The ink has 75% left. I sold it and took it over there one day after work so it sat in my car so I think maybe the heat inside the car may have did something. The lady I sold it to just moved and I think they may have dropped it cause theres a black scuff mark on the corner but she said she didn't. I had to give her money back so now I'm left with a broken printer.
 

More replies
Answer Match 47.46%

My mouse's right click is not functioning properly. When I press down the right mouse button, nothing happens, but when I release the button it seems to perform right mouse down and right mouse up at the same time. I figured this out through Browser Mouse Event Test Page. I have tried switching to a different mouse, but it still has the same issue. Everything else about my mouse seems to be fine(left click, movement, ect.). This makes me unable to hold down the right mouse button, which is required in most games.
Thanks

More replies
Answer Match 47.46%

Hello Members, just a quick question please
Will i be able to upgrade from Windows 8 Release Preview, to the Windows 8 final release, and when i mean the term upgrade, i'm talking any programs,files and settings i may have installed while using the Win 8 'Release Preview'.

I have searched this forum, aswell as other forums, i've also look at the Microsoft Windows 8 Release Preview 'frequently asked questions', but can't find clarity to this specific answer, does anyone know the answer please?

I havn't installed Win8 RP to my computer (Dell Inspiron 2320) a yet, so this issues what's holding me back.

Also what runs better, a Windows 7 to Windows 8 upgrade install (same drive partition)?, or, a dual boot with Windows 7 on it's original partition and Windows 8 on it own partition but still on the same hard drive, the reason i asked is that i gather in creating a new partition for Windows 8, the Windows 7 partition need to be compacted down, is there a performance impact to either OS?

Any info, or opinions would be great.

regards
Livio

A:Will i be able to upgrade Windows 8 Release Prev to the final release

Welcome to the EightForums! liviococcia

Once the finished retail product is available when launched you would need to perform a clean install as with any previous version of Windows. The backup tools however may allow you to preserve and restore user files and settings without too much problem.

The final details in the "pudding" so to speak will be known once the RTM(Release To Manufacturers) is seen. Clean installs are always the preferred option over upgrading over a previous version which can often carry some problems along with the upgrade.

With the Windows Easy Transfer option with 7 once all programs were back on a clean install the restoration of the backup made with that option was found to restore the files and settings with 7. I expect the same should be seen with 8 as well.

1 more replies
Answer Match 47.04%

Hi Team,
May I know how does windows time works?
During system boot up, after BIOS transfers the ownership to windows, does windows get the time value from CMOS RTC?
After that, how does windows time tick-tock? using PCH's HPET(High Precision Event Timer) or CPU's TSC(Time Stamp Counter)?
Does any interrupt or events will cause windows time pause? such as SMI?
Any documents from windows to explain this mechanism.
If I have to debug an issue relative with windows time, any way to monitor this time during system boot up?
it is a data structure or run time register reading or something else?
Thanks,
-Tarzan

More replies
Answer Match 47.04%
Answer Match 47.04%

Hello,    Does anybody know what is the part number/s for the latching mechanism, whole mechanism/slider etc., that holds the lid/screen closed?    I found some other posts where they were talking about the lid/screen hooks. I'm talking about the mechanism that the hooks get retained in.   I've started to put together a T420s that someone else took it apart and when I finished I realized that I was missing the latching mechanism and I've looked online and I couldn't find anything, not even the proper name/definition for that part/s.  Thank you,Emil

More replies
Answer Match 47.04%

Good morning.
 
I'm a third year university student and for one of my assignments, I am to write a research report based on the question 'Are Passwords an Effective Security Mechanism'. I have focused the research on biometric and traditional (alphanumeric combination) passwords. Also, I am required to obtain some primary research which can be argued against my secondary research to form some sort of conclusion, and to do this, I have decided that a questionnaire is the perfect solution.
 
I would appreciate it if some of you would take the opportunity to complete my questionnaire as you will be helping me out a lot. It will take no more than 2 minutes to complete. Also, I would be interested in hearing your thoughts and opinions on biometric and traditional passwords, regarding their security.
 
The survey can be found here - https://www.surveymonkey.co.uk/r/VMS7XPD
 
I apologise if this is in the wrong section or breaks a rule. I have checked the rules out and I believe it doesn't break the advertising rule, but it might to you guys.
 
Thanks in advance.

A:Are Passwords an Effective Security Mechanism

The user is the first and last line of defense. Strong passwords can be effective security measure. Unfortunately, it has been proven time and again that the user is a more substantial factor (weakest link) in security than the architecture of the operating system or installed protection software. Security is all about layers, and not depending on any one technology or approach to detect or save you from the latest threats. The most important layer in that security defense? You! Most threats succeed because they take advantage of human weaknesses (laziness, apathy, ignorance, etc.), and less because of their sophistication.Krebs on SecurityThese were the worst passwords of 2015, and they're only getting worseThis List Of 2014s Worst Passwords, Including 123456, Is EmbarrassingIts 2014 And Our Passwords Arent Getting BetterThe 25 Worst Passwords of 2013

3 more replies
Answer Match 47.04%

hey,
i just bought a new computer, and assembled it.
everything works great, except that whenever i unplug the computer and then plug it back, i cant turn it back on again for a while.
No lights, no response, like its not in the socket at all. only after a few minutes of being unplugged it lets me turn it on again.
It was very anooying when i assembled the system, and had to wait for a while between adding stuff.
It really pissed me off when i had a power failure in my house for a second, and couldn't use my computer for about 20 minutes later.
Is this a safety thing from enermax? if it is, is there a way i can get around it? or atleast minimize the wait time?
my system, if u think that it might be somthing else:
Processor: Intel core 2 duo E6400
Motherboard: Asus P5B
Mem: DDR2 512Mb 533MHz CL2 Kingston
Graphics: Sapphire Radeon X1950PRO 256MB PCIe
PSU: Enermax Noisetaker 420W

thanx ahead for any help.
 

A:Enermax annoying safety mechanism?

I've got the 475W Noisetaker and a 480W Noisetaker II, never had this problem with either of them. I did static discharge on the case of the comp that had the Noisetaker in it once and it wouldn't power on for a few minutes, but I've never had a problem like you are discribing.

I may be off on those wattages, I can't be arsed to check for sure right now. But I'm not off by more than 15, and its not even relavent to your case.
 

1 more replies
Answer Match 47.04%

Recently, the eject button on my dvd drive stopped working. I took off the faceplate and noticed the pin that would push the eject button on the drive was bent, and pushing the button on the drive still caused the drive to eject. So I'm pretty sure it's a problem with the faceplate only.

Does anyone know where I could find a new one? I have a HP dv6000 series (dv6568se)

Thanks!
 

A:Broken eject mechanism on laptop

Though I didn't do research on the particular model, I would assume you would have to send it in to HP for it to be replaced.
 

2 more replies
Answer Match 47.04%

Hi Gang,

When I try to search my computer, any part of my computer, the search module seems to stall. That is, it doesn't appear to be doing anything for anywhere between 10-30 seconds. After this time the meter starts working and the word "searching" comes up on the search box.

There seems to be a long delay between the time I give the order to search, and the time the search command is actually executed.

What can I do to eliminate this delay?

I have WinXP Pro SP2
 

More replies
Answer Match 46.62%

Hello there I have a HP Envy TouchSmart 15 Notebook and everything is okay with it but I was told it has a safety mechanism in the laptop where if I move it to much or tilt it the wrong way it will freeze up and be roughly 1 fps for a good 2-5 minutes I really hate it when I'm trying the walk movies in bed and I move a bit and it activates it does anyone know how to disable this feature?

More replies
Answer Match 46.62%

yearly renewal coming up.. I KEEP thinking of items read and thought I willgive latest for instance.. I know I WILL PUT ON THAT LITTLE PROG SHOWING WHEN WINDOWS IS FULLY AVILABLE.. [oops sorry arthritic fingers and bi focal] NOW where is it I wonder.. I WOULD PAY EXTRA TO HAVE SUCH An index FACILITY AS I DO VALUE THE WRITEN oops word especially for instructions. thanks

A:Search mechanism for 2016 printed PCA MAGS

I'm sure that makes some kind of sense to you, but I'm struggling to understand what it is you want to know.

1 more replies
Answer Match 46.62%

Is there any built in mechanism in Windows 7 during the fresh installation that all files are copied successfully from DVD to hard drive? or as long as Windows 7 completes the installation no matter how fast/slow it takes, one can assumed that all files are copied successfully?

Mine took about 25 mins, but during the installation lots of long pauses while reading/copying files from my 4X DVR+RW to hard drive as if Windows couldn't find files or constantly waiting from the rewritable 4X DVR+RW), but it eventually competed the installation in 25 mins none the less without giving out any error messages.

Thanks.

A:Built in mechanism to check files during installation?

you might try
cmd sfc /scannow it checks for any corrupt system files.

2 more replies
Answer Match 46.2%

New Pre-Release Build: 21.0.0.100 is Now Available!
You can see more information here!

Final version is expected on 14th of September!
 

A:New pre-release build is available and information about release date

Is Norton End-Point for the Home User? And does it offer better protection?
Also, how is the Ram Usage? Just wondering?
 

5 more replies
Answer Match 46.2%

I am looking for a Windows 7 script (perhaps in vbs) or another mechanism that will copy the target of a shortcut to a new folder.
 
If the shortcut points to a single file, copy the file to the new folder
If the shortcut points to a folder, copy that folder to the new folder
 
Thank you.

More replies
Answer Match 41.58%

My email client, desktop program PostBox (for Win) has been slowed since I installed BD TS2016 (I'm quite sure this is the reason as it was very fast before, and slowed immediately after...)

I also run WebRoot AV (which does not scan email as per their documentation) and HitmanAlertPro (which could also be affecting my email client, but I uninstalled it to test this somewhat small chance given its just an anti-exploit, and it doesn't seem to have affected it, the client is still slow).

1. I would LIKE BD to scan my email as of course having AV w/o scanning email could in many ways be pointless given email can be a deadly vector for heavy malware.

2. But I don't want my client to be slow. It's not horrible, and I suppose I could tolerate it (basically deleting messages, loading new messages, and the program responsiveness overall, is a bit sluggish compared with its normal instantaneous response)

3. Is there a way to configure email scanning differently? Or should the program NOT be slowing my client noticeably in general, and is this behavior indicative of something being wrong?

I'm sure BD users will be able to comment on whether it slows their email or not given they use a desktop client like Outlook, Postbox, Thunderbird, etc.

Thanks!
 

A:BitDefender Email Scanning Mechanism? Performance Issues w/ email Client

In the past I used BD TS exclusively with OutLook as my e-mail client and had no such issues, have you tried, or open to try switching clients to see if it's something about Postbox that BD TS disagrees with ?
do let us know what you discover either way.
Thanks for sharing
PeAcE
 

1 more replies
Answer Match 40.32%

Greetings,

I currently have Windows 8 Release Preview, it is my main OS. I have many programs,files,settings,etc.

My question is when the final version of Windows 8 comes out will I be able to upgrade to that version from my current version (Windows 8 Release Preview). What I mean by upgrade is not doing a clean install and having everything put into the windows.old folder.

Thank You.

A:Windows 8 Release Preview -> Windows 8 Final Release.

some minor hints that it won't work, nothing concrete though sorry.

4 more replies
Answer Match 36.12%

On screen when I touch my sound control or wireless touch buttons.

I have a Hp dv7 laptop running windows 7 64-bit.

A:No feedback

Hi there, if it happened recently, then simply do a system restore.

2 more replies
Answer Match 36.12%

I can't sign in to feedback hub.What might be wrong or is it a bug? 950 insider fast ring 14951 build.

More replies
Answer Match 36.12%

Hi I just got through reading this article and I would like some feed back on it ... should the fix be downloaded and installed or do we in USA have nothing to worry about ...

Thanks in advance ...

Warning on stealthy Windows virus
Once installed the virus, dubbed Mebroot by Symantec, usually downloads other malicious programs, such as keyloggers, to do the work of stealing confidential information.
 

A:Feedback Please?

10 more replies
Answer Match 36.12%

I don't know if this was discussed somewhere already but I noticed that there is no longer a option to give feedback on every single window you open.
btw: I just installed W7 an hour ago.

A:Feedback

Click on the download link in my sig to put a shortcut on your desktop for send feedback.

1 more replies
Answer Match 36.12%

First of all Hello this is my first official post and yes my user name is Graphix "how its not taken yet is beyond me lol " well I'm starting to do animations in 3ds max for a fps im trying to concept and I wanted to know what you guys think about these two rigs "whats the diffrence and wich one is better for me thank you please help and I need a great Graphics Card if anyone knows of a 300 dollar good one .

First is this one from Walmart :

Code:
http://www.walmart.com/ip/HP-BV542AA-ABA/15701581
Second is from Fry's :

Code:
http://www.frys.com/product/6388441?site=sa:PC%20Computer%20Pod:Pod1

 

A:Please need feedback

please help
 

2 more replies
Answer Match 36.12%

Hidy ho all,

I'm trying to figure out what to do with my tax return monies. And I'm leaning more towards building a new gaming PC then anything else.

So, I put together a parts list and could use some feedback on it. There are reasons for everything on this list, mostly budgetary, some preferential.

Anywho, if you have the time, could you take a look and tell me what you think?
 

More replies
Answer Match 36.12%

Intel Pentium 4 / 2.6CGHz 512k socket 478 Hyper Threading Technology 800 MHz FSB - RETAIL
Specifications:
CPU: 2.6GHz
Type: Pentium 4 Northwood
Cache: 512K
BUS: 800 Mhz
Socket: 478
Retail box (with Heatsink and Fan)
$220
ABIT IS7-E ,Intel 865PE chipset Springdale for Socket 478 P4 ATX motherboard RETAIL
Specifications:
Supported CPU:Intel® Pentium® 4 Socket 478 processors Hyper-Threading Ready
Chipset:865PE / ICH5
FSB:800/533MHz
RAM:4x DDR Single/Dual Channel DDR 400 up to 4GB
IDE:2 x Ultra DMA 33/66/100 Up to 4 Devices
Slots:1x AGP PRO, 5x PCI Slots
Ports:2xPS2, 1xLPT,1xCOM,1xLAN, 4xUSB and Audio Ports
Onboard Audio: 6-Channel AC 97 CODEC on board
Onboard LAN: On board 10/100MB LAN
Onboard SATA: 2 channels Serial ATA 150MB/s
$109.00

HD: Western Digital 120GB 8MB SE HDD WD1200JBRTL
$39.99 AR AC OfficeMax This coming Sunday!

Memory: Kingston 512 MB KVR222/512R 333 MHz DDR
I got this free from a friend!

MSI GeForce FX 5600 128MB 8X AGP w/VIVO (Retail) FX5600-VTDR128
$167.00

DVD-ROM Drive
$20.00

Floppy Drive
$7.00

I'm torn between the following cases:

1) AHANIX Platinum XP ATX CASE
2) CHIEFTEC FS710 BLACK ALUMINUM Mod See-Through Case
3) RaidMax 268 SILVER USB Mod W/ 350WATT
4) ANTEC LIFE STYLE SERIES SONATA PIANO BLACK Model# Sonata w/ ANTEC TRUE380 380W Power Supply

This is the first time I'll be building a comp. Does this look like it's going to work?
Do I need anything else? Feedback is appreciated!

Thanks!
&... Read more

A:Feedback for this, Please!

yeah i think it is going to work, i know a little more bout amd cpu's based platforms, there is a point on memory: in case 333 is free it's good, but in the future adding 400 will require throwing 333 away because 333 will cause 400 work like 333

and don't forget cd-rw - for such a pc you need it!
 

1 more replies
Answer Match 36.12%

Ok, I have only had this rig for 12months - had to be completely rebuilt last month due to faulty parts, but I am now in the market for an upgrade - a new rig.

Anyhow, I have learnt heaps about hardwear since getting my first computer and am going to build this one myself after hand picking the parts. So, I'd just like some feedback as I pull it together:

AMD Athlon 64 4000+ 1GHz FSB Socket 939 Processor
ASUS A8V DELUXE ATX AMD Motherboard
CORSAIR XMS 2GB (2 x 1GB) 184-Pin DDR SDRAM Dual Channel
Thermaltake XASER, Armor Series VA8000BWS Black Computer Case With Side Panel Window
Antec TRUEPOWERII TPII-430 430W Power Supply

I already have optical and hard drives to put in it - I will probably buy another 1-2 hdd's anyway.

I did my costings based on USD to AUD = $1200 aprox. I checked some of these parts from Australian places and it would cost around $1500. I think I can handle that - a bit more then I wanted, but I think with these parts, well worth it.

Late,
 

A:New rig - feedback

13 more replies
Answer Match 36.12%

Hi Everyone
We have just released a product called removed link as against forum TOSIt is a note taking & synchronizing tool. By which you can create a note on your PC at home or office and can access the same from anywhere using your online notebox and even your phone using WAP.
I dont really wanna make this post as a spam but what i really want is your help. I would like if you people help us out by giving us feedback.

name removed is completely free tool and we intend to keep it a free service for life.

Regards
Sarfaraz Merchant
 

A:Need feedback

Sory rules say NO you cannot post these sort of adverts here

Category II Offenses
Advertising and Spamming
Spamming/Advertising - You cannot post advertisements of any sort in any forum. This includes products, services, or web sites from which you'd directly or indirectly benefit in any way.
EXCEPTIONS (may be objected to, at the discretion of the moderators)
Unaffiliated Announcements - If you see a great deal somewhere, you're welcome to share it with everyone by posting it in the "General Opinions and Reviews" forum if and only if you are completely unaffiliated with that deal.
Signatures - When posting a useful response, you may include your own web page (or that of your company) in the signature of your message. However, this does not precede other rules. (That is to say that you can't mis-use HTML in your link, provide links to naughty web sites, etc.)
I have removed the link and am closing this thread
 

1 more replies
Answer Match 36.12%

Can I give feedback to Microsoft about Windows 7?
And what kind of information send Windows 7 to Microsoft? Can I see them.

A:Feedback

Hello Darkhorn,

Yes, you sure can send feedback to Microsoft. It will give you a report towards the end to see what is being sent to Microsoft. It is nothing to worry about though.

Hope this helps,
Shawn

3 more replies
Answer Match 36.12%

HI , i am putting together a new pc, and it would great if someone could give me some feedback and advice, here are some parts i want to get:
cpu - intel core i7 3770 8MB cache socket 1155 $328
VGA- ASUS 2GB GTX 660 Ti $330
RAM -Kingston 8GB kit (2X4GB) (1600Mhz) HyperX $ 79
Case - corsair carbide 400r $ 105
mother board - asus 1155 P8-Z77 -V- Pro $220
HDL- Intel 520 SSD cherryville 180GB SATA3 $215 (for OS)
HDl -western digital 1TB sata3 64MB Caviar green WD $69
DVD-PIO pioneer DVD-RW sata x2 $42
POwer supply - coolermaster - M800w modular silent pro $180 or a aerocool strike X 800W 80$149
plus fans - two on the side and two extra on the top (140mm) $50 (case already comes with 2 front and on back.)
i want to install windows 7 home premium 64bit

i am planning to use this pc for high end gaming, 3-d rendering, photoshop, animation,music, etc

so any help would be really great, thank you

A:help need feedback

Where are you getting the 660 Ti price from ? That`s a bit high for it.

1 more replies
Answer Match 36.12%

When I play Battlefield 2 game online, my squad members hear all the gameplay in the background while I am talking through the mic/headset.
They say its annoying but I don't know how to stop it. I don't have any sound on through the speakers.
There is obviously something wrong with the set up.
Can anyone help me out please?
 

More replies
Answer Match 36.12%

Well here's the current situation, a buddy told me to arm him an inexpensive and modest pc, so I choose this components I hope you guys can tell me what to fix. He doesn't want to run the newest games with higher resolution and things like that just some old games like AoM and maybe some ol' fps games like wolfenstein, just to get a picture.

AMD Athlon 64 3000+, 2.0GHz, Cache 512KB L2
Kingston DDR DIMM PC3200 (400Mhz), 512MB
Hard Drive Western Digital of 120GB at 7200RPM
Video card MSI nVidia GeForce FX 5200 with 128MB DDR, AGP 8x TV-out

Mother board would be any nice one that support everything, dvd burner, floppy etc etc. Will probably tell him to add more ram whenever possible.

We are really on a budget so please don't suggest expensive stuff, thanks in advance guys.

BTW, not sure if this is the correct forum section, please redirect if needed.
 

A:Need feedback with pc

11 more replies
Answer Match 36.12%

Ok, I have a feedback problem with my mic, while my mic is open anything that comes through my speakers also gets played through my microphone. The speakers are not causing it, as in the speakers are not so loud that they cause feedback. Yet, I'm still having feedback issues. I've done my best to fool around using my knowledge of sound and manipulating different options. Everything I've tryed has failed up to now.

I came here in search of some possible fixes to known feedback problems and work a rounds.

Any information posted will be taken into account and I will use it to try and fix the problem. I'm hoping the knowledgeable people in the world, like this website, have some good advice and suggestions.

My Audio manager is - Realtek HD Audio Manager
If someone could help me find the most up to date driver for Realtek chipsets then I would be much appreciative.

Thanks for your time,

-King
 

A:Can't get rid of feedback on my Mic

You may have the mic boost enabled by mistake. Take a look at the audio settings once again
 

1 more replies
Answer Match 36.12%

I'm sure most of you know that support for the free AVG7 ends in January. Just curious as to any negatives experienced with the new 7.5 version from people that might be using it now.(Moderator edit: moved thread to more appropriate forum. jgweed)

A:Avg 7.5 Feedback

I've updated several systems with it - and know of quite a few folks who've also done it. All without problems.

Make sure to follow the directions and install it as a "Repair" - everything should work fine after that!

9 more replies
Answer Match 36.12%

Computer seems to be running a bit slow

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 5:20:02 PM, on 14/04/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16640)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\ATKKBService.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe
C:\WINDOWS\system32\ctfmon.exe
C:\WINDOWS\system32\wuauclt.exe

R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKCU\Software\Microsoft\Internet Connection Wizard,ShellNext = http://windowsupdate.microsoft.com/
O2 - BHO: Adobe PDF Reader Link Helper - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\Program Files\Adobe\Acrobat 7.0\ActiveX\AcroIEHelper.dll
O4 - HKLM\..\Run: [NvCplDaemon] RUNDLL32.EXE C:\WINDOWS\system32\NvCpl.dll,NvStartup
O4 - HKCU... Read more

A:feedback please

Howdy MADBADGER

Thank you for your patience. I will be helping you deal with the issues raised in your log from this point onwards

Before we start jumping into things, here is a quick basic note which I mention to everyone. The fix which I have provided for you is for this computer only, it should not be used on any other computer. Each fix is tailor made for the specific task in hand. If for some reason you have system restore disabled, then please re-enable it before proceeding, an infected restore is better than none. Please read through the fix first and set enough time aside to complete the task in one session. If there is anything you feel needs clarification then please ask - do not guess! Thanks.

If this is a computer from a work place then please advise your IT department of the concerning issues before commencing past this point.

Please follow these directions in the order they are set out for you.

I do not see any anti virus detection software present on your computer.
Without a resident virus checker you are leaving yourself wide open to infection, this in turn would render the fix useless. Before proceeding further, please download, install and update an anti virus solution. A good free anti virus software to start with is AntiVir? or as an alternative try AVG Free Edition

I do not see any signs of a firewall present in your log
The windows firewall only blocks traffic in one direction and will not prevent nasties on your computer phoning ho... Read more

8 more replies
Answer Match 36.12%

Couldn't believe it when we went online the first time with our brand new laptop (first factory computer for us since the used IBM AT in 1983), got bumped offline and just plain off the computer with an RPC message.

Thanks to TSG forum for getting me past the factory blues. I know where to hang out, now.
 

A:Feedback

Its deffinitly a learning experience..
 

1 more replies
Answer Match 36.12%

Please look at attached reports and help me figure out what is causing my issues.

x64 - Home Premium
- the original installed OS on the system? Windows 7
- an OEM or full retail version? Retail - System builder
- What is the age of system (hardware)? - 4 weeks
- What is the age of OS installation? 4 weeks

My profile should have the rest of my system information. I have tried debugging myself, but couldn't make heads or tails of the problem.

I am also getting an application hand when playing World of Warcraft. I am not sure if the report will show those events from the event viewer log, but if so any help with that would be great also.

Thanks for any help!

rwt

A:Feedback Please

I have checked at least 75% of your many dmp. They all show the same code 1A caused by ntkrnlmp. This is a driver that controls other drivers. We do not replace ntrnlmp as this is a Microsoft driver and rarely the true cause of the problem

STOP 0x0000001A: MEMORY_MANAGEMENTUsual causes: Device driver, memory, kernel
0x0000001A: MEMORY_MANAGEMENT
This memory management error is usually hardware related. See the checklist above. If this occurs while installing Windows, also check the Windows system requirements including the amount of RAM and disk space required to load the operating system.

Download memtest86 and test RAM
RAM - Test with Memtest86+

Update these two drivers
amdxata.sys Tue May 19 13:56:59 2009
Amdxata.sys file description
Productname: Stor Filter Driver
Description: Stor Filter Driver
Company: Advanced Micro Devices

Athrx.sys file description
Productname: Driver for Atheros CB42/CB43/MB42/MB43 Network Adapter
Description: Atheros Extensible Wireless LAN device driver
Company: Atheros Communications, Inc.
Scan with your Anti Virus

SFC /scannow
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

Update outdated listed drivers. If I have inadvertently listed any Microsoft Drivers, they can be ignored.

How to Find Drivers
search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manu... Read more

6 more replies
Answer Match 36.12%

I have a problem with my sound card to where, whenever I hit the talk button, to talk on a microphone, any and all background is played through it as well, such as with games with built in mic buttons such as Counter-strike or WoW, whenever i hit the talk button any noise that i can hear from my headset is played through as well, such as what music I'm listening to, I'm not using speakers so that is not the problem, does anyone have any solutions to this problem? my sound card is Realtek HD audio, Dont know any other information about it... This problem is mostly annoying due to the fact if I have music or or anything loud it makes my voice un-hear able through the mic...
 

A:Feedback Help

If this is a HP computer, please look here: http://www.techspot.com/vb/topic100655.html

Also if it is a HP please update your Mobo field with the HP and model number you have

HP ??
 

4 more replies
Answer Match 35.7%

When I have my laptop plugged into an AC outlet, I get this horrible buzzing sound when listening to music. I have my laptop connected to my home stereo via the headphone jack. When I'm running on battery power it sounds fine.

Anybody????

Thanks,

Cbon
 

A:Annoying feedback

6 more replies
Answer Match 35.7%

battery ran completely, without AC power. Repair within guaranteed, it turned out that the components were not present, yet have to wait three weeks.Everything OK at take-back.

More replies
Answer Match 35.7%

I Got the anniversary update on my mobile an I've noticed the feedback app is missing....
Posted from Windows Central's Universal App (Lumia 650)

More replies
Answer Match 35.7%

Hi guys,

SP2 is out, and its in my critical downloads thing. Now call me a fool, but i decided NOT to turn on Auto updates, mainly becuase i want to find out what sort of bugs there will be, wait for bug fixes and see how it affects systems.



There are many reason to download it, but i'm interested in the reasons not to. If the pros really do outweigh the cons, then i may get it, but i'm not about to install something which will have a potentially HUGE impact on my (newly installed, stable) system.



Before i go download it i'd like to hear from those that have already done so, what sort of problems they are having, whethere the changes are good, how to use setup the firewall correctly etc.

I currently use Norton SystemWorks Pro for virus protection and have Zone Alarm Pro installed for a firewall. Will either of these be affected by SP2 and how? i play online games a lot will i have to expect an increase in ping? anyone know what games will need patches to work/ how to setup the firewall to allow them to conenct? NB: I'm on a DSL connection through a router.

Oh, any anyone with any links to any sites/ or willing to lost with a list of new processes i should kill, please let me know, thanks

I manage 4 computers at home, none of which will get SP2 utill i can be assured it wont "scew them up" if you understand. As much as i like fixing computer problems, i prefer to prevent them too, that way i get more time to do other stuf.

Thanks ... Read more

A:Win XP Pro SP2 Feedback requested

I have my computer setup also not to autodownload, very smart thing to do. I have read some horror stories online about service pack 2. Though I had the same concerns you do, I downloaded it anyway. I had a small problem with my wirless network, computers not getting valid Ip's from the router, Nobody I talked to really helped, including Linksys or Microsoft. It was a rather simple fix though. I heard that Norton does have compatibility issues with service pack 2 though I didnt experience any. Games are running fine! Graphics etc... It does take slightly longer for windows to boot up. I have not really run into many problems. My advice for you is to wait! Although Service pack2 does offer alot of features and better security. It is not critical that you have it, although Microsoft will tell you different.

4 more replies
Answer Match 35.7%

Great operating system, installation time around 90mins. Seemed alongtime this was an upgrade from vista 64 home premium. I suspect the delay was caused from issues with vista, as it was running slow prior to upgrade.

Problems:

ATI drive fails occasionally but restarts ( 9:10 )
Pc Probe error message can't load.
Un-install list will not remove dead links, have to remove via registry.

on the whole, well done microsoft another quality product.

A:Windows 7 feedback

If your vista setup was having problems before, Id suggest doing a clean install.

2 more replies
Answer Match 35.7%

Everytime i try to use my microphone for different things i get loadsa sqeaky feedback from it, When i try to talk to ppl via different things i.e msn messenger/net meeting they can hear me perfectly but i cant hear them at all, all i get is the sound of my own voice through the speakers and then lotsa feedback! can ne one help? thanks
 

A:Microphone Feedback

7 more replies
Answer Match 35.7%

(I posted this in the "Review" section before I noticed this forum so I figured I would post it here also)

I just recently started web programming and I just got my site up with forums and all that fun stuff. I plan to add more later, but I'm trying to get some feedback or suggestions for things I can do. I haven't had success yet because the boards I've posted on have been more of the "your a noob" sites. But I was hoping I could get some feedback. Also, I have forums up so if anyone wants to register feel free, the more people the better

the site is www.the3rdcircle.com
 

A:Website feedback please

16 more replies
Answer Match 35.7%

May seem silly but I cannot get my web cam to work properly...
Went into all kinds of setup stuff to adjust volumes but still getting bad feedback with major echo. Tried lowering the volume through master control but didn't help. Also went in through the control panel to adjust but the voloume bar is inactive...won't let me change mic volume?? What can I do?? Is it my web cam, maybe my speakers?? Tried putting the cam farther away but still no improvement. Think I need to lower mic volume but it won't let me...Please help!
 

A:Microphone Feedback

6 more replies
Answer Match 35.7%

Just wanting to get some feedback about Internet Explorer 8, so far I have refused any updates for this as most of the people I knew had problems to start with when it first came out, and I usually don’t update till the usual start up bugs of a updated version of anything is Ironed out.

Thanks in Advance

Beanie
 

A:Solved: IE 8 Feedback

It hasn't been changed since the final release, so no more bugs are going to be ironed out.

It installed and worked perfectly for me. Most people who have problems with updates have them because they have some sort of malware infection or they have made too many changes to their systems.
 

2 more replies
Answer Match 35.7%

this is my site so far:

http://www.whiteazn.com/test/

its the basic template .... question is, what you think so far, as far as the color templates is going?

dont worry about the fonts ....

what color would you make regular links? links of the menu and all? color of regular text (excluding the menu and all)? text of menu links and all?

any help would be appreciated....
 

A:website feedback please! help?

6 more replies
Answer Match 35.7%

Hi i keep getting feedback thru my speakers, crackle noises, and dont know whats causing it, i have replaced my speakers anmd it still happens any advice would be great i have an acer aspire SA85XP sorry if this is in the wrong forum
 

More replies
Answer Match 35.7%

I've got my domain name and hosting set up, so all thats left is the website now
Here is the layout I've got so far
http://wizardsofwebsites.com/layout.php?page=layout
I am looking for feedback but also have a couple questions.
1. Look at the menu on the top. Now look at the right border of it. See the glitch? Any idea whats causing that? It looks a bit odd with that border missing.

2. The links in the menu are also probably hard to read because the color is close to the background. Any ideas on a different color for the links? And what color the background should change to when you hover them?

Thx in advance!
And please don't complain about the repetitive content
 

A:Layout Feedback/Help

12 more replies
Answer Match 35.7%

I got to be an Office 2010 TPer, and right after they launched it I sent MS feedback about some stuff. Also added - "I know no one there is going to read this but here's my feedback...." Not only did I get an email from someone at MS who said, "Yes, we actually read the feedback", I think they implemented one of my suggestions. Could not freaking believe it. The new feature was for OneNote, to be able to right click and paste more than just text, like photos and other files, which you could not do in 2007.

Before I get carried away with this, let me say that hypothetical influencing a right-click for anything isn't the grandest thing on the planet. Nevertheless, it would be kinda cool to be able to say such a thing when you're dealing with a behemoth like MS.

I assume I could not have been the only TPer who suggested this, and/or maybe MS was planning it all along. Plus even though I did not notice the new right-click options before I sent feedback, there's always the possibility I missed it. But I could have sworn they were not there because it was one of the first 2010 changes I looked for. It was soon after my feedback (I don't even think it was more than a day) that I saw the new right-click paste options. The email from MS didn't say whether they made the change because of feedback, only thing it said was that they read it.

OK, so:
1.) Did MS make changes to office TP via Windows Update like they did with 7 beta? Can't go back and check because I ... Read more

A:How much does MS consider user feedback?

You can interact with their developers on Technet forums, or on the specific blogs for their projects like Win7. They give attention to things which interest them and will often start a dialogue.

Even the excellent MS tech support gave me unbelieveable amounts of time (sometimes overnights) with the purchase of a single retail copy of XP, teaching me clean reinstalls, overcoming bloatware, optimization, virus hunting, debugging, and much more for several years' time - all for $99!

What has most impressed me in my experience with MS is how they interact with learning, prize it, nurture it. They have been some of my best teachers.

So it really shouldnt be a surprise that they finally hit it so right with what may be the greatest creation since the computer itself, Windows 7. But I'm still dazzled.

5 more replies
Answer Match 35.7%

All,

I am currently using Frontpage 2002 to create webpages. I used the "Feedback Form" from the "Page Templates" to create the form. Well, all's well and dandy, but when I click the "Submit" button, it get page not found. I tried adding a URL to the submit button properties but to no avail. My question:

How can I create the form so that when they finish filling in the form and they click submit, it will be emailed to me?

Any help would be greatly appreciated!
 

A:Feedback Forms

7 more replies
Answer Match 35.7%

Hi,

For a year or more now i have had the same problem with my audio equipment. Whether i use headphones and the mic attached to them, whether i use desktop speakers and a stationary mic, I allways run in to the same problem: Whatever sound i hear through either my headphones or my speakers gets transmited through my mic. It isnt a loop because my mic is facing my speakers or anything like that because even if i unplug my speakers and just talk on my mic, the people at the other end of msn tell me they can hear themselves. Now i dont know if what i wrote is particularly clear but if you need any more information or if you would like me to run some tests i would be more than happy as this problem is starting to get quite annoying.

Thank you in advance for your help.

A:Audio feedback help.

Hi Isak

Firstly, have you tried updating your motherboard and (if present) sound card drivers?

Secondly, can you try going into Start>Run>type: dxdiag, hit Enter and run the various input and output sound tests there, looking carefully (changing) at the hardware acceleration you have set and the "Notes" section for any mentioned conflicts.

Lastly, which soundcard/motherboard do you have?

Let us know how that goes.

3 more replies
Answer Match 35.7%

This is a forum devoted to sorting out bugs and making suggestions to improve the O/S.
Yet no statistics have as yet been posted as to what contributions members are proud to have made.
I`ll start the ball rolling....

More replies
Answer Match 35.7%

I am A+ certified and have just started advertising to local people about being able to do "tune-ups" on computers to get rid of viruses, spyware and such. I posted a question on EE about your recomendations for freeware spyware utilitiy and the one that came back, (besides Windows Defender and Ad-aware) was the Ewido Security Suite. I must say, I am familiar with Ewido but I've never been sure about what it does compared to other spyware utilities nor was I even aware that there's a free version of it. So what exactly does it do differently compared with other utilites, what limits are put on it in the free version compared to the full version and what kind of success have you had with it?
 

A:Ewido feedback

janlafata said:

I am A+ certified and have just started advertising to local people about being able to do "tune-ups" on computers to get rid of viruses, spyware and such. I posted a question on EE about your recomendations for freeware spyware utilitiy and the one that came back, (besides Windows Defender and Ad-aware) was the Ewido Security Suite. I must say, I am familiar with Ewido but I've never been sure about what it does compared to other spyware utilities nor was I even aware that there's a free version of it. So what exactly does it do differently compared with other utilites, what limits are put on it in the free version compared to the full version and what kind of success have you had with it?Click to expand...

I downloaded the free 14 day trial about 6 months ago after the trial I was left with about the same functionality as with Adware se personal i.e.I can scan when I want (but cannot set a scheduled scan only manualy) .
Updates are free but cannot set up automatic updates.
There is a very useful right click shell scan option(right click file and select scan with Ewido very similair to Avg free).
as to what the difference is between it and the others I'm not sure but I use Spybot search and destroy,Adware se personal and Ewido one after the other (best to be sure lol) and each pick up threats the others have missed (by the way I don't run them in the same order each time ).
When I get around to it I will be buying the full pack... Read more

2 more replies
Answer Match 35.7%

So I've started choosing my first PC parts. I just wanted some advice on what parts to choose, and feedback or change suggestions of the hardware I've already chosen.
Parts I'm thinking of buying:

Graphics card: GTX 970 Gigabyte 1G
Case: NZXT Phantom 410
Processor: Intel i7-4790
Cooling: Nanoxia Deep Silence 120mm Ultra-Quiet
Hard Drive: Western Digital Blue WD10EZEX 1TB

So I still need some more parts obviously, and it would be great if you guys could suggest a motherboard, RAM and a power supply that are compatible with all this stuff (or with anything you suggest)
Also, could someone tell me what performance I can expect from this when playing games?
Thanks-
 

A:PC uild feedback and help please

I assume you intend to play games with this system.

First thing I see is the WD blue drive. The blue series is not a performance hd; if you have to have a mech hd, then go with a black series drive OR a raptor drive. A much better option would be a ssd drive for the system drive and a WD black drive for backups, data, etc.

As for a mb, I use either asus or gigabyte boards; either one with the z97 chipset will be fine.
 

1 more replies
Answer Match 35.7%

My next build is going to use a Athlon XP 2100+ I would like some feedback on the components I’m thinking of using
Thanks in advance Bob 0<

CHAINTECH Motherboard for AMD Processors, Model# 7NJL1-APOGEE NFORCE2 ATX -RETAIL
Specifications:
Supported CPU:AMD Socket A Duron/Athlon XP
Chipset:NVIDIA nForce2 SPP + MCP
FSB:200/266/333MHz
RAM:3x184Pin DDR 1600/2100/2700/3200 Dual Channel DDR
IDE:UDMA 66/100/133 PCI IDE up to 4 Devices
Slots:1xAGP (4x8x) 5x PCI and 1x ACR Slot
Ports:2xPS2,2xCOM,1xLPT,1xFDD, and Audio Ports
Onboard Audio: CMedia 8738 LX
Onboard LAN:10/100 MBS

KINGSTON KVR400X64C25/512 512MB 400MHz DDR PC3200 DIMM RAM CL2.5
Specifications:
Type: DDR
Capacity:512MB
Speed: 400 MHz PC3200

DDRMaxx -- Aluminum Blue Anodized Memory Heatspreader Retail
Aluminum Heat Spreader
Blue Anodized for a nice finished look.
HIGH CONDUCTIVTY THERMAL PAD
Easily installs with the provided Spring Clips
Fits PC100/133 and DDR memory modules
Cools down your Memory module for consistent performance

VGA CHAINTECH GEFORCE4 TI4800SE128MB VGA & TV-OUT, DVI OUT. RETAIL BOX
Specifications:
GPU:NVIDIA® GeForce4™ Ti4800
MEM:128MB DDR SDRAM
275 MHz Core Clock
550 MHz Memory Clock
Max Res: 2048x1536 32 bit 60Hz
Fill Rate: 4.8 Billion Texels/ sec Multibuffering (double, triple, quad) for smooth animation and video playback, Microsoft DirectX optimizations and support- Complete OpenGL 1.3 and OpenGL support- WHQL-certified Windows XP, 2000, ME, 98, 95- Com
CPU F... Read more

A:Feedback on a new build

6 more replies
Answer Match 35.7%

I just installed my new video card. A Sapphire Radeon HD 4670 and I'm using HDMI.

I disabled HDMI audio on my monitor and disabled HDMI audio from sound devices. But I get echos and feedback through my headphones.

Anyone know how to fix this?
 

More replies
Answer Match 35.7%

Hello all, i'm afraid i'm in need of some professional help.
I have searched the forum for an answer but nobody seems to have had this exact prob.
I have a sound coming through my speakers which sounds like a fast morse code type noise and this sound seems to change with the computers hard drive, eg when the hard drive speeds up the sound changes. I used to have this sound when i first had the computer at which time i was using onboard sound, but then i brought an edirol FA-66 which seemed to fix the problem but i've just brought a pair of KRK VXT4's speakers and the sound is back! The sound even occours when the volume it turned down and when its turned up it doesnt get any louder, its just a constant din. Another abnoramality is the sound doesnt come through the headphones only through the speakers and these sennheiser headphone should match these speakers in quality. I've tried all the usual fix's like unplugging but nothing seems to help.
Does anyone have any idea of what this feedback is and how it can be fixed?
Thanks in advance.

Setup:

Winxp
2gb 6400
asus p5b deluxe
fa-66 sound card
krk vxt4 speakers
 

More replies
Answer Match 35.7%

Ref. Combofix
I'm fine with this capable program clearing the temp directories. That would be "\tmp" and "\temp".
 
But it should be mentioned in the documents and ref materials that Combofix will also treat
"\x" as a temp directory and CLEAR IT. Perhaps others? I don't know. It should be clearly delineated behavior.
 
This hidden feature wiped 50GB of data I was using during an ISP switch. It will take days to recover.
It spent over six hours scanning the files and then promply erased them all.
 
Yes, I understand "Don't use the program unless directed to" or some such. But that is no cover for
an omission of functionallity this large. Check the forum logs for this to be mentioned. I've not seen it.
 
The only temp directories-folders are "\tmp" and "\temp" as set in the environmental variables.
 
Thanks for reading..
dsz
 
(60K line log file of deletes.. sigh.)
 
ref:---
It should also be noted that when you run ComboFix it will automatically delete files from the following locations:
Windows Recycle Bin
Temporary Internet Files
Temp Folder

A:Joined for feedback

Your feedback is noted.I can tell you that temp folders are a common hiding place for malware. I would like to say more but all discussions about Combofix...how it works, the routines it performs, what it can or cannot do, what the log results mean, future plans, development, etc, are in private areas not for the general public to read. Why? Safeguarding ComboFix from malware writers is necessary and important so that we can continue to use it without attackers having knowledge how to defeat it. Everything we discuss can be read by the bad guys. Yes, they read these forum topics looking for clues (knowledge) on how to circumvent our tools and removal techniques. We don't want to provide any information they can use against us so we deliberately do not provide specific information on the specific inner workings of our tools and how we use them in areas where attackers can see that information. As such, our discussion in public areas is limited and sometimes may appear vague or not fully address a specific question so it should not be taken personal.

1 more replies
Answer Match 35.7%

Is there a place that we can leave feedback or requests for the ATA product?

There are a few things i would like to see changed.  

1.  Alerting
We get alerts during backup windows that the ATA cant keep up but it doesn't seem to have anything to do with CPU or RAM.  In addition, we have no users in the system at that time so i find it very hard to believe
that this is true.  I would like to set time windows where we can exclude these alerts or maybe thresholds where if it is seeing that for 5 minutes, 10 minutes etc.
2.  Email Audience
I would like to be able to say these types of emails go to this distribution list and those go to another so that we keep the number of alerts the team gets down a bit.  
3.  Suspicious Activity
When we get an alert warning of suspicious activity and click the link to take a look, the first thing you have to do is answer whether it is normal or not, but we cant click the link to see the suspicious activity unless
we open the excel file in the email.  This should be adjusted.  

More replies
Answer Match 35.7%

Hi all. Recently (within the past 2 weeks) I have started to have the following problem: I am getting feedback thru my speakers from my microphone. As in, when I talk, my voice comes out the speakers. It does not reproducce the words clearly, just mumbles. If you bump the mic it causes a thump thru the speakers. I have tried muting the microphone in the playback controls and all that happens is I can't be heard on the other end. If I turn down the volume on the record side nothing happens. I have tried muting and desreasing volumes of all the other components in both playback and recording and nothing changes the feedback. If I turn the microphone boost off that helps alot, but then the people on the other end can't hear me at all. I am having the same problem on 2 computers. My main is a Pentium 4 3.2 with 2gig ram, WinXP home service pack 2, SoundBlaster Live! and a generic handsfree microphone. My other system is a Semprom 2600 not overclocked, 1.5gig ram, WinXP home service pack 2, SoundBlaster Audigy 2, Altec Lansing headphones/microphone combo.

If anyone has any possible solutions to this issue, any help would be much appreciated.
 

A:microphone feedback

Take a look into your Sounds and multimedia options under Control Panel to see if the Mixing check box is checked. This is the most common problem. You'll just have to check the Microphone box. (within record settings, not playback)..
 

2 more replies
Answer Match 35.7%

Hello all, I have changed my mind again about building my new rig. Does anyone have any negative comments for using this for a gaming machine?

http://www.newegg.com/Product/ComboDealDetails.aspx?ItemList=Combo.155232

The CPU I am definately sold on, but the motherboard I have one con-the on-board graphics. I am going to disable it, but will that cause any performance issues. The solid caps, north and south bridge are the most important here.

Any thoughts?
 

A:Solved: Need feedback for new rig

10 more replies
Answer Match 35.7%

Hey everyone, so glad i found this forum.

Anyway straight to the point, I am currently using a Plantronics headset with 2x 3.5mm jacks, I am running it through a usb adapter so taht i can still run music through my speakers. The problem I am noticing is that there is power feedback coming into the headset.

I know it is power related feedback as when i move my usb mouse in different directions the frequency of the feedback changes. So does anyone have an easy solution for this, i would prefer to lose the adapter all together. I originally used the onboard sound card to achieve me goals, but my creative card has taken to hiding the onboard audio; can't even be seen in device manager. Is there a way to enable it.

Thanks in advance for any help.
 

More replies
Answer Match 35.7%

Processor = Intel® Core&#8482;2 Quad Q9450 (4 X 2.66GHz) 1333MHz FSB/12MB L2 Cache

Memory (RAM) = 4GB CORSAIR XMS2 800MHz - LIFETIME WARRANTY! (2x2GB)

Motherboard = ASUS® P5K SE: DDR2, SATAII, PCI-e x16, 2 PCI, 3 x PCI-e x1

Operating System = WINDOWS® VISTA ULTIMATE SP1 (32 bit) (inc CD & Licence)

USB Options = 8 x USB 2.0 PORTS (6 REAR + 2 FRONT) AS STANDARD

Hard Disk 1 = 500GB SERIAL ATA II HARD DRIVE WITH 8MB CACHE (7,200rpm)

Hard Disk 2 = I will be buying an external drive to add on later

CD/DVD Drive = 20x Dual Layer LightScribe DVD Writer ±R/±RW/RAM

Graphics Card = 512MB GEFORCE 8800GTS PCI Express + DVI + TV-OUT

Sound Card = ONBOARD 8 CHANNEL (7.1) HIGH DEF AUDIO (AS STANDARD)

Memory Card Reader = INTERNAL 52 IN 1 CARD READER (READS XD, MS, CF, SD, etc)

Power Supply & Case Cooling = 450W Quiet Dual Rail PSU + 120mm Case Fan

Processor Cooling = 450W Quiet Dual Rail PSU + 120mm Case Fan

TV Card = DIGITAL TV CARD (Dual Tuner!) (Watch/Record Freeview on PC)
-----------------------------------------------------------------------------------------------------------------------------

I know you can't future proof anything, but I sincerely hope the above build will last me loads
of years and upgradable too. Anybody in the know advise on this build and do you think it's an
ok system to last a while?

Is the graphics card an OK choice. The thing is if I opt for a better one it's telling me to upgrade
my power supply to 600+w and I... Read more

A:Here's my PC build......any feedback please about it

10 more replies
Answer Match 35.7%

I have a pair of Razer Moray headphones running through a Razer Lycosa Keybaord which is connected into the back of a PCI sound card. I know a fair bit about computers, but I am no wizard.
My issue is this; when nothing is playing, no sound; I get terrible feedback "buzzing". It is continuous until I move my mouse (Also a Razer, not sure if that matters), when I move the mouse, it turns into a beeping sort of sound. It was funny for the first ten seconds, making buzzing songs moving my mouse, but it is now very frustrating. I have tried several other headphones, some I have plugged straight into the PC; which improves it slightly, but my Moray's are my choice headphones, because they sound fantastic besides this feedback.
If anyone knows what it might be, let me know.

Other attempts at fixing I have tried-
Plugged into motherboard sound; feedback is gone, BUT; I wish to use my soundcard as its sound quality is much greater than my Motherboard. In my opinion at least.
I have tried turning off other programs, including anti-virus for 10 seconds to see if it would remove the feedback, no success.
Unplugged different bits of hardware, mouse, Ext. Hd. etc. No success.

Thanks to anyone who provides assistance!

BTW: I use Foobar2000 for my mediaplayer. Not sure if that makes any difference.

A:Terrible feedback

I use Windows XP Sp3. Forgot to mention that. Computer is a 2.6 AMD duel. 8600GT 1gb. 2gb RAM and a 250gb Harddrive. I can provide more information if anyone needs it.

1 more replies
Answer Match 35.7%

hey guys
this is my first post here as i woud need sum help.
well im building my first pc pretty soon and just wanted to help and feedback to what u guys think of this setup and if it will all be compatible and stuff liek that.

AMD Athlon64 3200+ (939) $258.00
Gigabyte GA K8NS ULTRA 939 $165.00
PQI Turbo DDR Dual Channel (2X512) PC3200 400Mhz $145.00
Seagate Barracuda 250GB SATA 7200Rpm 8MB $199.00
Leadtek 6600GT DDR3 128MB AGP DVI VGA $273.00
Compro Videomate DVB-T300 Digital & Analogue $132.00
LG CD/DVD Combo $60.00
X-Blade Silver Case $50.00
Thermaltake 430Watt Power Supply $59.00
Logitech X-530 5.1 Surround Speakers $99.00
Microsoft "Elite" Wireless Keyboard & Mouse $99.00
LG 19" 12ms LCD Monitor $499.00
Canon PIXMA MP130 All In One $152.00
Gigabyte 3D Rocket Pro Silent Cooler $75.00

thse are in australia dollars and all parts are from teh same shop as i find it very cheap.

the thing im having a problem choosing between is if i should get agp or pci express. it wudnt really bother me to keep agp cause im not much of a serious gamer,jus the occasional games.

Gigabyte K8NF-9 Nforce4 (939) (PCI-Express) $149.00
Leadtek PX6600GT Extreme 128MB (PCI-Express) $268.00
these would be the mobo and graphics card if i choose pci express but i havent read too many good reviews about this mobo also as it has less good features as du... Read more

A:building first pc, sum help and feedback plz

PCIe is the future but right now there is very little performance difference between the two . If there is no price difference I would go PCIe just because it will be easier to upgrade two years from now plus yoiu'll have the PCIex1 expansion slot.
 

2 more replies
Answer Match 35.7%

Hi I recently got a set of speakers for my new PC. I have only been using headphones on it without a problem but when I plugged the speakers in I get a very bad white noise feedback.

You can still hear the sound so the speakers are working, and when plugged into my phone they work fine whithout the feedback. I am also using beats headphones so I am using the exact same jack to connect the speakers and headphones.

I've tried all solutions I can find and all drivers are up to date, so if anyone has any ideas of what is going wrong I'd be really thankful.
 

A:Speaker feedback

13 more replies
Answer Match 35.7%

PCPartPicker part list: http://pcpartpicker.com/p/Ho4W
Price breakdown by merchant: http://pcpartpicker.com/p/Ho4W/by_merchant/
Benchmarks: http://pcpartpicker.com/p/Ho4W/benchmarks/

CPU: Intel Core i5-3470 3.2GHz Quad-Core Processor ($149.99 @ Microcenter)
Motherboard: Gigabyte GA-B75M-D3H Micro ATX LGA1155 Motherboard ($72.99 @ Newegg)
Memory: Corsair Vengeance 8GB (2 x 4GB) DDR3-1600 Memory ($47.99 @ Amazon)
Storage: Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive ($73.49 @ Outlet PC)
Storage: Samsung 840 Series 120GB 2.5" Solid State Disk ($94.99 @ Amazon)
Video Card: Gigabyte Radeon HD 7850 1GB Video Card ($179.99 @ Amazon)
Wireless Network Adapter: Rosewill RNX-N150PCe 802.11b/g/n PCI-Express x1 Wi-Fi Adapter ($14.99 @ Newegg)
Case: Raidmax ATX-248NWU (Black/Blue) ATX Mid Tower Case ($48.20 @ Amazon)
Power Supply: Corsair Enthusiast 650W 80 PLUS Bronze Certified ATX12V / EPS12V Power Supply ($69.99 @ Newegg)
Operating System: Microsoft Windows 8 Full (64-bit) ($99.99 @ Newegg)
Monitor: Acer V223WL 60Hz 22.0" Monitor ($129.99 @ Amazon)
Keyboard: Gigabyte Force K3 Wired Gaming Keyboard ($27.99 @ Amazon)
Total: $1010.59
(Prices include shipping, taxes, and discounts when available.)
(Generated by PCPartPicker 2013-03-03 23:53 EST-0500)

Any suggestions about this build would be appreciated, im about ready to buy.
 

A:Build Feedback?

7 more replies
Answer Match 35.7%

Planning on building a gaming PC since the one I have now is just a mass produced PC you can buy at Best Buy or something..

I don't plan on hand building this PC, because I really don't want anything to go wrong. Are sites like iBUYPOWER and CyberPower reputable places to buy from and decent in price?

I want to be able to play games like Brink and BC2 on 1650x1080 with high settings. The graphics card I have now, nVidia 9600 GT, is kind of old and overheats easily. My price range for the overall PC is under $1700, but I want it more around $1500.

I'm going to list two PCs and their parts. Maybe you guys can tell me if this is part is necessary or if it is even compatible with the other parts.

PC #1:

Code:
Case 1 x NZXT Phantom Full Tower Gaming Case-White
Processor 1 x Intel® Core? i7 970 Processor (6x 3.20GHz/12MB L3 Cache)-
Processor Cooling 1 x Asetek 550LC Liquid CPU Cooling System (Intel)-ARC Dual Silent High Perfornamce Fan Upgrade (Push-Pull Airflow)
Memory 1 x 6 GB [2 GB X3] DDR3-1600-Corsair XMS3 Dominator w/DHX technology
Video Card 1 x NVIDIA GeForce GTX 460 - 1GB - EVGA Superclocked - Core: 763MHz-Single Card
Motherboard 1 x ASUS P6X58D-E-
Motherboard USB / SATA Interface 1 x Motherboard default USB / SATA Interface-
Power Supply 1 x 650 Watt -- Corsair CMPSU-650TX-
Primary Hard Drive 1 x 750 GB HARD DRIVE -- 64M Cache, 7200 RPM, 6.0Gb/s-Single Drive
Optical Drive 1 x 24X Dual Format/Double Layer DVD±R/±RW + CD-R/RW
Sound Ca... Read more

A:Need help/feedback on building a PC

Just realized the PC I have now has 650w PSU, so that will knock off about $70.Click to expand...

I doubt they will sell you a PC without a power supply. How would they be able to warrant it when they don't know the condition of the power supply to be used?

If you used their website configurator, I don't think it will let you add incompatible hardware.
 

9 more replies
Answer Match 35.7%

Hi:

I'm having issues keeping quality from downloaded AVI and other video files when burning to DVD.

Any hints or suggestions welcomed for software or codec pack combinations.

TIA

A:Would appreciate DVD burning feedback

When you download the AVI, is it meeting your quality requirement?

If not, look elsewhere for the AVI's. If it is, Then the problem must be in the burning. Depending on what you are using to burn the DVD's, there should be settings to burn at different speeds. Generally the slower the speed you select, the better quality the DVD will be.

What are you using to burn?
Cheers,

1 more replies
Answer Match 35.7%

Is This Build Suitable Enough To Run PC Games Such As COD? Minecraft? Arma 2, DayZ? Its A $2,500 Build, I Put It Together Through Newegg.. Is It All Compatable?

P.S This Is Going To Be My First PC Build I Want This PC To Last Me Forever!

Case - Corsair Obsidian Series 650d
Motherboard - GIGABYTE G1.Sniper M3 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard
Ram - G SKILL Sniper Gaming Series 16GB
CPU Cooler - Corsair H100
CPU - Intel Core 17-2600K Sandy Bridge 3.4GhZ 3.8GhZ Turbo Boost
SSD - 240g Mushkin SSD
SSD - 120g Corsair ForceSSD
PSU - SILVERSTONE Strider Gold ST85F-G 850W ATX 12V v2.3 / EPS 12V 80 PLUS GOLD Certified 100% Modular, Active PFC Power Supply
Video Card - GTX 680 Superclocked Edition
Hard Drive - Seagate Barracuda Green ST1500DL003 1.5TB 5900 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
DVD Drive - ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner - Bulk - OEM
Monitor - ASUS VS Series VS238H-P Black 23" 2ms HDMI LED Backlight Widescreen LCD Monitor
Thanks, In Advance!

- Skarekrow98
 

A:New PC Build, Feedback?

6 more replies
Answer Match 35.7%

Hi,I am currently experiencing extremely slow internet access for about a few weeks now. I have run a number of antivisuses but nothing is showing up. I have also tried another computer for internet speed etc but this seems fine. I was wondering if anyone would have a chance to review this Hijackthis log.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 11:22:09, on 10/08/2009Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\ibmpmsvc.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\ThinkPad\Bluetooth Software\bin\btwdins.exeC:\Program Files\Symantec AntiVirus\Smc.exeC:\Program Files\Intel\Wireless\Bin\S24EvMon.exeC:\Program Files\Common Files\Symantec Shared\ccSvcHst.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\System32\IPSSVC.EXEC:\Program Files\Altiris\AClient\AClient.exeC:\Program Files\Altiris\Altiris Agent\AeXNSAgent.exeC:\WINDOWS\system32\ccsrvc.exeC:\Program Files\Altiris\Carbon Copy\shellker.exeC:\Program Files\Infor... Read more

A:HijackThis Log Feedback

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Answer Match 35.7%

StartupList report, 10/25/2005, 9:07:22 PMStartupList version: 1.52.2Started from : C:\HJT2\hijackthis\HijackThis.EXEDetected: Windows XP (WinNT 5.01.2600)Detected: Internet Explorer v6.00 (6.00.2600.0000)* Using default options* Including empty and uninteresting sections* Showing rarely important sections==================================================Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\Explorer.EXEC:\Program Files\Toshiba\Touch and Launch\PadExe.ExeC:\Program Files\Java\jre1.5.0_05\bin\jusched.exeC:\PROGRA~1\NavNT\vptray.exeC:\WINDOWS\System32\ctfmon.exeC:\Program Files\CA\eTrust EZ Armor\eTrust EZ Firewall\ca.exeC:\Program Files\NavNT\defwatch.exeC:\Program Files\NavNT\rtvscan.exeC:\Program Files\Norton Utilities\NPROTECT.EXEC:\WINDOWS\system32\ZoneLabs\vsmon.exeC:\WINDOWS\System32\MsgSys.EXEC:\Program Files\Kazaa Lite K++\KazaaLite.kppC:\Program Files\ResHacker\ResHacker.exeC:\Program Files\Internet Explorer\iexplore.... Read more

A:Can I Recieve Some Feedback

What specific problem are you having?

1 more replies
Answer Match 35.7%

Hi i install like 7 day internet explorer 9 beta and on my program show feedback tool install , today my windows update show available update for internet explorer 9 and today install me another feedback tool why , i can delete the version old ? or i can delete both and i need stay on both

A:2 feedback tool

Welcome
That update that you just got is new. Keep both the updates. The space that one update takes is nominal, no space lost.

8 more replies
Answer Match 35.7%

Hi All I have a emachines T3882. I know a entry level system. I am attempting to hook up my computer to my stereo for music playback. Problem is there is a hum or feedback noise. I know it's my system as I have a second computer that I hooked up in the same manner with no issues. I even tried a new sound card same issue. The audio is on board. Drivers are good as I do get sound from my very cheap desktop speakers. Any suggestions would be a great help as this is very frustrating to me.

Thank You
 

More replies
Answer Match 35.7%

I am puzzled about how the feedback system works. The feedback buttons are everywhere and working fine even when there is no net connection but my doubt is whether it is really reaching the authorities since there is no auto or other response from microsoft.

A:Feedback for windows 7

Hello Param,

Welcome to the Seven Forums.

Haven't ever tried it without a net connection, but when I use it I see a spike in upload bits, so am assuming they're getting it. MS says it has received lots of feedback though.

Hope you enjoy your stay.

Gary

4 more replies
Answer Match 35.7%

Just curious if any one else has been sending feedback to MS about issues they come up with? This may be Tin Foil Hat territory, but will sending feedback 'flag' you with MS?

(If you're not a registered member etc. I know the data is supposed to be anonymous... still, this is MS we're dealing with )


See: http://www.sevenforums.com/tutorials...microsoft.html

A:Sending Feedback

I think MS has that little proviso in all their beta and pre-beta programmes.

9 more replies
Answer Match 35.7%

Hi guys,

Basically I'm making some let's play YT vids and I have a Roccat Kave 5.1 SS headset. I get annoying feedback when I speak through the mic.

I used to use the same mic as Tobuscus the Yt'er but still I got feedback.

I'll list what I've already tried..

- Turning the Decibels (Making mic recording output louder but creates unnecessary feedback)
- Recording externally in a different software like Audacity and trying to turn it up (Annoying feedback because of decibels)
- Checked for driver updates etc.
-Same difference in both stereo/5.1 headsets.

My volume is loud enough-ish but it's just the feedback.. Watch this vid and you'll see:

https://www.youtube.com/watch?v=HiGr...s&feature=plcp

Thanks.

EDIT: And on my sound mixer my headphones are controlled by the overall speakers. Even when I turn the sound down via my head set the sound on the system follows which shouldn't happen.

A:Mic has feedback and really shouldn't..

Bump.. anyone?

1 more replies
Answer Match 35.7%

Hey guys, just wondering what games support good force feedback for a Microsoft Force Feedback 2. I got the controller for $50 several months ago and hardly ever use it. if I had some games that have good force feedback to them, it would get more use.

~Mike
 

A:Force Feedback?

I would assume that most racing games made by Microsoft support it, but I don't really know.

A fairly general rule is that racing and flight games have forces, but fps / strategy / role playing do not. - this came from a Logitech site.

Alright, I found some info at the microsoft site...

Compatible games for Force Feedback 2:

COMBAT FLIGHT SIMULATOR 2
DELTA FORCE 3: LAND WARRIOR
F1 2001
FLIGHT SIMULATOR 2002
GRAND PRIX 3: SEASON 2000
MECHWARRIOR IV: VENGEANCE
MECHWARRIOR IV: BLACK KNIGHT
MIDTOWN MADNESS 2
NEED FOR SPEED: MOTOR CITY
RALLY CHAMPIONSHIP XTREME
SUPERCAR STREET CHALLENGE
FREELANCER
Click here for the site I got it from.
 

1 more replies
Answer Match 35.7%

I upgraded from 6100mcp mobo (GA-K8N51GMF-9)
http://www.gigabyte.com.tw/Products...w.aspx?ProductID=1939&ModelName=GA-K8N51GMF-9

to
NVIDIA nForce4 Ultra / SLI GA-K8NF9 Ultra(Rev 2.x)
http://www.gigabyte.com.tw/Products....aspx?ProductID=2268&ModelName=GA-K8NF9 Ultra

new one has something called SLI chip set (but only 1 16x slot and 2 1x slots)
what is the difference between these 2 mobos ?
 

A:Motherboard Feedback

the SLI chipset means that the second board you mentioned has the ability to support 2 nvidia graphics cards
 

1 more replies
Answer Match 35.7%

This is how it went.

1. Had to do windows update three times before it got them all. I had just done the other day the updates for march. The first update had 8 updates in it. Update number two had one update in it. Update number three had one update in it.

2. Had to do the WGA and did pass.

3. Then the SP1 update showed up in the Window Updates and started the download. Size was about 175.mb.

4. Had to reboot after the install. During windows shut down it stop to do some more installing of the SP1 update. It has 3 stages.

A. Stage one went somewhat fast.
B. Stage two went real slow up to about 12% then went fast and stop and stalled at 100% for some time.
C. Never seen Stage three.

5. Os rebooted and during the restart of windows just before the desktop shows up it started installing Stage three and went somewhat fast. After the desktop came on they was a lot of hard drive activity.

6. The first thing that I seen is that AVG did not restart. I just started it my self and all was good.

Things I seen after install and reboot.

I now have this icon in the lower right about some Customer Experience program that want's to run but you have to say yes to turn it on.

Under the Device manager I now have an error under Built-in-Infrared Device. ( No big deal)

Under the Task manager my Processes came back up to 54 and memory is running at 50% up from what I had it dwon to, 41 processes running & Physical Memory is 33% so it looks as if it went back in and tur... Read more

A:This is how SP1 went. Good. Let's have your feedback.

My experience: Its runs faster and uses less memory and takes awhile to install if you have been using quite a few programs theres also that driver-reinstall glitch after installing SP1.

99 more replies
Answer Match 35.7%

Microsoft have now sorted out the bug in the desktop icon for "Feedback Tool". MSDN and Technet subscribers can now submit bugs through this. You need to have activated with a key provided by either of those programs.
You must sign in through
http://connect.microsoft.com/InvitationUse...=MSDN-D7QX-9PRC

You can then start to use the "Feedback Tool"

A:Desktop Feedback bug

Finally. Thank you for the update Dave.

1 more replies
Answer Match 35.7%

does anyone know where I can get one?
it was made by logitec a while back.. I think it was called "immersion" or something like that
it gave tactile feedback as you performed various operations
 

A:'feedback' mouse

Almost any computer store have them or can order them. I bought one from my local yocal computer store here for 7 bucks one day, it was USB and everything. And yes it was a feedback mouse, it even came with a cheesy game so you could try the feedback out.
 

1 more replies
Answer Match 35.7%

Hi folks,
I've been hearing alot about firefox but being a newbie I am "paranoid" about downloading anything. So with so many of you out there with more knowledge, what can you tell me about firefox? I currently use IE but the press on firefox seems pretty good. Any and all feedback is welcome.
 

A:IE or Firefox- Feedback

14 more replies
Answer Match 35.7%

What is the best way (forum somewhere?) that we can use to provide feedback to MS about Win8? A Google search sent me to connect.microsoft.com, but that isn't helpful. Nor are any of the other search results.

Maybe MS doesn't want to hear from their users. hehe.

Thank you.

A:How do we send feedback to MS?

Does this link help?

4 more replies