Tech Problem Aggregator

xbox 360 extender configuration error

Q: xbox 360 extender configuration error

Hi
Having problems with connecting to my xbox 360

main problem is when media center is configuring extender and computor it ticks the first two boxes but on the configuring extender settings it take a long while before it comes up with

CONFIGURATION ERROR

An error was encountered while configuring your computter for use with this Extender.

Have tried the deleting of Certifiacate in mmc - still does not work
any clues please

Jeff

A: xbox 360 extender configuration error

I too am having the same problem but i don't even get the first tick.
Its not my Anti virus Firewall issue.
It is a modem/router port firewall issue.
What modem are you running?

3 more replies
Answer Match 78.54%

i was adding the xbox extender on my computer. i have already gotten the 8-digit code and went into the xbox and put in all of my wireless network settings. my computer sees the xbox and vice-versa.. i have allowed media sharing on my computer settings...
-when i go to the media center, after i enter in the code, it goes through the checklist... "configuring computer settings", "searching for extender" but it keeps failing at the "configuring extender settings". any suggestions???

More replies
Answer Match 66.36%

Hello, My Vista Ultimate box will not recognize the Xbox 360 as a Media Center Extender. I do see the Xbox 360 in my network devices, but i do not see the install option. Additionally, it will not find the Xbox through the Extnder wizard in Media Center. I have network discovery, file sharing and media sharing enabled.

However, i am able to UPNP share via Windows Media Player. Please help.

A:Xbox 360 Extender

Did you try to run the wizard on the xbox first?

4 more replies
Answer Match 65.52%

Hi all,

First of all thank you for looking at my thread.

I am using a Belkin F5D7230C router and I keep getting a extender not found message when I try to add one through the windows media centre setup.

On the xbox, I get a connected status on the network, internet and xbox live but it fails under the PC connection and windows media center.

I have the xbox connected to the back of the router via a ethernet cable as well as my two personal PC's.

I am using widows vista home edition, I have enabled UPNP on my router and I can see two computers and the xbox on the network which are plugged onto the router, network discovery is on and I have pinged my xbox and i get no reply's.

Other than this I'm stuck, hoping someone can help!

cheers
makarini
 

More replies
Answer Match 65.1%

I'm running Vista Home Premium 32-bit and I'm trying to connect my Xbox 360 as a media center extender. I followed the instructions to the letter, but the Media Center software tells me it can't find the extender. UPnP is enabled, all the Media Center services in services.msc are enabled, and I'm only using my router as a firewall.

I spent an hour with one of the Xbox support people, and he couldn't figure it out. I know my computer sees my Xbox since the 360 shows up on the network map in the Network and Sharing Center. I've opened all the ports I'm supposed to. When I test the media connection from the 360, it fails at "PC selected".

Anyone know how I can make it work?
 

A:Xbox 360 media extender won't connect

Nobody has an answer?
 

2 more replies
Answer Match 65.1%

So, i recently got an Xbox360, and one of the key reasons i bought it was the Media extender feature.....

but im having probems setting it up. i go on the xbox...get the code and attempt to plug it into the media center...it goes through....but when im at the screen where there is a checklist, the setup stops and says that theres a probelm....it doesnt specify the problem whatsoever. so does anyone have any ideas on what i can try?

Am running vista homepremium
 

More replies
Answer Match 65.1%

Hi,
This is my first post, so i'd like to start off by saying hello I'm reallying liking the information on this forums so far.

Anyway down to bidness..

I recently had an issue with my xbox 360 extender after disabling one of the media center extender services in vista x64 ultimate. After trying trying to connect to the media center service i got this error:
Connection Failed
The Xbox 360 cannot connect to the Media Center based PC. Make sure the Media Center based PC is turned on and connected to the network. If you continue to see this error, check Media Center Extender Help on your Media Center based PC.

Did a little digging and found this MS KB which resolved my problem. Hope it is of some use to you guys.

Article 932163

A:Xbox 360 Extender: Connection Failed

I neglected to mention that i recieved the error after re-enabling the PnP-X-IP Bus Enumerator service.

4 more replies
Answer Match 65.1%

Hi All,

I am having problem setting up my xbox 360 connecting to my Xbox Media Center. I have been reading and reading online, but can't find the answer. My current setup:
Xbox 360 Elite
D-Link (Dir-655) gaming router
PC running Vista Ultimate
Have ports forwarded to PC
Windows Media have Sharing enabled
Enabled wireless G only
Have all other wireless devices segragated on different router

It is weird I can go to the dashboard and go to Windows Media Center and view my content, but when I try to view my songs from playing a game nothing is there. I have tried running the Xbox media connection test and it fails at PC. I have went through all the troubleshooting test and have found nothing to help. I am thinking it is something simple, but I have not found the answer. Xbox Live works just fine. Could anyone help?
 

More replies
Answer Match 64.26%

I am using Windows 7 Ultimate x64.  This is a retail copy.  I had previously set up Windows Media Center and successfully set up my Xbox 360 as a Media Center Extender. After a long hiatus of using Windows Media Center, I went to watch a movie in my media library through my Xbox 360.  It would appear to initially connect and then show the Windows Media Center loading screen and say "Contacting..."  After about 30 seconds, it would display an error asking me to make sure my Windows Media Center PC is turned on (it is).  I ran the Windows Media Center network test in the Xbox 360 and it tested fine. I attempted to delete the Media Center Extender in WMC and set it up again, but it always fails with an error "An error was encountered while configuring your computer for use with this Extender" at the part where it says "Configuring your Extender". I looked in the Event Viewer under the Media Center section and found event ID 543: Log Name:      Media Center Source:        Microsoft-Windows-Media Center Extender Date:          3/3/2010 10:13:20 PM Event ID:      543 Task Category: Configuration Level:         Error Keywords:      User:          WILL7\swsander Computer:   ... Read more

More replies
Answer Match 64.26%

I have been tearing my hair out for 2 days now trying to figure this out.

All I want to do is connect my xbox 360 in my living room to my xbox through Media Center and watch some movies on my computer on my living room TV.

But it simply is not working. I get the error "Cannot Set up Extender" every single time i input the code into my computer that my xbox gave me.

But, my dad's computer (windows 7 ultimate x86, connected to the network with ethernet JUST LIKE ME) works perfectly fine and connects instantly. And so does my netbook with the same OS but on wifi

I have been doing everything that google has been telling me through my search results. I have so far narrowed it down to a problem with my computer.

One problem I've been noticing is when I go on my windows firewall and enable programs, Media Extenders is always unchecked! I check it off on private and public and then try connecting again, it doesnt work, and then it gets unchecked again! I have also tried turning off my firewall and uninstalling Kaspersky from my computer. No help.

So, does anyone have any insight?

A:Cannot connect to Media Center Extender (Xbox 360)

Hi,
I did a google search and came up with this...See if it helps...If not and you would like to look for other possible solutions, go to Google and type in "cannot setup extender"...


You tried to set up your Xbox 360 console as a Media Center Extender. However, the Setup program did not start, so you cannot install the Media Center Extender for Xbox 360.

Note When you run the Setup program, your computer may experience a spike in the CPU usage because a process called DVCSetup.exe is using a high percentage of the CPU capacity.

To have us fix this problem for you, go to the "Fix it for me" section. If you’d rather fix this problem yourself, go to the "Let me fix it myself" section.

6 more replies
Answer Match 64.26%

Running Win 7 Ultimate 64
BRAND NEW XBOX Wireless 250gb and Windows Media Centre
After entering the 8 digit code on my Windows 7 Ultimate PC in the extender setup, I get the "Configuration Error" "An error was encountered while configuring your computer for use with this Extender.".
Happens every time the same way. - the "Media Center Extender Service" service gets disabled. It is running under the "Local Service" account. I can set it to "automatic start", and then re-start the service, but as soon as I go through the Extender Setup, and it fails, the service is disabled again. 3 different Event logs r listed below.
No one seems to have the right answer to this problem. Ive read and tried them all and none solve it.
Ive tried deleting the certificates also. Newtwork List Service is Auto. Ive set my firewall to allow media centre extender. Ive been to Firewall Adv and checked all Media Centre Extenders manually. Ive tried the microsoft Moderators recommendations, all the services required are enabled. my router stats are updated and fine. I have xbox starting up with WMC and it tries to contact but cant. WMC IS the problem from what i can see. I had no problem connecting WMC to the old xbox 360 with ethernet so y a problem now? In WMC>Tasks>Settings>Extender i follow the screen and Set Up Extender. Ive even got to a stage where Xbox 360 icon is showing in WMC>Tasks>Extender with 5th 6th 7th digits shown but Stat... Read more

More replies
Answer Match 64.26%

Good day,

I currently have a pretty nice setup using my xbox360 as a media center extender -- I download movies to my computer in the office and through the home network I play them on my den's TV through the 360 (using the computer as the decoder).

Here is my issue: when I first got this computer about a year ago I made my 150G Raptor the C: drive and I put all my media files on my 1TB drive. Made perfect sense to have the fast HD for OS and applications and put media files on the large HD. Unfortunately when I did this, the Xbox could only look in the c:\users\mike\video folder to find my videos so all my movies on the 1TB D: drive were unaccessible.

Since that was an issue, I reinstalled Vista on the 1TB HD making that my C: drive and haven't had problems since. I'm about to do some computer maintenance anyway and would love to go back to my original set up with the Raptor holding my OS, does anybody know if MS has fixed this issue, or am I stuck searching for videos on the C:\users\mike\videos folder?

Thanks

A:Xbox 360 media extender looking for video files

Hi, on your original setup did you try relocating your user directory?

Right click on the Videos folder and click on the location tab this will allow you to redirect to the large drive.

on my own setup I have all my user folders on a separate partition and point the folders there so for example c:\users\username\downloads actually points to D:\downloads

vista uses a system of junction points for other system type directories which can all be relocated if required - the user folders are the only ones where it is a simple thing to do though

hope this helps

2 more replies
Answer Match 63.42%

I have an xbox 360 that I use as a media center extender and a vista laptop. I have tried using a straight ethernet cord (both normal and a crossover) and can connect fine but everything seems to time out after a a few minutes of recorded high definition shows being streamed. I get a screen saying how there is no signal, etc. (The show is actually recorded fine. I know this because I can finish out the rest of the show just on my laptop). I have also tried hooking everything up using a normal ethernet cable going to a hub, and another ethernet going to the 360. I have internet connection sharing so I can download demos, get on live, etc, through this setup but again when i go into media center sharing everything seems to slow down. Right now I couldnt even begin to watch a show..after a few moments on it it just wouldn't respond. How do I fix this? I've read people suggesting to turn the network card onto half-duplex mode but I'm unaware how to do this. Do I simply need to purchase a router or is there any other option for fixing this?
 

More replies
Answer Match 63.42%

Hello,

I have a laptop with Windows Vista Home Premium on it. I also have an xbox with Windows Media Centre. I have movies that I ripped from dvds that I own on the laptop that I am trying to play through Windows Media Centre on Xbox with the extender Now I have my folders shared and I can access it through dashboard and then video library. I wanted to be able to use the windows media centre program on the xbox but I am unable to do so.

Help is much appreciated.
 

A:Xbox Live - Windows Media Centre Extender

8 more replies
Answer Match 63.42%

hi there....i am trying to connect my xbox 360 as an extender. i get all the way through the setup and it fails at the last step. i have gone into my firewall and the media extender is ticked to allow. i have also manually set up rules to allow all the ports i found on the microsoft site to be allowed. lastly, i tried the microsoft fix it tool on the microsoft support site. i have run out of ideas. the xbox is definitely on the same network as me, it can see my laptop and also my iomega iconnect when i go into setting and network connections. it tests positively when i test the network connection, but fails when i test the media centre connection.

i have gone through the setup 3 times now (i.e. reset the connection and put in another 8 digit code to set up) but still no luck.

hopefully someone else knows how to fix this? maybe im doing something small wrong and keep overlooking it?

thanks heaps, beck.

A:Cannot connect to Media Center Extender on Xbox 360 (windows 7)

I am having the same problems. None of the solutions I have found anywhere have worked. I can setup the extender on a laptop running Vista using the same router and wireless network. It worked first try. I still cannot setup the extender on desktop running Windows 7 64 bit. Have been able to setup desktop computer and Xbox 360 to work together using PLAYON, so I know they have to see each other on the network. This is very frustrating. It seems like it should be so easy but it is not. Have been trying for several weeks.

1 more replies
Answer Match 63.42%

I'm seriously very frustrated with this issue I'm having at the moment.

All I wanted to do was stream an .mkv file to my tv from my computer... Which I managed to do successfully. I installed the "Windows Media Center Extender" and all of that stuff to get it working with my Xbox 360... Which all worked out fine.

Ever since then, however, I have been getting told by my computer that "You don't have correct permissions to access the file location" for every file in my "Pictures" folder in "My Documents".

I am the only user on this PC, and I am the administrator as well. When I click on "properties" on any file in my "Pictures" folder, and then "Security", the only two "Group or User Names" are "Account Unknown S-1-5-21" and "WMPNetworkSvc". I don't even see Administrator!

Why would media extender want to strip my entire PC of all user rights on the administrator account, and what can I do to completely reverse this mess? I've completely removed the "media extender" and even tried a system restore, all to no avail. This is so frustrating.

Can anyone tell me exactly how I can give the administrator account on my computer FULL access to EVERYTHING on the entire computer easily?

A:User permissions headaches after installing WMC Extender for Xbox 360

Hi Axmann,

Welcome to Vista Forums!

First, Vista is quite different from XP. You can't really give the Administrator Account access to EVERYTHING on the PC any more. Removing Extender won't help because the removal/uninstall process does not know how to restore the original permissions (as that information was not saved and thus the changes cannot be undone). System Restore doesn't work because it does not affect data files (intentionally). There's no way to return to the way things were at this point without doing so manually - and if you intend to use Media Center and the Extender properly, you probably do not want to make changes to those files (getting permission is one thing - actually using it to alter things is quite another).

Some folders are actually not real folders but junction points Svrops.com - Windows Vista Junction Points and shouldn't be touched by anyone but a true professional who knows exactly what he/she is doing - and over 99% of people don't fit that description (not even me). Some folders contain system files which even Administrators shouldn't touch without risking damage to the system (again, without the proper knowledge). This was done intentionally and the safeguards are pretty strong so only someone VERY familiar with permissions and ownership can override the restrictions (and sometimes only by making somewhat drastic and unsafe global changes).

In this case, the changes were made because controls for access to these files (and their l... Read more

1 more replies
Answer Match 62.16%

First off, I've spent a week searching for a solution to this so if I've missed something obvious I apologize.

My xbox has been connected as a media center extender to this computer and router combination for several months now. The router is a Buffalo WZR-HP-G300NH. Earlier this week the media center extender was having trouble playing back video. After a restart of the computer the extender was no longer connected.

When I try to add a new extender I get the message "Cannot add extender". Microsoft says to enable upnp and multicast. Check. Reflashed firmware to dd-wrt. No luck. Flash back to buffalo firmware. No luck. Try an old Linksys WRT54GL I have lying around. No Luck.

The event logger has this error: "Media Center Extender Setup failed as the Extender was detected on the network but the UPnP search for the Extender failed (timed out after 20000ms)." Event ID: 538

Now I've done everything I could find about enabling network discovery, allowing anything to access media and such. Network and sharing is set pretty much wide open. I've also tried switching between home and work networks.

With that said, I decided to check and see what updates have been installed. It turns out that an update was applied on the day I started having problems. It says it cannot be uninstalled. Description of the Windows 7 and Windows Server 2008 R2 installation software feature update

Note: I do not have system restore points. Small SSD and didn't take... Read more

A:UPnP Search Fails when adding Xbox 360 Media Center Extender

I've tried restarting the upnp, media center extender, and network list services. Also deleted the media center computer in the xbox 360. Still nothing.

3 more replies
Answer Match 62.16%

I've got Vista Premium Media Center connected to my XBOX. From the Media Center program library display on the PC, I can see and run all of the default installed programs and games (Adobe, Chess Titans, Freecell, Solaitaire, hearts, MCEbrowser, etc).

However on the XBOX the program library only shows two Icons that can be run (Adobe and MCEbrowser). Yet when editing the Settings under "Edit Program Library" on the Xbox I can see the entire list programs shown on the PC and they are all Enabled (ie, the check mark is on). But only two of the checked items actually show up in the Program Library display.

Anyone know how to correct this problem so I can run Chess and the other default games from the Xbox?

More replies
Answer Match 55.86%

Hi Im trying to install the XBCD driver for the xbox wireless controller. I have been following guides all of which tell me to enter test mode and download the driver then use a dseo to enable the driver (hope this is making sense). However when I go into device manager and try to update the driver the xbcd does not show up.
Can anyone help??

A:XBOX wireless controller configuration

Do you mean xbox or xbox 360 wireless controller? if you mean 360 why don;t you just use the microsoft provided drivers? If it's not automatically recognized by a game, use XPadder to set up custom control schemes for them.

3 more replies
Answer Match 54.18%

some files play fine on both (desktop dual 22"monitors, and sony hd720p projector, other files only on desktop, then on projector via extender (linksys dma2200) reads "cannot play video" possible codec or file corruption"
doesn't make sense to me any help?
got all the shark codec package with quicklite
associated all media files to default open with media center.
appreciate any help, driving me nuts

A:linksys extender for wvx64 files play on desktop but not extender (projector)

Originally Posted by jaywilliams


some files play fine on both (desktop dual 22"monitors, and sony hd720p projector, other files only on desktop, then on projector via extender (linksys dma2200) reads "cannot play video" possible codec or file corruption"
doesn't make sense to me any help?
got all the shark codec package with quicklite
associated all media files to default open with media center.
appreciate any help, driving me nuts



you may have the codecs on the desktop but not the extender, the extender is the device playing the files, not your desktop, all your desktop is doing is streaming it to the extender. to fix this, you will need to find software to decode the files and play them streamed on the fly, i used to use this software to play every type of file on my 360, before the update to play avi files came out, and it still works, give it time to decode the files first and you will be pleasantly surprised.
http://tversity.com/

3 more replies
Answer Match 53.76%

I recently installed a Hawking N range extender on my network to support a Roku that my husband got for Christmas. The Roku works great now, but my laptop sometimes connects to the main network (the way I always connected before the range extender) and sometimes to the range extender (which has the same network settings as the main router). Now I can only connect to the range extender. I have not changed any of the settings. The network pass key is the same for both. Why can't I connect directly to my original network. Both the range extender and the network name are listed in network connections.
 

A:Solved: Installed a range extender, now can only connect to the extender

9 more replies
Answer Match 50.4%

I get an extender player error everytime I start up my pc. How do i get rid of it.
 

A:extender player error

follow advice here and post the logs those programs make
 

1 more replies
Answer Match 50.4%

Hi- my computer is locking up after I get the extender fatal error which says i need to reinstall extender player. A program called slow pc fighter pops up which i can't close. Weatherbug has been a problem too. I can't run malwarebytes. Please help me solve this problem. Thank you

A:extender fatal error

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. Click the Watch This Topic button at the top on the right.

Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.

Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

6 more replies
Answer Match 50.4%

Everytime that I boot my machine (Dell Inspiron 1525) I get a pop-up that says Extender Fatal Error. Please help me get rid of this error and restore my machine to sanity.

Thank you.

A:Extender Fatal Error

Apparently Extender is a player of some kind and yours is trying to load drivers at boot and it is defective.

I'd suggest re-installing it.

Then, if you don't want it, use Revo uninstaller to remove it.

2 more replies
Answer Match 49.14%

I use my WMC, to watch videos on my xbox360. Recently when I tryed to reconfigure my Extender on my pc, I get the following error, after I enter the 8 digit number:

Configuration Error:

An error was encountered while configuring your computer for use with this Extender

I am on a wired connection, Windows 7, with no Firewall present. I recently checked my event viewer, this is the error I received:

Event 7000, Service Control Manager

The Media Center Extender Service service failed to start due to the following error:
The service start failed since one or more services in the same process have an incompatible service SID type setting. A service with restricted service SID type can only coexist in the same process with other services with a restricted SID type. If the service SID type for this service was just configured, the hosting process must be restarted in order to start this service.

A:Windows Media Center Extender Error

Hi -

SID = Security Identifier

Please see of either of these help -

http://forum.xbmc.org/showthread.php?t=51943
http://www.sevenforums.com/media-cen...box-360-a.html

Regards. . .

jcgriff2

`

1 more replies
Answer Match 43.68%

The rest fo the error message says- "Failed to read configuration file. Please contact system administrator"
I have just R and R'd Firefox and I'm still getting this error message. It won't run now and now I see just how horrible IE is in XP,since I'm forced to use it now....sob
Please Help!!

A:Firefox won't startup-Error message says "Configuration error"

Only an idea!!!!  Not sure but it may be the newer FF may not run well on XP, you could experiment by down loading and older version.
 
Just checked I may be right check the link below!
 
https://support.mozilla.org/en-US/kb/firefox-no-longer-works-some-versions-windows-xp

7 more replies
Answer Match 42.42%

Wow !
I,m a new member. Guy forum was recommended by a friend. I just read the last post, Great reply. I'm kind of new on pc's. I've learned a little by myself. the problem I have is when I turn on my pc, I get "Extender Fatal Error" invalid or missing resource files in the installation directory. Reinstall Extended Player. My friend told me that this had something to do with a piggyback, from a game or game site and to get with you guy's to remove it. So here I am.
 

A:"Extender Fatal Error"

EXETender is software used with online games from a site named FreeRide Games. Do you play their games? If not, here are instructions for removing the software: http://support.freeridegames.com/questions.php?questionid=77

If this doesn't work, let us know. We can remove the startup for it next:

Press the Windows key + R to open a Run box.
Type in msconfig
Select the Startup tab.
Uncheck the following entry and Exentender won't pop up anymore:
O4 - HKCU\..\Run: [Exetender] "C:\Program Files\Free Ride Games\GPlayer.exe" /runonstartup
 

2 more replies
Answer Match 42.42%

I am in dyer need of some help. I just had a Verizon technician come in and fix my DSL since it was out. The modem was bad which was a Westell 6100, and was replaced with a Westell A90 750015-07. Now before all I did was plug in my eternet chord, to the xbox and there I was online. Now I did that and receive this NAT Error. I have done just about every tutorial on google, with no avail. And have also called Verizon and flipped out on them. They give me new hardware with a configuration that is not allowing me to access the internet.

So far what I have discovered is that I have to open ports. Please if someone posts portfowarding.com that was no help. I opened 5 ports, and still nothing. I kind of need a detailed explanation.
What I've done so far:
- Go to 198.168.1.1 ; Login ; Enable UPnP ; Tried setting DMZ Host to Enable ; Foward Ports Manually (53,80,88,1863,3074) ; Choose Xbox Live option from Port Fowarding Menu which only has two ports opened 53/3074) ; Reset Modem.

Still nothing. Please help I'm very frustrated. Verizon wants me to sign up for a package of $15 per/month for 10 months, and if I decide to cancel its $60 or a one time fee of $40. I am not doing either one. Thanks anyone that takes the time to read my problem, and attemp to help me.
 

A:NAT Error XBOX 360 Nothing Works

7 more replies
Answer Match 42.42%

I got the 2 red light overheating error on my xbox, about 2 minutes after i start it up. i read some stuff online saying its a good idea to replace the thermo protection on the 2 chips, i did that and it still comes up flashing those 2 red lights. is there anything else to try?? i was able to play an entire game of madden yesterday with the entire plastic casing off, the fan was pretty loud though

any ideas? i dont want to spend money on the repair guides that come up all over the search engines when I look for tips. thanks
 

A:2 red light xbox error

12 more replies
Answer Match 42.42%

Hi there

when i go to

media,music, music source, computer it comes up with this

Network Adapter Wired
Ip address Confirmed
Pc Selected Failed

How can i fix this
thanks

p.s sorry if in wrong place its computer xp related kind off
 

More replies
Answer Match 42.42%

Yesterday at the Game Developers Conference, Microsoft held a keynote that included a number of details on how the company will improve the gaming experience in Windows 10.

Read more
 

A:Windows 10 gets Xbox Live SDK, Xbox One wireless controller, accessories

I though you could connect and use the Xbone controller through it's usb cable?
 

6 more replies
Answer Match 42.42%

Hey I am having problems connecting to Xbox live because it has no internet access and I have tried lots of protocols and nothing is working. I need help! I am not a computer savvy person but I think I have done enough resetting and going through countless forums. Okay here is the deal I am upstairs and my wireless connection is downstairs with 4 out of 5 bars of reception. I connect the Xbox to my laptop and it has no internet access for some reason. Mind it was working not that long ago with te same connection then one day it just decided to give out. Here is my list from ipconfig/all in the CMD prompt. If someone could help it would be much appreciated.

C:\Users\User>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Corey
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR9285 Wireless Network Adapter
Physical Address. . . . . . . . . : 00-26-5E-F6-32-B8
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d0c5:643d:f28d:fad9%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.10.4(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . .... Read more

A:Network Sharing hardwired from computer to Xbox. Xbox NoInternetAcess

According to this, your Xbox is not connected to the LAN.

3 more replies
Answer Match 42.42%

I have a USB 2.5 external HDD that I want to use with my Xbox 360 to play original Xbox games.

An emulator is required to play original Xbox games and the 360 will download this etc. for you with an Xbox 360 that has an internal HDD.
Mine is only a 4GB internal HDD so will not perform this function!

Can anyone help me make the external USB HDD perform this function???

Thanks
 

A:Making an External HDD backwards compatible for Xbox games on an XBox 360

360 isn't backwards compatible with Xbox games. Since you have digital copies of the game, we can't be sure you actually own a legit copy. So, we can't help you sorry.

But, you can use this to format external drive for your 360.
http://www.wikihow.com/Format-a-Hard-Drive-for-Use-With-Xbox-360
 

1 more replies
Answer Match 42.42%

So all awesome games of windows store have xbox one requirement, can i play it without xbox?

A:Can i play Xbox one labeled games on windows store without xbox?

Where does it say XBOX ONE is actually required to play the game? I see games with XBOX branding but no mention of actually having to have an XBOX to play them? I own an XBOX ONE, it has its own APP/Game store separate from the Store you see on a PC. If the App or Game installs it should be playable? Try one of the free ones first.

1 more replies
Answer Match 42%

hard drive is shot, can't save anything, it was a gift to my son, should I go through MS's hoops and wait the 6 to 9 weeks, or just buy a new hd?

Will say this, smooth graphics.
 

A:Solved: error code E 68 on xbox 360

Since I don't own an xbox360, and have never worked on one, my opinion doesn't hold much weight, but I'd have to say it's more of a personal choice.

If the unit is under warranty, then I would send it in (personally I wouldn't mind the wait, but then I don't have an upset son that I'm trying to please).

If it's out of warranty and you are positive that the problem is the hdd, then from what I've read it's not too hard to put a new drive in.
 

2 more replies
Answer Match 42%

hey i recently fixed a xbox with rrod. it has a hitachi drive but dono if it originaly had a samsung or toshiba.. the drive plays dvds but when i put a 360 game in it (gta4) it comes up with white screen and says.. please put game in a xbox360 drive. ive tryed some other samsung/toshiba drives but same thing. i had the hitachi drive running in another xbox but that xbox stuffed up so put it in this other one. what should i try. i might just buy a brand new samsung/toshiba drive if i know its compatible...
 

More replies
Answer Match 42%

I have seen various fixes for this across the net, I do not want to trap the fans with a paper clip this sounds like a tempoary fix and certainly not common practise by somebody who wants to fix something properly, which other methods are there to repair this error and does anyone have a link to a good tutorial for doing so?

at the moment I understand this error appears from overheating, what I do not understand is how to clear the fault.

If I remove the heatsink and place some thermal paste / clear out the insides and power up again, will this error will still exist?

thanks in advance.

Zorg.
 

A:Solved: Xbox 360 - Error E74 1 Red Light

11 more replies
Answer Match 42%

Hi everyone, I've recently gotten BSODs when playing Steam games using my controller, (that sometimes disconnects/reconnects itself very quiclky while i'm playing) so i've wondered if you could help ^^"
My debug file should come up with this thread if i did not mess it up, thanks in advance!

A:BSOD error using a Xbox controller

Hi Hurlu.

Uninstall the XBox 360 wireless controller. Download a fresh copy from Software Downloads: Xbox 360 Wireless Controller for Windows and install it.

Let us know the situation after doing it.
_____________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 10D, {5, 0, 1024, fffffa8005c09010}

*** WARNING: Unable to verify timestamp for xusb21.sys
*** ERROR: Module load completed but symbols could not be loaded for xusb21.sys
Probably caused by : xusb21.sys ( xusb21+2888 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WDF_VIOLATION (10d)
The Kernel-Mode Driver Framework was notified that Windows detected an error
in a ... Read more

3 more replies
Answer Match 42%

Im Using A Dell Latitude D620 Laptop, And A Clear Mobile Broadband
And Im Trying To Hard To Connect The Internet To My Xbox!
I Do That Whole Bridge Connection Between My Laptop And Xbox,
I set the IP Adress, and Still i Cant!
And I Did Everything People Told Me To Do, But I Seem To Be Doing Something Wrong Please Help?
 

More replies
Answer Match 42%

Modified Xbox Consoles Banned From Xbox Live
(November 11 & 12, 2009)

In an attempt to combat piracy, Microsoft is permanently banning modified Xbox consoles from accessing Xbox Live. The ban also applies to gamers who have played games downloaded in violation of copyright laws. The ban will affect between 600,000 and one million players.

Users can recover their online profiles if they purchase another console. The plan raises concerns because it is the console rather than the player that is banned, so the people who purchase the devices second hand could find themselves unable to access Xbox live.

Microsoft bans up to 1 million Xbox Live users - Games - msnbc.com
BBC NEWS | Technology | Xbox console ban is 'permanent'

A:Modified Xbox Consoles Banned From Xbox Live

I saw this earlier today and frankly I think this is an excellent call on the part of MS.

3 more replies
Answer Match 42%

I was wondering if you can play regular xbox games on an xbox 360 with xbox live.
 

A:Solved: can you play xbox games on an xbox 360, live?

of course you can, but, not all game are compatible witht eh xbox 306, and you can play LIVE, those that have LIVE(duuh!)
here's a link with a list of xbox games compatible with the 360

http://www.xbox.com/en-US/games/backwardcompatibilitygameslist.htm
 

1 more replies
Answer Match 42%

I have my old ZD8000 on A/C power attached to my tv using the tv as monitor.  Below my tv is my XBox 360.  When I use the XBox (also connected to the tv),  it is usually at night.  I use the XBox's white remote to turn it on and off.  The laptop is off.  When I turn the XBox 360 off with the remote, the ZD8000 laptop turns on.  Anyone know what I can do to stop this behavior and can anyone explain why this happens since I would love to understand why?

More replies
Answer Match 42%

hello, i hope someone can help me as i have spent countless hours browsing the web and different forums for an answer, so i am finally posting somewhere hoping someone can help me directly.

i have a laptop connected to my neighbors xfinity wifi hotspot, using my uncles login information. i have a steady 4 bar connection and am able to access the internet, the connection is not the problem. i have an ethernet cable connecting my xbox and laptop and i am using Internet Connection Sharing to get access to xbox live, this works however i am losing connection ALOT and it is very frustrating trying to play multiplayer with my friends. i am guessing that ICS is not as reliable as Bridging the two connections.

i can successfully create the bridge and can still access the internet on the laptop, but cannot connect to xbox live. while running the test to connect i can get it to connect to the network by entering the information manualy, but then it fails to connect to the internet due to 'the dns servers cannot resolve xbox live server names'

please help and i will be happy to provide more information if needed.

A:Need help bridging xbox 360 to laptop for xbox live connection.

Try this link out, it show both ways of Connecting....

Connect to Xbox Live by using a a Windows Computer
P.S. Does you neighbor know you're using the Hotspot?

2 more replies
Answer Match 42%

Ok. When I use my Xbox controller (plugged in and wireless) It works perfectly. When I plug my Turtle Beach Headset into the controller using the adapter that came with them, they work perfectly... until I launch the XBOX app to stream. All the sound comes through the controller (eg chrome;YouTube, Spotify, VLC,Skype etc) except for the Xbox stream to my computer, which has no sound. I have re-installed all the relevant drivers but to no avail. Can someone help me please, as I do like to play my XBOX through my Laptop and chat to people on XBOX Live.

More replies
Answer Match 41.58%

When I try to run SPSS which I recently installed it receive an error message stating that the application can't run because of a configuration error. Can any one help with this? My professor was telling me what that meant and honestly really freaked me out.

A:Configuration Error

It simply means that it didn't install properly/completely...for whatever reason. It's not set up properly for use.Program settings are configured (usually) after install...or using the default settings.Google LinksLouis

1 more replies
Answer Match 41.58%

Hi

I just re-installed windows XP pro on my dell pc,and when i come to switch on the machine ,i get a message before startup saying invalid configuration information.
I have to wait and then it starts up. It has also reset the time and date.

The battery inside was fine before i wiped it-could it be the BIOS ?

Any help would be very welcome
Thank You
 

More replies
Answer Match 41.58%

using windows xp on my presario sr1103wm i ran the recovery in the pc repair program and after it restarted all i get is this error message has detected a configuration error (code purple) and the computer is non-responsive help
 

More replies
Answer Match 41.58%

I have an HP pavilion A6303w,every I tried to booted it.It always come with a message stated configuration error code purple...It's a windows vista desktop..I even try to change the windows vista to windows xp..As soon as I insert the cd in the drive,it started downloading just fine.As soon as it started to set up the windows it stop..And come back with that message configuration error..Please help thanks.
 

A:Configuration error.

I have never seen something give an error message "code purple". Maybe it is a BIOS error message? Do you see that "code purple" as you boot the machine or would Windows start running and give you that error ?
 

2 more replies
Answer Match 41.58%

Hello,

This is the first time here for me, have searched the forum and could not find an answer to solve my problem, maybe I have overlooked it.

Here is the problem, when I turn my computer on I get this error message.

CPU = Intel (R) Pentium (R) 4 CPU 2.00GHz
639K System Ram Passed
638M Extended RAM Passed
512k Cache SRAM Passed
System BIOS shadowed
Video BIOS shadowed
ATAPI CD-ROM: Sony DVD RW DRU-720A
ATAPI CD-ROM: HL-DT-STDVD-ROM GDR8160B
Mouse initialized
ERROR
0162: Configuration Error - Default configuration used

Press F1 for Setup
If someone could give me some guidance it would be greatly appreciated, the operating system is Windows XP Pro.

Thank you
wicewater
 

A:Configuration Error

7 more replies
Answer Match 41.58%

when i try to start a game it says it cannot
open the configuration
 

More replies
Answer Match 41.58%

Hi everyone,
i am currently having a problem with my network i have setup at the moment, the problem is, with my xbox or my router.
see, whenever i go into windows media player, play a song then click the play to icon, then the xbox 360 media center extender, the play to window will show up and say that it is connecting, i do this with my xbox turned on and ion media center mode. after a few seconds it says that it is not responding, and yes my xbox is setup with the computer i am doing it with.
any help would be appreciated
Thanks, Spudals

A:Xbox 360 and Windows 7 ultimate play to error

Where do you get the not responding dialog? On the xbox?

If so, you probably need to forward some ports.

Here's the list:

UDP 1900 Inbound

TCP 3390 Inbound

TCP/UDP 2177 In & Out

TCP 10244 In & Out

TCP 554 In & Out

UDP 5004 - 5005 In & Out

TCP 8554 - 8558 In & Out

UDP 50004 - 50013 In & Out

UDP 7777 - 7781 In & Out

Give permissions (internal firewall) to:

svchost.exe
system
ehshell.exe
mcrmgr.exe
mcx2prov.exe

How to forward ports: PortForward.com - Port Forwarding Guides Listed by Manufacturer and Model

4 more replies
Answer Match 41.58%

Been trying to download the halo3 heroic map pack.

Whenever I try it gets to 2% and then gives me an error

"The download could not be completed. Please try again later. ANy points you used have already been deducted from your balance and will not be deduced again

Status code: 800700d"

I called live techsupport and my issue got escalted to 3rd tier but have yet to hear from them. Was hoping someone has had the same issue and figured out a fix.

Thanks

Things already tried:
Try downloading another day (been trying for a week now)
Clear the HD cache (X,X,Left Bumper, Right Bumper, X,X) and try again
Recover your gamer tag and try again
I was also able to download something else from XBL w/o issue.
 

A:Solved: XBox LIve Error 800700d

It sounds trivial but try resetting your modem and router? I had a similar problem downloading Halo 2 maps, I think.. These problems seem to be fairly common with the Marketplace. Sorry I can't be of more help
 

3 more replies
Answer Match 41.58%

Hello. I want to ask about that.
When I sign-in to Xbox Live Apps, it says Error 0xc00d1353 (Your sign-in info is different to your Windows Region), but I'm sure that Windows region and Windows Live Account is set to United States (Although in real I'm living in Indonesia because Xbox Live doesn't support Indonesia region).
Please help. I want to connect My PC to Xbox Live App and Pinball FX2 game.
Thank You.

More replies
Answer Match 41.58%

my controller was working fine until 1 day when i plugged it in the windows didnt recognise it and a message appeared saying usb device not recognised and the error was code 43.i have lost 2 of my joysticks just like this.pleasss can anybody help????

A:my xbox 360 controller for windows has error code 43

noboby has the solution to this??? please some body help

9 more replies
Answer Match 41.16%

I got this error after I did a Compaq System Recovery.
Your system has detected a configuration error. Please report this error to Customer Care using the phone number found in the Warranty and Support Guide that came with your PC. Unless corrected, this error will prevent your PC from operating properly. Turn off your PC by pressing and holding the Power button. After a few seconds your PC will automatically turn off. (Code Purple)
Help!
 

More replies
Answer Match 41.16%

Friend has and HP a535w that is producing an error, machine boots up until the XP media center splash screen and then an error box appears:System Configuration ErrorThe system has detected a configuration error. Please report this error to customer care using the phone number found in the Warranty and support guide that came with your PC. Unless corrected this error will prevent your PC form operating properly.Turn off your PC by pressing and holding the power button. After a few seconds your PC will automatically turn off. (Code Purple).'i searched google and the only thing i could find http://www.resellerratings.com/forum/tech-...ode-purple.htmlwas that this had something to do with "tattooing" the recover to the motherboard, and a workaround was to attach the HDD to a usable system andopen up C:\hp\bin\ConfigCheck\cfgchk.bat with notepad and modify the section that checks to see if the hard drive is tattoo'd to have it not bother checking at all. (although the hard drive will be running as slave so replace the C:\ with whatever drive letter Windows assigns it) The line to remove is: "python c:\hp\bin\ConfigCheck\run.py". This worked great for me and I hope it helps anyone else who comes along this thread as an alternative to dealing with tattoo'ing the motherboard or hard drive. i did this and cannot find the .bat file, that path does not exist.this machine is out of warranty and we do not want... Read more

A:HP system configuration error

http://www.techimo.com/forum/applications-...ode-purple.htmla couple of pages into this thread seem to have several fixes.

4 more replies
Answer Match 41.16%

I have Windows Me and when i try to boot up i get this error.


Cannot find System.ini.

Boot with emergency boot disc and type scanreg/restore

WHAT Do i do?? I dont have the boot disc. I have another computer with xp and if i need to download a file i can. Any help?
 

A:Registry Configuration error

Take your system to someone who can test your hard drive and reload Windows Me for you
 

2 more replies
Answer Match 41.16%

Hey there,

I'm on windows XP

when it comes to installing many new applications (not pirated or anything) I get this error

"C:\filelocation\program.exe

This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem."

It has happened both for the new MSN (Im stuck using windows messenger) and Ableton Live 8.03

I've obviously tried reinstalling a whole bunch of times, but no luck. Is my only option here reformat, could it be something viral? Or something more simple (i hope!)

Cheers and thanks a lot
 

A:Application Configuration error (XP)

8 more replies
Answer Match 41.16%

i had the sbc yahoo utilities on my comp with the browser and chat and little things like that and then i uninstalled it and tried to reinstall it and now i get an error half way through saying can not configure to my comp??? howcan i fix this???
Thanks
 

More replies
Answer Match 41.16%

Recently I've been getting a popup message at boot: Error detected retrieving default

configuration DEFAULT.ALC. I close the window and everything seems to run fine.
Anyone know what that's about or how to fix it??

Machine: Esystems
OS: WindowsXP Home
RAM: 1.5GB
Drive: 120GB
 

More replies
Answer Match 41.16%

I have Windows Me and when i try to boot up i get this error.


Cannot find System.ini.

Boot with emergency boot disc and type scanreg/restore

WHAT Do i do?? I dont have the boot disc. I have another computer with xp and if i need to download a file i can. Any help?
Edit/Delete Message
 

A:Registry Configuration error

Yes this was copied from another thread. I posted it in the wrong place
 

2 more replies
Answer Match 41.16%

System details;
OS Windows 7HP 64bit
CPU AMD Phenom II Quad
Motherboard ASUS M4A79-T Deluxe 790FX
Memory 12BG Corsair XMS3
Video card Sapphire ATI Radeon HD 4890
Boot disk C:\ Samsung Spinpoint 1TB 7200 SATA II 32MB
Problem;
Tried to update Snagit 11 (build 207) to version 12.2.2 (build 2107) but when trying to install the update I get snagitup.exe-Configureation paser error, error parsing C:Windows|Microsoft.Net\Framework\v4.0.30319\config\machine.config Paser returned error 0xC00CE508
 
Would greatly appreciate any help 

A:Configuration Parser Error

Worth a look, Configuration Parser Error .
 
Louis

5 more replies
Answer Match 41.16%

I'm using Win 7 ultimate 32 bit. I've a problem when configure DNS. I enter Local Area Connection Properties then click on Internet Protocol Version 4 but it show a window and disappear.

It like this video:

Who can help me, please?

A:Error! can not set up TCP/IP configuration on Win 7 ultimate

Can you access it in safe mode?

9 more replies
Answer Match 41.16%

Hi there guys.

One of my applications, Microsoft Flight Simulator X was working normally for awhile until I encountered a problem where it says the application could not start because its side by side configuration is incorrect. I cleaned everything up by doing "sfc /scannow" in Command Prompt and it solved the problem.

However, when I tried to open up Microsoft Flight Simulator for the second time, the error occurred again. Can I please help some advice on how to stop this re-occurring problem?

Thanks,
Jozef

A:Sidebyside Configuration Error- NEED HELP!

Welcome
It will take a little while, but I will refer this to our forum specialist in this area.

9 more replies
Answer Match 41.16%

I'm having this issue

TCServer.ext - Configuration Error

Unable to load Jit Compiler (MSCORJIT.DLL)
File may be missing or corrupt
Please check your setup or rerun setup!

Basically when I did a google search I came up with this patch for what everyone says is a memory leak.

http://www.microsoft.com/downloads/d...displaylang=en

This didn't solve my issue.
The actual issue is that this error comes up as soon as I log into windows and either freezes me straight away or resterts.


- Version of the OS. XP Tablet Edition
- Security Patches - Unknown. I can't use the tablet long enough to check
- If the OS produces an error, either upload a screenshot of the error message (ALT+PrtScrn), or literally quote See above
- Were there recent crashes that could have caused this problem?Unknown
- Did you install new software recently? If this is the case: Which software? (Brand, version, build)Unknown
- Did you do any of the following:
- Run a scan with an updated anti-virus program?No, can't
- Run a scan with an updated anti-Trojan program?No, can't
- Run a scan with an updated root kit detection program? (This only for Windows NT, W2K and newer!)No, can't
- Run anti-spyware scans with at least two freshly updated anti-spyware programs? No, can't
If any of these program found something, provide us with the information on what it/they found. N/A

More replies
Answer Match 41.16%

ok heres the prob...
today my nephew was playing sims 2 and while he was playing he hit the shelf the tower was on..it fell less than 2 feet and not very hard since the cords slowed its fall...
now when i go to restart it i get this errors:

0162 configuration error
no dhcp or proxydhcp offers were recieved
1962 : no operating system found

im not sure what has happened or what I need to do now.
I was reading online and it said run setup but not sure what that meant.
 

A:0162 configuration error

Run setup probably means run Windows setup. But i think i may know what is wrong. Can you check the hard disk IDE cable, make sure both connections at either end of the cable are securely fixed into their sockets
 

2 more replies
Answer Match 41.16%

Immediately after upgrading to IE8, a Wireless Configuration error message began appearing and will not close even when I reboot my Acer Aspire 5600. It reads as follows:

Incorrect MFC Dll version installed on system, minimum requirement is MFC SP4 dll.

I located an answer from Dell for their computers in these Forums, but can't find anything here for Acer. Any help would be appreciated.

Laurie

A:Wireless Configuration Error

do you have a service running called Broadcom Wireless LAN Tray Service
control panel> admin tools> servive

3 more replies
Answer Match 41.16%

Hello there. I hope I have posted this message in the right area. This morning I fired up my pc to find an error greeting me. It was that windows was missing a configuration file. I rebooted a couple of times then it came back up.

Once it did tho, it went through reloading all my hardware. Everything was fine so I thought. I then realized there was no sound. Xp is showing the Realtek onboard sound card there, indicating under Audio Devices, Properties that "This device is working properly" and "Driver is enabled but has not been started". However, under the main Volume tab it shows "No Audio Device".

I have verified under Services that Windows Audio is started and running (set to 'Automatic'). I have attempted to remove and resintall the device, tried alternate drivers, all to no avail. Any suggestions or recommendations on how to proceed would be so greatly appreciated!
 

A:Configuration error...now no sound.

7 more replies
Answer Match 41.16%

I'm on ADSL Zoom X3 modem connected to my PC with No other Router connected

when I used a bittorrent for the 1st time (Azureus), I got NAT error problems, this happened to everything I tried.
It tells me I have no remote access & icons stay on yellow?
I checked all the wizard configurations & whatnot, they all told me I have a NAT error

I just want to know if theres anything I can do? because when I switched to my AOL 56k connection, the NAT error was not present there
SO is my NAT messed up or not set up correctly???

I don't have a router so I can't open any ports only on it,
I'm only with my DSL modem, so I went to my DSL setup page

I went to the NAT CONFIGURATION OPTIONS
the screen had this info:

NAT : Enable
Mode: Dynamic

Session: blank (no other options listed but can be typed on)
User IP: blank (no other options listed but can be typed on)
Action: add (& another option for delete)

Number | Session | Name | User IP
# of NAT configurations: 0
I tried switching to disable NAT!
the description makes it seem like hackers can get to my IP & whatnot without it, but I tried anyways, BUT I could not connect to the net anymore after that, I had to re-enable it.

All I know on on Azureus is that in options it states 6881 as the incoming TCP listing port.
there is no Session or User IP info there to find & typing 6881 on User IP just tells me it's an inncorrect IP
can anyone help?
anyone with any knowledge of this??
is it poss... Read more

A:can ANYONE help me with a NAT error/configuration problem??

the other options on my dsl setup page other then NAT are:

WAN settings
LAN settings
NAT
Virtual Server
DMZ
DNS
ADSL Configuration
Route Table
Misc Configurations
Bridge Filtering
RlP Configuration

are any of those helpful to open the 6881 port?
 

1 more replies
Answer Match 41.16%

I have tried everything but everytime I boot up my computer I get this hardware configuration error any suggestions on what I should or can do?
 

A:Hardware configuration error

What operating system do you use, and what is the brand and model, or configuration of your computer. What tasks are you running when you get the hardware configuration error... or does it even boot.
Tell us as much as you can, so we can imagine what you are up against.
 

3 more replies
Answer Match 41.16%

Hi, I am actually trying to configure a router, with a serial and fast ethernet interface..
now i have a network address of 192.168.50.1 and i have used 192.168.50.2 for the fast ethernet interface and 192.168.50.3 for the serial interface, but it giving me an error, saying its overlapping the fast ethernet address of 192.168.50.0, is there anything i'm doing wrong there? can anyone help me please...
 

A:Hi everyone i have router configuration error...

6 more replies
Answer Match 41.16%

Ok so I had been using the Xbox App for the last couple weeks with the only issue being that the party chat doesn't work. Yesterday I went on to play and connect to device, but my Xbox is not showing up to connect to. The strange thing is, my friend who rents out my downstairs has an Xbox and I can see that. I have not changed anything, any ideas how I can get the Xbox to show up? I have the streaming enabled on the Xbox(because I had been using it before and both my PC and Xbox are hard-wired to my router.

I have tried the following:

-Power cycled my Xbox

-Power cycled Router

-Reset my Router to default settings

-Restarted my PC

-uninstalled and then reinstalled the Xbox App on Win 10

-called Windows support for Xbox App and they had me clear some data on the Xbox

.......still nothing. What the heck is going on that is just stopped showing up?! seems like the Xbox has issues if that wont show up but my friends does... Thoughts?

More replies
Answer Match 41.16%

i tried to connect my xbox 360 to my laptop (windows XP) and next to the network a yellow triangle with a exclamation point popped up. Anyone know whats wrong?

A:My Xbox 360 will not conect to my laptop for xbox live

It would be better to connect the XBOX directly to the router (if possible)

Make sure that the laptop is connected to the wireless.

Go to Control Panel and open Network Connections.

Right-click on the wireless connection and choose properties.

Click the Advanced tab check the box to Allow other network users to connect

through this computer's internet connection

In the dropdown menu select Local Area Connection

1 more replies
Answer Match 41.16%

I just went out and bought the Godfather Limited Edition and SSX On Tour, both for the original Xbox. The only problem is that it says that there needs to be and update installed to play these games when I put in the disc. Both of these games in total cost me $40.00. I don't really want to go back to the store and return them because I want to find a way to play them. I also own a mac, so maybe I could install an emulator and play them on my computer. If anyone finds a link to an update to play these games for my 360 or finds an xbox mac emulator, PLZ LET ME KNOW!!!
 

A:Can't play some original Xbox games on my Xbox 360

6 more replies
Answer Match 41.16%

Hi, Just received a BSOD, I had Spotify open, and was running Xbox One streaming app streaming from the xbox one, other than that Im not exactly sure, Valve's Steam was also open...

More replies
Answer Match 41.16%

Is it normal for your XBOX ONE controller to lose its link to the XBOX if you plug it into a PC with a USB cable? I was using the XBOX App on my PC and had to connect my XBOX controller to my PC with a USB cable. When I was done it would not work with the XBOX. I had to relink it? Am I going to have to do that every time I swap it back and forth?

More replies
Answer Match 41.16%

I know many of you out there have probably encountered this scenario. I have an xbox 360 and I have a gateway from comcast called the TG862G made by Arris. A seemingly simple scenario that would suggest Changing the wireless security or changing the wireless channel or the wireless mode but NOTHING seems to help. So That is why I am posting here. Besides replacing this device is there ANYTHING out there that anyone has tried because I don't have time to be wasting on the phone with these people when no one knows what they are talking about.
By the way Thanks In advance and even if no one can figure it out just let me know because if its not gonna work then forget it.
 

A:TG862G - Xbox 360 - No answers at all (from xbox or comcast)

Would help if you can explain what is going on....

(EDIT: I work for a cable internet company that works with these modems so please be detailed on the issue)
 

1 more replies
Answer Match 41.16%

I have downloaded some basic games like Solitaire, Mah Jong, and Freecell. Every time I run them, the app tries to communicate with my Xbox. It just happens that I don't own an Xbox. Is there any way I can configure the games so they don't try this rather futile communication?

A:My games want to connect to Xbox, but I haven't got Xbox

Originally Posted by gfdbill


I have downloaded some basic games like Solitaire, Mah Jong, and Freecell. Every time I run them, the app tries to communicate with my Xbox. It just happens that I don't own an Xbox. Is there any way I can configure the games so they don't try this rather futile communication?



They are not trying to connect to YOUR Xbox but to Xbox online service to keep and retrieve game specific data.

All Xbox Games on Windows 8 and Windows RT will have Xbox achievements, and many will also take advantage of other Xbox features, including leaderboards, multiplayer modes, connecting with friends and more.

1 more replies
Answer Match 41.16%

Hello all! New member here with a new problem.

I bought a Xbox specifically just so I can play with my brother on different games via Xbox live. The first month was great, it worked well and we never got disconnected or lag. After that month... randomly Xbox live would disconnect out of the blue. After a week, it started were it disconnects every 15 minutes.

So after trying to fix it for 4 months, I still have had no luck. My router is a Linksys BEFW11S4 V4. I see no option to turn on UPNP. If anyone could please help me with this......... that would be awesome.

Thanks all!

-Live2bcool
EDIT: I forgot to say this also happens with Windows Live. Singing into that while my brother is on the Xbox still disconnects us.
 

A:Xbox Live disconnects with 2 xbox's signed in?

10 more replies
Answer Match 41.16%

The problem suddenly appears and my computer shuts down. I get angry. I see the blue screen display saying: The Windows Driver Framework has detected that a violation has occurred. What I do?

Well, my computer recently is with this problem. I don't know what I do. Please Help-me.

Sorry, if I write wrong. I don't speak English very well.

MY COMPUTER:
Intel Celeron 847 @1.10GHz 1.10GHz
4Gb ram
64 bits
500Gb HD
Windows 7 Ultimate

A:BSOD playing with my Xbox 360 Controller, error 0x00000010D

Hiya and welcome to SevenForums!
Please post in the BSOD section but this time it's ok.

Code:
BugCheck 10D, {5, 0, 1024, fffffa8005cdd640}

Probably caused by : Wdf01000.sys ( Wdf01000!imp_WdfSpinLockAcquire+47 )
Run sfc /scannow and chkdsk /r.
Install the latest updates from Windows Update.

Do the exact same steps for chkdsk /r but instead of typing in sfc /scannow type chkdsk /r.

Do you use Motioninjoy to emulate your Xbox 360 controller?

4 more replies
Answer Match 41.16%

Hello all,

Relatively new here, so bear with me please. Today I was going to move my gamer profile from my XBOX onto a USB, and after that, I tried loading it onto my computer, and it said:

"Windows has stopped this device because it has reported problems. (Code 43)"

Pretty sure it is a driver problem, but I've searched all over google for my same problem, and returned nothing.

Thanks in advance, Mav

A:USB Error Code 43 due to moving an XBOX gamer profile?

Bump

1 more replies
Answer Match 41.16%

I'm so tired of this error that I could I throw my computer down the window. So the thing is I'm trying to share my mobile connection from my computer to my xbox (which has worked before without any problems) but now when I click on properties on my mobile connection on the share tab to check the "allow sharing" box this error: 0x80004005 along with "undefined error" comes up.

Which seems unsolvable, think I've turned google inside out trying to find an solution. I've only found guys that got the exact same problem, but doesn't get any helping answers.

Sorry for my English, computer terms are a bit tricky to translate from Swedish.

P.S to avoid any unnecessary discussion about how I could want to share mobile connection to the xbox when it's only going to lag, it will not, it works like a dream when it chooses to work..

Best regards

A:Trying to share mobile connection to xbox, error 0x80004005

Check your connection box/modem, restart it, see if that works, if not, then check your xbox connection and your phone connection. If it still dosen't work, then i would consider asking a professional

1 more replies
Answer Match 40.74%

Hi i bought a COMPAQ pc, windows XP desktop in 2003 at a local Best Buy. I was creating a second user account for the system when it froze and shut down. Upon restart, the loading Windows XP black load screen that shows up right after power returns froze and a window came up saying system configuration error. I am currently 20 miles from my house ,and on a different computer obviously, but the i can remember that the error tells me that if problem is not fixed please call the number in my computer manual. I would LOVE to avoid waiting on the phone please help !~~!! please..My only solution i could think of was using the system restore disk but i do not even know if the boot up goes far enough for the PC to read the disk. Please help and thank you for your time.
 

A:System Configuration Error and no Boot up :(

Hi and welcome. See if you can start in safe mode. For a system this old, I doubt you'll get anywhere calling the number in the computer manual anyway.
 

1 more replies
Answer Match 40.74%

My Father-in-Law brought over the computer we gave him for Christmas and said it was not working. I started it up and got this message "your system has detected a configuration error. Please report this error to customer care...blah blah" I tried a system recovery but it had no effect. I tried clearing the cmos and that had no effect either. I tried using the recovery cd's that I made for it and got a message saying the cd's were not for the correct model?!?!?! What is going on here?

PC Info:
HP Pavilion a430n
XP sp1

Any help would be appreciated, Thanks in advance

-Nate
 

A:Solved: Help with System Configuration Error

12 more replies
Answer Match 40.74%

I keep getting this error message at start up. It gives me the option of F1 to resume or F2 to enter set up. When I hit F1 it starts fine enough but I'm concerned about this. Follows is a start up list report and then a hijack this log.

start up list log

StartupList report, 4/15/2006, 8:49:48 PM
StartupList version: 1.52
Started from : C:\Program Files\StartUpList\StartupList.EXE
Detected: Windows XP SP2 (WinNT 5.01.2600)
Detected: Internet Explorer v6.00 SP2 (6.00.2900.2180)
* Using default options
==================================================

Running processes:

C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\GWHotKey.exe
C:\Program Files\MusicMatch\MusicMatch Jukebox\mmtask.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\Program Files\Logitech\MouseWare\system\em_exec.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\WINDOWS\system32\ctfmon.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\PROGRA~1\Symantec\NORTON~1\GHOSTS~2.EXE
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
C:\WINDOWS\system32\utilman.exe
C:\Program Files\StartUpList\Startu... Read more

More replies
Answer Match 40.74%

Hello! I installed HP BCU because i want to do stuff with my computer. You know... Anyways, every time i start it, it stays open for like half a second then closes. I recorded it, and at the end it shows the message: "<Warning> msg="BCU return value" real="17" translated="17" />" That is what it says right before it closes. Please help me. Thank you for your time, and have a great day!

More replies
Answer Match 40.74%

I recently tried to turn on my pc and the boot manager screen is up and no matter what i do for several days now i cant get past this screen someone please help ive tried everything

A:Boot Configuration Error 0xc000000d

See Troubleshooting Windows 7 Failure to Boot

3 more replies
Answer Match 40.74%

I recently booted up my Gateway notebook only to find the "blue screen of death"

I rebooted and it came up to a windows boot manager screen which says windows failed to start..insert installation disc and click repair to fix...blah blah...i'm sure you know the story...

My question is, I booted the Vista disc and when I click repair it doesn't even find the C: drive...when I try and run the BCD fix from the command prompt screen, it says it found 0 Windows installations...would this indicate a faulty hard drive?? If so, I dont mind replacing the drive, I just wanna make sure this is the issue before I spend the money to replace it...

Much thanks for any help anyone can offer!

A:Boot Configuration Data Error

I'm not sure what BCD fix you tried, but see if it is this one and if not, try this one.

To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps: (you need a Vista Installation Disk to do this)

1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
2. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
4. Click Repair your computer.
5. Click the operating system that you want to repair, and then click Next.
6. In the System Recovery Options dialog box, click Command Prompt.
7. Type Bootrec.exe, and then press ENTER.

Note If rebuilding the BCD does not resolve the startup issue, you can export and delete the BCD, and then run this option again. By doing this, you make sure that the BCD is completely rebuilt. To do this, type the following commands at the Windows RE command prompt:
 bcdedit /export C:\BCD_Backup
 c:
 cd boot
 attrib bcd -s -h -r
 ren c:\boot\bcd bcd.old
bootrec /RebuildBcd

See if that works.

If you don't have the disk (or that didn't work), try EasyBCD http://neosmart.net/dl.php?id=1 and see if that helps resolve the problem.

If that doesn't work, you probably have some type of hardware problem - but it's hard to tell. It may be as simple as the hard drive cable got disconnected a... Read more

3 more replies
Answer Match 40.74%

Hi everyone. I am getting a Configuration Error on some sites. What does this mean?

Here's the text of the error:

Server Error in '/' Application.
--------------------------------------------------------------------------------

Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.

Parser Error Message: Failed to decrypt using provider 'RsaProtectedConfigurationProvider'. Error message from the provider: The RSA key container could not be opened.

Source Error:
Line 12: </configSections>
Line 13: <connectionStrings configProtectionProvider="RsaProtectedConfigurationProvider">
Line 14: <EncryptedData Type="http://www.w3.org/2001/04/xmlenc#Element"
Line 15: xmlns="http://www.w3.org/2001/04/xmlenc#">
Line 16: <EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#tripledes-cbc" />
Source File: C:\www.songtouch.com\web.config Line: 14
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
 

A:Configuration Error While Visiting Certain Sites?

*bump*
 

1 more replies
Answer Match 40.74%

The last time i played sims 3 was last night. I fell asleep with it on and when i realized what happened i tried to save it and shut down. No actions could be done it was froze, so i restarted and tried to play again and got error

Error Parsing
C:\Windows\Microsoft.NET\Framework\v2.0.50727\config\machine.config

Parser returned error 0xc00ce556.

I dont know ANYTHING about computers please help!!!
 

More replies
Answer Match 40.74%

I am running windows XP on a laptop but it stops loading when it gets to the microsoft logo (HDD stops working rather than computer hanging - scrolling bar still scrolling but HDD light stops)

I have started up in safe mode and it says that there is a problem with the configuration of the network hardware. I have tried restoring the computer to a previous setting but this stops working when it restarts at the same period it stopped working before

Please can you provide indepth info as my computer is running in Spanish (long story) and i dont speak a whole lot of spanish!
 

A:Network Hardware configuration error

Delete the network hardware from device manager while in safe mode and reboot.
 

2 more replies