Tech Problem Aggregator

Sidebyside Configuration Error- NEED HELP!

Q: Sidebyside Configuration Error- NEED HELP!

Hi there guys.

One of my applications, Microsoft Flight Simulator X was working normally for awhile until I encountered a problem where it says the application could not start because its side by side configuration is incorrect. I cleaned everything up by doing "sfc /scannow" in Command Prompt and it solved the problem.

However, when I tried to open up Microsoft Flight Simulator for the second time, the error occurred again. Can I please help some advice on how to stop this re-occurring problem?

Thanks,
Jozef

A: Sidebyside Configuration Error- NEED HELP!

Welcome
It will take a little while, but I will refer this to our forum specialist in this area.

9 more replies
Answer Match 72.66%

Yesterday I received the Sidebyside Config error when launching ESET NOD32. Reinstalled the program (per ESET's advice), but to no avail. Uninstalled NOD32 and installed Security Essentials. No problem. Just went to launch Quicken and got the SidebySide Configuration error message again. After yesterday's venture I came to find that these problems are so involved that a complete Vista reinstall may be the only hope. Before doing that, a couple of things:
1. Is this a system problem that will soon affect every .exe?
2. Is there a fix, because I have read attempts that all have proven futile?
I will try anything to try and fix it because I would prefer to keep Quicken on my system and I am skeptical that a reinstall will work.
Any advice is greatly appreciated.

-Mark

A:SidebySide Configuration (again)

First try a sfc scan

System Files - SFC Command

Tutorial thanks to Brink

2 more replies
Answer Match 58.38%

I have windows 7 64 bit and in Event Viewer, I have lots of error messages with SideBySide.

Here's what the error message says:

Activation context generation failed for "C:\Windows\WinSxS\amd64_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.762_none_c46a533c8a667ee7\MFC80U.DLL". Dependent Assembly Microsoft.VC80.MFCLOC,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0" could not be found. Please use sxstrace.exe for detailed diagnosis.

Screenshot of event viewer:

Anyone know how to fix?

A:SideBySide error

Download and install Microsoft Visual C++ 2005 Redistributable Package (x64).

(64bit) Download details: Microsoft Visual C++ 2005 Redistributable Package (x64)

2 more replies
Answer Match 58.38%

I keep getting the following error in event log "sidebyside 33" and the details are:

Activation context generation failed for "C:\Program Files (x86)\Verizon Wireless\VZAccess Manager\ATTExtension.DLL". Dependent Assembly Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",versio n="8.0.50727.762" could not be found. Please use sxstrace.exe for detailed diagnosis. I am using a Verizon USB modem to access the internet and the software to run the modem is vz access manager. Also when I connect to the internet I get a box that pops up telling me that "windows has detected an ip address conflict". I have disabled the realtech Ethernet connection so I can not imagine what the conflict is. I have contacted Lenovo and they want $129 to do a clean up of my hard drive but my computer is only one month old. I have also contacted Verizon but they have been no help either.

A:sidebyside 33 error

Welcome to the Seven Forums.

1) Make sure that you have the latest version of vzaccess installed:
VZAccess Manager
If you already have the latest version installed, the move to step 2.

2) Check your list of installed programs for
Microsoft Visual C++ 2005 SP1 Redistributable Package
If it is not there - install it from here
Download: Visual C++ 2005 SP1 Redistributable Package (x64) - Microsoft Download Center - Download Details
If it is there and the errors persist - re-install both vzaccess and the C++ software
For others that might find this thread and have a 32bit OS:
Download: Visual C++ 2005 SP1 Redistributable Package (x86) - Microsoft Download Center - Download Details
Some reading on the topic:

joystick junkie: Troubleshooting WinSXS (Side-by-Side) problems

WinSxS Folder in Windows 7 explained | WinVistaClub

7 more replies
Answer Match 58.38%

Hi, I've downloaded Oddboxx, a collaboration of 4 games by Oddworld Inhabitants, 3 games work perfectly, and one of the games gives me a SideBySide error upon starting it's Launcher.exe up. This occurs before patching, and still even after patching the game.

Here is Administration Tools Event Viewer's description of the error:

Activation context generation failed for "C:\Program Files\Oddworld Inhabitants\Oddworld The Oddboxx\oddworld strangers wrath\Launcher.exe". Dependent Assembly Microsoft.VC90.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="9.0.21022.8" could not be found. Please use sxstrace.exe for detailed diagnosis.

I am using Windows 7 Ultimate Edition x86.

A:SideBySide Error - Please Help

Hello Xan713!

? Please Download and install the following VC++ Redistributables in the following order: 2005; 2005 SP1; 2008; 2008 SP1, 2010

Web addresses:
1. Download details: Microsoft Visual C++ 2005 Redistributable Package (x86)
2. Download details: Microsoft Visual C++ 2005 SP1 Redistributable Package (x86)
3. Download details: Microsoft Visual C++ 2008 Redistributable Package (x86)
4. Download details: Microsoft Visual C++ 2008 SP1 Redistributable Package (x86)
5: Download details: Microsoft Visual C++ 2010 Redistributable Package (x86)

Thanks!

Richard

P.S. And then retry your program...

6 more replies
Answer Match 58.38%

Hey I am having issues downloading a game of mine, Fallout 3, on to my computer. Every time I tell the computer to run the disk it says there is a sidebyside error within the configuration. It tells me to go into the application event log and when I checked it I couldn't make sense of it at all. How do I fix my problem? Help?

A:Sidebyside error

Welcome
Your side by side error can be corrected by following this post.. Give particular attention to Niemiro.
side by side configuration
In order to obtain the best help available, Niemiro will probably be available in about 8 hours.

1 more replies
Answer Match 58.38%

I just started having trouble today with my computer freezing up. I looked at the Event Viewer and found a ton of these SideBySide errors, listed as Event 59 & 32. How can I fix this? Here are some details from the Events:

Error 59(s):

Resolve Partial Assembly failed for Microsoft.VC80.MFCLOC. Reference error message: The referenced assembly is not installed on your system.

--

Generate Activation Context failed for C:\WINDOWS\WinSxS\x86_Microsoft.VC80.MFC_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_3bf8fa05\MFC80U.DLL. Reference error message: The operation completed successfully.

Error 32(s):

Dependent Assembly Microsoft.VC80.MFCLOC could not be found and Last Error was The referenced assembly is not installed on your system.
 

A:SideBySide Error

For both Event Errors #32 and #59:

CAUSE
This problem occurs because the run-time libraries are not installed on the Microsoft Dynamics CRM server. The applications that use side-by-side libraries cannot run without the run-time libraries.

RESOLUTION
To resolve this problem, use the Microsoft Visual C++ 2005 Redistributable Package to install the runtime libraries. For more information about the Microsoft Visual C++ 2005 Redistributable Package, visit the following Microsoft Web site:
http://www.microsoft.com/downloads/...EE-A3F9-4C13-9C99-220B62A191EE&displaylang=en

FYI, in the future, to post an Event Error:
Right click on the Error> Properties> Click on the Copy button, top right, below down arrow and Paste here (Ctrl V)
 

3 more replies
Answer Match 58.38%

In the Event Viewer a SideBySide error ID 33 keeps popping up. Literally 441 times in the last hour. I'm beginning to think that this is the culprit for my computers slowness at times.


Code:
Activation context generation failed for "C:\Windows\System32\bcmwltry.exe". Dependent Assembly Microsoft.VC80.MFC,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762" could not be found. Please use sxstrace.exe for detailed diagnosis.
Any ideas on how to fix this without reinstalling Windows 7?

A:SideBySide Error.

Hi -

Please see - http://social.answers.microsoft.com/...5-008b2e4e97f0

Regards. . .

jcgriff2

`

3 more replies
Answer Match 57.54%

I get "Aw, Snap! Something went wrong while displaying this webpage. Closing the app and tabs that don't need may help by making more memory available." I only have 1 tab open. I have closed and re-opened Chrome, but this didn't help. I have tried cleaning cookies and catch didn't help. Rebooting computer didn't give any result ether. I can't go into setting or extension to change anything. I get "Aw, Snap!" error there as well. Here is the error I am getting in Event Viewer:

Log Name: Application
Source: SideBySide
Date: 8/16/2015 11:59:31 AM
Event ID: 33
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Larisa-PC
Description:
Activation context generation failed for "C:\Users\<User Name>\AppData\Local\Google\Chrome SxS\Application\chrome.exe". Dependent Assembly 46.0.2483.0,language="&#x2a;",type="win32",version="46.0.2483.0" could not be found. Please use sxstrace.exe for detailed diagnosis.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SideBySide" />
<EventID Qualifiers="49409">33</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-08-16T18:59:31.000000000Z" />
<EventRecordID>1920</EventRecordID>
<Channel>Applicat... Read more

A:SidebySide error in the Event Log

It is now third day and my issue is not getting any attention. Can someone please help me.
 

9 more replies
Answer Match 57.54%

Hey guys, every time i try and run ither Crysis64.exe or any other main .exe file in the crytek folder it always comes up with this error

C:\Program files(X86)\Electronic Arts\Crytek\Crysis\Bin64\Crysis64.exe

This application has failed to start because its side-by-side Configuration is incorrect. Please see the application event log for more details.

Then i do this and it says this

Activation context generation failed for "C:\Program Files (x86)\Electronic Arts\Crytek\Crysis\Bin64\crysis64.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762" could not be found. Please use sxstrace.exe for detailed diagnosis.\

and then in details
For XML view

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="SideBySide" />

<EventID Qualifiers="49409">33</EventID>

<Level>2</Level>

<Task>0</Task>

<Keywords>0x80000000000000</Keywords>

<TimeCreated SystemTime="2007-11-29T11:15:04.000Z" />

<EventRecordID>2879</EventRecordID>

<Channel>Application</Channel>

<Computer>FrulletsComp</Computer>

<Security />

</System>


- <EventData>
... Read more

A:SidebySide Error once again In Crysis

i've updated to the latest dx10 version.

now it works for me

1 more replies
Answer Match 57.54%

I just got this thing set up the day before Christmas and already I got problems. It's a new hard drive with a clean install of Windows 7. My event logs is full of this error relating to the external hard drive where I want to store my backup images. Still checking into the other errors. The warning is something to do with my ISP timing out.
Should I uninstall the external hard drive and see if I can install it without the "smartware"??

A:error code 33 sidebyside??

  
Quote: Originally Posted by total confusion


I just got this thing set up the day before Christmas and already I got problems. It's a new hard drive with a clean install of Windows 7. My event logs is full of this error relating to the external hard drive where I want to store my backup images. Still checking into the other errors. The warning is something to do with my ISP timing out.
Should I uninstall the external hard drive and see if I can install it without the "smartware"??


Event ID 33 is a version conflict. Basically windows thinks you should have one version of the named file in the snip, but you have another.

You can search for and find all the version and eliminate them the re-boot and let windows find the correct version

Kenn J

5 more replies
Answer Match 57.12%

i have 2nd Notebook , and when i want run some application , there's error like this

"The Application has failed to start because its side-by-side configuration is incorrect. please see the application event log or use the command-line sxstrace.exe tool for more detail"

there's any solution ?

A:Error SidebySide when running Application

Hi sle3pingz

Try to run a SFC /scannow

Open up an elevated command prompt . Click on the button type CMD inside the Search programs and files box right click on CMD under Programs (1) choose Run as administrator



   Note
Command Prompt opens to C:\Windows\System32>_
Type


Code:

SFC /scannow
Press [ENTER] after you typed in the command .

4 more replies
Answer Match 57.12%

Not really sure where to post this question - any help will be appreciated though!

Have a Win 7 Pro desktop. Looking in the Admin Events and see the following Error with an Event ID=63.

Activation context generation failed for "D:\Program Files (x86)\MySQL\MySQL Server 5.0\bin\MySQLInstanceConfig.exe".Error in manifest or policy file "D:\Program Files (x86)\MySQL\MySQL Server 5.0\bin\MySQLInstanceConfig.exe" on line 6. The value "asAdministrator" of attribute "level" in element "urn:schemas-microsoft-com:asm.v1^requestedPrivileges" is invalid.

How is this fixed?

Thanks - Tom
 

More replies
Answer Match 57.12%

Hello,

I am having some issues with a particular online game. They locked my thread stating that the errors I get while playing their game, and only their game have nothing to do with their game.

So I am stuck trying to figure this out on my own, I am hoping you fine folks can help me out in this regard.

I am attaching a saved copy of my event log that shows the errors I get, which for quick reference are the following:

- System

- Provider

[ Name] SideBySide

- EventID 33

[ Qualifiers] 49409

Level 2

Task 0

Keywords 0x80000000000000

- TimeCreated

[ SystemTime] 2012-03-28T04:30:03.000000000Z

EventRecordID 1456

Channel Application

Computer DigitalGoddess

Security

- EventData Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",versio n="8.0.50727.4053"

c:\gPotato.com\allods online\Patches\patch_usgala_2.0.06.65.1_2.0.06.66_.patch\SyncVersion.exe
- Every single error has to do with one of those patches, here is a full list:

Activation context generation failed for "c:\gPotato.com\allods online\Patches\patch_usgala_3.0.00.57_3.0.00.57.1_.patch\SyncVersion.exe".

Activation context generation failed for "c:\gPotato.com\allods online\Patches\patch_usgala_3.0.00.57.1_3.0.00.63_.patch\SyncVersion.exe".

Activation context generation failed for "c:\gPotato.com\allods online\Patches\p... Read more

A:Error Code 33 SidebySide 0x80000000000000

Sounds like your redistributables are not all installed:Re-install or install the following:Visual C++ 2005 Redistributable (x86)
Visual C++ 2005 Redistributable (x64)
Visual C++ 2008 Redistributable (x86)
Visual C++ 2008 Redistributable (x64)
Visual C++ 2010 Redistributable (x86)
Visual C++ 2010 Redistributable (x64)
Once the above are installed, install all their updates through Windows Update.

9 more replies
Answer Match 57.12%

I'm running Office 2010 and 2013 side-by-side, and ever since the installation of 2013 Lync has been crashing whenever I try to create or reply to a message.  The error in the event log is:
Activation context generation failed for "C:\Program Files\Microsoft Office 15\root\office15\lync.exe.Manifest".Error in manifest or policy file "C:\Program Files\Microsoft Office 15\root\office15\UccApi.DLL" on line 1. Component identity
found in manifest does not match the identity of the component requested. Reference is UccApi,processorArchitecture="AMD64",type="win32",version="15.0.0.0". Definition is UccApi,processorArchitecture="x86",type="win32",version="15.0.0.0".
Please use sxstrace.exe for detailed diagnosis.

The EventID is 35, and the Source is "SideBySide".  I have tried re-running the installer, but the error persists.

A:Lync crashes with SideBySide Error 35

It seems Lync is an MS Office application and not a part of the Windows 7 operating system:

http://office.microsoft.com/en-us/support/getting-started-with-lync-2013-FX103299702.aspx
Therefore the appropriate place to discuss your situation with Lync is in the MS Office forums found @

http://social.technet.microsoft.com/Forums/office/en-us/home?category=officeitpro%2Cvisio2010%2CgrooveserveritproPlease remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

6 more replies
Answer Match 57.12%

Hello buddies, it's me again.
It's a week now that my PC - usually in the morning, but not only - freezes: the mouse stops and I only can reset. Then the computer starts normally, only 1 time did a check disk on a secondary drive.

I ws thinking about my mobo, it's not so young now so maybe needs an update. But I cannot find anything for Seven and I cannot understand why this problem happens only some time.
My mobo is an Asus P5W DH Deluxe and in HERE no Seven
My last event log :





Quote:
Log Name: System
Source: Microsoft-Windows-Kernel-Processor-Power
Date: 22/11/2010 09:43:03
Event ID: 6
Task Category: (6)
Level: Error
Keywords:
User: SYSTEM
Computer: LioSeven-PC
Description:
Some processor performance power management features have been disabled due to a known firmware problem. Check with the computer manufacturer for updated firmware.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Processor-Power" Guid="{0F67E49F-FE51-4E9F-B490-6F2948CC6027}" />
<EventID>6</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>6</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2010-11-22T13:43:03.198422300Z" />
<Event... Read more

A:System Freeze up and SideBySide Error

Here you go me again

Your .dmp file shows a stop error of 0x124 which is a general hardware error .. A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error and what to try here... Stop 0x124 - what it means and what to try Stop 0x124 - what it means and what to try

3 more replies
Answer Match 57.12%

Iím running windows Vista x 64.
Yesterday I downloaded Windows Live Messenger.
When clicked windows live Messenger appeared an error : sidebyside error
I followed the information given by the Event Log, and I found both Manifest, but really I donít what to do with them. I'm not sure how to solve this problem.
Following some tips from the Internet I re-installed C++ redistributable, but the error persist. The tips from Tech Guy Support do not apply to my computer.
Iím frustrate I cannot use the webcam
I hope you can open the link and see in the Power Point all the information that I got. I hope somebody can help me to solve this problem
https://www.dropbox.com/sh/7ayzchnbhwuxxwk/tG-7tOTqCL?m
 

A:Solved: Vista Sidebyside error

This problem is all over the web and the only fix I've come accross is to use an older version of WLM from here:

http://www.filehippo.com/download_msn_messenger/

Either that or dump it altogether and use some other IM software.
 

2 more replies
Answer Match 57.12%

I have a machine that is blue screening at random. The only clue I haveis that the system log is full of sidebyside errors.

The error reads:
"resolve partial assembly failed for microsoft.VC80.MFCLOC referenced error message:the referenced assembly is not installed on your system."

Any help would make me wet my pants, and be greatfully recieved.
 

More replies
Answer Match 57.12%

Not really sure where to post this question - any help will be appreciated though!

Have a Win 7 Pro desktop. Looking in the Admin Events and see the following Error with an Event ID=63.

Activation context generation failed for "D:\Program Files (x86)\MySQL\MySQL Server 5.0\bin\MySQLInstanceConfig.exe".Error in manifest or policy file "D:\Program Files (x86)\MySQL\MySQL Server 5.0\bin\MySQLInstanceConfig.exe" on line 6. The value "asAdministrator" of attribute "level" in element "urn:schemas-microsoft-com:asm.v1^requestedPrivileges" is invalid.

How is this fixed?

Thanks - Tom

A:SideBySide Admin Event Error

IMO, that's a brain dead service in the first place - - just disable it and be happy

2 more replies
Answer Match 56.28%

I tried this question on Microsoft forums but got no sensible replies... I've done better here on this site recently (and 7 in the past). Perhaps someone here can help. I'd appreciate any insights.

I performed Clean install of Win 8 Pro 64 bit and on every boot I get this error. I also did safe boot with the same issue.
Activation context generation failed for "C:\Windows\WinSxS\amd64_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.4053_none_8444db7d32915e4c\MFC80U.DLL". Dependent Assembly Microsoft.VC80.MFCLOC,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",v ersion="8.0.50608.0" could not be found. Please use sxstrace.exe for detailed diagnosis. could not be found. Please use sxstrace.exe for detailed diagnosis.could not be found. Please use sxstrace.exe for detailed diagnosis.
I have installed C++ redistributable 2005 (required for Office 2010). I tested adding all of the others 2008, 2010 and 2012 32 and 64bit but the error still occurs. I have removed all the others (by doing clean install) as they did not help with this issue so only 2005 is installed along with 2005 SP1 along side Win 8 Pro 64 bit.
As the problem happens with clean boot it must be a Microsoft issue I suppose but I can not get an answer there.

What I can see is this:
C:\Windows\WinSxS\amd64_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.4053_none_8444db7d32915e4c contains mfc80, mfc80u, mfcm80 and mfcm80u.
T... Read more

More replies
Answer Match 56.28%

I tried this question on Microsoft forums but got no sensible replies... I've done better here on this site recently (and 7 in the past). Perhaps someone here can help. I'd appreciate any insights.

I performed Clean install of Win 8 Pro 64 bit and on every boot I get this error. I also did safe boot with the same issue.
Activation context generation failed for "C:\Windows\WinSxS\amd64_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.4053_none_8444db7d32915e4c\MFC80U.DLL". Dependent Assembly Microsoft.VC80.MFCLOC,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",v ersion="8.0.50608.0" could not be found. Please use sxstrace.exe for detailed diagnosis. could not be found. Please use sxstrace.exe for detailed diagnosis.could not be found. Please use sxstrace.exe for detailed diagnosis.
I have installed C++ redistributable 2005 (required for Office 2010). I tested adding all of the others 2008, 2010 and 2012 32 and 64bit but the error still occurs. I have removed all the others (by doing clean install) as they did not help with this issue so only 2005 is installed along with 2005 SP1 along side Win 8 Pro 64 bit.
As the problem happens with clean boot it must be a Microsoft issue I suppose but I can not get an answer there.

What I can see is this:
C:\Windows\WinSxS\amd64_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.4053_none_8444db7d32915e4c contains mfc80, mfc80u, mfcm80 and mfcm80u.
T... Read more

More replies
Answer Match 56.28%

Good Day, I used to have a nvidia card but it broked. And a friend gave me a ATI card.
Install the driver w/o a problem. Then install the catalyst next, error pop up :
"The application has failed to start because its sid-by-side application is incorrect.... use the command-line sxstrace tool for more detail."

I have here a screenshots for the said error.


And also the results of sxstrace but i dont know what is it.

A:Error when installing ATI Catalyst!!! event id: 35 App: sidebyside

Ok, mark this as solve.
What i did is download and install this Microsoft Visual C++ 2005 SP1 Redistributable Package (x86) and then the installer run w/o problem.

2 more replies
Answer Match 56.28%

I have a Dell Studio XPS 9100 computer with Windows 7 Prof installed. After some trouble shooting, I found out that every time I use the ShadowProtect Desktop Imaging Program, I see the below red circle error in the event viewer. I would very much appreciate any help in resolving ths problem. Thanks, Sam.

Log Name: Application
Source: SideBySide
Date: 11/21/2010 11:04:32 AM
Event ID: 33
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: SCAMARDO
Description:
Activation context generation failed for "C:\Windows\WinSxS\x86_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.762_none_0c178a139ee2a7ed\MFC80U.DLL". Dependent Assembly Microsoft.VC80.MFCLOC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0" could not be found. Please use sxstrace.exe for detailed diagnosis.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SideBySide" />
<EventID Qualifiers="49409">33</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-11-21T17:04:32.000000000Z" />
<EventRecordID>2391</EventRecordID>
<Channel>Application</Channel>
<Computer>SCAMARDO</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft... Read more

More replies
Answer Match 55.44%

So I was installing a language software today and I managed to get it loaded, however I had to restart my computer to an earier date for other reasons so I had to re-install the language software. Upon re-installing the language software I recieved a message stating "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail."

However, when I try to open the sxstrace a little black screen flashes on my computer for a split second and then disappears but won't bring it up :-/.

I vied my event logs and I see two different errors for the side by side. The first is event ID 33 and says activation context generation failed for C:/windows/installer/{67E03279-F703-408F-B4BF-46B5FC8D70CD}/WksWP.exe" Dependent Assembly msadctls,processorArchitecture='x86", type="Win32", version="1.0.1801.0" could not be found. Please use sxstrace.exe for detailed diagnosis.

the second one is event id 59 and says activation context generation failed for "D:/setup.exe" error in manifest or policy file "D:/setup.exe" on line 0. Invalid Xml syntax.

Ive tried a few things to fix it already but to no avail....if anyone could please help me fix this I would greatly appreciate it!

A:Installing language software, sidebyside error or D:/ not a vald win32

I have two suggestions:

1. this "sxstrace.exe tool" seems to be a command-line tool. This means, that you are not supposed to click on it, but rather open the command line window (Start -> All Programs -> Accessories -> Command Prompt). There you have to type sxstrace to start the tool. Most likely, you will have to first navigate to the folder where the tool is located, or type the explicit path (something like "C:\Program Files\...enter the correct path here ...\sxstrace"). Quite possible the tool has some options as well. You should read the description of the tool at the developers website.

2. It seems that restoring Windows did not uninstall your first installation of the language software. So now you have two copies of it installed and the app does not like it. Try a complete uninstall. For this, you should go to the developers website and find instructions. Usually complete uninstall instructions are provided or they might have a tool to do this automatically. Alternatively, you can use Revo Uninstaller to do the job.

Once the app is uninstalled, you can use CCleaner to make sure that nothing is left over. After that you can install the app again. Hopefully this time it will work.

1 more replies
Answer Match 49.98%

Hi, after I installed the latest Vista updates and rebooted, I get an error when I try to open Chrome, see attachment for how it looks, and for the event viewer error log. Strangely, when I try using Chrome from a different user it works, which is how I'm on the web right now. From the research I did on this problem it seems there's a program version conflict, whatever that means. It mysteriously started once the updates were installed, even though Chrome wasn't updated now.

I ran SxsTrace Trace -logfile:SxsTrace.etl command in the Command Prompt, and I copied the report log below.

I also attached a screenshot of all the updates that were installed in the last round, after which the problem started (disregard the one highlighted in blue, I just happened to click it).

Please help, I thank you in advance!

-----------------------------------------------------

=================
Begin Activation Context Generation.
Input Parameter:
Flags = 0
ProcessorArchitecture = x86
CultureFallBacks = en-US;en
ManifestPath = C:\Users\Sim\AppData\Local\Google\Chrome\Application\chrome.exe
AssemblyDirectory = C:\Users\Sim\AppData\Local\Google\Chrome\Application\
Application Config File =
-----------------
INFO: Parsing Manifest File C:\Users\Sim\AppData\Local\Google\Chrome\Application\chrome.exe.
INFO: Manifest Definition Identity is (null).
INFO: Reference: 34.0.1847.137,language="*",type="win32",version="34.0.1847.137"
INFO: Reference: Microsof... Read more

A:Solved: After update I got "SideBySide" error with Chrome

16 more replies
Answer Match 44.94%

"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail"

I have a new Windows HP running vista 64 bit.

Someone please explain in detail what i need to do to fix this. I have researched this problem and tried doing a couple things but it doesnt work.

Tried installing C++,what ever that is (Please explain too).
System restore did nothing.

I know it can be fixed i just cant figure it out on my own.

Im a college student with a project due in a week and im freaking out. Please help.
 

A:Sidebyside

by the way, this message pops up when I try to open about 90% of my programs and it wont let me open them
 

3 more replies
Answer Match 44.94%

Hi everybody!I have a problem already for a few months.When my Windows Vista Business starts - everything freeze. Nothing works for a few minutes.Event Viewer says next:SideBySideActivation context generation failed for "C:\Windows\Installer\{67E03279-F703-408F-B4BF-46B5FC8D70CD}\WksCal.exe". Dependent Assembly msadctls,processorArchitecture="x86",type="win32",version="1.0.1801.0" could not be found. Please use sxstrace.exe for detailed diagnosis.Activation context generation failed for "C:\Windows\Installer\{67E03279-F703-408F-B4BF-46B5FC8D70CD}\wksdb.exe". Dependent Assembly msadctls,processorArchitecture="x86",type="win32",version="1.0.1801.0" could not be found. Please use sxstrace.exe for detailed diagnosis.Activation context generation failed for "C:\Windows\Installer\{67E03279-F703-408F-B4BF-46B5FC8D70CD}\wksss.exe". Dependent Assembly msadctls,processorArchitecture="x86",type="win32",version="1.0.1801.0" could not be found. Please use sxstrace.exe for detailed diagnosis.Activation context generation failed for "C:\Windows\Installer\{67E03279-F703-408F-B4BF-46B5FC8D70CD}\WksWP.exe". Dependent Assembly msadctls,processorArchitecture="x86",type="win32",version="1.0.1801.0" could not be found. Please use sxstrace.exe for detailed di... Read more

More replies
Answer Match 44.52%

I am trying to run some 64bit programs on my new PC (Win7 Pro 64bit). Each time I attempt to run them i get an error box appear stating the following:

"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe.tool for more detail"

When i got to the event log i get the following message which doesn't mean much to me.

"Activation context generation failed for "d:\teklastructures\15.0\nt\bin\xs_cancel.exe.Manifest". Dependent Assembly Microsoft.VC80.MFC,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",vers ion="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis."

Programs failing include, Tekla Structures V15 64bit, DWG TrueView 2010 64bit, but funnily enough on a 64bit OS it is only the 64bit programs causing the problem.

Can any one help me as i am not able to run the programs i need to making the win7 machine an expensive paper weight

Thanks,
Bevin

A:Event 33, SideBySide

See if you have these runtime programs installed. VC80.MSC is part of these packages.

You are probably missing the (x64) version.

Here are the links.
http://www.microsoft.com/downloads/d...displaylang=en

http://www.microsoft.com/downloads/d...displaylang=en

After installing run Windows Update to get the two update programs.

Jim

4 more replies
Answer Match 44.1%

Open 2 windows, then right-click taskbar and select Show windows side by side. Then right-click taskbar and Show windows stacked. Now right-click taskbar and Undo stacked. I find that I am back to the side by side view with no option to Undo it, and no quick way to get back to where I started. It's the same when selecting Stacked first and then go to Side by side without Undoing first. (Or Cascaded as well)

Windows is only remembering the last view as the "Restore" view but I want it to remember more than 2! Possible?

I'm not going to suffer much if it isn't, as I'm using Brink's Shortcuts, but I would like to get back to my original arrangements after going back and forth between the other views, without having to Undo each time.

A:SideBySide & Stacked - can you replicate this please

Unless I'm missing something here, all you need to do is expand the window that you want to look at. Am I not comprehending what you want to do?

8 more replies
Answer Match 44.1%

Hello people,
 
Let me say that I'm not really sure if this is the correct place to post this question, if that's so, please move it accordingly
 
So, here's my question. I have a few messages on the event log regarding sidebyside errors with ID 33, three are for visual studio components and another is for a vmware workstation component.
The errors I'm talking about read as such:
VMWare Workstation 7.0.1.11056
Activation context generation failed for "c:\program files\VMware\vmware workstation\vssSnapVista64.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="amd64",
publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762" could not be found. Please use sxstrace.exe for detailed diagnosis.
 
Visual Studio 2010
Activation context generation failed for "C:\Program Files\Microsoft Visual Studio 10.0\Common7\IDE\Remote Debugger\ia64\msvsmon.exe". Dependent Assembly Microsoft.Windows.Common-Controls,language="&#x2a;",processorArchitecture="ia64",
publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.0.0" could not be found. Please use sxstrace.exe for detailed diagnosis.
Activation context generation failed for "C:\Program Files\Microsoft Visual Studio 10.0\Common7\Packages\Debugger\X64\msvsmon.exe". Dependent Assembly Microsoft.Windows.Common-Controls,language="&#x2a;",processorArch... Read more

A:SideBySide errors event ID 33

Hi,
 
Based on my further research, Event ID 33 is logged in the Application log when you start an application that has versioning conflicts. This kind of error doesn’t
affect the functionality of application. You can safely ignore this. BTW, from your event log, it seems to be more related to Microsoft Visual Studio 2010. If you do would like to prevent event error from being logged, you may need to isolate applications
and Side-by-side Assemblies to correct the DLL versioning conflicts, please visit the following site for reference:
 
Isolated Applications and Side-by-side Assemblies
 
Best Regards
Dale

34 more replies
Answer Match 44.1%

after 3-4 months of occassionally rebooting because of blue screens, i had 3 in a row so i called Sony support. using remote access to my Sony Viao the tech found an adware virus called sidebyside, hidden twice in my computer. He could not delete it and told me to wipe & reinstall. easy to say, so i am appealing to the sages with any advice; i have backed up all data. symantec.com states it is a low level threat, webroot doesn't know it exists.

A:how to remove sidebyside virus?

Originally Posted by Kim M


after 3-4 months of occassionally rebooting because of blue screens, i had 3 in a row so i called Sony support. using remote access to my Sony Viao the tech found an adware virus called sidebyside, hidden twice in my computer. He could not delete it and told me to wipe & reinstall. easy to say, so i am appealing to the sages with any advice; i have backed up all data. symantec.com states it is a low level threat, webroot doesn't know it exists.



The sidebyside virus is an adware virus with a low risk impact. It causes pop-ups to appear.

"Updated: February 13, 2007 11:45:39 AM
Type: Adware
Publisher: sidebysidesearch.com
Risk Impact: Low
File Names: sbss.exe
Systems Affected: Windows 2000, Windows 95, Windows 98, Windows Me, Windows NT, Windows Server 2003, Windows XP
Behavior
Adware.SideBySide directs web searches to sidebysidesearch.com, and displays pop-up ads.

Adware.SideBySide - Symantec.com
"

You may have other infections that are causing your problems.

Download and run Malabytes Rogue Remover

Run Hi-Jack This Despite all of your security and protection you may still get infected with spyware or a web browser hijacker that the other tools are unable to detect for some reason. HiJack This will generate a report of all browser add-ons, buttons and start-up items to help you determine rogue items and remove them.
www.spywareinfo.com

And post the results here.

Removal instr... Read more

1 more replies
Answer Match 44.1%

hi
i update w7 32bit ,with internatl update

after i found many errors
id 33
event SideBySide
log type Application

Activation context generation failed for "C: \ Windows \ system32 \ conhost.exe".
Could not find dependent assembly
Microsoft.Windows.SystemCompatible,processorArchitecture="x86",publicKeyToken="6595b64144ccf1df",typ e="win32",version="6.0.7600.16823".
Use sxstrace.exe to get a detailed diagnosis.

but sxtrace does not give more information

does someone know about this error?
i googled it , but did not find a good answer

thanks
cheers

A:update and errors 33 SideBySide help

I have the same thing as well.

I think I have narrowed it down to four Win security updates I installed .

kb2555917, kb2532531, kb2507938, kb2552343..

I noticed that just after installing these updates the side by side you mention started to occur.

Guess it might be worthwhile to try and remove each one separately and then monitor the event viewer for a day to see if the error goes away.

I notice on my notification it adds the additional information about the AMD 64 compatible system architecture processor.....but I don't have an AMD processor I've got Intel.

Have you noticed any problems or usability issues since you started getting the error?

I haven't noticed anything problematic with my pc ...yet anyway.

9 more replies
Answer Match 44.1%

Checking in the Event Viewer, I found 7 of these errors occurring within 15 minutes of each other. At the time that they occurred, the system was idle and doesn't have anything to do with rebooting. They originate from totally different programs, and happened at a times hours apart from the time of any scans scheduled by Outpost Security Suite. Here is a list of the errors:






Quote:
Activation context generation failed for "C:\Program Files (x86)\BurMan\Nero 8\Nero Toolkit\DiscSpeed.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16385_none_fa645303170382f6.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16385_none_421189da2b7fabfc.manifest.

3 instances in a row of:

Activation context generation failed for "C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\bin\ia64\pgocvt.exe". Dependent Assembly Microsoft.VC90.CRT,processorArchitecture="ia64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",versi on="9.0.21022.8" could not be found. Please use sxstrace.exe for detailed diagnosis.


Activation context generation failed for "C:\Program Files (x86)\Common Files\A... Read more

A:Multiple SideBySide Errors

Hey SM,

Here's some instructions for running sxstrace:
Junfeng Zhang's Windows Programming Notes : Diagnosing SideBySide failures

I'm seeing the same errors in my event log. I followed the instructions and created the .etl file but when I ran the converter to create the text file it was empty. I tried a few times. Sorry I wasn't much help. Maybe you'll have better luck.

First I ran the first sxstrace comand to enable sxstrace (as in the instructions) then I tried to run pgocvt.exe from both the command line and win explorer while the trace was enabled. Then I stopped the trace and saw it generated a .etl file, then I ran the sxstrace parse command to convert it to text, but as I said, the txt file was empty????

I noticed these events started about 4 days ago - at about this time I upgraded lavasoft AdAware and noticed during the install it said it would install new vc runtimes - I didn't think anything of it at the time but now I'm wondering if I hosed my machine. I haven't seen any side effects other than the event logs and my machine isn't the IA64 version, it's the amd64 so maybe it's no problem. One of the erorrs mentioned a problem with Windows Live Movie Maker but I just ran it and it seems OK.

Let me know if you find anything & good luck.

5 more replies
Answer Match 43.68%

The rest fo the error message says- "Failed to read configuration file. Please contact system administrator"
I have just R and R'd Firefox and I'm still getting this error message. It won't run now and now I see just how horrible IE is in XP,since I'm forced to use it now....sob
Please Help!!

A:Firefox won't startup-Error message says "Configuration error"

Only an idea!!!!  Not sure but it may be the newer FF may not run well on XP, you could experiment by down loading and older version.
 
Just checked I may be right check the link below!
 
https://support.mozilla.org/en-US/kb/firefox-no-longer-works-some-versions-windows-xp

7 more replies
Answer Match 43.26%

I?ve been experiencing several BSODs. I contacted the Windows XP Support area (post titled Blue screen of death) and it is thought that there are several things going on including picking up some malware called SideBySide found in my Event Viewer. So I need to get rid of the malware if possible.
Also, my monitor is sometimes dead and occasional loss of modem (dial-up) and things are running weird and sometimes slow.
Thank you for any help.

A:malware SideBySide found on Windows XP Support

BUMP, please

2 more replies
Answer Match 43.26%

I've been getting messages that say "This application has failed to start because its side-by-side configuration is incorrect" for nearly all my programs. My Internet Explorer 64bit still works, as does notepad and a handful of other applications.

I spent the past few days researching how to fix this, and have tried several things to no avail-
- sfc/ scannow in the command prompt finds a corrupted file but can't fix it
- restoring my computer to a previous point, even several weeks back, has no effect.
- restarting my computer in safe mode and then trying sfc/ scannow didn't help. in fact, now my laptop is stuck in safe mode.
- I did a virus scan with TrendMicro, but just caught some spyware and low-threat items.
- Anything I download comes up with the sidebyside error when I try and install it.

Through the event log, I have located the problem manifest file. I'm at home right now and might be able to replace the corrupted/broken one with a working file from my family's home computer. My question is if I should go ahead with the procedure and see if it will work?

Here are my specs:
Dell Studio XPS 1340
Intel Core 2 Duo Processor p8600
4GB RAM
Windows Vista Home Premium
Service Pack 1

My home computer is the same OS as this one.

This problem happened pretty much without warning- my laptop worked fine in the morning and then later that evening the problems began occuring. I did drive with it from Lubbock to San Antonio but I doubt that would have effected t... Read more

More replies
Answer Match 42.84%

Hello everyone! I've been attempting to fix this for the better part of today, and I'd appreciate some assistance if any of you have a spare moment. I am running Windows 7 Home Premium 64-bit.

I woke up this morning and tried to log-on to the Internet with my USB dongle(I live in rural China and USB internet is one of my few realistic options). It has worked flawlessly for the 7 months I've been here, but only today did it start acting up.

According to my Event Viewer, I have two main errors. EventID 20227 RasClient and EventID 33 SideBySide:

"CoId={353250BF-427F-4F94-8A61-F8044E405FE5}: The user AndrewD-PC\Andrew dialed a connection named USB-KEY DIAL which has failed. The error code returned on failure is 0."

"Activation context generation failed for "C:\Program Files\Chinatelecom C+W\MFC80U.DLL". Dependent Assembly Microsoft.VC80.MFCLOC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",ver sion="8.0.50608.0" could not be found. Please use sxstrace.exe for detailed diagnosis."

I noticed that 'Win32' is mentioned in the error for EventID 33. When I searched for ways to try and fix the SideBySide error, I decided to download the 2008 SP1 redistributable package for Visual C++, but when I tried to open the download.. it said something like "Error: This is not a valid Win32 application".

Does anyone have any idea what these two errors mean and how to fix them? I be... Read more

A:Did My OS Revert to Win32? Event IDs 20227 RasClient and 33 SideBySide

Try How can i tell if my computer is running a 32 bit or 64 bit version of windows: 32-bit and 64-bit Windows: frequently asked questions - Microsoft Windows Help to try checking if it is not just the software that is 32bit.

2 more replies
Answer Match 41.58%

I created this post to help people searching for solutions to Windows Error Messages:

Visual C++ Redistributable Library Missing
Application has failed to start because its side-by-side configuration is incorrect
Application Failed to Start
Dependent Assembly Missing
Activation context generation failed
so as to help find this post when using a search engine

Some background: Many Windows apps are built using Visual C++ libraries. The tricky part is that there are many different "versions" of "assemblies" of the C++ libraries in both 32-bit and 64-bit architecture "flavors". So the trick is tracking down the right flavor of the right assembly and version of the C++ library you need.

For further help, see this thread (in general) and this post and this post (in particular) for solutions

For how to look through your Application Event Log for application event messages click here
 

More replies
Answer Match 41.58%

using windows xp on my presario sr1103wm i ran the recovery in the pc repair program and after it restarted all i get is this error message has detected a configuration error (code purple) and the computer is non-responsive help
 

More replies
Answer Match 41.58%

Hi

I just re-installed windows XP pro on my dell pc,and when i come to switch on the machine ,i get a message before startup saying invalid configuration information.
I have to wait and then it starts up. It has also reset the time and date.

The battery inside was fine before i wiped it-could it be the BIOS ?

Any help would be very welcome
Thank You
 

More replies
Answer Match 41.58%

I have an HP pavilion A6303w,every I tried to booted it.It always come with a message stated configuration error code purple...It's a windows vista desktop..I even try to change the windows vista to windows xp..As soon as I insert the cd in the drive,it started downloading just fine.As soon as it started to set up the windows it stop..And come back with that message configuration error..Please help thanks.
 

A:Configuration error.

I have never seen something give an error message "code purple". Maybe it is a BIOS error message? Do you see that "code purple" as you boot the machine or would Windows start running and give you that error ?
 

2 more replies
Answer Match 41.58%

When I try to run SPSS which I recently installed it receive an error message stating that the application can't run because of a configuration error. Can any one help with this? My professor was telling me what that meant and honestly really freaked me out.

A:Configuration Error

It simply means that it didn't install properly/completely...for whatever reason. It's not set up properly for use.Program settings are configured (usually) after install...or using the default settings.Google LinksLouis

1 more replies
Answer Match 41.58%

Hello,

This is the first time here for me, have searched the forum and could not find an answer to solve my problem, maybe I have overlooked it.

Here is the problem, when I turn my computer on I get this error message.

CPU = Intel (R) Pentium (R) 4 CPU 2.00GHz
639K System Ram Passed
638M Extended RAM Passed
512k Cache SRAM Passed
System BIOS shadowed
Video BIOS shadowed
ATAPI CD-ROM: Sony DVD RW DRU-720A
ATAPI CD-ROM: HL-DT-STDVD-ROM GDR8160B
Mouse initialized
ERROR
0162: Configuration Error - Default configuration used

Press F1 for Setup
If someone could give me some guidance it would be greatly appreciated, the operating system is Windows XP Pro.

Thank you
wicewater
 

A:Configuration Error

7 more replies
Answer Match 41.58%

when i try to start a game it says it cannot
open the configuration
 

More replies
Answer Match 41.16%

Greetings,

Here is a problem with a Gateway M350I laptop with Vista SP1 factory installed.
Since June, when bought it has a dual boot setup with PClinuxOS with no problems until now.
The laptop was not shut down for a couple days after patch tuesday.
When fired up on Friday 13th morning, an error message : ireboot side-byside error. Not to blame ireboot. Any app started such as firefox gets same error.
it almost seemed to be so much like malware. Antivirus and spyware turned off by windows security warning in systray etc.
But it looks like patch tuesday february 2009 broke this system.
When trying to install the update, it goes into a reboot loop. it gets to 83% the computer reboots, gets to 83% and reboots again.
This laptop is used by a savy woman with auto update on, avg antivirus, does not open attachments or click on links in email. and uses firefox.
During this week noted firefox should be updated to 3.6, and ie7 was a target.
thanks in advance, and apologize for not hanging around in here to help others. All my linux clients don't have malware or update issues, but they have friends with windows.
I will peer in here to help at times, but for hardware tech stuff. Keep up the good work!

A:update reboot loop after sidebyside errors from february 2009 patch tuesday

Installing the Visual C++ 2005 Redistributable Package (x86) seems to fix most side by side errorshttp://www.microsoft.com/downloads/details...;displaylang=en

8 more replies
Answer Match 41.16%

I'm having this issue

TCServer.ext - Configuration Error

Unable to load Jit Compiler (MSCORJIT.DLL)
File may be missing or corrupt
Please check your setup or rerun setup!

Basically when I did a google search I came up with this patch for what everyone says is a memory leak.

http://www.microsoft.com/downloads/d...displaylang=en

This didn't solve my issue.
The actual issue is that this error comes up as soon as I log into windows and either freezes me straight away or resterts.


- Version of the OS. XP Tablet Edition
- Security Patches - Unknown. I can't use the tablet long enough to check
- If the OS produces an error, either upload a screenshot of the error message (ALT+PrtScrn), or literally quote See above
- Were there recent crashes that could have caused this problem?Unknown
- Did you install new software recently? If this is the case: Which software? (Brand, version, build)Unknown
- Did you do any of the following:
- Run a scan with an updated anti-virus program?No, can't
- Run a scan with an updated anti-Trojan program?No, can't
- Run a scan with an updated root kit detection program? (This only for Windows NT, W2K and newer!)No, can't
- Run anti-spyware scans with at least two freshly updated anti-spyware programs? No, can't
If any of these program found something, provide us with the information on what it/they found. N/A

More replies
Answer Match 41.16%

I'm using Win 7 ultimate 32 bit. I've a problem when configure DNS. I enter Local Area Connection Properties then click on Internet Protocol Version 4 but it show a window and disappear.

It like this video:

Who can help me, please?

A:Error! can not set up TCP/IP configuration on Win 7 ultimate

Can you access it in safe mode?

9 more replies
Answer Match 41.16%

I have tried everything but everytime I boot up my computer I get this hardware configuration error any suggestions on what I should or can do?
 

A:Hardware configuration error

What operating system do you use, and what is the brand and model, or configuration of your computer. What tasks are you running when you get the hardware configuration error... or does it even boot.
Tell us as much as you can, so we can imagine what you are up against.
 

3 more replies
Answer Match 41.16%

Hi, I am actually trying to configure a router, with a serial and fast ethernet interface..
now i have a network address of 192.168.50.1 and i have used 192.168.50.2 for the fast ethernet interface and 192.168.50.3 for the serial interface, but it giving me an error, saying its overlapping the fast ethernet address of 192.168.50.0, is there anything i'm doing wrong there? can anyone help me please...
 

A:Hi everyone i have router configuration error...

6 more replies
Answer Match 41.16%

I have Windows Me and when i try to boot up i get this error.


Cannot find System.ini.

Boot with emergency boot disc and type scanreg/restore

WHAT Do i do?? I dont have the boot disc. I have another computer with xp and if i need to download a file i can. Any help?
 

A:Registry Configuration error

Take your system to someone who can test your hard drive and reload Windows Me for you
 

2 more replies
Answer Match 41.16%

Friend has and HP a535w that is producing an error, machine boots up until the XP media center splash screen and then an error box appears:System Configuration ErrorThe system has detected a configuration error. Please report this error to customer care using the phone number found in the Warranty and support guide that came with your PC. Unless corrected this error will prevent your PC form operating properly.Turn off your PC by pressing and holding the power button. After a few seconds your PC will automatically turn off. (Code Purple).'i searched google and the only thing i could find http://www.resellerratings.com/forum/tech-...ode-purple.htmlwas that this had something to do with "tattooing" the recover to the motherboard, and a workaround was to attach the HDD to a usable system andopen up C:\hp\bin\ConfigCheck\cfgchk.bat with notepad and modify the section that checks to see if the hard drive is tattoo'd to have it not bother checking at all. (although the hard drive will be running as slave so replace the C:\ with whatever drive letter Windows assigns it) The line to remove is: "python c:\hp\bin\ConfigCheck\run.py". This worked great for me and I hope it helps anyone else who comes along this thread as an alternative to dealing with tattoo'ing the motherboard or hard drive. i did this and cannot find the .bat file, that path does not exist.this machine is out of warranty and we do not want... Read more

A:HP system configuration error

http://www.techimo.com/forum/applications-...ode-purple.htmla couple of pages into this thread seem to have several fixes.

4 more replies
Answer Match 41.16%

I have Windows Me and when i try to boot up i get this error.


Cannot find System.ini.

Boot with emergency boot disc and type scanreg/restore

WHAT Do i do?? I dont have the boot disc. I have another computer with xp and if i need to download a file i can. Any help?
Edit/Delete Message
 

A:Registry Configuration error

Yes this was copied from another thread. I posted it in the wrong place
 

2 more replies
Answer Match 41.16%

I'm on ADSL Zoom X3 modem connected to my PC with No other Router connected

when I used a bittorrent for the 1st time (Azureus), I got NAT error problems, this happened to everything I tried.
It tells me I have no remote access & icons stay on yellow?
I checked all the wizard configurations & whatnot, they all told me I have a NAT error

I just want to know if theres anything I can do? because when I switched to my AOL 56k connection, the NAT error was not present there
SO is my NAT messed up or not set up correctly???

I don't have a router so I can't open any ports only on it,
I'm only with my DSL modem, so I went to my DSL setup page

I went to the NAT CONFIGURATION OPTIONS
the screen had this info:

NAT : Enable
Mode: Dynamic

Session: blank (no other options listed but can be typed on)
User IP: blank (no other options listed but can be typed on)
Action: add (& another option for delete)

Number | Session | Name | User IP
# of NAT configurations: 0
I tried switching to disable NAT!
the description makes it seem like hackers can get to my IP & whatnot without it, but I tried anyways, BUT I could not connect to the net anymore after that, I had to re-enable it.

All I know on on Azureus is that in options it states 6881 as the incoming TCP listing port.
there is no Session or User IP info there to find & typing 6881 on User IP just tells me it's an inncorrect IP
can anyone help?
anyone with any knowledge of this??
is it poss... Read more

A:can ANYONE help me with a NAT error/configuration problem??

the other options on my dsl setup page other then NAT are:

WAN settings
LAN settings
NAT
Virtual Server
DMZ
DNS
ADSL Configuration
Route Table
Misc Configurations
Bridge Filtering
RlP Configuration

are any of those helpful to open the 6881 port?
 

1 more replies
Answer Match 41.16%

Hey there,

I'm on windows XP

when it comes to installing many new applications (not pirated or anything) I get this error

"C:\filelocation\program.exe

This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem."

It has happened both for the new MSN (Im stuck using windows messenger) and Ableton Live 8.03

I've obviously tried reinstalling a whole bunch of times, but no luck. Is my only option here reformat, could it be something viral? Or something more simple (i hope!)

Cheers and thanks a lot
 

A:Application Configuration error (XP)

8 more replies
Answer Match 41.16%

System details;
OS Windows 7HP 64bit
CPU AMD Phenom II Quad
Motherboard ASUS M4A79-T Deluxe 790FX
Memory 12BG Corsair XMS3
Video card Sapphire ATI Radeon HD 4890
Boot disk C:\ Samsung Spinpoint 1TB 7200 SATA II 32MB
Problem;
Tried to update Snagit 11 (build 207) to version 12.2.2 (build 2107) but when trying to install the update I get snagitup.exe-Configureation paser error, error parsing C:Windows|Microsoft.Net\Framework\v4.0.30319\config\machine.config Paser returned error 0xC00CE508
 
Would greatly appreciate any help 

A:Configuration Parser Error

Worth a look, Configuration Parser Error .
 
Louis

5 more replies
Answer Match 41.16%

I got this error after I did a Compaq System Recovery.
Your system has detected a configuration error. Please report this error to Customer Care using the phone number found in the Warranty and Support Guide that came with your PC. Unless corrected, this error will prevent your PC from operating properly. Turn off your PC by pressing and holding the Power button. After a few seconds your PC will automatically turn off. (Code Purple)
Help!
 

More replies
Answer Match 41.16%

Hello there. I hope I have posted this message in the right area. This morning I fired up my pc to find an error greeting me. It was that windows was missing a configuration file. I rebooted a couple of times then it came back up.

Once it did tho, it went through reloading all my hardware. Everything was fine so I thought. I then realized there was no sound. Xp is showing the Realtek onboard sound card there, indicating under Audio Devices, Properties that "This device is working properly" and "Driver is enabled but has not been started". However, under the main Volume tab it shows "No Audio Device".

I have verified under Services that Windows Audio is started and running (set to 'Automatic'). I have attempted to remove and resintall the device, tried alternate drivers, all to no avail. Any suggestions or recommendations on how to proceed would be so greatly appreciated!
 

A:Configuration error...now no sound.

7 more replies
Answer Match 41.16%

Immediately after upgrading to IE8, a Wireless Configuration error message began appearing and will not close even when I reboot my Acer Aspire 5600. It reads as follows:

Incorrect MFC Dll version installed on system, minimum requirement is MFC SP4 dll.

I located an answer from Dell for their computers in these Forums, but can't find anything here for Acer. Any help would be appreciated.

Laurie

A:Wireless Configuration Error

do you have a service running called Broadcom Wireless LAN Tray Service
control panel> admin tools> servive

3 more replies
Answer Match 41.16%

i had the sbc yahoo utilities on my comp with the browser and chat and little things like that and then i uninstalled it and tried to reinstall it and now i get an error half way through saying can not configure to my comp??? howcan i fix this???
Thanks
 

More replies
Answer Match 41.16%

Recently I've been getting a popup message at boot: Error detected retrieving default

configuration DEFAULT.ALC. I close the window and everything seems to run fine.
Anyone know what that's about or how to fix it??

Machine: Esystems
OS: WindowsXP Home
RAM: 1.5GB
Drive: 120GB
 

More replies
Answer Match 41.16%

ok heres the prob...
today my nephew was playing sims 2 and while he was playing he hit the shelf the tower was on..it fell less than 2 feet and not very hard since the cords slowed its fall...
now when i go to restart it i get this errors:

0162 configuration error
no dhcp or proxydhcp offers were recieved
1962 : no operating system found

im not sure what has happened or what I need to do now.
I was reading online and it said run setup but not sure what that meant.
 

A:0162 configuration error

Run setup probably means run Windows setup. But i think i may know what is wrong. Can you check the hard disk IDE cable, make sure both connections at either end of the cable are securely fixed into their sockets
 

2 more replies
Answer Match 40.74%

Hi i bought a COMPAQ pc, windows XP desktop in 2003 at a local Best Buy. I was creating a second user account for the system when it froze and shut down. Upon restart, the loading Windows XP black load screen that shows up right after power returns froze and a window came up saying system configuration error. I am currently 20 miles from my house ,and on a different computer obviously, but the i can remember that the error tells me that if problem is not fixed please call the number in my computer manual. I would LOVE to avoid waiting on the phone please help !~~!! please..My only solution i could think of was using the system restore disk but i do not even know if the boot up goes far enough for the PC to read the disk. Please help and thank you for your time.
 

A:System Configuration Error and no Boot up :(

Hi and welcome. See if you can start in safe mode. For a system this old, I doubt you'll get anywhere calling the number in the computer manual anyway.
 

1 more replies
Answer Match 40.74%

Hi
Having problems with connecting to my xbox 360

main problem is when media center is configuring extender and computor it ticks the first two boxes but on the configuring extender settings it take a long while before it comes up with

CONFIGURATION ERROR

An error was encountered while configuring your computter for use with this Extender.

Have tried the deleting of Certifiacate in mmc - still does not work
any clues please

Jeff

A:xbox 360 extender configuration error

I too am having the same problem but i don't even get the first tick.
Its not my Anti virus Firewall issue.
It is a modem/router port firewall issue.
What modem are you running?

3 more replies
Answer Match 40.74%

Get this message when I go to START,RUN ,WINIPCFG. PLEASE ADVISE SOLUTION TO AVOID THIS MESSAGE.TRYING TO RUN HOME NETWORK BETWEEN TWO COMPUTER 3FT APART.
 

A:fatal error; can not read IP configuration

You need to adnvise which version of Windows you are running, but have a look here anyway:
http://support.microsoft.com/default.aspx?scid=KB;en-us;286748&
 

1 more replies
Answer Match 40.74%

couple of times faced with the Illustrator crash and failure to start. Configuration error "Error 3". While trying to fix, found that somewhere lost file "c:\Program Files\Common Files\Adobe\Adobe PCD\pcd.db" (I am talking about Win XP). Tried to clean a temp folder, but this did not help. Scanned for viruses, all clean, as said antivirus. Reinstalling did not help in the matter too. I know i lose sight of something important and i need an advice.
 

A:how to fix Adobe Illustrator configuration error?

howdy and welcome.

I do NOT use Adobe Illustrator, but there are tons of people here who do. One thing I dug up in my digging was https://forums.adobe.com/thread/988381; have you taken a look there yet?
 

1 more replies
Answer Match 40.74%

I recently tried to turn on my pc and the boot manager screen is up and no matter what i do for several days now i cant get past this screen someone please help ive tried everything

A:Boot Configuration Error 0xc000000d

See Troubleshooting Windows 7 Failure to Boot

3 more replies
Answer Match 40.74%

I have previously been able to print an email in Windows Live Mail. I can print Internet pages and saved documents. Brother Printer support suggested I have a configuration error.

Any suggestions?

Thanks!

A:I have a configuration error that is preventing me from printing.

If you can still print from other applications but not Live Mail then it sounds like something's wrong with Live Mail accessing the printer. Maybe a re-installation of Live Mail is necessary.
My guess is if you provide more info on what exactly it is that keeps you from printing you'll get more feedback here.
Is there an error message? Or any other info to go by?
A print option dialog screen with a number of installed printers etc?

3 more replies
Answer Match 40.74%

Hi Guys,
I have recently installed windows developer preview, since installation I'm facing a problem while Outlook configuration.

after done all things when i test account setting it shows "log onto incoming mail server ERRR X fail"
Please guys help me regarding this

More replies
Answer Match 40.74%

hi,

also, each time i start the computer, there is the following message - error failed to load branding configuration -. couldn't find anything on the web. What could it be ?

THANK YOU

A:error message branding configuration

You really shouldn't duplicate post, if not for the integrity of the forum, then so that everyone knows what you are being told and you will not be pulled down two or more pathways to a fix, yano. but no foul, no harm, just acting on your behalf (and SF's)

Mike

1 more replies
Answer Match 40.74%

Hello! I installed HP BCU because i want to do stuff with my computer. You know... Anyways, every time i start it, it stays open for like half a second then closes. I recorded it, and at the end it shows the message: "<Warning> msg="BCU return value" real="17" translated="17" />" That is what it says right before it closes. Please help me. Thank you for your time, and have a great day!

More replies
Answer Match 40.74%

I istalled a new printer/copier/scanner recently and all seems to have gone smoothly. But now whenever I boot the system, load a cd, launch my dsl connection, etc, I get the message "please wait while Windows configures the printer" and/or ""searching for installed components" or something similar. Can anybody help? Thanks!
 

A:printer configuration error message

7 more replies
Answer Match 40.74%

Hi everyone. I am getting a Configuration Error on some sites. What does this mean?

Here's the text of the error:

Server Error in '/' Application.
--------------------------------------------------------------------------------

Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.

Parser Error Message: Failed to decrypt using provider 'RsaProtectedConfigurationProvider'. Error message from the provider: The RSA key container could not be opened.

Source Error:
Line 12: </configSections>
Line 13: <connectionStrings configProtectionProvider="RsaProtectedConfigurationProvider">
Line 14: <EncryptedData Type="http://www.w3.org/2001/04/xmlenc#Element"
Line 15: xmlns="http://www.w3.org/2001/04/xmlenc#">
Line 16: <EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#tripledes-cbc" />
Source File: C:\www.songtouch.com\web.config Line: 14
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
 

A:Configuration Error While Visiting Certain Sites?

*bump*
 

1 more replies
Answer Match 40.74%

I keep getting this error message at start up. It gives me the option of F1 to resume or F2 to enter set up. When I hit F1 it starts fine enough but I'm concerned about this. Follows is a start up list report and then a hijack this log.

start up list log

StartupList report, 4/15/2006, 8:49:48 PM
StartupList version: 1.52
Started from : C:\Program Files\StartUpList\StartupList.EXE
Detected: Windows XP SP2 (WinNT 5.01.2600)
Detected: Internet Explorer v6.00 SP2 (6.00.2900.2180)
* Using default options
==================================================

Running processes:

C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\GWHotKey.exe
C:\Program Files\MusicMatch\MusicMatch Jukebox\mmtask.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\Program Files\Logitech\MouseWare\system\em_exec.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\WINDOWS\system32\ctfmon.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\PROGRA~1\Symantec\NORTON~1\GHOSTS~2.EXE
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
C:\WINDOWS\system32\utilman.exe
C:\Program Files\StartUpList\Startu... Read more

More replies
Answer Match 40.74%

Hey. Not sure where to post this problem so I just decided to put it in with games. I use a program called DAEMON to use virtual disk drives. Wierd thing is that the first two drives do not have a letter assoicated with them (E:, F and it won't save any changes I make on the main configuration options screen that sets a letter. They've worked before, but I just noticed now that they were gone. Any solution to this baffling mystery?
 

A:DAEMON Wierd Configuration Error

Have you tried setting the number of drives to zero and then back to two?
 

2 more replies
Answer Match 40.74%

I was trying to repair a software installation (Iomegatools) by removing and reinstalling this software. My system froze after the installation and I shut down the computer and tried to restart Windows XP. On restart, I get a black screen with white type indicating I have an invalid system configuration. It suggests I run Setup to input the correct date and time. When I get past that it starts to load windows XP but freezes on a blue screen with the Windows XP logo but no User logon information. Any suggestions?

Thanks,

Jon B

A:Invalid System Configuration Error

Have you tried to start the machine in safe mode and use XP system restore yet?

7 more replies
Answer Match 40.74%

I have a COMPAQ laptop,Windows XP Home Edition
Each time I start up my computer, the following message shows up:

"You have used the System Configuration Utility to make changes to the way Windows starts. The System Configuration Utility is currently in Diagnostic or Selective Startup mode, causing this message to be displayed and the utility to run every time Windows starts. Choose the Normal Startup mode on the general tab to start Windows normally and undo the changes you made using the System Configuration Utility."

I have already checked the "Normal Startup" box but after restarting, the message pops up again.
I can't even connect to the internet, and my anti-virus doesn't detect anything bad. HELP PLEASE!!
 

A:System Configuration Utility error

9 more replies
Answer Match 40.74%

I can not get past the disk config
the error I get is: Windows could not set a partition to active on disk 0
error0x80300024
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SetupUILanguage>
                <UILanguage>en-us</UILanguage>
            </SetupUILanguage>
            <InputLocale>en-us</InputLocale>
            <SystemLocale>en-us</SystemLocale>
            <UILanguage>en-us</UILanguage>
            <UILanguageFallback>en-us</UILanguageFallback>
            <UserLocale>en-us</UserLocale>
        </component>
        <component name=&quo... Read more

More replies
Answer Match 40.74%

The last time i played sims 3 was last night. I fell asleep with it on and when i realized what happened i tried to save it and shut down. No actions could be done it was froze, so i restarted and tried to play again and got error

Error Parsing
C:\Windows\Microsoft.NET\Framework\v2.0.50727\config\machine.config

Parser returned error 0xc00ce556.

I dont know ANYTHING about computers please help!!!
 

More replies
Answer Match 40.74%

I recently booted up my Gateway notebook only to find the "blue screen of death"

I rebooted and it came up to a windows boot manager screen which says windows failed to start..insert installation disc and click repair to fix...blah blah...i'm sure you know the story...

My question is, I booted the Vista disc and when I click repair it doesn't even find the C: drive...when I try and run the BCD fix from the command prompt screen, it says it found 0 Windows installations...would this indicate a faulty hard drive?? If so, I dont mind replacing the drive, I just wanna make sure this is the issue before I spend the money to replace it...

Much thanks for any help anyone can offer!

A:Boot Configuration Data Error

I'm not sure what BCD fix you tried, but see if it is this one and if not, try this one.

To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps: (you need a Vista Installation Disk to do this)

1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
2. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
4. Click Repair your computer.
5. Click the operating system that you want to repair, and then click Next.
6. In the System Recovery Options dialog box, click Command Prompt.
7. Type Bootrec.exe, and then press ENTER.

Note If rebuilding the BCD does not resolve the startup issue, you can export and delete the BCD, and then run this option again. By doing this, you make sure that the BCD is completely rebuilt. To do this, type the following commands at the Windows RE command prompt:
 bcdedit /export C:\BCD_Backup
 c:
 cd boot
 attrib bcd -s -h -r
 ren c:\boot\bcd bcd.old
bootrec /RebuildBcd

See if that works.

If you don't have the disk (or that didn't work), try EasyBCD http://neosmart.net/dl.php?id=1 and see if that helps resolve the problem.

If that doesn't work, you probably have some type of hardware problem - but it's hard to tell. It may be as simple as the hard drive cable got disconnected a... Read more

3 more replies
Answer Match 40.74%

Received error message:
Windows Boot Manager
An error ocurred while attempting to read the boot configuration date.

The instructions are to insert the Windows disk and restart the PC, however I can't get past this screen. When I restart I end up on the same screen.

How can I get past this error screen?

Thanks.

A:Boot Configuration Error Screen

Try following these steps. an error occurred while attempting to read the boot configuration data (Vista)

5 more replies
Answer Match 40.74%

I would like to say hello to everybody here. I have a problem. My problem is the nasty dredful Code Purple Configuration Error for HP. I have been working on a HP Pavilian mini tower, and I ended up having to destructive restore it. I then restart the tower, and I get this Config Error code Purple. I don't mess with HP very much (I compac/HP) I have also did my research on the problem, and I know its got a tatoo on the mother board(haven't added any hardware, and the reason for the restore everytime I tried to logon, it would say saving settings and restart) Of course this computer hasn't came with a restore disk, its on a partition of its own. I know their was a lawsuit over HP sending restore disk, and I also know I need to put the hardrive in a different tower and delete a bin file. Here's the problem. I have been fighting with hp over this restore disk and wanting me to pay for tech support. I feel I shouldn't pay for tech support because this problem was caused by them. My question is there away to fix this easier than the other ways shown on this forum. I never have hook up a hp hard drive to a different tower(which I don't think will post any problems, but then when deleting bin files or even locating these file. I am not too comfortable with doing. Will someone either let me know a easy way to fix this or instruct me in which is the best way and the step to fix it. Sorry for acting like a dumby, but i am not trying to mess up this HP comp... Read more

A:Code Purple Configuration Error HP

I'm guessing nobody wants to touch this with a 10ft. pole. I still have the same problem with this HP, and I really don't know what will work to fix this, and if there is a way to do it easier. I have read alot about this subject, but really can't find the correct way to get this up and running. If someone could help that would be great.
 

1 more replies
Answer Match 40.74%

I am running windows XP on a laptop but it stops loading when it gets to the microsoft logo (HDD stops working rather than computer hanging - scrolling bar still scrolling but HDD light stops)

I have started up in safe mode and it says that there is a problem with the configuration of the network hardware. I have tried restoring the computer to a previous setting but this stops working when it restarts at the same period it stopped working before

Please can you provide indepth info as my computer is running in Spanish (long story) and i dont speak a whole lot of spanish!
 

A:Network Hardware configuration error

Delete the network hardware from device manager while in safe mode and reboot.
 

2 more replies
Answer Match 40.74%

M52 ( IBM Desktop)

Windows XP OS

When i start my computer... it is giving 2 beeps... n then getting
0662 configuration change error...

later cheching mac address...

how to get rid of this error...


i tried to enter in BIOS... selected restore default settings... saved n exit... but still problem is there...

any help appreciated...

Regards,

A:0662 Configuration Change Error

I work on several of these. Really bad design. Very crowded, no air circulation (heat) and underpowered (poor voltage=hard drive errors, system file corruption, etc...)
I assume you've tried this procedure:
http://www-307.ibm.com/pc/support/si...F06-D0212.html

If the settings do not "stick" I would do the following:

Reseat the RAM.
Remove CMOS battery, clear CMOS (test battery while it's out. If it's low, replace it.)
Try disconnecting all peripherals (hard drive and optical drive) and see if the problem changes or stays the same.
If you can't get the symptom to change at all, I'd try reflashing the BIOS as a last resort. The motherboard might be bad. Might be power supply. Those power supplies cost more than the whole box is worth. Is this your machine?

2 more replies
Answer Match 40.74%

My Father-in-Law brought over the computer we gave him for Christmas and said it was not working. I started it up and got this message "your system has detected a configuration error. Please report this error to customer care...blah blah" I tried a system recovery but it had no effect. I tried clearing the cmos and that had no effect either. I tried using the recovery cd's that I made for it and got a message saying the cd's were not for the correct model?!?!?! What is going on here?

PC Info:
HP Pavilion a430n
XP sp1

Any help would be appreciated, Thanks in advance

-Nate
 

A:Solved: Help with System Configuration Error

12 more replies
Answer Match 40.74%

I have a laptop that on my wireless school network would connect fine and automatically. The network is a guest network so it is unsecured. I recently had to reinstall the operating system on my laptop to fix several access rights errors and others (reinstalled Vista). After the reinstall I am having a lot of trouble accessing the internet on the school network. The network and sharing chart will occasionally show that I'm connected to the public network and it will also go all the way through to internet access but my pages wont load and I don't have connection (I use google chrome as my browser but thats not the issue).

I've tried:

-Pinging common websites, it comes back and tells me that I have entered the name wrong which is odd.
-Restarting my computer
-Restarting my laptops wireless adapter
-Checked wireless connections at my house and at other network in my computer engineering class, all of which give me full access to the internet.
-Check DNS information I get a DNS error from doing a diagnosis(this I may not have done right so more information would be great). The diagnosis says I can't connect to www.microsoft.com common dns server
-When it says I have internet and I go to a page I get a error about not being able to resolve the server
-Disabling DNS prefetching
-My own IP is pingable which is normal.
Hopefully I can get this fixed soon because several of my classes are online classes at school which will end up forcing me to do a bunch of ... Read more

A:Solved: A sort of DNS Configuration Error?

11 more replies
Answer Match 40.32%

I have done everything i possibly can that i know of using the internet (F10, F5 F8 etc), i even called and got no help except more it will cost you $60 to get a number and i asked what is the number for where? No answer Last week, the computer no longer got past the microsoft logo (note no discs of any kind came with the computer, just it the mouse and the keyboardy from Best Buy) and no there isn't extra warranty on it. Ok i did system recovery, didn't work, system restor to last point it was working didn't work. Now it has obviosuly recognized i did a recovery so it goes to the logo screen and then the white box "Configuration Number Error)" comes up. Tells me to call HP to obtain it and the story goes on. Is there any backdoor tricks to obtain the config number, or of any fixes you know.I was wondering if it was a complete hard drive fail.  Any help is grealty appreciated! Thanks,Rosemary

More replies
Answer Match 40.32%

Does anyone no how to fix this? Yesterday I got a UAC Zero Access Virus and tried using windows repair disc to go back to a restore point. That just made everything worse and now I can't boot into windows at all. I have a multiboot PC (its set to just windows 8 and windows 7 right now, windows 7 being the biggest partition on the drive).
 
Recovery
Your PC needs to be repaired
 
The boot configuration data for your pc is missing or contains errors.
 
File:\Boot\BCD
Error code: 0xc000000f
 

A:The Boot Configuration Data For Your PC Is Missing or Contains Error

Can you boot into either of the two operating systems?

15 more replies
Answer Match 40.32%

I have a Dell 8250 running XP. I haven't installed anything on my computer lately; however, when I started the computer this morning, I got 3 plug & play configuration error lines followed by the f1 or F12 option.

When I go into my device manager, both the NVIDIA Geforce 4 MX420 display adaptor and the VIA OHCI Compliant IEEE 1394 Host Controller say they cant find enough resources and are giving a code 12 error. Can anyone help me get this straightened out? Liike I said, this started out of the blue, without me installing anything new.

Thanks!
 

More replies
Answer Match 40.32%

Several times, and only from a cold boot, I get a pop-up stating "Boot Configuration Editor Has Stopped Working" However everything loads okay and functions. What might be causing this and what does it mean. IE: What function does this editor serve?

SYSTEM SPECS

INTEL I7-920 PROCESSOR
WINDOWS 7 HOME PREMIUM 64 BIT
12 GB TRI CHANNEL DDR3 SDRAM AT 1333 MHZ
ATI RADEON HD5670 1GB GDDR5
1 TB 7200 SATA 3.9 GBS 16 MB CACHE
CREATIVE SOUNDBLASTER X-FI
DELL WIRELESS KEYBOARD AND MOUS


Dave K.

A:Boot configuration data editor error win 7

Run Startup Repair on a cold boot.

More info on BCD here: http://technet.microsoft.com/en-us/l...8WS.10%29.aspx

5 more replies
Answer Match 40.32%

I recently ran out of ink on my Cannon MP830, I used my HP office jet G85 to complete a few printing operations, then I switched back to the Cannon MP830. I tried sending printing jobs to it but I get an error warning to check printer configuration. Everything looks to be correct but says 3 jobs pending. Printer status shows nothing in que. Any suggestions?

A:when I try to print error, check printer configuration comes up

Go to Devices and Printers Right click your Canon MP830 printer and make it the Default Printer

3 more replies
Answer Match 40.32%

running winxp

tried tweaking some startup stuff to cut down on what was running to help speed up my comp and deleted some unused programs,which i think must have had the dll file in it....

dunno what i did wrong as i thought i turned everything back to the way it was but im still getting this stupid error,again i am thinking the notification dll files were possibly in one of the old programs i deleted

"Notification dll
has not been registered program will not work correctly"

immediate upon bootup and starting to access my desktop i get that error

network connections is empty

i cannot drag and drop now either

i cannot access any wireless connection to get online with that laptop and download any fixes or anything

tried a few other fixes i found elsewhere,none worked and gave me this message when i tried

ethernet adapter wireless network connection 2:
media state........:media disconnected

ethernet adapter local area connection:
media state........:media disconnected

and if its relevant and helps solve it, as soon as i hit enter, i can get around on y desktop minus the toolbar,yet immediately it pops up not one but two of the same folders system32

and in the services section,it will not let me start alot of the various services that seem like they need to be running to access my wireless stuff

any help is appreciated,thanks
 

A:wireless configuration notification dll registry error

15 more replies