Tech Problem Aggregator

Copy a manifest file

Q: Copy a manifest file

Hey hey, this is my first post on this forum, so Hello.

I'm after a bit of help. My friend's laptop has a problem; Vista loads up, but gets stuck with an error message "Interactive logon process initialization has failed".

I've googled for a fix to this problem, and have had some success. I made a bootable Vista restore disc on a USB stick and have copied C:\Windows\System32\winevt\Logs\Application.evtx to view on my own laptop. I've identified a manifest file that I think I can just write over with a working version of, but I'm on Windows 7 on my laptop, so haven't got a copy of the right manifest file.

What's the best way of getting it?

The file I need is C:\Windows\WinSxS\manifests\

I would be happy for someone to email a copy of this file over to me. Seems like the quickest solution (?)


A: Copy a manifest file

Think this is it.

2 more replies
Answer Match 59.22%

The file below is corrupt and I need a replacement:
I've searched other machines I have including their cab files and cannot locate it.  Can anyone help?

More replies
Answer Match 59.22%

I am attempting to upgrade Vista Home Premuim to SP1, however it seems to be failing due to: windowsWcpStoreCorruption.

The file in question is \winsxs\manifests\x86_windowssearchengine_31bf3856ad364e35_6.0.6001.18000_none_4a1873b72f5a22088.manifest


I have no idea how to correct this particular error, so I'm hopefull that someone here can help. Thanks!

A:Corrupt WCP Store - manifest file

Hi mike,

Did you by chance customize your install DVD?


4 more replies
Answer Match 59.22%


I did SFCFIX and it said that your manifest is corrupt. the SFCFIX log is attached. I'm also linking the CBS.log

CBS.log - Google Drive

More replies
Answer Match 59.22%

I have a WHS 2011 server that cannot update. According to the checkSUR log I an missing the following file winsxs\manifests\wow64_microsoft-windows-ie-htmlrendering_31bf3856ad364e35_9.4.8112.20554_none_92a2291542613f64.manifest. Through the registry I determined the file is associated with update kb2722913. I also found evidence that the file is located in that kb on the microsoft website. When I expand the update and look for the manifest file I cannot find it. I have usedwinrar, 7-zip, and the console command to expand and view the files. In fact there are no files in the kb that start with wow64. Does anyone have any idea where I can get this manifest and get the server back up and running. I was missing 2 manifests but I was able to get one manifest out of a different kb using the tutorial on SUR in these forums. I tried to uninstall kb23722913 and that failed. I also tried to reinstall the kb and that also did not work

A:Missing manifest file in checkSUR log.

Windows Update Posting Instructions
Please post the FULL CheckSUR log - then we can post a proper fix

9 more replies
Answer Match 59.22%

Hello all, I have searched the forum and Google and not found anything on this. Whenever I use RUN, and type in msconfig, and hit enter I get the error message below. If I hit cancel it starts just fine with no apparent side effects.

Here is the error:

A problem was encountered while processing the custom tools manifest file (C:\Windows\system32\MSCFGTLC.XML). Please check the file for errors and verify that all expected tools are displayed.

The thing is, the file mentioned (MSCFGTLC.XML) doesnt exist on my system. Any help would be greatly appreciated. Thanks!

**EDIT** Btw, this is a new system, not upgraded from XP. Thanks again!

A:Custom Tools Manifest File

Anyone encountered this? I am pretty sure it is related to the install of Adobe products but I can figure out why it would cause this. Any help is appreciated.

1 more replies
Answer Match 58.38%


When I try to install Windows XP Pro onto my new computer, I get the following error:

SXS.DLL: Syntax error in manifest or policy file "D:\I386\asms\52\Policy\MSFT\Windows\Networking\RTCDLL\RTCDLL.MAN on line 0

Manifest parse Error

Invalid at the top level of the document
I thought it was the CD that was scratched but I burned the OS on a different CD and the same error occurs. I have done some testing and the hardrive is fine.

Please help.

A:Sxs.dll: Syntax Error In Manifest Of Policy File

If it is an old hard drive you may have remnants of old software. Try a "Quick Wipe" then install XP.Kill Disk

11 more replies
Answer Match 58.38%

Hi..My installation of XP Pro hits a Fatal Error and I get the Below Message ...Can anybody offer a guide to eliminating this Problem ..
Thanks M.

System Setup Log
SXS.DLL: Syntax error in manifest or policy file"C:$WIN_NT$.~LS\I386\ASMS\6000\MSFT\WINDOWS\COMMON\CONTROLS\CONTROLS.MAN on Line 4

More replies
Answer Match 58.38%

My Checksurlog indicates 1 CSI Manifest Missing and 41 CSI Payload Files Missing.
I found one instance of this manifest file on the internet but was not able to get it recognized by Windows.
Nor could I find the related KB-number.


More replies
Answer Match 58.38%

As the Microsoft W10-offer is about to run out, and as I have not been able to take them up on it due to missing files which made Microsoft roll back the upgrade, I present my problem here so to have it resolved in time.
I prefer an upgrade so I don't have to reinstall all my programs.

My Checksurlog indicates 1 CSI Manifest Missing and 41 CSI Payload Files Missing.
In the thread Windows Update Manifests - Manually Trace Through Registry the missing manifest was found to be related to a KB-number in the value > CBS_package_10_for_kb976325~31bf3856ad364e35~x86~~
In MY case what I found as the relevant value was: i!CBS_win8ip-microsoft-windows-graphics-package~31bf3856ad364e35~a_5314668a6eda86f6. NO KB-number there. So how to proceed?


A:No KB-number found; necessary for recovering manifest file

Hi Otto,
Unlikely to be able to solve the problem that quickly, i suggest you follow this tutorial

Clean Install Windows 10 Directly without having to Upgrade First - Windows 10 Forums


1 more replies
Answer Match 58.38%

I've been getting messages that say "This application has failed to start because its side-by-side configuration is incorrect" for nearly all my programs. My Internet Explorer 64bit still works, as does notepad and a handful of other applications.

I spent the past few days researching how to fix this, and have tried several things to no avail-
- sfc/ scannow in the command prompt finds a corrupted file but can't fix it
- restoring my computer to a previous point, even several weeks back, has no effect.
- restarting my computer in safe mode and then trying sfc/ scannow didn't help. in fact, now my laptop is stuck in safe mode.
- I did a virus scan with TrendMicro, but just caught some spyware and low-threat items.
- Anything I download comes up with the sidebyside error when I try and install it.

Through the event log, I have located the problem manifest file. I'm at home right now and might be able to replace the corrupted/broken one with a working file from my family's home computer. My question is if I should go ahead with the procedure and see if it will work?

Here are my specs:
Dell Studio XPS 1340
Intel Core 2 Duo Processor p8600
Windows Vista Home Premium
Service Pack 1

My home computer is the same OS as this one.

This problem happened pretty much without warning- my laptop worked fine in the morning and then later that evening the problems began occuring. I did drive with it from Lubbock to San Antonio but I doubt that would have effected t... Read more

More replies
Answer Match 57.12%

Hi, every time we start up the computor we get the messsage unable to open the file D:\ CD Manifest.dat. we have to click cancel to get past it and carry on but we cannot fix the problem can you help???

A:start up error message unable to open the file D:\CD manifest.dat

Something is trying to run a program using pointing to a CD file.

This is usually found in the Registry's RunOnce entries.

Try this:

FIRST: Right-click My Computer, select Manage, expand [+] Event Viewer, look at each log for an error entry and double-click it to see details, use info to fix.
OR: Open Regedit ([Start] menu, Run, type regedit)...
...use File, Export option, to backup your Registry...
...use Edit menu, Find, and enter RunOnce in the search field, [OK]....
...look for an entry in every RunOnce found (you may have to expand [+] the entry) and find the specific entry line that calls the file or a program that may be looking for the file and click it to select....
...delete [Del] just the erroneous entry... should use [F3] to continue search until end, to make sure the entry is not anywhere else.


1 more replies
Answer Match 56.7%

I am doing a fresh install on a machine that I have replaced the hard drive.

I am using the retail version of windows that was used on the computer from the hard drive before.

When I install windows I get through the formatting of the harddrive and the re installation. the computer then reboots and I get the screen that says it will take approx 39 minutes to reinstall windows.

It then gets up a error message and this is what the error message says

Installation Failed D:\I386\asms error Message: A component's file does not match component manifest.

Then a log error comes up that says

one of the components that windows needs to continue setup could not be installed. A component's file does not match the verification information present in the component manifest.

Where is this component manifest and how can I correct the information present?

A:Problem installing windows xp: componet file does not match companet manifest.

Interesting article. It suggests that this could be due to copyright protection.
If you have another cd drive then try swapping it out.

3 more replies
Answer Match 56.7%

OS Version: Microsoft® Windows Vista™ Business, Service Pack 2, 32bit
Processor: Intel(R) Core(TM) 2Duo CPU [email protected], x64 Family 6 Model 15 Stepping 13
Processor count: 2; Ram 2036MB;
Graphics Card: Intel(R) G33/G31 Express Chipset Family, 3320MB
Hard Drives: C: Total -150487 MB, Free -93078 MB: D: Total -2047 MB, Free -1433 MB
Motherboard: Dell Inc., OKP561; Antivirus Norton 360, Updated & Enabled
Computer: Dell Otiplex 330, x86 -based PC: Bios Version; Dell A03, 2/19/2008; SIMBIOS Version 2.5

In addition to not searching; The History of all updates is gone. Cannot find any where on the computer
There are no hidden updates to be found. NEVER checked for Updates; NEVER installed updates.
Error code 80070490 leads me to a list of 30 items; Item 16 is speciffically error code 80070490 and it tells
me my CBS Manifest file is corrupt.
Have had this computer since Sept. 2008. Was having trouble with one of Windows Updates in Aug.-Oct.
2012 not being successfuly updated. After that, things have been getting progressively worse.
Have tried several solutions: Norton 360 Has always benn enabled & kept Updated. Have tried Regservo
Program & their support to no avail & have cancelled them.
System Update Readiness Tool gets me to step 6 & UPGRADE option has been DISABLED. The other
option will destroy my Programs ,Email & Settings which I am trying to avoid.

I have been deleting Browsing Hist, Windows Cache Hist. & Office &... Read more

A:Windows cannot search for Updates; error: 80070490;corrupt CBS Manifest file

8 more replies
Answer Match 54.18%

I'm currently in the process of copying files back from the cloud in the exact same location where I had them before and now it says that the file name is too long and prompts to see whether I want to skip the file or not. The error message given does not
give the full file name or the path so it is impossible to see which files were copied successfully or not. This never happened with XP! Then afterwards I found that some of the files with long names did copy successfully whereas others didn't. I find this
to be a very user unfriendly process and I'm totally confused! These are critical files and I'm sure I haven't exceeded 260 characters or whatever. This is soOoO frustrating!!


A:file copy error message not sufficient + file name too long will not copy

Hi ,

There is a limit of filename length within Windows Explorer. In the Windows API (with some exceptions discussed in the following paragraphs), the maximum length for a path is MAX_PATH, which
is defined as 260 characters.
The shell and the file system have different requirements. It is possible to create a path with the Windows API that the shell user interface is not able to interpret properly.
This means that your long filename can only be handled at the command prompt level and you cannot drag and drop an illegal length filename within Windows Explorer.

Please simplify your folders and titles.

More information, please check the part of Maximum Path Length Limitation in the link below. Cai
TechNet Community Support

5 more replies
Answer Match 50.82%

I'm trying to copy a VHD (22g, dynamic I think...)

I tried richcopy. It says copy started, but then stops....

I saw someone mention xcopy /j, to achieve the unbuffered I/O perf. you get with richcopy...

it's running, but no indication as to how long it takes (EDIT: just finished, > 10 mins),

what's the syntax for single files?

Can't you just paste the path into the source?

(starts, and stops... any logs?)

A:how do I copy a BIG single file (using richcopy?) big file copy

Use this command if the VHD is sitting on C:

robocopy "C:\Users\yourName\VHD Folder" "S:\Storage Folder" *.* /COPY:DAT /E

Change yourname and replace VHD Folder with the name of the folder where the VHD resides. S:\Storage Folder is where you want to store it.

1 more replies
Answer Match 47.88%

Hi Techies ,

I have been looking to find a macro to help me sort out my excel file. I am new to macros so the one I am looking for has to look for a text , copy another column of that row(eg lets say E11) where text is found , find this text (E11 text) , copy another column of a row where E11 is found ( say F21 ) , find F21 and copy another coulmn of a row where F21 was found and print all these ( text , E11 , F21 etc. ) on a new sheet in a single row.

examples are all highlighted fields in the attached file.

Can someone help me with creating a macro!!! ?

A:Macro : Find > Copy > Find > Copy > Find > Copy > Print all found in File

13 more replies
Answer Match 47.46%

Hi all,

Any idea how to write Batch File .bat to copy file from File Sharing & FTP Hosting to local directory.

Current the File Sharing & FTP Hosting is SMARTFILE.

I don't want to use WINSCP as the connector.


A:Batch File .bat to copy file from File Sharing & FTP Hosting

Hi Chacha,

Give this batch file a try. All text in red, you should adjust before running.

@echo off
echo.lcd C:\Some\local\directory /Some/server/path
echo.get Some_file_to_download.txt
) > "%TEMP%\_%~n0.ftp"
ftp -s:"%TEMP%\_%~n0.ftp" ""
del "%TEMP%\_%~n0.ftp"

1 more replies
Answer Match 45.36%

I'm in the process of repair/recovery of my machine (Dell Inspiron 8500 with Windows XP Home, Service Pack 2). I'm following exactly the instructions in:, but a problem has developed. The "software" file (which is the file that the original blue screen error message says is "corrupt, absent or not writable") will not copy to the new tmp directory to create the backup. My understanding from the article is that this backup file (software.bak) will later be used to restore correct settings for various software applications. Since I can't copy it, it appears that I am screwed, no? Or is there a way out somehow?

Thanks to anyone who's been there and can help...

BTW I have the XP installation disk that came with, and a diagnostics disk which I have not yet run.


A:Blue Screen: Registry File Failure; can't copy corrupted file to tmp directory

Never mind, I had it wrong--didn't read the document referred to above carefully enough. The procedure worked like a charm, and the document is very easy to read and entertaining to boot! (pun intended).

The document describes a procedure that closely follows a Microsoft KB document (which I now can't find) but does not contain any warning regarding whether the OS is an OEM (original equipment manufacture) install or not. The Microsoft doc says not to use the procedure on an OEM-installed OS, but I just did it on my Dell, so that warning seems to be incorrect.

Many many thanks for the help provided by this document and this site.

1 more replies
Answer Match 45.36%

I cannot copy or paste jpeg files from my computer to my SD 2GB cards. Also, I get this msg when I try to print jpeg files. Using Adobe Elements I am able to archive these files. Oddly enough I can attach and send these jpeg files via email. Prior to August '08 was able to do these tasks without a problem. I suspect that there is a software compatibility problem since this problem came on suddenly (maybe iTunes?). No problems importing jpeg files from SD cards. I've looked at several sites on the internet but none seem to have the right solution for my problem. THANKS for any help that you can provide! -Stu

A:Error copying file or folder; cannot copy img the directory or file cannot be created

This has caught me more than once.

The problem is a limitation on the number of files and folders allowed in the root folder of a FAT16 file system (as for a memory card) of 512. (Note, this number is reduced much further if longer file names than 8 characters are used, as most people will want to).

When transferring the files onto the card, new files will be rejected when you hit this limit.

So keep your files in separate folders, so they are not all in the root folder.

For files and folders in root it might be worth keeping your filenames under 8 characters in length so you can use the full 512 files on root folder.

3 more replies
Answer Match 45.36%

How can I move/copy a file from one disk to another without changing the file's creation date?

A:Copy/Move File from One Disk To Another w/o Changing the File Creation Date

You can use a utility called "Set File Date" to change a file's creation date to whatever you want.

1 more replies
Answer Match 45.36%

I would like to create a .bat to copy files from source folder to destination folder.
Some files in source folder already exist in destination folder (Same name)
What I would like is that files existing in destination folder to be rename to f.eks filename_BAK.extension.
Source folder include. FileOne.asp - FileTwo.exe - FileTree.txt
Destination folder include. FileOne.asp - (NO FileTwo) - FileTree.txt
Result. FileOne.asp (version from source)(Existing renamed to FileOne_BAK.asp) - FileTwo.exe - FileTree.txt (version from source)(Existing renamed to FileTree_BAK.txt)
Now in desination folder.: FileOne.asp - FileOne_BAK.asp - FileTwo.exe - FileTree.txt - FileTree_BAK.txt
Files in source folder are placed in different folders, but in same structure in destination.

Kind regards
Søren Kromann

More replies
Answer Match 45.36%

Hi All
I have a rather large file system with lots of folders & subfolders. When I want to save previously on Xp operating system I'd search in explorer open the folder I want then copy the address (e.g c:\customer records\client name\job address).
In windows 7, when I copy the folder address i get this "search-ms:displayname=Search%20Results%20in%20electronic%20files&crumb=location:S%3A%5CSEQ%5C011_Estimating %5Celectronic%20files\CHERMSIDE , 17 smith ST"

As you can imagine I cant paste that into a save as field and expect it find the folder location.

Does someone know if it can do what I want? keeping in mind this is about time saving and productivity exercise so I need a simple solution. It is also on a work computer so a lot of settings are locked.

Appreciate any help

A:Copy file address after doing a file search in windows explorer

Find solution myself
Hold down shift right click and select "copy as path"

1 more replies
Answer Match 45.36%

When I use the XCopy command in Windows 2000, I can copy any file I like; however, when I use copy-and-paste or drag-and-drop in either Windows Explorer or PowerDesk, I get the following error:

Cannot Copy File: Cannot Read from the Source File or Disk

I searched the Microsoft Knowledge Base and came up with only one article, Q224378. This article seems not to apply to my situation because it applies to Windows 2000 Server. I am running Windows 2000 Professional with Service Pack 2. I did attempt to install the fix that article Q224378 suggested anyway; but, I got an error message that I was attempting to upgrade a program that didn't exist on my system.

I have also learned that this error applies when copying from either of my SCSI CD-ROM drives, not when copying from hard disks or floppies.

Any Suggestions?

A:[Solved] Cannot copy file: Cannot Read From the Source File or Disk

6 more replies
Answer Match 45.36%

I have Windows XP-Pro SP2 installed on a P4 1.8GHz CPU with 768MB RAM

I would like a script that opens a commamd window and calls for a file (icon file) to be copied to a specific folder on 5 different drives. I would like to be able to either paste in the file path or drag and drop the file onto the command window. The icon file will always come from the same folder "C:\WINDOWS\system32\00 ICONS\System Folders" and be copied, sometimes replacing a file with the same name, to these 5 folders:

"W:\WINDOWS\system32\00 ICONS\System Folders"

"X:\0 aAPPS\00 a Install First\00 ICONS\System Folders"

"W:\WINDOWS\system32\00 ICONS\System Folders"

"N:\0 aAPPS\00 a Install First\00 ICONS\System Folders"

"D:\0 aAPPS\00 a Install First\00 ICONS\System Folders"

I apologize if I am using incorrect terms. I don't know if a batch file could do this or if it would have to be done with vbs. I would appreciate the help. I know nothing about writng vbs script and only a little about writing batch files.
Thank you.

A:Script to call for a file then copy file to specific folders

My question was answered on a different site.

Here is the link:

1 more replies
Answer Match 45.36%

Does anyone know how to write a script that would specifically
copy a file "File.ext" to the clipboard and paste it to this
"My Script.vbs" file?

I do not mean editing the VBScript file. I currently right click
"File.ext" select "Copy" then right click "My Script.vbs" and
select "Paste".

I would like to know if I can do that with a script. I have included
an example of the code used in "My Script.vbs" I have chosen these
file names and directory paths to use as examples for my post.

I thank you for reading this.

My Script.vbs
On Error Resume Next
Const OverwriteExisting = True
Set objArgs = WScript.Arguments
Set objFSO = CreateObject("Scripting.FileSystemObject")

If objArgs.Count < 1 Then
End If

For I = 0 to objArgs.Count - 1
Arg = objArgs(I)

objFSO.CopyFile Arg, "C:\Desktop\", OverwriteExisting
objFSO.CopyFile Arg, "D:\Desktop\", OverwriteExisting
objFSO.CopyFile Arg, "E:\Desktop\", OverwriteExisting
objFSO.CopyFile Arg, "F:\Desktop\", OverwriteExisting
objFSO.CopyFile Arg, "G:\Desktop\", OverwriteExisting

objFSO.CopyFolder Arg, "C:\Desktop\", OverwriteExisting
objFSO.CopyFolder Arg, "D:\Desktop\", OverwriteExisting
objFSO.CopyFolder Arg, "E:\Desktop\", OverwriteExisting
objFSO.CopyFolder Arg, "F:\Desktop\", OverwriteExisting
objFSO.C... Read more

A:Solved: Script to copy and paste a file on to a VBScript file.

This is what worked for me:
I converted the vbs file to an exe file using ScriptCryptor.
I use a script to open the file I want copied using that exe file.

1 more replies
Answer Match 45.36%

Hi Guys,

I want to make one batch file which daily copies yesterday's files from one folder & paste it to another folder.

C:/111 folder has following files. had yesterday's date had yesterday's date had last sunday's date

now, when i will run batch file today, it only copies & & move to another folder C:/222

So C:/222 contains following had yesterday's date had yesterday's date

Please note , i have to run this batch file daily which should not require any changes.

More replies
Answer Match 45.36%

Hi all,

Please help!! I'm having a problem to copy some files from a folder.
My folder have lots of files and is there any way for me to write a batch file to copy only files according to "date modified"? For example last week files or yesterday files.

Please help!! Urgent!!!
Thank you.

A:Urgent!! Copy file by date modified using Batch File.

Take a look at XXCOPY:

2 more replies
Answer Match 44.94%

I am new to batch files and have read up a little on xcopy and robocopy. 
We currently have a folder which new builds are copied and compressed to .zip files and stuck in a  folder. Dozens of zip files are created every day
What I want to do is the following:

I want to copy the newest zip file from folder 1 to folder 2 and extract it. 

What is the simplest way to find and copy the newest zip file considering multiple zip files are created each day?

A:using a batch file i would like to copy the newest file to a new location.

Try this:
@echo off
for /F "delims=" %%a in ('dir  /b /od "d:\My Files\*.zip"') do set Youngest=%%a
xcopy /y "d:\My Files\%Youngest%" "Folder2\"

3 more replies
Answer Match 44.94%

• I have a network directory that stores photos of individuals in jpg format. There may be only 2 pics of each person, or there may be 7 pics.
• Each persons pics are stored in a randomly named directory / subdirectory. dont have any control over the original program, it's just the way it was written, does not seem to follow any logical pattern, possibly a HEX naming structure based off the date & time, who knows (I will include a sample directory tree at the end of the post).
• Included within each of these created directories, along with the pictures, is a standard text file (filename "B.TXT") which includes the date the picture was taken, the persons name, and other information.
• Each time a person comes in and their picture is taken, the program: (i) creates the random directory (ii) stores the pics (iii) creates the "B.TXT" file with the persons information (iv) generates several other program specific files that I have no need for.
• The program names each of the pictures with the exact same names, which is why they are stored in different directories, so they will not overwrite. The retention period on each individuals directory, pics and files is approximately 40 days.

MFXX0000.jpg (Forward facing)
MLXX0000.jpg (Left facing)
MRXX0000.jpg (Right facing)
STXX0000.jpg (Identifying marks picture 1)
STXX0001.jpg (Identifying marks picture 2)

• As stated above, sometimes there is only the MFXX0000.jpg and MRXX0000.jpg files,... Read more

A:vbs or bat file copy / rename based on txt file in that directory

Wow, no takers yet ? I see there has been a few lookers, but no one - just a bump on the thread to get another look

many thanks to anyone that will give me a hand

1 more replies
Answer Match 44.94%

I got an error message when trying to drag an attachment from outlook to paperport: Cannot copy file: "Cannot read from the source file or disk".
It works fine if I drag from Outlook to my desktop, then from desktop to Paperport. But it does not work from Outlook to Paperport directly.
Can anyone help? Thank you

A:Cannot copy file: cannot read from the source file or disk

Sorry, I can't answer your question directly but as an alternative can you copy and paste using Control + C and Control + V or other method?

1 more replies
Answer Match 44.94%

I have the game 'Crysis' on two backup DVD's. I had to put the installation files in a .rar and split them so I could back it up (I downloaded the game digitally from EA)

So when I insert disk 1 and try to copy 'Crysis.part1.rar' to D:/Crysis (D: is my data drive, C: is strictly the OS and maybe 2 or 3 applications installed on it) it copies most of it, but when it gets to '5 seconds remaining' it comes up with this error. It takes like 6 minutes to copy it and then it errors out when it's almost done! I've tried 3 times and the error popped up every time. The disk is spotless... I mean it looks brand new. Not even a speck of dust or any smudges at all.

Why am I getting this error?? I don't know what to do! If I can't copy it I'll have to redownload the entire 6gb installation package from EA, which will take probably 4-5 hours.

Please help!

Additional file info from within the error window:
"Can't read from the source file or disk."
Name: Crysis.part1.rar
Size: 4.37gb (4,588,544KB)
Date Modified: 11/2/2009 12:25PM

Other additional info:
I am running Windows 7 Ultimate x64
I have all the latest updates via Windows Update
There is only one account on this computer, mine, and it has full administrative privileges

A:Copy File: Can't read from the source file or disk.

6 more replies
Answer Match 44.94%

i have a .jpg file attached to an email: can i copy the .jpg file to a file/folder ? someone took a picture of me using an iphone, then he uploaded it to my email; i'm trying to make a backup copy, get it into a folder, so i can upload it to facebook; thanks

A:copy .jpg file (email attachment) to file/folder?

Save the attachment to what ever folder you want.

2 more replies
Answer Match 44.94%

since about 10 minutes, I do get the error-message, "while trying to finish a dowloald and after it reached 100% and tries to write the file on the harddrive"

cannot copy file: Cannot read from the source file or disk

Anyone any ideas what the problem could be? It;s my C drive and everything else works wihtout problems.

OS WinXP Pro


A:Cannot copy file: Cannot read from the source file or disk

What are you downloading with? Do you have any history cleaner? Like HistoryKill or Windows Washer?

2 more replies
Answer Match 44.94%

I'm currently using Richcopy to move about 4TB worth of data from our colo facility (1000 miles away) to our office. And that data also gets routed overseas first before coming back (don't ask). Needless to say, connectivity while not bad, could be better.

The small files are zooming right along, the issue is the larger files (the ones that are hundreds of MB or even several GB).

From time to time, I briefly lose network connectivity for a second or two, when that happens, the files currently being copied abort and once connectivity is restored, Richcopy just moves on to the next files. So when Richcopy advertises that it 'resumes', it seems it is talking about resuming a file copy queue, and not resuming partially copied files. Those have to start over from the beginning.

Is there a tool similar to Richcopy with the functionality I'm looking for?


A:Need a file copy recommendation with partial file resume

I'd look at some of the Download Manager choices on this list found by Google Search:

8 more replies
Answer Match 44.1%

Hi, I have a file with no extension called simply, D:\file

I want to copy this to multiple locations, eg e:\file , f:\file

sometimes there will already be an older version, so I would like it to overwrite the file.
Is this possible with a bat file?
I tried a simple copy command in a bat file, but it wouldn't copy at all.


A:BAT file to copy file to multiple locations?

Have you tried 'xcopy' with the /y flag. This should copy the files and overwrite without it prompting you.... Would this suut your needs?

5 more replies
Answer Match 44.1%

Help me make a batch file that copies a file from one computer to another computer in a network...

PC1 = Source
PC2 = Destination

I want to copy a file from PC1's Drive E: to PC2's Drive E:

A:How to copy a file from 1 pc to another pc in network using batch file

Yes I want to copy files from PC1 to PC2 over the network...

PC1's Drive E:\Online Games\Battle of Immortals\Battle of the Immortals
PC2's Drive E:\Online Games\Battle of Immortals\Battle of the Immortals

9 more replies
Answer Match 44.1%

I have a user for whom shares and permissions on the server are working just fine.
I have another user for whom something is screwed up somewhere.
I've taken a directory that is shared and I've looked up the share and permissions for both. Identical.
But do this for 3,000 files/directories in a tree, no can do.
I'd like to take all the share and privilege information for Suzie and give them to Tom.
Can do?

A:Copy shares and permissions on file x to file z? Is this possible?

What usergroups are they assigned to? Also you say you have a server? Is it a domain controller?

I would copy the usergroups that are assigned to Suzie and give them to Tom rather than editing the share permissions themselves.

Just my opinion,

3 more replies
Answer Match 43.68%

when trying to install windows updates I get this error coode 80070490 which indicates a corrupt CBS manifest.  Does anyone have an explanation on how toix this?  Thr OS came preloaded so I don't have a CD.  Thanks.

A:corrupt cbs manifest

HelloTo take a closer look at to what is going on please follow the below steps.Please follow the instructions Here to run the System Update Readiness Tool. When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:C:\Windows\Logs\CBS\CheckSUR.logC:\Windows\Logs\CBS\CheckSUR.persist.log

1 more replies
Answer Match 43.68%

I am getting the error, "A component's file does not match the verification information present in the component manifest.", when I am trying to install service pack 3 for XP. I am downloading directly from the MS update site. What is it & what do I need to do to resolve it.

More replies
Answer Match 43.68%

In the process of start up I this automatically pops up :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0">
- <dependency>
- <dependentAssembly>
? <assemblyIdentity type="win32" name="Microsoft.VC80.CRT" version="8.0.50608.0" processorArchitecture="x86" publicKeyToken="1fc8b3b9a1e18e3b" />
? </dependentAssembly>
? </dependency>
- <dependency>
- <dependentAssembly>
? <assemblyIdentity type="win32" name="Microsoft.VC80.MFC" version="8.0.50608.0" processorArchitecture="x86" publicKeyToken="1fc8b3b9a1e18e3b" />
? </dependentAssembly>
? </dependency>
? </assembly>
What is this ? I recently had been infected with the "Antimalware Doctor" virus, I believe I had gotten rid of it - now I'm not so sure, any thoughts ?


A MANIFEST file is an xml file with the same name as your executable that tells windows which versions of dependencies (dll files and such) to use with the executable.

This is a component of HP Digital Imaging Toolbox. You probably have a missing executable or a corrupted startup entry. Uninstall and reinstall all HP Printer/Scanner/Camara drivers on your computer and it should take care of it.

1 more replies
Answer Match 43.68%

Hi all
while in game " StarCraft2 "
recently "2weeks" been Freezing with Black Screen then having to force shut down ??

- <Event xmlns="">
- <System>
<Provider Name="SideBySide" />

<EventID Qualifiers="49409">35</EventID>



<TimeCreated SystemTime="2012-04-06T21:41:30.000000000Z" />




<Security />


<Level>2</Level> <Data>Sony.Mrs,processorArchitecture="AMD64",type="win32",version=""</Data>

<Data />

<Data />

<Data />

<Data />

<Data />

<Data />

<Data />

<Data />

<Data>C:\Program Files (x86)\Sony\Media Go\MediaGo.exe</Data>

<Data>C:\Program Files (x86)\Sony\Media Go\Sony.Mrs.MANIFEST</Data>


<Data />

<Data />

<Data />

<Data />

<Data />

<Data />

<Data />


not su... Read more

A:help with Sony.Mrs.Manifest

stripped down "media go" and found missiing files / updated and BlackSOD even quicker now ??? am at ma wits end ? recovery disc made dont give repair option either ? ?
i'm thinkin its a regisrty file ? dont know .

5 more replies
Answer Match 43.68%

I have trouble with a previous installed application for some "manifest"-files were not remouved. with my administratoraccount i dont have acess to these files and so i cant remouve or alter them. is there a way to give myself acess or erase them without working them trought one by one?

thanks a lot

A:manifest files

Hi thomas82 and welcome,

You can try to take ownership and see if that helps.

Take Ownership of file - Vista Forums

Take Ownership Shortcut

2 more replies
Answer Match 43.68%

I am trying to figure out what has been done to this PC.

Windows XP was recently re-installed, but I don't know what else was done.

When I look in program files, I see many of the programs, such as ghost.exe have been changed
to programname.exe.manifest (e.g. ghost.exe.programname)

What product did this???


please provide a bit more info on your problem. have you tried scanning your computer for any viruses and spyware? if not then i recommend you scan your computer with spybot and adware SE version. a good anti-virus program to scan your computer with is AVG. all three programs can be downloaded at

2 more replies
Answer Match 43.68%

My C drive is nearly empty, so I downloaded TreeSize, which says that my "Manifest Cache" is huge, taking up 90% of the space. I haven't been able to download service pack 1 for this computer--an error always happen--and I think that has something to do with the problem. I can't even try to download it manually now, since I don't have enough space. What is this Manifest Cache? How do I fix this?

A:Manifest Cache

YOu do not want to remove the manifest. Here is an explanation
Although it can be deleted, I would not try before using some of the methods shown below to solve the problem.

Download and run Ccleaner, do not check any registry entries, and a lot of space will be made available.

This will also make space available

To make sure that the problems are not caused by outside malware
Run a full anti virus scan
Download and run a full and updated scan with malwarebytes.

You may, also, want to unistall programs that are no longer in use.

What is the error number, when you try to download?

3 more replies
Answer Match 43.26%

Made a new thread since the old one was getting old. Old Thread.

I cant belive it!

Bought a NEW mother AGAIN. Intel this time. starting from ground with a new harddisk. When im trying to install i get a error


SXS.DLL: syntax error in manifest or policy file "D:\I386\asms\1000\msft\windows\gdiplus\" on line 4

installation failed:\i386\asms. error message: incorrect function


Great, i've bought a new Windows Pro cd, same results, changed HD, same same. The Motherboard is just 1 day old. Tried 2 different CPU, Tried different grapic card, and thats everything thats connected besides keyboard and mouse!

I've been trying to fix my computer for well over 3 months now without success. changed every part in the computer several times. Im getting REALLY sick at this now.

A:SXS.DLL: syntax error in manifest.

9 more replies
Answer Match 43.26%

Trying to upgrade XP to 7- issues along the way, but now boots under WIN7, have applied several rounds of updates, including SP1. Have some updates that won't apply, getting BSODs and lock ups. Have run SCF, no issues; Have run diskchk, no issues; Have run memtest, no issues; Have run CheckSUR - there's 16 manifests all zeros (listed below); Have looked on WIN7 upgrade DVD, the WINDOWS dir, and another system (but its a 64bit OS..) and can't find these manifests.

Any ideas ?

thx (in advance)


Binary Version 6.1.7601.21645
Package Version 15.0
2012-09-16 23:52

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
(f) CSI Manifest All Zeros 0x00000000 winsxs\Manifests\msil_windowsbase_31bf3856ad364e35_6.1.7600.16542_none_971d833490d96bac.manifest msil_windowsbase_31bf3856ad364e35_6.1.7600.16542_none_971d833490d96bac
(f) CSI Manifest All Zeros 0x00000000 winsxs\Manifests\x86_wpf-presentationframework_31bf3856ad364e35_6.1.7600.20658_none_6f09c362d04c8f64.manifest x86_wpf-presentationframework_31bf3856ad364e35_6.1.7600.20658_none_6f09c362d04c8f64
(f) CSI Manifest All Zeros 0x00000000 winsxs\Manifests\x86_presentationcore_31bf3856ad364e35_6.1.7600.16542_none_ac2fab00f12a1d72.manifest x86_presentationcore_31bf3856ad364e35_6.1.7600.16542_none_ac2fab00f12a1d72
(f) CSI Manifest All Ze... Read more

A:CSI Manifest All Zeros - where to find them?


In order to completely troubleshoot Windows validation & activation issues, please perform the following:

1. Download and save this tool to your desktop:

2. Run the tool, and then click 'Copy' - ignore any errors if they appear

3. Use CTRL+V to paste the unedited results of the validation tool here in your next reply

More info here: Windows Genuine and Activation Issue Posting Instructions


9 more replies
Answer Match 43.26%


I have a corrupt manifest. I see that people come here with the same problem and a helpful poster gives out the needed files to fix it.
Seconds executed: 2355
Found 901 errors
CSI Manifest Failed Catalog Check Total count: 5
CSI Missing Deployment Key Total count: 15
CSI Missing Identity Total count: 6
CSI Mismatched Identity Total count: 2
CSI C Mark Deployment Not Marked Total count: 862
CSI C Mark Deployment Missing Total count: 9
CBS MUM Corrupt Total count: 1
CSI Missing Winning Component Key Total count: 1

Unavailable repair files:

More replies
Answer Match 43.26%

What in the heck is this and how do I fix it?

A:Manifest Parse Error

Only time I have seen this was with a bad ISO burn of a selfbooting CD.

If this describes you, then try some different burning software.

1 more replies
Answer Match 42.84%

Hi, I have been having problems with installing updates to my windows 7 system. According to the CheckSUR log file I am missing the following manifest files:


I have attached the entire CheckSUR log (and the persist log as well)

Any ideas where I can get the missing manifest files?


A:Missing manifest files in the CheckSUR log

There's more problems than just the missing manifests!

Checking Component Store
(f) CSI Payload File Missing 0x00000000 usbccgp.sys amd64_usb.inf_31bf3856ad364e35_6.1.7601.17586_none_28d4bd852548d3f5
(f) CSI Payload File Missing 0x00000000 usbohci.sys amd64_usbport.inf_31bf3856ad364e35_6.1.7601.17586_none_1b9eb6021a6421dc
(f) CSI Payload File Missing 0x00000000 usbuhci.sys amd64_usbport.inf_31bf3856ad364e35_6.1.7601.17586_none_1b9eb6021a6421dc
(f) CSI Payload File Missing 0x00000000 usbd.sys amd64_usbport.inf_31bf3856ad364e35_6.1.7601.17586_none_1b9eb6021a6421dc
(f) CSI Manifest Failed Catalog Check 0x00000000 winsxs\Manifests\amd64_microsoft-windows-ie-htmlrendering_31bf3856ad364e35_10.2.9200.16438_none_9127dcee9294c9ac.manifest amd64_microsoft-windows-ie-htmlrendering_31bf3856ad364e35_10.2.9200.16438_none_9127dcee9294c9ac
(f) CSI Manifest Failed Catalog Check 0x00000000 winsxs\Manifests\amd64_microsoft-windows-ie-htmlrendering_31bf3856ad364e35_10.2.9200.16439_none_9127c6269294e34d.manifest amd64_microsoft-windows-ie-htmlrendering_31bf3856ad364e35_10.2.9200.16439_none_9127c6269294e34d
(f) CSI Manifest Failed Catalog Check 0x00000000 winsxs\Manifests\wow64_microsoft-windows-ie-htmlrendering_31bf3856ad364e35_10.2.9200.16439_none_9b7c7078c6f5a548.manifest wow64_microsoft-windows-ie-htmlrendering_31bf3856ad364e35_10.2.9200.16439_none_9b7c7078c6f5a548
(f) CSI Payload File Missing 0x00000000 usbohci.sys amd64_usbport.inf_31bf3856ad364e35_6.1.7601.21692_none_1c19... Read more

5 more replies
Answer Match 42.84%

Well, I was pointlessly and randomly looking through my system32 folder, and I noticed a file that was hidden (I have it so I view hidden folders, so it kinda stood out from the others), and I noticed the last part of its name was .manifest. I don't think any of the .manifest files I've found have been activated, because my computer is still alive and moveing normally-ish, but here's a list of the 7 manifest files I have found:cdplayer.exe.manifestlogonui.exe.manifestncpa.cpl.manifestnwc.cpl.manifestsapi.cpl.manifestwindowslogon.manifestwuaucpl.cpl.manifestI skimmed this thread here, but it said something about restarting your computer will make the fix not work, as the files would have changed, so I do not believe it would work good for me. I'm on Windows XP home, 2002 edition, on a Compaq computer (original OS for the computer). And, of course, SP2 updated. Files Are In My System32 Folder.

OK, these are valid Windows files. There are 2 ways to confirm this for you.It will have the same icon as .dll files hope that clears it up for you.--------------------------------------------------------------------------------Application ManifestsAn application manifest is an XML file that describes and identifies the shared and private side-by-side assemblies that an application should bind to at run time. These should be the same assembly versions that were used to test the application. Application manifests may also describe metadata for files that are private to the application.

2 more replies
Answer Match 42.84%

Hey guys, long time reader but first time poster.

Always had SP1 fail to install, so this weekend i decided to look into a bit more and try and sort it.
Ran SFC and got the following error

2011-11-12 17:06:32, Info CSI 00000314 [SR] Cannot verify component files for Microsoft-Windows-Font-TrueType-Narkisim, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral, manifest is damaged (TRUE)

I have tried uninstalling the the font mentioned and reinstalling from my installation disc, i have ran a disk scan and a virus check but it keeps showing up??
The other odd thing is i'm running an Intel Core 2 Quad Q6600 not AMD??

Have you guys got any suggestions?

A:Error installing SP1 - SFC says manifest is damaged

Hello ljphil78,

* System Restore - Should you wish to go back in time when everything was running smoothly you can return your computer to a prior working state by choosing an appropriate earlier System Restore Point.
One thing that you should know is that a System Restore Point only can affect system (Windows) and programs files, but not your actual data (music, documents, images, etc.)

* Repair Install

1 more replies
Answer Match 42.84%

Hello forum.

I just got a new computer a few days ago, and just began updates. However, the two updates that I can't complete for ___ error is the Windows Service Pack 1 update and the security update for windows 7 for x64 - based systems.

The errors I continually get (I've pressed try again at least 20 times) are two errors: Windows help says that a file is corrupted, or something along those lines.

Do forgive me, but I don't remember the exact file name, but I downloaded the ~300 Mb file off of the Windows 7 help site, which scans your computer or something, and eventually you have to check the SUR file....

Here's the log.

Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 12.0
2011-08-06 23:40

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
(f) CSI Manifest All Zeros 0x00000000 winsxs\Manifests\amd64_microsoft-windows-smbserver-v2_31bf3856ad364e35_6.1.7600.20956_none_368ca16d2931117e.manifest amd64_microsoft-windows-smbserver-v2_31bf3856ad364e35_6.1.7600.20956_none_368ca16d2931117e
(f) CSI Manifest All Zeros 0x00000000 winsxs\Manifests\amd64_microsoft-windows-smbserver-v1_31bf3856ad364e35_6.1.7601.21717_none_38aa0e59262e0b0c.manifest amd64_microsoft-windows-smbserver-v1_31bf3856ad364e35_6.1.7601.21717_none_38aa0e59262e0b0c
(f) CSI Manifest ... Read more

A:Service Pack 1 Help, CSI Manifest thing?

Win 7 SP1 Issues.

*Have you checked in Event Viewer?
Type eventvwr in search.
Go to the windows log > application > in the left hand column note anything that relates to the problem.
Please note the event ID, and the source codes and tell us what they are.
* Read through the links below to see if they are of help.

Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 (KB947821) [May 2011]

Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2011]

Steps to follow before you install Windows 7 Service Pack 1 from the Microsoft Download Center

ISC Diary | Windows 7 / 2008 R2 Service Pack 1 Problems

3 more replies
Answer Match 42.84%

Hi Noel and members,

This appears to be an older thread, but I hope this still gets to people - I've been trying to fix the errors shown in the CheckSUR log. I have not been able to find the files listed on any other system. Does anyone happen to have these files?

I downloaded the update, but Windows says it is already installed. Oddly enough, it's not in the list of installed updates. I think the best approach would be the one Noel outlined - however, I would need to be able to find the files. That seems to be the issue. Thanks for everyone's help!

- Gordon

Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2015-08-24 07:16

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F080D servicing\Packages\Package_for_KB2345886~31bf3856ad364e35~amd64~~ Line 1: </a> <a href="../GettingStarted/Ch_3_PreCreatedResources/Sample_

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
(f) CSI Manifest Failed Catalog Check 0x00000000 winsxs\Manifests\amd64_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_57c30dee1646d550.manifest amd64_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_57c30dee1646d550
(f) CSI Manifest Failed Catalog Check 0x00000000 winsxs\Manifests\amd64_0f7a1a89936e7d82f67529... Read more

More replies
Answer Match 42.42%

Whenever I try to drag and drop files from one of my music folders to my "removable disk" (mini mp3 player), i get this error message: Cannot copy >file<: cannot find the specified file. Make sure you specify the correct path and file name. This used to I have no idea what is going on with it. Could someone give me a heads up as to what the crap is going on?
Thank you!


A:Cannot copy >file<: cannot find the specified file...

Have the names of any of the files been changed?

1 more replies
Answer Match 42.42%

Hi. I'm getting errors when trying to do a Windows update to service pack 1 (Windows 7).

I've run CheckSUR, and it seems to be complaining about:


I've attached a zip file with both the checksur.log and the cbs.log.

I've tried looking in my Windows7 DVD for the file (ie. viewing the "D:\sources\install.wim\2\Windows\winsxs\" archive using 7zip). But that file doesn't exist there.

I'm out of ideas what to try next.

Thank you for any help with this,

A:Win7 update errors (CSI Manifest All Zeros)

Give this a quick shot.
SFC /SCANNOW Command - System File Checker

4 more replies
Answer Match 42.42%

I have been reading and Microsoft doesn't sound as effective nor even virus free.
Im looking for free anti-virus which ALL its function are enabled and same with a firewall.
I have a security problem and wonder how I can privately ask you for information on it.
You have most helpful forum.

A:Missing wuaucpl.cpl.manifest. Are Updates really important

Consensus opinion here seems to indicate AVG Free is a very good anti-virus program and Sygate a compatible firewall. See the list of 'freeware replacements for common programs' here for other choices (also contains download links): Also have a look in the Tutorials section for ways to keep your system secure on the internet. is essential to have Anti-Spyware: minimum requirement is AdawareSE, SpyBot S&D, and SpywareBlaster. Others may say you need even more. They compliment one another it doesn't matter how many you have. how I can privately ask you for informationYou could PM the site Admin. (just remember to call him 'sir' )Good Luck

1 more replies
Answer Match 42.42%

I did a routine 'sfc/scannow' in an admin window.

Then I filtered to get the relevant are the only 2 NON-successful lines:

2016-05-10 08:09:18, Info CSI 00002b2f [SR] Cannot verify component files for Microsoft-Windows-User-PnpEvents, version 10.0.10586.0, arch amd64, nonSxS, pkt {l:8 b:31bf3856ad364e35}, manifest is damaged (TRUE)

2016-05-10 08:18:37, Info CSI 00005402 [SR] Cannot verify component files for Microsoft-Windows-User-PnpEvents, version 10.0.10586.0, arch amd64, nonSxS, pkt {l:8 b:31bf3856ad364e35}, manifest is damaged (TRUE)

and at the end, the log says:

2016-05-10 08:18:41, Info CSI 0000540d [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction have been successfully repaired

So, are these 'manifest damaged' entries something to worry about?

More replies
Answer Match 42.42%

I have failed to update my OS to Windows 7 SP1 several times. After running the Readiness Tool, KB947821 it says one of CSI manifest file has zero length and I don't know what to do to fix it. Please help. Thanks.

More replies
Answer Match 42.42%

Found a virus running on my system. Some sort of manifest.json javascript based virus. Manuallly removed it to the best of my ability. I don't know what it was, so I posted in the other forum to try to get help with that. See this post for more details on what I found and did. 
My system seems to be normal... but I am wondering if I am actually clean now.
DDS (Ver_2012-11-20.01) - NTFS_x86
Internet Explorer: 9.0.8112.16584  BrowserJavaVersion: 11.25.2
Run by bss at 1:53:38 on 2014-11-20
Microsoft® Windows Vista™ Home Premium   6.0.6002.2.1252.1.1033.18.3581.2727 [GMT -5:00]
AV: avast! Antivirus *Enabled/Updated* {17AD7D40-BA12-9C46-7131-94903A54AD8B}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: avast! Antivirus *Enabled/Updated* {ACCC9CA4-9C28-93C8-4B81-AFE241D3E736}
============== Running Processes ================
C:\Program Files\AVAST Software\Avast\AvastSvc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\Program Files\TOSHIBA\Power Saver\TosCoSrv.exe
C:\Program Files\AVAST Softwa... Read more

A:manifest.json based virus - am I clean now?

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

21 more replies
Answer Match 42%

How can I work around the following rror message "cannot copy file. cannot read source file or disk". I'm using Windows XP on a Gateway GT 4016

A:error message "cannot copy file. cannot read source file or disk"

Get a new disk or provide a whole lot more details about what you're trying to do and what program(s) you are trying to do "it" with.

1 more replies
Answer Match 42%

Hi everyone,
I have gotten this bizare trojan that will not got away, I have formated windows completaly 3 times but I notice that the folder X: Boot is always in the options if I try to load drivers to the Hard drive before installing windows. There are SVhosts running ate over 100,000 K and all my processes are high. I see changes in the screen sometimes, like flashes and the mouse moves a little. I have a multiple TCP connections listening, and other ports which I have closed, like Interface toredo and InaSat.. Before I formated the first time, the program or person created users to block my files but I managed to recover them and also some logs that were left there, I will post just one now unless I get asked to post others.. I am aware that I have been recorded since there was a program called Recorded TV which was saving to a temp root folder and I believe the output site is the one in the log. I really dont know what else to do, I have formated 3 times, used adaware, avg, spybot, tried deleting manually, but so many services and processes come up and suddenly when I almost done it shuts off my laptop. All files are saved under windows names. Help! Well I dont know how but he has deleted the best log I had which said the name of it was Manifest something, I researched it but it says it was created in 2002, this is way more advance.. and the website it was rooting to.
Follows DDS Log:
DDS (Ver_2012-11-20.01) - NTFS_AMD64 
Internet Explorer: 8.0.... Read more

A:Trojan creates users / rootkits / drivers / Manifest might be the name

Hello and welcome to BleepingComputer! 
I am Elle and I will be helping you out with your problem. Firstly, you should know that we are working with specific tools which are used to identify the possible threats present on your system so I will analyze the results they produce. 
As a start we need to have some more up-to-date logs than the ones you have already provided. The current state of the files on your system might have changed so we need to get a clear look on that aspect. DO NOT bring any changes to the system except the ones I tell you to as that may produce more damage than helping us. 
If you will encounter a delay of over 2 days from me, please don't hesitate and private message me (link in the signature). 
Do not forget to check your topic periodically and subscribe to it so that you can receive notifications regarding my replies.
Please generate other DDS logs (download it from here if you haven't already) and post them in your next reply along with other changes that may have occured since you last posted.
Also download and run GMER from this link: GMER download link.
Thank you very much for your patience. 

21 more replies
Answer Match 42%

I working on a client's machine attempting to install SP1.

As per the attached CheckSUR log - two manifest files are empty and I get the error msg - CSI Manifest Zero Length.

There is a third manifest with a similar name - see attached png for list. The 16385 file is good - 16597 and 20717 are empty.

Here are the contents of the 16385:

<?xml version="1.0" encoding="UTF-8"?>
<assembly xmlns="urn:schemas-microsoft-com:asm.v3" manifestVersion="1.0" description=".NET Framework component" displayName=".NET Framework mscorlib.Resources" copyright="Copyright (c) Microsoft Corporation. All Rights Reserved." isolated="false">
<assemblyIdentity name="mscorlib.Resources" version="6.1.7600.16385" processorArchitecture="msil" language="en-us" publicKeyToken="b77a5c561934e089" />

I cloned the 16385 twice changing the version number to match that of the other two files (16597 & 20717) and put the new files in the C:/windows/temp/checksur/winsxs/Manifests folder but then I got the error "CSI Located Replacement: Invalid (Catalog)" error in the Checksum log.

After running Checksum SP1 install fails with the error code 80073712.

In looking at other posts I'm hoping that someone can provide me with accurate versions of my two empty manifest files.

Thanks so much in advance! This is driving me crazy!!!

A:Win 7 SP1 Update Fail (80073712) - 2 Empty Manifest Files

Hello again

I've uploaded a file - - to my SkyDrive at Noel's SkyDrive
Please download and save it.
Right-click on the downloaded file, and select Extract all…
Extract to the default location - which will create a new folder ptbaa in the same place.
Open this folder - there should be one folder inside it (Manifests)

Copy the content of the manifests folder (.manifest files) into this folder:


Now run the CheckSUR tool again (it may take a while)

Post the new CheckSUR.log file, and the CheckSUR.persist.log file.

6 more replies
Answer Match 42%

There are alot of strange files in my system32 folder that end in .manifest. I don't know what it is but my computer is running slow. Every once in a while I heard this noise on my computer that sounds like something scraping. I'm worried that maybe I'm hacked. I remember reading about how you can sometimes hear noises on your computer when your hacked. These noises have no reason to be occuring and they just started recently. Any help would be greatly appreciated. Here is my hijack this log.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 7:16:20 AM, on 10/14/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16544)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\Ati2evxx.exeC:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Intel\IntelDH\CCU\CCU_TrayIcon.exeC:\Program Files\Grisoft\AVG Anti-Spyware 7.5\avgas.exeC:\Program Files\F-Secure Internet Security\Common\FSM32... Read more

A:Seeing A Lot Of Strange Things... Computer Slow... What Is The .manifest Files?

Hi KaytiC,

If you still need help please post a fresh HijackThis log and I'll be happy to look at it for you.

Thanks for your patience.

3 more replies
Answer Match 42%

Hi there,

Been having some issues with Windows Update, especially when it comes to trying to install SP1 (64 bit) on my Windows 7 Ultimate x64 machine. I've downloaded the latest (Aug. 2011) System Update Readiness tool, which has shown be that two manifests are corrupted and showing all zeros.

I've tried typical things such as resetting Windows Update, etc. however nothing has fixed it so far. I have a few friends in the house (shared student house) also on Windows 7, so thought about copying the files off their machine and replacing the corrupted ones on mine, however the files were non-existent on their machines.

Here is a copy of the CheckSUR.log file:

Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 13.0
2011-10-05 16:26

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
(f) CSI Manifest All Zeros 0x00000000 winsxs\Manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7600.20935_en-us_4fdd65da8f1fc992.manifest msil_mscorlib.resources_b77a5c561934e089_6.1.7600.20935_en-us_4fdd65da8f1fc992
(f) CSI Manifest All Zeros 0x00000000 winsxs\Manifests\msil_mscorlib.resources_b77a5c561934e089_6.1.7600.16789_en-us_66afb31075744e72.manifest msil_mscorlib.resources_b77a5c561934e089_6.1.7600.16789_en-us_66afb31075744e72

Seconds executed: 343
Found 2 errors
CSI Manifes... Read more

A:Windows Update - CSI Manifest All Zeros, msil_corlib.resources

Done a repair install/upgrade which sorted the issue.

1 more replies
Answer Match 42%

Hi all,

My ultimate goal is to install the Windows 7 Platform update which right now fails.

SFC /scannow reports corrupt files unable to fix.
WindowsUpdateDiagnostic tool, it reports Update error 80073712 as not fixed.
I also run the system upgrade readiness tool.

The logs indicate a problem with the XPS files (which can't be repaired due to missing manifests). Disabling XPS in 'Turn Windows Feature On/Off' has not helped.

I have attached the CBS and CheckSUR logs. Hoping somebody can help - how do I repair files when I don't have the repair files/manifests??

A:Update error 80073712 / missing XPS manifest files

Hi Uwajimaya,

You will need to run these steps to fix the issue:

Close all programs, and then restart your computer.
Insert the Windows DVD into the computer's disk drive. Wait for Setup to start. If Setup doesn't start automatically, follow these steps:
Click Start, and then type Drive:\setup.exe in the search box, where Drive is the letter of your computer's DVD drive (for example, D:\setup.exe).
In the Programs list, click Setup.exe.

Click Install Now.
Click Go online to obtain the latest updates for installation (recommended).
If you're asked for it, type the Windows Product key.
In the Which kind of installation do you want? window, click Upgrade.
When the installation is complete, restart your computer, and then run Windows Update.
Cheers and hope this helps!

2 more replies
Answer Match 41.58%

I have a question  that how to copy file from remote desktop user drive to my local machine using  xcopy or any other protocol.

This is my server path "\\Trail01" and here is the file location "c:\Users\ashique.sheikh\Desktop\Day2.R"
How can i give this is in my batch file. I have used this
net use "\\Trail01" "[email protected]" "/USER:ashique.sheikh"
XCOPY /Y \\Trail01\c:\users\ashique.sheikh\Desktop\Day2.R  "D:\VMI"
But its not working. It is give path error.
How can i download this or is there any other way to do it?

More replies
Answer Match 41.16%

Hello! I've been dealing with this issue for the last 2 weeks and I tried just about everything to no avail. While I was at it, I came across these forums many times and seen members get awesome help so I decide it was time to put my pride aside and ask for help too.
I'm attaching the logs as requested and hopefully you can help me, thanks in advance.

More replies
Answer Match 41.16%

I have several time tried to install SP1 on my home computer (os Windows 7 home premium 64 bit) but keep receiving the same error - I also have run multiple hotfixes and the system update readiness tool (checksur.exe) which seems to indicate that I have 8 problematic files - I have seen several similar posts here and thought I would try as well - my CheckSUR.log is attached.

Any assistance will be very greatly appreciated.

Have a good day.

A:Service pack 1 error 0x800b0100 - corrupt .mum .manifest .cat files

Hi mark

Please use the easy system specs link in my signature to update your profile information here on 7 forums. It saves a lot of typing and a lot of questions for information later on.

A Speccy report is also very useful - please PUBISH snapshot from the speccy file menu after is is done analysing and then post the URL in a new post. Thanks

edit: Put SPECCY in the title of the post so people can easily find it

Your checksur is missing a few important items, we'll see what can be done.


9 more replies
Answer Match 41.16%

Checking System Update Readiness.

(p) CSI Manifest Corrupt amd64_4b569b1694e7a6f4a6dea2d58799e1c2_31bf3856ad364e35_7.8.9200.16924_none_143378921ba37480
(p) CSI Manifest Corrupt amd64_5d1b8ac2c9381303a8ff4d68a911cff8_31bf3856ad364e35_7.8.9200.21047_none_846490a06e014181 

Have run from "Command Prompt" and through "Windows Powershell" with identical results - "source files could not be found".

Spent all day trying to update Windows 8 to 8.1 to upgrade to Windows 10. So far have not been able to do anything. Have run troubleshooter, tells me it fixed 2 files but same error messages repeatedly.

(1) error 14098 
the component store has been corrupted

(2) windows resource protection did not find any integrity violations

(3) error 0x800f0906
source files could not be downloaded

(4) windows resource protection did not find any integrity violations 

Have downloaded and run the stand alone Windows Update troubleshooter program to no avail. It continues to repair the same issues, but still results
in the same errors.

Also attempted to install - Windows8-RT-KB2937636-x64/ "Update for Windows (KB2937636)" resulted in "failed to install".

More replies
Answer Match 41.16%

Checking System Update Readiness.

(p) CSI Manifest Corruptamd64_4b569b1694e7a6f4a6dea2d58799e1c2_31bf3856ad364e35_7.8.9200.16924_none_143378921ba37480
(p) CSI Manifest Corruptamd64_5d1b8ac2c9381303a8ff4d68a911cff8_31bf3856ad364e35_7.8.9200.21047_none_846490a06e014181 

Have run from "Command Prompt" and through "Windows Powershell" with identical results - "source files could not be found".

Spent all day trying to update Windows 8 to 8.1 to upgrade to Windows 10. So far have not been able to do anything. Have run troubleshooter, tells me it fixed 2 files but same error messages repeatedly.

More replies
Answer Match 41.16% i am trying to copy a dll file
and this messege appears:
you need permmission to perform this action
you require permission from everyone to make changes to this file

trying again wont help obviously ...
i have windows 10 installed

i ve been searching online for hours about taking ownership and other staff
the thing is that i am really amateur with computer (know only basic staff)
so if someone could help providing me an easy to follow solution i would be more than thankfull

More replies
Answer Match 41.16%

hi guys, i have a dvd which is in a udf file format (on exploring the properties of it, it has 2 folders- an audio folder and a video folder ).
i was wondering what program i need to use in order to copy it to a dvd-r ?
does magiciso do the trick.....if so how ?
the gooner.

A:udf file copy ?....

11 more replies
Answer Match 41.16%

I am new to C++. I have coded in Java and understand the basics of C++. I was wondering if there was any way to write a program that will copy one line of text from a text file to paste it into a text box on a different window. Any help would be nice.

A:C++ Copy from File

6 more replies
Answer Match 41.16%

I have a licensed copy of XP running in XP Mode on a Win 7 Pro machine. I have seen instructions on the net for getting Hyper V up and running where I can create a new XP Mode VHD file, but, I would like to copy my own file from my Win 7 Pro machine (because it contains the key XP software that I want to keep running for another year or two).

Replacing that old software should probably be Plan "A" but it's only Plan "B" at this point (or possibly Plan "C").

Bruce Cavenaile
Keremeos, BC

A:Copy a VHD file from Win 7 Pro to Win 10 Pro?

See if this post on TenForms helps

0 more replies
Answer Match 41.16%

I am trying to install Arcsoft Greeting Card Creator. When I am set to install it, it gives me an error message, "System Error" "The Win 16 Subsystem was unable to enter protected mode DOSX.EXE must be present in your AUTOEXEC.NT and present in your path" I googled this and gave me a help topic with microsoft. have found that I am missing the rasapi16.dll and mapi.dll how do I copy it from my CD to my System folder. Please use steps as I am very new to this, but I am catching on quick. Thank you very much for any assistance you can provide.

A:How To Copy A File

You can download the file here.rasapi16.dllmapi.dll

1 more replies
Answer Match 41.16%

i have a .jpg file attached to an email: can i copy the .jpg file to a file/folder ? someone took a picture of me using an iphone, then he uploaded it to my email; i'm trying to make a backup copy, get it into a folder, so i can upload it to facebook; thanks

A:Copy .jpg file ?

Yes. Open it and save it. Or, depending on what you're using for e-mail, right-click it and Save As.

1 more replies
Answer Match 41.16%

i think my windows and hdd are going to crash soon. i want to back up my files. but i could not. i could not copy the files as they are taking a awful lot of time. and sometimes it just stops copying and my pc freezes. what can i do?
I am using windows 7.

A:cannot copy file

Go here to download Ubuntu 10.04 ( There is a newer version, but I am going by my existing setup, so follow along and choose 10.04 ) Save the iso file.

Then download ImgBurn from here:

Install ImgBurn and run it.

Choose "Write Image to Disc"

At the top of the Imgburn window, where it says "Source" click on the folder with maginfying glass icon; Then navigate to where you saved the ISO file.

Then click on the bottom area of the window depicting hd write to CD.

That should create the CD.

Now you want to boot with the CD on your PC. Check your BIOS so that it chooses to boot using the CD first. You are looking for the Boot menu, boot priority, or something along that line.

Once you boot into Ubuntu, pull down the Places pull down menu. Choose the ## GB Filesystem. That would be your hard drive. You will be able to see all folders in your drive. Now copy off the files you want to a USB memory stick.

3 more replies
Answer Match 41.16%

I have some computers in LAN, lets say computer A, B, C, and D. we assume my computer is A. I try to copy and paste a file to computer B via LAN. But it does not work. Can anyone explain how to do it?? I dont wanna copy/paste by sharing. Thanks.

A:Copy file via LAN

6 more replies
Answer Match 41.16%


I recently bought a Lexar 4 GB jump drive intending to use it as a backup for a documents folder with 3 GB of data.

When I try to copy the folder, the copying starts but a second or two later I get a message "Error Copying File or Folder---Cannot Copy File".

A Lexar technician went through various operations and tests (including reformatting) with me and his conclusion is that one or more of the files is/are corrupted. (We tried to copy the folder to my C drive and got the same error message.)

There are a lot of sub-folders and I suppose I could go through one by one and find which ones won't copy but is there a simpler way of locating the file(s) that are corrupted and correcting them?

Thanks so much!

A:Cannot copy file

Well, I don't know about a "much simpler way", but you don't have to go thru one by one. Basically, you can select half of the folders >copy and paste > if it goes thru fine, then it's not in that half.

So you're left with the "other" half, just select half of that...well, you get the picture.

That's basically what I did when I was trying to locate a corrupted video file. It didn't take too long.

2 more replies
Answer Match 41.16%

I have run into a few files lately that just won't move
from one place to another. It doesnt matter wether its from one drive to another, NTFS to fat32 or the other way
around, from usb to ide, ide to usb, etc, it just won't
allow the file to be copied. Makes me wonder how I got the file in the first place. I tried zipping the file using
winrar and that failed. I'm running win xp pro with sp1.
I also tried closing zone alarm and my avirus prog, still
no go.

Can anyone help me with info on how to move this file?
Not only that but i find its always a problem when moving a bunch of progs\files from one place to another. One or 2 files wont copy over. Sometimes a reboot will fix the problem, other times it won't.

I always check and make sure the files aren't "read only" so that isn't the issue. I am really getting frustrated with this problem and would appreciate any help.

Thank you

A:Can't copy file

Try it in safe mode.

2 more replies
Answer Match 41.16%

Hi All,
I have 2 m/c, say m/c A and m/c B.
I took RDP of m/c B from m/c A.
everything is working fine. now I want to copy some files from m/c A to m/c B.
I am not able to do that because RDP session.
How can i do that.
Another point is that that 2 m/c are not in the same network.
Please help

A:Copy file using RDP

both m/c are having win Xp OS and i took RDP via VPN

1 more replies
Answer Match 41.16%

When I try to copy an Outlook .pst file, I get this error message.."The process cannot access the file because another process has locked a portion of the file."

The file is set for file sharing and other files (in other directories) can be copied. The program is not being used and I checked msconfig to see if it was resident. It is not.

Any ideas?


A:Cannot Copy File

Try copying while in Safe Mode.

2 more replies
Answer Match 41.16%

I have a backup script I created using Robocopy to always keep a fresh backup of some of my most important data but just noticed one of my files fails to be copied to my backup disk.

The file in question is a executable file called LTL.exe and is a small utility that is part of a scenery add-on product for Microsoft Flight Simulator X.

I've also tried copy this file manually in Explorer by right-clicking the file and then choosing Copy-Paste and although I don't get any error message doing this and the copy process seems to be successful the file never ends up at the destination.

I'm running Win 7 x64 Ultimate and I have UAC disabled (not that it should be important since I'm not trying to copy the file into a system folder) and I'm local administrator on my PC. I've also tried taking ownership of this specific file and double and triple-checking I have full control for this specific file looking at the security tab.

If I launch the file in it's original location the utility starts up just fine so the file doesn't seem to be corrupt.

I've also scanned both this file and my complete PC for viruses both using Avast! and Malwarebytes Anti-Malware and all is good...not a trace of any viruses.

Many thanks in advance for what could cause this, never seen this before!!

Editied to add I did another test, tried copying the file within the same physical disk and that went fine so that makes me wonder if I'm facing some weird kind of copy protection here not allowing me to cop... Read more

A:Can't copy a file

My thought was copy protection. Try via command prompt. But I bet it doesn't go.

Edit: the way to back it up for disaster avoidance is to make an image of the disk partition. Macrium Reflect Free is good. There are other free imaging programs. Look on

9 more replies
Answer Match 41.16%

Although I can copy small files from my Win7 machine to my wife's XP, copying larger files consistently results in the error: 'There is a problem accessing (the particular target dir) Make sure you are connected and try again"

Anyone know what could be causing this problem?


A:Copy file to XP

Hi, this problem is probably caused by an inconsistent WiFi connection.

It could be on either computer.

Make sure the network drivers are are all completely upto date on both of your PCs and then try again.

Post back with any results.


7 more replies
Answer Match 41.16%

Here is my problem

My previous OS was Win 98. My HD was 80 Gb partitioned in to the following C: 20Gb, D: E: F: G: H: I: 10Gb each.

I formatted C: in NTFS and clean installed XP pro.
All the other partitions are FAT32.

I am trying to copy a 4Mb .exe file from a CD-r onto one of the partitions, but I keep getting an error message

"Cannot copy file invalid MS-DOS function"

In explorer if I right click -> properties on any folder the folder attributes are set to Read Only. I set the attribute to Archive or remove the Read Only but this doesn't to work. The attribute is always reset to Read Only.

I log on as administrator but makes no difference.

I am new to Xp but this is doing my head in.

Any help would be appreciated.

A:Can't copy exe file from CD-r to HD

6 more replies
Answer Match 41.16%

I recently backed up a Microsoft Access file. I formatted my domputer and reinstalled all software. I am trying to copy the file back to it's source directory. I am getting this Error messeage. (Cyclic Redundancy Check) Is there another way to copy this file to where I need.

Thanks Tim

A:File Copy

A CRC problem means that either the original file was corrupt or the archived one is corrupt. You should always check the backup logs after you complete your backup. I think you might be out of luck.

2 more replies
Answer Match 41.16%

I recently purchased a used computer, running windows 98. I would like to know how to copy files from my old computer hard drive, also running windows

A:file copy

Hi and welcome. Easiest way would be to slave the other hard drive to the computer where you wish to transfer files.

3 more replies
Answer Match 41.16%

Friends: Somehow my favourite screensaver got deleted and I am trying to copy it from another PC. I copied the .SCR file from this PC to a floppy, but when I try to copy this file onto the System32 directory I keep getting the message it cannot be copied. Any ideas how I can fix this? The website I got the screensaver from is no longer available. Windows XP Pro. Thanks for any help.

A:Cannot copy .SCR file

The only thing I can think of is permissions. Are you trying to do this from an admin account and do you have any security software that might be blocking system folders from access?

Also, can you copy it off the floppy somewhere else first like your documents, and then try moving it to System32?

2 more replies
Answer Match 41.16%

i am santosh. i want to copy a photo wich is in gif format. i had paste on word document from internet but image does not there. it gives message unavalable link.
please can anyone tell me can i copy these type of file to my hdd.

A:gif file copy

Right click on the image and do a "save as" to your hard disk. You can import that image into Word.

FWIW, I just right clicked on a graphic on a web page and selected "copy" from the drop-down menu, I was able to paste that image into a Word 2007 document.

1 more replies
Answer Match 41.16%

Hey can someone tell me how I can copy a file to a workstation that is already in use with a GPO?  I don't care if gets on there when windows is shutting down or when windows is starting up.  I just don't want to do the Kill explorer/take ownership

More replies