Under XP, when I played an MP3 it would come out of my headphones and my SPDIF port to my AMP at the same time. Under vista I seem to have to choose and keep changing them manually (setting one as default) . Also, when I change them, it doesn't seem to take effect till I restart that application, mp3 player, movie player or whatever.
I seem to have similar issues with mic vs line-in. and switching between them doesn't always seem to work if in use and Mute options also seem to not kick in.
I read some scare stories about DRM but I'm not sure that this is relevent or not .
In XP, this just worked. sound would go into the IN's and come out of the OUTs and could be muted where needed. Does this work differently now?
It started happening back in around November, my sister and my computer would start freezing occasionally, slurring the audio into a robotic sound, eventually to come to.
It gradually got worse, and I assumed it was a graphics card problem since it would freeze ONLY SOMETIMES and say that the graphics driver stopped working and has recovered. It usually didn't say that, though.
Lately though, I noticed that when it would freeze sometimes the internet would go out for some connected devices, such as the Xbox 360. The only computer that was NEVER affected by this is the one connected directly by Ethernet to the Netgear router, (every other device is WiFi.)
Sometimes even, my sister and mine would freeze simultaneously. It was a sort of rare occurrence, though.
I very lately started to notice that it would freeze when trying to load internet components with larger amounts of data, such as server console logs, Flash videos, and Soundcloud players. What threw me off is that it would sometimes freeze in programs like FL Studio or Windows Media Player... It's possible I guess that the programs were unrelated and what caused the freeze is SOMETHING sending/receiving corrupt packets.
I also noticed that sometimes my WiFi adapter stops functioning, although it says it works fine. I have to reset the adapter to get it to work.
I have done many virus scans since it's started and it doesn't fix anything. I've updated every type of driver, tried going low on ... Read more
8 more replies
I'm not entirely sure if this is a Windows Sound issue or a hardware issue, so I'm asking this question both here and in a Windows Community Forum. Is it possible to output audio to multiple devices (i. e., can one assign more than one "Default Device")? For example, can I output to the USB-S/P-Dif device connected to my stereo and the bluetooth device driving my outdoor speakers simultaneously? I have an Envy dv7-7255dx, with the IDT Hi-Def audio codec, running 64-bit Windows 10 Home. Thanks!More replies
I'm trying to use my speakers for everything except one program. I want to use my headphones for a chat program called Ventrillo. any ideas or suggestions?
I've tried just about everything I could think of and still nothing. Tried changing audio output settings on everything and still cant figure it out. Anyone know if its even possible?
Not sure whats happening here but getting multiple displays for the same devices !!!!
Any fix, or is system Broken.
Looks like Ghosts of DLNA devices. Start by taking offline any DLNA capable gear, reboot the Gateway and also clear its IP Table.
Also clear out those ghosts from Devices and Printers.
For some reason this started in Windows 7, when Microsoft started to play games with DLNA and media Shares.
I've taken myself the challenge I've been avoiding for some time, creating a plattform for connecting a radio to your computer through the USB port.
So basicly I need to know if there is anyone here with any knowledge in this field who wants to answer a few questions, or if there is anyone who knows where to direct those questions...
The most important question would be how the signal has to be converted to be put through the USB connection. Followed by how to create the drivers needed to get the computer to understand these signals as soundsignals.
I'd greatly appreacitate any help, as I'm guessing it's not anything usual I'm asking about
My question would be, what are you trying to do? Are you trying to record the radio output into the computer?
USB connections are for Hardware. So you're saying that you want a radio to become a piece of hardware? Could you clarify?
Just wondering if anybody could help me.
I have Vista Home Premium 64bit and also a Creative Soundblaster Soundcard.
I was wondering if you can output different applications to the different devices?
i.e. Speakers for Music and Game through Headphones.
Some applications have this feature in the software. i.e. Propellerheads Reason 4.0 allows you to chose the Output device of the sounds in the preferences menu.
If anybody can help, appreciate it.
Can't think what else to say but it you want to know something that could help just ask me
I've never actually tried this but it might be achievable by going to your playback devices and setting them to 'allow applications to take exclusive control'.
In your playback devices be sure to have both your headphones and speakers enabled.
Depending on which of your applications can choose a dedicated output you will either have to do one of the following:
if the game you play allows you to select headphones, do this and set your speakers as default audio device. your game should 'take exclusive control' of your headphones while your mediaplayer plays normally on your speakers.
if the media playback software allows you to select speakers, do this and set your headphones as default audio device. your media player should take exclusive control of your speakers and your game plays normally on your headphones.
If this doesn't work try looking for solutions on creative forums.
If it is possible with the creative drivers/programs surely you should be able to find out on their site(s).
I'm using an Asus P7P55D-E LX Motherboard, I've recently switched to Windows 7 from XP. When I was on XP I was outputting sound through my motherboard's Optical Cable to a surround sound system, but I also had a pair of headphones connected into the headphone jack of the motherboard, both received sound at the same time.
It would seem I can't do this, at least not with the default settings of Windows 7? What gives? I can only set one default, I can't seem to make sound come out of both... this is very inconvenient.
Windows will only allow one default audio playback device, as you have found out. I've heard there are some (pay for) software that will get around this but I've never seen or used it.2 more replies
Recently got a USB headset, and I have speakers plugged in as well. How do I switch between the two when I want audio to only come from speakers and vice versa? I took this screenshot if it helps: http://puu.sh/FWMO
SoundSwitch2 more replies
I have a compaq 7360. My computer is not showing the display on the monitor. The keyboards num lock also does not turn on once started. The computer when turned on, displays the green light showing that the power is on and also the green light for the hard disk, but there is no display on the monitor, whose light is set to amber.
I'm not sure what the problem is. It just started after I restarted it a few days ago.
Hey guys, first post, got a bit of a problem I need to solve asap for my work, I really hope someone good with telnet reads this...
2 main problems:
Some switches accept my username and password but do not output anymore.
Others let me log in ok, and run commands, but output weird stuff. Some give me the output from my command at the end, but some do not, and thats my problem.
For one of our customers, we support all their LAN in their datacentres around the world. Some 200 switches roughly. About 2/3 are HP (not all the same) the rest are Cisco. We can access a terminal server from which we can telnet to all of them.
Due to frequent changes in hardware etc, we need to have a back-up of the configurations of all of these switches,but until now we've had no way to do this except manually one by one - but we need this to be done daily.
I tried using Plink (command line of Putty) however it cannot seem to pass credentials to login via telnet. Ive done the same thing before using Plink for devices which use SSH and it works fine, but not telnet.
We didnt want to buy Kiwi Cat Tools for reasons unknown to me.
So I have written my own Telnet Client using C# to do this, and it works a treat. It spools up a background worker for every switch and each background worker opens a socket to each device simultaneously and works by reading from and writing to the network byte stream.
The methods im using work perfectly for all but 6 of our HP switches, a... Read more
I have a built in sound chip and a much better lower noise external USB sound in/out box.
Both work fine, but, for reasons too complicated to go into here, I'd like to have programs output their sound through both simultaneously.
Anyone know if this is possible? If so how??
Thanks in advance for any ideas.
(XP pro High speed Athlon or Intel Core 2 duo)
Not sure this goes here, but in my research so far have found that Vista handles audio differently than previous Windows so here goes..
Running Vista Home Premium 64 bit on an ASUS P6T mobo with onboard audio that uses a SoundMax audio driver.
My old XP system detects my USB headset being plugged in and diverts audio out to the headset. On the Vista system I have to go into Sound from control panel and set the default playback device to USB headset in order to use the headset. Then when I am done with the headset I have to go back to control panel and set default playback to Soundmax.
Is there any way to automate this process? Sure seems like a step backward to me.
have you checked in control panel to see if the usb drivers are loaded correctly as it sounds like your usb port is not recognising or is not working try another usb device in the port try your headphones in a diffrent port on your comp to test both then check the drivers3 more replies
Running Vista on an HP laptop. Volume icon now has a red X over it and I have no sound. I went through all the common fixes including trying to download new audio drivers all to no avail. Any ideas anyone?
This is a common problem in Vista and unfortunately it is usually solved by reinstalling the OS. When you said you did all the standard steps, did you follow the steps here. Did you try a System Restore before the problem occurred?
To rule out a hardware failure you could download a small linux distro, Puppy 5.7 is good. Try playing a sound file. If you do not get sound in Puppy then I would say your internal sound card has failed. You may want to look at purchasing a USB sound dongle good for earphones only.
Apologies if this has been discussed elsewhere, couldn't find anything on the search.
I was wondering if there was any solution (Software or Hardware) to plugging in two audio devices (i.e. Headphones & Speakers) to a single Audio Card (I have Creative SoundBlaster X-Fi) and then having either a physical switch or a software solution to changing between which device outputs the audio.
Thanks in advance for any advice.
Do your speakers have a headphone jack?
You can also buy a splitter like this almost anywhere: http://www.fruitridgetools.com/stor...aspx?sfid=136763&i=129950486&mpid=8171&dfid=1
And turn off the speakers when you want to use the headphones.
You also need, or should use the Creative Audio Console to switch between speaker and headphone mode - note that switching between these modes does not mute the other device but switches to a multi-channel and separate headphone output mode.
I consider myself an advanced user, but this one I've never seen, nor can I find info out for...
I haven't been able to plug a video camera or external hard drive into my computer via FireWire. I then tried a different cable, nothing. I then tried a different device and cable, nothing. I then tried a different computer with two devices, nothing.
My USB2.0 works fine with each device and computer. I also took the new computer into CompUSA and they tried their firewire device and all worked. I bought a new firewire cable, but I have the same luck with each device.
How can 2 external hardrives, and one sony camera not work, after working for a year. What happened? What do I need to do?
6 more replies
Hi My Aspire ES 15 (with windows 10) laptop can't use audio device, it's always shows "no audio output devices is installed". How can I do, please? Thanks
In addition, its model is ES1-531-P6KL.2 more replies
Hi My Aspire ES 15 (with windows 10) laptop can't use audio device, it's always shows "no audio output devices is installed". How can I do, please? Thanks
In addition, its model is ES1-531-P6KL.2 more replies
I'm going to assume this is a hardware problem. I'll start from the beginning. I plugged in my cell phone via a USB cord to transfer some stuff to it, and everything on my computer froze. My keyboards backlight turned off and my mouse wouldn't respond. Nothing was doing anything.
I shut down my computer using the power button on the front. It started booting up, I could hear the fans and the hard drive, but nothing turned on. The keyboard stayed unlit and the monitor didn't even come on. It's like nothing is getting any power. I'm starting to freak out a little bit....
I'm running Windows XP Home dual booted with Ubuntu Hardy, Dell Dimension 3000, 2.8Ghz P4 processor, 2GB RAM, ATI Radeon 9250.
Any idea what's going on? Any help is much appreciated.
9 more replies
>Have windows XP
>upgrade to windows 7 pro
>works fine, except no audio driver.
>install audio driver IDT High-Definition (HD) Audio Driver, but it doesn't work.
>in device manager, no sound under 'sound, vid, & game controllers'
>under 'other devices' 'multimedia audio controller' is there, with an error.
Mobo is ASUS Emery2 (ancient, i know)
ALSO: To be clear, it isn't that i'm not hearing sound, there ISN'T sound, meaning i can't turn it up, mute, etc...on the taskbar.
All help always appreciated.
There is no sound icon in the notification area? Did you upgrade to windows 7 or did you do a clean install? With doing an upgrade you can run into problems like this. It's just part of it. It's recommend to do a clean install and then install all updated drivers then install all the MS updates including any SP if available.6 more replies
My computer has recently begun having issues with sound, and I believe it comes from installing Battlefield 3. The problem that has arisen is that the computer will detect sound devices and applications are present in the volume control panel.
The issue is that no applications produce any sound at all, the sound bars do not move in the volume mixer, under sound in the control panel or inside any creative software. Most applications do run still but some like Windows Media Player can simply not play any files that contain audio, a restart does fix the problem for a while but eventually it reverts back to this state.
A friend of mine shares the same problem and it started around the same time as he installed Battlefield 3, he also has the same sound card as me. He has tried reinstalling drivers, games, Teamspeak and his only solution was to do away with his sound card, I have only had mine for a week and I don't want to waste the money.
Any help would be greatly appreciated.
Sound Card: Creative Labs X-Fi Titanium PCIe
I have a bluetooth headset that already paired but it is unable to use because there is no audio services to work with. When I run the troubleshooting for my sound, it couldn't identify the problem. In my device manager, the bluetooth audio is gone (it used to be there) and i also have many unknow device that related to bluetooth. I used to played with registry when i was trying to fix something else, maybe that the cause, but when i run the Sfc /scannow, notthing seems wrong. I have been searching solution for this problem for a month and yet, notthing works. Please help, im using sony vaio Model # SVS15116FXB. I also tried to download some drivers from the sony sites, but they are useless.
I would uninstall all the unknown and Bluetooth devices listed in the Device Manager. Leave that off until you get the basic sound going again. Restart the PC after uninstalling all the Bluetooth and unknown devices.
If the PC's sound device is enabled in the BIOS, Windows should detect it and install either the regular drivers or at least the generic, basic function, HIgh Definition Audio Drivers (Codec). If its not being detected and installed, the first thing is to check the BIOS. If its disabled in the BIOS then Windows will not see/detect it. If its enabled in the BIOS, reinstall the Intel motherboard chipset drivers. One of the things the chipset drivers do is define (identify) all the devices on the motherboard. This too affects whether the sound can be detected.
Just converted a friend's 2005 vintage Sony Vaio FS730 laptop XP system to Windows 7. Sony has no drivers for this machine beyond XP. Their available Vista drivers seem to be for different hardware.
The machine runs OK, but there are no sound output devices using the windows default installed "HD audio codecs." Using this driver there are no output sound devices found (disabled and hidden included) but the driver appears to function. Plugging headphones/speakers into the jack gives no sound and nothing from the built in speakers.
I've downloaded the Realtek drivers version 2.73, uninstalled the existing drivers, and installed twice, but get a Blue Screen of Death (BSOD) after installing.
The hardware code for the device from msinfo32 components is
PNP Device ID HDAUDIO\FUNC_01&VEN_10EC&DEV_0260&SUBSYS_104D0000&REV_1003\4&10F4C67C&0&0001
Any clues or suggestions on getting audio functioning on this machine would be greatly appreciated.
Hi Welcome to Seven Forums ... Try the Driver in the Link below ..
Sony eSupport - VGN-FS920 - Drivers & Software
There are multiple websites that I cannot connect to, facebook, rottentomatoes, youtube, to name a few. Others seem perfectly fine. A few seem okay, but seem to be running slowly.
This is the case for both my computer (on which I am running Windows 7), which is connected directly to the router, *and* mobile devices which are connected wirelessly.
On my computer I have tried using several different browsers to no avail, but when I used the TOR browser to proxy, I was able to access them.
I apologize if this has been asked, but I haven't been able to find anything this specific.
6 more replies
I recently restored my computer to factory new because of a other problem I had before with the internet only saying Local Only Once I restored it, I cannot use my audio like I said in the title. Here are some screenshots on what I mean:
I have also looked around for my RealTek Audio Manager and I couldn't find it anywhere but in my uninstall tab and in my Program Files folder.
I hope you guys can help me with my problems!
Hi i have a hp pavillioin dv 6000 with a model number of dv 6605us and am with a vista home basic operating system and am having problems with the audio when i play music it plays but no sound is outputed but now i have an error message saying no audio output devices have been installed i have tried all possible solutions like re installing the audio drivers but none is working and i now cant even see sounds listed in the device manager please help me solve this am really frustrated thanks.
In device manager You've clicked VIEW/put a dot on Device By Type and you do not see Sound, Video and Game Controllers? And if you do see that and click its dropdown menu, there is no entry for Realtek High Definition Audio Controller? Where and how did you install the drivers then. Was realtek uninstalled by accident. Do you see anything in Control Panel as in Realtek HD Audio Manager??11 more replies
Our ISP recently updated their hard ware to work with the Sprint network. Note: our ISP is not Sprint, but the local phone company.
Internet: DSL 10.0 (highest speed available)
Modem: Comtrend (ISP provides)
Router: Belkin N
Computer: 10 yr old Dell running XP - service pac3 - wired connection
Kindle Fire (first edition, no HD, etc) - wireless connection
Xbox 360 - wireless connection
Xbox - went from constantly bumped from Xbox Live game by losing internet connection to not being able to enter a game at all
Kindle - went from occasional "network error' message during online tasks to having to restart download (multiple times) or refresh page for most any or all online tasks
Computer - have to click refresh to get most any page to load after the home page
What we've tried so far:
I have recently cleared the cache on both the computer and Kindle. XBox's new security measures have been met.
Do any or all of these issues seem to be related?
Is there a piece of equipment or something we may be missing to make all of these things work? I am a networking novice.
Who should I call to get these issues corrected, my ISP or a tech service? Note: if I start with the ISP and they do not find an issue I have to pay for the call.
First. You should try to NOT use a wireless connection for any type of gaming: PC, Mac, Console, etc. If you can hard wire the xbox you'll be waaay better off than using wireless.
Now... Yes, the issues could be related - there maybe an issue with the Belkin N router. I'd try to first reset the Belkin router to default settings, check on manufacturer website for instructions how, most routers you can press a "reset" button w/ a paperclip or ball point pen. Reconfigure the Belkin router, recreate the wireless network and see how everything works. If you are still having issues, humor me and connect the Dell directly to the DSL modem, bypassing Belkin router. See if you still have connection issues, if you do then it could be the DSL modem that is the problem and call your ISP to replace. If you don't have same issues then it's most likely an issue with the Belkin router. Replace it. Don't buy the dirt cheapest router at the store, but you most likely don't need the most expensive one either. Find a good middle ground router, ask sales associate to assist you accordingly.
Post back, Hope this helps!!
I have searched the forums and was not able to find anything on this issue.
windows media player will not display any video on secondary screens. I have a computer hooked up to a network of display outputs and when i tried to show a video it would play on the computer but the outputs (which showed everything else on the screen just fine) would just have a blank area where the video was supposed to be playing. sound worked fine.
My found temp solution:
WMP will only play video on the primary display device, It will not even let me toggle in between display devices while WMP is running. If i change the display device to my secondary screen (main laptop screen is now blank) and reopen WMP the videos will work as they should.
full solution endstate: display video on both primary and secondary screens simultaneously.
other info: unfortunately, there is a class being taught with said computer using temp solution, so i am unable to get WMP version. it is on an XP machine.
all help is appreciated.
If you have ATI Catalyst Control Advanced there is a place in the settings for the form of vidieo playback you want on a secondary display (same as 1st, full screen, etc.). There might/should be something very similar for Nvidia as well.
If not however or maybe in spite of these settings correctly set, it doesn't work and if there is no other problem its a video acceleration problem which you can force by going to Display settings/Settings/Advanced/Troubleshoot and set the hardware acceleration to about 50% first and restart the player and see if it works. If not, set it all the way off and it should work if your system is capable and has no other problem. You will lose some other minor functionality in the video subsystem so its only a temporary solution. Definitely see if the Control center settings solve the problem first.
I want to put speakers out on my patio, could i have 2 sets of speakers hooked up to my PC and switch which ones the music is sent to as and when? will i need anything special as in hardware or software?
Absolutely this is possible. Many people like to use their computer as a sound source and play music in one or multiple places. First a few tips which may be a little bit more information did you need. It's just that you have asked a good question.
Computers put out enough power to operate headphones or very small speakers. If you want to have speakers that play louder
Absolutely this is possible. Many people like to use their computer as a sound source and play music in one or multiple places. First a few tips which may be a little bit more information did you need. It's just that you have asked a good question.
Computers put out enough power to operate headphones or very small speakers. If you want to have speakers that play louder or higher quality you need to add an amplifier. If however you have a small set of speakers that are working well for you which are plugged into the computer directly just purchase a second set for outside and look at the ideas about switching below.
1) Speaker selection. Better speakers require more power. An amplifier can be built into the speaker. These so-called powered speakers therefore require either electricity from a wall socket to run the amplifier or batteries which you exchange your charge. For outside applications this need for power can be a nuisance. Also the audio signal to them is carried in cables which have RCA plugs on the end. There are switches which allow you to choose one or the other set of speakers. Sw... Read more
We have an Audio Visual suite with multiple PCs connecting through a switch box to a plasma screen TV.
Each PC has it's own NVidia Geforce 7200 with dual output: one outputs to the PCs local monitor. The other is an output to the switch box and plasma screen.
The problem we have is that the graphics cards won't output a mirrored desktop to the video switchers unless: firstly the switcher is set to that PC's channel, and then you enable the mirrored desktop in the graphics card control panel (that is per session). We want the cards to output to the plasma screen from the moment the PC is powered on. NVidia drivers installed are currently 1.4.13.
In effect we want the cards to output on BOTH heads from system startup... this maybe a hardware or firmware issue I guess...
Can anyone advise please?
So i have 2 monitors at the moment, both through the same graphics cards (not using crossfire ready thing) Using exact same specs/build as i have on my profile, My Hd tv is using hdmi, and the other is using AVI/vga, i was wondering how can i get both screens to play audio, all it lets me do is set one as default, and not let me pick if i want to play through both, yet i have the option to turn either one up, and control them both freely while they are enabled Overall i want to play through both, btw the sound on the vga screen is through the rear Audo jack if that helps
Thanks for any an all help!
Radeon HD 6870
You can only have one default audio playback device, as you have found out. Although there may be, I have never seen anything posted on getting around the Windows limitation.
But, what you could do is use the Analog sound card's output and then split it externally, to whatever devices you want.
Buetooth issue with WINDOWS 7
I have been doing a lot of research on this issue, and have been unable to come up with a solution.
I have a BLUEETOOTH dongle attached to each of my 3 systems. I use BLUETOOTH as my default audio device The sound quality is great. (Far better than that of a laptop.)
I have a BLUETOOTH reciever attached to my stereo system, used for streaming PANDORA radio. I also have several other portable BLUETOOTH recievers, one of which I like to use outside on the deck.
Why is it that WINDOWS 7 only allows 1 audio device to be used at a time. I would like to stream audio to multiple BLUETOOTH devices, but WINDOWS 7 does not allow that.
When right clicking on the speaker icon to bring up "playback devices", only one device is allowed to be set as default! Also, if I want to pair with a second device, a pop up window tells me that I must first disconnect the device that is already paired, before I can pair a different device. Why is that?
If anyone out there knows a way to pair more than 1 BLUETOOTH device at the same time, and output audio to more than 1 device at a time, I would love to know the solution.
Have just bought 2 bluetooth headsets so my wife and I can listen to anything playing on the Media Center PC hooked up to the TV: Spotify, Media Center, iTunes, iPlayer, YouTube.
I'll have to send them back now and carry on using the infrared headphones plugged into the amp. Far inferior.
For some reason Windows 7 only allows one playback device at a time. What a silly and unnecessary restriction. Surely there must be a driver that can redirect the stream to multiple devices? Perhaps a registry hack to make Windows think that two devices are the same physical device by giving them the same ID?
I'm absolutely gutted that such an obvious requirement is missing from Windows.
I want to ouput the results of multiple queries to different sheets in the same excel file. The docmd.transferspreadsheet method works great except that if a user makes any changes to the file and saves it, the changes save, and the next time the user triggers the event for the ouput query the command doesn't overwrite the previous changes and the file contains the previous changes made as well. While the docmd.outputto command doesn't allow the user to makes changes and even if the user does the next time you run the command it overwrites the changes the user made....i want something like that with the added benefit of being able to output multiple queries to an excel sheet...
This is what i have as of now:
DoCmd.TransferSpreadsheet acExport, acSpreadsheetTypeExcel97, _
"Order Subtotals", "C:\Sales.xls"
DoCmd.TransferSpreadsheet acExport, acSpreadsheetTypeExcel97, _
Does anyone have any suggestions or ideas?? ..it would be much appreciated!!
Thanks in advance..
I want to use the audio simultaneously from my ati 4550 HDMI, Sony blue-tooth speaker via usb BT dongle, 3.5mm jacks on my mobo, and also from a spdif and digital coax linked to the mobo via on board header to expansion bracket with ports.
I know this all may sound like overkill, however I don't have the funds for high end switches / replicators, etc. So manually changing them has been a hassle.
I have done some reading and I know se7en doesn't let you. I did this with xp x64.
Anyone know of a "work-around" or hack to enable all devices at once?
4gb Kingston 667mhz
Ultra MD3 Dashboard
Gyration RF MCE Universal Remote
From what I see, you can only have one "Default" Playback device so I doubt that what you want to do can be accomplished.2 more replies
I use w10 on 3 devices, a mid range gaming PC, linx7 tablet, and lumia640. On the whole the experience is pretty good, syncing works well, reminders, alarms, contacts etc. This was one of the reasons I opted for android early, using chrome on a PC gave a similar, yet skimmed down, one OS feel.
I've not had one BSOD since updating the 'rig', my mobile works great, and the tablet is amazing for ?49! I was talking to my father in law who uses all 3 main OSs every day, and we both agree that windows just feels more 'grown up' than iOS or android. He wants a win10 phone next to replace his android (he'll have to keep the company iPhone4).
So like I said, does anyone else have a similar experience?
yeah i have no probs with my Lumia 920, HP work laptop and 2 of table computers at home.
just pisses me off to have the same background on each computer and i seem not to be able to find a setting to keep that sync out
I'm not sure whether what i want to achieve is possible, but here s my objective. Having just got into music streaming from my Windows 7 pc, using Firefox as browser and Deezer for the music i wanted to achieve multiple room listening rather than just listening from the stereo speakers attached to the pc. So, i've plugged in a bluetooth usb adapter (Advent, with EDR) and connected up a harman/karman BTA10 bluetooth adapter to the hi-fi in my living room and purchased a Minx Go (Cambridge Audio) portable wireless music system speaker. To my great relief all installed successfully and all the devices play - but only individually.
The question therefore is can i, and how do i go about adjusting the computer audio settings to have music playing simultaneously via the hi-fi in the living room, the pc connected speakers in the back room and the portable Minx bluetooth speaker? When i looked at Control Panel and then 'Sound' i've found how to change the default playback source between the items listed, but can't see how i can get all the items to play music from Deezer at the same time for that multi-room sound experience.
I'd appreciate any help you can give, and in simple steps because i'm no computer techie!
(Last point, just in case it's relevant concerns the Advent Bluetooth adapter. I purchased this online having checked that it was going to be okay for Windows 7. On the packet though it says Windows 2000, XP and Vista but having then chec... Read more
I can say that overall it is possible to do…maybe not with your specific hardware setup. For example, if you are using a system using AirPlay to stream (i.e. Airport Expresses connected to speakers, other computers, iOS devices, AppleTV), then iTunes music can be streamed with to multiple locations with no additional software. I have such a setup. If you want to stream non-iTunes content, then you can use a third-party program called Airfoil to stream that other content.Now, obviously, unless you want to switch gears to an Airplay system (or something else, the above does not seem to help much.Where is helps is that maybe there is some other third party application that can do something similar for your situation.You might see if this helps:http://www.tomshardware.com/forum/66484-63-output-audio-devices-time2 more replies
How to extend dvi output to multiple hdmi monitors? Have Samsung Series 7 Slate tablet computer running Windows 7 Ultimate 64-bit. Nature of computer prevents swapping out graphics card/module. Please advise.
You can get an adapter to run a second monitor from a USB port. There are serveral available on amzon and such. Just search for "USB to HDMI Adapter" Assuming your Tablet has a USB port.2 more replies
Hi, I have bought a Acer aspire 8920 recently...
i have realtek audio
I am having problems with sound, conflicts with sound from multiple programs.
wasnt a problem with winXP.
Example, I run winamp to listen to music and then watch a clip on youtube.
there is no sound from the clip. But when I close winamp i get sound from youtube clip.
this also happens the other way around.
also happens when i have veoh tv on and watch youtube clips.
also if i run zoom player installed from cccp codec pack and winamp
also if i run an emulator for games and watch a clip.
please help. thanks in advance
I am searching for a way to play the audio from my pc to my speakers and my stereo set.
my stereo has a USB connection, my speaker set uses a mini-jack.
When I plug both in, only 1 plays the actual audio.
I googled around and it seems that that's just the way how windows 7 is programmed.
I download virtual audio cable to try and fix it, but I didn't know my way around it, started fiddling and failed.
My question is, can I forward the sound to the stereo-set and still have the same sound playing from the speakers?
Also, since it's actually a 2.0 and a 2.1 set, would it be possible (by using specific software) to make it a 4.1 set and so make it behave as such?
I hope it's understandable what I wrote, if it isn't, tell me and I'll try to explain myself better.
EDIT: since it's a problem in the software of windows 7, I put it in this section, is that okay?
E2: Also, my pc sometimes just freezes up and plays sound at 1/10 of the speed, cracks and then after 10 seconds just revives and goes along as if nothing happened.
E3: Also, at startup I sometimes see a glimpse of the command prompt (cmd.exe) could this be a bad sign or am I just paranoid?
The audio source on your computer will only play on one output at a time. You could plug a Y jack into the headphones port and send that signal to 2 inputs, but it won't go to USB3 more replies
i have speakers connected to the hdmi and have a fm transmitter connected to the headphones jack. how do i get the soud to come out of both? Picture:
You can't have sound from both at same time - it's either one or other because the headphone jack is designed to mute the speakers when headphones are plugged into it.
Windows 7 Ultimate, 64 bit. Home network. Already have 3 printer devices. One printer is All-in-One (HP). Want to keep that device installed and be able to use all functions. Want to add a desk top scanner for speed and versatility. The All-in-One is network cabled and also USB to my desktop computer. The desktop scanner is not network; would be USB to my desktop computer. I seem to recall reading somewhere (not sure of this - maybe HP literature to discourage buying other scanners) that you can't have more than one scanner. Doesn't seem logical. Is more than one scanner (using only one at any one time) OK?
As far as I know you have as many usb devices hooked up to one computer. There is a theoretical limit of 124, but it really is determined on how many usb ports you have as to how many usb devices you can hook up. Each device has it's own driver/software package, so I don't see any real reason you couldn't. I know for a fact you can have a printer (all in one) and scanner hooked up at the same time. My dad did using XP, Lexmark all in one printer and an HP scanner.4 more replies
Hi, I recently purchased a HP Pavilion dv6974 Laptop, it came installed with Vista 64-bit. It works fine and all, just one thing I want to figure out.
The laptop has built-in speakers, a built-in mic, 2 headphone jacks and 1 microphone jack. I plugged my headset into one of the headphone jacks, my headset microphone into the microphone jack, and my external speakers into the second headphone jack.
What I wish to do is to set it up in a way that I can play music through my speakers, and Ventrilo through my headset.
The way I did this before on my desktop was that there was this option in the Realtek Audio Manager called "enable playback multi-stream" that separated the two audio jacks on the computer (one in the back, and one in the front). Then I was able to choose a different audio driver for Ventrilo, and use the default one for music. This was on XP, and I only had one sound card btw.
And now for Vista, I've tried looking through the Audio Device Manager and the Realtek Audio Manager but couldn't find anything that would help much, except in the Realtek Audio Manager there's this "tie up all input jacks something something, etc" that sounded like it was what I was looking for, but all it did was mess up my microphone.
To add more to this confusion, there is actually another audio device in the Audio Device Manager, but it's the Digital Audio Receiver, and I don't really know what that does.
I've asked about this problem elsewhere, and some peopl... Read more
Hi, ForeverRen, and welcome to the forums.
I think HP would be your best bet in this instance....as they would be able to tell you for sure if that can be done with their hardware or not.
Ok, this isn't really pc related, but I'm sure it's an issue many of you face every day. I have a PDA/GPS, cell, bluetooth headset and blackberry. I use each every day, which means every night I have to plug all four devices in to charge. Does anyone know of some kind of charging station that would house all four power adapters neatly and allow me to charge all four devices from one outlet? Is there some kind of travel charger that would let me plug all four devices in to charge at once? Such a hassle taking all four adapters every time I travel.
7 more replies
I use laptop, with system speaker volume too low, almost inaudible.
It has inbuilt sigmatel HD audio, with 3.5 mm jack ( I do connect my headphone with it).
I also posses a bluetooth headset (DELL).
Is there any way I can get output to both the headsets?
I need this to watch movie, so that me and my room partner can easily listen via saperate sets fo headphone without difficulty.
as far as i know you cannot output to two audio devices at the same time from one program unless the program alows this (eg. PCDJ)
To solve the problem you could get a 3.5mm spliter and another set of 3.5mm headphones but this would probably require a trip to an electronics shop unless you have one already.
also post what OS you are running in case someone else knows of another way.
So here's the setup:
Windows Home Premium X64, 8GB Ram, I5-3570K CPU
Recently built. I understand there's been an issue with Windows 7 using different devices for audio outputs. I was told by MS IT to use Virtual Audio Cable (VAC) for 'combining' my programs/devices into the same output.
My computer is mostly built for Audio recording (Audacity, Adobe Audition), and virtual instrumentation (Reason 5, FL Studio, Abelton, etc...)
My issue is that while some of these programs work well with VAC, key important ones such as Reason 5 do not. With my particular soundcard and driver, there is a degree of latency between the time I press a note on the keyboard to when I can actually hear it.
FL Studio automatically bundles ASIO4ALL - an awesome '0 latency' driver pack that comes with a easy to use control menu. ASIO4ALL is automatically selected as the audio card driver.
However I am unable to use VAC whilst keeping the latency low at the same time.
I need some help if you please!
I have a Sonar X2 (Producer) studio. Something like your questions would be better answered on a board such as www.gearslutz.com where recording and DAW equipment is the topic of the forum.
I don't like ASIO4ALL, it can cause problems. I've had problems with trying to use it when I had a Focusrite Saffire Pro 40. I've seen other posts (on other forums) about ASIO4ALL problems.
I have a Roland Octa-Capture and an MAudio Fastrack Ultra 8R and I only use the drivers supplied by Roland and MAudio.
I have an ethernet connection running from a router to another room and I wonder if I could use that single connection for multiple devices (computer, game systems, etc). Will a hub work for a connection coming from a router?
Is it possible to have them all up and running simultaneously or does it have to be one device at a time?
If it's a standard SOHO router, and not a switch or a modem, you can have up to 253 devices attached. (There are 256 addresses available, but you can't use the first or last address, and one is reserved for the gateway--the router itself.) Note that the 253 addresses includes wireless devices.
I would like to connect a variety of wireless devices in my house to my work VPN while allowing other devices in the house access to my home network as normal.
I was hoping to find a wireless ADSL router that allows me to associate a LAN port to a VPN connection, then connect a wireless access point to that port. I could then run two wireless networks in my house, one that would connect to my work VPN and the other that would not.
Is there such a router?
If not, is there some other way of doing what I need?
Sorry for the bump, but would this do the trick?
hi, i'm relatively new here, so i'm not really sure how to do this but alot of my games are having problems i.e. ? has cause in invalid page fault in unknown. I am led to believe it is a soundcard problem, i use an onboard sound card with the VIA VT1612A 2-channel audio Codec and i look in multimedia properties under audio devices, i had two different ones, Audio for via Ac'97 Enhanced Audio Controller(WDM), and Audio for Vinyl AC'97 Codec Combo Driver (WDM), i was told by a friend to uninstall the drivers and then reinstall to fix this, i did, now on top of those two devices i have a second Audio for Vinyl AC'97 Codec Combo Driver (WDM). I also have three MIDI for WDM-based Device. ANd Mixer for VIA AC'97 Enhanced Audio Controller (WDM), along with two Mixer for Vinyl AC'97 Codec Combo Driver (WDM),this may be normal, but like i said i'm relatively new at this and it doesn't really look normal, so can someone please help me? Thank You
Look at the back of your computer. Do you have onboard sound AND a seperate PCI sound card? If so then you need to disable the onboard sound in the BIOS setup and use only the PCI sound card.
Now go to Add/Remove Programs and uninstall ALL VIA AC97, AC97, Vinyl audio drivers and anything else that looks like it goes to sound drivers.
Then go to Device Manager and uninstall/remove all remaining VIA/Vinyl/AC97 devices listed under the Multimedia heading. Reboot only after all are removed.
Then download the latest VIA Vinyl drivers. When you first run the new driver setup program it will look to see if there are still drivers installed, if it finds any then it give you the option to uninstall them. Do that and reboot.
Then run the VIA installation again and install the drivers, and reboot.
At any point Windows may redetect the sound card and want to reinstall the drivers - let it. Do NOT click Cancel on the Found New Hardware Wizard. If all goes well prior to install the latest driver the sound card should be detected as a PCI Multimedia Device and that means all the drivers will have been removed.
Here's the latest drivers: http://www.viaarena.com/Driver/Vinyl_AudioCode_v600a_M.zip
They are in a ZIP file, once extracted you need to run the SETUP.EXE file to install the drivers.
My system has a sound card and two USB audio devices. I can click the speaker -> options -> propertied -> mixer device and select 1 device and reboot and play via that device. However I would like to have all audio devices work at the same time. Is there a way to do this? If not, is there a way to switch without rebooting? (Windows 2000).
..................err? why do you need/want multiple audio devices from the one PC??????
We receive Email on Desk Top, Ipad and Laptop that is repeated each time we open a computer and look at the mail . Also have two programmes on the Desk Top that again repeate the mail : Windows Live Mail and Mozilla Thunderbird. This causes untold mail and most annoying. How can I just see the mail once on either of the computers. We run Windows 7 on the Lap Top and Desk Top, the Ipad is the current model.
Hope you can assist me please, my husband and self are not very computer literate.
The closest thing would be to set them all up as IMAP instead of POP accounts. That way you get all the same email, the same deletions and moves, and the same emails marked as read across all devices. It doesn't quite prevent you from seeing the email more than once unless you move that email to another folder or delete it in which case the same thing will happen on the rest of the devices.
You would have to check with your email service to see if they support IMAP and to get the correct settings. Or post your email provider here.
Also, I changed the title of your thread from your name to something more meaningful.
to be fair, i am also posting this problem on other sites. if i find a solution, i promise to share it at all sites.
i have purchased a magicjack, which is a device about twice the size of a flashdrive. it allows the owner to make phone calls and receive them, by utilizing the broadband connection, through the USB port.
it's very simple to activate. first plug the telephone line with the phone at the other end, then plug the magicjack into the USB port.
as you know, when using the usb port, a pop-up asks what you want to do. i choose "take no action>ok".
a registration GUI is supposed to pop-up after it loads. mine didn't without disabling my AV. i've heard that the firewall can also hamper this.
when the registration is complete, the new interface shows your new number, and says "ready to call".
for all intents and purposes, i will call the phone that's plugged into the magicjack the "magicjack phone".
i tried to call the magicjack phone from my cell phone, the cell phone number shows up on the magicjack interface. there is a recorded message that plays on the cell phone that says "the call you are attempting to place is not allowed from this line". i don't know if my cell phone company is allowing the call or not.
when i try to call the cell phone from the magicjack phone, i get a pop-up window stating the following:
no audio devices found
no output/input devices are found
pl... Read more
Didn't the device come with a driver disc? If not, go to the manufacturer's website for the latest driver available, download it and install it.
Right now I have my computer hooked up to two sets of I/O devices (mouse, keyboard, monitor) and I was wondering if you can separate them so that for example I can surf the web on one set and have a friend play a game on the other. Currently they show and control the same things.
Both monitors are on the same graphics card, one mouse/keyboard is USB the other PS/2
Thanks for any help.
Nope, there is only one console manager. Since you already have the monitor and keyboard, why not find a cheap machine and just have two?1 more replies
I seem to have a bug in the USB drivers or such that I need help with analyzing. I have tried deleting the USB drivers and letting the system update the driver. I am rather a newbie at system diagnostics but somewhat proficient at computers so hopefully with your help I can iron this problem out. Thanks very much ahead of time
HP dm4 laptop
Toshiba 500GB HD
You have both Norton Internet Security and AVG installed. Please remove one or the other and see if your system is then stable.
Norton Removal ToolHaving two security programs that accomplish the same tasks can cause conflicts/freezes/hangs/crashes/etc. due to them using the same system resources simultaneously. If you had tried to remove one prior to installing the other, it may be that remnants remain and you should contact support for that product to get it properly removed now.
Why do I have so many "base system devices" can I safely delete them ?
first, we need to know your system specs, follow this tutorial
Second, why are you posting a Win 8 issue in sevenforums when there is eightforums?
So on my home network, we have your normal cable modem, router, and gigabit switch setup. The router is a high speed linksys model (gigabit), and the gigabit switch is an 8 port. The ethernet goes all through the house, but I've recently built a media room. In this room I have a Zensonic High-def network dvd player for streaming media, a gaming/media pc, an xbox 360, ps3, modded xbox 1 for more media streaming and a wii. The wii isn't really relevant to the problem because it is wifi, but I'm proud of my media room.
The problem was that I needed to network all of these, and when the house was built, we only ran one ethernet port into the room. No big deal I thought, because as long as I'm just streaming media, a 10/100 switch would be sufficient. So I pulled out an old hub (not a switch). All of these devices were hooked up and it worked great. Then one day, it all just stopped. The hub was old, so I ran out and got a netgear fs605 switch on sale for 5 bucks at office depot. This still hasn't fixed the problem, but has helped me diagnose it. When I plug in the uplink, I get a blinking response. When I plug in the next device, it works and is recognized. However, every device after that causes the switch to stop working and just start blinking. No activity, it looks like an error code of some kind. Have I put too much on this little switch? It was working just fine for months on just a hub. Any thoughts?
6 more replies
Does anyone know if Windows 8 will intergrate multiple output devices to play at the same time? Windows 7 doesn't do it... which is stupid. Pirates will always find a way to bypass this, but I'm stuck without this important feature!!! This is absolutely CRUCIAL for HTPC (home theatre PC) people and/or DJ's or Music producers / Artists. I also use audio levelers like SRS audio essentials which is considered another audio playback device. This is truly ridiculous that I paid all of this money for Windows 7 and I can't play to 2 sets of speakers at the same time. And if I want to switch to headphones for a second for any particular reason, i have to go through a process... and make it the default device and when I want to go back to watching tv I have to go through the process again...... SO ANNOYING..... it's my computer, I should be able to play to ALLLLLLLL of my devices. That's why I buy all these devices so I can use them all simultaneously. This is so basic. Can you please update Windows 7 with multiple playback on all devices. I don't copyright infringe or rip dvd's to external sources, but even if I was a shady individual, which I'm NOT, I don't need multiple playback device to do this. You're only hurting ME, the consumer that pays for things I use. It's MADDENING. PLEASE UPDATE YOUR PLAYBACK DEVICES TO INCLUDE SIMULTANEOUS OUTPUT PLAYBACK TO ALL DEVICES.... OR AT LEAST SEVERAL... I mean really... for this stage of technology, this is totally ridiculous.
better to ask this question here
Windows 8 Forums
The people frequenting there have more direct experience with windows 8 than the average user here.
I have an Xbox One, Windows Phone, and Windows 10 laptop. I have Hey Cortana enabled on all of them. I use it all the time on Xbox to control my tv volume and channel. I use it while I'm driving on my phone. I don't use it that often on my laptop, but sometimes I will use it to change songs or something while I am working. The point is, I have fairly justifiable reasons to have it enabled on 3 devices.
So lets say I'm watching football. I have my fantasy stuff up on my laptop, and my phone is near bye because its always there. I decide I want to mute the TV, so I say "Hey Cortana, Mute". The result? My Tv mutes, my phone and my laptop both tell me that they cant perform that function. I do that same with volume up? Same result.
Later, I say "Hey Cortana, call Wife". The result? My Xbox and TV either try to open Skype or give me an error while my phone calls my wife.
So year, having the same "Hey Cortana" voice commands for 3 devices was a poor idea. "Xbox, Mute" worked fine. I mean, I do feel like Cortana does a better job of understanding what I am telling it to do, but couldn't it have stayed as Xbox commands rather than Hey Cortana? I could just turn it off on my laptop and be happy with it, but I actually use it for my phone and my xbox.
Imagine when people actually start buying Surface Phones (if that ever happens). What were they thinking?
Lucky sod, we have three Xbox Ones, two PC's two Surfaces and three Cortana enabled Windows phones in our flat, we have discovered the meaning behind the phrase "She who's name must not be spoken"3 more replies
New box is together. Windows 8.1 64-bit.
When I look at my drives in file explorer, a couple drives have multiple drive letters...
For example, my data backup drive, which is only one partition, shows up as drive "Int data backup (T(T(T" - unfortunately, it keeps changing the colon and closing parentheses to that goofy smiley face.
Same for a couple others... I've never seen this before in Windows 7, so what is this? Do I need to do something about it?
Also, in "Devices and Printers" from the control panel, I have FOUR occurrences of "DIRECTV2PC Media Server" and FOUR occurrences of "DIRECTV Mediashare Renderer"
Do they have anything to do with the multiple drive letters? What the heck are they for? And can I delete them?
It appears your PC is connected to a media Share network5 more replies
Slowly lost app's now have no control. Or admin privilege. The screen looks fake. There's drives listed I can't access. And every download was hijacked. Now theres no real Network or bios driver installed. after multiple attempts and no system functions available I want to use another computer and try to download virus software there. Noticed something strange happen and both laptops havea Dll bug long story short my Android, laptops, printer and router have all been hijacked and I do not know what to do at this point
I haven't seen or been able to find anything on something so expensive enedina have any other laptops that are accessible at this time so even doing it from my phone is challenging
I realize this is a forum for Windows 7, but I don't know where else to ask this question lol.
Earlier I made a thread about my mom's computer being unable to reinstall Windows 7 after a factory reset. I think I've found a possible fix for this, but I'm not entirely sure.
I'm currently in the process of installing Windows 10 on my own computer via the Windows Creation Tool, and I noticed that it gave me the option to not only install W10 on my own computer, but another's through a Flash Drive as well.
So my question: after I've installed Windows 10 on my own computer, would it be possible to also put a copy onto my flash drive to install Windows 10 on my mom's computer as well? And if so, can I bypass the product key requirement to get to the desktop? I've got some code that I used to grab my own product key in order to install Windows 10 for myself, which I can also use to retrieve my mom's product key if I can get to her desktop to open Notepad.
I've never booted a computer via flash drive, so I don't know whether or not I can do this. I don't have her product key, and I can only get it if I can access her desktop (unless there's another way, because the product key on the back of her laptop is too faded to read).
Thanks in advance!
Once you've made an install flash drive (or DVD or iso) from the Microsoft site, you can use it to upgrade any number of qualifying computers (genuine activated Windows 7 SP1) to Windows 10 without needing a serial. It must be the correct edition ie Windows 7 Home Premium needs a Windows 10 Home flash drive. A sneaky upgrade attempt from Home to Pro will appear to work, but won't activate (you will prob be nagged to buy the correct serial sometime in the future).
re : booting from flash - I found that the upgrade didn't work in that scenario. I had to run setup.exe from within Windows 7. If a clean install is your goal, once Windows 10 is installed, you can boot from the install media (flash, DVD etc) and install again, deleting all partitions. You don't need a serial for this, because MS 'remembers' the hardware and activates it accordingly. If you do this, all data and apps are deleted.
Edit - if your mom's computer isn't actually running, you won't be able to upgrade it to W10 for free.
I am using my phones 3G to type this and it's a real nuisance since I cannot research information for essays and other important aspects that I need when studying for my A levels.
Anyway, it started last night around 11pm, everything died and I thought it was because of the bad weather.
I woke up to sunshine however the internet was still not working.
The router is a SuperHub 2 and it had no problems up till now, the lights for 5Ghz and 2.4Ghz are flashing and so are the other lights on the router - this the router is working.
The problem is the connectivity, I use my laptop, iPhone and computer all together when studying and playing games. All of which has the same problem. All have the 5 bars connectivity however they all say "no internet access" and no response from the DNS servers.
What is the problem then?
What I've done:
- I have release and renewed the IPs
- reset router numerous times
- turned on: off router numerous times
- fiddled with wires to make sure they're plugged in.
- turned on and off computers and laptops.
- set IvP4 to automatic.
- waited hours.
- went onto the Virgin Media router page via 192.168.0.X. Then I started the router up in factory status, starting I up a few times.
How do I fix this nuisance? I need the internet now, for work purposes.
Please help, since it's affecting me and my family members and all of our devices.
Does the Virgin Media router page give you a status of the WAN?
We had a bad storm last week and it took a few days after power was restored for Comcast to repair their lines.
I was able to get to my router, but the WAN address was 0.0.0.0 - can't get there from here!
If you have a WAN address, turn everything off (no power) then
power up your cable modem, wait a few minutes for it to cycle through what it cycles through
power up your router (if seperate) wait for it to cycle through what it cycles through
finally power up your machine and check the network status on the Virgin Media router
If you don't have a WAN address, report the outage to your provider. They probably already know about your area, but a call never hurts.
So my household needs to upgrade internet. Our internet speeds are slow (3mbps) and my mom works at home with various computer programs as she processes documents and claims.She cannot deal with the lag in her internet speed caused by my brother playing his new xbox one (which I've heard takes up the internet like no other) and me browsing the net all at once.
I'm asking because I don't know about internet speeds, our current plan in our area is the best one (I know 3mbps is not alot) but apparently that is the highest service AT&T U-verse provides.
So I'm wondering if anyone knows what would be a good speed for internet considering all of this, it know this isn't exactly a computer problem but I wouldn't know where else to ask.
Thank you for your help!
So I'm wondering if anyone knows what would be a good speed for internet considering all of this, it know this isn't exactly a computer problem but I wouldn't know where else to ask.Click to expand...
No problem, this is the right section to ask in.
Now I'm a bit confused as to whether your potential Internet speed would be 3Mbps or 5Mbps (conflicting information in title and post). Either way, you're right that that isn't very much bandwidth. Your mom should be able to do her computer work assuming the file transfers she performs involve smaller Word, PDF, and text documents. The primary factors here will be what you do while web browsing, and the Xbox One connection.
You likely won't be able to play Xbox and stream video well simultaneously - that isn't even taking into account possible file transfers of your mom's.
I'm not sure where you live, but most developed areas in the United States have Internet speeds much higher than this. I recommend doing some research online to find out if this truly is your only option. With modern Internet content, I would say ~10Mbps is a good minimum recommendation for a pleasant browsing experience.
If you cannot find/get an Internet connection with increased bandwidth, then you all may need to dedicate times for certain activities on the Internet.
I've googled this endlessly with no result and I'm guessing it isn't possible but I may as well ask.
My laptop has one audio/mic port. I'm cheap and had a splitter laying around, my headphones, and a set of ear buds with a mic on it I combined to use as a headset.
This works fine, however, since the sound output is being split to both my ear buds and headphones, it doesn't sound as good and some things are faint, which isn't good for gaming.
Is there a way to manage my audio devices so that my ear buds is mic only and no sound, and my headphones get all the sound? I've found no options in Windows, just playback (speakers) and recording (mic). I assume because it's only one jack it isn't, but it can't hurt to ask.
I have a dell dimension 2400 that I think is going kaput. I've had to format one drive twice and an alternate drive once (merely to test that the first hard drive wasn't the issue.) My primary problem and reason for my first reinstall was an OS hanging issue probably due to some hardware conflict somewhere - various solutions such as safe mode, repairing install and fixboot would not work (scared to use fixmbr without first checking all my options.)
Three soft formats later and both of my hard drive installs are ticking my ethernet adapter, among other devices, with a question mark. As an example, I've used the OEM disks provided for the 3com 4011 integrated ethernet controller, selected the appropriate driver and ended up with a code 10 on it. I boot to safe made and check all the hidden devices for obvious conflicts but no such luck, there are no other NICs installed on my PC and the rest cannot be removed ("you need this device to boot" message on uninstall attempt")
Does anyone know where I can find out which resources my device wants to use?
quick edit: it is XP
could it be a ghost device driver sucking up resources from a previous install?
question the third: HAAALP! according to the utility partition manager my system is in full working order (ha.)
many thanks for your gratuitous help.
I'm adding an everest report of the hardware for your viewing pleasure.
it can be viewed here:
I've read through a could of threads but have yet to find any answers for my problem. Basically my internet runs fine when a device is directly connected to my modem. However, when running through a router I get 2-10 second disconnects at random intervals on all devices hooked up to the router, be it wired or wireless. I've already tired three different router, all different brands, among other various things like updating/switch firmware and changing the router over to a new wall socket with no luck. I had my service provider come out and switch the modem, but that didn't help any. Any help would be appreciated.
what cable is between the router and modem - has this been changed ?
you mention "wall socket"
As you have made a lot of changes to the modem and to the router(s) - i can only think of cable
Before making each connection , do a powercycle - see how below
connect with a small cable between the modem and PC - and that works fine
then with a 2nd cable - do the same
now you have two cables that you know work on the modem
Also while in that configuration post an ipconfig /all - see how below
then using the same cables - connect from the modem to the router
and using the known cable connect the PC to the router
Now test again and see if this time it works
We would like to see the results from an ipconfig /all - post back the results in a reply here.
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.
If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the information above those entries
For Windows 8 or Windows 10
To open a Cm... Read more
When streaming Netflix, my computer is registering as a new device each time I play a movie. The Device ID is different when I check on all my registered devices (the only device that uses my account is my one computer). I have not changed any settings, reinstalled Windows, or made any drastic changes in the system. I do not use a router and am using Cox Communications as my ISP.
Does anyone know why this is happening? Does anyone have a solution?
For more detailed information, the original topic is posted here:
I was informed by the admin "Animal" to re-post in this forum.
Thank you for any help.
Have you contacted Netflix about this issue?1 more replies
Is there a script to run remotely that will return sleep setting results for multiple pc's on a network? I know we can manually check each PC but was wondering if there was a faster and easier way.
Hi and Welcome to TSF!
Are people changing them?
How would you want to distribute the patch?
You can do so with a simple batch program.
I noticed a problem in my keyboard recently, but i'm not sure if it's really on the keyboard, and might be in the windows or software related. The problem is that the keyboard randomly starts freezing, it's hard to explain with words, basically the keys do not operate in the way they should, i notice this problem usually when i'm playing games, where my "W" that should move my character forward continuously. does not, instead of doing what it's supposed to do my character goes forward while freezing along the way. When i unplug, and plug it again on the USB port, even on a different one, the keybord start to operate normally again, but randomly shows this problem from time to time. It's not only with the "W" key, was just an example.
I noticed something yesterday, i don't if it's supposed to be that way, and i can't find any information about, it's that on device manager it shows multiple devices on the keyboard section, when the device is connected, as it shows in the image below:
One more thing, is all of them looks like the same thing, but i'm not sure if they really are, image below:
If i uninstall all of them, except that one that i marked with purple, he is the 4th one in the first image, the keyboard still operates, i'm not sure if the problem is fixed by that, cause it does not happen all the time.
Now that i described everything, i want to ask 2 questions:
1) Showing these multiple devices is normal? Cause i plugged anot... Read more
A big hello to everyone. This is my second time coming here, albeit with a different problem, and one that is a lot more annoying!
A week or so ago i starting getting occasional redirects and popups to pages that start with "syndication.exoclick" whenever I browsed the Internet with Google Chrome. I cleaned it (deleted all browsing data, signed out of the browser and back on) and it was fine for a day or two. As of today, the problem has gotten much worse. I keep constant redirections to pages starting with "adfoc.us" - over half of the tabs I open are immediately taken over and redirected. Worst part is that it now works on Internet Explorer as well. It is also worth mentioning that I am not getting these redirects only on my desktop, but also on my Nexus tablet as well. The problem seems unconnected to my router, as today I've used my tablet on a completely different Wi-Fi half across town, while still getting the problem. I've ran TDSS cleaner, the Microsoft Security Essantials, Malwarebytes AntiMalware, which all reported 0 problems. I've also reinstalled Chrome, to no effect.
As for the redirects, they ranged from Aliexpress to random cam sites, but now the adfoc.us started showing up, it only displays the adfoc.us page detailing how the system works (with a really annoying voiceover too) and nothing else. It doesn't even allow me the option to press the "Back" arrow, seems like it literally closes a tab I wanted to open and opens a new one with adfoc.us on ... Read more
Here's the Attach.txt as well. I forgot to click the "Attach this File" button. >.>4 more replies
This is so odd. I'm running Windows XP SP2 on Dual core INtel with 1 gb memory.
I've installed a front USB panel that has 4 ports in front and 2 more on the PCI card which it's attached to. (added on peripheral).
I can deal with the "this device can run faster if plugged into a 2.0 device" but what is really frustrating is that if I plug in 2 or more USB devices. At least one of them won't work.
This computer is in my family room and wirelessy networked to my other computer in another room. I use a Motorola USB device to connect for the purpose of printing stuff off the printer in the other room.
If I have too many USB devices plugged in - there doesn't seem to be enough power to allow the wireless connection - resulting in not being able to print.
This isn't the only issue. I have some software that requires the USB "key" in order to work. If I need to use that software using the "key" and then I need to print something from that particular software to the remote printer - I have to save it to my desktop firsti - then disconnect the "key" and then I can print.
Do I need a bigger PS? I have a 500W now. I thought that would be big enough. Perhaps the USB issue isn't related to that at all? Is there some way to regulate how much power is assigned to USB devices?
Since my computer is in a desk against a wall - it's very difficult to plug and unplug stuff into the rear slots. Hence the install... Read more
16 more replies
I am using Windows XP,HomeEdition Version 2002, Service Pack 3.
AMD Athlon 64 X2 Dual Core Processor 3800+ 2.00 GHz, 3.43 GB of Ram
Firefox version 22.0.
We have noticed recently slow speed on our PC, Cell phones, laptop all connected to our wifi.
On this pc we have a search site called mysearchresults.com show up whenever we open a new tab. There also an ASK.com search bar and a search bar that has the icon of the mysearchresults.com site. Occasionally we get a small window pop up in the lower right corner ( where the taskbar is) that will play a video commercial.
This is also new, within that last few months these two things have started.
We notice alot more pop ups while on you tube, the video is jumpy while trying to scroll to the bottom of the page. When you go to click on a link it seems to move forcing you to click on a pop up.
I tested at speedtest.net and got a ping of 245, download speed of .19 and upload of .42. I've been noticing a lot of 404 issues (im not sure what you call it...it says it cannot find where I wanted to go and leaves me at a search bar that says its powered by Bing. (http://us.search.yahoo.com/404handler?src=toolbar&fr=slv502-tyc&type=&url=http%3A%2F%2Fwww.google.com%2F)
Mostly though we get...
Server not found
Firefox can't find the server at att.yahoo.com.
Check the address for typing errors such as
ww.example.com inst... Read more
One computer per topic please. Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result. Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop.* Double-click mbam-setup.exe and follow the prompts to install the program.* At the end, be sure a checkmark is pl... Read more
Ok im not quite sure where this question should be posted but i noticed the problem when i was playin games so this is where i chose...
Basically i've got different sounds coming from my speakers and my headphones. I have teamspeak coming through my headphones but my game sounds and other sounds from the speakers. I cant seem to find a way to make them all come from the headphones.
Using windows 7 32 bit
Thanks in advance
Have you tried changing any settings within the Windows Sound panel?
Start > Control Panel >Sound > Playback tab
Look for Speakers...right-click and Disable
Look for the Headphones....right-click and Set as Default Device
I am having major issues at the moment and have been trying to fix this for the past couple of months.
my primary laptop a Tobisha was playing up a while ago when I plugged my apple iphone into it and was transferring photo's, it was taking ages to respond and then came up with error corrupt image.
I tried again and it said the file was already there and if i would like to replace it? I saw the file size and it was 100 X bigger than all the others.
I got a little concerned and downloaded malwarebites to scan my computer (I had avg already installed and nortorns).
as time went on and a little bit of research online and fiddling about, the virus was not budging and had locked me out of admin rights.
I tried take ownership, downloading various programs to run and it kept overtaking the programs until i couldn't delete any files anymore.
I found an old laptop dell and tried to fix that one up (as that too had a virus)
I ran malwarebites on it and it removed somethings and i was able to get it going.
I was using an exeternal hard drive to back up my files from the tobisha and wanted to transfer them to the dell
when i noticed i lost admin rights on the dell also.
at this point too I was having strange things happen to my iphone, background app transfers and greyed out features with location services always on.
I tried deleting a heap of things on the dell after running some programs, it seems it now had the same thing as the other laptop.
I gave up trying to fix anythi... Read more
Sometimes I watch movies using HDMI output from my computer. When I connect the HDMI cable windows also discovers new sound device. I want to redirect some of outputs to the television so I can use its speakers.
For now, what I do is that I disable the internal sound card and system automatically uses HDMI then.
Thank you for any help
In many systems, when you plug an HDMI cable into the PC Windows will automatically set the HDMI as the Default audio playback device. If Windows is detecting a new device it suggests the Video drivers (usually where the HDMI audio is generated) may not be the correct driver.1 more replies
Okay, so I moved my wireless router to a more central location in my house (I got low signal in my room) and since then I've been able to connect to the network but only with limited access. Trying to connect to a webpage results in the "DNS lookup failed" error message (Chrome). My brother's computer had had the same issue, and the PlayStation 3 has had connectivity issues also, however I have been able to use my phone with the WiFi without any issues.
I've tried unplugging/turning the router on and off to no effect. Using a different router does not change the situation either. When I try to diagnose the network connection, it says that it could not identify the problem. Any ideas?
Both computers run Windows 8
My phone is a Nokia Lumia 620 running WP8
The WiFi status window states that IPv4 and IPv6 have no internet access
My computer uses a Qualcomm Atheros AR5B125 wireless network adapter and says it is working correctly. The adapter is set to work with IPv4/6. IPv4 is set to obtain IP & DNS addresses automatically.
Any help is greatly appreciated. Thanks!
For a Windows PC ...
Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If your only email accounts are free (Hotmail, gmail, etc.) try this direct link. If you need help with a screen shot see TSG Posting a Screenshot. FWIW to take screen shots with Windows 8 or 7 or Vista I prefer to use the built-in Snipping Tool.
Identify your network if it is not obvious.
Also show ...
Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.
Type the following command:
[Note that there is no space between the slash and ALL.]
Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.
If necessary use a text file and removable media to copy the results to a computer with internet access.
I've got an HTC One X, an ASUS Transformer and several Windows PCs that I use for business. Depending on my location I receive googletalk messages on any of those devices.
What I need is a software, like Trillian, that will save the chat history of my conversations online to enable me to access it from any device I choose. I don't want to check all devices if I wonder what a colleague wrote to me in the morning.
The problem with Trillian is, that it isn't optimized for the Transformer or any Pad in that regard at all (correct me if I am wrong). It forces me to turn the screen to "vertical mode" which isn't helpfull at all since the Transformer is in "horizontal mode", because of the attached keyboard all the time.
I would really appreciate your help and advice. To be clear: I am totally willing to pay money for such a software, but I don't even find one single alternative to Trillian.
Thanks in advance
The small office where I work has 1 wired desktop, 1 desktop connected over wireless, 2 laptops connected over wireless and two iphones that are always connected to the internet. Until about 12:45 pm EST the wireless internet was working fine, at that time the wireless went down. However, the wired desktop has had no trouble connecting to the internet. Please help, we need to be up and running and our IT guy has disappeared off the face of the earth! Thank you!
The router is a Cisco WRVS4400N. It is one MacBook Pro, a Toshiba Laptop and a Dell desktop that is connected by D-Link DWA-131. Its a Comcast X-Finity 56 MBPS connection. (we're really close to an airbase).
Reset or power cycle the router. Can you still detect the wireless network? If so, can you connect to it? If so, can you communicate with the router via wireless?
I have been using Netflix for a few months. What I have noticed is that I will reach my device activation limit (6 is the max, I believe) rather quickly--specifically, it will tell me I have reached it after streaming 6 shows/movies. Apparently, my computer is being registered as a new device every time I stream a new show/movie.
I am wondering why this is, and how it can be fixed. The only solution I have found is to deactivate every device I have registered with Netflix (which is just my one computer I use for streaming)--only then will it allow me to watch another show/movie. This is a hassle, and if this is the only way, then that is alright. What I am most interested in is the reason my computer could be registering as separate devices like this. I can think of a few possibilities:
-Computer is registering by a dynamic IP address set by the ISP (I do not use a router)
-Computer is registering as a new device by some other means
-Silverlight is somehow acting fishy (which this does not seem like a local problem like a program on my computer)
It must be noted that the device ID number listed on Netflix is different with each registration of a new device (even though it is the same device every time).
I am currently in Louisiana. I am using Cox Communications as an ISP. I do not use a router. I pay my own utilities (so this is not an aprt complex-specific problem as far as I can tell). This same issue occurred when streaming on a friend's Netflix account, so it is no... Read more
Should I re-post this in another forum that is more populated or that deals with problems like this?
Any help is welcomed.
I'll try to explain this as simply as possible... Currently, I have speakers, headphones and the headphone microphone plugged in. I'd like to record my Skype conversations using stereo mix, but stereo mix only picks up what goes through my speakers and not what goes through my headset. I've tried tinkering with the settings and haven't been able to get stereo mix to record what goes through my headset instead of my speakers.
How do I get stereo mix to record headphone audio instead of speaker audio?
For the past few hours, I've also been trying to get Audacity to record both stereo mix and my microphone. From what I've read, Audacity can't record two inputs at the same time, so is there a way to combine stereo mix and my microphone?
I'm using the latest Realtek HD drivers, if that helps any.
Thanks for your time.
You might want to check out VAC(Virtual Audio Cable). It is not a "free" program, so depending on you needs, it might help. here is a link to info about it:Virtual Audio Cable - Wikipedia, the free encyclopedia
and here is a link to download VAC:
Virtual Audio Cable - CNET Download.com
I used it myself to share music I was listening to over video chats. The program can be used in a number of ways. I no longer use, since I currently have a laptop with Stereo Mix, and that meets my needs just fine. Hope this helps.
Hi guys. I have my TV connected via HDMI through my video card to my computer and also run sound through my computers speakers with the onboard sound. Normally I just change the audio device before opening a program depending on whether I want it on the TV speakers or computer speakers. The problem is that sporadically when I select the device for the TV speakers it doesn't provide any sound and no combination of turning the TV on and off, changing the audio device back and forth etc will let give sound on the TV speakers (but when i change to the computer speakers it works fine). I can't seem to reproduce the problem either, it just happens sporadically and the only solution is to restart the computer.
I have vista 32 bit ultimate. Any suggestions?
I have a 20FB running Win 10 with a Logitech K810 Bluetooth keyboard that I've been using with a corded mouse without any problems. I recently purchased M557 Bluetooth mouse and now, intermittently, but consistently, my keyboard stokes are inaccurate, with multiple repeating letters and extra spaces. If I turn my mouse off, the keyboard again works fine. Disconnecting and reconnecting both devices did not solve this problem. The Lenovo System Update utlility indicates that the device driver is up to date. The Lenovo supplied device driver version is 18.1.1546.2762. Nonetheless, I was able to solve this problem by updating the device driver from Window?s Device Manager to Intel?s latest driver, version 19.0.1621.3340.More replies
So I'll try to keep this short.
I have a HP B209a-m that I have just gotten rid of and now am trying to remove all the software from my system. I've run revo and the issue still persists.
It gives me a device install path of ROOT\MULTIFUNCTION\xxx where xxx is a number. I have about 20-30 of these instances in my device manager and all have different install paths. I'd really like to remove these. I've run the HP L4 Uninstaller multiple times and still the issue is here.
I'd just really like to remove HP from my life.
Thanks for the help.
hello and welcome entfy mate try first backing up the registry Registry - Backup and Restore
See my pic AFTER you have backed up that registry but please do that the very first thing I usually make two copies in say the desktop and a document.
Let us know what if any HP software is there you can also check that entry named Printers.
The other day I was workigna t ym computer, when it started to show tell tale signs of HDD failure, and then would not boot, could hear thrashing and clicking etc when trying to read it.
I was pretty annoyed about that but I thought oh well its all backed up just need a new HDD.
So got a new one ordered all specs reccommended by the computer manufacturer, installed by a preofessional too.
*** was going well, new OS flying along nicely so I went to my external HDD to transfer some data. Uppon trying to open my 1.5tb external HDD I realise windows cannot read it, although it is shown in "device manager" as a usb sotrage device. My other lapotop wont read it, nor a mac, nor linux even with force boot command.
I then go to my emergency backup 320gb hard drive with a small fraction of my important stuff on it. this 320gb hard drive WAS readable when I installed my new HDD with OS on it, but I went to the 1.5tb first as it had more on. But now even the 320 GB hard drive cannot be read, by a selection of computers.
I then plugged by 8GB Nokia N95 in and now it cannot even be read.
I have tried chkdsk, macs reading all drives, linux force boot commands.
I am quite scared that my new 500gb OS hard drive will fail soon too but I dont know what is causing this please any help much appreciated.
Look in Event Viewer/System for any red marks that may provide clues.
I understand the initial drive failure. but the subsequent failures suggest a major problem with the computer itself. Power supply, memory IDE controller, motherboard?
A virus could do this. There may be some rogue file on the external drive.
Hi, I very much want to know the answer to this problem. My setup is simple. I am working with my Mobo's onboard sound card (Mobo is Asus M3A32-MVP Wi-Fi) and here's the thing. I see multiple devices in both Vista and Seven (have a dual boot) - I see the front headphone jack, the SPDIF, the rear audio port (it's 5.1 surround) and also an HDMI. I've just recently bought two bluetooth headphones and I have paired them and see them in the audio devices panel too.
Now this is what I want to do. I want to hear the audio on all the devices simultaneously. If I turn on the audio system (connected to the SPDIF) then I should hear the audio there. If I connect multiple Bluetooth headphones, I should hear the audio from my comp on any and all of them.
So, why can't I do this? Apparently this was the default behaviour for Windows in XP. That is, any audio played was available on all connected devices. Now, here in Vista and Seven we have a major downgrade in that we have to select a SINGLE audio output device as the "default" device and when a device is selected as such, the audio stream is SOLELY passed into it. THIS IS SO VERY WRONG! It is so illogical to do something like this in today's world of changing and evolving multi-media environments. I mean, what if my Mom wants to hear my music from the kitchen at the same time that I'm listening to it as I work on my desktop. She should be able to simply plugin and start listening to what I'm hearing! This is RIDICULOUS!
I ho... Read more
Our ISP has recently changed our router from Prolink H6300G to Prolink H5004N.
Our Prolink H5004N is wired to the phone line.
All devices connect to the internet via WLAN.
No devices are attached to the router via LAN.
The unusual problem is, some wireless devices connect to the internet just fine, others connect intermittently.
Below are the list of devices:
ASUS Notebook PCs x 2 (connect)
MSI Notebook PC (connect)
Apple iPad2 (connect)
LG LED SmartTV (connect)
Sony PlayStation 3 Slim (connect)
RedFox Netbook (intermittent)
Samsung Tablet PC (intermittent)
Sony XPERIA Smartphones x 3 (intermittent)
It is not that the red devices could not connect, they do so, but a very irregular and on/off internet connection.
I am stumped by the variety of devices that constantly connect and those that do not.
Does changing from G to N may in any way cause this?
All devices you listed are connected WIRELESS to the same Prolink H5004N?
Try to move these devices closer to the wireless Access Point (built in router). Just for a test
RedFox Netbook (intermittent)
Samsung Tablet PC (intermittent)
Sony XPERIA Smartphones x 3 (intermittent)
Does that fix anything?
I can connect to the Internet with my wireless router just fine, but only certain websites will load normally. So far, these include Google, Gmail, Youtube, Facebook, and Wikipedia. Most other websites just show that they are loading forever and nothing ever comes up. I've already tried power cycling/resetting everything.
As an example of what it says when I ping a website that doesn't work:
Pinging www.reddit.com [22.214.171.124] with 32 bytes of data:
Reply from 192.168.1.1: Destination net unreachable.
Reply from 192.168.1.1: Destination net unreachable.
Reply from 192.168.1.1: Destination net unreachable.
Reply from 192.168.1.1: Destination net unreachable.
Ping statistics for 126.96.36.199:
Packets : Sent = 4, Received = 4, Lost = 0 (0% loss),"
I also can't connect to Skype. Itunes doesn't respond upon launch, but only while I'm connected. It works normally while offline.
My phone has the same Internet problems while using wi-fi, but not while using data.
My Xbox One can connect to the Internet, but not to Xbox Live. When I test its network connection, it says "DNS isn't resolving Xbox server names"
What's also strange is that my roommate isn't having these problems on his computer and phone even though we use the same wireless router.
I didn't know which thread to post this topic in, thought this was the right one. Mods, if you think there is a more relevant thread to post this in, please make the necessary changes. Thank you. Onwards to my issue:
I just recently decided to dual boot my UEFI-based system between Windows 10 and Windows 8.1. Upon using EasyBCD to create a bootloader that only includes Windows 10 and Windows 8.1, I get this mess:
Can anyone help me figure out how I can get back a Metro-styled Bootloader that only includes Windows 10 and Windows 8.1? Thanks!
Go back into EasyBCD and delete the entries you don't want.6 more replies
Switched over the internet service provider to Time Warner. We are using the same router we have used before the switch (which was also with Time Warner service provider) and everything was working FINE before the switch. But now, with the new modem from service provider something is wrong -- My roommate is unable to connect her laptop, and her phone to the wifi even though the network is being detected. I can only connect to my laptop, which was the laptop I had opened to verify connectivity when the Technician was there. Also, my I-phone is unable to connect to the network even though it detects it. It's very odd considering we had the technician come out to resolve this issue in the first place. Could it be that the DHCP server has been turned off, so it's allowing only one device to connect to the one IP address on the modem?
Or do we need to delete the wifi networks off of our computers and other devices? My roommate tried that on her devices and still didn't connect. Please help.
Do you know if your new modem includes WiFi? Is so, when you tested the connection with the technician present, did they have you connect wirelessly to your existing wireless router or to the modem itself?
Assuming you are running some version of Windows on the computer that can connect, please go into the Windows DOS/Command prompt screen and run an IPCONFIG /ALL command. Then copy and paste the complete results of the command here.
I'm trying to set up something at work and am looking for ideas. I'm trying to get multiple Roku devices to connect to a single computer which can then take control of them all (about 10 devices per computer). I'm thinking about something simmer to PuTTY where you can just connect to the devices and they will show up on different windows and from there you can take over control. No idea if there is any hardware/software that will be able to do something like this. Does anyone have any ideas?More replies