Tech Problem Aggregator

Monitor blinking issue

Q: Monitor blinking issue

hello guys,

I bought a new PC two days ago along with Gforce 9600 GSO 384 mb DDR3 and I am running windows Vista. My problem is that when vista ask for permission to open any program my monitor blinks for a nano second( monitor turns black) otherwise the system is performing good. Is it the problem with the old CRT monitor or some kind of driver problem. My system configuration is written below.

Intel dual core 2.5 Ghrz
DG35Ec Intel mother board
Gforce 9600 GSO 384mD ddr3
windows Vista Home premium Sp1

thanks and waiting for your help.

A: Monitor blinking issue

Hi harmonSmith and welcome to Vista Forums

This is normal for some systems, depending on the hardware and drivers. When the display comes back on, is it dimmed with the UAC dialogue box present? If so, then this is known as the Secure Desktop. This is not the desktop itself, rather it is an image of the desktop which contains no clickable content, save for the UAC dialogue box.

4 more replies
Answer Match 67.62%

I cant get my pc to boot to the bios, all I get is a blank monitor everything powers up except the screen display, so I tried putting in a pci video adapter and stilll the same result this board has a on-board vga slot, I disconnected everything and still the same result and suggestion..
 

A:A hardware issue blinking monitor...

6 more replies
Answer Match 54.6%

I need some help. I have acomputer monitor that is roughly 10 years old. THe monitor last night decided to suddenly turn off and the power button started blinking. I unplugged the power to the monitor and let it sit overnight. This morning I went and plugged the power back into the monitor and pressed the power button on it. When I pressed the power button the button started blinking again. I have never had a monitor die like this and I would like to know why it died and if it can be fixed. Some more info is that i had only been on the computer for less than 2 hours. I have not spilled anything on the computer, the vent is completely uncovered, and the computer is in good working conditions according to the mannual. I need to know asap please. The tower still works perfectly fine it is only the monitor.
 

A:Monitor is black and the power button on the monitor is blinking

If you could try the monitor on another PC, that would confirm the monitor is faulty. In any case if the monitor is bad and considering its age, it would be best to just replace it. It would not be worth fixing.
 

2 more replies
Answer Match 54.6%

I'm not very knowledgeable when it comes to computer, ah, specs (or finding information about the one I have)... so I don't have much for you to go on.

Computer is a Dell, with Windows XP Home Edition. Monitor is LCD.

A few days ago (around Wednesday morning) my monitor began to click on and off. The screen would flash black and the light, next to the on/off button, would flash from green (on) to yellow/orange (off). At first it wasn't that bad. When I switched pages on the internet, scrolled, or highlighted something on the page it would flash.
It steadily got worse, going from internet pages to flashing on and off right when I turned the computer on, all through the loading and welcome screens.
I thought maybe it was just the monitor, so I switched it out and hooked up my old hp pavilion mx70 monitor.

That monitor worked perfectly fine with my old tower, but when hooked up to my new one it... Erm, got 'static-y'. It looked like an old TV that had a VHS tape in the player, being re-wound. I know that sounds odd, but it was like spikes from the side of the screen surging inwards. I thought it was because the monitor was so much older than the tower. Soon the static got steadily worse, and I used it for about a day before it got to be too much.

I switched to Safe Mode with Networking on the hp monitor, to see what would happen, and it was fine! No static. Today, I switched back to my LCD monitor and put that into Safe Mode with Networking and no b... Read more

A:Solved: Monitor or Tower problem? Monitor is blinking on and off.

Video card is busted. When in safe mode, the video card's drivers are not loaded, so the card does not function at "full blast". It will not cause trouble because of that.
Dell model would help finding a replacement, but it can well be assumed that there's a PCI-E 16x slot for add-on graphics. This would be a cheap replacement in that case: http://www.newegg.com/Product/Product.aspx?Item=N82E16814121302

This is all an assumption on the most propable cause. The problem could also be your power supply or motherboard, but those are pretty unlikely.
 

2 more replies
Answer Match 50.82%

Hope someone can assist w/ this.
I accidentally right clicked w/ mouse and hit
a different resolution button. Now my monitor is blinking so fast I can't even click on anything.
I can't stop it to view it either. This is on my desktop which is windows xp.
Any solutions? thanx.
(p.s., I called my normal tech place and their only advice was to bring it into the shop.)
** I did unplug and re-booted several times but w/ the same result.

A:Blinking monitor

Try booting up in Safe Mode and choosing a resolution. Note: your usual resolution might not be listed in there, but right we're going to focus on getting rid of the blinking.

18 more replies
Answer Match 50.82%

I am currently on a Dell dimension 2400 PC, with windows XP home edition service pack 2 that my mom got in 2003, but the monitor has started blinkling, what happens is the screen will suddenly go black & then start blinking, with a faint light in the bottom corner, I can see the screen contents between blinks. This occurs when; I have been away from the computer a while, upon start up & sometimes when I am in the middle of something. so far what I have done is jiggle/wiggle the cord that plugs into the back of the monitor, & it usually brings the monitor back but it it is taking more jiggling the cord than ever to get the screen back. The computer seems to be ok, watched the diagnostic lights at the back of the computer upon start up, all green no red. but the monitor is very irritating. Is it the cord? before I started up today, I tried unplugging the cord that plugs into the monitor & then re plugged it back in, then started up the computer, all was well for a while, there was no blinking at start up, but then after I was away from the computer for about 10 minutes, moved the mouse & it started blinking again. The monitor is a 15 inch LCD, should I get a new cord for it? will I be able to find a new cord for this monitor? it came with the PC in 2003. Do I need to get a new monitor? is the computer dying? I need some quick help as it is hard to do my work with the monitor, want to solve the problem as I cant keep wiggling the cord that plugs into the back... Read more

A:blinking monitor

7 more replies
Answer Match 50.82%

Im working on a friends Dell XPS 410.
Ive installed a new HDD and performed a fresh install of the OEM Vista.
During bootup, or when the computer is trying to do something .. Like recognize a connected external ..
The monitor flashes off several times, for about a second .. The on duration is variable.
Im using one of my monitors .. Not his, So this eliminates a monitor problem.

This is one of the same problems as was in his old HDD and System.

Any ideas what may be causing the monitor flashing ??
 

More replies
Answer Match 50.82%

I have a viewsonic monitor that when i plug it in and turn it on, keeps blinking on and off. The way i used to be able to fix it was turning it of and back on manually until it came on, but now it does it automatically and never turns on. It seems like there is a bad capacitor because it turns on, and you can see the screen for like half a second, then the backlight turns off, then the whole screen turns off and this repeats. So i took it apart and noticed that on the power supply board several capacitors were bulging at the top, so i ordered replacements from mouser and soldered them in. Unfortunately it still blinks. I think if i found the same model monitor that had a cracked screen but working electronics, i could swap them out because the screen seems to still be fine. any ideas on other things i could try?
 

More replies
Answer Match 50.82%

I have a Princeton LCD monitor, model VL1918, that's about 3 1/2 years old. It has started blinking at me even when it's not connected to the computer. In such condition there's a window that appears saying " NO SIGNAL". which flashes for a count of two, then disappears for a count of nine, then on again for two and off for nine.

Is this curable and at what cost?

Thanks for your thoughts.
 

A:Blinking Monitor

6 more replies
Answer Match 50.82%

I don't know the brand of my computer... I don't think it even has one. It was built for me by my husband Who is in another country for about four months (so it is now up to his uneducated wife to fix any computer problems that may occur)

My problem started when I tried to hook my scanner up to my computer. (my scanner was not USB) Anyway after I got it hooked up and I turned my computer back on the monitor just blinked at me. Absolutely nothing else happened. No power in the tower. Nothing. So I unhooked my scanner and started it back up... and it still did the same thing.

I have checked all my cable connections and even reinstalled the card to my monitor. And I am now all out of ideas. So if I can't figure this out then I will either have to hire someone to come down and look at it (which I cannot possibly afford) or wait four months for my husband to come home.

I am very open to suggestions. Please someone help me.
 

A:My monitor is blinking at me... again

7 more replies
Answer Match 50.82%

I have a HP w2408h monitor that has had blinking on and off problems ever since I began using it with my Surfact Pro 3.  I ran across some 2114 posts on this forum where I found the following solution . . . Step 1. Unplug the power cord from the back of the monitor and the wallStep 2. Hold the power button down for at least one minuteStep 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)Step 4. Press the Menu button on the monitorStep 5. Navigate to the Factory Reset option and select it I followed those steps and , so far, my monitor no longer blinks (but its had periods like this before so time will tell) My question is about step three.  Why can't I use a power bar or surge protector?  Why does it have to be plugged directly into the wall?  

More replies
Answer Match 50.82%

Brief description:

Upon log-in, my monitor begins to blink irregularly. After several minutes of occasional blinking, the screen will simply go black. Strangely, this blink-to-end-all blinks leaves the monitor in *sleep* mode - I can tell because its power-button light is now orange.

What I've done: Switched the monitor, to ensure that this isn't a monitor problem (it isn't - it happened with both monitors). No new software has been downloaded recently. Do I *need* to call geeksquad or something, or is there a way to determine what is causing this? I'm guessing video card but I know so little about hardware that I've got no reason to support that.

Any suggestions on further diagnosing the issue, let me know. I'm a bit busy at the moment, but in an hour or so I will try playing audio to determine if it will continue after the screen goes off / into sleep mode.

Thanks for the help!
 

A:Monitor Blinking

If the display is ok until you get into Windows it could be a Video driver problem, boot into Safe Mode (tap F8 after the Post text screen and when the safe mode menu appears press Enter) and see if it still flickers then.
 

3 more replies
Answer Match 50.82%

Hey

Okay I have a problem. For sometime, whenever I started my computer, my screen would blink for a while but would eventually become stable and everything would be fine. But now, while I was using the computer, it suddenly went off. Now when I turn on the monitor it keeps blinking that is it comes on for a second and then goes off and then comes and so. It's impossible to use the computer this way. What should I do?

Thanks!

A:Monitor Blinking

Short answer is try another monitor. It does sound like a monitor issue. Let us know if that's it or not, and we'll go from there if needed.

2 more replies
Answer Match 50.82%

Hi!
Yesterday I replaced the old case of mine with a new one . I have put everything back to its place , turned on the PC and on brown colour I can see that the monitor is blinking , making annoying waves .
In the old case I never had issue like this . Tried 70/72/75 Hz with smaller resolution but the upshot was the same , the monitor was blinking .The monitor is Benq G2222HDL and the VGA is Gigabyte 5770

A:Sometimes the monitor is blinking

Ok , I have noticed that when the VGA isnt under stress everything is fine .Tomorrow I will clean the VGA and will post if the issue is still persist.

9 more replies
Answer Match 50.82%

my laptop screen starts to blink suddenly,, it was working fine since yesterday but now , its blinking every 3 sec ,,how can i stop this?

A:blinking monitor

If your laptop is still under warranty I suggest contacting the manufacturers, as it could be a hardware issue. If it isn't, try updating the graphics drivers first.

Regards,
Reventon

1 more replies
Answer Match 50.82%

I have windows vista professional and when booting up my P4 system my monitor goes right to the desktop quick but blinks for about twenty minutes before it stops blinking. I can restart it at that point and it will not blink when the desktop is displayed. if I let my system go in sleep mode for awhile and move the mouse to display the desktop again it blinks for about twenty minutes before it stops again. long as I'm using it this doesn't happen. Can you tell me what the problem might be?

Thanks in advance for the support help,
expressmypc
 

A:Blinking Monitor

To see what hardware you have in that PC please run this on it and post the resulting text into your next reply :- http://static.techguy.org/download/SysInfo.exe

Any chance you could connect a different Monitor, just to see if the fault still happens or not ?
 

1 more replies
Answer Match 50.82%

I just bought an hp pavilion desktop 510-p020. I hooked it up to my hp w1907 monitor which is about 7-8 years old. Everything was working fine until I left the system idle. When I returned to the computer the monitor was dark. I hit one of the keys to awaken the computer. Instead the monitor just kept blinking on and off. I tried restarting the computer with the same result. The system itself is starting up so I don't think the modem is the problem. When I click the power button on the display, it turns on for a second then turns off. In the meantime the system startup is progressing. I have tried changing the power cord, checking all the connections, and plugging the display directly into the wall, all with the same result. Anyone have a clue as to what's going on?

More replies
Answer Match 50.82%

i recently installed a brand new system in my car that consists of a Micro ATX Mobo - AMD Athlon2 - 8 gb DDR2 1066 - dc-dc power supply -windows 7 and a computer monitor. the computer runs perfectly but the monitor i am using will go black for a second or two at random intervals. the dc-dc power supply has a 20 pin and a 4 pin for the mobo, power sata for the hard drive and another flat 4 pin that i am not using. since the lcd i am using needs 12 volts i connected it to the 12v and ground from that flat 4 pin off the ps. this setup was fine when i set it up on a normal psu from my other computer.. is it possible that the dc-dc psu cant handle the load from the lcd? also i did set this up temporarily in my car to see if it would work and it did. although at that time it was not in its native resolution. the native resolution of my monitor is 640x480 at 60hz. windows 7 for some reason will only allow me 59hz no matter how i try to change it. does anyone have some idea as to what the blinking is caused by?
 

More replies
Answer Match 50.82%

I have an LG CRT monitor 2 years old. Since the past 15 days, my monitor has developed a problem. The monitor begins to blink continuously on and off each time switch on the PC. The rate of blinking dies down gradually , and finally the monitor shows the display. It is taking nearly 10 minutes for the monitor to stop blinking and show the display.

And, the monitor behaves properly if I do a system restart immediately. But, the computer again blinks continuously if I switch it on after a gap of 2-3 hours.

Please help me out to get out of this trouble. Is there any damage to components inside the CRT? or is it just the power cord trouble?
 

A:Blinking Monitor

Yup, it sounds like the high voltage rectifier and it's not worth fixing. Time to go LCD.

Courtney
 

1 more replies
Answer Match 50.82%

Ive been having a problem with my monitor blinking / flashing a black screen every 5 min. It always happens when i change screens for example: load a full screen game, refresh the screen, etc... Everytime i start up my CPU the screen blinks. Then i have to turn off the monitor, wait like 10-15 seconds, then turn it back on for it to work. When it does come back on, the graphics are all messed up. Could this be my monitor? Or does it have something to do with my graphic card? Any help would be appreciated. If possible a solution =) Thanks
 

A:Monitor Blinking

Screen flicker is normal when you change screen resolutions or settings (which more than likely happens when you play a full screen game). However the "messed up" graphics are not normal.

To test this we will isolate the variables. Here your variables are the graphics card and the monitor. You can: 1) attach the monitor to a known working computer. If the screen still acts funny, you know the monitor is at fault. If not, then it is probably your CPU's graphics card. Or you can 2) attach a known working monitor to the problematic CPU. If that screen acts funny, then you know it is your graphics card at fault, or at the very least not the original monitor. If that secondary monitor does not show any symptoms, then your original monitor is probably causing your problems.

Good luck!
 

1 more replies
Answer Match 49.98%

Hi,I have a 6 yr old HP w15e LCD monitor, it's pretty old. But recently it's showing some weird things. Whenever I turn on the power supply to the monitor with or without the video input from CPU, the monitor screen keeps blinking on and off ( I think there is two seconds delay in between on and off).I tried different power cables , but still monitor blinking. So help me to folder this thing.Thank you.











Solved!
View Solution.

A:LCD monitor screen blinking on and off

Hello @shan678, I understand that your HP w15e LCD Monitor keeps blinking off and off and you are seeking assistance in getting it fixed. I am providing you with some steps you can try below:Step 1. Unplug the power cord from the back of the monitor and the wallStep 2. Hold the power button down for at least one minuteStep 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)Step 4. Press the Menu button on the monitorStep 5. Navigate to the Factory Reset option and select itIf the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. If it does I think it would be best if you contact HP Technical Support for repair options.Thank you for posting on the HP Forums. Have a great day!

3 more replies
Answer Match 49.98%

I'm new and not real computer savvy so bare with me my monitor went black but my light is blinking green constantly whether I unplug it and plug it back in still the same result I took another monitor with same power cord and same PC and plugged it all in and it works fine so I don't know what to do next help please accer 19" 2002 model 1706 A
 

More replies
Answer Match 49.98%

I have been looking into this for days reading various forums online.

I have been using my laptop which is connected to an external monitor for months with no problems, then one day the external screen started blinking on and off occasionally (only for a second). If i use the laptop screen everything works fine, but when i try to use an external monitor the blinking problem happens, (i have tried 2 separate monitors). It seems to blink at random times, like everytime i change songs on my zune program, or if i skip through videos streaming from the internet.

I am running windows vista home premium 64 bit, on an hp pavilion dv 2700 notebook with a geforce 7150m / nforce 630m.

any help would be greatly appreciated
 

A:blinking external monitor

Model of monitor? Could something completely unrelated to your laptop...
 

2 more replies
Answer Match 49.98%

I'm working as a student assistant at my university. The computer that I use at the desk there is a Dell GX 280. When I start the computer, the monitor works fine until I reach the login screen with the "Press Ctrl+Alt+Dlt" box, at which point the monitor goes black for a second, then returns, then goes black and so on. The monitor power button remains green throughout the hissy fit. This can last anywhere between five and ten minutes, regardless of if I log on or not.

Considering that the computer belongs to the university, I can't take it apart and look around inside. Despite this, if the problem most likely involves hardware, I can notify someone to (hopefully) replace it. What do you all think?
 

More replies
Answer Match 49.98%

I downloaded several add ons presumably to improve my internet browsing. But then, my laptop slowed down. Then lately, a flashing notice appeared that another program is attempting to replace myspace as home page browser or something like that. Since then, my monitor kept blinking every few seconds.

A:Laptop Monitor Blinking

sounds like you may be infected

http://www.techsupportforum.com/secu...oval-help.html

10 more replies
Answer Match 49.98%

This 2-3 year old Princeton external monitor worked fine on my old Dell laptop. Since connecting to my new MacBook Pro (OS 10 Leopard)...sometimes it is fine for several hours, but if I leave and come back and "wake it up", it might be fine or it might be blinking off and on at a steady interval. Sometimes it works to unplug everything and replug it and tell it so 'Detect Displays' in System Preferences (again!), but sometimes it just keeps on blinking off and on - very annoying!

Any help is much appreciated.
MacNewbie
 

More replies
Answer Match 49.98%

Hello..
I have problem with my LG Flatron L246WH monitor..
This is actually problem CLICK
Capacitors seems to be ok..
Pic 1
Pic 2
Any ideas??
 

More replies
Answer Match 49.98%

Hello. So yesterday, I was playing a game, and my monitor went black, even though, power supply was good and power button was on. Restarted my pc, repluged power supply/cables, but it was still blacking out.
So I plugged in another monitor, and it started blinking in random periods of time (power button is still on always), it went black completely few times, but I just turned off and on again, but now, it blackouts for couple of minutes every few minutes...

So where's the problem? My computer is new, bought it not even a month ago, and it was all fine...
 

A:LCD monitor's blinking/blacking out

16 more replies
Answer Match 49.98%

My computer:
HP Pavilion
Processor            AMD A8-5600K
Memory              8 GB
System Type      64 bit
Use both IE 10 and Firefox 24
My Problem:
My computer is blinking!  It blinks about every three minutes.  The whole monitor blinks.
Each time it blinks the cursor turn from a pointer to a busy for about one second.
If a pull down list is open, it will close on a blink
If I am filling in an answer  pull down the pull down will close and clear on a blink.
Certain games such as Peggle Delux miniaturize to the tool tray each time it blinks.
If I am writing in Word all letters typed during the blink disappear but not the ones  typed before and after the blink
Not every time but about every 10 blinks, Firefox errors out and closes
 
I have Norton Antivirus running.  Also use Speed Up My PC and CCleaner on a daily basis.
I have tried a different monitor and the blink still happens.  

A:Computer monitor blinking

Hello and welcome to Bleeping Computer.First, if you could do the following this would help us to better serve you.Go to Piriform's website, and click the big button.Click Download from Piriform.com (the FileHippo link requires an extra click). Or if you want to use a portable version of Speccy (which doesn't require installation), click the builds page link and download the portable version.You will now be asked where you want to save the file. The best place to put it is the Desktop, as it will be easy to find later.After the file finishes downloading, you are ready to run Speccy. If you downloaded the installer, simply double-click on it and follow the prompts until installation is complete. If you downloaded the portable version, you will need to unzip it before use. Right-click the ZIP file and click Extract all. Click Next. Open up the extracted folder and double-click on Speccy.====================Once inside Speccy, it will look similar to this (with your computer's specifications, of course):Now, at the top, click File > Publish SnapshotYou will see the following prompt:Click Yes > then Copy to Clipboard====================Now, once you are back in the forum topic you are posting in, click the button. Right-click in the empty space of the Reply box and click Paste. Then, click Add Reply below the Reply box.Congrats! You have just posted your specs! Thank you and I'll be waiting for your next reply.Bruce.

2 more replies
Answer Match 49.98%

I know there have been posts on this subject before but none similar to mine.
Having recently purchased a Samsung 2693HM monitor and using DVI input, when the resolution is wound up to 1920 x 1200 every now and then the monitor screen will go blank for a second, timing is quite random. I know it is not the monitor or cable as have experienced the problem with another (two) monitors only not nearly so severly as they would not display the same resolution. I have now wound the resolution down and the problem has ceased. Interestingly it doesn't happen when using an analog connection but at high resolution that is terrible.

Although everything points to the graphics card is it possible that the 350W power supply may be a cause? The system is fairly well loaded.
The computer consists of MS-7246 (Intel 975X Platinum) MB
Saphire X1600 Pro 512Mb graphics card PCI-E
Two Serial HD
Several printers and 2 DVD drives and one USB DVD drive, two external USB HD

I think I shall have to get a new graphics card but some of the new ones seem extremely power hungry so a new power supply looks inevitable unless anyone can suggest a decent graphics card that is greener. I do not use the PC for games but do use CAD & graphics programmes that are probably fairly demanding.
There is of course the possibility that someone may know the cause of the problem and suggest a solution that doean't require any hardware mods. Although I have tried rolling back the drivers and got rid of the AT... Read more

A:Solved: Blinking monitor

16 more replies
Answer Match 49.98%

My monitor will blink randomly, and usually come right back on, but sometimes it will be off for 10 secs or more.

Hardware:

umm... not sure about the motherboard, I'm not at home. But it has PCIe, DDR3, Socket 775
550W PSU (came with the case, not sure what exactly...)
Intel Q6600 Quad Core
Corsair 6GB DDR3 RAM
NVIDIA GeForce 9800GTX hooked up via HDMI to a 32" HDTV.

Now, the only thing that has changed is the mobo and ram. I haven't updated the BIOS on the mobo yet, but I suspect that may be the issue. I have the latest drivers and updates for vista.

Anyone had problems with a blinking screen before? I've been told it may be that the video card is overheating... that's not it, because this happens under no load at all.

I've also heard it could be the PSU, but I had no problems like this for 4 months before I replaced the MOBO and RAM.

I appreciate any help.

A:Problem with monitor blinking

To the top.... any ideas?

10 more replies
Answer Match 49.98%

Hello all, my current irritation is "blinking".We get freeze,blink,reopen, with partly messed up page, quite often, especially doing emails and adaware scans, but also apparently randomly. We have up to date Norton anti virus, Ad-aware,Spybot and Spyware blaster. Could this be some well hidden spy prog taking "snapshots",or am I being paranoid? I also installed the latest Nvidia driver for the monitor but it made no difference either way. This is a system that did have lots of junk on it (teenagers!!)-but Im trying to take good care of it in the last few months. Another idea is maybe the monitor is on its last legs? (about 21 months old, lots of use)--any ideas? love and peace.
 

A:Blinking XP monitor-Spy snapshots?

10 more replies
Answer Match 49.98%

a.) the monitor's light is just blinking.
b.) no beep sound.
c.) when I try to disconnect the cable from the cpu, the monitor do display a disconnected image. But when I connect it again, there's no display again and the light just blinking
d.) all fans are running.
e.) its a CRT monitor


Your response will be highly appreciated, tnx!

A:HELP: Monitor just blinking and no display

what are you running
video card
cpu
m/board
ram
power supply
brand
wattage

check the listings in the bios for voltages and temperatures and post them

what happens when you try safe mode

1 more replies
Answer Match 49.56%

I have a Toshiba Satellite Laptop P105-S6187 Windows Vista Home Premium.
My brother has the exact same one, and when he goes to log into any site using a password, He gets this 1/4 inch strip ( red, blinking) around the outside edge of the screen.
Now, Here is the story.... While His ex wife and her TEEN age kids were living with him, They had some program put on the Laptop, and his home computer, that records every keystroke. (Trying to monitor the kids.) Well things got bad and She and the kids have moved back east.
He had caught her snooping through emails, bank accounts.... Well you get the idea.
I have looked every where I can think of to figure out what might be causing this flashing red ring, to no success. I have never noticed it happening on my Lap top.
He is afraid that Someone??? Has gotten into his computer and is monitoring his stuff.
Could this be some kind of system warning?
Warning not to use his passwords?
Any help would be appreciated.

More replies
Answer Match 49.56%

my 12 year old son discovered the wonderful world of "internet ladies" and so I ran a clean up scan to get rid of anything he may have done. Now, my monitor is blinking like crazy and I don't know what or how it happened. 5 hours ago, everything was fine, now it's blink city!Any help would be appreciated!!!! Here is my hijack this log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 6:40:14 PM, on 1/27/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2800.1106)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\Common Files\Real\Update_OB\bak\realsched.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE
C:\PROGRAM FILES\OUTLOOK EXPRESS\MSIMN.EXE
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://home.knology.net/index.php
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Local Page =
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page =
O2 - BHO: Adobe PDF Rea... Read more

A:Spyware problems, monitor blinking now

16 more replies
Answer Match 49.56%

I have two computers, win xp on one 2400 box and win 2000 on the other 600 box, both are patched together boxes with 15 inch monitors. I inherited a 17 inch monitor that requires a double male vga cord (not hardwired?) It will bootup and remain on for about a minute then the monitor will go black and the off on light will blink and make sort of a clicking noise about once per second continuously. I tried a new vga cord no change? What is the problem could it be compatibility or just an internal fuse of somesort? Works the same way on both boxes, go figure?
 

A:Monitor light blinking- no picture

Possibly your video card? If you have a video card in that computer try swapping it out with your other system and test it in there, and vice versa (if you have a card in your other computer put it in the one that isn't working and see if it works). If you get the same error when you insert that card into the other computer then that would be a good hint. Or if you have onboard video, well......try putting in a card from another computer and see what happens.
 

3 more replies
Answer Match 49.56%

monitor screen on laptop black has a - but does not blink. How to fix check etc?

More replies
Answer Match 49.56%

The light on my samsung 793MB monitor keeps blinking and nother apears on the screen. I tried using a different monitor with this computer and it still dosnt work. I also tried a different video card and still light keeps blinking and nothing appears on the screen. I suspect it is ethier the cpu or the motherboard but I have no way of know unless i go to compusa/bestbuy ect, and pay them $100.
The computer was custom built by me last year and just stopped working. There were no recent hardware or software changes. Please help ive been trying to figure it out for over 2 months and almost forgot all the fans and lights and hard drive and drives are running.

Specs:
Intel 3.4ghz
Samsung 793MB(17 inch)
Ati 700X graphics
D925XCV (motherboard)
Lite on Cd/Dvd write/rewrite
Enermax 470 watts power supply
2 gb of ram
80gb western digital hard drive(caviar edition)
and that all thats important
 

A:Green Light On Monitor Keeps Blinking

if you are getting no output onto monitors there are only two troubleshooting sources left:

1. you have a bad/loose cable

2. your video card is messed up.


Since you have isolated the monitor as not being a problem, the error is either in your cable or video card.

swap out with another video card to see if that is the problem
 

6 more replies
Answer Match 49.56%

So, recently, while playing Mass Effect (the first one), my monitor usually blinks while I'm playing. It suddenly went black, then normal again, then black,... just like how you rapidly press on/off on your monitor.

I tried lowering the graphics to almost minimum, but the problem still exist, albeit much less frequent. I have no problem playing Team Fortress 2 at high settings though.

My specs:
Pentium(R) Dual-Core CPU E5200 @ 2.50 GHz (2 CPUs)
Memory: 3328 MB Ram
NVIDIA GeForce 8800 GTS
Display mode: 1440 x 990 (32 bit) (60 Hz)

Anyone knows why the problem exist? And how to solve it?
 

A:Solved: Monitor blinking while playing

11 more replies
Answer Match 49.56%

External monitor shows an odd behavior:
When no apps are present, it works perfectly fineOpera, VLC and some others seem to run fineHowever, screen blacks out sometimes, as if it was changing resolution. This happens on certain occasions, for example when I press CTRL (!) in Powerpoint (if PP runs on that screen), or stochastically (keeps on doing this in Visual Studio)

I am running Windows 8.1 on MacBook pro 13" (2010 mid, 320m graphics). I have an external Asus VW202 monitor attached via 3rd party mini DP to VGA adapter. Main screen works fine. Graphics drivers are updated. No issues occurred on Mac OS X. It also seems that only max resolution (1680x1050) is affected. Any others do not cause trouble.

More replies
Answer Match 49.56%

I'm helping a friend fix their computer monitor and I'm a little stumped!

They've got a Samsung SyncMaster 930B monitor with constantly blinking green light and no images displaying, just a black screen. Pushing the power button on the monitor does nothing, not even turn it off. Unplugging and replugging it also does nothing to the blinking light. The screen will not turn on, not even during reboot. The hard drive fan seems to be running and computer seems to be processing during reboot. I even tried hooking the monitor up to a laptop to see if it would work, with no results.

The computer itself is a three year old HP Pavillion a1340n with Windows XP Media Center Edition 2005. It has Norton Antivirus. Unfortunately, I cannot get in to see if there is anything else wrong with it without lugging another monitor over from somewhere else and trying to hook it up.
 

A:Help! Blinking Green Light on Monitor

If, as you indicate, you've tried it on a known working system and it still doesn't work then the most likely culprit is the monitor itself. If you can find a reasonably priced repairer then get them to fix it. It usually works out a lot cheaper, tho', to buy a new one.
 

1 more replies
Answer Match 49.56%

I saw this ad on craigslist for a free monitor.

The following description follows:

Quote:
The model is a Dell UltraSharp 1702FP. I don't know exactly what's wrong with it; about two weeks ago in the middle of use, the screen suddenly went black and the LEDs started flashing in a pattern.
any ideas?
 

A:monitor went black with blinking LEDs

7 more replies
Answer Match 49.14%

so I just did an OS format on my Aspire 4930..
I formatted Vista to XP because of obvious reasons.

but, after I installed all my drivers proper,
everytime at startup, my monitor would blink once to black,
but only about one second, even less..

it would not blink again for the rest of the session though.
but, when I uninstalled the VGA Intel driver to see if it had any effect,
the monitor didn't blink. it seems that the driver is the problem, yeah?

but I tried installing two versions and they're just the same.
what I want to ask is:

1) will it have any long-term effect?
2) is the monitor adjusting to anything; refresh rate, etc?
3) can I repair this?

thanks very much in advance..
 

More replies
Answer Match 49.14%

From last few days my PC has developed a display problem. (which I believe it to be related to win xp rather than monitor)On switching on start button the monitor remains blank only. The power on indicator turns green and continuously blinking @ 3 secs. As usually I do when any problem encountered with my pc, searched for a solution in the net and found a discussion at one place one with similar symptom. It says to switch off the mains and keep the PC start button depress for few secs and then to go for normal start. I find that It works ok, but the problem is not solved for ever. Next time when I go for normal start same problem appears.

If any body has a better solution pl suggest. my PC is HP with LCD monitor, graphics on board. OS is XP Sp3.

A:Monitor blank, power led blinking green

So on a cold start up - if you just press the start button - monitor won't display anything. But, if you hold in the start button, you are able to get a display?

I just want to make sure I am understanding correctly.

4 more replies
Answer Match 49.14%

We have new Optiplex 7040. This model has two displayports and one HDMI. VGA Monitors are connected to one of the displayports and to the HDMI using the approved adaptors.
After two months of use the monitor attached to the HDMI began to blank every so often for a few seconds then come back on again. Whatever the user is doing it blanks and appears, sometimes every ten seconds or so.
I've eliminated the monitors by swapping them, so the source is the HDMI connector or the HDMI to VGA adapter. I've put the latest Graphics drivers in place. The system has shown no more problems with the monitors connected to the two displayport adapters.
So I have two questions:1. Are there any known issues that could cause theses symptoms on the 7040?2. Are these the symptoms of HDMI to VGA adapter failure?

More replies
Answer Match 49.14%

Hi All
My DELL XPS 2720 has started to blink, every 5 mins or so, my monitor just switches its self of for 3 seconds or so at a time, this is really annoying.  Any advice?

Regards
Andrew

More replies
Answer Match 49.14%

I used a compressor to blow my computer out, removed the CPU to blow out the the Heatsinks etc.. poped it back in place and now it doesnt work. Powers on fully but the monitor power light just blinks, i also get no mobo beeps. I checked to see if i had a bent pin on the CPU which i did i bent it back in place with a razor put it back in place correctly. same problem.. any ideas?
 

A:Powers on, no beeping blinking monitor light.

7 more replies
Answer Match 49.14%

my monitor works just fine in 1280x1024 resolution without nvidia drivers yet installed, but rapidly blinks after installing latest drivers. even at low res like 1024x768.
and then i set it to 1440x900 it stops blinking but the height is so small while width is just fine it looks like res for a wide screen,.
my question is how to set the resolution to just 1280x1024 without this annoying blinking of monitor, i am used to this reso since i am using xp.
nvidia geforce 7300 SE/7200 GS
Generic non-PnP monitor

A:blinking monitor after installing nvidia driver

Hi r3n311,

Welcome to Vista Forums!

Assuming you are using the correct drivers for the card and your version of Windows, I'm extremely tempted to suggest if the old NVidia drivers worked fine, just revert to them: Restore a driver to its previous version even if it is generally recommended to use the most updated drivers available.

Why are you updating the drivers? Because you do so periodically and noticed new ones were available or because you were having some other problem (if so, what)? Where did you get the new drivers - directly from the NVidea website or elsewhere (if so, where exactly - the website URL if you have it)? If you got them from Microsoft Update, then definitely revert to the prior version.

If you insist on using the new drivers and they are appropriate and obtained from a reputable source (the NVidea site or the computer manufacturer website are the only two you should consider), then download them again to make sure you didn't get a corrupted file and install them again (and triple-check to make sure they are appropriate for the card and your version of Windows). Then go to Start / Control Panel / Device Manager and verify that the drivers are properly installed with no errors and show they are working properly.

Try to play with the settings in Control Panel / Personalization - changing themes, color/appearance settings, DPI settings, resolutions and anything else that can be configured to see if that helps. If not, check with the computer manu... Read more

3 more replies
Answer Match 49.14%

JUST BOUGHT A NEW SYSTEM. WITH ALL NEW PRODUCTS. INSTALLED 2.8 INTEL PROCESSOR, AMPTRON M266A MOTHERBOARD, 512 RAM, 120GB NEW HARD DRIVE, NOT OPERATIONAL YET. HAVE TRIED ALL SUGGESTIONS ON THIS SITE, NOTHING WORKS. SYSTEM STARTS UP FINE, I SEE A GREEN LIGHT ON MONITOR FOR 3 SECONDS, THEN SEE POWER SAVE FLASH ON MONITOR SCREEN, THEN A CLICK FROM THE MONITOR/MOTHERBOARD, I GUESS AND THE MONITOR STARTS BLINKING GREEN, NO BEEP OR ERROR MESSAGES, CODES NOTHING. I HAVE CHECKED OUT EVERYTHING FROM THE FRONT PANEL SETUP, CLEARING THE CMOS, UNPLUGGING FROM ONE MONITOR TO ANOTHER. THIS EVERYTHING IS RUNNING, AND SOUNDS IN PERFECT ORDER, JUST NO SCREEN, THIS MOTHERBOARD HAS ONBOARD VIDEO, I HAVE A VIDEO CARD, BUT ADDING A VIDEO CARD DOES NOT MAKE A DIFFERENCE. ANYONE GOT ANY CLUES TO WHAT THE PROBLEM MIGHT BE. THANKS. MY EMAIL IS [email protected] AND ANY HELP WOULD BE GREATLY APPRECIATED. THANKS!
 

A:Help!!!! All I Get Is A (stupid) Green Blinking Monitor Light

13 more replies
Answer Match 49.14%

I have the above system conected via a One link + using the display port.the external monitor frequently blinks on and offusing DP to DVI, but it also happens with VGAHave updated all the drivers.suggestions?












Solved!

Go to Solution.

A:Yoga 260 Windows 10 blinking external monitor

Hi dougdykman
 
Can you please specify your full Thinkpad model number and the model of OneLink dock that you are using.
Some Thinkpad and some OneLink dock models has some firmware (BIOS) update to improve compatibility.
 
Regards

3 more replies
Answer Match 49.14%

Hi:

This evening I decided to reboot my personal computer, which uses Vista. Up until this point it had worked fine, including earlier today. Every time I attempt to reboot it, it starts by bringing up its normal white screen about being a gigabyte motherboard. It then never shows any of the data involved with the reboot - instead, it goes straight to a completely black screen, and stays on it indefinitely. There is a blinking green light on the monitor. As the light blinks, there is a faint "clicking" or "flickering" sound.

I have attempted multiple computer restarts, adjusting the monitor cords. None of it has had any effect. There is no error message, at least not that I've had the ability to see. As I cannot see anything happening on the screen, I do not know if this is purely a graphics problem or if there is also a problem with the computer.

Thanks in advance for any advice...
 

A:On reboot, black monitor & blinking light

Is it posting first of all?
Have you re seated your graphics card?
What are your system specs?
 

2 more replies
Answer Match 49.14%

Allright i've got a really odd problem.
Months ago i made this thread:
BSOD...again

Now the problem has been solved and the computer worked fine...until now.
My old RAM broke so i changed with 2x512.
RAM worked fine 1 month but now if i shut down the computer or restart it the PC simply won't start. (no beep sound) The Monitor will act like the computer isn't on
If i let the PC off for 5 minutes it will magically start again only to reboot minutes later and then not booting again.
I don't think this is a RAM related problem as it worked fine and even with the old ram i got some problems (freezes,restarts) Oh and sometimes the computer will freeze forcing me to restart.

This problem occured today.Yesterday i got a random restart so i figured it was something wrong but i didn't payed much attention.

I guess the restarts are BSOD so i unchecked the automatic restart.

EDIT:Yep it is an BSOD...caused by driver sptd.sys (Daemon tools? I don't have it installed though...only Alcohol) as showed by BlueScreenView

Specs:
Motherboard:ECS P4M800-M7
2x512 RAM DDR
Ati Radeon 3450
Pentium 4 2.66Ghz

I really don't think this is a software problem...it doesn't mke any sense.Oh and the RAMS are tested with memtest.

A:[SOLVED] Computer won't boot.Monitor blinking

Hi NokiGP,

Please extract the dump file from C:\Windows\minidump\, RAR/ZIP it down and attach it to your next post. When you've done so I'll have a look through the information and see if I can find the fault.

4 more replies
Answer Match 49.14%

I'm not sure if this is a new problem or not as side of monitor was not visible before - I just moved the pc to a new location so now I can see it. Anyway, it is a blinking light that sits right above the on/off button. I am not sure what the icon that accompanies the blinking light. it  is in the same location. The icon looks like a "can" - maybe it is something related to disk drive.Thanks for any thoughts.

A:Blinking light on side of monitor - Inspiron One.

ritkit03,The blinking light that looks like a "can"is the hardrive activity light.A hard drive activity light is a small LED light that illuminates whenever the hard drive or other built-in storage is being read from or written to.Knowing when your computer's hard drive is being accessed is helpful so you can avoid pulling the battery or unplugging the computer while the operating system is still accessing files on the drive, a mistake that can cause corruption of important files.A hard drive activity light is sometimes referred to as an HDD LED, a hard drive light,or a hard drive activity indicator.

1 more replies
Answer Match 48.72%

I have been scouring and trying all the "tricks" I have come across to no avail. My issue is as follows:

Five days ago after running a Virtual Machine (Ubuntu) on my laptop, something caused a complete system hang (or that is what I recollect). When I rebooted the laptop, lo and behold, splash screen, then blinkin' underscore forever.

The currently comatozed laptop is:

Sony VAIO BX297-XP
Win XP Pro SP3
1x 200Gb Hitachi Travelstar 7K200
1x 500Gb Seagate ST9500420ASG
2 Mb (1x2Mb) RAM (Samsung DDR2-SDRAM PC2-5300)
all other specs are standard for the laptop.

I know it is old, but it has traveled the world and been unfathomably resilient and saved dozens of other systems from failure. As I am reluctant to redo everything again (father, I have sinned and "forgotten" to backup since x-mas; but it received a full boot drive cleansing, by format, 7 months ago).

Any pointers are greatly appreciated. I have tried mbrfix, mbrboot, surface tests, file structure tests and more, yet still that annoying screen. Have had a dual boot running Kubuntu but it was not in use when this happened.

My fingers are crossed.

A:Another blinking cursor issue

If you have booted off of the XP CD and gotten to the Recovery Console and typed chkdsk /R and pressed enter, and that didn't help, and you have then typed FIXBOOT and then FIXMBR then you will have to try a Repair Install.

7 more replies
Answer Match 48.3%

When my IBM T84H is plugged in and the power button is pressed, regardless of whether it is plugged into a computer or not, the indicator LED on the front of the monitor blinks green over amber every second and no image displays. How can I fix this?
 

A:IBM T84H Monitor light blinking green & amber

8 more replies
Answer Match 48.3%

Hey all, really hoping somebody out there can help me out. I am having one hell of an issue.

First, my computer specs:

Processor: Intel Pentium D Processor 950 w/ Dual Core Technology 3.4GHz 800MHz FSB
Operating System: Microsoft Windows XP Home Edition with Service Pack 2
Power Supply: Alienware 650 Watt ATX 2.0 Power Supply with Active PFC
Motherboard: Alienware NVidia nForce4 SLI X16 Motherboard
Graphics Processor: 256MB PCI-Express x16 NVIDIA GeForce 7800 GT
Memory: 2GB Dual Channel DDR2 SDRAM at 667MHz - 2 x 1024MB
System Drive: High Performance - 160GB Serial ATA 3Gb/s 7,200 RPM w/ NCQ & 8MB Cache
Storage Drive: High Performance - 160GB Serial ATA 3Gb/s 7,200 RPM w/ NCQ & 8MB Cache
Primary Display: Samsung SyncMaster 1100DF 21" CRT Display - Black

I built this computer as a gaming computer about a year ago and I have never had any issues. I have had maybe a total of 5 total lock-ups in Windows until recently.

Last night I went to play Rainbow Six: Vegas and after about 30 seconds my computer just Locked Up - no control whatsoever. I rebooted and here is where things started to get weird.

At the Windows XP logo there is some vertical blue bars that are about 2-3 inches long and about half a cm space in between each. There is roughly 10 of these bars that go across my whole screen. They look kind of like static, or what you would expect something "bad" that you would see upon booting a PC.

I tried the game again thinking oh... Read more

A:Monitor light keeps blinking before log-in screen, very strange pixels

May be an overheating issue. Are your internal fans clean and free of dust. Are they working properly?
 

7 more replies
Answer Match 48.3%

I think this is a video card error but am not sure. I did restart my computer in safe mode and it works fine this way. I did update my driver but it didn't help any. I am getting a full black screen that sits there for 3-7 seconds then you see the internet explorer page then when I try to search or go anywhere theres the black screen again. I only put the computer in safe mode to see if it was the monitor or not. Ive never had this happen before. Please help!
 

A:Windows XP black blinking monitor/NV4_disp error

11 more replies
Answer Match 48.3%

Hi everyone!

As you probably can tell I am new here. I really don't know very much about computers except the basics.

I just bought a new system from someone off Craigslist. I know it was probably a mistake but I am crossing my fingers that it wasn't. The guy seemed petty decent and let me play with it at his house and check it all out. It is a Sony Vaio desktop and I don't know much about it except that it is way nicer than my junk box from the year 2000. The specs that he gave me are:
Sony Vaio
Intel Pentium 4 CPU 3.6GHz
2GB RAM
ATI Radeon X800 XT Platinum Edition graphics card
Windows XP Media Center Edition SP3
200 GB hard drive
DVD burner
Internal TV Tuner
Dual DVI-D monitor inputs
5.1 Channel audio card
22" Samsung LCD monitor
Wireless keyboard and mouse
Remote control (for using Windows media features ie windows media player or for use as a DVR)

Now, having said all that I am now having a major issue. It might be pretty simple but for someone like me it is driving me nuts. Everything worked fine at his house. No problems what so ever. I didn't hook it all up right away when I got home because it was very, very dirty and I wanted to clean it off. I used a whole can of monitor wipes to clean everything down. I was very careful about where I cleaned and how. So it sat for 24 hours without being connected. I plugged it in last night and everything worked fine. I went into "Add Remove Programs" and removed Google Chrome as... Read more

A:Monitor starts blinking and then loses signal after startup

6 more replies
Answer Match 48.3%

Have a 1702FP Dell monitor (17" flat panel, has both DVI and VGA connectors) that went slightly mad.

If it's plugged in, the power light is blinking orange (twice rapidly, then a pause off, then twice rapidly, then a pause, repeate), and the selection lights (DVI vs VGA) are blinking (#1 on, #2 flashes twice briefly, #1 on, etc-I don't know which is VGA and which is DVI.). The screen is blank.

Pushing buttons has no effect--can't turn it on or off let alone any of the other settings. It doesn't matter if the computer is on, if the monitor is plugged in to a computer (tried both home built PC and Mac), or if the video cables are attached to the monitor. It acts the same, as long as power is connected.

Any hope of returning this to sanity?
 

A:Dell FP1702 monitor-pretty blinking lights

6 more replies
Answer Match 48.3%

Hi

Im new here so sorry if this is the wrong place to post this.

Here is my problem:

I have just recently purchased a new Philips HDTV (32") and I have connected my pc to it via hdmi. I use a dvi-hdmi converter via the DVI port on my graphics card (NVIDIA XFX GeForce GTX 260).

The screen blinks and changes to black for a second usally displaying no signal or unsupported format in the top right hand side of the screen. Then it switches back to normal. The blinking happens randomly but never takes longer than a few minutes to happen.

I have all the latest Nvidia drivers installed.

One more thing I had a 32 inch tv before this one and it worked ok. It had issues with the text being blurry and it ended up blowing .

But any help would be really appreciated!

Thanks in advance!
Jawn
 

A:HELP! Using HDTV as monitor, screen is blinking black then normal again!

10 more replies
Answer Match 47.88%

GAH!!!!!!!

COMP:

DELL DIMENSION 4600i
Here is the documentary from Dell on it: http://support.dell.com/support/edocs/systems/dim4600/en/4600/sm/specs.htm#1084976

Somehow I knew this would happen! So I got my 1 GB of RAM I've been asking questions about and finally got it, my 512's are in separate slots and so I pair them together and so bank 1 is full, I go to bank 2 and put in my 1 GB, it fits snugly, I go to turn on my PC and NOTHING! All that happens is the little green light flashes on and off yellow. So, I go back in and I take the 1GB out, at this point frustrated. I left the 2 512's paired together, the PC turned on, or apparently so, the light was green, but, the monitor refused to do so. I put the 512 in the separate bank like nothing ever happened and it booted up.

When I booted up I got this "System Configuration Utilities" crap and I didn't really read it, it suddenly happened after this happened. Is this the problem? EVEN IF the 1GB was bad, it still refused to turn on even with the 2 512's, they had to return completely to their original spots before turning on. Do I need 2 512's instead of this 1 gig? Is there no problem with the RAM but my damn system not letting me change it, this "System Configuration Utility"?

Also, the RAM does work for this system or is supposed to at least. The seller had 4600 listed on the compatibility sheet, it met the requirements, I.E. PC3200, 184 Pin, Unbuffered DDR SDRam.

Ple... Read more

A:RAM ISSUE - Yellow Blinking Light on PC?

9 more replies
Answer Match 47.88%

As the title says... i am having this problem from yesterday morning when i opened my laptop after about 3-4 days and what i saw was this annoying thingy!
i just bought this laptop around 2-3 months ago... the model is HP Notebook - ac101ne and came with Windows 10 built-in
href here hectic thing is i have tried nearly every single thing which i found on YouTube or on other tech forums... the solutions given in them were reactioned with 'satisfactory comments' meaning they worked; but in my case they arent!
i logged in with Safe Mode but dint work... the blinking stops for a while and then starts again and even its still on; while i am 'typing all this' :(
i have uninstalled and reinstalled the display drivers too and also unchecking the Services (the most common solution which i found) but NOTHING is working!!!
also i dont have any Problem causing apps installed like iCloud or Norton etc.
Here are the specs:
href here images[/url]
looking forward for a Right enough Solution :{
the
[url=
[url=

A:Windows 10 blinking screen issue

Did you reboot after unchecking the services?

1 more replies
Answer Match 47.88%

Hi there,

I just purchased a Dell Studio XPS 1640 with Vista Home Premium 64 bit software. I downloaded the latest itunes and quicktime to my computer. After installing, I play my m4v's and mp4's and I get this blinking black bar on the bottom of the player itself. It spans across the whole player (not the computer screen) and about 2 inches in height. Any ideas? Help!

Version downloaded: 64 bit version of itunes 8.1.1 (included quicktime 7.6)

Errors: There was a corrupted file error upon original startup of itunes 8.1.1 but I did not play any videos at the time. Once I noticed the blinking black bar on quicktime and itunes I immediately uninstalled and downloaded the itunes 64 bit version again. Still the issue occured, but no error upon start up like the previous install.

A:Quicktime Help! (Blinking black bar issue)

With more investigation, I found a solution, though I don't know what it means, but it stopped the blinking black bar!

What I did:

On QT player it self I went to:

The top menu tabs and clicked "edit" next to "file"
click "Preferences" then click "QuickTime Preferences"
click the "advanced" tab under QT preferences.
Halfway down on the advanced tab you'll see a section heading for "video"

You'll have options for Safe Mode or DirectX. You could enable safemode which got rid of it or you can disable Direct 3D video acceleration under DirectX.

Now why this worked I'm not sure, possibly someone out there could answer that for me? I have an ATI mobility Radeon HD 3670 vid card with 512 mb of ram. My vid card has the latest drivers.

Anyhow, maybe this could help someone else? Who knows! but that's what I found!

2 more replies
Answer Match 47.88%

Hi I made a thread yesterday regarding a minor PC problem I had while trying to install windows XP on my uncles PC the problem was solved thankfully.

I now have an even bigger problem of my own with my PC.
I turned my PC on in the evening and the monitor screen was blank and displayed a blinking orange light, the fan does come on. I doubled checked the wires to see if any were loose but everything is inserted correctly.

What’s weird is the PC that I was installing windows on yesterday was doing the same thing but once you turn it off and turn it back on it would be fine and load windows.
But my one is not even doing that, there is nothing wrong with the monitor has I have brought it recently and I also checked the PC using my brother’s monitor and the same thing happens.

Once I finished installing windows on my uncles PC I turned my PC on and watched highlights of a soccer game so it actually was working last night. But I have no clue as to what has happened?
Can someone please help me?
 

A:Monitor Blinking Orange Light, Windows/PC wont start up

10 more replies
Answer Match 47.88%

Hello there i got this problem my computer started by indicating error(PRI Master Hard Disk:S.M.A.R.T Status Bad,Backup..) and not loading the OS Win 98 just a screen written Win 98.I then removed the hard disk(Fujitsu MPF 3102AT) and checked it on another computer i got the same result,when i placed back the hard disk so that i could upgrade the OS to Win XP,my monitor would not show anything.The power light would light up green but after a few seconds it start blinking green.The CPU is running on P111.Pliz help.
 

A:Monitor showing a blinking green light and screen is black.

Welcome to TechSpot, adad



adad said:



(PRI Master Hard Disk:S.M.A.R.T Status Bad,Backup..)Click to expand...

That says it all - your hard disk drive is failing (S.M.A.R.T. = Self-Monitoring Analysis Reporting Technology).
 

6 more replies
Answer Match 47.46%

Hi,

I have an external drive that was working fine till today(Simple Tech 250 GB USB Drive). I had to restart the hard drive and now my computer does not recognize it any more. I have tried different USB ports...even tried with my lap top, but it is not recognized. I could not find this under my computer>device manager>

As expected, I have lots of stuff in my hard drive and it would be a nightmare to think about losing all that When I switch on the hard drive, there is a solid red light and a blinking blue light. Is there any way to correct this?? And more importantly, if the hard drive is a goner, any reasonable ways to recover the data??

Thanks in anticipation!
 

A:Issue with External Hard Drive-Just Blinking

First off, I suspect you'll have to remove the physical drive from the USB enclosure and connect it to a desktop machine as a secondary drive as the next step.

It's quite possible the USB enclosure has died, which is actually more common than the drive dying. If so, all the data is still there. If you connect it directly and can't access the drive, then we'll have to discuss recovery options.
 

3 more replies
Answer Match 47.46%

hello all,
wondering if you can help me with an HP dv1000 (actually 1520us) problem i've recently been having regarding the battery and charging.

it seems that the battery isn't charging well. here are the symptoms:

1. when the laptop is plugged in AC, and the battery is installed, the "battery" icon in the system tray blinks from a "plug" to a "battery" icon...the "plug" icon does not have the lightning bolt symbol on it. it shows the "plug" icon, then blinks a "battery" icon briefly, then goes back to a "plug" icon, quite regularly (like every 2 seconds).

2. if i remove the battery and use only AC power, the laptop works fine.

3. as soon as i install the battery, the blinking thing happens. that means that the battery takes very long to charge, as it's only getting charged during that brief 1 second when the icon changes to a "plug" symbol (note, it's a plug symbol alone, not a plug-with-lightning-bolt symbol).

4. jiggling the power cord around the power jack area does not make a difference.

5. if i substitute batteries with a dv4000 battery (same, except it's 10.8V instead of 11.1V) the same blinking thing happens.

any ideas?
 

A:Dv1000 strange battery blinking issue

Check and reset the power settings in the control panel. These settings may have been corrupted
 

3 more replies
Answer Match 47.46%

I bought new laptop 500-15ISK Laptop (ideapad) 2 months back. Last 3 days I'm having following issues. This is frustrating while I?m logging in every day. I need your help to fix the issue # 1 as top priority. Your help is really appreciated. Booting issue ? Keeping blinking while booting (for at least 5 to 10 minutes) Update issue ? I have updated the system each time I shutdown. Still showing ?Update and Shutdown? message.

More replies
Answer Match 47.46%

I bought new laptop 500-15ISK Laptop (ideapad) 2 months back. Last 3 days I'm having following issues. This is frustrating while I?m logging in every day. I need your help to fix the issue # 1 as top priority. Your help is really appreciated. Booting issue ? Keeping blinking while booting (for at least 5 to 10 minutes) Update issue ? I have updated the system each time I shutdown. Still showing ?Update and Shutdown? message.

More replies
Answer Match 47.46%

Dear sir/mam ,
When i try to restart my computer my monitor goes blank with green light blinking continuously, i have 1 GB Ram , core 2 duo processor E4600 ,Asus 31/33 bit motherboard , 250 GB Hard disc with around 20 GB space for C drive for windows installation. And LG 17 inch monitor , Now even i am not able to install windows 7 because when i try to install windows7 (press any key to boot from CD/DVD) monitor goes blank with green light blinking continuesly. Same problem occurred with winxp sp3 even though there is no such problem in winxp sp2 or lower versions of winxp. Plz help me as soon as possible.....

A:my monitor goes blank with green light blinking continuesly when i restart with win7

Try the monitor with another system.

What video card do you have? You mention XP SP2 & earlier XP versions work OK. How old is the video card?

- Reseat video card
- Make sure video cable is good
- Swap out video card; try another

Regards. . .

jcgriff2

`

7 more replies
Answer Match 47.46%

i  just ran an powercfg /energy command in command prompt and this is the generated .html files in c:\windows\system32
can somebody help me fix this im using windows 8 pro with media center
i have a problem too when sleeping my laptop and when awaking it the lock screen opens then it blinks every 4 to 3 seconds then i cant log in maybe this is a problem to powercfg /energy how can i fix this?
 
 
thanks!
appreciate it
 
also i cant log in to my account when awking my laptop from sleeping i have to remove my battery again...it just blinks every 3 -4 seconds......anyone?help me plss?
 
the report file .html
  energy-report.html   32.92KB   1 downloads
 

A:powercfg /energy errors and blinking monitor after awaking laptop from sleeping

You already have a topic on this issue that was moved to this forum, from the Windows 7 fourm. To avoid confusion I am closing this one. Please continue in your original topic here: http://www.bleepingcomputer.com/forums/t/510658/help-powercfg-energy-27-errors-how-to-fix-this/

1 more replies
Answer Match 47.04%

Hi guys,

I'm running XP on 2 y/o system and never got any problems with it.
got 2gb ram, nvidia 6200 amd 330+ and external usb 1tb drive as my backup disc.
I used to play WoW and thats where i first noticed problem: sound/picture freezes for few secs then unfreeze then freeze/crash.
I came out to the desktop after reboot and same thing started to happen. Each time i rebooted the system screen blinking to black then finally freeze. Same thing happened in safe mode - frozen on login screen and display some junk then messedup sort of blue screen.
I d/ced USB drive and running virus check atm and looks steady so far but its a matter of time till that happen again im afraid....
Is it possible power issue with usb hdd? how comes it was fine before? Is it possible video card issue? memory? cpu? ....plz help

/cry

Peter
 

A:Solved: Weird issue with blinking screen and freezes

OK. Quick jump to BIOS then realized that +3.3V feed is ocassionally going to "fail" - so my PSU is getting old and tired. Before I decided to buy new one, I disconnected one of my CDROMS (got 2) - also checked with Sandra 2009 : power @ 3.3v went from 2.70 to 3.31 hence all good at the moment.......

cheers
Peter
 

1 more replies
Answer Match 46.62%

I have a brand new Latitude E7470 that I'm trying to connect to a 4k monitor thorough an E-port plus II docking station. Unfortunately the image keeps blanking out on the monitor, at a variable rate between once a second and once every few seconds. I've tried both a displayport cable and a DVI-to-HDMI cable for the connection, and the result was the same. Changing the resolution did not help either.
I am running the latest BIOS and latest Intel graphics driver from the dell support page (both about a week old). (By the way, the BIOS update messes up the OS installation - buyer beware.)
I've tried many other combinations to trouble-shoot the issue:
1. Different laptops (E64xx), same E-port, same monitor -> works fine
2. Same E7470, different E-port (old USB 2.0), same monitor -> monitor blinks
3. Same E7470, same E-port, different brand 4k monitor, different DP cable -> monitor blinks
4. Same E7470, same E-port, monitor switched to DP 1.1 -> monitor stays black
5. Direct connection between the E7470 and the monitor via HDMI -> works (but only at 30 Hz due to HDMI limitation)
So the conclusion is that the combination of E7470 + E-port + 4k monitor doesn't work, regardless of the exact monitor or exact E-port. That leaves the E7470 as the only logical culprit.
Is this problem a design limitation of the E7470, a known driver issue or a faulty notebook?
Thanks in advance!

A:Latitude E7470 produces flashing/blinking image on 4k monitor connected to docking station

I am also having a similar problem with my 7470. Newest bios and drivers are installed. Happens on both the laptop's screen and using an external monitor through a docking station.
Seems to start after the monitor has been turned off due to PC activity. Can fix it with a restart OR by changing the resolution and changing it back. Both highly annoying options. Switching from external to laptop screen does not fix it, it will continue.
my external screen is using a DVI connection from the dock to the monitor which is also DVI so I am not using some kind of adapter. Removing the connection from my KVM does not resolve the issue either.

1 more replies
Answer Match 45.78%

First time poster, long time lurker (even before my join date). Before posting, I would like to thank this forum for solving many of the problems I have had with my laptops and desktops over the past year. Usually, I search and find answers and trial and error till my issue is fixed.

So a very big thank you to all the members here who have unknowingly helped me in the past.

Now, onto my issue:

I have a Dell Vostro 1500 that is experiencing extremely slow boot times (3-5 minutes). When I press the power button, the laptop flashes the Dell logo, the loading bar fills (2-3 seconds) and then the screen goes blank and there is a blinking cursor at the top left of the screen. The laptop stays this way for about 3-5 minutes before loading my operating system.

I have ruled out the hard drive by pulling hard drives from my other laptops and booting to them. The issue persists no matter which drive I use. It will still boot to the operating system, it just takes 3-5 minutes.

Following that, I have taken the laptop apart, cleaned it using a can of compressed air, checked the heat sink for thermal compound wear, pulled and reseated the RAM from both locations, pulled and reseated other connectors such as keyboard, monitor etc.

So far, nothing has improved the boot times. I have run out of options and even after searching this forum I still haven't found this particular issue listed or solved. Most blinking cursor issues I came across were machines that refused to boot into th... Read more

A:Dell Vostro 1500 - Blinking Cursor Issue (Yes, I searched prior to posting)

6 more replies
Answer Match 44.94%

I have a dell laptop that has 1920x1080 resolution. However, i connect it to an external monitor that has 1920x1200 resolution. Basically almost everything i do is on my external monitor which acts as my main primary screen. Thus i do sometimes open some windows or drag a window or so to the other screen like youtube etc to the laptop screen which is the secondary monitor.


My issue at the moment is everything is way too big on the laptop screen. I want to have 1920x1080 resolution but its way too big. I googled what is my resolution on it and it shows 1536 x 864. Can someone tell me how to change this to 1920x1080? I googled what is my resolution on the external monitor and it does show 1920x1200 which is correct.


My external monitor which is my main monitor is fine at the moment with the 1920x1200. Its windows 10 but im assuming this should be very similar to windows 7 to fix this issue?

More replies
Answer Match 44.94%

I have a dell laptop that has 1920x1080 resolution. However, i connect it to an external monitor that has 1920x1200 resolution. Basically almost everything i do is on my external monitor which acts as my main primary screen. Thus i do sometimes open some windows or drag a window or so to the other screen like youtube etc to the laptop screen which is the secondary monitor.


My issue at the moment is everything is way too big on the laptop screen. I want to have 1920x1080 resolution but its way too big. I googled what is my resolution on it and it shows 1536 x 864. Can someone tell me how to change this to 1920x1080? I googled what is my resolution on the external monitor and it does show 1920x1200 which is correct.


My external monitor which is my main monitor is fine at the moment with the 1920x1200. Its windows 10 but im assuming this should be very similar to windows 7 to fix this issue?

More replies
Answer Match 44.94%

Hello Bleepers!

Wow! It's been a long time since i have needed your support. Firstly, Happy New Year to all! Secondly...Oh do I need your help.... desperately!

I was online earlier today, and all of sudden i noticed my computer started to run slower. Then i saw a yellow triangle with exclamation appear in the system tray (bottom right). Since i have seen malware and spyware before i was immediately alerted and had a bad feeling. I closed internet explorer and noticed two files on my desktop, one looked like a folder and the other a strange file. I never put them there (obv). Something malicious must have intruded my system while i was surfing. Malware Pop Ups began almost instantly . Since i was worried i didnt wait to see what they were pretending to offer, or be. It appeared similar to most scanner spyware. I shut down my pc right after malwarebytes would not load. It stated some sort of hard drive error, which i assumed was fake. Upon rebooting, I was unable to load windows. I had previously installed the recovery console which i was able to access. I did a little reading and loaded the recovery console. I read that running "chkdsk /r" might solve the problem. Well it found some errors after a lenghty check, and said it fixed them. I then rebooted. Now all i get is the blink cursor in the top left corner, immediately following the dell splash screen. I am only able to get F2, and F12 to work. The bios does recognize the hard drive. PLEASE HE... Read more

A:Blinking Cursor (top left) on Black Screen after I ran chkdsk /r on recovery console - Malware Issue Too

Malware topic here: http://www.bleepingcomputer.com/forums/topic374227.htmlNow that your topic is properly posted, you should NOT make further changes to your computer (install/uninstall programs, use special fix tools, delete files, edit the registry, etc) unless advised by a Malware Removal Team member, nor should you continue to ask for help elsewhere. Doing so can result in system changes which may not show it the log you already posted. Further, any modifications you make on your own may cause confusion for the helper assisting you and could complicate the malware removal process which would extend the time it takes to clean your computer.From this point on the Malware Removal Team should be the only members that you take advice from, until they have verified your log as clean.Please be patient. It may take a while to get a response because the Malware Removal Team members are very busy working logs posted before yours. They are volunteers who will help you out as soon as possible. Once you have made your post and are waiting, please DO NOT make another reply until it has been responded to by a member of the Malware Removal Team. Generally the staff checks the forum for postings that have 0 replies as this makes it easier for them to identify those who have not been helped. If you post another response there will be 1 reply. A team member, looking for a new log to work may assume another MR Team member is already assisting you and not open the thread to respond.To avoid ... Read more

1 more replies
Answer Match 44.94%

I have a dell laptop that has 1920x1080 resolution. However, i connect it to an external monitor that has 1920x1200 resolution. Basically almost everything i do is on my external monitor which acts as my main primary screen. Thus i do sometimes open some windows or drag a window or so to the other screen like youtube etc to the laptop screen.
My issue at the moment is everything is way too big on the laptop screen. I want to have 1920x1080 resolution but its way too big. I googled what is my resolution on it and it shows 1536 x 864. Can someone tell me how to change this to 1920x1080?
My external monitor which is my main monitor is fine at the moment with the 1920x1200.

More replies
Answer Match 44.52%

Here is my problem. I have a primary monitor and then I run S-Video out to the TV so I can watch video clips.

With Vista, I had no trouble starting a video clip in media player on the primary screen and then dragging it over to the second monitor (TV) for actual viewing.
However, I tried to do that with Windows 7-it won't let me drag Media Player over to the second monitor. I can drag other applications to the second Window (Word, Browsers), but not any media program. Even tried another media player application.

Not sure what to do-how can I get this to work? I want to be able to watch TV/Movies on my second monitor.

Jim

A:Dual Monitor Issue-Can't drag MedPlay to Second Monitor

Actually update. I have a hard time dragging anything to my second display. I never had trouble dragging things to my second monitor before. When I get to the right edge of my main display, the window dragging stops..I can't get it to the second monitor. What am I doing wrong?

2 more replies
Answer Match 44.52%

I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.

I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.

In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.

When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.

I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"

I have two monitors, both work fine as standalones but Windows will not detect either as a secondary.

Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.

A:Dual monitor issue, secondary monitor is undetectable

Welcome!

Try updating your card drivers. Go into Device Manager and right-click on your display adapter.

I suspect that the cards are too old, though. We will see.

~Jonathan

8 more replies
Answer Match 44.52%

I have an HP monitor HP w 2207 that comes with a VGA cord. It worked great with my windows 7 laptop but
now that I have a new windows 10 that does not come with only usb connections I bought an adapter VGA
to USB and connected the monitor to a USB 3 port.
 
The monitor comes on for a second and says Monitor Going to Sleep and then the screen turns black.
 
The VGA adapter said I didn't have to install any drivers so I don't know what to do now. Help!

More replies
Answer Match 44.52%

My sister has a Dell Dimension 5100 w/XP Prof., 1MB Ram, Pent 4 @ 3.2 ghz. All of a sudden it won't boot. When you plug in the power, the power switch led blinks orange in unison with the h/d green led.
This is what I have tried:
I pulled the power supply 24p connector and shorted the black wire to the green wire and the fan then came on..so I figure p/s is ok?????
I then removed the modem card and the video card as well as the memory and all drive connectors. Still same response. What do I need to check? Motherboard bad??Thanks
 

A:Desktop won't boot-Blinking orange led in unison w/ blinking green h/d led

8 more replies
Answer Match 43.68%

I have the dual monitor thing working and everything. I have my laptop and attached it using HDMI to a HDTV. The problem is that i cant get my desktop to my laptop. The HDMI cable, when plugged into my laptop makes the TV display the desktop automatically. Because of this, when i enable the dual screen, it extends my desktop to my laptop screen, and uses my tv for the main monitor. Does anyone know how to fix this?

A:Dual Monitor Main Monitor Issue

There's a nice guide here

1 more replies
Answer Match 42.84%

I just buy a new monitor LCD a brand of AOC it is blingking and turns into black screen and it said DSUB? please help me ... but sometimes it is in a good condition whenever i open archade games and it is running longer it will turn blinking...my only cure to this is to restart my computer to stop that DSUB?.........THANKS YOU PLEASE HELP ME TO RESOLVE IT....
 

A:My AOC LCD 716Sw monitor Blinking "it said DSUB"

DSUB is the connection type; 15-pin VGA D-connector, as opposed to a DVI connector.
Its obviously losing signal, so try checking cable connections, maybe change the cable. Are you using a DVI>DSUB convertor?
Also make sure you have the correct resolution for the games you are trying to play.
 

9 more replies
Answer Match 42%

Hi guys,

I have a very strange question that involves my video card doing something very strange that I have never seen before. Basically, right AFTER installing the video card driver (before installing the driver, the problem isn't there), while scrolling or typing in certain programs, the area where I scroll or type seems to blink a lot. One great example is the Nvidia Control Panel, in the Manage 3D Settings section. Whenever I scroll up or down, the area just with the specific options, like antialiasing and v-sync, (NOT the whole screen) seems to constantly blink.

Letters also blink every now and then while I am typing on the internet. Also, certain programs' tabs blink whenever I switch around between them.

Anyways, I have been trying to solve this problem for 2 weeks now and I have gotten nowhere. I have tried many different drivers and nothing. Do you think my video card is bad?

Here are the specs:

OS - Windows 7 x64
Motherboard - MSI P55 GD80
Video Card - MSI GTX 275 Twin Frozr OC 896MB
PSU - Corsair 750TX
CPU - Intel Core i5 750 2.66 Ghz
RAM - G.Skill DDR3 1600 Ripjaws Series 4GB (2x2)
Hard Drive - 2 x Samsung Spinpoint F3 in Raid 0
Case - Antec 900

Thanks
 

A:Strange "Blinking" Issue with MSI GTX 275 Twin Frozr OC

Anyone?
 

1 more replies
Answer Match 41.58%

Various error messages have appeared on my HP Deskjet All-in-One printer F4180 and now after installing a new black cartridge and clicking Align various lights are blinking i.e. paper type lights, print cartridge lights, power light and resume light. HP Support advice for blinking lights is that the cause is Fatal. As it's out of warranty I cannot phone, email or get a webchat with them so am a bit stuck. Is it likely or certain that the printer cannot be economically repaired as this message indicates?
Any suggestions or help would be much appreciated.

A:Blinking, Blinking lights on HP printer

PS HP have given me a telephone number to ring to get options and the number is (888) 747-7756 is this helpful or what? Where is this?

10 more replies
Answer Match 38.64%

i have this older packardbell monitor
and whenever the monitor is used for 5-10 minutes, it starts turing off and on? is this caused by lack of power, or.. ?
 

A:monitor issue

possible heat related and on the monitor - as it heats up with use a component goes faulty.

On some monitors the video card appears to turn the monitor on/off and you get a yellow/green led change - when it goes off does the led go off - you could try unplugging monitor from the video card and leave it on its own - if it goes wrong after 5-10mins then at least you know its not the PC video card causing the display to go on-off
 

2 more replies
Answer Match 38.64%

Greetings,

I'm having a problem and I think it's my monitor (details are in place).

From a cold boot, I turn on my monitor and the display goes black after 2-4sec. I know its not going into Sleep mode as the light behind my power button flashes in Sleep mode and it's not doing that here.

After turning my monitor off, it does the same thing again a few times before it stays on. After that its ok for however long I use it, even in games and whatnot.

My monitor is over 5yrs old so I'm guessing it's just that time, but wanted to ask here first.

Thanks in advance....
T

A:Monitor Issue

I agree, it might be failing, but you could try installing your driver for it, reboot with monitor on and see if Windows can grab a better driver.
Try the monitor on a different PC if possible. If you get the same issue I would say that would fault the monitor.

3 more replies
Answer Match 38.64%

Hi guys,

I just got a new monitor, it's a Samsung SyncMaster931B. I plug it in, and I just get a blank screen with a blue blinking light around the power button. No visuals on the screen at all, menu etc.

I then plugged it into my computer, booted it up and got the same thing. Just a blank screen with a blinking light around the power button.

I don't think it's my computer, other monitors work fine. I think the monitor is in standby mode, but after pushing random buttons, and moving mouse/keyboard nothing seems to wake it up.
 

A:Monitor Issue

Does it say anything about this in the manual? I would call customer support if you can't get it to do anything. Are you using VGA or DVI outputs on your video adapter? Make sure the monitor is plugged into the right port! Monitors are the one PC component that should just "work" when plugged into the video card so I'm stumped.
 

2 more replies
Answer Match 38.64%

Hello,

My computer monitor will sometimes take 15 minutes to turn on when starting up my computer. It will flash on for a split second, then go black for a couple seconds and then flash back on and continues like this for some time and then will finally turn on and work all day like nothings wrong.

I use bittorrent for music downloads and believe my computer is infected.

Any advice? Thanks!

Matt

A:Monitor issue

Hello Matt and welcome to the forum!

Are you sure that this isnt a monitor/connection issue?
Whats the make/model of the system?

If this is a tower (I assume it is) turn off both the monitor and computer then reseat the video cable on both ends.
Make sure that the connections are finger tight, just enough to hold them into place.
If the issue persists see if you can try another monitor on your system.

You may well be infected but to me this sounds like a monitor.

3 more replies
Answer Match 38.64%

Hey, so towards the beginning of this year I purchased a refurbished HP pavilion f1703 monitor from a local fix shop. One day while playing a game that ran somewhat slow due to my old computer it shut off and went black on me. Ever since I have tried to find a solution and have had no luck. The monitor will load the dell startup and show bloot into safe mode/startup repair (sometimes) but may randomly cut out. Also tried factory resetting the monitor for lower resolution and it might stay on abit longer before turning black again. The PC works on a TV, but the monitor shutting off after loading screens and even more delayed after lowering resolutions confuses me. Any ideas? Thanks.
 

More replies