Tech Problem Aggregator

New monitor Asus vs Viewsonic

Q: New monitor Asus vs Viewsonic

Asus VW266H ($375) vs Viewsonic VX2640W ($399)
Both 25.5 viewable

300 cd/m^2 vs 400 cd/m^2

Viewsonic does not have DVI
both have HDMI

Image Contrast Ratio
20000:1 (dynamic) vs 1000:1 / 4000:1 (dynamic)

Color Support
24-bit (16.7 million colors) vs Up to 16.2 million colors

Gray Response Time 2 ms vs 3 ms

Which one would you choose? Any other ideas?

A: New monitor Asus vs Viewsonic

Come on and give us a clue what you want to know.

9 more replies
Answer Match 63%

So, anybody used other one of these LCD displays? VIEWSONIC: http://www.viewsonic.com/products/lcddisplays/valueseries/VA926/ ASUS: http://www.asus.com/products.aspx?l1=10&l2=86&l3=548&l4=0&model=1697&modelmenu=1 If yes, please, do post anything you have to say about it! I'd be forever grateful for not having to make a leap into a void of ignorance if I chose to buy one of these. They seem to be decent low-price displays, but you never know. I'd prefer the ASUS one, just because the web store is a new one to me, and I'd like to experience it and it looks a bit cooler to me.
 

More replies
Answer Match 62.16%

Greetings all,

My ViewSonic VX2450wm-LED monitor is recognized as Generic Non-PnP Monitor. I even downloaded and attempted to install Viewsonic's "Standard_Monitor_Driver_Signed_Win7_x64". It times out at the end of installation and requests I download "Standard_Monitor_Driver_Signed" from Viewsonic website.

My display view is set at max res of 1600x1200. I am running Win7-Ultimate 64bit.

Is there any other way to get Win 7-Ultimate 64bit to recognize the monitor as VX? Any help would be greatly appreciated. I am using an NVIDIA GeForce 9300M GS 256MB card.

Thank you

A:ViewSonic VX2450wm-LED monitor is a Generic Non-PnP Monitor

If you need to know, here is how I fixed it.
First install ViewSonic's "Standard_Monitor_Driver_Signed_Win7_x64"
Go to Device Manager
Select Monitor drop down tab
Select Generic PnP Monitor
Right-Click on Generic PnP Monitor
Select option "Update Driver Software"
Select "Browse my computer for driver software"
Select "Let me pick from a list of device drivers on my computer"
Select from the models listed: Generic PnP Monitor
Select option "Have Disk..."
Select "Browse..."
Navigate to where the ViewSonic monitor drivers are stored
Example: C:\ViewSonic
Select monitor driver
Example: VX2450_SERIES
Click "Open"
Click "OK"
Select from the pop up window:
ViewSonic on the left and ViewSonic VX2450 Series on the right
Click "Finish"

Finally, you will receive the message: Windows has successfully updated your driver software.
Notice resolution is now 1680x1050

After successful install of Nvidia drivers for my laptop's "nvidia geforce 9300m gs" current version:

186.19 to new version: 260.99, the max res cannot be set to the following available resolutions:
1920x1200, 1920x1440 or 2048x1536

Enjoy!

1 more replies
Answer Match 60.9%

About four months ago I bought a supposedly rebuilt Viewsonic P815. About one month after I hooked it up it started to not degause. The screen is pink.

Every once in a while it will correct itself and be fine for a day or two, then it goes pink again. I've replaced cords and plugs.

Any ideas?

Thanks.
 

A:Viewsonic monitor

6 more replies
Answer Match 60.9%

I'm trying to decide between the G90FB 19" or the P95F+B...
Here are the links:
G90FB
http://www.newegg.com/app/ViewProductDesc.asp?description=24-116-282&depa=1
P95F+B
http://www.newegg.com/app/ViewProductDesc.asp?description=24-116-232&depa=1

The only real difference between the 2 is the fact the Professional one (P95F+B) has an aperture grille while the Gaming (G90FB) has a shadow mask

I know the shadow mask uses dots (dot pitch) while the aperture grille uses lines instead of dots...

Which monitor will give me the best picture for gaming and crisp clear text.
 

A:Which is the better Viewsonic monitor?

If you can afford it I'd get the Professional version. I had Philips 107P (Professional) monitor with a .25 Aperture grille and it was the best monitor as far as picture quality/clairity I've ever seen (I'm sure there are better, but not without paying major money).
 

2 more replies
Answer Match 60.9%

Hello,
I was just wondering if I'm pretty much out of luck with my monitor or is it fixxable?
Whenever there is any spot for black its pretty much like the picture on the right in this link
http://spectacle.berkeley.edu/~fior...rtist_varia_topics/[email protected]@@@@@itaki_fade5.html
It makes watching things or playing games horrible.
 

A:ViewSonic Monitor

Your link doesn't work.
 

11 more replies
Answer Match 60.9%

I run XP on a new box and a fairly new 19" (year old) View Sonic LCD monitor. The monitor worked as advertised on my old PC but when attached to my new one I frequently get a flashing green power indicator light and will get no picture.

This happens 100% of the time if I cold start the PC and I have to screw around with the restart button and on/off power button to get it to come back to life and in truth I do not know which combination of button pushing gets it to come back. I now use the power saver mode because that seems to be the most consistent way of bringing the monitor back to life but even that didn't work this am.

ViewSonic's web site wasn't much help.

Help here?
 

A:ViewSonic Monitor

9 more replies
Answer Match 60.06%

I have a four year old 19" viewsonic monitor-just recently its started shutting itself off for no apparent reason. If I press the power button it comes on again-for a while. Tried it on a different PC and same problem

Is this a known fault with monitors and is it likely to be worth repairing I wonder?
 

A:Viewsonic monitor turning itself off

10 more replies
Answer Match 60.06%

please help................my computer is quite old in computer years......about 6 or 7 years old.................i've never had any problems with it until now.....after recently moving and not having it set up for a few months i finally got it ready to use again......it was all running fine for about two days when i started having the monitor problem..........i have a viewsonic A90 screen..........the image on the screen will zoom towards the center and then the screen will turn black............if i turn it off and on it will just do the same thing and go black again......at one point it started working again for a few hours but that's it......i had the whole computer running off an high grade extention cord which i thought may have been the problem but i have moved it off the extention and i am still having the problem......i have fiddled with the cords etc and it didn't help..................please help me.....is the screen totally gonners????? this is very strange..........i've never seen a screen do this

greatful for any help........thanks
 

A:old viewsonic monitor problem

7 more replies
Answer Match 60.06%

Ok, no laughing when you read this.....I just bought a new Dell 660 computer that has Windows 7 on it. I can't get my monitor to work on it. Ok, so don't laugh, but it has been a good monitor that was manufactured in 1997......Viewsonic E771.....you know the old, bulky thing. I told myself that I would not buy a new one until this one died. I'm on my third computer with this monitor. Can I get this thing to work with my new Dell?
 

A:Windows 7 and old Viewsonic Monitor

Wow, does that bring back memories. I use to have one It's time for you to treat yourself to another Viewsonic monitor that will enhance your new computer

http://www.newegg.com/Product/Product.aspx?Item=N82E16824116580
 

3 more replies
Answer Match 60.06%

I have a ViewSonic 19" CRT monitor (bought new in '99) connected to a PC that runs Win XP SP2, 512 MB RAM, Matrox Millenium AGP card.

The system ran fine until I moved it (carefully) to another room. The CPU boots but the monitor does not give any video. I get a black screen with a repetetive blue area that indicates no signal. The specific line entry is "No Synch". I think I may have seen this in the past, when the monitor was powered on but the CPU was shut off. I can't be certain it's the exact same condition.

I switched cables and tried a different video card but no luck. I don't have another monitor other than my laptop. I think I can hook it up to act as a monitor but not certain. Can't afford to crash the laptop.

Any suggestions?
 

A:No Synch w/ ViewSonic Monitor

8 more replies
Answer Match 60.06%

I have a Viewsonic VA721 monitor that I was using up until earlier today when the monitor started acting like a scrambled cable tv channel when turned on.

I was wondering if anyone might happen to know as to what might cause that, what the technical term for it might be and as to whether or not it can be fixed.

Up until today I have never had any problems with the monitor. Every time I would walk away from the computer for a while I would shut the monitor off so that I could avoid any burn in problems with it thereby preserving the life of the monitor. Because of that I have never had any problems with it until today and at the moment I do not know what could be causing the problem.

I tried the monitor on two different computers with two different cables and got the same result. I bought the monitor in 2006 brand new and up until today it has served me faithfully without any problems.

I don't know if it can be fixed or even if it is worth it nor do I know if it is something that I can fix myself or if I would have to have someone else fix it.

What I do know is if there is anything that I can do to fix the problem myself and restore it to active service then I might choose to give it a try.

Until I have more answers though I cannot make an informed decision about any of it and that is why I am asking.

I am hoping that there will be someone here that will know about such things and can give me some straight advice and information about the monitor and the pro... Read more

A:Viewsonic VA721 Monitor

9 more replies
Answer Match 60.06%

My Viewsonic LCD monitor flashes on and off depending on what I am viewing. I can view pages in any program that has writing or a small number of small pictures without too much trouble. A web page with lots of pictures or the desktop and screen saver are the worst. The monitor flashes off so much on these last pages that I can barely see the page long enough to move the mouse and open a program or expand one from the start bar. I have checked cables, changed power cord, and checked video card drivers. Viewsonic website was no help. Anyone with any ideas?
 

A:Viewsonic LCD monitor trouble.........

Hi and welcome to TSG.

Do you happen to know if you are operating the monitor at or beyond its normal operating range for resolution and refresh rates?

Do you get a stable image if you start Windows with a lower resolution in Safe mode?

In the future, it would help us to help you if you give more details like the model number of the monitor and how it is connected to the computer. The TSG reporting utility program does not produce an exhaustive and detailed report about all of the hardware related to your computer.
 

1 more replies
Answer Match 60.06%

My 2nd attempt to get some help off the forums

A few days ago, I tried loading up Warcraft 3, a game, and the screen went black, with the light flashing on and off. If I alt tabbed out of WC3 the screen turned back on. The problem persisted after a restarted, so I left it for a while. A few hours later I tried and W3 worked fine, no problems.

However today I turn on my PC and after a few seconds during the boot up, the screen goes blank with the flashing on and off light again. I restart it and it goes blank even faster.
After a while on the forums (on my GFs laptop) I try pressing F8 before the screen goes blank, and then press ESC for the 'default' Boot option. It goes on to boot up normally, with screen errors. I test out warcraft 3, (since when I first saw this it was whilst starting up this program) and it works fine, and goes on to do so for a few hours, till I turn the screen off and on to see if the problem is permanently fixed. It hasn't, the screen goes black.
Upon restarting my PC I get the same error as before, Pressing F8 and Esc doesn't fix it anymore. However now after pressing Esc I get to the screen where they ask me if I would like to Boot up in Safe mode. I do so and it loads up in safe mode fine.
Later on I try again to get it to load in normal mode, it does first time. Then upon loading Warcraft 3 again, the screen goes black again, with the flashing light. Again rebooting results in the same black screen a few seconds into loading... Read more

More replies
Answer Match 60.06%

I am running Vista Home Prem.I use an 8800 GTS EVGA.I have the latest drivers for my 8800. I run 2 Viewsonic monitors. One is a VG900b and is fine. I also run a VX2235 digital monitor. Both monitors are listed in device manager by model. I manually installed drivers directly off of the discs.I have also downloaded Viewsonic's monitor drivers. I can't get my 22" to go to it's native resolution of 1680x1050.I have had these installed for a long time and working fine. When I ran a hard disc error check that is listed under tools under properties of my computer it erased my 22" and it's capabilities to operate @ native resolution. Another difference is that before I manually installed the VX2235, it was listed as a 'non plug and play monitor' under device manager. I have never seen that before. Does anyone know how to fix this? I am this close to going out and buying a new XP Pro disc.
 

A:Viewsonic monitor drivers?

Why not just uninstall the monitor drivers you installed and reboot and use the Vista drivers?

Start there.
 

2 more replies
Answer Match 60.06%

I just replaced a 1280x1024 Viewsonic monitor, that had gone bad, with another one (Viewsonic VA708).

Though I've never really been one to pay "hard hard" attention to how things look on a monitor - never felt a problem with anything - something just looks/feels "off" with this one.

This is most noticeable to me on the titles appearing on the browser tabs in Firefox. They just look "wrong" - watery maybe to my eye.

BUT... I have attached a screenshot comparing a blowup of a browser tab from my work computer Dell 1280x1024 monitor (top) and my new Viewsonic monitor (bottom), blown up to 1000 px wide (I cropped), and in the blowup, I can't tell the difference.

So why might I be perceiving things differently with this new monitor?

FWIW, I did update the driver from the Viewsonic site, and I also played with both the monitor's and the control panel's display adjustments.

More replies
Answer Match 60.06%

I recently downloaded the latest drivers from ViewSonic's page and isntalled them, and upon rebooting I had weird resolutions listed. Missing are 1024x768, 1280x1024, and 1600x1200. Instead I have ones like 1280x720, 1280x768, 1280x960, 1360x768, 1600x900, and 1600x1024. I Desperatly need my non-distorted resolutions back!! I have tried uninstalling the drivers and the device. I have also tried to just change to a Generic driver but the resolutions are the same. HELP!!!!
Monitor : ViewSonic A90f+ UltraBrite
 

A:ViewSonic Monitor Drivers

10 more replies
Answer Match 60.06%

I just bought 22" viewsonic vx2235 , but having problem in installing it,The maximum vmixel size is 1680x1050(wide view) but my properties doesnt show this pixel size.rather my pc pc shows only non wide view pixel .

I have installed the dirver as shown in user guide but still doest work.I have 2.8Ht and MSI chipset board, please tell me what may be the problem that i done have wide view pixels

Please Help!!
 

A:ViewSonic vx2235wm LCD monitor

What video card to you have? BTW I have the same monitor.
 

4 more replies
Answer Match 60.06%

hello i am new here. my viewsonic VE710b lcd monitor is acting up. when i boot into ubuntu 7.10 the monitor blinks on and off for a minute before it stabilizes. this happens even during the loading of grub which only means that it has nothing to do with the OS. i tried with my other linux OS on another partition and the same thing happens. does this mean that its the end of the road for my trusty friend?!

 

A:viewsonic monitor on the fritz?

6 more replies
Answer Match 60.06%

hello everyone.

I have a monitor viewsonic p220f that when I turn on, a thin blue horizontal line appears in the middle of the screen. Dont know if its broken or could be fixed or maybe video cable is broken.
Please advise
Thanks ahead of time for any help.
 

A:Viewsonic Monitor Problem

It sounds like the vertical deflection is gone. Try the monitor on a different computer or a different monitor on yours to see where the problem is. If the monitor is bad its better to bury a new one than to pay to have it repaired. New monitors are pretty cheap now.
 

1 more replies
Answer Match 59.64%

I have a viewsonic UltraBright A90f+ monitor and an ATI radeon 9600XT bravo video card. While playing some games my computer will hang and I believe use VPU recovery program supplied with the VC and then return to the game. After about 3 times the monitor goes black and "Viewmonitor" pops on the screen with 2 values 18.9 & 23.6 (normal values a lot higher)and the status is OVER at the bottom.It also says User Mode 14? I then have to restart the machine. Also I have noticed that sometimes when I exit a game my screen resolution has changed to that of the game I was playing. I have all the latest driver for Monitor and Video card. I have and ABIT MB using RAID set up and it also has its BIO's and drivers updated. I run windows XP also with 512M corsair ram.

Any help is appreciated

Thx E West
 

A:Viewsonic monitor locks up computer

Doesn't sound like the monitor is involved in the problem. A quick swap to another monitor to just be sure.

Does it only occur on one particular game? Anything running hot? How tight is the power supply sized?
 

3 more replies
Answer Match 59.64%

Hello guys,

So one night when I left my computer on, i wake up at 3AM on a rainy night and i notice my entire room flashing (like from a tv in dark room). I thought I was having a rolling blackout, but as I got to my senses I noticed that my monitor was the only thing turning off and on. I turned it off, and went to sleep. The next morning I went to go turn on my computer and the monitor does the same thing. It turns off...on...off...on...off...CONSTANTLY (about a one to two second delay between each) until I turn the monitor off. The LED light is green. It goes from green, to off, to green, etc. I've had no prior problems with this monitor.

I tried switching out the power cord and plugging it into my wall (not connected to my video card, or anything)...no luck. It's definately the monitor. I don't know if it's dead or repairable or what. I often leave the computer on over night but i have a 10 minute screensaver and my monitor goes on standby after 20 minutes. When i fell asleep, my monitor was on standby (yellow LED). When I woke up it was the green turning on and off. Doesn't make much sense.

I don't have a replacement...so my situation is pretty bleek atm.

I have a Viewsonic LCD VX924 3ms that i bought around the holidays of 2005. Any help would be greatly appreciated.
 

A:Viewsonic LCD Monitor turns off and on constantly

6 more replies
Answer Match 59.64%

Hi Guys, I have no idea whats going on over at Viewsonic, however their support service is lacking some serious SUPPORT!!! Just the other day, I re-installed Vista 64 and had been happily using a x64 monitor driver for my VX2025WM, just before the re-install I decided to trall the net for latest drivers and deleted any old ones I had (stupid I know). Anyway on re-install with the latest unsigned driver - Standard_Monitor_Driver_Unsigned_Windows_x64 - Dated 04/10/2007, it is now telling me it cannot find my monitor. I've also tried the latest signed driver and this is not working either. I have tried a manual install from C:\Viewsonic and funny enough the monitor isn't even listed. I've asked Viewsonic for help with them replying asking me to download the latest unsigned driver (what the???) All I need is a copy of the previous unsigned driver to this one listed and I know 101% it will find my monitor and work, does anyone have it or know where I can find archived drivers, as Viewsonic have not responded to this request. Please help! Cheers in advance.

A:Viewsonic VX2025WM Monitor Driver

Ahh it's always the way... Just found the old (November x64) driver on DriverGuide.com and guess what, it WORKS!!! Tried updating manually to the new driver after I installed the old one and it's displaying a could not install new driver message. Bloody viewsonic, I HATE SUPPORT!!! Why do they treat us like monkeys???

6 more replies
Answer Match 59.64%

Just upgraded to Win7 64bit. My trusty old monitor has no sound (the picture is fine) I found a driver for a generic Viewsonic x64 driver, http://www.viewsonic.com/support/dow...d_Win7_x64.zip but that didn't solve the problem. I read a suggestion somewhere to uninstall the driver and let Windows find it. That didn't solve the problem either. I tested the monitor with my old (XP) system, in case the monitor developed a sudden fault, but there is still sound when I plug it back in there.
Any suggestions would be appreciated. I really don't fancy having to buy a new monitor too, after having had to replace my printer and scanner

A:Viewsonic vx2235wm-1 Monitor has no sound.

What does the monitor require? Older monitors, that use VGA or DVI usually have a Jack to connect from the PC's Speaker out (GREEN) to the monitor for sound. No driver is required for that. There is no audio in a VGA or DVI connection, just video.

8 more replies
Answer Match 59.64%

Can any one out there tell me how to find out the best monitor settings, i am not sure they are correct, expecially the horizontal and vertical settings.
 

A:viewsonic a72f monitor settings

specs

1280x1024 maximum resolution
Displays a maximum resolution of 1280x1024; 1024x768 optimal resolution at 87Hz flicker-free refresh rate for easy-on-the-eyes viewing.
1280x1024 @ 66Hz
1024x768 @ 87Hz
800x600 @ 110Hz
640x480 @ 135Hz

http://www.viewsonic.com/products/crt_a72f.htm

drivers
http://www.viewsonic.com/support/drivers.htm
 

1 more replies
Answer Match 59.64%

My monitor seems to be experiencing some kind of problem.

The best way I can describe it is as a 'widescreen' mode. There is a black bar on the top and bottom of the desktop about 1 inch wide and extending across the entire length of the screen. I cannot move the mouse into this portion of the screen.

When adjusting the horizontal and vertical settings, 100% stops with the 1 inch black bars still in place. I cannot seem to make the desktop fit the screen. It seems to have shifted into some other mode of viewing.

I called Viewsonic tech support, but they didn't really know much else to do besides checking my settings. I am at 1024 x 768 resoloution, Radeon 8500 64MB graphics card, Windows XP and have installed the most recent drivers. Even when booting - the black bars are present, as if the monitor has somehow decided that is the mode it wants to be in.

If anyone has come across something like this before or knows how I might be able to fix it, I'd be MUCH obliged!

Regards,

Jeff.
 

A:Viewsonic Monitor E771 Problem.

Might be starting to fail, 3 year warranty on those generally check the date on the back. Absolute easiest think to do would be to try it on another computer. On the other computer see if you square up the image with the screen if you can't then its the monitor, if you can it could be the video card.
 

2 more replies
Answer Match 59.64%

I'm stuck between these 3 monitors. The HP 27xi AOC i2757fh or the Viewsonic VX2770SMH-LED 27

They all look similar, but I'm just not sure which one to get. I'm leaning toward the HP 27xi though, but this site rated the AOC i2757fh a little higher over the HP 27xi. I'd like to hear some feedback from you guys.

My main usage is playing games like BF3/BF4, SWTOR and Titanfall when it comes out. I also do a lot of web surfing and occasional movie watcher on this monitor. My current monitor is a 24 inch Asus VW246H and I like it, but I don't love it. So my main concern is how well it displays games. I don't want any ghosting and the least amount of input lag I can find. Now, I know the AOC boasts a slightly quicker response time of 5ms vs the HP's 7 seconds, but the reviews I've read thus far state there is no visual lag from the HP. What do you guys suggest? Thanks in advance!
 

A:HP 27xi, AOC i2757fh, or ViewSonic Monitor

Really? No one has an opinion on this?
 

3 more replies
Answer Match 59.64%

I have a ViewSonic 2235 22" LCD. I need to find a driver to allow 1600x1050 resolution. I've been to ViewSonic's site and downloaded their signed and unsigned Vista drivers with no improvement - the closes resolution I have the option of is 1600x1024 or 1600x1200.

I had this monitor working fine with a 1600x1050 resolution. I changed out my motherboard (from an Asus p5w to p5e) and reinstalled Vista - and now I'm unable to get the monitor to the right resolution.
 

A:Solved: ViewSonic Monitor driver

Never mind, problem solved. I needed one additional Nvidia windows update, but was confused because windows said it was current on updates.
 

1 more replies
Answer Match 59.64%

What is the best way to clean a flat screen monitor? It's not a flat panel monitor, just a view sonic trinitron style....I got finger smudges and want to know the best cloth/fabic to wipe it with.
 

A:Wiping off a ViewSonic FlatScreen Monitor

Hi ChunkyTeXas,
I use a clean soft towel and water. It works fine> Turn the monitor off too before you clean it
 

2 more replies
Answer Match 59.64%

I have recently changed my hard drive and had to reinstall all the programs on my computer. Since doing so, the Viewsonic monitor has been stuck in troubleshooting mode. All the fonts and windows are very large, and the only resolution available is 680 x 460, with the only colour option at 16 colours.

What do I do to get a better resolution with this monitor. It worked fine until the hard drive was changed.

I have downloaded the driver for the monitor from the net which was unsuccessful.

I tried changing the adapter from standard to SVGA as recommended by windows, which was rejected by the computer and I had to change it back.

Windows is not accepting the driver that I downloaded.
 

A:[SOLVED] Viewsonic Monitor problem

13 more replies
Answer Match 59.64%

I just bought a new 19" A90F+ ViewSonic Monitor (not flat panel LCD) and everything went great for my 1st week. After this when I would move my mouse to take it off standby my perportions were off and the I could only see half the taskbar...I guess it change the display areas automatically. Also I have noticed some of the edges kinda slant in or curve at the edges some. It's so frustration because the bottom seems to be fine and the top corners can be half there. What's a joe to do?

PS: I Havne't even touched the OSD settings on the monitor itself...

Mike
 

A:ViewSonic Monitor Won't Square Up In Corners

6 more replies
Answer Match 58.8%

Dear,
I have Viewsonic P225f CRT monitor. My desktop computer has Microsoft Windows Vista Ultimate 64-Bit operating system. I want driver suitable for 64-bit. I had tried to install unsigned/signed driver from Viewsonic web site but installation encountered problems. I have a gaming system see specifications below, so I want to install Viewsonic monitor driver instead generic driver. I can send you error details as attachment if you mail me link. Kindly solve this driver problem.

Thanks


Processor: Intel Quad Core Extreme Processor QX6700
Motherboard: MSI P6N Diamond Nforce 680i SLI
RAM: Corsair Dominator Quad Kit 4GB DDR 2 1100MHz
Graphic Card: NIVIDIA Geforce 8800 Ultra OC SLI (768MBx2)
Hard Disk: Dual 1000 Giga Seagate 7.11, SATA, 32MB Cache for RAID
Sound Card: Creative X-Fi Fatal1ty
Optical Drive: LG 18X DVD-RW, SATA
Speakers: Creative Gigaworks S750
Power Supply: Enermax Galaxy 1000 Watts SLI
Casing: A-Open QF60
 

More replies
Answer Match 58.8%

I need help in making my mind up between the gorgeous Lg 1981Q and the attractive Viewsonic Vx924.

I have recently upgraded my desktop and am thinking about shifting to dual screen, mainly for video and web editing (with a little bit of gaming on the side) and need help in picking out new monitor.

one of my problems is that the looks of the tft is very important to me, cos i cant look at something ugly all the time, i would like a tft which is slim and very sexy (just how i like my women )

If anybody owns either of these screens i would really appreciate their feedback, on how good the monitor is and if they would recommend it.

Thanks

Chewbacca.

P.s is there really that much noticable difference between 4 and 8 ms, and if so is it going to be noticable when video editing and gaming.
 

More replies
Answer Match 58.8%

Never mind, as quick as the problem began, it's resolved itself for some reason. Post can be deleted.






I'm having a bit of a strange issue with my ViewSonic VX2258 monitor.
Out of nowhere, the screen started to flicker (not the sort of flickering you might expect from a loose cable, but literally going completely off and back on) every few seconds. Eventually the screen did not come back on at all.
Thinking there was a loose cable, I tried tightening them but to no avail. The light on the monitor is still blue showing that it is detecting an input and Windows still detects that the monitor is plugged in.
When I turn the monitor off and on, I can see the ViewSonic logo, but oddly enough after that it is a black screen and I am unable to get any system menus to appear (the ones that are generated by the monitor itself, not the PC) or change the source. I would have thought that because of this, there is something wrong with the display but that doesn't seem to be the case considering I can see the logo upon starting the monitor. (Perhaps something to do with firmware?)
I don't think that it is a problem with my GPU as my secondary monitor (a Samsung SyncMaster) still seems to be functioning perfectly but just in case, it is a Powercolor Radeon R9 290X and my drivers are all up to date.
Thanks for the help!

More replies
Answer Match 58.38%

Title says it all really, just put a scratch in my 3 week old monitor , mildly annoyed about it and wondering whether theres any way to make it go away. When I run my finger over it it dusn't feel like a scratch, but with the monitor off, or showing a bright white screen its quite evident, and running fingernail over it i can tell its an indentation. Against bright white it looks almost like the effect seen if theres water on your monitor (rainbowy), if that helps at all. Basically i'd just like to be not able to see it, and was wondering if you had any suggestions?
 

More replies
Answer Match 58.38%

hi all - ive got a problem with my new viewsonic vx2753mh-led monitor. its got 2x hdmi inputs and one vga.

the vga works straight off the bat, but whenever I try and plug the hdmi in it just says no input signal detected and goes black

I noticed in device manager that this was installed as 'generic non-pnp monitor' so after jumping through some hoops i managed to install the driver as 'viewsonic vx2753 SERIES'
Anyway this doesnt seem to have made a difference. still no input through the hdmi.

I have tested to cord on my samsung tv and it worked fine so it can't be a problem with the cord or the graphics card....

just some general info that might be of use:
windows 7 x64
dual monitor setup

the graphics is integrated on the intel i5 chip
my display adapters in device manager says Intel(R) HD Graphics Family.
it has a dvi out, hdmi out, and vga out.

thanks for any help you can give!

A:Viewsonic LCD monitor not recognizing HDMI input signal.

I have a Viewsonic which I'm also trying to run a media PC to connected via an HDMI cable, and I have noticed the exact same thing.

It was working fine for awhile, but recently I have been receiving an error on screen saying the "HDMI to DVI cable as experienced an error" or something to that effect. Note: I am using strictly an HDMI cable, not an HDMI to DVI as the message states (can't explain why I'm getting that message). I did the same thing you did, tested the machine using the same cable on another tv, and it worked fine on the other tv. What's strange is I can connect the cable box to the tv using the identical HDMI cable and it worked fine. Tried again using the same cable from the PC to the tv, and either 1) blank screen, or 2) shrunken screen with the aforementioned error which will go blank once I open Media Center.

Sorry, I don't have an answer, but it seems to me Viewsonic hasn't made a good product in terms of connecting media PC's, for some reason. Of course, my tv is out of warranty at this point. If you find an answer, keep me posted, I'll do the same.

I have a Viewsonic VT2430 monitor/tv, and a Windows Vista 64, with ATI 4200 graphics chip PC.

2 more replies
Answer Match 58.38%

Just performed windows update on my Dell Inspiron Desktop 560MT - Intel(R) G45/G43 Express Chipset. I am running Windows 7 Home Premium - 64 bit. I have been using dual monitors on the system since purchase. After performing windows update today my second monitor (connected by HDMI) will no longer display. The other monitor (the working one) is connected via VGA. The system does not recognize it is even connected. At start up however it will display up until login window. I am using two ViewSonic VX2453 Series monitors. I am desperate as I have to have both monitors for work. I have tried unplugging and replugging, restarting it with it unplugged and plugged. I uninstalled the update and have tried autodetect on the system all to no avail. Help!!

A:After Windows update 2nd Viewsonic monitor will no longer display

KChristians, welcome to the Seven Forums.

Sounds like you have WU set to automatically download and install updates, and it updated either the video or monitor driver. If that is what happened check your update history and you can uninstall it from there and should get you back to the previous drive.

Also if that s what it was you might want to set WU to not download and install drivers automatically, step #4 here,

Device Installation Settings

7 more replies
Answer Match 57.54%

Me and my friend just finished our computer, we had a few issues with the NZXT Phantom case at first: they didn't send us a few screws so we had to go to the local tech store and buy a few, but everything worked out.

Anyway

Our screen seems to be having a slight problem: the image of the screen is not taking up the entire space provided by the screen.
There is an option that we found: Auto Image Adjust, and I am sure this is the right one, except: it's disabled!

It's a ViewSonic VX2450wm-LED Full HD 1080p
We have Windows 7 installed on it, and everything is working fine.
The Screen Resolution is set to 1920 x 1080.
DPI Setting is at 150%


Thank's for the help!

A:[SOLVED] ViewSonic Monitor Auto Image Adjust Disabled

How much of the screen is being used?'

What is your GPU?

How is it connected?

Did you install the drivers for the monitor and GPU?

5 more replies
Answer Match 57.54%

 I have it hooked up with HDMI (brand new gold plated cable). The text especially is blurry/fuzzy and the screen doesn't take up all the space it should - about 1/2" at the top and sides, bottom is ok. The guy at View Sonic support said it was a video card issue and I would have to figure it out with HP or Intel. Can anyone help me? I have Intel HD graphics. The monitor is Viewsonic VX2270-Smh-LED. It's 21.5" 1080p frameless IPS display.

A:Trouble with Spectre x360 and Viewsonic Monitor, blurry text...

 Hi @butlerll, Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Spectre Notebook and the HDMI port not working correctly. Try running the Windows updater Tool. Here is a link to help troubleshoot the HDMI Display. If the Notebook is not having an issue displaying anything on the Notebook screen, it is not a graphics card. Please get back to me how this goes. Thanks for being a part of the HP community. Please let me know if this help resolves the issue by marking this post as Accept as Solution.  Thanks. 

8 more replies
Answer Match 57.12%

Dear All Experts,

Hello! How are you all doing? Well today, I came across this Viewsonic LCD Monitor which looks quiet appealing and of course, being manufactured by the leading display technology company of the world  Viewsonic! Heres the link to the product:

Viewsonic VX2433wm (24inch HD LCD Monitor)
http://www.viewsonic.com/products/de...s/vx2433wm.htm

Now here's what I need to know:

My main use of an LCD Monitor will be to:

* Watch Movies (Which should include a DVD & High Definition (HD) Quality Videos).
* Play 3D and Normal Games.
* Movies like Jurassic Park, Speed, Titanic, Action Movies, etc...
* Web browsing, doing back work on PC, Listening to music.

So, this in short will be the purpose of using a new LCD Monitor. So far, I am using CRT Monitor.

Once you have gone through the above link, could you kindly let me know how well would this Viewsonic LCD Monitor fair in terms of my above mentioned usage.

BUT NOW HERE's A TwIsT >>> While looking forward to buy an LCD Monitor, one question that kills my decision of buying it is that What if a Touch Screen LCD Monitor will be made available once Windows 7 releases to users. Then would all these LCD Monitors sold out today will be consider completely outdated not only in terms of technology but features as well. However, there are few things that comes to my notice for going with an LCD Monitor and not a Touchscreen one...

a) Touch Screen LCD Monitor is for sure goi... Read more

A:Viewsonic VX2433Wm's - Is it a good LCD Monitor? Should wait for Windows 7 Touch Scre

Hi, Viewsonic is a well known and trusted brand (in my experience) you will find that most modern monitors are well made certainly need to be FCC certified for US sale . Now there is one major element missing from your post. What computer specs have you and most important Memory, Video card and Power supply unit (PSU).

2 more replies
Answer Match 51.66%

I have a Viewsonic E-655 and when I put it on my computer nothing happens... if I pull out the power and then replaace it there is just five shimmering balck belts accross thre screen. I tried it on my Mum's computer, and it came up with the message Frequency Over range. What is this.
I had it out last night and had it plugged through a Sanyo projector - ie. the computer plugged into the projector and so did the monitor. Would this have done it? Also, carrying it back out to the car when it was raning might have gotten it wet?

Thanks in advance for any help!
Tony
 

A:Viewsonic Monitor "Frequency Over Range"

Only thing I can think of is that your video settings got changed somehow. Can you put another monitor on your machine, boot up into windows. go to start/settings/control panel/display/settings tab/advanced button/adapter tab/ in the drop down box if refresh rate is set to optimal change it to adapter default, save , shutdown and hook up the other monitor. Long shot, probably won't work
 

1 more replies
Answer Match 49.56%

Hi,

i have a notebook lenovo y570 that has a intel 3000 and a nvidia gt 555m card. My external asus vg248 monitor used to work through hdmi, but now it doesnt. I test with another laptop and the monitor works through hdmi... i must have changed some setting in my lenovo. The monitor says no hdmi signal.

I think something is wrong here:

help please!!

A:Asus monitor not working as external monitor for notebook

See if this helps:

Extending the desktop to the attached monitor with Microsoft Windows Right-click the desktop, and then click Properties.
In the Display Properties dialog box, select the Settings tab.
Click the Display list and select your external monitor.
Note: For help identifying the monitors, click Identify.
Select Extend my Windows desktop onto this monitor, then click Apply or OK.

1 more replies
Answer Match 44.52%

I have a WIN XP XP and new ASUS VH226H 22 inch wide screen monitor. I cannot figure out how to get my PC to recognize it. It still says plug and play monitor in the advanced settings.

Thanks
 

A:ASUS Monitor

7 more replies
Answer Match 44.52%

I have been having trouble with my ASUS monitor, the problem is that whenever the screen gets dark (For example say im watching a movie and they go into a cave or somewhere with a low light level) my monitor goes completely black i think the back lighting is turning off. If anyone can help it is greatly appreciated it has been an annoyance since the day i got it. Here is some other information about my computer:

Monitor - ASUS VE247H
OS - Windows 7 Home Premium 64bit
GPU - EVGA Nvidia GTX 460 SE
RAM - 6GB DDR3 Triple channel
CPU - Intel Core i7 950
 

A:Help with ASUS monitor

No one?
 

2 more replies
Answer Match 44.1%

Hi.

Recently bought this monitor
ASUS - Display- VK278Q
Connected it with the HDMI from my ATI Radeon HD 5770
Im using Windows 8 Pro 64 Bit

I assumed windows would adjust or install whatever drivers needed to get full output from the monitor.

Nope.

Resolution is allegedly at full but the whole screen does not fill up and the quality looks crappy.

Cant find any drivers or cant seem to know what to do.

Do I need drivers for the monitor?
New drivers for my HD Card?
New drivers for windows?

Please Help!

Thanks

A:Asus Monitor VK278

Hello Hostelo,

You practically have the same monitor as I do. I have the Asus VE278Q, which is the same but without the built-in camera. I also have similar graphics with a Sapphire HD5870.

I found that using a DisplayPort or DVI connection at both ends worked best for me. I had the same issue of the black border when using HDMI on these monitors sometimes.
You might see if installing the Microsoft certification for the monitor from ASUS below may help.

ASUS - Display- VK278Q

I'm also using the latest 13.6 Beta 2 AMD video driver.
AMD Catalyst
...or you could try the latest 13.4 WHQL video driver.
AMD Catalyst

1 more replies
Answer Match 44.1%

Hey Everyone.

I recently bought a new LCD HD monitor, because my old monitor stopped working.

I got the Asus LCD HD VW246H and conected my computer (HP Pavillion) through DVI and my PS3 through HDMI.

It worked fine until yesterday when my monitor blacked out...the screen was completely black ( It looked like it was turned off) but the blue light on the power button was still on and no matter how many times I pressed it, the monitor wouldn't turn off and I had to unplug the power cable and plug it back on ( The monitor turned on )

Ever since that happen the monitor blacks out randomly and I have no idea what might be the problem.

It blacks out while I'm using my PS3 and the PC and I checked the power options so thats not causing the problem

My Graphics Card is an ATI Radeon X300 series.

Hope you can help because this was a huge investiment and it's only two weeks old

I'm Portuguese by the ways so sorry for any spelling mistakes
 

A:Asus HD LCD Monitor Problem

If the monitor has failed, which it sounds like it is, then you need to take it back to the place of purchase for exchange or contact Asus for warranty service.
 

1 more replies
Answer Match 44.1%

Could use some help.

I have spent hours looking for drivers for this monitor on the Asus site with absolutely no luck.
I have check many other sites with no luck also.
All the Asus site shows are drivers for Windows 8 but not Windows 7.

Malwarebytes blocks many of the non Asus sites.
If I can I would like to have drivers with out installing Java first.

Asus VE278Q

A:Asus VE278Q monitor

hi only thing i find is the utilities https://www.asus.com/us/Monitors/VE2...Desk_Download/

4 more replies
Answer Match 44.1%

I currently am using a monitor that's been messing up lately. I don't have another monitor to use except an All-In-One with a messed up hard drive. Does my All-In-One have a HDMI input to use or do I have to change out the hard drive into it? Any and all help is great, I need my computer ASAP!

More replies
Answer Match 44.1%

Hi,

I put on my A6G laptop today, and the first thing I noticed was that the startup screen -- rather than its normal black -- was red. The Windows logo popped up, but the colors were weird. Then it went to the point where it's supposed to go black for a few seconds before the welcome screen, and again that was a red color. Logging in, everything looked off and weird -- sort of pinkish/reddish. I could see greens, blues, browns, yellows, and reds displaying (but again, off and strangely saturated).

Now, I did some searching and LCD monitors that get a "red tint" tend to indicate a dying CCFL backlight. Could this be the case here?

I don't have a picture ATM (I can post one), but the color is _extremely_ uniform -- it's just a solid red when it should be black, no apparent variation. Possibly this can happen with a dying backlight, I'm not sure, but is it possible that it could be an issue with the seating of the video cable or a crimped wire?

I've got some pictures here now:

http://img79.imageshack.us/img79/6703/screen1db8.jpg
http://img518.imageshack.us/img518/6162/screen1asm4.jpg
http://img110.imageshack.us/img110/9985/screen2pu2.jpg
http://img160.imageshack.us/img160/3299/screen3wd7.jpg

Note any blurriness is just because of the photos being taken in low light (couldn't get the room any brighter, and flash would wash all the detail out).

The worst thing is that I'm due to take a working vacation at the end of the week, a... Read more

A:ASUS A6G Monitor Problem

If its only 2 weeks out, then maybe they'll still fix it under warranty - some companies will fix things if they are just out of warranty, it'd be worth calling to find out for sure.
 

3 more replies
Answer Match 44.1%

Hey guys,

I'm thinking of upgrading my AOC 17" Monitor to this Asus VK222H 22" Monitor and I was hoping you guys could help me with a couple of things:

1 - On the information page for the Asus VK222H Monitor (http://www.ascent.co.nz/productspecification.aspx?ItemID=369487) it states under 'Faulty pixel tolerance' that the monitor "may have some pixel defects". What does that actually mean, is there something wrong with the monitor?

2 - Will I be able to run games at the same specs with this monitor as I was able to with my current one? My specs are: XP, Athlon 7750, 4GB Ram, Radeon HD 4830.

3 - I use the computer for watching movies, playing games, and work. Do you think this is a good choice?

Thanks in advance for any help,
Chris
 

A:Asus VK222H Monitor

Any help?
 

1 more replies
Answer Match 44.1%

Hi there
Don't get jealous - but I'm thinking of taking delivery of one of these. I always buy MYSELF an XMAS present too !!! - yes that time of year coming up.

Just wondering if any decent Video cards can support video at this resolution (4K - 3840 X 2160 ).

While it's "only" a 32 inch screen this beats ANYTHING I've seen so far by a universe.

Any extreme gamers out there -- I'm not a gamer but I know some of you guys play around with all sorts of Video cards so you might have some info.

Cheers
jimbo

More replies
Answer Match 44.1%

i just got this one like 2 days ago, and i find all the colors settings dont look right, and no matter what i do it dont seem to be right, im using a 9800GTX + DVI with it, anyone got this and could post there color settings for me? thanks
 

More replies
Answer Match 44.1%

My monitor, ASUS VE205, has a signal for 1/10th of a second. Then it goes off/hibernates. I bought the monitor and ASUS Essentio Desktop CM5671 at the same time, in 8/2010. This problem just started. I switched monitors. Everything works fine with the Acer monitor. I viewed old posts. Someone suggested unplugging power cord and holding power button down. I tried that. The monitor still won't stay on. Any suggestions?. Obviously, I am out of warranty.
 

More replies
Answer Match 44.1%

Three years ago I bought the Asus VW224 Monitor. It's worked wonderfully every day until this past week. Three days ago, the screen began flickering occasionally - the picture would not go away completely, just dim and then return to full brightness. Last night, the monitor finally dimmed and then went black, although it was still on. If I turn it off and then on again, it will briefly show my dimmed desktop, then go to black again.

I don't mind the excuse to get a new HD monitor, but I'd like to salvage the current one as well if I can. Does anyone know what might be wrong? I'm hesitating to open up the thing and look at the board until someone with experience advises me to do so.

Thanks!
 

A:Asus VW224 Monitor

6 more replies
Answer Match 44.1%

Hi,

I have 3 monitors, BenQ RL2450, two of them via DVI and one via HDMI.

Issue, HDMI connected monitor goes black every now and then. Not really a pattern in it. Sometimes it can flicker black once every 5 min, sometimes once every 30 minutes. Monitors are ok, checked with other computers, cables are OK, tested on different monitors and HDMI on TV.

I am suspecting drivers, so did a complete uninstall with graphic removal tool, then installed latest WHQL and beta drivers, still the same. Seen several users with the same issue, but no solution.

Graphic card keeps 40-50 Celsius while gaming, so that's not the issue.

Just can't remember back when I did not have this issue, hasn't been there forever.

All monitors on 60Hz, and with the same resolution.

Tips/tricks whatever really, is greatly appreciated.

Thanks!

A:Asus GTX 670 DC - monitor goes black sometimes

I just did a test, reverted back to March 2013 drivers - 314.22 - and it's been stable and no black screens since the downgrade.
Found this post at Geforce.com if someone has the same issue.

Quote from the user:

I work for a game developer, so our company uses a lot of GPUs.
I encountered this issue yesterday when I installed my old BFG GeForce 275 GTX OC card in my new GigaByte GA-Z87N-WIFI motherboard, connected to a new Asus VS248H-P monitor, all on Windows 8.1 Pro, and updated the nVidia drivers.
Thankfully our IT guy has seen this issue on -multiple- nVidia cards in our studio, and so when I asked him about it, he immediately said to use the 314.22-desktop-win8-win7-winvista-64bit-english-whql.exe driver. He even had a copy ready to give me. He said that in his experience this has been the last good revision of the drivers since they made a change that has caused problems ever since.
For your convenience I have found a copy of the driver on nVidia's site you can download:
NVIDIA DRIVERS 314.22WHQL
Note that, per the driver name, you will need to be installing on a 64-bit copy of either Windows 7 or Windows 8 or 8.1. I'm sure with more hunting you can find a copy of the driver at the same revision for a different operating system.
Full steps I took:
Started Windows, used F8 and rolled back to previous System Restore point to remove current drivers.
Went to About - Display Driver Uninstaller and downloaded DDU
Ran DDU. It asked me to reboot in safe mode bef... Read more

3 more replies
Answer Match 43.68%

Just bought the asus vg248 144hz monitor. I was really happy about it for 2-3 days, until my monitor got a bit wierd. Its hard to explain, but my monitor make this black shadow looking "line" behind letters, tabs and pretty much everything i move on my monitor. So if i was to move this tab across my monitor, all the edges would get this black "blur" behind everything i was moving. This was not a problem in the beginning. This problem does not just appear on my deskop, but aslo while gaming. The corners i look at while playing csgo for example, gets this black line behind. This doesn't happen while standing still.

An important thing to notice is that this aslo happens if i play at 60hz or if i play on my PS4.
Switching to the HDMI cable didn't work.
I also didn't manage to download the ASUS vg248 software.

Probably not the best explanation, but a solution to this problem would be appreciated!

Probably not the best pictures either, but may help you get an idea of what i mean.
 

A:Problem with my new ASUS VG248 monitor.

7 more replies
Answer Match 43.68%

Hi All,

I have a Asus VK278Q Monitor with integrated webcam
https://www.asus.com/us/Commercial-Monitors/VK278Q/
The software that came with the webcam was called LifeFrame and I remember it last working with Windows 7
I tried to install it with on Windows 10 (64 bit) I currently have but its not compatible (installs ok but does not open) and I don't see any other options on the Asus site for it.

Tried opening using Run as Admin and nothing
Tried Compatibility Troubleshooter and nothing

I remember the app for this being real crappy too.

Any other way to install this webcam via Windows 10 and just have windows detect the webcam for using in apps??
Anyone else had this problem happen and resolved it??

Please Help!!

A:ASUS VK278Q Monitor Webcam

Hi,

Give this a try:

Update ASUS MultiFrame Software
Download ASUS MultiFrame Software
Install ASUS LifeFrame 3.1.13
Download ASUS LifeFrame 3.1.13

more replies
Answer Match 43.68%

Hello,

I wanted to get the forum advice regarding my PW201 monitor, it stopped working today :<
it has USB hubs on the side and if I attach USB device then that device works.
the monitor power button is touch button and I suspect that that is the problem but I don't know how to check

Thank you.
 

A:Asus pw201 monitor would not turn on

7 more replies
Answer Match 43.68%

I'm looking to replace my ancient Dell E173FP monitor. After some research I've settled on these two choices due to my budget (~$170)

http://www.amazon.com/Asus-VS247H-P-23-6-Inch-Full-HD-LED-Lit/dp/B005BZNDS0/ref=cm_cr_pr_product_top
vs
http://www.amazon.com/AOC-i2367Fh-23-Inch-Screen-Monitor/dp/B009V8F700/ref=cm_cr_pr_product_top

I'm having a hard time deciding between these two, from what I've gathered so far, these are the pros and cons of the two monitors, I'm not too tech-savvy so I could be wrong.
ASUS:

pros:
- slightly bigger (23.6 inch)
- has a lot more reviews and slightly higher rating on amazon and suggested by many on the internet as a good low-budget monitor

neutral:
- has an overall better look than AOC
- 2 ms response time (not a big deal to me)
- I've heard of good and bad things about the costumer service
- mixed reviews about color quality

cons:
- many complaints about defective pixels and apparently Asus does not cover them
- many complaints about flimsy/wobbly stand
- some complaints about the monitor having various types of screen defects after some time
- not an IPS panel
- no integrated speakers
AOC:

pros:
- IPS panel (better image)
- slightly cheaper at the moment

neutral:
- 5 ms response time (not a big deal to me)
- I know it isn't bezel-less, I'm not looking for a dual monitor setup so it doesn't matter to me, however the black border does look a bit awkward
- some people... Read more

A:Which monitor should I buy? Asus VS247H-P or AOC IPS i2367Fh?

You outlined the pros and cons well . This is my opinion: go with the AOC since it has an IPS display (better colors), small bezels (allows for a better multi-monitor experience), is IPS + LED (the ASUS is only LED) and it has 2 HDMI inputs (vs 1 on the ASUS). The average reviews may be higher for the ASUS but the AOC seems like a more attractive option overall. This is just my opinion .
 

1 more replies
Answer Match 43.68%

Hey guys, I recently purchased this motherboard and installed it yesterday. I correctly installed the mobo, cpu and the cables to the hd and other components. I was wondering why my monitor does not power. I tried plugging it to my external VGA card (Radeon 9200) and the built in VGA. Nothing goes to the monitor.

P.S. I'm using a Intel Celeron 340 2.93GHz.

Thanks!
 

A:ASUS P4V8X-MX - No monitor input

I used to have that mobo... its very reliable. Try plugging the monitor cable in the other way. I've found that they fit on the right way and the wrong way so try putting it the other way.
 

3 more replies
Answer Match 43.68%

My friend hit his laptop with a flyswatter and messed up the monitor. I tried connecting it to an external monitor but all I get is a screen saver. I can use the mouse to open programs but they won't open on the monitor. Does anyone know how to disable the laptop monitor? It's a touch screen.

More replies
Answer Match 43.68%

Despite going through the basic steps in disabling any other playback device but my monitor, I am still having trouble getting any sound on my monitor. I have an Asus VS238H-P and it is plugged from my laptop by a HDMI cable. Here is what I currently have:




Any idea what is wrong? If any additional information is needed, I'd be glad to provide it to you.

A:No sound via HDMI to ASUS Monitor

tnguyen9175 welcome to the Seven Forums.

Is this the monitor?

http://www.asus.com/Monitors_Projectors/VS238H/

If so it doesn't have any speakers in it. What it has is a headphone jack on the back, which would require self powered speakers of headphones to get sound from it.

P.S. You also don't have the driver for the built in audio, as it is showing as "high definition audio device". It would show the proper name of whatever the built in audio is (Realtek, IDT, etc) with the proper driver installed.

1 more replies
Answer Match 43.68%

This problem that I am having is that the monitor constantly gets dark then bright on the upper portion of my monitor (flickering). Can someone please help me it is a very annoying problem.
 

A:ASUS VE276 Monitor Problem

Hiya julius and welcome to TSG.

Looks like a nice monitor and especially in that price range. Make sure you`re running the correct and up to date drivers for your graphics card and system and set the resolution to it`s native 1920 x 1200 (16:10). Perhaps fiddling with the refresh rate might help too.

Jenny
 

2 more replies
Answer Match 43.68%

Hi All,

I have a Asus VK278Q Monitor with integrated webcam
https://www.asus.com/us/Commercial-Monitors/VK278Q/
The software that came with the webcam was called LifeFrame and I remember it last working with Windows 7
I tried to install it with on Windows 10 (64 bit) I currently have but its not compatible (installs ok but does not open) and I don't see any other options on the Asus site for it.

Tried opening using Run as Admin and nothing
Tried Compatibility Troubleshooter and nothing

I remember the app for this being real crappy too.

Any other way to install this webcam via Windows 10 and just have windows detect the webcam for using in apps??
Anyone else had this problem happen and resolved it??

Please Help!!

A:ASUS VK278Q Monitor Webcam

Hi,

Give this a try:

Update ASUS MultiFrame Software
Download ASUS MultiFrame Software
Install ASUS LifeFrame 3.1.13
Download ASUS LifeFrame 3.1.13

0 more replies
Answer Match 43.68%

I apologize if this is in the wrong forum ahead of time.

Basically, I want to buy a new monitor for around 200 bucks. Most of my daily activities on my computer consist of typing on Office (school work), watching youtube and/or divx movies (usually avi format), on occasion playing 2d yahoo chess or other simple games, chatting on trillian, browsing social networking sites, and listening to music. I almost never play games. I may play one every once and a while, but it is really, really rare.

So which of these is better suited for me:

Asus 24":
http://www.newegg.com/Product/Product.aspx?Item=N82E16824236049

Samsung 23":
http://www.newegg.com/Product/Product.aspx?Item=N82E16824001317

Some people tell me the Samsung is better, while others say the Asus is because of the response time. I don't mind the extra 20 bucks for the Asus, considering it seems to have some better specs, like response time, which allows me to see more detail.

What do you recommend?
 

A:Asus or Samsung monitor...(need a recommendation)

They both have good enough specs to do what you need.
So it's a matter of preference,which do you like better.

If you can handle one that is a little smaller,you can get
this for $99 with free shipping.
Unless you actually need the hdmi input.
Staples.
 

3 more replies
Answer Match 43.68%

please help me when i turn on my monitor it says vga no signal, i dont have a graphic card, it was working fine b4 idk why it start happening now :/i tried to re plug the cable and that didnt work and everything else i can think of, please someone help me.

A:my screen asus monitor says vga no signal

did you push the wrong button on front and switch the input

5 more replies
Answer Match 43.68%

I am at my wits end on this one. I need help before I go completely insane.

Working on building a nice little computer for my personal use, its a true Frankenstin Monster to begin with.

My mobo is an ASUS P4SGX-MX (socket 478)
The on-board grpahics card is the standard SiS
I installed a left over NVIDIA GeForce 2 MX/MX 400 (given to me by a friend for free)

I would like to have two monitors working at the same time on this PC. Here's what I've done so far. (please bear with me, its 3 hours pass my bedtime and I am delirious with fatigue)

In the bios, I set the onboard as the primary and the monitor on the right works, the display adapter in Windows XP Pro only shows the SiS adapter, and not the GeForce

In the bios, I set the primary to AGP and the monitor on the left works but the one on the right does not. Windows shows the GeForce adapter but not the SiS

In the bios I set the primary to PCI and get the same results as setting it to the AGP as above.

I know I have the monitor resolutions the same on both, but I also noticed that with which ever monitor working, the IRQ is automatically set to 16 (is this a problem?)

Has anyone been able to get dual monitors to work with this mobo?

A:Dual Monitor w/ Asus mobo

welcome

i believe you need a video card that has dual screen outputs.
or

check out video splitters here

7 more replies
Answer Match 43.68%

My laptop screen on my asus Eee 1001ha has broke and I want to plug it in to a monitor. When I plug it in to the monitor it shows the windows start up screen but then goes blank. Ive tried pressing (fn)+f8 but I have a log in screen which I have to get past before I am able to press (fn)+ f8 to make it work. I cant see my log in screen so therefor am not able to get past it. Is there any other way to get my laptop to connect to the monitor? or is there anyway to reset my computer so it doesnt have a log in screen ? Please help !!
 

A:How to get my asus Eee 1001ha to connect to the monitor?

11 more replies
Answer Match 43.68%

I have installed the board with an Athlon xp 1700. all is well but at the post I get that the monitor has found an erro0r in the Power part of the bios setup menus. If I ignore it and go on all is ok but I checked everything and can't find an error.
I downloaded a new BIOS from ASUS a7v8xx05.zip but it would not install. Says "different model of bios" What gives? Can't get a rtesponse from ASUS Tech.
Thanks,
Bob
 

A:HDW Monitor Error Asus A7v8x-x

Probably the wrong model of system board, if a different model BIOS. Are you sure the one inside your machine is an A7V8X-X? Check your documentation.
 

2 more replies
Answer Match 43.68%

Hi,

Ive bought a new widescreen 22" Asus monitor and I have it plugged in to my m9750 alienware laptop. I have recently installed the newest drivers from alienware (card is Nvidia Go 7950 GTX ) .

Im running windows xp, 2gb ram, 200gb drive.

I have posted a youtube video showing my problem. http://www.youtube.com/watch?v=4UHLyTGQuDQ

How can i solve this flickering? Im going to plug the monitor to my other PC when I get a chance and see if the problem presists so I can see if the problem is coming from the monitor or the actual configuration/grafics card of my laptop.

Thanks in advance.
 

A:Asus VW221D monitor flickering

b.u.m.p. ^_^
 

1 more replies
Answer Match 43.68%

I can not for the life of me figure this one out!

Asus a8v
amd 64bit 3200
ati radeon 9600xt
Windows XP Home SP2

I should start by saying that I downloaded the catalyst control center from ati.com and loaded the latest drivers from there. However, after, thats when the problem started. Whenever I try to open anything my monitor magically shuts itself off but my computer stays on. When I turn my moniter back on it shows that I dont have a signal for like 3 seconds and then BOOM, my computer restarts itself.

I found a slight fix to the problem...I removed the catalyst contol center from my computer and removed the video card drivers. I then grabbed the CD that came with my 9600xt to load the drivers off of it (they are very old drivers). As old as the drivers are, they fixed the monitor shutdown problems. However I recently bought Battlefield 2 (direct X 9.0c) and I just knew it was going to be "buggy" due to the fact that my drivers are so old.

I want to play this game but Im kind of in a pickle here. I need to update the drivers but I know what problems this causes. Any help would be greatly appreciated.

-A. Isakson
 

More replies
Answer Match 43.68%

I've enjoyed a lot of the useful information from you all on this forum. My problem is that when I connect my Acer Aspire 5810T Laptop to my Asus Monitor MT276 via HDMI, I get video on my Asus but no sound through its speakers. I'm getting sound through my laptop though.

I'm unable to see the HDMI sound icon when I use "Manage Audio Devices" even though I checked to show disabled and disconnected devices. I think it may be because of my graphics or sound card (which I've tried updating via device manager but still no luck).

My system specs are to the right and if you require any other information let me know. Any suggestions on how I can get sound through the monitor's speakers?

[SOLVED]

I now get sound and video via HDMI through my Asus monitor. The way I got it to work was by updated my chipset driver to an older version.

Steps I took:
1) Go to Device Manager
2) Open Display Adapters and right click and select Update Driver Software
3) Select Browse my computer for driver software
4) Select Let me pick from a list of device drivers on my computer
5) I then was given a list of drivers and selected the oldest version (2/26/09)

I restarted my computer and plugged in the HDMI and the HDMI icon magically showed up when I went into Playback Devices.

I have updated the OP to show my solution. Thank you all for your help. You guys have a very good community here.

A:No sound via HDMI to ASUS Monitor

Go to the Control Panel/Hardware and Sound and finally the Sound panel. If you have HDMI Audio, there will be an icon for this. Set this as the default playback device and that should get you HDMI Audio.

9 more replies
Answer Match 43.68%

Not sure this post belongs here....
I am considering getting an Asus VN279QL monitor 27". It is slightly used.
At the moment I have an Acer X243w 24"
The Asus monitor says its native resolution is 1920 by 1080. While that of the Acer is 1920 by 1200. But the Asus says it's Full HD. Would that make the Asus monitor better even though its resolution is lesser?
The Contrast ratio on the Asus is considerably higher.
And the Asus monitor is much more recent than my Acer.
Is it worth getting this monitor now? Or should I still hang in there for a year or so before it's worth getting a better monitor?
I am using a Geforce GTX 950.
I use both Windows 10, and Ubuntu.

More replies
Answer Match 43.68%

so i got a computor from another guy and tested it there and everything worked but now at home the monitor says "dvi no signal". i tried it with hdmi too and it didn't work. i have no idea what the problem is. it worked before and nothing has been touched or anything inside it. does any1 have any ideas as to why this happened?

A:DVI no signal Asus lcd monitor VG248

Since you are using a monitor I'm going to assume this is a desktop computer.
 
What is the make and model of this computer?
 
Is the monitor being used known to work?
 
Does this computer have a dedicated video card as well as integrated graphics on the motherboard?

1 more replies
Answer Match 43.68%

ASUS VS24AH-P 24-Inch LED-Lit Monitor



I been using this monitor for many months connecting it to my laptop without any issue. However there has been times when i would see No signal on my monitor but screen would then work as usually. Recently when i started my computer, i got this message and monitor doesn't work at all. I use HDMI to HDMI as my laptop has hdmi port. Monitor doesn't work at all. I made sure i am in hdmi mode in monitor and still nothing works.


Does anyone know whats the issue here? It just stopped working.

A:Asus Monitor HDMI No Signal?

Sometimes this can be a "Handshaking" Issue. Try powering down the laptop and unplug the monitor. (never plug or un plug HDMI while hot) when you have the hdmi cable plugged in, plug power to monitor and restart, that may help.

1 more replies
Answer Match 43.68%

My problem is that when I connect my Motherboard to my ASUS VS247HR 23.6 Monitor via HDMI,
I get display/video output fine but no sound through its speakers.
Device Manager Screenshot:

Hardware and Sound:

System Specs:





Windows 10 Pro x64
Cooler Master: MasterCase 5
VS Series? VS650 ? 650 Watt Power Supply
GIGABYTE - Motherboard - GA-H170M-D3H
Hydro Series? H55 Quiet CPU Cooler
Intel? Core? i7-6700K Processor (8M Cache, up to 4.20 GHz)
G.SKILL Ripjaws 4 Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM
NVIDIA GeForce GTX 750 Ti
Samsung SSD 850 EVO 500GB
ASUS VS247HR 23.6" Monitor, FHD (1920x1080), 2ms, HDMI, DVI-D, D-Sub
Logitech Media Keyboard & Mouse Combo MK200
D-Link DWA-123 Wireless N 150 USB Adapter Revision D

More replies
Answer Match 43.26%

Hello,

I recently purchased an ASUS 6950 2GB DirectCUII Graphics card with the crazy idea of hooking up more than 2 monitors. The card looked decent, claimed to be able to run 6 independent monitors concurrently. I currently have 2x24" monitors and a 37" 1080p TV that i'm trying to hook up. The setup is:

DP = Standard DisplayPort

DP1 - none
DP2 - DP to HDMI cable to monitor 1
DP3 - DP to DVI adapter to monitor 2
DP4 - DP to HDMI to TV
DVI1 - none
DVI2 - none

I've tried all different set-ups, bit this is what I am trying at this moment. The problem is this: I can only run 2 screens concurrently. Every time I try to enable the third output, Windows pops up an error message saying "Unable to save settings" and CCC Isn't much help to anyone (It pops up a similar message).

So, how can I get my 3 screens all running together?

Thanks
 

More replies
Answer Match 43.26%

My current setup involves a single monitor, DisplayPort connection, and 1920 x 1080 desktop resolution. No matter what settings I try my games and videos are blurry and appear to render at a much lower refresh rate than they should.

I've fiddled with the monitor, and found that setting trace free at 100 enables a weird ghosting effect, which is not so bad at 80. I've switched between DisplayPort and DVI-D Dual Link, going so far as to switch the DVI between the Analog and Digital outputs of my Graphics Card with little-to-no difference.

I have played several games with the Fraps framerate display enabled: Dragon Age: Origins, Deus Ex (the old one), Descent: Freespace, and Skyrim. The framerate remained above 120 fps in DAO, a constant 144 in Deus Ex (with the special launcher), 120 in Freespace, and 144 in Skyrim (though 144fps Skyrim is too buggy to play). I have also tried various Vsync settings to no avail.

They all appear blurry when they should be sharp, and I get screen tearing on some games. My mouse has a relatively low dpi, so I only test the visual quality using keyboard commands. Using the UFO Frame Test, the image is blurred in four possible refresh rates: 144, 120, 100, and 85. I have also installed the Toasty X Strobelight tool; whether Lightboost is on or off, the only difference is in monitor brightness.

I upgraded to a proper gaming computer several months ago, because I have heard that the jump from 60 to 120+ is at least noticeable (if not bea... Read more

A:Asus VG248QE Monitor is blurry at 144hz

You need to check and see what the highest NON-INTERLACED refresh rate your monitor can support and use that or lower.
 

1 more replies
Answer Match 43.26%

Im not really sure what is going on, it happened while playing a game. once i changed the res the monitor went black and says out of range. Ive been working all day and night trying to get it back but nothing seems to help. Any ideas?
 

A:Out of range...external monitor asus vg248qe

It seems like you adjusted the resolution to an unsupported size. Boot the computer into safe mode and this will adjust the resolution for you. Once started in safe mode, reboot the computer and see if you can log back in normally.
 

2 more replies
Answer Match 43.26%

HI All,

its been 24 hours since my Win 7 ultimate edition installation, and still i have not managed to get my dual monitor working.

I was running Vista OS for 2 years and was working everything fine. But now with Win 7 my second monitor (Samsung Syncmaster 2333) is not being detected.

I went in the Asus driver page and it seems that for the Standard Vga grafic card there is still no driver for Win 7, is this possible?

If it is really like that, how can I get my dual monitor working? I thought about buying an external graphic card...is this the only solution or am i missing something?

Any help is appreciated!

Thanks,
Gabriele

A:Standard VGA (Asus) does not detect dual monitor with Win 7

To tell you the truth i heard ways of doing this but your onboard vga adapt might not be strong enough for dual screen support

I can tell you i run dual monitors off the same vidcard im sure i can throw a third one in the mix off my vga but your mobo should give you the specs on the onboard adapter where it should give you in full detail the capabilities

If not i suggest getting a video card that fits the bill also make sure you have adaquete power to supply the card or the upgrade will be meaningless

6 more replies
Answer Match 43.26%

Hi all please help me decide with which model should I really go for as I have little time and I need to buy a new monitor today in the evening as I got a call from the store that the displays has arrived by Asus.

1. ASUS VX239H
2. ASUS VX248H

Now they both have some differences so please do click the link below to see both of the specs and tell me which one should I go for?

Asus VE247H 23.6" Monitor vs. Asus VE248H 24.0" Monitor vs. Asus VX239H 60Hz 23.0" Monitor vs. Asus VX248H 60Hz 24.0" Monitor - PCPartPicker Australia

VX239H is a 23.0" Display with IPS Panel + Built In Speakers + 5ms Response Time + 2x HDMI
VX248H is a 24" Display with LED Panel + Built In Speakers (not confirmed) + 1ms Response Time + 2x HDMI

More replies
Answer Match 43.26%

Hi Guys,

Please help. This is my first build. I have put everything together and plugged into my monitor and powered the PC on but there is no picture. I have checked all connections and haven't missed anything. I am sure that all components are compatible.

I have tried both on-board and dedicated graphics slots and VGA and HDMI.

After doing some research it may be the BIOS. But I am not sure how to update those without a picture.

Mobo: ASUS M5A78L-M/USB3
CPU: AMD (Piledriver) FX-6300 3.50GHz
RAM: 8GB (2x4GB) Corsair Vengeance Jet Black 1600MHz CL9 DDR3 Dual/Quad Channel
Graphics: Asus Radeon R7 360 OC AMD Graphics Card 2GB
PSU: 500W - EVGA 80+ White Rated Power Supply

Thanks in advance

A:Please Help! ASUS M5A78L-M/USB3 No Picture on Monitor

Hello

You may want to do the cardboard test...Take out all the internal parts,assemble them on a piece of card board and power up with monitor of course...What happens? If the parts work as expected then you may have a grounding issue ,1st thing check your stand offs and rubber/plastic, or the insulated grommets to make sure they were in the correct place. Prior to taken the parts out make sure the MOBO isn't touching the case.. If the issue still exist check your ram one per slot to see if it is a faulty ram stick..

3 more replies
Answer Match 43.26%

Hello,

My son threw a toy into it and now the screen is shattered as you can see. I wonder if anyone could give a a repair estimate or suggest where to get one.
There are no electronics repairs shops close to where I live and I don't want to pay for shipping sending it to ASUS. I need estimate for my insurance.

A:Repair estimate for ASUS PG278q monitor

In most cases the repair would be more than replacement and the vale for ins. would be the replacement price being that screen is most of the cost of it. Other than that Asus would be the only real option.

2 more replies
Answer Match 43.26%

Hey guys,

Basically I was wondering how would I set up my Asus VS238H-P 23-Inch Full-HD LED-Lit LCD Monitor.

I have a HP Pavilion all in one computer

http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=4007499

The computer has no HDMI Cable in the back or a DVI or VGA. All It has is USB and LAN ports.

I wanted to hook it up so i can use my xbox 360 on it.
 

A:How would I set up my Asus VS238H-P 23-Inch Full-HD LED-Lit LCD Monitor

Closing duplicate too: http://forums.techguy.org/hardware/1100936-how-would-i-set-up.html
 

1 more replies
Answer Match 43.26%

I recently got this amazing 1080p monitor for my custom rig and I love it! Well... most of it.
There is this problem with the backlight, where when the monitor turns on after a while of inactivity, the backlight turns on for a split second, then suddenly goes very dim. The brightness setting is unchanged; kept at a solid 70, yet it's a quarter as bright as it should be. I can go into the menu and change the brightness, and I can tell, faintly, that it does adjust, but never up to the proper level.

To remedy the issue, I repeatedly turn the monitor off and on until the display finally lights up properly, and it stays that way for the entire time I am using it. At the start of the session in which I write this post, I had to do this at least 20 times before it worked, so I finally decided to really look into this problem.

It seems this is a unique issue, as I found absolutely no matching posts on the interwebs by searching with the all-mighty Google Search. Is there anyone that can provide some insight as to why this occurs, and/or how to fix it?

Thanks for your time.
 

A:Issue with an ASUS VK-248h Monitor Backlight

New theory: Bad capacitors... somewhere. Possibly power supply

After a day at work, observing some coworkers working on used LCD TVs (and working on one myself), I now understand quite a bit more about such things.

I had removed the display from my setup and left it on the floor for a few days. Today, I decided to try it again. The backlight started up perfectly fine, surprisingly. The ASUS screen showed for a couple seconds, then went off, as normal. Then, when it's supposed to activate the selected display input, it shows the screen for just long enough to get half a frame drawn, then goes completely black. Turning monitor off and on repeatedly, and trying different input methods, gave same result. I got it to work once, but at that time the backlight had gone too dim again.

I think now I might know how to fix it, but I can't for the life of me figure out how to take the dang thing apart! Lol.
 

1 more replies
Answer Match 43.26%

Hey guys,

Basically I was wondering how would I set up my Asus VS238H-P 23-Inch Full-HD LED-Lit LCD Monitor.

I have a HP Pavilion all in one computer

http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=4007499

The computer has no HDMI Cable in the back or a DVI or VGA. All It has is USB and LAN ports.

I wanted to hook it up so i can use my xbox 360 on it.
 

A:How would I set up my Asus VS238H-P 23-Inch Full-HD LED-Lit LCD Monitor

7 more replies
Answer Match 43.26%

I have an ASUS VS247HR monitor plugged into my pc with a hdmi cable which worked fine, until suddenly my screen went black and it didnt work anymore. I wasnt doing anything with it when it happened. Eventually I got it working with a VGA cable but it doesnt recognize my monitor any longer as an ASUS monitor, it just says "Generic PnP Monitor". I checked for driver updates if that had screwed things up and it did, so I rolled it back but I still have the problemI would really like to be able to use my HDMI cable because VGA lowers my resolution to 1024x768

A:W10 PC suddenly stopped recognizing ASUS monitor

That's strange, according to what I saw in Google the native resolution for that monitor is 1920x1080. I use a monitor with the same native resolution on Win 10 (previously Win 8.1) and it is happy to select that as default without HDMI.It might be worth trying the monitor on another computer to see how it behaves because right now I'm not sure whether it is the monitor or computer that is at fault.Always pop back and let us know the outcome - thanks

2 more replies
Answer Match 43.26%

Hi all. I just picked up an ASUS VH242H 1080p HD monitor. 23.5 or 24" newegg said 23.5 but not too sure. Seriously is awesome when playing games or watching video, but when I'm just sitting on the desktop there seems to be something wrong. The lines along the task bar seem to be blurry or flickering. Also when running an application like this website for instance, the text and links and lines all are blurry or flickering as well. Its actually really bad on this forum lol.

I currently have the resolution set to 1920x1080 and this seems to be the only resolution that this occurs on. All else its perfectly fine but just not the standard setting for this large monitor. I have not installed any drivers because I can't find any. I have an NVIDIA GeForce 7900 G/GTO.

Here is a copy of my display system information pulled from the NVIDIA control panel.

NVIDIA System Information report created on: 05/15/2010 01:55:55
System name: NOV4K1086

[Display]
Processor: Intel® Pentium® D CPU 2.80GHz (2793 MHz)
Operating System: Microsoft Windows XP, 32-bit (Service Pack 3)
DirectX version: 9.0c
GPU processor: GeForce 7900 GT/GTO
Driver version: 190.62
Core clock: 450 MHz
Memory clock: 660 MHz (1320 MHz data rate)
Memory interface: 256-bit
Memory: 256 MB
Video BIOS version: 5.71.22.35.92
IRQ: 16
Bus: PCI Express x16

[Components]

nvCpl.cpl 2.7.130.30 NVIDIA Control Panel Applet
nvCplUI.exe 2.7.130.30 NVIDIA Control Panel
nvWSS.dll 6.14.11.9062... Read more

A:Parts of screen flickering on new ASUS monitor

Also when I change color from 32 bit to 16 it is perfectly clear, no bouncing/fuzzy/flickering text or lines or links and such.

2 more replies
Answer Match 43.26%

I just bought a "22 ASUS mx279h monitor For my ps4. Strictly for my ps4 and it was working for the first couple days, then it went to a grey screen. I hear my ps4 when I move the joystick through my headphones. When I click to a different HDMI it shows the screen changing to it, but when I go to the one with my ps4 on it it says no signal or have a pitch grey screen no responding. when it was working the previous night. Can some one reply to me!

A:Grey screen for my ASUS mx279h monitor

Three possibilities :- 
 
First and simplest, the cable could be faulty. Try a different cable, borrow one if necessary.
 
Second, the output from your PS4 could be faulty. Try it on a different monitor, perhaps a friend's.
 
Third, there could be a fault on the monitor. Try a different signal source on the socket you are using for the PS4 and try the PS4 in a different socket.
 
If the cable and the PS4 test OK then the fault lies in the monitor. You say you have just bought it. Have a word with your supplier about replacement.
 
Chris Cosgrove

1 more replies
Answer Match 43.26%

I'm trying to use an external Samsung TV/monitor (model LN-T2642H) through HDMI. The native resolution of the monitor/TV is 1360X768, which is also the native resolution of ASUS T100.
If I try to use the monitor/TV as the only display, the device selected is Generic PnP Monitor and the native resolution of 1360X768 is not available for selection. Intel HD Graphics Control Panel only shows 1280X720 (selected) and 1920X1080 (too high for my monitor).

Is there a way to set up the 1360X768 resolution with the existing driver (up to date)? Is there another driver that I can download and that will allow this resolution? Can I use a different version of the Generic PnP Monitor that allows 1360X768 resolution?
With the only resolution available i.e., 1280X720 the quality is bad.

Many thanks,

A:Low resolution on external TV/Monitor (ASUS T100 Win 8.1)

On the screen resolution window, click advanced settings. Then click "list all modes" under the adapter tab. Now see if what you want is listed.

6 more replies
Answer Match 43.26%

Hi all,

My soundcard is an ASUS D2X
My Monitor is an Asus MX279H

My problem is I can't get the monitor to route the sound to just my soundcard and take advantage of using 4 speakers. I've tried using a 3.5 plug from monitor to soundcard with no joy.

The only way I can use the monitor speakers is if I select MX279-C as default but then obviously I can't use my soundcard or creative speakers.

I've attached a screenshot of my sound options.

Many Thanks

A:Asus MX279H Monitor and Soundcard Trouble

Windows will only allow one "default audio playback device".

I don't understand exactly what you want or want to do.

5 more replies