Tech Problem Aggregator

Psx Driver for ps controller doesn't work

Q: Psx Driver for ps controller doesn't work


please anyone know how to make this driver work under windows-7 64-bit or vista>

it works fine under 32-bit>

i think it's easy to edit this driver to work under 64-bit or maybe there is another solution that i don't know>

thanks in advance>

A: Psx Driver for ps controller doesn't work

Hello TheEvil

You might want to checkout the Windows 7 Forums for all things Windows 7


1 more replies
Answer Match 65.52%

Shucks.. just received this today and it doesn't work for squat. I'm trying to get my wireless controller to work on my 64x vista with the receiver. I've installed the necessary driver and software as well. Think I can get this working? Or do I just have to buy a wired controller, assuming that even works.

The USB is connected directly to the mob, so it's not power related. I've restarted and disconnected all other usb connections. Also those little signal buttons don't help either.

Again I'm hearing this a common problem. Either because my pc can't pump out enough power for it, even though it's high end. Or there are driver conflicts between the receiver and any logitech mouse/keyboards.

A:360's Wireless Receiver/Controller Doesn't Work

Originally Posted by Snowee

Shucks.. just received this today and it doesn't work for squat. I'm trying to get my wireless controller to work on my 64x vista with the receiver. I've installed the necessary driver and software as well. Think I can get this working? Or do I just have to buy a wired controller, assuming that even works.

The USB is connected directly to the mob, so it's not power related. I've restarted and disconnected all other usb connections. Also those little signal buttons don't help either.

Again I'm hearing this a common problem. Either because my pc can't pump out enough power for it, even though it's high end. Or there are driver conflicts between the receiver and any logitech mouse/keyboards.

i had the same problem, but i had this problem because of my mouse, its a razer lachesis banshee V2 (eats the power because of the pulsating snakes), all i did was plug in an externally powered usb hub and plugged my wireless reciever into that and it works.

3 more replies
Answer Match 65.52%

As title says. My Xbox One wired Controller works great with all games I have, except for Gears of War.
Any suggestion?

More replies
Answer Match 65.52%

When I click on "Devices and Printers" there's a little yellow triangle next to the icon for my computer. When I right click and click on Troubleshoot I get a message that says: "The driver for the network controller not installed. Install the latest driver." After I "apply the fix" (looking online for a driver) I briefly see a message that indicates the system is intalling drivers for devices, but then it says that the driver installation failed. I downloaded the latest drivers for NVIDIA nForce 630i from the NVIDIA site, and installed it, but I still get the "Network controller doesn't have a driver" message. I've tried to update the driver, but it never finds it online. Am I missing something here, like a driver? I downloaded the Pitstop software and scanned my system, and it says I have all the latest drivers.

It's a Gateway computer, and I did a clean install of Win 7 Pro, because it came with Vista HP. I'm a bit perphlexed. I have had some network problems in the sense that other computers on the network can't see my Windows 7 shared drives, but I can see theirs.

[Update: I went to the Gateway site, entered my serial number, and downloaded the chipset driver pack, and the network driver itself. When I tried to install the network driver after unzipping and extracting everything, by using "update" in preferences, I got a message that the driver wasn't found. After that I just ran the setup for the chipset whi... Read more

A:Help: Network controller doesn't have a driver.

Quote: Originally Posted by freewheeling

After I "apply the fix" (looking online for a driver) I briefly see a message that indicates the system is intalling drivers for devices, but then it says that the driver installation failed.

You will get this message if your system doesn't actually make an internet connection.

In Device Manager, do you still have a triangle?

9 more replies
Answer Match 64.68%

Hi All,

That is message, but I don't know what to do. This is how it came about.

My husband built my CPU which is great when it works and when it doesn't, I have to wait until he "FEELS LIKE IT" to work on in it --- almost 2 months and I am still waiting.

After vacation, I was getting an error message while trying to bring it up and my husband reloaded a couple of corrupted drivers - don't ask me which ones, he was too busy to articulate it. But the problem is now that doesn't recognize my Microsoft Wireless 5000 keyboard and mouse -- it will however work with a wired keyboard, wired mouse, printer, scanner and sound. I replaced the batteries, moved and reset the doggle, deleted and reloaded the drivers from microsoft to get the most current and still doesn't recognize it. I went into troubleshooting hardware from the control panel and the last message I got was "PCI Communications Controller Doesn't have a Driver" --- what do I do? Is this even the problem? And by the way, the husband is now out of the country and I am not waiting on him any longer.

Other info:
Processor: Intel R Pentium R D CPU 3.40Ghz 3.40 GHz
64 Bit Operating System
Windows 7 Professional

Thanks for any help!

A:PCI Simple Communications Controller Doesn't Have A Driver

Hi Janet .. What is the Make and Model Number of your Computer ? .... Go to the Device Manager in the Control Panel ...

You should see a Device there which has yellow exclamation mark beside it ...

Select that Device right click on it then Property's / Details Tab .. And Post the Hardware ID please ...

9 more replies
Answer Match 64.68%

Please help me...Thank you in advance, DANBOT1 HP Compaq dx-7300 Slim Tower Base DT PCp/n ET114AVHP S/N CNG71904Z7HP Care Pack lookup part number RB868AVJOY SYSTEMS REFURBISHED/WALMART WINDOWS 7 HOME PREMIUM REFURBISHED PC'S SERVICE PACK 1 32 BITFULLY UPDATED AS OF 06-01-2016MOBO Hewlett-Packard 0A54h (XU1 PROCESSOR)... PCI SIMPLE COMMUNICATION CONTROLLER DOESN'T HAVE A DRIVER ERROR CODE 28 PCI\VEN_8086&DEV_2994&SUBSYS_281103C&REV_02PCI\VEN_8086&DEV_2994&SUBSYS_281103CPCI\VEN_8086&DEV_2994&CC_078000PCI\VEN_8086&DEV_2994&CC_0780


Hi, Please try Intel Management Engine on the following site:   Regards.

1 more replies
Answer Match 64.26%

I got a gamestop brand xbox controller by mad catz and when I plugged it into my pc it tried to install the drivers but could,'t so I got the controller drivers from Microsoft's website didn't help then I got the driver from Madcatz official website that didn't help either. I would really appreciate it for any solutions

A:Got a gamestop brand xbox controller by Mad Catz but doesn' work on pc

Through experience I've found that only official Microsoft Xbox controllers work well with PCs, any other brand, or no-brand for that matter, cause problems like this more often than not. I'd return it for a refund and purchase an official controller.

2 more replies
Answer Match 64.26%

TL;DR version: XBox 360 controller, when connected makes sound, but doesn't function, and further connection/disconnection doesn't makes system sound, and also prevents shutting down. How can I solve this. In the mean time, I will uninstall the driver the best I can.

Long winded version
When I tried to install dual boot a Linux, (that I wasn't doing the first time) I accidentally deleted my Windows 7 partition (instead of partition the free space left) and needed to restart the whole installation of my Windows from scratch. (The irony is that I was able to install everything I needed during one weekend the way I wanted id, but since I've wiped my Windows partition last month, I still didn't quite installed everything back the way I wanted it. One plus side is that NVidia Geforce Experience is not telling me that it has run out of drive space anymore. )

I have in this Desktop PC two drives, one SSD with 200GB partition for Windows, and a 2TB HDD with 1TB for Windows data. After Windows installed, I went in to Audit mode, and configured the Users and ProgramData folders to be on the 1TB HDD, and later made Symlinks to these folders on the C: partition, so even programs, that can't comprehend the ProgramData and Users folders being on a different partition can work as I would like them to. (I do not wish to debate whether it is a correct way of using Windows or not.)

With great care this time, I was able to install Windows to my liking, and fairly stable, with one exception, ... Read more

A:XBox 360 controller doesn't work when connected, and prevents shutdown

I would uninstall the device and the driver and check to see if there is a updated version of the driver for that device. Give that shot and see what happens.

4 more replies
Answer Match 62.58%

I downloaded the driver "Lan_Pro-Nets_2.22.51104_XPx86" which is supposed to be for the ethernet controller but it doesn't work.The readme file says this:IC Plus IP1000 Family Gigabit Ethernet Adapter Windows NDIS driver Contents:---------1. File Description2. Driver Installation for Windows XP3. Parameters Description1. File Description-------------------Filename Description================= =====================================================README.TXT Presents a summary of the contents for Windows NDIS driver installation.NETIPGD.INF Windows installation INFormation file for installIPGDND51.SYS Windows XP NDIS 5.1 driver 2. Driver Installation for Windows XP------------------------------------------------ The Windows installation floppy or CD is needed to complete this installation. Adapter Installation Procedure -------------------------------------------- a. Make sure your computer is power-off. b. Plug the adapter into one PCI 33MHz slot of your computer. c. Turn on the power. Install and/or Update driver from diskette ------------------------------------------ The following steps can help you install or update the driver to the one in the Adapter Drivers Diskette/CD-ROM. a. Open Control Panel, double click "System" icon to open System Properties. b. In the "Hardware" sheet, you can see the "... Read more

A:Ethernet Controller Driver won't work

Well after days of searching I finally found out the manufacturer of the ethernet controller, it is an Intel® and some numbers, and I went to the INTEL website and got the appropiate driver and installed it and hooray I have the ethernet working and the net.

2 more replies
Answer Match 59.64%

I recently bought a C.D. and wanted to upload it to iTunes and put it on my iPod, but it would not load. I thought, "Oh, it must have a security thing." So I tried it in a C.D. player. It worked. I tried once more with the computer, and it failed. The driver shows up. But there is no C.D. I even tried another C.D. to see if it was just the one I had bought, but it wasn't. Any ideas?

A:My CD Driver doesn't want to work.

Hi lol_alex_lol30 and welcome to TSF

I can help you with some basics, but you will need to check further to get all the data you need, as I don't upload to iTunes.

I'm assuming you bought an audio CD. I'm also assuming that iTunes would like to see MP3 audio files....You will need to find that out. This though, is true. When you burn an audio CD from music files, those files are most likely in the form of WAV on your harddrive. They are burned onto the CD with a .cda extension and are named track 1, track 2, etc. The song names are not shown on the CD if you view it with Windows Explorer.

Extracting songs from an audio CD to harddrive is called ripping the song. Songs end up on your harddrive in the form of "songname.wav". songname will be Track1, Track2, etc. and you will have to rename each to have the actual song title associated with the song. WAV files are quite large and about 24 songs is the maxium that you can burn onto an audio CD.

Mpeg level 3 (MP3) is a compression specification that can be used to make much smaller audio files. A 20,000,000 (20 meg) WAV file will compress into a MP3 file that is about 2 meg or less. A file that is 10 to 11 times smaller than the WAV file. I'm sure you can appreciate the fact that small files upload much faster than very large ones. Also you can put about 240 mp3 files on a CD, but only about 24 wav files. You could also appreciate that your ear can't tell the difference between the sound of... Read more

4 more replies
Answer Match 59.22%

I?ve got some problem with my W-LAN device. Recently I?ve got a strange feeling about it because some things didn?t work correctly, so I decided to reinstall the driver. It didn?t work directly (I don?t know why), so I tried to uninstall it first, to install it again. Now I got this message:

This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

An update for the latest driver was useless because I already got the latest one. I tried both installing it from the device manager several times, which failed everytime with this message to come, and by the driver setup (there is a folder available on my computer with all drivers installed on it), which seemed not to have any effect, although it said "Installation complete". Has anyone a solution for me?
I?m going to reinstall my Windows soon, but it?ll take some weeks to that. But until that, I need my W-LAN to work again!
I?ve got Win 7 Home Premium 32bit, my W-LAN device is a Broadcom 802.11g, my notebook is a Lenovo G550.

Thanks for any help, Bennington

A:Reinstallation of W-LAN driver doesn't work

First go into Device Manager (right click on Computer and choose properties, then Device Manager), then go ahead and delete the Broadcom device under Network adapters. Then try and install only the most recent Lenovo supplied driver for your laptop model. Let us know how that goes...

6 more replies
Answer Match 59.22%

Dear Sir,
yesterday I installed windows 7 home premium x64
Before installing nvidia driver it runs well with windows default video performace (800x600).
But after installing nvidia driver, it doesn't work perfectly
MY problems after installing nvidia driver
1. It runs well before showing the start up window (welcome window where I have to entry my password)
2. But when I run the windows in safe mode it works perfectly
3. You can say that it is for driver problem / driver software problem. But I used the driver in the previous windows 7 home premium x64
If you need anything related with my problem, then comment in down

A:Doesn't work video driver

Hi rx123yz. Your issue sounds like that Windows have installed its own drivers over new ones that you installed. Remove all the old drivers and use Driver Sweeper. This little software removes all the bits of the old drivers. Below is the link to download the S/W. Before uninstalling the old drivers, download the latest drivers for your card from Sevenforums or from Nvidia site and install them after uninstalling and sweeping off the old drivers with driver sweeper.

Driver Sweeper Download

Keep us posted.

3 more replies
Answer Match 59.22%

Every time I start up the computer, my video card stops working. When I look in Device Manager, it shows the video card there, but with an exclamation mark by it which means it's in a 'problem state'. I can fix it by reinstalling the driver, but I have to do this every time I turn it on! How do I make it work every time?

A:Driver doesn't work on startup???

8 more replies
Answer Match 59.22%


In Windows 7, I am trying to figure out if I have any faulty drivers. I have been having BSODs for a while, and I've removed RAM etc. So the next step was to test drivers.

But I can't run Driver Verifier. No matter which drivers I select, the Driver Verifier causes a blue screen as the windows 7 logo starts to come together. I have to clear the settings in Safe mode to get it back.

Is there any way to fix this, or any other way to check my drivers?

(My most recent BSODs have said caused by dxgmms1.sys and tcpip.sys -- lots of IRQL_not_less_or_equal and system_thread_exception_not_handled.)

A:Driver Verifier Doesn't Work...

The purpose of Driver Verifier is to cause a Blue Screen of Death.
Analysis of the memory dump files will then (if it's worked) let the analyst know what driver caused it.

You'll know this because there will be a Driver Verifier Enabled memory dump.

FWIW - I had a system at work today that would spit out the IRQL error messages, but not the Driver Verifier Enabled error messages. I finally enabled all settings in Driver Verifier and then rebooted. An hour and a half later the system was still booting with the Windows 7 splash screen.

The point here is that the settings that you use in Driver Verifier are critical - and are determined by the type of BSOD events you are getting (for example, if you have BAD_POOL_CALLER errors, then you want to enable the POOL checking options in Driver Verifier).

Please zip up the contents of the C:\Windows\Minidump directory and upload/attach the .zip file to your next post.

19 more replies
Answer Match 58.38%

I'm running Windows 7 Ultimate (Build 7000) on an lenovo pc (Intel Pentium 4 - 2.8GHz, 2.00 GB RAM). my pc's actual graphics card is "Intel 82865G Graphics Controller" but windows 7 loads it as "standard VGA graphics card" which gives me a very very bad video quality but computer works great. HOWEVER,when i update video graphics back to my "Intel 82865G Graphics Controller" & play any video, the video quality is excellent & direct 3d & hardware acceleration starts working contrary to "standard VGA graphics card" but gives major computer operation problems. For e.g., As soon as i resize my VLC interface or run any other media players (like powerdvd or windows media players etc), the computer either gets stuck/hung or it shows a blue screen message saying "disable bios memory such as caching or shadowing" OR "page_fault_in_nonpaged_area" & lots of other explorer based problems.i tried changing various 3d settings in opengl as well, but in vain.





A:"Intel 82865G Graphics Controller" doesn't work ??

It is a driver issue. I suggest that you download the driver from HP website, remove the existed driver and install the new downloaded driver.
HP Compaq dc5000 Small Form Factor PC - Download drivers and software - HP Business Support Center

(note; if u found useful dont forget to ad me rep)

9 more replies
Answer Match 58.38%

Hello. I have Radeon HD 3850 AGP and Win7, and I tried to do almost everything ...
I installed 9.12 drivers, 9.12 drivers with adding CL_91526 from the topic above), 9.11 drivers, 9.11 drivers with Hotfix (ATI), 9.11 drivers with adding CL_91526, manual driver install by right click . Absolutely no changes and everytime the same ... During and after installing (before reboot) no changes in Device Manager, having "ATI Radeon 3850 " (or "ATI Radeon 3800 series" or something like that...) with yellow triangle and Microsoft Co. driver. And after reboot no changes with it, an error message with something like "Driver didn't install correctly, please install proper driver" ( though in ATI install log you can see that everything was installed succesfully). So after reboot I still see my VGA like "ATI Radeon 3800 series" with Microsoft driver and of course no changes in monitor resolution and all. If I try to delete microsoft driver (and device), and then install radeon drivers , during installation I absolutely just don't have any VGA in Device manager. And after reboot Win7 "finds" VGA and install from internet microsoft driver, so I can see "ATI Radeon HD 3850 (Microsoft Corporation WDDM 1.1)" in Device Manager.

I think that radeon drivers don't install (or don't install correctly), and Win7 ignores (or doesn't see) them.

Please help... Maybe I do something wrong ?...

(Asus P4S8X motherboard (latest bios), P4... Read more

A:Radeon HD 3850 AGP, driver doesn't work.

Welcome to seven forums AngieM: Unfortunately you have a pretty old system a socket 478 board I would suggest first off to use 32 git seven and try the method in this thread to try and get your driver to install. Not every systems hardware is up to running windows seven Install AGP Drivers for HD 3850, 3650, 2400 PRO This is the only method I know of that will install the agp driver, Are you sure you are following the directions EXACTLY the way they are written and installing form device manager? If so then it is possible your system may just be to outdated to run win 7 Sorry to tell you but?. Fabe I wanted to add you might want to uninstall the driver then use driver sweeper to make sure all remnants of the previous driver are removerd before trying again

9 more replies
Answer Match 58.38%

Hey guys,

Yesterday I formatted and reinstalled windows Vista on my new Dell Inspiron 1720 laptop. I've gone through the whole driver CD, installed everything there, but wireless still doesn't work! It doesn't find any networks. I realize that the drivers CD just has the default 1720 drivers, so some things might be different (for example, the default video card is 8400, but mine has an 8600, and the driver for that isn't on the CD). Perhaps I require a different wireless driver?

If that is the case, how do I know which one I have and where to get the propoer driver for it?

Any help is appreciated!

Thank you.

A:Solved: Wireless Doesn't Work! What driver do I need?

3 more replies
Answer Match 57.96%

Sorry if I am posting in the wrong forum, I'm not sure if this should be in graphics cards or drivers...or somewhere else entirely.

I have an Intel 845GL Chipset....I can't find a driver to make it work using Vista.

Do I have to buy a new graphic card? Or am I missing something easy, or is there a work around?

A:Work around? Intel doesn't supply a vista driver.

Ok, I am resolved to replacing my video card.

I've never replaced a video card before, but I've upgraded memory, installed a hard drive and a modem replacing a video card more complicated than that?

And, where should I start in determining what is compatible for my system/Vista etc?

9 more replies
Answer Match 57.96%

HP Deskjet 610CL driver doesn't work with Vista. HP Support in Bombay, India says "You should buy a new printer."
Printer still works great with windows 2000.

So should I remove Vista & install Windows 2000 on my PC or is the a driver somewhere that will fix the problem? Don't tell me to go to HP website. BTDT, it teels me that the driver is already installed on Vista. That's the one that doesn't work.

Anybody know ANYTHING about this problem?

A:Deskjet 610CL driver doesn't work with Vista

12 more replies
Answer Match 57.96%

Hi there!
I just got my new Asus Vivobook s400ca running Win8.1, a few weeks ago.
It really runs great, although I managed to find one problem. Since this is a laptop without a detachable screen,
I didn't really find any good reason for having the touch keyboard toolbar () in my task bar, since I was pretty sure I'd never need it. So I disabled the keyboard, which worked out fine but the toolbar was still there.

I then went on to try to remove it by using one of EightForum's .reg files for that purpose.

This did, as described, remove the toolbar, but apparantly it stopped the mouse pad driver as well, even though the mouse pad itself basically works. (no gestures or scrolling though.)

As you can see here, There's no driver running.

And in the ASUS hub, it's also impossible to turn it on. It just keeps saying it's off.

So I decided to use another .reg file that I found with the initial one, that should basically just rollback the effect that the other one had, but to no avail.

It just made the toolbar come back.
So I don't really know where to go from here. Any suggestions?
Also, if there is anyone who knows what to do about that toolbar, please do tell! [:

Thanks in advance! [:

More replies
Answer Match 57.96%

Yesterday I reinstalled Windows 7 on my notebook PC. I had to use a Microsoft installation disk because unfortunately, serious errors resulted after I installed from the HP recovery program. Consequently the HP drivers that were installed automatically with the recovery program weren't installed on my system. I had to install several of them from the HP support site. I got everything to work except for the Touch volume control, or the Volume Scroll Zone as referred to by HP in the service guide. This is the device located just above the keyboard that increases or decreases speaker volume when you drag you finger on it. I installed the Quick Launch button driver but that only applied to the mouse and pointer touchpad. I looked at the devices listed in my startup configuration. I saw the synaptics pointing device and the HP quick launch buttons listed. So is the IDT PC audio driver.  What am I missing? Where I can I find it to activate the touch volume control?

A:Touch volume control doesn't work on dv6, looking for driver

@accordeoniste Try these. REO

2 more replies
Answer Match 57.96%

The Stylus Pro 7600 is now a really old printer, the last supported driver was for XP but it worked in Windows 7 and I believe to some extent in 8 although I never did try it.

It s a really good reliable large format printer though and very affordable in parts, ink and the second-hand purchase price.

However alas Windows 10 doesn't like it, I did the upgrade to 10 (and then the downgrade) from windows 7 but it will not see the driver it sees the device but calls it a USB high speed device or something like that and compatibility mode didn't seem to help.

So unless there is a clever work around and I'd love that to happen I'm stuck on Windows 7 for the duration.

Suggestions welcome.

A:Epson Stylus pro 7600 - Driver doesn't work

No cleverness here, and I don't have such a printer, but...

Have you tried the drivers for Vista?

Epson Stylus Pro 7600 - Photographic Dye Ink, Drivers & Downloads - Technical Support - Epson America, Inc.

These are for the dye-based version. I didn't look to see whether the Ultrachrome based one uses different drivers.

(There are also 32 bit Windows.) If they don't want to install, you could try right clicking on the installer and running the Troubleshoot Compatibility tool.

Good luck.

3 more replies
Answer Match 57.96%

My boss bought a new HP tower after our old one ran out of space. I plugged it in and everything worked until I realised the scanner didn't work. I downloaded a driver but it still didnt activate the scanner. So I looked at the driver repair discs that came with the tower. I installed that thinking it would repair the scanner driver and when I logged back in, the keyboard or mouse USB didnt work. I hope I didn't screw up anything. The keyboard works in BIOS. My boss doesn't know and I would like to get this repaired without bringing anyone in. HELP! Im on Windows 7.

More replies
Answer Match 57.12%


I installed a new HDD on my Satellite A210-106. Usually it runs on Vista but I had Win XP Professional installed.
Everything woks but the sound/speakers. The driver ist not installed correct.

There unsed to be realtek driver on the old HDD but I can?t get hold of the driver working on XP on the toshiba download list or via realtek.

I would appreciate any suggestions to get the system running again.

A:Satellite A210-106 - Sound Driver doesn´t work running Win XP

Which service pack version contains your installed WXP?

4 more replies
Answer Match 57.12%

Ok, so I've re-installed Windows XP (SP2) and after it booted up, I noticed that my onboard ethernet adapter wasn't recognised. So I went and downloaded the appropriate drivers ( from the mobo's official site (it's a PCChips M848A mobo) but when I try to install the drivers, it still says that the hardware isn't functional (Code 1).

I've tried many different versions of SiS900 drivers but it simply won't work.

When I tried the setup.exe file that came with the official driver, the install would say "Update Driver for PnP Device Fail. Setup will exit".

That's when I simply forwarded the windows hardware installer to an XP folder i found in the zip file. But still, it doesn't work.

I really need help on this matter. Thanks in advance...

EDIT: Maybe it's worth mentioning that I re-installed WinXP over an existing windows partition without formatting it. I simply deleted the former windows installation files.

A:[SOLVED] On-board Ethernet Adapter Driver Doesn't Work

Have you tried directing the driver to install from SiS900\WinXP\netoem.inf ?

Go into your device manager, right click the device under network adapters and click update driver. From there direct it to the aforementioned file.

6 more replies
Answer Match 57.12%

I'm trying to add a Canon imageCLASS MF7470 printer to my laptop. When I plug it into the USB, Windows 7 detects it, but as unspecified. It says no driver is installed. When I do a Windows update it comes up with other imageCLASS models but not the one I have. I've tried going thru these threads to locate my options but nothing works. When I go to add printer, properties is as far as I can go cause the only tabs I get there are general and hardware. This is a work printer for a jobsite, so of course the disk has been lost at some point, but I need this running ASAP.

A:Add a Canon printer with no driver and Windows update doesn't work

Here is the driver page for Canon, just specify your OS, download drivers, install and go at it could be that MS just doesn't provide them. However Canon does for both 32 and 64 bit.

Canon imageCLASS MF7470

1 more replies
Answer Match 57.12%

Pasting in contextual information from another post. ~ OBconflicker.Bi!nf worm keeps reappearing, windows defender monitor stops working, slow computer, windows search protocol windows pop up, Malware, virusPop up windows keep appearing "Windows search protocol host stopped working and was closed" Itunes occassionally doesn't work, Media Sync doesn't work. Hard Drive keeps working in the background. Windows Defender no longer monitors the running programs.End of added information. ~ OBLogfile of Trend Micro HijackThis v2.0.2Scan saved at 8:46:00 AM, on 1/11/2010Platform: Windows Vista SP1 (WinNT 6.00.1905)MSIE: Internet Explorer v7.00 (7.00.6001.18349)Boot mode: NormalRunning processes:C:\Windows\system32\taskeng.exeC:\Windows\system32\Dwm.exeC:\Windows\Explorer.EXEC:\Program Files\Windows Defender\MSASCui.exeC:\Program Files\Digital Media Reader\readericon45G.exeC:\Program Files\Java\jre6\bin\jusched.exeC:\Program Files\Intel\IntelDH\CCU\CCU_TrayIcon.exeC:\Program Files\Common Files\Intel\IntelDH\NMS\Support\IntelHCTAgent.exeC:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exeC:\Windows\WindowsMobile\wmdc.exeC:\Windows\System32\hkcmd.exeC:\Windows\System32\igfxpers.exeC:\Windows\sttray.exeC:\Program Files\... Read more

A:microsoft windows search protocol host stopped, slow, firefox doesn't work, itunes doesn't work

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Answer Match 56.7%

Hi, I had some issues with a HDD around this time last year, so I replaced it with a new western digital HDD. I wasn't able to back anything up, so I cloned it instead.

turns out I installed the incorrect driver for my video card and suffered from the BSOD syndrome....

well, I finally got that sorted out, ( I think ) and now I am trying relentlessly to get catalyst pro control center to work properly. Ive read numerous places online that involves editing the Assembly folder, but I have no such keys in there.

when I try and run CCC, it tells me that I am unable to run as I wouldn't be able to change any settings within the app basically. Ive tried uninstalling, installing. trying ATI opposed to AMD- to no anvil.

I know for a fact that I had CCC on this pc, but it almost seems impossible to get up and running, I am very desperate to get this up and running.

thanx in advance

A:Catalyst Control Center doesn't work after I installed the wrong driver

Hhhmmmm... let's take a look

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop
Attach it to your next post by clicking the Upload a File button


3 more replies
Answer Match 56.7%

I have this motherboard:
915GVM6-F/ L

I need graphic driver for Windows 7 (WDDM) with Aero support. I installed driver for XP, but it doesn't support Aero. Please help

Intel 915GM/GMS,910GML

A:Intel 915GM/GMS,910GML Windows 7 driver and aero doesn't work

The specified chipset doesn't support Windows Aero unfortunately.

3 more replies
Answer Match 55.86%

Help my windows 7 laptop just keeps rebooting and i cant get to safe mode or recovery what should i do ?

A:system recovery doesn't work and safe mode doesn't work and just keeps reboting

System manufacturer and model?

0 more replies
Answer Match 55.86%

hi, I know there are many in the forum who have the same problem as mine. 
my computer was running fine last friday. I tried to start it on saturday, it says it can't startup and need to repair startup. I did run the repair but still can't startup. I tried to use system restore to earlier dates, it still can't startup. The computer has trojan virus before and I tried the anti-malware from internet to kill them. seems that it create more problem for my PC. I have some important files in the computer that I wish I have archived. 
wonder if any one can help. thx in advance.

A:can't start up computer-window7, repair doesn't work, restore doesn't work

I'll report this topic to appropriate helpers.
Hold on there...

6 more replies
Answer Match 55.86%

I downloaded Win7 x86 drivers for our Ricoh Aficio MP 171 from Ricoh, to load them onto a machine freshly updated from XP to Win 7. Every time i try to install them, Windows tells me the default driver it chose is the best one and won't install it. The driver it is using does squat, the printer was working fine when it was connected to XP, now the most we have gotten out of it is a few pages of jibberish when we tried to print a photo.

I have tried manually installing the driver from the device manager, i tell it to use a folder on the desktop where i copied the driver, but when i press next it immediately says the driver being used is up to date. I tried telling it to read from a dvd i burned the driver folder on to, it doesn't like that either.

I am toying with the idea of deleting the default driver from system32 (but copying it first to a data key), disconnecting from the 'net, and then installing the one from Ricoh.

A:Default printer driver doesn't work, Win7 won't update it. Ricoh mp171

Hi briligg, Have you tried installing the drivers in admin mode Run as Administrator Some times you have to overrule win7 and tell it you know best this time

4 more replies
Answer Match 55.86%

Got a new tablet pc. Put in a new hard drive and installed vista ultimate x64. Works great. I was suprised how much smoother it runs.

The 11a/b/g/n wireless LAN Mini-PCI Express Adapter isn't recognized by vista. My friend said it might be a problem because it doesn't work with 64 bit software. Went through the long process of installing vista 32 bit version. Same thing. It was recognized by vista.

So now here I am with 64 bit vista installed again. I downloaded a couple drivers that it could be from lenovo website. It still didn't work.

Before I started this whole project I went to the microsoft upgrade site to check compatability. While running XP, the site said that I would have to download the wireless lan driver and install it after i installed vista. It also said the fingerprint reader would need to be manually installed but I don't care about that.

Any suggestions?

A:IBM Lenovo X60t Tablet Pc wireless card driver doesn't work after x64 Vista

Hi davIbus

Have a look here;
Lenovo Support & downloads - Wireless LAN ThinkPad 11abg, abgn, bg, bgn for Windows Vista 32-bit and 64-bit- ThinkPad

Download using the file link

I hope this helps


3 more replies
Answer Match 53.76%

I am trying to use my CD-ROM drive and it doesn't work here are the list of things I have tried

Uninstalled and reinstalled the cd-rom driver it is a Matbleepa UJ-840D CD-ROM/DVD/CD-RW in my HP laptop (Didn't work)

Read stuff about code 39 and removed in the registry edit screen Upperfilters, Upperfilters.bak, Lowerfilters, Lowerfilters.bak and rebooted (Didn't work)

Removed itunes from computer (didn't solve the issue with cd-rom player)

Went back to a system restore point that was before the last time I used the CD-rom player and it worked and that (didn't work as well)

Read a lot of different posts about code 39 and nothing is given after the above steps are taken if it still won't work except to reformat which I would prefer not to do.

Any help would be greatly appreciated.

A:CD-ROM doesn't work, code 39 error, tried many things still doesn't work

1. Uninstall the drive through Device Manager.Restart computer. The drive will be automatically reinstalled.or...2. Delete Upper & Lower Filters computer.or...3. Download, and run Restore Missing CD Drive patchDouble click on to unzip it.Right click on cdgone.reg, click Merge.Accept registry merge.Restart computer.or...4. Go to Device Manager, click a "+" sign next to IDE ATA/ATAPI Controllers.You'll see two items:- ATA Channel0 (or Primary Channel)- ATA Channel1 (or Secondary Channel)Right click on each of them, and click Uninstall. Confirm.Restart Windows. They'll be automatically reinstalled.

6 more replies
Answer Match 53.34%


I just recently switch my hard drive ( 320gb HDD 5400 rpm ) to a Samsung 840 EVO 250 Gb.
I'm currently missing some files and I can't seem to find those drivers help?
Btw it's a laptop here the model if you wanted to know : Asus X401A

Network Controller

PCI Device

SM Bus Controller

A:Missing some driver: SM Bus Controller, PCI Device, Network Controller

I also forgot to mention a fresh install of Windows 7.

2 more replies
Answer Match 52.08%

Hello I need network controller and 3D video controller driverNetwork controller:PCI\VEN_10EC&DEV_B723&SUBSYS_2231103C&REV_003D VIDEO CONTROLLER:PCI\VEN_10DE&DEV_1140&SUBSYS_2337103C&REV_A1

View Solution.

A:I need network controller and 3D video controller driver

Hi: You need these drivers... Network controller This package contains the driver installation package for the Realtek RTL8188EE wireless LAN Controller in the supported notebook models running a supported operating system. File name: sp69033.exe 3D VIDEO CONTROLLER: This package contains the driver that enables the NVIDIA Graphicsin supported notebook models that are running a supported operatingsystem. File name: sp67265.exe

4 more replies
Answer Match 52.08%

Bought New HP 15-be005TU  NoteBook. :=) Installed Windows 7 Ultimate (64-Bit).Unable to Connect to the network. No Wifi, No Lan.After few tries understood Network Controller, USB Controller and BCM43142A0 finding "No Drivers"Please Help. Rao DS

A:Network Controller, USB Controller, BCM43142A0 No Driver Fou...

Hi: You need these drivers... Wifi: The package contains the Broadcom wireless LAN drivers and utility that are required to enable the integrated Broadcom Wireless LAN Adapter in supported notebooks that are running a supported operating system. Bluetooth: This package contains the Broadcom Bluetooth driver and software for supported models that are running a supported operating system. Broadcom Bluetooth 4.0 Driver is required to enable Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions. Ethernet: This package provides the driver for the Realtek Ethernet Controller in the supported notebook models running a supported operating system. USB: This package contains the Intel USB 3.0 eXtensible Host Controller Driver for supported notebook models running a supported operating system.

1 more replies
Answer Match 52.08%

Hello guys, I've been having a lot of issues with my AMD drivers, specially when it comes to chipset and video drivers. I recently had to downgrade my video drivers to June 2015 release date, that was the only solution found so I could run games properly (with recent drivers, games that should run with 100fps+ were running with 15fps)..

But that is not the point of this thread, instead, I'm here because after a few weeks running this drivers, I noticed my WiFi was not connecting to my router (wich is working, I can get access with other computers/cel phones). In my drivers list, the Ethernet controller and SM Bus controller are flagged as not installed.
I've tried to find these drivers, but AMD seems to only release packages of drivers. I've come to this download page:

where I should be getting the drivers that solve my problem, but the big issue is: apparently, by doing it, i will be reinstalling the latest video drivers (for the APU), and that is ABSOLUTELY NOT what i want.

Does anyone know how to solve this problem? And I mean: where can I get the sm bus and ethernet controller driver w/o having to install a bunch of unnecessary drivers?

My notebook is a MSI 60X 3BE
video card: Radeon HD 8970M
chipset: AMD A10-5750M (with Radeon HD 8650G)
motherboard: MSI MS-16FK

Thanks in advance.

Edit: I've downloaded the drivers in the link, installed and SM Bus is running properly, but Ethernet doesn't. Any further help?

More replies
Answer Match 52.08%

Hey!Just got a fresh install of windows 7 on my DV6-6041tx and was just wondering which drivers would work best for - SM Bus Controller PCI\VEN_8086&DEV_1C22&SUBSYS_3581103C&REV_04PCI\VEN_8086&DEV_1C22&SUBSYS_3581103CPCI\VEN_8086&DEV_1C22&CC_0C0500PCI\VEN_8086&DEV_1C22&CC_0C05  Ethernet ControllerPCI\VEN_10EC&DEV_8168&SUBSYS_3581103C&REV_06PCI\VEN_10EC&DEV_8168&SUBSYS_3581103CPCI\VEN_10EC&DEV_8168&CC_020000PCI\VEN_10EC&DEV_8168&CC_0200 Thanks In Advance!!

View Solution.

A:Dv6-6041tx - SM Bus Controller Driver & Ethernet Controller ...


3 more replies
Answer Match 52.08%

I have a problem. I have adjourned the bios of the pc acer aspire M1641 and when I have restarted the pc tuneup utilities it signals me this problem:

the peripheral "Nvidia port io control driver" doesn't correctly work

Do you know as solution for this?

A:"Nvidia port io control driver" doesn't correctly work

Did you find a solution to this problem? TuneUp Utilities report on an identical problem on my win7 system

9 more replies
Answer Match 51.66%

This is the message I get everytime I run the auto detect driver util.
Driver detection not available Please try again later or use the Find it Myself tab to find drivers by Service Tag or see a list of drivers available for your product.
The laptop I use is 'XPS 15 9550'

A:Dell auto driver detect detect doesn't work any more?

I may be able to help.  I will be sending you a friend request so that I may get your information. 
Please accept the request. 


5 more replies
Answer Match 50.82%

.I reprogrammed my laptop Samsung with the model code NP-N102S-B02NG. so when I'm connecting my laptop to the wi-fi i cannot connect because it has no driver for Ethernet and Network Controller driver. so I waana ask how can I have those driver?
I need your help so that I can already use my laptop. thankyou

More replies
Answer Match 49.56%

I have an ASUS notebook running windows 7 64-bit. I am using the QuietOffice power profile, however the screensaver won't kick in no matter what I do, and the display does not turn off even though I set it to be after 5-minutes of inactivity. I don't know if there is something running in the background... I have turned off my usb wireless mouse, and nothing....

Any ideas?


A:HELP: power option doesn't work - screen saver doesn't start!

This is another case of factory bloatware interfering - in this case a useless factory utility overriding Win7's superior built-in version.

Googling the Quiet Office feature of Asus there are multiple reported problems. Best to default to the Win7 built-in Power Options in Control Panel. Set up a Balanced Plan unless you're a gamer then use High Performance.

Here are other tips for cleaning up factory bloatware

5 more replies
Answer Match 49.56%

I have no idea what my sister and her friends were doing on the comp for a couple of days that i decided not to use it, but now:

- a few programs take forever to load or don't load at all, but they do show up under the processes tab in the task manager
- after pressing Ctrl Alt Del, the task manager icon appears in the system tray, but the thing only shows up a minute later
- my system recovery is "not able to protect my computer," and restarting does nothing
- actually, when restarting or shutting down Windows, it stops at where it only shows my desktop background and cursor [which is still able to move] and nothing else after that, so i have to hold the power button and force it to shut off
- when I right click the desktop and click on "Properties..." [or something similar to this action] it doesn't show up at all, and whenever I try to open any application after that, they don't even load at all either
- and probably other stuff that I haven't took note of yet...

Things i've tried to get rid of these problems:
- Virus scan with avast!, a couple viruses found and fixed, but nothing changed.
- disk clean up, nothing changed
- registry clean, nothing changed
- CURRENTLY defragging my C drive, hope something changes..

Anyone know what the heck's going on!?
Anyone got any suggestions on what to do next?
Anything helps and would be greatly appreciated!

A:programs not loading right, computer doesn't shut down right, sys recov doesn't work

no replies yet? :(

anyway, just stopped by to say that when shutting down, it takes forever to get to the "Saving your settings..." screen, and that's where I decided that it stops and nothing else after that.
Defragged my C drive, still no results besides the computer feeling a bit smoother-running o_o

1 more replies
Answer Match 49.56%

I have a 4y old Sony VAIO (VGN-NS11J) that stopped working today morning after making a whirring noise

Repeated attempts to restart failed and after many attempts, I managed to get to the Startup Repair mode - after a long time, startup repair says it failed to automatically repair the problem

I managed to run system restore but after a while I got the following message: "System restore failed due to an unspecified error. The disk strucgture is corrupted and unreadable (0X80070571)

My laptop did not come with a Windows Vista CD/Recovery disk

My first priority is to recover a few files in the laptop - if I am able to do this, then I dont mind junking the laptop

Since this is an old laptop, I would prefer not to use an expensive professional to recover the data

Any help/suggestions would be much appreciated!


A:Sony VAIO running Vista doesn't start-up, system restore doesn't work

You may be able to retrieve your data by using Ubuntu. Post #3 in this topic provides instructions.

1 more replies
Answer Match 49.14%

So the story goes like this I like updating drivers and i thought i found a new chipset. I was wrong I was uninstalling devices i didn't have. i restarted my computer and i couldn't get on the web network controller missing and unknown device which is under adapters. i have a m2n-e sli mobo with amd 6400+ athlon cpu windows 7 x64.

A:network controller driver accidently removed can't find driver

Get your original motherboard driver disk and run it to detect and install devices that are on your motherboard
Let it "autorun"

9 more replies
Answer Match 49.14%

Intel(r) 82815 processor to AGP controller - 1131

It doesn't work, I can't play any games, since the driver of this device its messed up, here's what the details say when I click properties:
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Click Troubleshoot to start the troubleshooter for this device.

Now i can't find the driver to download it and I click on update driver, but it doesn't work.
Any help will be trully appreciated. Thanks in advance

A:Solved: graphic controller driver messed up, help cant find driver

16 more replies
Answer Match 49.14%

For the last month or so, every time I log off my account, the keyboard does not register at the Windows Log In screen. This makes it so I have to restart the computer and then it works fine.
There are three accounts on the computer, the casing has been half removed for the last 3 months, a DVD burner and driver recently installed 3 months ago and I am using a wireless off brand USB keyboard and mouse.
OS: Windows Xp Home Edition 5.1.2600 Service Pack 3
As for the second part, the computer requires several restarts to boot up, sometimes up to twenty minutes of turning on and off to boot up. Only started doing this a week ago.

A:My Keyboard doesn't work, and the computer turns on but doesn't start.

It sounds like something is wrong with your Windows XP drivers. Something like that happened to me while building my computer, and when I boot up the keyboard did not work because my copy of windows XP was bad. You could try reinstalling windows XP, and It might work better, but I dont have a definite answer to your problem.

3 more replies
Answer Match 48.72%

I am quite new here, but I've been wanting to get this problem solved for a long time, and I haven't seemed to get any answer.

So here's my problem:

I bought my Asus N53SV for around a year ago, and it worked great. But for some reason something changed.
When I try to open bluetooth, nothing happens. And when I want to connect anything using bluetooth, it doesn't work.

I tried to do this:
[windows] + r >bttray
But nothing opens up.

Please help!

Thank you,

A:My bluetooth doesn't work. bttray doesn't open.

Quote: Originally Posted by Karstin1812

I am quite new here, but I've been wanting to get this problem solved for a long time, and I haven't seemed to get any answer.

So here's my problem:

I bought my Asus N53SV for around a year ago, and it worked great. But for some reason something changed.
When I try to open bluetooth, nothing happens. And when I want to connect anything using bluetooth, it doesn't work.

I tried to do this:
[windows] + r >bttray
But nothing opens up.

Please help!

Thank you,

Hi Karstin,

Welcome to Seven Forums.

You would need to re-install Bluetooth software/driver for your system. Please check the link below for finding out the drivers:

ASUSTeK Computer Inc. -Support- Drivers and Download

If you have any further queries, please feel free to contact us.

7 more replies
Answer Match 48.72%

Have a friend with a relatively new Lenovo laptop using Windows XP SP3. Overnight he can't access the Internet via browsers, email or AIM. His desktop connected to the same router is working fine.

He can access the router by IP address using either IE7 or FireFox 3.5. Anything that needs a DNS server doesn't work. This does say though that he has a working connection to the router.

He's run MalWareBytes and his own McAffee software looking for bad stuff but has found nothing.

Running "ipconfig /all" from the command prompt gives exactly the same results for the laptop as his working desktop. The DNS servers are there. He can ping the DNS servers using their IP addresses. He is being assigned a proper local network address so DHCP is working on the router.

Any thoughts on where to look next to discover why the Internet applications don't seem to be able to find the DNS servers?

A:Can't Access Websites, Email doesn't work and no AIM doesn

FWIW, my friend took his laptop to a PC shop. Their diagnosis was malware. I don't know the identity of the malware. Anyway, the shop saved his data then formatted and reloaded XP SP3.

1 more replies
Answer Match 48.72%

Cant get it to updateand when i use thr troubleshooternit doesnt work either
Farbar Service Scanner Version: 21-07-2014
Ran by Administrator (administrator) on 03-01-2015 at 16:34:05
Running from "D:\Users\Administrator\Downloads"
Microsoft Windows 7 Ultimate  Service Pack 1 (X86)
Boot Mode: Normal
Internet Services:
Connection Status:
Localhost is accessible.
LAN connected.
Google IP is accessible. is accessible. is accessible.
Windows Firewall:
mpsdrv Service is not running. Checking service configuration:
The start type of mpsdrv service is OK.
The ImagePath of mpsdrv service is OK.
MpsSvc Service is not running. Checking service configuration:
The start type of MpsSvc service is set to Disabled. The default start type is Auto.
The ImagePath of MpsSvc service is OK.
The ServiceDll of MpsSvc service is OK.
Firewall Disabled Policy:
System Restore:
SDRSVC Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open SDRSVC registry key. The service key does not exist.
System Restore Disabled Policy:
Action Center:
=====... Read more

A:Windows 7 doesn't update and troubleshooter doesn't work

Please follow the instructions Here to run the System Update Readiness Tool. When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:C:\Windows\Logs\CBS\CheckSUR.logC:\Windows\Logs\CBS\CheckSUR.persist.log

1 more replies
Answer Match 47.88%

A few days ago I did a clean install of Windows 7. Now I have a problem. The computer is a wireless 'client'. It has a Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC (NDIS 6.20).

When I bring up Device Manager and expand 'Network adapters' I see "Realtek PCIe GBE Family Controller".

When I expand 'Other devices' I see "! Network Controller" (Note the exclamation point.) Double click on that and I see "The driver for this device is not installed. (Code 28). When I click on Update driver I get a message Can't find a driver. I have tried many times with different source folders and files and nowhere is a driver found.

I have gone to MSIs driver web page and downloaded the Realtek PCI-E Ethernet Driver for Windows 7 32/64 bit "", extracted the files and still no joy. (M/B is MSI G41M with Intel E7400)

There is a wireless icon in the tray. I click 'Open network and sharing center". No matter what I choose Win7 ends up telling me to plug in an Ethernet cable. No, this is a client not the server. I have verified that the NIC can connect to the computer with the Ethernet cable by using the old XP hard disk.

Any suggestions?

A:Network Controller Driver–not Adapter Driver

Disable the onboard lan in the bios if you aren't using a wire to ever connect.

2 more replies
Answer Match 47.88%

i cannot find any drivers for bluetooth controller and pci device

A:bluetooth controller driver and pci device driver for hp 15 ...

 Hi, PCI: Bluetooth If they do not work, attach the Hardware IDs, check: How to easily find drivers for Unknown Devices in Windows

1 more replies
Answer Match 47.88%

Feel free to delete. I cannot delete this myself.

More replies
Answer Match 47.88%

Hi... xp stopped responding and I decided to power off.

Was never able to restart after that. Normal boot shows the windows initial screen, but eventually just restarts, safe mode does the same thing whether it's with network, command line or plain safe mode. Last known good configuration does the same.

Needed to use a file so decided to remove the HD and re-install to another PC. I did have access to the file in question but now I'd like to fix the problem.

The other system uses AVG. I started a scan and it detected Cekar.d (A0003977.exe, wdfmgr.exe and initially ntldr.exe), Dropper.Inor (ntdetect.hta, A0003979.hta), PSW.Generic5.ABVW (ctfmona.exe), PSW.OnlineGames.AAFI (ctfmonb.exe), PSW.Generic5.AFYK (ctfmond.exe), PSW.OnlineGames.ZWT (LotusHlp.exe) and some others but for whatever reason the scan stopped. I restarted it and now the AV still finds most of the threats it was seeing before but not Cekar.d. in the ntldr.exe file.

The system that had the problem was running Win XP Home SP1. Unfortunately, I can't find the manufacturer's recovery CD.

HD is still in the other PC. How should I attack the problem?

A:XP doesn't reboot, safemode doesn't work

Update... Three passes of AVG and all threats were put in vault. Tried to re-install the HD to the initial system but no change... System says it didn't start correctly, that a new software of hardware could be responsible, the suggests to try las known good config, none of the options work, they all perform some tasks then windows reboots and ends up in the same screen.

2 more replies
Answer Match 47.46%

Acer aspire's Bluetooth doesn't work since I bought it I've installed drivers too but it doesn't work what should I do.
In its specs it has Bluetooth . But there is no Bluetooth device found in device manager how to repair this.
Please HELP!!

A:acer aspire 4738' s bluetooth doesn't work but wifi work?

Hi ... Welcome to Seven Forums ... What is the Model Number of your Laptop ? ...

Did you buy the Laptop from new ? ...
Did you mean Windows 7 x86 ?...
If your System Specs are correct you have 4 GB of ram ? ...
If that is the case your Windows should be 64 Bit ...

9 more replies
Answer Match 47.46%

I have the specified problem at
My power options and my screensaver DO NOT work after installing a wireless pointing device but I DO NOT HAVE Cyberlink nor ANY of the startup items indicated in the article!!!!!!! but they STILL DO NOT work!!!!!!!!!!!!!!!!!!!!!!!!!!

A:Screensaver and power options DO NOT work and Microsoft KB article DOESN'T WORK

Manufacturer and model of the device installed?
If you remove the problems disappear?

1 more replies
Answer Match 47.46%

My problem is that I cannot access the internet through my LAC. I enable the connection and it will connect and send packets, but will not receive any packets. I have no problems enabling my wireless connection and connecting to the internet. The wireless does like to disconnect and reconnect about 3 or 4 times an hour which is another problem I have. I believe this LAC problem started around the same time I was trying to get shared music between my computers on iTunes. I was trying to allow for connection on port 3689, but everything I did was unsuccessful. Any suggestions for any of these problems I'm having?

A:Solved: Local Area Connection: doesn't work, Wireless: does work

16 more replies
Answer Match 47.46%

I cannot get Windows Media Encoder 9 to work at all at home, but I have no problems with it at work, so I know I'm not trying to do something with it that it can't handle.

At home, every time I try to convert either an AVI or a VOB to WMV, either using the wizard or the custom settings, it lets me get through it all and then, when it starts trying to encode, it throws up the message:
"Windows Media Encoder has encountered a problem and needs to close. We are sorry for the inconvenience. ..."

It never gives me any more information than this, just crashes and closes. I've tried repairing it through the control panel, as well as completely uninstalling it and reinstalling it, but it hasn't helped.

At home I'm running Windows XP Media Center. At work, where I've never had it crash, I'm running Windows XP Professional. Is there something in Media Center that causes it to crash? Is there any patch I can download or thing I can do to get it to work on my home computer?

Thanks for your help.

A:Windows Media Encoder doesn't work at home, does at work

I'm currently having the same problem . I open the .vob file set the output folder , settings etc etc . just as it was about to start converting , WME just stops and crashes . I use windows xp home edition so if your company's xp professional can make it work im thinking it is something in the professional edition which allows it to work not something in our edition that doesnt allow it to work. Are there any alternatives for encoding a video? i dont have much cash right now so i was hoping i might find some freeware alternatives . thanks

2 more replies
Answer Match 47.46%

After I install LIBusb I could work futher. But after I put him off en reboot an hour later my wired mouse en keyboard didn't work anymore.
When I restart in safe mode both still doesnt work.

OS: W7 Home Premium 64b
Computer: HP Pavilion p6250

Please Help!!

A:LIBusb, USB ports doesn't work. Safe mode also no work

did you get sorted i have same problem


2 more replies
Answer Match 47.46%

I'm having difficulty figuring out this persistent malware. I think it's likely that there are multiple issues.

I'm running Windows Vista.

The malware started off with "google redirect" symptoms, and disabling my Symantec software

Shortly following, I could no longer access the web. However, the malware itself would create an internet explorer popup every 5-10 minutes (not my default browser) that would go to "search sites" (none that I recognized....) and search for lewd topics. Running the taskmanager would show multiple instances of iexplore.exe running on my machine (one for each popup). The popups would have to be eliminated one by one using the task manager.

Trying to run a system restore, I discovered all restore points had been deleted.

I installed AVG antivirus and got it to run once which seemed to help the problem. However, upon restart, all issues were back and I could no longer run avg. Windows defender constantly pops up that a new trojan is attacking my machine.

At this point, I unplugged my internet connection and started using another machine. I had left my problematic computer alone for about a month.

Upon turning it on last night, each time I logged on, it gave me a warning that "Windows had encountered a critical error and will restart in one minute" and would restart. I tried running cmd (in that one minute) to intercept it, but the task manager would freeze if I tried to run it from there and explorer wo... Read more

More replies
Answer Match 47.04%


So whenever a program uses InstallShield to install or uninstall a program, it boots up, and the bar fills up preparing to run the Wizard, and right when it fills, an error message pops up: "An error occurred while launching the setup. The specified module could not be found," and then it quits.

This occurs anytime I try to install or uninstall anything that uses InstallShield. I've tried everything at the InstallShield troubleshooting site, including deleting a file in the registry (the problem key was there but deleting it didn't solve the problem), making sure I had admin privilidges, and emptying out the Temp folder. I can't reinstall InstallShield because it (ironically) requires InstallShield to install.

The one problem that I can think of would be that I just got back from college. At college, I logged onto a network to use the computer. Could this have something to do with it? I've tried logging onto the computer itself as the Admin, but the problem still occurs. This whole thing really sucks because the comp is pretty much useless not being able to install or uninstall anything.

Thanks for any help.

A:InstallShield doesn't work, none of the usual fixes work

Depending on what version of InstallShield you have here is a site that shows some of it's program errors >

Have you tried this site >

InstallShield uses the Windows Installer Service. It could be that Windows Installer Service has somehow become corrupted.
Check this site out >

As a last resort you might consider reinstalling your Windows Operating System on top of itself to repair and replace the corrupted or missing files associated with InstallShield and Windows Installer Service.

Just for your information, InstallShield is the oldest installer program company. However there is another that is completely free “Inno Setup” which you may have seen when installing some programs. Here’s their site >

1 more replies
Answer Match 47.04%

Dear All
I'm using Dell Vostro 3350 now. After I upgrade Win 10 Pro, the Laptop Speaker doesn't work and can't give output any sound. But if I put my earphone, all of the sound include song work.
I use PC Doctor and scan the computer hardware but there is nothing found error on hardware and software. I also use windows update to scan all of the drivers, but it can't found any update drivers of this laptop. So what can I do next to fix the problem?
Thank you for member's attention

A:Laptop Speaker Doesn't Work But Using Earphone Work

Hello. Dell does not recommend installing Win10 on the Vostro 3350 model. Dell says, "If you choose to upgrade, some features, applications, and connected devices may not work as expected." To get the best performance from your laptop, revert it back to the previous operating system. You can google to find instructions for undoing Win10.
If you want to continue with Win10, then try to install the IDT Win8 audio driver using compatibility mode.
1. Click the link to go to the driver's page. Download and save the driver to your desktop or any convenient location on the hard drive. 2. Double click on the new folder to extract (unzip) the driver files.3. The extractor wizard will create a new folder for the driver files. It will be at "c:\dell\drivers\xxxxxx". Write down the exact location that the wizard creates. 4. If the driver begins to install automatically, halt (cancel) the installation.5. Browse to the driver files on the hard drive (the location you wrote down).6. Find the "setup.exe" file.7. Right click on setup.exe to open the context menu.8. Select the Properties.9. Select the Compatibility tab.10. Check the box "run this program in compatibility mode for"... Win8.

1 more replies
Answer Match 47.04%

Help! See the title.

I'm going mad because I can't listen to music! I've tried three different mediaplayers (Windows Media Player, VLC & QuickTime) and all three just don't work! WMP won't even play the files, VLC will (in .avi-case even with picture!) but there won't be sound :/. Same for QuickTime,...

Now, the weird thing is that I can play games without a problem and the sound's still there! Hell, even sounds made by Windows -- I hear 'em! YouTube works too!

I'm concerned there might be something wrong in the registry,... (I use Eusing Free Registry Cleaner/Defrag regularly, I guess something was bound to go wrong,...)

Please, help? :(

(Windows 7, btw.)

A:Sound DOESN'T work while playing .mp3/.avi - DOES work with games/YT

Apparently I made a mistake,... Sound in games doesn't work* System sounds and YouTube do, though.

3 more replies
Answer Match 47.04%

Could someone please help? I'm running a dual core (I know, glitchy) with 1gb ddr2ram and a 256mb GEforce7300le 3dcard. My question is...I was WinRar'n a directory on my 250gb External HDD and then something glitched major and it took out everything (my computer could only reboot in safe mode or safe mode PROMPT, not normally and ZERO usb connections worked) so after trying everything (If I'm not sure about something I don't change the information) I reformatted the Internal harddrive and now it will read the keycards/jumpdrives and the computer works fine now but it will still not read the external HDD. When viewing "devices by connection" it mentions the error with the SYSTEM INTERRUPT CONTROLLER... I'm just wondering where in the registry it sits because (theoretically) I can just copy it from another computer to mine. In addition, it now says that there is no Primary 1 or 2, or Secondary 1(master) or 2(slave) in the bios and yetthey work "crystal" from within windows. If ANYONE could help it would be greatly appreciated...everything else now works fine but when I have the External HDD plugged into the USB and I turn it on, it will get to the AUTOPLAY thing and then freeze (so naturally I thought it was just part of the External's FAT table that got toasted...). I'm at a loss...I was told it will pro'ly only take like 20 minutes to fix and I should just throw out the External after using "grave robber" on it but still if I can save it...thank... Read more

More replies
Answer Match 46.2%

I have no idea what happened, when I try to connect the modem directly to the PC, it give me "No Connectivity". But when I connect the modem through the router, it work!


Modem connect directly pic
Modem through router pic


A:Ethernet doesn't work but router work.

8 more replies
Answer Match 46.2%

I cannot find out why the following code doesn't work with IE7. Pressing the button doesn't add the text (table) to the page.
The code also loaded to

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "">
<script language="Javascript" type="text/javascript">
function func()
var mydiv = document.getElementById("mydiv");

var mytable = document.createElement("table");
var mytr = document.createElement("tr");
var mytd = document.createElement("td");
var mytext = document.createTextNode("this is my text");

<div id="mydiv"><button onclick="func();">click</button></div>

A:javascript code doesn't work with IE7 (work with FF1.5)

got the answer -
IE requires a tbody element to insert a table using the DOM

1 more replies
Answer Match 45.78%

Hello I am having issues where Windows is not recognizing my Arcade fightstick. According to what i've read it uses the same drivers as a 360 controller. I have followed the steps to properly install the drivers but no go. Help would be appreciated

A:Xbox 360 controller works but Madcatz Arcade Fightstick doesn't.

1 more replies
Answer Match 45.36%

i have a win7 x64 computer and i recently bought a 360 pc controller reciever online that is an official microsoft product. i have a wireless 360 controller which is official too. i installed the driver that came on a disk but found out it was an older version and meant for winxp. so i went online to microsoft and downloaded the driver for my computer. it says it installed correctly and the controller app works and connects to the controller. but the controller doesnt do anything. is there a way to fix this problem?

A:360 controller won't work with Win 7

My wireless 360 controller works in 7 x64 without any extra apps, I simply installed the driver from Windows Update.

2 more replies
Answer Match 45.36%

I have gotten them (the xbox 360 controllers) to work before, both wirelessly (with an adapter) and wired, so I have ZERO idea why they are not working now. Ok, I already have the drivers installed and updated and so is my computer. Normally when I plug them in I can control the cursor and even click on things using the buttons, but it doesn't seem to do that anymore. I've restarted and reinstalled the drivers multiple times. And here's the kicker, when I go to Devices and Printers the computer sees them and recognizes them. It even sees that I'm pressing the buttons and moving the sticks when I go to the controllers properties.

Somebody please help, I've been at this for hours now.

A:Can't get 360 Controller to work at all

Also I'm running Windows 7, 64 bit Serv Pack 1. I don't know if I should be posting this here or somewhere else. If I should post somewhere else, please direct me.

1 more replies
Answer Match 45.36%


I just now finally found the old usb cable for my PS3 controller, and have plugged it in and installed the drivers. My PS3 controller is just flashing. I Google searched, but I'm not sure how up to date those methods are. Plus, my anti virus says that MotionJoy is maleware/suspicious.

Can you guys help me get this working? Thanks. I'm using Windows 8.1

A:Need help getting PS3 controller to work

Hi there!

I got my PS3 controller working by installing the Xbox 360 drivers. There's no other software installed apart from that and it appears to be working.


18 more replies
Answer Match 45.36%

I've got a new USB controller which came with an installation CD which I ran. However I still can't get the controller to work (wanted for game use), nothing happens when I use it. It says the drivers are up to date and in the device manager it shows up as a USB Input Device under Human Interface Devices. Any ideas anyone please?

A:Can't get USB controller to work

It would be helpful if you posted more details about the controller? Brand, make, model, etc.

6 more replies
Answer Match 45.36%

I bought a USB 2.0 controller for my desktop and I installed it. It works and will function but it does so at the rate of USB 1.1 . Also, when i plug something into it I get a the message that says the drive can perform faster if it's plugged into a USB 2.0 port. I'm running Windows XP.

A:USB 2.0 controller won't work

Have you updated to SP2?

3 more replies
Answer Match 45.36%

I'm building a computer at work to deal w/ some huge data files (160GB+). I'm using an Areca ARC-1213-4I R SAS/Stata RAID controller card to run a RAID 10 setup w/ 4 Seagate Barracuda SATA III 3TB hard drives. The card has a single SAS port on it, so I also purchased a cable w/ SAS connector on 1 end and 4 SATA connectors on the other. I've installed the latest driver for the controller card. I'm running a fresh installation of Win7 Enterprise 64-bit on an SSD boot drive that connects directly to the motherboard (ie, not connected to the RAID card).

When I access the card's BIOS menu at boot-up, it says that there are no storage devices available. Thru a process of elimination, I know that the drives and the power cable to the drives are all good. So that leaves the SAS-to-SATA cable, a hardware issue w/ the card, or a configuration problem w/ the card.

There are no troubleshooting instructions in the manual, and knowledge base on the Areca website wasn't helpful. Any ideas on how I can troubleshoot this?

A:Solved: RAID controller card doesn't recognize hard drives

Turns out that the SAS connector has a double clasp on the end. So it felt like it was pushed in all the way, when in fact it was only pushed part of the way in. It's building the array right now...

1 more replies
Answer Match 44.94%

Please help:
I can't get this computer to run the files for the drivers(Zipped files). I have 7-Zip to open them.
Thanks for any help.

A:yellow ! on Video controller and. ? on multimedia Audio controller, RAID controller, and an unknown device

Just to add, I tried updating the drivers but windows won't run the downloads.

2 more replies
Answer Match 44.94%

I need a PC controller for gaming to work with Acer Aspire E15, windows 10 OS. Any Recommendations. I have tried a couple and both times the controller is not recognised, even though one worked on a toshiba laptop with windows 10 OS. 

More replies
Answer Match 44.94%

I have installed a ps3 controller to my computer, it connects through bluetooth, Windows 7 recognises the controller and all the buttons/axis work. But when i run Call of duty MW2, Anyone have any ideas how to fix? PS ; I run the game through steam, it works perfectly through mouse and keyboard, i would prefer the controller to be the input device.

A:PC controller will not work on games

The info I have found says emphatically the PC CoD MW2 does NOT support the PS3 game controller.

There is an add-on routine that allows mapping of the PS3 controller to keyboard inputs so it'll (supposedly) work.

Go here -> and read on their forums and do some other research FIRST.

1 more replies
Answer Match 44.94%

None of the eSATA controller cards to hook up an external HD are for Win 7 and 64 bit. I guess it is all too new but now I can't use my new external drive with a sata connection on my Dell 546 desktop. Does anybody know who makes them? I've been through 2 cards and trying different drivers with no luck. My computer only has 4 sata ports and they are all taken.

A:Can't get an eSATA controller to work with Win 7/64

Go to the this dell site and follow the instructions and the driver should be here: Dell - Drivers and Downloads

9 more replies
Answer Match 44.94%

My dad has a raid controller so he can add another 4 IDE drives, it initially detects it at the bios stage and detects the drives ok, but after windows loading it does not detect the PCI raid controller card, therefore not picking up the drives ither.

The card is an Ultra ATA 100/133, have tried to get the drivers twice but they do not work

Does anyone have any ideas bout this??

A:Raid Controller Will Not Work

Are you sure the card is not detected? In Device Manager switch to view devices by connection and navigate your way to the PCI bus.

Try the controller in another PCI slot?

1 more replies
Answer Match 44.94%

Hi , does anyone know what i have to do, to get a USB contoller to work on a game, thanks

A:A controller to work on a game

Hi joedee111....some games do not support all gamepads/controllers. You may be able to find out if yours is supported by reading the 'readme' file of the game.

Also, some games I have played require a slight registry tweak in order for the pad to work properly. Fifa05 was one of those games.

Hope that helps

3 more replies
Answer Match 44.94%

tell me if I'm wrong please...

Compaq Desk Pro P2 333MHz...put in a scavanged Maxtor HD and got everything working except......Primary IDE Controller

I can't load new driver from Win 98 as it says the best one is aleady installed..and get the message in Performance.."Drive C is using compatablility mode file system..

do I need to do a format c?


A:Primary IDE Controller ...won't work

6 more replies
Answer Match 44.94%

I downloaded some great games from Although the graphics and sound are working fine, I can't get either my gamepad or keyboard to move the character. It will only move it forward, but not back or side to side. I tried redownloading the game, but it still won't work.

If you can help me, please use simple terms (computer dummy here)

Thanks so much for any help you can give me.

A:Can't get controller to work with games

Try looking in those little bars at the top of the screen, and search for somthing labled settings, controlers, input devices, etc. and make sure all the controlers are set up correctly.

3 more replies
Answer Match 44.94%

hi i have purchased pes6 (pro evolution soccer 6) for the PC and when i go to the game screen my controller dosnt work at all. the only way i can get into the game is via the return button. please help i cant play soccer on the keyboard and haven't a clue what to do.

A:controller wont work

What gamepad are you trying to use?

1 more replies
Answer Match 44.52%

here's my problem, as near as I can tell,

a few months ago the wireless connection on my hp laptop stopped "seeing" my wireless network. Eventually, during a scan with my panda security system a virus was found (for some reason it is no longer in the logs-but is was, I think, trojan or sasser in my outlook folders-and it was deleted). The wireless seemed to work again but then went back to being "invisible" to my wireless detector on the laptop. I went to HP downloads to see if I could just update the "driver" and ended up updating "system bios" which seemed to work also, for a while, then the system goes back to not seeing the wireless. I could sometimes do the right-click "repair" option to get it to connect but that stops working after a while. I think that there is still some residual virus lurking in the system to cause this problem so that is why I am posting here. Thanks for any help you can give

I am not exactly sure if this is where I attach the dds.txt text but will put it here just in case:

DDS (Ver_2011-06-23.01) - NTFSx86
Internet Explorer: 7.0.5730.11
Run by Victoria Jerome at 22:11:58 on 2011-06-23
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.990.170 [GMT -6:00]
AV: Panda Internet Security 2010 *Enabled/Updated* {4570FB70-5C9E-47E9-B16C-A3A6A06C4BF0}
FW: Panda Personal Firewall 2010 *Enabled*
============== Running Processes ===============
C:\WINDOWS\system32\svchost -k DcomLaunch
... Read more

A:internal wireless doesn't work (computer doesn't see my wireless anymore)

Hello, Welcome to TSF.
I'm nasdaq and will be helping you.

You may wish to Subscribe to this thread (Thread Tools > Subscribe to this thread) so that you are notified when you receive a reply.

Please read these instructions carefully and then print out or copy this page to Notepad in order to assist you when carrying out the fix.

Note that the fix may take several posts. Please continue to respond to my instructions until I confirm that your logs are clean. Remember that although your symptoms may vanish, this does NOT mean that your system is clean.

If there is anything you don't understand, please ask BEFORE proceeding with the fixes.

Please ensure that you follow the instructions in the order I have them listed.

Please do not install or uninstall any programs, or run any other scanners or software, unless I specifically ask you to do so. Also please copy and paste logs into the thread, rather than add them as attachments.

Please download ComboFix from one of these locations:

Link 1
Link 2

* IMPORTANT !!! Save ComboFix.exe to your Desktop
Disable your Anti-Virus and Anti-Spyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our tools
Double click on ComboFix.exe & follow the prompts.
As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's strongly recommended to have this ... Read more

11 more replies
Answer Match 44.52%

Updated to Windows 10 from Windows 8.1 two weeks ago.
Had problems with Firefox.  Tried to download to replace existing Firefox.  CNET site appeared to be correct but something seemed wrong so I killed the download. But.
- The windows start menu doesn't come up when I click on the icon, but if I right-click, a text menu does appear and lets me, for example, shut down.
.- If I click on the Windows End icon in the task bar, the screen flashes but End does not come up.  Ditto for the Windows Store icon.
-  Somewhere SpyBot S&D was erased, but I was able to download it.
- If I double-click on a photo in Windows Explorer, I get a popup that lists the name of the jpeg and says Invalid Entry to Registry.  If I right click on the photo and go to any of the options the photo is opened except if I choose Photo.
- Firefox cannot properly display the Yahoo mail page, though Pale Moon and Opera can.
- I have Avast Anti-Virus and MalwareBytes Anti-Malware and when I run their scans, they find no issues.
SO there are a few issues that I need help with.

A:windows 10 problems - start menu doesn't appear, windows key doesn't work, etc

Well the first thing you should try is to Run System Restore to before all of these problems started or to when you first installed Windows 10.
Then try to download Firefox from there website
Third thing is I would recommend to get rid of Avast it is low end and could be allowing virus I recommend ether McAfee or Norton Security.

Those are some things to think about
but it is all up to you when making your final decision

5 more replies
Answer Match 44.52%

I need the drivers for this. can you help? Operating system windows 7, 64 bit, intel celeron r 3.2ghz, EVGA Board. i cannot find the drivers on the evga website.
MOTHERboard is a 133-P4-NF51-AX

A:sm bus controller driver

7 more replies
Answer Match 44.52%

i need 3d video controller driver. 3d video controller driver ids: PCI\VEN_10DE&DEV_1140&SUBSYS_2337103C&REV_A1PCI\VEN_10DE&DEV_1140&SUBSYS_2337103CPCI\VEN_10DE&DEV_1140&CC_030200PCI\VEN_10DE&DEV_1140&CC_0302

View Solution.

A:i need 3D controller driver

Hi, Please go to the following site to download Nvidia driver for your machine:   By the way, what is your machine ? Please use the following instructions to find out the model/product of your machine:

4 more replies
Answer Match 44.52%

I need the driver for the USB controller for an envy Phoenix 810-160. motherboard in the system is an MS-7826 ver 1.0  the device manager under "other devices" says there is no driver installed.  i tried all the usual fixes, uninstall it, reboot, update driver etc. to no avail.  USB 2.0 ports work but 3.0 ports do not recognize any peripherals, but they will slow charge a cell phone when connected so they are getting power. Thanks for the help

More replies
Answer Match 44.52%

Hy my name is Dane and I need help with some drivers.

I can`t fined drivers for SM Bus Contoller.

My laptops is Acer Aspire E1-731
Windows 7 Professional x64
Manufacture: Intel Corporation
Chip type: Intel(R) HD Graphic Family

Please help.

A:Help SM Bus Controller Driver

Hi Welcome to Seven Forums ... Try the Chipset Driver ...
Acer | Download

6 more replies
Answer Match 44.52%

Reinstalled Vista-64 on my Dell Studio 540 and finally everything is working except the SM Bus Controller (missing driver).

Nothing has worked from any of Dell's disks or from the website. Have downloaded drivers from Intel for their G45/G43 Express chipset and it did not solve the problem. Actually it inactivated the display adapter, so had to roll back the driver to previous (difx64.exe file version

Motherboard: Dell 0M017G A00.

I have no idea what the SM Bus Controller runs...everything is far.

Any help would be appreciated.


A:SM Bus Controller Driver

Thanks for posting Intel's latest updates.

Updating/Installing Java was needed before the whole process worked.
Intel updated 16 drivers, including the missing driver.
Doing a complete reinstall of Vista 64 this late sure is not fun.


1 more replies