Tech Problem Aggregator

Canon MP160 driver

Q: Canon MP160 driver

Hello, I have Toshiba Satillite laptop with 32 bit Vista. I tried to uninstall my Canon MP160 printer driver and install it again. It said I have a printer drive installed. I cannot find a printer in Control Panel. So, can someone tell where I can find the driver and delete it?
Thanks, alanrr

A: Canon MP160 driver

Hi welcome to the forum.
I am unsure why you cannot find. I press Sart > search box type printer > press enter , I have a full list of things
that are on the computer re: printers.
Control panel > I have printer, on others it's devices & printers.
If it is not under category in control panel, I would assume not installed properly.
Sorry, maybe more info is you have, what's on screen, error messages etc?

4 more replies
Answer Match 76.44%

could anyone pls help me. i have a canon mp160 all in one printer and it pulls the paper in quicker on the right side resulting in a crooked print. i have heard of this but not sure what the resolve was if there was any
thanx much

A:canon mp160

I saw your post in another thread

I don't have a problem with this in my S9000, but my grandmother's i960 did. I ended up having to tighten the guide to the paper more and keep the back of the tray away from the wall (it was pushed right against it). It wasn't the machine's fault, anyway, but mine.

1 more replies
Answer Match 76.44%

Have a canon mp160 printer which is installed on one of my printers but I now want to install it on another but cannot for the life of me find the install disk, what do I do???

A:canon mp160

Go to cannon's site and download the driver for your printer. If it is an all-in-one type, you might need to download the software suite as well.

3 more replies
Answer Match 75.6%


I just installed Windows 7 and my printer doesn't seem to work.. Its a Canon pixma MP160.. i guess i have to install the proper drivers.. could someone help me out with this?

A:Canon Pixma MP160

Quote: Originally Posted by jana


I just installed Windows 7 and my printer doesn't seem to work.. Its a Canon pixma MP160.. i guess i have to install the proper drivers.. could someone help me out with this?

You should be able to install the Vista drivers for it.

2 more replies
Answer Match 75.6%

Hey Folks, I have a Canon MP160 and I am trying to print photos, but they always come out redder that I want, I found some NTSC Color Bars and printed them and Magenta is purple and red is deep orange, I did a monitor calibration with a Spyder Pro and thought that corrected the problem but to no avail, any suggestions?

A:Canon Pixma MP160

what kind of printer are using
are you using the correct profile for the type of paper

getting a print to look like it does on your monitor requires carefull calibration and printer profiling

1 more replies
Answer Match 75.6%

I have Canon MP160 printer connected via USB port. Turning on printer it has been installed, but printer does not working. Using Microsoft Office 2007 Word and choosing this printer, status of this printer is inactive.

I try with driver downloaded from Canon web page, but I did not resolve the problem. Do anyone have some god advice on this issue?

A:Canon MP160 printer


On notebook's manufactor home page dowload USB Driver and installed it.

Now it works OK.

1 more replies
Answer Match 75.6%

I attempted to change an ink cartridge and the print head belt came off, but then as I was replacing it, I managed to dislodge a clear strip, one end marked L (for left, I assume) with what appears to be 2 magnetic dots, one at each end, for a stop position. The strip is intact, but I can't seem to find where the right side of this strip attaches to the rail, at least not without taking the whole machine apart. Can anyone help? Thanks in advance for your time and input.

A:canon mp160 problem

Closing duplicate thread too:

You can bump up by your post by replying to it if you have not received a response with 24 hours rather then starting a new thread.

1 more replies
Answer Match 74.76%

Hello all my printer was working fine until recently. When I try to make it print it pulls down the paper a couple inches, slightly crooked and tells me paper is jammed. I put it in perfectly straight it's the pull that is causing this. After this happens I can pull out and put back in the 1 sheet of paper the couple inches that it went in. I am not afraid to take this thing apart if I need to I just want to fix it and need to know what to do. Thanks.

More replies
Answer Match 74.76%

I have an Canon MP160 printer. I appears that the printer has some problems in recognizing the cartridges. The cartridges are not empy. I have uploaded an image with the problem.

A:Problem with Canon MP160 printer

Printers have this smart technology of knowing when Cartridges have been refilled, or not the correct type

error codes
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber full

1 more replies
Answer Match 74.76%

My Canon printer worked fine with Windows XP and Vista, but now on a new computer with Windows 7 it will not scan. It prints OK and I have downloaded the newer MP Navigator 3.1 and a few alternatives, but when I try to scan a window opens and says I do not have the appropriate scanneeer driver. I have searched many sites, including Canon and have found nothing that works.

A:Canon MP160 printer and Windows 7

Try here:

3 more replies
Answer Match 74.76%


I bought my PC with XP pre-installed just over 2 years ago and have had no real problems until recently. A few weeks ago I bought a new Canon MP160 printer/scanner. Installation went smoothly and no apparent problems ...

BUT starting yesterday I started getting crashes (all the way to Blue Screen of Death). To the point where I had two crashes in one hour.

Since adding the MP160 was my only recent change I've uninstalled the drivers. So far so good, no more crashes. I'm certainly a long way from proving that the MP160 is the source of my problems, but it certainly would appear to be a tenable hypothesis - though the fact that the problems didn't start immediately might be a counter argument.

I do need to print - but nothing that won't wait a week!

So two questions:

1. Any reports of similar problems? (I've searched this site and did a quick google, but nothing apparent. I've also emailed Canon - but its a public holiday).

2. Any advice for when I reinstall the drivers? (Or even good things to do before that point?)

Anticipating basic suggestions .....

I have McAfee installed and run regular scans automatically. I just ran a manual scan - 19 cookies found but nothing else.

I've cleaned out temporary files and the like. No shortage of space on my disk.

I'm tempted to do a disc defrag (haven't run one for a while), but I'd like to feel a lot more confident that I'm have removed the cause of the crashes b... Read more

A:BSOD - associated with Canon MP160 drivers ??

6 more replies
Answer Match 74.76%

This was a thread that a previous user posted. It's currently closed but is exactly my problem:

Canon MP160/Vista issue I have Vista Home Premium and a Canon MP160 multifunction printer. I have the latest drivers installed from the Canon website but for some reason, the MP Navigator vers. 3.02 for Vista is not working.

This program is for the scanning function of the printer and after install, when I double click it, I receive an error that says 'The scanner driver supported for this software is not installed. Install it and then retry.' So I uninstall everything and then reinstall but the outcome is always the same. The printer function works perfectly but the scanner function is not working. I have even tried as a last resort the MP Navigator for MP960 printer but I receive the same error.

If everything were running normal, all I would do is press the Scan button on the printer and this MP Navigator is supposed to automatically run and help me with the scan function. When I do press this button, there is no response at all. I have even restarted after install but to no avail. I right-click the icon for MP Navigator and change the compatibility mode to XP and to start program as an administrator and result is always the same, 'The scanner driver supported for this software is not installed. Install it and then retry.' I search the Canon website for this scanner driver but there is nothing! Help! Please!

A:Issues With Vista and my Canon MP160

Uninstall the software.

Right click on the Canon installer file and select properties, compatibility tab, check the run as admin box, hit OK. Now double click the installer to install the software, see if it works now.

The installer should be labeled "mp160win111ea23.exe"

2 more replies
Answer Match 74.76%

Hello helpful people,

First attempt to refill the color cartridge for MP160 printer, the orange 'Color' light goes on, and it refuses to print in color. No error message. No window popping up to say you are out of ink, it just merrily prints in black ink only. (Yes, I have it set to use both cartidges, not just the black one).

How do you reset this? (Manual says press the color button....this sometimes works for that printing attempt only...but is not working in this case.)

Or better yet, turn of the Ink Level Detection entirely.

I have spent 2 hours Googling this, people claim to have answers, which are all relevant to other printers, and do not actually work for the MP 160. Much more time messing with it and trying to decifer the manual.

I don't want to hear, 'temporarily swap in a different cartridge, to make it think your old one is new'. Then I have an expensive new cartridge drying up while I am using the first one.

Related question: There is a 'maintenance' button (not described by the manual of course) which cycles through 9 letters (not described by the manual of course).

I believe one of these letters may mean, 'turn off the lying, useless, infuriating Ink Level Detector', but I have no way to know which one.

Somewhere there should be a list of what all 9 letters mean, but my attempts to find it on the All Knowing Net have failed....does this magical list exist? I see forums where people beg for this list, but now... Read more

More replies
Answer Match 74.76%

I have Vista Home Premium and a Canon MP160 multifunction printer. I have the latest drivers installed from the Canon website but for some reason, the MP Navigator vers. 3.02 for Vista is not working.

This program is for the scanning function of the printer and after install, when I double click it, I receive an error that says 'The scanner driver supported for this software is not installed. Install it and then retry.' So I uninstall everything and then reinstall but the outcome is always the same. The printer function works perfectly but the scanner function is not working. I have even tried as a last resort the MP Navigator for MP960 printer but I receive the same error.

If everything were running normal, all I would do is press the Scan button on the printer and this MP Navigator is supposed to automatically run and help me with the scan function. When I do press this button, there is no response at all. I have even restarted after install but to no avail. I right-click the icon for MP Navigator and change the compatibility mode to XP and to start program as an administrator and result is always the same, 'The scanner driver supported for this software is not installed. Install it and then retry.' I search the Canon website for this scanner driver but there is nothing! Help! Please!

More replies
Answer Match 74.76%

Both black and color cartridges brand new, but error says cartridge not recognized. Suggestions would be welcome.

A:Canon MP160 E5 printer error

7 more replies
Answer Match 73.92%

Toshiba Laptop Satellite A135 windows vista home edition 32 bit..
Canon MP160 Printer

Printer works fine on Windows XP computer, Drivers downloaded from disk
Windows vista Computer will not communicate with printer even with driver downloaded from Canon website, specifically for the mp160.
Canon support tech could not solve by phone, anyone have any ideas?

A:Windows Vista Canon MP160 Incompatible

11 more replies
Answer Match 73.92%

Hi all,
I am getting an erroneous paper jam message from my canon MP160 that I can't get rid of. The message says that "Error number:1300. Paper Jam. Removed the Jam paper and press the start button on the printer". I have reset the printer and the computer. They didn't help. I am using a imac, but the problem is definitely in the printer because it gives the message even without being in contact with the computer.


A:Canon MP160 gives erroneous pager jam message

Possible repair for E3 warning code PIXMA MP160 Paper Jam which does not exist.

Have you run a 3 paper clean procedure? if not try that.
Try a thin cardboard A3 size and run that through the printer.

If this has not fixed the E3 jam, then I call it a E3 phantom Jam.

It seems to be a serious problem for Canon PIXMA MP160 printers.
Several web searches shows me this is a big problem.
Finding help seems to be very scarce on the ground with this one.

However, today (as I'm also suffering from the same fault), after seeking help and being told, take the printer to a service agent (100Klm away) I baulked.

I have taken my PIXMA printer apart 3 times now, so this access procedure does work.

Remove the power cable, and the USB cable.

Take the printer to a solid table.

Beware there are many small screws that have to be located.

Warning, this may not fix your MP160 PIXMA, you might break a wire, drop something, or loose a screw, its your responsibility what you do from this point on, not mine.


Reading from this point on it is assumed you have taken the responsibility upon your self.


OK, YOU need to take your printer COMPLETLY APART to "fix?" this E3 error.
You will need
a philips screwdriver (magnetised would help).
a small knife

Remove the paper flip, lift up stand from the rear, and the flip down door from the front of printer.

Take care at the front door, dont break the hinge tap... Read more

2 more replies
Answer Match 73.92%

My mp160 printer/scanner has no power when on switch is operated. Does this printer have an internal fuse and if so how do i get at it? The power cord tests OK.

A:Canon Pixma MP160 printer failure

i have a printer in same model series. the scanner part isnt all that good when you have to scan big items & after 6 months the writing head on the mem. card reader died

as for your prob i can only say this if its still warrented take it in. if its not dont bother with trying replace parts because it would cost less to replace the entire printer than paying more for a single part. but if it was a power surge that fried it theres really no way to fix that unless you have an store issued extended warrenty.

2 more replies
Answer Match 73.92%

I was changing the print cartridge and managed to unhook a clear strip with a dot and letter L on the left side, a dot on the right. I found the tang on the left to hook to, but cannot find where it hooks on the right side of the rail. Please help!

More replies
Answer Match 73.92%

I have Vista Home Premium and a Canon MP160 multifunction printer. I have the latest drivers installed from the Canon website but for some reason, the MP Navigator vers. 3.02 for Vista is not working.

This program is for the scanning function of the printer and after install, when I double click it, I receive an error that says 'The scanner driver supported for this software is not installed. Install it and then retry.' So I uninstall everything and then reinstall but the outcome is always the same. The printer function works perfectly but the scanner function is not working. I have even tried as a last resort the MP Navigator for MP960 printer but I receive the same error.

If everything were running normal, all I would do is press the Scan button on the printer and this MP Navigator is supposed to automatically run and help me with the scan function. When I do press this button, there is no response at all. I have even restarted after install but to no avail. I right-click the icon for MP Navigator and change the compatibility mode to XP and to start program as an administrator and result is always the same, 'The scanner driver supported for this software is not installed. Install it and then retry.' I search the Canon website for this scanner driver but there is nothing! Help! Please!

lol, thanks for viewing my post.

More replies
Answer Match 73.92%

I have just downloaded the MP navigator in order to scan from my Pixma MP160, which I have had for 3 years now, but have never used it for scanning. The icon appeared on my desktop, but when I press the scan button and I choose MP navigator as the program to use, it tells me that the driver is not installed. How is this possible? I downloaded it from the Canon site and I do not see any separate downloads for drivers...

Does anyone know what I should do?


A:Canon Pixma MP160, scanning and MP drivers

Have you downloaded the drivers from this page?

Canon PIXMA MP160 Photo All In One Printer

Have you installed the actual printer driver? It's the first one listed on the screen shot.

1 more replies
Answer Match 73.92%

I am pretty tech savy but I can't even

1. load the ink cartridges

2. get the paper to feed

3. after installing the drivers they are not recognized

Whacking head

A:nightmare setting up Canon Pixma MP160

Is the printer even coming on? Any lights on or blinking?

3 more replies
Answer Match 73.08%

G'day there,
I recently purchased a canon mp160 all in one printer and i'm having problems getting it running. I've been able to install all the software, but i think the driver is playing up. Once i've installed the software i can use the printer, but when i disconnect/turn off the computer and turn it on again, i get a message saying something like 'usb device not of the devices attached to this computer has malfunctioned and windows does not recognise it' i'm not able to use the printer anymore!!! The only way to use the printer again is to uninstall the driver and install it all over again...quite frustrating!
Any tips/ideas on how to solve this problem would be very much appreciated!!


A:Solved: Canon MP160 printer problems! :confused:

Welcome Aimee.

Firstly PLEASE remove your email by using the edit button, or the spam collectors will have a field day with it!

Secondly, any chance you could tell us what operating system you are running?

If it is Windows, what version? (98, ME, XP etc)

3 more replies
Answer Match 73.08%

I have an older canon mp160 printer. When I scan a picture to e-mail or "pictures" in the computer it has a severe pink tint to it. However when I copy the same picture the colors are perfect

More replies
Answer Match 52.5%


I need help..please ))
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..

advice please..??

A:Window 7 64 bit cannot install driver sotware(canon printer driver)

Hi did you try a system restore to a point when it did work.

2 more replies
Answer Match 48.3%

It seems like this is an impossible task.

I work at a non-profit (read: no budget) and our 3 computers crashed. We got a new laptop donated and everything is installed on it. However, we cannot find a driver for our copier:

Canon GP 200

Which supports Windows 7 Home Premium 64 bit


We cannot afford a new printer and everything is set aside from this... anyone?

A:Canon Driver

Hi sunnyslope, Welcome to the forums, I'm afraid doing a quick search failed to find a driver for the printer after 2005 and that was for win2000/XP Canon U.S.A. : Support & Drivers : GP200 you may be able to try to install these drivers in compatibility mode

9 more replies
Answer Match 48.3%

Have just got new computer running XP Home Edition.Printer is a Canon LBP-660. Downloaded driver from Canon website but it will not load as the error message states that I need to be using Windows 95 or 98. Yet it worked on my old computer running XP pro. Is there another compatible driver I could use? Any help greatly appreciated.

A:Canon LBP-660 driver

Have you tried the Windows 2000 drivers:

1 more replies
Answer Match 47.88%

I have a Canon BJC 4400 bubble jet printer that was given to me. I downloaded a driver for it (version 3.97) but when I try to install the driver a window comes up entitled "Extraction Progress" and extraction completes and then a window comes up saying "Canon Information", "all items were successfully extracted." I click OK and the next window that comes up is entitled "Readme-Notepad" in which information about things such as installation but when I close that window nothing else happens, it goes back to my desktop. I'm using Windows Me. I downloaded a driver for the same printer for my laptop which has Windows XP and it installs without any problem. All steps for adding a printer were followed. Version3.97 is for Windows 3.1, 95, 98, and Me. Any help would be appreciated.

A:canon bjc printer driver

is it just extracted into a temp file and then waiting for you to install
post the link to the driver page and I will have a look

1 more replies
Answer Match 47.88%

I can't find the driver for the Canon MF8000 printer on Windows 8.1? Can someone help me?

A:Canon MF8000 Driver?

Don the Canon site is a bloody nightmare I just need to know where you are because searching is asking me for country etc etc and I saw you results were in some language I don't know.

9 more replies
Answer Match 47.88%

Does anyone know where I can get a driver for a Canon BJC 5100 printer.
I seems that Canon themselves do not and will not supply the driver for this printer to operate in Windows XP.

A:Need a Driver for Canon BJC 5100

7 more replies
Answer Match 47.88%

I am looking for a XP driver for the Canon BJC5100 printer. I have seen on the canon site that they don't exist, but I didn't know if someone might have one by now. Some say that a 2000 driver will work with some tweaking but I don't know how to tweak it. Any help would be appreciated. Thanks.

A:Canon BJC5100 driver

Hi gobblerhuntr,
Try here !

1 more replies
Answer Match 47.88%

Hello! I hope this is where this goes, If not I apologize.
I just got a Canon PIXMA Mg5422 and I have already set it up with my router and iPhone and it works just fine. I put the disk in my laptop (HP G60, Windows 7) and everything is fine. I'm a little confused though, the current installation step I'm at is a "Software Installation list". The software that ARE checked is MP drivers, On screen Manual, My printer, My image Garden, Quick Menu, Adobe RGB (1999), and Easy web-print EX. The bottom software is ''XPS driver'' and it is not checked...Do I need to check this or not? I currently don't own a camera to go with the printer (such as a canon) but I do hope to be buying a camera in a few months (not sure on brand). I'm not really sure what XPS driver means. Please help! Thanks.

A:XPS driver Canon MG5422

No, you don't need it, its optional.

You can read up more on it on Wikipedia:

1 more replies
Answer Match 47.88%

Hi sorry for probably another printer issue but this one is a little odd.

I have a canon pixma ip3000 and when i installed it on my W7 64, windows update found it and made it work...great

Problem is my dad is having the same problem with his newer canon pixma ip4500 except windows update isnt finding a driver for it.

The canon site only has this add on driver for some maintenance utillity but doesnt actually have the main driver ! so how can we get this newer model working ?

Thanks for any advice

A:Canon driver not found with W7 ?

Download the Vista driver from Canon. You may have to install it in Compatability Mode.
If you are using Win 7 64bit get the Vista 64bit driver. Win 7 32bit get the Vista 32bit driver.

Here is the tutorial. Option One or Two.
Compatibility Mode

There are no Windows 7 drivers.


9 more replies
Answer Match 47.88%

Canon does not have drivers for Picma MP450 Vista. Does anyone know where I can get drivers for the MP450 product for Vista? Thanks, Charles

More replies
Answer Match 47.88%

Need driver for canon LBP 1210 windows 7 x 64bit. Any ideas?

A:Canon LBP 1210 driver

Try here:

Laser Shot LBP-1210

4 more replies
Answer Match 47.88%

I just got an HP with Vista x64 and Canon do not offer the right driver for the MF 3110 yet. Anyone know of a fix for this problem. We have 2 of those printers in the office and i cant use them. Thank you...

More replies
Answer Match 47.88%


I uninstalled my Canon iP3000 software, and then when I tried to reinstall it, it got to a stage in the setup process where it asks you to connect the printer to the PC. But where the PC would normally detect a new hardware device, it didn't. My guess is that the driver wasn't uninstalled, although when I look under drivers, I can't see anything under Canon. (I have Windows XP pro). The installation cannot proceed without this, and the computer doesn't detect the printer.

I had originally installed the printer software with Ashampoo, so I used that uninstaller to uninstall, but it seems even that didn't detect everything.

Could anyone offer me some advice?



A:Canon driver problem

13 more replies
Answer Match 47.88%

I notice that there are a number of posting in regards 64-bit drivers for Canon printers but no other posting for the Canon LBP 5100. I purchased this printer around 12 months ago and simply love it, mainly due to the auto duplex that make printing out PDF such an easy task.

I intend building a new computer in the coming months and have more or less decided on installing Windows 7 Home Premium or Pro (Retail) 64-bit. The only major problem I can see with the 64-bit is with the Canon Printer LBP 5100, the canon website shows a 32-bit driver for Vista but no 64-bit versions. Contacting Canon NZ I received a reply stating that as far as they can ascertain there will be no 64-bit drivers for this printer unless Canon Japan decides different.

Questions please: I have been told that Windows 7 will come with a driver for the Canon LBP 5100 but can't find any information in regards this, so my question is does Windows 7 come with a driver for this printer?
If it does will the auto duplex still work?

Anyone knows how to contact Canon Japan (in English) about a 64-bit driver for this printer?

Had anyone that uses this printer come across a work around for a 64-bit driver for this printer.

A:Canon LBP 5100 64-bit Driver

Their is a similar post above yours for the lpb 5000. And from their question I can ascertain that windows 7 doesn't come with a driver for your printer since they can't be theirs to work. Even if W& did cone with a driver it would be a printer driver (just basic ) and most likely wouldn't include the applications needed for duplex. Sorry but after 7 is released on the 22 nd maybe with enough inquiries cannon will get with the program. But from their point of view i assume they would just rather sell you a newer model printer. Fabe

9 more replies
Answer Match 47.88%

i have win xp and my printer does not work with it. I have tried many drivers but none work. I tried downloading the windows 2000 driver and then running bjc the printer angel but my trail for printer angel had expired. Where can I find a working windows xp dirver for canon bjc 5100?


A:Canon bjc 5100 driver

XP doesn't list it in it's normal set of drivers? Odd!! Try a Canon driver for a printer that is similar to yours in the defalt set of XP drivers. If you don't see an XP driver on Canon's web site they don't have one.

2 more replies
Answer Match 47.88%


I have one problem. I have Windows 7 RC (build 7100, 64-bit) as my primary (only) OS. Everything works just fine but i have one "little" problem.
I have Canon Lide 60 scanner and its not working completely. I can scan winth CanoScan Toolbox but i can?t access scanner settings under control panel. And i can?t import/scan directly through Photoshop.
I just receive error message about WIA driver.

Here is screen:

I get this message when i am trying to double click on icon in control panel or in photoshop.

Any idea?

BTW: in Vista 64-bit this scanner works good.

A:Canon Lide 60 - WIA driver

Look in your old Windows VISTA/Windows directory for a file named twain_32.dll and copy it to your Windows 7/Windows directory.

Worked for me so I wish you same luck.

9 more replies
Answer Match 47.88%

i have a canon i320 printer....i lost the disk to install it....anywhere ican dl the driver

A:canon i320 driver

2 more replies
Answer Match 47.88%

Just bought a new computer with windows 7, can't get Canon multipass F50 driver to download. Apparently there is an incompatability issue between the two...Who's at fault here and what can I do about it? I need the printer and can't afford a new one and I've given away the old computer. Help!
Does Canon need to update their drivers or can Windows 7 OS come to my rescue?
Should I expect an update from Canon?
Thanks for whatever help you can give.

A:canon multipass f50 driver

Well it would seem they haven't offered support since Xp. The only choice you have is to try and install the XP driver in compatibility mode.Support - Color Bubble Jet Printer - Copier - Scanner - Fax - MultiPASS F50 - Canon USA Consumer Products To install in compatibility mode follow this Compatibility Mode . Fabe

2 more replies
Answer Match 47.46%

Can't get my Canon mono Lasershot lbp3000 to install, as WIN7 says driver(vista) not correct version of OS. Any ideas or workarounds that others have used to install Vista drivers on 7, until Canon get to writing 64bit drivers for 7? I have searched for the drivers on MS site but cannot find any.
Printer is usb and shows up in control panel as "UNSPECIFIED(1)- Canon CAPT USB Device".
My setup is Intel Core2quad [email protected], Asus p5q-em mobo, 4Gb 800MHz ram, 300Gb SATa Samsung HDD, onboard graphics.
My XP driver for my Canon MP520 printer works fine.

A:Canon LBP 3000 64bit driver? Help please

I'm much in the same boat as I own the same printer... Such a shame to actually have to throw it out and upgrade to something that's running compatible drivers as it's a great little printer.

Anyhow I don't like your chances of waiting for Canon to release 64bit drivers for the LBP3000. - Windows 7 support most likely won't exist either.

9 more replies
Answer Match 47.46%

Hi All-

I've got a Canon D661 connected via USB and I have been looking for a compatible driver for Windows Pro 64 bit. I'm not sure if this is possible, but if there is another driver that would just get the printer to print, that would be great!

Thanks in advance!

A:Canon Imageclass D661 64 bit driver

Hi ShantiK1, Canon tells me there are no 64-bit drivers for Win 7 64 bit machines (only 32 bit). the only thing I can suggest is running XP in virtual mode Windows XP Mode - Install and Setup this way you will have a working printer

2 more replies
Answer Match 47.46%

Canon Scanner 4200F;OS Windows 7 (64)Downloaded, from Canon site, the CanoScan toolbox AND the 64 bit driver.Both installed correctly and are recognized by the system.When I tried to scan, using the toolbox, the Scanner lamp goes on but the scan will not initiateand the error "Cannot communicate with the scanner - check cable and connection."Changed USB ports - same msg.reloaded drivers - same msg.Canon help claims that the problem is that the OS is "blocking the Communication"Q:  If this is true how do I unblock?

A:Canon Scanner driver problems

The issue IS that although the Canon supplied driver for the 64 bit Windows 7 OS loads the WIA driver is required for the scanner to operate.  The WIA driver that came with the 4200F is 32 bit and will not load.Contacted Canon support and finally got them to understand the situation.The outcome is that they are sorry for the inconvience - BUT there is no 64 bit WIA available.Looks like the only solution is to purchase a new, compatable, scanner.Canon won't get the business.Thanks to all.

19 more replies
Answer Match 47.46%


Does Anyone Know If There Is A Driver For Canon Powershot A550 Working
Under Windows98 Se Platform.

Alternatively,if There Is Any Driver Which Will Connect The Camera
To The Computer And Make It As A Drive From Which I Can Download Pictures


A:Canon A550 Windows98 Driver

7 more replies
Answer Match 47.46%

Dear respective team,

I am trying to install Canon LBP 1210 printer in Win 7 64 bit. I have searched driver in vendor site but was not success to get. Is there anyway to install above printer in 64 bit platform.

Your support is highly appreciated.

A:Canon LBP 1210 driver for win7 64 bit

check here this is the only one i can access from the canon site 7

3 more replies
Answer Match 47.46%


I have been searching several websites, downloaded a lot of junk and tested a great many so called solutions. In spite of all efforts I could not find a working solution for the LBP-1120 on W7 x64.
Although I guess most LBP-1120 users got tired of searching and simlpy threw away their printer, I refuse to do that. So I'm running it on Virtual PC under W7 x64, a complicated afair if one has to print just a few copies. The latest thread on this (and most other forums) is of 2009, so did anything happen after that date?
Does any one know of a working (tested!)driver solution for this printer? It's a shame that Cannon did not provide a decent driver. The vista / W7 x64 does not run on x64 platforms in any mode! Even for old Epsons I was able to find W7 x64 drivers.

Kind regards,
The Netherlands

A:Driver for Canon LBP-1120 Lasershot on W7 x64

First, make sure you uninstall any previously installed printer drivers in add/ remove programs which may conflict with the installation.

Check Device Manager for driver issues.

Select the newest version from the list. Then click download.

Do not turn on the printer until the software is installed.

Laser Shot LBP1120

9 more replies
Answer Match 47.46%


Just after some help with the MP780 on 7 x64.

The printer is plugged in via USB to another machine on the network. On the 7 machine I am running through the add printer wizard, which finds the printer and looks for drivers.

The first problem is that it can't find the MP780 drivers on Windows Update, which I think it should.

After it fails there, it asks to find the inf manually. I have downloaded the drivers from the Canon Australia website but that's just an installer. I have also downloaded drivers from other random driver sites but it just gives me fax and scan infs, nothing else.

Any ideas for me?


A:Canon MP780 Driver Issue

OK if you can install this it might work - make sure the driver package is unzippped to a folder - or just select the setup.exe file and do the following if it wont unzip - this resolves an OS mismatch when the driver wont install on w7

To install a driver OR program in compatibility mode - right click the setup.exe file - click properties - click compatibility - check run in compatibility with vista/xp etc - check run as administrator - leave the rest blank. Start setup.exe and install.

Driver page v6.20 - to download firstly click on the file, go to nxt page then - under disclaimer is download - select "i have read the instructions etc" then select download -in "red" and then click save

If that doesnt work try installing it thru device manager and pointing to the folder the driver is unzipped to.

9 more replies
Answer Match 47.46%

It's on the list of supported scanners for VueScan, which works without
requiring there be good Windows drivers installed.

It worked for me on Vista 64. You can try it free before paying for it. If you like it you can decide whether to buy the program or use the money for a new scanner. You don't need a driver for the Lide 30--this program does it all.

A:Canon Lide 30 driver for Vista x64

But I don't feel I should have to pay for a driver for the $80.00 scanner I just purchased a year ago (Yes, I got ripped off)

3 more replies
Answer Match 47.46%

Hi All
I have been trying to install the drivers for the above printer without success.
OS: W7/32,firewalls and antivirus disabled
Versions tried:
here and here the add on module.
Has anyone of you come across this problem?


A:Canon s6300 driver problem

Hi all
I just had to go through and w7 found it and all is sweeet!

1 more replies
Answer Match 47.46%

When I downloaded the driver from Canon for this printer/copier, it wouldn't work on my 64 bit OS. Canon support confirmed that there is no 64 bit driver and no current information about whether they will offer one.

Any suggestions about alternate ways to get this printer to work? I didn't realize that the Vista driver would only work for 32 bit, grrr.

Thanks in advance.

More replies
Answer Match 47.46%

I pulled an old printer out of the closet to use on a new PC that I am building...just to have a printer connected to it. It doesn't work with the print driver provided with WinXP and Canon no longer supports it. Does anyone know where I might find a print driver for it. It prints test pages very nicely.

A:Canon BJ-200 Print Driver for WinXP?

7 more replies
Answer Match 47.46%

Have a new Vista 64 Home Premium machine. Have a Canon i950 printer on my XP machine. Canon does not have a Vista driver for the printer. In these forums, found a post explaining there is a "driver add-on" that makes the i950 driver work in Vista.

Obtained the add-on. It requires that the "base driver" be installed (B3319MUX.EXE). When I run the driver's setup program, get "The Printer Driver Has Not Been Installed" message at the 60% completion point. Have tried the install in compatability mode and "run as administator" (Both XP and 2000), but get the same message. I am also logged in to an Administrator account.

Does anyone know of a way to get the base driver installed on Vista 64? Thank you.

A:Canon i950 Driver Will Not Install

Have you followed the instructions on installing the add-on module?

Canon i950 Printer Driver v 1.00 Add-on Module for Windows Vista - TechSpot Drivers

6 more replies
Answer Match 47.46%

I have two laptops and a desktop to which the laptops are wirelessly connected. All are running Vista 64 except the one laptop which is running Vista 32. The MP530 is USB connected to the desktop. I can print from the desktop just fine and, until a couple of days ago, I could print from both laptops. One laptop seems to trigger a failure of the driver to work on both the laptop and the desktop. If I restart the desktop the printer works fine until I try to print from the laptop. I have reinstalled the printer on the laptop and it prints a test page but nothing else. Any idea on how to cure this?

More replies
Answer Match 47.46%

my printer driver has somewhta been deleted of my computer and i need another one. Plz someone tell me where i can downloads a working windows xp driver for canon 5100 series printer.


A:BJC canon 5100 printer driver

7 more replies
Answer Match 47.46%

Hello, need help!

I have a Windows 7 64-bit PC. I have downloaded the S820 driver from Canon's site, but it keeps failing on me. The PC recognizes the printer, but as an USB device. It won't let me print to it. It only gives me 3 options when I right-click on the printer - Create Shortcut, Troubleshoot, Properties.

I was told the INFCache.1 file was causing issues with USB devices. I went and deleted that file, unplugged the USB plug, reinstalled the driver, plugged it back in. It recreated the INFCache.1 file and it tried to install the printer, but it failed.

I thought it was a compatibility issue, so I tried the XP driver, Vista driver, etc. and none of those worked.

I haven't worked with Windows 7 much, so Windows 7 gurus, please help out a n00b.

Gracias in advance.

A:Canon S820 Driver Issue

Bump, anyone?

2 more replies
Answer Match 47.46%

I've searched this online, but I haven't found a solution that works.

Basically, I have a Canoscan FB 320P Scanner, and no installation disk. I've downloaded the drivers from the Canon website, and a few other places. Anytime I try to scan anything, I get a common error message, that reads, "The parallel port may be used by another application 0x00060800"

I also have an HP Deskjet 695C connected with the scanner.

Then it tells me that it can't find the Twain source, to re-check the connection, and try again, but to no avail.

I want to get it so that at least the scanner shows up in the control panel under installed imaging devices. I tried going into the control panel, and adding a new imaging device. It always searches for an .inf file -- is that what I'm missing? Any suggestions would be appreciated.

Windows OS: XP SP2
Dell 3000 Pentium 4.

A:Help with Canon Scanner (Driver issues)

10 more replies
Answer Match 47.46%

I could not get for W7 x64 the WIA driver for a Canon PowerShot SD880 IS.
Any help?

A:WIA driver for Canon PowerShot SD880

Try here:

PowerShot SD880 IS Digital Camera

1 more replies
Answer Match 47.46%

I have an English Windows 7 Ultimate SP1 DVD. I have installed it, and after that I installed my own language (danish), and that went fine. I have allso learned how to make the start- and shut down screen in danish.

For my printer (Canon MG6150) I can only find a multilanguage driver, and allthough Canon support danish languane, I can only get it to show printer properties and maintenance in English. Anybody knowing a trick to make the driver install the driver so it will be in danish?


A:Canon driver only install in English?

Thank you. I did not know this with the ABOUT-button. You learn every day

1 more replies
Answer Match 47.46%

I bought this printer for a buck at a garage sale. They claimed it worked, but had no ink. I paid around twelve dollars for the ink cartridges on ebay, but forgot to check first to see if Canon had a driver for xp. They don't. However, when I go to microsoft's printer support page, I find that printer listed as one that there are drivers for in xp.

The question is--should I assume Microsoft is correct, or assume that my printer won't work and just get rid of it?


A:Question on driver for Canon printer (BJC-620)

I would go with the Win98 drivers they have listed on Canon's website. If microsoft has drivers for XP, try them first. The worst that can happen is that it won't work.

2 more replies
Answer Match 47.46%

Hi all, I'm currently having the Canon ip1600 printer and is unable to detect the printer (using Windows xp os). I manged to find a driver on Canon website, but when it comes to the installation part where they state that I'm supposed to plug in my printer and on it so that It can detect the port, it doesn't and it just stuck at the screen. I tired restarting com, offing and on the printer again, but everything won't works. Any help will be greatly appreciated. Thanks!

A:Canon Ip1600 Printer Driver

You appear to have a Canon PIXMA iP1600 printer.

Here is the Email support site for it.

Here is the phone support site for it.


1 more replies
Answer Match 47.46%

Does anyone know of a 32 bit driver for a Canon 9900F Scanner?

A:32 bit Driver for Canon 9900F Scanner

Quote: Originally Posted by Grizzledsourdou

Does anyone know of a 32 bit driver for a Canon 9900F Scanner?

Hi Grizzledsourdou , Welcome to the forums, Unfortunately there is no Win7 driver for your scanner , download the vista driver Canon CanoScan 9900F Scanner Driver Download | All Drivers ? Windows XP, Vista, 7, Sound, Printer, Scanner, USB, Laptop Drivers Easy Download and install in compatibility mode Compatibility Mode

2 more replies
Answer Match 47.46%

Is there any way to install printer driver (i have canon mp250 and i have its cd driver) without having the printer around?

A:Canon printer driver installation


This tutorial might help:

4 more replies
Answer Match 47.46%

Hi All,

This is my first post!

I am looking for drivers for Canon L170 Fax/Phone. I have contacted Canon and they said they didn't have anything that will work. I found a post on this forum that says a driver was found, but the post is closed and there is no link or reference to exactly what driver worked.

The thread is closed. The user that posted the question is Sauranan. The thread was closed on 12-May-2009. The title is "Canon L170 FaxPhone Driver Issue"

More replies
Answer Match 47.46%

I have recently bought a new base unit with Vista Home Premium 64bit installed. I have loaded all the software that came with my Canon 350D camera but Vista says it need to install new divers for a Canon Digital camera when I connect it via USB. It can not find any drivers on the install disc and recommends I install drivers for a "EOS KISS_N REBEL_XT 350D". I have checked the Canon website for the drivers and found no reference to the recommended drivers? I have found update for the software that came with the camera which I have applied but it still says it's found new hardware when I connect the camera.

The current versions of software installed are:
[IMG]file:///C:/Users/Personal/AppData/Local/Temp/moz-screenshot.jpg[/IMG]Digital Photo Professional ver
EOS Utility ver
ZoomBrowser EX

I have done a google search which brought up several sites none of which appear to work.
Can anyone point me in the right direction to get this working.

A:Canon 350D driver problem.

Hi Blakey,

I do not know if you have this one or not, but I found this at Canon:

1. Canon Camera USB WIA Driver for Windows Vista (6.0.0)

Operating system(s): Windows Vista 32bit
Language(s): English

It says it is not compatible with the x64 Vista or x64 XP though, only 32 bit versions.


12 more replies
Answer Match 47.46%

I purchased this computer on Sept. 2,2016 and I had the geek squad to transfer my files from my old computer to the new one now my canon imageclass 4150 will not print. I have tried several options to get the driver and it says driver unavailable. I don't
feel I should purchase a new driver. Any help with FREE download for this driver would be appreciated. thanks wvlpninwv

More replies
Answer Match 47.46%

I recently bought a new PC (O/S: Windows 7) and now it appears that there exists no 64 bit driver for my printer/scanner/fax Canon MF4690PL. Maybe I overlooked? Are there other solutions? Thanks!

A:Windows 7 x 64 driver for Canon MF4690PL

Try the Vista driver here:

2 more replies
Answer Match 47.46%

I have Windows 7 64-bit on my pc,I went to the Canon website and they have no drivers for the Canon 5000f scanner running
Windows 7 643-bit.
Is there another website where I can find the correct driver?

A:Driver for Canon 5000f Scanner

this says the driver is built into windows 7 or not needed

what happens when you connect the scanner - whats listed in device manager

have you installed any of the utilities that came with the scanner

whats on the included
CanoScan Setup CD-ROM

1 more replies
Answer Match 47.46%

I just upgraded my home network to a wireless system. I'm running XP Pro on the computer hardwired to the Canon Multipass F50. My laptop is running XP Home and networked via wireless. All aspects of the network operate perfectly, file sharing, internet access, etc. The add printer function allows me to find the canon over the network, I have the driver installed (because I've been using the printer in a networked (shared) mode prior to going with the wireless router. Now when I attempt to print I get an error message that states: "Failed to open printer" Canon's website simply states that there are no drivers for XP to allow for sharing this printer.

Wonderful!! Anyone have a workaround? It used to share until I went wireless.

A:XP printer driver for canon multipass f50

It almost sounds like there's a permission problem with using the printer with the laptop. Try going to the printer properties on the machine that the printer's connected to. Go to the Security tab and make sure that your laptop login computer name is there and all of the permissions in the ACL list are checked. You could also try going to Network Neighborhood, go to the computer that has the printer connected and try to connect to the printer through there.

1 more replies
Answer Match 47.46%


I'm new in this forum and like to ask, if someone have a solution for my driver problem.
I've got an old Canon S520 printer and i am not able to install any driver on my Windows 7 64bit.
I searched the inet for a solution, but can't find one.
And sorry, if my English isnt't that good.

Thanking you in advance.

A:Canon S520 printer driver

Support - Color Bubble Jet Printer - S520 - Canon USA Consumer Products

Use the Vista driver.

5 more replies
Answer Match 47.46%

After six working days of jumping through hoops, I have finally managed to install a brand new Canon LBP6650dn.

If anyone else is thinking of buying one in the UK, note that

(a) the supplied software disc is only compatible with Win 7 32bit

(b) Canon UK online and telephone support were basically no help and the drivers on the UK site do not work

(c) via a contact in Canon UK, I finally figured out the answer.

What you do is go to Canon U.S.A. : Consumer & Home Office : imageCLASS LBP6650dn
and follow the instructions.

This will install the printer as an "unspecified USB device".

Right click on that, run Windows troubleshooter, and when it tells you that the driver is missing, click on "Fix this problem".

Everything will then be sweetness and light - at least until you try to override the printer defaulting to single-sheet feed. But that's another story (which as yet has no end) ...

A:Canon LBP6650dn driver saga

Quote: Originally Posted by danfoto

What you do is go to Canon U.S.A. : Consumer & Home Office : imageCLASS LBP6650dn

Which driver do/did you use? There are 3 there and they all have this note...

Before starting the driver installation, connect only the LAN cable first, do not connect the USB cable at this time.
This is necessary for your printer to acquire IP address automatically before you start the driver installation and enable driver installer function.

7 more replies
Answer Match 47.46%

Microsoft tells me that the Canon Selphy CP730 photoprinter is Windows 8.1 compatible, but where do I get a driver? Canon don't have it and Microsoft don't have it. Regarding to Canon is the printer only Windows 7 compatble. I use Win 8.1 64 bit.


A:Canon Selphy CP730 driver?

This Canon page says Win8.1 drivers are NOT available for the printer:
Canon U.S.A. : Support & Drivers : SELPHY CP730

2 more replies
Answer Match 47.46%

I have changed my PC and need to re-instal my scanner driver. However I have mislaid my English disc and only have the German/Dutch one. I have downloaded the English driver tb4135-en and it is on my desktop. I am at a loss how to instal it and use it. Can anyone please help?

A:Canon LiDE 30 scanner driver.

What you need to do is download the latest ScanGear ("LiDE 30 Scanner Driver Ver.") software package.

The Windows XP driver that I downloaded for the Canon LiDE 30 is called lide20lide30n670un676un1240uvst7031a_xpen.exe. I don't see where you found the file called tb4135-en.

1 more replies
Answer Match 47.46%

Anyone aware of a fix so that windows 7 64 bit can install and use caroscan 5000f flatbed scanner?

A:canon carascan 5000f driver

I just checked here - Film and Negative Scanners - USB Flatbed Scanner - CanoScan 5000F - Canon USA Consumer Products and see there are no Windows 7 drivers for that scanner

You could try Vuescan from Hamrick if you don't find a suitable solution. The software allows you to use your scanner on a 64-bit OS through its program by providing its own 64-bit driver. It usually offers more options and tweaks over the standard software issued with the scanner. The downfall (if you want to call it that) is it will set you back $40.00 for the Standard edition or $80.00 for the Pro edition. There is a 30-day trial version as well.

List of supported scanners - VueScan Release Notes

1 more replies
Answer Match 47.46%

Hi folks,

Her indoors is not happy!!

I have converted her Lenovo laptop into a dual boot (XP/7 32-bit) - the intention being to get everything she uses onto 7 and "convert her" to 7 too

In XP she has been happily using her wireless connected Canon MG6150 and was comfortable with its scanner driver (Scangear).

In 7 I located the printer on the network and Win 7 got the driver for it. The "printer side" of the driver is fine but the "scanner side" is very minimal (it's a WIA rather than TWAIN) and she's not a happy bunny.

Should I remove this printer and start over, using Canon's own software? Bearing in mind that this printer is already wirelessly connected, what's the best procedure - install the software first from Canon's site and then connect the printer? If so, how do I stop it from searching Windows Update for a driver?



A:Driver for Canon MG6150 scanner

Just to let you know, I removed the printer, downloaded the Canon software and driver, re-installed and I have a happy wife now


2 more replies
Answer Match 47.46%

I have a Canon i9100 printer which worked great through XP, Vista and Win 7....Canon provided updated drivers.. However, for 8.1, Canon does not provide a driver for this printer. Is there another source which makes a generic driver for this printer so it does not become obsolete?

A:Solved: Canon Printer Driver For 8.1

The below image shows the list of compatible Windows versions for the Canon i9100 printer.

Unless Windows 8.1 provides a built-in generic driver for it, you're probably out of luck.

1 more replies
Answer Match 47.46%

I have a Canon Scanner "CanoScan N1220U" that I used on XP.

Looking to get it to work for W7 46-bit.

I tried the XP driver, and it says it successfully installed but, but then a pop up comes up and says:

LaunchAnywhere GUI has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify if a solution is available.

A:[need driver] Canon CanoScan N1220U

ok I got the driver to install and now the computer knows it is there.

But now Photoshop (CS4 64-bit) does not list the scanner when I go to file import
(like it did when I had XP and Photoshop 7)

I tried using the install disc that came with the computer, but it says it is not compatible with my OS.

I did install VueScan 8.5.37, but I have to scan in the program, save it, then open the file in photoshop. I'd rather just scan right inside photoshop.

9 more replies
Answer Match 47.46%

Recently purchased a new laptop. During installation of above printer I received a message that I should contact Microsoft for a new scanner driver for the printer. Have looked everywhere on Microsoft website without any luck in finding a driver for Windows Vista Home Basic operating system.

Can you help?


A:Canon Pixma MP 150 Printer Driver

Here is the correct web page for printer driver download

If you have any problems with regards to conflicts etc just come back to this same thread and most folk will be able to assist further.

1 more replies
Answer Match 47.46%

When I attempt to scan a document, the canon dr-2010c pulls it in half way then stops. It freezes and nothing else can be done. If I cancel and try again, an error message tells me the driver is busy. I have also gotten an error that the device cannot be locked and another program may be trying to use it. I do not have any other scanning software on the computer. Could this be a port problem? maybe the scanner is sharing a port with something else?? I have a HP deskjet and an Okidata printer installed, but they always work fine. I dont know what is causing this conflict. any ideas???

Thank you

More replies
Answer Match 47.46%

I can't seem to get my Canon to install correctly on W7 x64. I've tried running the installer as Admin, without UAC, and in compatibility mode.

Any ideas how to manually install the driver as I extracted the driver files but don't know how to apply them.


A:Canon MP780 driver install

Did you manage to start the mp navigator?

9 more replies
Answer Match 47.46%

I have a custom made computer Win 7 -Home Prem 64

My regular HP printer broke down (but was working wirelessly just fine)

So I want to substitute an old Canon Fax Phone L80 I have that worked OK on a Vista OS (another machine)

The system "found" the L80 as I plugged it directly into UBC

Says driver not found.......Win couldn't find one automatically and I have no disk

Manual downloaded a driver from Canon....I have no idea how the particular driver arrives and what file it is supposed to download to, maybe that's my problem,

Still can't find driver by hitting Add New printer.

Help file was incorrect, as to what tabs would appear when trying to manually download

So even though the L80 shows up in "Devices & printers" I can't get the driver driving!

What am I missing.........any ideas?

thanks in advance if you can give me a clue


A:Canon FaxPhone L80 driver won't connect

Hi Welcome to Seven Forums .. You problem would seem to be there is no 64 Bit Driver ..

1 more replies
Answer Match 47.04%

I have tried installing the driver from the Canon site but it doesn't work. Does anybody have a driver that works? Please let me know. Thanks!

A:Canon PowerShot SD100 driver for Win98

6 more replies
Answer Match 47.04%

I just purchased a Canon Pixma MP600 Printer & cannot Install the Drivers.

I received a error message "Process cannot continue because the Print Spooler service has been stopped. Restart the computer to start the Print Spooler & try again." while trying to install the MP600 Drivers. No Luck.

I have logged on to XP SP2 in SAFE MODE as the Administrator as specified in the set-up instructions. I am the sole user on the computer, but set up 2 user accounts at set-up. Where do I go now?

Thanks for your repaly,


A:Canon MP600 Install Driver Problem

7 more replies
Answer Match 47.04%

I have installed what canon says is a 64 bit driver suitable for win 7 but when I try to use the msoft built in scan and fax facility, I get an error message telling me I need a wia driver, whatever that is.

I have not been able to source one, so has anyone any ideas.

By the way, the canoscan program works perfectly with win 7 64 bit.


A:64 bit driver wanted for Canon 9950F scanner

Hi dogman, maybe this will help you Windows Image Acquisition (WIA) (Windows)

2 more replies
Answer Match 47.04%

lve been looking high and low for a printer drivers for the printer mentioned in the title..

while l have found a 32bit driver l cannot find a 64bit one and the installation program keeps on telling me when l try the 32bit driver lve found that its not for 64bit OSs, and all the compatable software l have located seems to be just that.. addon software for those who actually have the printer driver.. which isnt exactly helping wouldnt be an issue if l was running a 32bit system.

anyone know where l could pick up an actual driver for the canon IP1900 printer that works on a 64bit version of Win7, any help would be greatly appreciated as lve been looking to no avail for the last 3 hours.

A:Issue finding driver for Canon IP1900

Don't think you're going to find one. According to Canon,

FAQ: To use the product you are using in the Windows 7 environment

Answer :

< Applicable models>

iP Series

iP1900, iP2600, iP3600, iP4600
The software supporting Windows 7 for the above models and how to install them are shown below.

Printer Driver

To be included in the OS.
Connect the printer with the computer, and power ON; the driver will be installed.
To use some unavailable functions, download Add-On Module to install it.

My Printer
Solution Menu
Adobe RGB
Easy-PhotoPrint EX

Only thing is they doesn't specify if that applies to both 32 bit and 64 bit, or just 32 bit.

2 more replies
Answer Match 47.04%

Preciously I had my Canon i9100 installed on a windows XP machine and working well.
I have since updated to a windows 7 (64bit) machine and can't install the old driver from the CD. "The CD Rom cannot be used with the current operating system."
I am aware there is a patch which I have downloaded but it can't patch what is not there.
Please advise me of how to proceed.
note - Internet explorer only comes up with blank screen when a search is performed.

More replies
Answer Match 47.04%

My printer is physically hooked up to one computer and works
fine, however, I want to share this printer on my home network. I
enabled File and Printer Sharing and set the option to share my printer.
I go to my other computers and find the printer and I am then given a
message that the server doesn't have the correct driver installed. I
then place the driver CD in this same computer and select the file it
was looking for (autorun.inf). Once the file copying progress has been
completed, I get an error stating "Printer driver setup error. Operation
could not be completed." As far as I know, I am not doing anything
wrong. Any help would be much appreciated.

A:Canon iP4300 Driver Install Issue?

Can someone please help me? I REALLY need it

1 more replies
Answer Match 47.04%

I recently bought the supposedly excellent Canon MP530 multi-function printer,etc. and went to install it on my WinXP pro machine and . . . nothing. I've spent some time with Canon tech support (some helpful, some not so helpful) but I still can't get the freakin' things to communicate with each other. The consistent result of my installations is "no driver is installed" or "cannot find driver" - even though the driver itself seems to install. Also, when I turn the printer on, I get the New Hardware Wizard, which, I think, means my computer is detecting the printer. It's as if the driver is just not recognized by my computer.
I've installed (and uninstalled) the drivers from both the disc that came with the printer and from the Canon website. I've used two different USB cables. I've tried many combinations of plugging/unplugging, starting/restarting, turning on/off - all to no avail.
I've logged on as the Administrator. I've done my best to shut down any programs or processes- though I think this is tricky, as I don't necessarily know what each thing in my Startup or Services is. I've even tried installing from SafeMode. I've tried using the New Hardware Wizard; I've tried ignoring the New Hardware Wizard. I've received a few error messages, but only when attempting the full installation from the disc. The messages are: "AddPrinterDriverEx Error:2", "AddPrinter Error:1797&... Read more

A:WinXP Canon MP530 driver problem

16 more replies
Answer Match 47.04%

I have lost my disc for my Canon PowerShot SD100 camera. I tried to install a driver but it doesn't work. I can't get the images off the camera. Does anybody have a driver that actually works right. Let me know! Thanks!

More replies
Answer Match 47.04%

I'm looking for a windows 7 driver fro a cannon D660U scanner, but alas, canon does not have one. The computer is running win7 home so XP mode is not an option. Is there another work-around?

A:Windows 7 driver for a Canon D660U scanner

It would be worth trying the Vista 32bit version driver for it. Worse case scenario is it won't work.

1 more replies