Tech Problem Aggregator

Control C and control v shortcuts aren't working

Q: Control C and control v shortcuts aren't working

I recently discovered the shortcut keys for copy and paste, cntrl c & cntl v, do not work for certain programs. For example, if I have a picture using Windows Photo Gallery (or Paint) and I hit cntrl c and try to paste it in an email, cntrl v, nothing happens. I can, however, copy the same picture into a Microsoft Word document. I can also do a cntrl-alt-delete sequence and it brings up a task manager window.

I cannot copy the same image from Microsoft Word into an email page. It also does not work when I right click on the picture and hit the paste or copy feature.

I use AOL for my mail and Firefox for my browser.

Thanks in advance.

A: Control C and control v shortcuts aren't working

Does it work if you do Ctrl - A first? (that's the select all command)

3 more replies
Answer Match 90.72%

Yesterday two keyboard shortcuts that I use constantly quit working - Alt+Tab to switch between windows and Control+Click to open a link in a new tab in Internet Explorer. The only change was the download and installation of Turbotax Home & Business - in fact, the first I noticed the problem was while the installation was taking place. I searched the Internet and found one older post on this site that addressed the Alt+Tab problem, but I did not see a resolution. I checked my Registry and the "coolswitch" settings are where they should be. I called Turbotax, but they were of NO help. Not positive it is related to that installation, but very suspicious. I have a Microsoft wireless keyboard and mouse. Can anyone help? Thanks.
 

A:Alt+Tab, Control+Click keyboard shortcuts quit working

You might try uninstalling your keyboard driver and reinstalling it.
 

3 more replies
Answer Match 81.48%

For the past few months, I've had problems with some of my "security" shortcuts. It started when I tried to open AVG and run a scan. When I click on the icon, I get a pop up stating the "program.exe" associated with the icon has changed or moved and do I want to delete the icon. I noticed that I had an AVG update come in prior to this problem so I figured it was an AVG problem and I have been working with their customer support people to try and fix it. I've also noticed that other "security" programs have the same problem. When I click on "malwarebytes" and "whatsrunning", I get the same box. I just downloaded superantispyware and tried to run it, but had the same problem with the desktop icon. I have Spyware Terminator, and its working fine. I haven't found any other programs that are having the same issues.
The tech I've been working with at AVG has had me run uninstall and other programs trying to find the issue but we've gotten nowhere. I can't open AVG to run a scan, (I get the error box noted above), but when I go to my Security Center, it shows that "AVG reports up to date and active". I haven't been able to reinstall AVG because of an error with a program in Firefox called Chrome. I just need some advice on how to fix the problem with the missing or moved programs so my shortcuts will work. I don't believe its a virus, I've used Spy Terminator numerous times ... Read more

A:Some shortcuts aren't working....

"Chrome" is a Google browserhttp://www.google.com/chrome/index.html?hl...p;utm_medium=ha

6 more replies
Answer Match 79.8%

I can't use my Control with any other key to copy, cut, paste, or
bring up task manager.

Help please and thanks, Mary

Here is my hijackthis text file.
 

A:Control/C Control/V control/alter/delete doesn't work

Mary, keyboard problems are not invariably software or malware-related. First things first - what OS are you talking about ? XP, Win 7, Win 8 or what? What type of keyboard is it? PS2, USB or wireless?

Disconnect it and reconnect it a few times, reboot and try again. Turn the keyboard upside down, placing one end on the edge of a thick book, and thump a few times on the back with your hand. Sweep the crud onto the carpet.....

Is it just a keyboard hardware problem, and if so which keys? http://windows.microsoft.com/en-gb/windows/keyboard-shortcuts#keyboard-shortcuts=windows-7 tells you a lot of key combinations with ctrl and shift and alt. Tell us if any or none work?

Open a document and try typing a bit of text. Do all the characters work?

If it appears the keyboard is faulty, can you borrow another to test?

Quite often, keyboard problems are down to wireless problems: and can often be solved by re-installing the keyboard driver.
 

2 more replies
Answer Match 76.86%

Hello, I have moved the administrative tools folder in the start menu, causing the shortcut in the control panel to fail. How can I make a change so that it points to the new location?

A:Control Panel Shortcuts

Hi, welcome to the forums

Firstly, why would you move it from it's default location in the first place?

7 more replies
Answer Match 76.02%

On Windows XP, I've assigned a bunch of shortcuts, and stored them in a start menu/programs/shortcuts folder.

One opens Remote Desktop Connection. But if a Remote Desktop Connection session is already open, running the shortcut won't open a new session - it'll switch the active window to the currently open session.

I have another shortcut pointing to a folder of servers. If I have Windows Explorer open to any other folder, when I press the shortcut keys for my servers folder, my active window will, again, switch to the already opened folder, and not bring up my servers folder.

Is there a way to open the folder the shortcut was originally assigned to?

Thanks.
 

More replies
Answer Match 76.02%

Hi,

In the last few months I have been unable to adjust my speaker volume by using the keyboard shortcut buttons, ( fn + F10; fn + F11; fn + F12).
Is there a way I can fix this?
Thanks.

A:No Control of sound via keyboard shortcuts

Are all your drivers up to date?

5 more replies
Answer Match 76.02%

Okay, dont ask why lol, but I am wanting to remove the sub menu shortcuts from the "Network Connections" tab I am wanting to "hide" them as I know this is all you can really do, but I have tried "hiding" them both "the CPL icons under wizard with no avail" is there any other ways of hiding these two shortcuts so they do not show up under the "Network Connections" or a program that can remove them?

Any help would be greatly appreciated.
 

A:Help With Removing Control Panel ShortCuts.

6 more replies
Answer Match 76.02%

I would like to have a shortcut on my desktop that goes straight to the uninstall a program area of the control panel.

A:How do I make shortcuts to control panel?

Hello microbillgates.

This Tutorial should help you to do what you want.
Programs and Features - Create Shortcut - Windows 7 Forums

5 more replies
Answer Match 75.18%

Does anybody have explanation or solution for the following phenomenon. Usually I create shortcuts to Desktop to those items of Control Panel that I use most often (Device Manager, System, Display, Sound, etc..etc...). I do it so that I press shift and ctrl down and then drag-drop the items from control panel to desktop.

Makes your life much faster especially when you install windows.

I think the shortcuts usually disappear when you reboot the machine or install something new into it.

Any good ideas?

A:Control panel shortcuts disappearing from desktop...?

Try this. In control panel pick with a right click lets say folders. The option should be there to create a desktop icon. On my system it stays there after reboot. Right clicking is your friend.

1 more replies
Answer Match 75.18%

Always dragged a copy of Computer and Control Panel icons to the taskbar at the bottom in Vista. 7 doesn't seem to let you do that. It just says pinned but they aren't there. Also notice that some of the programs I have reinstalled after installing 7 at the ned ask if you want to add a shortcut to the desktop or quick launch taskbar then don't appear there either.

A:Computer or Control Panel shortcuts on taskbar

Pinning Control Panel is easy. Open up the Control Panel, right click on it's icon on the taskbar-Pin to taskbar.

Others..

Computer - Pin to Taskbar
Windows Explorer Taskbar Icon - Change Open To Target
Quick Launch - Enable or Disable

2 more replies
Answer Match 75.18%

Hi,
On Windows XP, I've assigned a bunch of shortcuts, and stored them in the start menu/programs area.

For one that opens Remote Desktop Connection,
if a Remote Desktop Connection session is already open, running the shortcut won't open a new session - it'll open the current session.

Same thing happens for a shortcut to my servers folder. Even if I have Windows Explorer open to any other folder than the servers folder, when I press Control-ALT-S (for servers), I will get the already opened folder, not my servers folder.

Is there a way to correct this behavior?

Thanks.
 

A:Solved: Control-ALT shortcuts don't always work as expected

Wong forum! Other forums hidden (had to scroll down a page). Apologies where needed.
 

1 more replies
Answer Match 74.34%

Hello,

Three days ago I thought I had downloaded a virus. When Windows started up, a DOS window would pop up and then shortly thereafter internet explorer would open up and take me to a page with a counter but nothing else. I ran Norton and thought i had it taken care of but the window kept popping up. I noticed that the name of the DOS window said "h0st.exe" so in my ignorance I did a search for that file and once i found it I opened the properties and chaged the "opens with" to microsoft wordpad thinking (ignorantly) that the virus would now be rendered useless and would only open up a harmless wordpad file.
Imagine my surprise when I double clicked on my desktop shortcuts and they all opened with wordpad. All my programs in the startup menu do the same thing, along with "cmd" under the RUN window and many other things. For example if I right click on my desktop and click properties a wordpad file pops up titled "rundll.32-wordpad". I tried running my windows xp home cd to repair and nothing. I can open up all my programs with no problem but I have to right click on them and choose "run as" then click on the "current user" circle but I have to uncheck the "protect this computer..." box.
So basically wordpad opens everything in my computer i cant access my controlpanel options like desktop appearance, or even defrag and system restore...worpad files pop up. Please please help me. I dont know what I did ... Read more

A:Programs, Shortcuts, cmd, and control panel all open with wordpad.

Try These

CPL File Association Fix (Restore the default associations for CPL files)
LNK (Shortcut) File Association Fix (Restores Default Shortcut Behavior)
EXE File Association Fix (Restore default association for EXE files)

http://www.dougknox.com/
 

2 more replies
Answer Match 74.34%

Running win xp home, 'my documents' folder (or any other shortcut)on desktop wont open. I see the frame of the window, then the desktop disappears, then comes back to normal, but no window open. I tried to do a system restore, but the control panel wont open from the start menu. I get the same effect whenever I try to open 'my computer' and some others, but the task bar shortcuts work fine (outlook, firefox, virus scanner)
WHAT TO DO!
 

More replies
Answer Match 74.34%

How can I remove unwanted shortcuts in control panel in Vista?
I will try to reply asp!
 

A:How can I remove unwanted shortcuts in control panel in Vista?

Hi!
You could download yamicsoft Vista Manager and select: SECURITY> CONTROL PANEL
then select the shortcut and click delete Button on bottom of window.

I would be careful though. there is no recreate option in vista or vista manager that i know of.
I assume that you must be wanting to remove an aplett installed by a program you no longer want to use? otherwise i would leave it alone.
 

11 more replies
Answer Match 74.34%

I like creating shortcuts from items on the control panel, like Windows Firewall, Windows Update and so on, and i like to use launcher programs like Executor to launch these shortcuts. But after upgrading from Windows 7 Ultmate 32 bit to 64 bit these launcher programs can't launch the shortcuts anymore. Also bat or autohotkey scripts can't launch these shortcuts too. Any idea why?

A:Problem with launching control panel items shortcuts

Have you tried just drag and drop something from Control Panel to Desktop or right tick on something in Control Panel and select Create a Shortcut.

3 more replies
Answer Match 72.66%

"Topic Title" cont'd:  Document Shortcuts Show Up on Desktop Randomly, Windows Pop Up Randomly, and System Tray Changes Positions
 
Hi,
I am working on my 65 year old neighbor's computer.  She has called me in a panic over many months complaining of the issues I described in the Topic Title, but I had never witnessed them occurring since they are sporadic. 
 
I had installed and run MSE on her computer and never found anything.  I also recently tried rkill and then ran MSE again.  Still nothing; however, yesterday I came over to help her with some other work and sat down to do something at her computer.  While I was trying to use her computer I was able to witness first-hand the issues she had been describing, and I thought, "UH-OH!"  Something is definitely W.R.O.N.G. with this computer. 
 
First, She had her shortcut to AOL Desktop 9.7 open.  That is how she accesses her email and internet.  I do not like that interface, but I tried to use it to access the Windows updates for her computer.  It would neither close nor allow me to type anything anywhere.  Finally it began opening up five IE windows.  Then those were frozen.  Blech.  I couldn't get them to close with clicking on the "X" or going to the system tray and closing OR using the Task Manager to terminate the process!
 
Sure enough, suddenly the mouse began darting and jumping and moving about as though it was possessed.... Read more

A:XP Pro Freezing, Mouse Out of User Control, Document Shortcuts Show Up On Deskto

I forgot to add that I am unable to minimize browser window by clicking on the _ button.  When you can actually get the computer to respond you have to use the system tray as a way to minimize the window.

10 more replies
Answer Match 69.72%

The ultra-sensitivity of my Dell laptop trackpad has driven me mad. How to reduce the sensitivity. I read forum advice that said go to control panel,mouse, and there will be a trak pad sensitivity adjustment. But..there was no adjustments for track pad on the mouse section. anyone know where it is??

Thank you!

More replies
Answer Match 69.72%

Hello :)
I hope I put this in the right area..

I've been searching for a solution to this volume problem for a while now, but to no avail. I've found others with a similar problem, but no solution. So here's the deal: I just got a new motherboard, and ever since I got it my volume control has been faulty. First of all, all sounds are very quiet, even when all volume sliders are set to maximum. Next the main volme control has no effect whatsoever on the volume of the computer. I can can slide it all the way to the top, or all the way to the bottom, nothing changes. The only thing that makes any difference is the Wave control and it barely does anything. Also, when I put "Mute all"...it doesn't mute. However when I put mute for Wave control, no sound comes out.
All this is incredibly annoying because I often listen to music on my computer, but now I basically can't hear it. To note: I don't have a volume control on my keyboard, or on my speakers, and I know nothing is wrong with the speakers.

If anyone could help, I would really, really appreciate it. Thanks :)

A:Volume control issue-very quiet, main control uneffective

Are your speakers powered? If not you may have to invest in powered
speakers. This is a common issue with non powered speakers.

4 more replies
Answer Match 68.88%

my laptop brightness control control system software is not working so please tell me a link to download a new brightness control software HP G62windows 764 bit 

A:my laptop brightness control control system software is not ...

my lenevo laptop is brightness not working.please solotion me.

2 more replies
Answer Match 68.88%

Hi all,

Access 2003 with VBA code time again!

I have a form named "MyForm" with a single tab control on it named "MyTabCtl1".

The Tab Control holds three pages: "Tab_Page_1", "Tab_Page_2" and "Tab_Page_3" and each page has a number of bound controls on it.

Now, on "Tab_Page_3" I have an unbound control called "Descriptor_00"

I wish to create code that, on loading the form, will set the ".text" or ".value" property of "Descriptor_00" to be a combined string derived from other controls on the same and other pages.

On a standard form, I'd use something like:

Me!MyControl.Value = Me![First Control] & ", " & Me![Second Control] & (etc)

to build my combined string.

But, how would I do this for a control on a page of a tabbed control ? What's the syntax cuz I'me puzzled!!

Does this make any sense?

All the best

Chris
 

A:Solved: Ho to refer to a control on a page on tab control - MS Access

6 more replies
Answer Match 68.88%

I'm running windows XP on an old Dell Inspiron 1501 and I'm trying to get my microphone to play directly through my speakers so I can record them both simultaneously. The only answer I've been finding is to tick the 'microphone' checkbox in the volume control playback properties panel, but I don't have a microphone checkbox.There should be a 'microphone' box under SW Synth and CD player but I don't get one apparently.I've downloaded the latest SigmaTel Audio drivers from Dell and despite not having a problem with them before this, I'm inclined to believe that they're the problem. Any ideas?

A:No microphone control in playback Volume Control panel

Okay well of course I find an answer right after posting the topic:
http://en.community.dell.com/support-forums/laptop/f/3517/t/19295458.aspx
http://en.community.dell.com/support-forums/laptop/f/3517/p/18112824/18235810.aspx#18235810

Those two pages detail how to get an Input Monitor checkbox which functions just like the microphone one I wanted (although you can only mute it, not alter the volume). I used Instructional Set 3 from the second page, having to add the 'RecMonitorMute' entry as detailed in the first page and I can now hear my microphone input directly through my speakers.

HOWEVER, I'm still unable to record both the microphone and speaker sound at the same time. I thought recording the 'Stereo Mix' channel with the microphone coming through the speakers would work but it isn't and I don't know why. Any ideas?

1 more replies
Answer Match 68.88%

I'm running Windows 8.1 64bits.
 
I have noticed since a couple of days ago that my Control+Tab shortcut does not work anymore. Not on text editors, not on web browsers, not on property pages, nowhere.
 
Control+Shift+Tab (reverse tab navigation) still works.
 
I have checked the results on an application called "Ethervane ActiveHotkeys". In there, it states that Control+Shift+Tab is not an active hotkey but that Control+Tab IS. I assume that some application decided to globally pick up Control+Tab for itself.
 
I have tried restarting (and testing as quickly as possible before all programs load), I have tried closing down all applications that the task manager will let me and still the shortcut does not work.
 
I tried going to msconfig and disabling all programs and non-Microsoft services with no luck, but if I start Windows 8 in Safe Mode then Control+Tab works again.
 
I tried running Hotkey Commander; it shows Control+Tab as being bound by some application, but does not show which application it is. If I delete/disable the hotkey binding from inside Hotkey Commander then it works again until I restart.
 
 
I'm stumped as to how to troubleshoot this further and any help would be appreciated. Thanks.

A:Control+Tab does not work anywhere anymore (Control+Shift+Tab still works)

I'm having the same problem as of today, and basically mirrored your findings.  The only thing I can think of that changed in the last 24 hours was the nVidia drivers and Geforce experience..

5 more replies
Answer Match 68.88%

Hi
I've been searching for a solution to this volume problem for a while now, but to no avail. I've found others with a similar problem, but no solution. So here's the deal: I just got a new motherboard, and ever since I got it my volume control has been faulty. First of all, all sounds are very quiet, even when all volume sliders are set to maximum. Next the main volme control has no effect whatsoever on the volume of the computer. I can can slide it all the way to the top, or all the way to the bottom, nothing changes. The only thing that makes any difference is the Wave control and it barely does anything. Also, when I put "Mute all"...it doesn't mute. However when I put mute for Wave control, no sound comes out.
All this is incredibly annoying because I often listen to music on my computer, but now I basically can't hear it. To note: I don't have a volume control on my keyboard, or on my speakers, and I know nothing is wrong with the speakers.

If anyone could help, I would really, really appreciate it. Thanks
 

A:Help with volume control-very quiet, main control unnefective

Do you have any other soundcard-like devices like a USB headset?
Do you have the latest drivers for your soundcard installed? Please check the motherboard maker's website.
Did you get some special program with the motherboard drivers that would give you more control over sound than the Windows standard volume utility?
 

1 more replies
Answer Match 67.62%

Hey, hopefully this is the right place. I can't open control panel from the button on the start menu ( problem with associated files or something ) and once ive opened it, some things wont work.
I can't open themes/screensavers etc, it comes up with an error saying it cannot find control.exe

here's the hijack this log, not sure what else i need to do - any help would be great

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 17:21:54, on 13/11/2008
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18000)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskeng.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\Windows Defender\MSASCui.exe
C:\Windows\RtHDVCpl.exe
C:\Program Files\TOSHIBA\Power Saver\TPwrMain.exe
C:\Program Files\TOSHIBA\SmoothView\SmoothView.exe
C:\Program Files\TOSHIBA\FlashCards\TCrdMain.exe
C:\Program Files\TOSHIBA\ConfigFree\NDSTray.exe
C:\Program Files\PowerISO\PWRISOVM.EXE
E:\Office12\GrooveMonitor.exe
C:\Program Files\AVG\AVG8\avgtray.exe
C:\Windows\System32\igfxtray.exe
C:\Windows\System32\hkcmd.exe
C:\Windows\System32\igfxpers.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\BillP Studios\WinPatrol\WinPatrol.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\Windows Sidebar\sidebar.exe
C:\Program Files\TOSHIBA\TOSCDSPD\TOSCDSPD.exe
C:\Windows\ehome\ehtray.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.... Read more

A:Control Panel Problems - Cannot find control.exe

Hello, owain182
Welcome to TSF

My name is Billy O'Neal and I will be helping you. (Billy or Bill is fine, if you like.)
Please give me some time to look over your computer's log(s).
Please take note of the following:In the meantime, please refrain from making any changes to your computer.
Also, even if things appear to be running better, there is no guarantee that everything is finished. Please continue to check this forum post in order to ensure we get your system completely clean. We do not want to clean you part-way up, only to have the system re-infect itself. :)
If you do not understand any step(s) provided, please do not hesitate to ask before continuing. I would much rather clarify instructions or explain them differently than have something important broken.
Finally, please reply using the button in the lower left hand corner of your screen.
Old topics are closed after 3 days with no reply, and working topics are closed after 5 days. If for any reason you cannot complete instructions within that time, that's fine, just put a post here so that I know you're still here. We get a lot of people who simply leave, and if there is no contact for that amount of time I will have to assume you have "vanished" .
We need to run a Scan with DDSPlease download DDS, and save it to your desktop, from one of the following mirrors:This is a mirror
This is another mirror

Disable any type of "Script Blockers" or "Script Protection" installed on your... Read more

2 more replies
Answer Match 67.62%

Hi Guys, can you please take a look at my hijack log and please tell me if something has taken over my computer. I am running windows xp sp2 and for some reason the alert sound goes off on my computer and I loose mouse control and keyboard control. I have taken all of the recommended steps of the forum. Can you please take a look at my hijack this log and tell me if you see anything?

A:Mouse Control And Keyboard Control Loss

Hi Murpg,Sorry for the delay, this forum is swamped right now.Because it has been quite a while, I need to see a fresh HijackThis log. Before you run the new HijackThis scan I want you to replace your old version of the program with a new one. Please delete the version currently on your computer, then click here and download the new version to your desktop.To use HijackThis, double-click on the icon. When it runs it will prompt you to extract hijackthis.exe to C:\Program Files\Trend Micro\HijackThis. If you would like to extract it to another location you can change the directory. When it is done installing, HijackThis will automatically launch. When the license agreement appears, select I accept and then click on the Do a system scan only button. When the scan is complete, click on the Save Log button to create a log of your information. When you post the new log, please post it directly in the body of your reply, rather than attaching the file.Dave

1 more replies
Answer Match 67.62%

Thanks for reading this. Boy, do I need help.

Somehow I got my permissions all messed up. I can't access some folders. I have worked a lot trying to use properties-security tab and playing around, and I can sometimes change permissions so I can use a folder. But I am trying to open "Documents and Settings" and it will not let me change permissions on it and I can't get into it. I think I could before this mess started.
When I start up, instead of one account (jim) which had administrative privileges, now I have two, Administrators and jim. I always had all permissions with jim, but somehow it's messed up now.
Why can't I have complete control over my own computer as jim? Nobody else will ever use it, it's in my office. But Windows keeps stopping me over permissions, or the message "Access denied."

Anyway, so I logged out as administrator jim and logged in as Administrator. Now I don't even see the folder Documents and Settings.

How can I once and for all get complete control over my computer so I can open or delete any folder or file?

Thanks so much for any help, it's making me pull my hair out.

Jim

A:I've lost control of permissions, how can get get control back?

There is no "Documents and Settings" for Win7, unless perhaps you've un-checked "hide protected operating system files". This "Documents and Settings" folder name is an XP concept, which for Win7 is really part of \Users.

If you open Explorer, and select on the "Organize" item on the menu bar, then "Folder and search options" from the dropdown list, and then View tab, you can CHECK that "hide protected operating system files (recommended)". That's a good thing. And it will also automatically prevent you from trying to access hidden system files that you have no business trying to access by that name since they're now invisible and cannot even be seen. They will instead appear with their proper folder names in Explorer, and you shouldn't be denied access to these properly named folders.

And while there, up a bit in the "hidden files and folders" item you should UN-CHECK the "show hidden files, folders and drives" item. That will let you see your \Users\<userid>\Appdata folder, where much is kept for each user... and you certainly should see \Users\Jim.

Underneath \Users\Jim you should also see \My Documents, \My Music, \My Pictures, etc., which is where your data (for Jim) would normally be saved unless you put it somewhere else.

1 more replies
Answer Match 67.62%

Hello,

I downloaded and installed sphinx FREE Vista Firewall Control version for Vista Firewall. This apparantly enabled outgoing traffic blocking in Vista Firewall

However, COMDODO used to warn me about some stuff connecting when Vista booted, e.g MS Media Centre wanting to connect to internet etc.

But Vista Firewall Control doesn't warn me about these outgoing connections. Anyone know why?

The FREE version doesn't support System/Core application protection. What does that mean exactly? Is that why it doesnt warn me about media centre etc?

More replies
Answer Match 67.62%

Hello!
I got myself an Audio-Technica AT2020USB+ condenser microphone a few weeks ago, and I haven't really found out how I can change the gain, which I hear is important to do.
There is only one slider where the gain slider also should have been. The mic doesn't have a gain know like some other microphones have.



As you can see there is one slider. It only changes volume as far as I know.

How can I change the gain, is it needed, or can I maybe control gain using the volume slider?
If I can't change it directly through the mic or through the control panel, how can I change it? D:

Thanks in advance!

A:Can't control gain! No slider in control panel!

I have a recording studio (Sonar X3) and use several AT mics but they are not USB mics (such as the AT2035 and AT2050).

"Volume level" is the same as "gain". You can adjust the "Volume Level" or you can adjust the "gain" - both are the same thing. On mixers, amplifiers, etc, some will call the volume control "level" and others "gain".

A USB mic should have its own listing in the Sound/Recording Panel. Whatever slider that is has, such as what you show, should adjust the volume level. Many recording programs also have volume level adjustments.

2 more replies
Answer Match 66.78%

Hello, after inserting a pendrive I've contaminated my personal computer with a virus that: 1) Transform all files and folder of the pendrive in hiden and create shortcuts2) Remove the Control Panel itens3) Blocks my access to all my files/programs/folders (system says that I've no permission to use/work in all the folder and all the programs)4) It's a JS type os virus because there are JS stuff in the Start menu item.5) The virus also deactivates Avira completely. The program starts but when I click it's icon it just closes. Also avira did detect the virus in the pendrive but it was too late. After a lot of work following instructions here I believe I've succesffuly cleaned my system, but I would like to confirm. I'm posting the DDS log. thanksDDS (Ver_2012-11-20.01) - NTFS_AMD64Internet Explorer: 10.0.9200.16537 BrowserJavaVersion: 10.21.2Run by Fernando at 14:30:56 on 2013-05-13Microsoft Windows 7 Ultimate 6.1.7601.1.1252.55.1033.18.8108.4048 [GMT -3:00].AV: Bitdefender Antivirus *Enabled/Updated* {9B5F5313-CAF9-DD97-C460-E778420237B4}SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}SP: Bitdefender Antispyware *Enabled/Updated* {203EB2F7-ECC3-D219-FED0-DC0A39857D09}.============== Running Processes ===============.C:\Windows\system32\lsm.exeC:\Windows\system32\svchost.exe -k DcomLaunchC:\Windows\system32\svchost.exe -k RPCSSC:\Windows\system32\atiesrxx.exeC:\Windows\System32\svchost.exe -k LocalServiceNetworkRestrictedC:\Windows\Syste... Read more

A:USB shortcuts + Remove access to all files + Remove Control Panel + JS virus

Greetings gauchotche and to BleepingComputer's Virus/Trojan/Spyware/Malware Removal forum.My name is Oh My! and I am here to help you! Now that we are "friends" please call me Gary.If you would allow me to call you by your first name I would prefer to do that. ===================================================Ground Rules:First, I would like to inform you that most of us here at Bleeping Computer offer our expert assistance out of the goodness of our hearts. Please try to match our commitment to you with your patience toward us. If this was easy we would never have met. Please do not run any tools or take any steps other than those I will provide for you while we work on your computer together. I need to be certain about the state of your computer in order to provide appropriate and effective steps for you to take. Most often "well intentioned" (and usually panic driven!) independent efforts can make things much worse for both of us. If at any point you would prefer to take your own steps please let me know, I will not be offended. I would be happy to focus on the many others who are waiting in line for assistance.Please perform all steps in the order they are listed in each set of instructions. Some steps may be a bit complicated. If things are not clear, be sure to stop and let me know. We need to work on this together with confidence.Please copy and paste all logs into your post unless directed otherwise. Please do not re-run any programs I suggest. If you encounter pro... Read more

19 more replies
Answer Match 65.1%

Help! I have a Windows XP computer that has been infected by the Net Control trojan and it is blocking my every move to remove it. Upon boot up I get a System Restore window notifcation that says "Remote administrator Adam1 has changed some Windows OS system files. Checking will will take several minutes. Do not turn off computer - it can lead to a crash. Current scan: C:Windows\System32\zipfldr.dll . Then it it gives a list of system files restored. They are all System32 files with names like acledit.dll, aclui.dll B57exp.cpl, etc. This happens even if I boot in Safe Mode. Once Windows starts, I usually have 2 or 3 minutes before a Network Control popup window appears with the Windows Security Center Shield Logo: Remote Login Request. Don't allow access unless you clearly understand what you are doing. Your computer received a remote login request by user Adam1 from the IP 88.242.162.244. There are two buttons: Deny access or Allow access. I am unable to close the window without responding to either button. Denying access results in a message: "Error found, Cannot perform the requested operation. Your license for Network Control has expired. There is a Renew button. If I don't do anything the window times out and freezes the computer. In fact any attempt to get out of this thing freezes the computer.

I have tried deleting registry entries following manual removal instructions I found on the internet. These reappear when I reboot. I cannot unregister the ... Read more

More replies
Answer Match 65.1%

hxxp:// 98exe.net/Soft/ShowSoftDown.asp?UrlID=1&SoftID=1984[/url]i dont know how to to know my pc be controled, the Remote PC control can passby theAntiVirus,Mod Edit: Disabled active link(s) as it links to downloading an unfamiliar file.

A:wow,Sx 2013 Remote PC control, just know ur ip ,can control ur pc

Are you asking a question about whether or not your computer has been remotely controlled, whether there is a product which can remotely control it (bypassing your anti-virus) or something else?

1 more replies
Answer Match 65.1%

The network I maintain at a school has policy restrictions which do not allow users access to the printer controls. However I would like them to have the ability to control their own print jobs and unpause printers etc. But when editing the policy I find that they get access to control panel at the same time and can do lots of possible damage.

Can I do this any way while minimising possible damage? We are running an NT4 network with some 95 and some NT workstations.

many thanks

Tony
 

More replies
Answer Match 65.1%

Ok I have upgraded to window 10 and ever since my "Control + C" will not copy to the clip board. If I use "control + ins" it works fine. I thought it maybe the wireless keyboard so I hooked up a USB keyboard and still have the
same issue. Is there a way to control this in window 10 were it can be turned on and off? I cant find a setting for this.

More replies
Answer Match 65.1%

Control P to print not working. I have created another Administrator Account and tried to use Control P from that one as well. It didn't work either. Please Help

A:Control P not working

@Tricia1964                                                           Welcome to HP Forums, this is a great place to get support, find answers and tips,Thank you for posting your query, I'll be more than glad to help you out. As I understand the keys, CTRL + P isn't working, though you have created an administrator account to use it and here's what I need to provide an accurate solution: Are you using it to print something? in which case could you tell me which application you are using to print?When was the last time it worked?did you check if the Letter P or the CTRL key works individually using either notepad or the command prompt (find it on your windows search bar)? Eagerly waiting for your response!Regards,

1 more replies
Answer Match 64.68%

I inherited a Dell XP420 Computer with Vista Operating System from my stepson Pat who could never figure out the machine.

I seem to have many problems with Vista revolving around User Account Control, Privileges, Permissions, Ownership, user names, file control and directory structure. etc.

I?ve been working around UAC problems, but there has to be a way out of this. My most recent issue:

IE has problems fully loading web pages. With IE, like several programs that I run with this computer I get messages that say I have corrupt files. I get object error warnings Chkdsk does not fix problems.

While shopping for a new car battery, with many pages open, the computer completely hung up last night. I had to kill power and reboot.

IE7 did not work, I Unloaded and IE7 would not work also. Google Chrome is fine, I have internet access. I reset all defaults.

After hours of messing around, I discovered the way to start IE is ?Run as Administrator?
Then like so many other programs I run, I get the screen Windows screen
? A Program needs your permission to continue.?

When I dumped my old files on this XP420 computer from my old computer, They resided in User ?Mike_W_old.? I had no permissions with this user, so I moved all the files to ?Pat? I renamed user/administrator Pat to Mike _W under the desktop, but the user pat did not update under the OS C:\ drive \ Users\ Pat and there is no option to rename here.

Pat was the original administrator. Vista is tel... Read more

A:User Account Control, Privileges, Permissions, Ownership, user names, file control an

Hello, did you use the Easy Transfer method ? Transfer files and settings from another computer

3 more replies
Answer Match 64.26%

Task Manager doesn't start when I hit Control-Alt-Delete. Is there a way to restore this?

Thanks.
 

A:Control-Alt-Delete Not Working

16 more replies
Answer Match 64.26%

HP PRIVILION DV4-2126TX REMOTE CONTROL NOT WORKING PLS HELP ME..

More replies
Answer Match 64.26%

Help! I have Windows XP and the Windows Antivirsu Pro continues to request that I purchase a subscription for viruses. Norton wants me to buy the anti-spyware but I do not want it. I have no anti-spyware now because my previous one has run out. Now for some reason my computer shuts down at will and I cannot activate the control panal to delete Norton. Please help.
 

More replies
Answer Match 64.26%

The remote control of my DVD recorder lets me record and see what I record, but the buttons to set the channel doesn't work, so I use the buttons on the recorder unit. The problem is that with this buttons I can't reach channels above 39, because it cotinues with channel 2.

I changed batteries and the problem continues.

Any ideas to reach channels above 39 to record them?
 

More replies
Answer Match 64.26%

Have a new Thinkpad R31 with Ultranav mouse button and touch pad. Running XP fully up-to-date. The mouse control in Control Panel sets the mouse button functions just fine but does not seem to be able to control the touch pad settings. I want the touch pad for only scrolling but checking that and clicking Apply and OK, nothing changes. It still acts like a normal mouse. Or the changes are only good until the next restart. I am able to disable the touch pad but that's not what I want. I recall the control worked at first. What's up?

A:Touch Pad Control Not Working

you'll have to get the specific driver for that device. i had a very similar issue, and it wasn't until i got the original driver.

so, if your drivers are up to date, then try to roll back your driver. or download an older one.

cd

4 more replies
Answer Match 64.26%

Hi,

Sorry if this is a repeat, but I searched and didn't come up with anything directly related to this question.

Control Z (undo) isn't working in Office or anywhere else (notepad, email, anything). I'm not sure how I managed to turn it off, but it would be really appreciated if someone could help turn it back on. I use ctrl z, x, c, and v for undo, cut, copy, and paste all the time. Everything but ctrl z still works. Now that it isn't working, I've realized how much it helps my productivity.

Thanks!

A:Control Z (undo) not working

Hello ogallupe and welcome to Seven Forums.

I've heard that people who use Skype sometimes use Ctrl+Z to mute the microphone. Doing so makes Ctrl+Z (the undo command) not work in other programs. If you have a system restore point that goes back to before this problem started you may be able to roll back your computer to a good working state.

System Restore

Another possibility is to check for damaged or corrupt system files. Run a system file checker scan from an elevated command prompt (option two.) If problems are found, run the scan 3 times and reboot the computer after each scan.

SFC /SCANNOW Command - System File Checker

Please post back if anything helped or not.

4 more replies
Answer Match 64.26%

Hi . I've just installed windows 7 on my new computer and noticed that control & paste doesnt work, and so I checked in services to see if it had started and couldn't find it at all. Can any one help me solve this please? Its driving my crazy!

A:Control & paste not working!

Clip Board in services has nothing to do with copy and paste on a local computer (Your computer), it's used to copy and paste over an remote desktop environment or perhaps over VPN. Try another USB keyboard to rule out a problem with Windows. If you have a laptop you can connect a USB keyboard as well and see if all keyboard functions work.

9 more replies
Answer Match 64.26%

Hi there,

I've installed some updates for Windows 7 a couple of days ago and have now noticed that there is a problem with the computer mouse left-clicking on anything when my desktop loads up. However, it is intermittent as sometimes I will turn the computer on and all the mouse's controls will work just fine.

I've tried multiple mice to no avail so it rules out a problem with the mouse itself.

I have had really strange behaviour where the mouse will work within Google Chrome but not in anything else, or in just Firefox. I have also had it where I can only left-click on icons within my desktop but not anything within any programs loaded via my keyboard (start menu>>program) or anything on the taskbar.
At the moment I have a window open to proceed with an installation and I can't click anything on it as the window just disappears behind Firefox.

I'm really confused why and how this could have happened - it almost seems as though a part of Windows 7 doesn't load properly to tell my computer how to use any mouse device

Any suggestions would be very welcome!

Thanks,

KugarWeb.
 

A:Mouse control not working

6 more replies
Answer Match 64.26%

Hi ,I can't get my profiles to start ... how do I do it?

A:Light control not working

Hello @HendrikLondon, Thank you for posting on the HP Forums! I have read your post and see that you are unable to get some profiles to start on your HP OMEN 15-5200. What profiles are you referring to?Is it the profiles to sign into the notebook? Please elaborate on the issue, I am happy to help. I look forward to your reply!

1 more replies
Answer Match 64.26%

Our web based accounting software opens in a popup window. When trying to search for specific data it is helpful to use control + find (ctrl+f). On one users computer the find option does not work. I thought maybe it was a user profile problem but
no matter who logs into the computer the control find does not work. I have removed and reinstalled IE, upgraded to the latest version, went back to an older version (9) with no luck.
Any help would be greatly appreciated.

More replies
Answer Match 64.26%

My control and w keys work perfectly fine seperately, but together it doesn't work.
I know it has the default function similar to alt+f4 but it's also a commonly used combination in games.
When I have W pressed, and press control, it works, for example to crouch while already moving in counter strike, but if I have control pressed first it doesn't work. Also if i release control, it has about a 1 second delay before w picks up, and if i release W while already moving, it picks up if i press W back down quickly.
This isn't just a problem in counter strike, and the default bind does not work. And it is not possible to bind Ctrl+W to a button in WoW. I have tested all the keys around, and they all work with control. Shift and Alt functions also work perfectly fine.

I am using a Logitech G19 Keyboard.

A:Control + W not working in any program.

Try pressing your Pause/Break button this should solve the issue.

6 more replies
Answer Match 64.26%

Hi,My brightness control does not work. Fn buttons for brightness control don't work as well. I've tried all methods given on the internet such as updating the driver through device manager, changing the startup application etc. Quite frustrating that I cannot change the brightness settings. However, I realise that after I click on 'Let me pick from a list of device drivers on my computer', it states that I have two of the same display adapters.  Thanks  

A:Brightness control not working.

I'd suggest removing/deleting them all from device mgr. Then reboot and allow the system to re-install. Jack E/NJ

1 more replies
Answer Match 64.26%

Dear Team,   We purchased new Notebook HP 240 G4. In which we install windows 7 (64 Bit) we download all the drivers from HP support and also installed. But Brightness key F2 and F3 not working on HP 240 G4.  Please help 

A:Brightness Control Key not working (F2 & F3)

Hi Have you tried the combination of fn + F2 or F3 key at the same time?

3 more replies
Answer Match 64.26%

Hi I have a Asus H61M-k mother board. When I first got the board the CPU fan would rev when playing games. I have had this board about 3 month now. But last month I noticed that the fan doesn't speed up and it use to as soon as I went into games but now its spinning same speed all the time.

I checked the bios and Q-fan is and chassis are enabled in the advanced setting and set to standard. I changed this to turbo and silent but nothing happens in ez mode.

Any help would be great full

A:Asus Q-fan control not working?.

Also in game I used AI tweak 2 to monitor CPU and nothing alters when playing games or on Desktop it still the same.

CPU fan 900 to 1100 RPM
Vcore 1.072V
+12V 12.192V
+5V 5.000
Temp CPU 34 to 37c.

Is this normal?.

1 more replies
Answer Match 64.26%

The icon on my taskbar is not function. Okay, when I change the volume through my keyboard it works fine. I can still get into Sound Options (Playback/Recording/Sounds/Communications) but Volume Control, Volume Mixer, and Volume Control Options won't load. Nor will they load through Control Panel.

Strange, they were working earlier today.

I'm using Windows 7 SP1

A:Volume control not working?

Since this is a recent problem, use the System Restore and restore back to a date when it did work. Usually this will take care of new problems. System Restore can be accessed from Start/Programs/Accessories/System Tools. System Restore will not delete any user date or e-mails.

1 more replies
Answer Match 64.26%

Task Manager doesn't start when I hit Control-Alt-Delete. Is there a way to restore this?

Thanks.

A:Control-Alt-Delete Not Working

Does it say it has been disabled by the administrator? Are there any other errors or messages?

8 more replies
Answer Match 64.26%

Not sure if I have a virus but have run different scans which show nothing.  I only get the processes running on my PC when I hit control + alt + Delete. Help please!!

A:Control + Alt + Delete not working

 : First you say "CAD" ([Ctrl][Alt][[Del]) is "not working", then you say you "only get the processes running on my PC"?
 
What happens when you press [Ctrl][Alt][[Del]?

3 more replies
Answer Match 64.26%

When I click on my taskbar volume control, it doesn't pop up and it is in the mute condition. I have poked around the computer, but am unable to do anything about the problem. I just downloaded a major Vista upgrade (about 165MB) hoping that the problem would go away, but . . . to no avail. The computer is a fairly new HP table top unit. Can anyone help?

Since I wrote the above, I noticed that when I right click on the volume control, I am unable to open the Volume Mixer . . . must be related. lol

A:Volume control not working

have you tried to unmute form control panel, sound icon, click on playback and click on your speakers and then the properties button at the bottom - then click on the Levels tab and you can click on the speaker to mute and unmute
see if this helps

haven't had to do this before, but if you go to the advanced tab there is a restore default button

6 more replies
Answer Match 63.84%

Purchased acer laptop last year...vista home.
A few days ago, the FN/volume control stopped working.
The FN/brightness works fine.
Any suggestions?
I searched the forum but could not find an answer to this specific problem.
Thanks.

A:FN/volume control stopped working

Try pressing Alt+Ctrl+Fn and see whether it works.
You could also try reinstalling Acer Launch manager.

2 more replies
Answer Match 63.84%

i just installed eset 7 30 day free trial and turned on parental control for default user I set age to 14 but it is not blocking any site in the list
 

A:ESET parental control not working

hi there have you consult their forum here: https://forum.eset.com/
 

1 more replies
Answer Match 63.84%

    I'm using Win7 64bit in Inspiron 3542.
   After i resume windows from hibernate, brightness control is not happening using quick keys. Every time i need to go to control panel & change manually. Other quick key functions are working except the brightness control.  The brightness bar stuck like below.

  Even killed quickset process & opened again, nothing useful in it. But when i reboot the system it starts working, and problem starts again when i hibernate.

A:brightness control not working after hibernate

I take it that when you notice this, restarting the notebook corrects the problem every time? I am not suggesting this as a solution(sometimes i would rather see the dentist than have to restart one of my PCs) but I want to make sure that this isn't a hardware issue. 
When you notice the problem with the brightness keys try holding down FN when pressing them and see if there is a change. 
As another test go into Windows and change the power plan and change it to "high performance" before hibernating the notebook. Before resuming plug in the AC adapter and see if you are now able to adjust the brightness, if you are able to then this becomes less of a problem with the function key behavior and an issue with power management. 

TB

1 more replies
Answer Match 63.84%

Hi guys,

when I hit the volume icon it opens everything is ok(playback,recording,sounds) except volume mixer and control options. When I hit either of thes nothing happens (all drivers are updated) any help would be appreciated thanks.I forgot too mention I do have sound.
 

More replies
Answer Match 63.84%

If open user account and then click 'manage another account', nothing happens......
I have put the UAC slider all the way down...now i cant even open user account control when i click on it,nothing happens............
On the whole there is no response on anything which involves UAC verification........
Any operation with the UAC shield beside it has no response...........
I am getting bugged up with this problem,i cant even uninstall a program.......
I dont want re-install windows........

A:User account control not working

You might have damaged or missing system files. Try running System File Checker,

SFC /SCANNOW Command - System File Checker

If that doesn't work you could try a repair install. You won't lose any personal settings, files, folders, etc.

Repair Install

2 more replies
Answer Match 63.84%

Using windows 10/64 with IDT High Definition Codec.  Sound works fine but cannot use any of the IDT enhancements.  Notice in EQ panel below frequency goes from 0Hz to 0Hz: I have uninstalled the device, reinstalled the IDT software and reinstalled the device.  Again, I have good sound but cannot enable/use any of the enhancements.  Thoughts, suggestions??  Thanks for your help!! 

More replies
Answer Match 63.84%

After installing new Windows7 ultimate OS.Brightness control keys are not working of my laptop.My laptop model is HP RT3290I search for drivers but not find suitable.I  also search for wifi driver but not find suitable.SO please solve my problem. THANKYOU  1  

More replies
Answer Match 63.84%

Hey new here,,

my ATI cataylst control center isnt working, it should come up but it doesnt, and when i click on it says Error Encountered exiting, I've tried re-downloading the drivers.. three or four times & yes it was right drivers.. I dont know what to do..

any help is taken greatly.. Thanks & Hi
 

More replies
Answer Match 63.84%

Hi there,

I've got a Satellite Pro R50 - bought just 1 month ago.

Suddenly the Function F3 command to control the brightness has stopped working.

The Brightness can go down with Function F2 but F3 doesn't work

F3 Works in software and the Windows OS to pull up search, but not pulling up the control for brightness.

As such I'm stuck with my brightness down as low as it goes.

I've downloaded the latest Function key driver and installed, so it's not that.

Anyone got any help they can give?

Cheers
Craig

A:Satellite Pro R50 - Brightness F3 control not is working

As temporary solution you can change brightness level in power settings.
I really cannot understand what the problem can be but try to install Toshiba system driver and then Toshiba function key utility again.

3 more replies
Answer Match 63.84%

Basically my control panel will be my downfall and I may have to kill myself, because I hate my life and add/remove programs won't work causing internet explorer to go haywire, and I hate my life more in turn. Help me fix my control panel.... please. This is very annoying and my computer is going down the tubes because of my contol panel. thank you for your time
 

A:Control Panel Objects Not Working!!!!!

15 more replies
Answer Match 63.84%

Hi all, Im not too clever with PCs, but recently Ive noticed a fault when I go to control panel. Most of the sub menus in there wont work, it just keeps saying "windows\system32\rundll32.exe application not found

Can I sort this myself or do I need to take my desktop to PCworld or similar?

A:Control pannel not working (rundll32 )

Go here: http://www.kellys-korner-xp.com/xp_tweaks.htmScroll down to item no 12: EXE (lnk and regfile) Fix for Windows XPClick it and choose "Run"

4 more replies
Answer Match 63.84%

Dear All,

I had a problem of 'Sudden shut down'. I have get it fixed by Professional.

I have reinstalled Vista OS with the CD provided by Dell and performed Disk partition. Now, I am facing the below issues.

1.Alt+F4 to close any window/browser is not working

2.When I clicked on 'Personalize' by right clicking on the desktop, I am encountering an error message saying that you have restrictions on the computer. Contact your system administrator.

3.While sending mails through IE browser, in the mail text box, when I select the text and Ctrl+B or Ctrl+U or Ctrl+I are clicked, the text is not getting reflected in bold/underline/Italic manner respectively.

Please let me know if I missed out anything while reinstallation,disk fragmentation process. I have installed the drivers CD also, Webcam is also not working for me.

I would really appreciate if you shed some light on the above issue and provide your inputs.

Thanks,
Shiva

A:Control keys are not working after reinstalling OS

have you got the latest drivers for it?

1 more replies
Answer Match 63.84%

Normally, with Windows 10, if I use the slider and turn off the Volume in my taskbar, if I play a video or whatever, I cannot hear anything. But lately all of a sudden, even if the Volume Control is off, the sound is still on if I do anything on my computer, which is not good because if my speakers are on, it wakes up the person I am living with.

I did a System Restore but it still is not helping any. So in the morning now, I have to try to remember to turn the Volume all the way down on my speakers, or else it wakens my friend.

Can anyone help me to fix this problem please?

More replies
Answer Match 63.84%

when i turn on my lap after a few seconds a message is popped out saying " catalyst control center has stopped working "
can anyone please help how to resolve this issue ????

A:" catalyst control stopped working "

hi , 
try to install again the Display Driver, you can download it from here: http://support.amd.com/en-us/download

1 more replies
Answer Match 63.84%

All right, here's my stupid problem. (Win98 1&1/2 edition)
It all started back when I was using Nessticle to play some of my old games. The volume control at times would just not work, and when it did, sometimes the sound for the entire program would become distorted. I'd have to close and open the emulator while randomly changing both the master volume and wave volume and hope that it had the right volume. Now I'm trying to use SuperMorse and it will not work properly in Windows. No matter what I try, when I run it in pure DOS mode the volume is either maxed out or at the minimum level. So, I need something to change the volume to something in-between.

My sound card is an ES1887 Plug and Play Audiodrive. I've tried downloading several different drivers and utilities at the manufacturer's website, but they either don't work in DOS mode or don't work for my sound card. And recently I can't even find the page they had all the drivers on. I imagine I've looked everywhere I can think of by now on how to fix this, and even people who've asked this question before never found out the solution. However...

All I really need is something to fix the bug (if it's one of those little `mistakes' in Windows) or a program with a volume control that runs in pure DOS mode -- that way I can run it, change the volume, return to the command line, and use SuperMorse. That should do it. Please, please, please help.

-- Clarphimous
&... Read more

A:Volume control for DOS programs not working

8 more replies
Answer Match 63.84%

Hi all.

I have suddenly lost the ability to use my control+left or right arrows. Not just in word but on all places I type using the computer, even this message!

I use this key constantly as I am a secretary and do lots of documents and letters and it is driving me nuts not being able to use this function.

When I reboot I sometimes get the function back for a short while then it disappears again.

I have just had a brand new computer put in but it happened sometimes on my old PC too so I don't think it's a hardware issue. I am wondering if I have accidentally hit a combination of keys to disable it or something.

Other functions work (control/Alt/Delete, etc) just not this one, which is my most used quick key!

Thanks in advance.

Karen x

A:Control+left/right arrows not working

Try the 'enable hokeys' file from here.
Windows Key Shortcuts - Enable or Disable

5 more replies
Answer Match 63.84%

Hi, I have a pair of old Yamaha speakers and an SB Live Value sound card and I'm running XP. The speakers have a volume control and a headphone jack on them. Up until recently they were working fine but then my children were playing around on the PC and now neither the volume control on the speaker nor the headphone jack works (if I plug in the headphones the sound continues to be played through the speakers).

I've searched through the archives but haven't spotted anyone who has had a similar problem and since I've been banging my head against the wall for a couple of weeks I'd really appreciate some help.
 

A:Speaker volume control not working

If I read your post correctly, you are still getting sound from the speakers, right? It kind of sounds like the speaker controls and the headphone jack have been damaged somehow. Do you have another set of speakers you can test with or another PC to try these speakers on?
 

3 more replies
Answer Match 63.84%

I have tried each and every steps described before including uninstalling of monitor driver and removal of display adapter and scanning for change in hardwaresBut still i m unable to get the brightness controllAlso provide with the graphics driver for amd r5 m430

More replies
Answer Match 63.84%

I've having trouble with my Nvidia Control Panel. Whenever I switch to 3D Settings and then switch tab to Program Settings, this error pops up.

http://img222.imageshack.us/img222/7954/nvidiaglitchuk5.jpg
When I click OK the control panel shows the two Select a Program and Specify the Settings boxes, but they're both empty.

How can I get all the games to appear again?

I've already tried reinstalling the 94.24 drivers and I restarted my computer several times.
 

More replies
Answer Match 63.84%

In my windows 8 HP laptop, brightness control buttons F2 & F3 suddenly stopped working. How to resolve this issue ?
 

More replies
Answer Match 63.84%

I have recently upgraded from  windows 8.1 to windows 10. After the upgrade i installed all the drivers and tried all the methods given online but they all failed . please help me find the solution to this problem .

More replies
Answer Match 63.84%

Hello, I recently did a fresh install of Win7 32bit on two computers (Dell Optiplex 330, 360) in my office. The installation went fine but I noticed that both computers have errors in the control panel.

On one, if I open the control panel from the start menu (CP homepage) it opens for a second, then closes and I get a 'Windows Explorer has stopped working' error -> it asks to look for online solutions and finds nothing. However, this only happens to the main Control Panel page, if I open a section of the Control Panel like the 'Adjust Screen Resolution' via search bar, it opens fine.

On the other, control panel works fine, but when I open the 'Backup and Restore' section, I get a blank menu screen. It has the title 'Backup and Restore' but there are no buttons or options.

Is there a way to re-install control panel? Or other ways to fix this problem, I don't plan on re-formating.

A:Control Panel stopped working

Most likely Control Panel is crushed by a new menu item which was installed with Dell video or audio drivers.

Turn Hidden files option On and then turn hide SYSTEM files option OFF.
And search for *.CPL files in C:\Windows\

Something outside the list could be Control panel item, causing the problem.
Before deleting anything backup and make sure it is not a default Windows Control panel menu item.

For Backup and Restore try to start this file
C:\Windows\System32\sdclt.exe

5 more replies
Answer Match 63.84%

Hi, I have bought HP g5 245 and have installed windows 7 ultimate 64 bit. I am facing a problem that i am not able to reduce screen brightness using the brightness buttons. The brightness is stuck at the highest level. Please suggest solutions

More replies
Answer Match 63.84%

The issue is resolvedI would like to know how to get hp splash screenI dont hav it

A:Re: Brightness Control Unavailability and Non Working of Hot...

Welcome back @shrayank!  I moved your post for better exposure because the splash screen not showing up is a separate issue from the original brightness issue you had experienced and resolved. By accepting the solution when the issue is resolved, others will be able to find the steps that work also.   To help computers start faster, on some models the HP splash screen is not displayed during the start up process. In this case,you can try these steps to see if it is possible for you to enable the HP logo screen:Restart the computer.Press F10 repeatedly to enter the system BIOS screen.Select the Boot section using the right arrow key.Select Boot-time Diagnostic Screen using the up and down arrow keys.Press Enter to select boot-time diagnostic.Select Disabled to show the logo screen.Press Enter.Press F10, and then press Enter to save the changes and exit the system BIOSThis should enable the splash screen if it is available to be enabled.  If this reply helped, please use the Accept as Solution button. If you want to give me a virtual high five, please click the Thumbs Up icon below.  Thank you for coming back and seeking another helping hand from the HP Support Forums community! Have a great day! 

1 more replies
Answer Match 63.84%

ctrl+z not working right in any applications (chrome, autocad 2012, sketchup 8, and notepad, and normal windows functions tested.) i was working on homework in sketchup and noticed that my ctrl+z wasn't working, and did some testing and found out this.

control works on its own
z works on its own
other control commands work fine
if i mash it 5-30 times it decides to work once
tried all of that in the listed applications

reboot didn't help.

dxiag

------------------
System Information
------------------
Time of this report: 9/5/2012, 16:35:37
Machine name: ZAKATAK-PC
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503-2030)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 02/05/10 19:13:52 Ver: 08.00.10
Processor: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (8 CPUs), ~3.4GHz
Memory: 8192MB RAM
Available OS Memory: 8168MB RAM
Page File: 3941MB used, 12395MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Display Tab 2: No proble... Read more

A:control+z combo not working in any applications

Did you try a different keyboard?

2 more replies
Answer Match 63.84%

Windows XP:

I've had this problem for months, and have done multiple thousand virus scans since. I would much rather not format.

Whenever I try to open Display, nothing pops up. I am logged in as admin and have tried it on every account. And now since I've got a new monitor I need to change the resolution!

Any help is appreciated!
 

A:'Display' in Control Panel not working

Click on START, RUN and type REGEDIT, press OK. This opens the Registry Editor. Be careful not to change anything!!!!

Look for HKEY_CURRENT_USER - click on + to expand it.

Click on - Software, Microsoft, Windows, CurrentVersion, Policies, System.

Then, under System, look for the file called NoDispCPL - this means it's the settings for displaying the Control Panel.

Highlight NoDispCPL and double click - a box will appear called "Edit DWORD value"

In the box called Value Data, it will have the number "1" - change this to zero "0".

Click OK

Close the Registry Editor.

You should now have access to your control panel Display settings.
 

1 more replies
Answer Match 63.84%

Logfile of Trend Micro HijackThis v2.0.2Scan saved at 11:33:02 PM, on 11/5/2009Platform: Windows Vista (WinNT 6.00.1904)MSIE: Internet Explorer v7.00 (7.00.6000.16386)Boot mode: NormalRunning processes:C:\Windows\system32\taskeng.exeC:\Windows\system32\Dwm.exeC:\Windows\Explorer.EXEC:\Windows\System32\hkcmd.exeC:\Windows\system32\igfxsrvc.exeC:\Program Files\PowerISO\PWRISOVM.EXEC:\Program Files\Windows Sidebar\sidebar.exeC:\Program Files\FlashGet Network\FlashGet 3\Flashget3.exeC:\Windows\ehome\ehtray.exeC:\Windows\ehome\ehmsas.exeC:\Program Files\Norton AntiVirus\Engine\17.0.0.136\ccSvcHst.exeC:\Program Files\Windows Sidebar\sidebar.exeC:\Windows\system32\wuauclt.exeC:\Program Files\Mozilla Firefox\firefox.exeC:\Program Files\Trend Micro\HijackThis\HijackThis.exeC:\Windows\system32\SearchFilterHost.exeR1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://securityresponse.symantec.com/avcenter/fix_homepageR1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157R1 - HKLM\Softwa... Read more

A:Please help me out with this log file... my control panel is not working....

Hello cooldude25_9Welcome to BleepingComputer ==========================Download OTL to your desktop.Double click on the icon to run it. Make sure all other windows are closed and to let it run uninterrupted.When the window appears, underneath Output at the top change it to Minimal Output.Under the Standard Registry box change it to All.Check the boxes beside LOP Check and Purity Check.Click the Run Scan button. Do not change any settings unless otherwise told to do so. The scan wont take long.When the scan completes, it will open two notepad windows. OTL.Txt and Extras.Txt. These are saved in the same location as OTL.Please copy (Edit->Select All, Edit->Copy) the contents of these files, one at a time, and post it with your next reply.===========Download This file. Note its name and save it to your root folder, such as C:\.Disconnect from the Internet and close all running programs.Temporarily disable any real-time active protection so your security program drivers will not conflict with this file.Click on this link to see a list of programs that should be disabled.Double-click on the downloaded file to start the program. (If running Vista, right click on it and select "Run as an Administrator")Allow the driver to load if asked.You may be prompted to scan immediately if it detects rootkit activity.If you are prompted to scan your system click "Yes" to begin the scan.If not prompted, click the "Rootkit/Malware" tab.On the right-side, all items to be scanned should be checked... Read more

1 more replies
Answer Match 63%

How to open "All Control Panel Items" from the command line? thanks...

A:Command Line Open Control Panel\All Control Panel Items

Is this what you are referring to?

List of Control Panel Command Line Commands

8 more replies
Answer Match 63%

the requested control is not valid for this service control service

i get that in a box when i turn on computer
what is it and how do i tell if i have a trojan ?

thannnksss!!!
 

A:the requested control is not valid for this service control service/TROJAN HORSE?

11 more replies
Answer Match 63%

The volume decrease key(f7), increase key(f8), mute key(f6) were working fine until  i do the last windows 10 update, this week. What should I do to solve this problem? Thanks

More replies
Answer Match 63%

Hi! I just bought my new HP laptop and the volume control buttons are very sluggish. I have to press it a few times in order for it to work and the mouse pad keeps on "catching". It isnt very smooth. I was wondering if there was anything I could do to fix this? Thank you! Would appreciate the help Kind regards HKD16

More replies
Answer Match 63%

I got MCE 2002 SP2 running on my computer and as of today my remote control doesn't work properly. I can't turn on Media Center using the remote anymore. I can still change the volume and do pretty much everything else with the remote except for turn on Media Center. Even When press the Live TV button or DVD Menu button it wont turn on MC. I got ehtray in starting when I boot windows and the remote works fine once I turn MC on through the computer.
Also, there used to be this volume indicater that would pop up towards the bottom of my screen when I would change the volume using the remote or keyboard and thats gone too and I would like to bring it back.
Any ideas??
 

More replies
Answer Match 63%

Everytime I try to open up the control pane, Vista tells me that Windows Explorer has stopped working, then restarts it.

I'm using Business Ultimate 64bit. I've run sfc /scannow several times.

I have a custom built PC,
Giga-Byte EP35-DS4 Motherboard
Intel Core 2 Quad at 2.4Ghz, Kentsfield model
2GB Ram, Crucial Ballistix DDR2
eVGA GeForce 8800 GT
Seagate 500GB HD
Samsung DVD Burner
Encore Wireless card

That's about it. Default BIOS setup. Any help would be appreciated... I tried running 'msconfig' and disabling all Non-Microsoft Services and all Startup items.

Interestingly enough, when I boot into Safe Mode I can access the Control Panel just fine. I don't know what that means.. I'm new to this, I'm a Mac user by default.

Thanks in advance!

A:Control Panel cause Explorer to stop working

Hi,

Do you have in system32 a file named: Firebird2Control.cpl ?
If yes, remove it from system 32 and it should work.

23 more replies
Answer Match 63%

The volume decrease key(f7), increase key(f8), mute key(f6) were working fine until  i do the last windows 10 update, this week. What should I do to solve this problem? Thanks

A:Volume control keys on keyboard not working

Hi, Try the following. Download the Realtek HD Audio installer on the link below and save it to your Downloads folder. http://ftp.hp.com/pub/softpaq/sp75501-76000/sp75513.exe When done, hold down the Windows key and press R Into the Run window, type devmgmt.msc and hit enter. In Device Manager, expand Sound, Video and Game Controllers.  Right click the Realtek device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall. When complete, download and reinstall the Chipset driver on the following link. http://ftp.hp.com/pub/softpaq/sp75501-76000/sp75505.exe When the Chipset reinstallation has completed, restart the notebook. When windows has reloaded, open your Downloads folder, right click on the Realtek installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook and let windows fully load for a few minutes before checking. Regards, DP-K

1 more replies
Answer Match 63%

Hello,   The volume control keys had suddenly stopped working and I have no idea why. I own the model HP ENVY NOTEBOOK -15 -ae101no (ENERGY STAR). Could you please help me fix it? Thank you!

A:Volume control keys on keyboard are not working!!!

Hi, Try the following. Download the Realtek HD Audio installer on the link below and save it to your Downloads folder. http://ftp.hp.com/pub/softpaq/sp74501-75000/sp74867.exe When done, hold down the Windows key and press R Into the Run window, type devmgmt.msc and hit enter. In Device Manager, expand Sound, Video and Game Controllers.  Right click the Realtek device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall. When complete, download and reinstall the Chipset driver on the following link. http://ftp.hp.com/pub/softpaq/sp72001-72500/sp72105.exe When the Chipset reinstallation has completed, shutdown the notebook. Unplug the AC Adapter and then hold down the Power button continuously for 30 seconds, then release it. Plug in the AC Adapter. Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter. When windows has reloaded, open your Downloads folder, right click on the Realtek installer and select 'Run as Administrator' to start the installation.  When this has completed, restart... Read more

1 more replies
Answer Match 63%

Hi, I need help with the Intervideo Home Theater remote control-after changing battery the program is not responding. What if anything can I do?
 

More replies
Answer Match 63%

Hi guys i have this log from hi jack this i need help with it thanksLogfile of Trend Micro HijackThis v2.0.4Scan saved at 9:20:22 AM, on 2/16/2011Platform: Windows 7 (WinNT 6.00.3504)MSIE: Unable to get Internet Explorer version!Boot mode: NormalRunning processes:D:\APC\apcsystray.exeC:\Users\overdrive\AppData\Local\Google\Chrome\Application\chrome.exeC:\Users\overdrive\AppData\Local\Google\Chrome\Application\chrome.exeC:\Users\overdrive\AppData\Local\Google\Chrome\Application\chrome.exeC:\Users\overdrive\AppData\Local\Google\Chrome\Application\chrome.exeC:\Users\overdrive\AppData\Local\Google\Chrome\User Data\Default\Extensions\ghgabhipcejejjmhhchfonmamedcbeod\7.0.0.0_0\plugin\ClickClean.exeC:\Users\overdrive\AppData\Local\Google\Chrome\Application\chrome.exeD:\Malwarebytes' Anti-Malware\mbamgui.exeC:\Users\overdrive\AppData\Local\Google\Chrome\Application\chrome.exeC:\Users\overdrive\AppData\Local\Google\Chrome\Application\chrome.exeC:\Users\overdrive\AppData\Local\Google\Chrome\Application\chrome.exeC:\Users\overdrive\Desktop\HijackThis.exeR1 - H... Read more

A:Control panel and windows update not working .

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!Please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.Click on the Watch Topic Button and select Immediate Notification and click on proceed, this will help you to get notified faster when I have replied and make the cleaning process faster.In order for me to see the status of the infection I will need a new set of logs to start with.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.DeFogger: Please download DeFogger to your desktop.

Double click DeFogger to run the tool.
The application window will appear Click the Disable button to disable your CD Emulation drivers Click Yes to continue A 'Finished!' message will ap... Read more

3 more replies