Tech Problem Aggregator

Outlook 2010 and IMAP - DELETE Does DELETE

Q: Outlook 2010 and IMAP - DELETE Does DELETE

Hi there
Be careful with IMAP and Outlook 2010 as the DELETE really does DELETE stuff off the server.

In Outlook 2007 you got a line through the items and had to do EDIT==>PURGE to delete stuff off the server so be careful if you really DON'T want to physically delete mail from the server when using OUTLOOK 2010 - especially if you still need the email and are just testing OUTLOOK 2010 on one machine and need the email on other machine(s).

There might be settings to change this but I've basically used the defaults -- there is quite a bit of change from Outlook 2007 to 2010 (it's actually much nicer - more in keeping with the rest of Office 2010).

Cheers
jimbo

A: Outlook 2010 and IMAP - DELETE Does DELETE

Thank you jimbo45 for this warning.

I hope you did not remove an important message.

Best regards,

zx81

6 more replies
Answer Match 85.5%

Hi all
Note to you guys with IMAP and Outlook 2010.

When you DELETE now it works similar to POP3 -- the delete mail now gets moved to the DELETED folder in the IMAP folder which you then delete via the DELETE option in the menu or right mouse click on the item in the folder view.

On Outlook 2007 the item had a LINE through it which you then deleted via PURGE.

I think I prefer the newer method -- but beware if you run more than one computer as DELETE now really does mean DELETE and the item will appear in the deleted items folder.

If you have one computer with Outlook 2007 and another with Outlook 2010 you won't be able to see or DELETE the items in Outlook 2007 if you deleted them in Outlook 2010.

I don't think it's a real problem -- but just be aware of the differences in how the two releases work. (IMAP only -- POP3 works just like it did before)

Cheers
jimbo

A:Outlook 2010 IMAP - Delete is different to 2007

I have just the opposite issue. Outlook 2010 eliminates messages from my list as soon as I delete them (and sends them to the appropriate folder, where I can still find them before purging). Is there any way I can get 2010 to act like 2007 and strikeout the deleted messages until I elect to purge them? None of my attempted manipulations under Account Settings has accomplished this end.

4 more replies
Answer Match 84.6%

I am trying to set up my Gmail account in Outlook 2010 using IMAP. In previous versions of Outlook, when I hit "delete" in Outlook, the message left the ?Inbox,? but was still in the ?All Mail? folder (I believe it removed the label "Inbox" from the message). However, in Outlook 2010, the message is moved to ?Deleted Items? and is no longer in ?Inbox? or ?All Mail.? So there is no longer a copy archived to "All Mail." I have read the other posts concerning this issue, none of which work. If there is a solution, please help.

Jeremy


Operating system (e.g. WinXP): Win 7 Ultimate
Program and version you use to access Gmail (e.g. Internet Explorer 9 or Outlook 2003): Outlook 2010
Your antivirus software (e.g. Norton 2007): Kaspersky Interney Security 2012

A:Gmail IMAP and Outlook 2010 delete issue

No suggestions?

1 more replies
Answer Match 98.28%

Many apologies if this has already been discussed. I just switched my account from POP to IMAP because I want to view new email on both my phone and Outlook 2007 on my computer.

When I delete a IMAP message in Outlook, I would like the message moved to the Trash folder, then deleted from the Inbox (not just marked for deletion). You may ask, why not just use POP. First, I do not want to leave the messages on the server when using POP. If I use POP, then the phone will not see the message it it is downloaded to Outlook first.

I am guessing that a possible solution is to use IMAP on the phone, and POP in Outlook. What do you think?
 

A:Delete IMAP in Outlook

Hi wsmyth

If you use that configuration - IMAP on your phone and POP for Outlook 2007, make sure you configure Outlook 2007 to Leave a copy of the messages on the server. Otherwise, Outlook 2007 will delete the messages from the server when you download messages into Outlook 2007.
Tools > Account Settings > E-mail tab
Double click the e-mail account to Change or select the e-mail account and click the Change button.
More Settings button > Advanced tab
Place a check mark in: Leave a copy of messages on the server
OK > Next > Finish > Close to save and close.
That configuration should work, set it up and send yourself a few Test messages to test it.
 

3 more replies
Answer Match 96.18%

Hello all,

I run most of my daily operations off of my iMac and I run Entourage on my Mac for email.

I have two IMAP accounts that I access on a regular basis. In Entourage, I have an option in the advanced tab for each account that allows me to handle how I want to handle deleting messages from the IMAP server.

It's called "Delete Options" and I have selected "Move messages to the Deleted Items folder" selected.

This is great because I always have my deleted messages stored in this file for future reference. Note: I also have the "Purge Deleted Items" option selected to purge this folder every 180 days.

My problem is I use a PC when on the run and I would like it to handle deleting items the same way as my Mac. Right now, when ever I delete an item in Outlook, it does not go to the Deleted Items folder. It just magically disappears forever. Can someone help me out to get Outlook to act like my Entourage. Thanks.

More replies
Answer Match 94.92%

Is there a way to make outlook delete mail in the sent folder with a imap account? I delete them and they stay, albeit with a strikethrough showing they are marked for deletion. But the only way to delete them so they are gone is go to my webmail page of the account and delete them there.

A:delete sent outlook mail imap account w/o doing it in webmail?

IMAP protocol's biggest advantage is also its biggest problem: the folders are and remain synchronized. You can move the sent messages to another folder to keep Sent folder empty, but in doing so both the Sent folders (local and server) will become and show empty.

Simple answer to your question: no, it's not possible. Check your provider if it is possible for you to use POP3 protocol, it would allow you deleting locally and keeping files on server and vice versa.

Kari

1 more replies
Answer Match 85.26%

The 2 marked calendars don't have a delete option in the right-click context menu and a google search didn't give any useful results so here I am. How do I delete these 2?

A:How do I delete a Calendar in Outlook 2010

Probably a silly question, but did you place a check mark in the boxes to the left of My Calendar and Calendar first?

You should then be able to right-click each calendar and choose Delete.

4 more replies
Answer Match 85.26%

Whenever I try to delete a message by clicking the Delete button at the top of the screen I get the message "The Deleted Messages folder is unavailable". The folder is there and I can delete by dragging the message to it, but why won't the Delete button work?

A:Outlook 2010 Delete button

You might want to ask the guys over at the Office forum located HERE.

Good day!

Mike

1 more replies
Answer Match 85.26%

Hi,

I'm using Outlook 2010 on Win7. For some reason, the feeds are no longer syncing and when I go into accounts, there are no feeds listed there. Not a huge deal because I want to start fresh.

Is there a way to remove all the feeds that are in the RSS folder just sitting? I imported a huge list of feeds and have a ton of folders. It's looking like I have to delete each one individually. Before I move on with this tedious task, I thought I'd ask just in case.

Thanks in advance!
Erin
 

More replies
Answer Match 85.26%

When I change my outlook 2010 in options / account settings, I change it to "delete from server". When I load outlook 2010 up again, it goes back to "leave on server for 14 days. Why won't this keep my settings to delete it from server when I receive the e-mails. I have 3 accounts, none will keep my "delete from server", they all go back to leave a copy on server.
Thanks
 

More replies
Answer Match 85.26%

I am so frustrated with Outlook 2010 right now and it doesnt behave the same as in Outlook 2007. I have the luxury of doing it in two VMware and keep making clones until I get it right.

My killer question is :

I have two accounts on Outlook 2010 now.

1. First account I use the auto thing to get my gmail using my username and passport and it created this FIRST account that allow me to sent/receive email.

2. Second account I use a .pst file from Outlook 2007 using the do 'data files' tab and now I make it my default and I want everything save here.

Now, I want to delete my first account, but if I do, I cant use it to sent out email anymore on my second account.

How do I do all these and only have one account?

Thanks for helping.

A:How to delete a folder in Outlook 2010

I have solved my problem! hahahaha

After making so many copy of Vmware trying to get the right setting, I have done it!

I hate using IMAP. It makes everything so slow!

I now use pop3 on my Outlook 2010 for Gmail.

If I have to sycnronized thing, I might as well use the web version of Gmail.

So in my case, I use pop3 cause thats all I want.

You have to configure it manually doing pop3. Then there is this section to tell it you want to use a existing .pst file that you have got from 2007.

NOW I am seeing only one account and it can sent/receive. No more of those funky folders that on gmail.

3 more replies
Answer Match 84%

Hi Guys is it possible to set up my Outlook 2010 to delete my email from the server once I have downloaded and read them ?

Many thanks

Steve

A:Delete Email from Server using Outlook 2010

Yes, you can delete email from the server using Outlook 2010.

Exactly how can depend on: What type of email account(s) you have such as IMAP, POP3, ...
Who the email provider(s) are such as Gmail, Hotmail, ...
How you want your email saved...
I'm assuming this is for Home email and you installed, configure, and control Outlook.

If this is for any Work email account(s) where Outlook is controlled by "Corp. policy / Email administrator" that can make a difference.

7 more replies
Answer Match 84%

What have I done?
I migrated email hosts over the last few days and all was working fine yesterday.

- I backed up my imap files on the client (Outlook 2010 to a .pst)
- I pointed the account to the new mail server
- Inbox was unaffected except new email popped in
- All my existing folders vanished (as expected I think)
- I imported the backed up folders and mails
- All my old folders & emails appeared (but in a 2nd "outlook data file" section)
- I dragged them to my email folder
- I could watch them sync up by logging into webmail
- Last night all perfect
- today I logged in and started to drag and drop a few more folders
- Tried to delete an email in the inbox and got "The operation cannot be performed because the object has been deleted"
- Somewhere along the line (yesterday) I had already set the root folder to "inbox" by the way - near the start of the import process - all fine
- Today on the PC / Outlook I can send and receive fine but I cannot delete an email

I am wondering if in my drag and drop I hit inbox instead of the folder above where I was dragging mail folders but other than that I can't think of anything that changed or would cause the error.

Any suggestions? I set up an extra Thunderbird account and that works fine so it must be an Outlook set up problem I guess. I'd like to keep using outlook for my main mail account so any advice more than welcome
thanks
Mike

More replies
Answer Match 84%

Greetings.

I've just upgraded my Outlook 2010 ANSI .pst file to an Unicode format by creating a new .pst and importing data from the old .pst. I want to delete the old .pst, but I get the error message "You cannot delete this Outlook data file. Configuration information in the file is being copied to your new default data file. You can delete the file after this information is copied."

I don't think information is being copied, as I've waited to see if it would resolve, but I do think that there is still some connection to the old .pst file that is preventing deletion. I have changed the folder of my email accounts' storage location to the new Unicode .pst. What else do I need to do?

OS: Windows 7 64-bit.

Thanks.

A:Cannot delete Outlook 2010 data file

After the file change, did you try a reboot and recheck to see if issue persists.

2 more replies
Answer Match 84%

How can I permanently delete emails in outlook 2010 w/o first sending them to the deleted folder?
 

A:Permanently delete emails in Outlook 2010?

Hold down the SHIFT key while deleting them.
 

2 more replies
Answer Match 83.16%

Hi there
I've got a GMAIL account which I access via OUTLOOK 2010 (IMAP)


I've googled for this but the solution doesn't work --there's there's no TRASH folder under GMAIL.

How though do you delete PERMANENTLY Email -- If you delete it from the BIN folder it goes to Deleted folder -- if you empty this folder and then click on the gmail all mail folder it all re-appears again.

I've got something like 4500 mails now that I can't seem to get rid of -- if I have to do this via gmail itself then it rather makes the whole point of using OUTLOOK pointless in the first place. The only reason I opened a GMAIL account was because of its integration with OUTLOOK.

Deleting emails goes to the delete folder - now if I empty that the mail is seen again in the ALL mail folder - deleting that goes to the BIn folder and deleting that goes back again to the delete folder -- endless roundabout.



Cheers
jimbo

A:Permanently delete email from gmail with outlook 2010

Maybe something here which could help:
How to Delete Emails from Gmail IMAP Access Mail Client ? My Digital Life






Quote:
In Outlook 2010 and some email, you can set Outlook to automatically move the deleted items to [Gmail]/Trash folder on the server. To do so, go to the ?Account Settings? of the Gmail account, and change its account settings. At ?More Settings?, go to ?Deleted Items? tab, and select ?Move deleted items to the following server on the server?, and select the ?[Gmail]/Trash? folder in the tree list.



An email message in Outlook can appear in many folders (applied with many labels). Typically, once you delete the email and move it to Trash, the email should be removed from other folders by Gmail too. Perform a sync or Send/Receive All Folders (for Outlook) so that mail client can synchronize the change that takes place on Gmail cloud after deletion. If for some reason Gmail and mail client does not automatically remove to Trash a delete email from all folders (labels), and the supposedly deleted emails on folders other than Trash folder, then manual deletion from each and every folders is requires. This including from [Gmail]/All Mail folder which archived all mails.
Once the e-mails are moved to Trash folder, it will be automatically purged by Google server process after 30 days. You can also configure your mail client to process purge permanently items mark as trashed or deleted in the original folder automatically f... Read more

2 more replies
Answer Match 83.16%

Hi

I have setup an email address to open up in Outlook 2010. My host provider has asked that I set it up so that emails can be deleted from server after x amount of days. Unfortunately, unlike on my other laptops, I cannot find this option. I have gone into Advanced Settings etc but it appears to be missing. (Please see print screen image.)

Does anyone know how I can access this information?

A:Outlook 2010 - Missing Delete From Server Information

Hello Natasha007, welcome to Seven Forums.

The reason is because you have set your account up as IMAP. The option you are looking for comes with a POP3 account, which is set up like this:
Microsoft Outlook 2010 Email Account Settings [Setup]

3 more replies
Answer Match 83.16%

I have several "groups" in my outlook contacts, I need to remove some users from these groups. However, I only have their email addresses. Is there a way for me to do a search to remove the email addresses? Otherwise I'll have to sift through all my groups looking for each individual email address.

A:Outlook 2010 Groups-How do I search/delete certain emails?

Welcome to Seven Forums,

Just need to clarify your concern here.... are you trying to delete Contacts, Emails (from Inbox/Sent Items) or email addresses from the Group that you have created?

2 more replies
Answer Match 82.32%

I found that if bad settings got entered when going into Outlook 2010 Pro (x32 option) for initial setup that sometimes I need to erase those things before re-installing. But, it remembers the previous user specific information and customizations after a re-install. How can I delete all that garbage so its a fresh install?

A:How delete all traces of user in Outlook 2010 so re-install is fresh

Go to control panel Mail and create a new profile under ''profiles'' .
Make sure you keep a back-up of your previous one though.

HTH
Kk

3 more replies
Answer Match 82.32%

Hi I was having a problem where outlook was not syncing my sent mail past last week.

so I deleted my email address account and wanted to start again and change settings from pop3 to imap

When I deleted the account I found I could not fully remove it from the side pane as it was set as the default email address.

I then decided to re add the same email address in the hopes that I could use the new one as default and delete the old one

Now I am still stuck with the same email address that I could not remove from before and I am having a new problem where the sent mail will not sync from today

I have uninstalled office and re installed it but the address is still saved somehow?

any help would be greatly appreciated

A:How to delete all account information from outlook 2010 an start fresh

Try this. Open Control Panel, select the Mail (Microsoft Outlook 2010), when that opens select Email Accounts, that will then open your email accounts & you will see that you can remove accounts, reset the default account & set up a new email account, as you can than follow through from here to set up all the details for a new account.

All Outlook account details are stored in your Documents Library under Outlook Files & are stored in .pst format & can only be accessed from within Outlook & any changes can be done as I mentioned above.

2 more replies
Answer Match 82.32%

I have a customer who is receiving duplicate emails because their name is in the To line and they are also included in an AD group in the Cc line. We are in the process of migrating from Lotus Notes to Outlook 2010 and I do not yet have access to Outlook (Exchange) to try a hands-on approach to test for the customer, but I need a rule to delete (or move) the duplicate emails the customer is receiving, so he is only left working with one copy of the email.

So, I guess it needs to be something to the effect of:

Condition:
where my name is in the To or Cc box
AND
where my name is included in the AD group XYZ

Action:
Delete (or Move) the message to the Trash (or specified folder)

Can this be done? Thanks in advance!
 

More replies
Answer Match 82.32%

Is this possible? If so how? Thanks!
 

A:How to create a rule in Outlook 2010 to delete duplicate emails?

Not possible. Why are there duplicate emails?
 

3 more replies
Answer Match 81.48%

I have my gmail set up as IMAP. When I set up my gmail account in Outlook 2010, it brought in all the email from the gmail server (thousands). That's okay, but what I would like to do is delete most of the emails (and the folders I set up in gmail) WITHOUT deleting them from the gmail server. I see in the gmail settings some instructions on deleting and expunging, but the terminology is confusing to me. Can someone tell me how to do my gmail settings such that when I delete something in Outlook (whether it be a gmail folder of individual emails), they are not deleted from the server? Sorry to be redundant, but I don't think I'm being very clear. Any help would be appreciated.
 

A:Solved: Email deleted in Outlook 2010-want NOT to delete on gmail server

16 more replies
Answer Match 81.48%

I have Outlook 2010 and Windows 7. If I Delete an item in Outlook it goes into Deleted in Outlook and gmail which is fine. However if I Shift Delete it does not go into Deleted but remains in All Mail in both gmail and Outlook and this seems incorrect.

Any thoughts?

Nick

A:Permanently deleting gmail items using Outlook 2010 Shift Delete

Why do you use Shift+Delete. I have never used it nor have I heard of it being used before. If Delete does what you want, just keep using it.

9 more replies
Answer Match 81.48%

Hi all
Having totally WIPED office 2010 from my system and re-installed again the problem I had with the "Purge" folder not appearing now is SOLVED.

However you still don't get a line through the deleted items -- but they are in Trash folder now.

This is BETTER but still NOT WHAT IS NEEDED -- as another computer with Outlook 2007 doesn't get the "Non purged" items in the inbox which it should do.

IMAP should effectively leave items in the Inbox until purged -- otherwise I might as well go back to POP3 - more fiddly to manage whern you leave stuff on the server but it works.

What I'm resigned to doing now is to use the REST of the office 2010 suite (EXCEL etc) which is really good but stick with Outlook 2007 for email.

Cheers
jimbo

A:Outlook 2010 Saga with IMAP, Can I use Office 2010 and

I do like the way 2010 deletes the emails without purge, but I have found that rules randomly fail and some mail goes awol for a while when switching between folders (it reappears after a while)

IMO outlook 2003 is still the best (I hated 2007) but I will reserve full judgement until 2010 is out of beta.

1 more replies
Answer Match 80.64%

Hi,
I have one user who is getting a weird issue, she actually needs to click twice on the delete button to an email on outlook 2003.. connected to the same server no other user get this problem and as you know one click on the delete button is normally enough to delete an email..

Anyone can help please...

cheers
Ash

More replies
Answer Match 79.38%

I am a new member and this is my first post about Thunderbird email. Please excuse me if I posted in the wrong place.

I am using Thunderbird 7.0.1 with IMAP on a Windows 7 Professional 32 bit machine. I have Thunderbird setup for IMAP.

When I delete a message on my Android Cell phone using IMAP the messages delete immediately.

Periodically like today, when I want to delete an email from my Thunderbird Inbox or from the Junk folder I repeated hit the delete key on the keyboard or from the toolbar and the messages do not delete - the email stays in the folder.

Sometimes the messages delete OK but many times like today they don't delete.

Since I do not have this issue with my Android phone I am thinking Thunderbird is not communicating with the server. My incoming and outgoing mail is always OK.

Does anyone have an idea what the problem may be and how to fix it?

Thanks.

A:Cannot delete IMAP messages in Thunderbird

IMAP folder cannot be deleted - MozillaZine Knowledge Base

3 more replies
Answer Match 78.12%

Hi guys, this is my first post here, I hope I'm posting in the right section and not breaking any rules.
So, here's the deal: at the place I'm working al the emails accounts have been configured as POP back in 2006. They're paying for a domain, etc., now they want to access the mail from their homes, so I have to change the configuration to IMAP.

I'll have to go one by one and edit all the accounts.
My question is about the importing the old (pop) emails they've been saving over the years (few GB for each, but it doesn't matter).

How do I do it? Make en export of all their folders/emails, configuration/etc., delete the POP account, and re-add it as an IMAP one? And after that just import the .pst file I previously saved? That will import all the emails and folders?

Or I'll have to just import the .pst file, and move - with my hands - the emails to the IMAP account?

Also, in the future if needed, I'll be able to make back-ups of the IMAP emails? I'll be able to download them all and store them locally?

Thanks in advance for any input or help!
edit: please, a kind mod, move this to: Browsers & Mail. Thanks!

A:Outlook 2010 - POP to IMAP

Hope this is what you are looking for. I would try it on a test account first...

Convert from a POP3 account to IMAP | MSOutlook.info

2 more replies
Answer Match 78.12%

hello i have an imap account and a hotmail account in outlook. everytime i open outlook the msn tree is always expanded and my imap (personal email) is always closed.

woult there be a way to have outlook rememeber how i leave them when i close outlook so when i open it they are in the same state?

thanks

win7 x64

A:outlook 2010 imap

There is no way that I'm aware that you can get it to remember the state it was when last closed, but I find having it open the imap inbox by default is the next best thing.

Options -> Advanced -> Outlook start and exit

1 more replies
Answer Match 78.12%

Hi all
Is there anyway to make the Delete function in Outlook 2010 work the same as in Outlook 2007 (and earlier) with IMAP.

In Outlook 2007 delete doesn't actually DELETE the email but just puts a line through the items. Mail is actually deleted when you go to ==>edit===>PURGE.

In Outlook 2010 it deletes the mail straight away (like POP3 defaults).

I prefer the old method as I often use more than one computer for email and need to ensure that I've copied all relevant emails to local folders on the relevant machines before physically deleting email from the server.

Having a line through the items makes it easy to quickly check whether I've "deleted" something I need on another machine.

I can see lots of people usuing corporate email sytems with remote laptops / "roaming machines" coming to grief with this issue.

Cheers
jimbo

A:Outlook 2010 with IMAP

Is that what you are after....

2 more replies
Answer Match 77.28%

Hello,
I have set Gmail in Outlook 2010 and the set up went flawlessly. I have noticed that it takes way too long to check mail. Someone said to configure pop instead of imap and it would be faster. I found a tutorial on this and it did not work. Any one know how to help me with this? Thanks,
John

A:Outlook 2010 imap too slow

I just tested changing an IMAP Gmail account to use POP instead, following the instructions found on this site. Just choose your Outlook version from the list. Works flawlessly.

You have to enable POP, of course, from the Gmail settings: Open Gmail web interface, click Settings, and check POP is enabled.

Kari

9 more replies
Answer Match 77.28%

First System Info:-
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4026 Mb
Graphics Card: NVIDIA GeForce 9300M GS, 128 Mb
Hard Drives: C: Total - 292746 MB, Free - 132287 MB; S: Total - 1499 MB, Free - 1448 MB;
Motherboard: Sony Corporation, VAIO
Antivirus: Microsoft Security Essentials, Updated and Enabled

I am new to IMAP.
I currently have 2 devices enabled to receive and send email - these are:-
This computer and an HTC Desire.

The HTC Desire synchronizes well.

The MS Outlook on the computer IMAP was configured automatically.
I can send from Outlook but am not receiving any mail.

Where have I gone wrong ??

FrancistheMule
 

More replies
Answer Match 77.28%

I am running Outlook 2010 and have set up 2 separate IMAP accounts. Both are sync'd with my IPhone 4 and on the face of things it all works quite well. However, for some odd reason, when receiving email on one of my IMAP accounts (for the purpose of this questions let's call it account 2) the email arrives in both IMAP Outlook inboxes. If I receive email to account 1 the mail only arrives in the IMAP email inbox for account 1. The annoying result is that many of the emails I receive i.e. those for account 2 are sitting in both inboxes. Does anyone have a solution or advice to help please? This unfortunate issue is replicated on my Iphone 4 (of course).
 

More replies
Answer Match 77.28%

I am migrating my data to another Windows 7 computer running Office 2010. I have a large gmail account, containing over 50,000 emails. I want to keep my old emails for research/tracking purposes. I am wondering what you recommend I use, POP3 or IMAP? I currently use POP3 on my older desktop but see that Outlook will automatically set up your account using IMAP. What are the advantages to this?

Thanks!
 

More replies
Answer Match 77.28%

I am having a few issues with my IMAP work email setup on my home pc. I have my personal POP gmail setup and my work IMAP email setup on Outlook 2010. The gmail account works perfectly but my work email has issues.

I can't send emails. I try to "test account settings" and I get completed on both the IMAP login and the send test email and I get the test email in my inbox but when I actually try to send an email it doesnt go through.

I don't automatically get emails. I have to click on each folder to update emails.

Each time I click a folder to update outlook has to update cache messages.

I also get a send/receive error at the bottom often and when I click this it says outlook cant access the data file. I tried to create a new data file by renaming the old one and letting outlook make a new one but that didnt help.

This slows me down a great deal when I work from home so any guidance would be much appreciated.

Please help!
 

A:Outlook 2010 IMAP issues

You need to work with your company's IT support so they can review your account and your settings, there is no way for us to tell if they are correct and autodiscover (if it is even set up) only works for outlook everywhere usually through a proxy.
 

1 more replies
Answer Match 77.28%

Okay, I have had this problem several times and now I want to know what is causing the problem. In outlook you can add certain folder to your favorites so that they appear like short cuts at the top of the navigation window. But from time to time different imap short cuts don't appear and then I have to close and restart to get the short cuts to reappear.

Any ideas as to why?

A:Outlook 2010 and IMAP account

Also if you go to the inbox, if that is one in your favorites, and right click it gives you the option to remove from favorites even though it is not displayed. After removing and adding will also show them back at the top. But this is a pain in the back side.

1 more replies
Answer Match 76.86%

Hi,

I keep receiving notifications that my IMAP mail server is full and need to clean it up by deleting older emails.

I mainly use outlook 2007 to manage my 4 email accounts in 4 seperate folders and so I made .pst backup of all my email accounts but when I delete them from my IMAP and restore the back up there appear again in my IMAP server.

I have tried to make different (offline) folders but it seems I cannot restore a back up in to this. I also tried archiving my folders but since I use 4 different email accounts, the archive keeps overwriting the folders with the last email account selected.

All I want is: place my back up emails in a seperate (offline) folder per account so I can at least access my old emails in Outlook after I have deleted them from my imap server (I understand and accept that than I can only read those emails from my harddrive and not any more on my tablet or phone, but at leas I have one place where I can find them...).

Thanks!
Jappie
 

A:Solved: How to delete emails on IMAP server but have a copy of messages available in

Thunderbird provides a default pseudo-account called Local Folders. Appears that Outlook has a similar capability called Personal Folders or Outlook Data Files. Here is one article. Search for "Outlook local folders" for similar articles.
 

3 more replies
Answer Match 76.86%

Hello. How can I make gmail pst file the default delivery location in place of exchange ost?

We switched away from Exchange (2003) to gmail IMAP. All needed emails and contacts are now in gmail and are synched with the local machines.

I cannot delete the exchange data file in Outlook 2010 "account settings." because it is the "default deliver location." It says to create a new one. How do I do that? Thanks.

A:How do you delete exchange data file, leaving just gmail IMAP?

Is there a better place to post this?

4 more replies
Answer Match 76.44%

Have a similar problem as described in this closed thread at http://forums.techguy.org/business-applications/1058645-email-mail-merge-2010-problem.html
Have IMAP email accounts with Gmail and have set up a Pop account to re-enable mailmerge but after running a successful merge preview, the emails don't get sent out. Any other ideas ?
 

More replies
Answer Match 76.44%

Hi all
Not sure I've posted this before but if you use IMAP please note that DELETE in Outlook 2010 now DOES delete mail from the server.

Outlook 2007 and earlier just had a horizontal line through the items you want to delete. You then had to use edit===>Purge to actually delete the mail from the server folder.

So if you don't actually want to DELETE the mail from the folder then be careful.

I like having the line through the items - as I often use another machine such as a laptop and can also select what items I want copied to the "personal" inbox on the laptop before finally purging the mail.

BTW for the most part I'm extremely impressed with Office 2010 beta.

Cheers
jimbo

A:Outlook 2010 Beta and IMAP -- BEWARE

Good tip Jimbo, thanks.

9 more replies
Answer Match 76.44%

Hi all
I'm now configuring Outlook 2010.

Things like email I've never really paid much attention to since on my machines they always seem to "just work" (from OE==>OUTLOOK) and EVOLUTION on Linux.

However setting up an account on Outlook 2010 I've got a choice between IMAP or POP3. The ISP I'm using supplies both so what should I choose here.

I rang the ISP but got fed up with the endless dreary "Press X for options a.b.c.d", then another load of automated messages with another set of options again before probably being connected to some call centre in India / Bangladesh or wherever .


(If I was ever dictator of the planet my first act on day one would be to OUTLAW all these automated telephone systems and have HUMANS answering them --it would create loads of jobs too ).

So what should I choose. In the past I think POP3 was always the default and never given it a thought but I've seen IMAP mentioned a lot recently.

Anyone ?

Cheers
jimbo

A:Outlook 2010 Difference between IMAP and POP3 ??

I have used IMAP for years and have grown so used to it that I cant imagine going back to POP3...

5 more replies
Answer Match 76.44%

Hope I'm in the right forum. Have two Gmail IMAP email accounts and 4 pop email accounts in one pst file. Has been working fine.

Now pop account emails show up in sent folder as properly sent with time and date sent...they aren't going anywhere. Have sent tests to myself to no avail.

Also emails sent thru Gmail IMAP never make it to any sent folder in Outlook and I get an error message stating that the server will not allow sent emails to be placed in the Outlook sent folder.

If I go on Google and open Gmail, sent emails are in the sent folder.

Help

A:Windows 7 - OUTLOOK 2010 - Gmail IMAP

You'll need to provide exact configuration for each account, just the server stuff, not login or password.

As I understand it, you have two Gmail accounts set up to receive using the IMAP protocol. And you have four accounts using the POP3 protocol. Unfortunately you didn't specify the mail server (Yahoo, AOL, Gmail....) for those accounts.

IMAP does that - you should see the sent mail on Google. I'll check to see if there's and option to also store the sent mail locally (in Outlook). You could help by providing the exact msg that you get and any error codes.

Please also fill in your System Specs (there are lots of HP machines) - see the Easy System Specs in my sig?

1 more replies
Answer Match 76.44%

I have a IMAP account on Outlook 2010. When a message is sent from this account and only when the recipient gives a read receipt, this message automatically has a strike-through in my sent items folder, when the read receipt is read by me in my inbox.
Further when the read receipt is deleted by me from my inbox, the original sent item gets deleted from the sent items folder and also gets deleted from the IMAP server.
All other sent items remain intact.
Please help with a solution.
 

A:IMAP sent items deleted in Outlook 2010

outlook puts a struck through when a message is marked for delete

under file> options> mail>
have a look to see how you are handling read receipts
 

1 more replies
Answer Match 75.6%

Hi all

I haven't discovered a way yet of switching a POP3 account to IMAP without deleting and re-defining the email account in Outlook 2010.

IMAP is a better way if you access the same email account from multiple machines. If the account was originally defined with POP3 there doesn't seem any mechanism to change it to IMAP without deleting and re-creating the entire account.

This means backing up and restoring all the messages, address books etc before doing this -- a bit of a pain if you have to do this for 50 - 100 users and their email accounts.

Any quick fix or have I missed something.

Cheers
jimbo

A:Outlook 2010 cannot change POP3 account to IMAP

You haven't missed anything, as far as I know there is no way to change pop to imap.

A bit of a warning though, in the past when I have switched users from pop to imap and I added the additional IMAP account then moved the stuff from the pop account folders to the IMAP, sometimes email etc just disappears completely despite saying it had copied.

7 more replies
Answer Match 75.6%

Hi, I'm using OL 2010 with Windows 7 Pro x64. I have this problem of OL not syncing all my imap accounts. I have various imap account for different purpose. One for reading tech journal, one for ebay and so forth. Right now, I will only see there is incoming mail when I click on it. Once I look on the folder once then I will see new mail w/o having to click the account to see new mail. I though imap suppose to automatically get email for me or am I wrong?

A:Outlook 2010 will not sync imap folder automatically

Hi slam5

I am Sampad from Dell Social Media.

Try the following steps :

Open Outlook > Click on Send/Receive Tab > Send/Receive groups >Settings for group "All Accounts "> Enable all the options and schedule the interval for automatic send/receive
 
 
Let me know if this worked or not.
 
Thanks and regards,
Dell_Sampad_C
Dell Social Media Responder
https://www.facebook.com/Dell
https://twitter.com/dellcares

3 more replies
Answer Match 75.6%

I tried to set up Microsoft Outlook to read my Yahoo POP 3 and IMAP and this is what i typed in for the required slots:
As account type I put in POP 3 (the 1st time and then did the below again this time with IMAP) then.
incoming mail server: imap.mail.yahoo.com
outgoing mail server: smtp.mail.yahoo.com
The above found on the yahoo page regarding this subject.
Followed by my correct username (the full email address and correct password but in testing the account settings in outlook
The message was: "Log onto incoming mail server (POP 3) failed" and the same thing for the testing of email sent/received.
I followed instructions made here:
Set up email in Outlook 2010 or Outlook 2013 - Office Online
What was done wrong?

A:Setting up Outlook 2010 with pop3/imap SMTP

Check out this link and don't forgot to set the correct ports https://ph.help.yahoo.com/kb/mail-fo...pressions=true

9 more replies
Answer Match 75.6%

Hy guys, my first post here,
I was wondering, is there any way to optimize start-up performance of Outlook on Windows 7? Ok, I've tested quite bit with it.
I'm dual booting Win7 and XP, on my notebook, HP6830s.
On first configuration, XP SP3, Outlook 2010, Kaspersky KAV 6.0, start-up time of my e-mail account is 10sec. I use IMAP protocol, and have e-mail server locally. Thats quite good.
On other hand, I have win7, Outlook 2010, Kaspersky KAV 6.0. Same account, same protocol, it takes about 50sec. Why is that?

I've downgraded it to 2007, on both hands, but the start-up times were same.The POP protocol seems fine. But I have to use IMAP protocol.

Why is this? Why Windows 7 is slowing down my Outlook start-up? Indexing? Add-ins? I've turned it off already, both of them, every add-in and indexing e-mails...

A:Windows 7/Outlook 2010/IMAP/slow start-up

I noticed that on my outlook 2010 also, IMAP took forever, I guess its broadband dependent. So I went back to POP, works quick. Never figured it out though!

1 more replies
Answer Match 75.6%

I have 3 computers setup to send and receive IMAP/SMTP mail from my domain server using Outlook 2010, 2 with Win 7 and one with XP.
Everything was working up to 10 days ago, 19th Jan was the last email I received normally. Since then I cannot get the 2 Win 7 machines to receive my mail. The XP machine still works fine. The emails are on the server obviously or XP would not fetch them and I can see them in the web mail client. Sending test emails from the Win 7 machines is not a problem.
I have checked the account settings between XP and Win 7 and as expected they are identical. Last Windows Updates were installed on 13/Jan/2012 and the Win 7 machines were working after then.
Appears something else in Win 7 is at fault.
Thanks for any suggestions.

A:Outlook 2010 IMAP mail stopped recieving

Fixed. My domain host made some changes in cPanel for me that fixed it.

1 more replies
Answer Match 75.6%

Hi there.
I'm using outlook2010 on two computers. Both have the same IMAP Gmail account set up.
When I'm accessing outlook 2010 on my laptop, I receive new headers but these same headers won't show up in my desktop outlook 2010. Since the same account is set up as IMAP no both computers, shouldn't I see the same inbox?

Thanks,

Gil

A:IMAP folders doesn't sync outlook 2010

Yes, you should. I had some trouble with Outlook changing my Port numbers when I would select SSL and TLS Authentication, which is likely your issue. Be sure to check the second computers settings so they are the following:

Incoming Mail (IMAP) Server - requires SSL:imap.gmail.com
Use SSL: Yes
Port: 993 Outgoing Mail (SMTP) Server - requires TLS:smtp.gmail.com (use authentication)
Use Authentication: Yes
Use STARTTLS: Yes (some clients call this SSL)
Port: 465 or 587 Account Name: your full email address (including @gmail.com) Google Apps users, please enter [email protected]_domain.comEmail Address: your full Gmail email address ([email protected]) Google Apps users, please enter [email protected]_domain.comPassword: your Gmail password

Reference

I think MS is still working some kinks out with the IMAP intergration so if all else fails you can switch to SMTP in the interim depending on your OS.

If you found this helpful please provide me with Reputation

9 more replies
Answer Match 75.6%

Hi,

I have used POP3 for all my mail on my outlook client since I first had email. With this method my multiple email accounts can be seen in a combined inbox on my windows pc.
I use IMAP to access the same accounts on my iPhone and iPad, so that I can get mail whilst travelling etc..

Up until very recently if I read an email on my IMAP accounts via my iPhone or my iPad the message would still download to my pop3 accounts on my windows client (I use my pc as the oracle and the apple products as tools). Now it appears that as soon as I read the message in IMAP the POP3 download no longer downloads the message?
I've tried marking "read" messages in the IMAP inbox "unread" in the hope that the POP3 access will download the message, this did not work. I'm now wondering what has changed with GMAIL (they altered their mail system recently), such that POP3 does not download all inbox messages that have not been downloaded to POP3 before?

If I try and search for this on the web, all I get is info about comparisons of IMAP and POP, which I understand.

If any one has any ideas that would be a great help.

cheers

Ant

A:Outlook 2010 and POP3 with IMAP from iPad Issue

Is it possible that when you read your emails on one of your programs that it is not leaving a copy on the GMail server. In other words once the email has been downloaded it is deleted from the server.
I use Outlook in Office 2013 & copies of emails are left on the server for 14 days, but this can be set to a period that suits you.
I do not use Gmail so I can't speak for it. Perhaps checking your Gmail server to see if you can reset the period of time copies of emails are left on their server.

6 more replies
Answer Match 75.6%

I have a client with outlook 2010 and connected to the BTInternet email service using IMAP

the problem is , that 2010 does not work offline for this account
And when I looked in appdata/Microsoft/outlook
I could find NO OST files

i dont have access to BTinternet - But on my Gmail, outlook.com, AOL, YAHOO emails
i have OST files and all my emails are visible offline

Not sure if this is BTInternet issue or a setting that needs changing

Any suggestions ?

I dont have immediate access to the PC at the moment

More replies
Answer Match 75.6%

HI

I am a newbie here so forgive me if i posted this in the wrong section..

The issue that i am having is that

I have a user that is using outlook 2010 and as a IMAP account. As of recent her mails(some of them ) the words when from plain readible english to this Aƒa€sA‚ Aƒa€s .....?

Can any one tell why it did this or what i could do to resolve the issue, as mentioned before these are old mails that she was ble to read....

Office:Aƒa€sA‚ Aƒa€sA‚ Aƒa€sA‚ Aƒa€sA‚ Aƒa€sA‚ Aƒa€sA‚ Aƒa€sA‚ +27 (0) 21Aƒa€sA‚ 401 0604
Email: Aƒa€sA‚ Aƒa€sA‚ Aƒa€sA‚ Aƒa€sA‚ Aƒa€sA‚ Aƒa€sA‚ Aƒa€sA‚

and it is not the whole mail that is in these special characters just parts of it....

Thanks
The Newbie.
 

More replies
Answer Match 74.76%

Recently upgraded Outlook 2007 to 2010 on a Win7 PC to address a bug in Outlook '07 whereby any deleted messages magically reappeared after 5 seconds. All other IMAP synchronization worked fine. That problem thankfully no longer occurs with the new Outlook '10 version.

However, a new problem now happens consistently in Outlook 2010 that I've been unable to resolve. When sending a new message, the message is delivered to the recipient normally, but there is absolutely NO copy of it anywhere to be found...either in Outlook or on the IMAP server. It just disappears. What DOES show in the "Sent Items" IMAP folder are all messages sent from two other devices (another PC running Outlook 2003 and a smart phone) that are correctly syncing with IMAP. I've checked all Outlook settings, even experimented with changing the "Send" options in IMAP settings, all to no avail.

Any ideas of what to check/change next? If I need to provide more info please advise.

Thanks much.
 

A:Solved: Outlook 2010 IMAP issue...Sent Items disappear

Turn off the other devices that are using IMAP and see if the sent items folder populates correctly.
 

2 more replies
Answer Match 74.76%

Hi there
I'm trying to play around with SKYPE's IM (Instant messaging) on the desktop.

On the SKYPE panel at Import contacts from Outlook it only shows the "Stinking Facebook junk" - however in all the software blurb in the documentation Outlook 2010 support Instant messaging -- just sign in to your IM program when you pop up the contact.

Anybody got SKYPE IM to work with Outlook 2010 (Private users -- at work I'd use LYNC which works flawlessly).

(Any other FREE messaging program that will work with outlook)



Cheers
jimbo

A:Outlook 2010 imap address book cannot import to SKYPE

Please check this step by step guide to import Outlook contacts to SKYPE: Outlook Contacts in Skype | MSOutlook.info

2 more replies
Answer Match 74.76%

Hi guys, as I am using both a laptop and tablet to check email I have set up both devices with imap accounts.

The issue is that I don't want to lose all my old folders and email from the old pop3 account and I can't find a way to move or copy them to the newly created account on my laptop so I'd like to leave the old account, inactive, in Outlook.

Also, I don't want to get messages into two different folders.

Is there a way to disable the old pop3 account without removing it?

I have tried deleting the password so it won't send/receive from that account but all I get is the constant "enter password" box which is naturally not an ideal state of affairs.

I'd appreciate any advice users can offer.

Thanks in advance,
Jo

PS it probably isn't relevant but FYI the tablet is a Motorola Xoom Android and the laptop is an Asus running Win 7 Home Premium and Outlook 2010 as in the subject line.

A:Outlook 2010: created new imap account, how to disable old pop3?

  
Quote: Originally Posted by boppy2010


Hi guys, as I am using both a laptop and tablet to check email I have set up both devices with imap accounts.

The issue is that I don't want to lose all my old folders and email from the old pop3 account and I can't find a way to move or copy them to the newly created account on my laptop so I'd like to leave the old account, inactive, in Outlook.

Also, I don't want to get messages into two different folders.

Is there a way to disable the old pop3 account without removing it?

I have tried deleting the password so it won't send/receive from that account but all I get is the constant "enter password" box which is naturally not an ideal state of affairs.

I'd appreciate any advice users can offer.

Thanks in advance,
Jo

PS it probably isn't relevant but FYI the tablet is a Motorola Xoom Android and the laptop is an Asus running Win 7 Home Premium and Outlook 2010 as in the subject line.


you can simply move the emails of your pop account by going to "edit" on the top left corner and "select all" you'll see that all your emails are selected, then right click and select "move to folder" and move it to your IMAP mails location. and doing this may allow you to remove the pop3 account.

either way, let us know what you get.

3 more replies
Answer Match 74.76%

Hi,

I have downloaded Office 2010 Pro Plus from MSDN, got my key after the 1st of May.

In Outlook 2007 SP2 receiving via IMAP from GMAIL worked okay.

Using exactly the same settings in Outlook 2010 I am not able to make a connection to imap.gmail.com, Port 993 using SSL. IMAP is enabled in GMAIL-Control panel, the Account/Password information is correct, sending the test mail via smtp.gmail.com, Port 587 via TLS works fine.

In the Outlook 2010 Beta that connection works as it does in Outlook 2007 SP2.

In Outlook 2010 Final from MSDN there is no chance to connect to the IMAP server - I just got a timeout all the time and had to use POP instead.

This disappoints me, I anticipate more quality coming from Redmont.

Did you have any suggestions what I can do to receive my mail via IMAP, any additional settings, registry hacks etc.?

Event the final Hotmail-Connector 14 does not work as the beta or version 12 in Outlook 2007: All time when synchronizing my mailboxes in Hotmail I receive an error message: Error when synchronizing your Mailbox [email protected]
Check whether your account is configured correctly by checking your mail in the browser.
I did that several time - But without any changes to those warnings. I think I receive all my mail.

After all, I am disappointed

Thanks for your comments, different experiences

Sincerly yours Oblomow

P.S.: I had to change to the german Office 2010 Pro Plus Package since the is no German spell checker inc... Read more

A:IMAP (gmail) doesn't work - Office Outlook 2010

If I were you I'd delete all mail accounts and try again. My Gmail IMAP (SSL 993) works perfectly as does Hotmail.

8 more replies
Answer Match 73.92%

Outlook 2010, Win7, email account: outlook.com (1 of 2 accounts)

Error code 0x800CCCDD
Protocol: IMAP
Server: imap-mail.outlook.com
Port: 993

Outlook 2010 had 2 functioning email accounts prior to the MS required remove/add of an Outlook.com account due to MS' server change. I used the recommended, automatic add (after the remove) for the Outlook.com account. Outlook.com is now an Exchange account. During the add, there was a message indicating the Exchange account would 'take over', and so it did. Unilaterally it took over the default position--oddly, this despite mail accounts indicating the second (a MAPI account) email account was the default. This was unacceptable.

So I proceeded with MS' second option--a manual add with Outlook.com being an IMAP account not Exchange. This sort of worked. The second account is back again as the default however Outlook.com is persistently and erratically not connecting or losing connection per the above error.

The only fix I've found googling was to uncheck Outlook's mail options to do any kind of automatic send or receive. That seemed to work for a while but the errors are back--just not as frequent.

This error is not present when doing the required Outlook.com remove/add with Outlook 2007 with the same second account that's the default.

Any suggestions?

A:Outlook 2010 error: 0x800CCCDD--IMAP server closed connection

You should be able to set which email account you want as the default one. In Outlook 2013 you can do this by selecting File then Account Settings & on the window that opens you can see which one is the default email account.

On the same line as where there are options for New, Repair, Change there is one to Set as Default. This will be greyed out for the Default Account, but if you click on the other account you will be able to set that as the default account.

4 more replies
Answer Match 73.92%

I just downloaded Outlook hotmail connector from the official download website, and installed it to try, and explored it , it was working fine!.

After that I deleted the account and reconstructed it using pop3 conf., but didn't like the idea of no status update reflect to the webmail ,

Finally decided to use the IMAP Configuration to have the features of the connector which I tried First,

I deleted the pop3 account to return back to the connector configuration, the config. done successfully, but when outlook start it fail to pass the receive process , and produce the following errors:
x8004102A , x80041050

after restarting the outlook and trying again send/receive, the receive process comes to no end. until errors appear or cancelling it.

I just noticed that it restored the contacts, drafts and the folder structure on of my account from the first ever imap account which I created ( and deleted ) at the beginning .

By the way I deleted the first imap account from outlook and from the C:\Users\Xuser\AppData\Local\Microsoft\Outlook ,,,,

what to do else ????

A:Can't Recieve IMAP outlook 2010 Mails , errors x8004102A , x80041050

Hello and welcome to SevenForums.

Take a look at this thread:

Outlook Hotmail Connector users see error (0x8004102A) :

regards,
David

6 more replies
Answer Match 73.92%

Hi there,

like the subject says. Since I've been using my iPhone 4 with unified inbox for quite a while now, it is a bit annoying to keep switching between IMAP inboxes in outlook 2010. POP3 accounts are fine, all mails can go to one favorite inbox, but IMAP accounts work differently, by the look of it. The same was in outlook 2007, but I was wondering if there was a plug-in or extension of some kind that enables to use just one inbox?

You help will be greatly appreciated.

Thanks

A:Unified inbox for multiple IMAP/exchange accounts? [Outlook 2010]

Is this what you are looking for:
Set Up Single Inbox Folder For All Accounts In Outlook 2010






Quote:
Launch Outlook 2010 and from left sidebar, select an account, right-click it and hit New Folder. From Create New Folder dialog, enter an appropriate name and click OK.

Now head over to Home tab and click Manage Rules & Alerts from Rules drop-down button.

From Rules and Alerts dialog, select an account and click New Rule.

In Rules Wizard, we will start off with creating a blank rule, click Apply rule on messages I receive and hit Next.

In this step of the wizard enable through the specified account option. From bottom of the dialog window click specified account and select the desired account from Account dialog window, and click OK.

You will see the specified account in the bottom of dialog window. Now click Next to continue

In this step, enable move it to the specified folder option, now click specified in the bottom of the window and select the Generic Inbox folder recently created, from new Rules and Alerts dialog.

You will see the folder name in the bottom of the window. Click Finish to end the wizard.

It will bring you back to Rules and Alerts dialog, showing newly created rule. Click OK to apply this newly created rule.

For associating this folder with other accounts, repeat the whole procedure to direct all mails from multiple accounts to Generic Inbox folder. On receiving emails, you will see all the emails in the... Read more

9 more replies
Answer Match 68.04%

I have recently created an additional email address in Outlook 2010 and since then have been intermittently getting a pop-up window as soon as I start Outlook 2010 which prevents me doing anything and places a red X on the email icon in the bottom task bar.

The pop-up window says "Your IMAP server closed the connection" and gives me "OK" and "Details" tabs.

If I click OK it gives me the "No - you can't do that" tone. If I click Details I get;

Account: (email address)

Internal login failure. Refer to server log for more information.
Protocol: IMAP
Server: mail.aanet.com.au
Port: 143
Error Code: 0x800CCCDD

I then can't do anything to exit from the pop-up window or Outlook 2010 except to use Task Manager to stop OUTLOOK.EXE*32.

Any ideas on how I can prevent this from occurring?

I'm running Windows 7 64 bit and have only basic computer skills.
 

A:Solved: Outlook 2010 - "Your IMAP server closed the connection"

Update.

Turned out to be a network problem.

All fixed.
 

1 more replies
Answer Match 67.62%

Hi everyone!I'm so bad with this tech-lingo so I'm going to try my best to explain this.XP Guardian 2010 somehow got onto my computer and is causing all those problems people are talking about.I am unable to run Malwarebytes' Anti-Malware.Could someone please read my HijackThis log and tell me what to delete?Thank you so much!Logfile of Trend Micro HijackThis v2.0.2Scan saved at 4:36:32 PM, on 3/1/2010Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v8.00 (8.00.6001.18702)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Common Files\AOL\ACS\AOLAcsd.exeC:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exeC:\PROGRA~1\AVG\AVG8\avgwdsvc.exeC:\WINDOWS\system32\bgsvcgen.exeC:\Program Files\Bonjour\mDNSResponder.exeC:\Program Files\Executive Software\Diskeeper\DkService.exeC:\Program Files\Java\jre6\bin\jqs.exeC:\Program Files\Dantz\Retrospect\retrorun.exeC:\Program Files\... Read more

A:XP Guardian 2010: I need to know what to delete on my "Hijack This" log. Please help!

Hi,please provide a new log from OTL:We need to create an OTL ReportPlease download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.In the custom scan box paste the following:CODEnetsvcsmsconfigsafebootminimalsafebootnetworkactivexdrivers32%systemroot%\system32\*.dll /lockedfiles%systemroot%\Tasks\*.job /lockedfiles/md5starteventlog.dllscecli.dllnetlogon.dllcngaudit.dllsceclt.dllntelogon.dlllogevent.dlliaStor.sysnvstor.sysatapi.sysIdeChnDr.sysviasraid.sysAGP440.sysvaxscsi.sysnvatabus.sysviamraid.sysnvata.sysnvgts.sysiastorv.sysViPrt.syseNetHook.dllahcix86.sysKR10N.sysnvstor32.sysahcix86s.sysnvrd32.sys/md5stop%systemroot%\*. /mp /sPush the button.Two reports will open, copy and paste them in a reply here:OTL.txt Will be openedAs well as a scan from gmer:Please download GMER from one of the following locations and save it to your desktop:Main MirrorThis version will download a randomly named file (Recommended)Zipped MirrorThis version will download a zip file you will need to extract first. If you use this mirror, please extract the zip file to your desktop.Disconnect from the Internet and close all running programs.Temporarily disable any real-time active protection so your security programs will not conflict with gmer's driver.Double-click on the randomly named GMER file (i.e. n7gmo46c.exe) and allow the gmer.sys driver to load if asked.Note: If you downloaded th... Read more

2 more replies
Answer Match 67.62%

I can't delete any folders in outlook 2010! as soon as i try and move or delete a folder it says folder is full even if it is empty?
 

A:I can't delete folders on office 2010!

9 more replies
Answer Match 66.78%

Is there a mechanism in Word 2010 (and also Excel, perhaps) which allows me to DELETE the document I'm currently viewing?

I'd imagine it would be under the "File" menu if it existed, but I've not found it so far.

An example of its use: I prepared a document of things to take to a reunion. My PC was still on when I got home, displaying the list (which I'd saved, as I went along). I didn't know what I'd called the document, and I wasn't certain where I'd filed it, but I know I wanted to delete it.

A:How to delete the current document in Word 2010?

Of course you can't delete open files!
But you can hover over file->open to see the last files you opened. Open the one you want. Do a fake "save as" to see the folder it's in.

Now you know the file name and location, so delete it in windows file explorer

3 more replies
Answer Match 66.78%

but
Actually, is that priorly I entered regedit.exe and unfortunately deleted smth, after some of my progs stopped existing, when I pressed word, it had started its figurings out, and retarted, restarted, restarted, it gives me only a few minues to work after what it restarts, I think I need to delete icrosoft 2010, but HOW??? when I enter to uninstall program it says that word now is changing and I have to wait! HELP!!! SOS!!!

A:Doesnt delete Microsoft Office 2010!

Hello there, and welcome to the forums.

1st of all, what were you doing inside the registry? Windows registry is NOT to be accesed by the average user.

Can you restore to a point where you didn't have this problem? let's say a week ago?

You most likely will need to delete Office 2010 the hard way with Revo Uninstaller

Revo Uninstaller Pro - Uninstall Software, Remove Programs easily

But before that, what did you delete on the registry? which lines? do you have a registry backup? maybe from a 3rd party app. (CCleaner, Auslogics Boostspeed)?

Again, people should NOT mess with Windows Registry without knowing what to do in there

4 more replies
Answer Match 66.78%

I have a hire/return form/subform. The form is frmHire, the subform is frmHireSub.
Multiple items can be hired under the same HireID, and I can also return ALL items at once.

But, different items have different hire periods (over night and weekly) so not all items are due back at once.

To be able to see what items are currently on hire, when "Hire" is clicked the records are appended to another table "tblOnHire" and when all items are returned they are deleted from "tblOnHire".

All hire details are retained permanently in tblHire and tblHireDetails. tblHireDetails lists each seperate item that's been hired out and has a yes/no field titled "Returned". There is a yes/no field on frmHireSub which uses the "Returned" field as it's control source.

I tried using a query to delete the record(s) that had "Return" checked on both frmHireSub and tblHireDetails from tblOnHire but neither worked, they returned an error asking for the table to delete from.

How do I delete record(s) from one table, based on check boxes on a form that are based on a table?
 

A:Solved: Access 2010 - Delete Record If

8 more replies
Answer Match 66.78%

New laptop
just installed kis 2010 and it has found worm that it cannot delete.
Details as kis found them are:
Object:
C:\Driver\SETUP\01Vga\XP\D...\NvColor.ex_//NvColor.ex
Virus:
Worm.Win32.AutoRun.blju

As requested, in the 'read before posting' I have run all the scans and reports copy them below, attaching the attach file.

i am a true novice but can follow clear directions accurately if you can help me to remove this, please.
THank you in advance for your time.

HIJACK THIS LOG...........
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 9:25:18 PM, on 9/2/2010
Platform: Windows 7 (WinNT 6.00.3504)
MSIE: Internet Explorer v8.00 (8.00.7600.16385)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskhost.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\BisonCam\BisonHK.exe
C:\Program Files\Synaptics\SynTP\SynTPHelper.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Kaspersky Lab\Kaspersky Internet Security 2010\avp.exe
C:\Program Files\Windows Live\Messenger\msnmsgr.exe
C:\Program Files\Hotkey\Hotkey.exe
C:\Windows\system32\wuauclt.exe
C:\Windows\hh.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Google\Google Toolbar\GoogleToolbarUser_32.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Windows\system32\taskhost.exe
C:\Windows\system32\SearchFilterHost.exe
C:\Users\Admin\Desktop\HijackThis.... Read more

A:kis 2010 found worm unable to delete

attached attach.txt file
 

2 more replies
Answer Match 65.94%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Enterprise, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5 CPU U 520 @ 1.07GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3891 Mb
Graphics Card: Intel(R) HD Graphics, 1721 Mb
Hard Drives: C: Total - 305142 MB, Free - 243716 MB;
Motherboard: LENOVO, 2985F8G
Antivirus: ESET NOD32 Antivirus 4.2, Updated and Enabled

Hi,

I hope you can help me.

I am trying to find a VBA code to identify text by its RGB colour, and then delete it from the document. With this in mind, I am currently trying to edit a code I found online which changes text from black RGB (0,0,0) to red RGB (255,0,0). I thought I could use the same concept but to just delete the black text instead of changing it’s colour.

I am a beginner and it is just not that simple for me. Does anyone have any suggestions?

Thanks in advance!

Brigitte
 

A:VBA and Word 2010: Trying to identify text by RGB colour and delete it.

Hi

You can do this using the in-built Find/Replace in Word.

click on Replace
click on "Format" (at the bottom of the replace screen)
Click on "Font"
Click on "Font Colors"
Click on "Custom"
Change the RGB settings to 0,0,0
Click on OK twice
Click in the "Replace" box
Click "Replace All"

You can record all of these steps in a Macro
Code:
Sub Macro1()
'
' Macro1 Macro
'
'
Selection.Find.ClearFormatting
Selection.Find.Font.Color = wdColorBlack
Selection.Find.Replacement.ClearFormatting
With Selection.Find
.Text = ""
.Replacement.Text = ""
.Forward = True
.Wrap = wdFindContinue
.Format = True
.MatchCase = False
.MatchWholeWord = False
.MatchWildcards = False
.MatchSoundsLike = False
.MatchAllWordForms = False
End With
Selection.Find.Execute Replace:=wdReplaceAll
End Sub

Try either of these on a copy of your document in case something goes horribly wrong.
 

1 more replies
Answer Match 65.94%

Ok so I am using Word 2010 and I have a document template that has textboxes in it for placing photographs in. Simple enough to insert a picture into the textboxes, BUT what happens if I want to remove or delete a picture from one of the textboxes because I have made an error choosing the wrong photo or something? It deletes the picture AND the textbox! Surely there is a way (aside from using the undo button, which is not always practical) to be able to remove the picture and leave the textbox behind.

Please help!
 

A:Word 2010 textbox and picture delete issue

Word is not the 'friendliest' to work with but I cannot reproduce it here.

I put a textbox in a document and a picture in the text box, just click the picture, press delete and choose a new one to insert (when in the textbox) no problem.

I attached 2 documents, one in 2003 and the same saved as 2007/2010

Maybe the textbox frame is too tight around the picture frame so when you think you selected the picture, you selected the texbox frame, then of course all is deleted
 

3 more replies
Answer Match 65.94%

Hello to all you smart cookies out there.

I have been doing a bit of research about the topic but either I'm not finding it or I'm oblivious to the answer that is in front of me.

Here's the set-up: I am administering to a number of MS exchange accounts inside of a small company. The problem that I am having is with 2 of our "bulk access" accounts (e.g. 2 email accounts that 8 people/devices have regular access to).

Something in this setup has resulted in several thousand conflicts and sync issues being generated (about a hundred each day). The reason for this , I am fairly certain, is because of the number of people/devices that are synching with the account every second. That I cannot temporarily resolve.

What I would like to find out, however, is whether these emails are all duplicates and can therefore be safely removed, or whether some of these might not have made it into the inbox...

For the personal email accounts, it is a fairly simple process to see if emails are missing or present, but manually cross-checking for these 2 accounts is not possible. Here are some numbers to help you understand the problem:

Averaged over both accounts (WARNING ? THIS MAY MAKE YOU CRINGE)
Sync Issues
-> Conflicts: 4567 (generally about 4 per "real" email)
-> Local Failures: 67
-> Server Failures: 0

The fact that I'm getting no server failures tells me that the problem is entirely local.

Anybody know if these will all just be duplic... Read more

More replies
Answer Match 65.1%

I am trying to create a delete query to delete all parent records (DGRP) that does not have any child records (CLLI) but I get the error "Could not delete from specific tables".

DELETE DGRP.*
FROM DGRP LEFT JOIN CLLI ON DGRP.DGRP = CLLI.DGRP
WHERE (((CLLI.CLLI) Is Null));

Can this be accomplished?
 

A:Solved: Access Delete Query to Delete Parent with no Child Records

9 more replies
Answer Match 64.68%

Logfile of Trend Micro HijackThis v2.0.2Scan saved at 10:59:13 AM, on 8/25/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16512)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\Program Files\Intel\Wireless\Bin\EvtEng.exeC:\Program Files\Intel\Wireless\Bin\S24EvMon.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Grisoft\AVG Anti-Spyware 7.5\guard.exeC:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exeC:\WINDOWS\system32\DVDRAMSV.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Common Files\McAfee\HackerWatch\HWAPI.exeC:\PROGRA~1\McAfee\MSC\mcmscsvc.exec:\program files\common files\mcafee\mna\mcnasvc.exeC:\PROGRA~1\McAfee\MSC\mcpromgr.exec:\PROGRA~1\COMMON~1\mcafee\mcproxy\mcproxy.exec:\PROGRA~1\COMMON~1\mcafee\redirsvc\redirsvc.exeC:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXEC:\Program F... Read more

A:Cant Delete Mcafee Or Make It Run....freezes Up With White Screen. Browser Wont Let Me Delete Emails Or Even See Certain Sites....

Hello verycarolina, Sorry for the delay. We have many logs backed up. McAfee antivirus is very difficult to uninstall, as they (McAfee) does not want malware to uninstall it. You call uninstall it using the McAfee Consumer Products Removal tool (MCPR.exe)How to uninstall supported McAfee consumer products using the McAfee Consumer Products Removal tool (MCPR.exe) Summary: This document explains how to remove McAfee Consumer products using the McAfee Consumer Products Removal tool. This option should only be used as an alternative if you cannot remove your McAfee product through the normal Add/Remove Programs. Affected Products: McAfee Security Center McAfee VirusScan McAfee Personal Firewall Plus McAfee Privacy Service McAfee SpamKiller McAfee Wireless Network Security McAfee SiteAdvisor McAfee Data Backup McAfee Network Manager McAfee Easy Network McAfee AntiSpyware Affected Operating Systems: Microsoft Windows 2000 Professional Microsoft Windows XP Professional Microsoft Windows XP Home Microsoft Windows Vista NOTE: This tool is not compatible with Microsoft Windows 98 or ME. Description Running the McAfee Consumer Product Removal tool (MCPR.exe) removes all 2005, 2006, and 2007 versions of McAfee consumer products. Solution Download and run the McAfee Removal tool NOTE: Always be sure to uninstall your McAfee product through Add/Remove Programs, first. The following steps should only be taken if uninstalling through Add/Remove Programs has failed. Download the remova... Read more

2 more replies
Answer Match 64.68%

I have Win XP Pro and Home.

I uninstalled Zone Alarm security software. The zlavscan.dll extension won't uninstall. Zone Alarm has given me multi instructions and it still won't go away. They last responded that is was safe and downt worry about it. How can I get rid of this extension...it's interferring with another security system download.

Tamarra
 

More replies
Answer Match 64.68%

I am afraid to delete my call history Will this delete my contacts as well?

A:If I delete my call history on my Windows 8 phone will this delete my contacts also?

Deleting call history doesn't delete Contacts on Windows 8 phone

2 more replies
Answer Match 64.68%

I am trying to delete songs from my itunes that I do not like anymore to make some space on my laptop. I know that sometimes when I delete songs it pops up saying "delete from hard drive?". I want that to pop up always, but for some reason it doesnt sometimes. My friend said that it will only do that if you have itunes organizing the folders. So i deleted my preferences and made it so itunes will organize my music. However I still delete songs and they dont delete off my hard drive. I was told that the songs have to be in the itunes music folder, I had alot of songs in there, but some in a different folder. I thought maybe I could move the other folder into the itunes music folder, and then it would work. However now when I go to play some songs it says the file cannot be found. Anything I can do? HELP ME!

A:How do I delete songs from hard drive when I delete them from my Itunes library?

Because you moved the songs from where iTunes was used to looking for them they will not play - when each song comes up and the error message you described comes up you can click yes to find them and browse for them (you should know where they are if you put them all in one folder). This will re-establish the link to the song's new location in iTunes.
If you have lots to do, it may be faster to delete all your songs from iTunes (not your computer) and set up the folder on your computer properly - one My Music folder with all your music in there - they can be further sorted into subfolders if you want to. Then open iTunes, set the Preferences to "Keep iTunes folder organised" and "copy files to iTunes folder when adding to library" and import all your music from your My Music folder again.
When you get new music by whatever means and import them to iTunes it will automatically place a copy in the iTunes "iTunes music" folder for you and always know where to look for them.

2 more replies
Answer Match 64.68%

Somehow some time back I set Word 2010 to show a date on every saved page that I have. The date shows up on the bottom of the page on the left side. It also shows on a saved document for an envelope that I made. I want to delete that particular date stamp but when I open the envelope, I cannot figure out how to delete it on this item.
Any suggestions would be appreciated.
 

A:Solved: Word 2010 Want to Delete a Date Stamp on one Saved Item .

11 more replies
Answer Match 64.68%

I have seen multiple question and answers in forum regarding this GPO to Delete User Profiles Older than a Specified
Number of Days on System Restart not working or some hotfixes, in my environment it is working on all required systems in one OU. But in some PCs it is not deleting the parent folder and some folder under appdata.
like c:\Users\DomainUser\Appdata\local\abc\efg\
so the profile data like my documents, pictures, desktop etc are deleted but folder structure "\DomainUser\Appdata\local\abc\efg\" in efg folder is empty, which creating confusion during Audit and physical check.

Thanks, Anuj.A

More replies
Answer Match 64.26%

Hello all,
This is the second computer I have experienced this issue on... I am not sure what setting I may have unknowinlgy enabled to create this fiasco.. hopefully you all have an opinion.

All of the sudden, my backspace key will not delete text that I have highlighted in Word 2002. My delete key will, but my backspace key won't.... this is a pain in the rear since it takes a lot more effort to use to use the delete key than the backspace key, and using backspace has been ingrained in me since childhood.

I did not change any settings or turn on any features (unless it was unknowingly)... I was not messing with options or settings recently at all, as well. I am completely stumped as to how this happens... as mentioned before, it is the second computer to do this to me.

Any advice would be greatly appreciated.

Thanks a ton!

Joe
 

A:Word 2002 - Delete Key Won't Delete Highlighted Text

8 more replies
Answer Match 64.26%

Gentlemen [and Ladies ?]

I have three questions.

My Operating System is Windows XP Professional SP2.

1. I read the reply to PURE TRAGEDY's post of the 7th April 2005 and immediately uninstalled my AVG7 anti-virus scanner. Norton System Works antivirus and AVG7 antivirus had been running side by side for six or seven months and nothing untoward had happened, but when I read the dire warning in the advice to PURE TRAGEDY, AVG7 got the chop.

I would like to scan with Norton in SAFE MODE but do not know how to do it. When I had Windows 98SE, my computer used to jump into SAFE MODE without me doing anything positive to cause it to do that. I had no idea how to get out of SAFE MODE so a neighbour helped. I cannot remember what he did. My computer was in SAFE MODE for two days on one occasion because I did not dare mess about with it.

So, an explanation, in 'dummy' language, exactly how I can get into SAFE MODE, and scan my computer for viruses with Norton, and how I can get out of it, will be appreciated.

2. I have Norton System Works, Ad-Aware SE Personal, Spybot S&D, Spyware Blaster. Spyware Guard, and 2-Squared in my computer. The programmes are updated and used every day. Norton detected a virus which AVG7 did not, so I feel happy with the Norton security.

I have considered installing Microsoft's Beta Anti-Spy and malware application but my friends throw up their hands in horror when anything with Beta is mentioned. "Don't do i... Read more

A:XP queries - SAFE MODE; BETA, and delete or not delete

I too am a tidy person, to the degree I can be, oldsoldierThe reason you had no untoward results having both Norton & AVG running was probably due to how they were configured to run.If both were set to to scan continously and be auto-updated constantly, then some problems may have surfaced.You may simply delete the Grisoft folder.You need not open any of the files before you do.That folder was essentially for backups to what the AV software did for you.Without it's presence, or in light of your decision not to re-install it, those files in that folder are useless.I should mention I uninstalled Norton in favor of AVG because:1. Norton updates less frequently than AVG, and isn't effective against as many new variants as the Grisoft has been in the last couple of years.2. Norton costs more.3. Norton, when uninstalled, is also messy. It seems to me to require more system resources to do less for me. An opinion based on a couple years of observation, and reading countless HJT logs where it is installed and serious malware problems also co-exist. 4. Norton offers several products. I've had most installed at one time or another.I bought the System Works Suite in 2002. It deeply embeds into winXP when you use all the features of it, and slows the PC down considerably doing so. If you do not use a similar product, then you will not have similar experiences. The anti-virus aspect of it alone did prove IMHO to be marginally adequate.Microsoft Beta 1 is not anti-vir... Read more

2 more replies
Answer Match 63.84%

Hey,
 
This is a Sharepoint 2010 question. I have a list with a decent number of entries that is being displayed on a site page and is being filtered by a few different textbox controls. The problem is that when I click one of the list items after the list has been filtered the view/edit/delete controls are grayed out. I am the administrator with full control. Any ideas on why this is happening?

More replies
Answer Match 63%

I am trying to delete a large file that was used by PC Tools AntiVirus. I have uninstalled the PC Tools software, but a file remained. I have tried to delete it, but nothing I've tried has worked. The file is

c:\documents and settings\all users\application data\PC Tools\Temp

For some reason, the file is very, very large, and I don't understand what is going on with it. When I try to delete it, some members actually add space believe it or not (I have watched this happen). One went from a few K to 11 mb when I tried to delete it! Is there a "hard command" to delete this thing? I have "fired all my bullets". I am running AVG antivirus now to determine if a virus is involved. AVG runs for over 2 hours because of the size of this file. I need a "strong" command to get rid of this thing. Help would be greatly appreciated.

Thanks

More replies
Answer Match 63%

Hi, I think all my problems started when I installed a new McAfee security program three days ago and now I can't seem to get anything to work. My Yahoo mail acount will not delete any unwanted messages although I check the box and click on delete, nothing happens. I also lost all the names in my browser. Nothing appears when I click on it. I have to type each www. name in each time. I tried to send and E-mail to [email protected][/email], but it would not go. Maybe it would be better to uninstall the McAfee and restore my computer back to before I installed it. Please advise.
 

A:delete button will not delete unwanted messages

Well...I would agree about dumping the McAfee but since you paid money for it you will simply have to start reading the HELP files on how to use and configure it. Your problems are all because McAfee is not configured or over configured for your needs.

The program can be overwhelming to a novice computer user. If you want good anti-virus protection with a firewall, then see this: www.my-etrust.com/microsoft
 

2 more replies
Answer Match 63%

So fist i had some problems after some crashs, and then i enable safe mode though windows it self(msconfig) but then for shit reason win ask for passwords, it doesn't ask for PIN of other options when on safe mode....so i got stuck at that.....cause i never use psd, neither have used hotmail, on gmail for years....so i tryed to disable that dam thing, but by a mistake i type "bcdedit /delete {id}" instead of "bcdedit /deletevalue {id}" Now i have no boot for sure....of course....right after i press enter, and restart i realize it... i feel that on my nuts right after that hahaha

So, can i fix that? After that i'll need more help, but a diferent topic/post for sure i think....(some system files are corrupted, how to repair them and stuff like that) ...but fist this problem...

More replies
Answer Match 63%

I looked at my firewall events earlier and i saw a file had been trying to connect to the internet but had been blocked by my firewall. Whenever i install a program i am unsure of i block the exe file from connecting to the internet until i'm happy its a safe program. The file is "EFL1.4_Setup(x64).exe" and is the setup file for Easy Locker from XOSLAB.COM i had this program installed once but was not impressed so i uninstalled it, but the file i downloaded is still in my download folder.This is what is trying to connect to the internet,So rather than just delete it i thought i will shred it to make sure its gone. Comodo System Utilities deleted all the files that came with it eg the 32 bit file but it left this file to be deleted on restart,after a restart it was still there. I tried again,same result, I also have Comodo System Cleaner it said it deleted it but it did not,it just thinks it did,Glary Utilities will not delete it even if i run it as administrator (which i am anyway) it still tells me i don't have permission, Spybot secure shredder tells me i don't have permission. Slim Cleaner has a shredder & it says i don't have permission. I can't take ownership of it,if i try to take ownership of it through the properties & permissions etc i get denied access. MalwareBytes File assassin tells me i don't have permission. I am Administrator,& even so i tried running the shred programs as Administrator. oh!,this is a first, I just tried to upload it to V... Read more

A:Unable to delete a file,can't delete it can't shred it,

  
Quote: Originally Posted by Stever1


I looked at my firewall events earlier and i saw a file had been trying to connect to the internet but had been blocked by my firewall. Whenever i install a program i am unsure of i block the exe file from connecting to the internet until i'm happy its a safe program. The file is "EFL1.4_Setup(x64).exe" and is the setup file for Easy Locker from XOSLAB.COM i had this program installed once but was not impressed so i uninstalled it, but the file i downloaded is still in my download folder.This is what is trying to connect to the internet,So rather than just delete it i thought i will shred it to make sure its gone. Comodo System Utilities deleted all the files that came with it eg the 32 bit file but it left this file to be deleted on restart,after a restart it was still there. I tried again,same result, I also have Comodo System Cleaner it said it deleted it but it did not,it just thinks it did,Glary Utilities will not delete it even if i run it as administrator (which i am anyway) it still tells me i don't have permission, Spybot secure shredder tells me i don't have permission. Slim Cleaner has a shredder & it says i don't have permission. I can't take ownership of it,if i try to take ownership of it through the properties & permissions etc i get denied access. MalwareBytes File assassin tells me i don't have permission. I am Administrator,& even so i tried running the shred progr... Read more

2 more replies
Answer Match 63%

hi..

I have had an issue where some files won't delete.. while others take too long.. while others delete quickly..

The type of files i mostly deal with are in PDF format..

I have 6 Gigz of memory.. and i'm not running anything heavy in the background..

I know that this is a problem with Windows.. but i can't find a solution

Please help?

Uni
 

More replies
Answer Match 63%

Running Edge and can't delete certain Favorites Doesn't even want to try Any ideas?

More replies
Answer Match 63%

I want to use Find and Replace to delete all the links in a document. All the links are as text (e.g. http://...). I don't mean that the word Yahoo is a link to http://www.yahoo.com.I want to use wild cards to select the Whole link. I thought find http://* would select it all, but it only selects the http:// part of the whole link.I have checked the Use Wildcards checkbox.How do I select the whole link?I'm using Word 2003.

A:Delete all links, delete all that begin w/ http:

I hope you got the answer to this already, but if not..
with 'Use wildcards' checked, enter
http://*.com
in the Find what area.

You was on the right track, only needed to add the .com in there so it will continue looking to the end of the web address.

1 more replies
Answer Match 62.58%

does anybody know how getting rid of M office outlook?
thanks
 

A:how delete MO outlook

Depends if you are running Windows or Mac?

If WIndows, Control Panel - Add Remove Programs - Microsoft Office - Change
 

2 more replies
Answer Match 62.58%

Dumb question - I so not seem to be able to configure Outlook to delete the currently viewed message and move to the next message. I know where to find this setting in Outlook 2003 and found posts regarding this matter for Outlook 2007. But, for Outlook 2010, no luck. Please help.

Thx.

A:Outlook - Delete and next

Hello GRoston,

Welcome to Seven Forums.

Under Options/Mail. The very last item on the page. 'After moving or deleting an open item:'

Hope this helps.

Gary

3 more replies
Answer Match 62.16%

I am running Outlook 2000. There is a contact that is causing me problems. If I click to TO button when sending an email and I get to the M's of my contacts Outlook will close. I tried to delete this one M contact and it says that I don't have permission to do this. I didn't share any contacts with anyone. I only use 1 profile. How can I delete this contact? I am using Windows XP with Office 2000 professional. This problem has just started happening and I did not add this contact within the past couple of weeks.

I don't remember ever adding this contact.
Thanks,

Stufine
 

A:Can't delete Contact from Outlook

6 more replies
Answer Match 62.16%

After restarting my computer outlook will work fine the first time it is opened. However, if it is closed and reopened it will no longer allow us to delete mail. I found a post that suggested deleting the inbox.dbx file and I did so. It worked for a while and now it is not allowing me to delete mail again. I have deleted or moved all mail in the inbox folder to other folders and emptied the deleted items folder. Any Ideas??????

Thanks,

Paul

A:Outlook will not delete mail

Back up any mail you currently have in Outlook. Also back up your address books.
Uninstall Outlook, reboot, then reinstall.
Sometimes this simple procedure will work to resolve issues.

1 more replies
Answer Match 62.16%

Windows XP

Outlook won't let me delete sent messages. Wouldn't let me delete several other messages, but will allow 1 to 5 to be deleted at the same time. None, however in "sent messages" file
 

More replies