Tech Problem Aggregator

Outlook 2010 Error message "This data file has not been configured"

Q: Outlook 2010 Error message "This data file has not been configured"

All of a sudden I could not find my sent mails in the Sent Items Folder. I looked for help from the forums and got a suggestion to create another profile to test whether I can see my sent mails there. I followed the instructions but there was not enough to lead me through so I don't think I completed creating a profile. Then I got another suggestion to purchase the Registry Booster to clean up my registry. After I did that I was able to see my sent mails again.

However I still continue to see the Outlook Data File Popup with the message "This data file has not been configured. Select an existing file to configure or try the name of a new file to create". After I clicked "OK" then I got another pop up to prompting me to choose a file from the Libraries.Documents directory. I clicked "Cancel" then I got another pop up with "Properities for this data file must be defined prior to use". I clicked "OK" and then I got the Outlook Data File Popup and the same subsequent popups again. After clicking through I was able to start my Outlook but when use the registry Booster to scan I got more error messages. So apparently these errors from Outlook is mucking up my registry. Anyone has any idea about this problem? Please help. Your assistance is greatly appreciated. Thank you. Helen.

A: Outlook 2010 Error message "This data file has not been configured"

Hi Helen,

Firstly, you certainly do not need any registry boosters to solve Outlook data file issues - was this a recommendation made by someone, or was this suggested to you by an automated pop-up? If its the latter, is there any chance you could be infected by some sort of malware?

To solve the Outlook issue, do you know where your Outlook data file is being stored? Can you do a search on your computer for all files with this extension:

.pst

Post back here with your findings. Also, can you tell us about your current system : what anti-virus software are you using. I'm a bit concerned about this Registry Booster : generally speaking, in most cases you really do not need/want to be mucking with the registry at all.

Regards,
Golden

9 more replies
Answer Match 94.2%

I just installed Outlook 2010 on my new Samsung laptop running Windows 7 a few days ago (an upgrade from Outlook 2002 that I was previously using on my old computer running XP). My husband & I have 4 different email accounts, so I started configuring all of them on the new version & it all seemed to be working fine. Last night my husband moved our saved emails, etc., from our old computer to the new one. At first everything went smooth. All the stuff we still had on the old pc showed up in all the right places in our new inboxes. Once he was finished, we tested send/receive several times & it was all working fine. That is, until this morning...

After powering up the laptop & starting Outlook, I've discovered that all email accounts work EXCEPT our main account. This is the error message I keep getting:


Sending' reported error (0x8004010F) : 'Outlook data file cannot be accessed.'
Receiving' reported error (0x8004010F) : 'Outlook data file cannot be accessed.'

I used one of our other email accounts that work to send my husband an email showing him the error. He has no idea how to fix it & I have tried to find an answer online & can't. Can anyone (as if you're talking to a child) explain to me how to fix this problem? Thanks.

A:Outlook 2010 "Data File" error

Welcome to SF kimbojo

Have you tried a repair?
Office 2010 - Perform Repairs
http://office.microsoft.com/en-us/pr...010357402.aspx

Also do a Scan pst.
http://office.microsoft.com/en-us/ou...010075831.aspx

4 more replies
Answer Match 86.1%

Hello All,

I have my GoDaddy email account setup as an IMAP using Outlook 2010. Intermittently when I receive emails, they will go straight to the 'Outlook Data File' and completely erase them from any of my other email clients. I will even be literally reading an email on my iPhone and before I can finish the email disappears to my office computer if outlook is running. Any way to fix this?

Thank you!
 

A:Outlook 2010 - Data File "Stealing" Emails

Elegantly simple my friend - just make sure Outlook is not running when you are using a different device to read emails with.
 

2 more replies
Answer Match 83.4%

New Dell 530 computer, new Office Pro package installed by Dell. Everything works pretty smoothly so far, but every time I open Outlook (not Outlook Express), I get a message "A data file did not close properly the last time it was used and is being checked for problems. Performance might be affected while the check is in progress." I can still check email, appointments, etc, but it works in the background and sometimes interferes with the keyboard or mouse. And if the program is open long enough, it reports a message "data file check complete." It's not a huge issue but is very annoying. Any ideas?
 

A:2007 Outlook "data file" message

Hello Judy. Here is an article that explains the error message and provides a resolution to prevent it from occurring again.

Hope that helps.

-- Goku
 

1 more replies
Answer Match 79.2%

Hey TSG,

STATISTICS:

Windows XP SP2 with all updates
MS Office 2003 with all updates
Windows is set up with 3 user profiles - error only occurs on "administrator"

PC appears to be clean: I run SPYBOT and AdAware regularly, and CCleaner and Registry Mechanic occasionally. I use fully updated Trend Micro PC-cillin Virus Protection and firewall.

PROBLEM:

For no apparent reason, when I open Outlook I get the message "Data file 'Personal Folders' was not closed properly. The file is being checked for problems" .....pause

...and then Outlook closes. (NOTE: any recommended solution that requires Outlook to be open cannot be applied). I have researched the Web forums and one suggestion was that the .pst file is too large. I back up the .pst file every night and last night's file was 352 meg which does not seem to be too big.

HELP!

Thanks,

kurley

PS: I can get e-mail on-line
 

A:Outlook 2003 - Error "Data File 'Personal Folders' was not closed properly"

Well the good news is that your .pst file is not too large... the maximum limit for previous versions of office .pst files was 2 GB... usually corruption occurs before this point though (post 1.5 GB is about the point where it becomes prominent), and with the new office 2003 4TB is the theoretical limit of your PST files.

One thing to try... move the location (into another folder) of your .pst file, so that the association of the outlook and the pst file is broken... see if this allows you to open outlook... if so try to remap to the .pst file in its new location, close outlook and see if the issue has been resolved or if it fails to open again.

If you are able to open outlook (with the pst disconnected) and the previous step has failed try using the import/export function and see if you can import your .pst file from the old (corrupted one) to a new one...

There are utilities out there that are able to check the integrity of .pst files, but right at the moment... it escapes me as to which are the recommended scanners.

Other suggestions are welcome...
 

3 more replies
Answer Match 107.94%

I do not know what I did. When I opened a message it open it "Message"; now it opens in "File". How can I get it back to open in "Message"?

A:Outlook 2016 - Message opens in "File", not "Message"

If you minimized the Ribbon, this caused it. Open a message and maximize the ribbon.

1 more replies
Answer Match 104.58%

In one office decided to reinstall Windows 7, became ill after working virus.
As expected, copied documents from the desktop to the disk D, format screw and reinstall Windows and a bunch of programm.
Then came the user of this computer and was horrified to find that it has no data in Outlook 2010, and he had already warned that it has a post office.
In general, the file Outlook.pst stayed somewhere on disk C, has already lost.
D drive someone 2 years ago made a backup copy of this file - there is 5GB.
But it is very necessary for the letters of 2012 and 2013.
How can I restore the whole thing? In general, is it possible?

A:"How to recover data, Outlook 2010?"

You might be able to try one of the data recovery programs that are out there. But that is not a guarantee that it will work to recover those letters. This is why you and any computer user essentially should have a backup device of some sort to fully backup your drive(s) at all times; even if you manually make a backup you should still use a backup device. Im not totally familiar with the the data recovery programs that are out there that actually work; so you may have to google search and see what comes up.

1 more replies
Answer Match 104.58%

Using Windows 7 Enterprise Edition (64 bit) and Office 2010. When dragging a message from mail to the Calendar (in the lower left under the folder list) to create a new meeting/appointment, the calendar dialog will "pop under". How do I get the calendar dialog box to grab focus?

Thank you
-Neal

A:Outlook 2010 - When dragging message to calendar, dialog "pops under"

If you still interested, could you please create and post a screenshot.

3 more replies
Answer Match 104.16%

I am using Microsoft-Office 2010 Version 14.0.7109.5000 on a laptop running Windows 7 Home Premium (x64) Service Pack 1 (build 7601). I use Outlook 2010 as my email client for two IMAP Gmail accounts.

I have checked the box within Outlook 2010 options "When replying to a message that is not in the Inbox, save the reply in the same folder". This feature is not working and all sent emails are filed in "Sent Mail".

A:Outlook 2010 "When replying to a message..." is not working

  
Quote: Originally Posted by malon015


I am using Microsoft-Office 2010 Version 14.0.7109.5000 on a laptop running Windows 7 Home Premium (x64) Service Pack 1 (build 7601). I use Outlook 2010 as my email client for two IMAP Gmail accounts.

I have checked the box within Outlook 2010 options "When replying to a message that is not in the Inbox, save the reply in the same folder". This feature is not working and all sent emails are filed in "Sent Mail".


Dear malon,

This was a known issue with Outlook 2010 which has been resolved with the HOTFIX.

Find as Google : Outlook 2010 hotfix package

I hope that it will help you

2 more replies
Answer Match 101.64%

I am not interested in having a "personal assistant" who reports my activities and searches back to Microsoft like some kind of Cold War era embedded spy. As far as I am aware there is nothing "Cortana" does that can't be achieved using other existing OS functionality or dedicated software.... Can Cortana be completely fenced in to share NOTHING with MS?
(If not, I'll give her the sack by turning it off.....)

Follow on question - I really thought I declined all the intrusive functionality when I installed Windows 10. In my first attempt at installation I got a looking glass where the Cortana icon is appearing now on the Task bar. Did I accidentally select the wrong option at install?

A:Can "Cortana" be configured to share NO data with Microsoft?

Hey Hannele,

You could disable Cortana to do so.

Cortana - Enable or Disable in Windows 10

1 more replies
Answer Match 101.22%

Normally when you try to send an email from a link from firefox via "file->send link", your default email program automatically opens assuming it's not already open. If Outlook 2010 is already open, no problem; it works fine. If it's closed, I get the error below about a dll error telling me to reinstall outlook 2010. if I manually open Outlook, I can then email the link.

If I insert the Office 2010 disc to try a repair, I get an other error (below) saying 2003 was not uninstalled properly and to uninstall it before I can do the repair (gotcha-catch22-can't get there from here, etc....). I see nothing in add/remove to indicate there is a trace of Office 2003 remaining. I can send screen shots of the registry if desired, but see nothing there indicating 2003 was not removed fully, but could be wrong. I'm fine with surgical edits if necessary.

I've been running Office 2010 for a year with no other problems beyond this and it's possible this existed from day 1 and it just took me a while to notice it..

Any suggestion on how to either fix the dll issue directly, or deal with the 2003 uninstall hopefully without uninstalling 2010 and starting over?

Thanks.
 

More replies
Answer Match 99.54%

Hi,

Please help. I have seen a few post about this error but nothing I have tried has helped.

Each time I open outlook a balloon pops up my task bar with the following message:

Microsoft Office Outlook
A data file did not close properly the last time it was used and is being
checked for problems. Performance might be affected while the check is in
progress.

Then the message quickly dissapears before you can even read it properly and outlook closes automatically.
 

A:"A data file did not close properly" when Outlook 2007 is opened

6 more replies
Answer Match 99.54%

1) Anyone experienced this oddity?

I simply cannot find the FILE >>> "data file management tab"

I can't find any way to add the option to the "FILE" menu, eg in the OPTIONS >>> CUSTOMISE field.

2) As Sysadmin, I occasionally have to tidy up several .pst data files, which I connect to, and can see in the "folder view" pane, but I can't find a way to rename the individual "outlook today" main folders (option is greyed-out... I can only re-name the sub-folders)
Thanks for any help you can give!
 

A:Outlook 2000 sp3: No "data file management" option!

Hi blast9,

e.g. to get to the Compact Now option:

Right Click on the Outlook Today folder in Outlook ande select Properties.
Advanced.
Advanced.
Offline Folder Settings.
Compact Now.

I'm used to the Data File Management Option also, but had to find the above on a different machine I was using.

BR
Hew
 

1 more replies
Answer Match 99.12%

Hello,

Burned jpg's to CD, but when I viewed them using ACDSee, the bottom half of most of the pictures are black - with a message that the data stream is corrupt.

I recall seeing that some of them were like this before I burned them to the CD, but many more of them are now affected.

Would it be better to save them in a different format? Could it be because they were put through DCEnhancer before being saved, or because I edited them through ACDSee?

This is a real pain as half of my pictures are useless.

Thanks for any thoughts on this.

Bye,
Penny.
 

A:Fujicam - "Data Stream Corrupt" Error Message

Just bumping this query - Has any one any ideas, please.

Thanks,

Penny
 

3 more replies
Answer Match 99.12%

Hi there,
I've searched a lot on the web for the answer to this problem, but none that fit my particular situation.

Recently this error message has started popping up when I use word 2007 on my home computer:

"Word has lost data due to a bad network connection or missing floppy. Documents relying on this data are going to be saved and then closed"

However, despite its threatening intent, I have never lost data. Its bloody annoying because it stops me typing, I press 'ok' and it goes away, only to pop up at a seemingly random time later.

From my ultimately fruitless googling, I have an idea that it is related to me syncing with an external hard drive, and then using this external hard drive at my work computer. When I do this I save directly to my external drive. Unfortunately I have no choice because my work computer crashes if I try to sync it with my hard drive.

I don't know if my suspicians are right or wrong, but I really hope that somebody can help me with this problem!

Thanks for your time.
 

A:word 2007 annoying error message: "...lost data due to a bad network..."

7 more replies
Answer Match 98.7%

Apologies if this isn't the correct forum but im having problems saving spreadsheets in excel. When saving to a specific folder on my hard drive I receive the error message "Data Error (Cyclic Redundancy)". It doesn't happen every time but most of the time. It only happens in Excel and only happens when saving to one specific folder. Does anyone have any ideas about the problem?

Thanks.
 

A:"Data Error (Cyclic Redundancy)" - message received when saving in Excel 2003

The hard drive has a bad sector under that folder?

Test the hard drive with the manufacturer-provided utililty to confirm.

The bad sectors can be marked unusable with the chkdsk utility to make Windows work around the bad areas, but you should consider repacing that drive.
 

2 more replies
Answer Match 98.7%

I am on a Sony Laptop w/ Vista printing to Dell 2130cn and recieve this printer error "PDL Request 016-720 Data Violation"

Does anyone have a solution to this? I am unable to print from the web or pdf. I can print docs.

I just had a tech here for an hour and he had no idea.The printer is fine - I am able to use other computers to print. He did MS updates and reinstalled printer. There were no solutions by Google search. Has anyone else had this problem and how to fix.

Also, I do have a HP C7280 and it just prints blank pages from the internet with no error messge.

Thanks - Katy

A:"PDL Request 016-720 Data Violation" - Error Message

Welcome
Here is a list of problem codes
Follow 16-720
Understanding Printer Messages

8 more replies
Answer Match 98.7%

When i try to install xp sp2, I keep getting "the data is invalid. xp sp2 could not be installed" error message.
I have re-installed windows and tried installing sp2 from CD, and tried the downlooad from the microsoft website, both with the same result.
Can anybody make any suggestion on what i can try next.
Many thank's Brian.j
[email protected]
 

A:Installing xp sp2, I keep getting "the data is invalid" error message.

Brian.j said:

When i try to install xp sp2, I keep getting "the data is invalid. xp sp2 could not be installed error message".
I have re-installed windows and tried installing sp2 from CD, and tried the downlooad from the microsoft website, both with the same result.
Can anybody make any suggestion on what i can try next.
Many thank's Brian.j
[email protected]Click to expand...

Welcome to the forums

http://support.microsoft.com/xpsp2getinstall

did you read the above? That looks like a good starting point...doc
 

1 more replies
Answer Match 98.7%

I didn't post this in the games section because it appears to be an XP-related problem.

I recently installed a game called Flatout which is a car-racing game. For the past few days it's been working perfectly and I've completed about half of the levels. Yesterday, however, as the next level was loading, it got to about 30% and suddenly crashed showing the following error message: "ZLib error (-3): incorrect data check".

I tried applying the patch but this made no difference whatsoever.

I have no clue as to what this error message means and I don't fancy losing all my progress by reinstalling the game... Only to work my way through the levels again to potentially have the same problem.

Does anyone know what this error is how it can be resolved? Thanks for any help!

A:Error message: "ZLib error (-3): incorrect data check"

Sorry to bump this thread but it went onto the 3rd page without being answered.

3 more replies
Answer Match 98.28%
A:BEX error "wininet.dll" Outlook 2010 won't load

try the following link and see if it helps ya out any to resolve the issue:

BEX error, Outlook 2010 won't load

3 more replies
Answer Match 97.86%

Hello,

I am trying to get my Outlook 2003/2002 Notes Connector to work with Lotus Notes 5.0.11, but I keep getting the following error when I open Outlook: "The local message file can't be accessed. The file is already in use by another user."

Things I've tried to fix this:
1) re-install Notes client
2) re-install Outlook Connector
3) re-install Outlook 2003
4) deleted all but first 4 lines in notes.ini
5) changed the name of my .nst file
6) deleted and recreated Outlook profile (numerous times)

Any help would be appreciated!
Here is the output of my MSOCLog:

<<## ## ##>>MSOCLog Header Size : 1298
Log Date: 4/22/2005 - 03:26:48
Microsoft Windows NT Version 5.1.2600
C:\Program Files\Common Files\SYSTEM\MSMAPI\1033\MSOC32.DLL
OtoN Version: 2.0.4007.0
C:\Program Files\Microsoft Office\OFFICE11\OUTLOOK.EXE
Module Version: 11.0.5510.0
Auto Download Mode : Download Body
Slow Connection Mode ont get Body On RAS
OtoN Languages :1033;
Office Languages :3081;
Current MUILanguage:0
OutLMime.dll Version: 11.0.5510.0
Mso.dll Version: 11.0.5606.0
InetComm.dll Version: 6.0.2800.1441
NST type: UNICODE
<<b44 22 03:26>> ======================================================
<<b44 22 03:26>> Log Date: 4/22/2005 - 03:26:48
<<b44 22 03:26>> C:\Program Files\Common Files\SYSTEM\MSMAPI\1033\MSOC32.DLL
<<b44 22 03:26>> ======================================================
<<b44 22 03:26>> ABProviderIn... Read more

A:Outlook Connector for Lotus Notes - "local message file can't be accessed"

Does anybody know anything about the IBM Notes connector (or a URL for it)? Does it use the Outlook interface?

Thanks,
JB
 

1 more replies
Answer Match 97.44%

Hi,

I am using Windows Vista.
Office 2010 purchased.
I can not recall my emails. The message I'm getting is "The attempted operation failed. An object could not be found".


Hosting Exchange and I checked with the hosting co. who says they support the functionality. Quote: This function is a default feature from Microsoft. All features that Microsoft has enabled by default are enabled by us, the default settings aren't changed
by us."

How to fix it?


Thank you in advance for any information :)

Regards,

More replies
Answer Match 96.6%

Hello Guys and Girls,

My wireless internet connections are currently set to a manually configured status, but this means I am having problems connecting to other wireless connections with free (ie unsecured) connections. I have tried going to properties and ticking the "Let Windows configure my wireless network settings", but I get a dialogue box coming up telling me that not all of my changes have been made.

Any ideas? Thank you in advance.

Sukita
 

A:Solved: Changing wireless connection status from "Manually Configured" back to "Automatic"

Why don't we start with the make/model of the wireless router in use, as well as the wireless adapter or laptop brand. Also, what version and patch level of Windows do you use?

If you have XP-SP2, you can set the machine back to installation defaults using the following procedure.

TCP/IP stack repair options for use with Windows XP with SP2.

For these commands, Start, Run, CMD to open a command prompt.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log
 

3 more replies
Answer Match 96.6%

How can I work around the following rror message "cannot copy file. cannot read source file or disk". I'm using Windows XP on a Gateway GT 4016

A:error message "cannot copy file. cannot read source file or disk"

Get a new disk or provide a whole lot more details about what you're trying to do and what program(s) you are trying to do "it" with.

1 more replies
Answer Match 95.76%

I have Windows Vista and I installed Starcraft. It installed fine, but when I run it, it gives me an error saying "Data File Error" and that it couldn't get data from the cd, even though the cd is in the drive. I tried reinstalling and compatibility mode, but I can't get anything to work. Any ideas? Thanks.
 

A:Starting Starcraft results in "Data File Error"

bump
 

1 more replies
Answer Match 95.34%

Does anyone know how to repair .qbw files? I don't really want to pay $500 to have someone fix it, and I'm sure its fairly simple.

Quickbooks does not give me the repair option, I need to find a recovery software or repair it manually.

Thank you for your help. =)
 

A:Error: "Not a QuickBooks data file or is damaged"

7 more replies
Answer Match 95.34%

After reading this site and searching the net, I tried to rename the user, backed up files, started from scratch and tried to import the old files....still no success...I need some actual walk me through it help.....I went to the mail icon in the control panel...set-up a user then associated a data file, in the email section, I tried to switch the default file to the one I wanted....still no luck....Please, if you are very well knowledgeable about Outlook 2003, I need help....I have some business files which I am trying to restore and business contacts to contact so I'm in a bind because Outlook is not working....Stoe

I have a Toshiba Laptop running Windows Vista 32 bit Home Edition.
 

A:Solved: Outlook 2003 Error Message, "can't open the default folders"

Hi stoe2000

Is this a continuation of the same problem from this thread?
http://forums.techguy.org/business-...open-settings-change-default.html#post8031158

Does Outlook 2003 open for you?
 

3 more replies
Answer Match 94.92%

When I click Send & Receive in Outlook, I receive the error message "The Operation Failed." There is no message "An object could not be found."

I had not added or deleted a new profile or e-mail account.

Thank you for any assistance.
 

A:Outlook error message "The Operation Failed"

maybe your mail server is down? when the error happens, can you look at the error message in more detail ?
 

3 more replies
Answer Match 94.92%

Howdy!

Yesterday, I started getting the error message below whenever I try to send an email from my Outlook Express.

Response received is: 550-Message rejected because pool-71-96-2-xx.dfw.dsl-w.verizon.net 550-(DELL2KGWP61) {71.96.2.xx]:1523 blacklisted at list.dsbl.org see

550 http://dsbl.org/listing?71.96.2.xx



If you go to http://dsbl.org/listing?71.96.2.xx <--- IP altered for safety. It tells you that this IP has been blacklisted as one that maybe is sending spam. Okay, that ain't me or anyone in my household! It also says, contact your ISP so... I call Verizon DSL but they tell me it's actually a MSN Outlook issue. Verizon says, the IP it references is one that Outlook makes... creates... or something... when it sends out my email. Huh?! So...



I call MSN only to be told that I have to go to Dell since they made the machine. So... I go to Dell and they say everything that Verizon says is hogwash but it'll cost me $100 for them to fix it. Ugh!! So...



Does this look... sound... smell... familar to anyone??? If any mods need the actual IP lemme know, I'll PM it to you.



Could this have ANYTHING to do with the Microsoft Service Pack 2 I dowloaded a couple days ago??



I hope... Read more

More replies
Answer Match 94.92%

I have had my vista pc and my windows 7 (basic) net book setup to let me share files (through an Netgear DG834PN Route) for around 18 months with no problems.

However as of 3 days ago I can no longer do this and non of the network tools can fined or solve the problem. I can uses the internet though my rooter, see my vista pc on the network as well as the media streaming (windows one) thing.

I can also access my net book hard drive from my pc no problem and transfer/delete files as well?

When I do try to connect the following error message is given:
"Error code: 0x80070035
The network path was not found"

How can I fix this?
 
P.s. I know windows 7 basic has not create home group ability, but it worked with the one I made on vista. I can not afford to upgrade my copy of windows 7 so that is totally out of the question.

P.p.s I am a dummy at this stuff.

I have tried Enable NetBIOS over TCP/IP, no joy!!

A:network error message: "Error code: 0x80070035". No file shareing help

Welcome to SF,

Firewall might be the problem, you'll have to configure it to allow access to "trusted zone".
On some Firewalls or Security Software you might need to completely uninstall them.

1 more replies
Answer Match 94.5%

My system crashed recently and I have had to restore everything. I reinstalled Outlook 2007 and was able to restore my PST file from a backup I had using the genie backup product. All my files and folders are now restored.

When I click on the send/receive button, I get this message "The operation failed. An object could not be found"

I deleted my email setup account (I'm downloading from my att account) and re set it up using the instructions on the att site. I also ran the 'repair' function off the Office CD and did the Office diagnostics.

Any suggestions?
 

A:Solved: Outlook 2007 wont send/receive - error message "operation failed"

Can you give us the exact message.
Are you saying you did a clean install where you formatted and partitioned the drive?
 

3 more replies
Answer Match 94.5%

I only get the BSOD when playing games, not any specific game, but any, sometime i can go a whole week of playing games and have no BSOD at all, and somedays 5 minutes after a game is running it will BSOD everytime, all day long. When I try to Run any game like GW2 Or Inquisition my pc turns into Bluescreen with an error CRITICAL_PROCESS_DIED or KERNEL_DATA_INPAGE_ERROR ..I've already Updated all my drivers and reinstalled all my games, also run chkdsk /f and memtest with no problems.


This is the screen:

Also this is my dump config:
(note that i have windows 8.1, not 7)

Still it doesn't create any File or Folder and when the BSOD happens the blue screen say that its collecting info but it doesn't get off 0% .
It's the same with the critical process died it just goes to the blue screen saying its collecting info but it also doesn't get off 0%.

I'm completely baffled with what to do as the blue screen view hasn't picked up anything and i cant find the dump files.
 

A:"Critical Process Died" & "Kernel Data Inpage Error"

Hi BTW, welcome to the TSG Forums....

You may find this from the MS Community helpful. If Greek is easier to understand than this article then come back to this Forum and someone will help you.

http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/windows-81-bsod-kernel-data-inpage-error-and/b67ae41a-9228-4462-9c53-d1f5d115f784

T.
 

1 more replies
Answer Match 94.5%

I have Outlook 2010 and Windows 8.1.  When attempting to open e-mail in Outlook 2010 or documents in Word I get the following error:
"Outlook could not create the work file.  Check the temp environment variable."
I've read several Microsoft KB articles and several forums on this issue.  According to these articles, This problem occurs when the Cache string value in the registry doesn't point to a valid directory.  The solution provided is to:
Locate and then click the following subkey:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
Right-click the Cache key, and then click Modify.  Then modify the sting value to:  %USERPROFILE%\AppData\Local\Microsoft\Windows\INetCache
When performing this step, the cache value was already set to the value above.  I attempted to overwrite by typing the same value for the string, but that did not solve the problem.  I attempted to change it to a different value, save it, and then
modify it to the correct value and save it, but that did not solve the problem.  I also attempted to go in to the INetCache folder under Users\"user"l\AppData\Local\Microsoft\Windows\INetCache, rename it, recreate a new folder and copy all subfolders
into it, and that did not solve the problem.  
I am out of things to try from the user forums I have researched.  Appreciate any insight anyone might have on how I can solve this problem.

More replies
Answer Match 94.08%

I am trying to install a C++ Redistributable package and am encountering the following error dialog:



I am also encountering a similar dialog when I try to install the latest Silverlight plugin for IE9.

I'm running Windows 7 Professional, 64 bit.

Can anyone please assist.

Cheers

A:"Unable to find a volume for file extraction" Error Message

I found one fix:




Quote:
Update: I was able to figure out a hack to get through. If I enable the UAC, and then explicitly run each program with admin rights, it asks for permission, then the programs run without a hitch.

So... Since I hate UAC, how do I fix this?


Found here: Installers failing... - Tech Support Forum

1 more replies
Answer Match 94.08%

I've seen posts (e.g., this one) about getting the error message "This file is not in a recognizable format" when trying to open files in Excel. Apparently this can occur for various reasons, but an online search didn't turn up an answer for my own situation, so I'm posting the solution I came up with.

In my case, the error message appeared when I installed Excel 2007 on the same machine as Excel 2000 and tried to open 2000. To eliminate the problem:
Close Excel.
Go to Documents and Settings > Application Data > Microsoft > Excel > XLSTART. The folder contains a PERSONAL.XLS and PERSONAL.XLSB file.
Assuming Office 2000 and Office 2007 have been installed in separate directories in Program Files:
- Move the PERSONAL.XLS file to Program Files > Microsoft Office > Office > XLStart
- Move the PERSONAL.XLSB file to Program Files > Microsoft Office 2007 (or however it's named) > Office 12 > XLSTART.
Don't just copy the files--move them. The original folder should be empty.
Restart Excel 2000.

 

A:Solved: Excel error message: "This file is not in a recognizable format"

Thanks for that, but Microsoft recommends you do not have two versions of Office installed on the same computer - then the error would not occur.
 

2 more replies
Answer Match 94.08%

I have a Dell Pentium 4 (1.7MH) running Windows XP SP-2. When I trie and save a file from the command prompt using an application such as a text editor, or word processor (dos based) I received the above message. There is a box (from MS Edit) with buttons "retry" "cancel" "help". I clicked on help and this information was displayed:

Edit is unable to create or access the specified file, which might be due to the following reasons:

» You may be trying to create or write to a file on a drive that is read-only, such as a CD-ROM or a read-only network drive.
» You may be trying to overwrite a file that is read-only.
» You may be trying to access a file that is locked by another user or program.
» You may be trying to read or write to a directory name.

The situation is this: I can only save a file if I rename that file (using save as.) I've made sure that this happens with or without long file names. I've have 3 hard drive installed and the same thing happens on all the drives and in root and sub directories. I've used different DOS based programs in CMD.EXE console including MS Edit; Wordperfect 5.1; and PEDIT (among others) all showing the same behavior.

There is no problem in Windows based programs. I have not changed my environment variables, etc. The behavior was sudden and it's still continuing.

I must rename the file in order for it to be saved, then copy it at the prompt to the file name that I really want. I'... Read more

A:CMD.EXE ERROR MESSAGE "Edit is unable to create or access the specified file"

You need to enclose the entire path and file name in quotes if there are any spaces in the path or file name.
 

2 more replies
Answer Match 94.08%

i had a iso file of windows 7 ultimate.
i want to format my laptop..so i thought of creating a bootable dvd.

but when i was selecting the iso file of windows 7 ultimate...it is giving an error message as "invalid iso file"

can any one help me how to fix this??

A:"invalid iso file" error message in windows 7usb/dvd tool

Hi,

When are you getting this error message, have you tried to burn the ISO to a DVD?

Regards,
JDobbsy1987

5 more replies
Answer Match 94.08%

I'm trying to repair Windows XP on my laptop (because I got the blue screen of death and a bunch of my drivers don't work) by booting it from the original Reinstall Service Pack 1 disk that came with my laptop. I click setup, and then repair, get partway through and get the "files asms needed" message.

I tried this fix, which was posted on one of these forums previously:
"The machine is not communicating with the CD-ROM.
When the message appears, type: Shift+F10 to enter a command session.
Type: regedit.exe at the prompt.
Highlight the HKEY_LOCAL_MACHINE entry.
Go to the File menu and choose Load Hive.
Then, load %Windir%\System32\Config\System.sav
Give it a short name that you will remember, like "Test".
Then, find this key:
HKEY_LOCAL_MACHINE\Test\ControlSet1\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Delete UPPERFILTERS and LOWERFILTERS keys.
Do the same for ControlSet2 and any other numbered ControlSet keys you see.
Exit regedit."
I do the first five steps, no problem. My problem is that when i look for the key, under ControlSet001, there is no such key -- no control or class folders, just a services folder. I make the changes under controlset002 and 006, then exit regedit. The error message remains. I click Ok and nothing happens. I click "cancel" and it gives the setup a fatal error. I've also tried changing the drive to d:/ or e:/, with no luck.

Help! How do I get past this?
 

More replies
Answer Match 94.08%

I am still using Excel 97 on Windows XP. I have been keeping a daily log in Excel for two years now. Yesterday I tried to open the file to make an entry and I received this message; "2006-07 Log book.xls: file format is not valid." Any idea what could have happened and how to retrieve the file. I checked all the forums I could find on the subject, but none helped. I have a lot of valuable info in that file and would sure hate to lose it. Thanks for any help.

Regards;
countrydaddy
 

A:Solved: "file format is not valid" error message

9 more replies
Answer Match 94.08%

Dear Fellow Members,

It has been some time since I have been able to get back on line, even briefly. Let me begin with a description of the circumstances which prompted this post.

I received a series of 32 .rar downloads (made using a good, high speed connection and under optimal conditions), which contain what I believe is a full DVD (sent as an .iso file) of a cultural event from the person who made the recording, of an event in which he was a participant, and for which he owns the rights. This does not relate to any sort of illegal file sharing.

When I tried to extract the .iso file, the file extracts fully and (apparently) completely (the counter goes up to 100%), but at the end (only after the file has extracted 100%) I consistently received the following WinRAR error message:


"CRC failed in the encrypted file xxx.iso (wrong password?)."


The password was correct (I have had experience that when the password is actually incorrect, the opening sequence will not initiate in the first place); the resulting .iso file (saved because I asked WinRAR to "keep corrupted files") is the full size of the file which was sent. According to what I have been able to read on line (and, again, from past experience), WinRAR should be able to indicate which of the files is corrupt during the extraction process (I have subsequently tested the archives several times in an attempt to find what is wrong), but no problem with any of the files has been i... Read more

A:WinRAR Error Message "CRC failed in the encrypted file"

CRC error means that the file is unreadable and or corrupted, probably just the last tidbit. You can try to open the ISO file with MagicISO but if Alcohol didn't open it, this probably won't either.

2 more replies
Answer Match 94.08%

My laptop isn't starting, I get the blue screen with the following error message:

Stop: c0000218 {Registry File Failure}
The registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or alternate its is corrupt, absent, non writable

I've had a look through some related posts here and tried:
-starting using the last working configuration settings - No Effect
-starting in safe mode - No Effect
-booting from the original Windows XP CD and in the recovery console running the chkdsk /r command - currently 3hrs in and at 65% complete

Hopefully this will work, however if not I am going to try the manual steps guide written by poolboynatur (http://forums.techguy.org/windows-nt-2000-xp/682884-stop-c0000218-registry-file-failure.html)

My questions are:
1)I don't know if my Windows XP Home edition is OEM Installed, if it is will this stop me being able to perform the manual steps in the guide?
2)Will following the manual steps to recover route delete any of my personal files/folders/pics?
3)I'm concerned about all my personal files/folders/pics etc being deleted or overwritten, obviously I can't start my laptop to access them now to perform a backup to external hard drive, is there a way of performing a back up before I do any of the manual steps to recover?

Thanks in advance
 

A:Error Message "STOP: C0000218 (Reg File Failure)....."

http://www.aumha.org/a/stop.php
0xC0000218: UNKNOWN_HARD_ERROR
A necessary Registry hive file couldn’t be loaded. The file may be corrupt or missing (requiring either an Emergency Repair Disk or a Windows reinstallation). The Registry files may have been corrupted because of hard disk corruption or some other hardware problem. A driver may have corrupted the Registry data while loading into memory, or the memory where the Registry is loading may have a parity error (turn off the external cache and check the physical RAM).

0xC0000218: UNKNOWN_HARD_ERROR {KB 156640} Win NT, Win 2000
http://support.microsoft.com/?kbid=156640&sd=RMVP

How to Recover from a Corrupted Registry that Prevents Windows XP from Starting {KB 307545} Win XP (includes error messages that \WINDOWS \ SYSTEM32 \ CONFIG \ SYSTEM or \WINDOWS \ SYSTEM32 \ CONFIG \ SOFTWARE is missing)
http://support.microsoft.com/?kbid=307545&sd=RMVP
How to Troubleshoot Registry Corruption Issues {KB 822705} WinNT 4.0, Win 2000, Win XP Pro, Server 2003 (computer will not restart due to corrupt Registry hive)
http://support.microsoft.com/?kbid=822705&sd=RMVP
 

1 more replies
Answer Match 94.08%

When I try to move a folder into another folder (sub-folders into the main "MY DOCS" folder, I get the error message: "The action can't be completed because the folder or a file in it is open. Close the file and try again."

NO, no other folders are open; went to task manager and made sure. No backup running. I've tried a web search others have had this issue. The suggestion was to empty the temp folder, but this didn't help.

Any advice? This happens for ANY folder I try to dump into the main one.
 

More replies
Answer Match 94.08%

I'm using version 2004. A friend sent me two files (generated by someone other than him).
When I tried to open the files in version 04 (which is what I use)... I've got the same error message (drawing file is not valid).

Any help would be appreciated. Thank you.
 

A:Solved: Error message: "drawing file is not valid"

Hi LesageJo, and welcome to TSG.

There is no guarantee I will have an answer, but it would help if you told us exactly what software you are using. A version number, without a name doesn't help us much.
 

1 more replies
Answer Match 94.08%

Hello Toshiba support

I have a Toshiba Satellite SA60 - 122 MODEL NO. PSA60E - 09505XPT and I need to upgrade its BIOS

I went to http://www.toshiba.eu/support/drivers/laptops/ and choose "Archive" (see screenshots attached for all options), and it returns 2 results... both give

500 - Internal server error.

There is a problem with the resource you are looking for, and it cannot be displayed.

Direct link for http://support.toshiba-tro.de/tools/...a.asp?ID=39020

Is there a problem with your server? Can you fix it so I can download the file?

More replies
Answer Match 94.08%

HELP!!!

Every time I download a winamp skin from their site it comes up with the error message stated in the subject after it has downloaded 99% of the file!

When downloading, the file is temporarily placed in here:

"C:\Documents and Settings\username\Local Settings\Temporary Internet Files\Content.IE5\6j8XMZO1\filename"

Is it just because I am not logged in as an administrator, or is it something else???

How can I overcome this problem???

Cheers )

GeoffTek
 

A:Error message "Access to the specified device, path, or file is denied" when download

It is indeed probably because you are not logged in as the Admin. When you download skins for Winamp, they self extract and install to the proper directory. Sounds like the skin is coming down OK but when it goes to extract and install, it stops as you don't have access.
 

3 more replies
Answer Match 94.08%

I am using Excel 2007 on Windows XP. I have been keeping a daily log in Excel. Yesterday I tried to open the file to make an entry and I received this message; "Expense.xls:: file format is not valid." Any idea what could have happened and how to retrieve the file. I checked all the forums I could find on the subject, but none helped. I have a lot of valuable info in that file and would sure hate to lose it. Thanks for any help.

For ur Refernce, am attaching the file.
 

A:Solved: "file format is not valid" error message in excel 2007

10 more replies
Answer Match 94.08%

I have a Windows XP '98 Desktop with 256 MB.
Could not open a PDF document (3446KB) which had error message: "There was an error opening this document. A file I/O error has occured" Please advise how to repair this PDF document, Thanking you!
 

A:How to repair PDF document that has an error message " A file I/O error has occured"

Does your version of Acrobat reader or pdf reader support the document's format?
Can you attach the pdf file to see or does it contain sensitive data.
Have you googled for this error?
 

1 more replies
Answer Match 93.66%

Yesterday when I switch on my computer, it automatic diskcheck on my E disk. I have 3 HDD, which is C: (My main partition, installed Windows on this HDD), D: is for all my game files (Installed games) and E: is for all my music, movies, game installer, software etc.

So back to the point, when I switch on my computer, and get to the "Windows is Starting", and it stuck right there for about 5-10 minutes. Firstly, I have no patient so I restated the computer, and second or third time also have the same problem. So I choose to wait patiently, after 5-10 minutes, it have a black screen for about 1 to a few minutes, then it started the disk check on my E drive.

Once the process started ( I have total 234240 file record as shown on the disk check ) and continue to file record 800, it started to give me message stated "File record segment 800 is unreadable, File record segment 801 is unreadable" and so on, and sometimes it continue to go smoothly without the message, but not long or sooner it will appear again. Almost the whole process I get these message which worried me, and I wonder if my hard disk is failing badly and unable to recover.
It continues to finish the process and attempt to fix the bad sector. And after that it successfully log onto Windows, so I can use it normally again.

But I notice my E: HDD cannot access and the "My Computer" screen is loading very slow, and sometimes goes unrespond. One thing very weird is that after I few hours ... Read more

A:Hard disk is failing? Error message"File record segment is unreadable"

The "File record segment xxx is unreadable" error is an indication of failing hard drive. You should backup the data from this drive before it's too late.

Next, run some diagnostic testing on the failing hard drive; most HDD manufacturers have the diagnostic software available from their website. Software from Seagate will work with most brand.

If this drive would be mine, I'd just get a new one, the drive certainly will not get better...

9 more replies
Answer Match 93.66%

Whenever I try to open one of my "Quark" files, I get the following error message: "Bad File Format [-70]". Does anyone know any tricks on how to recover this file, or is all hope lost in this case? I've done a little research, and the concensus is that this is possibly a serious error message, with little to no hope of recovery. I just wanted to know if anyone else has come across this, and if so, what you did to fix it, if anything. Thanks guys!
 

More replies
Answer Match 93.66%

I have 3 HD's running. Two (NTFS) internal and one (FAT32) external.

A 300GB (NTFS) with about 14GB of free space.
A 60GB (NTFS) with 9GB of free space.
A 160GB (FAT32) with 149GB of free space.

I am getting this error message while trying to transfer a 4GB Movie from the 300GB HD to the 160GB HD saying "Error copying file or folder, There is not enough free disk space". Obviously there is enough disk space on the target drive for the movie but for some reason or another it doesn't think so. Windows also recognizes that there is the correct amount of space available, it only says there isn't when I try to transfer.

I tested transferring with other files and it works fine, its just that file. I also tried transferring it to the 60GB HD and it worked without any problems.

My questions are:

Is there something wrong with the file?

Is it that there isn't enough room in a temporary folder for it to transfer a file that big?

Is it the fact that they are different file systems?

Is there something wrong with my HD?

Or is it something that i'm not thinking of?

Thanks for your help. Sorry if this post is in the wrong section, I thought it was the most appropriate.
 

A:XP "Error copying file or folder" message

Thankfully you didn't try "moving" it, sometimes from doing this it vanishes from the source (as wanted) and never gets to the destination (due to out of memory error)

I've seen this myself, it's to do with system resource on your PageFile amount of Ram being used and the CPU coming in trying to process it all.

In most cases I have run CCleaner first then copied the large file(s) across without fuss.
It's just all the temp files together and Windows thinking that memory is low when it's just the processing of this memory in a temporary location (being %temp% usually)
 

25 more replies
Answer Match 93.66%

Quark 5.0 "Bad File Format [-70]" error message. Whenever I try to open one of my "Quark" files, I get the following error message: "Bad File Format [-70]". Does anyone know any tricks on how to recover this file?
Please help
Thanks
Phixul
 

More replies
Answer Match 93.66%

WINDOWS XP. SOME PHOTO FILES WILL NOT OPEN WITH IRFANVIEW.
GET MESSAGE CAN'T READ FILE HEADER.
mugels, thank you
 

More replies
Answer Match 93.66%

I am experiencing a problem that only recently started occurring. While connected to the internet, it works fine for the first 2.5 hours. After that time my internet connection dies, and when I click on my wireless adaptor utility to check the status I get the following message: "The IPHLPAPI.DLL file cannot start - Check the file to determine the problem." - and can no longer connect to the internet unless I reboot. Each time I do reboot, however, it is fine for another 2.5 hours and once again the internet connection dies.

I have tried removing and reinstalling my network adapter and software (Syntax USB-400), renamed and reinstalled IPHLPAPI.DLL, scanned my system using SpyBot, Ad-Aware and Norton Antivirus (which are all up to date) and found nothing wrong. I have also followed the suggestion in the MS support link article 823256 which pertains to this issue (although the 'symptoms' in this article refers to 'installation of MS broadband networking hardware') but this has not helped either. It reacts as if there is a set timer causing it to crash every 2.5 hours. Otherwise the system functions perfectly. Is there a resolution anyone can think of that I may be overlooking?

Please advise as this issue is becoming very frustrating.

Thanks in advance for your assistance.
My system specs are as follows:

System
Host Name : DELL
Domain : MSHOME

Processor
Model : Intel(R) Pentium(R) II
Speed : 333MHz
Performance Rating : PR400 (estimated)
Typ... Read more

A:"Iphlpapi.dll File Cannot Start" error message

7 more replies
Answer Match 93.66%

Hi;
Had a sudden inability to go much further than a third or forth-level download on ANY given webpage and then PC would seize-up, requiring "cont+alt+del" in order to get freed-up. Thought perhaps I picked-up a bug of some sort during a recent google search, and went immediately to Panda and Trendmicro to perform both virus as well as malware scans. While the Panda scan was loading-up, I received the following error message....

... " DoPatch....dll reports error....Error "C:\WINNT\patch.utp"....unreadable or not a patch file..."

Was able to complete both scans. Nothing found other than tracking cookies.

I then did a file serch for the above and located it. It was installed TODAY apparently, and not by me, within minutes of the problem starting.

I'm guessing someone/thing slipped this patch into my WINNT file or modified it while I was doing the google search, so I have included a HJT scan below.

Hope this all makes sense and ties-out to something. Any help would be genuinely appreciated-
thanks
Webz

__________________HIJACK SCAN BELOW__________________________
Logfile of HijackThis v1.99.1
Scan saved at 12:42:23 PM, on 5/11/2005
Platform: Windows 2000 SP4 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\system32\LEXBCES.EXE
C:\WINNT\syste... Read more

A:"DoPatch" error message - "dll reports error" causing pc to seize-up (HJT attached)

Bump for HJT expert
 

1 more replies
Answer Match 93.66%

every time i try to open one of this folders a window apears with this content
cant have acces to C:\Documents and Settings\Mike\Local Configuration\{one of these folders} acces denied
this affects my IE i cant download nothing thru IE all my files on that locations i cant set dispaly pictures on WINDOWS LIVE messenger and all thinks that has anything to do with those folders
any suggsestions or idea
hope you can help me
pd ive scanned my computer and its all clean also i cant install windows XP serivce pack 2 im kinda stucked :/
 

A:cant open "temprorary files" "aplication data" "program data"

11 more replies
Answer Match 92.82%

I've tried frequently documented solution regarding FsDepends where
changing the start reg key from a value of 3 to 0.... doesn't work as this is a common symptom to a different problem.

When using partdisk or the disk management gui I get the error message: "A virtual disk support provider for the specified file was not found"
eg partdisk select vdisk file=c:\my.vdh
There are some statements that some Intel Management Control Software might be knobbing this feature... does anybody know what this installation is doing so that the process can be reversed?
Any other suggestions?
Cheers
Simon

More replies
Answer Match 92.82%

Hello, 
One of my users is having this issue. She is is using Windows 7 Pro x64 bit with Internet Explorer 11. Everytime she tries to access a specific website IE stops working and gives the following error message:
create file mapping failed (6), wc_registry_mmap_name
No one else is having this issue when visiting the same website on their computers, it only happens to her. I reset IE's settings on her computer but that didn't fix the issue. I can use a different web browser on her computer to visit the website, so I
know the website isn't the problem. 
Any help would be greatly appreciated. Thanks!

More replies
Answer Match 92.82%

Hello all & Happy New Year
I would like to eliminate this annoying error message "another program is currently using this file" that pops up when I try to open some programs. One of which is Act 2000 a database program, this particular program also doesn't shut down properly. I also get this error message occaisionally when I open these programs - Calyx Point & Mozilla Firefox, however with these it is not every time as with Act.

A:Error message "another program is currently using this file"

I've used ACT and have experienced it's bugginess first hand. Can't really help you with your problem, but did want to let you know you are not alone and also ACT doesn't give much (free) Tech Support. However, they do have some FAQ's on their web-site, so it might be worthwhile to try there.

http://www.act.com/support/technicalsupport/

3 more replies
Answer Match 92.82%

OK, this is going on the last 1-2 days. I have a normal internet connection, and the pc seems to run normal, BUT:
I open a Word file, I write for about 1 hour (during which time I can save text) and then I get a message saying "Word cannot save file - wrl (some numbers) error"... and then a txt file is created in My Docuents, that contains only ???? And then my work is just gone... (for now I close Word and save my work in a flashdrive every 5 minutes...)
I have F-Secure software, a legal one, it did not find any virus or spyware. Help please!!!!
PS. I own an Acer laptop, and run XP.

A:Help! I keep getting a message "Error - cannot save file"

in Word go to Tools/Options/Save. Make sure Always create backup copies is unchecked as well as Allow Fast Saves. If this still fails, then go to Start/Run and type appwiz.cpl. In Add Remove Programs. Highlight the Office program and hit the Change button. Choose to Repair Office. If that still gives you problems then choose to Uninstall Office and then reinstall it.

1 more replies
Answer Match 92.82%

When one of the programs I use tries to generate a particular PDF report, I get this error:

"This file does not have a program associate with it for performing this action. Create an association in the Folder Options control panel"

At the top of the window showing this error message it shows:

C:\DOCUM-1\ADMIN-1\LOCALS-1\Temp\ast3DO.pdf

I've gone to the control panel and the .pdf file is associated with Adobe Reader. There is obviously something I am missing.

A:Error message: "This file does not have a program associated with it..."

Right click the file and choose Open With... Choose Adobe Reader from the list Put a check box in always associate this file with this program. You can also open Adobe Reader choose File/Open and browse to the downloaded file.

6 more replies
Answer Match 92.82%

I'm getting the error message "This file does not have a program associated with it for performing this action.
Create an association in the Folder Options control panel" whenever I try to open anything.

I'm not able to open any applications. I can open my computer and those folders but can't open any files inside them.
The only thing I can open is the internet and I did that by typing the site url into the run box.

I had that stupid xp anti virus 2011 on my computer and was trying to remove it
but I goofed in the registry editor and deleted something I shouldn't have and that's when the trouble started.

Now when I try to open the registry editor, I get the message that says "Windows cannot open this file.... to open
this file windows needs to know which program created it...."

Can someone tell me how to fix this so I can open all my programs normally again?

A:"file does not have a program associated with it" error message

Hi zoel_222 and welcome to TSF.

Firstly we need to fix your ability to reassociate file types for programs. Please follow this link for File Association Fixes for Windows 7. You will want the EXE one.


Quote:




Instructions
To fix the association for a particular file type:

1. Download the corresponding fix from the above table. (Use Right-click – Save as option in your browser to download the fixes.)

2. Unzip the file and extract the .REG file to Desktop.

3. Right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the Import option from the File menu, to merge the REG file contents.

Note that you need to be an administrator to apply these fixes.




Then, you will need to start a new thread in the ' Virus/Trojan/Spyware Help' section and give then all the details they require to help you.

1 more replies
Answer Match 92.4%

I have an entire column of data that I need in one cell. When combined I need each piece of data to be surrounded by " " and a , between each one.

151
183
2001

results = "151","183","2001"
 

A:Solved: Excel Column of data place in one cell with "data", "data" results

ASAP's "Merge row data" ("Columns and rows" category) will do 99% of the work for you.

http://www.asap-utilities.com/

(edit: "entire column" -- do you mean full from top to bottom? )
 

2 more replies
Answer Match 92.4%

Hello,
I am getting the following error when moving files on the same drive or from one to another:

"Error Moving File or Folder
Cannot remove folder (insert folder name here): The directory is not empty."

This is fairly common (once or twice a month) and it occurs usually with folders containing many subfolders when being moved by explorer gui "Move the selected items", or ctrl-x, ctrl-v . Repeated attempts through the same process seems to move the folders, but the errors increase as the concentration of stubborn folders increases.

There are no event viewer logs corresponding to these errors. (eventvwr.msc: system, or application)

I would have thought this would be a common problem, but extensive searches came up with nothing... so either it is rare, untroubling to others, extremely easy to fix, or my search queries suck. =)
I am going to run Checkdisk to make sure all is well there, and I will repost the likely failure.
 

A:"Error moving file or folder" "directory is not empty" one file left

Occasionally when I am deleting a file, it is difficult, I have to go through process explorer, search for the thread that is strangely(?) associated with that file in explorer (no reasonable dependencies could be linked, nor is the file being viewed), and kill the thread before deletion.

any thoughts?

Thanks =)
-J
 

3 more replies
Answer Match 90.72%

Microsoft Updater says I have a critical update (KB2286198) to install but it fails and gives the message: "WindowsUpdate_80246007" "WindowsUpdate_dt000".

I've tried a couple of things that MS Support suggests but they don't work and don't seem to really apply to this particular error message. Searching for the error code 80246007 hasn't yielded anything yet that works.

Any ideas?

Gateway GT5622
x86 based PC
Processor Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz, 1800 Mhz, 2 Core(s), 2 Logical Processor(s)
Operating System Name: Windows Vista
Operating System Platform: NT/2000/XP/Vista
Operating System Major Version: 6
Operating System Minor Version: 0
Operating System Build Number: 6002
Service Pack Description: Service Pack 2
 

A:Update Error Message "WindowsUpdate_80246007" "WindowsUpdate_dt000"

6 more replies
Answer Match 90.3%

Hope this query is in the right section -tried to use my LDS 1881 England Census CDs last night - but having problems with the Viewer.

I have V4 which up to now has worked perfectly - tried to re-install it
and I keep getting "Failed to extract file "Dll_ini" from binary table"
error message.

BUT no problems on my laptap which has the Viewer installed from the
same CD.

Have had a few problems with computer of late - it was in the workshop
3 weeks ago because of some corrupt Windows files - could that be the
problem?

Grateful for any advice, suggestions as to what to do!
 

More replies
Answer Match 89.04%

Wanted to resurrect an older thread, but its closed :
http://forums.techguy.org/windows-xp/652638-error-moving-file-folder-directory.html

Please read completely before responding.
I am a 30 year IT pro, most of it as a programmer. I am the geek in charge of a tech non profit org in Hawaii. www.HawaiianHope.org
so yea.. i have at least half a clue.

Here is the deal.
In doing drive copies, data recoveries, etc... when we are moving a mass amount of data from one drive to another we run into this problem a lot.
"Error moving file or folder" -- "directory is not empty"
If you restart the move, it will continue on and keep going, restart enough times and eventually it will move all directories.

I think its a programming issue with windows and wonder if anyone has a work around ?

I have a suspicion that the copy process is getting out of sequence. That it is trying to move a folder before it actually emptied it. Possibilities are :
1) windows forgot its place in moving through and navigating numerous sub directories and it is having a problem with “recursive calls.”
2) Computers with hyper threading or dual core processors are spawning the movement of files across multiple processes, and some are getting ahead of the other.
3) It did actually move the file, but the cache or something in memory has not updated, or the full data write has not completed yet before it tried to move the directory. (delayed write)
Yes, you can copy and then delete the old... Read more

A:"Error moving file or folder" -- "directory is not empty"

This is a known issue. It is by design.

As you may know, moving is in its essence an unsafe process. It would be better to use the actual sequence of copy and then delete.
 

3 more replies
Answer Match 88.2%

Help!!!!

I have a laptop Toshiba, Satellite A45 and I can't get on the web, or load most of my programs due to an error message saying "one touch can't enumerate". When I tried to load the Maxtor One Touch CD to remove and re-install, I got the error message, "can't scipt" (error message Microsoft 1719) "Windows installer service could not be addressed". I had downloaded a spyware program and backed up first, but cannot upload the back up due the problems. Any help would be greatly appreciated. I am on my desktop, so can receive email. Thank you,

Don Winn, Switzerland, FL
 

More replies
Answer Match 88.2%

I am getting this error message: "WindowsUpdate_8024400E" "WindowsUpdate_dt000" can any one help me with this? Thanks

A: "WindowsUpdate_8024400E" "WindowsUpdate_dt000" error message

twmom, Windows Update error 8024400E indicates that you're running into temporary connection errors in trying to check for updates. Please refer to this Microsoft KB article, which contains a lengthy list of troubleshooting steps.-Alex

3 more replies
Answer Match 88.2%

The day after my latest Win 7 Update, I suddenly started getting the error message:

MICROSOFT OFFICE OUTLOOK OFFLINE FOLDERS:
Your offline folder file cannot be configured.

c:\Users\Scott\AppData\Local\Microsoft\Outlook\outlook.ost

Besides this message, my emails struggle to open, I cannot attach files to outgoing emails, etc. I tried the Recovery function, to take my laptop to a date prior to the Windows Update I did on 5/21, but it couldn't execute for that date, or for prior dates (which may be another separate problem to deal with). I don't know what to do, other than possibly reinstall Office. Advice?
 

A:Outlook 2007 message: offline folder file cannot be configured

It sounds like something is wonky with your last update. See if you can uninstall it, reboot, and check your Outlook program. If it works properly, you might consider reinstalling the update...or not.
 

1 more replies
Answer Match 88.2%

"A problem caused [name of program] to stop working correctly. Windows will close the program and notify you if a solution is available." But no solution shows. I have been using the same HP Pavilion tx1000 for a year and a half with no software or compatibility issues. I run Vista Home Premium, Service Pack 1 - 32 bit. Slowly this message began to appear with every microsoft program I opened and then started to spread to non microsoft programs. I tried reinstalling the programs, doing a system restore to the oldest restore point I could, I also tried uninstalling any window updates that were installed right before my problems. I have read some strings that indicate it may be a compatibility issue between the service pack 1 and vista but the service pack came with the computer and it has been working fine until recently. I am at loss what to try next. Has anyone using Vista Home Home Premium experience anything like this!!!
 

A:Windows Error Message "{Name of Program} has stopped working" "A Problem caused ...

hi and welcome the first thing to do is run your anti virus and malware progs this will check for issues there and hopefully rule it out the next thing to try is sfc/scnw http://www.vistax64.com/tutorials/66978-system-files-sfc-command.html its a how to and also try this http://searchenterprisedesktop.techtarget.com/generic/0,295582,sid192_gci1276029,00.html this will check for other problems in both your files and your hard drive
 

1 more replies
Answer Match 87.36%

Get this every time I try to install it...whats going on here?

The only things I have which contain the word "QuickTime" are just some random audio codecs, a prefatch file in WINDOWS and a Photoshop file...

What could be causing this error? Registery issue? Argh, I need my iTunes back and to watch Apple Trailers! Grrr lol

Thanks in advance.

A:""QuickTime" is not a valid short file name" Error :S

I'd attempt a clean reinstall, again:

Go into Start/Run and type appwiz.cpl and hit enter.
Remove these applications:
1. Apple Software Update
2. Apple Mobile Device Support
3. iTunes
4. QuickTime

Restart the computer
Download & Install the Windows Installer Cleanup Utility:
http://support.microsoft.com/kb/290301/
Launch the Utility: Start > Programs > Windows Install Clean Up
Select any of the above mentioned applications, and click Remove

Restart the computer again
Download & install iTunes again from here: http://www.apple.com/itunes/download/

1 more replies
Answer Match 87.36%

Hi,

I have started getting this as an error message on opening Word 2007.

"Word could not create the work file. Check the temp environment variable."

Am not able to save any word document. Also, on trying to close Word I get this error message;

"Changes have been made that affect the global template, Normal.dot. Do you want to save those changes?"

Have checked my environment variables, User Variables are set to as under;

Variable - Value
Temp - C: Documents and Settings/ABC/Local Settings/Temp
TMP - C: Documents and Settings/ABC/Local Settings/Temp

Also, the Value in the registry HKEY_CURRENT_USER >Software >Microsoft >Windows >CurrentVersion >Explorer >User Shell Folders >Cache is as %USERPROFILE%\Local Settings\Temporary Internet Files.

Pls assist in resolving this issue.

A:Word 2007 Error Message: "Word could not create the work file."

There are 2 registry paths to change:
HKEY_CURRENT_USER >Software >Microsoft >Windows >CurrentVersion >Explorer >Shell Folders
HKEY_CURRENT_USER >Software >Microsoft >Windows >CurrentVersion >Explorer >User Shell Folders

Both have the "Cache" String which should be changed. And the correct Win7 Cache path in both entries is

%USERPROFILE%\AppData\Local\Microsoft\Windows\Termporary Internet Files

2 more replies
Answer Match 87.36%

Hi guys,

Hope you can help, this has been driving me nuts for some time now.

Not quite sure what triggered this issue but I have recently been unable to access (play media or music, delete, modify ) any files on my internal SATA slave drive ( B:\ ). Everything seems to work ok on the internal primary drive ( C:\ ). Recent files are held on C:\ , then transferred to B:\ for archiving, back-up or when C:\ is running low on space.

Sometimes when trying to access a file or directory on the B:\ drive I get an I/O error, but even when this error does not appear, I still cannot play or view the mp3, avi or jpeg.

I read somewhere that perhaps the permissions or User Controls have been messed up. I disabled User Account Control in Vista and tried to modify permissions, as they were not the same as the directories permissions on the C:\ drive. It worked for most files, but some are still inaccessible, I get the I/O error.

I tried to run a chkdsk on B:\ and get the error "Chkdsk is not available for RAW drives"

But the drives are both listed as NTFS in the Disk Management System.

Any thoughts on how to get the disk working again, or recover the existing data ? As it stands I cannot even copy files to C:\ to try and recover them.

Hope I have provided enough information.

Thanks
Chris
 

A:Getting "Chkdsk is not available for RAW drives" message on slave drive with Data ??

10 more replies
Answer Match 86.94%

While maintaining a closed network of entirely static IP address assigned hosts, one computer always reports "The static IP address that was just configured is already in use on the network. Please reconfigure a different IP address." no matter which IP address is assigned to the computer.

Assigning the same ip address that causes this error message to another computer in the network is successful.

System:
Microsoft Windows XP
Professional x64 Edition
Version 2003
Service Pack 2

ipconfig /all:
Windows IP Configuration
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection 3:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast Ethernet
NIC
Physical Address. . . . . . . . . : 00-E0-4D-84-76-87
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 0.0.0.0
Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . :

Executing "netsh int ip set address "Local Area Connection 3" static 172.10.10.1 255.255.0.0" reports "OK" but does nothing.

I was wondering what mechanism this OS uses to determine if the IP address is being used already or not.
 

A:Solved: Assigning any static IP address gives "IP address already configured" error m

7 more replies
Answer Match 86.94%

I have recently created an additional email address in Outlook 2010 and since then have been intermittently getting a pop-up window as soon as I start Outlook 2010 which prevents me doing anything and places a red X on the email icon in the bottom task bar.

The pop-up window says "Your IMAP server closed the connection" and gives me "OK" and "Details" tabs.

If I click OK it gives me the "No - you can't do that" tone. If I click Details I get;

Account: (email address)

Internal login failure. Refer to server log for more information.
Protocol: IMAP
Server: mail.aanet.com.au
Port: 143
Error Code: 0x800CCCDD

I then can't do anything to exit from the pop-up window or Outlook 2010 except to use Task Manager to stop OUTLOOK.EXE*32.

Any ideas on how I can prevent this from occurring?

I'm running Windows 7 64 bit and have only basic computer skills.
 

A:Solved: Outlook 2010 - "Your IMAP server closed the connection"

Update.

Turned out to be a network problem.

All fixed.
 

1 more replies
Answer Match 86.94%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E5400 @ 2.70GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4060 Mb
Graphics Card: Intel(R) G41 Express Chipset, 1806 Mb
Hard Drives: C: Total - 595439 MB, Free - 531563 MB; F: Total - 476268 MB, Free - 197506 MB;
Motherboard: Dell Inc., 0J190T
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled

I'm using Outlook 2010 for work emails. The program will run fine for an hour or so opening email attachments in a matter of a second or two, then all of a sudden it starts to take 15 to 20 seconds to open an "unread" attachment. An attachment that has already been opened will open quickly anytime.

I've tried disabling add ons. I've tried using CCCleaner to clean out the computer as well as it's registry scanner. I've tried deleting all of my other emails, saved, sent or deleted, so there are only a few in Outlook and nothing has helped. The only way that it will function properly again for a short period of time is if I shut down my computer completely and restart. Then, I'm in that same perpetual loop of working great for a little while, then it starts opening email attachments slow again.

Any ideas?
 

A:"Unread" email attachments open slow-Outlook 2010

I appreciate your response very much. I did try that and it didn't seem to help.

I'm going to throw a wrench in this and probably cause a lot more confusion, but I've recently found something that appears to have something to do with the problem. This computer is hardwired (ethernet) into a wireless router. About once or twice in a 10 hour period during the day, the router somehow disconnects the internet. I have to turn the router off for 15 seconds and it comes back up along with the internet everytime. For some reason, I've noticed that just before (and I'm talking 15 to 30 mins. before) the router disconnects the internet, the email attachments begin to open slow. As soon as I reset the router, the email attachments open normally.

Go figure? I honestly can't see how one has anything to do with the other, but I'm about 99 & 9/10's sure that the problem goes hand in hand with the router disconnecting. I've just recently (in the last few days) noticed this and have been monitoring and experimenting with it. So far, it happens everytime.
 

1 more replies
Answer Match 86.94%

Hello All - I ran into an issue where Outlook 2010 (Calendar) does not show certain options for a Calendar Event. Meeting that has been received and accepted, when opened does not have option of "Respond" and once that button is clicked drop down menu should display "Reply, Reply All... Reply with IM, etc."

Here is the screen-shot of it and how it is supposed to look like.. just not seeing it on my computer:
Note: I did notice when someone schedules an appointment in Calendar this option is not available; but other meeting invites co-worker of mine does have and I don't. Complete the same environment, same machines, same OS image (W7 64-bit Enterprise - company computers). Also, company IT is looking into this and so far they have not been able to find the culprit of this issue.

Thanks all!

A:MS Outlook 2010 / Calendar event missing "Respond" (Reply All, etc.)

Hi CarDusan,

Means you are missing the section (Change Response) through which a user can accept or decline events or Outlook appointments.

This issue arises when the following data file exists in the Windows Registry (with the values):

Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Options\Calendar

DWORD: DisableResponseButtons
Value: 1

Use the given "Fix it for me" solution provided by Microsoft.
Manager is unable to respond to a meeting invite

Thanks
Clark Kent

2 more replies
Answer Match 86.94%

Hello,

I accidentally drag-and-dropped an important folder from the Navigation Pane to the center section of Outlook where I was viewing the list of emails in my Inbox. It did not ask me if I wanted to delete the folder or give any errors - it was just gone when I released the mouse.

Any ideas on how to get the folder back would be very much appreciated.

Thanks
 

A:"Drag-and-Dropped" folder and now can't find - Outlook 2010

If a Windows search can't find it it has gone into Cyberspace I would think.
 

3 more replies
Answer Match 86.94%

When I flag an item (i.e. email) for follow-up, it shows up twice in my to do list. I've figured out that this is because I have two .pst files in Outlook (outlook.pst and archive.pst). When I remove the archive.pst from the profile, only one flagged item shows.

I suspect this is the result of an Outlook auto-archive setting, but I'm not sure. If anyone knows, I'd be interested to know how to avoid this going forward?

Also, is there any way I can keep archive.pst as part of my Outlook profile and not have duplicate flagged items show up in my to do list, or do I need at this point to just take it off the profile and open it when I need to look up old items?
 

More replies
Answer Match 86.94%

Hi Guys
Having installed an SSD and cloned Windows 7 + Apps to it, I've come up against a couple of problems using Outlook 2010 and I'd be grateful for any help please. The pst file is on another HDD that was not involved in the upgrade.

1) Search function no longer works. either says not found immediately or carries on searching for ever. Clue may be in Indexing? Click on Indexing Status and get "Outlook is currently indexing you items. 2129 items to index" Problem is, this number is increasing, not decreasing! Started around 1600. Should PC be left on and Outlook open, and just be patient, or is something awry?

2)Since SSD installed, all emails with images have lost them. Applies to ones I already have and new ones when opened first time. Red Cross and message in each image frame "Linked Image cannot be displayed. The file may have been moved, renamed or deleted. Verify that the link points to the correct file and location".

Firefox is browser.

If I forward an email that is not showing embedded pictures to another PC the images are present again.
Presumably the images are stored somewhere and the link has been broken by the upgrade?

I've tried a few things suggested on MS forums without luck. Settings in Outlook seem correct.

Thanks for any suggestions!

A:Linked images "lost" in Outlook 2010 after SSD installation

Further to above post, have also noticed that when doing a search Programmes and Files from Start button, the only items found are those within Windows, nothing from my data files which are on a separate RAID 1 pair of discs.

Now wondering whether to set old HDD (that still has Windows on it) back as boot drive, check that everything is as it should be booting from that drive, then wipe the SSD and clone again? I used Easius ToDo clone tool so will use another programme next time. Any suggestions on which to use?

Is this the best way forward?

Thanks for any comments.

9 more replies
Answer Match 86.52%

Hi

We are moving from Windows XP / Office 2003 to Windows 7 / Office 2010
Huge change and of course people try everything that is possible...and impossible, things that you wouldn't of think of doiing.

But yes it seem you can actualy take files, in that case PDF files on your desktop and drag and drop them into an Outlook folder directly.

It doesn't show as an MSG file, it realy show's itself in Outlook as a PDF and you can double click it to open it.

It probably has the same system as Windows Explorer does

We have Symantec Enterprise Vault to Archive emails witch will automaticly do so after a predetermined period of time
We can archive the PDF file and it will result by creating a blank email from yourself with a PDF attached to it

So it does seem to work, i don't see any bugs or error or problem soo far.
But that is "so far"
I can't find anywhere on the internet a post or something that tells you "yes you can do that with Outlook 2010"

Anyone has an opinion on that matter understanding that everyone has differents ways of working...

Thank you

A:Drag and Drop Files into Outlook 2010 "Mail and Post Items" Folder?

Got it

Storing files directly in Outlook folders | MSOutlook.info

1 more replies
Answer Match 86.52%

I am running Outlook 2010 32bit with Windows 7 Pro 64bit. After installing google outlook sync (and subsequently uninstalling) an annoying popup window continues to appear when I start outlook. It asks me to Choose Profile. I have only one profile named "outlook". When you click "options" you can check a box that says "check as default profile" This does not make the annoying popup go away. It still pops up the next time you start outlook. After searching the web for a fix I found one promising work around. Access control panel then select "mail" here you go in to outlook profiles and check make outlook the default profile. The problem is this doesn't work with Windows 7 64bit and Outlook 32bit. In the control panel "mail" is grayed out and when you click on it nothing happens. Does anyone know how you can access Outlook profiles with this set-up?
Thanks in advance.
Oh and there is a very long thread in Google forums with many fixes, all of which I have tried, none of which have worked. it is obviously a problem caused by google outlook sync but google has remained silent.
Share

A:Annoying "Choose Profile" in Outlook 2010

Have you tried to repair Office 2010?
Go to the Control Panel
Select Programs and Features.
Go down to Microsoft Office 2010
Select change from the menu bar.
Then select repair.

7 more replies
Answer Match 86.52%

I've just upgraded to Outlook 2010, and now I find that links in emails I send and receive are not "hot." I aways message in Plain Text format because much of my emailing is done on Plain-Text-only mailing lists. Switching to HTML format is not an option.

How can I get Outlook 2010 make hyperlinks in email messages "hot"?

Diana

Win7 Ultimate (64)
Office 2010 (32)
Browser: IE8

A:Outlook 2010 hyperlinks in email "cold"

This is how it works in Outlook 2007 - hope it is valid for Outlook 2010 also.
Click "New" to start a new email message
Click the Office Orb (top left)
Click on "Editor Options" (bottom right)
Click "Proofing"
Click "AutoCorrect Options..."
Under "Replace", ensure that "Internet and network paths with hyperlinks" is checked
When you type a link into your plain text email, make sure you hit Space or Enter after the link to force it to go hot
However, in my experience, links in plain text emails do have a habit of sometimes going cold again when the message is sent, and I haven't found a fix for that - I assume it is something to do with the recipient's setup.

Anyway, hope this helps

2 more replies
Answer Match 86.52%

Been running 2010 for about 11 months now on a hosted Exchange Server, no problems at all until this past Sunday.

Almost all of the roughly 125 emails in my inbox list the sender as me instead of the actual sender. When a new message comes in, the taskbar notification popup displays the correct sender's name but in the actual inbox my name is displayed under "From"

When I open any of the messages the correct sender's name and email address are displayed.

This is a head scratcher for sure and confusing when trying to scroll through looking for someone's message or reply. Anyone else run into this/know the solution?

Thanks.

P.S. Running a Dell Studio 15 less than a year old, fast processor, 8GB RAM, etc., etc. No other computer problems at all, just this quirky email problem.

A:Outlook 2010 "From" emails all list my name instead of senders

Hi,

If you enable the preview window/reading pane, and then click one of the emails in your InBox, is the name at the top of your email as seen in the (preview window/reading pane) from the person that it sent it to you, or your name?

Regards,
Golden

7 more replies
Answer Match 86.52%

hi !

some office 2010 problems: when i try to view "Outlook Today" i get an error message:
"cannot display the folder. out of memory or system resources".

right-clicking on outlook today → data-file properties → home page,
the problem seems to bee that it changes from the default outlook.htm to outlook3.ht

res://E:\Program Files\Microsoft Office\Office14\1033\OUTLWVW.DLL/outlook3.ht

clicking on "Restore defaults" fixes it.

but the next time i start Outlook, or sometimes even if i just take a look at some inbox-folders and then go back to outlook today,
then it?s the same problem all over again.

i have used 2010 for a while, and never seen those problems before,
it all started a few days ago after i changed some other settings, only problem is that i can?t remember exactly what i did.

one weird thing is that the problems only seems to be with my user-account, if i use my admin-account everything works ok.

i have uninstalled 2010, used ccleaner to fix the registry, manually removed all office-related files from the users-folders,
then reinstalled 2010.

the problems are still there.

any ideas ?

A:Office 2010, "Outlook Today"-problems ?

  
Quote: Originally Posted by hackerman1


hi !

some office 2010 problems: when i try to view &quot;Outlook Today&quot; i get an error message:
&quot;cannot display the folder. out of memory or system resources&quot;.

right-clicking on outlook today → data-file properties → home page,
the problem seems to bee that it changes from the default outlook.htm to outlook3.ht

res://E:\Program Files\Microsoft Office\Office14\1033\OUTLWVW.DLL/outlook3.ht

clicking on &quot;Restore defaults&quot; fixes it.

but the next time i start Outlook, or sometimes even if i just take a look at some inbox-folders and then go back to outlook today,
then it?s the same problem all over again.

i have used 2010 for a while, and never seen those problems before,
it all started a few days ago after i changed some other settings, only problem is that i can?t remember exactly what i did.

one weird thing is that the problems only seems to be with my user-account, if i use my admin-account everything works ok.

i have uninstalled 2010, used ccleaner to fix the registry, manually removed all office-related files from the users-folders,
then reinstalled 2010.

the problems are still there.

any ideas ?



Hello,

Try this command Start > Run > Outlook /resetnavpane see how it goes

Good Luck,
Captain

3 more replies
Answer Match 86.52%

Want to set some accounts to check for new mail every ten minutes, others every 30 minutes, others not at all (only manually). Can't see how to do this. Even TBird can do that. What am I missing?

A:How to set "check mail" times for Outlook 2010

It is quite easy, in fact. In Outlook you do this using so called Send / Receive Groups. A group can include just one or multiple mail accounts.

You can define Send / Receive Groups as you wish by following these simple steps:
On ribbon, select Send / Receive > Send / Receive Groups > Define Send / Receive Groups:
.

.
Click New to create a new Send / Receive Group:
.

.
Give the group a name, click OK:
.

.
Select account you want to include in this group on the left pane, select Include the selected account in this group. Do this for each account you want to add in this group, finish by clicking OK:
.

.
Set the online and offline send / receive values for each group:
.

.
Save settings by clicking Close button
That's it.

Notice that you can also send / receive each group manually:



Kari

3 more replies
Answer Match 86.52%

I accidentally touched something in my 2010 outlook inbox that changed the headers. The "Subject" header disappeared.
Can you please tell me how to change the Inbox headers to say: From, Subject, Received Date.

Right now, it just says From and Received.

Thank you!

I have Windows 7 and Microsoft Office 2010.
 

A:How to Add "Subject" Header to 2010 Outlook Inbox

Hi welcome to the forum.
I would usually telle people to RTFM (look it up)
But OK, Right click on the header and choose "View settings" and the Columns.
You could also try usign the Help function.
Good luck
 

2 more replies
Answer Match 85.68%

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\i... Read more

More replies
Answer Match 85.68%

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\sy... Read more

A:"Your System Is Infected" Background + "Internet Security 2010" virus/malware problem

Hi and welcome to TSF.

I'm afraid HijackThis no longer provides the information we require.

We want all our members to perform the steps outlined in the link given below, as far as they possibly can, before posting for assistance.

http://www.techsupportforum.com/f50/...lp-305963.html

If you have problems with any of the steps, simply move on to the next one and make a note of the problem in your reply.

Please note that the Security Forum is always busy, so I would ask for your patience while waiting for a reply - it may take a few days.

This thread will now be closed.

1 more replies
Answer Match 85.68%

Hello!

We have shared folder on server that specific users can open it. In that folder there are bunch of excel files that they need to fill in. Problem starts when one user opens the document and starts filling the excel file, in that moment other user opens the same excel file but doesn't get the "file in use" notification. I have that problem for now only on one pc (win7, office 2010 standard + sp1). I tried to reinstall office 2010 and install all the updates but with no solution. Tried to delete all remaining Office folders but this also didn't solve the problem. Excel file on server is in 2003 format. On other pc with office 2010 standard upgraded from office 2003 professional i don't have that problem when opening the file, I receive "file in use" notification. Does anybody had similar problems and knows how to solve it? Thanks

A:Excel 2010 "File In Use" notification doesn't show

Problem solved. Permissions from the main folder didn't inherit on child folder thus user could open specific file in child folder but couldn't get "file in use" notification. After readding user as domain admin problem was solved.

2 more replies
Answer Match 85.68%

I installed my Dell photo AIO printer 942 in Windows 7 using the instructions on the web. The installation partially fails. The scanner function and copy functions work fine, but it won't print. It states that the printer is not communicating with the computer. When I go and try a page from Word 2010 the printer status states that it is printing to file, but on the Devices and Printers (Start menu) it states that the printer is ready, in Properties it says that the device is working properly and the location is "on USB printing port". Is this a driver problem? When I move the printer USB cable to another laptop, everuthing is working fine, so it is not a cabling or hardware problem.

A:Printer status on Word 2010 states "Where: File"

The 942 printer is the default printer as set up in the devices and printers tab

2 more replies