Tech Problem Aggregator

Windows Update IE10 Install messes up default browser configuration

Q: Windows Update IE10 Install messes up default browser configuration

So yesterday automatic Windows update installed IE10, today I noticed that links in certain applications open in IE10 instead of my configured default browser, which every link from this or any other application used to open in before that update and the reboot that followed the update.
I checked the Default Programs section in the system control panel, expecting maybe Microsoft wanted to get themselves in any more trouble with the EU and changing the default to IE. This was not the case however, all the associations were still pointing to the configured default browser, I noticed however I could not uncheck the defaults already set.
So despite the obvious configuration being correct, links would still open in IE10 even after yet another reboot.
I went ahead and checked the registry associations, and found that http(s) protocol as well as htm(l) filetypes were associated with Internet Explorer with various EditFlags set (presumably to prevent changing them through the user interface, or to ignore the user interface settings).

Seriously Microsoft? Don't you have enough trouble yet?

A: Windows Update IE10 Install messes up default browser configuration

I'd avoid IE10 and uninstall the update. It's riddled with bugs.

1 more replies
Answer Match 77.7%

I did a repair install of W7 Ult. x64 SP1. Applied all updates, but if fails to install IE10 update :

Attachment 286642

(as you see it is a dutch version).

If have run sure & sfc /scannow. Both report no problems.
CBS files are attached.
Please help ?

A:Windows update fails to install IE10 after repair install

Ok, it is working now. Steps I took :

1) Hide the update for IE10
2) Download and tried the installer for (my localized) IE10 : failed to install
3) Started windows update, suddenly there where 43 optional updates available including IE9
4) Installed all optional updates except IE9
5) Retried the installation of IE10 (not visible any more in updates) : succes

Hope someone else can bennefit,

Regards, Jan

1 more replies
Answer Match 77.28%

Hello there,

My computer was victim to some malware and that seems to be cleared up but I am now not able to install Internet Explorer 10 through windows update. I am receiving an error code of 9C59. Any help would be greatly appreciated. Attached is my CBS.zip

A:Cannot Install IE10 From Windows Update

I ran the Windows Troubleshooter and it fixed the problem for me, and then I was able to install IE10 without a problem, try running that

3 more replies
Answer Match 77.28%

I just installed Windows 7 Pro and it came with IE8. Windows Update has an "important" update for IE10 and a "optional" update for IE9. Can I safely skip the IE9 update and go straight to IE10?

A:Update to IE9 or IE10 after Windows 7 install

Yes - you can go directly to IE10 and you might want to read this:
Internet Explorer 10 - Enable 32-bit or 64-bit IE10 in Windows 7

1 more replies
Answer Match 76.44%

First of all, I'm new here, so try to be patient as I stumble through the rules.
Normally I'm pretty good at fixing software issues, but this one has me stumped.

I have a machine running Win7 h/p which seems to have installed any other updates fine, but always chokes on IE10, throwing "Code 9C59 Windows Update encountered and unknown error."
(As a side note, I've *never* seen it encounter a *known* error.)

What I have done with no success:
Renamed the SoftwareDistribution folder.
Turned off Norton's 360.
Uninstalled IE9 and reinstalled (it said I had a newer version of IE9 installed *after* I had removed it and rebooted!)
Tried downloading and running the redistributable installer for IE10.

All failed. I have since downloaded and run SURT, run an sfc scan, and checked the Windows error log while I waited. There are loads of instances of this in the event viewer:

"Installation Failure: Windows failed to install the following update with error 0x80070643: Internet Explorer 10 for Windows 7 for x64-based Systems."

I compressed a copy of the CBS folder and attached it.
Thanks in advance for any help.
Greg

A:*Only* IE10 install fails in Windows Update

The errors from the CheckSUR log are these....

Code:
Unavailable repair files:
servicing\packages\Package_1_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.mum
servicing\packages\Package_2_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.mum
servicing\packages\Package_for_KB2817183_RTM~31bf3856ad364e35~amd64~~9.4.1.0.mum
servicing\packages\Package_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.mum
servicing\packages\Package_1_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.cat
servicing\packages\Package_2_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.cat
servicing\packages\Package_for_KB2817183_RTM~31bf3856ad364e35~amd64~~9.4.1.0.cat
servicing\packages\Package_for_KB2817183~31bf3856ad364e35~amd64~~9.4.1.0.cat
The CBS.log appears to be incomplete - it ends a lot earlier than it should do - but still shows the following error....

Code:
2013-08-06 14:30:23, Info CSI 0000009d [SR] Beginning Verify and Repair transaction
2013-08-06 14:30:24, Info CSI 0000009e [SR] Cannot repair member file [l:20{10}]"csrsrv.dll" of Microsoft-Windows-Csrsrv, Version = 6.1.7601.18113, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
Please reboot and post the new CBS folder - meanwhile I'll try and produce a fix protocol for the CheckSUR errors.

9 more replies
Answer Match 75.6%

Hey,

I have been experiencing a 9C59 error when trying to update to IE10 on this PC. I have followed all of the troubleshooting advice available from Microsoft, ensuring all pre-requisites are installed etc.

I have attached three CBS.zip files here for evaluation (sorry had to split them to upload) and would greatly appreciate any help you can give on this issue.

Thanks!

A:Error 9C59 when using Windows Update to install IE10

The only significant error I can find in the CBS log is

Code:
2013-04-23 09:48:08, Info CBS Failed to find file: amd64_microsoft-windows-scripting-jscript_31bf3856ad364e35_8.0.7601.21969_none_fc18c9909e077b72\jscript.dll [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2013-04-23 09:48:08, Info CBS Failed to gather all required files. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2013-04-23 09:48:08, Info CBS Failed to gather all missing files for package: Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~10.2.9200.16521 [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2013-04-23 09:48:08, Info CSI [email protected]/4/23:08:48:08.190 CSI Transaction @0x12ab130 destroyed
2013-04-23 09:48:08, Error CBS Failed to pre- stage package: Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~10.2.9200.16521 [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2013-04-23 09:48:08, Info CBS Perf: Stage chain complete.
Please run the following command, and post the results.

DIR C:\Windows\jscript.dll /S

What Anti-Virus are you using?

4 more replies
Answer Match 75.6%

When I attempted to install IE10 from Windows Update, the update failed with Error 9C57.

There was also a prior failure (also this morning) to install an optional update, Platform Update for Windows 7 x64 edition (KB2670838).

Finally, while this may be entirely unrelated, I noticed earlier this week that the "Turn Window Features On and Off" function under Programs and Features of the Control Panel is missing quite a few items that I know used to be there. For example, there's no longer a Telnet or FTP option. The list is only about 6 or 7 items long. I mention this in case it's useful for troubleshooting.

I'm attaching CBS.zip, screen caps of the two failed Windows updates, and a screen cap of the Windows Feature showing the very few items in it.

Attachment 260711







Thanks so much in advance for your help!

Rgds,
Jeff

A:Cannot install IE10 from Windows Update, Error 9C57

There are some very rare errors present in both CheckSUR and CBS logs - they'll take some researching.

back later (if Tom doesn't get in first! )A

9 more replies
Answer Match 73.92%

I am having an issue that it looks like many other have run into trying to upgrade from IE8/9 to 10 or 11. Other Windows Updates go through fine but anytime I try to install IE 10 or 11 via Windows Update or from the offline installer it fails with the error 9C59.

A little backstory on this in case it helps.... We have a VDI environment so this is on our gold image. Months back we updated IE8 to IE9 but found that we were having compatibility issues with an internal web app and had to downgrade back to IE8 (via uninstalling the IE9 installed update). It appears that I can still re-install IE9 but anything beyond that fails with the info above.

I've tried many of the suggestions out there such as reinstalling the readiness tool, resetting windows update agent, etc but no luck so far. The interesting thing that I found is if i start fresh with this update again (so i start with IE8) , the "turn windows features on / off" shows IE 8 as an option to toggle on/off. However after I try the IE11 install and it fails, i still have IE 8 installed but the "windows features on/ off" window shows IE11...so its almost like it ALMOST gets there and fails.

Either way, if theres any help someone could have for this I'd greatly appreciate it! i'm happy to try and scans / logs that might help

thank you

andrew

A:Windows 7 32bit cannot install IE10 or IE11: Windows Update error 9C59

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

9 more replies
Answer Match 71.82%

Does anyone here know of a fix to this?

Since I updated Internet Explorer to ver 10, Now links someone sends in Google Talk open in IE 10 not my default Firefox !!

A:Google Talk Opens Links In IE After Update IE10, Not Frirefox Default

Hello voiceartistusa and welcome to the forums

Can you open your Start Menu, click on Control Panel > Programs > Default Programs > Associate a file type or protocol with a program. This should bring up a list of your filetype associations.

Under the Extensions header, can you tell me what is listed in the Current Default column for the following names,

.htm
.html
And for these Protocols (at the bottom)
http
https
Tom

2 more replies
Answer Match 68.46%

I have tried numerous times to install IE10. I have researched this issue thoroughly & have found no answer, All other updates will install - no problem. All my drivers are up-to-date. I even resorted to the MS "Fixit" to no avail.

The event viewer reads:
Log Name: System
Source: Microsoft-Windows-WindowsUpdateClient
Date: 3/15/2013 12:57:29 PM
Event ID: 20
Task Category: Windows Update Agent
Level: Error
Keywords: Failure,Installation
User: SYSTEM
Computer: QX9650
Description:
Installation Failure: Windows failed to install the following update with error 0x80070643: Internet Explorer 10 for Windows 7 for x64-based Systems.
Event Xml:
< Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WindowsUpdateClient" Guid="{945A8954-C147-4ACD-923F-40C45405A658}" />
<EventID>20</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>1</Task>
<Opcode>13</Opcode>
<Keywords>0x8000000000000028</Keywords>
<TimeCreated SystemTime="2013-03-15T16:57:29.682012200Z" />
<EventRecordID>499277</EventRecordID>
<Correlation />
<Execution ProcessID="1576" ThreadID="5236" />
<Channel>System</Channel>
<Computer>QX9650</Computer... Read more

A:Cannot install IE10 Update!

Hello TBoyd,

Help us to help you

Windows Update Posting Instructions

Without the information, your guess is as good as mine!

Tom

9 more replies
Answer Match 67.62%

Good Morning...one day someone told me to change my system configuration then i picked selective start up...then i unchecked a few boxes then it said...RESTART so i did...after that my sound was gone and my windows was using the old layout(all gray and not blue...)
so i switched back to normal after that it still wouldnt come back...
i have tried to use system restore but i dint make a restore point before i messed it up...

Please note that i am not good at computers please try to simplify things..xD

Thank you.

A:Help...i kinds messes up at system configuration...

Welcome to TSF!

It sounds like someone told you to go into the msconfig and change some of the settings. Does that sound familiar to you? If it does sound familiar to you then to get back to it you would go to run > type "msconfig". That will open a box that will ask you what you want to have star up when you start your computer.

As for why your sound is gone, I am not sure about that one. You might want to check your device manager and see if there are any yellow "?" next to anything. To get to the device manager you click on the control panel, then system, then it is one of the tabs in there, I forget which one at the moment. But anyway, see if there are any ? next to anything and then post that back up here.

Cheers!

14 more replies
Answer Match 67.2%

It has come to my Attention that windows 8.1 is a fish. A rotted , disgusting fish that messes things up. First it managed to crash my Laptop when i tried to revert.Now , I didn't update to windows 8.1 and now its sending my Laptop into what i call Operating System Limbo. What it's doing.

- Failing my Hardrives

Thats about it so far.. not too much ... yet . But i think it'll be progressively worse.My keyboard driver is
messed up.My keys go in and out all the time.There's just no winning here.

A:Windows 8.1 Update Messes with the screen?Why?

go to your mfg's website and download the win 8.1 drivers - not all 8 drivers work with 8.1, you will also to continue to get the 8.1 update nag screen until you update

or your hard drive is actually failing.. And needs to be replaced..

2 more replies
Answer Match 67.2%

Hi, I have windows XP. Windows told me I have an update .
It installs okay, but when I reboot my PC, it gets as far as the scrolling graph and stays there. I then Have to do system restore from safe mode.
This makes my Pc work, but then there is no update installed. Is there any way to install this without it messing up my computer?
chuck.
 

A:Solved: Windows update messes up PC.

7 more replies
Answer Match 66.78%

Hello,

I've installed Windows 7 64 bit home premium new on my laptop after it had a virus.
All updates worked fine except IE 10.

Here are the log file. Can you help me please?
I've installed Windows6.1-KB947821-v28-x64 already two times.
I've tried already to install the IE 10 like 5 times.

I'm getting always the error 9C59.

Error Code from the eventmanager: 0x80070643

Do you need more informations?
I don't wanna start again.

Thanks Akkalla

A:Cannot install IE10 Update - Error 9C59

There are a number of errors in the CBS log, although both SFC and CheckSUR are clear...

Code:
2013-09-12 00:49:57, Info CBS Read out cached package applicability for package: Package_for_KB2870699~31bf3856ad364e35~amd64~~9.4.1.0, ApplicableState: 112, CurrentState:112
2013-09-12 00:49:57, Info CBS Session: 30322497_1025413020 initialized by client WindowsUpdateAgent.
2013-09-12 00:49:57, Info CBS Failed to internally open package. [HRESULT = 0x800f0805 - CBS_E_INVALID_PACKAGE]
2013-09-12 00:49:57, Info CBS Read out cached package applicability for package: Package_for_KB2660075~31bf3856ad364e35~amd64~~6.1.1.0, ApplicableState: 112, CurrentState:112
2013-09-12 00:49:57, Info CBS Session: 30322497_1028533022 initialized by client WindowsUpdateAgent.
2013-09-12 00:49:57, Info CBS Failed to internally open package. [HRESULT = 0x800f0805 - CBS_E_INVALID_PACKAGE]
2013-09-12 00:49:58, Info CBS Read out cached package applicability for package: Package_for_KB2604115~31bf3856ad364e35~amd64~~6.1.1.3, ApplicableState: 112, CurrentState:112
2013-09-12 00:49:58, Info CBS Session: 30322497_1035709027 initialized by client WindowsUpdateAgent.
2013-09-12 00:49:58, Info CBS Failed to internally open package. [HRESULT = 0x800f0805 - CBS_E_INVALID_PACKAGE]
2013-09-12 00:50:00, Info CBS Read o... Read more

3 more replies
Answer Match 65.94%

Windows update KB2847077
causes Media Player 12.07601.17514 to lose track of all settings and libraries

Double clicking on a video media - opens a first time window that asks to use recommended or custom settings.

(this is catastrophic for me as I use Media Player's DLNA connectivity)

This has happened twice to me - first from a standard Windows Update (yesterday 12/11/2013) - I had to do a system restore to before the update, then figured out that it was KB2847077 - so updated everything else except for KB2847077 - my PC and media player were just fine after the restart.

Last night for some reason that update was installed again, from one of my vulnerability scans (despite me specifically hiding it in Windows Update) - so this morning my Media Player was messed up again - did another system restore before that module update, and everything is back to normal again.

--
Vincent

A:Windows update KB2847077 messes up Media Player

Did you do any of the recommended fixes from Microsoft?
From post #1
Windows update KB2847077

6 more replies
Answer Match 62.58%

Hi,

Everytime I try and change the default program for an extension to something else, its icon gets messed up.

For example,

I am using WinCDEmu ( WinCDEmu - A free CD/DVD emulator for Win32 and Win64 ), and want to mount an .mdf, but unfortunately, the .mdf has not been automatically associated, so I manually do it in Default Program. But when I am done, the icon for the file gets messed up and looks like this:



The icon, should look like this though:



What can I do to fix the icon issue?

Thanks,
Slasher

A:Changing default program for extension messes up the icon

It happens . The file will take load of the file icon of the default program associated . If you shift from WMP to VLC as your default music player, it will also happen .

There is no way to get back unless you get back to default default application .

Anyway, it's not an issue . It's natural .

9 more replies
Answer Match 62.16%

Another friend's computer (laptop).
I know that I can change the background via "Window Color", but when the color is white, why does the Seven Forums look like this?

I've reset IE10... any other suggestions that I can do via remote control?

A:IE10-32bit - browser and other windows backgrounds

  
Quote: Originally Posted by UsernameIssues


Another friend's computer (laptop).
Attachment 262131

I know that I can change the background via "Window Color", but when the color is white, why does the Seven Forums look like this?

Attachment 262129

Attachment 262130

I've reset IE10... any other suggestions that I can do via remote control?


OK, let's see.

Launch IE > Click the gear icon on the top right > Click "Internet Options"

Now click "Accessibility" under Appearance in the General tab.

Make sure everything is unchecked. Does that help?

9 more replies
Answer Match 60.9%

Could use some help on how to allow a user to set their default browser permanently even with IE11 being set via Group Policy as the usual default.

For logistical reasons, we are still on IE11 instead of using Edge for our default browser - mostly because our software hasn't been 100% tested with Edge and to avoid overall confusion in having made the jump as a company to Windows 10 recently.

I successfully created a default configuration associations .xml file and it is pushing IE11 as the default.

However, knowing we have some users who would like to use a browser other than IE11 and let it be their default, we're trying to accommodate them while still enforcing the policy in place. Additionally, we don't want to 100% dissuade users from
utilizing Edge, so we haven't tried removing it from public visibility within the OS.  The users in question are local admins on their machines and should, in theory, be allowed that capability.

Any suggestions?

More replies
Answer Match 60.48%

I opened up and saw the windows update options which included:
- Cumulative security update for IE9 kb2809289 (27Mb) (ticked by default)
- IE10 (69.1Mb) (unticked by default)

Would be ok to untick the ie9 update and tick the ie10 - which would mean that windows update will uninstall ie9 and install ie10?

A:Optional windows update IE10 and IE9

I found out why IE10 update option was unticked by default. It happens to need a platform update installed first which can cause problems. I'll let IE9 be for the meantime.

3 more replies
Answer Match 60.48%

Hi there,

I am having big trouble with IE10. The icon appears on my desktop but does not appear on programs and features as a result I cannot uninstall it. When I click on IE10 icone, the program appears for 1 seconde.

Having said that, Firefox and google are workking properly.

I tried to uninstall it, but so far I have been unsuccesfull. I tried to reinstall it as well but does not work.

Anyhelp would be very welcome.

Thank you,

Pascal
 

A:Solved: PB with Windows update and IE10

Go to Control Panel - Programs And Features - View Installed Updates - Microsoft Windows - Windows Internet Explorer 10, then right-click it and uninstall.

----------------------------------------------------------

ThinkPad R40, Window XP,Norton 2006,RAM 512, 1.5GhzClick to expand...

You need to update your computer specs.

----------------------------------------------------------
 

1 more replies
Answer Match 60.48%

ok, I believe this is due to some bad windows update, but there isn't a list that i can locate to uninstall.

I've already tried force uninstall all remnants,

using:
---
FORFILES /P %WINDIR%\servicing\Packages /M Microsoft-Windows-InternetExplorer-*11.*.mum /c "cmd /c echo Uninstalling package @fname && start /w pkgmgr /up:@fname /norestart"

FORFILES /P %WINDIR%\servicing\Packages /M Microsoft-Windows-InternetExplorer-*10.*.mum /c "cmd /c echo Uninstalling package @fname && start /w pkgmgr /up:@fname /norestart"
FORFILES /P %WINDIR%\servicing\Packages /M Microsoft-Windows-InternetExplorer-*9.*.mum /c "cmd /c echo Uninstalling package @fname && start /w pkgmgr /up:@fname /norestart"
---

after a reboot, I will get IE8., then I am able to only install ie10. (I've already tried installing ie9/ie11 with the antivirus uninstalled with no effect)

in the windows update screen.
ie11 fails with 9c59,
ie9 fails with 3715
---
When I run IE10, it will load up, for a while (white completely devoid of any text/icons/menu) then close with no error message (even in eventlog) , I've tried reset to default settings/restore advanced settings from control panel\internet options\advanced tab.

KB2846071 does not appear to be installed.

A:Cannot run ie10, cannot install ie9/11 (ie10 installed)

The CBS log shows this problem...

Code:
2014-06-26 23:34:44, Info CSI 0000033b Couldn't find the hash of component: Microsoft-Windows-IE-HTMLRenderingMedia, Version = 11.2.9600.16428, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the catalog [l:192{96}]"\SystemRoot\WinSxS\Catalogs\f967e3adade5a1edc1e6d622347f3de0c670e610d5a708a65aa0059ef98a0455.cat".
2014-06-26 23:34:44, Error CSI [email protected]/6/26:15:34:44.100 (F) d:\win7sp1_gdr\base\wcp\componentstore\csd_winners.cpp(1302): Error 80092004 [Warning,Facility=FACILITY_NTSSPI,Code=8196 (0x2004)] originated in function CCSDirectTransaction::AddImplicationsToCatalogsAndVerifyComponentHashes expression: (null)
[gle=0x80004005]
2014-06-26 23:34:44, Error CSI 0000033d (F) 80092004 [Warning,Facility=FACILITY_NTSSPI,Code=8196 (0x2004)] #6917973# from CCSDirectTransaction::PrepareForCommit(...)[gle=0x90092004]
2014-06-26 23:34:44, Error CSI 0000033e (F) 80092004 [Warning,Facility=FACILITY_NTSSPI,Code=8196 (0x2004)] #6917972# from CCSDirectTransaction::ExamineTransaction(...)[gle=0x90092004]
2014-06-26 23:34:44, Error CSI 0000033f (F) 80092004 [Warning,Facility=FACILITY_NTSSPI,Code=8196 (0x2004)] #6917971# from CCSDirectTransaction_IRtlTransaction::ExamineTransaction(...)[gle=0x90092004]
2... Read more

3 more replies
Answer Match 60.48%

Our users are currently running IE9 due to some things they need to access which have not been compatible with more up-to-date versions.  We are ready to upgrade to IE10, but I have been unable to find any downloads from Microsoft for that browser;
everything attempts to push toward IE11, which will not work for us.  Is a direct download available for IE10, or must we upgrade to IE11 and then downgrade in order to get the desired version?

More replies
Answer Match 60.06%

Hello all,
The problem I seem to be having has to do with Internet Explorer(specifically, "Internet Explorer 10 for Windows 7 for x64-based Systems") repetitively and "successfully" updating through Windows Update EVERY DAY. Each day when I start up my PC, Windows Update comes up notifying me that this same important update is ready to be downloaded and installed. I have done two different things: Downloaded and installed the update through Windows Update normally and also ignored it while regular use and allowed it to download and install prior to shutdown of the pc. However, for about 10 days straight now, whenever I start my pc back up, the SAME update comes up saying it needs to be installed.

Does anyone here have any clue as to what could be going on? If there is any additional information I could provide for one of you awesome men or women to help me out, I will do my best to comply.

Thanks in advance!
Tyler

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) II X4 955 Processor, AMD64 Family 16 Model 4 Stepping 3
Processor Count: 4
RAM: 8191 Mb
Graphics Card: NVIDIA GeForce GTS 250, 1024 Mb
Hard Drives: C: Total - 476837 MB, Free - 33430 MB; E: Total - 476929 MB, Free - 33211 MB;
Motherboard: MSI, NF750-G55 (MS-7578)
Antivirus: AVG Anti-Virus Free Edition 2012, Updated and Enabled
 

A:Solved: IE10 bugged in Windows Update

7 more replies
Answer Match 60.06%

I have, as far as I can tell, a perfectly running W7 installation with Firefox 4 as my browser. I don't want to install IE 10. Windows Update keeps reminding me that there is an important update ready. It is IE10. Is there any way I can keep Update from reminding me that I don't want to have this unimportant to me update?

Thank you.

A:Stop Windows Update from Reminding Me About IE10

Hi jsquareg

I presume you mean IE 9. If your truly adamant about not using it, you can hide the update in windows update and it wont bother you again.Just right click on the IE9 update and select hide.

This will help Windows Update - Hide or Restore Hidden Updates

Danny

9 more replies
Answer Match 59.64%

When i create a new firewall role (inbound or outbound) in the `Windows Firewall and Advanced Security` after refresh, it disappears! I have this problem recently and i don't know why? (I searched and there is no specific local group policy that may cause
that.)
My OS: Windows 8.1  


I reset firewall settings to default but it keeps resetting to it's default settings ... It's like the `Netsh advfirewall firewall reset` command is running always!!!

More replies
Answer Match 59.64%

I have posted this in several other forums and newsgroups during the past week. So far, no one had been able to solve it...

I removed "Spy Sheriff" from my AMD64 system. Everything worked after cleaning but XP SP2 was buggy. Internet Explorer also stopped asking to be the default browser (both Firefox 1.5.01 and IE6 were installed). I tried everything to remedy this but nothing worked.

A number of options also appear to be missing from my BIOS setup that used to be there, including the "Built-in Virus protection".

I reinstalled XP Home SP2 and both browsers but the problems described above remain. Could malware have damaged my BIOS? (my apologies if this is posted in the wrong section.)

A:Can't Set Ie6 As Default Browser Even After Clean Install

The problem probably resides in your registry, not your bios.

What steps have you taken to repair Internet Explorer?

Go to the control panel and click on "Internet Options",

Click the "programs" tab,

Check the box that says "Internet Explorer should check to see if it is the default browser".

Click "apply", click "OK".

What other problems are you experiencing?

7 more replies
Answer Match 59.22%

Have spent all afternoon trying to sort this and am close to giving up but thought I would post some logs in here in one last attempt. Have completed all important and optional Windows updates but the installation of IE10 fails everytime with error 9C59. Have tried manual download and same issues.
SFC scan has no issues.

CBS logs attached if anyone has any bright ideas. Please let me know if you require any more information.

A:Windows 7 HP x64 Update IE10 Error Code 9C59

There are no signs that you've run either SFC or CheckSUR....

Please follow the Windows Update Posting Instructions and post the requested data

6 more replies
Answer Match 59.22%

Windows Updates (you know, the one recommended to run Automatically) installed IE11 which brakes many websites, which created quite frustrating situation and highlights why Windows 8 is a complete failure, as is 8.1.
The only way that IE11 can be uninstalled is via the Turn Windows Feature On or Off, as it does not appear in the Uninstall Programs list. When I did that iexplore.exe got deleted, cannot find in any method suggested in the many online post about people having same issue trying to downgrade from IE10 to 9, so essentially I have no IE now. Thank God for Google Chrome! Trying to install IE10 manually gives a "IE10 is already installed message", but of course it can?t be launched without iexplore.exe, and the only option I?m left with is to turn IE11 back On. Nice huh? I have read that IE is now part of the Windows 8 OS so I'm SOL.
Thanks to Microsoft I now have a $700 paper weight as some sites I absolutely need (Bank, School, job WebMail which is Outlook and that doesn't even work anymore) that require IE do not work on IE11.
Of course according to Dell downgrading out of this IE8 frustration is out of the question, so I'm thinking of wiping it clean and installing a server OS and be done with it.
So oh great Microsoft Developers, can you help me find a way to make YOUR LAPTOP (obviously not mine) work for me. Please note that all the methods of searching for Explorer, Internet Eplorer, iexplore.exe, and so forth in order to PIN IT to my desktop have ... Read more

A:IE10 Disappears after Windows update to IE11 Turned OFF

Since it's an update try to remove it:
Remove an update

Weird, IE11 should make place for IE10 with the above procedure.

There is no way to use IE9 on Win8.

If nothing works and IE11 remains, try changing the developer tools (F12) browser mode (Alt-B) to 'emulate' an older browser if possible.
IE11 Compatibility Mode - Microsoft Community

3 more replies
Answer Match 59.22%

We recently updated two machines to the Anniversary Update (via the Media Creation Tool method).

Since the update, when you log in, the default browser is automatically opened at MSN.com. Neither browser has msn.com as their default page, and if you launch the browser from the menu / taskbar icon it opens in the correct default page. .

There is nothing in Task Manager >> Startup, or shell:startup, to trigger this browser opening. This behaviour was definitely introduced by the AU; and whilst it's only a minor irritation, it would be nice to make it stop, so any suggestions welcome.

Thanks

More replies
Answer Match 59.22%

We recently updated two machines to the Anniversary Update (via the Media Creation Tool method).

Since the update, when you log in, the default browser is automatically opened at MSN.com. Neither browser has msn.com as their default page, and if you launch the browser from the menu / taskbar icon it opens in the correct default page. .

There is nothing in Task Manager >> Startup, or shell:startup, to trigger this browser opening. This behaviour was definitely introduced by the AU; and whilst it's only a minor irritation, it would be nice to make it stop, so any suggestions welcome.

Thanks

A:Anniversary Update - default browser opens on login

Hi, not seen any other such report, so doubt it's an anniversary 'feature' if you see what I mean.

Suggest:
a. Try a clean boot and see if a browser is still launched
b. Get Autoruns (free) and inspect/search for start up entries. (Very comprehensive).
c. Create a new user for test purposes and see if the same thing happens (it probably won't).
d. Otherwise an outside possibility is somehow it's launched by an unexpected scheduled task triggered on logon.

more replies
Answer Match 59.22%

I have an HP P6530F desktop with Windows 7 Home Premium 64 bit SP1. The HP Support program that periodically scans my computer is offering an optional update for Intel RAID Driver and Configuration Software. I have attached a screenshot of the specifics.

My computer seems to be running fine. Is this update something I should bother with?

A:Intel RAID Driver and Configuration Software Update - Should I Install

If you're not running a RAID setup then no, leave it well alone.

1 more replies
Answer Match 59.22%

Hi,Please accept my apologies if this is not quite the category to post this problem...I am unable to install some Internet Security software or work with a number of web pages correctly as the Java is not working in Internet Explorer 10 on Windows 8 of our machine?Windows Updates are current, I have tweaked all sorts of ActiveX and Plug-In options on and off within "Internet Options" and the "Java Control Panel", and the "Verify Java Version" link ( http://www.java.com/en/download/installed.jsp ) works fine in displaying the installed JRE version within Firefox, and Opera etc.I have un-installed and re-installed Java, and have the latest version, even trying 64-bit and 32-bit versions of it both individually and concurrently, and am working in the Desktop and not Metro version of IE 10.I even reset IE, tried compatibility views, and disabled other Add-Ons etc., and have also tried to find a solution online where I notice several people have also had this issue, but am getting nowhere?Thus I am stumped and very very angry and frustrated?Any suggestions?

A:Java Install Not Working in IE10 on Windows 8

Hi

I don't understand what doesn't work? Is there some specific program or webpage that is having a problem? If so, what is it and what is the error message?

James

27 more replies
Answer Match 58.8%

Hi

After your great help with my last problem i'm back with another (the price of success!)

Windows 7 ultimate - some updates are installing OK, some are being repeated after a successful installation & the IE10 update repeatedly fails with error code 9C59.

I've tried MS Fixit. I've done a repair install of Win7 ultimate, which improved things a little (before that,updates KB2667402 & KB982018 would continually fail).

CBS.zip & windowsupdate.log are attached.

Here's some background which may be relevant:
I started with Win 7 pro, which turned out to be non-genuine (ebay!). Windows updates stopped working because it was non-genuine. Microsoft supplied a new copy of Win7 ultimate, which I installed via a custom installation. I didn't do a clean install because I used a 3rd party product call PCmover to include all applications & settings in the upgrade to Win7 ultimate. All has been OK with Win7 ultimate except the updates.

THanks

A:Windows updates repeating & IE10 update failing (9C59)

PS.
I don't know if this would help:
"How do I reset Windows Update components?"
How do I reset Windows Update components?

I was going to try that but thought I'd ask here first.... taa

8 more replies
Answer Match 58.8%

I have been trying to use windows update for ie10. I always get a Code 9c57 error. Now that ie11 is out, I have been trying that update with the same error. I have tried all the suggestions that I could find around the internet.

Hardware: Dell XPS M1330 laptop
OS: Windows 7 64bit

As per the suggestions for this thread, I have attached my CBS.zip file.

Any suggestion would be greatly appreciated.

A:windows update to ie10 and/or ie11 problems, error 9c57

Code:
Checking Package Manifests and Catalogs
(w) CBS Catalog Expired 0x800B0101 servicing\Packages\Package_11_for_KB2729094~31bf3856ad364e35~amd64~~6.1.1.0.cat
(w) CBS Catalog Expired 0x800B0101 servicing\Packages\Package_5_for_KB2647753~31bf3856ad364e35~amd64~~6.1.3.1.cat
(w) CBS Catalog Expired 0x800B0101 servicing\Packages\Package_for_KB2732500_SP1~31bf3856ad364e35~amd64~~6.1.1.0.cat
I don't recall ever seeing this error before.

I'll have to research it.

back tomorrow - hopefully!

9 more replies
Answer Match 58.38%

Hey guys, I'm having an issue in my week old installation of Win7 x64 Home Premium. Things seem to run OK in general, and most Windows Updates install just fine, but there are 2 updates which I have so far been unable to install. There's an Important update listed to install IE10, and an optional one listed for IE11. The odd thing is, I have IE10 already installed. The error code I get when trying to install these updates (or even just the IE10 one as in the image below) is 9C48:

Attachment 311906

I ran the SURT tool and the SFC scan (no errors found as far as I can tell), then created CBS.zip, but it was too large (20 MB) for attaching here, so I uploaded to my Dropbox account here: https://www.dropbox.com/s/1wd49llupy2odyb/CBS.zip

Any ideas on where to go from here? Should I just hide the IE10 update in Windows Update even though it's important? Thanks for any help you can offer!

-Eli

A:Error 9C48 when trying to install IE10 item Windows 7 x64

Thanks for taking the initiative and uploading the full archive!
The 9C48 error is relatively rare - hopefully it means that it will be easy to fix

Here's the error from the CheckSUR report...

Code:
(w) Unable to get system disk properties 0x0000045D IOCTL_STORAGE_QUERY_PROPERTY Disk Cache
...and here's what may be a clue in the background CBS data (the SFC scan was clear)

Code:
2014-03-27 10:27:10, Info CBS Perf: Stage chain started.
2014-03-27 10:27:10, Info CSI [email protected]/3/27:14:27:10.176 CSI Transaction @0x23fcca0 initialized for deployment engine {d16d444c-56d8-11d5-882d-0080c847b195} with flags 00000002 and client id [65]"TI2.0_0:0/Package_1_for_KB2834140~31bf3856ad364e35~amd64~~6.1.2.0"
2014-03-27 10:27:10, Info CBS Exec: Staging Package: Package_1_for_KB2834140~31bf3856ad364e35~amd64~~6.1.2.0, Update: 2834140-1_neutral_LDR
2014-03-27 10:27:10, Info CBS Exec: Staging Package: Package_1_for_KB2834140~31bf3856ad364e35~amd64~~6.1.2.0, Update: 2834140-1_neutral_LDR, PinDeployment: amd64_625642d59cbd9b78ffba236f626be496_31bf3856ad364e35_7.1.7601.22313_none_43c43e854bf640c0
2014-03-27 10:27:10, Info CBS Exec: Staging Package: Package_1_for_KB2834140~31bf3856ad364e35~amd64~~6.1.2.0, Update: 2834140-2_neutral_GDR
2014-03-27 10:27:10, Info CBS Exec: Staging Package: Package_1_for_KB2834140~31bf3856ad364e35~amd64~~6.1.2.0, Update: 2... Read more

5 more replies
Answer Match 58.38%

Hello, I have tried unsuccessfully to install IE10 on my Windows 7 64 bit system.

First, I wanted to say that yes, I am planning on following the posting instructions (system update readiness tool, and SFC scan posts), but first, I wanted to introduce the problem that I am having.

I was directed here after a search by this post: IE10 Installation Fails - Win 7 Pro 64-bit SP1 - Microsoft Community

I have submitted my own question to Answers.microsoft.com and simply linking that will show you what I have already done rather than typing it all out. Here it is: IE 10 will not install on Windows 7 64 bit Professional with SP1 - Microsoft Community

In this link you can see my error codes and whatnot. If you want me to post it all here, let me know.

So, here I am. I will run the System Update readiness tool tonight when I leave (I am at work). But in the meantime, if there is anything else you want from me, please let me know.

Thank you,
Dan

A:Cannot install IE10 on Windows 7 64 bit. Error Code 0x80070643

Please follow the Windows Update Posting Instructions and post the requested data

9 more replies
Answer Match 58.38%

I have a machine that refuses to update to Internet Explorer 10. It appears others have had the same error code which was caused by file corruption on the drive.

When trying through WU i receive the 9C59 error.

Trying the standalone .exe from microsoft doesn't install either.

I've ran SURT to no avail.

Any help is appreciated.

A:Windows Update - IE10 - Windows 7 Pro SP1 x64 - 9C59 error

CheckSUR actually managed to find and fix one problem...

Code:
Checking Package Manifests and Catalogs
(f) CBS Catalog Missing 0x00000002 servicing\Packages\Package_for_KB2804579~31bf3856ad364e35~amd64~~6.1.1.0.cat
(fix) CBS Catalog Missing CBS File Replaced Package_for_KB2804579~31bf3856ad364e35~amd64~~6.1.1.0.mum from Cabinet: C:\windows\CheckSur\v1.0\windows6.1-servicing-x64-7jul-13.cab.
(fix) CBS Paired File CBS File also Replaced Package_for_KB2804579~31bf3856ad364e35~amd64~~6.1.1.0.cat from Cabinet: C:\windows\CheckSur\v1.0\windows6.1-servicing-x64-7jul-13.cab.
The SFC scan found one rather important error...

Code:
Line 40253: 2014-01-14 15:00:12, Info CSI 000006aa [SR] Repairing 1 components
Line 40254: 2014-01-14 15:00:12, Info CSI 000006ab [SR] Beginning Verify and Repair transaction
Line 40257: 2014-01-14 15:00:12, Info CSI 000006ad [SR] Cannot repair member file [l:22{11}]"autochk.exe" of Microsoft-Windows-Autochk, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 40260: 2014-01-14 15:00:12, Info CSI 000006af [SR] Cannot repair member file [l:22{11}]"autochk.exe" of Microsoft-Windows-Autochk, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutra... Read more

8 more replies
Answer Match 58.38%

Anybody try IE10 for windows 7-any good-it is on windows update site. Is it worth upgrading to from IE9 and does windows update install both the 32 and 64 bit. versions. My operating is 64 bit.

A:anybody try IE10 for windows 7-any good-it is on windows update site

Hello CaptNemo,

I like IE10. In IE10 32-bit and 64-bit is merged together now in a 64-bit Windows 7.

Internet Explorer 10 - Enable 32-bit or 64-bit IE10 in Windows 7

7 more replies
Answer Match 57.96%

If you want the IE tile in Start to always open the desktop version of IE 10, then you have to make the 2 settings shown in the picture. You get there from Internet Options > Programs tab. Then do not forget 'Apply'.

More replies
Answer Match 57.96%

Hi folks

I found my way here after being unable to update to IE10 on Windows 7 (32)

the windows update error is:

"Internet Explorer 10 for Windows 7
Installation date: ‎09/‎05/‎2013 10:22 AM
Installation status: Failed
Error details: Code 9C59
Update type: Optional"

I have attached the CBS.zip file. (NB: when I pasted the copy of CBS folder to my desktop I got an error message that access to CBS.log was denied. Maybe this is normal?)

I'd be most grateful for any help you can give.



Regards

Chris

A:Windows update fails for IE10 on Win7 error code 9C59

the copy/paste problem is common - which is one reason why I tend to prefer just collecting the CBS.log file on its own.
Copy the C:\Windows\logs\CBS\CBS.log file to your desktop, and compress it, then upload that.

9 more replies
Answer Match 57.96%

Afternoon all,


I am having some issues with Windows Update in relation to the IE10 & IE11 updates. I have just installed a new SSD and a fresh copy of Windows 7 Home Premium 64-bit. All other updates have come through successfully except for these 2.


I have looked through some of the MS pages to determine the problem but i am still at a loss. I have followed the Windows Update Posting Instructions and attached the results below.


I am new to this so please be gentle ...


Thanks in advance for any assistance you can render.


Graham

A:IE10 & IE11 - Windows Update Issues - Code 9C57 & 9C47

Quick Update,

As it was a clean install of Windows I decided to format and have another go. This time everything worked fine with no failed updates.

The only thing I did differently was that I removed 3x2gb of ram that I recently installed. I had 6x2gb the first time round.

Don't know if this has anything to do with the errors I got but thought I would throw it out there anyways.

Thanks

Graham

2 more replies
Answer Match 57.96%

Hi,

Windows update for IE10 on win7 64 fails continuously with errore code 9c59. Manual install resulted the same.
I run sfc /scannow which didn't find any problem.

I am attaching my CBS log.

Can anyone help?

Thanks,

Beez

A:Windows update for IE10 on win7 64 fails with error code 9c59

Please follow the Windows Update Posting Instructions and post the requested data

9 more replies
Answer Match 57.96%

Yesterday's Firefox Update has changed my ability to drag intact one of my 275 SF links from Bookmark's tab into a post here.

Before I could drag the Bookmark title and edit it just like the other text, only it was in blue. Now it immediately converts it to the URL so that I can't edit the link title until it is posted. And the link title is no longer my custom title but the one originally given the webpage.

Is it possible to roll back this update and skip it altogether?

A:Firefox update messes up my SF links

Roll it back as in uninstall FF13 and go back to 12? I don't see why not, unless I'm missing something here.

https://ftp.mozilla.org/pub/mozilla....efox/releases/

8 more replies
Answer Match 57.96%

Since the last update came down, my browser jumps whenever I touch the mouse. I'll go to click on a link and the wrong url comes up because the browser, or mouse, jumped. This will also happen when I just touch the mouse. It mostly happens opening a new page. After 2 jumps, it settles down.

Is there a cure for this? Not a show stopper but very annoying.

Thanks,
Burt

A:Latest Update messes up Firefox

Maybe just coincidence, but the same thing happened to me; except it didn't end with Firefox.
My mouse was double-clicking all over the place! "Annoying" wasn't a strong enough word.

I tried a different mouse and the problem went away.
It's weird that my mouse should give up the ghost at the same time I install the SP1 update, but that seems to be what happened.

I upgraded Firefox to their latest version 4 beta 12; it now seems to handle most of my add-ons.
Probably didn't have to do that, but since the mouse wasn't that old it didn't occur to me to check it right off.

Don't know if this any help to you, but you might try it?

2 more replies
Answer Match 57.96%

HP Support Assistant had an update on 11/30/2015, random keys were affected by this. (w,a,s,d,r,Tab,etc.)

My keys won't work properly, I could press and hold w and it won't come active but when pressing it again a second later, it'll work.

my keys would also become active just by pressing it but not holding it as in, it would just spam a later after pressing it once, this applies to all of the keys i mentioned.

I can't determine whether its an update, process, services or anything.

Iv'e tried two system restores, even before 11/30 and I still have this problem.

I'll provide images of the updates and services:


These are the updates I removed +more added






here's all of the running services.

More replies
Answer Match 57.54%

I have seen numerous search results from Google, but none of them work

I just sent my computer in to be worked on a month ago. I had this working before then

It was factory reset so this is a computer/browser issue, nothing with the restore

I had Yahoo Email set as default. For each of my previous computers, I did too.

Even when I got this in March

I cannot find the link telling me how to do it: I remember seeing it could be done with a particular version of Yahoo toolbar And I saw one that would install the mail plugin with Yahoo Messenger

Neither has been there when I installed several vesions

Any help would be most appreciated

Eric

A:Default Yahoo Email Win 8 IE10

Hi Eric,

Can you tell us a bit more about how you'd like to use Yahoo?
Do you use it via web mail (in your web browser)?
Or do you want to use the built-in Mail app that appears on the Windows 8 Start Screen?
Or do you have other email software that you want to use?

2 more replies
Answer Match 57.54%

hello everyone. recently i installed xp on an old computer, and it was working fine for about a week with normal usage. it was a modded version called xp essential 2, with themes and programs pre installed. currently, this same xp is installed on 5 other old computers working without a hitch.

here are the computer specs:
processor: pentium III-S tualatin 1400MHz
ram: 512MB
mobo: qdi advance 10t
graphics: nvidia riva tnt2 model 64

now, here is the problem: after about a week, when you restart the computer, upon logon an error message pops up saying something about a missing shared dll file. click ok, it logs on fine. in the start menu, under "all programs" there is another folder called "programs", which is empty. before the problem occurred, you could mouse over this folder with no problem. after the error message, however, when you mouse over it, after the delay of them popping up, when the sub menu should show up, the computer just immediately shuts off with no warning, almost as if i unplugged it. i turned it back on, got the same error message, clicked ok, ran ccleaner registry scan and when it scanned activex and class issues, the computer would switch off, like before. i have reinstalled twice, but after the exact same amount of time, i get the same problem.

this problem turned up after i got a new processor for the computer. it originally had a celeron 1ghz (slow as hell), so it needed an upgrade. after i installed the n... Read more

A:XP install messes up after a week

We can't help you with illegal copies of XP. Please read our forum rules at the top of every page.

This post is closed.

BG

1 more replies
Answer Match 57.54%

I purchased, downloaded,burned to DVD. I put the dvd in my drive then when i booted to the installation screen. My screen messed up and when i moved my mouse it was like making a trail of pink,blue,green little error lines. I will update this thread when i take the picture of the installation screen later , i am not sure if i should post here but i really need help

A:Screen messes up when about to install on DVD

Try redownloading the setup D/L from the email link & remake are disc.







Originally Posted by Your Windows Store email


If you need to download Windows, write down your new product key and enter it here.



How to redownload your Windows 8 Upgrade setup D/L.

3 more replies
Answer Match 57.54%

Windows update for IE10 on Windows 7 64bit fails continuously with error code 9c59. I tried the stand alone updater with the same results. All other windows updates complete successfully, it's just IE10 that continually fails.

Don't know if this is related but I do have problems with IE8 (current browser). After a while, an open IE window will become non responsive and can't be closed out. I have to use task manager to close it down. I have sent off the reports to MS, but no solution has appeared.

I've attached the cbs file. Let me know what else I can do. Thanks.

A:Windows update for IE10 on win7 64bit fails with error code 9c59

There are no significant file errors in either SFC or CheckSUR logs.

In these cases, it has sometimes been a solution to uninstall IE9, reboot a couple of times, and then reinstall IE9 again, before installing IE10 successfully.
It's worth a try

5 more replies
Answer Match 57.12%

I need help on figuring out how to undo an update from HP Support Assistant.

This update screws with just about all of my keys.

Either of the keys will stop working as if I can't move in-game, my character would also move by itself without me holding anything. I could press tab to open up the scoreboard but doesn't come up the first time I press tab.

Iv'e tried two system restores and tried unistalling updates. I can't figure out if its an update or a process in the task manager

This update came up around 11:00 PM - 12:30 AM 11/30/2015, around midnight.

More replies
Answer Match 56.7%

The problem: IE10 seems to now default all web sites to "Internet Explorer 10 Compatibility View" browser mode.  

This will in turn change the Documents mode to something other than "Standards" unless each web page has explicitly defined : <meta http-equiv="X-UA-Compatible">, and often screw up how things are rendered.  The user is able to
change it manually via the f12 menu, but it reverts back the next time IE is opened.

Also: the broken paper icon in the address bar is no longer displayed for any page, and "tools > compatibility view" is greyed out.

It's this same way for any PC at my business, and regardless of what's in the compatibility view list.  And yes "display all websites in compatibility view" is not checked.

Up until some point in the last year, it didn't work this way.  Before: it would default to "Internet Explorer" unless the web site was explicitly included in the compatibility view list.

Can anyone still on IE10 recreate this?  Was there a windows update at some point in the recent past that has affected this behavior?  Or does this have to be something in my environment?


Thanks,
Jaime

More replies
Answer Match 56.7%

Hello all,

I installed the Creative X-Fi Audio Processor update (10/22/2009), and it completely messed up my computer (Windows 7 x64).

I accidentally installed this update while checking if I had new updates to install. Little did I know that it would cause me much grief. I rebooted the system so that the updates could finish, and when I saw my login screen things went bad. The screen resolution was all out of whack (800x600, while my regular resolution is 1920x1080). To make matters worse, the mouse won't move. When I logged in, I discovered the internet wouldn't work either. Soon, a popup window popped up, saying that "No ATI graphics driver is installed, or the ATI driver is not functioning properly. Please install the ATI driver appropriate for your ATI hardware." I went to the display settings (using only the keyboard) and discovered that my default resolution was no longer on the list. Dejected, I went on my other PC and downloaded the ATI driver pack for my video card on the crippled computer. I transfered it via flash drive to the crippled computer and installed it - rebooted, my resolution was back to normal, but the mouse and internet were still not working. I then transfered a Creative driver pack I got from the official site and put it on the flash drive and transferred it - no changes. I then used Guru3d's Driver Sweeper to get rid of the dregs of the Creative drivers, rebooted, nothing, and now my audio's dead too.

What's most depressing i... Read more

A:Creative Driver Update Messes Up Mouse and Internet

Hopefully, this may work

Repair Install[2]=General Tips

You should try to remove the update, also.

9 more replies
Answer Match 56.28%

Hi,
 
I have an old laptop.
 
HP Compaq 6820s
Processor: Intel Pentium Dual CPU T2390 1.86GHz
Memory: 2047MB(667)
Video Adapter: ATI Mobility Radeon X1350
 
I use Windows 7 Professional Service Pack 1 + last updates.
Browser: Google Chrome
 
95% of the time I use this laptop to watch videos here: http://www.dr.dk/tv/find-program/
 
The Windows has just been installed on the fresh formatted partition. But even in this situation when I only watch the videos from the above link, they still work interrupted sometimes, and Google Chrome loads a lot the task manager.
 
Considering the above please answer to the next questions:
 
1. Which are the best optimizations for Windows 7 to help me to see those videos smoother?
2. Do you consider is there any other browser which is more dedicated and lighter for watching videos online? If no, tell me please with are the best optimizations for Google Chrome to improve it for my demand.
 
Thank you very much ! 

A:Best configuration for Windows 7 and browser for my demand

Hi xspeed, I dont think your issue will be with the browser, there are other factors when streaming. 
 
Laptops network card
Is it a N or G network card?
Are you wireless or hardline?
 
Your network 
Who is your isp (most packet manage)
What router are you using?
Are you using a proxy?
What firewall are you using
The streaming server itself
How many people are hitting it at once
whats there down speed

6 more replies
Answer Match 56.28%

Hi,

I have an old laptop.

HP Compaq 6820s
Processor: Intel Pentium Dual CPU T2390 1.86GHz
Memory: 2047MB(667)
Video Adapter: ATI Mobility Radeon X1350

I use Windows 7 Professional Service Pack 1 + last updates.
Browser: Google Chrome

95% of the time I use this laptop to watch videos here: Seneste vist p? tv | Find TV Program | DR

The Windows has just been installed on the fresh formatted partition. But even in this situation when I only watch the videos from the above link, they still work interrupted sometimes, and Google Chrome loads a lot the task manager.

Considering the above please answer to the next questions:

1. Which are the best optimizations for Windows 7 to help me to see those videos smoother?
2. Do you consider is there any other browser which is more dedicated and lighter for watching videos online? If no, tell me please with are the best optimizations for Google Chrome to improve it for my demand.

Thank you very much !

A:Best configuration for Windows 7 and browser for my demand

I happen to know the Danish PBS service DR's website as I follow TV from all Scandinavian countries, simply switching to a proxy in respective country and logging in to DR (Denmark), NRK (Norway) or SVT (Sweden). For my native Finland I have other IPTV based services available.

There's a point in me telling the above: I really know the website you are using, and know that there's really not much you can do to make your watching experience smoother using your current laptop. Here's first a screenshot, watching a documentary on DR about Henry VIII of England:
Look how little resources my PC is using for this video stream, only 0.2% of CPU and under 27 MB of RAM, plus additional 3% of CPU and 190 MB RAM for browser in general.

This means the specs of a PC to watch DR stream don't have to be anything special to watch a smooth DR video stream, except for one thing: the GPU, the video adapter. As changing GPU in a laptop is really difficult, you have to cope with what you have.

Here are my tips to you:1. Run MSConfig.exe, edit Startup by disabling autostart of any unnecessary programs:

2. Edit Services by disabling all but Microsoft services:

- Select Hide all Microsoft services
- Click Disable all
3. Use smaller resolution in order to use less resources; your laptop's native max resolution is 1440 * 900 but changing that to for instance 1280 * 768 uses much less resources but the video quality remains almost the same
4. If your broadband speed is less than 3 Mbps, talk w... Read more

1 more replies
Answer Match 55.86%

Hi,

I was troubleshooting the problem of removing qv06 from homepage from last 3 days.
Since I tried all the options, I even took a lot of help from forum but to no avail.

Accidently I deleted all the internet explorer 10 registry entries through regedit.

Kindly provide me with default registry entries,

Awaiting ur response, I remain

Thanx in Advance

More replies
Answer Match 55.02%

Hello,

I am running on a machine running Windows 7 Home Premium x64. Other Windows Updates are working fine, but for some reason, the Windows Update for IE9 keeps appearing (and failing) even though IE9 is already installed. The update for IE10 (as well as the manual installer) also fail.

The "Windows Internet Explorer 9 for Windows 7 for x64-based systems" fails with error code 9C48.
The "Internet Explorer 10 for Windows 7 for x64-based systems" fails with error code 9C59.

I've attached the CBS folder with the CBS and CheckSUR files (I had to remove some of the older "persist" files to fit it under the attachment limit).

Appreciate any help!

Thanks,
Joe

A:IE9 Update Won't Disappear Though Already Installed, IE10 Update Fails

The operative errors are in the CheckSUR results...

Code:
Unavailable repair files:
servicing\packages\Package_for_KB2809289_RTM~31bf3856ad364e35~amd64~~9.4.1.0.mum
servicing\packages\Package_for_KB2809289_RTM~31bf3856ad364e35~amd64~~9.4.1.0.cat

I've uploaded afile - j99aa.zip - to my SkyDrive at Noel's SkyDrive

Please downloadand save it.

Right-click onthe downloaded file, and select Extract all…

Extract to thedefault location - which will create a new folder j99aain the same place.

Open this folder- there should be one folder inside it (Packages)

Copy the content of the Packages folder to thefolder

C:\Windows\Temp\CheckSur\Servicing\Packages
Nowrun the CheckSUR tool again (it may take a while)

Postthe new CheckSUR.log file, and the CheckSUR.persist.log file.

Then run another SFC/SCANNOW, and post the new CBS.log file

Then do a manual Check for Updates - what happens/shows now?

5 more replies
Answer Match 54.18%

i'm having problems starting up my windows vista.. when i turn my laptop on there's a screen that comes up showing
"configuration updates: stage 3 of 3 - 0% complete" and after a couple of seconds my computer shuts down, restarts and does the process all over continuously with no option of cancelling this process....
can someone please help

Thank You

A:Windows update configuration problem

Do you know what update your computer is trying to install?

12 more replies
Answer Match 54.18%

Hi all,

Need some extra help here. I attempted to get the debugging tools to read the minidump files post-mortem, but can only get into safe mode, which doesn't help me. I've attached the zip of the output from the jcgriff2 app.

I'm not positive, but it may be related to an attempt to install Spanish & Japanese optional language packs to Windows 7 Ultimate installation alongside a recommended update.

Initially, it crashed during start up at the 'configuring windows' screen at 15% into it. Two system restores later to take me back two updates, and now it returns to the 'configuring windows' screen on startup and crashes at 0%. Not sure if additional system restores will do much good.

Thanks,

- Matt

A:BSOD during Windows Update Configuration

Seems to be related to your USB port/Device and your Nvidia Display drivers

- Remove any unnecessary USB device or plug it in another port

- Uninstall your Nvidia display drivers then use driver sweeper to remove leftover Nvidia files
Guru3D - Driver Sweeper

Then reinstall your display drivers: NVIDIA DRIVERS 260.89 WHQL

This was likely caused by the following module: usbhub.sys
Bugcheck code: 0xFE (0x8, 0x6, 0x5, 0xFFFFFA80067B9000)
Error: BUGCODE_USB_DRIVER

This was likely caused by the following module: nvlddmkm.sys
Bugcheck code: 0xA (0xFFFFFA800B0C1060, 0x2, 0x1, 0xFFFFF80002EDC84C)
Error: IRQL_NOT_LESS_OR_EQUAL

3 more replies
Answer Match 54.18%

hii have created a usb flash via rufus software for setup win 10 in uefi mode then boot my labtop via uefi and during windows instalation steps deleted my MBR partition's and create a new GPT partition after windows file copy and in finishing step an error apear's with this content :windows could not update the boot configuration installation cannot proceed.i tried another usb flash drive & reset bios to defult's but my problem not resolved.do you have any idea to resolve the problem ?thanks.

More replies
Answer Match 53.76%

Hey chaps,

I can't upgrade to Win 10 without upgrading my IE to 11 (for some reason).

Whenever I try and upgrade IE through windows update it fails with Code 9C59 error.

I successfully rolled back IE from 10 to 9 but this made no difference.

I also went through this this list of IE11 prerequisite updates. One of them- KB number 2533623 will not install because 'The update is not applicable to your computer'.

How do I resolve this?

Thanks

A:Cant update IE10->11 because a prerequisite update 'not applicable'

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

7 more replies
Answer Match 53.34%

Hi all,

I tried to install Windows 7 sp1 32-bit on a formatted c drive .But after installing updates this error message pops up Windows could not update the computer's boot configuration. Installation cannot proceed.

I have compaq presario c700 laptop. Earlier I was using windows 7 itself.But after getting startup errors and unable to fix them using bootrec etc utilises I decided to go for a clean installation.

I am booting from USB

Please help.

A:Windows could not update the computer's boot configuration.

Work through the steps to Troubleshoot Win7 Installation Failures here: Windows 7 Installation Failure - Overcome

1 more replies
Answer Match 53.34%

Hi,

I have an Acer netbook running windows 7 starter...for several days each time I close the laptop there are updates that attempt to install but fails to do so for some reason...there are also issues of configuration,seemingly every time I start the laptop.

I have read the uploader tool page but before going through this process would like to ask why the laptop fails to update ? ...I recently got rid of any microsoft office programs...does this have anything to do with the failure to update ?

below are the updates that have failed several times ... sorry but the image is very small !

A:Windows 7 update failures and configuration issues.

It`s a couple of days since I posted the above but the updating failure continues...I`ve no idea if the failure is caused by this laptop not in fact having the required internal programs to ensure the updates are accepted...something is obviously not right.

edit ti add...maybe the laptop just doesn`t need these updates...?

1 more replies
Answer Match 53.34%

I have IE9 currently downloaded as my browser.

I built a website and when I look at my website in browser mode IE10, it?s all off. When I look at it in browser mode IE9, its perfect and were everything should be.

I know to push F12 and change it , but I want to be able to view my website in IE9 PERMINTALLY.

Thanks in advance,
Scott

A:How do I change my Browser Mode: from IE10 to IE9

It should be listed in Installed Updates where you would right click on it then select Uninstall.

This should revert you back to IE9 or IE8, but if you have a restore point prior to upgrading - then you can use that method which will also remove any programs or other Windows updates which have been installed since, so use the Scan for affected programs before effecting the restore.

Windows Updates may auto prompt for their reinstall or you can use Check for Updates in Windows Updates and vet that you don't get any for IE10.

5 more replies
Answer Match 53.34%

Hi. I just updated my W7 64 bit Ult, and as a result now have IE10.

When I start a d/l, and close the browser and d/l window (ctrl+j), the d/l pauses. If I reopen the d/l window, I see it says paused, and then i can resume. A PITA, if you ask me.

Is there any way be able to close both windows and have the d/l continue and not pause? I looked in the IE settings, but did not see anything.

Thanks.

A:How to keep d/ls going when I close the browser and d/l window - IE10

Welcome to Seven Forums JDebny769. No, sorry. If you close the browser, the download window will remain open. But if you close that, you are completely closing down IE. Even Firefox now stops downloads if you close the browser. A Guy

2 more replies
Answer Match 53.34%

I have IE9 currently downloaded as my browser.

I built a website and when I look at my website in browser mode IE10, it’s all off. When I look at it in browser mode IE9, its perfect and were everything should be.

I know to push F12 and change it , but I want to be able to view my website in IE9 PERMINTALLY.

Thanks in advance,
Scott

A:How do I change my Browser Mode: from IE10 to IE9

It should be listed in Installed Updates where you would right click on it then select Uninstall.

This should revert you back to IE9 or IE8, but if you have a restore point prior to upgrading - then you can use that method which will also remove any programs or other Windows updates which have been installed since, so use the Scan for affected programs before effecting the restore.

Windows Updates may auto prompt for their reinstall or you can use Check for Updates in Windows Updates and vet that you don't get any for IE10.

2 more replies
Answer Match 53.34%

We have Windows 10 Pro on a laptop.  We want to set the default browser to Internet Explorer 11 (rather than the default, Edge).  I am familiar with the process of setting "Default apps" in Settings/System in Win 10.  When I choose
"Web browser," I see Internet Explorer as an option.  When I choose IE by clicking on it in the "Choose an app" window, the change does not occur.  The Default apps screen still shows Microsoft Edge as the default browser. 
I should note that the same thing happens when I try to select "Outlook 2016" as the default email program on this screen (nothing changes).
Thanks for any help you can offer with this frustrating problem.

John

More replies
Answer Match 52.5%

After I installed Windows 8, I used the metro IE10 to pin my most used websites tot the metro startmenu. I like the look of it with te icons.
I didn't like ie10 so I installed the Chrome metro app as default browser.

Now all the website icons are replaced by the IE10-logo and they all open in the desktop IE10.

I would like to open these bookmarks with Chrome metro app.

Is it possible to pin favorite websites tot the startmenu with Chrome and more importantly, open these with Chrome?

More replies
Answer Match 52.5%

Im not even sure if I am explaining this correctly. In either browser listed I seem to have an extraordinary delay when I try to go back, close a tab or even click on a new link.  This is fairly recent issue and it is more than just aggravating. I ve cleared the cache in both and even reinstalled chrome with no change 

A:Browser back on IE10 and latest Chrome

Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result. Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop.* Double-click mbam-setup.exe and follow the prompts to install the program.* At the end, be sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and ... Read more

23 more replies
Answer Match 52.5%

For some reason or other I can no longer access my email account Outlook.com (known formerly as Hotmail.com) when using the Internet Explorer10 browser, it will not go to the sign in window, although I can access the account by using the "InPrivate Browsing" option in IE10.

Not a huge problem as I can and do use another browser most of the time. I am curious as to why this has occurred more than anything?

Has anyone else noticed this?

Thanks in advance,

Chris.

A:Can no longer access Outlook.com using IE10 browser?

when using the Internet Explorer10 browser, it will not go to the sign in window



I don't use Outlook but if you want to post a link, I'll see if I can get to it with my IE10 (if that might help).

11 more replies
Answer Match 52.5%

IE10 browser history is not showing google docs https pages

browser history is not showing google docs https pages

I send google docs presentations to pupils in lessons such as this one

if they close their browser I want to say go to your IE browser history and reopen the web page I just sent them.

But the Google docs page does not appear in the IE Browser History !! - I am sure it did in older versions??

I have tried this on my IE 10 at school and home and it does not show.

Can anyone help me with what setting or add on need to make this work????

thanks

Michael

PS this does work in Chrome AND Firefox browsers

link full URL

https://docs.google.com/presentation...d.ge168b30f_00

A:IE10 browser history is not showing google do

Excelguru Help Site - A message to forum cross posters

Your answer did appear where you XPosted.

1 more replies
Answer Match 52.5%

I have a Samsung laptop a few years old - Core i7, 2TB HDD, 8gb Memory. It was supplied with Windows 7 and I have the W7 installation dvd that came with it.

Over the years I have booted from this DVD and re-installed a fresh copy of W7 several times with no problems whatsoever.

A few months ago I succumbed and upgraded to Windows 10 - no problems - it all ran fine.

I wanted to go back to W7 so I deleted all partitions on the HDD, booted from the W7 DVD as usual. Selected country:UK and created a new partition on the HDD (whole of the HDD). Files were copied to the HDD in the usual manner, Windows 7 installed up to 100%, then onto features etc. The installation went with no problems up to the fourth step - installing updates. I though it was a few seconds away from completion and re-boot. However, I then got the message 'Windows could not update the computer's boot configuration'.

Repeated several times, deleting and re-creating partition on the disk but the same happened.

In the end, I installed Windows 10 on the HDD by booting from a USB stick with W10 on and it installed no problems.

Anyone got any idea what it going on? It looks like my install of W10 has changed the disk somehow so W7 cannot ever be installed again on the disk.

More replies
Answer Match 52.5%

Hi. I've got this thing that's been popping up a lot, it's been bugging me for a while. Similar, if not same, problem as the user here: http://www.bleepingcomputer.com/forums/t/412878/constant-popups-appearing-likely-from-mshtaexe/
I tried removing it with MBAM, but it only seemed to work the first time. I scanned, it removed some viruses or malware, and the popup didn't appear for a while after that. Here's a picture: http://puu.sh/r7abK/8aea3a4188.jpg
 
It interrupts me when I'm trying to use other things, like type in a browser or drag a window. Is there a way I can resolve this without downloading half a dozen programs? Something I can manually uninstall or remove? I've got no money so there's no way I can get any premium upgrades for MBAM or similar. Thank you.

More replies
Answer Match 52.5%

Hello Guys I need the experience of some of you relating to the installation of Windows 7 on a GPT partition.
My Boss  gave me a Dell Precision T5810 workstation, and for all I know it came with a factory configuration with three disks 2TB configured in RAID 5, but without Operating System.
He asked me to install Windows 7 and so I tried it but still did not succeed.  On initial installation I provided the RAID controller driver but after that  I am not allowed to do anything on the disk partition.
What I find is the following partitions:
Disk 1 Part 1 ESP 500M
Disk 1 Part 2 DIAGS 40GB
Disk 1 Part 3 OS 2 GB
Disk 1 Part 4 UNALLOCATED SPACE 3700 gb
As mentioned on any of the four partitions i can't do anything  even eliminate them,  and I get this error:
Windows can not be installed to the this. The selected disk is of the GPT Partions.
Now my doubt is Windows 7 can not be installed on GPT partitions and I have to convert force into MBR?
The Four partitions found in your opinion were created when the RAID 5 was configured? 
If i have to convert to MBR i can delete all the partition in order to installa Windows?
Thanks for the GIOvanni

More replies
Answer Match 52.5%

Hi to all, does anyone know why when I click on Digsby (multi messenger client) to go to my inbox windows 8 opens it in explorer tho I have chrome set as default browser? thanks in advance!

A:Dugsby default browser windows 8

Might have to do with this. Try to change it and see if that does it.

http://www.eightforums.com/tutorials...iew-links.html

5 more replies
Answer Match 52.5%

Hi,

I am using Windows 10 64 bit with Opera latest version installed. The problem is I can't set Opera as the default browser, exactly is I can't set any browser as the default except Edge

The screen capture above is the setting window where I tried to set default browser, after click and choose Opera or Firefox, then nothing happen.

When I close the Opera and open again it still asking me "want to set as default browser?"

I searched on Google but can't find the solution to fix this issues, Is this the MS tricks to keep their Edge as the default browser ?
 

More replies
Answer Match 52.5%

Latitude 3450, upgraded to  Windows 10. Under Settings, Default apps, Web Browser, "choose a default appears." I select  Google Chrome but nothing  happens.
Is there a trick?Bro

A:Can't change default Windows 10 browser

Open Control Panel, Search for Default and change it there. Make sure it is reinstalled for windows 10 first. Open Edge and download Chrome.

2 more replies
Answer Match 52.5%

I want to make IE 11 as default browser for windows 10

More replies
Answer Match 52.5%

For curiosity I checked my XP to see what it said was my default browser.
 
sSart>Control Panel>Set Program Access and Defaults>Custom>Expand
 
I got this :-

 
I have Chrome as my default browser. Why does the Windows panel not show it ?

A:Checking Windows XP for Default Browser

Start>Run
Entering "www.google.com", Windows opens Chrome, which means  that Windows does recognise that Chrome is my  default browser, although the default selection panel does not show Chrome as being checked..
 
If it works as shown with no browser nominated as default, then  why have these alternative browsers listed as a default choice ? "Use my  current Web browser" appears to be sufficient.

6 more replies
Answer Match 52.5%

Hi every bodyI downloaded Windows 7 32bit (no key yet), I've tried upgrading Windows Vista SP1 but when step 2 (expandeing files) reaches 21% the installation stops with following error "Windows could not update the computer's boot configuration. Installation cannot proceed."I tried to install Windows 7 in a new partition but the process reaches 27% this time and stops with same error.I've reformatted my hard disks completely and installation process reaches 99% then stops with same error.I checked BIOS settings and found only DVD and HDD listed (no third option).the Microsoft suggestion about the registry tweaking did not apply for me (and I tried to install a fresh copy from scratch).I'm using 2 HDD in RAID0 configuration and works OK with Windows Vista, I did load the drivers to Windows 7 during installation but still getting same problem, any suggestion???

A:Windows (7) could not update the computer's boot configuration. Installation cannot proceed.??

Simple solution found for Dual Boot errors!
 
 Here is an update. Since no one else has seemed to find a solution I actually managed to find my own. Just to recap you on what had happened to me, I was trying to dual boot Windows 7 x64 with Windows Vista Ultimate x64. Somewhere in my use with Vista my BCD was corrupt/deleted and caused this error to appear. (Windows could not update your computer's boot configuration.) After searching my computer I found the registry settings were correct, and file access to the folder that contained the BCD was correct, However my BCD was corrupt/missing and so I was unable to finish the installation and get my computer to dual boot. I found this out by typing bcdedit.exe in command with admin access and it gave me the warning "BCDedit.exe could not be run. BCD is either corrupt or missing".
 
In order to fix this it was quite simple. I had to use the original installation disc for vista to repair my computer's boot files. Unfortunately I didnt have an install disc that would work with vista since I purchased mine before SP1 came out, so in order to repair it I had to create a slipstream disc with the SP1 updates added to it. after repairing I instantly was able to see both Windows 7 and Windows Vista in my boot manager when I restarted my computer. I easily fixed and finished installation with out a hitch, and I'm now staring at internet explorer inside of Windows 7 typing this message. I hope this will help anyone else ou... Read more

45 more replies
Answer Match 52.5%

Windows update was interrupted yesterday and now I'm getting all kinds of errors.

1-SVChost.exe application error Instruction at 0x745f2780 referenced memory a 0x00000000 memory could not be "read". This happens when I try to re update windows and when I boot computer and perodically while searching the internet.

2-No audio device. My sound is only working when the error message pops up.

3-Generic host process for Win32 services has encountered probelm needs to close.
(this occurs when I boot up computer)

4-unable to create C:/document and settings/jamie/application data/BVRP Software Netwaiting Moth log txt.file (this happened when I booted computer

I called dell as the system is only 4 months old, and i have warranty, however they informed me that for software related issues they would charge 264.00!!!

You could say that I'm rethinking my purchase choice.

Any help would be greatly appreciated!

Thanks so much
 

A:SVC host.exe error message-windows update, configuration problem

did a system restore to a checkpoint on monday, when all was well. Fixed the sound problem, but still getting the error message about SVChost and the Win 32 one.
 

2 more replies
Answer Match 52.5%

Since the updating to ie 10 my internet is very slow but only on the external monitor.  If I use the laptop  internet comes up fine on the laptop but the monitor is way behind.  When I type on the monitor it is a good 20 - 30 seconds befor it appears yet it shows on the laptop monitor. Any solutions?

A:Update to ie10

I'd remove IE 10...then see if issues remain with IE 9 or a different browser...before going any further.
 
Louis

1 more replies
Answer Match 52.08%

hi there,

I am thinking to upgrade to IE10 since i just understood that some BASIC functionalities of gmail are gone (cannot attach multiple files, cannot see progress during attachment) after they introduced this lovely "new compose", so either i switch email or i need to upgrade from IE9.

Personally i like IE9, is fast and works OK, occasionally i get the "this tab has stopped working" with the RED x but is no big deal, happens rarely.

After all, IE10 has been around for a while now and i bet that there's been several patches for it so i'd like how it's working right now, and if there are any major issues with it.

Many Thanks
Gabrio

A:IE10, Long time in, Good Or Not? What's the status of the browser?

I have ie10 on two machine with very few issues,
I also have Google toolbar installed and use gmail so I can say I'm not having any issues with either,
There is a few tweaks which I've learned to use for a better experience which also apply to ie9 as well,
Adobe shockwave player is probably the biggest role player in how well ie9 or 10 operates/ I usually run with it Disabled and only enable if a I want to watch a video,
I've found little to no need for Java from Oracle so Uninstalling it might help a bit and making sure the Java deployment kit is disabled/ haven't found a way to completely remove Java deployment as of yet ?
http://www.java.com/en/download/faq/...erversions.xml
http://www.java.com/en/download/help/uninstall_java.xml
I've also found Alt+TB or Menubar/ Tools/ Compatibility view settings/ Uncheck Download comp-view lists from Microsoft automatically and good thing to do/ except for Intranet leave Checked and of course Uncheck view all sites in comp-view. will help either version of ie.
Attachment 282075
But as always there can be third party Security suites which will not understand and therefor block Internet explorer's processes so Please state what you use Microsoft security essentials is popular on this and many other help forums,
For added security you can add another popular one Malwarebytes Pro/ very cheap and works well with MSE,
http://windows.microsoft.com/en-US/windows/products/security-essentials
http://www.malwarebytes.org/products/malwarebytes_free... Read more

9 more replies
Answer Match 52.08%

Hi there
I've tried to KILL this wretched browser questionnaire - I'm using W8 Enterprise RTM ( X-64) from TechNet -- US version.

If I click Continue --IE just offers all sorts of B/S about IE9 (nothing about IE10) and just Hangs if I try and go further.

If I delete the whole wretched piece of B/S I just get prompted again the next time I connect to the Internet.

What's up here -- I got my copy of W8 from a LEGAL subscription -- US, my registration is Iceland -- not yet (and maybe never) a part of the EU -- at least not until after a forthcoming referendum, but just because I logon on via a Hotel's wifi system in Brussels I get prompted for this B/S browser stuff.

OK if it works but at least it should offer current versions like IE10.

The whole thing is total nonsense anyway --but at least it SHOULD WORK.

My browser is currently IE10 -- I don't need all this B/S to install IE9.

Screenshot enc.

Cheers
jimbo

A:Help please -- BROWSER EU Chice kills IE and doesn't offer IE10

Hi jimbo,
Have you tried uninstalling the Browser Choice Screen Update(KB976002)?

3 more replies
Answer Match 52.08%

I don't have access to an install disc or boot CD. I am running Windows Vista 32 SP2. I can not get updates for any anti-virus/spyware program or install them if a download is required. I do get updates for Malwarebytes and can run most of the anti-virus programs. MB did find a couple of problems and fixed them. Avast also found a few problems and fixed them. Now when I do a search none of my programs find anything but I am still not able to update anything but MB and am getting redirected in my internet browser.


DDS (Ver_09-12-01.01) - NTFSx86
Run by oemuser123 at 18:04:08.99 on Sun 01/31/2010
Internet Explorer: 8.0.6001.18882
Microsoft? Windows Vista? Home Premium 6.0.6002.2.1252.1.1033.18.2047.1364 [GMT -6:00]

AV: Norton Internet Security *On-access scanning enabled* (Outdated) {E10A9785-9598-4754-B552-92431C1C35F8}
SP: Windows Defender *disabled* (Updated) {D68DDC3A-831F-4FAE-9E44-DA132C1ACF46}
SP: SUPERAntiSpyware *disabled* (Updated) {222A897C-5018-402e-943F-7E7AC8560DA7}
SP: Norton Internet Security *enabled* (Outdated) {CBB7EE13-8244-4DAB-8B55-D5C7AA91E59A}
FW: Norton Internet Security *enabled* {7C21A4C9-F61F-4AC4-B722-A6E19C16F220}

============== Running Processes ===============

C:\Windows\system32\wininit.exe
C:\Program Files\AVG\AVG9\avgchsvx.exe
C:\Program Files\AVG\AVG9\avgrsx.exe
C:\Windows\system32\lsm.exe
C:\Program Files\AVG\AVG9\avgcsrvx.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\nvvsvc.exe
C:\... Read more

A:HELP!!! Can't update Antivirus programs or install, also getting redirect in browser

BUMP, please

15 more replies
Answer Match 52.08%

I'm running on windows 8 and would like to set my default browser to nothing whatsoever or a junk program. My aim is to make it so that whenever malware or any program attempts to open a browser nothing whatsoever happens.

Is this possible, through editing the registry in some way, and will it have the effect I'm aiming for?

A:Windows 8, how to set default browser to nothing or a junk program

Malware would still easily be able to open a browser or any other program even if you change the default to nothing or redirect the default setting to something else. Your best bet would be to install a good quality antivirus to detect and block any malware in the first place.

1 more replies
Answer Match 52.08%

Hi Expertz,
I am trying to make IE 11 as default browser in windows 10 1511 machine & following link below

https://technet.microsoft.com/itpro/internet-explorer/ie11-deploy-guide/set-the-default-browser-using-group-policy
My followed steps are::
 
1>     1> 
Taken a windows 10 1511 reference machine where IE11 was made default browser manually from settingsāsystemsādefault
appāset defaults by app?select IEāset this program as defaultā
OK
2>     
2>Exported this default app changes using dism
>Dism /Online /Export- DefaultAppAssociations:c:\defaultassociations.xml
 
3>     
3>Copied this xml file from ref VM & paste in DC in location
c:\windows\system32\defaultassociations.xml
In Domain Controller side
 
4>     
Winkey + R-->Gpedit.msc-->computer
configuration-->Administrative template-->Windows
ComponentsāFile explorerāset
a default association configuration file -->enable
In option tab-->paste-->c:\windows\system32\defaultassociations.xml

4>
1>     
In client VM verified whether policy has been appliedāwinkey
+Rācmdāgpupdate
/force
Gpresult /scope computer /r
 
2>     
IE11 was not set as a default browser in settings in client windows 10 VM

Guys I could be missing somewhere, Kindly... Read more

More replies
Answer Match 52.08%

Am right now using windows 7. The default view in my windows browser view is detail I want to change it to large icons. Please explain if you know a way to do so.....
Thanks

A:how can one change the default windows browser view

  
Quote: Originally Posted by shivam64


Am right now using windows 7. The default view in my windows browser view is detail I want to change it to large icons. Please explain if you know a way to do so.....
Thanks


Shivam

Hi and welcome to seven forums

I think you mean this, but im not sure.

Icon Size - Change in Windows Explorer Window

Ken

3 more replies
Answer Match 52.08%

I used the free Windows 10 upload from Microsoft to update my computer from Windows 7 to Windows 10. Windows 10 was working great, then all of a sudden a couple of days ago, I kept getting fatal error messages, my computer was connected to the Internet but programs kept telling me I wasn't. I could not print, could not open my email in Yahoo. I would open Internet Explorer and the page would be completely blank but yet I was connected to the internet.
My computer is hard connected to my modem, not wireless. Called my internet provider and they could not find any problems with my connection.
I tried all the suggestions on Microsoft's Forum, like deleting SpyHunter and using my command prompt and running DISM and SFP (I think, can't remember) but they kept coming back no problems found.
So today I decided instead of using Internet Explorer, I would use Google Chrome. It worked, no problems!! So I set my default as Chrome and now all my problems, so far, are gone. Can anyone explain this phenomenon to me?

A:Had to make CHROME my Default Browser in Windows 10

You are lucky! If I set any browser other than edge to be the default, I get all sorts of problems and error messages. So I have to leave it set to edge. I then use Firefox, as I have not used IE for the last 10 years due to its total lack of work-ability. Edge is just the same, but if you ask Cortana a question it always answers in Edge. Why does Microsoft not just get out of the browser business, and leave it to people who know how to construct a browser? Incidentally, Cortana will help if I type in the text box, but does not seem to have any language for British English that I can find, so there is no chance of "Ask Cortana" using a microphone.

1 more replies
Answer Match 52.08%

Hi,
I've been using Windows 8 since the Developer preview and I've had no problems with it until now.

I recently got fed up with Firefox (for being too slow, and buggy). so I installed Chromium (not chrome. Chromium, the open source version of Google chrome without that spyware Google puts in it's browser)

But I have a big problem with it - I can't set it as my default browser. If I go to the settings and and click the big button that says "Make Chromium your default browser" all I get is this.
>> Quick translation in English>>

Code:
How would you like to open this type of a link (http)?
Keep using: Nightly
Internet Exploder
Find apps from the store


I've seen many tutorials about adding default software, but for some reason chromium isn't listed in the "default apps" section of control panel.

Is there a way to navigate to a certain .exe to add it as a default?

A:Setting chromium as the default browser in Windows 8

Hi,

See this post of mine, especially the last two links. The whole thread is about a similar problem, actually.

Vadim

2 more replies
Answer Match 52.08%

I would not normally come whining and crying to you folks but I am not able to solve this one myself.

This is a new install of Windows 10- done yesterday and Firefox was installed today.

Using Firefox or Default apps in Windows 10, I cannot make Firefox the default browser. Giving the instruction in Firefox, nothing happens. In Windows 10 Default Apps when I select Firefox, it kicks back to default and has a message "Reset to Microsoft Recommended Defaults".

A Windows 10 computer about 5 feet away from me has Firefox as the default browser but it was done in July.

Google was no help so far so do any any of you experts have an idea what may be happening?

As always, I will be forever in you debt.

Many thanks.

More replies
Answer Match 51.66%

i have a question for eveeybody on this forum regarding last Patch Tuesday after installing updates haas anybody else been having an issue playing youtube videos as i have been having some issues after Tuesday and if anybody has an answer can they tell me which update and the KB article so i can get it off my computer thanls

A:IE10 security update and others

Adobe released a FlashPlayer update recently - are you sure that isn't the cause?
What exact problem are you having?

3 more replies