Tech Problem Aggregator

Unable to turn off windows feature .net framework 3.5

Q: Unable to turn off windows feature .net framework 3.5

I have recently ran the net cleanup tool trying to fix an issue (making a clean reinstall), but what I didn't expect would happen, did. I am now stuck where my windows 7 64 bit system does not have net framework 3.5 but thinks it has withing the "Turn off windows features" dialogue. I have attached a DISM log if it helps.

Things I've tried already:
- DLL Purgatory: Unable to Turn On .NET Framework 3.5.1 {PEN001}
- Installing .net framework 3.5 sp1 - received error message that I should remove it in turn off windows features.
- Running cleanups & all automated fixing methods I've found.
- SFC /Scannow - Did not help, returned error. Log attached.
- Installing .net framework 4 - It installs successfully, but does not fix any of my problems as the program im trying to run seems to need net framework 3.5 - The program is Catalyst Control Center, which I am trying to fix. The problem is that it won't, no matter what I do, display any dialogues. It is running in the system tray and all, but won't display. I did manage to get one (yes just one) .Net framework crash with it, so I started fixing it, and instead, ruined it and made my case even worse.

Now I am asking for professional help because no matter what I do I seem to ruin it.

Thanks in advance.

Catalyst info:

Tried every single guide I found on google for fixing any issues related to this. Has been tons of restarts and even more reinstalls, nothing seems to work. For anyone wanting to mention the "Remove the key named ... from %windir%\assembly I'll tell right now that it doesn't even exist there. Tried several versions of the installers. I am running crossfire (which is the start of all this hassle) which I wanted to configure, but then discovered I could not open the control center. Been struggling this for three days now, very annoying. If there is no way to fix this I'll do a reinstall, but I don't really want to do it, as I've set up this system exactly how I want it. (which took several hours of configuring and modding. And no, I haven't modded anything big, which could relate to this issue). If you mean I should reinstall my windows 7, please tell me of any programs that can be used to copy over all settings and files, but not the windows 7 system files

Catalyst topic again:
I've been a lot into the safemode and performed driver sweeping with driver sweeper and a few others while trying to reinstall this just to check if it wasn't .net framework that was the error.

Last option:
If anyone knows an alternative to the catalyst control center (which does the same things. Modifies the same configs etc.) I'd be more than happy

I have not seen any posts with any of the same issues like me on the internet while I've been searching, which is the reason why I post here.

Note: Cut out a little from the CBS log as I believe it was irrelevant and waay too old for this error.

A: Unable to turn off windows feature .net framework 3.5

Is it allowed to bump here?

9 more replies
Answer Match 63%

You know how when you have a Windows' window that is partially off screen and you move the mouse over that window towards the edge of the screen where the window goes off screen how Windows automatically moves the window back fully onto the screen? What's that feature called?

And, more importantly, how do I turn it off?

A:How do I turn off that feature which auto moves windows on screen?

Hello,

I'm not sure what you are wanting to turn off about that. As far as I know, it's not possible to disable the ability to Restore/Move an offscreen window back.

Offscreen Window - Move Back to Desktop

If this is not what you meant, then could you give more details and a screenshot to help clarify more?

9 more replies
Answer Match 62.16%

Friends,

I am having problem with view windows updates is showing blank, and Turn windows feature on or off as blank,
i am having Windows 7 Home Basic, can any one shout out my problem.

Please suggest me solutions.
 

A:Problem with view windows updates and Turn windows feature on or off .

16 more replies
Answer Match 61.32%

I am running Windows 7 Home Premium (SP1) on a fairly new machine. I ran malware and McAfee scans which were all clean. I also ran Aaron Stebner's .NET Framework setup verification tool (which was clean as well). I have been using a software program that uses "Microsoft .net 3.5". We have been having some issues with the program and were advised to turn on the following Windows features:Control Panel>Programs>Windows Features>Microsoft .Net 3.5>two checkmarks below thisI have repeatedly checked these, tow at a time, one at a time, etc and the system will give me a "wait message", state that all of the features could not be started and request a re-boot. Upon a re-boot, neither of these features are checked.I have also attempted to re-install 3.5 (and the program itself). We have been unable to re-install 3.5 (it appears to start but just disappears without any confirmation whatsoever). When I look in programs I have Microsoft .Net 4.0, which apparently is the "parent" of 3.5I have also entirely removed both McAfee & Malwarebytes thinking these may have been blocking us, all to no avail, does anybody have any ideas?Thank you anybody in advance!Oh, by the way, system restore is also failing!

A:Microsoft .net framework 3.5 Windows Features Won't turn on

The Stebner tool...is for removing all versions of NET Framework. It does not do anything else.http://msdn.microsoft.com/en-us/kb/kbarticle.aspx?id=318785I would use Mr. Stebner's tool...or simply go to Add/Remove Programs and uninstall each Framework install in reverse order (most current first)...then install Framework 3.5, SP1, http://www.microsoft.com/en-us/download/details.aspx?id=25150 . Note: If using Add/Remove Programs, do not bother with any critical updates which may have been made to a given version...just uninstall NET Framework 4.0 and NET Framework 3.5 (if installed).IF you want/need to reinstall NET 4.0, http://www.microsoft.com/en-us/download/details.aspx?id=17718 .I've never had to do anything to "set up" any version of NET on any of my systems...it just installs. Well, I believe a reboot of the system is necessary but I don't consider that a setup procedure.Louis

3 more replies
Answer Match 60.9%

I need to run my .net aaplication Win8.But when tried to run, a pop up comes and ask to turn on the .net feature.
I tried turning on this feature from control panel but it fail everytime.

Is this a known issue with Win8? Any thought on how can i run my .net application in Win8.

A:.Net framework feature is not getting tuned on in Win8.

Same issue. Installing 3.5 on build 8102

9 more replies
Answer Match 60.06%

Hi All, I am having difficulties on enabling Hyper-V on my P50. I have enabled the Virtualization setting within P50 BIOS. Have also turned off the P50, wait for a minute and then turned it back on. Everytime I enabled the Hyper-V feature, during the required restart Windows Update process shows failure to update and performed a rollback. My P50 system info is as below:Host Name: P50OS Name: Microsoft Windows 10 ProOS Version: 10.0.10586 N/A Build 10586OS Manufacturer: Microsoft CorporationOS Configuration: Standalone WorkstationOS Build Type: Multiprocessor FreeProduct ID: 00330-80106-07335-AA055System Manufacturer: LENOVOSystem Model: 20ENCTO1WWSystem Type: x64-based PCProcessor(s): 1 Processor(s) Installed.[01]: Intel64 Family 6 Model 94 Stepping 3 GenuineIntel ~2492 MhzBIOS Version: LENOVO N1EET41W (1.15 ), 12/31/2015Windows Directory: C:\WindowsSystem Directory: C:\Windows\system32Boot Device: \Device\HarddiskVolume1System Locale: en-us;English (United States)Input Locale: en-us;English (United States)Total Physical Memory: 65,402 MBAvailable Physical Memory: 60,918 MBVirtual Memory: Max Size: 75,130 MBVirtual Memory: Available: 70,661 MBVirtual Memory: In Use: 4,469 MBPage File Location(s): E:\pagefile.sysLogon Server: \\MicrosoftAccountHotfix(s): 6 Hotfix(s) Installed.[01]: KB3116278[02]: KB3120677[03]: KB3140743[04]: KB3149135[05]: KB3167685[06]: KB3163018Hyper-V Requirements: VM Monitor Mode Extensions: YesVirtualization Enabled In Firmware: YesSecond ... Read more

A:[P50] Unable to enable Hyper-V feature (Windows 10...

Is there any detailed error message in System Event Log ? Check this https://msdn.microsoft.com/en-us/virtualization/hyperv_on_windows/quick_start/walkthrough_compatibil... namely the Verify Hardware Compatibility paragraph.




__________________________________ThinkPad (1992 - 2012): R51, X31, X220, Tablet 8.Do you care about privacy and security ? Leave Google behind

2 more replies
Answer Match 59.22%

I have recently changed my Windows XP to 7 and I want to Install Windows Media Player on my PC but my Windows 7 doesn't install it because it seams not to have media features included( It is Windows 7 N). Therefore, I went to this website (Download Media Feature Pack for Windows 7 N with Service Pack 1 and Windows 7 KN with Service Pack 1 (KB968211) from Official Microsoft Download Center) and downloaded its 32 bit version (Windows6.1-KB968211-x86-RefreshPkg.msu) since my computer's system type is 32-bit. However, after I downloaded it, I tried to install it but a pop-up window keeps appearing which says :" The update is not applicable to your computer". I am sure that I have downloaded correct version of the feature pack. I am very much distressed and I don't know what to do. I appreciate anyone who can suggest me a useful solution to tackle this problem because it is urgent and I have to install it.
Thanks

A:I am unable to install Media Feature Pack on my Windows 7

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

1 more replies
Answer Match 56.7%

Hello dear community,
I have now tried to install .NET Framework for several months, but nothing worked for me. I used the following methods:
- Installing it offline via "dism /online /enable-feature /featurename:NetFx3 /All /Source:F\sources\sxs /LimitAccess", and yes, this is the directory where the folder is. I also ran cmd.exe as an administrator. It instantly goes up to 99.8%, stops
for about 10 seconds, and then returns the error. Here's a screenshot: http://prntscr.com/1eh1x1
- Enable it with Control Panel -> Programs and Features -> Turn Windows Features on or off -> .NET Framework 3.5 (includes .NET 2.0 and 3.0)
- Typing "lodctr /r" into administrative cmd.exe and tried the step above again

Here's my DISM log-file: http://www.mediafire.com/view/j71dpfqf47uif5i/dism.log

I really hope than you can help me.

Regards,
Nick

A:[Windows 8] Unable to install .NET Framework 3.5 - Error:0x800F0922

read my first sentence. You miss a ":" ."A programmer is just a tool which converts caffeine into code"

9 more replies
Answer Match 55.02%

I bought a E520. I am not liking the touchpad on this thing. It hangs up and does not respond a lot of times. The biggest thing that irks me is that my screen will zoom in and out when I run my finger along the touchpad or when tapping it. I know you can use the "pinch" with two fingers to zoom in and out but mine will zoom with just a tap of one finger. Someone must know how to disable the zoom feature. Can you describe in detail to me how to do that? I called Lenovo support about it and the guy said it might be a software or hardware problem and told me to take it into a repair facility. There must be a way in settings to turn that off. I just want the touchpad to work normally, as in move the cursor around.. thats it, nothing more. Can someone help me with this??











Solved!
Go to Solution.

A:How to turn off zoom feature on touchpad

In Control Panel go to Mouse -> UltraNav -> TouchPad Settings -> Application Gestures -> Pinch Zoom -> uncheck the Enable Pinch Zoom box. Enjoy! I did not like it either! You can fine tune all the touchpad features to your liking right there.




E420, i5, 8GB, 500GB/7200, 32GB mSATA, Win 8.1 Pro x64T61, 4GB, 500GB Hybrid, Win 8.1 Pro x64

6 more replies
Answer Match 55.02%

I tried Googling this but all I found was how to turn on/off Aero completely. I'd like to turn off just the part that makes the boarders around window panes translucent; I think it's called the 'glass' effect.'

I've always have had it turned on, but recently it's bugging me as I keep closing the wrong window(s). Yes, I know I should be paying better attention...

A:How to Turn Off Aero 'Glass' feature?

Hello TDKMate,

The tutorial below can help show you how to enable or disable only Aero Glass.

Transparency - Enable or Disable

1 more replies
Answer Match 55.02%

It seems like every time I move my mouse, whatever I'm looking at zooms in or out and it's driving me crazy. How do you turn this feature off?

A:Yoga 900 - How do I turn off the zoom feature on t...

Open up Mouse in the Control Panel.
There should be a way to get to Touch Pad Properties.
From there you want to select Application Gestures. 
Then, Pinch Zoom.
Finally, make sure the box next to "Enable Pinch Zoom" is not selected.
 
?

 

1 more replies
Answer Match 54.18%

 Hi, I am sure that the auto-maximize is useful but there are occasions when I want to push a window out of the way to the top of the screen. I use this so I can either keep it open and work on other windows or when I have a large spreadsheet and every pixel is needed. It would be useful to over-ride it by holding down a key(s) for those occasions. Narfle the Garthok!

More replies
Answer Match 54.18%

hi, i want to convert my hard disk from bios mbr to uefi-gpt fortmat, but i can't find anywhere in the bios setup (press f10 when boot pc) the entry called "uefi" . I just downloaded n installed Hwinfo32, the app said my laptop supported UEFI but it is not turned on yet. So my question is HOW CAN I TURN THE UEFI feature on? Thanks for ur answer in advance!btw, i just updated the bios to f48 version but no thing has changed. 

More replies
Answer Match 54.18%

I just did a clean install of 64-bit Win 10 Preview Build 14951 from an install.esd converted to an iso image. I go to Turn Windows features on or off and check the box marked Windows Subsystem for Linux (Beta). When my system reboots, an error message flashes by so fast, I can't read it and Bash isn't installed. I have Developer mode turned on and am an administrator on this computer. FSC /scannow and DISM show no errors at all. I really don't want to have to reinstall Windows.
What else can I do?

TIA

Tom L

More replies
Answer Match 54.18%

I have MS Visual studio 6 installed on my PC, and whenever an IE page has an error on it (like undetermined string constant for example), an error message will popup saying to click yes to debug or cancel. If you click yes (which I constantly do accidentally), it will close the IE windows and open up the debugger, which is then a hassle to exit out of.

This is very annoying and slows down browsing the web, so is there a way to turn off the debugger so it does not check for errors or anything when using IE, and so no error messages pop up?
 

A:MS Visual Studio - turn off debug feature for IE

Yup, in IE, Tools>Internet Options>Advanced>Disable script debugging, make sure it's checked....had the same problem when I installed VS6.

MBN
 

1 more replies
Answer Match 54.18%

I'm currently in Italy and when I try to visit certain web sites with .com extensions IE 7 re-directs me to the Italian .it web page. Problem is...I don't read Italian yet.
Please provide advice on how to turn this feature off.
I've already checked Internet Options> General> Languages, and made sure that English (United States) is at the top of the list.
Any help would be greatly appreciated! They’re some web sites I need to visit but I keep getting redirected to the Italian (.it) page....frustrating.

Thanks in Advance
 

More replies
Answer Match 53.76%

Hi all
I pressed something by accident on the mouse -- now I've got this really annoying large square box with magnified text inside it instead of a regular mouse cursor

How do I switch this off and also PERMANENTLY disable this really ANNOYING feature.

I've no idea what I pressed when moving the mouse but it really is irritating.

cheers
jimbo

A:Annoying Magnifier glass feature -- turn off and disable

Hello Jimbo,

This may help mate.

Magnifier Starts at Startup - Enable or Disable

and

Magnifier - Turn On or Off - Vista Forums

3 more replies
Answer Match 53.76%

So we all know that in Windows 7, the .NET Framework is already included with the system. With my system, the .NET Framework is currently turned off. Frankly I don't like .NET and I find that its only used during installation of programs; once the program is installed, I usually get rid of .NET and call it a day. I've been doing this for a long time, and I've been running Windows 7 since August without any issues.

Now I need to turn .NET back on so that I can install a program... but I can't. When I try to turn on the .NET Framework in the Programs and Features menu, I get the following error:

An error has occurred. Not all of the features were successfully changed.

Also be advised that I have done a TON of services.msc editing over the course of the months. The System File Checker also found no errors.

A:Can't Turn On .NET Framework?

You've probably disabled some needed service, as I'm sure you're aware; disabling services in Windows 7 causes more problems that it sorts, unlike back in the old XP days.

I'm sure you're also aware that it's going to take a bit of trial and error to sort it out.

8 more replies
Answer Match 53.34%

Hello, Toshiba!

With the "Hardware Setup" program I set the _automatic switch on_ my notebook NB 510 _after lift the display_. Unfortunately, I _can not disable_ this feature.

I have tried in the "Control Panel - Power" to disable this function, I tried to disable this function by hardware setup, but to no avail.

When I check "disable the automatic inclusion" and reboot my notebook, but nothing has changed.
Also I reinstalled windows, I took out at 8:00 the battery from the motherboard, cut off the power to the notebook and remove the main battery, unfortunately, nothing did not help.

This function is inconvenient for me, because when the laptop in my backpack, it sometimes turns on itrself and the battery is very low.

How do I disable the automatic inclusion?...

OS: Windows 7, Windows 8, system BIOS version 1.40, EC Version 1.00, feature "Panel Open - Power On" (tab "Power Managment") in BIOS disabled, but it still works...

I really waiting for any answers, thanks a lot!

p.s. sorry for my bad english, it is automatic google translate.

A:NB510: Automatic wake-up after lift display: can not turn off this feature

I have NB520 and it works properly (I can disable it).
Try please to enter BIOS and set it to default settings using F9 and then save and exit with F10.

7 more replies
Answer Match 52.92%

I have looked all over the place and have even been tempted to call Microsoft's tech support if they had one and could find the number.
 
But I can't imagine its that hard to turn on/enable .NET Framework. I am running XP Home. I have found the ways how to do it in Windows 7 and 8 and thought it might be similar for XP, not the case or maybe it is and just haven't found it or its buried somewhere. I thought something like the attached screenshot would be easy enough to find to do it and seems it is for 7 and 8. I've been told its easy as checking/unchecking a box.
 
Again the attached image is what I am hoping is what I have to find on my OS but I believe its from Windows 7, 8 or maybe Vista but not sure as I don't have any experience with them.
 

A:How to turn on/enable .NET Framework

Apart from the Media Centre and Tablet PC editions, .NET Framework was not an OS component and so will not appear in the Add/Remove Windows Components list.
 
If it has been installed, .NET Framework will appear in the Add or Remove Programs list, so if it's not there you will need to download and install.

4 more replies
Answer Match 52.5%

I have no idea how to turn on the backlit keyboard feature. There is a button (f10) which is supposed to turn it on, but when I press it nothing happens. Would appreciate some help here! Thanks. 

A:Just bought a Dell Inspiron 15 7000 - How do I turn on the backlit keyboard feature?

DellJezz,

Contact Dell Technical Support and they can help with this issue. Since you have the sticker, if it's not working, the cable may have come loose.
Rick

18 more replies
Answer Match 52.5%

I have started a topic recently at http://www.bleepingcomputer.com/forums/topic372096.html and was unable to resolve the problem after following all the suggestions provided by members of the forum. I ran MBAM full scan in safe mode again (just before posting) and it detected some adware due to a program I have installed recently.I managed to scan using DDS smoothly but was unable to follow the steps to Gmer.exe. All the options are unchecked (greyed boxes) except for Services, Registry, Files, ADS and Drives/Partition (C:\ was checked). I ran Gmer.exe with this and attached are Attach.txt and Ark.txt.Below is the DDS logDDS (Ver_10-12-12.02) - NTFS_AMD64 Run by Vicky at 11:57:22.54 on Fri 21/01/2011Internet Explorer: 8.0.7600.16385Microsoft Windows 7 Home Premium 6.1.7600.0.1252.65.1033.18.3892.1987 [GMT 8:00]AV: Microsoft Security Essentials *Enabled/Updated* {BF5CEBDC-F2D3-7540-343C-F0CE11FD6E66}SP: Microsoft Security Essentials *Enabled/Updated* {043D0A38-D4E9-7ACE-0E8C-CBBC6A7A24DB}SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}============== Running Processes ===============C:\windows\system32\wininit.exeC:\windows\system32\lsm.exeC:\windows\system32\svchost.exe -k DcomLaunchC:\windows\system32\svchost.exe -k RPCSSC:\Program Files\Microsoft Security Essentials\MsMpEng.exeC:\windows\system32\atiesrxx.exeC:\windows\System32\svchos... Read more

A:Unable to turn on Windows Firewall

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. Click the Watch This Topic button at the top on the right.

Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.

Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

37 more replies
Answer Match 52.5%

I have reciently aquired a virus and I think I have removed it. However my windows firewall will not turn on. The bubbles are greyed out and I cannot click on the on bubble. Here is my HJT file. Can someone help me? Thanks.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:37:04 PM, on 11/5/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16735)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\Program Files\Microsoft LifeCam\MSCamS32.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Logitech\G-series Software\LGDCore.exe
C:\Program Files\Logitech\G-series Software\LCDMon.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\PROGRA~1\SYMANT~1\VPTray.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\Program Files\Logitech\G-series Software\Applets\LCDMedia.exe
C:\Program Files\Logitech\G-series Software\Applets\LCDClock.exe
C:\Program Files\ATI Technologies\ATI.ACE\Core-Static\MOM.EXE
C:\WINDOWS\vVX... Read more

More replies
Answer Match 52.5%

Hi im using windows Xp home and i need to turn of the firewall so i can file share between 2 computers but when i go onto windows firewall settings i can not turn it off it only allows the default (on). hear is a picture.

 

A:unable to turn of windows firewall

9 more replies
Answer Match 52.5%

Hi, I am having a problem turning my Windows Firewall on. When I try through the Security Center it gives the error message 'Security Center can't turn on Windows Firewall'. If click the link to turn it on manually I get 'Windows cannot start the Windows Firewall service'. I'm not sure what the virus/malware is called that causes this. I have done a couple of scans using Malwarebytes Anti-Malware, and after removing a couple of suspect items it seems to be clear. Just leaves the Firewall issue.
I am using Windows Vista 32 bit, and below is my FRST log, wasn't sure exactly what log would help.
 
Scan result of Farbar Recovery Scan Tool (FRST) (x86) Version: 11-03-2015
Ran by Lee (administrator) on MORRELL-PC on 05-04-2015 20:47:23
Running from C:\Users\Lee\Desktop
Loaded Profiles: Lee (Available profiles: Lee & Simon & Terri & Mcx1)
Platform: Microsoft® Windows Vista™ Home Premium  Service Pack 2 (X86) OS Language: English (United States)
Internet Explorer Version 9 (Default browser: IE)
Boot Mode: Normal
Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/
 
==================== Processes (Whitelisted) =================
 
(If an entry is included in the fixlist, the process will be closed. The file will not be moved.)
 
(NVIDIA Corporation) C:\Windows\System32\nvvsvc.exe
(Microsoft Corporation) C:\Program Files\Microsoft Security Client\MsMpEng.ex... Read more

A:Unable to turn Windows Firewall on

Happy Easter! & to Bleeping Computer Forums!
My name is Jürgen and I will be assisting you with your Malware related problems.
Before we move on, please read the following points carefully:
My native language isn't English. So please do not use slang or idioms. It could be hard for me to read. Thanks for your understanding.
Please read my instructions completely. If there is anything that you do not understand kindly ask before proceeding.
Perform everything in the correct order. Sometimes one step requires the previous one.
If you have any problems while you are follow my instructions, Stop there and tell me the exact nature of your problem.
Do not run any other scans without instruction or Add/ Remove Software unless I tell you to do so. This would change the output of our tools and could be confusing for me.
Post all Logfiles as a reply rather than as an attachment unless I specifically ask you. If you can not post all logfiles in one reply, feel free to use more posts.
If you have illegal/cracked software, cracks, keygens, etc. on the system, please remove or uninstall them now!
If I don't hear from you within 5 days from this initial or any subsequent post, then this thread will be closed.
If I don't reply within 24 hours please PM me!
Stay with me. I will give you some advice about prevention after the cleanup process. Absence of symptoms does not always mean the computer is clean.
Multiple Anti-Virus-Software Warning
It is inadvisable to have more than one... Read more

15 more replies
Answer Match 52.5%

So for the past two days I've had a weird problem with my laptop after it ran out of power.  It didn't want to connect online but that was fixed with command prompts and now the firewall is turned off. I've done a malwarebytes scan in safe mode with nothing found, tried doing some troubleshooting in the services and so on and so forth. 
 
Basically when I try to turn on the firewall it says that it needs to be done manually and then when you try to turn it on manually it comes up with error code 0x8007042c.  I've tried turning on the service but I get "Error 1608: The dependency service or group failed to start."
 
 

A:Unable to turn windows firewall on

Hi,
Have you tried all steps listed at http://support.microsoft.com/en-us/kb/2530126 ?
Did you have any threat infection or removal around the time all these problems started?
Can you briefly describe what was the problem with network connections?

5 more replies
Answer Match 52.5%

I am unable to turn on Windows defender. Using a hp pavilion entertainment pc. Pavilion dv5 running Windows Vista sp2
Error code 0x800705b4
I believe there are strange things happening to this notebook. I also can't open the Windows sticky notes... about to run malware bytes, spybot, rkill and Windows essentials of I can get these programs to work....
Any help would be appreciated

A:unable to turn on Windows defender

Did you check to make sure the Windows Defender service is running?These are instructions for restarting Windows Defender if it has been stopped...How to Start/Stop Windows Defender serviceTo start (enable) a service, press the WINKEY + R keys on the keyboard or click the Start Orb > Run...,and in the Open dialog box, type: services.mscClick OK or press Enter.Note: You can also click the Start Orb and in the Search Box, type: services.mscWindows Services will open:Click the Extended tab at the bottom to view all the info on your services.In the Services applet, scroll down the list and find the Windows Defender service.Double-click on the name of the service to open the Properties page.In the Properties Window > General Tab that opens, click the "Start" button if it is stopped.From the drop-down menu next to "Startup Type", click on "Automatic".Click "Apply", then "OK" and close any open windows.Also see:Windows Defender is turned off or not working

26 more replies
Answer Match 52.5%

A while back I had a virus and was able to remove it but it left problems that I just recently discovered.  Primarily I'm unable to restore the defaults for the firewall.  I'm also unable to turn on the following services:
 
Function Discovery Resource Publication  Error 0x80070005: Access is denied
 
HomeGroup Listener  The HomeGroup Listener service terminated with service-specific error %%-2147023143.
 
The Windows Firewall service terminated with service-specific error Access is denied..
 
I ran the Farbar Service Scanner that I saw from another post with the following log file:
 
Farbar Service Scanner Version: 13-07-2013
Ran by Jeff (administrator) on 13-07-2013 at 17:37:51
Running from "C:\Users\Jeff\Desktop"
Microsoft Windows 7 Home Premium  Service Pack 1 (X64)
Boot Mode: Normal
****************************************************************
Internet Services:
============
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.

Windows Firewall:
=============
MpsSvc Service is not running. Checking service configuration:
The start type of MpsSvc service is OK.
The ImagePath of MpsSvc service is OK.
The ServiceDll of MpsSvc service is OK.

Firewall Disabled Policy:
==================

System Restore:
============
System Restore Disabled Policy:
========================

Action Center:
============
Action Center Not... Read more

A:Unable to turn Windows firewall on

Hi jasallee,
 
It is not uncommon for remnants of malware to corrupt files. Can you tell us what the malware was and how you removed it. Also do you have a system repair disk or OEM cd/dvd?

5 more replies
Answer Match 52.5%

Hi all,

I'm using a Dell E7240, did a fresh install of Windows 10.
I can pick up all sorts of WIFI connections and connect to them successfully.

However when I wanted to use my internal 3G modem it tells me that the "radio is off" and I can't enable this in settings?
Its greyed out, if I enable flight mode is greys out the WIFI and Bluetooth switches.
When I disable flight mode it allows me to turn WIFI and Bluetooth off/on but "radio" remains greyed out.

Checked BIOS settings, checked driver for the Mobile Broadband Card, disabled and enable the adapter.
Still does not want to allow me to enable the radio. I can manage the SIM PIN so I can change it or turn on or off.

It even shows me the network provider if I disable the SIM PIN, but the radio remains off!

Any ideas?

Thanks
Carl

A:Windows 10 - unable turn on radio?

Hi there and Welcome to Ten Forums,

Have you checked any latest driver for your 3G modem? I'd also find out if there's any incompatibility issue.

3 more replies
Answer Match 52.5%

Windows Defender unable to turn On.
 
 
I recently had Avast antivirus installed, just for an additional scan. But removed it properly using Revo Uninstaller.
 
I ran Services.msc and found that Windows Defender is set to manual (but is unable to be set to automatic, location is greyed).
 
When I run Action Center, in order to Turn ON Windows Defender it simply opens Windows/System32.
 
 
Found the following while researching online,
 
Performing miscellaneous checks:
 * Windows Defender Disabled
   [HKLM\SOFTWARE\Microsoft\Windows Defender]
   "DisableAntiSpyware" = dword:00000001
 
Unable to set to '0', displays an error message..
  "Cannot edit DisableAntiSpyware"
 
 
Please help.
 

A:Windows Defender unable to turn ON

This post is from Farbar Service Scanner...
 
The files in question are the ones poses the problem. (MsMpEng.exe)
 
 
Farbar Service Scanner Version: 03-03-2013
Ran by David (administrator) on 01-05-2013 at 12:04:39
Running from "C:\Users\David\Desktop\Bleeping Computer"
Windows 8 Pro  (X64)
Boot Mode: Normal
****************************************************************
Internet Services:
============
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Attempt to access Yahoo IP returned error. Yahoo IP is offline
Attempt to access Yahoo.com returned error: Yahoo.com is offline

Windows Firewall:
=============
Firewall Disabled Policy:
==================

System Restore:
============
System Restore Disabled Policy:
========================

Action Center:
============
Windows Update:
============
Windows Autoupdate Disabled Policy:
============================

Windows Defender:
==============
WinDefend Service is not running. Checking service configuration:
The start type of WinDefend service is set to Demand. The default start type is Auto.
The ImagePath of WinDefend service is OK.

Windows Defender Disabled Policy:
==========================
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender]
"DisableAntiSpyware"=DWORD:1

Other Services:
==============

File Check:
========
C:\Windows\System32\nsisvc.dll => MD5 is legit
C:\Windows\System32\drivers\nsiproxy.sys => MD5 ... Read more

9 more replies
Answer Match 52.5%

While attempting to install Avira AntiVirus, it informed me that Windows Defender was running and that I should turn it off. I open Defender and attempt to click on Tools but there is no response and the Tools icon is grayed out. Googled and came up with no remedy to this problem so here I am.

Anyone have a suggestion how I can turn off this program and/or get the Tools icon to be active?

Thanks.

Problem OBE- Tools icon now works. Must have been magic!

A:Unable to Turn Off Windows Defender

Did you tryed with stoping the service of Windows Defender ?
Services - Start or Disable

1 more replies
Answer Match 52.5%

I got a virus several months ago. I had been trying to turn on my windows firewall or allow a program through windows firewall but it says "Due to an unidentified problem, Windows cannot display Windows firewall settings." It gave me more problems when i tried to update the settings and it says "Windows Firewall was unable to make the requested updates."

please help me
thanks

A:Unable to turn on windows firewalls

DownloadFarbar service scanner Checkmark all the boxesClick on "Scan".Please copy and paste the log to your reply.

9 more replies
Answer Match 52.5%

Last night when I turned on my Pavilion DV6 laptop it started with a major update. I left in and went to bed and when I turned it on this morning I was unable to turn on the wi-fi. I tried everything I could think of and nothing would work. I woould appreciate any help I could get. Thanks in advance   

More replies
Answer Match 51.66%

I installed Windows 7 on my PC.

I set in the Power Options to turn off my display after 5 minute of inactivity. Unfortunately the system does not turn off the display, even if screensaver starts regularly (I selected blank screensaver included in Win7).

I yesterday updated my GPU driver (for another different problem) and I have latest driver for ACPI and monitor.

Any idea on the reason why my Windows is not able to turn off the display?

Thanks in advance.

A:Windows 7 unable to turn off the display on idle

Easiest things first.
Try to reset it to never turn off and then hit apply.
A reboot may not hurt.
Then turn it back on and see if it helps.

9 more replies
Answer Match 51.66%

I am using windows xp, 2 days ago i found my comp unable to switch user in windows xp. When i press the swith user, nothing happens, like i didn't do anyting.
and today, my turn off and logoff doesn't work either.
How do i fix it?
 

A:unable to turn off,log off and switch user in windows xp

12 more replies
Answer Match 51.66%

Hello,
I have an issue, I cannot open/run firewall or defender. There was some kind of virus or something on my computer. I was able to get rid of it using the windows program Microsoft Tech helped me with, but now I am unable to turn on the firewall. I am getting
error code 0x8007042c. Also defender says it is on, but I can not update.
I have tried to recover to and earlier time, but it wont do that either
I also tried to run the registry editor, and again I get an error, it says windows cannot find 'regedit.

More replies
Answer Match 51.66%

Hi,

After installing Norton Security 2005 and following instructions under Windows Firewall will not shut off. I have SBC Yahoo as ISP.

Don't tell me to shut off Norton application (although I would like to)

Does anyone know how to prompt this application to obey the command OFF.

Caroline Moody

A:Unable To Turn Off Windows Fire Wall

Wellllll......you will find you end having more problems with NIS 2005 than it will be helpful.

Nevertheless, check out this link, which may help solve your dilemma.

http://support.microsoft.com/default...b;en-us;875356

4 more replies
Answer Match 51.66%

Hello, recently my computer showed a windows security alert in the right hand side of the task bar. It said that windows automatic update was turned off. I clicked onto the windows security center and it would not let me turn auto update on. A message will sometimes pop up that says something like: "Windows is unable to turn on automatic updates please go the the control panal, click on system and turn them on from there." This message does not appear every time. When I click control panel>Performance/Maintenance>system>auto update, I apply the change and hit OK but nothing happens after that. Automatic update remains off after trying what was suggested.

I have also been getting the same pop up about once every 5-10 minutes (sometimes more) that says "unable to connect to server" with the url:

"http://url.adtrgt.com/cpv.jsp?p=110219&ip=75.76.10.101&url=suggestqueries.google.com%2Fcomplete%2Fsearch%3Foutput%3Dfirefox%26client%3Dfirefox%26hl%3Den-US%26q%3Dbl&selectedKeyword=ron&selectedListingId=7293783&default=http%3A%2F%2Fsagipsul.com%2Fgo%2Frfe.php%3Fcmp%3Dvm_mg_fails_juan%26uid%3D2179AF5CD9EB11DD92F7168440CFFFFF%26guid%3D0E5A50D18BE0414F9CC590F7174E1638%26lid%3D%26url%3Dsuggestqueries.google.com%252Fcomplete%252Fsearch%253Foutput%253Dfirefox%2526client%253Dfirefox%2526hl%253Den-US%2526q%253Dbl%26affid%3D168440%26b42%3D0.0026&aid=889"

These occur when I am using firefox. I have not tested other browser... Read more

A:Unable to turn on Windows Auto Update

Please download MalwareBytes Anti-Malware to your desktop.Ensure that your computer is connected to the internet and your software firewall is disabled until instructed to re-enable it.Double click on the mbam-setup.exe to begin the installation process.When the installation begins, please do not change any of the settings and follow the prompts.Please make sure that when you finish the installation, these options remain checked; *Update MalwareBytes' Anti-Malware *Launch MalwareBytes' Anti-MalwareYou may now click finish...When MBAM launches, you will be prompted to update before running a scan. If an update is found, MBAM will automatically download and apply the updates and you can then click 'OK' button to close the box and continue. You may now re-enable your firewallPlease ensure that while you are on the scanner tab the 'Perform Quick Scan' option is selected, then click the 'Scan' button.If you are asked which drives to scan, please leave all of them ticked, and click 'Start Scan'.The scan will now begin and you will see ?Scan in progress? at the top; It may take a while to complete so please be patient.When the scan completes, you will see ?The scan completed successfully. Click 'Show Results' to display all objects found?Click the 'OK' button to close the box and continue with the removal process.Back on the main scanner screen, click 'Show Results' to see a list of any found Malware.Ensure that all it... Read more

1 more replies
Answer Match 51.66%

my laptop is windows 7 home premium 64bits
I tried to fix the computer by reinstall the whole windows,it failed,
at first when i got into the step after the login interface,
i got an error i forgot, something do with (sorry, i need to check,it will start from here in the reply)
now I cannot even start at safe mode
and my laptop just tried to repair startup(when did it ever work)
and it got some details

startup repair cannot repair this computer automaticly
sending more information can help microsoft create solution.
problem signature:
problem event name: start up repair offline
problem signature 01: 6.1.7600.16385
problem signature 02: 6.1.7600.16385
problem signature 03: unknown
problemsignature(it will be typed as PS)04: -1
PS 05: Autofailover
PS 06: 2
PS 07: CorruptRegistry
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

and here is the repair diagnostic and repair details
Startup Repair diagnosis and repair log
-------------------------------------
Number of repair attemps :2
Session details
-------------------
System Disk = \Device\Harddisk0
windows directory =D:\Windows
AutoChk Run = 0
Num. of root cause =1
Test performed:
-------------
Name :System disk test
Result : Completed successfully. Error code = 0x0
time taken = 16 ms
-----------*-
Test performed:
----
name :system disk test
result completed successfully error code=0x0

so then I just roled to the end of the diagnose,bcs I am typing a long crap
root c... Read more

A:windows 7crash, cannot start windows explorer,unable to turn on

something do with the 0xc0000006,
it said it cannot start the windows explorer, i remember i could open the task manager but nothing is on the desktop,just a plain desktop
now i cannot even start the safe mode

6 more replies
Answer Match 51.24%

I am unable to update the Kernel-mode driver framework ver 1.11 for windows 7 for x64-based systems (KB2685811). I get error: 80073712

Also, I am getting BSOD/stop errors in normal mode that say anything from:

-memory_management 0x0000000001a,

- "A device driver attempting to corrupt the system has been caught. The faulty driver currently being on the kernel stack must be replaced with a working version." GDRO.sys-
address fffff88000626a8f9, base at fffff88006269000, datestamp 49b9d125

I'm not sure if they are related.

When I run in safemode I do not get the BSOD. When in normal mode I will get BSOD consistently when running Norton Full System Scan, specifically when the full system scan gets to the Windows/system32 folder.

System specs:
Processor: Intel 2500K Core Duo Unleashed
MOBO: Gigabyte GA-p67A-UD3P
RAM: I have 4x4 Corsair Vengeance, only using 1 stick of 4GB corsair vengeance currently due to troubleshooting.
GPU: NVIDIA EVGA GTX570HD
HDDs:Intel 180GB SSD and Western Digital Caviar Black 1.0 TB (empty)
PSU: corsair 750 watt
Soundcard: MOBO

When I canoo

A:Unable to install Windows Update: Update Kernel-mode driver framework

I, again, apologize for double posting. I figure I should include the host of other issues I'm having. Maybe they can all be inter related.

-my DVD/RW drive, when connected to mother board in ANY SATA slot, causes the BIOS screen to freeze forever. I have disconnected the drive at this time while trouble shooting. I have tried known-good SATA cables so I know it's either the DVD/RW drive or perhaps a driver or mobo failure.

-I have run the memory diagnostic tool in windows. No issues were reported.

-I have NOT run memtest86 because I do not have a disk drive connected.

-I have had stop-errors (BSODS) such as PFN_list_corrupt, System_service_Exception, Memory_management, IRQ_not_less_or_Equal
All of these could be a result of bad RAM.

I have purchased new RAM as a means to fix my problems. It seemed to work for 2 weeks, then the stop errors returned.

9 more replies
Answer Match 51.24%

Hi,

I am unable to turn on windows security centre service and the firewall on my McAfee keeps switching off. I have Malware Anti-malware (PRO) but a virus still got through. I ran a scan on McAfee, Super Anti-Spyware and Malware and malware found the following trojan msimg32.dll (Trojan.FakeAlert.RRE) -> Quarantined and deleted successfully.Turned off the computer but still had the same problem with the secuity centre and McAfee Fire wall. The computer just switched off as well.

Can you please advise what I need to do to enable the Security Centre Service. I have clicked on services but there is no Secutity Centre showing, even after Malware deleting the trojan.

Thanks in anticipation for any assistance that you can provide.

Logs as follows

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 8:01:00 p.m., on 18/05/2013
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16483)
Boot mode: Normal

Running processes:
C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe
C:\Program Files (x86)\Dell\Stage Remote\StageRemote.exe
C:\Program Files (x86)\Google\Drive\googledrivesync.exe
C:\Program Files (x86)\Skype\Phone\Skype.exe
C:\Program Files (x86)\Dell\Stage Remote\StageRemoteService.exe
C:\Program Files (x86)\Secunia\PSI\psi_tray.exe
C:\Program Files (x86)\Cyberlink\PowerDVD9\PDVD9Serv.exe
C:\Program Files (x86)\Cyberlink\Shared files\brs.exe
C:\Program Files (x86)\Roxio\OEM\Roxio Burn\RoxioBurnLauncher.exe
C:\Program File... Read more

A:Unable to turn on Windows Security Centre Service

16 more replies
Answer Match 51.24%

Hello

I recently had problems with folder view settings that keep resetting to some other setting and the desktop auto-arranging the icons on its own. The culprit is likely Trojan.Zaccess, which was removed by Malwarebytes. I've also made the necessary registry changes or deletions as indicated by what I found online about making the folder view settings remember my customized configurations. The following registry directories were involved in correcting the situation:

HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\BagMRU
HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\Bags
HKEY_CURRENT_USER\Software\Microsoft\Windows\ShellNoRoam\BagMRU
HKEY_CURRENT_USER\Software\Microsoft\Windows\ShellNoRoam\Bags

The first time happened around Jul 8 and then again today Jul 22. The first time around I was successful in keeping the folder setting intact. The second time around, I needed to do a restore point from Jul 20. However after reboot, McAfee's real time scanning is turned off and keeps switching off after manually turning it on. The Windows Security Alerts is also indicating that my anti-virus software is turned off.

I was told that there may be lingering problems that Malwarebytes was not able to remove. McAfee full scan also didn't find anything else. I have the following DDS log below and attached the attach.txt log from DDS as well as the ark.txt from GMER. He... Read more

A:Windows XP 32: Unable to Turn On Real Time Antivirus

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything. We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/462019 <<< CLICK THIS LINK If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.*************************************************** If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lo... Read more

19 more replies
Answer Match 51.24%

I just got a message from the GWX Control Panel app that my upgrade options had changed.
I opened it up and tried to click on "Click to Prevent Windows Upgrades" and it tries but does not succeed. This has never happened before.
Has Microsoft implemented some new strategy to foil this app?

More replies
Answer Match 51.24%

Hi,
I have a Windows 7 enterprise edition service pack 1

i am unable to turn on my windows firewall, i go to Start Menu > Control Panel > Windows Firewall, then i click on Use Recommended Settings button, and the below error message apprears once i do that
"Windows Firewall can't change some of your settings. Error Code 0x8007042c
After that, i went to Services.msc scrolled down to Windows Firewall item and i tried to start it as this service is not started, once i try to right click > Start, i get the below error message
"Windows could not start the windows firewall service on local computer
Error 1068: The dependency service or group failed to start"

No one is able to resolve this issue as it needs deep technical understanding of the firewall dependecy and all else, i am an Administrator on this machine.

I prefer to have the replies come from people who really understand the steps that can be takent o analyze and trouble shoot this issue.

All replies are appreciated. Thanks in advance
 

A:Unable to turn-on Windows Firewall - Win 7 Enterprise Edition

Please download FarbarServiceScanner and run it on the computer with the issue.
Make sure the following options are checked:
Internet Services
Windows Firewall
System Restore
Security Center/Action Center
Windows Update

Press "Scan".
It will create a log (FSS.txt) in the same directory the tool is run.
Please copy and paste the log to your reply.
 

2 more replies
Answer Match 51.24%

I just installed the above, but am unable to turn the firewall on. When I go to "turn on" I am prompted that I am unable to turn the firewall on. Any help is appreciated!

A:unable to turn on Microsoft Windows essential firewall

Can you provide a link from where you got this software?

1 more replies
Answer Match 51.24%

Hi all Following a recent hard drive failure, I did a clean install of Windows 10 Enterprise (the ideapad originally came with a Windows 7 OEM licence). The wifi device, 'Qualcomm Atheros AR9285 Wireless Network Adapter' is present in the device manager and is reported as working. In the 'Network & Internet' settings dialog, if I turn wifi on, it is immediately turned off again. fn-F5 does nothing (the Lenovo Wireless Settings dialog is not displayed).  Perhaps I need to (re-)install this somehow? The WLAN Auto Config service is running (automatic). Cisco AnyConnect is not installed; I am actually trying to install it over wifi by connecting to my company's VPN server (which is not accessible using a wired connection) so that I can Activate Windows 10. Any ideas on how I can turn wifi on? TIA :-)

A:Z380 Ideapad: Unable to turn wifi on after Windows...

fn-F6 has stopped working now too :-( so I cannot turn off the touchpad which is pretty annoying when your job requires a lot of typing. I have no idea why. I tried uninstalling the wifi adapter driver and installing the one from Lenovo's website, but I still cannot turn wifi on and fn-F5 still does not bring up the Wifi Settings dialog. Perhaps my laptop model just isn't supported under Windows 10?

1 more replies
Answer Match 51.24%

I would like to post a link to answers.microsoft, regarding an on going issue of not being able to install Microsoft security essentials.

It has been suggested by one of people helping me to place it here on Bleeping...

So hopfully, someone may take a peck at it.

Here is the link

http://answers.microsoft.com/en-us/protect/forum/mse-protect_start/winxp-unable-to-install-msefeature-you-are-trying/0023525b-0256-4894-8da0-0b165f87b47d

Thank you

A:unable to install MSE;('feature you are trying to use is on a network')

In your first post (on Page One) you told us that a "virus" had removed MSE. When (exact date, preferably) did this happen and how have you determined that the computer is no longer infected?I think this was the last post from Pa Bear, usually very good -http://go.microsoft.com/?linkid=9748340. << Have you first run this Uninstaller for MSE to start with a clean slate ??Next run this program to see if there is any Antivirus installed -Download Security Check by Screen317 from HERE or HERE, and save it to your Desktop.* Double-click SecurityCheck.exe* Follow the onscreen instructions inside of the black box.* A Notepad document should open automatically called checkup.txt; please post the contents of that document.Note: If a security program requests permission to access the Internet, allow it to do so.Thank You -

1 more replies
Answer Match 50.82%

Hi guys, I'm a bit desperate here right now.

I have the same problem that this guy over here. I'm running Windows 10 Home x64, version 1607, build 14393.0.

I had to restore the PC to a previous point because I ****ed up some drivers. Then my AV (Bitdefender Free) started having some issues (they gui didn't display correctly) so I decided to uninstall it and just go with Windows Defender.

The problem is I can't get it to work... I get a notification in the Action Center saying to turn on the virus protection, when I click it, Windows Defender goes green(PC status: protected, Real time protection: on) for a second and then goes yellow again (PC status: Windows Defender is OFF, Real time protection: Handled by another AV program) and I get the notification again. If instead of clicking the notification I click "Turn on" on the Windows Defender gui, Windows opens another window, "Apps & Features" in settings, like asking me to uninstall the other, nonexistent AV.

Now, I've tried a lot of things...
Of course, I have completely uninstalled Bitdefender. I used the official tool provided by them for this. There is nothing in the registry by bitdefender nor any file or folder by that name in my PC.

I have tried every step listed here.

I have tried to install another AV (Avast) and the uninstall it to see if this would "reset" somehow windows defender. (Nope.)

I have tried option #2 here Windows Defender - Turn On or Off in Windows 10 - Wind... Read more

More replies
Answer Match 50.82%

Hello, recently i noticed that out of nowhere, my internet was going very slow; loading pages at a very slow pace, and basically 'choosing' when it wanted to load the pages or not. Just some really strange behavior. I ran a full scan and boot time scan about a month or two ago, and it detected an incredible amount of infected files, in the range of about 1,000 - 10,000. Many of them were some type of google update files, folders with crazy amounts of letters and numbers in their name between curly braces '{ 8sdfkjsdf8...etc,etc}'.
 
After quarantining and delting these, the internet problems seemed to dissapear. But ofcourse they come back. A few days ago i ran a boot time scan and it detected about 3,000 viruses. Again, these were mostly those strange google update files/folders. Here is the DDS.txt:
 
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 10.0.9200.16660  BrowserJavaVersion: 10.5.0
Run by David at 11:27:40 on 2013-10-20
Microsoft Windows 7 Ultimate   6.1.7601.1.1252.1.1033.18.2038.947 [GMT -4:00]
.
AV: avast! Antivirus *Enabled/Updated* {C37D8F93-0602-E43C-40AA-47DAD597F308}
SP: avast! Antivirus *Enabled/Updated* {781C6E77-2038-EBB2-7A1A-7CA8AE10B9B5}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe... Read more

A:Strange files, errors, unable to turn on windows firewall

Hello Dankaru, and welcome to Bleeping Computer!
My name is bloopie and I'll be helping you with your problems as best I can! A few things to keep in mind while we are working together:
If you have since resolved the original problem you were having, I would appreciate it if you let me know.
If you are unsure about any of the steps just post what you can and I will guide you!
Please tell me if you have your original Windows CD/DVD available.
Please copy and paste all logs here unless otherwise instructed!
Upon completing the steps below I will review your topic an do my best to resolve your issues.
Please do not run any other tools without my instruction to do so!
==========
Now, I must warn you...the reason these detections keep coming back is because your machine is infected with the ZeroAccess rootkit:One or more of the identified infections is a backdoor trojan.
This allows hackers to remotely control your computer, steal critical system information and download and execute files.
I would counsel you to disconnect this PC from the Internet immediately. If you do any banking or other financial transactions on the PC or if it should contain any other sensitive information, please get to a known clean computer and change all passwords where applicable, and it would be wise to contact those same financial institutions to apprise them of your situation.
Though the trojan has been identified and can be killed, because of it's backdoor functionality, your PC is very likely comp... Read more

10 more replies
Answer Match 50.82%

I'm unable to turn on Windows Defender real-time protection. It says "Handled by another AV program". But I have no AV program installed. Earlier I had bit-defender AV but I uninstalled it (Even I used bit-defender uninstaller tool). Still it shows the error. Please suggest me a solution. Is there any kind of tool which detects the AV or removes any left over AV files?
I'm currently on Windows 10 (version 1607) build 14372
Attaching the screenshot of windows defender.
Thank you

A:Unable to turn on Windows Defender real time protection

Did you uninstall Bit Defender using their uninstall tool? Chances are there are fragments of the program left over which may be causing this problem. You can find the Bit Defender uninstall tool here, run it & hopefully this weeds out any leftovers.






To be sure everything is removed properly, we also recommend using our dedicated uninstall tool. Download it from this location and then run it on your system:
http://www.bitdefender.com/files/KnowledgeBase/file/The_New_Bitdefender_UninstallTool.exe

1 more replies
Answer Match 50.4%

Hi,
I have a Windows 7 enterprise edition service pack 1

i am unable to turn on my [COLOR=blue !important][COLOR=blue !important]windows [COLOR=blue !important]firewall[/COLOR][/COLOR][/COLOR], i go to Start Menu > Control Panel > Windows Firewall, then i click on Use Recommended Settings button, and the below error message apprears once i do that
"Windows [COLOR=blue !important][COLOR=blue !important]Firewall[/COLOR][/COLOR] can't change some of your settings. Error Code 0x8007042c
After that, i went to Services.msc scrolled down to Windows Firewall item and i tried to start it as this service is not started, once i try to right click > Start, i get the below error message
"Windows could not start the windows firewall service on local computer
Error 1068: The dependency service or group failed to start"

No one is able to resolve this issue as it needs deep technical understanding of the firewall dependecy and all else, i am an Administrator on this machine.

I prefer to have the replies come from people who really understand the steps that can be takent o analyze and trouble shoot this issue.

All replied are appreciated. Thanks in advance
 

A:windows firewall - unable to turn on - windows 7 SP1

Please do not start more than one thread for each issue.

Closing duplicate.
 

1 more replies
Answer Match 49.98%

This is my 1st post in bleeping computers. This is the second time I am facing this issue. My windows security center wont turn on. I followed few Microsoft articles and tried registry fix, still no fix!!! I contacted my computer manufacturer tech support and complete OS reinstallation was done. This is the second time I had to do a factory reset on my computer. I still don't have an answer why this happened and what caused this issue. I suspected virus and ran trojan remover, malwarebytes, super anti, hitmanpro and my antivirus program McAfee. No virus found. But still my security center was disabled. I finally gave up and contacted my computer's tech support and they informed most of my computer's windows files were corrupt and they could not start windows services like windows firewall were not working and suggested me factory reset. I want to know what caused this issue and what should I do to avoid this issue in future. Is there a software or scan that can fix this issue without having to do OSRI? Could I have tried something before doing factory reset?

A:Windows security center wont start. unable to turn on firewall

Hello Vinay and Welcome -Do you have any idea of the actual "infection name" or did the people you contacted give you any further information ?Can I ask who were the people that you contacted (sales or makers), and basically what they did for you.Are you able to operate the computer and connect to the internet now ?? Can we gather a bit of information please -  FIRST : Please download MiniToolBox, Save it to your desktop and run it.Close any Firefox browsers you may have open while you Reset Firefox SettingsCheckmark the following boxes:•Flush DNS•Report IE Proxy Settings•Reset IE Proxy Settings•Report FF Proxy Settings•Reset FF Proxy Settings•List content of Hosts•List IP configuration•List last 10 Event Viewer log•List Installed Programs•List Users, Partitions and Memory size.•List Minidump Files Click Go and copy / paste the result (Result.txt).  NEXT : Download Security Check by Screen317 from HERE* Save it to your Desktop.* Double-click SecurityCheck.exe* Follow the onscreen instructions inside of the black box.* A Notepad document should open automatically called checkup.txt; please Copy / Paste the contents of that document.Note: If a security program requests permission to access the Internet, allow it to do so.  Thank You -

4 more replies
Answer Match 49.98%

I am unable to turn on windows security centre service and the firewall on my McAfee keeps switching off. I have Malware Anti-malware (PRO), Super AntiSpyware and McAfee. Operating System is Windows 7.
I ran a scan on McAfee, Super Anti-Spyware and Malware and malware found the following trojan msimg32.dll (Trojan.FakeAlert.RRE) -> Quarantined and deleted successfully. Turned off the computer but still had the same problem with the security centre and McAfee Fire wall. The computer just switched off as well.
Can you please advise what I need to do to enable the Security Centre Service. I have clicked on services but there is no Secutity Centre showing, even after Malware removed the trojan. Am I still infected?
Thanks in anticipation for any assistance that you can provide.
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 9.0.8112.16483  BrowserJavaVersion: 10.17.2
Run by Heathers at 20:48:50 on 2013-05-21
Microsoft Windows 7 Home Premium   6.1.7601.1.1252.64.1033.18.6127.4321 [GMT 12:00]
.
AV: McAfee Anti-Virus and Anti-Spyware *Enabled/Updated* {ADA629C7-7F48-5689-624A-3B76997E0892}
SP: McAfee Anti-Virus and Anti-Spyware *Enabled/Updated* {16C7C823-5972-5907-58FA-0004E2F9422F}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
FW: McAfee Firewall *Enabled* {959DA8E2-3527-57D1-4915-924367AD4FE9}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k D... Read more

A:Unable to turn on Windows Security centre service- Trojan msimg32.dll

Hello, Welcome to BleepingComputer.
I'm nasdaq and will be helping you.

If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps.
===

Search and delete the AdWare, PUP (Potentially Unwanted Program) installed on your computer.

Please download AdwCleaner by Xplode onto your Desktop.
Close all open programs and internet browsers.Double click on AdwCleaner.exe to run the tool.Click on Delete tab follow the prompts.A log file will automatically open after the scan has finished.Please post the content of that log file with your next answer.You can find the log file at C:\AdwCleaner[Rn].txt (n is a number).
===

--RogueKiller--
Download & SAVE to your Desktop RogueKiller for 32bit or Roguekiller for 64bit
Quit all programs that you may have started.Please disconnect any USB or external drives from the computer before you run this scan!For Vista or Windows 7, right-click and select "Run as Administrator to start"For Windows XP, double-click to start.Wait until Prescan has finished ...Then Click on "Scan" buttonWait until the Status box shows "Scan Finished"click on "delete"Wait until the Status box shows "Deleting Finished"Click on "Report" and copy/paste the content of the Notepad into your next reply.The log should be found in RKreport[1].txt on your DesktopExit/Close RogueKiller+
===

Please download ComboFix from any of the links below, and save it to your desktop. For information regarding thi... Read more

3 more replies
Answer Match 49.14%

Win XP Pro SP 2
768 Megs memory
AMD 1800 Cpu

I have been unable to install Dot net 1.1 or 2 on my system. I have downloaded it from Windows update and will download but will not install. Shows updates not installed. All other updates seem to work fine. I have uninstalled all old dot net items and ran a cleaner for dot net as well. Windows update now shows 0 megs to download and will go straight to installation and then fail. I have done what I could find on the net with a google seach and do not understand the MS site as to this problem. All other functions seem to run fine except those that require dot net.
Any help appreciated.

A:Unable To Install Dot Net Framework

The Microsoft Download Center has what you are looking for. Try downloading it to your computer and then installing it rather than going through Windows Update.

3 more replies
Answer Match 49.14%

I too have a problem with mine. I was trying to install a program on my laptop that was needing .net Framework 3.5 sp1, it allowed an auto update for it so I didn't have to download the program from Microsoft, but when I got to the point where it would installed, its said it failed because 2.0 wasn't installed. My laptop has .net framework 1.1 right now.

So I went to the main website (Microsoft) to download the program in full installation for 2.0, 3.0, and 3.5 with there serves packs for them. I got to the point to install 2.0, its said that I have it already, and so i went to 3.0, but it wont install because I need to get windows XP SP1 for it, but the thing that I don't understand is that I'm running Vista.

So I'm just lost here as well on trying to get my laptop with .net framework. if someone know what to do, I'll be very great full for your help.

A:Unable to install .NET Framework 3.5 SP1

Are all Windows Updates in including Vista SP1 & Vista SP2?

www.update.microsoft.com

Regards. . .

jcgriff2

.

1 more replies
Answer Match 49.14%

Hi, All!

My first post and with all due respect, I will make a more formal introduction to the Introduction forum.

I was in the process of installing .Net Framework 2.0, precursor before installing SyncToy 1.4, when I received the following error message:

Error 256015.Failed to install assembly 'C:\ . . . . /System.Web.dll' because of system error: The process cannot access the file because it is being used by another process.

I looked on the web for a solution and nothing I found matched my problem, tried what I knew and still unable to install. SyncToy is still waiting in the wings.

Any help, solution or better yet, suggestions to what to look for/look at, under the hood to fix myself, would be greatly appreciated.

Thanks in advance.

Yours truly,

vb_program_man
(Bob)
 

A:Unable To Install .Net Framework

Download Belarc advisor from www.belarc.com, then look at how many microsoft downloads, if any, are missing in its inventory. Sometimes one of the automated Microsoft downloads becomes corrupted... when then blocks everything thereafter.
Let microsoft scan you computer for Windows Updates, after a cold boot.
 

9 more replies
Answer Match 49.14%

I'm at a loss at this point. I could link you all the dozens of web pages I've pored through explaining what to do but that would take up too much space. I've been trying to install 3.5 online for a loooong while now and no method I've tried has worked.

The error codes I got were 0x800F081F or 0x800F0906 every time I tried to install it. I tried this method recently: How to fix 0x800F0906, 0x800F081F, 0x800F0907 error while installing .Net Framework 3.5 or higher version | UDHYAN TIMILSINA But, after I tried using that method, now it's stuck at "searching for required files". I don't get the error codes anymore, but it's literally been stuck at that for over an hour now, so I must have done SOMEthing wrong.

I tried using the DISM command prompts, didn't work. I tried to find and uninstall the KB296xxx updates, but I don't even HAVE those updates to begin with. I've pretty much scoured through Google for the past 2 hours or so but, no dice.

Anyone here able to help me? I had to register here and ask since I didn't know what else to do. But please keep in mind that I'm not by any means experienced with software jargon, so I'd appreciate it if you could explain the solutions to me in a noob-friendly type way. Thank you.

A:Unable to install .NET Framework 3.5

Can you show the log of the DISM?
Located at C:\Windows\Logs\DISM.

Also, what error does DISM give you exactly?

11 more replies
Answer Match 49.14%

Hello All

I'm upgrading an Elitebook 850 G3 from the stock mechanical HD to a Corsair SSD, all drivers are installed and everything appears to be going well.

I'm trying to install .NET Framework v4 for Win7 Pro 64-Bit, downloaded directly from Microsoft, and it has been stuck on "Installing .NET Framework 4 Client Profile" for at least an hour.

Does anyone have any ideas?

Thanks
Paul

A:Unable to install .NET Framework v4?

There have been some problems lately with installing .NET framework. Just leave it be for a while (like overnight) and see if it finishes installing. If not, post the install error log.

5 more replies
Answer Match 49.14%

Hello

Unable to install .Net Framework 3.5 on my pc . When i tried it downloaded setup in a mitue or 2 & while installing giving Setup Error . Then i downloaded Offline version for the same & tried But getting only attached pic window once & nothing else happening .

Kindly guide me & help me in installing it successfully .

Regrds

A:Unable to install .Net Framework 3.5 on my pc

cellclinic, welcome to seven forums. Can you post a screenshot with the error code you get

6 more replies
Answer Match 49.14%

I get an error message when my windows auto updates my .net framework.
I unable to unistall the .net frame work.I badly needs .net frame work now.
Can anyone help me install .net to latest version?
(Error message attached)
Many thanks,
Regards,

A:Unable to update my .net framework

It depence to which hotfixes do you have problem:
If it is problem with NET Framework 1.1 or 3.5 remove it by using Net Framework Cleanup Tool Aaron Stebner's WebLog : .NET Framework Cleanup Tool User's Guide (not through Programs and Features!) and reinstall it again.If it is problem with 2.0 ,3.0 and sometimes with 3.5 (if reinstalling it don't solve problem) then follow below:

Run cmd.exe with administrative previlliges (rigt click on cmd.exe as admin) and type:

sfc /scannow

next run Readiness Tool Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, for Windows 7, and for Windows Server 2008 R2

Pack all files from C:\Windows\Logs\CBS folder and attache to post

2 more replies
Answer Match 49.14%

I'm trying to install the redistributable .NET Framework 3.5, but halfway through the extraction of files I get the following error (see pic below):
Followed by this error:

Steps already taken:
Uninstalling .NET Framework 2.0 and re-installing it. Obviously didn't work.
 

More replies
Answer Match 49.14%

On the 30th Windows Update showed a "very important" update on both my laptop & desktop computers.. Both are running Vista Ultimate SP1.

Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86


The desktop originally had XP Professional and was upgraded when Vista first came out & SP1 was installed via Windows Update when it was released.. The laptop had Home Premium, upgraded to SP1 via Windows Update and then upgraded to Ultimate via Windows Anytime Upgrade disc.


Installed just fine on the laptop, but would not install on the desktop.. got the following errors:

[01/30/09,16:02:03] Microsoft .NET Framework 2.0SP1 (CBS): [2] Error: Installation failed for component Microsoft .NET Framework 2.0SP1 (CBS). MSI returned error code -2146762496
[01/30/09,16:02:27] WapUI: [2] DepCheck indicates Microsoft .NET Framework 2.0SP1 (CBS) is not installed.

Went to the Microsoft download site and tried to install .NET Framework 2.0 SP1 manually.. errored out as "already part of the operating system"... Checked Microsoft again and apparently Vista comes with .NET Framework 3.0 installed and this includes all lower releases.. So, tried to re-install 3.0.. Error saying .NET Framework installation or changes have to be done from the Enable/Disable Windows Features accessed from the Control Panel under Programs and Features... Sounded ok.. Click on "Features" and get pop-up b... Read more

A:Unable to install .NET Framework 3.5 SP1

I have the same problem and I am running Vista, I have not been able to find a solution. If anyone knows please help.

1 more replies
Answer Match 49.14%

this is a continuation of a problem that won't quit.
my computer is a compaq presario with 256 ram and xp sp2.
to make a long story short, i need .NET framework 2.0 or higher to run diagnostics. i was told by a member to look in my control panel, i did. the highest i have is 1.1. i was told to get microsoft updates and reboot. i chose the recommended updates and everything went as expected. there has been no change after several attempts. isn't the update supposed to automatically advance my .NET framework?
is there a special procedure involved? now i am also concerned about getting service pack 3 because of reported issues. i have heard that i should have .NET framework 3.5. i don't even know what this is, much less how to get what i should have. any help would be appreciated.

A:unable to obtain .NET framework 2.0

google "download .net 2.0 framework redistributable

3 more replies
Answer Match 48.72%

Update/edit
I am trying uninstalling and reinstalling .net framework 4 client, but am getting an error
I also recieve this error, when trying to "repair" the .net framework 4 install
(I can uninstall and reinstall .net 4 extended freely it seems, although it doesnt fix my .net 4 problems)

The windows installer service could not be accessed

In response to this error, all I could do was make sure the installer wasnt running when I started the .net framework uninstalled
And it wasnt, tried watching services, from mmc, and even using net stop

I also tried
MSIEXEC /Unregister
MSIEXEc /Regserver
twice, once With restarting and once without restarting

Ultimately whether I can fix the current install, or succed in unintalling .net framework and reinstalling it, in hopes of fixing my problems, either one would be fine....for error message related to why im trying to uninstall and reinstall .net framework, scroll futher down past the Code section

I attached my failed .net framework verifier txt files, along with the txt files relating to my .net framework client uninstall problem.
.net framework verifiier fails .net 4 client and full, even with both of them installed.

I've attached the code below, and files related to my installer error

Code:
OS Version = 6.1.7600, Platform 2
OS Description = Windows 7 - x64 Ultimate Edition
CommandLine = "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\SetupCache\Client\Setup.exe" /repair /x86 /x64 /parameterfolde... Read more

A:Unable to run applications that require .net framework 4

12 more replies
Answer Match 48.72%

When attempting to install the .Net Framework: I received the following message:
“Microsoft .Net Framework 2.0 has encountered a problem during setup. Setup did not complete correctly.”

Another dialogue box then indicated:
Patch packet could not be opened. Verify that the patch packet exists or that you can access it or contact the application vendor that this is a valid windows installer patch

I then attempted to run the Windows Update. Instead of installing, an error message indicated that some of the updates were not installed:
Microsoft .Net Framework 2.0 Service Pack 1 (KB110806)

Therefore, I am unable to install Microsoft business contacts, Microsoft accounting 2008 and more. Plz advise
 

A:unable to install Microsoft's .net framework

6 more replies
Answer Match 48.72%

Hi

I am running Windows XP Professional 32 bit service pack 3. I have also downloaded all the latest windows updates and security patches. Net Framework 3.5 sp1 is already installed. However, I am unable to install Net Framework 4.

I have attempted it repeatedly. When I down load the file, it appears in My Downloads as an unrecognised file type. When I double click on it, instead of 'running' or asking me to save the file so that it installs as an .exe file, my computer asks me what application to open it in, and so it is not installed.

I have installed a programme which requires Net Framework 4 in order to run. I have no idea why this programme is not installing. Can you help? Thanks.

Trisha

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz, x86 Family 6 Model 15 Stepping 2
Processor Count: 2
RAM: 2045 Mb
Graphics Card: NVIDIA Quadro NVS 440, 128 Mb
Hard Drives: C: Total - 152523 MB, Free - 87566 MB;
Motherboard: Dell Inc., 0DN075
Antivirus: Kaspersky Internet Security, Updated: Yes, On-Demand Scanner: Enabled
 

A:Solved: Unable to install Net Framework 4

6 more replies
Answer Match 48.72%

For several months, I have trying to install Microsoft.Net Framework 1.1 SP1 Security Update for Windows 2000 & XP (KB979906). How can I resolve this issue?

Thanks
Niecey12

A:Unable to install Microsoft.NET Framework 1.1

Do you need it ? If not, I'd just turn it off. Troubleshooting .NET is a mess. It's not like standard programs that you can simply Add/Remove.

If you need it, want to learn, or are very stubborn, try this:

http://support.microsoft.com/kb/320112

2 more replies
Answer Match 48.3%

I don't know what else to call it. On my old computer, I would go to Ebay and begin typing in the first letter of what I wanted to look at, and several words would appear that began with that letter (items I've looked at before), and then I could just click on the one I wanted. Now I have a new computer, and it doesn't do that anymore so I am constantly retyping in the words.

I'm thinking there must be a simple place you go to turn this feature on, but I have no idea where/how. Can someone help me, please? Thanks.
 

A:how do I turn on automatic "letter/word fill in" feature?

7 more replies
Answer Match 48.3%

I am having trouble installing .net framework 4. I had it before but when installing security updates it would fail, so I thought I would just uninstall and reinstall it again. But now I can no longer install it again. When ever I double click the setup.exe it does not run. It doesn't do anything.

Here is what I did before coming to this forum:
Virus scan: microsoft security essentials, ad-adware
SFC scan: no errors
checkdisk
register and unregister windows installer
use many microsoft fix it that includes repairing windows update, msi, etc

EDIT:
Thanks for the tips, but I just did a repair install and that was able to fix the problem.

A:Unable to install .net framework 4, setup.exe does not execute

* Have you a System Restore point created PRIOR to this problem that you can roll back to?

* Start > Control Panel > Search box > type troubleshooter > click Troubleshooting > System and Security> Fix problems with Windows Update.

* Try to install it again.

Read through the below instructions carefully before deciding to follow the directions.

* If that fails you might choose to run the .NET Frameworks Cleanup Tool
Just the .NET Frameworks 4.0 > reboot > try to install it again.

Note




Quote:
There are a couple of very important caveats that you should review before using this tool to remove any version of the .NET Framework from your system:

This tool is designed as a last resort for cases where install, uninstall, repair or patch installation did not succeed for unusual reasons. It is not a substitute for the standard uninstall procedure. You should try the steps listed in this blog post before using this cleanup tool.

This cleanup tool will delete shared files and registry keys used by other versions of the .NET Framework. If you run the cleanup tool, you will need to perform a repair/re-install for all other versions of the .NET Framework that are on your computer or they will not work correctly afterwards.


Links -

Try the steps listed in this blog post before using this cleanup tool.
http://blogs.msdn.com/b/astebner/arc...7/8108332.aspx
.NET Framework Cleanup Tool User's Guide - Aaron Stebn... Read more

1 more replies
Answer Match 48.3%

as i tried to install the .net framework 3.5, i got an error just after finishing installing the programme. The instalation would fail just after finalising the instalation. I looked up for some common issues and i found out that the error might be caused by the microsoft framework 3.5.1 being turned off and so i tried to swich it on and off but after running the installer 20 times without success and uninstalling the 4.5 version, i dont really know what to do next in order to get no 'error in setup' using framework 3.5.1 being swiched on and not having any other framework (4.0/4.5) on my computer

Any suggestions/clues that may cause this issue?

A:.NET framework 3.5 sp1 unable to install 'error in setup'

Have you tried uninstalling 3.5.1 and then installing 3.5?

Is there a compelling reason to use .NET 3.5? 4.0 and 4.5 are much newer and are compatible with the older versions. Unless a particularly badly coded piece of software is demanding .NET 3.5, I would just let Windows Update take care of getting 3.5 into your machine.

1 more replies
Answer Match 48.3%

Hi,

Recently i discovered a series of numbered folders on my C drive. I've concluded that they are from failed attempts at installing the updates for Microsoft .NET Framework 4. I've tried running the microsoft fixit program... i've also gone to the control panel and tried to repair the Microsoft .NET Framework 4 program but received the following "fatal error during installation" report, that it could not be fixed. How do i fix Microsoft .NET Framework 4? I'm not very computer savvy when it comes to this sort of technical stuff...i've read something about having to uninstall all versions of Microsoft .NET Framework which apparently is a tedious process that I'd like to avoid if at all possible. Also my computer won't let me delete the random numbered folders its creating on my hard drive even though I'm the only administrator on this computer and i actually have all my user controls turned off at the moment. thanks in advance....

--------------------------------------------------------------------------------------------------------------

OS Version = 6.0.6002, Platform 2, Service Pack 2
OS Description = Vista - x86 Home Premium Edition Service Pack 2
CommandLine = "C:\Windows\Microsoft.NET\Framework\v4.0.30319\SetupCache\Client\Setup.exe" /repair /x86 /parameterfolder Client
TimeZone = W. Europe Standard Time
Initial LCID = 1033
Using Simultaneous Download and Install mechanism
Operation: Repairing
Package Name ... Read more

A:unable to repair/update Microsoft .NET Framework 4

16 more replies
Answer Match 48.3%

A few weeks ago it was required for me to install a program which could would work if i had installed net framework 1.1.

At that time i had net framework 4.0, the program i required to install was nessesary for my school and i spent a lot of effort installing net framework 1.1, which was not an easy task. it wasn't possible installing it a normal way, and i ended up going in Comand Prompt as administrator and fixing 2 installations at the same time or something like that. Can not recall it very well.

The net framework 1.1 required updating and at the start of my computer booting it would generally ask me Accept of Decline the update possibility. This request has disappeared. I noticed when i would accept the update it infact wouldnt update anything and would not let me install anything cause it was apparently bizzy with updating.

This issue has now worsen over time, it does not ask me if i accept the update at all.

Now i cannot install or uninstall any programs, i have tried too install Java, and ableton. both failed, when i want too install something it says i do not have enough disk space. The same thing happens when i want too uninstall a program it says make sure u have enough disk space. i have 193 GB out of the 284 GB, i think i would have enough space for Java.

The netframework 1.1 clean up tool does not help me.

I hope i dont have too format my pc, and that the kind people of this forum can help me solve my computer issues.

With kind regards i ... Read more

A:Unable to INSTAL or UNINSTAL anything - Net framework 1.1 troublemaker

If your Windows Seven edition supports XP mode try using that to run .NET 1.1. Also I would contact the school and tell them using this obsolete software is endangering everyone's set up. Nobody still alive programs for .NET 1.1.

If you can't use XP Mode try Virtual Box. It's free. If you have trouble getting it to work try the Virtualization subforum here. It's getting the first one to work that can be difficult, like most things. I've gotten Virtual Box to work. But I've never tried XP Mode. I'm told that's the easiest. And XP is a lot closer to .NET 1.1 than Seven is.

Also whateverf software they are making you use I would search for an upgrade. The teacher may be just too lazy to look.

7 more replies
Answer Match 47.46%

I have trouble with installing .net framework 4.5.2 for my OS: Windows 7 home premium 64bit

each time I run the installer it states a fatal error has occured and the installation has been terminated, ofcourse that would get you to google the error code and try those solutions, to no avail.

Every solution the windows page around the subject did not work to improve anything and this issue is driving me insane.



I need the framework to run some programs I wanted to use for some video games I own.

this is what the installer gave me as log

OS Version = 6.1.7601, SP = 1.0, Platform 2, Service Pack 1
OS Description = Windows 7 - x64 Home Premium Edition Service Pack 1
MSI = 5.0.7601.18896
Windows version = amd64_windowsfoundation_31bf3856ad364e35_6.1.7601.17514_none_615fdfe2a739474c.manifest
Windows servicing = 6.1.7601.18766
CommandLine = C:\4fa5f86478dccd3274266ed1ab0292e8\\Setup.exe /x86 /x64 /web
TimeZone = West-Europa (zomertijd)
Initial LCID = 1043
Using Simultaneous Download and Install mechanism
Operation: Installing
Package Name = Microsoft .NET Framework 4.5.2 Setup
Package Version = 4.5.51209
User Experience Data Collection Policy: Disabled
Number of applicable items: 12
Exe (C:\4fa5f86478dccd3274266ed1ab0292e8\SetupUtility.exe) succeeded.
Exe Log File: dd_SetupUtility.txt
ServiceControl operation succeeded!
ServiceControl operation succeeded!
Exe (C:\4fa5f86478dccd3274266ed1ab0292e8\SetupUtility.exe) succeeded.
Exe Log File: dd_Setup... Read more

A:unable to install .Net framework 4.5.2 error code (0x80070643)

Hello and welcome Zeimaster there is a link from another tutorial you can try - Download Microsoft .NET Framework 4.5.2 (Offline Installer) for Windows Vista SP2, Windows 7 SP1, Windows 8, Windows 8.1, Windows Server 2008 SP2, Windows Server 2008 R2 SP1, Windows Server 2012 and Windows Server 2012 R2 from Official Microsoft Down if you haven't tried it already.

Some of us have to have this to read BSOD dumps and I have installed this on five machines without a hitch..

Let us know how you go

1 more replies
Answer Match 47.04%

hi, i am having an issue with updating the .Net Framework 4.5 from Windows Update. It gets an error code "Code 66A". So i decided to use the Setup file to repair or remove it from my computer and then reinstall again but then there are errors too. "fatel error during installation". ive installed SURT and also did the sfc scan but was still unable to update. The update file number is KB2833957. I've attached all the logs and files i think that can help.

A:Unable to Update/Repair/Remove .Net Framework 4.5 Error Code 66A

The CBS.log is incomplete - please reboot, and post a new copy

9 more replies
Answer Match 47.04%

Hi,

I've had great success with you folks in the past removing viruses and with increasing my system response time and I would like to ask for your assistance once again.

I was having trouble installing the new MS update KB922770 earlier this week.
I had this problem in the past and it was resolved by deleting the .NET Framework 2.0, reinstalling it then installing the update.

Now when I try to reinstall the .NET Framework 2.0 I get the message:
C:\Documents and Settings\Beau McCrury\Desktop\.Netfx.exe is not a valid WIN32 application.

I don't know what this error message means and consequently I'm not sure what to do next. Would you please advise me on how I should proceed?

Sincerely,
Beau McCrury

A:Unable To Reinstall Microsoft .NET Framework Version 2.0 And Update KB922770

Hi beaumac

Quick Fix Try:
1) Make sure that Update KB922770 is not present, and if it is, uninstall it [Add-Remove Programs in Control Panel]
2) Try deleting whatever .NET 2.0 download you currently have, and use this link to download a fresh copy --- http://download.microsoft.com/downlo...a/dotnetfx.exe
3) If .NET 2.0 installs successfully, you can then reboot, and try another visit to Windows Update to see if the patch now installs OK.

The error you were receiving can sometimes be generated (humorously enough) when the 64-bit version of .NET is accidentally downloaded and it's installer run [the error message is konked a bit, because 32-bit Windows gets a bit dizzy when fed 64bit code].

See if that helps
. . . Gary

7 more replies
Answer Match 47.04%

after a virus removal i get this pop ups when i start my pc "explorer.exe. net framework unable to find a version of runtime to run this to application" usually like 6 or 7 sometimes more than that. also i get a text document open when i start up the pc,any help is really appreciated.

A:explorer.exe. net framework unable to find a version of runtime to run this applicat

Some or all of your .Net framework programs(s) was affected.

Do any appear in Add/Remove Programs?

If they do, uninstall through there.

If they don't, or do and won't uninstall, then use the .Net removal tool -> Automated cleanup tool to remove the .NET Framework 1.0, 1.1, 2.0, 3.0 and 3.5 - Aaron Stebner's WebLog - Site Home - MSDN Blogs

After that, reboot and use MS Update to get them installed again (you start with 1 and work your way up).

2 more replies
Answer Match 46.62%

I'm actually at my wit's end...

A recent Thunderbird update has created a new "Paragraph" feature when composing messages. That means that each time the enter key is pressed, the cursor advances two lines instead of one, UNLESS you click a button and set the editor to "Body Text". If you do that it only advances one line at a time.

Is there any way to turn off this "Paragraph" feature? I prefer to use "Body Text", but that means I have to click a button and select from a drop down every time I want to compost a message, and I always forget.

Any help would be appreciated.

A:How do I turn off a new "feature" in Thunderbird?

Have read here and see if you get any joy.
https://support.mozilla.org/en-US/questions/1118727

2 more replies
Answer Match 45.78%

Been using Windows 7 Pro for years. Never had this problem until I got this new laptop. Whenever I move a window, these "shadow windows" appear. I disabled "show windows contents while dragging," but this apparently is a different problem. See pic. Does anyone know how to get rid of these "shadow windows"?

A:Unable to turn off Windows 7 Pro "shadow panes"

Try unchecking Show shadow under windows and see.

Jerry

8 more replies
Answer Match 44.52%

Hello,
When I try to login to Facebook I get this error message:
"Sorry, this feature isn't available right now
An error occurred while processing this request. Please try again later."

I am on a:
HP Pavilion g6 PC, 64-bit OpSys, Windows 7 Home.

This started yesterday morning. Here's what I've done so far:
- cleared history/cache in Chrome and restarted the computer - still not able to login.
- uplugged router and reset - still not able to login.
- logged in from my wifes computer and was able to get in.
- logged in from my iphone and was able to get in.
- logged in with I.E. and was able to get in the 1st time, tried again later and was not able to.
- uninstalled and reinstalled Chrome (and all associated files) and was not able to login.
- visited the Geek Squad at Best Buy and they didn't know.

I read an online forum and saw a couple responses:
- FB may be doing maintenance on servers or databases
- you account may be temporarily banned for some reason
but both of those don't seem to apply to me if I can get on with another computer and my iphone, unless those use a different IP address or something.

Any suggestions anyone?
Thanks.
PS I sent 2 messages to FB but they just send back the standard 'thanks for the feedback' message.
 

More replies
Answer Match 43.26%

Hi I tried twice today to download and install the following updates, Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86. it is a large update taking approx 30mins to download the 248MB package. Both times it got to the end of the download and the next I got was a message saying installation failed. At first I thought it was Comodo BoClean so turned it off the second time but got the same result anyway.
My PC is an AMD Athlon XP2400+, 1GB of RAM running on XP3 and updated via Automatic Updates "notify but do not install". I got a MSN email notification on IE8 RC1 and decided to check my Firewall connection to Microsoft Update, where I was told that the mentioned updates were available and decided to install them though not IE8 at this time.

For real time protection I use Comodo CIS, Comodo BoClean and SpywareBlaster. I switched off BoClean the second time and set CIS to installation mode both times. I cannot see anything else on my PC which could hinder the installation process. In my Add/Remove program list I have Microsoft .NET Framework versions 1.1,1.1 Hotfix, 2.0 Service Pack1, 3.0 Service Pack1, 3.5, Should I uninstall these before installing the latest version or should they all remain on my installed programs?. I would appreciate it if someone could offer some help here as I like to keep my PC up to date.

A:Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86

Hi .Well...let's start with the reason you have MS .NET installed on your system.What applications/drivers do you use which require any version?If you have no such applications...IMO it's not even necessary to install any version of MS .NET on a system. Doing so is a waste of time for those who don't have applications which demand MS .NET.http://forums.techarena.in/customize-xp/866859.htmLouis

8 more replies
Answer Match 43.26%

hello everyone,
 
  I am unable to turn off my mouse pad. I have gone to control panel/mouse and there is no option for and mouse pad. I have also downloaded some software from asus, that included the option to turn it off but alas i still have the problem
 
Help please!!
 
gcat

A:unable to turn off mousepad

Hi and welcome to Bleeping Computer.Which Windows operating system are you using?

2 more replies
Answer Match 43.26%

Im using Windows XP and recently ive been getting many pop-ups . Im also unable to turn on my firewall and my Symantec scan found viruses but was unable to get rid of them. BUt now symantec is not running properly and im unable to scan. i have no idea how to solve this problem.

Here's my HJT logfile:
Logfile of HijackThis v1.99.1
Scan saved at 11:45:46 AM, on 12/29/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16762)
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\hkcmd.exe
C:\Program Files\Java\j2re1.4.2_03\bin\jusched.exe
C:\Program Files\CyberLink\PowerDVD\DVDLauncher.exe
C:\PROGRA~1\SYMANT~1\SYMANT~1\vptray.exe
C:\Program Files\Adobe\Photoshop Album Starter Edition\3.0\Apps\apdproxy.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\Program Files\Google\Google Desktop Search\GoogleDesktop.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\UpsPilot\Winpower.exe
C:\Program Files\UpsPilot\jre\bin\javaw.exe
C:\WINDOWS\system32\syrmgr.exe
C:\Program Files\SpeedTouch\Dr SpeedTouch\drst.exe
C:\Program Files\Windows Live\Messenger\MsnMsgr.Exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\HP\Digital Imaging\bin\hpqtra08.exe
C:\Program Files... Read more

A:Unable to turn on firewall, many pop ups

im getting more pop up ads..and more messages saying "the webpage ur viewing is trying to close" and "someone would like to chat with u" can u plzzz help
 

2 more replies
Answer Match 43.26%

Before I start, forgive me because I am on my phone.
So my laptop notified me it was repairing a driver and in the middle of the process it changed screens and tried to restart. Now my computer will not turn fully on and goes to a blue screen. Says it cannot repair itself. I've tried system repair and using the command prompt for multiple things I read online. Nothing has worked and I am getting frustrated. I have not had this computer but a few months, but it does have my hard drive in it from a previous computer which is about 2 years old. I'm using the old hard drive because I wanted to save all my files and since this laptop does not have a CD drive I cannot backup my files unless on a flash drive.

So I am stuck. System repair does not work with or without the command prompt. With command prompt the error 0x80070003.

Says that CRITICAL_PROCESS_DIED.

Any help is gladly appreciated.

A:Unable to turn on computer

Hi, and welcome to TSF.

You said you tried system repair so you must obviously have the Windows 8 disc, that may come in handy.

Try this; How to run SFC /scannow from Command Prompt - Tech Support Forum

and/or; https://support.microsoft.com/en-us/kb/910336

5 more replies
Answer Match 43.26%

I'm running a Synaptics touchpad here. Ever since I got this comp, I've had tap-to-click disabled. But now for some reason it got re-enabled. Whenever I go into the tray icon for Synaptics, I click on it with both buttons (right and left) but it just sits there and does nothing. Whenever I try to do it from the control panel I click on Mouse but again it sits there and does nothing.

How am I supposed to disable it??!
 

A:Unable to turn off tap-to-click

Anyone? Someone! PLEASE!
 

1 more replies
Answer Match 43.26%

I have problem in WLAN...its was unable to turn on even i press f12(blink white color) and install all the neccessary drivers. I'm looking forward your help.

More replies
Answer Match 43.26%

I have a motherboard of configuration(intel 845) and 512 ram.....I am not able to turn on the PC...can anyone help me out!!!!!!!!!!
 

A:Solved: Unable to Turn on my Pc

10 more replies
Answer Match 43.26%

Thanks to you guys I was able to remove the trojan from my pc...and then I got to checking on some settings. For some reason my firewall is turned off and I can't turn it back on. The following message is in my security center:

The Security Center is currently unavailable because the "Security Center" service has not started or was stopped. Please close this window, restart the computer (or start the "Security Center" service), and then open the Security Center again.

If I click on the Firewall icon anyway the message at the top says: For your security, some settings are controlled by Group Policy.

I have no idea where to set those or why or how they got changed. From what I could find on Microsoft site (trying to read that is ridiculous) it says the following:

You install Windows XP SP2 on a client computer that is located in a Microsoft Windows Small Business Server (SBS) 2003-based network.
&#8226; You have joined a client computer that is running Windows XP SP2 to a Windows SBS 2003-based network

What does all this mean and how can I turn my firewall back on?
 

More replies
Answer Match 43.26%

Hey guys. I hope this thread is going in the correct section of the forums. I am experiencing problems with getting my hard disk drives to turn off when not in use. I have changed the settings in power options under the ''balanced'' preferred power plan and have set it to turn off after 90 minutes if the drives are idle. This doesn't seem to do anything, i have tried setting a different time limit, still no joy with that either. Anyone know what could be causing this? It did used to work perfectly before when my PC was new but now it has stopped working. No idea why. I am running Windows 7 Ultimate SP1 64bit. Any help with this issue is welcome. Thank you.

A:Unable to get HDD to turn off after specified time

Did you check the Task Manager for running programs? if possible, can you include in your next post all the running processes? Press CTRL + ALT + DELETE to access Task Manager.

9 more replies
Answer Match 43.26%

I know there are other posts on this subject but they don't help. I disabled Autorun with avg tools, but want it back on. It shows it is on but it will not start. Hope someone has an answer for me.

A:Unable to turn on Auto Run

Have you tried the tutorial on how to turn on or off auto run?

9 more replies
Answer Match 43.26%

My father's laptop crashed two weeks ago, I tried to troubleshoot it but nothing is working. The laptop is exactly two years old and runs on windows 10. The laptop will not turn on, but, on the rare occasion it does, it reports an error almost like a hard drive or motherboard error. The laptop has been only been used a handful of times within the last year and never operated serious programmes that would challenge the computers operating systems. I have a basic knowledge in laptops and to me, it appears to be a hard drive/ motherboard error which is preventing the laptop from operating. Unfortunately, my father never renewed the warranty so I'm enquiring if there are any services available within HP to repair the latop.   

A:HP pavillion unable to turn on

What OS the laptop came with originally?

1 more replies
Answer Match 43.26%

Hello, I am having the same issue discussed in this thread:(My tablet is not able to turn on at all - and there is no indication that it is charging when it's connected to a charger or computer.)https://forums.lenovo.com/t5/Android-Yoga-Series-Tablets/Lenovo-Yoga-Tablet-2-not-switching-on/td-p/... But NONE of the solutions posted in this thread has worked for me, so now I don't know what to do.All I can get out of the "soft-recovery" solution by holding down the power button for 64 seconds is a little flash around the power button that fades away instantly and nothing happens.  Thank you for reading and please help me ASAP.

More replies