Tech Problem Aggregator

Looking for System Utility

Q: Looking for System Utility

Recently migrated from XP Pro to Win 7 Home Prem. 64, I used CC w/enhancer, Auslogic products, Avast, Spybot and Fix it Utilities for keeping my system running smoothly. With Win 7 I have added Malwarebytes, I am not sure I want to purchase the new ver. of Fix it or look for another similar Utility, the old ver. of Fix it I used with XP worked great, never had any problems, but it is not compatible with Win. 7 -

Looking for some suggestions, I have check out Glary Utilities and System Mech., but still leaning toward Fix it - what do you guys think ?

Thanks

Joe

A: Looking for System Utility

When you finally decide what's best.. let me know too & i'll do the same

9 more replies
Answer Match 47.88%

I am using Win 98 2nd Edit. I have a Pentium 111 600 w 28 Gigs. Under the Config screen I see a yellow pencil, the box is unchecked and it reads Devic =C:\Windows\Himen.sys (yellow Pencil) rem C:\windows\emm386.exe REM Header. I notice when I start up on the black screen it says something about 386 Drivers not installed. Pls help. Thx
 

A:System Configuration Utility Config System

Can you list those lines out individually? It all ran together so I'm not sure what goes where.

Is it REM Header for instance?

Also, is the computer working ok, other than "saying something about 386 drivers"?
------------------
Get free stuff and help out a poor computer tech:
LarryCore begs for money
 

3 more replies
Answer Match 47.88%

What's the skinny on nothing showing up (blank window) for system.ini and windows.ini in the System Configuration Utility?

Thank you.
 

A:System Configuration Utility: No system.ini or windows.ini

7 more replies
Answer Match 46.2%

Hi i have installed new system fan in my dell dimension 8100, on boot warning says system fan not found, f2 for system fan utility. bios comes up can't find anything for FAN !! can anyone help me?
 

A:System fan utility

Did you plug it into the same motherboard connector the old fan was connected to?
 

3 more replies
Answer Match 45.36%

Does anyone know, where I can find a list of programs that run in the System Configuration Utility on the Services Tab???? I looked in that are and there were ....38 running. I want to know which ones I can uncheck and stop from running.

Thanks... Conbon

A:System Configuration Utility

http://www.blackviper.com/WinXP/servicecfg.htm

3 more replies
Answer Match 45.36%

I disabled some of the items in my Start Menu with the help of answersthatwork.com as a guide. After I was all finished with that, I clicked Apply then Close or Exit? Rebooted, then went back to see if what I had unchecked stayed unchecked and it didn't. I've done this twice and every time I uncheck unwanted items,apply and reboot it seems to reset itself and check everything again ? Does anyone know why this is happening?
Also, the answersthatwork. seems like a good program but being the tight wad that I am I was wondering if their was any programs like this for free?

Windows XP
 

A:System Configuration Utility

15 more replies
Answer Match 45.36%

Is there a way to gauge a PC system's gaming ability?

Since video cards and add-on programs (Direct X, etc) are so fundamental to game play, if would be nice to have a utility that would give a yes or no on the question "Will this game work on my computer?"

Bottom line is I don't know if my PC is 3D, GL rendering or what anymore since video card evolution is non-stop. A utility program to scan the computer's capability would help.

3 year old PC:
Pentium 3 533mz Katmai
383 mb RDRAM
32mb Nvidia geForce 4X AGP Graphics Card
 

A:System Diagnostic Utility

That's actually built into Directx.

Go to Start, Run type in dxdiag and hit enter.

If that doesn't work, then do a search on your system for dxdiag and open it when you find it.
 

2 more replies
Answer Match 45.36%

I have Windows XP and from time to time have used system configuration utility to clean up my start-up menu. Now all of the sudden I can't even get it to open. I also notice that I can not complete a System Restore. I am logged on as the Administrator. Any idea of what is wrong? Do I have a virus that is aimed at attacking these operations? Please help if you can...I have been trying to correct for hours!
 

A:Can't run System Confuguration Utility

do you have a virus scanner up today ? this sound to me like some kind of virus or spyware here run this program http://www.softpedia.com/progDownload/HijackThis-Download-5034.html

close all program before you run this and do a scan and post your log here
 

3 more replies
Answer Match 45.36%

When I boot up I get the following message after the desktop initializes:

""You have used the system configuration utility to make changes to the way windows starts.

The system configuration utility is currently in diagnostic or start up mode, causing this message to be displayed every time windows starts up.

Choose the normal start up mode on the general tab to start windows normally and undo the changes you made using the system configuration utility.""

I need to know how to get to the general tab to make the changes mentioned above. I have no idea where this utility or the general tab is. All help appreciated.
 

A:System configuration utility???

When that message appears, click the "don't show this message again" box.

Anytime you use MSCONFIG to UNselect startup apps, you get this (annoying) message.
 

1 more replies
Answer Match 45.36%

What is the HP System Event Utility and how do I use it? http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-133065-1&cc=uk&dlc=en&lc=en... 











Solved!
View Solution.

A:HP System Event Utility

Hi Cyclelegs, Thank you for your inquiry, I will do my best to assist you! The HP System Event Utility  enables special function keys on the system to be programmed. I believe it adds the extra features to the buttons. such as Wireless on and off. When I tried to install it on a lab computer here it just told me it was already installed.  When I put it in the search bar it just brings up the download. You are not able to access or use it to alter or change anything. I hope this has addressed your concerns.

9 more replies
Answer Match 45.36%

I have just done a repair of x\p things are just about right apart from a few item..

Can u help..

SYSTEM CONFIGURATION UTILITY Always pops up from booting pc up on desktop I have clicked the bx but it still wants to pop up saying I have change some items on start up....I press don`t show me this again but on stsrt up it still pops up....

Also slight delay from windows welcome screen to desk top about 30 secs configu msconfig to reduce ammmopunt in start up but still slow..
I also need to do some housekeeping

1....defrag
2....temp clean out
3.syp bot
4..ad ware
5.virus check

Any thing alse I should do thanks..
 

A:System Configuration Utility

16 more replies
Answer Match 45.36%

I have an annoying problem that involves the System Configuration Utility message coming up everytime I start up my computer. I have checked Msconfig and my startup programs are all checked and it says that it is in Normal Startup.

Any help would be appreciated,
Thank You.

Anyway here it the logfile

Logfile of HijackThis v1.99.1
Scan saved at 5:39:13 PM, on 9/01/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.5730.0011)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Eset\nod32kui.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Lavasoft\Ad-Aware SE Plus\Ad-Watch.exe
C:\Program Files\Comodo\Firewall\cpf.exe
C:\Program Files\Comodo\Firewall\cmdagent.exe
C:\Program Files\Eset\nod32krn.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\alg.exe
C:\WINDOWS\regedit.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Hijackthis\HijackThis.exe

O2 - BHO: Yahoo! Toolbar Helper - {02478D38-C3F9-4EFB-9B51-7695ECA05670} - C:\Program Files\Yahoo!\Companion... Read more

A:System Configuration Utility

13 more replies
Answer Match 45.36%

When I boot up in XP it is in selective startup and when I switch to normal startup I get all the programs I deleted in my start up system tray. This is like a seesaw, is there anyway I can select normal start up and delete the programs from my system tray at the same time, this is driving me crazy.
Another ? is when I was using ME there was a great password reminder program, does this exist in XP, If not is there any good programs other than Gator(YUCK), any suggestions much appreciated, thanks, Neesh
 

A:System Configuration Utility

http://www.zdnet.com/pcmag/pctech/content/18/08/ut1808.001.html
this is "startup cop" it will let you manage exactly what programs you have running at startup.
stay away from "gator" its spyware.
hope this helps.
good luck.
 

3 more replies
Answer Match 45.36%

I was infected by 6 false trojan alerts. I ran Malwarebytes and it caught them and removed them but on my System Configuration Utility- Startup, there are two items. One begins with ~tmph and the other one starts with "a" and I can't read the whole address. I unchecked both but how do I get rid of them and how can I see the whole address? They are both unframiliar to me.

A:System Configuration Utility

MSCONFIG.EXE is a troubleshooting tool - not a fixing tool.First, re-enable them in MSCONFIG, then use this free tool to locate them and disable/delete them: http://www.microsoft.com/technet/sysintern...s/Autoruns.mspxIf you have difficulties with this tool, post back and we'll see if we can get the address for another one from garmanma.

3 more replies
Answer Match 45.36%

Gudday all
I have made some start-up changes using msconfig.
Once I rebooted the machine the following message appears, see attachment.
I want to keep the changes but the message seems to imply that I cannot.
If I check the box will the changes be accepted? Will this message appear every time I start?

A:Using XP System Configuration Utility

The changes have already been made. This is just a warning. As the label on the checkbox says, if checked it will not appear on next startup.

2 more replies
Answer Match 45.36%

Where do I find the TSG utility?
Tried downloading from download.com, but, after selecting, to open executable program, I get message saying 'file can't be found.'
 

More replies
Answer Match 45.36%

Hi Everyone,

Can you tell me if everything is okay here? I ask myself how can the Office Source Engine show stopped when it is checked?

Anyway, I would like to know how I can get rid of the STI Simulator which is an old entry that was left behind when I removed the software of my old webcam! Do you have an idea how I might be able to do so?

Thank you

A:System Configuration utility

Go into the Services and enable it

I think I provided you with this information in another thread

Quote:




OSE.EXE is part of Microsoft Office software.
OSE.EXE is the system service called OFFICE SOURCE ENGINE.
OFFICE SOURCE ENGINE is required for reinstal, or install an "on demand" feature in Microsoft Office 2000/2003.
Required for using Microsoft Office.




STI Simulator is going to have to be removed via the Registry

6 more replies
Answer Match 45.36%

Need help with system configuration utility in windows xp.
For some reason when I try to uncheck some of the programs in the
Startup folder the whole program shuts off. Anyone else have a problem like that?
 

A:system configuration utility

Test in safe mode.
Please post result.
 

2 more replies
Answer Match 45.36%

In my Startup list there are a ton of listings. Only a few are checked however. What I was wondering is, is there any way to get the others out of the list? Removing programs and deleting files do not take them out. I know it doesn't hurt anything to have them there, they just bug me and I want them gone. Thank you for any help.

A:? about System Configuration Utility

Hello and Welcome to TSF

Clean-up the MSCONFIG startup tab listings

1 more replies
Answer Match 45.36%

I have XP, IE6, and M Office 2003.

I do run>MSconfig and msconfig comes up. I deselect several programs in the startup and services tabs and exit, so the window comes up saying I have to restart my computer for the changes to take effect. I click restart and the computer reboots. On my desktop comes a window about the System Configuration Utility and how some things have changed. A large section of the window is missing, so that the extreme bottom end of the window is a checkable box that says "Do not show this message again" which I select. However, this System Configuration Utility window pops up every time I boot up my computer. But when I put the computer back in normal mode, the window doesn't pop up on reboots. What's going on?
 

A:System Configuration Utility

6 more replies
Answer Match 45.36%

I'm anticipating putting a versatile machine together that will check and scan HDs, virus and malware removal and also serve as a remote access machine (remotely servicing other machines).

I will be using Win 7 pro as my OS. I will be using mutliple boot drives (i.e., one for scanning HDs and virus removal, a separate system HD for Remote Access usage).

I will need only to buy a cpu, mainboard and RAM. Reliability and function are priority, but so is budget. I have been Intel only for several years, but am not opposed to AMD if it meets all of my requirements.

The above said, I am hoping for recommendations for the cpu and mainboard.

Given that I will generally be using this machine for singular functions at any given time, I assume that Hyper-threading will not be important?

The parts I'm considering:

Gigabyte Intel H81 Motherboard

Intel Pentium G3220

or

Intel G3420

I have not used AMD for many years, so I'm not familiar with the possibilities and savings of today.

The above components would run me around $150. I don't want a "bare minimum" machine and am not opposed to spending more, but would like to spend as little as possible for what will easily meet my needs above. The one thing I don't want is slow scans and Remote Access lag (internet is 50/5mbps and should not be a bottleneck).

Thanks for any ideas.

A:Utility system on a budget

So in a nutshell you want a test machine that you can slip drives into or hook up to others etc etc?? I am only asking because you may be wanting to do something that I did and that is have a tester machine I can try out different programs and hardware etc on??

for that I just refurbished an older machine that I got for nothing it has a fairly decent CPU and even with DDR2 RAM but it does just about anything I ask of it.
You may be able to pick up one and do that with it.

But if you are like me and only have access to retail priced stuff then it is going to cost around $500 - out here at least I don't know where you are without going and looking and it does depend on the retail situation where you are and what quality you want to build into it.

7 more replies
Answer Match 45.36%

does anyone know if there is a way to hide or remove a program from the System configuration utility in the start-up box without shutting down the program. I want to keep a program running but don't want anyone to see what it is running. I have a keylogger running to keep an eye on what/who my kids are talking to, but there very smart and know how to shut it down from the System configuration start up. So please if anyone knows how i can accomplish this please help. Thank you.
 

A:System configuration utility help.

I believe you can't run this utility unless you are the ADMIN. Make USER accounts for the kids. They can't access MSCONFIG. But then, if they know the process name of the program, then Ctrl+Alt+Del may allow them to end it anyway. Might be a 3rd party software that can do what you want.
 

1 more replies
Answer Match 45.36%

What should i do?My pc is opening everything.When i go to startup every start up item is checked,What is main items i should have so i check them and disable everything what's unnecessary
Ty

A:Help me,System configuration utility

What should i do?My pc is opening everything.When i go to startup every start up item is checked,What is main items i should have so i check them and disable everything what's unnecessary
Ty

3 more replies
Answer Match 45.36%

There are many many services in system config. Where would one find out which ones are needed and which are not. Is there a way with out Googling every one of them.

A:System Configuration Utility

Try searching on this page : http://www.bleepingcomputer.com/startups/

6 more replies
Answer Match 45.36%

Hi All,
Not sure if I'm in the correct discussion but I made a disk image of my "C" drive using Windows 7 built-in utility onto another hard drive. My "C" drive is using 27.4GB of data but the Image size is only 12.9GB. Could I have done something wrong? I thought the image size would be at least as big as the used space on the "C" drive. I'm concerned that I didn't get all my programs,files and settings backed up correctly.

Any thoughts?

Thanks............Tom

P.S. I tried to do this last night using DVD's for backup but decided to abort after 9! Dvd's were burnt and it still was not completed.

A:Win 7 System Image Utility

Welcome,
I do not know if you did it right, but the image is compressed and should be smaller.

http://www.sevenforums.com/performan...t-include.html

I tried to put it on DVD, basically it does not work.

6 more replies
Answer Match 45.36%

Hi all,
after cleaning my puter of a virus (or 2!!), I noticed when I ran the system configuration utility to see which items were running at start up, some files were still present, particularly;

AVSERVE2 and SKYNETAVE.

Does anyone know how to remove "dead wood" from the system config util. start up???

Many thanks

Geoff

A:system configuration utility

You untick it under the startup section then apply and restart if that does not work dl HijackThis.exe and post you log under the HJT log forum page.

3 more replies
Answer Match 45.36%

I can't make changes to Startup. When I go on to System Configuration Utility and make changes, I get a messae: "Must sign on as an Aministrator. I am the owner and computer administrator. How do I correct this problem?

A:System Configuration Utility

Are you sure your account is the administrator? If you go into Control Panel and to User Accounts, does it show your account as admin?

2 more replies
Answer Match 45.36%

system configuration utility?

--------------------------------------------------------------------------------

thats helped me understnd so much more but ive opened msconfig and in my startup page theres so many things set to start up,i dont want to remove anything in case i cause damge how do i no what my computor needs to open?hope you can help
 

A:system configuration utility?

I'd run a Hijack This log and post it here...

But if you wanna know what some things are that you are unfamiliar with, you can look at this site:
http://www.answersthatwork.com/Tasklist_pages/tasklist.htm
 

3 more replies
Answer Match 45.36%

Hi all, I just re-formatted my Hard drive and Now that I have everything up again, i was trying to connect to the internet, however the system isn't recognizing my Ethernet card. I don't have the disk anymore as I haven't had to do a format in about 5 years. Windows won't even add their own drivers for some reason.

I was looking for a utility that can go through all my Hardware and maybe tell me what the name of the Ethernet card is so I can download the drivers from the internet to this computers floppy drive then upload onto my comp.

Thanks for the help!
 

A:System Check Utility

8 more replies
Answer Match 45.36%

When I go to "start" "run" and type in "msconfig" I get an error message that says the file can't be found. Any idea on where to find it?

 

A:System configuration utility

7 more replies
Answer Match 45.36%

Hi Guys,

I tried to install net framework 3 yesterday, but I cancelled during the installation because it took too long. Anyway, my computer is working fine, but I notice that something new appeared in the system configuration utility take a look at the picture. The name is NULL. I cannot tell however, whether this appreard after this action. What does it stand for? Can I remove it?

Your help is appreciated

A:[SOLVED] System Utility

Hi Acer2000...how are you?

it probably is related to the failed installation..try backing up the registry key then removing the entry. If something gets affected, you can always restore the key.

10 more replies
Answer Match 45.36%

I have a self-built computer. It's my second one, and I have rebuilt or modified this machine about 3-4 times. My current specs are this:

Windows XP Home
Giga-Byte GA7n400 Pro 2 (Rev. 1) Mother Board
AMD Athlon XP 3200+
2 GB of PC 3200 Dual-Channel Ram
Nvidia 6800 GT 256 MB AGP
36 GB Raptor 10k RPM SATA (OS and Main Support files)
74 GB Raptor 10k RPM SATA (Program Files)
Creative Sound Blaster Audigy 2 Platinum


What my question is-are there any programs out there to help tweak performance. I am more of a hardware junky than I am into OC'ing. Just have no interest, and MHO is I know just enough about OC'ing to do something stupid.

I am mostly looking for any utilities that will in some way increase performance, or make it easier to tweak performance. I have always been a do-it-yourselfer, and I just feel my system is not performing to my liking, performance-wise.

I browsed the downloads section-but that won't tell me necessarily what is good and whats not. Basically, what are some tweak programs and utilities that the people of this forum recommend?
 

A:System Utility Tweakers and Such

While I'm not into overclocking, here are some programs I have used for general system performance. X-Setup works quite well, it is shareware, but you can get a demo at the link I provided. If you want a free program, try TuneXP. It works very well also. Bear in mind that all these programs bear a certain amount of risk, be sure and back up your registry before you start, in case somthing goes wrong.

And if you are like me and are really feeling brave, you can do a lot of what these programs do manually. A good place to look for manual tweaks is at TweakHound's site. Again if you go this route, remember to back up first, you won't be sorry.
 

2 more replies
Answer Match 45.36%

After going to MSConfig, switching the BOOT.INI tab to Safe Mode and rebooting. I then ran Hijack, checked and fixed 04-Global Startup:Winlogon.exe. Then I went back to MSConfig, unchecked Safe Mode and attempted to reboot again. Now I get the following message:

System Configuration Utility
You have used the system config util. to make changes to the way windows starts. This system config util is currently in Diagnostic or Selective start up mode, causing this message to be displayed and the utility to run every time windows starts, choose the normal start up mode on the general tab to start windows normally and undo the changes you made using the system config util.

When other users try to log on they get the following:

System Configuration Utility
An access denied error was created while attempting to change a service. You may need to log on using an Administrator account to make the selected changes.

In the System Configuration Utility "General Tab" it ask to select either the original Boot.INI or the Modified Boot.INI

How do I get all this back to normal without undoing the changes I made to get rid of the trojan?
 

More replies
Answer Match 45.36%

I am trying to remove Norton Antivirus 2005 from Windows XP, but can not remove it from the Control Panel Add/Remove Programs option. The instructions I received from Norton recommends that I begin at Start, Run, enter "msconfig" and then proceed through the Systems Configuration Utility window by making sure that "ccApp" is checked. My problem is that I can't get the SCU window to stay open when I enter msconfig into the Run box. It only appears for a brief second.

Anybody have any suggestions?

Thanks!

A:System Configuration Utility

Hi clw and welcome to BC

The fact that msconfig won't stay open is a classic sympton of spyware. When that happens you can't usually access regedit.exe from Run or your Internet Options from the Tools menu in IE.

Suggest you post a log in the HiJack This forum on this site after folllowing the instructions about posting a HiJack log at the top of the forum.

1 more replies
Answer Match 45.36%

In XP Home I have some programs that open at bootup that I don't want anymore. I went into the System configuration utility program and clicked on the Startup tab. I unchecked quite a few of them and then rebooted and it worked, they don't appear at bootup anymore, but they are still in the Startup program in the system configuration utility program. I tried highlighting and then right clicking to click on delete but it gives no option to delete them. How can I get them out of the Starup folder?
Thanks, Jim
 

A:system configuration utility

This site has info on what is required during start up.

http://www.blackviper.com/WinXP/servicecfg.htm

Its OK to leave the unchecked one there.
 

2 more replies
Answer Match 45.36%

My sister was recently scammed and stupidly allowed remote access to her computer. At every start up now system configuration utility message opens saying it is currently in diagnostic or selective startup mode what should I do to fix this
 

More replies
Answer Match 45.36%

I have recently completed building my own pc and I tried to use a few systyem utility free software to check the performance etc, but none of them could tell me what I am looking for. I have used Aida32, Everest.

I am after the info on my RAM speed and the Front Bus Speed. Everest does give me FSB but it is not I think my MoBo can do.

Any one can suggest a good free software ?
 

A:System utility software

Try CPU-Z or SIW.
 

1 more replies
Answer Match 45.36%

I removed some of items from my Start up thru System Msconf. Since I did that everytime I start the computer I get a message "System Configuation Utility" it is telling me that I changed the start up and need to restart.

I have the Start up Set for Normal Startup, I tried changing it to selective start up but it still appear. Does anyone know what I need to do

thanks

A:System Configuration Utility

Msconfig is mainly used for testing purposes. To permenantly remove/disable startup entries, I recommend Autoruns:http://technet.microsoft.com/en-us/sysinte...s/bb963902.aspx

1 more replies
Answer Match 45.36%

Hello, In my "msconfig" box there is an entry under win.ini called
[MCI Extensions.BAK] Could someone tell me what this is for as I would like to delete it if no use. It has been disabled for as long as I can remember. Many thanks.
 

A:System Configuration Utility

MCI has to do with communications devices and I believe multi-media as well.

since is has the ".BAK" that would give the impression that it was backed up brolly due to some system changes.

Uncheck it, reboot the system and test your functionality. *IF* things still work, you should be able to safely remove it.
Good Luck!

ST
 

2 more replies
Answer Match 45.36%

I recently had to use system config. to find a problem. I checked normal startup and restarted my computer.Now when I start my computer I get the System Config. Utility Screen telling me I have to set it for normal setup. How do I resolve this problem. I'm using XP Pro.
 

A:System Configuration Utility

Should be a tick box to not display the screen. Tick it.
 

3 more replies
Answer Match 45.36%

I am running Windows XP Professional. When i get into the Startup menu within the System Configuration Utility i can see a number of Startup Items listed together with the Command and Location description for each Startup item. The location description is the same for each startup item - "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run." However there are 3 boxes ticked under the Startup Item heading with no startup item details (blank), no details under the Command heading (blank) but under the Location heading it shows - "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run."
Can anyone tell me why I would have details showing under the Location heading in three instances but nothing showing under the corresponding Startup Item and Command headings?
 

A:System Configuration Utility

10 more replies
Answer Match 45.36%

I just noticed that I have blank square boxes under startup item and command fields of the system configuration utility under startup items. Has anyone else seen this? If so what is it and how do I get rid of it.

A:System Configuration utility

I just (today) overcame this...I'm not sure at all how it happened or what may have caused it, so I can't really be of much help.

My situation started a couple of days ago when I suddenly had these messages at startup which referred to files which could not be found. I used a combination of Autoruns, msconfig, and regedit...to track down and manually delete any/all references to these two files. My system now boots up normally .

So...I can't tell you what it was or how it happened but I can say that deleting any/all registry and file references took care of it on my system.

I don't think it was malware of any sort, but I'm no expert at determining such.

Louis

14 more replies
Answer Match 45.36%

Hi,
The below message keeps showing up every time I start my computer. I checked to make sure the utility is set to normal mode, which it is, however it keep showing up.
"You have used the system configuration utility to make changes to the way windows starts.

The system configuration utility is currently in diagnostic or selective startup mode, causing this message to be displayed and the utility to run every time windows starts.

Choose the normal startup mode on the general tab to start windows normally and undo the changed made using the system configuration utility.

(box to tick) Don't show this message or launch the system configuration utility when windows start."
I booted in safe mode and used hijackthis to delete the below line, however once I reboot in normal mode it does not show, however the next time I start my pc it comes back.
O4 - HKLM\..\Run: [MSConfig] C:\WINDOWS\PCHealth\HelpCtr\Binaries\MSConfig.exe /autoO4 - HKLM\..\Run: [MSConfig] C:\WINDOWS\PCHealth\HelpCtr\Binaries\MSConfig.exe /auto
I have attached my hijackthis log below for you perusal.

I hope you can help me get rid of this annoying popup message.

Thanks.

Logfile of HijackThis v1.99.1
Scan saved at 11:58:33 PM, on 24/11/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.5730.0013)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\... Read more

A:System Configuration Utility

From your start button select 'run' then type in MSCONFIG.

If you've made any changes to the startup, here's where it will be. If not it may be time to look at malware.
 

2 more replies
Answer Match 44.94%

Keep scrolling down as pics take up a lot of space.

I am trying to clean out things in my start-up procedure that I don't need when I boot up the computer. Initially I disabled everything. One particular item keeps getting put back on automatically somehow after re-boot. This particular item is related to Dell Support Center. I use it occasionally, but don't need it at startup. This is what is being re-selected. (note checked item)

Here is the process with which I performed this. As stated, Initially I did a <disable all> and clicked on <apply> to which I get a message

I click ok to the message above then <OK> to accept changes and I get the same message again to which I answer ok again. This seems to accept the changes. the next thing I see is the choice to restart or exit without restart. Either way when I do eventually restart I get this message below.

If I simply click ok it seems to keep the changes but dumps me back out to the system configuration Utility screen, which I don't want.

IF I check the box "don't show message or launch system config utility", the next time it I restart or power up again everything is as I selected except it puts the item "sprtcmd" back into the startup procedure again. How can I keep my changes and still not show this message everytime I start up?

 

A:System configuration utility question

10 more replies
Answer Match 44.94%

I have a Toshiba Satellite M55 which on startup a window comes up which states that the "System Configuration Utility" is in Diagnostic mode. Unfortunately the window only flashes on briefly. How do I get to this utility so that I can make the correction to normal mode from the diagnostic mode?

Thanks
 

A:Solved: System Configuration Utility

7 more replies
Answer Match 44.94%

The System Configuration Utility is on automatic prompt when I start up my computer.

I made changes to my services and start ups.

I checked the box to accept the changes and stop the System Configuration Utility from poping up on start up but it continues.

How do I stop it.

Redwin

A:[SOLVED] System Configuration Utility

Download & save SysInternals AutoRuns from Microsoft TechNet -

http://live.sysinternals.com/autoruns.exe

RIGHT-click on autoruns.exe, "Run as Administrator"

Look through list for msconfig.exe. Un-check box if found.

Backup your registry first via creation of a System Restore point -
START | type rstrui

Regards. . .

jcgriff2

`

3 more replies
Answer Match 44.94%

Was wanting to know, as I have come across many who know, but what is the best way to remove entries from the start up folder in system conf. utility ? Have some entries I know belong to programs that no longer are hanging around .
 

A:Solved: system config utility

8 more replies
Answer Match 44.94%

I was investigating ways of starting a PC in safe mode when I noticed that there is no boot.ini tab on my System Configuration Utility. Why is that?. I am running Windows XP Pro.
Any help greatly appreciated.
minder1

More replies
Answer Match 44.94%

My 20 gig hd has 2 logical partitions from long time ago - does anyone know of a FREE utility to do a one time join into 1 logical partition?
 

A:Utility to Eliminate Partitions on XP system??

Please keep in mind that data may be lost with free utilities, I use and recommend Partition Manager 8

Free

Ranish Partition Manager
http://www.ranish.com/part/
Partition Manager is a freeware program that partitions hard disks. It will help you to install and dualboot Linux and multiple copies of Windows. For example, it will let you to run Win ME, Win 2k, and Linux on a single box. Also, using Partition Manager you can copy, move, and resize disk partitions.

Partition Resizer
http://www.zeleps.com/
New features include:

Int13 extensions support allows handling of disks up to 2TB (2048GB) of size.
New Resizing/Moving engine with simpler inerface. Move and resize your partitions in one step.
Transparent extended partition resizing (no more confusion with extended partitions).
Command line parameters for accessing advanced options (read-only operation etc.).

Partition Resizer is a small DOS executable, which requires no installation, and can perform, all these tasks in a short while, giving you the opportunity to re-arrange your partitions safely, quickly and fuss-free.

** I Recommend "Partition Resizer "as a free manager ,but please keep in mind that data may be lost with free utilities, I use and recommend "Partition Manager 8"
3D Partition Manager
http://www.sofotex.com/3D-Partition-Manager-v.-2.37.10-download_L1884.html
3D Partition Manager Publisher's Description:
Partition Manager - create, delete, resize partitions. Format and resize... Read more

2 more replies
Answer Match 44.94%

I operate with Windows XP Home Edition. I have read that I can speed up my start-up by disabling some of the "startup" applications. When I open the msconfig and open tab "startup" there appears to be a lot of applications running. Will I gain from disabling those that I do not need? Is there a way of finding out which ones are needed and which ones can be disabled.
Also is there other things I can do to speed things up?
Thanks,
Syrup
 

A:System Configeration Utility - msconfig

Hello and welcome .. Msconfig is designed to temp disable start up items .. but in the long run it is best to use the programs own control panels to stop them from starting up when you turn on the pc
You can use CCleaner to clear out any junk or ATF

http://www.ccleaner.com/
http://www.atribune.org/content/view/25/2/
 

3 more replies
Answer Match 44.94%

Running XP home

I was trying to network 2 home computers together. I ran the network wizard to do this.
When the computer rebooted I got this message on the screen.

You have used System Configuration Utility to make changes to the way Windows Starts.
The System Configuration Utility is currently in Diagnostic or Selective Startup mode, causing this message to be displayed and the utility to run every time Winddows starts.
Choose the Normal Startup mode on the General Tab to start Windows in nomal mode and undo the changes you made using System Configuration Utility when Windows starts.

The problem is I don't know how to undo this. I tried doing a system restore from the only restore point I had. This is a brand new system just got it yesterday.

I was hoping I could network it to my all Win98 machine to access my files easily. Didn't work.
 

A:Solved: System Configuration Utility

6 more replies
Answer Match 44.94%

Any recommendations on a good generic system utility suite to keep XP home tuned up? Norton System Works as an example.

Thanks

Tom
 

A:System Utility Suite Recommdation

TomHey, I would highly recommend Norton System Work. I have it on my machine and it has done a good job.
 

1 more replies
Answer Match 44.94%

While on Windows XP, Vista and 7, we used a a lot of system utility suits like System Mechanic, Tuneup Utilities and Advanced System Care. But do we really need them in Windows 8? It already does many of the optimization stuff like auto defragging. Installing something like CCleaner which doesn't have background tasks might be more than enough? What do you think?

A:Do we really need third party system utility suits for Win

While on Windows XP, Vista and 7, we used a a lot of system utility suits like System Mechanic, Tuneup Utilities and Advanced System Care



I think you will find many on this forum did not use any of that stuff.

Ccleaner, probably, but that is all.

12 more replies
Answer Match 44.94%

I used the System Configuration Utility to try to remove some of the items that load on startup but things didn't work as I thought. Now whenever I boot up a System Configuration Utility box comes up with this message:
You have used the System Configuration Utility to make changes to the way Windows starts.
The System Configuration Utility is currently in Diagnostic or Selective Startup mode, causing this message to be displayed and the utility to run every time Windows starts.

Choose the Normal Startup mode on the General tab to start Windows normally and undo the changes you made using the System Configuration Utility.

Box: Don't show this message or launch the System Configuration Utility when Windows start.
OK
I checked the box for the "Don't show this message" then clicked OK. Then I opened the System Configuration Utility and on the General tab marked the Normal Startup button, clicked on Apply the closed the utility. Now a box comes up to restart which I do. But when Windows restarts, I get the same System Configuration Utility window.
Anybody know how I fix this?
 

A:System Configuration Utility problem

Once you have used Msconfig to UNselect programs that start at boot time, you will continually be now running in Selective Startup mode.
Selecting Normal will re-select all the UNselected apps.

The first time you UNselect and reboot you will get the window you mention.
Select the option "don't show again" and it should not appear on the next boot.
 

3 more replies
Answer Match 44.94%

I have never had to re-enter the settings and have not copied the current values. Is there an EASY way to have them available if the system crashes or some how they are lost? I could enter the utility, scroll down through the options and write them all down but .......!

I have a Dell XPS 8300 running Windows 7 Home premium.
 

A:Solved: System Setup Utility

Not real sure what your asking here; but if info on your system is it, this free program is one of the best.

http://www.belarc.com/free_download.html
To help us help you,please use the TSG System Info tool to let Tech's know the specs of your computer: http://static.techguy.org/download/SysInfo.exe Copy and paste the results here in your thread. You can use the TSG Info to fill in your computer information in your user profile as well.
 

2 more replies
Answer Match 44.94%

When I run msconfig and go into my startup menu, I have all kinds of programs in there. Can anyone tell me what is and is not necessary. Here's my list of what is running when I log on my computer.

RECGUARD
RUNDLL32
KBD
hpsysdrv
ps2
BlockTracker
hkcmd
bridge
wupdt
ccRegVfy
ccApp
TVTMD
sgtray
CMESys
Loader
Belt
autotbar
pchbutton
rundll32
NoAds
Gator eWallet

Many thanks in advance to anyone who can help me out here.
 

A:Windows XP System Configuration Utility

16 more replies
Answer Match 44.94%

I've noticed that when I run the utility in preparation for posting about some problem, it always shows that my antivirus (Windows Defender) is installed but disabled. I also see this in the scans in the posts of others. Is this a bug? My Defender is most assuredly not disabled.
 

A:Solved: TSG System Info Utility

8 more replies
Answer Match 44.94%

Hi all,

Great site you have here! And my question is when I turn on my computer I always get the "System Config. Utility" window. I cannot get rid of this. I did make a couple of tweaks to the startup tab but cannot remember which ones. I turned them all back on by selecting the "select all" button but still no luck.

Also under the "General" tab I cannot select the Diagnostic Startup.

Any help would be greatly appreciated. Go easy on me I am sort of a nb at this.

A:[SOLVED] System Config. Utility

when the system cofiguration window pops up, there should be a checkbox offering you the option not to show it every time windows loads...

5 more replies
Answer Match 44.94%

Hi! I was trying to get rid of the sprtcmd.exe problem first by using msconf as suggested by someone. I then got rid of that problem by following another method found on the forum. But every time I boot up, I get the system config utility telling me that I have to start up in normal fashion and with enough clicking I get rid of it. But how do I stop making it come up to begin with? Thanks so much.
 

A:Solved: System Configuration Utility

6 more replies
Answer Match 44.94%

Hello all. Using Windows XP SP 2. After I use run, MSCONFIG, and bring up system config utility, I have it on selective startup. It shows Process System.ini.file and it is checked...Process Win.ini.file and it is checked...Load system services has a green highlighted box next to it...Load startup items with a green box...and Use original Boot.ini is checked with a green dot.
Are all of these supposed to be checked and highlighted like this? I've noticed some greater than usual memory usage and cannot remember if these are all supposed to be checked.
Any help or comments appreciated.
Thank you, Tom.

A:System Configuration Utility Question

Hi Ohfer,
Yes that is supposed to be check once you edit/disable/enable something in the startup it will be changed to selective startup. That is normal, the only difference I have is Load system services is checked for mine and yours is higlighted. I don't think it makes a big diffrence though.

Regards,
Extremeboy

2 more replies
Answer Match 44.94%

Greetings to everyone. thanks for reading my first post!

I've read on the Web that this "1" that comes up in Windows System Configuration Utility (Windows XP) is potentially harmful to my computer. To that end, I have two basic questions. (1) Is this true and (2) If so, how do I get rid of it? I've already disabled it from WSCU.

Regards,

John

A:1.exe In Windows System Configuration Utility

to BCProcess File: 1.exe or 1Process Name: Trojan.W32.Tooso1.exe is a process which is registered as the TROJ_SUA.A worm. This virus is distributed via the Internet through e-mail and comes in the form of an e-mail message, in the hopes that you open its hostile attachment. The worm has its own SMTP engine which means it gathers E-mails from your local computer and re-distributes itself. In worst cases this worm can allow attackers to access your computer, stealing passwords and personal data. This process is a security risk and should be removed from your system.http://www.liutilities.com/products/wintas...ocesslibrary/1/Trojans are very dangerous because they provide a means of accessing a computer system that bypasses security mechanisms. Remote attackers use backdoor Trojans as part of an exploit to to gain unauthorized access to a computer and take control of it without your knowledge. If your computer was used for online banking or has credit card information on it, all passwords should be changed immediately to include those used for email, eBay and forums. You should consider all your passwords to be compromised. They should be changed by using a different computer and not the infected one. Do not change passwords or do any transactions while using the infected computer because an attacker may get the new passwords and transaction information. Banking and credit card institutions should be notified of the possible security breech.Download and scan with SUPERAntiSypwa... Read more

8 more replies
Answer Match 44.94%

I cannot close the system configuration utility after opening it. I opened it up to disable a program and now I cannot close it. I have to use task manager to close it.
 

A:System configuration utility problem

System Configuration Utility would run at startup. This can be resolved by putting a check mark on the checkbox on the first screen that comes up saying System Configuration Utiity has been modified.

The Check Box would say "Do not show msconfig at startup"
 

1 more replies
Answer Match 44.94%

Why are companies so irresponsible and don't provide an uninstall option that removes all the garbage they install on your system?
 
Few minutes ago I was able to completely remove the Blackberry desktop software that I was no longer using and was bothering when copying files. But for that I had to spent hours using cleaners, disk search utilities and registry managers to get rid of every piece of trash.
 
Right now I have registry entries and drivers and garbage from Sierra Broadband aircard wireless modem that I'm no longer using but if I try to remove trashes all my network setting. And there I have to left all those drivers and registry keys bloating my system.
 
So, is there an utility that tracks every minute change on your system when you install a software so that you can uninstall software removing every piece of crap without damaging your system???

A:Utility to track installations and changes in your system ???

I don't know of anything that tracks changes for normal users, but if you need to remove a software completely then I suggest Revo Uninstaller. It's a very powerful uninstaller that can hunt down remnants and remove them effectively.

4 more replies
Answer Match 44.94%

Is there a better utility software than Norton Systme Works that runs from the CD rom in any computer? I use my system works 2003 disc to fix other peoples computers but am looking for any better product to purchase as this one is probably getting out of date. I have read bad reviews on the Norton 2005. What do the pros use at the computer shops to fix computers. I want one that runs from the CD and dont need to be installed in order to use it.
 

A:Solved: System Utility software

fix what exactly?
In my experience Norton causes more problems then its worth...

what exactly are you looking to fix? or do?
 

3 more replies
Answer Match 44.94%

whenever i start up my PC, i get System Configuration Utility Message, despite checking the box saying i don't want the message displayed everytime

also i get a registry change denied message from spybot

i'm worried that i have malware of some sort

what do i do?

thanks in advance
 

A:System Configuration Utility Message

bump
 

1 more replies
Answer Match 44.94%

I have a COMPAQ laptop,Windows XP Home Edition
Each time I start up my computer, the following message shows up:

"You have used the System Configuration Utility to make changes to the way Windows starts. The System Configuration Utility is currently in Diagnostic or Selective Startup mode, causing this message to be displayed and the utility to run every time Windows starts. Choose the Normal Startup mode on the general tab to start Windows normally and undo the changes you made using the System Configuration Utility."

I have already checked the "Normal Startup" box but after restarting, the message pops up again.
I can't even connect to the internet, and my anti-virus doesn't detect anything bad. HELP PLEASE!!
 

A:System Configuration Utility error

9 more replies
Answer Match 44.94%

Have no entries in SYSTEM.INI or WIN .INI ? Both are checked on the general page could some one please tell me why this has taken place ?
 

A:Solved: system config utility

6 more replies
Answer Match 44.94%

Son calls me last night with this problem.
When booting up, the Sys Config Util comes up with the usual canned statement. He has not made any changes. Clicks Don't show this again then clicks OK. Reboots and again it comes up. He is the only user and administrator. Can't seem to solve it for him. Any ideas fellas?
 

A:Solved: System Config Utility won't go away

14 more replies
Answer Match 44.94%

I have Windows XP SP3 installed on my desktop.
I'm trying to change startup items by going torun then "msconfig" (and it brings me to the system configuration utility) and go to the startup tab. When I go to change some items in the startup and press OK, I get an error message stating that "an access deny was returned while attempting to change a service. You may need to log on as administrator account to make the specified changes. The problme is tha I am logged on as adminstrator. How can I solve this problem?

Thanks,

joe
 

A:Windows XP System Configuration Utility

16 more replies
Answer Match 44.94%

I have decided to spend some time trying to reduce my processes in my task manager. I am up to 66 on with WIN 64XP Pro and it's taking a long time to finish booting.

As I started this process, I checked out my System Configuration Utility and found an odd item in the startup list.

It's listed simply as a startup item called cQE with a command listed only as cQE also. The location of it is as follows.

SOFTWARE\wow6432Node\microsoft\windows\currentversion\Run

When I go to my registry, I can find that series under HKEY_LOCAL_MACHINE but cQE isn't found in Run. I can't find that series anywhere else in the registry but I may not know where to look.

Can someone tell me if this item is dangerous and if so, how to remove it?
Thanks
 

A:Mysterious cQE in System Configuration Utility

Is it still enabled?

You'll have to find out what it is before you can decide whether to keep it. Where is the program located?

Check a startup manager (I like Startup CPL):

Ashampoo Startup Tuner
Startup Control Panel
MZ Startup Manager
Startup Control Panel (Exe version for Vista)
Emsa Startup Manager
EM Startup Manager
WheresJames Startup Manager

Startup Programs Reference
Startup Database (bleepingcomputer)

If all else fails, you can see all your startups with Autoruns.

Do you have a Gigabyte board? If you do, and this exists: C:\Program Files\GIGABYTE\GEST\GSvr.exe, then it is a power-management utility.

There are also Trojans with that name, and a rootkit could have an entry in that registry location that is invisible to you.
 

3 more replies
Answer Match 44.94%

ok so i go into startup and uncheck the programs i dont want to use in startup and it changes options in the general tab from normal startup to selective start up which than opens up different options... i dont no wat one s to check these options include: process system.ini file, process win.ini file, load system services, and load startup items... i have the option to check all or none of them but i dont no what any of these mean

A:What options do i want for system configuration utility

DO NOT use msconfig to manage startup options. And don't uncheck anything you don't understand. Download and use Mike Lin's Startup Control Panel to manage startup items. It will not let you remove anything that will cause problems.

6 more replies
Answer Match 44.52%

I own a Sony VAIO VGN-FS742/W with XP Home SP2 running on it. For a week now, I've been trying to get the System Configuration Utility popup window to stop appearing everytime I bootup my machine. I've even gone as far as disable all of whats in STARTUP tab. Which didn't resolve a thing. Everytime I click on radio buttom to not showup but it still does. Is there any kind of Registry Hack that can be done to stop this?
 

A:System Configuration Utility popup window

16 more replies
Answer Match 44.52%

After running msconfig and using the selective startup mode, I rebooted and the System Configuration Utility screen keeps poping up and I have checked the box that tells it not to load.

Why is it doing this all of a sudden and how do I stop it.

tks
Gman
 

A:System Configuration Utility keeps shwoing up on Reboot

Stop the Selective Startup Screen (Line 173)
http://www.kellys-korner-xp.com/xp_tweaks.htm

Manual Edit:

Go to Start/Run/Regedit and navigate to this key and delete it.

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\
CurrentVersion\Run\MSConfig

or:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\
CurrentVersion\Run\MSConfigReminder
 

3 more replies
Answer Match 44.52%

Ok before I get flamed I work for AOL Tech Support. Yes yes I know I know, I don't enjoy it but it pays the bills.

Ok so I get calls of all kinds here ranging fromt he stupid to the just plain weird and I came across 2 calls abck to back who had the same problem in the System Configuration utility and was wondering if anyone on ehre knew what it might mean cause I was at a loss.

Just to give a little background on both computers I was teching over the phone both had Windows XP. one had SP1 and the other had SP2.

The First Call:

It was a Dell Computer with Windows XP SP2. He had previously had AOL 9.0 Optimized installed on his computer and then uninstalled and reinstalled AOL 9.0 VR (Vista Ready). He was complaining of experiencing some slowness and AOL freezing. So I checked his processess and they were 29 or 30 which is a good number for XP so then I proceeded to do the normal AOL fixes which fixed the AOL's slowness and freezing. So I thoguht I should try one more thing so I did a MSCONFIG just to see his system configuration utility and to my surprise he was in selective startup and instead of there being a check mark in Load Startup Items there was a green box and all the checkmark boxes were green. Everytime we clicked on Load Startup items the green box would disappear and the text would gray out.
The Second Call:

It was a Compaq Presario with Windows XP SP1. Experiencing same problems as above, AOL slow and freezing. Checked processes and it was 29. ... Read more

A:Strange problem in System Configuration Utility

8 more replies
Answer Match 44.52%

I reviewed the above post and while it is extremely informative, I'm not sure it can solve my problem.

Here's what I'm concerned about. In my system configuration utility, when I click on the start up tab, I see the list of programs that are selected or not selected in my start up. I notice "bikini.exe" is listed as one of the start up programs. It has been de-selected by me so it does not start up when I boot my computer. However, the program remains! I've tried a number of software "clean-up" programs to try and get rid of this "bikini.exe" program which resides in my system configuration utility and I can't get rid of it. My computer seems to work fine and I'm not having any operational problems although I am having intermitten problems with my browser (using MS Internet Explorer) as some Web sites that I visit I'm unable to stay at as my brower takes me to a site that tells me it can't find the site I was just at.

Anyway, the point of this post is that I don't understand how to get rid of the bikini.exe file which is listed in my system configuration utility, in the list of programs in the start-up tab but its not selected but I don't know how to get rid of it.

Nothing I have downloaded to clean out my computer has worked. Any suggestions??

Many thanks!!
 

A:bikini.exe will not be deleted from my system configuration utility

9 more replies
Answer Match 44.52%

Does someone know where I could download a System Diagnostic Utility For Windows XP Pro?

I'm haveing some problems with my pc, and I thought if that would help.
 

A:Solved: System Diagnostic Utility For Windows XP Pro

16 more replies
Answer Match 44.52%

Startup item with no name in System Configuration Utility. I opened the System Configuration Utility>start up tab>and saw there is this item listed that has no name. the key is HKLM\SOFTWARE\MICROSOFT\WINDOWS\CURRENT VERSION\RUN
It is listed between Acrotray and msmsgs.

What could this be?

Widows XPPRO SP3

A:Startup item with no name in System Configuration Utility

Quote:





Originally Posted by rentonhighlands


Startup item with no name in System Configuration Utility. I opened the System Configuration Utility>start up tab>and saw there is this item listed that has no name. the key is HKLM\SOFTWARE\MICROSOFT\WINDOWS\CURRENT VERSION\RUN
It is listed between Acrotray and msmsgs.

What could this be?

Widows XPPRO SP3




Most likely something you have uninstalled at some point!

6 more replies
Answer Match 44.52%

What is the operation of "dumprep 0 -k"? It is on my statrup menu and I have never seen it there before. It is also on hijack this listed as "04 - HKLM\..\Run: [KernelFaultCheck] C:\WINDOWS\system32\dumprep0 -k". My computer hasn't been running as smoothly for the past 3 weeks and start ups have been slow. Could this be a trojan of some kind? How would I get this off my computer? I believe it also ate my calculator and a few other programs in the last few weeks.Moderator Edit: Moved topic to more appropriate forum and added a topic descriptor. ~ Animal

A:Dumprep 0 -k In Startup; System Config Utility

Take a look HERE. And ask any further questions HEREBTW Welcome to bleepingcomputer pcolancecco01

1 more replies
Answer Match 44.52%

Ok I decided to reformat one of my older computers just to get it freshly cleaned because windows 2000 was buggering up so, I tried WW6 system eraser utility. I'm not sure if anyone else has used it but if you do, don't. I reformated my 8.4 gig hard drive under the DOD erase option and after it done its passes I started loading up my windows but when I was going to install it on hte drive it showed I onlyhad 7.5 gigs and when I went back to system eraser it showed my drive was 8.4 gigs but when it reformated again it only reformated 7.5 gigs of space I contacted webroot with no reply yet but I'm really worried that window washer screwed up my old harddrive I dunno just letting you people know and if any one does have a fix around this problem, please do tell. I treid loading it up again with [email protected] Killdisk and that one showed I only had 7.5 gigs of space so, yeah I think it's done for good, still works though just smaller......
 

More replies
Answer Match 44.52%

I recently performed a clean install of Windows 10 on my Satellite L50-B, which removed all toshiba applications from my device. It also switched the default function of the f1-f12 keys, so I now need to press the Fn button to control volume, brightness etc.

I have seen that the way to rectify this is to change the settings in the Toshiba System Settings utility, however this has been removed from the device.

Is there a way to download and install the system settings utility?

More replies
Answer Match 44.52%

Hi, I wanna ask should I install Dell System Software Utility? www.dell.com/.../DriversDetails It's one of recommended and first driver/update in installation order, but I don't know and don't find enoght info about, so don't know install it, or no. Some people say that helps correctly install driver, from other side it's from 2010, and can be outdated? What to do? Windows 7 x64.
Also what drivers I should install? Dell vostro 3750? First i need install drivers, or windows 7 updates?

More replies
Answer Match 44.52%

Dell Optiplex running WinXP Pro from a reinstallation, not OEM

At startup I always get a window telling me I have "used the System Configuration Utility to make changes to the way Windows starts", which is totally untrue.

It then offers me a box to check to "Don't show this message or launch the System Configuration Utility when Windows starts". I haven't checked the box (yet) because I'm afraid I won't be able to ever launch the Utility. So my question is: if I check the box to keep ity from launching at startup, will I be able to run it later run/msconfig?
 

A:If System Configuration Utility doesn't run at startup, can I run it later?

yes you can check the box so that this doesnt show on startup all the time and you can run msconfig at any time via the run option in your start menu.
 

1 more replies
Answer Match 44.52%

well i went to check to see what was there and i think thats the problem that makes no icons and control panel won't show up when i want them to come up and the menu bar never shows up til i write in task manager start menu its only there for 2 seconds
well in system configuration utility i go to services and there are alot of things that say that they have stopped like: computer browser,removable storage,remote access auto connection manager,remote desktop help session manager,logical disk manager administrative service and alot more so does anyone know what this means and i think this is causeing the computer not to let me see my desktop and the bar where is says start as well as letting me use my documents,cumputer,videos, and others like control panel and system restore so can anyone help me please
 

A:in my system configuration utility some services have stopped

Welcome to TSG....

To download HJTsetup.exe from TrendSecure To Download HijackThis go to the following at the File Repository
Click on the link below to Download HijackThis Self Installer:

http://www.trendsecure.com/portal/en-US/threat_analytics/HJTInstall.exe

Save the file to your desktop.
Double click on the HJTsetup.exe icon on your desktop.
By default it will install to C:\Program Files\HijackThis.
Continue to click Next in the setup dialog boxes until you get to the Select Additional Tasks dialog.
Put a check by Create a desktop icon then click Next again.
Continue to follow the rest of the prompts from there.
At the final dialog box click Finish and it will launch Hijack This.
Click on the Do a system scan and save a log file button. It will scan and then ask you to save the log.
Click Save to save the log file and then the log will open in notepad.
At the top of the Notepad HJT log screen, hit Edit then Select All then click Edit and then click Copy doing that copies the text to the clipboard, you won't see it yet....
Come back here to this thread and Paste the log in your next reply.
DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required.
A security expert with a gold shield to the right of their name should take a look at your log - please be patient.
 

1 more replies
Answer Match 44.52%

Ok I have HP Pavilion HP Pavilion dv6-7204es which became faulty after BIOS update ..just noise after powering it up no screen .the problem is when I use "HP system BIOS update utility " to create bootable USB ,the option to do so is not avalibe !!I dont now why!LIke the photo below:I have tried many usb sticks with no luckI downloaded the tool from the following linkhttp://ftp.hp.com/pub/softpaq/sp68001-68500/sp68425.exe  

A:HP system BIOS update utility not working

Hello @walidwithu?, Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community! I came across your post about the BIOS issue, and wanted to help! First, try reviewing the following document, and let me know how it goes:HP Notebook PCs - Restoring the BIOS Please let me know if this information helps you resolve the issue by marking this post as  "Accept as Solution" , this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great weekend!

3 more replies
Answer Match 44.52%

Hello,

I was going through the programs which are set to start up in the System Configuration Utility, actually going through a list that I found of unnecessary programs which take up CPU and could be turned off safely, as my computer has been very slow for some reason.

There is a program called "1" listed, and it shows it's location in Windows (HKCU\Software\Microsoft\Windows\Current Version). The glossary I was using shows a program called "1.exe" listed as a Trojan. However as I stated, it's listed only as "1" as running in my startup programs (1 without the quotations.)

Is this a legitimate program and if so what is it? My antivirus, etc... does not detect it as a virus or trojan.

Any help with this would be greatly appreciated.

Thank You,
Kleigh

A:System Configuration Utility/startup Programs

In addition to the above, the changes that I made yesterday (I disabled several unnecessary programs) are now enabled again. The changes that I made didn't remain for some reason and I don't know why. My computer has been acting terribly slow and none of the utilities I use have found anything. I get a lot of alerts on Zonealarm, and don't know how many of these are actual intrusion attempts, but I am and have been very concerned about security. I know this is a lot, but any help with these things would be appreciated. I am using Windows XP Home edition.

Kleigh

22 more replies
Answer Match 44.52%

Hi, I have a question about using Norton System Works 2004- Im looking for a good utility suite and have been reading alot of negative reviews about System Works, especially with XP. Is it worth using, or am I setting myself up for more trouble by installing it?
Thanks for your feedback!
 

A:Norton System Works? Which is the best utility suite?

12 more replies
Answer Match 44.52%

My laptop has developed a problem where the System Configuration Utility dialog box appears at every boot. I'm running XP Home edition. This occurs even though I've selected "Normal" startup. Also, I can check the box to not show this dialog box again, yet it continues to appear. After appearing, it will tell me that I must reboot for the changes to become effective.

I've run spyware detectors and antivirus scanners but have come up with nothing. I downloaded a program Startup Monitor to see if it would identify anything. The message that I get upon boot with it is: "The program MSConfig has registered the executable C:\Windows\PCHealth\HelpCtr\Binaries\MSConfig.exe/auto to run at system startup"

Any thoughts about what might be going on?

Thanks for your help.
 

A:System Configuration Utility Appearing at every startup

9 more replies
Answer Match 44.52%

Hi, I've got Vista and I've had a few computer restarts and one BSOD. Now on my XP machine I used to use Norton Systemworks 2003 and used that one-click-checkup that would go through and fix any problems it found in XP. Since Vista gives me a compatiblity warning with Systemwrorks 2003, I'm looking for a new system utility to replace that one. I went out and bought System Mechanic 7 (not opened yet), but it looks like from reviews that the software is very buggy and not worthwhile. Before I return it, anyone have any suggestions on a good system utility software that works well with Vista? Thanks.
 

A:Good system utility software for maintenance

I've found Tune Up Utilities a good program for this:

http://www.tune-up.com/products/tuneup-utilities/

It also has the 1-click Maintenance option. I use that between running the full program. Have been using on 2 systems for several years. It is now Vista compatible,
 

6 more replies
Answer Match 44.52%

UPON RESTART OR START system config. utility flashes for about 5 seconds.
How do I defeat this?-----------Guzz

A:system configuration utility always appears on startup

Hi

You can download and install Autoruns from this site: http://technet.microsoft.com/en-us/s...rnals/bb963902
Once installed run the autoruns.exe application. Agree to the EULA. Wait for autoruns to finish gathering info.
Once done go to file -> save -> then save the file to your desktop.
Attach it to your next post.

Note do not delete or unmark/deselect any of the items in Autoruns.

2 more replies
Answer Match 44.52%

I removed some items from startup in the system configuration utility and ever since then and despite checking not appear again after every boot the message that system configuration utility was used sill appears. Any suggestions to stop it?
 

More replies
Answer Match 44.52%

Hey All,

I have Windows XP (SP-3) with all updates installed. I am familiar with Disk Defrag and the Check Disk Utility chkdsk. But what does SFC actually do? Can I run it in Safe Mode? (I always do for Defrag and Check Disk.)

What do I type at the Command Prompt to run it? (If it asks for my Windows Installation Disk.) My hard drive is C. I have a CR-R drive that is D, and a CD/DVD RW drive which is drive E The file path confuses me. Is it:

C:/

D:/

or

E:/?

If SFC finds missing files, I understand it will repair them. If it does, will I have to re-run or reinstall Windows Updates again or SP-3? or is SFC smart enough where that would not be necessary? Running this utility is not going to make things worse, is it?

Jack
 

A:What is the System File Checker (sfc/scannow) Utility

SFC doesn't replace missing files. It has no way to know what is not there. It only compares a hash of Windows-only files to the originals and replaces them if it is different.

sfc /scannow will start it and you'll need the XP CD of your version of Windows (same service pack level) to be in the CD-ROM.
 

1 more replies